Mefa PDF

www.scrmechrocks.blogspot.
com
kumaraswamireddy
Mighty mech
UNIT-I
INTRODUCTION TO MANAGERIAL ECONOMICS
Imagine for a while that you have finished your studies and have joined as an
engineer in a manufacturing organization. What do you do there? You plan to
produce maximum quantity of goods of a given quality at a reasonable cost.
On the other hand, if you are a sale manager, you have to sell a maximum
amount of goods with minimum advertisement costs. In other words, you
want to minimize your costs and maximize your returns and by doing so, you
are practicing the principles of managerial economics.
Managers, in their day-to-day activities, are always confronted with several
issues such as how much quantity is to be supplied; at what price; should the
product be made internally; or whether it should be bought from outside; how
much quantity is to be produced to make a given amount of profit and so on.
Managerial economics provides us a basic insight into seeking solutions for
managerial problems.
Managerial economics, as the name itself implies, is an offshoot of two
distinct disciplines: Economics and Management. In other words, it is
necessary to understand what these disciplines are, at least in brief, to
understand the nature and scope of managerial economics.
Introduction to Economics
Economics is a study of human activity both at individual and national level.
The economists of early age treated economics merely as the science of
wealth. The reason for this is clear. Every one of us in involved in efforts
aimed at earning money and spending this money to satisfy our wants such
as food, Clothing, shelter, and others. Such activities of earning and spending
money are called
Economic activities. It was only during the eighteenth century that Adam
Smith, the Father of Economics, defined economics as the study of nature and
uses of national wealth.
Dr. Alfred Marshall, one of the greatest economists of the nineteenth century,
writes Economics is a study of mans actions in the ordinary business of life:
it enquires how he gets his income and how he uses it. Thus, it is one side, a
study of wealth; and on the other, and more important side; it is the study of
man. As Marshall observed, the chief aim of economics is to promote human
welfare, but not wealth. The definition given by AC Pigou endorses the
opinion of Marshall. Pigou defines Economics as the study of economic
MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS
1
www.scrmechrocks.blogspot.com
kumaraswamireddy
Mighty mech
welfare that can be brought directly and indirectly, into relationship with the
measuring rod of money.
Prof. Lionel Robbins defined Economics as the science, which studies human
behaviour as a relationship between ends and scarce means which have
alternative uses. With this, the focus of economics shifted from wealth to
human behaviour.
Lord Keynes defined economics as the study of the administration of scarce
means and the determinants of employments and income.
Microeconomics
The study of an individual consumer or a firm is called microeconomics (also
called the Theory of Firm). Micro means one millionth. Microeconomics deals
with behavior and problems of single individual and of micro organization.
Managerial economics has its roots in microeconomics and it deals with the
micro or individual enterprises. It is concerned with the application of the
concepts such as price theory, Law of Demand and theories of market
structure and so on.
Macroeconomics
The study of aggregate or total level of economics activity in a country is
called macroeconomics. It studies the flow of economics resources or factors
of production (such as land, labour, capital, organisation and technology)
from the resource owner to the business firms and then from the business
firms to the households. It deals with total aggregates, for instance, total
national income total employment, output and total investment. It studies the
interrelations among various aggregates and examines their nature and
behaviour, their determination and causes of fluctuations in the. It deals with
the price level in general, instead of studying the prices of individual
commodities. It is concerned with the level of employment in the economy. It
discusses aggregate consumption, aggregate investment, price level, and
payment, theories of employment, and so on.
Though macroeconomics provides the necessary framework in term of
government policies etc., for the firm to act upon dealing with analysis of
business conditions, it has less direct relevance in the study of theory of firm.
Management
Management is the science and art of getting things done through people in
formally organized groups. It is necessary that every organisation be well
2
kumaraswamireddy
Mighty mech
managed to enable it to achieve its desired goals. Management includes a

number of functions: Planning, organizing, staffing, directing, and controlling.
The manager while directing the efforts of his staff communicates to them the
goals,
objectives,
policies,
and
procedures;
coordinates
their
efforts;
motivates them to sustain their enthusiasm; and leads them to achieve the
corporate goals.
Welfare Economics
Welfare economics is that branch of economics, which primarily deals with
taking of poverty, famine and distribution of wealth in an economy. This is
also called Development Economics. The central focus of welfare economics is
to assess how well things are going for the members of the society. If certain
things have gone terribly bad in some situation, it is necessary to explain why
things have gone wrong. Prof. Amartya Sen was awarded the Nobel Prize in
Economics in 1998 in recognition of his contributions to welfare economics.
Prof. Sen gained recognition for his studies of the 1974 famine in Bangladesh.
His work has challenged the common view that food shortage is the major
cause of famine.
In the words of Prof. Sen, famines can occur even when the food supply is
high but people cannot buy the food because they dont have money. There
has never been a famine in a democratic country because leaders of those
nations are spurred into action by politics and free media. In undemocratic
countries, the rulers are unaffected by famine and there is no one to hold
them accountable, even when millions die.
Welfare economics takes care of what managerial economics tends to ignore.
In other words, the growth for an economic growth with societal upliftment is
countered productive. In times of crisis, what comes to the rescue of people is
their won literacy, public health facilities, a system of food distribution, stable
democracy, social safety, (that is, systems or policies that take care of people
when things go wrong for one reason or other).
Managerial Economics
Introduction
Managerial Economics as a subject gained popularity in USA after the
publication of the book Managerial Economics by Joel Dean in 1951.
Managerial Economics refers to the firms decision making process. It could
be also interpreted as Economics of Management or Economics of
3
kumaraswamireddy
Mighty mech
Management. Managerial Economics is also called as Industrial Economics

or Business Economics.
As Joel Dean observes managerial economics shows how economic analysis
can be used in formulating polices.
Meaning & Definition:

In the words of E. F. Brigham and J. L. Pappas Managerial Economics is the
applications of economics theory and methodology to business administration
practice.
Managerial Economics bridges the gap between traditional economics theory
and real business practices in two days. First it provides a number of tools
and techniques to enable the manager to become more competent to take
decisions in real and practical situations. Secondly it serves as an integrating
course to show the interaction between various areas in which the firm
operates.
C. I. Savage & T. R. Small therefore believes that managerial economics is
concerned with business efficiency.
M. H. Spencer and Louis Siegelman explain the Managerial Economics is the
integration of economic theory with business practice for the purpose of
facilitating decision making and forward planning by management.
It is clear, therefore, that managerial economics deals with economic aspects
of managerial decisions of with those managerial decisions, which have an
economics contest. Managerial economics may therefore, be defined as a
body of knowledge, techniques and practices which give substance to those
economic concepts which are useful in deciding the business strategy of a unit
of management.
Managerial economics is designed to provide a rigorous treatment of those
aspects of economic theory and analysis that are most use for managerial
decision analysis says J. L. Pappas and E. F. Brigham.
Managerial Economics, therefore, focuses on those tools and techniques,
which are useful in decision-making.

4
kumaraswamireddy
Mighty mech
Nature of Managerial Economics

Managerial economics is, perhaps, the youngest of all the social sciences.
Since it originates from Economics, it has the basis features of economics,
such as assuming that other things remaining the same (or the Latin
equivalent ceteris paribus). This assumption is made to simplify the
complexity of the managerial phenomenon under study in a dynamic business
environment so many things are changing simultaneously. This set a
limitation that we cannot really hold other things remaining the same. In such
a case, the observations made out of such a study will have a limited purpose
or value. Managerial economics also has inherited this problem from
economics.
Further, it is assumed that the firm or the buyer acts in a rational manner
(which normally does not happen). The buyer is carried away by the
advertisements, brand loyalties, incentives and so on, and, therefore, the
innate behaviour of the consumer will be rational is not a realistic assumption.
Unfortunately, there are no other alternatives to understand the subject other
than by making such assumptions. This is because the behaviour of a firm or
a consumer is a complex phenomenon.
The other features of managerial economics are explained as below:

(a) Close to microeconomics: Managerial economics is concerned with
finding the solutions for different managerial problems of a particular
firm. Thus, it is more close to microeconomics.
(b) Operates
against
the
backdrop
of
macroeconomics:
The
macroeconomics conditions of the economy are also seen as limiting

factors for the firm to operate. In other words, the managerial
economist has to be aware of the limits set by the macroeconomics
conditions such as government industrial policy, inflation and so on.
(c) Normative statements: A normative statement usually includes or
implies the words ought or should. They reflect peoples moral
attitudes and are expressions of what a team of people ought to do.
For instance, it deals with statements such as Government of India
should open up the economy. Such statement are based on value
judgments and express views of what is good or bad, right or
wrong. One problem with normative statements is that they cannot to
verify by looking at the facts, because they mostly deal with the
future. Disagreements about such statements are usually settled by
voting on them.

5
kumaraswamireddy
Mighty mech
(d) Prescriptive actions: Prescriptive action is goal oriented. Given a

problem and the objectives of the firm, it suggests the course of
action from the available alternatives for optimal solution. If does not
merely mention the concept, it also explains whether the concept can
be applied in a given context on not. For instance, the fact that
variable costs are marginal costs can be used to judge the feasibility
of an export order.
(e) Applied in nature: Models are built to reflect the real life complex
business situations and these models are of immense help to
managers for decision-making. The different areas where models are
extensively used include inventory control, optimization, project
management etc. In managerial economics, we also employ case
study methods to conceptualize the problem, identify that alternative
and determine the best course of action.
(f) Offers scope to evaluate each alternative: Managerial economics
provides an opportunity to evaluate each alternative in terms of its
costs and revenue. The managerial economist can decide which is the
better alternative to maximize the profits for the firm.
(g) Interdisciplinary: The contents, tools and techniques of managerial
economics are drawn from different subjects such as economics,
management,
mathematics,
statistics,
accountancy,
psychology,
organizational behavior, sociology and etc.

(h) Assumptions
and
limitations:
Every
concept
and
theory
of
managerial economics is based on certain assumption and as such

their validity is not universal. Where there is change in assumptions,
the theory may not hold good at all.
Scope of Managerial Economics:

The scope of managerial economics refers to its area of study. Managerial
economics refers to its area of study. Managerial economics, Provides
management with a strategic planning tool that can be used to get a clear
perspective of the way the business world works and what can be done to
maintain profitability in an ever-changing environment. Managerial economics
is primarily concerned with the application of economic principles and theories
to five types
of resource decisions made by all types
of business
organizations.
a. The selection of product or service to be produced.
b. The choice of production methods and resource combinations.
c. The determination of the best price and quantity combination
d. Promotional strategy and activities.
6
kumaraswamireddy
Mighty mech
e. The selection of the location from which to produce and sell goods or
service to consumer.
The production department, marketing and sales department and the finance
department usually handle these five types of decisions.
The scope of managerial economics covers two areas of decision making
a. Operational or Internal issues
b. Environmental or External issues
a. Operational issues:
Operational issues refer to those, which wise within the business organization
and they are under the control of the management. Those are:
1. Theory of demand and Demand Forecasting
2. Pricing and Competitive strategy
3. Production cost analysis
4. Resource allocation
5. Profit analysis
6. Capital or Investment analysis
7. Strategic planning
1. Demand Analyses and Forecasting:
A firm can survive only if it is able to the demand for its product at the right
time, within the right quantity. Understanding the basic concepts of demand
is essential for demand forecasting. Demand analysis should be a basic
activity of the firm because many of the other activities of the firms depend
upon the outcome of the demand fore cost. Demand analysis provides:
1. The basis for analyzing market influences on the firms; products and
thus helps in the adaptation to those influences.
2. Demand analysis also highlights for factors, which influence the
demand for a product. This helps to manipulate demand. Thus demand
analysis studies not only the price elasticity but also income elasticity,
cross elasticity as well as the influence of advertising expenditure with
the advent of computers, demand forecasting has become an
increasingly important function of managerial economics.
2. Pricing and competitive strategy:
Pricing decisions have been always within the preview of managerial
economics. Pricing policies are merely a subset of broader class of managerial
economic problems. Price theory helps to explain how prices are determined
under different types of market conditions. Competitions analysis includes the
7
kumaraswamireddy
Mighty mech
anticipation of the response of competitions the firms pricing, advertising and

marketing strategies. Product line pricing and price forecasting occupy an
important place here.
3. Production and cost analysis:
Production analysis is in physical terms. While the cost analysis is in monetary
terms cost concepts and classifications, cost-out-put relationships, economies
and diseconomies of scale and production functions are some of the points
constituting cost and production analysis.
4. Resource Allocation:
Managerial Economics is the traditional economic theory that is concerned
with the problem of optimum allocation of scarce resources. Marginal analysis
is applied to the problem of determining the level of output, which maximizes
profit. In this respect linear programming techniques has been used to solve
optimization problems. In fact lines programming is one of the most practical
and powerful managerial decision making tools currently available.
5. Profit analysis:
Profit making is the major goal of firms. There are several constraints here an
account of competition from other products, changing input prices and
changing business environment hence in spite of careful planning, there is
always certain risk involved. Managerial economics deals with techniques of
averting of minimizing risks. Profit theory guides in the measurement and
management of profit, in calculating the pure return on capital, besides future
profit planning.
6. Capital or investment analyses:
Capital is the foundation of business. Lack of capital may result in small size
of operations. Availability of capital from various sources like equity capital,
institutional finance etc. may help to undertake large-scale operations. Hence
efficient allocation and management of capital is one of the most important
tasks of the managers. The major issues related to capital analysis are:
1. The choice of investment project
2. Evaluation of the efficiency of capital
3. Most efficient allocation of capital

8
kumaraswamireddy
Mighty mech
Knowledge of capital theory can help very much in taking investment

decisions. This involves, capital budgeting, feasibility studies, analysis of cost
of capital etc.
7. Strategic planning:
Strategic planning provides management with a framework on which longterm decisions can be made which has an impact on the behavior of the firm.
The firm sets certain long-term goals and objectives and selects the
strategies to achieve the same. Strategic planning is now a new addition to
the scope of managerial economics with the emergence of multinational
corporations. The perspective of strategic planning is global.
It is in contrast to project planning which focuses on a specific project or
activity. In fact the integration of managerial economics and strategic
planning has given rise to be new area of study called corporate economics.
B. Environmental or External Issues:

An environmental issue in managerial economics refers to the general
business environment in which the firm operates. They refer to general
economic, social and political atmosphere within which the firm operates. A
study of economic environment should include:
a. The type of economic system in the country.
b. The general trends in production, employment, income, prices, saving
and investment.
c. Trends in the working of financial institutions like banks, financial
corporations, insurance companies
d. Magnitude and trends in foreign trade;
e. Trends in labour and capital markets;
f. Governments economic policies viz. industrial policy monetary policy,
fiscal policy, price policy etc.
The social environment refers to social structure as well as social organization
like trade unions, consumers co-operative etc. The Political environment
refers to the nature of state activity, chiefly states attitude towards private
business, political stability etc.
The environmental issues highlight the social objective of a firm i.e.; the firm
owes a responsibility to the society. Private gains of the firm alone cannot be
the goal.
9
kumaraswamireddy
Mighty mech
The environmental or external issues relate managerial economics to macro

economic theory while operational issues relate the scope to micro economic
theory. The scope of managerial economics is ever widening with the dynamic
role of big firms in a society.
Managerial economics relationship with other disciplines:

Many new subjects have evolved in recent years due to the interaction among
basic disciplines. While there are many such new subjects in natural and
social sciences, managerial economics can be taken as the best example of
such a phenomenon among social sciences. Hence it is necessary to trace its
roots and relation ship with other disciplines.
1. Relationship with economics:
The relationship between managerial economics and economics theory may
be viewed form the point of view of the two approaches to the subject Viz.
Micro Economics and Marco Economics. Microeconomics is the study of the
economic behavior of individuals, firms and other such micro organizations.
Managerial economics is rooted in Micro Economic theory. Managerial
Economics makes use to several Micro Economic concepts such as marginal
cost, marginal revenue, elasticity of demand as well as price theory and
theories of market structure to name only a few. Macro theory on the other
hand is the study of the economy as a whole. It deals with the analysis of
national income, the level of employment, general price level, consumption
and investment in the economy and even matters related to international
trade, Money, public finance, etc.
The relationship between managerial economics and economics theory is like
that of engineering science to physics or of medicine to biology. Managerial
economics has an applied bias and its wider scope lies in applying economic
theory to solve real life problems of enterprises. Both managerial economics
and economics deal with problems of scarcity and resource allocation.
2. Management theory and accounting:
Managerial
economics
has
been
influenced
by
the
developments
in
management theory and accounting techniques. Accounting refers to the

recording of pecuniary transactions of the firm in certain books. A proper
knowledge of accounting techniques is very essential for the success of the
firm because profit maximization is the major objective of the firm.

10
kumaraswamireddy
Mighty mech
Managerial Economics requires a proper knowledge of cost and revenue

information and their classification. A student of managerial economics should
be familiar with the generation, interpretation and use of accounting data.
The focus of accounting within the firm is fast changing from the concepts of
store keeping to that if managerial decision making, this has resulted in a
new specialized area of study called Managerial Accounting.
3. Managerial Economics and mathematics:
The use of mathematics is significant for managerial economics in view of its
profit maximization goal long with optional use of resources. The major
problem of the firm is how to minimize cost, hoe to maximize profit or how to
optimize sales. Mathematical concepts and techniques are widely used in
economic logic to solve these problems. Also mathematical methods help to
estimate and predict the economic factors for decision making and forward
planning.
Mathematical symbols are more convenient to handle and understand various

concepts like incremental cost, elasticity of demand etc., Geometry, Algebra
and calculus are the major branches of mathematics which are of use in
managerial economics. The main concepts of mathematics like logarithms,
and exponentials, vectors and determinants, input-output models etc., are
widely used. Besides these usual tools, more advanced techniques designed
in the recent years viz. linear programming, inventory models and game
theory fine wide application in managerial economics.
4. Managerial Economics and Statistics:

Managerial Economics needs the tools of statistics in more than one way. A
successful businessman must correctly estimate the demand for his product.
He should be able to analyses the impact of variations in tastes. Fashion and
changes in income on demand only then he can adjust his output. Statistical
methods provide and sure base for decision-making. Thus statistical tools are
used in collecting data and analyzing them to help in the decision making
process.

11
kumaraswamireddy
Mighty mech
Statistical tools like the theory of probability and forecasting techniques help
the firm to predict the future course of events. Managerial Economics also
make use of correlation and multiple regressions in related variables like price
and demand to estimate the extent of dependence of one variable on the
other. The theory of probability is very useful in problems involving
uncertainty.
5. Managerial Economics and Operations Research:
Taking effectives decisions is the major concern of both managerial
economics and operations research. The development of techniques and
concepts such as linear programming, inventory models and game theory is
due to the development of this new subject of operations research in the
postwar years. Operations research is concerned with the complex problems
arising out of the management of men, machines, materials and money.
Operation research provides a scientific model of the system and it helps
managerial economists in the field of product development, material
management, and inventory control, quality control, marketing and demand
analysis. The varied tools of operations Research are helpful to managerial
economists in decision-making.
6. Managerial Economics and the theory of Decision- making:
The Theory of decision-making is a new field of knowledge grown in the
second half of this century. Most of the economic theories explain a single
goal for the consumer i.e., Profit maximization for the firm. But the theory of
decision-making is developed to explain multiplicity of goals and lot of
uncertainty.
As such this new branch of knowledge is useful to business firms, which have
to take quick decision in the case of multiple goals. Viewed this way the
theory of decision making is more practical and application oriented than the
economic theories.
7. Managerial Economics and Computer Science:

Computers have changes the way of the world functions and economic or
business activity is no exception. Computers are used in data and accounts
maintenance,
inventory
and
stock
controls
and

12
supply
and
demand
kumaraswamireddy
Mighty mech
predictions. What used to take days and months is done in a few minutes or
hours by the computers. In fact computerization of business activities on a
large scale has reduced the workload of managerial personnel. In most
countries a basic knowledge of computer science, is a compulsory programme
for managerial trainees.
To
conclude,
managerial
economics,
which
is
an
offshoot
traditional
economics, has gained strength to be a separate branch of knowledge. It

strength lies in its ability to integrate ideas from various specialized subjects
to gain a proper perspective for decision-making.
A successful managerial economist must be a mathematician, a statistician
and an economist. He must be also able to combine philosophic methods with
historical methods to get the right perspective only then; he will be good at
predictions. In short managerial practices with the help of other allied
sciences.
THE ROLE OF MANAGERIAL ECONOMIST
Making decisions and processing information are the two primary tasks of the
managers. Managerial economists have gained importance in recent years
with the emergence of an organizational culture in production and sales
activities.
A management economist with sound knowledge of theory and analytical
tools for information system occupies a prestigious place among the
personnel. A managerial economist is nearer to the policy-making. Equipped
with specialized skills and modern techniques he analyses the internal and
external operations of the firm. He evaluates and helps in decision making
regarding sales, Pricing financial issues, labour relations and profitability. He
helps in decision-making keeping in view the different goals of the firm.
His role in decision-making applies to routine affairs such as price fixation,
improvement in quality, Location of plant, expansion or contraction of output
etc. The role of managerial economist in internal management covers wide
areas of production, sales and inventory schedules of the firm.
The most important role of the managerial economist relates to demand
forecasting because an analysis of general business conditions is most vital
for the success of the firm. He prepares a short-term forecast of general
business activity and relates general economic forecasts to specific market
trends. Most firms require two forecasts one covering the short term (for nest
three months to one year) and the other covering the long term, which
13
kumaraswamireddy
Mighty mech
represents any period exceeding one-year. He has to be ever alert to gauge

the changes in tastes and preferences of the consumers. He should evaluate
the market potential. The need to know forecasting techniques on the part of
the managerial economics means, he should be adept at market research.
The purpose of market research is to provide a firm with information about
current market position as well as present and possible future trends in the
industry. A managerial economist who is well equipped with this knowledge
can help the firm to plan product improvement, new product policy, pricing,
and sales promotion strategy.
The fourth function of the managerial economist is to undertake an economic
analysis of the industry. This is concerned with project evaluation and
feasibility study at the firm level i.e., he should be able to judge on the basis
of cost benefit analysis, whether it is advisable and profitable to go ahead
with the project. The managerial economist should be adept at investment
appraisal methods. At the external level, economic analysis involves the
knowledge of competition involved, possibility of internal and foreign sales,
the general business climate etc.
Another function is security management analysis. This is very important in
the case of defense-oriented industries, power projects, and nuclear plants
where security is very essential. Security management means, also that the
production and trade secrets concerning technology, quality and other such
related facts should not be leaked out to others. This security is more
necessary in strategic and defense-oriented projects of national importance; a
managerial economist should be able to manage these issues of security
management analysis.
The sixth function is an advisory function. Here his advice is required on all
matters of production and trade. In the hierarchy of management, a
managerial economist ranks next to the top executives or the policy maker
who may be doyens of several projects. It is the managerial economist of
each firm who has to advise them on all matters of trade since they are in the
know of actual functioning of the unit in all aspects, both technical and
financial.
Another function of importance for the managerial economist is a concerned
with pricing and related problems. The success of the firm depends upon a
proper pricing strategy. The pricing decision is one of the most difficult
decisions to be made in business because the information required is never
fully available. Pricing of established products is different from new products.
He may have to operate in an atmosphere constrained by government
regulation. He may have to anticipate the reactions of competitors in pricing.
14
kumaraswamireddy
Mighty mech
The managerial economist has to be very alert and dynamic to take correct
pricing decision in changing environment.
Finally the specific function of a managerial economist includes an analysis of
environment issues. Modern theory of managerial economics recognizes the
social responsibility of the firm. It refers to the impact of a firm on
environmental factors. It should not have adverse impact on pollution and if
possible try to contribute to environmental preservation and protection in a
positive way.
The role of management economist lies not in taking decision but in
analyzing, concluding and recommending to the policy maker. He should have
the freedom to operate and analyze and must possess full knowledge of facts.
He has to collect and provide the quantitative data from within the firm. He
has to get information on external business environment such as general
market conditions, trade cycles, and behavior pattern of the consumers. The
managerial economist helps to co-ordinate policies relating to production,
investment, inventories and price.
He should have equanimity to meet crisis. He should act only after analysis
and discussion with relevant departments. He should have diplomacy to act in
advisory capacity to the top executive as well as getting co-operation from
different departments for his economic analysis. He should do well to have
intuitive ability to know what is good or bad for the firm.
He should have sound theoretical knowledge to take up the challenges he has
to face in actual day to day affairs. BANMOL referring to the role of
managerial economist points out. A managerial economist can become a for
more helpful member of a management group by virtue of studies of
economic analysis, primarily because there he learns to become an effective
model builder and because there he acquires a very rich body of tools and
techniques which can help to deal with the problems of the firm in a far more
rigorous, a far more probing and a far deeper manner.
QUESTIONS
1. What is managerial economics? Explain its focus are as
2. Point out the importance of managerial economics in decision making
3. What are the contributions and limitations of economic analysis in
business decision making
4. Managerial Economics is the discipline which deals with the applications
of economic theory to business management discuss.
5. Explain the fundamental concepts of managerial economics
6. Discuss the nature & Scope of Managerial economics
15
kumaraswamireddy
Mighty mech
7. Managerial Economics is the study of allocation of resources available

to a firm or other unit of management among the activities of that unit
explains.
8. Explain the nature of problems studies in managerial economics. What
is the importance of the study of such problems in business
management?
9. Explain the role and responsibilities of a managerial economics?
10. Managerial Economics is an integration of economic theory and with
business practice for the purpose of facilitating decision making and
forward planning explain.
QUIZ
1. Managerial Economics as a subject gained popularity first in______.
(
)
(a) India
(b) Germany (c) U.S.A (d) England
2. When the subject Managerial Economics gained popularity?
(
)
(a) 1950
(b) 1949
(c) 1951
(d) 1952
3. Which subject studies the behavior of the firm in theory and practice?
(
)
(a) Micro Economics
(b) Macro Economics
(c) Managerial Economics
(d) Welfare Economics
4. Which subject bridges gap between Economic Theory and Management
Practice?
(
)
(a) Welfare Economics
(b) Micro Economics
(d) Macro Economics
5. Application of Economics for managerial decision-making is called____.
(
)
(a) Macro Economics
(b) Welfare Economics
(d) Micro Economics
6. Which areas covered by the subject Managerial Economics.
(
)
(a) Operational issues
(b) Environmental issues
(c) Operational & Environmental issues
(d) None
7. The relationship between Managerial Economics and Economic Theory is
like that of Engineering Science to Physics (or) Medicine to ___________.
(
)
(a) Mathematics
(b) Economics
(c) Biology
(d) Accountancy
8. Making decisions and processing information are the two Primary tasks of
the Managers . It was explained by the subject _____________________.
(
)
(a) Physics
(b) Engineering Science
16
kumaraswamireddy
Mighty mech
(d) Chemistry
9. Managerial Economics is close to_________Economics

(
)
(a) National
(b) Business
(c) Micro
(d) Industrial
10. The theory of firm also called as_____________.
(
)
(a) Welfare Economics
(b) Industrial Economics
(c) Micro Economics
(d) None
11. Any activity aimed at earning or spending money is called ____activity.
(
)
(a) Service activity
(c) Economic activity
(b) Accounting activity

(d) None
Note: Answer is C for all the above questions.
---&&&&&---

17
kumaraswamireddy
Mighty mech
DEMAND ANALYSIS
Introduction & Meaning:
Demand in common parlance means the desire for an object. But in
economics demand is something more than this. According to Stonier and
Hague, Demand in economics means demand backed up by enough money
to pay for the goods demanded. This means that the demand becomes
effective only it if is backed by the purchasing power in addition to this there
must be willingness to buy a commodity.
Thus demand in economics means the desire backed by the willingness to buy
a commodity and the purchasing power to pay. In the words of Benham
The demand for anything at a given price is the amount of it which will be
bought per unit of time at that Price. (Thus demand is always at a price for a
definite quantity at a specified time.) Thus demand has three essentials
price, quantity demanded
and
time. Without
these, demand
has
to
significance in economics.
LAW of Demand:
Law of demand shows the relation between price and quantity demanded of a
commodity in the market. In the words of Marshall, the amount demand
increases with a fall in price and diminishes with a rise in price.
A rise in the price of a commodity is followed by a reduction in demand and a
fall in price is followed by an increase in demand, if a condition of demand
remains constant.
The law of demand may be explained with the help of the following demand
schedule.
Demand Schedule.
Price of Appel (In. Rs.)
Quantity Demanded
10

18
kumaraswamireddy
Mighty mech
When the price falls from Rs. 10 to 8 quantity demand increases from 1 to 2.
In the same way as price falls, quantity demand increases on the basis of the
demand
draw
schedule we can
the
demand curve.
Price
The demand curve DD shows the inverse relation between price and quantity
demand of apple. It is downward sloping.
Assumptions:
Law is demand is based on certain assumptions:
1. This is no change in consumers taste and preferences.
2. Income should remain constant.
3. Prices of other goods should not change.
4. There should be no substitute for the commodity
5. The commodity should not confer at any distinction
6. The demand for the commodity should be continuous
7. People should not expect any change in the price of the commodity
Exceptional demand curve:
Some times the demand curve slopes upwards from left to right. In this case
the
demand
curve
positive slope.
Price
19
has
kumaraswamireddy
Mighty mech
When price increases from OP to Op1 quantity demanded also increases from
to OQ1 and vice versa. The reasons for exceptional demand curve are as
follows.
1. Giffen paradox:
The Giffen good or inferior good is an exception to the law of demand. When
the price of an inferior good falls, the poor will buy less and vice versa. For
example, when the price of maize falls, the poor are willing to spend more on
superior goods than on maize if the price of maize increases, he has to
increase the quantity of money spent on it. Otherwise he will have to face
starvation. Thus a fall in price is followed by reduction in quantity demanded
and vice versa. Giffen first explained this and therefore it is called as
Giffens paradox.
2. Veblen or Demonstration effect:
Veblan has explained the exceptional demand curve through his doctrine of
conspicuous consumption. Rich people buy certain good because it gives
social distinction or prestige for example diamonds are bought by the richer
class for the prestige it possess. It the price of diamonds falls poor also will
buy is hence they will not give prestige. Therefore, rich people may stop
buying this commodity.
3. Ignorance:
Sometimes, the quality of the commodity is Judge by its price. Consumers
think that the product is superior if the price is high. As such they buy more
at a higher price.
4. Speculative effect:
If the price of the commodity is increasing the consumers will buy more of it
because of the fear that it increase still further, Thus, an increase in price
may not be accomplished by a decrease in demand.

20
kumaraswamireddy
Mighty mech
5. Fear of shortage:
During the times of emergency of war People may expect shortage of a
commodity. At that time, they may buy more at a higher price to keep stocks
for the future.
5. Necessaries:
In the case of necessaries like rice, vegetables etc. people buy more even at
a higher price.
Factors Affecting Demand:

There are factors on which the demand for a commodity depends. These
factors are economic, social as well as political factors. The effect of all the
factors on the amount demanded for the commodity is called Demand
Function.
These factors are as follows:
1. Price of the Commodity:
The most important factor-affecting amount demanded is the price of the
commodity. The amount of a commodity demanded at a particular price is
more properly called price demand. The relation between price and demand is
called the Law of Demand. It is not only the existing price but also the
expected changes in price, which affect demand.
2. Income of the Consumer:
The second most important factor influencing demand is consumer income. In
fact, we can establish a relation between the consumer income and the
demand at different levels of income, price and other things remaining the
same. The demand for a normal commodity goes up when income rises and
falls down when income falls. But in case of Giffen goods the relationship is
the opposite.
3. Prices of related goods:
The demand for a commodity is also affected by the changes in prices of the
related goods also. Related goods can be of two types:

21
kumaraswamireddy
Mighty mech
(i). Substitutes which can replace each other in use; for example, tea and
coffee
are
substitutes. The change in price of a substitute has effect on a

commoditys
demand
in the same direction in which price changes. The rise in price of

shall
coffee
raise
the demand for tea;

(ii). Complementary foods are those which are jointly demanded, such as pen
and
ink.
In
such cases complementary goods have opposite relationship between

price
of
one
commodity and the amount demanded for the other. If the price of pens
goes
up,
their demand is less as a result of which the demand for ink is also less.
The
price
and demand go in opposite direction. The effect of changes in price of a
commodity
on
amounts demanded of related commodities is called Cross Demand.
4. Tastes of the Consumers:

The amount demanded also depends on consumers taste. Tastes include
fashion, habit, customs, etc. A consumers taste is also affected by
advertisement. If the taste for a commodity goes up, its amount demanded is
more even at the same price. This is called increase in demand. The opposite
is called decrease in demand.
5. Wealth:
The amount demanded of commodity is also affected by the amount of wealth
as well as its distribution. The wealthier are the people; higher is the demand
for normal commodities. If wealth is more equally distributed, the demand for
necessaries and comforts is more. On the other hand, if some people are rich,
while the majorities are poor, the demand for luxuries is generally higher.
6. Population:

22
kumaraswamireddy
Mighty mech
Increase in population increases demand for necessaries of life. The

composition of population also affects demand. Composition of population
means the proportion of young and old and children as well as the ratio of
men to women. A change in composition of population has an effect on the
nature of demand for different commodities.
7. Government Policy:
Government policy affects the demands for commodities through taxation.
Taxing a commodity increases its price and the demand goes down. Similarly,
financial help from the government increases the demand for a commodity
while lowering its price.
8. Expectations regarding the future:
If consumers expect changes in price of commodity in future, they will change
the demand at present even when the present price remains the same.
Similarly, if consumers expect their incomes to rise in the near future they
may increase the demand for a commodity just now.
9. Climate and weather:
The climate of an area and the weather prevailing there has a decisive effect
on consumers demand. In cold areas woolen cloth is demanded. During hot
summer days, ice is very much in demand. On a rainy day, ice cream is not
so much demanded.
10. State of business:

The level of demand for different commodities also depends upon the
business conditions in the country. If the country is passing through boom
conditions, there will be a marked increase in demand. On the other hand,
the level of demand goes down during depression.

23
kumaraswamireddy
Mighty mech
UNIT - II
ELASTICITY OF DEMAND
Elasticity of demand explains the relationship between a change in price and
consequent change in amount demanded. Marshall introduced the concept
of elasticity of demand. Elasticity of demand shows the extent of change in
quantity demanded to a change in price.
In the words of Marshall, The elasticity of demand in a market is great or
small according as the amount demanded increases much or little for a given
fall in the price and diminishes much or little for a given rise in Price
Elastic demand: A small change in price may lead to a great change in
quantity demanded. In this case, demand is elastic.
24
kumaraswamireddy
Mighty mech
In-elastic demand: If a big change in price is followed by a small change in

demanded then the demand in inelastic.
Types of Elasticity of Demand:

There are three types of elasticity of demand:
1. Price elasticity of demand
2. Income elasticity of demand
3. Cross elasticity of demand
1. Price elasticity of demand:
Marshall was the first economist to define price elasticity of demand. Price
elasticity of demand measures changes in quantity demand to a change in
Price. It is the ratio of percentage change in quantity demanded to a
percentage change in price.
Proportionate
change
in
the
quantity
demand
of
commodity
Price elasticity =
------------------------------------------------------------
-----Proportionate change in the price of commodity

There are five cases of price elasticity of demand
A. Perfectly elastic demand:
When small change in price leads to an infinitely large change is quantity
demand, it is called perfectly or infinitely elastic demand. In this case E=

25
kumaraswamireddy
Mighty mech
The demand curve DD1 is horizontal straight line. It shows the at OP price
any amount is demand and if price increases, the consumer will not purchase
the commodity.
B. Perfectly Inelastic Demand
In this case, even a large change in price fails to bring about a change in
quantity demanded.
When price increases from OP to OP, the quantity demanded remains the
same. In other words the response of demand to a change in Price is nil. In
this case E=0.
C. Relatively elastic demand:

Demand changes more than proportionately to a change in price. i.e. a small
change in price loads to a very big change in the quantity demanded. In this
case
E > 1. This demand curve will be flatter.

26
kumaraswamireddy
Mighty mech
When price falls from OP to OP, amount demanded in crease from OQ to

OQ1 which is larger than the change in price.
D. Relatively in-elastic demand.
Quantity demanded changes less than proportional to a change in price. A
large change in price leads to small change in amount demanded. Here E < 1.
Demanded carve will be steeper.
When price falls from OP to OP1 amount demanded increases from OQ to

OQ1, which is smaller than the change in price.
E. Unit elasticity of demand:

The change in demand is exactly equal to the change in price. When both are
equal E=1 and elasticity if said to be unitary.

27
kumaraswamireddy
Mighty mech
When price falls from OP to OP1 quantity demanded increases from OP to

OP1, quantity demanded increases from OQ to OQ1. Thus a change in
price has resulted in an equal change in quantity demanded so price elasticity
of demand is equal to unity.
2. Income elasticity of demand:
Income elasticity of demand shows the change in quantity demanded as a
result of a change in income. Income elasticity of demand may be slated in
the form of a formula.
Proportionate change in the quantity demand of
commodity
Income Elasticity =
-----------------------------------------------------------
------Proportionate change in the income of the people

Income elasticity of demand can be classified in to five types.
A. Zero income elasticity:
Quantity demanded remains the same, even though money income increases.
Symbolically, it can be expressed as Ey=0. It can be depicted in the following
way:
As
income
from OY to OY1, quantity demanded never changes.
B. Negative Income elasticity:

28
increases
kumaraswamireddy
Mighty mech
When income increases, quantity demanded falls. In this case, income

elasticity of demand is negative. i.e., Ey < 0.
When income increases from OY to OY1, demand falls from OQ to OQ1.
c. Unit income elasticity:

When an increase in income brings about a proportionate increase in quantity
demanded, and then income elasticity of demand is equal to one. Ey = 1
When income increases from OY to OY1, Quantity demanded also increases

from OQ to OQ1.
d. Income elasticity greater than unity:
In this case, an increase in come brings about a more than proportionate
increase in quantity demanded. Symbolically it can be written as Ey > 1.
29
kumaraswamireddy
Mighty mech
It shows high-income elasticity of demand. When income increases from OY

to OY1, Quantity demanded increases from OQ to OQ1.
E. Income elasticity leas than unity:

When income increases quantity demanded also increases but less than
proportionately. In this case E < 1.
An increase in income from OY to OY, brings what an increase in quantity

demanded from OQ to OQ1, But the increase in quantity demanded is smaller
than the increase in income. Hence, income elasticity of demand is less than
one.
3. Cross elasticity of Demand:

30
kumaraswamireddy
Mighty mech
A change in the price of one commodity leads to a change in the quantity

demanded of another commodity. This is called a cross elasticity of demand.
The formula for cross elasticity of demand is:
Proportionate
change
in
the
quantity
demand
of
commodity X
Cross elasticity =
---------------------------------------------------------------
-------Proportionate change in the price of commodity Y

a. In case of substitutes, cross elasticity of demand is positive. Eg: Coffee
and Tea
When the price of coffee increases, Quantity demanded of tea increases. Both
are substitutes.
Price of Coffee
b. Incase of compliments, cross elasticity is negative. If increase in the

price of one commodity leads to a decrease in the quantity demanded of
another and vice versa.

31
kumaraswamireddy
Mighty mech
When price of car goes up from OP to OP!, the quantity demanded of petrol
decreases from OQ to OQ!. The cross-demanded curve has negative slope.
c. In case of unrelated commodities, cross elasticity of demanded is zero.
A change in the price of one commodity will not affect the quantity demanded
of another.
Quantity demanded of commodity b remains unchanged due to a change in

the price of A, as both are unrelated goods.
Factors influencing the elasticity of demand

Elasticity of demand depends on many factors.
1. Nature of commodity:
Elasticity or in-elasticity of demand depends on the nature of the commodity
i.e. whether a commodity is a necessity, comfort or luxury, normally; the
demand for Necessaries like salt, rice etc is inelastic. On the other band, the
demand for comforts and luxuries is elastic.
2. Availability of substitutes:
Elasticity of demand depends on availability or non-availability of substitutes.
In case of commodities, which have substitutes, demand is elastic, but in case
of commodities, which have no substitutes, demand is in elastic.

32
kumaraswamireddy
Mighty mech
3. Variety of uses:
If a commodity can be used for several purposes, than it will have elastic
demand. i.e. electricity. On the other hand, demanded is inelastic for
commodities, which can be put to only one use.
4. Postponement of demand:
If the consumption of a commodity can be postponed, than it will have elastic
demand. On the contrary, if the demand for a commodity cannot be
postpones, than demand is in elastic. The demand for rice or medicine cannot
be postponed, while the demand for Cycle or umbrella can be postponed.
5. Amount of money spent:
Elasticity of demand depends on the amount of money spent on the
commodity. If the consumer spends a smaller for example a consumer spends
a little amount on salt and matchboxes. Even when price of salt or matchbox
goes up, demanded will not fall. Therefore, demand is in case of clothing a
consumer spends a large proportion of his income and an increase in price will
reduce his demand for clothing. So the demand is elastic.
6. Time:
Elasticity of demand varies with time. Generally, demand is inelastic during
short period and elastic during the long period. Demand is inelastic during
short period because the consumers do not have enough time to know about
the change is price. Even if they are aware of the price change, they may not
immediately switch over to a new commodity, as they are accustomed to the
old commodity.
7. Range of Prices:
Range of prices exerts an important influence on elasticity of demand. At a
very high price, demand is inelastic because a slight fall in price will not
induce the people buy more. Similarly at a low price also demand is inelastic.
This is because at a low price all those who want to buy the commodity would
33
kumaraswamireddy
Mighty mech
have bought it and a further fall in price will not increase the demand.
Therefore, elasticity is low at very him and very low prices.
Importance of Elasticity of Demand:

The concept of elasticity of demand is of much practical importance.
1. Price fixation:
Each seller under monopoly and imperfect competition has to take into
account elasticity of demand while fixing the price for his product. If the
demand for the product is inelastic, he can fix a higher price.
2. Production:
Producers generally decide their production level on the basis of demand for
the product. Hence elasticity of demand helps the producers to take correct
decision regarding the level of cut put to be produced.
3. Distribution:
Elasticity of demand also helps in the determination of rewards for factors of
production. For example, if the demand for labour is inelastic, trade unions
will be successful in raising wages. It is applicable to other factors of
production.
4. International Trade:
Elasticity of demand helps in finding out the terms of trade between two
countries. Terms of trade refers to the rate at which domestic commodity is
exchanged for foreign commodities. Terms of trade depends upon the
elasticity of demand of the two countries for each other goods.
5. Public Finance:
Elasticity of demand helps the government in formulating tax policies. For
example, for imposing tax on a commodity, the Finance Minister has to take
into account the elasticity of demand.
34
kumaraswamireddy
Mighty mech
6. Nationalization:
The concept of elasticity of demand enables the government to decide about
nationalization of industries.
Demand Forecasting
Introduction:
The information about the future is essential for both new firms and those
planning to expand the scale of their production. Demand forecasting refers
to an estimate of future demand for the product.
It is an objective assessment of the future course of demand. In recent
times, forecasting plays an important role in business decision-making.
Demand forecasting has an important influence on production planning. It is
essential for a firm to produce the required quantities at the right time.
It is essential to distinguish between forecasts of demand and forecasts of
sales. Sales forecast is important for estimating revenue cash requirements
and expenses. Demand forecasts relate to production, inventory control,
timing, reliability of forecast etc. However, there is not much difference
between these two terms.
Types of demand Forecasting:
Based on the time span and planning requirements of business firms, demand
forecasting can be classified in to 1. Short-term demand forecasting and
2. Long term demand forecasting.
1. Short-term demand forecasting:
Short-term demand forecasting is limited to short periods, usually for one
year. It relates to policies regarding sales, purchase, price and finances. It
refers to existing production capacity of the firm. Short-term forecasting is
essential for formulating is essential for formulating a suitable price policy. If
the business people expect of rise in the prices of raw materials of shortages,
they may buy early. This price forecasting helps in sale policy formulation.
Production may be undertaken based on expected sales and not on actual
sales. Further, demand forecasting assists in financial forecasting also. Prior

35
kumaraswamireddy
Mighty mech
information about production and sales is essential to provide additional funds

on reasonable terms.
2. Long term forecasting:
In long-term forecasting, the businessmen should now about the long-term
demand for the product. Planning of a new plant or expansion of an existing
unit depends on long-term demand. Similarly a multi product firm must take
into account the demand for different items. When forecast are mode
covering long periods, the probability of error is high. It is vary difficult to
forecast the production, the trend of prices and the nature of competition.
Hence quality and competent forecasts are essential.
Prof. C. I. Savage and T.R. Small classify demand forecasting into time types.
They are 1. Economic forecasting, 2. Industry forecasting, 3. Firm level
forecasting. Economics forecasting is concerned with the economics, while
industrial level forecasting is used for inter-industry comparisons and is being
supplied by trade association or chamber of commerce. Firm level forecasting
relates to individual firm.
Methods of forecasting:
Several methods are employed for forecasting demand. All these methods can
be grouped under survey method and statistical method. Survey methods and
statistical methods are further subdivided in to different categories.
1. Survey Method:
Under this method, information about the desires of the consumer and
opinion of exports are collected by interviewing them. Survey method can be
divided into four types viz., Option survey method; expert opinion; Delphi
method and consumers interview methods.
a. Opinion survey method:
This method is also known as sales-force composite method (or) collective
opinion method. Under this method, the company asks its salesman to submit
estimate of future sales in their respective territories. Since the forecasts of
the salesmen are biased due to their optimistic or pessimistic attitude
ignorance
about
economic
developments
etc.
these
estimates
are
consolidated, reviewed and adjusted by the top executives. In case of wide

differences, an average is struck to make the forecasts realistic.
36
kumaraswamireddy
Mighty mech
This method is more useful and appropriate because the salesmen are more
knowledge. They can
be important
source of
information. They are
cooperative. The implementation within unbiased or their basic can be

corrected.
B. Expert opinion method:
Apart from salesmen and consumers, distributors or outside experts may also
e used for forecasting. In the United States of America, the automobile
companies get sales estimates directly from their dealers.
Firms in advanced
countries make use of outside experts for estimating future demand. Various
public and private agencies all periodic forecasts of short or long term
business conditions.
C. Delphi Method:
A variant of the survey method is Delphi method. It is a sophisticated method
to arrive at a consensus. Under this method, a panel is selected to give
suggestions to solve the problems in hand. Both internal and external experts
can be the members of the panel. Panel members one kept apart from each
other and express their views in an anonymous manner. There is also a
coordinator who acts as an intermediary among the panelists. He prepares
the questionnaire and sends it to the panelist. At the end of each round, he
prepares a summary report. On the basis of the summary report the panel
members have to give suggestions. This method has been used in the area of
technological forecasting. It has proved more popular in forecasting. It has
provided more popular in forecasting non-economic rather than economic
variables.
D. Consumers interview method:
In this method the consumers are contacted personally to know about their
plans and preference regarding the consumption of the product. A list of all
potential buyers would be drawn and each buyer will be approached and
asked how much he plans to buy the listed product in future. He would be
asked the proportion in which he intends to buy. This method seems to be the
most ideal method for forecasting demand.
2. Statistical Methods:

37
kumaraswamireddy
Mighty mech
Statistical method is used for long run forecasting. In this method, statistical
and mathematical techniques are used to forecast demand. This method
relies on post data.
a. Time series analysis or trend projection methods:
A well-established firm would have accumulated data. These data are
analyzed to determine the nature of existing trend. Then, this trend is
projected in to the future and the results are used as the basis for forecast.
This is called as time series analysis. This data can be presented either in a
tabular form or a graph. In the time series post data of sales are used to
forecast future.
b. Barometric Technique:
Simple trend projections are not capable of forecasting turning paints. Under
Barometric method, present events are used to predict the directions of
change in future. This is done with the help of economics and statistical
indicators. Those are (1) Construction Contracts awarded for building
materials (2) Personal income (3) Agricultural Income. (4) Employment (5)
Gross national income (6) Industrial Production (7) Bank Deposits etc.
c. Regression and correlation method:

Regression and correlation are used for forecasting demand. Based on post
data the future data trend is forecasted. If the functional relationship is
analyzed with the independent variable it is simple correction. When there are
several independent variables it is multiple correlation. In correlation we
analyze the nature of relation between the variables while in regression; the
extent of relation between the variables is analyzed. The results are
expressed in mathematical form. Therefore, it is called as econometric model
building. The main advantage of this method is that it provides the values of
the independent variables from within the model itself.
QUESTIONS
1. What is meant by elasticity of demand? How do you measure it? What
are determinates of elasticity of demand?
2. What is the utility of demand forecasting? What are the criteria for a
good forecasting method? Forecasting of demand for a new product?
Economic indicators
3. What is promotional elasticity of demand? How does if differ from cross
elasticity of demand.
38
kumaraswamireddy
Mighty mech
4. Explain in law of demand. What do you mean by shifts in demand

curve?
5. What is cross elasticity of demand? Is it positive for substitute or
complements? Show in a diagram relating to the demand for coffee to
the price of tea?
6. Income elasticity of demand and distinguish its, various tapes. How
does it differ from pure elasticity of demand?
7. What is meant by demand? Everyone desires a Maruti 800 Car Does
this mean that the demand for Maruti Car is large?
8. Calculate price elasticity of demand:
Q1= 4000
P1= 20
Q2= 5000
P2= 19
9. What is demand analysis? Explain the factor influencing the demand
for a product?
What are the various factors that influence the demand for a
computer.
QUIZ
1. Who explained the Law of Demand?
(
)
(a) Joel Dean
(b) Cobb-Douglas
(c) Marshall
(d) C.I.Savage & T.R.Small
2. Demand Curve always ________ sloping.
(
)
(a) Positive
(b) Straight line (c) Negative
(d) Vertical
3. Geffen goods, Veblan goods and speculations are exceptions to___.

(
)
(a) Cost function
(b) Production function
(c) Law of Demand
(d) Finance function
(
4. Who explained the Law of Demand?

)
(a) Cobb-Douglas
(b) Adam smith
(c) Marshall
(d) Joel Dean
5. When PE = (Price Elasticity of Demand is infinite), we call it ___.
(
)
(a) Relatively Elastic
(b) Perfectly Inelastic
(c) Perfectly Elastic
(d) Unit Elastic
6. Income Elasticity of demand when less than O (IE = < O), it is
termed as _______.
(
)
(a) Income Elasticity less than unity (b) Zero income Elasticity
(c) Negative Income Elasticity
(d) Unit Income Elasticity
7. The other name of inferior goods is _______.
(
)
(a) Veblan goods
(b) Necessaries
39
(c) Geffen goods
kumaraswamireddy
Mighty mech
(d) Diamonds
8. Estimation of future possible demand is called ______.

(
)
(a) Sales Forecasting
(b) Production Forecasting
(c) Income Forecasting
(d) Demand Forecasting
9. How many methods are employed to forecast the demand
(
)
(a) Three
(b) Four
(c) Two
(d) Five
10. What is the formula for Price Elasticity of Demand?
(
)
(b) % of change in the Demand
(a) % of change in the Price
% of change in the Demand
% of change in the Income
(d) % of change in the Demand of X
(c) % of change in the Demand
% of change in the Price
% of change in the Price of Y
11. When a small change in price leads great change in the quantity demand,
We call it ________.
(
)
(a) Inelastic Demand
(b) Negative Demand
(c) Elastic Demand
(d) None
12. When a great change in price leads small change in the quantity demand,
We call it ________.
(
)
(a) Elastic Demand
(b) Positive Demand
(c) Inelastic Demand
(d) None
13. Coffee and Tea are the ________ goods.
(
)
(a) Relative
(b) Complementary
(c) Substitute
(d) None
14. Consumers Survey method is one of the Survey Methods to forecast
the__.
(
)
(a) Sales
(b) Income
(c) Demand
(d) Production
15. What is the formula for Income Elasticity of Demand?
(
)
(a) % of change in the Income
% of change in the Demand
(d) % of change in the Demand of X
(c) % of change in the Demand
16. What is the formula for Cross Elasticity of Demand?
(
)
(a) % of change in the Price of X
% of change in the Demand of Y
(d) % of change in the Demand
(c) % of change in the Demand of X
40
kumaraswamireddy
Mighty mech
17. When PE = 0 (Price Elasticity of Demand is Zero), we call it ___.

(
)
(a) Relatively Elastic demand
(b) Perfectly Elastic demand
(c) Perfectly Inelastic demand
(d) Unit Elastic demand
18. When PE =>1 (Price Elasticity of Demand is greater than one),
We call it ___.
(
)
(a) Perfectly Elastic demand
(b) Perfectly inelastic demand
(c) Relatively Elastic demand
(d) relatively inelastic demand
19. When PE =<1 (Price Elasticity of Demand is less than one),
We call it ___.
(
)
(a) Perfectly inelastic demand
(b) Relatively Elastic demand
(c) Relatively inelastic demand
(d) perfectly Elastic demand
20. When PE =1 (Price Elasticity of Demand is one), we call it ___.
(
)
(a) Perfectly Elastic demand
(b) Perfectly inelastic demand
(c) Unit elastic demand
(d) Relatively Elastic demand
21. When Income Elasticity of demand is Zero (IE = 0), It is termed as ___.
(
)
(a) Negative Income Elasticity
(b) Unit Income Elasticity
(c) Zero Income Elasticity
(d) Infinite Income Elasticity
----&&&&&----

41
kumaraswamireddy
Mighty mech
UNIT - III
PRODUCTION FUNCTION
Introduction: The production function expresses a functional relationship
between physical inputs and physical outputs of a firm at any particular time
period. The output is thus a function of inputs. Mathematically production
function can be written as
Q= f (A, B, C, D)
Where Q stands for the quantity of output and A, B, C, D are various input
factors such as land, labour, capital and organization. Here output is the
function of inputs. Hence output becomes the dependent variable and inputs
are the independent variables.
The above function does not state by how much the output of Q changes as
a consequence of change of variable inputs. In order to express the
quantitative relationship between inputs and output, Production function has
been expressed in a precise mathematical equation i.e.
Y= a+b(x)
Which shows that there is a constant relationship between applications of
input (the only factor input X in this case) and the amount of output (y)
produced.
Importance:
1. When inputs are specified in physical units, production function helps
to estimate the level of production.
2. It becomes is equates when different combinations of inputs yield the
same level of output.
3. It indicates the manner in which the firm can substitute on input for
another without altering the total output.
4. When price is taken into consideration, the production function helps to
select the least combination of inputs for the desired output.
5. It considers two types input-output relationships namely law of
variable proportions and law of returns to scale. Law of variable
propositions explains the pattern of output in the short-run as the units
of variable inputs are increased to increase the output. On the other
hand law of returns to scale explains the pattern of output in the long
run as all the units of inputs are increased.
42
kumaraswamireddy
Mighty mech
6. The production function explains the maximum quantity of output,

which can be produced, from any chosen quantities of various inputs or
the minimum quantities of various inputs that are required to produce
a given quantity of output.
Production function can be fitted the particular firm or industry or for the
economy as whole. Production function will change with an improvement in
technology.
Assumptions:
Production function has the following assumptions.
1. The production function is related to a particular period of time.
2. There is no change in technology.
3. The producer is using the best techniques available.
4. The factors of production are divisible.
5. Production function can be fitted to a short run or to long run.
Cobb-Douglas production function:
Production function of the linear homogenous type is invested by Junt wicksell
and first tested by C. W. Cobb and P. H. Dougles in 1928. This famous
statistical production function is known as Cobb-Douglas production function.
Originally the function is applied on the empirical study of the American
manufacturing industry. Cabb Douglas production function takes the
following mathematical form.
Y= (AKX L1-x)
Where Y=output
K=Capital
L=Labour
A, =positive constant
Assumptions:
It has the following assumptions
1. The function assumes that output is the function of two factors viz.
capital and labour.
2. It is a linear homogenous production function of the first degree

43
kumaraswamireddy
Mighty mech
3. The function assumes that the logarithm of the total output of the
economy is a linear function of the logarithms of the labour force and
capital stock.
4. There are constant returns to scale
5. All inputs are homogenous
6. There is perfect competition
7. There is no change in technology
ISOQUANTS:
The term Isoquants is derived from the words iso and quant Iso means
equal and quent implies quantity. Isoquant therefore, means equal quantity.
A family of iso-product curves or isoquants or production difference curves
can represent a production function with two variable inputs, which are
substitutable for one another within limits.
Iqoquants are the curves, which represent the different combinations of

inputs producing a particular quantity of output. Any combination on the
isoquant represents the some level of output.
For a given output level firms production become,
Q= f (L, K)
Where Q, the units of output is a function of the quantity of two inputs L
and K.
Thus an isoquant shows all possible combinations of two inputs, which are
capable of producing equal or a given level of output. Since each combination
yields same output, the producer becomes indifferent towards these
combinations.
Assumptions:
1. There are only two factors of production, viz. labour and capital.
2. The two factors can substitute each other up to certain limit
3. The shape of the isoquant depends upon the extent of substitutability
of the two inputs.
4. The technology is given over a period.

44
kumaraswamireddy
Mighty mech
An isoquant may be explained with the help of an arithmetical example.

Combinations
Labour (units)
Capital (Units)
Output (quintals)
10
50
50
50
50
50
Combination A represent 1 unit of labour and 10 units of capital and

produces 50 quintals of a product all other combinations in the table are
assumed to yield the same given output of a product say 50 quintals by
employing any one of the alternative combinations of the two factors labour
and capital. If we plot all these combinations on a paper and join them, we
will get continues and smooth curve called Iso-product curve as shown below.
Labour is on the X-axis and capital is on the Y-axis. IQ is the ISO-Product

curve which shows all the alternative combinations A, B, C, D, E which can
produce 50 quintals of a product.
Producers Equilibrium:
The tem producers equilibrium is the counter part of consumers equilibrium.
Just as the consumer is in equilibrium when be secures maximum
satisfaction, in the same manner, the producer is in equilibrium when he

45
kumaraswamireddy
Mighty mech
secures maximum output, with the least cost combination of factors of

production.
The optimum position of the producer can be found with the help of isoproduct curve. The Iso-product curve or equal product curve or production
indifference curve shows different combinations of two factors of production,
which yield the same output. This is illustrated as follows.
Let us suppose. The producer can produces the given output of paddy say
100 quintals by employing any one of the following alternative combinations
of the two factors labour and capital computation of least cost combination of
two inputs.
L&LP
KXKP(4Rs.)
Units
Units
Output
(3Rs.)
cost of
Cost of
capital
Total cost
labour
10
45
100
30
180
210
20
28
100
60
112
172
30
16
100
90
64
154
40
12
100
120
48
168
50
100
150
32
182
It is clear from the above that 10 units of L combined with 45 units of K

would cost the producer Rs. 20/-. But if 17 units reduce K and 10 units
increase L, the resulting cost would be Rs. 172/-. Substituting 10 more units
of L for 12 units of K further reduces cost pf Rs. 154/-/ However, it will not
be profitable to continue this substitution process further at the existing
prices since the rate of substitution is diminishing rapidly. In the above table
the least cost combination is 30 units of L used with 16 units of K when the
cost would be minimum at Rs. 154/-. So this is they stage the producer is in
equilibrium.
LAW OF PRODUCTION:
Production analysis in economics theory considers two types of input-output
relationships.
1. When quantities of certain inputs, are fixed and others are variable and
46
kumaraswamireddy
Mighty mech
2. When all inputs are variable.

These two types of relationships have been explained in the form of laws.
i)
Law of variable proportions
ii)
Law of returns to scale
I. Law of variable proportions:

The law of variable proportions which is a new name given to old classical
concept of Law of diminishing returns has played a vital role in the modern
economics theory. Assume that a firms production function consists of fixed
quantities of all inputs (land, equipment, etc.) except labour which is a
variable input when the firm expands output by employing more and more
labour it alters the proportion between fixed and the variable inputs. The law
can be stated as follows:
When total output or production of a commodity is increased by adding units
of a variable input while the quantities of other inputs are held constant, the
increase in total production becomes after some point, smaller and smaller.
If equal increments of one input are added, the inputs of other production
services being held constant, beyond a certain point the resulting increments
of product will decrease i.e. the marginal product will diminish. (G. Stigler)
As the proportion of one factor in a combination of factors is increased, after
a point, first the marginal and then the average product of that factor will
diminish. (F. Benham)
The law of variable proportions refers to the behaviour of output as the
quantity of one Factor is increased Keeping the quantity of other factors fixed
and further it states that the marginal product and average product will
eventually do cline. This law states three types of productivity an input factor
Total, average and marginal physical productivity.
Assumptions of the Law: The law is based upon the following assumptions:
i)
The state of technology remains constant. If there is any

improvement in technology, the average and marginal out put will
not decrease but increase.
ii)
Only one factor of input is made variable and other factors are kept
constant. This law does not apply to those cases where the factors
must be used in rigidly fixed proportions.

47
iii)
kumaraswamireddy
Mighty mech
All units of the variable factors are homogenous.
Three stages of law:

The behaviors of the Output when the varying quantity of one factor is
combines with a fixed quantity of the other can be divided in to three district
stages. The three stages can be better understood by following the table.
Fixed factor
Variable factor
Total product
(Labour)
Average
Marginal
Product
Product
100
100
Stage
220
120
120
270
90
50
300
75
30
Stage
320
64
20
II
330
55
10
330
47
320
40
-10
Stage
III
Above table reveals that both average product and marginal product increase
in the beginning and then decline of the two marginal products drops of faster
than average product. Total product is maximum when the farmer employs
6th worker, nothing is produced by the 7th worker and its marginal
productivity is zero, whereas marginal product of 8th worker is -10, by just
creating credits 8th worker not only fails to make a positive contribution but
leads to a fall in the total output.
Production function with one variable input and the remaining fixed inputs is
illustrated as below

48
kumaraswamireddy
Mighty mech
From the above graph the law of variable proportions operates in three
stages. In the first stage, total product increases at an increasing rate. The
marginal product in this stage increases at an increasing rate resulting in a
greater increase in total product. The average product also increases. This
stage continues up to the point where average product is equal to marginal
product. The law of increasing returns is in operation at this stage. The law of
diminishing returns starts operating from the second stage awards. At the
second stage total product increases only at a diminishing rate. The average
product also declines. The second stage comes to an end where total product
becomes maximum and marginal product becomes zero. The marginal
product becomes negative in the third stage. So the total product also
declines. The average product continues to decline.
We can sum up the above relationship thus when A.P. is rising, M. P. rises
more than A. P; When A. P. is maximum and constant, M. P. becomes
equal to A. P. when A. P. starts falling, M. P. falls faster than A. P..
Thus, the total product, marginal product and average product pass through
three phases, viz., increasing diminishing and negative returns stage. The law
of variable proportion is nothing but the combination of the law of increasing
and demising returns.
II. Law of Returns of Scale:

The law of returns to scale explains the behavior of the total output in
response to change in the scale of the firm, i.e., in response to a
simultaneous to changes in the scale of the firm, i.e., in response to a
simultaneous and proportional increase in all the inputs. More precisely, the
Law of returns to scale explains how a simultaneous and proportionate
increase in all the inputs affects the total output at its various levels.
The concept of variable proportions is a short-run phenomenon as in these
period fixed factors can not be changed and all factors cannot be changed. On
the other hand in the long-term all factors can be changed as made variable.
When we study the changes in output when all factors or inputs are changed,
we study returns to scale. An increase in the scale means that all inputs or
factors are increased in the same proportion. In variable proportions, the
49
kumaraswamireddy
Mighty mech
cooperating factors may be increased or decreased and one faster (Ex. Land
in agriculture (or) machinery in industry) remains constant so that the
changes in proportion among the factors result in certain changes in output.
In returns to scale all the necessary factors or production are increased or
decreased to the same extent so that whatever the scale of production, the
proportion among the factors remains the same.
When a firm expands, its scale increases all its inputs proportionally, then
technically there are three possibilities. (i) The total output may increase
proportionately (ii) The total output may increase more than proportionately
and (iii) The total output may increase less than proportionately. If increase
in the total output is proportional to the increase in input, it means constant
returns to scale.
If increase in the output is greater than the proportional
increase in the inputs, it means increasing return to scale. If increase in the

output is less than proportional
increase in the inputs, it means diminishing
returns to scale.
Let us now explain the laws of returns to scale with the help of isoquants for a
two-input and single output production system.
ECONOMIES OF SCALE
Production may be carried on a small scale or o a large scale by a firm. When
a firm expands its size of production by increasing all the factors, it secures
certain advantages known as economies of production. Marshall has classified
these economies of large-scale production into internal economies and
external economies.
Internal economies are those, which are opened to a single factory or a single
firm independently of the action of other firms. They result from an increase
in the scale of output of a firm and cannot be achieved unless output
increases. Hence internal economies depend solely upon the size of the firm
and are different for different firms.
External economies are those benefits, which are shared in by a number of
firms or industries when the scale of production in an industry or groups of
industries increases. Hence external economies benefit all firms within the
industry as the size of the industry expands.
Causes of internal economies:
Internal economies are generally caused by two factors
1. Indivisibilities
2. Specialization.

50
kumaraswamireddy
Mighty mech
1. Indivisibilities
Many fixed factors of production are indivisible in the sense that they must be
used in a fixed minimum size. For instance, if a worker works half the time,
he may be paid half the salary. But he cannot be chopped into half and asked
to produce half the current output. Thus as output increases the indivisible
factors which were being used below capacity can be utilized to their full
capacity thereby reducing costs. Such indivisibilities arise in the case of
labour, machines, marketing, finance and research.
2. Specialization.
Division of labour, which leads to specialization, is another cause of internal

economies. Specialization refers to the limitation of activities within a
particular field of production. Specialization may be in labour, capital,
machinery and place. For example, the production process may be split into
four departments relation to manufacturing, assembling, packing and
marketing under the charge of separate managers who may work under the
overall charge of the general manger and coordinate the activities of the for
departments. Thus specialization will lead to greater productive efficiency and
to reduction in costs.
Internal Economies:
Internal economies may be of the following types.
A). Technical Economies.
Technical economies arise to a firm from the use of better machines and
superior techniques of production. As a result, production increases and per
unit cost of production falls. A large firm, which employs costly and superior
plant and equipment, enjoys a technical superiority over a small firm. Another
technical economy lies in the mechanical advantage of using large machines.
The cost of operating large machines is less than that of operating mall
machine. More over a larger firm is able to reduce its per unit cost of
production
by
linking
the
various
processes
of
production.
Technical
economies may also be associated when the large firm is able to utilize all its
waste materials for the development of by-products industry. Scope for
specialization is also available in a large firm. This increases the productive
capacity of the firm and reduces the unit cost of production.
B). Managerial Economies:

51
kumaraswamireddy
Mighty mech
These economies arise due to better and more elaborate management, which
only the large size firms can afford. There may be a separate head for
manufacturing, assembling, packing, marketing, general administration etc.
Each department is under the charge of an expert. Hence the appointment of
experts, division of administration into several departments, functional
specialization and
scientific
co-ordination of
various
works make the
management of the firm most efficient.

C). Marketing Economies:
The large firm reaps marketing or commercial economies in buying its
requirements and in selling its final products. The large firm generally has a
separate marketing department. It can buy and sell on behalf of the firm,
when the market trends are more favorable. In the matter of buying they
could enjoy advantages like preferential treatment, transport concessions,
cheap credit, prompt delivery and fine relation with dealers. Similarly it sells
its products more effectively for a higher margin of profit.
D). Financial Economies:
The large firm is able to secure the necessary finances either for block capital
purposes or for working capital needs more easily and cheaply. It can barrow
from the public, banks and other financial institutions at relatively cheaper
rates. It is in this way that a large firm reaps financial economies.
E). Risk bearing Economies:
The large firm produces many commodities and serves wider areas. It is,
therefore, able to absorb any shock for its existence. For example, during
business depression, the prices fall for every firm. There is also a possibility
for market fluctuations in a particular product of the firm. Under such
circumstances the risk-bearing economies or survival economies help the
bigger firm to survive business crisis.
F). Economies of Research:
A large firm possesses larger resources and can establish its own research
laboratory and employ trained research workers. The firm may even invent
new production techniques for increasing its output and reducing cost.
G). Economies of welfare:

52
kumaraswamireddy
Mighty mech
A large firm can provide better working conditions in-and out-side the factory.
Facilities like subsidized canteens, crches for the infants, recreation room,
cheap houses, educational and medical facilities tend to increase the
productive efficiency of the workers, which helps in raising production and
reducing costs.
External Economies.
Business firm enjoys a number of external economies, which are discussed
below:
A). Economies of Concentration:
When an industry is concentrated in a particular area, all the member firms
reap some common economies like skilled labour, improved means of
transport and communications, banking and financial services, supply of
power and benefits from subsidiaries. All these facilities tend to lower the unit
cost of production of all the firms in the industry.
B). Economies of Information
The industry can set up an information centre which may publish a journal
and pass on information regarding the availability of raw materials, modern
machines, export potentialities and provide other information needed by the
firms. It will benefit all firms and reduction in their costs.
C). Economies of Welfare:
An industry is in a better position to provide welfare facilities to the workers.
It may get land at concessional rates and procure special facilities from the
local bodies for setting up housing colonies for the workers. It may also
establish public health care units, educational institutions both general and
technical so that a continuous supply of skilled labour is available to the
industry. This will help the efficiency of the workers.
D). Economies of Disintegration:
The firms in an industry may also reap the economies of specialization. When
an industry expands, it becomes possible to spilt up some of the processes
which are taken over by specialist firms. For example, in the cotton textile
industry, some firms may specialize in manufacturing thread, others in
printing, still others in dyeing, some in long cloth, some in dhotis, some in

53
kumaraswamireddy
Mighty mech
shirting etc. As a result the efficiency of the firms specializing in different

fields increases and the unit cost of production falls.
Thus internal economies depend upon the size of the firm and external
economies depend upon the size of the industry.
DISECONOMIES OF LARGE SCALE PRODUCTION

Internal and external diseconomies are the limits to large-scale production. It
is possible that expansion of a firms output may lead to rise in costs and thus
result diseconomies instead of economies. When a firm expands beyond
proper limits, it is beyond the capacity of the manager to manage it
efficiently. This is an example of an internal diseconomy. In the same
manner, the expansion of an industry may result in diseconomies, which may
be called external diseconomies. Employment of additional factors of
production becomes less efficient and they are obtained at a higher cost. It is
in this way that external diseconomies result as an industry expands.
The major diseconomies of large-scale production are discussed below:
Internal Diseconomies:
A). Financial Diseconomies:
For expanding business, the entrepreneur needs finance. But finance may not
be easily available in the required amount at the appropriate time. Lack of
finance retards the production plans thereby increasing costs of the firm.
B). Managerial diseconomies:
There are difficulties of large-scale management. Supervision becomes a
difficult job. Workers do not work efficiently, wastages arise, decision-making
becomes difficult, coordination between workers and management disappears
and production costs increase.
C). Marketing Diseconomies:
As business is expanded, prices of the factors of production will rise. The cost
will therefore rise. Raw materials may not be available in sufficient quantities
due to their scarcities. Additional output may depress the price in the market.

54
kumaraswamireddy
Mighty mech
The demand for the products may fall as a result of changes in tastes and
preferences of the people. Hence cost will exceed the revenue.
D). Technical Diseconomies:

There is a limit to the division of labour and splitting down of production
p0rocesses. The firm may fail to operate its plant to its maximum capacity. As
a result cost per unit increases. Internal diseconomies follow.
E). Diseconomies of Risk-taking:
As the scale of production of a firm expands risks also increase with it. Wrong
decision by the management may adversely affect production. In large firms
are affected by any disaster, natural or human, the economy will be put to
strains.
External Diseconomies:
When many firm get located at a particular place, the costs of transportation
increases due to congestion. The firms have to face considerable delays in
getting raw materials and sending finished products to the marketing centers.
The localization of industries may lead to scarcity of raw material, shortage of
various factors of production like labour and capital, shortage of power,
finance and equipments. All such external diseconomies tend to raise cost per
unit.
QUESTIONS
1. Why does the law of diminishing returns operate? Explain with the help
of a diagram.
2. Explain the nature and uses of production function.
3. Explain and illustrate lows of returns to scale.
4. a. Explain how production function can be mode use of to reduce cost
of
Production.
b. Explain low of constant returns? Illustrate.
5. Explain the following (i) Internal Economics (ii) External Economics
(or)
Explain Economics of scale. Explain the factor, which causes increasing
returns to scale.
6. Explain the following with reference to production functions
(a) MRTS
55
kumaraswamireddy
Mighty mech
(b) Variable proportion of factor

7. Define production function, explain is equate and is cost curves.
8. Explain the importance and uses of production function in break-even
analysis.
9. Discuss the equilibrium of a firm with isoquants.
10. (a) What are isocost curves and iso quants? Do they interest each
other
(b) Explain Cobb-Douglas Production function.
QUIZ
1. How many types of input-output relations discussed by the
Law of production.
(
)
(a) Five
(b) Four
(c) Two
(d) Three
2. How many stages are there in Law of Variable Proportions?
(
)
(a) Five
(b) Two
(c) Three
(d) Four
3. Congregation of body of persons assembling together to work at a certain
Time and place is called as
(
)
(a) Firm
(b) Industry
(c) Plant
(d) Size
4. When a firm expands its Size of production by increasing all factors,
It secures certain advantages, known as
(
)
(a) Optimum Size
(b) Diseconomies of Scale
(c) Economies of Scale
(d) None
5. When producer secures maximum output with the least cost combination
Of factors of production, it is known as_______
(
)
(a) Consumers Equilibrium
(b) Price Equilibrium
(c) Producers Equilibrium
(d) Firms Equilibrium
6. The Law of Variable Proportions is also called as ____________.
(
)
(a) Law of fixed proportions
(b) Law of returns to scale
(c) Law of variable proportions (d) None
7. _________ Is a group of firms producing the same are slightly
Different products for the same market or using same raw material.
(
)
(a) Plant
(b) Firm
(c) Industry
(d) Size
56
kumaraswamireddy
8. When proportionate increase in all

Proportionate increase in output,
(
)
(a) Increasing Returns to Scale
(c) Constant Returns to Scale
inputs results in an equal

then we call____________.
(b) Decreasing Returns to Scale
(d) None
9. When different combinations of inputs yield the same level of output

Known as ___________.
(
)
(a) Different Quants
(b) Output differentiation
(c) Isoquants
(d) Production differentiation
10. Conversion of inputs in to output is called as _________________.
(
)
(a) Sales
(b) Income
(c) Production
(d) Expenditure
11. When Proportionate increase in all inputs results in more than equal
Proportionate increase in output, then we call _____________.
(
)
(a) Decreasing Returns to Scale (b) Constant Returns to Scale
(c) Increasing Returns to Scale
(d) None
12. When Proportionate increase in all inputs results in less than Equal
Proportionate increase in output, then we call _____________.
(
)
(a) Increasing Returns to Scale
(b) Constant Returns to Scale
(c) Decreasing Returns to Scale
(d) None
13. A curve showing equal amount of outlay with varying Proportions of
Two inputs are called ________________.
(
)
(a) Total Cost Curve
(b) Variable Cost Curve
(c) Isocost Curve
(d) Marginal Cost Curve

57
Mighty mech
kumaraswamireddy
Mighty mech
COST ANALYSIS
Profit is the ultimate aim of any business and the long-run prosperity of a firm
depends upon its ability to earn sustained profits. Profits are the difference
between selling price and cost of production. In general the selling price is not
within the control of a firm but many costs are under its control. The firm
should therefore aim at controlling and minimizing cost. Since every business
decision involves cost consideration, it is necessary to understand the
meaning of various concepts for clear business thinking and application of
right kind of costs.
COST CONCEPTS:
A managerial economist must have a clear understanding of the different
cost concepts for clear business thinking and proper application. The several
alternative bases of classifying cost and the relevance of each for different
kinds of problems are to be studied. The various relevant concepts of cost
are:
1. Opportunity costs and outlay costs:
Out lay cost also known as actual costs obsolete costs are those expends
which are actually incurred by the firm these are the payments made for
labour, material, plant, building, machinery traveling, transporting etc., These
are all those expense item appearing in the books of account, hence based on
accounting cost concept.
On the other hand opportunity cost implies the earnings foregone on the next
best alternative, has the present option is undertaken. This cost is often
measured by assessing the alternative, which has to be scarified if the
particular line is followed.
The opportunity cost concept is made use for long-run decisions. This concept
is very important in capital expenditure budgeting. This concept is very
important in capital expenditure budgeting. The concept is also useful for
taking short-run decisions opportunity cost is the cost concept to use when
the supply of inputs is strictly limited and when there is an alternative. If
there is no alternative, Opportunity cost is zero. The opportunity cost of any
action is therefore measured by the value of the most favorable alternative
course, which had to be foregoing if that action is taken.
2. Explicit and implicit costs:

58
kumaraswamireddy
Mighty mech
Explicit costs are those expenses that involve cash payments. These are the
actual or business costs that appear in the books of accounts. These costs
include payment of wages and salaries, payment for raw-materials, interest
on borrowed capital funds, rent on hired land, Taxes paid etc.
Implicit costs are the costs of the factor units that are owned by the employer
himself. These costs are not actually incurred but would have been incurred in
the absence of employment of self owned factors. The two normal implicit
costs are depreciation, interest on capital etc. A decision maker must consider
implicit costs too to find out appropriate profitability of alternatives.
3. Historical and Replacement costs:
Historical cost is the original cost of an asset. Historical cost valuation shows
the cost of an asset as the original price paid for the asset acquired in the
past. Historical valuation is the basis for financial accounts.
A replacement cost is the price that would have to be paid currently to
replace the same asset. During periods of substantial change in the price
level, historical valuation gives a poor projection of the future cost intended
for managerial decision. A replacement cost is a relevant cost concept when
financial statements have to be adjusted for inflation.
4. Short run and long run costs:
Short-run is a period during which the physical capacity of the firm remains
fixed. Any increase in output during this period is possible only by using the
existing physical capacity more extensively. So short run cost is that which
varies with output when the plant and capital equipment in constant.
Long run costs are those, which vary with output when all inputs are variable
including plant and capital equipment. Long-run cost analysis helps to take
investment decisions.
5. Out-of pocket and books costs:
Out-of pocket costs also known as explicit costs are those costs that involve
current cash payment. Book costs also called implicit costs do not require
current cash payments. Depreciation, unpaid interest, salary of the owner is
examples of back costs.
But the book costs are taken into account in determining the level dividend
payable during a period. Both book costs and out-of-pocket costs are
59
kumaraswamireddy
Mighty mech
considered for all decisions. Book cost is the cost of self-owned factors of
production.
6. Fixed and variable costs:
Fixed cost is that cost which remains constant for a certain level to output. It
is not affected by the changes in the volume of production. But fixed cost per
unit decrease, when the production is increased. Fixed cost includes salaries,
Rent, Administrative expenses depreciations etc.
Variable is that which varies directly with the variation is output. An increase
in total output results in an increase in total variable costs and decrease in
total output results in a proportionate decline in the total variables costs. The
variable cost per unit will be constant. Ex: Raw materials, labour, direct
expenses, etc.
7. Post and Future costs:
Post costs also called historical costs are the actual cost incurred and
recorded in the book of account these costs are useful only for valuation and
not for decision making.
Future costs are costs that are expected to be incurred in the futures. They
are not actual costs. They are the costs forecasted or estimated with rational
methods. Future cost estimate is useful for decision making because decision
are meant for future.
8. Traceable and common costs:
Traceable costs otherwise called direct cost, is one, which can be identified
with a products process or product. Raw material, labour involved in
production is examples of traceable cost.
Common costs are the ones that common are attributed to a particular
process or product. They are incurred collectively for different processes or
different types of products. It cannot be directly identified with any particular
process or type of product.
9. Avoidable and unavoidable costs:
Avoidable costs are the costs, which can be reduced if the business activities
of a concern are curtailed. For example, if some workers can be retrenched

60
kumaraswamireddy
Mighty mech
with a drop in a product line, or volume or production the wages of the

retrenched workers are escapable costs.
The unavoidable costs are otherwise called sunk costs. There will not be any
reduction in this cost even if reduction in business activity is made. For
example cost of the ideal machine capacity is unavoidable cost.
10. Controllable and uncontrollable costs:
Controllable costs are ones, which can be regulated by the executive who is in
change of it. The concept of controllability of cost varies with levels of
management. Direct expenses like material, labour etc. are controllable costs.
Some costs are not directly identifiable with a process of product. They are
appointed to various processes or products in some proportion. This cost
varies with the variation in the basis of allocation and is independent of the
actions of the executive of that department. These apportioned costs are
called uncontrollable costs.
11. Incremental and sunk costs:
Incremental cost also known as different cost is the additional cost due to a
change in the level or nature of business activity. The change may be caused
by adding a new product, adding new machinery, replacing a machine by a
better one etc.
Sunk costs are those which are not altered by any change They are the
costs incurred in the past. This cost is the result of past decision, and cannot
be changed by future decisions. Investments in fixed assets are examples of
sunk costs.
12. Total, average and marginal costs:
Total cost is the total cash payment made for the input needed for
production. It may be explicit or implicit. It is the sum total of the fixed and
variable costs. Average cost is the cost per unit of output. If is obtained by
dividing the total cost (TC) by the total quantity produced (Q)
TC
Average cost = -----Q
Marginal cost is the additional cost incurred to produce and additional unit of
output or it is the cost of the marginal unit produced.

61
kumaraswamireddy
Mighty mech
13. Accounting and Economics costs:

Accounting costs are the costs recorded for the purpose of preparing the
balance sheet and profit and ton statements to meet the legal, financial and
tax purpose of the company. The accounting concept is a historical concept
and records what has happened in the post.
Economics concept considers future costs and future revenues, which help
future planning, and choice, while the accountant describes what has
happened, the economics aims at projecting what will happen.
COST-OUTPUT RELATIONSHIP
A proper understanding of the nature and behavior of costs is a must for
regulation and control of cost of production. The cost of production depends
on money forces and an understanding of the functional relationship of cost to
various forces will help us to take various decisions. Output is an important
factor, which influences the cost.
The cost-output relationship plays an important role in determining the
optimum level of production. Knowledge of the cost-output relation helps the
manager in cost control, profit prediction, pricing, promotion etc. The relation
between cost and its determinants is technically described as the cost
function.
C= f (S, O, P, T .)
Where;
C= Cost (Unit or total cost)
S= Size of plant/scale of production
O= Output level
P= Prices of inputs
T= Technology
Considering the period the cost function can be classified as (a) short-run cost
function and (b) long-run cost function. In economics theory, the short-run is
defined as that period during which the physical capacity of the firm is fixed
and the output can be increased only by using the existing capacity allows to
bring changes in output by physical capacity of the firm.
(a) Cost-Output Relation in the short-run:

62
kumaraswamireddy
Mighty mech
The cost concepts made use of in the cost behavior are total cost, Average
cost, and marginal cost.
Total cost is the actual money spent to produce a particular quantity of
output. Total cost is the summation of fixed and variable costs.
TC=TFC+TVC
Up to a certain level of production total fixed cost i.e., the cost of plant,
building, equipment etc, remains fixed. But the total variable cost i.e., the
cost of labour, raw materials etc., Vary with the variation in output. Average
cost is the total cost per unit. It can be found out as follows.
TC
Q
Q
The total of average fixed cost (TFC/Q) keep coming down as the production
is increased and average variable cost (TVC/Q) will remain constant at any
level of output.
AC=
Marginal cost is the addition to the total cost due to the production of an
additional unit of product. It can be arrived at by dividing the change in total
cost by the change in total output.
In the short-run there will not be any change in total fixed cost. Hence
change in total cost implies change in total variable cost only.
Cost output relations
Units of
Total
Total
Total
Average
Average
Average
Marginal
Output
fixed
variable
cost
variable
fixed
cost
cost
cost
cost
(TFC +
cost
cost
(TC/Q)
MC
TFC
TVC
TVC)
(TVC /
(TFC /
AC
TC
Q) AVC
Q) AFC
60
60
20
80
20
60
80
20
60
36
96
18
30
48
16
60
48
108
16
20
36
12
60
64
124
16
15
31
16
60
90
150
18
12
30
26
60
132
192
22
10
32
42

63
kumaraswamireddy
Mighty mech
The above table represents the cost-output relation. The table is prepared on
the basis of the law of diminishing marginal returns. The fixed cost Rs. 60
May include rent of factory building, interest on capital, salaries of
permanently employed staff, insurance etc. The table shows that fixed cost is
same at all levels of output but the average fixed cost, i.e., the fixed cost per
unit, falls continuously as the output increases. The expenditure on the
variable factors (TVC) is at different rate. If more and more units are
produced with a given physical capacity the AVC will fall initially, as per the
table declining up to 3rd unit, and being constant up to 4th unit and then
rising. It implies that variable factors produce more efficiently near a firms
optimum capacity than at any other levels of output.
And later rises. But the rise in AC is felt only after the start rising. In the table
AVC starts rising from the 5th unit onwards whereas the AC starts rising
from the 6th unit only so long as AVC declines AC also will decline. AFC
continues to fall with an increase in Output. When the rise in AVC is more
than the decline in AFC, the total cost again begin to rise. Thus there will be
a stage where the AVC, the total cost again begin to rise thus there will be a
stage where the AVC may have started rising, yet the AC is still declining
because the rise in AVC is less than the droop in AFC.
Thus the table shows an increasing returns or diminishing cost in the first
stage and diminishing returns or diminishing cost in the second stage and
followed by diminishing returns or increasing cost in the third stage.
The short-run cost-output relationship can be shown graphically as follows.

64
kumaraswamireddy
Mighty mech
In the above graph the AFC curve continues to fall as output rises an
account of its spread over more and more units Output. But AVC curve (i.e.
variable cost per unit) first falls and than rises due to the operation of the law
of variable proportions. The behavior of ATC curve depends upon the
behavior of AVC curve and AFC curve. In the initial stage of production both
AVC and AFC decline and hence ATC also decline. But after a certain point
AVC starts rising. If the rise in variable cost is less than the decline in fixed
cost, ATC will still continue to decline otherwise AC begins to rise. Thus the
lower end of ATC curve thus turns up and gives it a U-shape. That is why
ATC curve are U-shaped. The lowest point in ATC curve indicates the leastcost combination of inputs. Where the total average cost is the minimum and
where the MC curve intersects AC curve, It is not be the maximum output
level rather it is the point where per unit cost of production will be at its
lowest.
The relationship between AVC, AFC and ATC can be summarized up as
follows:
1. If both AFC and AVC fall, ATC will also fall.
2. When AFC falls and AVC rises
a. ATC will fall where the drop in AFC is more than the raise in
AVC.
b. ATC remains constant is the drop in AFC = rise in AVC
c. ATC will rise where the drop in AFC is less than the rise in
AVC
b. Cost-output Relationship in the long-run:
Long run is a period, during which all inputs are variable including the one,
which are fixes in the short-run. In the long run a firm can change its output
according to its demand. Over a long period, the size of the plant can be
changed, unwanted buildings can be sold staff can be increased or reduced.
The long run enables the firms to expand and scale of their operation by
bringing or purchasing larger quantities of all the inputs. Thus in the long run
all factors become variable.
The long-run cost-output relations therefore imply the relationship between
the total cost and the total output. In the long-run cost-output relationship is
influenced by the law of returns to scale.
In the long run a firm has a number of alternatives in regards to the scale of
operations. For each scale of production or plant size, the firm has an
appropriate short-run average cost curves. The short-run average cost (SAC)

65
kumaraswamireddy
Mighty mech
curve applies to only one plant whereas the long-run average cost (LAC)
curve takes in to consideration many plants.
The long-run cost-output relationship is shown graphically with the help of
LCA curve.
To draw on LAC curve we have to start with a number of SAC curves. In the
above figure it is assumed that technologically there are only three sizes of
plants small, medium and large, SAC, for the small size, SAC2 for the
medium size plant and SAC3 for the large size plant. If the firm wants to
produce OP units of output, it will choose the smallest plant. For an output
beyond OQ the firm wills optimum for medium size plant. It does not mean
that the OQ production is not possible with small plant. Rather it implies that
cost of production will be more with small plant compared to the medium
plant.
For an output OR the firm will choose the largest plant as the cost of
production will be more with medium plant. Thus the firm has a series of
SAC curves. The LCA curve drawn will be tangential to the entire family of
SAC curves i.e. the LAC curve touches each SAC curve at one point, and
thus it is known as envelope curve. It is also known as planning curve as it
serves as guide to the entrepreneur in his planning to expand the production
in future. With the help of LAC the firm determines the size of plant which
yields the lowest average cost of producing a given volume of output it
anticipates.
BREAKEVEN ANALYSIS
The study of cost-volume-profit relationship is often referred as BEA. The
term BEA is interpreted in two senses. In its narrow sense, it is concerned
66
kumaraswamireddy
Mighty mech
with finding out BEP; BEP is the point at which total revenue is equal to total
cost. It is the point of no profit, no loss. In its broad determine the probable
profit at any level of production.
Assumptions:
1. All costs are classified into two fixed and variable.
2. Fixed costs remain constant at all levels of output.
3. Variable costs vary proportionally with the volume of output.
4. Selling price per unit remains constant in spite of competition or
change in the volume of production.
5. There will be no change in operating efficiency.
6. There will be no change in the general price level.
7. Volume of production is the only factor affecting the cost.
8. Volume of sales and volume of production are equal. Hence there is no
unsold stock.
9. There is only one product or in the case of multiple products. Sales mix
remains constant.
Merits:
1. Information provided by the Break Even Chart can be understood more
easily then those contained in the profit and Loss Account and the cost
statement.
2. Break Even Chart discloses the relationship between cost, volume and
profit. It reveals how changes in profit. So, it helps management in
decision-making.
3. It is very useful for forecasting costs and profits long term planning
and growth
4. The chart discloses profits at various levels of production.
5. It serves as a useful tool for cost control.
6. It can also be used to study the comparative plant efficiencies of the
industry.
7. Analytical Break-even chart present the different elements, in the costs
direct material, direct labour, fixed and variable overheads.
Demerits:
1. Break-even chart presents only cost volume profits. It ignores other
considerations such as capital amount, marketing aspects and effect of
government policy etc., which are necessary in decision making.
2. It is assumed that sales, total cost and fixed cost can be represented
as straight lines. In actual practice, this may not be so.
67
kumaraswamireddy
Mighty mech
3. It assumes that profit is a function of output. This is not always true.

The firm may increase the profit without increasing its output.
4. A major draw back of BEC is its inability to handle production and sale
of multiple products.
5. It is difficult to handle selling costs such as advertisement and sale
promotion in BEC.
6. It ignores economics of scale in production.
7. Fixed costs do not remain constant in the long run.
8. Semi-variable costs are completely ignored.
9. It assumes production is equal to sale. It is not always true because
generally there may be opening stock.
10. When production increases variable cost per unit may not remain
constant but may reduce on account of bulk buying etc.
11. The assumption of static nature of business and economic activities is a
well-known defect of BEC.
1. Fixed cost
2. Variable cost
3. Contribution
4. Margin of safety
5. Angle of incidence
6. Profit volume ratio
7. Break-Even-Point
1. Fixed cost: Expenses that do not vary with the volume of production are
known as fixed expenses. Eg. Managers salary, rent and taxes, insurance
etc. It should be noted that fixed changes are fixed only within a certain
range of plant capacity. The concept of fixed overhead is most useful in
formulating a price fixing policy. Fixed cost per unit is not fixed.
2. Variable Cost: Expenses that vary almost in direct proportion to the
volume of production of sales are called variable expenses. Eg. Electric
power and fuel, packing materials consumable stores. It should be noted
that variable cost per unit is fixed.
3. Contribution: Contribution is the difference between sales and variable
costs and it contributed towards fixed costs and profit. It helps in sales
and pricing policies and measuring the profitability of different proposals.
Contribution is a sure test to decide whether a product is worthwhile to be
continued among different products.
Contribution = Sales Variable cost
Contribution = Fixed Cost + Profit.

68
kumaraswamireddy
Mighty mech
4. Margin of safety: Margin of safety is the excess of sales over the break
even sales. It can be expressed in absolute sales amount or in percentage.
It indicates the extent to which the sales can be reduced without resulting
in loss. A large margin of safety indicates the soundness of the business.
The formula for the margin of safety is:
Present sales Break even sales
or
Profit
P. V. ratio
Margin of safety can be improved by taking the following steps.

1. Increasing production
2. Increasing selling price
3. Reducing the fixed or the variable costs or both
4. Substituting unprofitable product with profitable one.
5. Angle of incidence: This is the angle between sales line and total cost
line at the Break-even point. It indicates the profit earning capacity of the
concern. Large angle of incidence indicates a high rate of profit; a small
angle indicates a low rate of earnings. To improve this angle, contribution
should be increased either by raising the selling price and/or by reducing
variable cost. It also indicates as to what extent the output and sales price
can be changed to attain a desired amount of profit.
6. Profit Volume Ratio is usually called P. V. ratio. It is one of the most
useful ratios for studying the profitability of business. The ratio of
contribution to sales is the P/V ratio. It may be expressed in percentage.
Therefore, every organization tries to improve the P. V. ratio of each
product by reducing the variable cost per unit or by increasing the selling
price per unit. The concept of P. V. ratio helps in determining break evenpoint, a desired amount of profit etc.
The formula is,
Contribution
X 100
Sales
7. Break Even- Point: If we divide the term into three words, then it does
not require further explanation.
Break-divide
Even-equal
Point-place or position
Break Even Point refers to the point where total cost is equal to total
revenue. It is a point of no profit, no loss. This is also a minimum point
of no profit, no loss. This is also a minimum point of production where
total costs are recovered. If sales go up beyond the Break Even Point,
organization makes a profit. If they come down, a loss is incurred.

69
kumaraswamireddy
Mighty mech
Fixed Expenses
Contribution per unit
Fixed expenses
X sales
2. Break Even point (In Rupees) =
Contribution
1. Break Even point (Units) =
QUESTIONS
1. What cost concepts are mainly used for management decision making?
Illustrate.
2. The PV ratio of matrix books Ltd Rs. 40% and the margin of safety Rs.
30. You are required to work out the BEP and Net Profit. If the sales
volume is Rs. 14000/3. A Company reported the following results for two period
Period
Sales
Profit
I
Rs. 20,00,000
Rs. 2,00,000
II
Rs. 25,00,000
Rs. 3,00,000
Ascertain the BEP, PV ratio, fixes cost and Margin of Safety.
4. Write short notes on the following
a) Profit Volume ratio
b) Margin of Safety
5. Write short notes on: (i) Suck costs (ii) Abandonment costs
6. The information about Raj & Co are given below:
PV ratio
: 20%
Fixed Cost
: Rs. 36,000/Selling Price Per Unit: Rs. 150/Calculate (i) BEP in rupees (ii) BEP in Units
(iii) Variable cost per unit
(iv) Contribution per unit
7. Define opportunity cost. List out its assumptions & Limitation.
8. (a) Explain the utility of BEA in managerial decision making
(b) How do you explain break even chart? Explain.
9. Write short motes on:
(i) Fixed cost & variable cost
(ii) Out of pocket costs & imputed costs
(iii) Explicit & implicit Costs
(iv) Short rum cost
10. Write short note on the following:
(a) PV ratio
(b) Margin of Safety
(c) Angle of incidence
(d)
11. Explain Cost/Output relationship in the short run.
70
kumaraswamireddy
Mighty mech
12. Appraise the usefulness of BEA for a multi product organization

13. Describe the BEP with the help of a diagram and its uses in business
decision making.
14. If sales in 10000 units and selling price Rs. 20/- per unit. Variable cost
is Rs. 10/- per unit and fixed cost is Rs. 80000. Find out BEP in Units
and sales revenue what is profit earned? What should be the sales for
earning a profit of Rs. 60000/15. How do you determine BEP in terms of physical units and sales value?
Explain the concepts of margin of safety & angle of incidence.
16. Sales are 1,10,000 producing a profit of Rs. 4000/- in period I, sales
are 150000 producing a profit of Rs. 12000/- in period II. Determine
BEP & fixed expenses.
17. When a Mc change does Ac changed (a) at the same rate (b) at a
higher rate or (c) at a lower rate? Illustrate your answer with a
diagram.
18. Explain the relationship between MC, AC and TC assuming a short run
non-linear cost function.
19. Sale of a product amounts to 20 units per months at Rs. 10/- per unit.
Fixed overheads is Rs. 400/- per month and variable cost is Rs. 6/- per
unit. There is a proposal to reduce prices by 107. Calculate present and
future P-V ratio. How many units must be sold to earn a target profit of
present level?
QUIZ
1. The cost of best alternative forgone is_______________
(
)
(a) Outlay cost
(b) Past cost
(c) Opportunity cost
(d) Future cost
2. If we add up total fixed cost (TFC) and total variable cost (TVC),
we get__
(
)
(a) Average cost
(b) Marginal cost
(c) Total cost
(d) Future cost
3. ________ costs are theoretical costs, which are not recognized by the
Accounting system.
(
)
(a) Past
(b) Explicit
(c) Implicit
(d) Historical
4. _____cost is the additional cost to produce an additional unit of output.
(
)
71
kumaraswamireddy
(a) Incremental
(c) Marginal
Mighty mech
(b) Sunk
(d) Total
5. _______ costs are the costs, which are varies with the level of output.
(
)
(a) Fixed
(b) Past
(c) Variable
(d) Historical
6. _________________ costs are those business costs, which do not
Involve any cash payment.
(
)
(a) Past
(b) Historical
(c) Implicit
(d) Explicit
7. The opposite of Past cost is ________________________.
(
)
(a) Historical
(b) Fixed cost
(c) Future cost
(d) Variable cost
8. _____ is a period during which the existing physical capacity of the
Firm can be changed.
(
)
(a) Market period
(b) Short period
(c) Long period
(d) Medium period
9. What is the formula for Profit-Volume Ratio?
(
)
Sales
Variable cost
(a) --------------- X 100
(b) ----------------Contribution
Sales
(c)
Contribution
--------------- X 100
Sales
(b)
Fixed cost
----------------Sales
X 100
X 100
10. _______ is a point of sales at which there is neither profit nor loss.
(
)
(a) Maximum sales
(b) Minimum sales
(c) Break-Even sales
(d) Average sales
11. What is the formula for Margin of Safety?
(
)
(a) Break Even sales Actual sales (b) Maximum sales Actual sales
(c) Actual sales Break Even sales (d) Actual sales Minimum sales
12. What is the formula for Break-Even Point in Units?
(
)
(b) __Variable cost____
(a) __Contribution_____
Selling Price per unit
(d) __Variable cost____
(c) _ _Fixed cost _____
Selling Price per unit
13. What is the Other Name of Profit Volume Ratio?
(
)
72
kumaraswamireddy
(a) Cost-Volume-Profit Ratio

(c) Marginal Ratio
Mighty mech
(b) Margin of safety Ratio

(d) None
14. What is the break-even sales amount, when selling price per unit
is 10/- , Variable cost per unit is 6/- and fixed cost is 40,000/-.
(
)
(a) Rs. 4, 00,000/(b) Rs. 3, 00,000/(c) Rs. 1, 00,000/(d) Rs. 2, 00,000/15. Contribution is the excess amount of Actual Sales over ______.
(
)
(a) Fixed cost
(b) Sales
(c) Variable cost
(d) Total cost
UNIT IV
INTRODUCTION TO MARKET AND PRICING STRATEGIES
Pricing
Introduction
Pricing is an important, if not the most important function of all enterprises.
Since every enterprise is engaged in the production of some goods or/and
service. Incurring some expenditure, it must set a price for the same to sell it
in the market. It is only in extreme cases that the firm has no say in pricing
its product; because there is severe or rather perfect competition in the
market of the good happens to be of such public significance that its price is
decided by the government. In an overwhelmingly large number of cases, the
individual producer plays the role in pricing its product.
It is said that if a firm were good in setting its product price it would certainly
flourish in the market. This is because the price is such a parameter that it
exerts a direct influence on the products demand as well as on its supply,
leading to firms turnover (sales) and profit. Every manager endeavors to find
the price, which would best meet with his firms objective. If the price is set
73
kumaraswamireddy
Mighty mech
too high the seller may not find enough customers to buy his product. On the
other hand, if the price is set too low the seller may not be able to recover his
costs. There is a need for the right price further, since demand and supply
conditions are variable over time what is a right price today may not be so
tomorrow hence, pricing decision must be reviewed and reformulated from
time to time.
Price
Price denotes the exchange value of a unit of good expressed in terms of
money. Thus the current price of a maruti car around Rs. 2,00,000, the price
of a hair cut is Rs. 25 the price of a economics book is Rs. 150 and so on.
Nevertheless, if one gives a little, if one gives a little thought to this subject,
one would realize that there is nothing like a unique price for any good.
Instead, there are multiple prices.
Price concepts
Price of a well-defined product varies over the types of the buyers, place it is
received, credit sale or cash sale, time taken between final production and
sale, etc.
It should be obvious to the readers, that the price difference on account of
the above four factors are more significant. The multiple prices is more
serious in the case of items like cars refrigerators, coal, furniture and bricks
and is of little significance for items like shaving blade, soaps, tooth pastes,
creams and stationeries. Differences in various prices of any good are due to
differences
in transport cost, storage cost
accessories, interest cost,
intermediaries profits etc. Once can still conceive of a basic price, which
would be exclusive of all these items of cost and then rationalize other prices
by adding the cost of special items attached to the particular transaction, in
what follows we shall explain the determination of this basis price alone and
thus resolve the problem of multiple prices.
Price determinants Demand and supply
The price of a product is determined by the demand for and supply of that
product. According to Marshall the role of these two determinants is like that
of a pair of scissors in cutting cloth. It is possible that at times, while one pair
is held fixed, the other is moving to cut the cloth. Similarly, it is conceivable
that there could be situations under which either demand or supply is playing
a passive role, and the other, which is active, alone appear to be determining

74
kumaraswamireddy
Mighty mech
the price. However, just as one pair of scissors alone can never cut a cloth,
demand or supply alone is insufficient to determine the price.
Equilibrium Price
The price at which demand and supply of a commodity is equal known as
equilibrium price. The demand and supply schedules of a good are shown in
the table below.
Demand supply schedule
Price
Demand
Supply
50
100
200
40
120
180
30
150
150
20
200
110
10
300
50
Of the five possible prices in the above example, price Rs.30 would be the
market-clearing price. No other price could prevail in the market. If price is
Rs. 50 supply would exceed demand and consequently the producers of this
good would not find enough customers for their demand, thereby they would
accumulate unwanted inventories of output, which, in turn, would lead to
competition among the producers, forcing price to Rs.30. Similarly if price
were Rs.10, there would be excess demand, which would give rise to
competition among the buyers of good, forcing price to Rs.30. At price Rs.30,
demand equals supply and thus both producers and consumers are satisfied.
The economist calls such a price as equilibrium price.

75
kumaraswamireddy
Mighty mech
It was seen in unit 1 that the demand for a good depends on, a number of
factors and thus, every factor, which influences either demand or supply is in
fact a determinant of price. Accordingly, a change in demand or/and supply
causes price change.
MARKET
Market is a place where buyer and seller meet, goods and services are offered
for the sale and transfer of ownership occurs. A market may be also defined
as the demand made by a certain group of potential buyers for a good or
service. The former one is a narrow concept and later one, a broader concept.
Economists describe a market as a collection of buyers and sellers who
transact over a particular product or product class (the housing market, the
clothing market, the grain market etc.). For business purpose we define a
market as people or organizations with wants (needs) to satisfy, money to
spend, and the willingness to spend it. Broadly, market represents the
structure and nature of buyers and sellers for a commodity/service and the
process by which the price of the commodity or service is established. In this
sense, we are referring to the structure of competition and the process of
price determination for a commodity or service. The determination of price for
a commodity or service depends upon the structure of the market for that
commodity or service (i.e., competitive structure of the market). Hence the
understanding on the market structure and the nature of competition are a
pre-requisite in price determination.
Different Market Structures

Market structure describes the competitive environment in the market for any
good or service. A market consists of all firms and individuals who are willing
and able to buy or sell a particular product. This includes firms and individuals
currently engaged in buying and selling a particular product, as well as
potential entrants.
The determination of price is affected by the competitive structure of the
market. This is because the firm operates in a market and not in isolation. In
marking decisions concerning economic variables it is affected, as are all
institutions in society by its environment.

76
kumaraswamireddy
Mighty mech
Perfect Competition
Perfect competition refers to a market structure where competition among the
sellers and buyers prevails in its most perfect form. In a perfectly competitive
market, a single market price prevails for the commodity, which is
determined by the forces of total demand and total supply in the market.
Characteristics of Perfect Competition

The following features characterize a perfectly competitive market:
1. A large number of buyers and sellers: The number of buyers and
sellers is large and the share of each one of them in the market is so
small that none has any influence on the market price.
2. Homogeneous
product:
The
product
of
each
seller
is
totally
undifferentiated from those of the others.

3. Free entry and exit: Any buyer and seller is free to enter or leave the
market of the commodity.
4. Perfect knowledge: All buyers and sellers have perfect knowledge
about the market for the commodity.
5. Indifference: No buyer has a preference to buy from a particular seller
and no seller to sell to a particular buyer.
6. Non-existence of transport costs: Perfectly competitive market also
assumes the non-existence of transport costs.
7. Perfect mobility of factors of production: Factors of production must
be in a position to move freely into or out of industry and from one
firm to the other.
Under such a market no single buyer or seller plays a significant role in price
determination. One the other hand all of them jointly determine the price.
The price is determined in the industry, which is composed of all the buyers
and seller for the commodity. The demand curve facing the industry is the
sum of all consumers demands at various prices. The industry supply curve is
the sum of all sellers supplies at various prices.

77
kumaraswamireddy
Mighty mech
Pure competition and perfect competition

The term perfect competition is used in a wider sense. Pure competition has
only limited assumptions. When the assumptions, that large number of
buyers and sellers, homogeneous products, free entry and exit are satisfied,
there exists pure competition. Competition becomes perfect only when all the
assumptions (features) are satisfied. Generally pure competition can be seen
in agricultural products.
Equilibrium of a firm and industry under perfect competition
Equilibrium is a position where the firm has no incentive either to expand or
contrast its output. The firm is said to be in equilibrium when it earn
maximum profit. There are two conditions for attaining equilibrium by a firm.
They are:
Marginal cost is an additional cost incurred by a firm for producing and
additional unit of output. Marginal revenue is the additional revenue accrued
to a firm when it sells one additional unit of output. A firm increases its
output so long as its marginal cost becomes equal to marginal revenue. When
marginal cost is more than marginal revenue, the firm reduces output as its
costs exceed the revenue. It is only at the point where marginal cost is equal
to marginal revenue, and then the firm attains equilibrium. Secondly, the
marginal cost curve must cut the marginal revenue curve from below. If
marginal cost curve cuts the marginal revenue curve from above, the firm is
having the scope to increase its output as the marginal cost curve slopes
downwards. It is only with the upward sloping marginal cost curve, there the
firm attains equilibrium. The reason is that the marginal cost curve when
rising cuts the marginal revenue curve from below.

78
kumaraswamireddy
Mighty mech
The equilibrium of a perfectly competitive firm may be explained with the help
of the fig. 6.2.
In the given fig. PL and MC represent the Price line and Marginal cost curve.
PL also represents Marginal revenue, Average revenue and demand. As
Marginal revenue, Average revenue and demand are the same in perfect
competition, all are equal to the price line. Marginal cost curve is U- shaped
curve cutting MR curve at R and T. At point R marginal cost becomes equal to
marginal revenue. But MC curve cuts the MR curve fro above. So this is not
the equilibrium position. The downward sloping marginal cost curve indicates
that the firm can reduce its cost of production by increasing output. As the
firm expands its output, it will reach equilibrium at point T. At this point, on
price line PL; the two conditions of equilibrium are satisfied. Here the
marginal cost and marginal revenue of the firm remain equal. The firm is
producing maximum output and is in equilibrium at this stage. If the firm
continues its output beyond this stage, its marginal cost exceeds marginal
revenue resulting in losses. As the firm has no idea of expanding or
contracting its size of out, the firm is said to be in equilibrium at point T.
Pricing under perfect competition
The price or value of a commodity under perfect competition is determined by
the demand for and the supply of that commodity.
Under perfect competition there is large number of sellers trading in a
homogeneous product. Each firm supplies only very small portion of the
market demand. No single buyer or seller is powerful enough to influence the
price. The demand of all consumers and the supply of all firms together
determine the price. The individual seller is only a price taker and not a price
maker. An individual firm has no price policy of its own. Thus, the main
problem of a firm in a perfectly competitive market is not to determine the
price of its product but to adjust its output to the given price, So that the
profit is maximum.
Marshall however gives great importance to the time
element for the determination of price. He divided the time periods on the
basis of supply and ignored the forces of demand. He classified the time into
four periods to determine the price as follows.
1. Very short period or Market period
2. Short period
3. Long period
4. Very long period or secular period

79
kumaraswamireddy
Mighty mech
Very short period: It is the period in which the supply is more or less fixed
because the time available to the firm to adjust the supply of the commodity
to its changed demand is extremely short; say a single day or a few days.
The price determined in this period is known as Market Price.
Short Period: In this period, the time available to firms to adjust the supply
of the commodity to its changed demand is, of course, greater than that in
the market period. In this period altering the variable factors like raw
materials, labour, etc can change supply. During this period new firms cannot
enter into the industry.
Long period: In this period, a sufficiently long time is available to the firms
to adjust the supply of the commodity fully to the changed demand. In this
period not only variable factors of production but also fixed factors of
production can be changed. In this period new firms can also enter the
industry. The price determined in this period is known as long run normal
price.
Secular Period: In this period, a very long time is available to adjust the
supply fully to change in demand. This is very long period consisting of a
number of decades. As the period is very long it is difficult to lay down
principles determining the price.
Price Determination in the market period

The price determined in very short period is known as Market price. Market
price is determined by the equilibrium between demand and supply in a
market period. The nature of the commodity determines the nature of supply
curve in a market period. Under this period goods are classified in to (a)
Perishable goods and (b) Non-perishable goods.
Perishable Goods: In the very short period, the supply of perishable goods
like fish, milk vegetables etc. cannot be increased. And it cannot be decreased
also. As a result the supply curve under very short period will be parallel to
the Y-axis or Vertical to X-axis. Supply is perfectly inelastic. The price
determination of perishable goods in very short period may be shown with the
help of the following fig. 6.5

80
kumaraswamireddy
Mighty mech
In this figure quantity is represented along X-axis and price is represented

along Y-axis. MS is the very short period supply curve of perishable goods.
DD is demand curve. It intersects supply curve at E. The price is OP. The
quantity exchanged is OM. D1 D1 represents increased demand. This curve
cuts the supply curve at E1. Even at the new equilibrium, supply is OM only.
But price increases to OP1. So, when demand increases, the price will
increase but not the supply. If demand decreases new demand curve will be
D2 D2. This curve cuts the supply curve at E2. Even at this new equilibrium,
the supply is OM only. But price falls to OP2. Hence in very short period,
given the supply, it is the change in demand that influences price. The price
determined in a very short period is called Market Price.
Non-perishable goods: In the very short period, the supply of nonperishable goods like cloth, pen, watches etc. cannot be increased. But if
price falls, preserving some stock can decrease their supply. If price falls too
much, the whole stock will be held back from the market and carried over to
the next market period. The price below, which the seller will refuse to sell, is
called Reserve Price.
The Price determination of non-perishable goods in very short period may be
shown with the help of the following fig 6.6.

81
kumaraswamireddy
Mighty mech
In the given figure quantity is shown on X-axis and the price on Y-axis. SES is
the supply curve. It slopes upward up to the point E. From E it becomes a
vertical straight line. This is because the quantity existing with sellers is OM,
the maximum amount they have is thus OM. Till OM quantity (i.e., point E)
the supply curve sloped upward. At the point S, nothing is offered for sale.
It means that the seller with hold the entire stock if the price is OS. OS is
thus the reserve price. As the price rises, supply increases up to point E. At
OP price (Point E), the entire stock is offered for sale.
Suppose demand increases, the DD curve shift upward. It becomes D1D1
price raises to OP1. If demand decreases, the demand curve becomes D2D2.
It intersects the supply curve at E3. The price will fall to OP3. We find that at
OS price, supply is zero. It is the reserve price.
Price Determination in the short period

Short period is a period in which supply can be increased by altering the
variable factors. In this period fixed costs will remain constant. The supply is
increased when price rises and vice versa. So the supply curve slopes
upwards from left to right.
The price in short period may be explained with the help of a diagram.

82
kumaraswamireddy
Mighty mech
In the given diagram MPS is the market period supply curve. DD is the initial
demand curve. It intersects MPS curve at E. The price is OP and out put OM.
Suppose demand increases, the demand curve shifts upwards and becomes
D1D1. In the very short period, supply remains fixed on OM. The new
demand curve D1D1 intersects MPS at E1. The price will rise to OP1. This is
what happen in the very short-period.
As the price rises from OP to OP1, firms expand output. As firms can vary
some factors but not all, the law of variable proportions operates. This results
in new short-run supply curve SPS. It interests D1 D1 curve at E4. The price
will fall from OP1 to OP4.
It the demand decreases, DD curve shifts downward and becomes D2D2. It
interests MPS curve at E2. The price will fall to OP2. This is what happens in
market period. In the short period, the supply curve is SPS. D2D2 curve
interests SPS curve at E3. The short period price is higher than the market
period price.
Price determination in the long period (Normal Price)

Market price may fluctuate due to a sudden change either on the supply side
or on the demand side. A big arrival of milk may decrease the price of that
production in the market period. Similarly, a sudden cold wave may raise the
price of woolen garments. This type of temporary change in supply and
demand may cause changes in market price. In the absence of such
83
kumaraswamireddy
Mighty mech
disturbing causes, the price tends to come back to a certain level. Marshall
called this level is normal price level. In the words of Marshall Normal value
(Price) of a commodity is that which economics force would tend to bring
about in the long period.
In order to describe how long run normal price is determined, it is useful to
refer to the market period as short period also. The market period is so short
that no adjustment in the output can be made. Here cost of production has no
influence on price. A short period is sufficient only to allow the firms to make
only limited output adjustment. In the long period, supply conditions are fully
sufficient to meet the changes in demand. In the long period, all factors are
alterable and the new firms may enter into or old firms leave the; industry.
In the long period all costs are variable costs. So supply will be increased only
when price is equal to average cost.
Hence, in long period normal price will be equal to minimum average cost of
the industry. Will this price be more or less than the short period normal
price? The answer depends on the stage of returns to which the industry is
subject. There are three stages of return on the stage of returns to which the
industry is subject. There are three stages of returns.
1. Increasing returns or decreasing costs.
2. Constant Returns or Constant costs.
3. Diminishing returns or increasing costs.
1. Determination of long period normal price in decreasing cost
industry:
At this stage, average cost falls due to an increase in the output. So,
the supply
curve at this stage will slope downwards from left to right.
The long period Normal price determination at this stage can be

explained with the help of a diagram.

84
kumaraswamireddy
Mighty mech
In the diagram, MPS represents market period supply curve. DD is

demand curve. DD cuts LPS, SPS and MPS at point E. At point E the
supply is OM and the price is OP. If demand increases from DD to D1D1
market price increases to OP1. In the short period it is OP2. In the long
period supply increases considerably to OM3. So price has fallen to OP3,
which is less than the price of market period.
2. Determination of Long Period Normal Price in Constant Cost

Industry:
In this case average cost does not change even though the
output increases. Hence long period supply curve is horizontal to X-axis.
The determination of long period normal price can be explained with the
help of the diagram. In the fig. 6.9, LPS is horizontal to X-axis. MPS
represents market period supply curve, and SPS represents short period
supply curve. At point E the output is OM and price is OP. If demand
increases from DD to D1D1 market price increases to OP1. In the short
period, supply increases and hence the price will be OP2. In the long run
supply is adjusted fully to meet increased demand. The price remains
constant at OP because costs are constant at OP and market is perfect
market.

85
kumaraswamireddy
Mighty mech
3. Determination of long period normal price in increase cost

industry:
If the industry is subject to increasing costs (diminishing returns) the supply
curve slopes upwards from left to right like an ordinary supply curve. The
determination of long period normal price in increasing cost industry can be
explained with the help of the following diagram. In the diagram LPS
represents long period supply curve. The industry is subject to diminishing
return or increasing costs. So, LPS slopes upwards from left to right. SPS is
short period supply curve and MPS is market period supply curve. DD is
demand curve. It cuts all the supply curves at E. Here the price is OP and
output is OM. If demand increases from DD to D1D1 in the market period,
supply will not change but the price increases to OP1. In the short period,
price increase but the price increases to OP1. In the short period, price
increases to OP2 as the supply increased from OM to OM2. In the long period
supply increases to OM3 and price increases to OP3. But this increase in price
is less than the price increase in a market period or short period.

86
kumaraswamireddy
Mighty mech
Monopoly
The word monopoly is made up of two syllables, Mono and poly. Mono means
single while poly implies selling. Thus monopoly is a form of market
organization in which there is only one seller of the commodity. There are no
close substitutes for the commodity sold by the seller. Pure monopoly is a
market situation in which a single firm sells a product for which there is no
good substitute.
Features of monopoly
The following are the features of monopoly.
1. Single person or a firm: A single person or a firm controls the total
supply of the commodity. There will be no competition for monopoly
firm. The monopolist firm is the only firm in the whole industry.
2. No close substitute: The goods sold by the monopolist shall not have
closely competition substitutes. Even if price of monopoly product
increase people will not go in far substitute. For example: If the price
of electric bulb increase slightly, consumer will not go in for kerosene
lamp.
3. Large number of Buyers: Under monopoly, there may be a large
number of buyers in the market who compete among themselves.
4. Price Maker: Since the monopolist controls the whole supply of a
commodity, he is a price-maker, and then he can alter the price.

87
kumaraswamireddy
Mighty mech
5. Supply and Price: The monopolist can fix either the supply or the
price. He cannot fix both. If he charges a very high price, he can sell a
small amount. If he wants to sell more, he has to charge a low price.
He cannot sell as much as he wishes for any price he pleases.
6. Downward Sloping Demand Curve: The demand curve (average
revenue curve) of monopolist slopes downward from left to right. It
means that he can sell more only by lowering price.
Types of Monopoly
Monopoly may be classified into various types. The different types of
monopolies are explained below:
1. Legal Monopoly: If monopoly arises on account of legal support or as
a matter of legal privilege, it is called Legal Monopoly. Ex. Patent
rights, special brands, trade means, copyright etc.
2. Voluntary Monopoly: To get the advantages of monopoly some
private firms come together voluntarily to control the supply of a
commodity. These are called voluntary monopolies. Generally, these
monopolies
arise
with
industrial
combinations.
These
voluntary
monopolies are of three kinds (a) cartel (b) trust (c) holding company.
It may be called artificial monopoly.
3. Government Monopoly: Sometimes the government will take the
responsibility of supplying a commodity and avoid private interference.
Ex. Water, electricity. These monopolies, created to satisfy social
wants, are formed on social considerations. These are also called Social
Monopolies.
4. Private Monopoly: If the total supply of a good is produced by a
single private person or firm, it is called private monopoly. Hindustan
Lever Ltd. Is having the monopoly power to produce Lux Soap.
5. Limited Monopoly: if the monopolist is having limited power in fixing
the price of his product, it is called as Limited Monopoly. It may be
due to the fear of distant substitutes or government intervention or the
entry of rivals firms.
6. Unlimited Monopoly: If the monopolist is having unlimited power in
fixing the price of his good or service, it is called unlimited monopoly.
Ex. A doctor in a village.
7. Single Price Monopoly: When the monopolist charges same price for
all units of his product, it is called single price monopoly. Ex. Tata
Company charges the same price to all the Tata Indiaca Cars of the
same model.
8. Discriminating Monopoly: When a Monopolist charges different
prices to different consumers for the same product, it is called
88
kumaraswamireddy
Mighty mech
discriminating monopoly. A doctor may take Rs.20 from a rich man and
only Rs.2 from a poor man for the same treatment.
9. Natural Monopoly: Sometimes monopoly may arise due to scarcity of
natural resources. Nature provides raw materials only in some places.
The owner of the place will become monopolist. For Ex. Diamond mine
in South Africa.
Pricing under Monopoly

Monopoly refers to a market situation where there is only one seller. He has
complete control over the supply of a commodity. He is therefore in a position
to fix any price. Under monopoly there is no distinction between a firm and an
industry. This is because the entire industry consists of a single firm.
Being the sole producer, the monopolist has complete control over the supply
of the commodity. He has also the power to influence the market price. He
can raise the price by reducing his output and lower the price by increasing
his output. Thus he is a price-maker. He can fix the price to his maximum
advantages. But he cannot fix both the supply and the price, simultaneously.
He can do one thing at a time. If the fixes the price, his output will be
determined by the market demand for his commodity. On the other hand, if
he fixes the output to be sold, its market will determine the price for the
commodity. Thus his decision to fix either the price or the output is
determined by the market demand.
The market demand curve of the monopolist (the average revenue curve) is
downward sloping. Its corresponding marginal revenue curve is
also
downward sloping. But the marginal revenue curve lies below the average
89
kumaraswamireddy
Mighty mech
revenue curve as shown in the figure. The monopolist faces the down-sloping
demand curve because to sell more output, he must reduce the price of his
product. The firms demand curve and industrys demand curve are one and
the same. The average cost and marginal cost curve are U shaped curve.
Marginal cost falls and rises steeply when compared to average cost.
Price output determination (Equilibrium Point)

The monopolistic firm attains equilibrium when its marginal cost becomes
equal to the marginal revenue. The monopolist always desires to make
maximum profits. He makes maximum profits when MC=MR. He does not
increasing his output if his revenue exceeds his costs. But when the costs
exceed the revenue, the monopolist firm incur loses. Hence the monopolist
curtails his production. He produces up to that point where additional cost is
equal to the additional revenue (MR=MC). Thus point is called equilibrium
point. The price output determination under monopoly may be explained with
the help of a diagram.
In the diagram 6.12 the quantity supplied or demanded is shown along Xaxis. The cost or revenue is shown along Y-axis. AC and MC are the average
cost and marginal cost curves respectively. AR and MR curves slope
downwards from left to right. AC and MC and U shaped curves. The
monopolistic firm attains equilibrium when its marginal cost is equal to
marginal revenue (MC=MR). Under monopoly, the MC curve may cut the MR
curve from below or from a side. In the diagram, the above condition is
satisfied at point E. At point E, MC=MR. The firm is in equilibrium. The
equilibrium output is OM.
The above diagram (Average revenue) = MQ or OP
Average cost = MR
Profit per unit = Average Revenue-Average cost=MQ-MR=QR
Total Profit = QRXSR=PQRS

90
kumaraswamireddy
Mighty mech
The area PQRS resents the maximum profit earned by the monopoly firm.
But it is not always possible for a monopolist to earn super-normal profits. If
the demand and cost situations are not favorable, the monopolist may realize
short run losses.
Through the monopolist is a price marker, due to weak demand and high
costs; he suffers a loss equal to PABC.
If AR > AC -> Abnormal or super normal profits.
If AR = AC -> Normal Profit
If AR < AC -> Loss
In the long run the firm has time to adjust his plant size or to use existing
plant so as to maximize profits.
Monopolistic competition
Perfect competition and pure monopoly are rate phenomena in the real world.
Instead, almost every market seems to exhibit characteristics of both perfect
competition and monopoly. Hence in the real world it is the state of imperfect
competition lying between these two extreme limits that work. Edward. H.
Chamberlain developed the theory of monopolistic competition, which

91
kumaraswamireddy
Mighty mech
presents a more realistic picture of the actual market structure and the nature
of competition.
Characteristics of Monopolistic Competition

The important characteristics of monopolistic competition are:
1. Existence of Many firms: Industry consists of a large number of
sellers, each one of whom does not feel dependent upon others. Every
firm acts independently without bothering about the reactions of its
rivals. The size is so large that an individual firm has only a relatively
small part in the total market, so that each firm has very limited
control over the price of the product. As the number is relatively large
it is difficult for these firms to determine its price- output policies
without considering the possible reactions of the rival forms. A
monopolistically competitive firm follows an independent price policy.
2. Product Differentiation: Product differentiation means that products
are different in some ways, but not altogether so. The products are not
identical but the same time they will not be entirely different from each
other. IT really means that there are various monopolist firms
competing with each other. An example of monopolistic competition
and product differentiation is the toothpaste produced by various firms.
The product of each firm is different from that of its rivals in one or
more respects. Different toothpastes like Colgate, Close-up, Forehans,
Cibaca, etc., provide an example of monopolistic competition. These
products are relatively close substitute for each other but not perfect
substitutes. Consumers have definite preferences for the particular
verities or brands of products offered for sale by various sellers.
Advertisement,
packing,
trademarks,
brand
names
etc.
help
differentiation of products even if they are physically identical.

3. Large Number of Buyers: There are large number buyers in the
market. But the buyers have their own brand preferences. So the
sellers are able to exercise a certain degree of monopoly over them.
Each seller has to plan various incentive schemes to retain the
customers who patronize his products.
4. Free Entry and Exist of Firms: As in the perfect competition, in the
monopolistic competition too, there is freedom of entry and exit. That
is, there is no barrier as found under monopoly.
5. Selling costs: Since the products are close substitute much effort is
needed to retain the existing consumers and to create new demand.

92
kumaraswamireddy
Mighty mech
So each firm has to spend a lot on selling cost, which includes cost on
advertising and other sale promotion activities.
6. Imperfect Knowledge: Imperfect knowledge about the product leads
to monopolistic competition. If the buyers are fully aware of the quality
of the product they cannot be influenced much by advertisement or
other sales promotion techniques. But in the business world we can
see that thought the quality of certain products is the same, effective
advertisement and sales promotion techniques make certain brands
monopolistic. For
examples, effective dealer
service backed by
advertisement-helped popularization of some brands through the

quality of almost all the cement available in the market remains the
same.
7. The Group: Under perfect competition the term industry refers to all
collection of firms producing a homogenous product. But under
monopolistic competition the products of various firms are not identical
through they are close substitutes. Prof. Chamberlin called the
collection of firms producing close substitute products as a group.
Price Output Determination under Monopolistic Competition

Since under monopolistic competition different firms produce different
varieties of products, different prices for them will be determined in the
market depending upon the demand and cost conditions. Each firm will set
the price and output of its own product. Here also the profit will be maximized
when marginal revenue is equal to marginal cost.
Short-run equilibrium of the firm:
In the short-run the firm is in equilibrium when marginal Revenue = Marginal
Cost. In Fig 6.15 AR is the average revenue curve. NMR marginal revenue
curve, SMC short-run marginal cost curve, SAC short-run average cost curve,
MR and SMC interest at point E where output in OM and price MQ (i.e. OP).
Thus the equilibrium output or the maximum profit output is OM and the price
MQ or OP. When the price (average revenue) is above average cost a firm will
be making supernormal profit. From the figure it can be seen that AR is above
AC in the equilibrium point. As AR is above AC, this firm is making abnormal
profits in the short-run. The abnormal profit per unit is QR, i.e., the difference
between AR and AC at equilibrium point and the total supernormal profit is
OR X OM. This total abnormal profits is represented by the rectangle PQRS.
As the demand curve here is highly elastic, the excess price over marginal
cost is rather low. But in monopoly the demand curve is inelastic. So the gap
between price and marginal cost will be rather large.
93
kumaraswamireddy
Mighty mech
If the demand and cost conditions are less favorable the monopolistically
competitive firm may incur loss in the short-run fig 6.16 Illustrates this. A
firm incurs loss when the price is less than the average cost of production. MQ
is the average cost and OS (i.e. MR) is the price per unit at equilibrium output
OM. QR is the loss per unit. The total loss at an output OM is OR X OM. The
rectangle PQRS represents the total loses in the short run.
Long Run
Equilibrium of the
Firm:
A monopolistically competitive firm will be long run equilibrium at the

output level where marginal cost equal to marginal revenue. Monopolistically
competitive firm in the long run attains equilibrium where MC=MR and AC=AR
Fig 6.17 shows this trend.

94
kumaraswamireddy
Mighty mech
Oligopoly
The term oligopoly is derived from two Greek words, oligos meaning a few,
and pollen meaning to sell. Oligopoly is the form of imperfect competition
where there are a few firms in the market, producing either a homogeneous
product or producing products, which are close but not perfect substitute of
each other.
Characteristics of Oligopoly
The main features of oligopoly are:
1. Few Firms: There are only a few firms in the industry. Each firm
contributes a sizeable share of the total market. Any decision taken by

one firm influence the actions of other firms in the industry. The
various firms in the industry compete with each other.
2. Interdependence: As there are only very few firms, any steps taken
by one firm to increase sales, by reducing price or by changing product

design or by increasing advertisement expenditure will naturally affect
the sales of other firms in the industry. An immediate retaliatory action
can be anticipated from the other firms in the industry every time
when one firm takes such a decision. He has to take this into account
when he takes decisions. So the decisions of all the firms in the
industry are interdependent.
3. Indeterminate Demand Curve: The interdependence of the firms
makes their demand curve indeterminate. When one firm reduces price
other firms also will make a cut in their prices. So he firm cannot be
95
kumaraswamireddy
Mighty mech
certain about the demand for its product. Thus the demand curve
facing
an
oligopolistic
firm
loses
its
definiteness
and
thus
is
indeterminate as it constantly changes due to the reactions of the rival

firms.
4. Advertising and selling costs: Advertising plays a greater role in the
oligopoly market when compared to other market systems. According

to Prof. William J. Banumol it is only oligopoly that advertising comes
fully into its own. A huge expenditure on advertising and sales
promotion techniques is needed both to retain the present market
share and to increase it. So Banumol concludes under oligopoly,
advertising can become a life-and-death matter where a firm which
fails to keep up with the advertising budget of its competitors may find
its customers drifting off to rival products.
5. Price Rigidity: In the oligopoly market price remain rigid. If one firm
reduced price it is with the intention of attracting the customers of

other firms in the industry. In order to retain their consumers they will
also reduce price. Thus the pricing decision of one firm results in a loss
to all the firms in the industry. If one firm increases price. Other firms
will remain silent there by allowing that firm to lost its customers.
Hence, no firm will be ready to change the prevailing price. It causes
price rigidity in the oligopoly market.
OTHER MARKET STRUCTURES

Duopoly
Duopoly refers to a market situation in which there are only two sellers. As
there are only two sellers any decision taken by one seller will have reaction
from the other Eg. Coca-Cola and Pepsi. Usually these two sellers may agree
to co-operate each other and share the market equally between them, So
that they can avoid harmful competition.
The duopoly price, in the long run, may be a monopoly price or competitive
price, or it may settle at any level between the monopoly price and
competitive price. In the short period, duopoly price may even fall below the
level competitive price with the both the firms earning less than even the
normal price.
Monopsony
Mrs. Joan Robinson was the first writer to use the term monopsony to refer to
market, which there is a single buyer. Monoposony is a single buyer or a
purchasing agency, which buys the show, or nearly whole of a commodity or
96
kumaraswamireddy
Mighty mech
service produced. It may be created when all consumers of a commodity are

organized together and/or when only one consumer requires that commodity
which no one else requires.
Bilateral Monopoly
A bilateral monopoly is a market situation in which a single seller (Monopoly)
faces a single buyer (Monoposony). It is a market of monopoly-monoposy.
Oligopsony
Oligopsony is a market situation in which there will be a few buyers and many
sellers. As the sellers are more and buyers are few, the price of product will
be comparatively low but not as low as under monopoly.
PRICING METHODS
The micro economic principle of profit maximization suggests pricing by the
marginal analysis. That is by equating MR to MC. However the pricing
methods followed by the firms in practice around the world rarely follow this
procedure. This is for two reasons; uncertainty with regard to demand and
cost function and the deviation from the objective of short run profit
maximization.
It was seen that there is no unique theory of firm behavior. While profit
certainly on important variable for which every firm cares. Maximization of
short run profit is not a popular objective of a firm today. At the most firms
seek maximum profit in the long run. If so the problem is dynamic and its
solution requires accurate knowledge of demand and cost conditions over
time. Which is impossible to come by?
In view of these problems economic prices are a rare phenomenon. Instead,
firms set prices for their products through several alternative means. The
important pricing methods followed in practice are shown in the chart.

97
kumaraswamireddy
Mighty mech
Cost Based Pricing

There are three versions of the cost based pricing. Full cost or break even
pricing, cost plus pricing and the marginal cost pricing. Under the first
version, price just equals the average (total) cost. In the second version,
some mark-up is added to the average cost in arriving at the price. In the last
version, price is set equal to the marginal cost.
While all these methods
appear to be easy and straight forward, they are in fact associated with a
number of difficulties. Even through difficulties are there, the cost- oriented
pricing is quite popular today.
The cost based pricing has several strengths as well as limitations. The
advantages are its simplicity, acceptability and consistency with the target
rate of return on investment and the price stability in general. The limitations
are difficulties in getting accurate estimates of cost (particularly of the future
cost rather than the historic cost) Volatile nature of the variable cost and its
ignoring of the demand side of the market etc.
Competition based pricing
Some commodities are priced according to the competition in their markets.
Thus we have the going rate method of price and the sealed bid pricing
technique. Under the former a firm prices its new product according to the
prevailing prices of comparable products in the market. If the product is new
in the country, then its import cost inclusive of the costs of certificates,
insurance, and freight and customs duty, is used as the basis for pricing,
98
kumaraswamireddy
Mighty mech
Incidentally, the price is not necessarily equal to the import cost, but to the
firm is either new in the country, or is a close substitute or complimentary to
some other products, the prices of hitherto existing bands or / and of the
related goods are taken in to a account while deciding its price. Thus, when
television was first manufactures in India, its import cost must have been a
guiding force in its price determination. Similarly, when
maruti car was first manufactured in India, it must have taken into account
the prices of existing cars, price of petrol, price of car accessories, etc.
Needless to say, the going rate price could be below or above the average
cost and it could even be an economic price.
The sealed bid pricing method is quite popular in the case of construction
activities and in the disposition of used produces. In this method the
prospective seller (buyers) are asked to quote their prices through a sealed
cover, all the offers are opened at a preannounce time in the presence of all
the competitors, and the one who quoted the least is awarded the contract
(purchase / sale deed). As it sound, this method is totally competition based
and if the competitors unit by any change, the buyers (seller) may have to
pay (receive) an exorbitantly high (too low) price, thus there is a great
degree of risk attached to this method of pricing.
Demand Based Pricing

The demand based pricing and strategy based pricing are quite related.
The seller knows rather well that the demand for its product is a decreasing
function of the price its sets for product. Thus if seller wishes to sell more he
must reduce the price of his product, and if he wants a good price for his
product, he could sell only a limited quantity of his good. Demand oriented
pricing rules imply establishment of prices in accordance with consumer
preference and perceptions and the intensity of demand.
Two general types demand oriented pricing rules can be identified.
i.
Perceived value pricing and
ii.
Differential pricing
Perceived value pricing considers the buyers perception of the value of the
product ad the basis of pricing. Here the pricing rule is that the firm must
develop procedures for measuring the relative value of the product as
perceived
by
consumers.
Differential
pricing

99
is
nothing
but
price
kumaraswamireddy
Mighty mech
discrimination. In involves selling a product or service for different prices in

different market segments. Price differentiation depends on geographical
location of the consumers, type of consumer, purchasing quantity, season,
time of the service etc. E.g. Telephone charges, APSRTC charges.
Strategy based pricing (new product pricing)

A firm which products a new product, if it is also new to industry, can earn
very good profits it if handles marketing carefully, because of the uniqueness
of the product. The price fixed for the new product must keep the competitors
away. Earn good profits for the firm over the life of the product and must help
to get the product accepted. The company can select either skimming pricing
or penetration pricing.
While there are some firms, which follow the strategy of price penetration,
there are some others who opt for price skimming. Under the former, firms
sell their new product at a low price in the beginning in order to catch the
attention of consumers, once the product image and credibility is established,
the seller slowly starts jacking up the price to reap good profits in future.
Under this strategy, a firm might well sell its product below the cost of
production and thus runs into losses to start with but eventually it recovers all
its losses and even makes good overall profits. The Rin washing soap perhaps
falls into this category. This soap was sold at a rather low price in the
beginning and the firm even distributed free samples. Today, it is quite an
expensive brand and yet it is selling very well. Under the price skimming
strategy, the new product is priced high in the beginning, and its price is
reduced gradually as it faces a dearth of buyers such a strategy may be
beneficial for products, which are fancy, but of poor quality and / or of
insignificant use over a period of time.
A prudent producer follows a good mix of the various pricing methods rather
than adapting any once of them. This is because no method is perfect and
every method has certain good features further a firm might adopt one
method at one time and another method at some other accession.

100
kumaraswamireddy
Mighty mech
QUESTIONS
1. Explain how a firm attains equilibrium in the short run and in the long
run under conditions of perfect competition.
2. Explain the following with the help of the table and diagram under
perfect competition and monopoly
(a) Total Revenue
(b) Marginal Revenue
(c) Average Revenue
3. Define monopoly. How is price under monopoly determined?
4. Explain the role of time factor in the determination of price. Also
explain price-O/P determination in case of perfect competition.
5. (a) Distinguish between perfect & imperfect markets (b) What are the
different market situations in imperfect competition.
6. Perfect competition results in larger O/P with lower price than a
monopoly Discuss.
7. Compare between monopoly and perfect competition.
8. What is price discrimination? Explain essential conditions for price
discrimination.
9. Explain the following (a) Monopoly (B) Duopoly (c) Oligopoly (d)
imperfect competition.
10. What is a market? Explain, in brief, the different market structures.
11. Monopoly is disappearing from markets. Do you agree with this
statement? Do you advocate for monopoly to continue in market
situations.
QUIZ
1. Exchange value of a unit of good expressed in terms of money
is called
(a) Cost
(b) Capital
(c) Price
(d) Expenditure

101
kumaraswamireddy
2. The price of a product is determined by the ______of that product

(a) Place and time
(c) Demand and supply
Mighty mech
(b) Production and sales

(d) Cost and income
3. The price at which demand and supply of a commodity equal is

)
Known as
(a) High price
(b) Low price
(c) Equilibrium price
(d) Marginal price
4. A market where large number of buyers and sellers dealing in

)
Homogeneous product with perfect knowledge is called
(a) Imperfect competition
(b) Monopoly
(c) Perfect competition
(d) Monopolistic competition
5. In which market, single market price prevails for the commodity

)
(a) Monopoly market
(b) Oligopoly market
(c) Perfect competition market
(d) Duopoly market
6. The Price determined in the very short period is known as_____.

)
(a) Secular price
(b) Normal price
(c) Market price
(d) Short run price
7. In which period, the supply of commodity is fixed

)
(a) Short period
(b) Long period
(c) Very short period
(d) Very long period
8. Charging very high price in the beginning and reducing it gradually

)
is called
(a) Differential pricing
(b) Sealed bid pricing
(c) Skimming pricing
(d) Penetration pricing
9. If monopoly arises on account of legal support or as a matter

)
of legal Privilege, it is called as

(a) Private monopoly
(c) Legal monopoly
(
(b) Government monopoly
(d) Single price monopoly
10. Under which pricing method, price just equals the total cost
)
(a) Marginal cost pricing
(c) Full cost pricing
(b) Cost plus pricing

(d) Going rate pricing

102
kumaraswamireddy
Mighty mech
11. ______ is a place in which goods and services are bought and sold.
)
(a) Factory
(b) Workshop
(c) Market
(d) Warehouse
12. ___________________ is the example for perishable goods.

)
(a) Pens
(b) Belts
(c) Vegetables
(d) Cloths
13. ____________________is a form of market organization in which

There is only one seller of the commodity.
)
(a) Perfect Competition
(b) Duopoly
(c) Monopoly
(d) Oligopoly
14. If average Revenue is greater than the Average cost, monopolist

Earns __ .
)
(a) Loss
(b) No loss No profit
(c) Profit
(d) None
15. The firm is said to be in equilibrium, when its Marginal Cost (MC)
Equals to___ .
)
(a) Total cost
(b) Total revenue
(c) Marginal Revenue
(d) Average Revenue
16. ___________ is a position where the firm has no incentive either
to expand or contrast its output.
)
(a) Maximum output
(b) Minimum output
(c) Equilibrium
(d) None
17. Marginal revenue, Average revenue and Demand are the same
in ________ Market Environment
)
(a) Monopoly
(b) Duopoly
(c) Perfect Competition
(d) Imperfect Competition
18. _________ is a period in which supply can be increased by altering
the Variable factors and fixed costs will remain constant.
)
(a) Long run
(c) Short run
(b) Mid term

(d) Market period
19. The total supply of a good is produced by a single private person or

Firm is called as________.
)
(a) Government Monopoly
(c) Private Monopoly
(b) Legal Monopoly

(d) Natural Monopoly

103
kumaraswamireddy
20. In perfect competition market, seller is the _________.

)
(a) Price Maker
(c) Price Taker
Mighty mech
(b) Price changer

(d) Price Dictator
21. Charging Very Low price in the beginning and increasing it gradually
is called ________
)
(a) Differential pricing
(b) Sealed bid Pricing
(c) Penetration Pricing
(d) Skimming Pricing
22. If Average Revenue is less than the Average Cost, Monopoly

secures __.
)
(a) Profits
(b) Abnormal Profits
(c) Losses
(d) Super Profits
23. In Monopoly market environment, seller is the __________.
)
(a) Price - Taker
(b) Price - Accepter
(c) Price - Maker
(d) None

104
kumaraswamireddy
Mighty mech
UNIT - V
BUSINESS AND NEW ECONOMIC ENVIRONMENT
Imagine you want to do business. Which are you interested in? For example,
you want to get into InfoTech industry. What can you do in this industry?
Which one do you choose? The following are the alternatives you have on
hand:
You can bye and sell
You can set up a small/medium/large industry to manufacture
You can set up a workshop to repair
You can develop software
You can design hardware
You can be a consultant/trouble-shooter
If you choose any one or more of the above, you have chosen the line of
activity. The next step for you is to decide whether.
You want to be only owner (It means you what to be sole trader) or
You want to take some more professionals as co-owners along with

you (If means you what to from partnership with others as partners) or
You want to be a global player by mobilizing large resources across the

country/world
You want to bring all like-minded people to share the benefits of the
common enterprise (You want to promote a joint stock company) or
You want to involve government in the IT business (here you want to

suggest government to promote a public enterprise!)
To decide this, it is necessary to know how to evaluate each of these

alternatives.
Factors affecting the choice of form of business organization

Before we choose a particular form of business organization, let us study what
factors affect such a choice? The following are the factors affecting the choice
of a business organization:
1. Easy to start and easy to close: The form of business organization
should be such that it should be easy to close. There should not be

hassles or long procedures in the process of setting up business or
closing the same.
2. Division of labour: There should be possibility to divide the work
among the available owners.

105
kumaraswamireddy
Mighty mech
3. Large amount of resources: Large volume of business requires large
volume of resources. Some forms of business organization do not

permit to raise larger resources. Select the one which permits to
mobilize the large resources.
4. Liability: The liability of the owners should be limited to the extent of
money invested in business. It is better if their personal properties are

not brought into business to make up the losses of the business.
5. Secrecy: The form of business organization you select should be such
that it should permit to take care of the business secrets. We know

that century old business units are still surviving only because they
could successfully guard their business secrets.
6. Transfer of ownership: There should be simple procedures to
transfer the ownership to the next legal heir.

7. Ownership, Management and control: If ownership, management
and control are in the hands of one or a small group of persons,

communication will be effective and coordination will be easier. Where
ownership, management and control are widely distributed, it calls for
a high degree of professionals skills to monitor the performance of the
business.
8. Continuity:
The
business
should
continue
forever
and
ever
irrespective of the uncertainties in future.

9. Quick decision-making: Select such a form of business organization,
which permits you to take decisions quickly and promptly. Delay in

decisions may invalidate the relevance of the decisions.
10.Personal contact with customer: Most of the times, customers give
us clues to improve business. So choose such a form, which keeps you

close to the customers.
11.Flexibility: In times of rough weather, there should be enough
flexibility to shift from one business to the other. The lesser the funds
committed in a particular business, the better it is.
12.Taxation:
More profit means more tax. Choose such a form, which
permits to pay low tax.

These are the parameters against which we can evaluate each of the available
forms of business organizations.
SOLE TRADER
The sole trader is the simplest, oldest and natural form of business
organization. It is also called sole proprietorship. Sole means one. Sole
trader implies that there is only one trader who is the owner of the business.

106
kumaraswamireddy
Mighty mech
It is a one-man form of organization wherein the trader assumes all the risk
of ownership carrying out the business with his own capital, skill and
intelligence. He is the boss for himself. He has total operational freedom. He
is the owner, Manager and controller. He has total freedom and flexibility. Full
control lies with him. He can take his own decisions. He can choose or drop a
particular product or business based on its merits. He need not discuss this
with anybody. He is responsible for himself. This form of organization is
popular all over the world. Restaurants, Supermarkets, pan shops, medical
shops, hosiery shops etc.
Features
It is easy to start a business under this form and also easy to close.
He introduces his own capital. Sometimes, he may borrow, if necessary
He enjoys all the profits and in case of loss, he lone suffers.
He has unlimited liability which implies that his liability extends to his
personal properties in case of loss.
He has a high degree of flexibility to shift from one business to the

other.
Business secretes can be guarded well
There is no continuity. The business comes to a close with the death,

illness or insanity of the sole trader. Unless, the legal heirs show
interest to continue the business, the business cannot be restored.
He has total operational freedom. He is the owner, manager and

controller.
He can be directly in touch with the customers.
He can take decisions very fast and implement them promptly.
Rates of tax, for example, income tax and so on are comparatively

very low.
Advantages
The following are the advantages of the sole trader from of business
organization:
1. Easy to start and easy to close: Formation of a sole trader from of
organization is relatively easy even closing the business is easy.
2. Personal contact with customers directly: Based on the tastes and
preferences of the customers the stocks can be maintained.
3. Prompt decision-making: To improve the quality of services to the
customers, he can take any decision and implement the same
promptly. He is the boss and he is responsible for his business
Decisions relating to growth or expansion can be made promptly.
107
kumaraswamireddy
Mighty mech
4. High degree of flexibility: Based on the profitability, the trader can

decide to continue or change the business, if need be.
5. Secrecy: Business secrets can well be maintained because there is
only one trader.
6. Low rate of taxation: The rate of income tax for sole traders is
relatively very low.
7. Direct motivation: If there are profits, all the profits belong to the
trader himself. In other words. If he works more hard, he will get more
profits. This is the direct motivating factor. At the same time, if he
does not take active interest, he may stand to lose badly also.
8. Total Control: The ownership, management and control are in the
hands of the sole trader and hence it is easy to maintain the hold on
business.
9. Minimum interference from government:
Except
in
matters
relating to public interest, government does not interfere in the

business matters of the sole trader. The sole trader is free to fix price
for his products/services if he enjoys monopoly market.
10. Transferability: The legal heirs of the sole trader may take the
possession of the business.
Disadvantages
The following are the disadvantages of sole trader form:
1. Unlimited liability: The liability of the sole trader is unlimited. It
means that the sole trader has to bring his personal property to clear
off the loans of his business. From the legal point of view, he is not
different from his business.
2. Limited amounts of capital: The resources a sole trader can mobilize
cannot be very large and hence this naturally sets a limit for the scale
of operations.
3. No division of labour: All the work related to different functions such
as marketing, production, finance, labour and so on has to be taken
care of by the sole trader himself. There is nobody else to take his
burden. Family members and relatives cannot show as much interest
as the trader takes.
4. Uncertainty: There is no continuity in the duration of the business. On
the death, insanity of insolvency the business may be come to an end.
5. Inadequate for growth and expansion: This from is suitable for
only small size, one-man-show type of organizations. This may not
really work out for growing and expanding organizations.

108
6. Lack
of
kumaraswamireddy
specialization:
The
services
Mighty mech
of
specialists
such
as
accountants, market researchers, consultants and so on, are not within

the reach of most of the sole traders.
7. More competition: Because it is easy to set up a small business,
there is a high degree of competition among the small businessmen
and a few who are good in taking care of customer requirements along
can service.
8. Low bargaining power: The sole trader is the in the receiving end in
terms of loans or supply of raw materials. He may have to compromise
many times regarding the terms and conditions of purchase of
materials or borrowing loans from the finance houses or banks.
PARTNERSHIP
Partnership is an improved from of sole trader in certain respects. Where
there are like-minded persons with resources, they can come together to do
the business and share the profits/losses of the business in an agreed ratio.
Persons who have entered into such an agreement are individually called
partners and collectively called firm. The relationship among partners is
called a partnership.
Indian Partnership Act, 1932 defines partnership as the relationship between
two or more persons who agree to share the profits of the business carried on
by all or any one of them acting for all.
Features
1. Relationship: Partnership is a relationship among persons. It is
relationship resulting out of an agreement.
2. Two or more persons: There should be two or more number of
persons.
3. There should be a business: Business should be conducted.
4. Agreement: Persons should agree to share the profits/losses of the
business
5. Carried on by all or any one of them acting for all: The business
can be carried on by all or any one of the persons acting for all. This
means that the business can be carried on by one person who is the
agent for all other persons. Every partner is both an agent and a
principal. Agent for other partners and principal for himself. All the
partners are agents and the partnership is their principal.
The following are the other features:

109
kumaraswamireddy
Mighty mech
(a) Unlimited liability: The liability of the partners is unlimited. The

partnership and partners, in the eye of law, and not different but one
and the same. Hence, the partners have to bring their personal assets
to clear the losses of the firm, if any.
(b) Number of partners: According to the Indian Partnership Act, the
minimum number of partners should be two and the maximum
number if restricted, as given below:
10 partners is case of banking business
20 in case of non-banking business
(c) Division of labour: Because there are more than two persons, the
work can be divided among the partners based on their aptitude.
(d) Personal contact with customers: The partners can continuously
be in touch with the customers to monitor their requirements.
(e) Flexibility: All the partners are likeminded persons and hence they
can take any decision relating to business.
Partnership Deed
The written agreement among the partners is called the partnership deed. It
contains the terms and conditions governing the working of partnership. The
following are contents of the partnership deed.
1. Names and addresses of the firm and partners
2. Nature of the business proposed
3. Duration
4. Amount of capital of the partnership and the ratio for contribution by
each of the partners.
5. Their profit sharing ration (this is used for sharing losses also)
6. Rate of interest charged on capital contributed, loans taken from the
partnership and the amounts drawn, if any, by the partners from their
respective capital balances.
7. The amount of salary or commission payable to any partner
8. Procedure to value good will of the firm at the time of admission of a
new partner, retirement of death of a partner
9. Allocation of responsibilities of the partners in the firm
10. Procedure for dissolution of the firm
11. Name of the arbitrator to whom the disputes, if any, can be referred to
for settlement.
12. Special rights, obligations and liabilities of partners(s), if any.
KIND OF PARTNERS
The following are the different kinds of partners:
110
kumaraswamireddy
Mighty mech
1. Active Partner: Active partner takes active part in the affairs of the
partnership. He is also called working partner.
2. Sleeping Partner: Sleeping partner contributes to capital but does
not take part in the affairs of the partnership.
3. Nominal Partner: Nominal partner is partner just for namesake. He
neither contributes to capital nor takes part in the affairs of business.
Normally, the nominal partners are those who have good business
connections, and are well places in the society.
4. Partner by Estoppels: Estoppels means behavior or conduct. Partner
by estoppels gives an impression to outsiders that he is the partner in
the firm. In fact be neither contributes to capital, nor takes any role in
the affairs of the partnership.
5. Partner by holding out: If partners declare a particular person
(having social status) as partner and this person does not contradict
even after he comes to know such declaration, he is called a partner by
holding out and he is liable for the claims of third parties. However, the
third parties should prove they entered into contract with the firm in
the belief that he is the partner of the firm. Such a person is called
partner by holding out.
6. Minor Partner: Minor has a special status in the partnership. A minor
can be admitted for the benefits of the firm. A minor is entitled to his
share of profits of the firm. The liability of a minor partner is limited to
the extent of his contribution of the capital of the firm.
Right of partners
Every partner has right
(a) To take part in the management of business
(b) To express his opinion
(c) Of access to and inspect and copy and book of accounts of the firm
(d) To share equally the profits of the firm in the absence of any specific
agreement to the contrary
(e) To receive interest on capital at an agreed rate of interest from the
profits of the firm
(f) To receive interest on loans, if any, extended to the firm.
(g) To be indemnified for any loss incurred by him in the conduct of the
business
(h) To receive any money spent by him in the ordinary and proper conduct
of the business of the firm.

111
kumaraswamireddy
Mighty mech
Advantages
The following are the advantages of the partnership from:
1. Easy to form: Once there is a group of like-minded persons and good
business proposal, it is easy to start and register a partnership.
2. Availability of larger amount of capital: More amount of capital can
be raised from more number of partners.
3. Division
of
labour:
The
different
partners
come
with
varied
backgrounds and skills. This facilities division of labour.

4. Flexibility: The partners are free to change their decisions, add or
drop a particular product or start a new business or close the present
one and so on.
5. Personal contact with customers: There is scope to keep close
monitoring with customers requirements by keeping one of the
partners in charge of sales and marketing. Necessary changes can be
initiated based on the merits of the proposals from the customers.
6. Quick decisions and prompt action: If there is consensus among
partners, it is enough to implement any decision and initiate prompt
action. Sometimes, it may more time for the partners on strategic
issues to reach consensus.
7. The positive impact of unlimited liability: Every partner is always
alert about his impending danger of unlimited liability. Hence he tries
to do his best to bring profits for the partnership firm by making good
use of all his contacts.
Disadvantages:
The following are the disadvantages of partnership:
1. Formation of partnership is difficult: Only like-minded persons can
start a partnership. It is sarcastically said, it is easy to find a life
partner, but not a business partner.
2. Liability: The partners have joint and several liabilities beside
unlimited liability. Joint and several liability puts additional burden on
the partners, which means that even the personal properties of the
partner or partners can be attached. Even when all but one partner
become insolvent, the solvent partner has to bear the entire burden of
business loss.

112
kumaraswamireddy
Mighty mech
3. Lack of harmony or cohesiveness: It is likely that partners may not,

most often work as a group with cohesiveness. This result in mutual
conflicts, an attitude of suspicion and crisis of confidence. Lack of
harmony results in delay in decisions and paralyses the entire
operations.
4. Limited growth: The resources when compared to sole trader, a
partnership may raise little more. But when compare to the other
forms such as a company, resources raised in this form of organization
are limited. Added to this, there is a restriction on the maximum
number of partners.
5. Instability: The partnership form is known for its instability. The firm
may be dissolved on death, insolvency or insanity of any of the
partners.
6. Lack of Public confidence: Public and even the financial institutions
look at the unregistered firm with a suspicious eye. Though registration
of the firm under the Indian Partnership Act is a solution of such
problem, this cannot revive public confidence into this form of
organization overnight. The partnership can create confidence in other
only with their performance.
JOINT STOCK COMPANY

The joint stock company emerges from the limitations of partnership such as
joint and several liability, unlimited liability, limited resources and uncertain
duration and so on. Normally, to take part in a business, it may need large
money and we cannot foretell the fate of business. It is not literally possible
to get into business with little money. Against this background, it is
interesting to study the functioning of a joint stock company. The main
principle of the joint stock company from is to provide opportunity to take
part in business with a low investment as possible say Rs.1000. Joint Stock
Company has been a boon for investors with moderate funds to invest.
The word company has a Latin origin, com means come together, pany
means bread, joint stock company means, people come together to earn
their livelihood by investing in the stock of company jointly.
Company Defined
Lord justice Lindley explained the concept of the joint stock company from of
organization as an association of many persons who contribute money or
moneys worth to a common stock and employ it for a common purpose.

113
kumaraswamireddy
Mighty mech
Features
This definition brings out the following features of the company:
1. Artificial person: The Company has no form or shape. It is an
artificial person created by law. It is intangible, invisible and existing
only, in the eyes of law.
2. Separate legal existence: it has an independence existence, it
separate from its members. It can acquire the assets. It can borrow for
the company. It can sue other if they are in default in payment of
dues, breach of contract with it, if any. Similarly, outsiders for any
claim can sue it. A shareholder is not liable for the acts of the
company. Similarly, the shareholders cannot bind the company by their
acts.
3. Voluntary association of persons: The Company is an association of
voluntary association of persons who want to carry on business for
profit. To carry on business, they need capital. So they invest in the
share capital of the company.
4. Limited Liability: The shareholders have limited liability i.e., liability
limited to the face value of the shares held by him. In other words, the
liability of a shareholder is restricted to the extent of his contribution to
the share capital of the company. The shareholder need not pay
anything, even in times of loss for the company, other than his
contribution to the share capital.
5. Capital is divided into shares: The total capital is divided into a
certain number of units. Each unit is called a share. The price of each
share is priced so low that every investor would like to invest in the
company. The companies promoted by promoters of good standing
(i.e., known for their reputation in terms of reliability character and
dynamism) are likely to attract huge resources.
6. Transferability of shares: In the company form of organization, the
shares can be transferred from one person to the other. A shareholder
of a public company can cell sell his holding of shares at his will.
However, the shares of a private company cannot be transferred. A
private company restricts the transferability of the shares.
7. Common Seal: As the company is an artificial person created by law
has no physical form, it cannot sign its name on a paper; so, it has a
common seal on which its name is engraved. The common seal should
affix every document or contract; otherwise the company is not bound
by such a document or contract.
8. Perpetual succession: Members may comes and members may go,
but the company continues for ever and ever A. company has

114
kumaraswamireddy
Mighty mech
uninterrupted existence because of the right given to the shareholders

to transfer the shares.
9. Ownership and Management separated: The shareholders are
spread over the length and breadth of the country, and sometimes,
they are from different parts of the world. To facilitate administration,
the shareholders elect some among themselves or the promoters of
the company as
directors
to a
Board, which
looks
after the
management of the business. The Board recruits the managers and

employees
at
different
levels
in
the
management.
Thus
the
management is separated from the owners.

10. Winding up: Winding up refers to the putting an end to the company.
Because law creates it, only law can put an end to it in special
circumstances such as representation from creditors of financial
institutions, or shareholders against the company that their interests
are not safeguarded. The company is not affected by the death or
insolvency of any of its members.
11. The name of the company ends with limited: it is necessary that
the name of the company ends with limited (Ltd.) to give an indication
to the outsiders that they are dealing with the company with limited
liability and they should be careful about the liability aspect of their
transactions with the company.
Formation of Joint Stock company

There are two stages in the formation of a joint stock company. They are:
(a) To obtain Certificates of Incorporation
(b) To obtain certificate of commencement of Business
Certificate of Incorporation: The certificate of Incorporation is just like a
date of birth certificate. It certifies that a company with such and such a
name is born on a particular day.
Certificate of commencement of Business: A private company need not
obtain the certificate of commencement of business. It can start its

commercial
operations
immediately
after
obtaining
the
certificate
of
Incorporation.
The persons who conceive the idea of starting a company and who organize
the necessary initial resources are called promoters. The vision of the
promoters forms the backbone for the company in the future to reckon with.
The promoters have to file the following documents, along with necessary fee,
with a registrar of joint stock companies to obtain certificate of incorporation:
115
kumaraswamireddy
Mighty mech
(a) Memorandum of Association: The Memorandum of Association is

also called the charter of the company. It outlines the relations of the
company with the outsiders. If furnishes all its details in six clause
such as (ii) Name clause (II) situation clause (iii) objects clause (iv)
Capital clause and (vi) subscription clause duly executed by its
subscribers.
(b) Articles of association: Articles of Association furnishes the byelaws
or internal rules government the internal conduct of the company.
(c) The list of names and address of the proposed directors and their
willingness, in writing to act as such, in case of registration of a public
company.
(d) A statutory declaration that all the legal requirements have been
fulfilled. The declaration has to be duly signed by any one of the
following: Company secretary in whole practice, the proposed director,
legal solicitor, chartered accountant in whole time practice or advocate
of High court.
The registrar of joint stock companies peruses and verifies whether all these
documents are in order or not. If he is satisfied with the information
furnished, he will register the documents and then issue a certificate of
incorporation, if it is private company, it can start its business operation
immediately after obtaining certificate of incorporation.
Advantages
The following are the advantages of a joint Stock Company
1. Mobilization of larger resources: A joint stock company provides
opportunity for the investors to invest, even small sums, in the capital
of large companies. The facilities rising of larger resources.
2. Separate legal entity: The Company has separate legal entity. It is
registered under Indian Companies Act, 1956.
3. Limited liability: The shareholder has limited liability in respect of the
shares held by him. In no case, does his liability exceed more than the
face value of the shares allotted to him.
4. Transferability of shares: The shares can be transferred to others.
However, the private company shares cannot be transferred.
5. Liquidity of investments: By providing the transferability of shares,
shares can be converted into cash.
6. Inculcates the habit of savings and investments: Because the
share face value is very low, this promotes the habit of saving among
116
kumaraswamireddy
Mighty mech
the common man and mobilizes the same towards investments in the
company.
7. Democracy in management: the shareholders elect the directors in
a democratic way in the general body meetings. The shareholders are
free to make any proposals, question the practice of the management,
suggest the possible remedial measures, as they perceive, The
directors respond to the issue raised by the shareholders and have to
justify their actions.
8. Economics of large scale production: Since the production is in the
scale with large funds at
9. Continued existence: The Company has perpetual succession. It has
no natural end. It continues forever and ever unless law put an end to
it.
10. Institutional confidence: Financial Institutions prefer to deal with
companies in view of their professionalism and financial strengths.
11. Professional management: With the larger funds at its disposal, the
Board of Directors recruits competent and professional managers to
handle the affairs of the company in a professional manner.
12. Growth and Expansion: With large resources and professional
management, the company can earn good returns on its operations,
build good amount of reserves and further consider the proposals for
growth and expansion.
All that shines is not gold. The company from of organization is not without
any disadvantages. The following are the disadvantages of joint stock
companies.
Disadvantages
1. Formation of company is a long drawn procedure: Promoting a
joint stock company involves a long drawn procedure. It is expensive
and involves large number of legal formalities.
2. High degree of government interference: The government brings
out a number of rules and regulations governing the internal conduct
of the operations of a company such as meetings, voting, audit and so
on, and any violation of these rules results into statutory lapses,
punishable under the companies act.
3. Inordinate
delays
in
decision-making:
As
the
size
of
the
organization grows, the number of levels in organization also increases

in the name of specialization. The more the number of levels, the more
is the delay in decision-making. Sometimes, so-called professionals do

117
kumaraswamireddy
Mighty mech
not respond to the urgencies as required. It promotes delay in

administration, which is referred to red tape and bureaucracy.
4. Lack or initiative: In most of the cases, the employees of the
company at different levels show slack in their personal initiative with
the result, the opportunities once missed do not recur and the
company loses the revenue.
5. Lack of responsibility and commitment: In some cases, the
managers at different levels are afraid to take risk and more worried
about their jobs rather than the huge funds invested in the capital of
the company lose the revenue.
6. Lack of responsibility and commitment: In some cases, the
managers at different levels are afraid to take risk and more worried
about their jobs rather than the huge funds invested in the capital of
the company. Where managers do not show up willingness to take
responsibility, they cannot be considered as committed. They will not
be able to handle the business risks.
PUBLIC ENTERPRISES
Public enterprises occupy an important position in the Indian economy.
Today, public enterprises provide the substance and heart of the economy. Its
investment of over Rs.10,000 crore is in heavy and basic industry, and
infrastructure like power, transport and communications. The concept of
public enterprise in Indian dates back to the era of pre-independence.
Genesis of Public Enterprises

In consequence to declaration of its goal as socialistic pattern of society in
1954, the Government of India realized that it is through progressive
extension of public enterprises only, the following aims of our five years plans
can be fulfilled.
Higher production
Greater employment
Economic equality, and
Dispersal of economic power
The government found it necessary to revise its industrial policy in 1956 to

give it a socialistic bent.

118
kumaraswamireddy
Mighty mech
Need for Public Enterprises

The Industrial Policy Resolution 1956 states the need for promoting public
enterprises as follows:
To accelerate the rate of economic growth by planned development
To speed up industrialization, particularly development of heavy

industries and to expand public sector and to build up a large and
growing cooperative sector.
To increase infrastructure facilities
To disperse the industries over different geographical areas for

balanced regional development
To increase the opportunities of gainful employment
To help in raising the standards of living
To reducing disparities in income and wealth (By preventing private

monopolies and curbing concentration of economic power and vast
industries in the hands of a small number of individuals)
Achievements of public Enterprises

The achievements of public enterprise are vast and varied. They are:
1. Setting up a number of public enterprises in basic and key industries
2. Generating considerably large employment opportunities in skilled,
unskilled, supervisory and managerial cadres.
3. Creating
internal
resources
and
contributing
towards
national
exchequer for funds for development and welfare.

4. Bringing about development activities in backward regions, through
locations in different areas of the country.
5. Assisting in the field of export promotion and conservation of foreign
exchange.
6. Creating viable infrastructure and bringing about rapid industrialization
(ancillary industries developed around the public sector as its nucleus).
7. Restricting the growth of private monopolies
8. Stimulating diversified growth in private sector
9. Taking over sick industrial units and putting them, in most of the
vases, in order,
10. Creating financial systems, through a powerful networking of financial
institutions, development and promotional institutions, which has
resulted in social control and social orientation of investment, credit
and capital management systems.

119
kumaraswamireddy
Mighty mech
11. Benefiting the rural areas, priority sectors, small business in the fields
of industry, finance, credit, services, trade, transport, consultancy and
so on.
Let us see the different forms of public enterprise and their features now.
Forms of public enterprises

Public enterprises can be classified into three forms:
(a) Departmental undertaking
(b) Public corporation
(c) Government company
These are explained below
Departmental Undertaking
This is the earliest from of public enterprise. Under this form, the affairs of
the public enterprise are carried out under the overall control of one of the
departments of the government. The government department appoints a
managing
director
(normally
civil
servant)
for
the
departmental
undertaking. He will be given the executive authority to take necessary

decisions. The departmental undertaking does not have a budget of its own.
As and when it wants, it draws money from the government exchequer and
when it has surplus money, it deposits it in the government exchequer.
However, it is subject to budget, accounting and audit controls.
Examples for departmental undertakings are Railways, Department of Posts,
All India Radio, Doordarshan, Defence undertakings like DRDL, DLRL,
ordinance factories, and such.
Features
1. Under the control of a government department: The departmental
undertaking is not an independent organization. It has no separate
existence. It is designed to work under close control of a government
department. It is subject to direct ministerial control.
2. More financial freedom: The departmental undertaking can draw
funds from government account as per the needs and deposit back
when convenient.
3. Like
any
other
government
department:
The
departmental
undertaking is almost similar to any other government department

120
4. Budget,
kumaraswamireddy
accounting
and
audit
Mighty mech
controls:
The
departmental
undertaking has to follow guidelines (as applicable to the other

government
departments)
underlying
the
budget
preparation,
maintenance of accounts, and getting the accounts audited internally

and by external auditors.
5. More a government organization, less a business organization . The
set up of a departmental undertaking is more rigid, less flexible, slow
in responding to market needs.
Advantages
1. Effective control: Control is likely to be effective because it is directly
under the Ministry.
2. Responsible Executives: Normally the administration is entrusted to a
senior civil servant. The administration will be organized and effective.
3. Less scope for mystification of funds: Departmental undertaking
does not draw any money more than is needed, that too subject to
ministerial sanction and other controls. So chances for mis-utilisation
are low.
4. Adds to Government revenue: The revenue of the government is on
the rise when the revenue of the departmental undertaking is
deposited in the government account.
Disadvantages
1. Decisions delayed: Control is centralized. This results in lower degree
of flexibility. Officials in the lower levels cannot take initiative.
Decisions cannot be fast and actions cannot be prompt.
2. No incentive to maximize earnings: The departmental undertaking
does not retain any surplus with it. So there is no inventive for
maximizing the efficiency or earnings.
3. Slow response to market conditions: Since there is no competition,
there is no profit motive; there is no incentive to move swiftly to
market needs.
4. Redtapism and bureaucracy: The departmental undertakings are in
the control of a civil servant and under the immediate supervision of a
government department. Administration gets delayed substantially.
5. Incidence of more taxes: At times, in case of losses, these are made
up by the government funds only. To make up these, there may be a
need for fresh taxes, which is undesirable.
121
kumaraswamireddy
Mighty mech
Any business organization to be more successful needs to be more dynamic,

flexible, and responsive to market conditions, fast in decision marking and
prompt in actions. None of these qualities figure in the features of a
departmental undertaking. It is true that departmental undertaking operates
as a extension to the government. With the result, the government may miss
certain business opportunities. So as not to miss business opportunities, the
government has thought of another form of public enterprise, that is, Public
corporation.
PUBLIC CORPORATION
Having released that the routing government administration would not be
able to cope up with the demand of its business enterprises, the Government
of India, in 1948, decided to organize some of its enterprises as statutory
corporations. In pursuance of this, Industrial Finance Corporation, Employees
State Insurance Corporation was set up in 1948.
Public corporation is a right mix of public ownership, public accountability and
business management for public ends. The public corporation provides
machinery, which is flexible, while at the same time retaining public control.
Definition
A public corporation is defined as a body corporate create by an Act of
Parliament or Legislature and notified by the name in the official gazette of
the central or state government. It is a corporate entity having perpetual
succession, and common seal with power to acquire, hold, dispose off
property, sue and be sued by its name.
Examples of a public corporation are Life Insurance Corporation of India, Unit
Trust of India, Industrial Finance Corporation of India, Damodar Valley
Corporation and others.
Features
1. A body corporate: It has a separate legal existence. It is a separate
company by itself. If can raise resources, buy and sell properties, by
name sue and be sued.
2. More freedom and day-to-day affairs: It is relatively free from any
type of political interference. It enjoys administrative autonomy.
3. Freedom regarding personnel: The employees of public corporation
are not government civil servants. The corporation has absolute
122
kumaraswamireddy
Mighty mech
freedom to formulate its own personnel policies and procedures, and

these are applicable to all the employees including directors.
4. Perpetual succession: A statute in parliament or state legislature
creates it. It continues forever and till a statue is passed to wind it up.
5. Financial autonomy: Through the public corporation is fully owned
government organization, and the initial finance are provided by the
Government, it enjoys total financial autonomy, Its income and
expenditure are not shown in the annual budget of the government, it
enjoys total financial autonomy. Its income and expenditure are not
shown in the annual budget of the government. However, for its
freedom it is restricted regarding capital expenditure beyond the laid
down limits, and raising the capital through capital market.
6. Commercial audit: Except in the case of banks and other financial
institutions
where
chartered
accountants
are
auditors,
in
all
corporations, the audit is entrusted to the comptroller and auditor

general of India.
7. Run on commercial principles: As far as the discharge of functions,
the corporation shall act as far as possible on sound business
principles.
Advantages
1. Independence, initiative and flexibility: The corporation has an
autonomous set up. So it is independent, take necessary initiative to
realize its goals, and it can be flexible in its decisions as required.
2. Scope for Redtapism and bureaucracy minimized: The Corporation
has its own policies and procedures. If necessary they can be simplified
to eliminate redtapism and bureaucracy, if any.
3. Public interest protected: The corporation can protect the public
interest by making its policies more public friendly, Public interests are
protected because every policy of the corporation is subject to
ministerial directives and board parliamentary control.
4. Employee friendly work environment: Corporation can design its
own work culture and train its employees accordingly. It can provide
better amenities and better terms of service to the employees and
thereby secure greater productivity.
5. Competitive prices: the corporation is a government organization and
hence can afford with minimum margins of profit, It can offer its
products and services at competitive prices.
6. Economics of scale: By increasing the size of its operations, it can
achieve economics of large-scale production.
7. Public
accountability:
It
is
accountable
to
the
Parliament
legislature; it has to submit its annual report on its working results.

123
or
kumaraswamireddy
Mighty mech
Disadvantages
1. Continued political interference: the autonomy is on paper only and
in reality, the continued.
2. Misuse of Power: In some cases, the greater autonomy leads to
misuse of power. It takes time to unearth the impact of such misuse
on the resources of the corporation. Cases of misuse of power defeat
the very purpose of the public corporation.
3. Burden for the government: Where the public corporation ignores the
commercial principles and suffers losses, it is burdensome for the
government to provide subsidies to make up the losses.
Government Company
Section 617 of the Indian Companies Act defines a government company as
any company in which not less than 51 percent of the paid up share capital
is held by the Central Government or by any State Government or
Governments or partly by Central Government and partly by one or more of
the state Governments and includes and company which is subsidiary of
government company as thus defined.
A government company is the right combination of operating flexibility of
privately organized companies with the advantages of state regulation and
control in public interest.
Government companies differ in the degree of control and their motive also.
Some government companies are promoted as
industrial undertakings (such as Hindustan Machine Tools, Indian

Telephone Industries, and so on)
Promotional
agencies
(such
as
National
Industrial
Development
Corporation, National Small Industries Corporation, and so on) to

prepare feasibility reports for promoters who want to set up public or
private companies.
Agency to promote trade or commerce. For example, state trading

corporation, Export Credit Guarantee Corporation and so such like.
A company to take over the existing sick companies under private

management (E.g. Hindustan Shipyard)
A company established as a totally state enterprise to safeguard

national interests such as Hindustan Aeronautics Ltd. And so on.

124
kumaraswamireddy
Mighty mech
Mixed ownership company in collaboration with a private consult to

obtain technical know how and guidance for the management of its
enterprises, e.g. Hindustan Cables)
Features
The following are the features of a government company:
1. Like any other registered company: It is incorporated as a registered
company under the Indian companies Act. 1956. Like any other
company, the government company has separate legal existence.
Common seal, perpetual succession, limited liability, and so on. The
provisions of the Indian Companies Act apply for all matters relating to
formation, administration and winding up. However, the government
has a right to exempt the application of any provisions of the
government companies.
2. Shareholding: The majority of the share are held by the Government,
Central or State, partly by the Central and State Government(s), in the
name of the President of India, It is also common that the
collaborators and allotted some shares for providing the transfer of
technology.
3. Directors are nominated: As the government is the owner of the
entire or majority of the share capital of the company, it has freedom
to nominate the directors to the Board. Government may consider the
requirements of the company in terms of necessary specialization and
appoints the directors accordingly.
4. Administrative autonomy and financial freedom: A government
company functions independently with full discretion and in the normal
administration of affairs of the undertaking.
5. Subject to ministerial control: Concerned minister may act as the
immediate boss. It is because it is the government that nominates the
directors, the minister issue directions for a company and he can call
for information related to the progress and affairs of the company any
time.
Advantages
1. Formation is easy: There is no need for an Act in legislature or
parliament
to promote a
government company. A Government
company can be promoted as per the provisions of the companies Act.

Which is relatively easier?
2. Separate legal entity: It retains the advantages of public corporation
such as autonomy, legal entity.

125
kumaraswamireddy
Mighty mech
3. Ability to compete: It is free from the rigid rules and regulations. It

can smoothly function with all the necessary initiative and drive
necessary to complete with any other private organization. It retains
its independence in respect of large financial resources, recruitment of
personnel, management of its affairs, and so on.
4. Flexibility:
Government
company
is
more
flexible
than
departmental undertaking or public corporation. Necessary changes

can
be
initiated,
which
the
framework
of
the
company
law.
Government can, if necessary, change the provisions of the Companies

Act. If found restricting the freedom of the government company. The
form of Government Company is so flexible that it can be used for
taking over sick units promoting strategic industries in the context of
national security and interest.
5. Quick decision and prompt actions: In view of the autonomy, the
government company take decision quickly and ensure that the actions
and initiated promptly.
6. Private participation facilitated: Government company is the only
from providing scope for private participation in the ownership. The
facilities to take the best, necessary to conduct the affairs of business,
from the private sector and also from the public sector.
Disadvantages
1. Continued political and government interference: Government
seldom leaves the government company to function on its own.
Government is the major shareholder and it dictates its decisions to
the Board. The Board of Directors gets these approved in the general
body. There were a number of cases where the operational polices
were influenced by the whims and fancies of the civil servants and the
ministers.
2. Higher degree of government control: The degree of government
control is so high that the government company is reduced to mere
adjuncts to the ministry and is, in majority of the cases, not treated
better than the subordinate organization or offices of the government.
3. Evades constitutional responsibility: A government company is
creating by executive action of the government without the specific
approval of the parliament or Legislature.
4. Poor sense of attachment or commitment: The members of the
Board of Management of government companies and from the
ministerial departments in their ex-officio capacity. The lack the sense
of attachment and do not reflect any degree of commitment to lead the
company in a competitive environment.

126
kumaraswamireddy
Mighty mech
5. Divided loyalties: The employees are mostly drawn from the regular
government departments for a defined period. After this period, they
go back to their government departments and hence their divided
loyalty dilutes their interest towards their job in the government
company.
6. Flexibility on paper: The powers of the directors are to be approved
by the concerned Ministry, particularly the power relating to borrowing,
increase in the capital, appointment of top officials, entering into
contracts for large orders and restrictions on capital expenditure. The
government companies are rarely allowed to exercise their flexibility
and independence.
QUESTIONS
1. Define a joint stock company & explain its basic features, advantages
& disadvantages
2. Write short notes pm (a) Sole trader (b) Stationery corporation.
3. Explain in basic features of Government Company from of public
enterprise.
4. What do you mean by sole proprietorship? Explain its meant and
limitations.
5. Define partnership from of business. Explain its salient features.
6. What are the factors governing choice of form of business organization.
7. Write short notes on (a) public company (b) Government Company (c)
Private Company
8. What is the need of public enterprises? Explain the recent achievement
of public enterprises
9. What is a partnership deed? Discuss the main contents partnership
deed.
10. Write short note on (a) Departmental undertaking (b) articles of
association
11. Small is beautiful. Do you think, this is the reason for the survival of
the sole trader from of business organization? Support your answer
with suitable examples.
QUIZ
1. A Partnership firm can be formed with a minimum of Two Partners
and it can have a maximum of _______ Partners .
)
(a) 50
(b) 40
(c) 20
(d) 30
2. People may come and people may leave, but I go on forever is
Applicable to ______ Business organization.
)
127
kumaraswamireddy
(a) Sole proprietorship

(c) Company
Mighty mech
(b) Partnership
(d) Joint Hindu Family
3. ______ is Supreme Authority for Company Organization.

)
(a) Directors
(b) Debenture holders
(c) Share holders
(d) Creditors
4. One man one vote Principle is adopted in ______.

)
(a) Partnership firms
(b) Company
(c) Co-operative enterprises
(d) Hindu family business
5. The management of Joint Hindu Family business vests in the

eldest member of the family, called _____.
)
(a) Director
(b) Grand father
(c) Kartha
(d) Manager
6. Minimum Two and maximum ____ members are permitted in

Private limited company.
)
(a) Un-limited
(b) 20
(c) 50
(d) 10
7. Minimum ___ and maximum ____ members are permitted in

Public limited company.
)
(a) 50 ; Un-limited
(c) 7 ; Un-limited
(b) 20 ; 50
(d) 7 ; 50
8. Liability of sole proprietor is _______________.

)
(a) Limited
(b) Minimum
(c) Un-limited
(d) None
9. Liability of Shareholder _______________.

)
(a) Un-limited
(b) Maximum
(c) Limited to the share capital
(d) None
10. Certificate of commencement of business should be obtained by ___

)
company to start its functions.

(a) Private
(c) Public
(
(b) Statutory
(d) Chartered
11. Company operates in more than one Country is called as _____.

)
(a) Private company
(b) Government company
128
kumaraswamireddy
(c) Multinational company
(d) Indian company
12. ____ is not required to private company to start its functions.

)
(a) Certificate of incorporation
(b) Registration
(c) Certificate of commencement of business (d) None
13. ____ partner can enjoy profits but no liability for losses.
)
(a) Active
(b) Sleeping
(c) Minor
(d) Nominal
14. In public sector units ownership is in the hands of _____.

)
(a) Private persons
(c) Government
Mighty mech
(b) Public
(d) None
15. Promoting balanced regional development is one of the objectives

of _______ units
)
(a) Private sector
(b) Joint sector
(c) Public sector
(d) None
16. If either state government of central government or both have got not
less than 51% of share in the organization. Then that is called____.
(
)
(a) Private organization
(b) Partnership organization
(c) Government organization
(d) Joint sector organization

129
kumaraswamireddy
Mighty mech
UNIT- VI
CAPITAL AND CAPITAL BUDGETING
Introduction
Finance is the prerequisite to commence and vary on business. It is rightly
said to be the lifeblood of the business. No growth and expansion of
business can take place without sufficient finance. It shows that no
business activity is possible without finance. This is why; every business
has to make plans regarding acquisition and utilization of funds.
However efficient a firm may be in terms of production as well as
marketing if it ignores the proper management of flow of funds it certainly
lands in financial crunch and the very survival of the firm would be at a
stake.
Function of finance
According to B. O. Wheeler, Financial Management is concerned with the
acquisition and utiliasation of capital funds in meeting the financial needs
and overall objectives of a business enterprise. Thus the primary function
of finance is to acquire capital funds and put them for proper utilization,
with which the firms objectives are fulfilled. The firm should be able to
procure sufficient funds on reasonable terms and conditions and should
exercise proper control in applying them in order to earn a good rate of
return, which in turn allows the firm to reward the sources of funds
reasonably, and leaves the firm with good surplus to grow further. These
activities viz. financing, investing and dividend payment are not sequential
they are performed simultaneously and continuously. Thus, the Financial
Management can be broken down in to three major decisions or functions
of finance. They are: (i) the investment decision, (ii) the financing decision
and (iii) the dividend policy decision.
Investment Decision
The investment decision relates to the selection of assets in which funds
will be invested by a firm. The assets as per their duration of benefits, can
be categorized into two groups: (i) long-term assets which yield a return
over a period of time in future (ii) short-term or current assents which in
the normal course of business are convertible into cash usually with in a
year. Accordingly, the asset selection decision of a firm is of two types.

130
kumaraswamireddy
Mighty mech
The investment in long-term assets is popularly known as capital

budgeting and in short-term assets, working capital management.
1. Capital budgeting: Capital budgeting the long term investment

decision is probably the most crucial financial decision of a firm. It
relates to the selection of an assent or investment proposal or course
of action that benefits are likely to be available in future over the
lifetime of the project.
The long-term investment may relate to acquisition of new asset or
replacement of old assets. Whether an asset will be accepted or not
will depend upon the relative benefits and returns associated with it.
The measurement of the worth of the investment proposals is,
therefore, a major element in the capital budgeting exercise. The
second element of the capital budgeting decision is the analysis of risk
and uncertainty as the benefits from the investment proposals pertain
the future, which is uncertain. They have to be estimated under
various assumptions and thus there is an element of risk involved in
the exercise. The return from the capital budgeting decision should,
therefore, be evaluated in relation to the risk associated with it.
The third and final element is the ascertainment of a certain norm or
standard against which the benefits are to be judged. The norm is
known by different names such as cut-off rate, hurdle rate, required
rate, minimum rate of return and so on. This standard is broadly
expressed in terms of the cost of capital is, thus, another major aspect
of the capital; budgeting decision. In brief, the main elements of the
capital budgeting decision
are:
(i) The total assets
and
their
composition (ii) The business risk complexion of the firm, and (iii)
concept and measurement of the cost of capital.
2. Working Capital Management: Working capital management is
concerned with the management of the current assets. As we know,
the short-term survival is a pre-requisite to long-term success. The
major thrust of working capital management is the trade-off between
profitability and risk (liquidity), which are inversely related to each
other. If a firm does not have adequate working capital it may not
have the ability to meet its current obligations and thus invite the risk
of bankrupt. One the other hand if the current assets are too large the
firm will be loosing the opportunity of making a good return and thus
may not serve the requirements of suppliers of funds. Thus, the
131
kumaraswamireddy
Mighty mech
profitability and liquidity are the two major dimensions of working

capital management. In addition, the individual current assets should
be efficiently managed so that neither inadequate nor unnecessary
funds are locked up.
Finance Decision
The second major decision involved in financial management is the
financing decision, which is concerned with the financing mix or capital
structure of leverage. The term capital structure refers to the combination
of debt (fixed interest sources of financing) and equity capital (variable
dividend securities/source of funds). The financing decision of a firm
relates to the choice of the proportion of these sources to finance the
investment requirements. A higher proportion of debt implies a higher
return to the shareholders and also the higher financial risk and vice
versa. A proper balance between debt and equity is a must to ensure a
trade off between risk and return to the shareholders. A capital structure
with a reasonable proportion of debt and equity capital is called the
optimum capital structure.
The second aspect of the financing decision is the determination of an

appropriate capital structure, which will result, is maximum return to the
shareholders and in turn maximizes the worth of the firm. Thus, the
financing decision covers two inter-related aspects: (a) capital structure
theory, and (b) capital structure decision.
Dividend Policy decision

The third major decision of financial management is relating to dividend
policy. The firm has two alternatives with regard to management of profits
of a firm. They can be either distributed to the shareholder in the form of
dividends or they can be retained in the business or even distribute some
portion and retain the remaining. The course of action to be followed is a
significant element in the dividend decision. The dividend pay out ratio i.
e. the proportion of net profits to be paid out to the shareholders should
be in tune with the investment opportunities available within the firm. The
second major aspect of the dividend decision is the study of factors
determining dividend policy of a firm in practice.
WORKING CAPITAL ANALYSIS

132
kumaraswamireddy
Mighty mech
Finance is required for two purpose viz. for it establishment and to carry out
the day-to-day operations of a business. Funds are required to purchase the
fixed assets such as plant, machinery, land, building, furniture, etc, on longterm basis. Investments in these assets represent that part of firms capital,
which is blocked on a permanent of fixed basis and is called fixed capital.
Funds are also needed for short-term purposes such as the purchase of raw
materials, payment of wages and other day-to-day expenses, etc. and these
funds are known as working capital. In simple words working capital refers
that part of the firms capital, which is required for financing short term or
current assets such as cash, marketable securities, debtors and inventories.
The investment in these current assets keeps revolving and being constantly
converted into cash and which in turn financed to acquire current assets. Thus
the working capital is also known as revolving or circulating capital or shortterm capital.
Concept of working capital

There are two concepts of working capital:
1. Gross working capital
2. Net working capital
Gross working capital:
In the broader sense, the term working capital refers to the gross working
capital. The notion of the gross working capital refers to the capital invested
in total current assets of the enterprise. Current assets are those assets,
which in the ordinary course of business, can be converted into cash within a
short period, normally one accounting year.
Examples of current assets:
1. Cash in hand and bank balance
2. Bills receivables or Accounts Receivables
3. Sundry Debtors (less provision for bad debts)
4. Short-term loans and advances.
5. Inventories of stocks, such as:
(a) Raw materials
(b) Work in process
(c) Stores and spares
(d) Finished goods
6. Temporary Investments of surplus funds.
133
kumaraswamireddy
Mighty mech
7. Prepaid Expenses
8. Accrued Incomes etc.
Net working capital:
In a narrow sense, the term working capital refers to the net working capital.
Networking capital represents the excess of current assets over current
liabilities.
Current liabilities are those liabilities, which are intend to be paid in the
ordinary course of business within a short period, normally one accounting
year out of the current assets or the income of the business. Net working
capital may be positive or negative. When the current assets exceed the
current liabilities net working capital is positive and the negative net working
capital results when the liabilities are more then the current assets.
Examples of current liabilities:
1. Bills payable
2. Sundry Creditors or Accounts Payable.
3. Accrued or Outstanding Expanses.
4. Short term loans, advances and deposits.
5. Dividends payable
6. Bank overdraft
7. Provision for taxation etc.
Classification or kinds of working capital

Working capital may be classified in two ways:
a. On the basis of concept.
b. On the basis of time permanency
On the basis of concept, working capital is classified as gross working
capital and net working capital is discussed earlier. This classification is
important from the point of view of the financial manager. On the basis of
time, working capital may be classified as:
1. Permanent or fixed working capital
2. Temporary of variable working capital
1. Permanent or fixed working capital: There is always a minimum
level of current assets, which is continuously required by the enterprise
to carry out its normal business operations and this minimum is known
134
kumaraswamireddy
Mighty mech
as permanent of fixed working capital. For example, every firm has to

maintain a minimum level of raw materials, work in process; finished
goods and cash balance to run the business operations smoothly and
profitably. This minimum level of current assets is permanently blocked
in current assets. As the business grows, the requirement of
permanent working capital also increases due to the increases in
current assets. The permanent working capital can further be classified
into regular working capital and reserve working capital. Regular
working capital is the minimum amount of working capital required to
ensure circulation of current assets from cash to inventories, from
inventories to receivables and from receivable to cash and so on.
Reserve working capital is the excess amount over the requirement for
regular working capital which may be provided for contingencies that
may arise at unstated period such as strikes, rise in prices, depression
etc.
2. Temporary or variable working capital: Temporary or variable
working capital is the amount of working capital, which is required to
meet the seasonal demands and some special exigencies. Thus the
variable working capital can be further classified into seasonal working
capital and special working capital. While seasonal working capital is
required to meet certain seasonal demands, the special working capital
is that part of working capital which is required to meet special
exigencies such as launching of extensive marketing campaigns, for
conducting research etc.
Temporary working capital differs from permanent working capital in
the sense that it is required for short periods and cannot be
permanently employed gainfully in the business. Figures given below
illustrate the different between permanent and temporary working
capital.
Importance of working capital

Working capital is refereed to be the lifeblood and nerve center of a business.
Working capital is as essential to maintain the smooth functioning of a
business as blood circulation in a human body. No business can run
successfully with out an adequate amount of working capital. The main
advantages of maintaining adequate amount of working capital are as follows:
1. Solvency of the business: Adequate working capital helps in
maintaining solvency of the business by providing uninterrupted
flow of production.

135
kumaraswamireddy
Mighty mech
2. Good will: Sufficient working capital enables a business concern

to make prompt payment and hence helps in creating and
maintaining good will.
3. Easy loans: A concern having adequate working capital, high
solvency and good credit standing can arrange loans from banks
and others on easy and favorable terms.
4. Cash Discounts: Adequate working capital also enables a
concern to avail cash discounts on the purchases and hence it
reduces costs.
5. Regular supply of raw materials: Sufficient working capital
ensures
regular
supply
of
raw
materials
and
continuous
production.
6. Regular payments of salaries wages and other day to day
commitments: A company which has ample working capital can
make regular payment of salaries, wages and other day to day
commitments
which raises the morale of
its
employees,
increases their efficiency, reduces wastage and cost and

enhances production and profits.
7. Exploitation of favorable market conditions: The concerns
with adequate working capital only can exploit favorable market
conditions such as purchasing its requirements in bulk when the
prices are lower.
8. Ability to face crisis: Adequate working capital enables a
concern to face business crisis in emergencies.
9. Quick and regular return on Investments: Every investor
wants a quick and regular return on his investment. Sufficiency
of working capital enables a concern to pay quick and regular
dividends to its investors, as there may not be much pressure to
plough back profits. This gains the confidence of its investors
and creates a favorable market to raise additional funds in the
future.
10. High
morale:
Adequacy
of
working
capital
creates
an
environment of security, confidence, and high morale and

creates overall efficiency in a business. Every business concern
should have adequate working capital to run its business
operations. It should have neither redundant excess working
capital nor inadequate shortage of working capital. Both, excess
as well as short working capital positions are bad for any
business. However, out of the two, it is the inadequacy of
working capital which is more dangerous from the point of view
of the firm.
The need or objectives of working capital
136
kumaraswamireddy
Mighty mech
The need for working capital arises mainly due to the time gap between
production and realization of cash. The process of production and sale cannot
be done instantaneously and hence the firm needs to hold the current assets
to fill-up the time gaps. There are time gaps in purchase of raw materials and
production; production and sales: and sales and realization of cash. The
working capital is needed mainly for the following purposes:
1. For the purchase of raw materials.
2. To pay wages, salaries and other day-to-day expenses and overhead
cost such as fuel, power and office expenses, etc.
3. To meet the selling expenses such as packing, advertising, etc.
4. To provide credit facilities to the customers and
5. To maintain the inventories of raw materials, work-in-progress, stores
and spares and finishes stock etc.
Generally, the level of working capital needed depends upon the time gap
(known as operating cycle) and the size of operations. Greater the size of the
business unit generally, larger will be the requirements of working capital.
The amount of working capital needed also goes on increasing with the
growth and expansion of business. Similarly, the larger the operating cycle,
the larger the requirement for working capital. There are many other factors,
which influence the need of working capital in a business, and these are
discussed below in the following pages.
Factors determining the working capital requirements

There are a large number of factors such as the nature and size of business,
the character of their operations, the length of production cycle, the rate of
stock turnover and the state of economic situation etc. that decode
requirement of working capital. These factors have different importance and
influence on firm differently. In general following factors generally influence
the working capital requirements.
1. Nature or character of business: The working capital requirements
of a firm basically depend upon the nature of its business. Public utility
undertakings like electricity, water supply and railways need very
limited working capital as their sales are on cash and are engaged in
provision of services only. On the other hand, trading firms require
more investment in inventories, receivables and cash and such they
need large amount of working capital. The manufacturing undertakings
also require sizable working capital.

137
kumaraswamireddy
Mighty mech
2. Size of business or scale of operations: The working capital

requirements of a concern are directly influenced by the size of its
business, which may be measured in terms of scale of operations.
Greater the size of a business unit, generally, larger will be the
requirements of working capital. However, in some cases, even a
smaller concern may need more working capital due to high overhead
charges, inefficient use of available resources and other economic
disadvantages of small size.
3. Production policy: If the demand for a given product is subject to
wide fluctuations due to seasonal variations, the requirements of
working capital, in such cases, depend upon the production policy. The
production could be kept either steady by accumulating inventories
during stack periods with a view to meet high demand during the peck
season or the production could be curtailed during the slack season
and increased during the peak season. If the policy is to keep the
production steady by accumulating inventories it will require higher
working capital.
4. Manufacturing
process/Length
of
production
cycle:
In
manufacturing business, the requirements of working capital will be in

direct proportion to the length of manufacturing process. Longer the
process period of manufacture, larger is the amount of working capital
required, as the raw materials and other supplies have to be carried for
a longer period.
5. Seasonal variations: If the raw material availability is seasonal, they
have to be bought in bulk during the season to ensure an
uninterrupted material for the production. A huge amount is, thus,
blocked in the form of material, inventories during such season, which
give rise to more working capital requirements. Generally, during the
busy season, a firm requires larger working capital then in the slack
season.
6. Working capital cycle: In a manufacturing concern, the working
capital cycle starts with the purchase of raw material and ends with the
realization of cash from the sale of finished products. This cycle
involves purchase of raw materials and stores, its conversion into
stocks of finished goods through workin progress with progressive
increment of labour and service costs, conversion of finished stock into
sales, debtors and receivables and ultimately realization of cash. This
cycle continues again from cash to purchase of raw materials and so
on. In general the longer the operating cycle, the larger the
requirement of working capital.
7. Credit policy: The credit policy of a concern in its dealings with
debtors and creditors influences considerably the requirements of
working capital. A concern that purchases its requirements on credit
138
kumaraswamireddy
Mighty mech
requires lesser amount of working capital compared to the firm, which

buys on cash. On the other hand, a concern allowing credit to its
customers shall need larger amount of working capital compared to a
firm selling only on cash.
8. Business cycles: Business cycle refers to alternate expansion and
contraction in general business activity. In a period of boom, i.e., when
the business is prosperous, there is a need for larger amount of
working capital due to increase in sales. On the contrary, in the times
of depression, i.e., when there is a down swing of the cycle, the
business contracts, sales decline, difficulties are faced in collection
from debtors and firms may have to hold large amount of working
capital.
9. Rate of growth of business: The working capital requirements of a
concern increase with the growth and expansion of its business
activities. The retained profits may provide for a part of working capital
but the fast growing concerns need larger amount of working capital
than the amount of undistributed profits.
SOURCE OF FINANCE
Incase of proprietorship business, the individual proprietor generally invests
his own savings to start with, and may borrow money on his personal security
or the security of his assets from others. Similarly, the capital of a partnership
from consists partly of funds contributed by the partners and partly of
borrowed funds. But the company from of organization enables the promoters
to raise necessary funds from the public who may contribute capital and
become members (share holders) of the company. In course of its business,
the company can raise loans directly from banks and financial institutions or
by issue of securities (debentures) to the public. Besides, profits earned may
also
be
reinvested
instead
of
being
distributed
as
dividend
to
the
shareholders.
Thus for any business enterprise, there are two sources of finance, viz, funds
contributed by owners and funds available from loans and credits. In other
words the financial resources of a business may be own funds and borrowed
funds.
Owner funds or ownership capital:

The ownership capital is also known as risk capital because every business
runs the risk of loss or low profits, and it is the owner who bears this risk. In
the event of low profits they do not have adequate return on their
investment. If losses continue the owners may be unable to recover even
139
kumaraswamireddy
Mighty mech
their original investment. However, in times of prosperity and in the case of a

flourishing business the high level of profits earned accrues entirely to the
owners of the business. Thus, after paying interest on loans at a fixed rate,
the owners may enjoy a much higher rate of return on their investment.
Owners contribute risk capital also in the hope that the value of the firm will
appreciate as a result of higher earnings and growth in the size of the firm.
The second characteristic of this source of finance is that ownership capital
remains permanently invested in the business. It is not refundable like loans
or borrowed capital. Hence a large part of it is generally used for a acquiring
long lived fixed assets and to finance a part of the working capital which is
permanently required to hold a minimum level of stock of raw materials, a
minimum amount of cash, etc.
Another characteristic of ownership capital related to the management of
business. It is on the basis of their contribution to equity capital that owners
can exercise their right of control over the management of the firm. Managers
cannot ignore the owners in the conduct of business affairs. The sole
proprietor directly controls his own business. In a partnership firm, the active
partner will take part in the management of business. A company is managed
by directors who are elected by the members (shareholders).
Merits:
Arising out of its characteristics, the advantages of ownership capital may be
briefly stated as follows:
1. It provides risk capital
2. It is a source of permanent capital
3. It is the basis on which owners acquire their right of control over
management
4. It does not require security of assets to be offered to raise ownership
capital
Limitations:
There are also certain limitations of ownership capital as a source of finance.
These are:
The amount of capital, which may be raised as owners fund depends on the
number of persons, prepared to take the risks involved. In a partnership
confer, a few persons cannot provide ownership capital beyond a certain limit
and this limitation is more so in case of proprietary form of organization.
140
kumaraswamireddy
Mighty mech
A joint stock company can raise large amount by issuing shares to the public.
Bus it leads to an increased number of people having ownership interest and
right of control over management. This may reduce the original investors
power of control over management. Being a permanent source of capital,
ownership funds are not refundable as long as the company is in existence,
even when the funds remain idle.
A company may find it difficult to raise additional ownership capital unless it
has high profit-earning capacity or growth prospects. Issue of additional
shares is also subject to so many legal and procedural restrictions.
Borrowed funds and borrowed capital: It includes all funds available by way of
loans or credit. Business firms raise loans for specified periods at fixed rates
of interest. Thus borrowed funds may serve the purpose of long-term,
medium-term or short-term finance. The borrowing is generally at against the
security of assets from banks and financial institutions. A company to borrow
the funds can also issue various types of debentures.
Interest on such borrowed funds is payable at half yearly or yearly but the
principal amount is being repaid only at the end of the period of loan. These
interest and principal payments have to be met even if the earnings are low
or there is loss. Lenders and creditors do not have any right of control over
the management of the borrowing firm. But they can sue the firm in a law
court if there is default in payment, interest or principal back.
Merits:
From the business point of view, borrowed capital has several merits.
1. It does not affect the owners control over management.
2. Interest is treated as an expense, so it can be charged against income
and amount of tax payable thereby reduced.
3. The amount of borrowing and its timing can be adjusted according to
convenience and needs, and
4. It involves a fixed rate of interest to be paid even when profits are very
high, thus owners may enjoy a much higher rate of return on
investment then the lenders.
Limitations:
There are certain limitations, too in case of borrowed capacity. Payment of
interest and repayment of loans cannot be avoided even if there is a loss.
141
kumaraswamireddy
Mighty mech
Default in meeting these obligations may create problems for the business
and result in decline of its credit worthiness. Continuing default may even
lead to insolvency of firm.
Secondly, it requires adequate security to be offered against loans. Moreover,
high rates of interest may be charged if the firms ability to repay the loan in
uncertain.
Source of Company Finance

Based upon the time, the financial resources may be classified into (1)
sources of long term (2) sources of short term finance. Some of these
sources also serve the purpose of medium term finance.
I. The source of long term finance are:
1. Issue of shares
2. Issue debentures
3. Loan from financial institutions
4. Retained profits and
5. Public deposits
II. Sources of Short-term Finance are:
1. Trade credit
2. Bank loans and advances and
3. Short-term loans from finance companies.
Sources of Long Term Finance

1. Issue of Shares: The amount of capital decided to be raised from
members of the public is divided into units of equal value. These units
are known as share and the aggregate values of shares are known as
share capital of the company. Those who subscribe to the share capital
become members of the company and are called shareholders. They
are the owners of the company. Hence shares are also described as
ownership securities.
2. Issue of Preference Shares: Preference share have three distinct
characteristics. Preference shareholders have the right to claim
dividend at a fixed rate, which is decided according to the terms of
issue of shares. Moreover, the preference dividend is to be paid first
out of the net profit. The balance, it any, can be distributed among
other shareholders that is, equity shareholders. However, payment of
142
kumaraswamireddy
Mighty mech
dividend is not legally compulsory. Only when dividend is declared,

preference shareholders have a prior claim over equity shareholders.
Preference shareholders also have the preferential right of claiming
repayment of capital in the event of winding up of the company.
Preference capital has to be repaid out of assets after meeting the loan
obligations and claims of creditors but before any amount is repaid to
equity shareholders.
Holders of preference shares enjoy certain privileges, which cannot be
claimed by the equity shareholders. That is why; they cannot directly
take part in matters, which may be discussed at the general meeting of
shareholders, or in the election of directors.
Depending upon the terms of conditions of issue, different types of
preference shares may be issued by a company to raises funds.
Preference shares may be issued as:
1. Cumulative or Non-cumulative
2. Participating or Non-participating
3. Redeemable or Non-redeemable, or as
4. Convertible or non-convertible preference shares.
In the case of cumulative preference shares, the dividend unpaid if any
in previous years gets accumulated until that is paid. No cumulative
preference shares have any such provision.
Participatory shareholders are entitled to a further share in the surplus
profits after a reasonable divided has been paid to equity shareholders.
Non-participating
preference
shares
do
not
enjoy
such
right.
Redeemable preference shares are those, which are repaid after a

specified period, where as the irredeemable preference shares are not
repaid. However, the company can also redeem these shares after a
specified period by giving notice as per the terms of issue. Convertible
preference shows are those, which are entitled to be converted into
equity shares after a specified period.
Merits:
Many companies due to the following reasons prefer issue of
preference shares as a source of finance.
1. It helps to enlarge the sources of funds.
143
kumaraswamireddy
Mighty mech
2. Some financial institutions and individuals prefer to invest in

preference shares due to the assurance of a fixed return.
3. Dividend is payable only when there are profits.
4. If
does
not
affect
the
equity
shareholders
control
over
management
Limitations:
The limitations of preference shares relates to some of its main features:
1. Dividend paid cannot be charged to the companys income as an
expense; hence there is no tax saving as in the case of interest on
loans.
2. Even through payment of dividend is not legally compulsory, if it is not
paid or arrears accumulate there is an adverse effect on the companys
credit.
3. Issue of preference share does not attract many investors, as the
return is generally limited and not exceed the rates of interest on loan.
On the other than, there is a risk of no dividend being paid in the event
of falling income.
1. Issue of Equity Shares: The most important source of raising long-term
capital for a company is the issue of equity shares. In the case of equity
shares there is no promise to shareholders a fixed dividend. But if the
company is successful and the level profits are high, equity shareholders
enjoy very high returns on their investment. This feature is very attractive to
many investors even through they run the risk of having no return if the
profits are inadequate or there is loss. They have the right of control over the
management of the company and their liability is limited to the value of
shares held by them.
From the above it can be said that equity shares have three distinct
characteristics:
1. The holders of equity shares are the primary risk bearers. It is the
issue of equity shares that mainly provides risk capital, unlike
borrowed capital. Even compared with preference capital, equity
shareholders are to bear ultimate risk.
2. Equity
shares
enable
much
higher
return
sot
be
earned
by
shareholders during prosperity because after meeting the preference

dividend and interest on borrowed capital at a fixed rate, the entire
surplus of profit goes to equity shareholders only.

144
kumaraswamireddy
Mighty mech
3. Holders of equity shares have the right of control over the company.
Directors are elected on the vote of equity shareholders.
Merits:
From the company point of view; there are several merits of issuing
equity shares to raise long-term finance.
1. It is a source of permanent capital without any commitment of a fixed
return to the shareholders. The return on capital depends ultimately on
the profitability of business.
2. It facilities a higher rate of return to be earned with the help borrowed
funds. This is possible due to two reasons. Loans carry a relatively
lower rate of interest than the average rate of return on total capital.
Secondly, there is tax saving as interest paid can be charged to income
as a expense before tax calculation.
3. Assets are not required to give as security for raising equity capital.
Thus additional funds can be raised as loan against the security of
assets.
Limitations:
Although there are several advantages of issuing equity shares to raise longterm capital.
1. The risks of fluctuating returns due to changes in the level of earnings
of the company do not attract many people to subscribe to equity
capital.
2. The value of shares in the market also fluctuate with changes in
business conditions, this is another risk, which many investors want to
avoid.
2. Issue of Debentures:
When a company decides to raise loans from the public, the amount of loan is
dividend into units of equal. These units are known as debentures. A
debenture is the instrument or certificate issued by a company to
acknowledge its debt. Those who invest money in debentures are known as
debenture holders. They are creditors of the company. Debentures are
145
kumaraswamireddy
Mighty mech
therefore called creditor ship securities. The value of each debentures is

generally fixed in multiplies of 10 like Rs. 100 or Rs. 500, or Rs. 1000.
Debentures carry a fixed rate of interest, and generally are repayable after a
certain period, which is specified at the time of issue. Depending upon the
terms and conditions of issue there are different types of debentures. There
are:
a. Secured or unsecured Debentures and
b. Convertible of Non convertible Debentures.
It debentures are issued on the security of all or some specific assets of the
company, they are known as secured debentures. The assets are mortgaged
in favor of the debenture holders. Debentures, which are not secured by a
charge or mortgage of any assets, are called unsecured debentures. The
holders of these debentures are treated as ordinary creditors.
Sometimes under the terms of issue debenture holders are given an option to
covert their debentures into equity shares after a specified period. Or the
terms of issue may lay down that the whole or part of the debentures will be
automatically converted into equity shares of a specified price after a certain
period. Such debentures are known as convertible debentures. If there is no
mention of conversion at the time of issue, the debentures are regarded as
non-convertible debentures.
Merits:
Debentures issue is a widely used method of raising long-term finance by
companies, due to the following reasons.
1. Interest payable on Debentures can be fixed at low rates than rate of
return on equity shares. Thus Debentures issue is a cheaper source of
finance.
2. Interest paid can be deducted from income tax purpose; there by the
amount of tax payable is reduced.
3. Funds raised for the issue of debentures may be used in business to
earn a much higher rate of return then the rate of interest. As a result
the equity shareholders earn more.
4. Another advantage of debenture issue is that funds are available from
investors who are not entitled to have any control over the
management of the company.
5. Companies often find it convenient to raise debenture capital from
financial institutions, which prefer to invest in debentures rather than

146
kumaraswamireddy
Mighty mech
in shares. This is due to the assurance of a fixed return and repayment

after a specified period.
Limitations:
Debenture issue as a source of finance has certain limitations too.
1. It involves a fixed commitment to pay interest regularly even when the
company has low earnings or incurring losses.
2. Debentures issue may not be possible beyond a certain limit due to the
inadequacy of assets to be offered as security.
Methods of Issuing Securities: The firm after deciding the amount to be
raised and the type of securities to be issued, must adopt suitable methods to
offer the securities to potential investors. There are for common methods
followed by companies for the purpose.
When securities are offered to the general public a document known as
Prospectus, or a notice, circular or advertisement is issued inviting the public
to subscribe to the securities offered thereby all particulars about the
company and the securities offered are made to the public. Brokers are
appointed and one or more banks are authorized to collect subscription.
Some times the entire issue is subscribed by an organization known as Issue
House, which in turn sells the securities to the public at a suitable time.
The company may negotiate with large investors of financial institutions who
agree to take over the securities. This is known as Private Placement of
securities.
When an exiting company decides to raise funds by issue of equity shares, it
is required under law to offer the new shares to the existing shareholders.
This is described as right issue of equity shares. But if the existing
shareholders decline, the new shares can be offered to the public.
3. Loans from financial Institutions:

Government with the main object of promoting industrial development has
set up a number of financial institutions. These institutions play an important
role as sources of company finance. Besides they also assist companies to
raise funds from other sources.
These institutions provide medium and long-term finance to industrial
enterprises at a reason able rate of interest. Thus companies may obtain
147
kumaraswamireddy
Mighty mech
direct loan from the financial institutions for expansion or modernization of

existing manufacturing units or for starting a new unit.
Often, the financial institutions subscribe to the industrial debenture issue of
companies some of the institutions (ICICI) and (IDBI) also subscribe to the
share issued by companies.
All such institutions also underwrite the public issue of shares and debentures
by companies. Underwriting is an agreement to take over the securities to the
extent there is no public response to the issue. They may guarantee loans,
which may be raised by companies from other sources.
Loans in foreign currency may also be granted for the import of machinery
and equipment wherever necessary from these institutions, which stand
guarantee for re-payments. Apart from the national level institutions
mentioned above, there are a number of similar institutions set up in different
states of India. The state-level financial institutions are known as State
Financial Corporation, State Industrial Development Corporations, State
Industrial Investment Corporation and the like. The objectives of these
institutions are similar to those of the national-level institutions. But they are
mainly concerned with the development of medium and small-scale industrial
units. Thus, smaller companies depend on state level institutions as a source
of medium and long-term finance for the expansion and modernization of
their enterprise.
4. Retained Profits:
Successful companies do not distribute the whole of their profits as dividend
to shareholders but reinvest a part of the profits. The amount of profit
reinvested in the business of a company is known as retained profit. It is
shown as reserve in the accounts. The surplus profits retained and reinvested
may be regarded as an internal source of finance. Hence, this method of
financing is known as self-financing. It is also called sloughing back of profits.
Since profits belong to the shareholders, the amount of retained profit is
treated as ownership fund. It serves the purpose of medium and long-term
finance. The total amount of ownership capital of a company can be
determined by adding the share capital and accumulated reserves.
Merits:
This source of finance is considered to be better than other sources for the
following reasons.
148
kumaraswamireddy
Mighty mech
1. As an internal source, it is more dependable than external sources. It

is not necessary to consider investors preference.
2. Use of retained profit does not involve any cost to be incurred for
raising the funds. Expenses on prospectus, advertising, etc, can be
avoided.
3. There is no fixed commitment to pay dividend on the profits
reinvested. It is a part of risk capital like equity share capital.
4. Control over the management of the company remains unaffected, as
there is no addition to the number of shareholder.
5. It does not require the security of assets, which can be used for raising
additional funds in the form of loan.
Limitations:
However, there are certain limitations on the part of retained profit.
1. Only well established companies can be avail of this sources of finance.
Even for such companies retained profits cannot be used to an
unlimited extent.
2. Accumulation of reserves often attract competition in the market,
3. With the increased earnings, shareholders expect a high rate of
dividend to be paid.
4. Growth
of
companies
through
internal
financing
may
attract
government restrictions as it leads to concentration of economic

power.
5. Public Deposits:
An important source of medium term finance which companies make use of
is public deposits. This requires advertisement to be issued inviting the
general public of deposits. This requires advertisement to be issued inviting
the general public to deposit their savings with the company. The period of
deposit may extend up to three yeas. The rate of interest offered is generally
higher than the interest on bank deposits. Against the deposit, the company
mentioning the amount, rate of interest, time of repayment and such other
information issues a receipt.
Since the public deposits are unsecured loans, profitable companies enjoying
public confidence only can be able to attract public deposits. Even for such
companies there are rules prescribed by government limited its use.

149
kumaraswamireddy
Mighty mech
Sources of Short Term Finance

The major sources of short-term finance are discussed below:
1. Trade credit: Trade credit is a common source of short-term finance
available to all companies. It refers to the amount payable to the
suppliers of raw materials, goods etc. after an agreed period, which is
generally less than a year. It is customary for all business firms to
allow credit facility to their customers in trade business. Thus, it is an
automatic source of finance. With the increase in production and
corresponding purchases, the amount due to the creditors also
increases. Thereby part of the funds required for increased production
is financed by the creditors. The more important advantages of trade
credit as a source of short-term finance are the following:
It is readily available according to the prevailing customs. There are no
special efforts to be made to avail of it. Trade credit is a flexible source
of finance. It can be easily adjusted to the changing needs for
purchases.
Where there is an open account for any creditor failure to pay the
amounts on time due to temporary difficulties does not involve any
serious consequence Creditors often adjust the time of payment in
view of continued dealings. It is an economical source of finance.
However, the liability on account of trade credit cannot be neglected.
Payment has to be made regularly. If the company is required to
accept a bill of exchange or to issue a promissory note against the
credit, payment must be made on the maturity of the bill or note. It is
a legal commitment and must be honored; otherwise legal action will
follow to recover the dues.
2. Bank loans and advances: Money advanced or granted as loan by
commercial banks is known as bank credit. Companies generally
secure bank credit to meet their current operating expenses. The most
common forms are cash credit and overdraft facilities. Under the cash
credit arrangement the maximum limit of credit is fixed in advance on
the security of goods and materials in stock or against the personal
security of directors. The total amount drawn is not to exceed the limit
fixed. Interest
is charged
on the amount actually drawn and
outstanding. During the period of credit, the company can draw, repay
and again draw amounts with in the maximum limit. In the case of
overdraft, the company is allowed to overdraw its current account up
150
kumaraswamireddy
Mighty mech
to the sanctioned limit. This facility is also allowed either against

personal security or the security of assets. Interest is charged on the
amount actually overdrawn, not on the sanctioned limit.
The advantage of bank credit as a source of short-term finance is that
the amount can be adjusted according to the changing needs of
finance. The rate of interest on bank credit is fairly high. But the
burden is no excessive because it is used for short periods and is
compensated by profitable use of the funds.
Commercial banks also advance money by discounting bills of
exchange. A company having sold goods on credit may draw bills of
exchange on the customers for their acceptance. A bill is an order in
writing requiring the customer to pay the specified amount after a
certain period (say 60 days or 90 days). After acceptance of the bill,
the company can drawn the amount as an advance from many
commercial banks on payment of a discount. The amount of discount,
which is equal to the interest for the period of the bill, and the balance,
is available to the company. Bill discounting is thus another source of
short-term finance available from the commercial banks.
3. Short term loans from finance companies: Short-term funds may
be available from finance companies on the security of assets. Some
finance companies also provide funds according to the value of bills
receivable or amount due from the customers of the borrowing
company, which they take over.
CAPITAL BUDGETING
Capital Budgeting: Capital budgeting is the process of making investment
decision in long-term assets or courses of action. Capital expenditure incurred
today is expected to bring its benefits over a period of time. These
expenditures are related to the acquisition & improvement of fixes assets.
Capital budgeting is the planning of expenditure and the benefit, which
spread over a number of years. It is the process of deciding whether or not to
invest in a particular project, as the investment possibilities may not be
rewarding. The manager has to choose a project, which gives a rate of return,
which is more than the cost of financing the project. For this the manager has
to evaluate the worth of the projects in-terms of cost and benefits. The
benefits are the expected cash inflows from the project, which are discounted
against a standard, generally the cost of capital.
151
kumaraswamireddy
Mighty mech
Capital Budgeting Process:

The capital budgeting process involves generation of investment, proposal
estimation of cash-flows for the proposals, evaluation of cash-flows, selection
of projects based on acceptance criterion and finally the continues revaluation
of investment after their acceptance the steps involved in capital budgeting
process are as follows.
1. Project generation
2. Project evaluation
3. Project selection
4. Project execution
1. Project generation: In the project generation, the company has to
identify the proposal to be undertaken depending upon its future plans of
activity. After identification of the proposals they can be grouped according to
the following categories:
a. Replacement of equipment: In this case the existing outdated
equipment and machinery may be replaced by purchasing new
and modern equipment.
b. Expansion: The Company can go for increasing additional
capacity in the existing product line by purchasing additional
equipment.
c. Diversification: The Company can diversify its product line by
way of producing various products and entering into different
markets. For this purpose, It has to acquire the fixed assets to
enable producing new products.
d. Research and Development: Where the company can go for
installation of research and development suing by incurring
heavy expenditure with a view to innovate new methods of
production new products etc.,
2. Project evaluation: In involves two steps.
a. Estimation of benefits and costs: These must be measured in
terms of cash flows. Benefits to be received are measured in
terms of cash flows. Benefits to be received are measured in
terms of cash in flows, and costs to be incurred are measured in
terms of cash flows.
b. Selection of an appropriate criterion to judge the desirability of
the project.

152
kumaraswamireddy
Mighty mech
3. Project selection: There is no standard administrative procedure for

approving the investment decisions. The screening and selection procedure
would differ from firm to firm. Due to lot of importance of capital budgeting
decision, the final approval of the project may generally rest on the top
management of the company. However the proposals are scrutinized at
multiple levels. Some times top management may delegate authority to
approve certain types of investment proposals. The top management may do
so by limiting the amount of cash out lay. Prescribing the selection criteria
and holding the lower management levels accountable for the results.
4. Project Execution: In the project execution the top management or the
project execution committee is responsible for effective utilization of funds
allocated for the projects. It must see that the funds are spent in accordance
with the appropriation made in the capital budgeting plan. The funds for the
purpose of the project execution must be spent only after obtaining the
approval of the finance controller. Further to have an effective cont. It is
necessary to prepare monthly budget reports to show clearly the total amount
appropriated, amount spent and to amount unspent.
Capital budgeting Techniques:

The capital budgeting appraisal methods are techniques of evaluation of
investment proposal will help the company to decide upon the desirability of
an investment proposal depending upon their; relative income generating
capacity and rank them in order of their desirability. These methods provide
the company a set of norms on the basis of which either it has to accept or
reject the investment proposal. The most widely accepted techniques used in
estimating the cost-returns of investment projects can be grouped under two
categories.
1. Traditional methods
2. Discounted Cash flow methods
1. Traditional methods
These methods are based on the principles to determine the desirability of an
investment project on the basis of its useful life and expected returns. These
153
kumaraswamireddy
Mighty mech
methods depend upon the accounting information available from the books of
accounts of the company. These will not take into account the concept of
time value of money, which is a significant factor to determine the
desirability of a project in terms of present value.
A. Pay-back period method: It is the most popular and widely recognized
traditional method of evaluating the investment proposals. It can be defined,
as the number of years required to recover the original cash out lay invested
in a project.
According to Weston & Brigham, The pay back period is the number of years
it takes the firm to recover its original investment by net returns before
depreciation, but after taxes.
According to James. C. Vanhorne, The payback period is the number of years
required to recover initial cash investment.
The pay back period is also called payout or payoff period. This period is
calculated by dividing the cost of the project by the annual earnings after tax
but before depreciation under this method the projects are ranked on the
basis of the length of the payback period. A project with the shortest payback
period will be given the highest rank and taken as the best investment. The
shorter the payback period, the less risky the investment is the formula for
payback period is
Cash outlay (or) original cost of project

Pay-back period =
------------------------------------------Annual cash inflow
Merits:
1. It is one of the earliest methods of evaluating the investment projects.
2. It is simple to understand and to compute.
3. It dose not involve any cost for computation of the payback period
4. It is one of the widely used methods in small scale industry sector
5. It can be computed on the basis of accounting information available
from the books.
Demerits:
1. This method fails to take into account the cash flows received by the
company after the pay back period.
2. It doesnt take into account the interest factor involved in an
investment
154
kumaraswamireddy
Mighty mech
outlay.
3. It doesnt take into account the interest factor involved in an
investment
outlay.
4. It is not consistent with the objective of maximizing the market value
of
the companys share.
5. It fails to consider the pattern of cash inflows i. e., the magnitude
and timing of cash in flows.
B. Accounting (or) Average rate of return method (ARR):
It is an accounting method, which uses the accounting information repeated
by the financial statements to measure the probability of an investment
proposal. It can be determine by dividing the average income after taxes by
the average investment i.e., the average book value after depreciation.
According to Soloman, accounting rate of return on an investment can be
calculated as the ratio of accounting net income to the initial investment, i.e.,
Average net income after taxes
ARR=
----]--------------------------------- X 100
Average Investment
Total Income after Taxes
Average net income after taxes =
----------------------------No. Of Years
Total Investment
Average investment =
---------------------2
On the basis of this method, the company can select all those projects whos
ARR is higher than the minimum rate established by the company. It can
reject the projects with an ARR lower than the expected rate of return. This
method can also help the management to rank the proposal on the basis of
ARR. A highest rank will be given to a project with highest ARR, where as a
lowest rank to a project with lowest ARR.
Merits:
1. It is very simple to understand and calculate.

2. It can be readily computed with the help of the available accounting
data.
155
kumaraswamireddy
Mighty mech
3. It uses the entire stream of earning to calculate the ARR.

Demerits:
1. It is not based on cash flows generated by a project.

2. This method does not consider the objective of wealth maximization
3. IT ignores the length of the projects useful life.
4. It does not take into account the fact that the profits can be reinvested.
II: Discounted cash flow methods:

The traditional method does not take into consideration the time value of
money. They give equal weight age to the present and future flow of incomes.
The DCF methods are based on the concept that a rupee earned today is
more worth than a rupee earned tomorrow. These methods take into
consideration the profitability and also time value of money.
A. Net present value method (NPV)
The NPV takes into consideration the time value of money. The cash flows of
different years and valued differently and made comparable in terms of
present values for this the net cash inflows of various period are discounted
using required rate of return which is predetermined.
According to Ezra Solomon, It is a present value of future returns,
discounted at the required rate of return minus the present value of the cost
of the investment.
NPV is the difference between the present value of cash inflows of a project
and the initial cost of the project.
According the NPV technique, only one project will be selected whose NPV is
positive or above zero. If a project(s) NPV is less than Zero. It gives
negative NPV hence. It must be rejected. If there are more than one project
with positive NPVs the project is selected whose NPV is the highest.
The formula for NPV is
NPV= Present value of cash inflows investment.
C1
C2
C3
Cn
NPV = ------ + ------- + -------- + ------(1+K)

156
kumaraswamireddy
Mighty mech
Co- investment
C1, C2, C3 Cn= cash inflows in different years.
K= Cost of the Capital (or) Discounting rate
D= Years.
Merits:
1. It recognizes the time value of money.
2. It is based on the entire cash flows generated during the useful life of
the asset.
3. It is consistent with the objective of maximization of wealth of the
owners.
4. The ranking of projects is independent of the discount rate used for
determining the present value.
Demerits:
1. It is different to understand and use.
2. The NPV is calculated by using the cost of capital as a discount rate.
But the concept of cost of capital. If self is difficult to understood and
determine.
3. It does not give solutions when the comparable projects are involved in
different amounts of investment.
4. It does not give correct answer to a question whether alternative
projects or limited funds are available with unequal lines.
B. Internal Rate of Return Method (IRR)
The IRR for an investment proposal is that discount rate which equates the
present value of cash inflows with the present value of cash out flows of an
investment. The IRR is also known as cutoff or handle rate. It is usually the
concerns cost of capital.
According to Weston and Brigham The internal rate is the interest rate that
equates the present value of the expected future receipts to the cost of the
investment outlay.
When compared the IRR with the required rate of return (RRR), if the IRR is
more than RRR then the project is accepted else rejected. In case of more
than one project with IRR more than RRR, the one, which gives the highest
IRR, is selected.

157
kumaraswamireddy
Mighty mech
The IRR is not a predetermine rate, rather it is to be trial and error method. It
implies that one has to start with a discounting rate to calculate the present
value of cash inflows. If the obtained present value is higher than the initial
cost of the project one has to try with a higher rate. Like wise if the present
value of expected cash inflows obtained is lower than the present value of
cash flow. Lower rate is to be taken up. The process is continued till the net
present value becomes Zero. As this discount rate is determined internally,
this method is called internal rate of return method.
P1 - Q
IRR = L+ --------- X D
P1 P2
L- Lower discount rate
P1 - Present value of cash inflows at lower rate.
P2 - Present value of cash inflows at higher rate.
Q- Actual investment
D- Difference in Discount rates.
Merits:
1. It consider the time value of money
2. It takes into account the cash flows over the entire useful life of the
asset.
3. It has a psychological appear to the user because when the highest
rate of return projects are selected, it satisfies the investors in terms of
the rate of return an capital
4. It always suggests accepting to projects with maximum rate of return.
5. It is inconformity with the firms objective of maximum owners
welfare.
Demerits:
1. It is very difficult to understand and use.
2. It involves a very complicated computational work.
3. It may not give unique answer in all situations.
C. Probability Index Method (PI)
The method is also called benefit cost ration. This method is obtained cloth a
slight modification of the NPV method. In case of NPV the present value of
cash out flows are profitability index (PI), the present value of cash inflows
are divide by the present value of cash out flows, while NPV is a absolute
measure, the PI is a relative measure.
158
kumaraswamireddy
Mighty mech
It the PI is more than one (>1), the proposal is accepted else rejected. If
there are more than one investment proposal with the more than one PI the
one with the highest PI will be selected. This method is more useful incase of
projects with different cash outlays cash outlays and hence is superior to the
NPV method.
The formula for PI is
Present Value of Future Cash Inflow
Probability index = ---------------------------------------Investment
Merits:
1. It requires less computational work then IRR method
2. It helps to accept / reject investment proposal on the basis of value of
the index.
3. It is useful to rank the proposals on the basis of the highest/lowest
value of the index.
4. It is useful to tank the proposals on the basis of the highest/lowest
value of the index.
5. It takes into consideration the entire stream of cash flows generated
during the useful life of the asset.
Demerits:
1. It is some what difficult to understand
2. Some people may feel no limitation for index number due to several
limitation involved in their competitions
3. It is very difficult to understand the analytical part of the decision on
the basis of probability index.

159
kumaraswamireddy
Mighty mech
QUESTIONS
1. What do you understand by working capital cycle and what is its
importance.
2. Describe the institutions providing long-term finance.
3. What do you understand by NPV method of appeasing long-term
investment proposal? Explain with the help of a proposal of your
choice.
4. What is ARR and Payback period? Compare and count ran-the two
methods.
5. What are the components of working capital? Explain each of them/
explain the factors affecting the requirements of working capital.
6. What are the merits & limitations of Pay back period? How does
discounting approach overcome the limitation of payback period?
7. Give various examples of capital budgeting decisions classify them into
specific kinds.
8. What is the importance of capital budgeting? Explain the basic steps
involved in evaluating capital budgeting proposals.
9. What is NPV & IRR Compare and contrast the two methods of
evaluating capital budgeting proposals.
10. What are major sources of short-term finance?
11. What is meant by discounting and time value of money? How is it
useful in capital budgeting?
QUIZ
1. Financing decision refers as _______________
)
(a) Investment decision
(b) Utilization of funds
(c) Acquisition of funds
(d) Dividend policy decision
2. Excess of current assets over current liabilities is known as_____

)
(a) Long run capital

(c) Net working capital
(b) Fixed capital

(d) Net worth
3. Long term investment of funds is called __________

)
(a) Working capital
(b) Revolving capital
(c) Capital budgeting
(d) Operational capital
4. A rate at which N.P.V = 0, then the rate is called__________

)
(a) Minimum Rate of Return
(b) Required Rate of Return
(c) Internal Rate of Return
(d) Average Rate of Return

160
kumaraswamireddy
5. _______ is the life blood of the business.

)
(a) Price
(b) Cost
(c) Finance
(d) Production
Mighty mech
6. Which method takes into consideration The Time Value of Money?

(
)
(a) Traditional Method
(b) Pay Back Period Method
(c) Discounted Cash Flow Method
(d) Average Rate of Return Method
7. Under Capital budgeting, only _____ Proposals are considered
)
(a) Very short-term
(b) Short-term
(c) Long-term
(d) Mid-term
8. The investment in short-term assets is known as____

)
(a) Capital Budgeting
(b) Fixed Investment
(c) Working capital management
(d) Fixed capital management
9. Which assets yield a return over a period of time in future?

)
(a) Short-term assets
(c) Long-term assets
(b) Current assets

(d) Fictious assets
10. The process of evaluating the relative worth of long-term investment

)
Proposals are called___________.

(a) Working capital management
(c) Capital Budgeting
(b) Current liabilities management

(d) Current assets management
11. What is the formula of Net Present Value (NPV)?

)
(b) Original cost of the project
(a) Present value of cash inflow
Present value of cash outflow
Avg. annual earnings
(c) Present value of cash inflow Present value of cash outflow
(d) Avg. Investment
Avg. earnings
12. What is the formula for profitability index?

)
(a) Present value of cash inflow Present value of cash outflow
(b) Original cost of the project

Avg. annual earnings
(d) Avg. Investment
Avg. earnings
(c) Present value of cash inflow

13. What is the current asset from the following?

)
161
kumaraswamireddy
(a) Creditors
(c) Debtors
Mighty mech
(b) Bills payable

(d) Bank over draft
14. What is the formula for Pay Back period?

)
(b) Annual earnings
(a) Avg. Investment
Avg. earnings
Cost of the product
(d) Cash inflow
(c) Cost of the project
Annual earnings
Cash outflow
15. __________ decision relates to the selection of assets in which

funds will be invested by a firm.
)
(a) Finance
(b) Dividend
(c) Investment
(d) None
16. ______ method is one of the traditional methods.

)
(a) Net present value
(c) Pay back period
(b) Profitability index

(d) internal rate of return
17. Funds needed for short-term purpose is known as ______.

)
(a) Fixed capital management
(c) Working capital management
(b) Capital Budgeting

(d) Long-term capital management
18. What is the formula for Average Rate of Return (ARR)?

)
(a) Cost of the project
Avg. earnings
(c) Avg. earnings
Avg. investment
(b) Present value of cash inflow

(d) Avg. investment
Avg. earnings
19. What is the current Liability from the following?

)
(a) Bills Receivable
(b) Closing stock
(c) Bills payable
(d) Cash in hand
20. The Pay Back Period also called as ________.

)
(a) Current Period
(b) Pay reserve method
(c) Pay off Period
(d) None
21. ______ holders have preference over dividends.

)
(a) Equity share
(b) Debenture
(c) Preference share
(d) Ordinary share
22. ______ holders are the real owners of the company.

)
(a) Debenture
(b) Preference share

162
kumaraswamireddy
(c) Equity share
Mighty mech
(d) Liability
23. Interest is paid on loan and dividend is paid for _____.

)
(a) Debenture
(b) Public deposits
(c) Shares
(d) Securities
24. ______ are deducted from Current Assets, while calculating
Working Capital.
)
(a) Fixed Assets
(b) Fixed Liabilities
(c) Current Liabilities
(d) Fictious Assets
UNIT - VII
INTRODUCTION TO FINANCIAL ACCOUNTING
CONCEPTS
Synopsis:
1. Introduction
2. Book-keeping and Accounting
3. Function of an Accountant
4. Users of Accounting
5. Advantages of Accounting
6. Limitations of Accounting
7. Basic Accounting concepts
163
kumaraswamireddy
Mighty mech
1. INTRODUCITON
As you are aware, every trader generally starts business for purpose of
earning profit. While establishing business, he brings own capital, borrows
money from relatives, friends, outsiders or financial institutions. Then he
purchases machinery, plant , furniture, raw materials and other assets. He
starts buying and selling of goods, paying for salaries, rent and other
expenses, depositing and withdrawing cash from bank. Like this he
undertakes innumerable transactions in business. Observe the following
transactions of small trader for one week during the month of July, 1998.
1998
Rs.
July 24
Purchase of goods from Sree Ram
12,000
July 25
Goods sold for cash
5,000
July 25
Sold gods to Syam on credit
8,000
July 26
Advertising expenses
5,200
July 27
Stationary expenses
July 27
Withdrawal for personal use
2,500
July 28
Rent paid through cheque
1,000
July 31
Salaries paid
9,000
July 31
Received cash from Syam
5,000
600
The number of transactions in an organization depends upon the

size of the organization. In small organizations, the transactions generally
will be in thousand and in big organizations they may be in lakhs. As such
it is humanly impossible to remember all these transactions. Further, it
may not by possible to find out the final result of the business without
recording and analyzing these transactions.
Accounting came into practice as an aid to human memory by
maintaining a systematic record of business transactions.
1.1
History of Accounting:
Accounting is as old as civilization itself. From the ancient relics of
Babylon, it can be will proved that accounting did exist as long as 2600
B.C. However, in modern form accounting based on the principles of
Double Entry System came into existence in 17th Century. Fra Luka
164
kumaraswamireddy
Mighty mech
Paciolo, a Fransiscan monk and mathematician published a book De

computic et scripturies in 1494 at Venice in Italyl. This book was
translated into English in 1543. In this book he covered a brief section on
book-keeping.
1.2
Origin of Accounting in India:

Accounting was practiced in India thousand years ago and there is
a clear evidence for this. In his famous book Arthashastra Kautilya dealt
with not only politics and economics but also the art of proper keeping of
accounts. However, the accounting on modern lines was introduced in
India after 1850 with the formation joint stock companies in India.
Accounting in India is now a fast developing discipline. The two
premier Accounting Institutes in India viz., chartered Accountants of India
and the Institute of Cost and Works Accountants of India are making
continuous and substantial contributions. The international Accounts
Standards Committee (IASC) was established as on 29th June. In India the
Accounting Standards Board (ASB) is formulating Accounting Standards
on the lines of standards framed by International Accounting Standards
Committee.
2. BOOK-KEEPING AND ACCOUNTING
According to G.A. Lee the accounting system has two stages.
1. The making of routine records in the prescribed from and according
to set rules of all events with affect the financial state of the
organization; and
2. The summarization from time to time of the information contained
in the records, its presentation in a significant form to interested
parties and its interpretation as an aid to decision making by these
parties.
First stage is called Book-Keeping and the second one is Accounting.
Book Keeping: Book Keeping involves the chronological recording of
financial transactions in a set of books in a systematic manner.

165
Accounting:
kumaraswamireddy
Mighty mech
Accounting is concerned with the maintenance of accounts
giving stress to the design of the system of records, the preparation of

reports based on the recorded date and the interpretation of the reports.
Distinction between Book Keeping and Accountancy

Thus, the terms, book-keeping and accounting are very closely
related, through there is a subtle difference as mentioned below.
1. Object :
The object of book-keeping is to prepare original books of
Accounts. It is restricted to journal, subsidiary book and ledge accounts

only. On the other hand, the main object of accounting is to record
analyse and interpret the business transactions.
2. Level of Work:
Book-keeping is restricted to level of work. Clerical
work is mainly involved in it. Accountancy on the other hand, is concerned

with all level of management.
3. Principles of Accountancy: In Book-keeping Accounting concepts
and conventions will be followed by all without any difference. On the
other hand, various firms follow various methods of reporting and
interpretation in accounting.
3. Final Result:
In Book-Keeping it is not possible to know the final
result of business every year,

2.1 Meaning of Accounting
Thus, book-keeping is an art of recording the business transactions
in the books of original entry and the ledges. Accountancy begins where
Book-keeping ends. Accountancy means the compiliation of accounts in
such a way that one is in a position to know the state of affairs of the
business. The work of an accountant is to analyse, interpret and review
the accounts and draw conclusion with a view to guide the management in
chalking out the future policy of the business.
2.2 Definition of Accounting:

Smith and Ashburne:
Accounting is a means of measuring and
reporting the results of economic activities.

166
R.N. Anthony:
kumaraswamireddy
Accounting
system
is
Mighty mech
means
of
collecting
summarizing, analyzing and reporting in monetary terms, the information

about the business.
American Institute of Certified Public Accountants (AICPA): The
art of recording, classifying and summarizing in a significant manner and
in terms of money transactions and events, which are in part at least, of a
financial character and interpreting the results thereof.
Thus, accounting is an art of identifying, recording, summarizing
and
interpreting
business
transactions
of
financial
nature.
Hence
accounting is the Language of Business.

2.3 Branches of Accounting:
The important branches of accounting are:
1.
Financial Accounting: The purpose of Accounting is to ascertain

the financial results i.e. profit or loass in the operations during a
specific period. It is also aimed at knowing the financial position,
i.e. assets, liabilities and equity position at the end of the period.
It also provides other relevant information to the management as
a basic for decision-making for planning and controlling the
operations of the business.
2.
Cost Accounting:
The purpose of this branch of accounting is to
ascertain the cost of a product / operation / project and the costs

incurred for carrying out various activities. It also assist the
management in controlling the costs. The necessary data and
information are gatherr4ed form financial and other sources.
3.
Management Accounting :
Its aim to assist the management
in taking correct policy decision and to evaluate the impact of its

decisions and actions. The data required for this purpose are
drawn accounting and cost-accounting.
4.
Inflation Accounting :
It is concerned with the adjustment in
the values of assest and of profit in light of changes in the price

level. In a way it is concerned with the overcoming of limitations
that arise in financial statements on account of the cost
assumption (i.e recording of the assets at their historical or
original cost) and the assumption of stable monetary unit.
167
5.
kumaraswamireddy
Human Resource Accounting :
Mighty mech
It is a branch of accounting
which seeks to report and emphasize the importance of human

resources in a companys earning process and total assets. It is
concerned with the process of identifying and measuring data
about human resources and communicating this information to
interested parties. In simple words, it is accounting for people as
organizational resources.
3.
FUNCTIONS OF AN ACCOUNTANT
The job of an accountant involves the following types of accounting

works :
1. Designing Work :
It includes the designing of the accounting
system, basis for identification and classification of financial

transactions and events, forms, methods, procedures, etc.
2. Recording Work :
The financial transactions are identified,
classified and recorded in appropriate books of accounts according

to principles. This is Book Keeping. The recording of transactions
tends to be mechanical and repetitive.
3. Summarizing Work :
The recorded transactions are summarized
into significant form according to generally accepted accounting

principles. The work includes the preparation of profit and loss
account, balance sheet. This phase is called preparation of final
accounts
4. Analysis and Interpretation Work:
The financial statements
are analysed by using ratio analysis, break-even analysis, funds

flow and cash flow analysis.
5. Reporting Work:
The summarized statements along with
analysis and interpretation are communicated to the interested

parties or whoever has the right to receive them. For Ex. Share
holders. In addition, the accou8nting departments has to prepare
and send regular reports so as to assist the management in
decision making. This is Reporting.
6. Preparation of Budget :
The management must be able to
reasonably estimate the future requirements and opportunities. As

an aid to this process, the accountant has to prepare budgets, like
168
kumaraswamireddy
Mighty mech
cash budget, capital budget, purchase budget, sales budget etc.

this is Budgeting.
7. Taxation Work :
The accountant has to prepare various
statements and returns pertaining to income-tax, sales-tax, excise

or customs duties etc., and file the returns with the authorities
concerned.
8. Auditing : It involves a critical review and verification of the books
of accounts statements and reports with a view to verifying their
accuracy. This is Auditing
This is what the accountant or the accounting department does.
A person may be placed in any part of Accounting Department or MIS
(Management
Information
System)
Department
or
in
small
organization, the same person may have to attend to all this work.
4. USERS OF ACCOUNTING INFORMATION
Different categories of users need different kinds of information for
making decisions. The users of accounting can be divided in two board groups
(1). Internal users and (2). External users.
4.1 Internal Users:
Managers :
These are the persons who manage the business, i.e.
management at he top, middle and lower levels. Their requirements of

information are different because they make different types of decisions.
Accounting reports are important to managers for evaluating the
results of their decisions. In additions to external financial statements,
managers need detailed internal reports either branch division or department
or product-wise. Accounting reports for managers are prepared much more
frequently than external reports.
Accounting information also helps the managers in appraising the
performance of subordinates. As such Accounting is termed as the eyes and
ears of management.
4.2 External Users :
1. Investors :
Those who are interested in buying the shares of company
are naturally interested in the financial statements to know how safe the
investment already made is and how safe the proposed investments will be.

169
2. Creditors :
kumaraswamireddy
Mighty mech
Lenders are interested to know whether their load,
principal and interest, will be paid when due. Suppliers and other creditors are
also interested to know the ability of the firm to pay their dues in time.
3. Workers :
In our country, workers are entitled to payment of bonus
which depends on the size of profit earned. Hence, they would like to be
satisfied that he bonus being paid to them is correct. This knowledge also
helps them in conducting negotiations for wages.
4. Customers :
They are also concerned with the stability and profitability
of the enterprise. They may be interested in knowing the financial strength of

the company to rent it for further decisions relating to purchase of goods.
5. Government:
Governments all over the world are using financial
statements for compiling statistics concerning business which, in turn, helps

in compiling national accounts. The financial statements are useful for tax
authorities for calculating taxes.
6. Public : The public at large interested in the functioning of the
enterprises because it may make a substantial contribution to the local
economy in many ways including the number of people employed and their
patronage to local suppliers.
7. Researchers:
The financial statements, being a mirror of business
conditions, is of great interest to scholars undertaking research in accounting

theory as well as business affairs and practices.
5. ADVANTAGES FROM ACCOUNTING

The role of accounting has changed from that of a mere record keeping
during the 1st decade of 20th century of the present stage, which it is accepted
as information system and decision making activity. The following are the
advantages of accounting.
1. Provides for systematic records: Since all the financial transactions
are recorded in the books, one need not rely on memory. Any
information required is readily available from these records.
2. Facilitates the preparation of financial statements:
Profit and loss
accountant and balance sheet can be easily prepared with the help of
the information in the records. This enables the trader to know the net
result of business operations (i.e. profit / loss) during the accounting
170
kumaraswamireddy
Mighty mech
period and the financial position of the business at the end of the
accounting period.
3. Provides control over assets:
Book-keeping provides information
regarding cash in had, cash at bank, stock of goods, accounts

receivables from various parties and the amounts invested in various
other assets. As the trader knows the values of the assets he will have
control over them.
4. Provides the required information:
Interested parties such as
owners, lenders, creditors etc., get necessary information at frequent

intervals.
5. Comparative study: One can compare the present performance of the
organization with that of its past. This enables the managers to draw
useful conclusion and make proper decisions.
6. Less Scope for fraud or theft: It is difficult to conceal fraud or theft
etc., because of the balancing of the books of accounts periodically. As
the work is divided among many persons, there will be check and
counter check.
7. Tax matters: Properly maintained book-keeping records will help in the
settlement of all tax matters with the tax authorities.
8. Ascertaining Value of Business: The accounting records will help in
ascertaining the correct value of the business. This helps in the event of
sale or purchase of a business.
9. Documentary evidence: Accounting records can also be used as an
evidence in the court to substantiate the claim of the business. These
records are based on documentary proof. Every entry is supported by
authentic vouchers. As such, Courts accept these records as evidence.
10. Helpful to management: Accounting is useful to the management in
various ways. It enables the management to asses the achievement of
its performance. The weakness of the business can be identified and
corrective measures can be applied to remove them with the helps
accounting.
6. LIMITATIONS OF ACCOUNTING
The following are the limitations of accounting.
1. Does not record all events: Only the transactions of a financial
character will be recorded under book-keeping. So it does not reveal a
171
kumaraswamireddy
Mighty mech
complete picture about the quality of human resources, locational

advantage, business contacts etc.
2. Does not reflect current values:
The data available under book-
keeping is historical in nature. So they do not reflect current values.

For instance, we record the value of stock at cost price or market
price, which ever is less. In case of, building, machinery etc., we adopt
historical cost as the basis. Infact, the current values of buildings,
plant and machinery may be much more than what is recorded in the
balance sheet.
3. Estimates based on Personal Judgment: The estimate used for
determining the values of various items may not be correct. For
example, debtor are estimated in terms of collectibility, inventories are
based on marketability, and fixed assets are based on useful working
life. These estimates are based on personal judgment and hence
sometimes may not be correct.
4. Inadequate information on costs and Profits: Book-keeping only
provides information about the overall profitability of the business. No
information is given about the cost and profitability of different
activities of products or divisions.
7. BASIC ACCOUNTING CONCEPTS
Accounting has been evolved over a period of several centuries. During
this period, certain rules and conventions have been adopted. They serve as
guidelines in identifying the events and transactions to be accounted for
measuring, recording, summarizing and reporting them to the interested
parties. These rules and conventions are termed as Generally Accepted
Accounting Principles. These principles are also referred as standards,
assumptions, concepts, conventions doctrines, etc. Thus, the accounting
concepts are the fundamental ideas or basic assumptions underlying the
theory and practice of financial accounting. They are the broad working rules
for all accounting activities developed and accepted by the accounting
profession.
1.
Basic accounting concepts may be classified into two broad categories.

Concept
to
be
observed
at
the
time
of
recording
transactions.(Recording Stage).
2.
Concept to be observed at the time of preparing the financial

accounts (Reporting Stage)
FINAL ACCOUNTS
172
kumaraswamireddy
Mighty mech
INTRODUCTION: The main object of any Business is to make profit. Every

trader generally starts business for the purpose of earning profit. While
establishing Business, he brings his own capital, borrows money from
relatives,
friends,
outsiders
or
financial
institutions,
then
purchases
machinery, plant, furniture, raw materials and other assets. He starts buying
and selling of goods, paying for salaries, rent and other expenses, depositing
and withdrawing cash from Bank. Like this he undertakes innumerable
transactions in Business.
The number of Business transactions in an organization
depends up on the size of the organization. In small organizations the
transactions generally will be in thousands and in big organizations they may
be in lacks. As such it is humanly impossible to remember all these
transactions. Further it may not be possible to find out the final result of the
Business with out recording and analyzing these transactions.
Accounting came in practice as an aid to human memory
by maintaining a systematic record of Business transactions.
BOOK KEEPING AND ACCOUNTING:
According to G.A.Lee the Accounting system has two
stages. First stage is Book keeping and the second stage is accounting.
[A]. BOOK KEEPING:
Book keeping involves the chronological recording of financial
transactions in a set of books in a systematic manner
Book keeping is the system of recording Business transactions
for the purpose of providing reliable information to the owners
and managers about the state and prospect of the Business
concepts.
Thus Book keeping is an art of recording business transactions
in the books of original entry and the ledges.
[B]. ACCOUNTING: Accounting begins where the Bookkeeping ends
1. SMITH AND ASHBUNNE: Accounting means measuring and reporting the
results of economic activities.
2.
R.N ANTHONY:
Accounting is a system of collecting, summarizing,
Analyzing and reporting in monster terms, the information about the

Business.
3. ICPA: Recording, classifying and summarizing is a significant manner and
in terms of money transactions and events, which are in part at least, of a
financial character and interpreting the results there.
173
kumaraswamireddy
Mighty mech
Thus accounting is an art of recording, classifying, summarizing and

interpreting business transactions of financial nature. Hence accounting is the
Language of Business.
ADVANTAGE OF ACCOUNTING
The following are the advantages of Accounting
1. PROVIDES FOR SYSTEMATIC RECORDS:
Since all the financial
transactions are recorded in the books, one need not rely on memory.
Any information required is readily available from these records.
2. FACILITATES THE PRPARATION OF FINANCIAL STATEMENTS: Profit
and Loss account and balance sheet can be easily prepared with the
help of the information in the records. This enables the trader to know
the net result of Business operations (i.e. profit/loss) during the
accounting period and the financial position of the business at the end
of the accounting period.
3. PROVIDES
CONTROL
OVER
ASSETS:
Book
keeping
provides
information regarding cash in hand, cash at hand, stack of goods,

accounts receivable from various parties and the amounts invested in
various other assets. As the trader knows the values of the assets he
will have control over them.
4. PROVIES THE REQUIRED INFORMATION: Interested parties such as
owners, lenders, creditors etc, get necessary information at frequent

intervals.
5. COMPARITIVE STUDY: One can compare present performance of the
organization with that of its past. This enables the managers to draw
useful conclusions and make proper decisions.
6. LESS SCOPE FOR FRAUD OR THEFT: It is difficult to conceal fraud or
theft etc. because of the balancing of the books of accounts

periodically. As the work is divided among many persons, there will be
check and counter check.
7. TAX MALTERS: Properly maintained Book keeping records will help in
the settlement of all tax matters with the tax authorities.

174
kumaraswamireddy
Mighty mech
8. ASCERTAINING VALUE OF BUSINESS: The accounting records will help
in ascertaining the correct value of the Business. This helps in the

event of sale or purchase of a business.
9. DOCUMENTARY EVIDENCE: Accounting records can also be used as
evidence in the court of substantial the claim of the Business. Thus

records are based on documentary proof. Authentic vouchers support
every entry. As such, courts accept these records as evidence.
10.HELPFUL TO MANAGEMENT: Accounting is useful to the management in
various ways. It enables the management to assess the achievement of its
performance. The weaknesses of the business can be identified and
corrective measures can be applied to remove them with the help of
accounting.
LIMITATIONS OF ACCOUNTING
The following are the limitations of accounting..
1.DOES NOT RECORD ALL EVENTS:
Only the transactions of a financial
character will be recorded under book keeping. So it does not reveal a

complete picture about the quality of human resources, locational
advantages, business contacts etc.
2.DOES NOT REFLECT CURRENT VLAUES: The data available under book
keeping is historical in nature. So they do not reflect current values. For
instance we record the values of stock at cost price or market price, which
ever is less. In case of building, machinery etc., we adapt historical case
as the basis. Infact, the current values of Buildings, plant and machinery
may be much more than what is recorded in the balance sheet.
3. ESTIMATES BASED ON PERSONAL JUDGEMENT: The estimates used for
determining the values of various items may not be correct. For example,
debtors are estimated in terms of collectibles, inventories are based on
marketability and fixed assets are based on useful working life. These
estimates are based on personal judgment and hence sometimes may not
be correct.
4. INADEQUATE INFORMATION ON COSTS AND PROFITS: Book keeping
only provides information about over all profitability of the business.
No information is given about the cost and profitability of different
activities of products or divisions.
175
kumaraswamireddy
Mighty mech
BASIC ACCOUNTING CONCEPTS

Accounting is a system evolved to achieve a set of objectives. In order to
achieve the goals, we need a set of rules or guidelines. These guidelines are
termed here as BASIC ACCOUNTING ONCEPTS. The term concept means
an idea or thought. Basic accounting concepts are the fundamental ideas or
basic
assumptions
underlying
the
theory
and
profit
of
FINANCIAL
ACCOUNTING. These concepts help in bringing about uniformity in the

practice of accounting. In accountancy following concepts are quite popular.
1. BUSINESS ENTITY CONEPT:
separate from the proprietor.
In this concept Business is treated as
All the
Transactions recorded in the book of Business and not in the books of

proprietor. The proprietor is also treated as a creditor for the Business.
2. GOING CONCERN CONCEPT: This concept relates with the long life of
Business. The assumption is that business will continue to exist for unlimited
period unless it is dissolved due to some reasons or the other.
3. MONEY MEASUREMENT CONCEPT: In this concept Only those transactions
are recorded in accounting which can be expressed in terms of money, those
transactions which can not be expressed in terms of money are not recorded
in the books of accounting.
4. COST CONCEPT: Accounting to this concept, can asset is recorded at its
cost in the books of account. i.e., the price, which is paid at the time of
acquiring it. In balance sheet, these assets appear not at cost price every
year, but depreciation is deducted and they appear at the amount, which is
cost, less classification.
5. ACCOUNTING PERIOD CONCEPT: every Businessman wants to know the
result of his investment and efforts after a certain period. Usually one-year
period is regarded as an ideal for this purpose. This period is called
Accounting Period. It depends on the nature of the business and object of the
proprietor of business.
6. DUAL ASCEPT CONCEPT:
According to this concept Every business
transactions has two aspects, one is the receiving benefit aspect another one
is giving benefit aspect. The receiving benefit aspect is termed as
DEBIT, where as the giving benefit aspect is termed as CREDIT.
Therefore, for every debit, there will be corresponding credit.

176
kumaraswamireddy
Mighty mech
7. MATCHING COST CONCEPT: According to this concept The expenses

incurred during an accounting period, e.g., if revenue is recognized on all
goods sold during a period, cost of those good sole should also
Be charged to that period.
8. REALISATION CONCEPT: According to this concept revenue is recognized
when a sale is made. Sale is
Considered to be made at the point when the property in goods posses to the
buyer and he becomes legally liable to pay.
ACCOUNTING CONVENTIONS
Accounting is based on some customs or usages. Naturally accountants here

to adopt that usage or custom.
They are termed as convert conventions in accounting. The following are
some of the important accounting conventions.
1.FULL DISCLOSURE: According to this convention accounting reports should
disclose fully and fairly the information. They purport to represent. They
should be prepared honestly and sufficiently disclose information which is if
material interest to proprietors, present and potential creditors and investors.
The companies ACT, 1956 makes it compulsory to provide all the information
in the prescribed form.
2.MATERIALITY: Under this convention the trader records important factor
about the commercial activities. In the form of financial statements if any
unimportant information is to be given for the sake of clarity it will be given
as footnotes.
3.CONSISTENCY: It means that accounting method adopted should not be
changed from year to year. It means that there should be consistent in the
methods or principles followed. Or else the results of a year
Cannot be conveniently compared with that of another.
4. CONSERVATISM: This convention warns the trader not to take unrealized
income in to account. That is why the practice of valuing stock at cost or
market price, which ever is lower is in vague. This is the policy of playing
safe; it takes in to consideration all prospective losses but leaves all
prospective profits.
KEY WORDS IN BOOK-KEEPING
177
kumaraswamireddy
Mighty mech
1. TRANSACTIONS: Any sale or purchase of goods of services is called
the transaction.
Transactions are two types.
[a]. cash transaction: cash transaction is one
where cash receipt or payment is involved in the
exchange.
[b]. Credit transaction: Credit transaction will not
have cash, either received or paid, for something
given or received respectively.
2.GOODS: Fill those things which a firm purchases for resale are called
goods.
3.PURCHASES: Purchases means purchase of goods, unless it is stated
otherwise it also represents the
Goods purchased.
4.SALES: Sales means sale of goods, unless it is stated otherwise it
also represents these goods sold.
5.EXPENSES: Payments for the purchase of goods as services are
known as expenses.
6.REVENUE: Revenue is the amount realized or receivable from the
sale of goods or services.
7.ASSETS: The valuable things owned by the business are known as
assets. These are the properties
Owned by the business.
8.LIABILITIES: Liabilities are the obligations or debts payable by the
enterprise in future in the term
Of money or goods.
9. DEBTORS: Debtors means a person who owes money to the trader.
10.CREDITORS: A creditor is a person to whom something is owned by
the business.
11.DRAWINGS: cash or goods withdrawn by the proprietor from the
Business for his personal or Household is termed to as drawing.

178
kumaraswamireddy
Mighty mech
12.RESERVE: An amount set aside out of profits or other surplus and

designed to meet contingencies.
13.ACCOUNT: A summarized statements of transactions relating to a
particular person, thing,
Expense or income.
14.DISCOUNT: There are two types of discounts..
a. cash discount: An allowable made to encourage frame
payment or before the expiration of the period
allowed for credit.
b. Trade discount: A deduction from the gross or
catalogue price allowed to traders who buys them for
resale.
CLASSIFICATION OF BUSINESS TRANSACTIONS
All
business
transactions
are
classified
into
three
categories:
1.Those relating to persons
2.Those relating to property(Assets)
3.Those relating to income & expenses
Thus, three classes of accounts are maintained for recording all
business transactions. They are:
1.Personal accounts
2.Real accounts
3.Nominal accounts
1.Personal Accounts :Accounts which are transactions with persons are called
Personal Accounts .
A separate account is kept on the name of each person for recording the
benefits received from ,or given to the person in the course of dealings with
him.
E.g.:
Krishnas A/C, Gopals A/C, SBI A/C, Nagarjuna Finanace Ltd.A/C,
ObulReddy & Sons A/C , HMT Ltd. A/C, Capital A/C, Drawings A/C etc.
2.Real Accounts: The accounts relating to properties or assets are known as
Real Accounts .Every business needs assets such as machinery , furniture
etc, for running its activities .A separate account is maintained for each asset
owned by the business .
E.g.: cash A/C, furniture A/C, building A/C, machinery A/C etc.

179
kumaraswamireddy
Mighty mech
3.NominalAccounts:Accounts relating to expenses, losses, incomes and gains

are known as Nominal Accounts. A separate account is maintained for each
item of expenses, losses, income or gain.
E.g.:
Salaries
A/C, stationery A/C, wages A/C, postage A/C, commission
A/C, interest A/C, purchases A/C, rent A/C, discount A/C, commission
received A/C, interest received A/C, rent received A/C, discount received A/C.
Before recording a transaction, it is necessary to find out which of the
accounts is to be debited and which is to be credited. The following three
different rules have been laid down for the three classes of accounts.
1.Personal Accounts: The account of the person receiving benefit (receiver) is
to be debited and the account of the person
giving the benefit (given) is to
be credited.
Rule: Debit----The Receiver

Credit---The Giver
2.Real Accounts: When an asset is coming into the business, account of that
asset is to be debited .When an asset is going out of the business, the
account of that asset is to be credited.
Rule: Debit----What comes in

Credit---What goes out
3. Nominal Accounts: When an expense is incurred or loss encountered, the

account representing the expense or loss is to be debited . When any income
is earned or gain made, the account representing the income of gain is to be
credited.
Rule: Debit----All expenses and losses

Credit---All incomes and gains
JOURNAL
The first step in accounting therefore is the record of all the transactions in
the books of original entry viz., Journal and then posting into ledges.
180
kumaraswamireddy
Mighty mech
JOURNAL: The word Journal is derived from the Latin word journ which
means a day. Therefore, journal means a day Book in day-to-day business
transactions are recorded in chronological order.
Journal is treated as the book of original entry or first entry or prime entry.
All the business transactions are recorded in this book before they are posted
in the ledges. The journal is a complete and chronological(in order of dates)
record of business transactions. It is recorded in a systematic manner. The
process of recording a transaction in the journal is called JOURNALISING.
The entries made in the book are called Journal Entries.
The proforma of Journal is given below.
Date
1998 Jan 1
Particulars
L.F.
Debit
Credit
no
RS.
RS.
10,000/-
10,000/-
Purchases account to cash

account(being
goods
purchased for cash)
LEDGER
All the transactions in a journal are recorded in a chronological order. After a
certain period, if we want to know whether a particular account is showing a
debit or credit balance it becomes very difficult. So, the ledger is designed to
accommodate the various accounts maintained the trader. It contains the
final or permanent record of all the transactions in duly classified form. A
ledger is a book which contains various accounts. The process of transferring
entries from journal to ledger is called POSTING.
Posting is the process of entering in the ledger the entries given in the
journal. Posting into ledger is done periodically, may be weekly or fortnightly
as per the convenience of the business. The following are the guidelines for
posting transactions in the ledger.
1. After the completion of Journal entries only posting is to be made in
the ledger.
2. For each item in the Journal a separate account is to be opened.
Further, for each new item a new account is to be opened.
3. Depending upon the number of transactions space for each account is
to be determined in the ledger.
181
kumaraswamireddy
Mighty mech
4. For each account there must be a name. This should be written in the
top of the table. At the end of the name, the word Account is to be
added.
5. The debit side of the Journal entry is to be posted on the debit side of
the account, by starting with TO.
6. The credit side of the Journal entry is to be posted on the debit side
of the account, by starting with BY.
Proforma for ledger:
LEDGER BOOK
Particulars account
Date
Particulars
Lfno
Amount
Date
Particulars
Lfno
amount
Date
Particulars
Lfno
amount
Date
Particulars
Lfno
amount
sales account
Date
Particulars
Lfno
Amount
cash account
Date
Particulars
Lfno
Amount
TRAIL BALANCE
The first step in the preparation of final accounts is the preparation of trail
balance. In the double entry system of book keeping, there will be credit for
182
kumaraswamireddy
Mighty mech
every debit and there will not be any debit without credit. When this principle
is followed in writing journal entries, the total amount of all debits is equal to
the total amount all credits.
A trail balance is a statement of debit and credit balances. It is prepared on a
particular date with the object of checking the accuracy of the books of
accounts. It indicates that all the transactions for a particular period have
been duly entered in the book, properly posted and balanced. The trail
balance doesnt include stock in hand at the end of the period. All
adjustments required to be done at the end of the period including closing
stock are generally given under the trail balance.
DEFINITIONS:
SPICER AND POGLAR :A trail balance is a list of all the
balances standing on the ledger accounts and cash book of a concern at any
given date.
J.R.BATLIBOI:
A trail balance is a statement of debit and credit balances extracted from the
ledger with a view to test the arithmetical accuracy of the books.
Thus a trail balance is a list of balances of the ledger accounts and cash book
of a business concern at any given date.
PROFORMA FOR TRAIL BALANCE:
Trail balance for MR as on
NO
NAME OF ACCOUNT
DEBIT
CREDIT
(PARTICULARS)
AMOUNT(RS.)
AMOUNT(RS.)
Trail Balance
Specimen of trial balance
1
Capital
Credit
Loan
Opening stock
Debit
Asset

183
kumaraswamireddy
Mighty mech
Purchases
Debit
Expense
Sales
Credit
Gain
Returns inwards
Debit
Loss
Returns outwards
Debit
Gain
Wages
Debit
Expense
Freight
Debit
Expense
Transport expenses
Debit
Expense
10
Royalities on production
Debit
Expense
11
Gas, fuel
Debit
Expense
12
Discount received
Credit
Revenue
13
Discount allowed
Debit
Loss
14
Bas debts
Debit
Loss
15
Dab debts reserve
Credit
Gain
16
Commission received
Credit
Revenue
17
Repairs
Debit
Expense
18
Rent
Debit
Expense
19
Salaries
Debit
Expense
20
Loan Taken
Credit
Loan
21
Interest received
Credit
Revenue
22
Interest paid
Debit
Expense
23
Insurance
Debit
Expense
24
Carriage outwards
Debit
Expense
25
Advertisements
Debit
Expense
26
Petty expenses
Debit
Expense
27
Trade expenses
Debit
Expense
28
Petty receipts
Credit
Revenue
29
Income tax
Debit
Drawings
30
Office expenses
Debit
Expense
31
Customs duty
Debit
Expense
32
Sales tax
Debit
Expense
33
Provision for discount on debtors
Debit
Liability
34
Provision for discount on creditors
Debit
Asset
35
Debtors
Debit
Asset
36
Creditors
Credit
Liability
37
Goodwill
Debit
Asset
38
Plant, machinery
Debit
Asset
39
Land, buildings
Debit
Asset
40
Furniture, fittings
Debit
Asset
41
Investments
Debit
Asset
42
Cash in hand
Debit
Asset
43
Cash at bank
Debit
Asset
44
Reserve fund
Credit
Liability

184
kumaraswamireddy
Mighty mech
45
Loan advances
Debit
Asset
46
Horse, carts
Debit
Asset
47
Excise duty
Debit
Expense
48
General reserve
Credit
Liability
49
Provision for depreciation
Credit
Liability
50
Bills receivable
Debit
Asset
51
Bills payable
Credit
Liability
52
Depreciation
Debit
Loss
53
Bank overdraft
Credit
Liability
54
Outstanding salaries
Credit
Liability
55
Prepaid insurance
Debit
Asset
56
Bad debt reserve
Credit
Revenue
57
Patents & Trademarks
Debit
Asset
58
Motor vehicle
Debit
Asset
59
Outstanding rent
Credit
Revenue

185
kumaraswamireddy
Mighty mech
FINAL ACCOUNTS
In every business, the business man is interested in knowing whether
the business has resulted in profit or loss and what the financial position of
the business is at a given time. In brief, he wants to know (i)The profitability
of the business and (ii) The soundness of the business.
The trader can ascertain this by preparing the final accounts. The final
accounts are prepared from the trial balance. Hence the trial balance is said
to be the link between the ledger accounts and the final accounts. The final
accounts of a firm can be divided into two stages. The first stage is preparing
the trading and profit and loss account and the second stage is preparing the
balance sheet.
TRADING ACCOUNT
The first step in the preparation of final account is the preparation of
trading account. The main purpose of preparing the trading account is to
ascertain gross profit or gross loss as a result of buying and selling the goods.
Trading account of MR. for the year ended
Particulars
Amount
Particulars
To opening stock
Xxxx
By sales
To purchases
xxxx
Less: returns
xx
Xxxx
To carriage inwards
Xxxx
To wages
Xxxx
To freight
Xxxx
To customs duty, octroi
Xxxx
Amount
xxxx
Less: returns xxx
Xxxx
By closing stock
Xxxx
To gas, fuel, coal,

Water
Xxxx
To factory expenses
To other man. Expenses
Xxxx
To productive expenses
Xxxx
To gross profit c/d

Xxxx
Xxxx
Xxxx

186
Xxxx
kumaraswamireddy
Mighty mech
Finally, a ledger may be defined as a summary statement of all the

transactions relating to
a person , asset, expense or income which have
taken place during a given period of time. The up-to-date state of any
account can be easily known by referring to the ledger.
PROFIT AND LOSS ACCOUNT
The business man is always interested in knowing his net income or net
profit.Net profit represents the excess of gross profit plus the other revenue
incomes over administrative, sales, Financial and other expenses. The debit
side of profit and loss account shows the expenses and the credit side the
incomes. If the total of the credit side is more, it will be the net profit. And if
the debit side is more, it will be net loss.
PROFIT AND LOSS A/C OF MR.FOR THE YEAR ENDED
PARTICULARS
AMOUNT
PARTICULARS
AMOUNT
TO office salaries
Xxxxxx
By gross profit b/d
Xxxxx
TO rent,rates,taxes
Xxxxx
Interest received
Xxxxx
TO Printing and stationery
Xxxxx
Discount received
Xxxx
Commission received
Xxxxx
TO Legal charges
Audit fee
Xxxx
Income
from
TO Insurance
Xxxx
investments
TO General expenses
Xxxx
Dividend on shares
Xxxx
TO Advertisements
Xxxxx
Miscellaneous
Xxxx
TO Bad debts
Xxxx
investments
TO Carriage outwards
Xxxx
Rent received
TO Repairs
Xxxx
TO Depreciation
Xxxxx
TO interest paid
Xxxxx
TO Interest on capital
Xxxxx
TO Interest on loans
Xxxx
TO Discount allowed
Xxxxx
TO Commission
Xxxxx
TO Net profit-------
Xxxxx
xxxx
(transferred to capital a/c)

xxxxxx
Xxxxxx
BALANCE SHEET
The second point of final accounts is the preparation of balance sheet. It is
prepared often in the trading and profit, loss accounts have been compiled
187
kumaraswamireddy
Mighty mech
and closed. A balance sheet may be considered as a statement of the financial

position of the concern at a given date.
DEFINITION:
A balance sheet is an item wise list of assets, liabilities and
proprietorship of a business at a certain state.

J.R.botliboi: A balance sheet is a statement with a view to measure exact
financial position of a business at a particular date.
Thus, Balance sheet is defined as a statement which sets out the assets and
liabilities of a business firm and which serves to as certain the financial
position of the same on any particular date. On the left-hand side of this
statement, the liabilities and the capital are shown. On the right-hand side all
the assets are shown. Therefore, the two sides of the balance sheet should be
equal. Otherwise, there is an error somewhere.
BALANCE SHEET OF AS ON .
Liabilities and capital
Amount
Assets
Amount
Creditors
Xxxx
Cash in hand
Xxxx
Bills payable
Xxxx
Cash at bank
Xxxx
Bank overdraft
Xxxx
Bills receivable
Xxxx
Loans
Xxxx
Debtors
Xxxx
Mortgage
Xxxx
Closing stock
Xxxx
Reserve fund
Xxxx
Investments
Xxxx
Furniture and fittings
Xxxx
Capital
xxxxxx
Add:
Plats&machinery
Net Profit xxxx
Land & buildings

Patents,
-------
Less:
---------
Xxxx
Xxxx
Goodwill
--------
xxxx
tm
,copyrights
xxxxxxx
Drawings
Xxxx
Prepaid expenses
Xxxx
Outstanding incomes
Xxxx
Xxxx
Xxxx
XXXX
XXXX
Advantages: The following are the advantages of final balance .

1. It helps in checking the arithmetical accuracy of books of accounts.
2. It helps in the preparation of financial statements.
3. It helps in detecting errors.

188
kumaraswamireddy
Mighty mech
4. It serves as an instrument for carrying out the job of rectification of

entries.
5. It is possible to find out the balances of various accounts at one place.

189
kumaraswamireddy
Mighty mech
FINAL ACCOUNTS -- ADJUSTMENTS

We know that business is a going concern. It has to be carried on indefinitely.
At the end of every accounting year. The trader prepares the trading and
profit and loss account and balance sheet. While preparing these financial
statements, sometimes the trader may come across certain problems .The
expenses of the current year may be still payable or the expenses of the next
year have been prepaid during the current year. In the same way, the income
of the current year still receivable and the income of the next year have been
received during the current year. Without these adjustments, the profit
figures arrived at or the financial position of the concern may not be correct.
As such these adjustments are to be made while preparing the final accounts.
The adjustments to be made to final accounts will be given under the Trial
Balance. While making the adjustment in the final accounts, the student
should remember that every adjustment is to be made in the final accounts
twice i.e. once in trading, profit and loss account and later in balance sheet
generally. The following are some of the important adjustments to be made
at the time of preparing of final accounts:1. CLOSING STOCK :(i)If closing stock is given in Trail Balance: It should be shown only in the
balance sheet Assets Side.
(ii)If closing stock is given as adjustment :
1. First, it should be posted at the credit side of Trading Account.
2. Next, shown at the asset side of the Balance Sheet.
2.OUTSTANDING EXPENSES :(i)If outstanding expenses given in Trail Balance: It should be only on the
liability side of Balance Sheet.
(ii)If outstanding expenses given as adjustment :
1. First,
it
should
be
added
to
the
concerned
expense
debit side of profit and loss account or Trading Account.

2. Next, it should be added at the liabilities side of the
Balance Sheet.
3.PREAPID EXPENSES :-

190
at
the
kumaraswamireddy
Mighty mech
(i)If prepaid expenses given in Trial Balance: It should be shown only in

assets side of the Balance Sheet.
(ii)If prepaid expense given as adjustment
1. First, it should be deducted from the concerned expenses at the debit

side of profit and loss account or Trading Account.
2. Next, it should be shown at the assets side of the Balance Sheet.
4.INCOME EARNED BUT NOT RECEIVED [OR] OUTSTANDING INCOME [OR]
ACCURED INCOME :(i)If incomes given in Trial Balance: It should be shown only on the assets
side of the Balance Sheet.
(ii)If incomes outstanding given as adjustment:
1. First, it should be added to the concerned income at the credit side of
profit and loss account.
2. Next, it should be shown at the assets side of the Balance sheet.
5. INCOME RECEIVED IN ADVANCE: UNEARNED INCOME:(i)If unearned incomes given in Trail Balance : It should be shown only on the
liabilities side of the Balance Sheet.
(ii)If unearned income given as adjustment
1. First, it should be deducted from the concerned income in the credit

side of the profit and loss account.
2. Secondly, it should be shown in the liabilities side of the
Balance Sheet.
6.DEPRECIATION:(i)If Depreciation given in Trail Balance: It should be shown only on the debit
side of the profit and loss account.
(ii)If Depreciation given as adjustment
1. First, it should be shown on the debit side of the profit and loss
account.
2. Secondly, it should be deduced from the concerned asset in the
Balance sheet assets side.
7.INTEREST ON LOAN [OR] CAPITAL :-

191
kumaraswamireddy
Mighty mech
(i)If interest on loan (or) capital given in Trail balance
:It should be shown
only on debit side of the profit and loss account.
(ii)If interest on loan (or)capital given as adjustment :

1. First, it should be shown on debit side of the profit and loss
account.
2. Secondly, it should added to the loan or capital in
the liabilities side of the Balance Sheet.
8.BAD DEBTS:(i)If bad debts given in Trail balance :It should be shown on the debit side of
the profit and loss account.
(ii)If bad debts given as adjustment:
1. First, it should be shown on the debit side of the profit and loss
account.
2. Secondly, it should be deducted from debtors in the assets side of the
Balance Sheet.
9.INTEREST ON DRAWINGS :(i)If interest on drawings given in Trail balance: It should be shown on the
credit side of the profit and loss account.
(ii)If interest on drawings given as adjustments :
1. First, it should be shown on the credit side of the profit and loss
account.
2. Secondly, it should be deducted from capital on liabilities
side of the Balance Sheet.
10.INTEREST ON INVESTMENTS :(i)If interest on the investments given in Trail balance :It should be shown on
the credit side of the profit and loss
account.
(ii)If interest on investments given as adjustments
1. First, it should be shown on the credit side of the profit and loss
account.

192
kumaraswamireddy
Mighty mech
2. Secondly, it should be added to the investments on assets side of the

Balance Sheet.
Note: Problems to be solved on final accounts
SUBSIDIARY BOOKS
In a small business concern, the numbers of transactions are limited. These
transactions are first recorded in the journal as and when they take place.
Subsequently, these transactions are posted in the appropriate accounts of
the ledger. Therefore, the journal is known as Book Of Original Entry or
Book of Prime Entry while the ledger is known as main book of accounts.
On the other hand, the transactions in big concern are numerous and
sometimes even run into thousands and lakhs. It is inconvenient and time
wasting process if all the transactions are going to be managed with a
journal.
Therefore, a convenient device is made. Smaller account books known as
subsidiary books or subsidiary journals are disturbed to various sections of
the business house. As and when transactions take place, they are recorded
in these subsidiary books simultaneously without delay. The original journal
(which is known as Journal Proper) is used only occasionally to record those
transactions which cannot be recorded in any of the subsidiary books.
TYPES OF SUBSIDIARY BOOKS:-- Subsidiary books are divided into eight
types. They are,
1.Purchases Book
2.Sales Book
3.Purchase Returns Book
4.Sales Returns Book
5.Cash Book
6.Bills Receivable Book
7.Bills Payable Book
8.Journal Proper
1. PURCHASES BOOK :- This book records all credit purchases only. Purchase
of goods for cash and purchase of assets for cash. Credit will not be recorded
in this book. Purchases book is otherwise called Purchases Day Book,
Purchases Journal or Purchases Register.
2. SALES BOOK
:-This book is used to record credit sales only. Goods are
sold for cash and sale of assets for cash or credit will not be recorded in this
193
kumaraswamireddy
Mighty mech
book. This book is otherwise called Sales Day Book, Sales Journal or Sales
Register.
3.PURCHASE RETURNS BOOK :- This book is used to record the particulars of
goods returned to the suppliers .This book is otherwise called Returns
Outward Book.
4.SALES RETURNS BOOK :- This book is used to record the particulars of
goods returned by the customers. This book is otherwise called Returns
Inward Book.
5.CASH BOOK :- All cash transactions , receipts and payments are recorded
in this book. Cash includes cheques, money orders etc.
6.BILLS REECEIVABLE BOOK :- This book is used to record all the bills and
promissory notes are received from the customers.
7.BILLS PAYABLE BOOK
:- This book is used to record all the bills or
promissory notes accepted to the suppliers.

8.JOURNAL PROPER :- This is used to record all the transactions that cannot
be recorded in any of the above mentioned subsidiary books.
FORMAT FOR PURCHASE BOOK
Date
Name of supplier
Invoice
Lf no
Details
Amount(Rs.)
Lf no
Details
Amount(Rs.)
Lf no
Details
Amount(Rs.)
No
FORMAT FOR SALES BOOK

Date
Name of customer
Invoice
No
FORMAT FOR PURCHASE RETURNS BOOK

Date
Name of supplier
Debit

194
kumaraswamireddy
Mighty mech
note
No
FORMAT FOR SALES RETURNS BOOK

Date
Name of supplier
Credit
Lf no
Details
Amount(Rs.)
note
No
CASH BOOK
Cash book plays an important role in accounting. Whether transactions made
are in the form of cash or credit, final statement will be in the form of receipt
or payment of cash. So, every transaction finds place in the cash book finally.
Cash book is a principal book as well as the subsidiary book. It is a book of
original entry since the transactions are recorded for the first time from the
source of documents. It is a ledger in a sense it is designed in the form of
cash account and records cash receipts on the debit side and the cash
payments on the credit side. Thus, a cash book fulfils the functions of both a
ledger account and a journal.
Cash book is divided into two sides. Receipt side (debit side) and payment
side (credit side). The method of recording cash sample is very simple. All
cash receipts will be posted on the debit side and all the payments will be
recorded on the credit side.
Types of cash book: cash book may be of the following types according to the
needs of the business.
Simple cash book
Double column or two column cash book
Three column cash book
Petty cash book
SINGLE COLUMN CASH BOOK: The simple cash book is a record of only
cash transactions. The model of the cash book is given below.

195
kumaraswamireddy
Mighty mech
CASH BOOK
Date
Partic
Lf no
Amount
Date
Particulars
Lf no
ulars
Amo
unt
TWO COLUMN CASH BOOK: This book has two columns on each side one for
discount and the other for cash. Discount column on debit side represents
loss being discount allowed to customers. Similarly, discount column on credit
side represents gain being discount received.
Discount may be two types.

(i)Trade discount
(ii)cash discount
TRADE DISCOUNT: when a retailer purchases goods from the wholesaler, he

allows some discount on the catalogue price. This discount is called as Trade
discount. Trade discount is adjusted in the invoice and the net amount is
recorded in the purchase book. As such it will not appear in the book of
accounts.
CASH DISCOUNT: When the goods are purchased on credit, payment will be
made in the future as agreed by the parties. If the amount is paid early as
promptly a discount by a way of incentive will be allowed by the seller to the
buyer. This discount is called as cash discount. So cash discount is the
discount allowed by the seller to encourage prompt payment from the buyer.
Cash discount is entered in the discount column of the cash book. The
discount recorded in the debit side of the cash book is discount allowed. The
discount recorded in the credit side of the cash book is discount received.
CASH DISCOUNT COLUMN CASH BOOK
Date
particulars
Lf no
Disc.
cash
Date
Allo
wed
196
Particulars
Lf
Disc
No
Recei
Ved.
cash
kumaraswamireddy
Mighty mech
PETTY CASH BOOK: We have seen that all the cash receipts and payments
will be recorded in the cash book. But in the case of big concerns if all
transactions like postage, cleaning charges, etc., are recorded in the cash
book, the cash book becomes bulky and un wieldy. So, all petty disbursement
of cash is recorded in a separate cash book called petty cash book.
Note: Problems to be solved on subsidiary books

197
kumaraswamireddy
Mighty mech
UNIT - VIII
FINANCIAL ANALYSIS THROUGH RATIOS
Ratio Analysis
Absolute figures are valuable but they standing alone convey no meaning
unless compared with another. Accounting ratio show inter-relationships
which exist among various accounting data. When relationships among
various accounting data supplied by financial statements are worked out, they
are known as accounting ratios.
Accounting ratios can be expressed in various ways such as:
1. a pure ratio says ratio of current assets to current liabilities is 2:1 or
2. a rate say current assets are two times of current liabilities or
3. a percentage say current assets are 200% of current liabilities.
Each method of expression has a distinct advantage over the other the
analyst will selected that mode which will best suit his convenience and
purpose.
Uses or Advantages or Importance of Ratio Analysis
Ratio Analysis stands for the process of determining and presenting the
relationship of items and groups of items in the financial statements. It is an
important technique of financial analysis. It is a way by which financial
stability and health of a concern can be judged. The following are the main
uses of Ratio analysis:
(i) Useful in financial position analysis: Accounting reveals the financial
position of the concern. This helps banks, insurance companies and
other financial institution in lending and making investment decisions.
(ii) Useful in simplifying accounting figures: Accounting ratios simplify,
summaries and systematic the accounting figures in order to make them
more understandable and in lucid form.
(iii) Useful in assessing the operational efficiency: Accounting ratios helps
to have an idea of the working of a concern. The efficiency of the firm
becomes evident when analysis is based on accounting ratio. This helps
the management to assess financial requirements and the capabilities of
various business units.

198
kumaraswamireddy
Mighty mech
(iv) Useful in forecasting purposes: If accounting ratios are calculated for

number of years, then a trend is established. This trend helps in setting up
future plans and forecasting.
(v) Useful in locating the weak spots of the business: Accounting ratios
are of great assistance in locating the weak spots in the business even
through the overall performance may be efficient.
(vi) Useful in comparison of performance: Managers are usually interested
to know which department performance is good and for that he compare
one department with the another department of the same firm. Ratios also
help him to make any change in the organisation structure.
Limitations of Ratio Analysis: These limitations should be kept in mind
while making
use of
ratio
analyses
for
interpreting
the
financial
statements. The following are the main limitations of ratio analysis.

1. False results if based on incorrect accounting data: Accounting ratios
can be correct only if the data (on which they are based) is correct.
Sometimes, the information given in the financial statements is
affected by window dressing, i. e. showing position better than what
actually is.
2. No idea of probable happenings in future: Ratios are an attempt to
make an analysis of the past financial statements; so they are
historical documents. Now-a-days keeping in view the complexities of
the business, it is important to have an idea of the probable
happenings in future.
3. Variation in accounting methods: The two firms results are comparable
with the help of accounting ratios only if they follow the some
accounting methods or bases. Comparison will become difficult if the
two concerns follow the different methods of providing depreciation or
valuing stock.
4. Price level change: Change in price levels make comparison for various
years difficult.
5. Only one method of analysis: Ratio analysis is only a beginning and
gives just a fraction of information needed for decision-making so, to
have a comprehensive analysis of financial statements, ratios should
be used along with other methods of analysis.
6. No common standards: It is very difficult to by down a common
standard for comparison because circumstances differ from concern to
concern and the nature of each industry is different.
7. Different meanings assigned to the some term: Different firms, in
order to calculate ratio may assign different meanings. This may affect
199
kumaraswamireddy
Mighty mech
the calculation of ratio in different firms and such ratio when used for
comparison may lead to wrong conclusions.
8. Ignores qualitative factors: Accounting ratios are tools of quantitative
analysis only. But sometimes qualitative factors may surmount the
quantitative aspects. The calculations derived from the ratio analysis
under such circumstances may get distorted.
9. No use if ratios are worked out for insignificant and unrelated figure:
Accounting ratios should be calculated on the basis of cause and effect
relationship. One should be clear as to what cause is and what effect is
before calculating a ratio between two figures.
Ratio Analysis: Ratio is an expression of one number is relation to another. It
is one of the methods of analyzing financial statement. Ratio analysis facilities
the presentation of the information of the financial statements in simplified
and summarized from. Ratio is a measuring of two numerical positions. It
expresses the relation between two numeric figures. It can be found by
dividing one figure by another ratios are expressed in three ways.
1. Jines method
2. Ratio Method
3. Percentage Method
Classification of ratios: All the ratios broadly classified into four types due to
the interest of different parties for different purposes. They are:
1. Profitability ratios
2. Turn over ratios
3. Financial ratios
4. Leverage ratios
1. Profitability ratios: These ratios are calculated to understand the profit
positions of the business. These ratios measure the profit earning
capacity of an enterprise. These ratios can be related its save or capital
to a certain margin on sales or profitability of capital employ. These
ratios are of interest to management. Who are responsible for success
and growth of enterprise? Owners as well as financiers are interested
in profitability ratios as these reflect ability of enterprises to generate
return on capital employ important profitability ratios are:
Profitability ratios in relation to sales: Profitability ratios are almost
importance of concern. These ratios are calculated is focus the end
results of the business activities which are the sole eritesiour of overall
efficiency of organisation.
gross profit
Nest sales

200
kumaraswamireddy
Mighty mech
1. Gross profit ratio: x 100

Note: Higher the ratio the better it is
2. Net profit ratio:
Net profit after interest & Tax

Net sales
X 100

3. Operating ratio (Operating expenses ratio)
Cost of goods sold + operating exenses

X 100
Net sales
Net: Lower the ratio the better it is
4. Operating profit ratio:
Operating profit
X 100 = 100 operating ratio
Net sales
Note: Higher the ratio the better it is cost of goods sold= opening stock +
purchase + wages + other direct expenses- closing stock (or) sales
gross profit.
Operating expenses:
= administration expenses + setting, distribution expenses operating
profit= gross profit operating expense.
Expenses ratio =
concern expense
X 100
Net sales
Note: Lower the ratio the better it is

Profitability ratios in relation to investments:
1. Return on investments:
Net profit after tax & latest depreciation

X 100
share holders funds
Share holders funds = equity share capital + preference share capital +

receives & surpluses +undistributed profits.
2.
X 100
Return
Net Profit after tax & interest - preference divident

on
equity
capital:
equity share capital

201
kumaraswamireddy
Mighty mech
Net profit after tax - preferecne divident

No. of equity shares
operating profit
4. Return on capital employed =
x 100
capital employed
N. P. after tax and interest
5. Return on total assets =
Total Assets
3. Earnings per share=
Here, capital employed = equity share capital + preference share capital +

reserves & surpluses + undistributed profits + debentures+ public deposit
+ securities + long term loan + other long term liability factious assets
(preliminary expressed & profit & loss account debt balance)
II. Turn over ratios or activity ratios:
These ratios measure how efficiency the enterprise employees the resources
of assets at its command. They indicate the performance of the business. The
performance if an enterprise is judged with its save. It means ratios are also
laced efficiency ratios.
These ratios are used to know the turn over position of various things in the
___________. The turnover ratios are measured to help the management in
taking the decisions regarding the levels maintained in the assets, and raw
materials and in the funds. These ratio s are measured in ratio method.
1. Stock turnover ratio =
Here,
Average stock=
cost of goods sold

average stock
opening stock + closing stock

2
Note: Higher the ratio, the better it is
sales
working capital
2. Working capital turnover ratio =
Note: Higher the ratio the better it is working capital = current assets
essential liabilities.
3. Fixed assets turnover ratio =
sales
fixed assets
Note: Higher the ratio the better it is.

3 (i) Total assets turnover ratio is :
sales
total assets
Sales
Capital employed

202
kumaraswamireddy
Mighty mech
4. Capital turnover ratio=

5. Debtors turnover ratio=
credits sales or sales

average debtors
5(i)= Debtors collection period=
Here,
Average debtors =
365 (or) 12
Turnove ratio
opening debitors + closing bebtors

2
Debtors = debtors + bills receivable

6. Creditors turnover ratio =
credit purchasers or purchases

average credetors
6 (i) creditors collection period=

Here,
Average creditor=
365 (or) 12
Creditor turnover ratio
opening + closing credetors

2
Creditors = creditors + bills payable.

Note: lower the ratio the better it is.
3. Financial ratios or liquidity ratios:
Liquidity refers to ability of organisation to meet its current obligation. These
ratios are used to measure the financial status of an organisation. These
ratios help to the management to make the decisions about the maintained
level of current assets & current libraries of the business. The main purpose
to calculate these ratios is to know the short terms solvency of the concern.
These ratios are useful to various parties having interest in the enterprise
over a short period such parties include banks. Lenders, suppliers,
employees and other.
The liquidity ratios assess the capacity of the company to repay its short term
liabilities. These ratios are calculated in ratio method.
203
kumaraswamireddy
Mighty mech
current assets
current liabilities
Current ratio =
Note: The ideal ratio is 2:1

i. e., current assets should be twice. The current liabilities.
quick assets
current liabilities
Quick ratio or liquid ratio or acid test ratio:
Quick assets = cash in hand + cash at bank + short term investments +

debtors
+ bills receivables short term investments are also known as
marketable securities.
Here the ideal ratio is 1:1 is, quick assets should be equal to the current
liabilities.
Absolute liquid ratio=
Here,
absolute liquid assets

current liabilities
Absolute liquid assets=cash in hand + cash at bank + short term investments

+ marketable securities.
Here, the ideal ratio is 0,0:1 or 1:2 it, absolute liquid assets must be half of
current liabilities.
Leverage ratio of solvency ratios: Solvency refers to the ability of a business
to honour long item obligations like interest and installments associated with
long term debts. Solvency ratios indicate long term stability of an enterprise.
These ratios are used to understand the yield rate if the organisation.
Lenders like financial institutions, debenture, holders, banks are interested in
ascertaining solvency of the enterprise. The important solvency ratios are:
1. Debt equity ratio=
outsiders funds
share holders funds
Debt
Equity
Here,
Outsiders funds = Debentures, public deposits, securities, long term bank
loans + other long term liabilities.
Share holders funds = equity share capital + preference share capital +
reserves & surpluses + undistributed projects.
The ideal ratio is 2:1
2. Preprimary ratio or equity ratio=
share holder funds

total assets

204
kumaraswamireddy
Mighty mech
The ideal ratio is 1:3 or 0.33:1

3. Capital greasing ratio:
=
Here,
(equity share capital + reserves & surplusses + undistributed projects)

(Outsiders funds + preference share capital )
higher gearing ratio is not good for a new company or the company in which
future earnings are uncertain.
11. Debt to total fund ratio=
outsiders funds
capital employed
Capital employed= outsiders funds + share holders funds =
debt + equity.
The ideal ratio is 0.6.7 :1 or 2:3

QUIZ
1. A companys return on investment indicates its ____.

)
(a) Solvency
(b) Stock turnover
(c) Profitability
(d) Debtors collection
2. Which would a business be most likely to use its solvency
(
(a) Gross profit ratio
(c) Debt Equity ratio
(b) Debtors collection period

(d) Current ratio
3. Higher Assets turnover ratio explains ____.

(
)
(a) More profitability
(b) Higher sales turnover
(c) Better utilization of assets
(d) large liability base
4. Which of the following measures companys liquidity position
(
)
(a) Stock Turnover ratio
(b) Debtors collection period
(c) Current ratio
(d) Net profit ratio
5. The difference between current assets and current liabilities is called___.
(
)
(a) Cost of goods sold
(b) Outsiders funds
(c) Working capital
(d) Shareholders funds
6. Debtors is a current asset, where as creditors is ________.
(
)
(a) Fixed Asset
(b) Fixed Liability
(c) Current Liability
(d) Long-term Liability
7. What is the Desirable current Ratio ______?
(
)
205
(a) 1:2
(b) 3:2
kumaraswamireddy
(c) 2:1
Mighty mech
(d) 1:1
8. Long-term stability of an enterprise indicates by ____ ratios.

(
)
(a) Liquidity
(b) Profitability
(c) Solvency
(d) Turnover
9. The Liquidity ratios assess the capacity of the company to repay
(
Its_____________ Liability.
)
(a) Long-term
(c) Solvency
(b) Profitability
(d) Turnover
10. In which Book-keeping system, business transactions are recorded as

two separate accounts at the same time?
)
(a) Single entry
(b) Triple entry
(c) Double entry
(d) None
11. In which Concept Business is treated separate from the Proprietor?
(
(a) Cost concept
(c) Business entity concept
(b) Dual aspect concept

(d) Matching concept
12. When a deduction allowed from the gross or catalogue price to traders;
then it is called as ____.
(
)
(a) Cash discount
(b) Credit discount
(c) Trade discount
(d) None
13. Out standing wages is treated as _________.
(
)
(a) Asset
(b) Expense
(c) Liability
(d) Income
14. How many types of accounts are maintained to record all types of
business transactions?
(
)
(a) Five
(b) four
(c) Three
(d) Two
15. Which connects the link between Journal and Trial Balance?
(
)
(a) Trading Account
(b) Profit & Loss account
(d) Balance sheet
(c) Ledger
16. Which assets can be converted into cash in short period?
(
)
(a) Fixed Assets
(b) Intangible Assets
(c) Current Assets
(d) Fictious Assets
17. Bank over draft is a ________.
(
)
(a) Asset
(b) Expense
(c) Liability
(d) Income
206
kumaraswamireddy
Mighty mech
18. Profit and Loss account is prepared to find out the business ____.
(
)
(a) Gross result
(c) Net result
(b) Financial position

(d) Liquidity position
19. The statement of Debit and credit balances of Ledger accounts

(
is called as _________.
)
(a) Journal
(c) Trial balance
(b) Ledger
(d) Balance sheet
20. _____ is a person who owes money to the firm.

(
)
(a) Creditor
(b) Owner
(c) Debtor
(d) Share holder
21. The statement reveals the financial positions of a business at any given
date is called __________.
(
)
(a) Trading account
(b) Profit and loss account
(c) Balance sheet
(d) Trial balance
22. ______ is called as Book of Original Entry.
(
)
(a) Ledger
(b) Trial Balance
(c) Journal
(d) Trading account
23. Debit what comes in; Credit what goes out is ____ account principle?
(
)
(a) Nominal
(b) Personal
(c) Real
(d) None
24. The process of entering transactions in to Ledge accounts known as __.
(
)
(a) Journal entry
(b) First entry
(c) Posting
(d) None
25. Debit Expenses and Losses; Credit Incomes and Gains is ___ account
Principle
(
)
(a) Personal
(b) Real
(c) Nominal
(d) None
26. Prepaid Insurance Premium is treated as _________.
(
)
(a) Gain
(c) Asset
(b) Income
(d) Liability

207
kumaraswamireddy
27. Acid Test Ratio is also called as ________.

(
)
(a) Current Ratio
(c) Quick Ratio
(b) Absolute Liquid Ratio

(d) Debt-Equity Ratio
28. The relationship between two numerical values is called as ____.

(
)
(a) Account
(c) Ratio
(b) Ledger
(d) Discount
29. Gross Profit can be found out by preparing _______.

(
)
(a) Profit and Loss account
(c) Trading account
(b) Balance sheet

(d) Trial balance
30. Net Profit can be found out by preparing _______.

(
)
(a) Trading account
(c) Profit and Loss account
(b) Trial balance

(d) Balance sheet

208
Mighty mech

Mefa PDF

Uploaded by

Document Informationclick to expand document informationmefa text book

Document Informationclick to expand document information

Copyright:

Available Formats

Mefa PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mefa PDF

Uploaded by

Copyright:

Available Formats

www.scrmechrocks.blogspot.

managed to enable it to achieve its desired goals. Management includes a

Management. Managerial Economics is also called as Industrial Economics

Meaning & Definition:

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

Nature of Managerial Economics

The other features of managerial economics are explained as below:

macroeconomics conditions of the economy are also seen as limiting

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

(d) Prescriptive actions: Prescriptive action is goal oriented. Given a

organizational behavior, sociology and etc.

managerial economics is based on certain assumption and as such

Scope of Managerial Economics:

of resource decisions made by all types

anticipation of the response of competitions the firms pricing, advertising and

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

Knowledge of capital theory can help very much in taking investment

B. Environmental or External Issues:

The environmental or external issues relate managerial economics to macro

Managerial economics relationship with other disciplines:

management theory and accounting techniques. Accounting refers to the

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

Managerial Economics requires a proper knowledge of cost and revenue

Mathematical symbols are more convenient to handle and understand various

4. Managerial Economics and Statistics:

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

7. Managerial Economics and Computer Science:

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

economics, has gained strength to be a separate branch of knowledge. It

represents any period exceeding one-year. He has to be ever alert to gauge

7. Managerial Economics is the study of allocation of resources available

(c) Managerial Economics

9. Managerial Economics is close to_________Economics

(b) Accounting activity

Note: Answer is C for all the above questions.

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

Factors Affecting Demand:

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

substitutes. The change in price of a substitute has effect on a

in the same direction in which price changes. The rise in price of

the demand for tea;

such cases complementary goods have opposite relationship between

amounts demanded of related commodities is called Cross Demand.

4. Tastes of the Consumers:

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

Increase in population increases demand for necessaries of life. The

10. State of business:

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

In-elastic demand: If a big change in price is followed by a small change in

Types of Elasticity of Demand:

-----Proportionate change in the price of commodity

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

C. Relatively elastic demand:

MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS

When price falls from OP to OP, amount demanded in crease from OQ to