COMPABLOC Compact Heat Exchanger Range

COMPABLOC compact heat exchanger range
High-performance fully welded heat exchanger for process industries

Application
The Alfa Laval Compabloc is a fully welded compact heat
exchanger designed for the complete range of process and
utility duties. The Compabloc range provides the most
efficient, cost-effective, compact and cleanable heat exchanger
solution available today. After 20 years on the market, the
Compabloc has shown itself to be the market leader in terms
of life-cycle costs and energy savings.
Design
Alfa Laval designed the Compabloc range of welded heat
exchangers with a focus on performance, compactness, and
serviceability.
The heart of the Compabloc is a stack of corrugated heat
transfer plates in 316L stainless steel, or other high-grade
material. The plates are laser welded (models CP30 and
above) and form a compact core. This core is then enclosed
and supported by four corner girders, top and bottom heads
and four side panels (see Sectional view of Compabloc).
These components are bolted together and can be quickly
taken apart for inspection, service and cleaning.
The design can be configured in single or multi-pass arrangements in either co-current or counter-current operation, for
liquid-to-liquid or two-phase duties.
Operating Principles
The two media in the Compabloc heat exchanger flow in
alternately welded channels between the corrugated plates.
These corrugated plates promote high turbulence which provides high heat transfer efficiency and help minimize fouling.
The media flows in a cross-flow arrangement within each
pass (see figure below) while the overall flow arrangement is
counter-current for a multi-pass unit (if required the unit can
also be designed with overall co-current operation). Each
pass is separated from the adjacent passes by a pressed
baffle which forces the fluid to turn between the plate pack
and the panel.
Compablocs flexible pass arrangements make it suitable for
liquid-to-liquid duties with dissimilar flow rates, or two phase
condensation or reboiler applications.
Options
The Compabloc is available in virtually any material that can
be pressed and welded, including:
316L SST
254 SMO
Titanium
Alloy C-276
904L SST (UB6)
Alloy B-2
Alloy C-22
Incoloy 825
Inconel 600
Tantalum
The panels and nozzles can be un-lined or lined using the
same materials as the plate pack. The nozzle size is variable
and can be selected independently for each side.
Panel
Heat transfer
plate pack
Upper
head
Baffle
Girder
Gasket
Lower
head
Support
Sectional view of Compabloc
Process Optimization
Because of the Compablocs unique design concept the
possibilities for process optimization and flexibility are limitless.
The Compabloc can be designed with both single-pass or
multi-pass configurations. For condensation, reboiling and
liquid-to-liquid duties without temperature cross, the singlepass configuration is suitable with its total cross-flow. The
large cross flow area and short flow path fit low-pressure
conden-sing duties and allow very low pressure drops. A
multi-pass configuration is suitable for duties with temperature
cross and close temperature approaches.
There are currently seven plate family models with heat transfer areas ranging from 0.7 to 840 m2 per unit and each model
is modularized with different numbers of plates to allow the
best fits for any duty.
Special applications
Compabloc two cooling media
The two media flow in cross-flow in alternately welded channels.
The design concept allows a different number of passes on

the two circuits thereby enabling large differences in flow
rates between the hot side and the cold side. The baffling can
easily be re-arranged to suit a new duty should the flow rates
or temperatures change. Close temperature approaches
down to 3C (5.4F) can be achieved.
The Compabloc can be mounted vertically, for normal liquidto-liquid duties, condensation with sub-cooling and gas
cooling duties, or horizontally, for most condensation duties,
reboiling or liquid-to-liquid duties where height is restricted.
For special applications, the Compabloc 2 cooling medium

range is available which offers a two-section condenser with
two different cooling medias.
Pressure vessel codes

The Compabloc is available as standard in accordance with
international pressure vessel codes such as ASME (with or
without U stamp) or ADM (code for PED and CE marking).
Dimensions
Technical Data

Standard Press.
Standard
Max. Dimensions (mm) ***
Model
Range (bar) *
Temp. Range (C)
A x A x B
*Code
Max. Weight

(kg) ****
CP 15
FV - 32
-40 - 300
PED
280 x 280 x 540
250
CP 20
FV - 32
-40 - 300
PED
430 x 430 x 730
550
CP 30
FV - 32
-40 - 300
PED
500 x 500 x 1070
1160
CP 40
FV - 32
-40 - 300
PED
600 x 600 x 1400
2330
CP 50
FV - 32
-40 - 300
PED
840 x 840 x 2050
5940
CP 75
FV - 32
-40 - 300
PED
1240 x 1240 x 3600
17780
CP 120
FV - 42
-50 - 400
PED
2190 x 2190 x 3500
50000
* other pressures and temperatures may be available on request.

** ASME is also available
*** does not include nozzle length.
**** weight is determined by maximum number of plates and highest pressure rating.
Note: both vertical and horizontal configurations are available..
PCT00096EN 0903
How to contact Alfa Laval

Up-to-date Alfa Laval contact details for
all countries are always available on our
website at www.alfalaval.com
All rights reserved for changes in specifications without prior notification

COMPABLOC Compact Heat Exchanger Range

Uploaded by

Copyright:

Available Formats

COMPABLOC Compact Heat Exchanger Range

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

COMPABLOC Compact Heat Exchanger Range

Uploaded by

Copyright:

Available Formats

COMPABLOC compact heat exchanger range

High-performance fully welded heat exchanger for process industries

Compabloc two cooling media

The two media flow in cross-flow in alternately welded channels.

The design concept allows a different number of passes on

For special applications, the Compabloc 2 cooling medium

Pressure vessel codes

Max. Dimensions (mm) ***

Temp. Range (C)

280 x 280 x 540

430 x 430 x 730

500 x 500 x 1070

600 x 600 x 1400

840 x 840 x 2050

1240 x 1240 x 3600

2190 x 2190 x 3500

* other pressures and temperatures may be available on request.

How to contact Alfa Laval

All rights reserved for changes in specifications without prior notification

You might also like