Ingenious 69 Practice Labs: Routing Switching Tigers Forum

Routing
Switching
Tigers
Forum
Join
CCNP R&S
Renewed experience and content with
Ingenious
69 practice LABs
Daily Morning: 08:00am to 10:30am
Daily Evening: 05:00pm to 07:30pm
Sunday Only Afternoon: 02:30am to 6:30pm
Fast Track Daily Afternoon: 01:00pm to 05:30pm
fees refund if you are not an expert

Mentor: Vagish Dwivedi
Vinod: 9819059899, 9167224466, 9820611290.
www.rstforum.net
www.rstforum.net
RSTFORUM AT GLANCE FOR YOU

CONNECTING YOUR BUSINESS TO THE TECHNOLOGY SKILLS YOU NEED
Every year, RSTForum provides training to
thousands of students worldwide and imparts
the skills needed to build, design, and maintain,
networks and IT infrastructureimproving their
career prospects while filling the global demand
for networking professionals. With 5 academies
in India and operations being setup in Dubai and
Kenya Africa, RST Forum helps individuals
prepare for industry-recognized certifications

and IT and communication technology careers in
virtually every type of industry. Students
develop foundational skills in information &
communication technology while acquiring vital 21st-century career skills in problem solving, collaboration, and
critical thinking. RST Forum runs one of the worlds largest class room with about 250-300 students studying
professional courses together at a location. Candidates complete hands-on learning activities and simulations to
develop practical skills to fill a growing need for IT professionals globally
flexible solutions for

your training needs
GLOBAL CHALLENGE
The growth of networks and absorption of technology has
created a shortage of skilled people to build, design and
IT TRAINING SOLUTIONS
maintain the infrastructure needed to communicate and do
Cisco certifications
Microsoft certifications
Redhat Linux certifications
HP Unix & Networking
Datacenter & Storage
Cloud & Virtual computing
3G / 4G / Telco solutions
Security & Ethical Hacking
Voice solutions
MPLS & SP solutions
Wireless & Microwave.
business. This shortage exists worldwide, particularly in

emerging countries where infrastructures are being built to
aid in economic development and growth. Likewise, people
need access to more and better job opportunities and
training that will prepare them for the global, technologydriven economy. RST Forum helps meet the growing global
demand for Infrastructure and communications technology
professionals and improves career prospects for IT&C
professionals.
www.rstforum.net
SUCCESSFUL CAREER
RSTForum has trained more than
60000 students to date. Many
students have gone on to successful
careers in a variety of industries,
while others have harnessed the
entrepreneurial spirit and knowledge
they acquired in RST Forum to start
their own businesses and create new
jobs.
GLOBAL PARTNERSHIP
RSTForum with its deep rooted industry connection has
helped students in placements. RSTForum collaborates with
companies to understand their staffing requirements and
works with potential candidates to enhance their skills and

make them ready for companies requirement. authorized
training partners of Cisco, Microsoft, Redhat and many
educational institutions, non profits organizations. RST Forum
also provides online curricula, teacher training, and
professional development for instructors. RST Forum helps
students prepare to assume information & communication
technology jobs, pursue additional training or education, and
learn globally recognized certification so they can maintain IT
Infrastructure and networks that form the core of today's -and tomorrow's global economy. Courses are offered in
multiple languages through a blended learning model that
combines classroom instruction with online curricula
blended learning model that combines classroom instruction
with online curricula, interactive tools and hands-on activities
IT STAFFING SOLUTIONS
RSTForum with its deep rooted industry connection has
helped students in placements. RSTForum collaborates
with companies to understand their staffing requirements
and works with potential candidates to enhance their skills
and make them ready for companies requirement.
LABS ON CLOUD
RSTForum uses Cloud computing to
efficiently provide Platform As A
Service (PAAS) to its students
enabling them to quickly access
Technology Racks over the internet
and practice lab exercise from home
These Racks are populated
with latest equipment's required for
practical exercises'.
WEB FORUM
RST Forums web based forum allows
its users to ask, hundreds of
technical experts about their
technology and certification
problem. RST forum is a tight knit
community of working professionals
that provide timely help on
technical, certification and design
related queries.
www.rstforum.net
DURATION
9 10 WEEKS (SUNDAY ONLY)
MORNING 2:30 06:30 (4hrs.)
9 21 DAYS (MON- FRI)
MORNING 08:00AM (3hrs.)
EVENING 05:00PM (3hrs.)
CCNP R&S
For network engineers who need to increase their value to
employers and stay current with advances in networking
knowledge and skills, the cisco CCNP routing and switching
certification program provides the education and training
required for installing, monitoring, and troubleshooting

network infrastructure products designed by the industry
leader in IP networking.
9 CRASH COURSE AVAILABLE
PRACTICAL SESSION
9 HANDS-ON PRACTICALS ON
ROUTER AND SWITCHES
9 LABS ON CLOUD AVAILABLE FOR
PRACTICE FROM HOME
HIGHLIGHTS
9 INDUSTRY EXPERIENCED
CERTIFIED INSTRUCTORS
9 LIFE TIME CCNP RACK ACCESS FOR
EXTRA PRACTICAL SESSIONS
9 LIFETIME REPEATING OF
LECTURES ALLOWED INVESTMENT
PROTECTION FROM FUTURE
UPGRADES.
9 FEES REFUND IF YOU ARE NOT AN
EXPERT
The CCNP R&S certification validates the ability to install,

configure, operate, and troubleshoot medium-size routed
and switched networks. CCNP certified professionals have
the knowledge and skills to make connections to remote
sites via a WAN, and mitigate basic security threats.
Cisco CCNP Routing and Switching certification validates the
ability to plan, implement, verify, and troubleshoot local- and
wide-area enterprise networks. CCNP certified professionals
can also work collaboratively with specialists on advanced
security, voice, wireless, and video solutions
For network engineers who aspire to plan, implement, verify

and troubleshoot local and wide-area enterprise networks,
the Cisco CCNP Routing and Switching certification program
provides the education and training required to develop
hands-on skills and best-practices. This job-role-focused
program utilizes lab-based learning and allows you to
maximize your investment in your education and increase the
value of your enterprise network..
www.rstforum.net
DURATION
9 10 WEEKS (SUNDAY ONLY)
MORNING 2:30 06:30 (4hrs.)
9 21 DAYS (MON- FRI)
MORNING 08:00AM (3hrs.)
EVENING 05:00PM (3hrs.)
9 CRASH COURSE AVAILABLE
CCNP R&S training covers (but is not limited to) the use of
these topics:The Implementing Cisco IP Routing (ROUTE 300101) is a qualifying exam for the Cisco Certified Network
Professional CCNP, Cisco Certified Internetwork Professional
CCIP, and Cisco Certified Design Professional CCDP
certifications. The ROUTE 300-101 exam will certify that the
successful candidate has the knowledge and skills necessary
to use advanced IP addressing and routing in implementing
scalable and secure Cisco ISR routers connected to LANs and
WANs. The exam certifies the routing knowledge and skills

of successful candidates. They are certified in using
advanced IP addressing and routing in implementing scalable
and highly secure Cisco routers that are connected to LANs,
WANs, and IPv6. The exam also covers configuration of
secure routing solutions.
PRACTICAL SESSION
9 HANDS-ON PRACTICALS ON
ROUTER AND SWITCHES
9 LABS ON CLOUD AVAILABLE FOR
PRACTICE FROM HOME
HIGHLIGHTS
9 INDUSTRY EXPERIENCED
CERTIFIED INSTRUCTORS
9 LIFE TIME CCNP RACK ACCESS FOR
EXTRA PRACTICAL SESSIONS
9 LIFETIME REPEATING OF
LECTURES ALLOWED INVESTMENT
PROTECTION FROM FUTURE
UPGRADES.
9 FEES REFUND IF YOU ARE NOT AN
EXPERT
Implementing Cisco IP Switched Networks (SWITCH 642-813)

is a qualifying exam for the Cisco Certified Network
Professional
CCNP, and Cisco Certified Design Professional
.
CCDP certifications. The SWITCH 642-813 exam will certify
that the successful candidate has important knowledge and
skills necessary to plan, configure and verify the
implementation of complex enterprise switching solutions
using Ciscos Campus Enterprise Architecture. The SWITCH
exam also covers secure integration of VLANs, WLANs, voice
and video into campus networks.
Troubleshooting and Maintaining Cisco IP Switched Networks
(TSHOOT 642-832) is a qualifying exam for the Cisco Certified
Network Professional CCNP certification. The TSHOOT 642832 exam will certify that the successful candidate has
important knowledge and skills necessary to (1) plan and
perform regular maintenance on complex enterprise routed
and switched networks and (2) use technology-based
practices and a systematic ITIL-compliant approach to
perform network troubleshooting.
www.rstforum.net
COURSE HIGHLIGHTS
This 21 day per module (Weekdays 2.5hrs.) OR 10-week per module (Sunday/Saturday)
instructor led CCNP course is designed to provide professionals with extensive networking
knowledge to accomplish their day to day job and CCNP certifications. The key to a high success
rate is based on the programs objectives as follows:
Assigned project manager will manage this program. This person will drive the
program from its registration stage to monitoring and tracking of the candidates
performance.
Curriculum is based on course outlines defined by principle company
The Instructor-led certified courses is designed for the candidates with an aim to
build theoretical knowledge supplemented by ample hands-on lab exercises
10 week / module or 21 days / module, of intensive training + labs design.
Courseware includes course kits and other reference material to enable students to
prepare for certification exams
Optimal balance of theory classes and practical labs every week to ensure maximum
absorption of technology by participants
Customized tests at the end of course to be attempted by every participant
Stringent passing standards with progress report of each participant
Facility of Lab on cloud available.(based on booking)
Repeating of lectures allowed (based on seat availability)
Boot camp includes intensive CCNP-lab workshop to improve time-management &
troubleshooting skills
Regular evaluation.
LABs on cloud available for practice from home
Project manager will track Progress and performance of the candidates for CCIE Labs
www.rstforum.net
CCNP R&S COURSE TOPIC . .

Following Topics will be covered in CCNP 300-101 Course.
UNDERSTAND NETWORK TECHNOLOGIES AND CONNECTING REMOTE

LOCATIONS:
Connectivity Overview
Routing across MPLS VPN
Routing over a GRE Tunnel
Dynamic Multipoint Virtual Private Network
Multipoint GRE
NHRP
IPSEC
NETWORK FUNDAMENTALS:
Connectivity Overview
FIB
Asymmetric routing
Describe IP operations
ICMP Unreachable and Redirects
IPv4 and IPv6 fragmentation
TTL
Recognize proposed changes to the network
Changes to routing protocol parameters
Routing protocol migration
Explain Frame Relay
Operations
Point-to-point
Multipoint
CONFIGURE AND VERIFY BASIC ROUTING:
Configure and verify default routing

Evaluate routing protocol types
Distance vector
Link state
www.rstforum.net
Path vector
Describe administrative distance

Troubleshoot passive interfaces
Configure and verify filtering with any protocol
Configure and verify redistribution between any routing protocols or routing sources
Configure and verify manual and auto-summarization with any routing protocol
Configure and verify policy-based routing
Identify suboptimal routing
Explain ROUTE maps
CONFIGURE AND VERIFY LOOP PREVENTION MECHANISMS:

Route tagging and filtering
Split-horizon
Route poisoning
IMPLEMENTING RIPNG:
Configuring RIP
Verification and investigation of RIP Database
Summary
IMPLEMENT AN EIGRP BASED SOLUTION, GIVEN A NETWORK DESIGN AND REQUIREMENTS:
Determine network resources needed for implementing EIGRP in a network

Create an EIGRP implementation plan
Create an EIGRP verification plan
Configure EIGRP routing
Verify an EIGRP solution using show and debug commands
Document the verification results for an EIGRP implementation

IMPLEMENT AN EBGP BASED SOLUTION, GIVEN A NETWORK DESIGN AND REQUIREMENTS:
Determine network resources needed for implementing eBGP on a network
Create an eBGP implementation plan
Create an eBGP verification plan
Configure eBGP routing
Verify eBGP solution was implemented properly using show and debug commands
Document verification results for an eBGP implementation plan
www.rstforum.net
IMPLEMENT AN IPV6 BASED SOLUTION, GIVEN A NETWORK DESIGN AND REQUIREMENTS:

Determine network resources needed for implementing IPv6 on a network
Create an IPv6 implementation plan
Create an IPv6 verification plan

Configure IPv6 routing
Configure IPv6 interoperation with IPv4
Verify IPv6 solution was implemented properly using show and debug commands
Document verification results for an IPv6 implementation plan
IMPLEMENT AN IPV4 OR IPV6 BASED REDISTRIBUTION SOLUTION:

Create a redistribution implementation plan based upon the results from a redistribution
analysis
Create a redistribution verification plan
Configure a redistribution solution

Verify that a redistribution was implemented
Document results of a redistribution implementation and verification plan
Identify the differences between an IPv4 and IPv6 redistribution solution
IMPLEMENT A MULTI-AREA OSPF NETWORK, GIVEN A NETWORK DESIGN AND

REQUIREMENTS:
Determine network resources needed for implementing OSPF on a network

Create an OSPF implementation plan
Create an OSPF verification plan
Configure OSPF routing
Verify OSPF solution was implemented properly using show and debug commands
Document the verification results for an OSPF implementation plan
IMPLEMENT LAYER 3 PATH CONTROL SOLUTION:

Create a Layer 3 path control implementation plan based upon the results of the
redistribution analysis
Create a Layer 3 path control verification plan
Configure Layer 3 path control
Verify that a Layer 3 path control was implemented
Document results of a Layer 3 path control implementation and verification plan
Implement basic teleworker and branch services
Describe broadband technologies
www.rstforum.net
Configure basic broadband connections

IP SLA

IMPLEMENT VLAN BASED SOLUTION, GIVEN A NETWORK DESIGN AND A SET OF
REQUIREMENTS:
Determine resources needed for implementing a VLAN based solution on a network
Create a VLAN based implementation plan
Create a VLAN based verification plan
Configure switch-to-switch connectivity for the VLAN based solution
Configure loop prevention for the VLAN based solution
Configure Access Ports for the VLAN based solution
Verify the VLAN based solution using show and debug commands
Document the verification after implementing a VLAN solution
CONFIGURE SWITCH ADMINISTRATION :
Configure and verify switch administration
SDM templates
Managing MAC address table
Troubleshoot Err-disable recovery
Configure and verify Layer 2 protocols

CDP, LLDP
UDLD
Normal, extended VLAN, voice VLAN
CONFIGURE AND VERIFY TRUNKING:

VTPv1, VTPv2, VTPv3, VTP pruning
Dot1Q
Native VLAN
Manual pruning
CONFIGURE AND VERIFY ETHERCHANNELS:
LACP, PAgP, manual
Layer 2, Layer 3
Load balancing
EtherChannel misconfiguration guard
www.rstforum.net
CONFIGURE AND VERIFY SPANNING TREE:
PVST+, RPVST+, MST

Switch priority, port priority, path cost, STP timers
PortFast, BPDUguard, BPDUfilter
Loopguard and Rootguard
CONFIGURE AND VERIFY OTHER LAN SWITCHING TECHNOLOGIES:

SPAN, RSPAN
Describe chassis virtualization and aggregation technologies
Stackwise
INFRASTRUCTURE SECURITY:
Configure and verify switch security features
DHCP snooping
IP Source Guard
Dynamic ARP inspection
Port security
Private VLAN
Storm control
CONFIGURE AND VERIFY VLANS:
Access ports
VLAN database
DESCRIBE DEVICE SECURITY USING CISCO IOS AAA WITH TACACS+ AND RADIUS:
AAA with TACACS+ and RADIUS
Local privilege authorization fallback

IMPLEMENT A SECURITY EXTENSION OF A LAYER 2 SOLUTION, GIVEN A NETWORK DESIGN
AND A SET OF REQUIREMENTS:
Determine network resources needed for implementing a Security solution

Create a implementation plan for the Security solution
Create a verification plan for the Security solution
Configure port security features
Configure general switch security features
Configure private VLANs
www.rstforum.net
Configure VACL and PACL
Verify the Security based solution using show and debug commands
Document the verification results after implementing a Security solution
IMPLEMENT SWITCH BASED LAYER 3 SERVICES, GIVEN A NETWORK DESIGN AND A SET OF
REQUIREMENTS:
Determine network resources needed for implementing a Switch based L3 solution
Create an implementation plan for the Switch based Layer 3 solution
Create a verification plan for the Switch based Layer 3 solution
Configure routing interfaces

Configure Layer 3 Security
Verify the Switch based Layer 3 using show and debug commands
Document the verification results after implementing a Switch based Layer 3 solution
IMPLEMENT HIGH AVAILABILITY, GIVEN A NETWORK DESIGN AND A SET OF REQUIREMENTS:

Determine network resources needed for implementing High Availability on a network
Create a High Availability implementation plan
Create a High Availability verification plan
Implement first hop redundancy protocols

Implement switch supervisor redundancy
Verify High Availability solution using show and debug commands
Document results of High Availability implementation and verification
HIGH AVAILABILITY NETWORKS:

Configuring NTP
NTP Modes
Securing NTP
SNTP
IMPLEMENTING SNMPV3:
SNMP Overview
SNMP Configurations
SNMP Verification
IMPLEMENTING CISCO IOS IP SLA:
IPSLA Introduction
www.rstforum.net
IPSLA Configuration
IMPLEMENTING PORT MIRRORING AND MONITORING SUPPORT:
SPAN and RSPAN Introduction

Configuration and Verification of SPAN and RSPAN
VERIFYING SWITCH VIRTUALIZATION :
Introduction to Cisco StackWise Solution
Verify StackWise
Redundant Switch Supervisor
Supervisor Redundancy Modes
VSS
Verify VSS
FIRST HOP REDUNDANCY PROTOCOL IMPLEMENTATION :
Configuring L3 Redundancy with HSRP
FHRP
HSRP Load Sharing
HSRP Tracking
HSRP Authentication
VRRP
Configuring VRRP
Tracking VRRP
VRRP Interface Configuration
GLBP
Configuring GLBP
GLBP Load Balancing
HSRP GLBP for IPv6

MAINTAIN AND MONITOR NETWORK PERFORMANCE:
Develop a plan to monitor and manage a network
Perform network monitoring using IOS tools
Perform routine IOS device maintenance
Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer
www.rstforum.net
NETWORK PRINCIPLES:
Use Cisco IOS troubleshooting tools
Debug, conditional debug
Ping and trace route with extended options

Apply troubleshooting methodologies
Diagnose the root cause of networking issues (analyze symptoms, identify and describe root
cause)
Design and implement valid solutions
Verify and monitor resolution
LAYER 2 TECHNOLOGIES:
Troubleshoot switch administration
SDM templates
Managing MAC address table
Troubleshoot Err-disable recovery

Troubleshoot Layer 2 protocols
CDP, LLDP
UDLD
Troubleshoot VLANs
Access ports
VLAN database
Normal, extended VLAN, voice VLAN
Troubleshoot trunking
VTPv1, VTPv2, VTPv3, VTP pruning
dot1Q
Native VLAN
Manual pruning
Troubleshoot EtherChannels
LACP, PAgP, manual
Layer 2, Layer 3
Load balancing
therChannel misconfiguration guard
Troubleshoot spanning tree
PVST+, RPVST +, MST
Switch priority, port priority, path cost, STP timers
PortFast, BPDUguard, BPDUfilter
www.rstforum.net
Loopguard, Rootguard
Troubleshoot other LAN switching technologies
SPAN, RSPAN
Troubleshoot chassis virtualization and aggregation technologies

Stackwise
LAYER 3 TECHNOLOGIES:
Troubleshoot IPv4 addressing and subnetting
Address types (Unicast, broadcast, multicast, and VLSM)
ARP
DHCP relay and server
DHCP protocol operations
Troubleshoot IPv6 addressing and subnetting
Unicast
EUI-64
ND, RS/RA
Autoconfig (SLAAC)
DHCP relay and server
DHCP protocol operations
Troubleshoot static routing
Troubleshoot default routing

Troubleshoot administrative distance
Troubleshoot passive interfaces
Troubleshoot VRF lite
Troubleshoot filtering with any protocol
Troubleshoot between any routing protocols or routing sources
Troubleshoot manual and autosummarization with any routing protocol
Troubleshoot policy-based routing
Troubleshoot suboptimal routing
Troubleshoot loop prevention mechanisms
Route tagging, filtering
Split-horizon
Route poisoning
Troubleshoot RIPv2
Troubleshoot EIGRP neighbor relationship and authentication
Troubleshoot loop free path selection
www.rstforum.net
RD, FD, FC, successor, feasible successor

Troubleshoot EIGPR operations
Stuck in active
Troubleshoot EIGRP stubs

Troubleshoot EIGRP load balancing
Equal cost
Unequal cost
Troubleshoot EIGRP metrics
Troubleshoot EIGRP for IPv6
Troubleshoot OSPF neighbor relationship and authentication
Troubleshoot network types, area types, and router types
Point-to-point, multipoint, broadcast, nonbroadcast
LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
Internal router, backbone router, ABR, ASBR
Virtual link
Troubleshoot OSPF path preference
Troubleshoot OSPF operations
Troubleshoot OSPF for IPv6
Troubleshoot BGP peer relationships and authentication
Peer group
Active, passive
States and timers
Troubleshoot eBGP
eBGP
4-byte AS number
Private AS
VPN TECHNOLOGIES:
Troubleshoot GRE
Infrastructure Security
Troubleshoot IOS AAA using local database
Troubleshoot device access control
Lines (VTY, AUX, console)
Management plane protection

Password encryption
Troubleshoot router security features
www.rstforum.net
IPv4 access control lists (standard, extended, time-based)

IPv6 traffic filter
Unicast reverse path forwarding
INFRASTRUCTURE SERVICES:
Troubleshoot device management
Console and VTY
Telnet, HTTP, HTTPS, SSH, SCP
(T)FTP
Troubleshoot SNMP
v2
v3
Troubleshoot logging
Local logging, syslog, debugs, conditional debugs
Timestamps
Troubleshoot Network Time Protocol (NTP)

NTP master, client, version 3, version 4
NTP authentication
Troubleshoot IPv4 and IPv6 DHCP
DHCP client, IOS DHCP server, DHCP relay
DHCP options (describe)

Troubleshoot IPv4 Network Address Translation (NAT)
Static NAT, Dynamic NAT, PAT
Troubleshoot SLA architecture
Troubleshoot tracking objects
Tracking objects
Tracking different entities (for example, interfaces, IPSLA results)
TROUBLESHOOT MULTI-PROTOCOL SYSTEM NETWORKS:
Troubleshoot EIGRP
Troubleshoot OSPF
Troubleshoot eBGP
Troubleshoot routing redistribution solution
Troubleshoot a DHCP client and server solution

Troubleshoot NAT
Troubleshoot first hop redundancy protocols
www.rstforum.net
Troubleshoot IPv6 routing

Troubleshoot IPv6 and IPv4 interoperability
Troubleshoot switch-to-switch connectivity for the VLAN based solution
Troubleshoot loop prevention for the VLAN based solution

Troubleshoot Access Ports for the VLAN based solution
Troubleshoot private VLANS
Troubleshoot port security
Troubleshoot general switch security
Troubleshoot VACLs and PACLs
Troubleshoot switch virtual interfaces (SVIs)
Troubleshoot switch supervisor redundancy
Troubleshoot switch support of advanced services (i.e., Wireless, VOIP and Video)
Troubleshoot a VoIP support solution
Troubleshoot a video support solution
Troubleshoot Layer 3 Security
Troubleshoot issues related to ACLs used to secure access to Cisco routers
Troubleshoot configuration issues related to accessing the AAA server for authentication
purposes
Troubleshoot security issues related to IOS services (finger, NTP, HTTP, FTP, RCP)
www.rstforum.net
CCNP LAB TOPICS . . . . . . . . .

Following hands-on labs sessions will be provided to CCNP students.
RIPv2 & RIPng:

Lab 1. Configuring RIPv2 for IPv4
Task 1: Configure interface IP addresses
Task 2: Enable IPv4 routing
Task 3: Create RIPv2 process for IPv4
Task 4: Configure network command
Task 4: Verify IP protocols and its details
Task 5: Verify routing table and RIP route entries
Task 6: Analyze outputs of debug command
Lab 2. RIPv2 Passive-interface and neighbor
Task 1: Configure passive-interface command in RIP Process
Task 2: Verify protocols and its details
Task 3: Verify using debug command
Task 4: Configure neighbor command
Task 6: Verify routing table and RIP routes
Lab 3. RIPv2 Authentication
Task 1: Create key chain and assign key
Task 2: Select encryption mode
Task 3: Enable RIPv2 authentication
Task 4: Verification of authentication
Task 5: Analysis of debug IP RIP
Task 6: Verify routing table
Lab 4. RIPv2 Default Network
Task 1: Configure default route towards ISP
Task 2: Configure RIPv2
Task 3: Configure default information originate command
Task 4: Verify default route propagation
Task 5: Verify using ping
Lab 5. RIPv2 Summarization
Task 1: Configure block of 4 networks in sequence
Task 2: Verify routes on neighbor router routing table
www.rstforum.net
Task 3: Summarize RIP routes on outgoing interfaces

Task 4: Verify receipt of summary route in neighbors routing table
Lab 6. Configuring RIPng for IPv6
Task 1: Configure Interface IPv6 address
Task 3: Create RIPng Process for IPv6 and provide routing process name
Task 4: Enable RIPng on interfaces
Task 5: Verify IPv6 protocols and its details
Task 6: Verify IPv6 routing table and RIP route entries
Lab 7. IPv6 RIPng Passive-interface:
Task 1: Configure passive-interface command in RIPng Process

Task 5: Verify IPv6 routing table and RIP routes
Lab 8. IPv6 RIPng Authentication
Task 3: Enable RIPng authentication
Task 5: Analysis of debug command for IPv6
Task 6: Verify IPv6 routing table
Lab 9. IPv6 RIPng Default Network
Task 2: Configure RIPng
Task 5: Verify using IPv6 ping
Lab 10.IPv6 RIPng Summarization
Task 1: Configure IPv6 block of 4 networks in sequence
Task 2: Verify routes on neighbor router IPv6 routing table
Task 4: Verify receipt of summary route in neighbors IPv6 routing table
www.rstforum.net
EIGRP:
Lab 11.Configuring EIGRP for IPv4
Task 1: Configure IPv4 EIGRP process for Autonomous
Task 4: Verify EIGRP updates are sent on relevant interfaces
Task 5: Verify EIGRP neighborship
Task 6: Verify EIGRP topology table
Task 7: Verify routing table and EIGRP route entries

Lab 12. Configuring EIGRP for IPv4 using named configuration
Task 1: Configure IPv4 EIGRP process with a name
Task 2: Enable address-family IPv4 for your AS
Task 3: Enter topology base mode for manipulation set:
Task 6: Verify EIGRP updates are sent on relevant interfaces
Task 8: Verify EIGRP topology table
Task 9: Verify routing table and EIGRP route entries
Lab 13.EIGRP Passive-interface
Task 1: Configure IPv4 EIGRP Process
Task 2: Configure to send updates on all interfaces using network 0.0.0.0
command.
Task 3: Suppress EIGRP updates using passive-interface default command
Task 4: Un-suppress EIGRP updates using no passive-interface command
Task 6: Verify routing table and EIGRP routes
Lab 14.EIGRP Passive-interface using named configuration
Task 1: Configure IPv4 EIGRP Process with a name
Task 3: Configure to send updates on all interfaces using network 0.0.0.0
command.
Task 4: Enter address-family default interface configuration mode (af-interface
default)
Task 5: Suppress EIGRP updates using passive-interface command
Task 6: Exit address-family default interface configuration mode
www.rstforum.net
Task 7: Enter address-family interface serial 2/0 mode

Task 8: Un-suppress EIGRP updates using no passive-interface
command
Lab 15. EIGRP Authentication
Task 1: Configure IPv4 EIGRP Process with a name

Task 5: Enable EIGRP authentication on both neighbors
Lab 16. EIGRP Authentication using named configuration
Task 3: Enter IPv4 EIGRP Process with a name
Task 4: Enter address-family IPv4 for your AS
Task 5: Enter address-family interface mode
Task 6: Enable EIGRP authentication on both neighbors
Lab 17. EIGRP Summarization
Task 1: Configure 4 loopbacks with network addresses in sequence
Task 2: Disable auto-summarization in EIGRP Process
Task 4: Summarize EIGRP routes on outgoing interfaces

Task 6: Verify creation of null interface in routing table
Task 7: Analyze administrative distance of summary
Lab 17. EIGRP Summarization
Task 2: Disable auto-summarization in EIGRP Process

www.rstforum.net
Lab 18. EIGRP Summarization using named configuration

Task 3: Enter address-family interface mode
Lab 19. EIGRP redistribution
Task 2: Redistribute these connected networks in EIGRP process
Task 4: Analyze administrative distance of redistributed route in neighbor router
Task 5: Analyze network type as D ex in neighbor router routing table

Lab 20. EIGRP redistribution using named configuration
Task 3: Enter topology base configuration mode
Task 4: Redistribute these connected networks in EIGRP process
Lab 21. EIGRP Stub
Task 1: Configure loopbacks with network addresses in sequence
Task 2: Configure EIGRP stub with connected option
Task 3: Configure EIGRP stub with connected static option
Task 4: Configure EIGRP stub with receive only option
Task 6: Configure no auto summary
Lab 22. EIGRP Stub using named configuration
Task 3: Configure EIGRP stub with connected option
Task 4: Configure EIGRP stub with connected static option
Task 5: Configure EIGRP stub with receive only option
www.rstforum.net

Lab 23. EIGRP Tweaks
Task 1: Change K Values in EIGRP Process using metric weight commands
Task 2: Verify neighborship using show ip eigrp neighbor command
Task 3: Change Maximum path for load-balancing, default is 4
Task 4: Verify using show ip protocols command
Task 5: Change EIGRP maximum hopcount, default is 100
Lab 24. EIGRP Tweaks using named configuration
Task 1: Change K Values in EIGRP Process using metric weight commands
Task 2: Verify neighborship using show ip eigrp neighbor command
Task 3: Change Maximum path for load-balancing, default is 4

Task 5: Change EIGRP maximum hopcount, default is 100
Lab 25. Configuring RIPng for IPv6
Task 1: Configure Interface IPv6 address
Task 3: Create RIPng Process for IPv6 and provide routing process name
Task 4: Enable RIPng on interfaces

Task 6: Verify IPv6 routing table and RIP route entries
Lab 26. IPv6 RIPng Passive-interface
Task 1: Configure passive-interface command in RIPng Process
Task 5: Verify IPv6 routing table and RIP routes
Lab 27. IPv6 RIPng Authentication
Task 3: Enable RIPng authentication
Task 5: Analysis of debug command for IPv6
Task 6: Verify IPv6 routing table
www.rstforum.net
Lab 28. IPv6 RIPng Default Network

Task 2: Configure RIPng
Task 5: Verify using IPv6 ping
Lab 29. IPv6 RIPng Summarization
Task 1: Configure IPv6 block of 4 networks in sequence
Task 2: Verify routes on neighbor router IPv6 routing table
Task 4: Verify receipt of summary route in neighbors IPv6 routing table
OSPF:
Lab 30. Configuring OSPF for IPv4
Task 1: Configure IPv4 OSPF process for Autonomous
Task 4: Verify OSPF updates are sent on relevant interfaces
Task 5: Verify OSPF neighborship
Task 6: Verify OSPF topology table
Task 7: Verify routing table and OSPF route entries
Lab 31. OSPF Authentication

Task 1: Configure IPv4 OSPF Process with a name
Task 5: Enable OSPF authentication on both neighbors
Task 7: Verify OSPF neighborship
Lab 32. OSPF Summarization
Task 2: Disable auto-summarization in OSPF Process
Task 4: Summarize OSPF routes on outgoing interfaces
Lab 33. OSPF redistribution
Task 2: Redistribute these connected networks in OSPF process
www.rstforum.net

Lab 34. OSPF Stub
Task 2: Configure OSPF stub with connected option
Task 3: Configure OSPF stub with connected static option
Task 4: Configure OSPF stub with receive only option
Lab 35. OSPF Totally Stubby Area
Task 2: Configure OSPF totally stub area with stub no-summary command
Task 3: Verify routes on router routing table

Lab 36. OSPF Not So Stubby Area (NSSA)
Task 2: Configure OSPF not so stubby area with nssa command
Lab 37. OSPF Virtual Link
Task 1: Configure IPv4 OSPF Process with Area2 is not connected to backbone
area
Task 3: Configure IPv4 OSPF virtual link
Task 4: Verify virtual link is up
Lab 38. Configuring OSPF for IPv6
Task 1: Configure IPv6 OSPF process for Autonomous
Task 4: Verify IPv6 OSPF updates are sent on relevant interfaces
Task 5: Verify IPv6 OSPF neighborship
Task 6: Verify IPv6 OSPF topology table
Task 7: Verify routing table and IPv6 OSPF route entries
Lab 39. OSPF Authentication for IPv6
Task 1: Configure IPv6 OSPF Process with a name
Task 5: Enable IPv6 OSPF authentication on both neighbors
Task 6: Verification of authentication for IPv6
Task 7: Verify IPv6 OSPF neighborship
www.rstforum.net
Lab 40. OSPF Summarization for IPv6

Task 2: Disable auto-summarization in IPvc6 OSPF Process
Task 3: Verify IPv6 routes on neighbor router routing table
Task 4: Summarize IPv6 OSPF routes on outgoing interfaces
Task 5: Verify IPv6 receipt of summary route in neighbors routing table
Task 6: Verify IPv6 creation of null interface in routing table
Task 7: Analyze IPv6 administrative distance of summary
Lab 41. OSPF redistribution for IPv6
Task 2: Redistribute these connected networks in IPv6 OSPF process

Lab 42. OSPF Stub for IPv6
Task 2: Configure IPv6 OSPF stub with connected option
Task 3: Configure IPv6 OSPF stub with connected static option
Task 4: Configure IPv6 OSPF stub with receive only option
Lab 43. OSPF Totally Stubby Area for IPv6
Task 2: Configure IPv6 OSPF totally stub area with stub no-summary command
Task 3: Verify IPv6 routes on router routing table
Lab 44. OSPF Not So Stubby Area (NSSA) for IPv6
Task 2: Configure IPv6 OSPF not so stubby area with nssa command
Lab 45. OSPF Virtual Link for IPv6
Task 1: Configure IPv6 OSPF Process with Area2 is not connected to backbone
area
Task 3: Configure IPv6 OSPF virtual link
Task 4: Verify virtual link is up
BGP
Lab 46. Configuring BGP for IPv4
Task 1: Configure IPv4 BGP process for Autonomous
Task 3: Configure IPv4 OSPF Process
www.rstforum.net
Task 5: Announce the network in BGP Process

Task 6: Verify routing table and BGP route entries
Task 7: Verify BGP neighborship
Task 8: Verify routes entries in BGP table
Lab 47. Configure BGP AS-PATH Attribute
Task 1: Configure loopback and configure in IPv4 OSPF with network command
Task 2: Announce loopback in BGP process
Task 4: Prepend AS for as-path manipulation with route-map policy
Task 5: Verification of as-path manipulation in BGP table
Lab 48. Configure BGP Local Preference Attribute
Task 2: Announce loopback in BGP process
Task 4: Configure local preference manipulation with route-map policy
Task 5: Verification of local preference manipulation in BGP table
Lab 49. Configure BGP MED Attribute
Task 1: Configure multiple interface to reach single AS
Task 2: Configure interfaces in IPv4 OSPF process with network command
Task 3: Announce interfaces in BGP Process
Task 5: Configure selective route manipulation using MED with route-map policy
Task 6: Verification of selective route manipulation in BGP table
Lab 50. BGP Summarization

Task 2: Configure summarization with aggregate-address command
Task 3: Verify receipt of summary route in neighbors BGP table
Task 4: Configure summarization with summary-only command
Task 6: Configure summarization with as-set command
Lab 51. BGP Summarization with Prefix List
Task 1: Summarize with BGP routes in router mode with Pre-fix Address
Task 2: Verify receipt of summary route received in neighbor routers bgp table
Lab 52. BGP Community String
Task 1: Configure community string attribute with send-community command
Task 2: Verify community string on neighbor router
Task 3: Configure community string manipulation on neighbor router
Lab 53. BGP Route Reflector
Task 1: Configure IPv4 BGP Process for Autonomous
www.rstforum.net

Task 5: Verify routing table and BGP route entries
Task 6: Verify BGP neighborship
Task 8: Configure BGP Route Reflector
Task 9: Verify IPv4 BGP routes
Lab 54. Configuring BGP for IPv6
Task 4: Activate neighbor
Task 8: Verify IPv6 routing table and IPv6 BGP routes entries
Task 9: Verify IPv6 BGP neighborship
Task 10: Verify routes entries in IPv6 BGP table
Lab 55. Configure IPv6 BGP AS-PATH Attribute
Task 2:Announce loopback in IPv6 BGP process
Task 4: Prepend AS for as-path manipulation with route-map policy
Task 5: Verification of as-path manipulation in IPv6 BGP table
Lab 56. Configure BGP Local Preference Attribute
Task 1:Configure loopback and configure in IPv6 OSPF with network command
Task 2: Announce loopback in IPv6 PBGP process
Task 4: Configure local preference manipulation with route-map policy
Task 5: Verification of local preference manipulation in IPv6 BGP table
Lab 57. Configure IPv6 BGP MED Attribute
Task 1: Configure multiple interface to reach single AS
Task 2: Configure interfaces in IPv6 OSPF process with network command
Task 3: Announce interfaces in IPv6 BGP Process
Task 5: Configure selective route manipulation using MED with route-map policy
Task 6: Verification of selective route manipulation in IPv6 BGP table
Lab 58. BGP Summarization for IPv6
Task 2: Configure summarization with aggregate-address command
Task 3: Verify receipt of summary route in neighbors IPv6 BGP table
Task 4: Configure summarization with summary-only command
Task 6: Configure summarization with as-set command
www.rstforum.net
Lab 59. BGP Summarization with Prefix List

Task 1: Summarize with BGP routes in router mode with Pre-fix Address
Task 2: Verify receipt of summary route received in neighbor routers bgp table
Lab 60. Configure IPv6 BGP Community String Attribute
Task 1:Configure community string attribute with send-community command

Task 2: Verify community string on neighbor router
Task 3: Configure community string manipulation on neighbor router
Lab 56. BGP Route Reflector
Task 4: Activate neighbor
Task 8: Verify IPv6 routing table and IPv6 BGP routes entries
Task 9: Verify IPv6 BGP neighborship
Task 11: Configure BGP Route Reflector
Task 12: Verify IPv6 BGP routes
www.rstforum.net
VIRTUAL CLASSROOM
INSTRUCTOR LED ONLINE TRAINING
IS AN IDEAL VEHICLE FOR
DELIVERING TRAINING TO
INDIVIDUALS ANYWHERE IN THE
WORLD AT ANY TIME.
THIS INNOVATIVE APPROACH
PRESENTS LIVE CONTENT WITH
INSTRUCTOR DELIVERING THE
TRAINING ONLINE.
CANDIDATES WILL BE PERFORMING
LABS REMOTELY ON OUR LABS ON
CLOUD IN PRESENCE OF AN ONLINE
INSTRUCTOR.
RSTFORUM USES MICROSOFT LYNC
ENGINE TO DELIVER INSTRUCTOR
LED ONLINE TRAINING.
ADVANCES IN COMPUTER NETWORK

TECHNOLOGY, IMPROVEMENTS IN
BANDWIDTH, INTERACTIONS, CHAT
AND CONFERENCING, AND REALTIME AUDIO AND VIDEO OFFERS
UNPARALLELED TRAINING
OPPORTUNITIES.
CAN HELPS TODAYS BUSY
PROFESSIONALS TO PERFORM THEIR
JOBS AND UPGRADE KNOWLEDGE
BY INTEGRATING SELF-PACED
IN THEIR DAILY ROUTINES.
LAB EQUIPMENT AT RSTFORUM

Cisco Switch 2950 (Multiple)

Cisco Nexus 5K and 7K
Cisco Router 6509 SUP 720
Cisco Router 2800 (Multiple)
Cisco Router 7206 VXR (Multiple)
Cisco Router 7609 SUP 720
Cisco MCS Server Call Manager (Multiple)
Cisco IP Phone 7900 (Multiple)
Cisco ASA/PIX Firewall (Multiple)
Cisco IDS/IPS (Multiple)
CCIE R&S v5.0 Rack
CCIE SP Rack
CCIE Security Rack
CCIE Voice Rack
Servers (Multiple)
Relevant cables and modules
Terminal Servers
www.rstforum.net
MISCELLANEOUS:
Minimum batch size required for batch is 10 participants in the CCNP.
The RST Forum reserves the right to cancel/postpone the class.

Course schedule will be provided before commencement of the course.
Certificate of participation will be awarded to participants with a minimum 90% attendance

All attendees are to observe the Copyright Law on intellectual properties such as software
and courseware from respective vendors

The RST Forum reserves the right to include external participants in the program either for
the entire CCNP or individual courses
The RST Forum reserves the right to change/alter the sequence of courses.
RST FORUM published Book would be given at 50% discounted rate to the forum students
GENERAL TERMS & CONDITIONS :

Fees refund if you are not satisfied with training provided.
Fees Refund Policy:
Students with minimum 90% attendance are eligible for fees refund.
Fees Refund will not be provided to students wanting to leave course midway
Students that are not satisfied with the training provided will be advised to repeat
the course and RSTForum Will take all possible efforts to make sure that candidate
achieves excellence in that subject.
Processing fees of Rs.1500/- and a service tax of 12.36% will be deducted from
refund amount.
The RST Forum reserves the right to amend/ modify Fees refund policy.
Fees Refund claim will not be entertained after last lecture of the enrolled course.
EXAM VOUCHER AND COURSEWARE:

Exam vouchers and cisco courseware will be charged extra at actuals.
Reference materials: Many reference materials are available on returnable basis
www.rstforum.net
TRAINING - CONSULTING - STAFFING SUPPORT

www.rstforum.net
Established in 1997, RST Forum is one of the most popular training organizations for
professional courses and technology learning. RST Forum founded by infrastructure and
communication technology industry professionals to exchange information, share experience,
create expertise and establish professional connections. Forum was built on the idea that no
expert knows all solutions as does the group of professionals and strongly believes that the
best way to learn is by asking others and learning from experience
The goal of this forum is to encourage greater co-operation and collaboration amongst group of
infrastructure and communications professionals by sharing information, resources, and
experiences. To achieve its goal forum conducts technology workshops, technology update
sessions, trainings for industry certification, technology advisory meet, professionals meet for
emerging technology and innovations discussions, etc.
RST Forum's prime collaboration mechanism is providing comprehensive trainings on industry
certifications from Cisco, Microsoft, Redhat and others. These trainings are conducted by
industry acclaimed, experienced working professionals who have extensive hands-on
experience in designing and deploying solutions. These thorough hands-on trainings are
provided with an aim to create skilled professional with real understanding of technology and
its application. These certified instructors and CCIE professionals make participants practice on
exercises and case studies that reflect real-world situations, so skills developed by these
training are immediately useable on the job. Forums Lab hosts high end devices and
equipment. Lab facilities are also available on cloud for our students to practice at their ease.
This substantiates forums belief that "all taught in class should be proved, demonstrated and
practiced by all participants."
CONTACT
Mumbai: 401, Telang Road, above Nalli showroom, Matunga East (C.R.), Mumbai-400019.
Tel: (022) 24034949; (022) 24105262; (022) 65653338; (022) 65653339;
(91) 9167224466; (91) 9819059899; (91) 9820611290.
Pune: 36A, Shrinath Plaza, Dyneshwar Paduka Chowk, Fergusson College Road, Shivajinagar, Pune 411005. Tel: (020) 4120 0959.
www.rstforum.net

Ingenious 69 Practice Labs: Routing Switching Tigers Forum

Uploaded by

Copyright:

Available Formats

Ingenious 69 Practice Labs: Routing Switching Tigers Forum

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ingenious 69 Practice Labs: Routing Switching Tigers Forum

Uploaded by

Copyright:

Available Formats

Routing

fees refund if you are not an expert

RSTFORUM AT GLANCE FOR YOU

prepare for industry-recognized certifications

flexible solutions for

maintain the infrastructure needed to communicate and do

business. This shortage exists worldwide, particularly in

works with potential candidates to enhance their skills and

required for installing, monitoring, and troubleshooting

9 CRASH COURSE AVAILABLE

The CCNP R&S certification validates the ability to install,

For network engineers who aspire to plan, implement, verify

WANs. The exam certifies the routing knowledge and skills

Implementing Cisco IP Switched Networks (SWITCH 642-813)

CCNP R&S COURSE TOPIC . .

UNDERSTAND NETWORK TECHNOLOGIES AND CONNECTING REMOTE

CONFIGURE AND VERIFY BASIC ROUTING:

Configure and verify default routing

Describe administrative distance

CONFIGURE AND VERIFY LOOP PREVENTION MECHANISMS:

Determine network resources needed for implementing EIGRP in a network

Document the verification results for an EIGRP implementation

IMPLEMENT AN IPV6 BASED SOLUTION, GIVEN A NETWORK DESIGN AND REQUIREMENTS:

Create an IPv6 verification plan

IMPLEMENT AN IPV4 OR IPV6 BASED REDISTRIBUTION SOLUTION:

Configure a redistribution solution

IMPLEMENT A MULTI-AREA OSPF NETWORK, GIVEN A NETWORK DESIGN AND

Determine network resources needed for implementing OSPF on a network

IMPLEMENT LAYER 3 PATH CONTROL SOLUTION:

Configure basic broadband connections

Following Topics will be covered in CCNP 300-115 Course.

Configure and verify Layer 2 protocols

CONFIGURE AND VERIFY TRUNKING:

CONFIGURE AND VERIFY SPANNING TREE:

PVST+, RPVST+, MST

CONFIGURE AND VERIFY OTHER LAN SWITCHING TECHNOLOGIES:

Local privilege authorization fallback

Determine network resources needed for implementing a Security solution

Configure private VLANs

Configure VACL and PACL

Configure routing interfaces

IMPLEMENT HIGH AVAILABILITY, GIVEN A NETWORK DESIGN AND A SET OF REQUIREMENTS:

Implement first hop redundancy protocols

HIGH AVAILABILITY NETWORKS:

SPAN and RSPAN Introduction

Following Topics will be covered in CCNP 300-135 Course.

Ping and trace route with extended options

Troubleshoot Err-disable recovery

Troubleshoot chassis virtualization and aggregation technologies

Troubleshoot default routing

RD, FD, FC, successor, feasible successor

Troubleshoot EIGRP stubs

Management plane protection

IPv4 access control lists (standard, extended, time-based)

Troubleshoot Network Time Protocol (NTP)

DHCP options (describe)

TROUBLESHOOT MULTI-PROTOCOL SYSTEM NETWORKS:

Troubleshoot a DHCP client and server solution

Troubleshoot IPv6 routing