Aoc 716vwy+service+manual

17 LCD Color Monitor
AOC 716Vwy
T77HRTNQMWAC8N
Service
Service
Service
Horizontal Frequency
55.5 kHz - 70.6 kHz
TABLE OF CONTENTS
Description
Page
Description
Page
Table Of Contents.............................................1
5.1.Software Flow Chart................13
Revision List...............................................2
5.2.Electrical Block Diagram..............16
Important Safety Notice................................3
6.Schematic...................................17
1.Monitor Specification......................................4
6.1.Main Board........................................................17
2.LCD Monitor Description.......5
6.2. Power Board..............................................22
3.Operation Instruction............................6
7.PCB Layout.........................................25
3.1.General Instructions.....................................6
7.1.Main Board..........................................25
3.2.Control Button..............................6
7.2.Power Board...............................................27
3.3.Adjusting the Picture.......................................7
7.3Key Board........................................28
4.Input/Output Specification........................9
8.Maintainability.........................................29
4.1.Input Signal Connector.............................9
8.1.Equipments and Tools Requirement...............29
4.2 Power Supply Requirement10
8.2.Trouble Shooting.....................................30
4.3.Factory Preset Display Modes.........................10
9.White-Balance Luminance adjustment......36
4.4.Panel Specification..........................11
10.Monitor Exploded View..........38
5.Block Diagram...................................13
11.BOM List.........................................................39
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
AOC 716Vwy
Revision List
Revision
Date
Revision History
TPV Model
A00
Jul.-13-07
First Version Release
T77HRTNQMWAC8N

Important Safety Notice
AOC 716Vwy
Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service
procedures recommended by AOC and described in this service manual are effective methods of performing service
operations. Some of these service operations require the use of tools specially designed for the purpose. The
special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in
order to minimize the risk of personal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not
recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics may create shock,
fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC.
AOC assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER:
DANGER-Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM.
CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF
THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit.
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to
the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment persons body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may
damage the panel.)

1. Monitor Specifications
AOC 716Vwy
Items
Descriptions
Driving system
TFT Color LCD
Type
HSD170MGW1-B00
Size
43.2cm (17")
Pixel pitch
0.255mm( H )x 0.255mm( V )
Viewable angle
160 (H) 160 (V) (TYPE)
Response time (type)
8 ms
LCD Panel
R,G,B Analog Interface

Video
Digital Interface
Connector
Input
15-pin D-Sub
Analog:0.7Vp-p(standard),
Video Signal
75 OHM, Positive
Sync. Type
H/V TTL
H-Frequency
55.5 kHz - 70.6 kHz
V-Frequency
60 Hz - 75 Hz
ON Mode
37W
OFF Mode
2W
Power Consumption
Contrast Ratio
600:1
Dot Clock
135 MHz
White Luminance
300cd/m
Max. Resolution
1440 x 900 (60 Hz)
Display Color
16.2M colors
Plug & Play
VESA DDC2B
Power Source
100~240VAC,47~63Hz
TM
Weight (monitor only) 3.1 kg

Environmental
Considerations
Regulations
Operating Temp: 5C to 35C

Storage Temp: -20C to 60C
Operating Humidity: 10% to 85%
CCC/cUL/FCC/CE/TCO03/RoHS

2. LCD Monitor Description
AOC 716Vwy
The LCD MONITOR will contain a main board, a power board and a key board which house the flat panel control
logic, brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips
each voltage.
Monitor Block Diagram
Flat Panel and
CCFL Drive.
CCFL backlight
Power Board
RS232 Connector
Main Board
For white balance
(Include: adapter, inverter)
adjustment in factory
mode
Key Board
Video signal, DDC
AC-IN
100V-240V
HOST Computer

3. Operating Instructions
AOC 716Vwy
3.1 General Instructions

Press the power button to turn the monitor on or off. The control buttons are located at front panel of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
-
The power cord should be connected.
Connect the video cable from the monitor to the video card.
Press the power button to turn on the monitor, the power indicator will light up.
3.2 Control Buttons
1. Auto Config
2. Eco Mode/ down
3. Up
4. Menu / Enter
5. Power Button & Indicator
AOC 716Vwy
3.3 Adjusting the Picture

OSD Settings
Press the MENU-button to activate the OSD window.
Press+ or - to navigate through the functions. Once the desired function is highlighted, press the
MENU-buttonto activate it.If the function selected has a sub-menu, press or again to navigate through the
sub-menu functions.Once the desired function is highlighted, press MENU-button to activate it.
Press+ or - to change the settings of the selected function. To exit and save, select the exit function. If you
want to adjust any other function, repeat steps 2-3.
OSD Lock Function: To lock the OSD, press and hold the MENUbutton while the monitor is off and then
press power button to turn the monitor on. To un-lock the OSD - press and hold the MENUbutton while the
monitor is off and then press power button to turn the monitor on.
Press Exit key continually for 7 sec. to turn on or off DDC-CI.
OSD functions
AOC 716Vwy

4. Input/output Specification
AOC 716Vwy
4.1 Input Signal Connector

D-SUB connector
DVI connector
AOC 716Vwy
4.2 Power Supply Requirement

A/C Line voltage range
: 100 V ~ 240 V
A/C Line frequency range
: 50 3Hz, 60 3Hz
Current
: TBD
Peak surge current
: < 55A peak at 240 VAC and cold starting
Leakage current
: < 3.5mA
Power line surge
: No advance effects (no loss of information or defect) with a

maximum of 1 half-wave missing per second
DC output Voltage
: 12VDC 5%
Current (max)
: 3.5 Amp (12V)
4.3. Factory Preset Display Modes
10
AOC 716Vwy
4.4. Panel Specification

HannStar Display model HSD170MGW1-B00 is a color active matrix thin film transistor(TFT) liquid crystal display
(LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a
driving circuit and a back light system. This TFT LCD has a 17.0 inch diagonally measured active display area with
XGA resolution (900 vertical by 1440 horizontal pixel array) and can display up to 16.2M (6-bit+FRC)colors.
4.4.1 Features
_ 17.0 WXGA+ for Monitor application
_ High Resolution: 1440*900
_ 2-ch LVDS interface system
_ LCD Timing Controller
_ Wide Viewing Angle
_ RoHS compliance
4.4.2 Display Characteristics
4.4.3 Electrical Characteristics

1. TFT LCD Module
11
AOC 716Vwy
2. Backlight Unit
4.4.4 Optical Characteristics

Measuring Condition
_ Measuring surrounding: dark room
_ Lamp current IBL: 7.50.1mA, lamp freq. FL=50 KHz, Inverter: TDK TBD315NR-1
_ VDD=5.0V, fV=60Hz
_ Ambient temperature: 252oC
_ 30min. Warm-up time.
12

5. Block Diagram
AOC 716Vwy
5.1 Software Flow Chat

1
3
N
5
Y
6
N
7
8
Y
N
1
11
Y
N
N
12
13
Y
N
14
15
Y
17
N
18
19
Y
13
16
AOC 716Vwy
1) MCU initialize.
2) Is the EPROM blank?
3) Program the EPROM by default values.
4) Get the PWM value of brightness from EPROM.
5) Is the power key pressed?
6) Clear all global flags.
7) Are the AUTO and SELECT keys pressed?
8) Enter factory mode.
9) Save the power key status into EPROM.
Turn on the LED and set it to green color.
Scalar initializes.
10) In standby mode?
11) Update the lifetime of back light.
12) Check the analog port, are there any signals coming?
13) Does the scalar send out an interrupt request?
14) Wake up the scalar.
15) Are there any signals coming from analog port?
16) Display "No connection Check Signal Cable" message. And go into standby mode after the message
disappear.
17) Program the scalar to be able to show the coming mode.
18) Process the OSD display.
19) Read the keyboard. Is the power key pressed?
14
AOC 716Vwy
5.2 Electrical Block Diagram

5.2.1 Main Board
X401
LCD Interface
Crystal
CN601
24MHz
U401
CLKOUT
U501
MCU
Scalar IC RTD2525LH
RTD2120L-LF
(Include ADC, OSD)
EPR_SDA
H sync
EPR_SCL
V sync
U403
Key Board Control
EEPROM
CN202
RGB
Digital
Video
Signal
AF24BC16
CN301
CN302
D-Sub
DVI
Connector
Connector
15
AOC 716Vwy
5.2.2 Inverter/Power Board
AC input
Bridge
Rectifier
and Filter
EMI filter
Rectifier
diodes
Transformer
Start Circuit: R904,R932,R933
CN902
5V
Feedback
PWM
Control IC
Circuit
12V
ON/OFF
Output
Circuit
MOSFET
Transformer
Lamp
Feedback
Circuit
Over
Voltage
PWM
Control IC
ON/OFF
Control
DIM
DIM
16
17" LCD Color Monitor

6. Schematic
AOC 716Vwy
6.1 Main Board
17
AOC 716Vwy
18
AOC 716Vwy
19
AOC 716Vwy
20
AOC 716Vwy
21
AOC 716Vwy
6.2 Power Board

100 1/4W R918
L904
100 1/4W R920

2
Q903
PMBS3904
D906
SP10100
3
C929
0.001uF
6
4
R961 100 1/4W
11
R915
R910
10 1/4W
ZD905
RLZ18B
LD7552BPS
100K 1/8W
1
+
C915
470uF/16V
67G215S4713KV
FUSE
R940
33K 1/10W
R924
150R 1/8W
1000uF/16V
67G215S1023KV
ZD922
RLZ5.1B
ZD921
RLZ13B
R927
3.6K 1% 1/10W
10K 1/8W
IC903
PC123X2Y FZOF
FB901
BEAD
R925
1K 1/8W
D916
D915
LL4148WP
LL4148WP
C924
0.1uF
2 L901 3
N.C
POWER X'FMR
Q901
2SK2645-54MR
R938
D907
NC
5
6
7
8
C939
D903 LL4148WP
RT
NC
VCC
CS
COMP VCC
GND OUT
12
R907
NC
IC901
4
3
2
1
C908
22uF/50V
67G215Y2207KT
R933
300K 1/4W
R909
5.1 1/4W
+5V
1.1uH
D901
FR103
6
1
F903
L903
C940
R962 100 1/4W

ZD906
RLZ22B
R939
NC
1
D905
SP1060
10
C905
0.1uF
ZD901
NC
680uF/25V
67G215D6814KV
C932
R935 100 1/4W
R943
1K 1/8W
1000pF
D900
FR107
R906
NC
C901
0.001uF/250V
0.1uF
1K 1/4W
C902
0.001uF/250V
100K 2W
061G152M10458F
7.0mH
C930
R946
1K 1/4W
R908
C906
1500pF/1KV
SG901 NC
R905
NC
R932
300K 1/4W
SG902 NC
C938
1500pF/1KV
1 L902 2
R904
300K 1/4W
C907
100uF/450V
67G 40z10115k
R944
+12V
ZD902
RLZ13B
T901
070606
C922
470uF25V
67G215D4714KV
C917C918
+
R941 R945
1K 1/4W
1K 1/4W
1.1uH
C912
0.001uF
100 1/4W R919

BD901
KBP208G
R912
1
220 1/4W
R926
1K 1/10W 1%
R914
0.47 2W
4.0mH
C928
10NF
R942
1K 1/10W 1%
IC904
KIA431A-AT/P
C909
470pF/25V
C903
0.47uF/275V
C925
R930
CN902
NC
C921
3300PF/250V
!
R900
R901
680K 1/4W
+5V
DIM
ON/OFF
R902
680K 1/4W
GND1
GND
680K 1/4W
VAR901
Varistor N.C
2.43K 1% 1/10W
C916
1
2
1
2
3
4
5
6
7
8
9
10
0.1uF
CONNECTOR
FG
095G801410D 51
HS2
HEAT SINK(D906)
NR901
NTCR
F901
FUSE
1
2
MUTE
HS3
HEAT SINK(Q901)
VOL
1
2
HS4
HEAT SINK
1
2
T P V ( Top

CN901
SOCKET
Key Component
Date
22
Victory
Electronics
Co . ,
Ltd. )
OEM MODEL IIY AMA 17W
G2545-1-X-X-6-070711TPV MODEL
01.POWER
Tuesday , July 17, 2007
PCB NAME
Sheet
PWPC721HSY1
715G2545 1B
2
of
Size
Rev
Custom
1.4
AOC 716Vwy
CN801
R821
C839
1000pF
6
T801
POWER X'FMR
7
R817
10K 1/10W
R855
33 1/4W
F801
D805
LL4148WP
3
4
+12V
2
1
1K 1/10W 1%
CONN
33G8020 2E F
C819
0.0022uF
070522
C801
15pF/3KV
3
1
0R05 1/4W
R804
100 1/8W
Q801
PMBS3904
C802
D810
470uF25V
NC 67G215D4714KV
C824
0.1uF
Q802
AM9945N-T1-PF
1
8
S
D
070522
Q808
PDTA144WK
2
R839
22R 1/8W
ON/OFF
C807
0.1uF/25V
Q804
PMBS3906
1
C825
0.1uF/25V
3
4
Q805
PDTC144WK
R856
33 1/4W
D801
BAV99
R801
1K 1/10W 1%
CN802
C838
1000pF
R822
2
1
5
R828
10K 1/10W
1K 1/10W 1%
CONN
33G8020 2E F
DIM
Q811
PMBS3904
R811
4.7K 1/10W
D807
LL4148WP
pin15
D802
BAV99
D811
NC
Q812
PMBS3906
1
ZD801
RLZ6.8B
Q810
RK7002
1
R814
1K 1/10W 1%
2
D813
LL4148WP
DTC
070522
C823
0.0022uF
R850
22R 1/8W
Q813
NC
3
R813
1K 1/10W
R827
1K 1/10W 1%
Q806
PMBS3904
R853
68K 1/10W
C835
NC
R857
NC
NC61G0805000
D817
LL4148WP
R841
68K 1% 1/10W
C842
R851
0.01uF
5K1 1/10W
R802
91K 1/10W
R829
22R 1/8W
R825
22R 1/8W
R837
47K 1/10W
R830
NC
C822
1uF/25V
R832
10K 1/10W
R807
10K 1/10W
IC801 56G 379 22

1
2
3
4
5
6
7
8
D812
LL4148WP
R823
0 1/10W
1IN+
2IN+
1IN2INFEEDBACK
REF
DTC OUTPUT CTRL
CT
VCC
RT
C2
GND
E2
C1
E1
16
15
14
13
12
11
10
9
R818
1K 1/10W 1%
D806
LL4148WP
TL494IDR
C821
0.1uF/25V
R820
10K 1/10W
R863
10K 1/10W
R831
1K 1/8W
R810
R865
51K
NC
C820
220pF
R861
NC
R864
NC
Q807
NC
R854
NC
Q809
RK7002
R826
1K 1/8W
R824
R803
10M 1/10W
R808
1K 1/10W 1%
C846
NC
1K 1/10W 1%
C817
NC
C845
2.2uF/16V
R862
1M 1/10W 5%
C834
0.1uF/25V
R835
1M 1/10W 5%
D814
LL4148WP
TPV
( Top
Victory
Electronics
Co . ,
Ltd. )
G2545-1-X-X-6-070625

K ey Component
Date
23
02.INVERTER
Wednesday , July 11, 2007

TPV MODEL
PCB NAME
Sheet
PWPC721HSY1
715G2545 1B
2
of
Size
Rev
Custom
1.4
AOC 716Vwy
0.47uF/16V
65G0603474 12
PVDD
0.47uF/16V
65G0603474 12
C101
8
C105
R105
10K 1/10W 5%
61G0603103
CN102
LIN+
LOUT+
LIN-
LOUT-
12
10
LOUT+
4
3
2
1
LOUT-
C106
4
PHONEJACK
88G 30214K DC
R108
C107
5
RIN+
ROUT+
RIN-
ROUT-
+5V
R101
10K 1/10W 5%
61G0603103
BY PASS
14
SHUTDOWN#
MUTE
+5V
VOLUME
R102
10K 1/10W 5%
61G0603103
VOL
R103
10K 1/10W 5%
61G0603103
12-29
modify
NC
PGND
18
PGND
C111
100pF
65G0603101 31
R107
5K1 1/10W
SE/BTL#
R106
5K1 1/10W
FADE#
AGND
1R 1/4W
C110
100pF
65G0603101 31
U101
56G 616 37
20
ROUT+
ROUT-
CONN
33G3802 4H
16
15
+
19
C108
1uF
67G215Y 1097NT
13
2007-05-22 change to
Elite
17
5
4
3
2
1
11
CN101
R104
10K 1/10W 5%
61G0603103
C103
VDD
C102
PVDD
C104
100uF25V
67G215Y 1014KT
+5V
C109
1uF/25V
65G0805105 22
FB102
1
2
BEAD
71G 55 9 T
T P V ( Top

Key Component
Date
24
Victory
Electronics
Co . ,
Ltd. )
G2545-1-X-X-6-070625TPV MODEL
03.AUDIO
Wednesday , July 11, 2007
PCB NAME
Sheet
PWPC721HSY1
715G2545 1B
4
of
Size
Rev
Custom
1.4

7. PCB Layout
AOC 716Vwy
7.1 Main Board
25
AOC 716Vwy
26
AOC 716Vwy
7.2 Power Board
27
AOC 716Vwy
7.3 Key Board
28
AOC 716Vwy
8. Maintainability
8.1 Equipments and Tools Requirement
1.
Voltmeter.
2.
Oscilloscope.
3.
Pattern Generator.
4.
DDC Tool with and Compatible Computer.
5.
Alignment Tool.
6.
LCD Color Analyzer.
7.
Service Manual.
8.
User Manual.
29
AOC 716Vwy
8.2 Trouble Shooting

8.2.1 Main Board
No power
No power
Press power key and look

if the picture is normal
NG
Please reinsert and make sure
the AC of 100-240 is normal
NG
OK
Reinsert or check the

Adapter/Inverter
section
Measure
U201 PIN2=3V,Q502(C)=1.8V
NG
Check U201,Q502
OK
X401 oscillate waveforms
are normal
OK
NG
Replace X401
Check U401
NG
Replace U401
OK
Replace U501
30
AOC 716Vwy
No picture (LED orange)
No picture
The button if
under control
OK
Measure U201 PIN2=3V, Q502(C)=1.8V
NG
Check U201,Q502
OK
X401 oscillate
waveform is normal
NG
Replace X401
OK
Check HS/VS from
CN301 is normal
NG
Check Correspondent
component
OK
Check U401
NG
Replace U401
OK
Replace U501
31
AOC 716Vwy
White screen
White screen
NG
Measure Q602 base
X401 oscillate
waveform is normal
is low level?
NG
OK
Replace X401
OK
Check Q601, Q602 is
Check reset circuit of
broken or CN601 solder?
U401 is normal
NG
NG
Check Correspondent
component.
Check Correspondent
component.
OK
OK
Replace U401
NG
Replace PANEL
OK
Replace U501
32
Replace U401
AOC 716Vwy
8.2.2 Power/Inverter Board

(1) No power
Check CN902 pin4 = 5V

NG
Check AC line volt 110V or 220V
OK
NG
Check AC input
Check the voltage of C907 (+)

NG
OK
Check bridge rectified circuit and F901 circuit
Check start voltage for the pin3 of IC901

NG
OK
Check R904, R932, R933 and Change IC901
Check the auxiliary voltage is bigger than

10V and smaller than 20V
OK
NG
1) Check IC901
2) Check IC901 over current protect circuit
Check IC901 pin8 PWM wave
OK
NG
Check D903,Q901 and change IC901
Check Q903, D906, D905, ZD902, ZD922, IC903IC904D907 and T901
33
AOC 716Vwy
2.) W / LED, No Backlight
Check F801= 12V
NG
Check adapter or MB
OK
Check ON/OFF signal
NG
Check Interface board
OK
Check IC801 pin12=5V
NG
Change ON/OFF
SINGLE
OK
Check IC801 PIN9/10 have the output of square wave at short

time
NG
Check IC801
OK
Check Q802 (G) wave
NG
Check Q801, Q804, Q811, Q812
OK
Check the output of PT801,
NG
Check PT801
OK
Check connecter & lamp
34
AOC 716Vwy
8.2.3 Key Board
OSD is unstable or not working
N
Connect Key Pad Board
Is Key Pad Board connecting normally?
Y
N
Replace Button Switch
Is Button Switch normally?
Y
N
Is Key Pad Board normally?
Check Main Board
35
Replace Key Pad Board
AOC 716Vwy
9. White- Balance, Luminance Adjustment

Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.
Before started adjust white balance , please set the Chroma-7120 MEM Channel 3 to Warm (6500K) color, MEM
Channel 4 to Normal (7300K) color, MEM Channel 9 to Cool (9300K) color , and MEM Channel 10 to sRGB color
2
( our Warm color parameter is x = 313 20, y = 329 20, Y=180cd/m ; Normal color parameter is x = 301 20, y =
2
317 20, Y=180cd/m ; Cool color parameter is x = 283 20, y = 297 20, Y=180cd/m ; sRGB color parameter is x
2
= 313 20, y = 329 20, Y= 180cd/m )

How to setting MEM channel you can reference to chroma 7120 user guide or simple use SC key and
NEXT Key to modify xyY value and use ID key to modify the TEXT
description Following is the procedure
to do white-balance adjust .
2. Setting the color temp. you want
A. MEM.CHANNEL 3 (Warm color):
Warm color temp. parameter is x = 313 20, y = 329 20, Y=180cd/ m
B. MEM.CHANNEL 4 (Normal color):

Normal color temp. parameter is x = 301 20, y = 317 20, Y=180cd/ m
C. MEM.CHANNEL 9 (Cool color):

Cool color temp. parameter is x = 283 20, y = 297 20, Y=180cd/m
D. MEM.CHANNEL 10 (sRGB color):

sRGB color temp. parameter is x = 313 20, y = 329 20, Y= 180cd/m
3. Into Factory mode of AOC 716Vwy:

Press the MENU button, pull out the power cord, and then plug the power cord. Then the factory OSD will be at the
left top of the panel.
4. Bias adjustment:
Set the Contrast
to 50; Adjust the Brightness
to 80.
5. Gain adjustment:
Move cursor to -F- and press MENU key
A. Adjust Warm (6500K) color-temperature
1. Switch the chroma-7120 to RGB-Mode (with press MODE button)
2. Switch the MEM.channel to Channel 3 (with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 313 20, y = 329 20, Y=180cd/m
4. Adjust the RED of color3 on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN of color3 on factory window until chroma 7120 indicator reachedthe value G=100
6. Adjust the BLUE of color3 on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4,5,6) until chroma 7120 RGB value meet the tolerance =1002
B. Adjust Normal (7300K) color-temperature
2. Switch the MEM.channel to Channel 4(with up or down arrow on chroma 7120)
C. Adjust Cool (9300K) color-temperature
1. Switch the Chroma-7120 to RGB-Mode (with press MODE button)
36
AOC 716Vwy
2. Switch the MEM. Channel to Channel 9 (with up or down arrow on chroma 7120)
5. Adjust the GREEN of color1 on factory window until chroma 7120 indicator reached the value G=100
D. Adjust sRGB color-temperature
2. Switch the MEM.channel to Channel 10 (with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 313 20, y = 329 20, Y= 180cd/m
E. Turn the Power-button off to quit from factory mode.
37
AOC 716Vwy
10.Monitor Exploded View
Item
38
Description
15
SCREW
14
HINGE
12
SCREW
11
SCREW
10
RUBBER FOOT
CABLE COVER
BASE
STAND
HINGE
REAR COVER
MAIN FRAME
KEY BUTTON
POWER LENS
BEZEL(17")
AOC 716Vwy
11. BOM List

T77HRTNQMWAC8N
Location
Part No.
Description
007G
COMPOUND PALLET
007G
5 10
COMPOUND PALLET
012G 394
RUBBER FOOT
026G 800504
BARCODE LABEL
040G 154501
HI-POT GND LABEL
040G 581 26646
EANCODE LABEL
044G3231 15
EVA WASHER
044G6000 4E
CARTON
045G
77500
BARCODE RIBBON
045G
77501
BARCODE RIBBON
052G
1174 2A
3M 69#
052G
1185
MIDDLE TAPE
052G
1185
052G
1186
SMALL TAPE
052G
1191
GLASS CLOTH
052G
1192
GLASS CLOTH
052G
1211
BIG TAPE
165MINIUM TAPE
070GHDCP500HDC
HDCP CODE
078G 322
SPEAKER 4 OHM 1.5W
089G 17356C554
AUDIO CABLE
089G 725CAA DB
D-SUB
089G179S30N 9A
FFC CABLE
089G402A15NIS1
POWER CORD
095G8014 6D 41
HARNESS 6P-6P 170MM
0M1G 130
5120
SCREW
0M1G 340
8 47 CR3
SCREW
0M1G1730
6120
SCREW
0Q1G 930 14 47 CR3
SCREW
0Q1G1030
SCREW
8120
L:260 MM 43X18MM
705GQ734327
STAND ASS'Y
0M1G1740 10225 CR3
SCREW
A34G0046 A5 3B
STAND
AQ1G1740 10 47 CR3
SCREW
750GLH70GWB12N
PANEL HSD170MGW1-B00 HSD
Q37G0055
HINGE
A15G0207
4 CKD
MAIN FRAME
A33G0030 GM 1L
CABLE COVER
A33G0171 GM 1L
KEY BUTTON
A33G0182
POWER LENS
1 1C
A34G0097 A5 1B
BASE 06S4
A34G0312 A5A1B
BEZEL L17W-7KH2
A34G0433 GMA8B
REAR COVER 17
39
AOC 716Vwy
AM1G1740 10 47 CR3
SCREW M3X6
CBPC7HRXAOQ8
CONVERSION BOARD
CN202
033G3802
WAFER
CN201
033G3802
WAFER 9P RIGHT ANELE PITCH
CN601
033G801930F CH
JS
CONNECTOR
040G 457624 1B
LABEL-CPU
040G 45762412B
CBPC LABEL
R507
061G152M339 64
CHIPR 3.3 OHM +-5% 2W
C405
067G 3151007KV
ELCAP 10UF M 50V 105 KINGNICHI
C202
067G 3151014KV
EC 105 CAP 100UF M 25V
C203
067G 3151014KV
C505
067G 3152207KV
ELCAP 22UF M 50V 105 KING NICHI
C604
067G 3154704KV
ELCAP 47UF M 25V 105 KINGNICHI
CN301
088G 35315F
D-SUB 15PIN
CN302
088G 35424F
DVI 24PIN CONN F
X401
093G
24MHZ/30PF/49US
U402
056G 158501
AZ431AN-A-E1
U501
056G 562180
IC RTD2525LH-GR QFN-48
U201
056G 585 4A
AP1117E33LA
U401
056G1125701
U403
056G1133 89
IC AF24BC16-SI 16K SOIC-8 APLUS
Q202
057G 417
PMBS3904/PHILIPS-SMT(04)
Q401
057G 417
Q301
057G 417
Q204
057G 417
Q205
057G 417
Q602
057G 417
Q501
057G 417 22
TRA KN2907AS -60V/-0.6A SOT-23
Q502
057G 417 22
TRA KN2907AS -60V/-0.6A SOT-23
Q601
057G 763
R302
061G0402000
RST CHIPR 0 OHM +-5% 1/16W
R429
061G0402000
R325
061G0402100
R324
061G0402100
R323
061G0402100
R322
061G0402100
R321
061G0402100
R320
061G0402100
R319
061G0402100
R318
061G0402100
R301
061G0402101
R303
061G0402101
R306
061G0402101
R308
061G0402101
R309
061G0402101
R311
061G0402101
22 45
IC MCU RTD2120L-LF REALTEK
A03401 SOT23 BY AOS(A1)
40
AOC 716Vwy
R312
061G0402101
R313
061G0402101
R315
061G0402101
R317
061G0402101
R420
061G0402101
R422
061G0402101
R430
061G0402101
R432
061G0402101
R433
061G0402101
R434
061G0402101
R435
061G0402101
R442
061G0402101
R508
061G0402101
R509
061G0402101
R408
061G0402101
R409
061G0402101
R410
061G0402101
R402
061G0402102
RST CHIPR 1 KOHM +-5% 1/16W
R423
061G0402102
R424
061G0402102
R453
061G0402102
R454
061G0402102
R503
061G0402102
R407
061G0402103
R406
061G0402103
R405
061G0402103
R438
061G0402103
R436
061G0402103
R425
061G0402103
R416
061G0402103
R404
061G0402103
R316
061G0402103
R210
061G0402103
R601
061G0402103
R213
061G0402103
R326
061G0402104
R208
061G0402121
RST CHIP 120R 1/16W 5%
R207
061G0402121
R201
061G0402201
R426
061G0402220
R428
061G0402220
R440
061G0402220
R441
061G0402220
R304
061G0402222
RST CHIPR 2.2 KOHM +-5% 1/16W
R305
061G0402222
R401
061G0402392
RST CHIP 3.9K 1/16W 5%

41
AOC 716Vwy
R403
061G0402392
R437
061G0402392
R202
061G0402472
R327
061G0402472
R411
061G0402472
R412
061G0402472
R443
061G0402472
R444
061G0402472
R445
061G0402472
R451
061G0402472
R605
061G0402472
R413
061G0402472
R414
061G0402472
R604
061G0402473
R439
061G0402682
RST CHIP 6K8 1/16W 5%
R431
061G0402682
R415
061G0402682
R307
061G0402750
R310
061G0402750
R314
061G0402750
R602
061G0805331
C401
065G0402100 31
CAP 0402 10PF J 50V NPO
C411
065G0402100 31
CAP 0402 10PF J 50V NPO
C602
065G0402103 22
CHIP 0.01UF 25V X7R
C404
065G0402104 15
MLCC 0402 0.1UF K 16V X5R
C603
065G0402104 15
C507
065G0402104 15
C506
065G0402104 15
C503
065G0402104 15
C501
065G0402104 15
C410
065G0402104 15
C406
065G0402104 15
C403
065G0402104 15
C317
065G0402104 15
C316
065G0402104 15
C315
065G0402104 15
C210
065G0402104 15
C209
065G0402104 15
C206
065G0402104 15
C205
065G0402104 15
C204
065G0402104 15
C201
065G0402104 15
C402
065G0402105 A5
CAP 0402 1UF K 10V X5R
C412
065G0402105 A5
CAP 0402 1UF K 10V X5R
C302
065G0402330 31
33PF +-50% 50V NPO
C303
065G0402330 31
33PF +-50% 50V NPO

42
AOC 716Vwy
C301
065G0402473 12
CHIP 0.047UF 16V X7R
C304
065G0402473 12
C306
065G0402473 12
C307
065G0402473 12
C309
065G0402473 12
C311
065G0402473 12
C305
065G0402509 31
CHIP 5PF 50V NPO
C308
065G0402509 31
CHIP 5PF 50V NPO
C310
065G0402509 31
CHIP 5PF 50V NPO
FB201
071G 56K121
CHIP BEAD
FB502
071G 56K121
CHIP BEAD
FB503
071G 56K121
CHIP BEAD
FB601
071G 56K121
CHIP BEAD
FB301
071G 59K190
19 OHM BEAD
FB302
071G 59K190
19 OHM BEAD
FB303
071G 59K190
19 OHM BEAD
FB304
071G1608151 5Y
CHIP BEAD 1608 150 OHM25%
FB305
071G1608151 5Y
FB401
071G1608151 5Y
FB501
071G1608151 5Y
D402
093G
64 42 PP
BAV70 SOT-23
D314
093G
6433S
DIODE BAV99 SEMTECH
D311
093G
6433S
DIODE BAV99 SEMTECH
D309
093G
6433S
DIODE BAV99 SEMTECH
D308
093G
6433S
DIODE BAV99 SEMTECH
D307
093G
6433S
DIODE BAV99 SEMTECH
D301
093G
6433S
DIODE BAV99 SEMTECH
D302
093G
6433S
DIODE BAV99 SEMTECH
D303
093G
6433S
DIODE BAV99 SEMTECH
D304
093G
6433S
DIODE BAV99 SEMTECH
D305
093G
6433S
DIODE BAV99 SEMTECH
D306
093G
6433S
DIODE BAV99 SEMTECH
D310
093G 39S 34
UDZS5.6B
D312
093G 39S 34
UDZS5.6B
D313
093G 39S 34
UDZS5.6B
D315
093G 39S 34
UDZS5.6B
ZD301
093G 39S 34
UDZS5.6B
ZD302
093G 39S 34
UDZS5.6B
ZD303
093G 39S 34
UDZS5.6B
ZD304
093G 39S 34
UDZS5.6B
ZD305
093G 39S 34
UDZS5.6B
ZD307
093G 39S 34
UDZS5.6B
D403
CN001
093G 64S522SEM
LL4148
715G2507
MAIN BOARD PCB
KEPC7QC8
KEY BOARD
033G3802 6H
WAFER 6P RIGHT ANGLE PITCH 2.0

43
AOC 716Vwy
SW003
077G 600
1GCJ
TACT SWITCH TSPB-2 -NP
SW002
077G 600
1GCJ
SW001
077G 600
1GCJ
SW005
077G 600
1GCJ
SW004
077G 600
1GCJ
LED001
081G
1 GP
LED GP32032M/R003-ZY-33
12
R003
061G0603182
R004
061G0603182
R005
061G0603302
R002
061G0603302
715G2528
KEY BOARD PCB
PWPC721HE4
POWER BOARD
CN102
033G3802 4H
WAFER 4P RIGHT ANGLE
CN801
033G8020 2E
CONNECTOR
CN802
033G8020 2E
CONNECTOR
040G 45762420A
LABEL 25X6MM
IC903
056G 139 3A
IC PC123Y22FZ0F
U101
056G 616 37
IC TPA6021A4NE4 2W*2 PDIP-20
061G
8 OHM NCT
NR901
58080 WT
C903
063G 10747410V
0.47UF 275VAC ARCO
C801
065G
15PF 5% CC45SL 3KV TDK
C902
065G305M1022BP
Y2 1000PF M 250VAC Y5P
C901
065G305M1022BP
Y2 1000PF M 250VAC Y5P
C921
065G306M3322BP
3300PF 20%
C907
067G 40Z10115K
CAP 105 100UF M 450V
C922
067G215D4714KV
E.C 105 CAP 470UF M 25V
ED SERIES
C802
067G215D4714KV
E.C 105 CAP 470UF M 25V
ED SERIES
C918
067G215D6814KV
CAP 105 680UF M 25V
C917
067G215D6814KV
CAP 105 680UF M 25V
C940
067G215S1023KV
105 1000UF M 16V
C939
067G215S1023KV
105 1000UF M 16V
C915
067G215S4713KV
L902
073G 174 65
LINE FILTER
T901
080GL17T 33 DN
XFMR FOR POWER DARFON
T801
080GL17T 40 DN
X'FMR TK.2001U.101
CN901
087G 501 32
AC SOCKET
CN101
088G 30214K DC
PHONE JACK 5PIN
BD901
093G
BRIDGE DIODE KBP208G LITEON
CN902
095G801410E 51
WIRE HARNESS
705GQ7 57001
Q901 ASS'Y
Q901
057G 724 11
STP9NK65ZFP
HS3
090G6263
HEAT SINK
0M1G1730
8128 CR3
SCREW
3J1506ET
50460 28
705GQ7 93001
HS4
090G6084
D905
093G
60278
D905 ASS'Y
GP
HEAT SINK
DIODE SP1060 ITO-220 SECOS
44
AOC 716Vwy
0M1G1730
R908
R914
8128 CR3
SCREW
705GQ761006
R908 ASS'Y
061G152M10458F
100K OHM 5% 2W
096G
TUBE
29
705GQ761007
R914 ASS'Y
061G152M478 64
0.47 OHM 5% 2W
096G
SHRINK TUBE UL/CSA
29
705GQ793036
D906 ASS'Y
HS2
090G6263
HEAT SINK
D906
093G
60267
0M1G1730
8128 CR3
SP10100
SCREW
IC801
056G 379 22
IC TL494IDR SOIC-16
IC901
056G 379 76
IC LD7552BPS SOP-8
Q801
057G 417
Q806
057G 417
Q811
057G 417
Q903
057G 417
Q812
057G 417
Q804
057G 417
Q809
057G 759
RK7002
Q810
057G 759
RK7002
Q808
057G 760 4B
PDTA144WK SOT346
Q805
057G 760 5B
PDTC144WK SOT346
Q802
057G 763 14
AM9945N
R823
061G0603000
R926
061G0603100 1F
R827
061G0603100 1F
R824
061G0603100 1F
R822
061G0603100 1F
R821
061G0603100 1F
R818
061G0603100 1F
R814
061G0603100 1F
R808
061G0603100 1F
R801
061G0603100 1F
R942
061G0603100 1F
R817
061G0603100 2F
R820
061G0603100 2F
R828
061G0603100 2F
R832
061G0603100 2F
R863
061G0603100 2F
R807
061G0603100 2F
R813
061G0603102
RST CHIP 1K 1/10W 5%
R105
061G0603103
R104
061G0603103
R103
061G0603103
R102
061G0603103

45
AOC 716Vwy
R101
061G0603103
R835
061G0603105
RST CHIPR 1 MOHM +-5% 1/10W
R862
061G0603105
R803
061G0603106
R930
061G0603243 1F
R940
061G0603330 2F
R927
061G0603360 1F
R811
061G0603472
RST CHIPR 4.7KOHM +-5% 1/10W
R851
061G0603510 1F
R107
061G0603512
R106
061G0603512
R841
061G0603680 2F
R853
061G0603683
R802
061G0603910 2F
RST CHIP 91K 1/10W 1%
R831
061G0805100 1F
RST CHIPR 1KOHM +-1% 1/8W
R915
061G0805100 3F
R804
061G0805101
R925
061G0805102
R943
061G0805102
R826
061G0805102
R938
061G0805103
10 KOHM 1/10W
R924
061G0805151
R825
061G0805220
22&8 1/10W
R829
061G0805220
22&8 1/10W
R839
061G0805220
22&8 1/10W
R850
061G0805220
22&8 1/10W
R837
061G0805473
R810
061G0805510 2F
F801
061G1206000
JR801
061G1206000
JR901
061G1206000
JR902
061G1206000
R910
061G1206100
R918
061G1206101
100 1206
R919
061G1206101
100 1206
R920
061G1206101
100 1206
R935
061G1206101
100 1206
R961
061G1206101
100 1206
R962
061G1206101
100 1206
R946
061G1206102
R945
061G1206102
R944
061G1206102
R941
061G1206102
R108
061G1206109
R912
061G1206221
R904
061G1206304
300 KOHM 1/8W

46
AOC 716Vwy
R932
061G1206304
300 KOHM 1/8W
R933
061G1206304
300 KOHM 1/8W
R855
061G1206330
R856
061G1206330
R909
061G1206519
RST CHIPR 5.1 OHM +-5% 1/4W
R900
061G1206684
R901
061G1206684
R902
061G1206684
C110
065G0603101 31
CER1 0603 NP0 50V 100P PM5 R
C111
065G0603101 31
CER1 0603 NP0 50V 100P PM5 R
C842
065G0603103 32
0.01UF +-10% 50V X7R
C807
065G0603104 22
CHIP 0.1UF 25V X7R
C821
065G0603104 22
CHIP 0.1UF 25V X7R
C825
065G0603104 22
CHIP 0.1UF 25V X7R
C834
065G0603104 22
CHIP 0.1UF 25V X7R
C819
065G0603222 22
CHIP 2200PF 25V X7R
C823
065G0603222 22
CHIP 2200PF 25V X7R
C101
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C102
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C103
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C105
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C106
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C107
065G0603474 12
MLCC 0603 0.47UF K 16V X7R
C839
065G0805102 31
1000PF 50V NPO
C932
065G0805102 31
1000PF 50V NPO
C838
065G0805102 31
1000PF 50V NPO
C928
065G0805103 32
10NF/50V/0805/X7R
C930
065G0805104 32
CHIP 0.1U 50V X7R
C924
065G0805104 32
CHIP 0.1U 50V X7R
C916
065G0805104 32
CHIP 0.1U 50V X7R
C905
065G0805104 32
CHIP 0.1U 50V X7R
C824
065G0805104 32
CHIP 0.1U 50V X7R
C822
065G0805105 22
CHIP 1UF 25V X7R 0805
C109
065G0805105 22
CHIP 1UF 25V X7R 0805
C820
065G0805221 31
220PF 50V NPO
C845
065G0805225 12
CHIP 2.2UF 16V X7R 0805
C909
065G0805471 21
CHIP 470PF 25V NPO
C912
065G1206102 72
CHIP 1000PF 500V X7R
C929
065G1206102 72
CHIP 1000PF 500V X7R
D801
093G
64 33
DIO SIG SM BAV99 (PHSE)R
D802
093G
64 33
DIO SIG SM BAV99 (PHSE)R
D813
093G
64 44
D916
093G
6432S
IN4148W
D915
093G
6432S
IN4148W
D903
093G
6432S
IN4148W
D817
093G
6432S
IN4148W
LL4148WP
47
AOC 716Vwy
D814
093G
6432S
IN4148W
D812
093G
6432S
IN4148W
D807
093G
6432S
IN4148W
D806
093G
6432S
IN4148W
D805
093G
6432S
IN4148W
ZD801
093G 39S 10
RLZ6.8B LLDS
ZD906
093G 39S 20
RLZ22B LLDS
ZD922
093G 39S 25
RLZ5.1B LLDS
ZD902
093G 39S 40
RLZ 13B LLDS
ZD921
093G 39S 40
RLZ 13B LLDS
ZD905
093G 39S 44
RLZ18B LLDS
CN901
006G
31500
EYELET
T901
006G
31502
1.5MM RIVET
IC904
056G 158 10
C938
065G
1K152 1T
C906
065G
2K152 1T
C108
067G215Y1097NT
EC 1.0UF 50V KY50VB1M-TP5
C908
067G215Y2207KT
CAP 105
FB102
071G
55
FERRITE BEAD
FB801
071G
55
FERRITE BEAD
FB901
071G
55 29
FERRITE BEAD
F901
084G
55 7W
FUSE 3.15A 250V WICKMANN
F903
084G
56 4W
FUSE 4.0A 250V
D900
093G
6026T52T
RECTIFIER DIODE FR107
D901
093G
6038T52T
FR103
L901
IC AZ431AZ-AE1 TO-92 BY AAC

1.5NF/1KV Z5F+-10%
GP
CERAMIC CAP
22UF M 50V KINGNICHI
715G2545
POWER BOARD PCB
Q90G6093
HEAT
S73G17476V
Q07G
5*11MM
SINK
FILTER
2
COMPOUND PALLET
Q40G 17N61572A
RATING LABEL
Q40G0002615A10
POP LABEL
Q40G0002786 4A
VISTA LABEL
Q41G7800615A55
SA SERVICE CENTER FOR 712SA
Q41G780A61513B
716VWY QSG
Q44G
10
BIG CARTON FOR IC
Q44G
10
CORNER PAPER FOR CKD
Q45G
76 28CK2
PE BAG
Q45G
88606 16
PE BAG FOR CLAMP
Q45G
88606CK2
Q45G
88609122
PE BAG FOR BASE

EPE BAG FOR MONITOR
Q52G6020 44
PROTECT FILM
Q70G700761519A
716VWY CD
040G 581 26646
EANCODE LABEL
044G600092A
CARTON
48

Aoc 716vwy+service+manual

Uploaded by

Copyright:

Available Formats

Aoc 716vwy+service+manual

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aoc 716vwy+service+manual

Uploaded by

Copyright:

Available Formats

17 LCD Color Monitor

5.1.Software Flow Chart................13

5.2.Electrical Block Diagram..............16

Important Safety Notice................................3

2.LCD Monitor Description.......5

6.2. Power Board..............................................22

3.3.Adjusting the Picture.......................................7

4.1.Input Signal Connector.............................9

8.1.Equipments and Tools Requirement...............29

4.2 Power Supply Requirement10

4.3.Factory Preset Display Modes.........................10

9.White-Balance Luminance adjustment......36

10.Monitor Exploded View..........38

17 LCD Color Monitor

First Version Release

17 LCD Color Monitor

17 LCD Color Monitor

TFT Color LCD

160 (H) 160 (V) (TYPE)

Response time (type)

R,G,B Analog Interface

55.5 kHz - 70.6 kHz

1440 x 900 (60 Hz)

Plug & Play

Weight (monitor only) 3.1 kg

Operating Temp: 5C to 35C

17 LCD Color Monitor

Monitor Block Diagram

Flat Panel and

For white balance

(Include: adapter, inverter)

Video signal, DDC

17 LCD Color Monitor

3.1 General Instructions

The power cord should be connected.

3.2 Control Buttons

17 LCD Color Monitor

3.3 Adjusting the Picture

Press the MENU-button to activate the OSD window.

17 LCD Color Monitor

17 LCD Color Monitor

4.1 Input Signal Connector

17 LCD Color Monitor

4.2 Power Supply Requirement

A/C Line frequency range

Peak surge current

: < 55A peak at 240 VAC and cold starting

Power line surge

: No advance effects (no loss of information or defect) with a

: 3.5 Amp (12V)

4.3. Factory Preset Display Modes

17 LCD Color Monitor

4.4. Panel Specification

4.4.2 Display Characteristics

4.4.3 Electrical Characteristics

17 LCD Color Monitor

4.4.4 Optical Characteristics

17 LCD Color Monitor