Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Getting To Know Your USB Stick: USB Connector Strap Hole

    Uploaded by

    Sohil Kisan
    This document provides instructions for setting up and using a mobile broadband USB stick. It describes the parts of the USB stick, including the USB connector, indicator light, and slots for a SIM card and microSD card. It explains how to insert the SIM and microSD cards, install the management software on a PC, and connect the USB stick. Instructions are also provided for removing the USB stick safely and uninstalling the software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Getting To Know Your USB Stick: USB Connector Strap Hole

    Uploaded by

    Sohil Kisan
    49 views2 pages
    This document provides instructions for setting up and using a mobile broadband USB stick. It describes the parts of the USB stick, including the USB connector, indicator light, and slots for a SIM card and microSD card. It explains how to insert the SIM and microSD cards, install the management software on a PC, and connect the USB stick. Instructions are also provided for removing the USB stick safely and uninstalling the software.

    Original Description:

    Download Center

    Original Title

    Download Center

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for setting up and using a mobile broadband USB stick. It describes the parts of the USB stick, including the USB connector, indicator light, and slots for a SIM card and microSD card. It explains how to insert the SIM and microSD cards, install the management software on a PC, and connect the USB stick. Instructions are also provided for removing the USB stick safely and uninstalling the software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views2 pages

    Getting To Know Your USB Stick: USB Connector Strap Hole

    Uploaded by

    Sohil Kisan
    This document provides instructions for setting up and using a mobile broadband USB stick. It describes the parts of the USB stick, including the USB connector, indicator light, and slots for a SIM card and microSD card. It explains how to insert the SIM and microSD cards, install the management software on a PC, and connect the USB stick. Instructions are also provided for removing the USB stick safely and uninstalling the software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Thank you for choosing the Mobile Broadband USB

    Stick. With your USB Stick, you can access a wireless


    network at high speed.
    Note:
    This manual describes the appearance of the USB Stick, as well as the procedures for
    preparation, installation, and removal. For operation details about the management
    program, see the online help included in the management program.

    Getting to Know Your USB Stick


    The following figure shows the appearance of the USB Stick. It is provided only for your
    reference. The actual product may be different.

    2
    1
    2

    n USB Connector
    It connects the USB Stick to a PC.

    o Strap Hole
    You can tie the cap and the USB Stick together by threading a strap through the strap holes,
    so that the cap will not be easily lost.

    p Indicator
    It indicates the status of the USB Stick.
    z Solid: The USB Stick is powered on.
    z Blinking once every 2s: The USB Stick is searching for a network or no network is found.
    z Blinking twice every 2s: The USB Stick finds a network.
    z Blinking once every 0.2s: The USB Stick is transmitting data.

    q MicroSD Card Slot


    It holds a microSD card.

    r UIM Card Slot


    It holds a User Identity Module (UIM) card.

    Getting Your USB Stick Ready


    1. Slide the back cover to remove it from the USB Stick.
    2. Insert the UIM card and the microSD card into the corresponding card slots, as shown in
    the following figure.
    3. Replace the back cover and slide it into place.

    Note:
    z The microSD card is an optional accessory. If it is not provided in the package, you can
    buy one yourself.
    z Ensure that the beveled edge of the UIM card is properly aligned with that of the UIM
    card holder and the microSD card is inserted according to the direction as labeled on
    the microSD card slot.
    z Do not remove the microSD or UIM card when the card is in use. Otherwise, the card as
    well as your USB Stick may get damaged and the data stored on the card may be
    corrupted.

    Installation/Removal Guide
    The procedure for installing the management program depends on the operating system
    (OS) installed on your PC. The following sections take Windows XP as an example.

    Connecting the USB Stick to a PC


    Plug the USB Stick into the USB port of your PC.

    Installing the USB Stick Management Program


    1. Connect the USB Stick with the PC.
    2. The OS automatically detects and recognizes the new hardware and starts the
    installation wizard.
    Note:
    If the auto-run program does not respond, find the AutoRun.exe file in the driver path.
    Then double-click AutoRun.exe to run the program.
    3. Follow the on-screen instructions of the installation wizard.
    4. After the program is installed, a shortcut icon for the management program appears on
    the desktop.

    Starting the Management Program


    After being installed, the management program starts automatically. Then every time the
    USB Stick is connected to the PC, the management program starts automatically.
    You can also double-click the shortcut icon on the desktop to start the management
    program.

    Removing the USB Stick


    1. Double-click
    in the notification area. Then the Unplug or Eject Hardware dialog
    box appears.
    2. Select the corresponding hardware and then click Stop.
    3. When the message "It is safe to remove the device" appears, remove the USB Stick.

    Uninstalling the Management Program


    1. Choose Start > Control Panel > Add or Remove Programs.
    2. Find the management program and click Remove to uninstall the management
    program.
    Note:
    Exit the management program before uninstalling it.

    Version: V100R001_01

    Part Number: 31010EQE

    You might also like