Professional Documents
Culture Documents
Embossed Brochuer
Embossed Brochuer
BRICKS
UNPOLISHED
A texture resembling an arrangement brick wall which can finished to a natural brick finish, fly ash bricks &
even Terracotta bricks texture. The best application is in wall & back drop cladding for that authentic feel.
STONES
UNPOLISHED
A texture resembling natural rough cut stones slab arrangement which can finished to a Sand Stone,
Terracotta or even granite texture. The best application is in wall & back drop cladding for that authentic feel.
1
E G Y P TA
GOLD FINISH
UNPOLISHED
COPPER FINISH
Egypta from the exotic era of the Pharaohs & Sphinx from the land of the Blue Nile. The texture is best
finished in metallic distressed finish in Gold, Copper & Silver. Once finished it resembles a real metal
finish for Wall & Ceiling Cladding to furniture embellishments.
2
A texture resembling fading ripples which has wide finishing options. One can either finish it with a two
RIPPLES
tone quarter cut wood texture resembling Wenge, Oak, Ash & even Sapele or have a metallic antique
finish in Gold, Copper or even Silver. This can find application in back drops, pillar cladding & even
embellishments for furniture section.
BARK
OAK FINISH
UNPOLISHED
ZEBRANO FINISH
An authentic parallel deep grain finish resembling a peel off a tree bark which can be finished in rich dual
tones to resemble hardwoods like Zebrano, Oak & Teak. Ideal for shutter & door cladding or embellishment
of any furniture segment.Can also be applied as woody back drop for vertical structures.
4
CREPE
Another fine lined texture which resembles a quarter cut veneer resembling Wenge, Oak or even Beech. It
can be two tone polish wood grain finished resembling a quarter cut veneer. Ideal application in replacing
furniture embellishments.
5
N AT U R A
A flowery hardwood veneer texture which can be finished with dual tone to render Burma teak,
Mahogany, Oak or any dark flowery grained finish. Ideal for shutter & door cladding or embellishment of
any furniture segment.Can also be applied as woody back drop for vertical structures.
6
TRAX
Text Line on the Embossed HDF Brochure. An arrangement of straight parallelly set line resembling a
railway track hence the name. The product can be finish with dual colour metallic finish or high gloss dual &
single colour. Ideal application in wall & pillar cladding apart from furniture embellishments.
7
BAMBOO
A synchronised fluted texture resembling the construction of a Bamboo cell layout. It can be applied
horizontally or vertically polished with two tone natural wood grain or distressed metal finish in silver, gold
or copper. Best suited in cladding vertical structures or even furniture embellishments.
8
WEB
A cross mesh of straight lines which once polished with contrasting colour polish resembles decorative
lattice which is best suited for high lighter sections walls/backdrops & ceiling.
9
Authentic rich & deep crown textures resembling thick rough segments sized from hard woods. Can be finished
CROWN TEAK
with dual tone to render Burma teak, Mahogany, Oak or any dark flowery grained finish. Ideal application for wall
cladding, Cupboard & door shutters. It can be pressed on to a plywood, PB or MDF surface then cut to plank
width with chamfered edges rendering a gentle V Groove for authentic wooden plank finish.
10
CUBOID
A link of cubical chains on a peppered surface which can be polished with a metallic finished or a blood red
or dark chocolate with the raised cubical chain links finished in metallic gold or copper. Ideal for back drops
for partitions, walls & also for pillars. Embellishments of show cases, display units, retail structures.
11
FLORINA
The design resembles a flowery lattice work & can be polished with contrasting bright colours interlaced
with gold & copper lattice work shall give it a Royal finish. Best suited for vertical & horizontal structural
cladding for partitions, Back Drops & false ceilings.
12
PLUME
Plume as it traditionally means a Curls & Curves. The design is a series of exotically fluted curves when
polished with distressed metallic or glossy bright colour combination makes it an exquisite view. Ideally
suited for applications in cladding walls & ceilings, furniture embellishments & Shutter cladding.
13
VEINS
A horizontal arrangement of parallel wavy raised linesgiving a sense of continuity with a ripple effect. Best
effects can be achieved with metallic finish even with a distressed effect. Ideal for structural cladding
especially pillars & ceilings. Could also be applied as embellishment strips or as edge band for furniture.
14
A traditional feel of a over-under interwoven bamboo mat pattern with realistic striation of a bamboo strip
B A M B O O M AT
peeled off the surface. It can be finished either with dual tone coloured polish depicting a bamboo mat or a
metallic finish with contrasting tone to highlight the effect. Ideal for furniture embellishments, wall & ceiling
cladding.
15
GRILLZ
A design of parallel striations with fused end depicting a grill of a radiator a car. This can be finished with a
single metallic or solid colour finish for an artistic finish to either a wall, ceiling or could be used for the
embellishment of section of partitions or even furniture embellishments.
16
FLORA
The design element based on a delicate collection of floral impressions with stem & leaves on a fabric
meshed base. Can be polished with a solid coloured base with floral design in a contrasting or metallic
colour. Ideally application in wall cladding & partition panel insert cladding.
17
FIRE WORKS
A pattern depicting the bright burst of fireworks in the night sky which can be finished with polish
having a solid coloured base with a metallic finish to the fine burst lines as a relief. It could also be
finished with a all metallic polish. Ideal for wall cladding or to be used as relief section for partitions too.
18
CROSS CURVE
A random wipe out of curves crossing each other in an over-under interwoven pattern which can
be finished with a single metallic or solid colour finish for an artistic finish to either a wall, ceiling
or could be used for the embellishment of section of partitions.
19
FERN
A refreshing design of coniferous leaves intricately embossed with a subdued spine creates an ambience
of one close to & amidst nature. The effect of polish with solid coloured with the leaves in metallic makes
lends it an exotic yet a natural finish. Ideal for cladding of walls & ceilings.
20
VENIA
Venia is derived from the word Vines. A series of random spiral ended vines on an ethnic fabric base lends a
romantic feel. Can be polished with a solid coloured based depicting a fabric base with a metallic finish to the fine
exotic vines as a relief. Ideal for wall cladding or for the ceiling. It can also be used as relief section for partitions too.
21
22
23
Action Tesa Embossed on HDF sheet at its semi cure stage while other embossed designs are available on MDF sheet.
Action Tesa has more depth in Embossed HDF sheets and the depth is normally higher than 0.6mm whereas the others are just 0.2, 0.3mm. This results is a much
more beautiful panel on Tesa HDF.
Action Tesa uses European technology to make the Embossed Panels and all the Embossed Molds are imported from Europe with better Chrome Plating to give a
smoother and glossy finish on the surface and the sharpness in edges of Embossing is more in compare with Local panels available.
The density of the Tesa product is more than 850kg/m3 to ensure that consumption of paint is to be minimize while the other Embossed Panels consumes more
paint. The back side of our Embossed is having rough surface so that bonding is better when glue applied and fixed on any substrate.
All raw material being manufactured by Action Tesa itself while other manufacturers buy the MDF sheets from different channel, which resulting variation in quality.
Action Tesa used consistent quality of raw material to make it's Embossed Sheet.
Action tesa HDF Embossed Panels are ideally suitable for polishing, painting, PVC film pressing, membrane pressing etc.
Action Tesa is using DOME technology so the moisture content is distributed equally in panels while other panels having high moisture content & moisture is not
equally distributed, resulting more complaint. Action Tesa HDF Board which is being specially manufactured in-house with lot of wax so that the paint consumption is
much less as compared to any other panel available.
The molecular structure & IB in Tesa Panels is better than other Embossed Panels because Tesa is Embossing in semi cure (After the Mat formation) while other
panels give the Pressure on surface after the MDF get completely cure thus creating destruction in molecular structure.
Action Tesa has the widest range of more than 25 Designs.
Corporate Office: G - 11, Udyog Nagar, Main Rohtak Road, New Delhi - 110041
Land Line: 011 - 41120000 , 41120032 Fax: 011 - 25472907 E-mail: ho@actiontesa.com
www.actiontesa.com