JNT Inc

JNT INC
Construction Chemical Company
www.jntinc.co.kr
www.jntinc.co.kr
CONTENTS
JNT overview
01.
Product list
02.
Products
03.
a. Polycarboxylate Copolymer
b. Cement Grinding Aid
c. Water-repellent & Water-proofing Agent
d. Shrinkage Control Admixture
e. Mold Release agent
f. curing compound
g. Concrete Surface Hardner
02
Product list
Category
Polycarboxylate
Product Name
AP-50
High range Water Reducer Type A
AP-50B
High range Water Reducer Type B
APR-50
Slump Type Water Reducer
KP-50
Slump Retention Type A
KP-501
Slump Retention Type B
HP45
Air-Entrainer
Deformer
Early strength
AE-100
Air entraining agent for Local concrete Market
AE-300
AE-300 shows better performance in stability than AE-100 Especially in low temperature.
KDF-1
DF-1 is a deforming agent. It decrease entrapped air content in concrete during mixing.
CQA-100
To enhance the output and lower power consumption in clinker grinding process
CQA-200
For raw materials such as limestone, clay etc in cement plants. Designed for enhancing
the output and lower power consumption in grinding process for raw materials.
CQA-300
For grinding cement clinker in cement mills.

Designed for enhancing a higher strength at the early and long-time stage.
Shrinkage control Admixture
SCA-30B
To reduce drying shrinkage of concrete and mortar and the potential for subsequent cracking.
Water-repellent &
Water-proofing Agent
WR&P-100(org)
Concrete Mould Release Agent
MS-1
Curing Compound
J-cure 20
Concrete surface hardner
SX-30
Cement Grinding Aid
Constrcution
Chemical
Description
Grout for Semi-rigid Asphalt-Cement

Composite
WR&P-50S
Oil nature type penetrating water repellent & water proofing agent
Water base penetrating water repellent & water proofing agent
Water based emulsion solution.
To retain moisture in concrete for effective curing.
designed for industrial floors and provides long-term Savings and improved plant efficiency
WF-HPC100
WF-HPC100 is a high flowing grout that is used for road paving with porous Asphalt concrete.
After 7 days from placing, it gains a compressive strength of 21MPa.
WF-HPC200
WF-HPC200 is a high flowing grout that is used for road paving with porous Asphaltconcrete.
After 3 hours from placing, it gains a compressive strength of 7.0MPa. So, it is normally used
for the repair works and in urgent case.
WF-HPC300
WF-HPC300 is a high flowing grout that is used for road paving with porous Asphaltconcrete.
After 3 hours from placing, it gains a compressive strength of 21MPa. it is possible to substitute
WF-HPC300 for concrete paving on bridges.
WF-NT
WF-NT is a powdered accelerator for shotcrete.

The dosage of normal use is 5% to 10% of weight of cement.
WF-NTE
WF-NTE give shotcrete the high strength at the early stage. As use of 10% of weight of
cement, it is possible to get 3MPa, compressive strength, of shotcrete at 1 hour of placing.
Additives for Shotcrete
Accelerating Agent
WF-5000
WF-5000 is a accelerator with the ettringite system for cement, mortar and
concrete that gets hardening time faster than normal one.
It is normally used by 3% to 10% by cement weight.
Admixture
WF2000
WF2000 is a superplasticizer that is effective for steam curing concrete and PHC Pile.
A concrete with WF2000 can get higher strength than a normal concrete at the early age.
Very-early Strength Cement
VESCON
VESCON is a quick hardening cement mixture for concrete that is used for urgent working
place or indoor. It gains a compressive strength of 20 to 40 MPa after 3 hours of
placing in concrete.
Special Cement
CERART
CERART is a blended special cement compound that is used to make a mold and statue.
It is a light weight, high strength at the early age and non-shrinkage property.
Accelerator
QuickTar
QuickTar is a accelerator that is used for earth anchor works.

It gains a high strength of 21MPa at 24 hours after placing.
It is usual to mix 80%of premixed mortar and 20% of QuickTar in field.
Grout Material
ECG
CSA Cement
HD-PM
HD-PM is a CSA cement for high strength and early strength mortar and concrete.
It can also be used as an ingredient for cement accelerator admixture.
Expansive
HD-EX
HD-EX is a very stable, effective expansion agent in cement product. Typically used in
non-shrinkage mortar and concrete. Also used to induce chemical pre-stress in concrete products.
ECG is an eco-friendly soilgrout for soil grouting works. It is consist of 3 components.

One is cement, another is ECG1000 of co-polymer, and the third is ECG2000 of calcium
aluminate compound.
03
www.jntinc.co.kr
About JNT
JNT is markets leading construction chemical company and produce an extensive range of specialized construction chemicals.
Through wealth of field experience, technical knowledge and innovation, we enable our customers in the construction
industries to meet the current and future needs.
JNTs R&D
JNTs R&D has developed partnership with various university and public research institutes and close to the field and
customers. With state of art equipment and continuous investment of new technologies, we have new generation product
of polymers and formulated products.
To meet rapidly changing market trend and products needs of customers, JNT has been focusing on field and develop
new products
Key History
2006 creation of JNT
2006 2009 Produce special cement & PC admixture
2010 Established Kim-JE fine chemical plant
2012 Hit billion dollar exporting award.
Business Area
Construction and building
Construction and Fine Chemicals
Consulting for cement industries
04
Polycarboxylate
Copolymer
ITEM
Polycarboxylate Copolymer
Product
AP-50
AP-50B
APR-50
KP-50
KP-501
HP-45
Type
Water
Reducer
Type A
Water
Reducer
Type B
Slump Type
Water
Reducer
Slump
Retention
Type A
Slump
Retention
Type B
Early
strength
Appearance
Brown Liquid
Brown Liquid
Light Yellow
Liquid
Brown Liquid
Brown Liquid
Brown Liquid
Solid Content %
501
501
501
501
501
451
pH value
42
42
42
42
42
42
Viscosity (cps)
1,000 Max.
1,000 Max.
1,000 Max.
1,000 Max.
1,000 Max.
1,000 Max.
Specific Gravity
1.100.04
1.100.04
1.100.04
1.100.04
1.100.04
1.100.04
Dosage %
(20% base)
0.06 ~ 2.0
0.06 ~ 2.0
0.06 ~ 2.0
0.06 ~ 2.0
0.06 ~ 2.0
0.06 ~ 2.0
Packing
* 230Kg Drum (80EA)
*1.1 IBC Tank (18EA)
*21MT Flexi Tank (1EA)
05
www.jntinc.co.kr
EXFLOW
AP50
(High Range Water Reducing Agent)

New generation Polycarboxylic ether
concentration for high performance concrete
PRODUCT DESCRIPTION
EXFLOW AP50 is polycarboxylate polymer based superplasticizer
which has excellent water reduction ability and designed for
self-compacting concrete and a good flow ability.
Free from chlorides and complies with ASTM C494 Type A and G.
Compatible with all Portland cements and pozzolanics that meet
recognized international standards.
ADVANTAGES
Excellent water reduction ability with a good fluidity.
Self-compacting concrete
Higher compressive strength with low W/C
Improvement of durability of the concrete
Available for pre-cast concrete
APPLICATION
The excellent dispersion properties of EXFLOW AP50 makes it the
ideal admixture for precast and ready-mixed concrete where low
water cement ratios are required.
This property allows the production of very high ultimate strength
concrete with minimal voids.
High workability without segregation or bleeding
Less vibration required
Can be placed and compacted in congested reinforcement
Reduced labor requirement
Improved surface finish
DOSAGE
The normal dosage rate (20wt% of solid content base) is between 0.5
and 1.6 liters per 100kg of cement (cementitious material) depending
on specific mix design and requirement.
In case of special job conditions, dosage may be consulted by JNT
Technical Service Team.
06
PERFORMANCE DATA
Mix
Design
W/C
S/A
25-35-500
44.1
42.0
Unit weight of material(kg/m3)

W
OPC
AD(%)
185
420
700
994
0.7
Slump / Flow (mm)
ITEM
AP-50
Remark
Sol. 20% /
Deformer 0.2%
Compressive Strength (Mpa)
0 Min
30 Min
60 Min
90 Min
3 days
7 days
28 days
610
570
480
370
23
38
55
FLOW
STRENGTH
800
60
600
40
400
20
200
0
0 min
30 min
60 min
90 min
3 days
7 days
28 days
SHELF LIFE & PRECAUTIONS

By 12month, if stored according to manufacturers instructions.
EXFLOW AP50 contains no hazardous substances however if it is contacted on skin or clothes need to
be washed with enough flowing water.
Do not use with naphthalene based admixtures
07
www.jntinc.co.kr
EXFLOW
AP50B
(High Range Water Reducing Agent)

New generation Polycarboxylic ether
concentration for high performance concrete
PRODUCT DESCRIPTION
EXFLOW AP50B is polycarboxylate polymer based superplasticizer
which has excellent water reduction ability and designed for
self-compacting concrete and a good flow ability.
Free from chlorides and complies with ASTM C494 Type A and G
ADVANTAGES
Excellent water reduction ability with a good fluidity.
Self-compacting concrete
Higher compressive strength with low W/C
Available for pre-cast concrete
APPLICATION
The excellent dispersion properties of EXFLOW AP50B makes it the
ideal admixture for precast and ready-mixed concrete where low
water cement ratios are required.
This property allows the production of very high ultimate strength
concrete with minimal voids.
Less vibration required
Can be placed and compacted in congested reinforcement
Reduced labor requirement
DOSAGE
Technical Service Team.
08
PERFORMANCE DATA
Mix
Design
W/C
S/A
25-35-500
44.1
42.0

W
OPC
AD(%)
185
420
700
994
0.7
Slump / Flow (mm)
ITEM
AP-50B
Remark
Sol. 20% /
Deformer 0.2%
0 Min
30 Min
60 Min
90 Min
3 days
7 days
28 days
620
590
510
400
22.8
36.8
54.7
FLOW
STRENGTH
800
60
600
40
400
20
200
0
0 min
30 min
60 min
90 min
3 days
7 days
28 days

EXFLOW AP50B contains no hazardous substances however if it is contacted on skin or clothes need to
09
www.jntinc.co.kr
EXFLOW
APR50
(Slump type Water Reducer)
Excellent retention performance and powerful

dispersing effect
PRODUCT DESCRIPTION
EXFLOW APR-50 is polycarboxylate polymer based superplasticizer
which designed for slump type concrete
EXFLOW APR-50 has excellent retention performance with a good
water reducing ability.
Free from chlorides and complies with ASTM C494 Type A and G.
recognized international standards
ADVANTAGES
Maintain the flow-ability of the concrete for a long time.
High slump & excellent slump retention
Make it possible for long transportation
Reduction of labor and energy costs by high workability of concrete
APPLICATION
EXFLOW APS-50 is designed for high strength concrete having
low W/C ratio
High performance concrete
DOSAGE
The normal dosage rate (20wt% of solid content base) is between
0.5 and 1.6 liters per 100kg of cement (cementitious material)
depending on specific mix design and requirement.
In case of special job conditions, dosage may be consulted by
JNT Technical Service Team for advice
10
PERFORMANCE DATA
Mix
Design
W/C
S/A
25-35-500
44.1
42.0

W
OPC
AD(%)
185
420
700
994
0.7
Slump / Flow (mm)
ITEM
APR-50
0 Min
30 Min
60 Min
90 Min
3 days
7 days
28 days
530
520
480
440
21.8
34.5
53.8
STRENGTH
600
60
400
40
200
20
0 min
Sol. 20% /
Deformer 0.2%
FLOW
Remark
30 min
60 min
90 min
3 days
7 days
28 days

EXFLOW APR50 contains no hazardous substances however if it is contacted on skin or clothes need to
11
www.jntinc.co.kr
EXFLOW
KP50
(Slump Retention)
New generation Polycarboxylic ether concentration

for high performance concrete
PRODUCT DESCRIPTION
A raw material for superplasticizers of a new generation based on
modified polycarboxylic ether polymers with super retention
technology.
The excellent dispersion effect makes EXFLOW KP50 the ideal
raw material for admixtures for ready mix concrete industry, when
superior performance is required, even under severe conditions.
Combines exceptional long slump life with normal setting times.
Does not contain added chloride and conforms to chloride ion
limits required by concrete industry standards.
ADVANTAGES
APPLICATION
The extended slump life of EXFLOW KP50, concrete is ideally suited
to pre-mix concrete.
It allows plant dosing to occur with little or no slump loss between
dosing and placement (travel time). As no extended retardation
accompanies this extended work life, normal finishing times are
experienced on site.
To long distance transportation
To keep slump retention under hot weather
12
DOSAGE
It depends on the mix design, the ambient conditions and the degree of water reduction and workability required.
The normal dosage rate (20wt% of solid content base) is between 0.5 and 1.6 liters per 100 kg of cement
(cementitious material) depending on specific mix design and requirement.
In case of special job conditions, dosage may be consulted by JNT Technical Service Team for advice
PERFORMANCE DATA
Mix
Design
W/C
S/A
25-35-500
44.1
42.0
OPC
AD(%)
185
420
700
994
1.1
Remark
Sol. 20% /
Deformer 0.2%
Slump / Flow (mm)
ITEM
KP50
0 Min
30 Min
60 Min
90 Min
120 Min
150 Min
180 Min
510
480
430
400
370
230
190
FLOW
600
400
200
0
0 min
30 min
60 min
90 min
120 min
150 min
180 min

EXFLOW KP50 contains no hazardous substances however if it is contacted on skin or clothes need
to be washed with enough flowing water.
13
www.jntinc.co.kr
EXFLOW
KP501
(Slump Retention)
New generation Polycarboxylic ether concentration

for high performance concrete
PRODUCT DESCRIPTION
A raw material for superplasticizers of a new generation based on
modified polycarboxylic ether polymers with super retention technology.
The excellent dispersion effect makes EXFLOW KP501 the ideal raw
material for admixtures for ready mix concrete industry, when
superior performance is required, even under severe conditions.
Combines exceptional long slump life with normal setting times.
Does not contain added chloride and conforms to chloride ion
limits required by concrete industry standards.
ADVANTAGES
APPLICATION
The extended slump life of EXFLOW KP501, concrete is ideally
suited to pre-mix concrete.
It allows plant dosing to occur with little or no slump loss between
dosing and placement (travel time). As no extended retardation
accompanies this extended work life, normal finishing times are
experienced on site.
To long distance transportation
To keep slump retention under hot weather
14
DOSAGE
It depends on the mix design, the ambient conditions and the degree of water reduction and workability required.
The normal dosage rate (20wt% of solid content base) is between 0.5 and 1.6 liters per 100 kg of cement
(cementitious material) depending on specific mix design and requirement.
In case of special job conditions, dosage may be consulted by JNT Technical Service Team for advice
PERFORMANCE DATA
Mix
Design
W/C
S/A
25-35-500
44.1
42.0
OPC
AD(%)
185
420
700
994
1.1
Remark
Sol. 20% /
Deformer 0.2%
Slump / Flow (mm)
ITEM
KP-501
0 Min
30 Min
60 Min
90 Min
120 Min
150 Min
180 Min
420
480
540
580
520
460
380
FLOW
800
600
400
200
0
0 min
30 min
60 min
90 min
120 min
150 min
180 min
210 min

EXFLOW KP501 contains no hazardous substances however if it is contacted on skin or clothes need
to be washed with enough flowing water.
15
www.jntinc.co.kr
EXFLOW
HP45
(High early strength type superplasticizer)
PRODUCT DESCRIPTION
EXFLOW HP45 series is high early strength type superplasticizer
for making concretes for with high dispersion and early strength
through introducing diverse changes of molecular weight to the
side-chain of carboxylate polymers. Especially, it has the advantages
to accelerate early strength required on site without relying on seasonal
influences such as the rainy season or wintertime, and it can shorten
work process and reduce construction expenses
ADVANTAGES
Improve the dispersion and accelerate early strength of concrete.
Reduce slump loss and bleeding.
Increased durability of the concrete
Able to make high strength concrete through reducing water use.
Accelerated setting characteristics
APPLICATION
Precast concrete and pre-stress concrete
High early strength applications.
SOC structures including LNG bases, highways, railways, subway
construction and tunnels.
Concrete with high contents of fly ash, blast furnace slag or silica fume.
DOSAGE
Technical Service Team for advice

EXFLOW HP45 contains no hazardous substances however if it is
contacted on skin or clothes need to be washed with enough
flowing water.
16
Cement Grinding Aid

In order to optimize cement or raw materials production at different stages of the manufacturing process,
JNT provides a full range of grinding aids for both clinker and raw meal grinding.
Main Purpose of CQA
Increase grinding process productivity
Reduce production costs
Improve cement quality
Improve cement storage and transportation
ADVANTAGES
CQA-100 : High Efficiency Grinding Aid and Pack Set Inhibitor
CQA-300 : Early & Long term Strength Enhancing Additive
SPECIAL PRODUCT RANGE

We produce and develop tailormade products according to the needs of customers request.
17
www.jntinc.co.kr
CQA-100
High Efficiency Grinding Aid and Pack Set Inhibitor
PRODUCTION DESCRIPTION
CQA-100 is advanced grinding aid different from conventional amine or glycol based grinding aids.
CQA-100 improves mill efficiency by 10% ~ 20% in OPC production
PRODUCT ADVANTAGE
Reduce energy consumption
Improve productivity with same fineness
Enhance strength
Improve cement fluidity
Less dosage than conventional grinding aid
Point of CQA additions (Decrease of energy consumption)
DOSAGE
The recommended dosage is 0.02~ 0.05 wt%. The specific dosage for a mill is affected by properties of clinker
and other raw materials, and machinery equipment and technical parameters of the mill.
The optimum dosage should be determined through laboratory and mill tests.
Dosage
Clinker
CQA-100
0.04
0.04
0.05
0.06
100
200
100
300
40,000
80,000
50,000
60,000
(%)
18
(MT/hr)
(Liter/hr)
CQA-300
Quality/ Early Strength Enhancing Additive
CQA-series are organic chemical cement grinding aids to optimize particle size and prevent re-agglomeration.
It is eliminating the materials which interrupts the cement hydration. Thus CQA improves productivity
and increases strength of the cement.
PRODUCT ADVANTAGE
Enhance early strength. / Better strength than Plain / Improve cement fluidity
less dosage than conventional grinding aid / Reduce energy consumption
Strength
125%
120%
115%
110%
CQA-300
105%
G company
100%
Blank
1D
3D
7D
28D
DOSAGE
The recommended dosage of CQA-300 is 0.01~0.05wt% against clinker
The specific dosage for a mill is affected by properties of clinker and additions, and machinery equipment
and technical parameters of the mill. It should be determined through laboratory and mill trials.
Incase of special job conditions, dosage may be consulted by JNT Technical Service Team for advice
19
www.jntinc.co.kr
CQA-300
Quality/ Early Strength Enhancing Additive
Blaine Value ; cm2/g

90 Min
120 Min
ITEMS
Residue
(%)
Blaine
Blaine
Blank
CQA-100
CQA-200
CQA-300
8.50%
6.40%
7.00%
6.20%
2,250
2,720
2,545
2,685
2,745
3,380
3,325
3,375
Final grinding(3350150 cm2/g)

Time
Blaine
(min,sec)
3452
3,250
3000
3,380
3000
3,325
3000
3,375
Physical property of cement (Mortat Test - KS L ISO 679)
No
W/C
(%)
Flow
(mm)
Blank
CQA-100
CQA-300
50
50
50
165
185
180
1 day
10.9
12.5
13.2
%
100%
115%
121%
3 day
21.5
22.8
23.8
Comp. Strength (MPa)

%
7 day
%
100%
30.2
100%
106%
32.6
108%
111%
34.1
113%
28 day
45.9
49.2
50.5
%
100%
107%
110%
CQA-Series Strength of grinded cement

125
120
115
110
105
Blank
100
CQA-100
95
90
CQA-300
1DAY
3DAY
7DAY
28DAY
Comparing Blank (Plain) with CQA added, there is improvement of strength when using CQA-100,and CQA-300 shows the best early strength in the result.
20
Water-repellent
& Water-proofing Agent
WR&P-50(s)
High Performance Water-repellent & Water-proofing Agent
PRODUCT DESCRIPTION
WR&P-50(S) which is water based organic-inorganic hybrid sol is water-repellent & water-proofing agent
to the surface of cement & concrete application. WR&P-50(S) can adjust its particle size and has an excellent
dispersant performance.
DOSAGE
Excellent moisture-Proofing, water-proofing, water-repellent
Eco-friendly, No harmful to the human body
By formation of thin coating (functional nano particle)
on the surface and inside of concrete, it can reinforce
physical properties of concrete
WR&P-50(S) is functional material for coating formulation.
High durability : Acid-resistance, Alkali-resistance, Salt-damage
resistance, neutralization resistance for a long time.
Control of whitening even on the surface of concrete
Regardless of the size of concrete pore, it can be applied
construction and maintenance
No effect on the color of structures
After installation, plastering and painting jobs are available
Applied
21
www.jntinc.co.kr
WR&P-50(s)
APPLICATION
Water-repellent surface treatment on the new concrete Structure
Water proofing and water repellent treatment on the surface of products of Hume Concrete, brick, concrete
board, gypsum board
Reservoir of water purification plants, water and sewage-related facilities
Neutralization or chemical erosion is concerned, and difficult to maintained basement walls and slab
structures, industrial plant facilities
Slopes, roads and runways
Construction of water repellent and water proofing to the bridge deck and piers of the bridge is possible
FUNCTIONAL MECHANISM
Apply WR&P-50(S) of Si-O hybrid sol to surface of concrete
Concrete structure
When Si-O hybrid sol contact concrete, linear Polymer chain is formed
Concrete structure
Through the hardening process of linear Polymer chain, it makes cross-linking and by forming network
polymer with concrete structure it makes perfect Water repellent and water proofing effect
Concrete structure
22
SPECIFICATIONS
Items
Spec
Remark
Appearance
Milky White
By eye
Solid content (%)
501%
Active Material
pH
4~6
pH meter
Specific gravity (g/ml)
0.980.02
at. 25
GUIDELINES
Ready For Operation
Clean up the surface of the concrete (In case of secondary products, after treatment of surface defects
then apply it
Dosage
Make its solid content to 3 7% sol and apply 300~400 / of WR&P-50(S) by spray, roller, airless machine, brush
Curing Process
After installment, make it dry completely by air dry (it is recommendable to 25, 3~6hr)

Store it over 5.0
When it open, it is recommend to use in a shorten time of period.
Guarantee: 6month
PACKING
18Liter Pail Drum / 180Liter Drum / 1.0 Ton IBC Tank
23
www.jntinc.co.kr
WR&P-100(Org)
WR&P-100(Org) is oily nature type penetrating Water repellent & Water proofing agent.. Good for water repellent
& water proofing efficiencies and showing good penetrating when it is used for Mortal or concrete and safety
against alkali. Strongly protecting the water penetration and protecting the abrasion from freezing or salts.
This is no color, transparent products.
ADVANTAGES
High penetration :
Maximize the function of water repellent &
water proofing by homogenous penetration into
the concrete and cement.
Long term persistent ability
Stable against chemicals
Convenience to use
Easy to use and shortening the working time
Fig.1. Forming of water drops on the surface after using
APPLICATION
Concrete, stone, Red bricks, tiles outside of the structure.
Water repellents on the outside surface which has many pole holes like ALS, concrete blocks.
Concrete pier and concrete structure
If it is used by mixing 5:1 (Aqueous paint 5:Proseal 1) on the concrete outside wall, protect the decolorizing
and showing good water repellent.
If is used with the same way like above 4 on the basement wall, reducing of the forming of moss and deleting
the bad small and good for anti bacteria and easy for cleaning of the wall.
FUNCTIONAL MECHANISM
Concrete structure
Concrete structure
24
Step 1.
Spraying or painting WR&P-100(org), Si-O hybrid sol
on the concrete surface
Step 2.
Si-O hybrid sol is forming linear Polymer chain when it is
contacted to concrete
Concrete structure
Step 3.
Linear Polymer chain is forming network polymer by Cross
-linking to the concrete structure and forming excellent
water repellent & water proofing layer
GUIDELINES FOR USE

Step 1. Surface treatment
1) The concrete surface or structure are fully cured at 20DEG C for 28days.
2) Remove the dusts or impurities on the surface perfectly.
3) Use this products when it is completely dried after the treatment by alkali surface treatment agent and
water if the surface is whitely coloured
4) When you are trying to use the surface which has big sized porous parts on the surface, please use this
products after down sizing the holes on the surface.
Step 2. Way to spraying or painting
1) Spray or paint WR&P by roller, sprayers after treating the surface homogeneously.
2) Spraying or painting one time is enough, but spray or paint 2 times if the surface too much porous.
3) Please keep the sprayer pressure below 0.4kg/cm2 carefully control, the quantity of the water repellent
not to be flowing.
Step 3. Caution
1) Do not use below 5 .
2) Be careful so that the solvent is not evaporated
3) Keep the products after close the cap tightly at 5~35 .
4) Use after fully agitating the products and paint.
SAFETY
After fully understanding of the Material Safety Data Sheet (MSDS)
Avoid contact to eye ad skin directly and do not drink.
Use apron and robber gloves and goggles.
STORAGE
Keep this products at Emulsion status at 5~40
Use the products within 6months after once it is opened.
PACKAGING
18Liter Pail Drum
180Liter Drum
1.0 Ton IBC Tank
25
www.jntinc.co.kr
Shrinkage Control
Admixture
SCA-30B
DESCRIPTION
SCA-30B shrinkage reducing admixture was developed specifically to reduce drying shrinkage of concrete
and mortar, and the potential for subsequent cracking.
SCA-30B admixture functions by reducing capillary tension of pore water, a primary cause of drying
shrinkage.
USES
The advanced effect of reducing drying shrinkage makes it possible to lower shrinkage cracks.
Using SCA-30B is the best choice for high quality for cement mortar and concrete.
Wall and Slab concrete
Underground structure concrete
Repairing structure
Secondary Tunnel Lining
Paving concrete and Pre-cast Items
ADVANTAGES
High performance for reducing drying shrinkage of cement mortar and concrete by advanced surfactant effect.
Increasing effect for reducing drying shrinkage as well as increasing a dosage.
Unchangeable shrinkage reducing effect mixing with general admixture for ready-mixed concrete.
Liquid condition gives you easy and convenient use for mortar or concrete mixture as a part of unit amount,
and makes it possible to control uniform qualities.
26
PERFORMANCE CHARACTERISTICS
SCA-30B admixture does not substantially affect slump. SCA-30B admixture may increase bleed time and
bleed ratio (10% higher). SCA-30B admixture may also delay time of set by 1-2 hours depending upon dosage
and temperature. Compressive strength loss is minimal with SCA-30B admixture.
All projects requiring SCA-30B admixture in concrete applications exposed to freezing and thawing environments
must be pre-approved and require field trials prior to use.
Therefore, contact your local sales representative when concrete treated with SCA-30B admixture is being
proposed for applications exposed to freezing and thawing environments.
GUIDELINES FOR USE

Dosage :
Knowledge of the shrinkage characteristics of the concrete mixture proposed for use is required prior to the
addition of SCA-30B admixture.
The dosage of SCA-30B admixture will be dependent on the desired drying shrinkage and the reduction in
drying shrinkage required. Therefore, it is strongly recommended that drying shrinkage testing be performed
to determine the optimum dosage for each application and each set of materials.
The typical dosage range of SCA-30B admixture is 0.5 to 1.5 gal/yd3 (2.5 to 7.5 L/m3).
However, dosages outside of this range may be required depending on the level of shrinkage reduction needed.
Mixing :
SCA-30B admixture may be added to the concrete mixture during the initial batch sequence or at the jobsite.
The mix water content should be reduced to account for the quantity of SCA-30B admixture used.
If the delayed addition method is used, mixing at high speed for 3-5 minutes after the addition of SCA-30B
admixture will result in mixture uniformity.
STORAGE AND HANDLING

Storage Temperature :
SCA-30B admixture is a potentially combustible material with a flash point of 198 F (92 C). This is substantially
above the upper limit of 140 F (60 C) for classification as a flammable material, and below the limit of
200 F(93 C) where DOT requirements would classify this as a combustible material. Nonetheless, this
product must be treated with care and protected from excessive heat, open flame or sparks. For more
information refer to the MSDS. SCA-30B admixture should be stored at ambient temperatures above 35 F
(2 C), and precautions should be taken to protect the admixture from freezing. If SCA-30B admixture
freezes, thaw and reconstitute by mild mechanical agitation. Do not use pressurized air for agitation.
Shelf Life :
SCA-30B admixture has a minimum shelf life of 12 months. Depending on storage conditions, the shelf life
may be greater than stated. Please contact your local sales representative regarding suitability for use and
dosage recommendations if the shelf life of SCA-30B admixture has been exceeded.
Packaging
SCA-30B admixture is available in 55 gal (208 L)drums and 268 gal (1014 L) totes.
Related Documents
Material Safety Data Sheets:
SCA-30B admixture.
27
www.jntinc.co.kr
Concrete Mould
Release Agent
MS-1
MS-1 is water based emulsion solution. Different with conventional type of mold release agent,
MS-1 is designed environmentally friendly and minimized surface defects such as air hole and odor.
Wall and Slab concrete
Underground structure concrete
Repairing structure
Secondary Tunnel Lining
Paving concrete and Pre-cast Items
PRODUCTION ADVANTAGE
Easy to use and release and maintenance
Less odor and minimized to the risk of human health
Safe from fire
Higher dilution rate
28
APPLICATION
Secondary product of concrete
Sewer boxes, box concrete, culverts, Hume concrete pile
Large precast panels, beams
HOW TO USE
Step 1 : Dilute it water with ratio of 1:1 ~ 5:1
Step 2 : Clean up the mold
Step 3 : Apply it by spraying or brushing or rolling on the mold
SPECIFICATION
Color : milky white
Freeze point : below -4
Boiling point : 100 approx.
Viscosity : 50~300cps
Solubility in water : fully miscible with water
PH : 7 1
Flash point : not available
PACKING
18L CAN / 200L DRUM / 1000L IBC TANK
STORAGE
It is recommended to store in tightly closed packaging.
29
www.jntinc.co.kr
J-Cure 20 Clear
HIGH EFFICIENCY CURING COMPOUND
Uses
As a spray applied membrane to retain moisture in concrete for effective curing.
Suitable for all general concreting applications and of particular benefit for large area concrete surfaces
such as airport runways, roads and bridgeworks.
Advantages
Improved curing of concrete enhances cement hydration and provides a more durable concrete.
Control of moisture loss improves surface quality, reducing permeability, producing a hard wearing,
dust-free surface and mini-missing potential for surface cracking and shrinkage Light reflective grades
mini-miss solar temperature gain.
Spray application reduces labor costs and eliminates the need for alternative curing systems.
STANDARDS COMPLIANCE
All grades of J-Cure 20 Clear give 90% or greater curing efficiency when tested to BS 7542 and comply with
BS 8110 Part 1, clause 6.6.3(c), ASTM C309 and AASHTO M148. J-Cure 20 Clear aluminized complies with the
Specification for Highway Works, clause 1027.
DESCRIPTION
J-Cure 20 Clear concrete curing compound is resin based and is supplied in various pigmented grades.
Clear : Straw liquid drying to a clear film.
Green : As clear grade bur with green fugitive dye.
White : White liquid drying to a white film.
Aluminized : Silver liquid drying to a silver film.
When first applied to a fresh cementitious surface the product forms a continuous, non-penetrating coating.
This coating dries to form a continuous film which provides a barrier to moisture loss ensuring more
efficient cement hydration, improved durability and reduced shrinkage.
The white and aluminized grades contain pigments based on titanium dioxide and aluminum flake respectively
to meet specifications requiring such pigmentation for reduction of solar temperature gain.
30
TECHNICAL SUPPORT
JNT.INC provides a technical advisory service for on-site assistance and advice on admixture selection,
evaluation trials and dispensing equipment. Technical data and guidance can be provided for admixtures
and other products for use with fresh and hardened concrete.
INSTUCTIONS FOR USE

Application
Pigmented grades should be stirred before use to ensure even dispersion of pigment.
J-Cure 20 Clear should be spray applied to the surface of fresh concrete. Application should begin immediately
the concrete is free from surface water. Do not apply if bleed water is forming or present on the concrete surface.
The spray nozzle should be held approximately 450mm from the concrete surface and passed back and forth
to ensure complete coverage. Pump pressure should be maintained to give an even, fine spray.
After spraying, no further application of water or other material is necessary to ensure continued curing.
The concrete surface should not be disturbed until it has sufficient strength to bear surface loads.
The applied film should not be walked on before it is fully dry and care should be taken to ensure that the
film is not broken. J-Cure 20 Clear maul also be applied to the surface or newly hardened concrete immediately
after de-molding. In such case the concrete surface should be sprayed with water to saturate it prior to the
application of J-Cure 20 Clear. Dry surfaces may prevent correct film formation and cause absorption of
the J-Cure 20 Clear which may lead to staining and difficulty in later removal.
Coverage rate
The recommended coverage rate is between 3.5 and 5.0m2/liter(0.200 to 0.285 liter/m2). Coverage rates
outside this recommended range may be used if necessary and suitable to meet specific requirements.
Contact local JNT.INC office or representative for advice in such cases.
EQUIPMENT
Spray equipment producing a fine mist may be used for J-Cure 20 Clear, such as knapsack or motorized
sprayers. The suitability of equipment should be ensured by an application trial.
Equipment cleaning
Spray equipment should be cleaned immediately after use by flushing through with Solvent 103.
Overcoating and removal
J-Cure 20 Clear must be removed from a concrete surface before application of a subsequent coating to
ensure a good bond of the over coated material to the concrete.
J-Cure 20 Clear will be slowly removed by physical abrasion in normal trafficking and exposure.
To ensure complete removal use high pressure water jet or light sand blasting. Non-pigmented grades of
J-Cure 20 Clear will also be slowly broken down by exposure to UV light.
31
www.jntinc.co.kr
Estimating-packaging
J-Cure 20 Clear is available in drum supply. Details of specific packaging volumes are avaliable on request.
UN packaging regulations
All products classified as hazardous which are to be exported overseas, must conform to the current UN
regulations for packaging and documentation.
Standard packaging for KOR requirements may not conform to KOR regulations.
JNT.INC can supply the correct export packaging and with the required documentation for surface transport.
Where JNT.INC are requested to deliver within the KOR and the Purchaser intends to ship onwards, it is
incumbent upon the Purchaser to specify that UN packaging and documentation is required at the time
of quotation and placing of an order. Otherwise, once materials are received, the responsibility rests solely
with the Purchaser. The use of UN packaging may affect the selling price of products.
Refer to the local JNT.INC office or representative.
Storage
J-Cure 20 Clear has a minimum shelf life of 12 months, 6 months for pigmented grades, when stored in
the original unopened containers under normal warehouse conditions.
PRECAUTIONS
Health and safety
J-Cure 20 Clear should not be swallowed or allowed to come into contact with skin and eyes.
Avoid inhalation of vapors and ensure adequate ventilation. Suitable protective gloves and goggles should
be worn. Some people are sensitive to resins and solvents. Barrier creams such as Kerodex Anti-solvent or
Rozalex Anti-paint provide additional skin protection. Should accidental skin contact occur, remove immediately
with a resin removing cream such as Kerocleanse Standard Grade Skin Cleanser or Rozaklens Industrial Skin
Cleanser, followed by washing with soap and water- do not use solvent.
In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed
seek medical attention immediately do not induce vomiting.
For further information consult the Material Safety Data Sheet available for this product.
Health and safety
J-Cure 20 Clear is flammable. Do not expose to naked flames or other sources of ignition.
Flash point : 40
Cleaning and disposal
Spillages of J-Cure 20 Clear should be absorbed onto sand, earth or vermiculite and transferred to suitable
containers. The disposal of excess or waste material should be carried out in accordance with local
legislation under the guidance of the local waste regulatory authority.
32
JNT INC
Construction Chemical Company
33
www.jntinc.co.kr
EXFLOW
SX-30
PRODUCT DESCRIPTION
Exflow SX-30 is high performed liquid type of surface hardener
designed for industrial floors and provides long-term Savings and
improved plant efficiency
(Concrete Surface Hardner)
APPLICATION
Indoors and outdoors
In factories / In gas stations
In garages, parking lots and roads.
Floors exposed to abrasion and contamination
In loading ramps and warehouse.
FEATURE & BENEFIT

Dust free, hard, durable and abrasion resistant
No color and no smell
No after yellowing
Excellent penetration into concrete
Eco-friendly (solventless)
Concrete Sealing
Resistance to oil, grease and chemicals
Easy to clean and maintain.
ASTM - C-304 and ASTM - D- 4060
SPECIFICATIONS
34
Appearance
Clear Liquid
Environment Temp
5.0 C ~ 38.0 C
Number of coating times
1 ~ 2 times
Specific gravity
1.12 0.02
TEST STANDARD
After Sealing
11g/100mL
Before Sealing
20g/100mL
Dosage
0.15~0.25Liter/ (Coat)
It can be different by environment.
Dry time
4 ~ 6hr (8hr is recommended)
It can be different by ambient temp.
PACKING & STORAGE

Available in 200Kgs Close Type Drum / 20L Pail
It is recommended to store in tightly closed packaging

EXFLOW SX-30contains no hazardous substances however if it is contacted on skin or clothes need to
Case Studies
Applications
Newly constructed parking lot
Newly constructed warehouses and restaurant
35

JNT Inc

Uploaded by

Copyright:

Available Formats

JNT Inc

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JNT Inc

Uploaded by

Copyright:

Available Formats

JNT INC

Construction Chemical Company

High range Water Reducer Type A

High range Water Reducer Type B

Slump Type Water Reducer

Slump Retention Type A

Slump Retention Type B

Air entraining agent for Local concrete Market

For grinding cement clinker in cement mills.

Shrinkage control Admixture

Concrete Mould Release Agent

Concrete surface hardner

Cement Grinding Aid

Grout for Semi-rigid Asphalt-Cement

WF-NT is a powdered accelerator for shotcrete.

Additives for Shotcrete

Very-early Strength Cement

QuickTar is a accelerator that is used for earth anchor works.

ECG is an eco-friendly soilgrout for soil grouting works. It is consist of 3 components.

* 230Kg Drum (80EA)

*1.1 IBC Tank (18EA)

*21MT Flexi Tank (1EA)

(High Range Water Reducing Agent)

Unit weight of material(kg/m3)

Slump / Flow (mm)

Compressive Strength (Mpa)

SHELF LIFE & PRECAUTIONS

(High Range Water Reducing Agent)

Unit weight of material(kg/m3)

Slump / Flow (mm)

Compressive Strength (Mpa)

SHELF LIFE & PRECAUTIONS

(Slump type Water Reducer)

Excellent retention performance and powerful

Unit weight of material(kg/m3)

Slump / Flow (mm)

Compressive Strength (Mpa)

SHELF LIFE & PRECAUTIONS

New generation Polycarboxylic ether concentration

Slump / Flow (mm)

SHELF LIFE & PRECAUTIONS

New generation Polycarboxylic ether concentration

Slump / Flow (mm)

SHELF LIFE & PRECAUTIONS

(High early strength type superplasticizer)

SHELF LIFE & PRECAUTIONS

Cement Grinding Aid

SPECIAL PRODUCT RANGE

High Efficiency Grinding Aid and Pack Set Inhibitor

Point of CQA additions (Decrease of energy consumption)

Blaine Value ; cm2/g

Final grinding(3350150 cm2/g)

Physical property of cement (Mortat Test - KS L ISO 679)

Comp. Strength (MPa)

CQA-Series Strength of grinded cement

Solid content (%)

Specific gravity (g/ml)

SHELF LIFE & PRECAUTIONS

Fig.1. Forming of water drops on the surface after using