Question 10: Differential Equations

Please remember to photocopy 4 pages onto one sheet by going A3A4 and using back to back on the photocopier

Pag
e
Introduction

Revision of Logs

Common integration questions which involve logs

Exam questions: part as

Exam questions: part bs

Motion expressed in terms of acceleration

Motion expressed in terms of forces

12

Power

15

Guide to answering exam questions: 2010 - 1996

16

*********** Marking Schemes / Solutions to be provided separately *************

http://xkcd.com/1201/Introduction
Up until now anytime we needed to connect v, u, a, s or t, we simply used our equations of motion.
These equations only work however if the acceleration is constant.
In this chapter we will see that the acceleration is not constant and therefore we need to resort to integration
to help us.
Be comfortable using logs and integration (particularly integration by substitution) see any textbook.

Should I use constants of integration or limits?

Its (slightly) interesting that the marking schemes usually use constants of integration for part (a) but tend to
use limits of integration for part (b).
You can use either. Some students have a preference for one over the other.

Revision of Logs
Write in any unfamiliar relationships involving logs
Remember
ex and ln(x) are inverse functions
eln (x) = x and ln (ex) = x

Common integration questions which involve logs

Write in any unfamiliar integrations

a=
a=

dv
dt

if linking speed and time

v dv
ds

if linking speed and distance

.
When integrating there are four options
1. Common expressions which you become familiar with.
e.g.
1/x = ln x
1/(x+1) = ln (x+1)
1/(x-1) = - ln (x-1)
2. Expressions found in the log-tables

3. Integration by substitution
When will I need to use this?
When the term below the line is one order higher than the term above the line.
This is no longer on the syllabus and as such cant get asked, but because so many questions from the past
papers use it, it is a useful exercise to learn the procedure (its quite short) and include these questions for
practice.
4. Long division
When will I need this?
If the term above the line is of the same order as the term below the line.

Exam questions: part as

The maths part
Generally when the question says solve, the convention seems to be solve for the variable on top
(usually y).

Begin by taking out common factors.

Bring terms involving x to one side and terms involving y to the other.

Ensure that dy and dx are on top on both sides.

From 2012 onwards questions which require Integration by Substitution will no longer be asked (its no
longer on the Higher Maths course).

Average speed =

Total distance
Total time

2013 (a)
2 dy
7=0
If x
dx
2011 (a)
2 dy
If x
dx

and y = 1 when x = 7, find the value of y when x =14.

- xy = 7y and y = 1 when x = 1, find the value of y when x = 2.

2010 (a)
Solve the differential equation

given that y = 0 when x = 0

2009 (a)
Solve the differential equation

given that y = 3 when x =1.

2008 (a)
If

x2 y

dy
dy
y
1
dx
dx

and y = 0 when x = 0, find the value of x when

2007 (a)
dy
y 2 sin x
dx

given that y = 1 when x = /2

Solve the differential equation

2006 (a)
Solve the differential equation
2005 (a)
Solve the differential equation

dy
xy

dx 1 x
dy
x
dx

xy y = 0

given that y = e when x = 0.

given that y = 1 when x = 1.

2004 (a)
6

Solve the differential equation

2003 (a)
Solve the differential equation
2002 (a)
Solve the differential equation

given that y = 5 when x = 1.

dy
x2
y40
dx

dy
xy
2
dx 2 x 3

dy
e x y
dx

given that y = 1 when x = 2.

given that y = ln 4 when x = 0.

2001 (a) this question shouldnt have been asked it required knowledge of a concept in maths that is
not and was not on the leaving cert maths syllabus. Im only including it here so that you dont think Ive
forgotten about it.
Find
.
d y

dx x
Hence, or otherwise, solve the differential equation
given that y = 1 when x = 1.
1 dy y 1

x dx x 2 x
2000 (a)
If
dy
dy
x
xy
1 0
dx
dx

and y = 2 when x = e, find, correct to two places of decimals, the positive

value of y when x = e2.

1999 (a)
Solve the differential equation

given that v = 0 when x = 1.

1998 (a)
dv
If t dt = v vt and v = 3 when t = 5, find the value of v when t = 6.
1997 (a)
dy
x xy 0
If dx

and y = 2 when x = 0, find, correct to two places of decimals, the value of y

when x = 1.

1996 (a)
dy
4 yCosx
Solve the differential equation dx

1995 (a)

4
1 x dy

dx y

if y = e2 when

Solve the differential equation

if x = 0 when y = 1.
7

1994 (a)

dy y xy

1 x if y = 1 when x = 0.
Solve the differential equation dx
1993 (a)
x 2 2 dy
x ( y 1)
dx
If
and y = 2 when x = 1, find the value of y when x = 2.

1992 (a)
dy

2 Sin 2 x Cos 4 x
If dx
and if y = 1 when x = 4 ,

find the value of y when x = 2 .

1991 (a)
x
Solve the differential equation

dy 1
y
dx y

if y = 1 when x = 1.

1990 (a)
Solve the differential equation

dy
y 1 y
dx
if x = 1 when y = 1.

1989 (a)
Find the solution of the differential equation

dy
y xy
dx
if y = 1 when x = 1.

1988 (a)
dx
100 4 x 2
Solve the differential equation dt
if x = 5 when t = 0.

1987 (a)
Solve the differential equation

2 x(1 y )

dx
8 x2
dy

if x = 2 when y = 3

1986 (a)
Solve the differential equation

dy
y (1 x )
dx
if

1985 (a)
Find the solution of the differential equation

y = 3 when x = 1.

3 y 2 ( x 1)

dy
1 y3
dx

if y = 0

when x = 2.

1984 (a)
dv
g

dt
t

k
Find the general solution to
= g kv where g and k are constants. Show that Lim v

1983 (a)
Find the solution of the differential equation sinx

1982 (a)

dy
dt

= ycosx

when y = 2 at x =

1 x dy
x
dx
3

(i) Find the solution of the differential equation

when y = 2 at x = 1.

d s
ds
ds

2
dt when dt = 1 at t = 0 and s = 0 at t = 0.
(ii) Find the solution of the differential equation dt

1981 (a)
dy
y 2 cos 3 x 0
Solve the differential equation dx
given that y = 2 when x = /6

1980 (a)
d2y 2
dy
3 0

2
y
Solve the differential equation dx
given that dx

and x =

2 when y = 1.

1979 (a)
d2y
dy
dy
y
x 2
dx
Solve the differential equation dx
hence or otherwise solve dx
where y = 0 when x = 1 and y = 3 when x = e
x

1978 (a)
Solve the following differential equations:
dy
1 y2
(i) dx
if y = 0 when x = 1
d2y
1
dy
3
2
y if dx = 1 and x = when y = 1
(ii) dx

1977
dy
y sin x
(i) Solve the differential equation dx
if y =

(ii) Solve the equation

d2y
dy
3 2y 0
2
dx
dx

e when x = 3

if y = 2

and

dy
0
dx

when x = 0.

1982 (b) (i)

2

d 2s
ds
ds

2
dt
dt

when dt = 1 at t = 0 and s = 0 at t = 0.
Find the solution of the differential equation

1981 (b) (i)

d2y
dy
K
2
dx where K is a constant.
Find the general solution to dx
So you know that the rate of change of displacement with respect to time is called velocity, and the rate
of change of velocity with respect to time is called acceleration.

10

What about the rate of change of acceleration with respect to time?Part bs

Motion expressed in terms of acceleration
**************************************************************
For many questions we will use a= dv/dt {links velocity and time}
But we may also need to link velocity and distance. To get an expression for this we do the following:
a = (dv/dt)
a = (dv/dt) (ds/ds) {multiply above and below by ds}
a = (ds/dt) (dv/ds) {rearrange the terms above and below the line}
a = v.dv/ds {because ds/dt = v}
So we have two expressions for a:
a= dv/dt {linking velocity and time}
or a = v.dv/ds {linking velocity and distance (strictly speaking displacement}
Occasionally you will need to link s and t directly so you must first use either a = v.dv/ds (to get an
expression for v in terms of s) or a = dv/dt (to get an expression for v in terms of t) and then substitute ds/dt
for v and continue.
***************************************************************
2014 (a) {this would normally appear on the (b) section of the question}
A particle moving in a straight line experiences a retardation of 0.7v3 m s2, where v m s1 is its speed.
It takes 0.04 seconds to reduce its speed from an initial value of 200 m s1 to v1 m s1.
Find
(i) the value of v1
(ii) the distance travelled during this 0.04 seconds.
2013 (b)
A particle starts from rest at O at time t = 0. It travels along a straight line with acceleration (24t 16) m s2,
where t is the time measured from the instant when the particle is at O.
Find
(i) its velocity and its distance from O at time t = 3
(ii) the value of t when the speed of the particle is 80 m s1.
2010 (b)
The acceleration of a cyclist freewheeling down a slight hill is 0.12 0.0006v2 m s-2 where the velocity v is
in metres per second.
The cyclist starts from rest at the top of the hill.
Find
i the speed of the cyclist after travelling 120 m down the hill
ii the time taken by the cyclist to travel the 120 m if his average speed is 2.65 m s-1.

11

2007 (b)

v2

3200

The acceleration of a racing car at a speed of v m/s is

The car starts from rest.
Calculate correct to two decimal places
(i) the speed of the car when it has travelled 1500 m from rest
(ii) the maximum speed of the car.

m/s2.

2006 (b)
The acceleration of a particle moving horizontally in a straight line is 1/x3 away from a fixed point o, where
x is its distance from o. The particle starts from rest at x = 1.
(i) Calculate the velocity of the particle when x = 4/3
(ii) Calculate the time that it takes the particle to reach a point 2 metres from o.
2002 (b)
A particle starts from rest and moves in a horizontal line.
Its speed v at time t is given by the equation
.
dv
100 v
dt
(i) Find the time taken for the speed of the particle to increase from 25 m/s to 75 m/s.
(ii) How far does the particle travel in going from rest to a speed of 75 m/s?
(iii)
Determine the limiting speed, v1 of the particle ( that is v v1 as t ).
1992 (b)
A particle experiences a retardation of kv m/s2 when its velocity is v m/s. Its velocity is reduced from its
initial value of 210 m/s to 70 m/s in 0.5 s and it travels a distance x m in this time.
(i) Find the value of k and deduce an expression for the velocity at any time t.
(ii) Calculate the value of x.
2000 (b)
The deceleration of a particle moving in a straight line with speed v m/s has magnitude
4e

v
6

m/s2.

The particle has an initial speed of 6 m/s.

(i) Find the time t1 for the speed to decrease to 3 m/s.
(ii) Find the time t2 for the particle to come to rest.
(iii)
Deduce that
.
t2 t1
e
t1
1998 (b)
A particle moves in a straight line. The initial speed is u and the retardation is kv3, where v is the speed at the
time t. If s is the distance travelled in time t, prove
u
v
1 ksu
(i)

(ii)

ks 2 s

2
u
12

1997 (b)
A particle moves in a straight line and undergoes a retardation of 0.04v3 m/s2, where v is its speed.
(i) If the initial speed of the particle is 25m/s, find its speed when it has travelled a distance of 49 m.
(ii) Find the time for the speed to reduce from 25m/s to 15m/s.
1982 (b)
A particle moves in a straight line with acceleration equal to minus the square of its velocity.
If its initial velocity is 1 m/s, calculate the distance travelled one second later.
1981 (b)
A particle moves in a straight line so that at any instant its acceleration is, in magnitude, half its velocity.
If its initial velocity is 3 m/s, find an expression for the distance it describes in the fifth second.
1980 (b)
A car starts from rest.
When it is at a distance s from its starting point, its speed is v and its acceleration is 5 v2.
Show that vdv = (5 v2) ds and find as accurately as the tables allow its speed when s = 1.5.
1979 (b)
v2
10 ,

A body is moving in a straight line subject to a deceleration which is equal to

where v is the velocity.
The initial velocity is 5 m/s.
In how many seconds will the velocity of the body be 2 m/s and how far will it travel in that time?
2014 (b)
{different more so than tricky. You must know the significance of the term changes direction. I wont spoil
the suspense}
A particle moves in a straight line with an acceleration of (2t 3) m s2 at time t seconds.
At time t = 0 the particle has velocity of 2 m s1 and displacement of 1 m relative to a fixed point O on the
line.
Find
(i) the times when the particle changes direction
(ii) an expression for the displacement of the particle from O at time t
(iii)
the total distance travelled in the first 2 seconds.

13

Acceleration is proportional to the speed

****************************************************************************
Acceleration is proportional to the square of the speed
a v2
a = k v2
Usually the question gives us enough information to find k
***************************************************************************
1984 (b)
A car, free-wheeling on a straight road, experiences a retardation which is proportional to the square of its
speed.
Its speed is reduced from 20 m/s to 10 m/s in a distance of 100 m.
Calculate the time taken to travel the 100 m.
1989 (b)
A cyclist, free-wheeling on a straight level road, experiences a retardation which is proportional to the
square of his speed.
His speed is reduced from 6 m/s to 3 m/s in a distance of 35 m.
Show that the average speed during this period is 6ln2.

14

Motion expressed in terms of forces

***********************************************************************************
Either all terms must represent an acceleration or a force, but you cannot mix them.
If the left hand side is expressed as a force (e.g. mdv/dt) then all terms on the right hand side must be
expressed as forces.
Similarly if the left hand side is given as an acceleration (e.g. dv/dt) then all terms on the right hand side
must be expressed as accelerations.
Sometimes its not obvious whether a term in the question is an acceleration or a force; look at the units to
help you.
If the resistance is expressed as kv2 N per unit mass then mathematically the resistive force = - mkv2 (it is a
force).
********************************************************************************
1986 (b)
A particle moves in a straight line in a medium whose resistance is proportional to the cube of its speed.
No other force acts on the body.
The speed falls from 15 m/s to 7.5 m/s in a time of t seconds.
Show that the distance travelled in this time is 10t m.
2004 (b)
A particle is projected vertically upwards with an initial speed of 2g m/s in a medium in which there is a
resistance kv2 N per unit mass where v is the speed of the particle and k is a constant, where k > 0.
1
ln 1 4kg
(i) Prove that the maximum height reached is 2k
(ii) If the speed of the particle is g m/s when it has reached half its maximum height, find the value of k.

2009 (b)
A particle of mass m is projected vertically upwards with speed u. The air resistance is kv2 per unit mass
when the speed is v.
The maximum height reached by the particle is ln 4/(2k).
(i) Find the value of u in terms of k.
(ii) Find the value of k if the time to reach the greatest height is /3 seconds.

1996 (b)
A particle of mass m is projected vertically upwards with a velocity v of
per unit mass. Prove
ln 3
(i) the greatest height reached by the particle is 2k

2g
k , the air resistance being kv2

2g

(ii) the velocity of the particle when passing through the point of projection on the way down is
15

3k

1995 (b)
A particle of mass m falls from rest against air resistance of mkv, where k is constant and v is the speed.
Prove that
g
ln 2
(i) the time taken to acquire a speed of 2k is k
g
(ii) the speed of the particle tends to a limit k
1988 (b)
A particle of mass m is projected vertically upwards with speed 120 m/s in a medium where there is a
resistance of 0.098v2 per unit mass of the particle when v is the speed.
Calculate the time taken to reach the highest point.
1978 (b)
A particle of mass m is acted on by a force 2m/x5 directed away from a fixed point O, where x is the distance
of the particle from O.
The particle starts from rest at a distance d from O.
1
2
Show that the velocity of the particle tends to a limit d .

2012 (b)
A particle of mass m is fired horizontally through a block of resistive gel.
The resistance to motion is mkv2 N when v m s1 is the speed.
The particle enters the gel at a speed of 1000 m s1 and
seconds later exits the gel at a speed of 10 m
s1.
(i) Show that k =
(ii) Use the fact that

to show that the length of the block of gel is

or otherwise
ln100 m.

2001 (b)
A car of mass m kg is travelling along a level road. The resistance to motion is mkv2 N, where v m/s is the
speed. When the car is travelling at 14 m/s, the engine cuts out.
Ten seconds after the engine cuts out, the speed of the car is 7 m/s.
(i) Show that k =
.
1
140
(ii) The car travels a distance of s metres in the first T seconds after the engine cuts out.
Show that
T

s 140 ln 1
10

1985 (b)
A particle of mass m moves in a straight line.
The only force acting on it being a resistance mkv2, where v is its speed and k is a constant.
It is initially projected from the point o with speed u.
16

When the particle reaches a point p on the line its speed is u/3.
(i) Show that the average speed between o and p is ulog3.
(ii) Find the speed of the particle when it is at the midpoint of [op].

17

2005 (b)
A mass of 9 kg is suspended at the lower end of a light vertical rope.
Initially the mass is at rest. The mass is pulled up vertically with an initial pull on the rope of 137.2 N.
The pull diminishes uniformly at the rate of 1 N for each metre through which the mass is raised.
(i) Show that the resultant upward force on the mass when it is x metres above its initial position is 49 x .
(ii) Find the speed of the mass when it has been raised 15 metres.
(iii)
Find the work done by the pull on the rope when the mass has been raised by 15 m.
1993 (b)
A particle starts with a speed of 20 m/s and moves in a straight line.
The particle is subjected to a resistance which produces a retardation which is initially 8 m/s2 and which
increases uniformly with the distance moved, having a value of 9 m/s2 when the particle has moved a
distance 5 m.
If v m/s is the speed of the particle when it has moved a distance x m
dv
x

v
8
5

(i) prove that, while the particle is in motion dx

(ii) calculate the distance moved by the particle in coming to rest.
1990 (b)
A particle of mass 8 kg starts from rest and is acted on by a force which increases uniformly in 10 s from
zero to 16 N.
t
(i) Prove that t seconds after the particle begins to move, its acceleration is 5 m/s2.
(ii) Prove that, when the particle has moved x m, its speed is v m/s, where 10v3 = 9x2.
1999 (b)
The rocket engine of a 12 tonne missile produces a thrust of 180.1 kN.
The missile is launched in a vertical direction. The air resistance is v2 N where v is the speed of the missile.
(i) Find the speed of the missile after 30 seconds.
(ii) Find the percentage error in this speed if air resistance is ignored.
1991 (b)
A particle is projected in a straight line from a fixed point with velocity u at time t = 0. It is opposed by a
u 2n
s
2 n k when v = 0 is n < 1.
resistance kvn per unit mass. If s is the displacement at time t prove that
1987 (b)
The resistance to motion of a train of mass m is constant and equal to 60 N per tonne.
When moving with constant speed 16 m/s on a level line the train begins to ascend an incline of 1 in 98, i.e.
sin-1(1/98).
(i) Assuming that the engine continues to work at the same rate (ie power is constant) and that v m/s is the
speed of the train up the incline t seconds after the train has begun to climb, show the equation of motion
v dv 4

6
dt
25

is
(ii) Calculate the time which elapses before the velocity falls to 12 m/s.

18

1983 (b)
A particle of mass 8 kg moves along a line (the x-axis) on a smooth horizontal plane under the action of a

force in newtons of (40 3 x ) i where i is the unit vector along the axis and x is the displacement of the
particle from a fixed point o of the axis.
If the particle starts from rest at o, find its speed when x = 100 and calculate when it next comes to
instantaneous rest.
1976
An atomic nucleus of mass M is repelled from a fixed point o by a force M k2x-5, where x is the distance of
the nucleus from o and k is a constant.
2k 3
2
It is projected directly towards o with speed d
from a point a where |oa| = d.
Find the speed of the nucleus when if reaches the midpoint of oa and find how near it gets to o.
1975
The force of attraction of the earth on a particle of mass M distance x from the centre of the earth is
where a is the radius of the earth x a .

Mga 2
x2

Write down the equation of motion for a particle moving under this force alone and calculate the speed of
1
2

the particle at distance x if it was projected vertically upwards from the earths surface with speed 2ga .
1

7

Prove that the time taken to reach a height 3a above the earths surface is 3

2a 3

g .

1974
A particle of mass 01 kg falls vertically from rest under gravity in a medium which exerts a resisting force
of magnitude 002v newtons when the speed of the particle is v m/s.
1

1 e 5
lim

t
and find
Show that v = 49
v.
Find an expression for the distance travelled in time t seconds.
1973
An engine pulls a train along a level track against a resistance which at any time is K times the momentum.
The engine works at constant power 25KMUo2, where M is the total mass of the train and engine and K, Uo
are constants.
dv
Show that the equation of motion of the train is v dt = K(25Uo2 v2), and find the time taken to increase
speed from Uo to 4Uo.
1972
A particle of mass M kg is projected vertically upwards from ground level with a speed of 70 m/s.
In addition to the weight of the particle, there is the resistance force of the air of magnitude 1/20Mv2 newtons
when the speed is v metres per second.
dv v 2 196

v
Show that the equation of motion during the upward journey is 20 dx

Prove that the maximum height reached is (10 ln 26)m, and that the time taken to reach it is approximately
1.95s. (Note: ln26 = loge 26)
19

1971
A particle of mass M is projected with speed u along a smooth horizontal table.
The air resistance to motion when the speed of the particle is v, is Mkv where k is a constant.
By solving the equation of motion for the particle, show that v = ue-kt and prove that as time increases
indefinitely, the distance travelled ultimately approaches u/k.
Find the time taken for the particle to travel half this distance.

20

Power
Work = Force displacement
W = F.s
P = F.v (divide both sides by time)
Force=

Power
velocity

2008 (b)
A train of mass 200 tonnes moves along a straight level track against a resistance of 400v2, where v m/s is
the speed of the train.
The engine exerts a constant power of P kW.
8000 v 3
The acceleration of the train is 500v .
(i) Find the value of P.
(ii) The train travels a distance 69.07 m while its speed increases from 10 m/s to v1 m/s. Find the value of v1.

2003 (b)
A car of mass 490 kg moves along a straight level horizontal road against a resistance of 70v N, where v m/s
is the speed of the car. The engine exerts a constant power of 63 kW.
(i) Show that the equation of motion is
.
dv 900 v 2
7
dt
v
(ii) Calculate, correct to two decimal places, the time it takes the car to increase its speed from 10 m/s to 20
m/s.
1994 (b)
A car of mass 1000 kg moves with velocity v m/s along a horizontal road against a constant resistance of
1500 N.
The engine is working at a constant rate of 75 kW.
150 3v
2v
(i) Show that the acceleration of the car is
m/s2.
(ii) Calculate, correct to two decimal places, the time taken by the car to increase its speed from 0 m/s to 25
m/s.

21

Questions with a twist popular in recent years

2013 (c)
Water flows from a tank at a rate proportional to the volume of water remaining in the tank.
The tank is initially full and after one hour it is half full.
After how many more minutes will it be one-fifth full?
2012 (a)
Newtons law of cooling states that the rate of cooling of a body is proportional to the difference between
the temperature of a body and the temperature of its surroundings.
If is the difference between the temperature of a body and the temperature of its surroundings then
d
=k
dt
A body cools from 80 C to 60 C in 10 minutes.
The temperature of the surroundings is maintained at 20 C.
Find
(i) the value of k
(ii) the temperature of the body after a further 15 minutes.

22

Guide to answering the exam questions

2011 (a)
(i) Straightforward once you figured out how to rearrange the terms to solve the integration.
Answer: distance = 44.63 m
(ii) Straightforward. Answer: average speed = 19.24 m s-1
2011 (b)
2010 (a)
Straightforward. Answer:
2010 (b)
(i) Straightforward to set up but the differentiation is difficult.
Answer: v = 5.18 m s-1
(ii) Straightforward. Answer: t = 45.3 s
2009 (a)
Straightforward. Answer: y = (4x2 1)
2009 (b)
(i) Care needs to be taken with the integration and algebra, but its nothing that hasnt been seen before and
is fairly straightforward. Answer: u = (3g/k)
(ii) This time you are given a time so you must go back to the start and use dv/dt. The integration this time is
particularly nasty. Solve to get k = 1/g.
2008 (a)
Easy peasy. Ans: x = 1.
2008 (b)
(i) You need to know that Force = Power/velocity.
Ans: P = 3200 Watts
(ii) Straightforward.
Ans: v = 15 m s-1.
2007 (a)
Easy peasy. Ans: y = 1/(1+ Cos x)
2007 (b)
(i) Need to use integration by substitution.
Ans: v = 44.12 m/s
(ii) Easy peasy if you remember that at maximum speed the acceleration will be zero, so use this.
Ans: v = 56.57 m/s.
2006 (a)
Need to use long division.
Ans: y = ex-ln(1+x)+1
2006 (b)
(i) Easy peasy. Ans: v = 0.66 m/s.
(ii) There is no expression that links time and distance so we need to first get an expression that links
velocity and distance (which we already have from part (i)), from that we get v = ((x2 1)/x2). Now
substitute dx/dt for v and finish.
Ans: t = 1.73 seconds.
2005 (a)
23

Easy peasy. Ans: y = ex + ln x -1

2005 (b)
(i) Easy if youve come across it before, not so easy if you havent. For every metre that the mass is raised
the force will decrease by 1 Newton, so after x metres it will have decreased by x Newtons. So begin
with Force = 137.2 x 9g and simplify to get the desired answer.
(ii) Straightforward. v = 11.76 m/s.
(iii)
Its not a concept we come across regularly (but we should it also came up under Rigid Body
Motion 2002 (b)); the energy something has is equivalent to the work done on it. So in this case to
calculate the work done we need to calculate the energy which the mass has. The marking scheme uses
the Kinetic Energy gained, but I dont understand why you dont also add the Potential Energy gained.
On the likelihood that I am missing something we will go with their answer. If you can explain it please
get back to me.
Ans: Work done = 622.5 J
2004 (a)
Straightforward. Ans: y = e-(1/x)+1
2004 (b)
(i) Straightforward, but involves quite a bit of algebra to get the desired expression.
(ii) Start off the same as for the previous part, but the limits for x are now h/2 and h, and the limits for v are
2g and g. Even more algebra this time.
Ans: k = 2/g.
2003 (a)
Straightforward. Ans: y = (2x2 3)1/4
2003 (b)
(i) Remember that Force = Power/velocity and the rest should follow.
(ii) Straight-forward. Ans: t = 1.65 seconds.
2002 (a)
Straight-forward. Ans: y = ln(ex + 3)
2002 (b)
(i) Straight-forward. Ans: t = 1.1 seconds.
(ii) Straight-forward. Ans: x = 63.63 m.
(iii)
Acceleration = 0, so v = 100 m.
2001 (a)
Apparently this question shouldnt have got asked because the maths is not on the leaving cert honours
syllabus.
2001 (b)
(i) Straightforward.
(ii) You cant link s and t directly, so you must first use v dv/ds as before to get v = 14 e-ks and then substitute
ds/dt for v and continue.
Ans: s = 140 ln(1+T/10)
2000 (a)
Straightforward. y = 2.32
2000 (b)
(i) Straightforward. Answer: t1 = 1.5(1/e 1/e)
24

(ii) Straightforward. Answer: t2 = 1.5(1 1/e)

(iii)
Straightforward, albeit with some tricky algebra.
1999 (a)
(i) Straightforward once you can deal with the integration; 1/(v2 + 1) becomes tan-1 v.
(ii) Answer: v = tan(ln x/7)
1999 (b)
Some quite tricky parts here.
(i) Set it up as normal (draw a diagram to help you identify all forces) then use F(net) = ma.
Note that 180.1 kN = 180100 Newtons and 12 tonne = 12000 g, so you get 180100 12000 g v2 =
12000 dv/dt
Now use the fact that (180100 12000 g) = 62500 which in turn (and heres the tricky bit) = 2502.
Next use log tables to help you integrate, but if youve got this far you should be well able to bring it on
home.
Answer: v = 138.64 m/s.
(ii) If air resistance is omitted then you can simply use equations of motion rather than differential equations
(after all, air resistance is the only reason that we need this chapter in the first place). This gives a new
value for v of 156.26 m/s.
Now you must also know that the formula for percentage error is error/correct value, all multiplied by
100.
Answer: percentage error = 12.7 %
1998 (a)
Straightforward
1998 (b)
(i) Straightforward nice question actually
(ii) Straightforward
1997 (a)
Straightforward
Answer: y = 0.82
1997 (b)
(i) Straightforward
Answer: v = 0.5 m/s
(ii) Straightforward
Answer: t = 0.035 seconds
1996 (a)
Straightforward
Answer: y = e4 sin x
1996 (b)
(i) Tricky integration to begin with, then tricky algebra with logs.
(ii) The question is basically asking you to find v when x = ln3/2k. Remember that for the equation at the
beginning mg will be positive while the air resistance will be negative.

25