OrionNPMAdministratorGuide PDF

Copyright 1995-2014 SolarWinds Worldwide, LLC.
All rights reserved

worldwide. No part of this document may be reproduced by any means nor
modified, decompiled, disassembled, published or distributed, in whole or in part,
or translated to any electronic medium or other means without the written consent
of SolarWinds. All right, title, and interest in and to the software and
documentation are and shall remain the exclusive property of SolarWinds and its
respective licensors.
SOLARWINDS DISCLAIMS ALL WARRANTIES, CONDITIONS OR OTHER
TERMS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, ON
SOFTWARE AND DOCUMENTATION FURNISHED HEREUNDER
INCLUDING WITHOUT LIMITATION THE WARRANTIES OF DESIGN,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND
NONINFRINGEMENT. IN NO EVENT SHALL SOLARWINDS, ITS SUPPLIERS,
NOR ITS LICENSORS BE LIABLE FOR ANY DAMAGES, WHETHER ARISING
IN TORT, CONTRACT OR ANY OTHER LEGAL THEORY EVEN IF
SOLARWINDS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
The SolarWinds, the SolarWinds & Design, ipMonitor, LANsurveyor, Orion, and
other SolarWinds marks, identified on the SolarWinds website, as updated from
SolarWinds from time to time and incorporated herein, are registered with the U.S.
Patent and Trademark Office and may be registered or pending registration in
other countries. All other SolarWinds trademarks may be common law marks or
registered or pending registration in the United States or in other countries. All
other trademarks or registered trademarks contained and/or mentioned herein are
used for identification purposes only and may be trademarks or registered
trademarks of their respective companies. Microsoft, Windows, and SQL
Server are registered trademarks of Microsoft Corporation in the United States
and/or other countries.
Version 10.7, revised 03.04.2014
SolarWinds Orion
Network Performance Monitor Administrator
Guide
About SolarWinds
SolarWinds, Inc develops and markets an array of network management,
monitoring, and discovery tools to meet the diverse requirements of todays
network management and consulting professionals. SolarWinds products
continue to set benchmarks for quality and performance and have positioned the
company as the leader in network management and discovery technology. The
SolarWinds customer base includes over 45 percent of the Fortune 500 and
customers from over 90 countries. Our global business partner distributor network
exceeds 100 distributors and resellers.
Contacting SolarWinds
You can contact SolarWinds in a number of ways, including the following:
Team
Sales
Contact Information
sales@solarwinds.com
www.solarwinds.com
1.866.530.8100
+353.21.5002900
Technical Support www.solarwinds.com/support/
User Forums
www.thwack.com
SolarWinds Orion Network Performance Monitor

Documentation Library
The following documents are included in the SolarWinds Orion Network
Performance Monitor documentation library:
Document
Purpose
Administrator
Provides detailed setup, configuration, and conceptual information.
Guide
Orion
Provides detailed setup, configuration, and conceptual information
Common
relevant to all products in the Orion family. Material from the
Components SolarWinds Orion Common Components Administrator Guide that
Administrator is relevant to SolarWinds NPM has been included in this
Guide
SolarWinds Orion NPM Administrator Guide.
Evaluation Provides an introduction to Orion Network Performance Monitor
Guide
features and instructions for installation and initial configuration.
Provides help for every window in the Orion Network Performance
Page Help
Monitor user interface
Release
Provides late-breaking information, known issues, and updates.
Notes
The latest Release Notes can be found at www.solarwinds.com.
Conventions
The documentation uses consistent conventions to help you identify items
throughout the printed and online library.
Convention
Bold
Italics
Fixed font
Straight brackets, as in
[value]
Curly braces, as in
{value}
Logical OR, as in
value1|value2
Specifying
Window items, including buttons and fields.
Book and CD titles, variable names, new terms
File and directory names, commands and code
examples, text typed by you
Optional command parameters
Required command parameters
Exclusive command parameters where only one of the
options can be specified
Contents
Contents
SolarWinds Orion
Network Performance Monitor Administrator Guide
About SolarWinds
Contacting SolarWinds
SolarWinds Orion Network Performance Monitor Documentation Library
Conventions
Contents
Chapter 1: Introduction
25
Why Install SolarWinds NPM
25
Benefits of Orion Network Performance Monitor
26
Key Features of SolarWinds NPM
26
Networking Concepts and Terminology
31
Simple Network Management Protocol (SNMP)
31
Internet Control Message Protocol (ICMP)
32
SNMP Credentials
32
Management Information Base (MIB)
33
Windows Management Instrumentation (WMI)
34
How Orion Network Performance Monitor Works
34
Chapter 2: Installing SolarWinds Orion Network Performance Monitor

Licensing Orion Network Performance Monitor
37
37
NPM Licensing Levels
37
Licensing NPM with Other SolarWinds Products
38
Orion NPM Requirements
38
Orion Requirements
38
Orion Server Software Requirements
39
Orion Server Hardware Requirements
41
Requirements for the Orion Database Server (SQL Server)
41
Requirements for Virtual Machines and Servers
43
Additional Required Components
44
SNMP Requirements for Monitored Devices
44
Enabling Microsoft Internet Information Services (IIS)
44
Enabling IIS on Windows Server 2003
45
45
46
Enabling and Requiring Secure Channels with SSL
47
Enabling SSL Connections on Windows Server 2003
47
48
49
Configuring the Orion Web Console for SSL
49
Configuring the Web Console to Require SSL
50
Antivirus Directory Exclusions
50
Windows Server 2003 and Windows XP:
50
Windows Server 2007, Windows Vista, and Windows 2008
50
Maintaining Licenses with License Manager
51
Installing License Manager
51
Using License Manager
51
Installing Orion Network Performance Monitor
52
Completing an Orion NPM Installation
52
Completing the Orion Configuration Wizard
54
Upgrading Orion Network Performance Monitor
57
Upgrading an Evaluation License
59
Chapter 3: Discovering and Adding Network Devices

Discovery Central
62
62
Network Discovery
63
Network Discovery Using the Network Sonar Wizard
63
Contents
Using the Network Sonar Results Wizard
69
Importing a List of Nodes Using a Seed File
70
Managing Scheduled Discovery Results
72
Using the Discovery Ignore List
73
Downloading the SolarWinds MIB Database
74
Chapter 4: Managing Orion NPM in the Web Console
76
Logging in to the Orion Web Console
76
Orion Network Performance Monitor Thresholds
76
Network Performance Monitor Threshold Types
77
Setting Network Performance Monitor Thresholds
77
Custom NPM Interface Charts
78
Discards and Errors Charts
78
Percent Utilization Charts
78
Traffic Charts
78
Other Charts
79
Chapter 5: Virtualization
80
VMware Monitoring
80
Virtual Machine Auto-Summary
80
Virtualization Alerting and Reporting
80
Requirements for Monitoring ESXi and ESX Servers
80
Enabling SNMP on VMware ESXi and ESX Servers
82
Enabling SNMP on VMware ESXi
82
Enabling SNMP on ESX Server version 3.5
83
Enabling SNMP on ESX Server Version 4.0
84
85
Creating ESX Server Credentials for NPM
86
Managing VMware Credentials in the Web Console
87
Adding VMware Servers for Monitoring
87
Polling for VMware nodes Using the Network Sonar Wizard
87
Adding VMs from the VMware Assets Resource
87
Virtualization Summary
88
Viewing ESX Host Details
88
Changing Polling Orders for ESX Servers
89
Chapter 6: Monitoring EnergyWise Devices
90
What is EnergyWise?
90
EnergyWise Terminology
90
Monitoring EnergyWise Devices with NPM
93
EnergyWise Summary View and Resources
93
Additional EnergyWise Resources
94
Adding the EnergyWise Summary View
96
Managing EnergyWise Interface Entity Power Levels

Chapter 7: Monitoring Wireless Networks
97
99
Getting Started
99
Migrating Data from the Wireless Networks Module
99
Viewing Wireless Data
100
Removing a Wireless Device
100
Chapter 8: Creating and Managing Alerts
101
Advanced Alerts Predefined by Default
101
Configuring Basic Alerts
102
Creating a New Basic Alert
104
Editing the Name of an Existing Basic Alert
104
Selecting the Monitored Property of a Basic Alert
104
Selecting the Network Objects Monitored by a Basic Alert
105
Setting the Alert Trigger of a Basic Alert
105
Setting the Time of Day for a Basic Alert
106
Setting the Alert Suppression for a Basic Alert
106
Selecting the Actions of a Basic Alert
107
Testing a Basic Alert
108
Contents
Configuring Basic Alert Copies
109
Changing the Name of a Copied Alert
109
Changing the Monitored Property of a Copied Alert
110
Changing Network Objects Monitored by a Copied Alert
110
Changing the Alert Trigger of a Copied Alert
111
Changing the Time of Day of a Copied Alert
111
Changing the Alert Suppression of a Copied Alert
112
Changing the Actions of a Copied Alert
113
Deleting a Basic Alert
113
Deactivating a Basic Alert
113
Adding Basic Alert Actions
114
Available Basic Alert Actions
114
Send an E-mail / Page
115
Playing a Sound
116
Logging Alerts to a File
117
Logging an Alert to the Windows Event Log
117
Sending a Syslog Message
118
Executing an External Program
119
Executing a Visual Basic Script
119
E-mailing a Web Page
120
Changing a Custom Property
121
Using Text to Speech Output
122
Sending a Windows Net Message
123
Dialing a Paging or SMS Service
123
Sending an SNMP Trap
123
Using GET or POST URL Functions
124
Copying Basic Alerts to an Additional Polling Engine
125
Viewing Alerts in the Orion Web Console
126
Chapter 9: Creating Network Maps
127
Chapter 10: Monitoring MIBs with Universal Device Pollers
129
130
Configuring Universal Device Poller Thresholds
131
Creating Universal Device Pollers
131
Assigning Pollers to Nodes or Interfaces
135
Disabling Assigned Pollers
136
Duplicating an Existing Poller
137
Importing MIB Pollers
137
Exporting Universal Device Pollers
139
Setting Custom Poller Thresholds
139
Transforming Poller Results
140
Available Poller Transformations
140
Creating a Poller Transformation
141
Viewing Universal Device Poller Statistics
144
Creating Alerts for Universal Device Pollers
145
Mapping Universal Device Pollers with Network Atlas
145
Chapter 11: Using Additional Polling Engines
147
Additional Polling Engine Guidelines
147
Additional Polling Engine System Requirements
148
Upgrading an Additional Polling Engine
148
Configuring an Additional Polling Engine
149
Changing Polling Engine Node Assignments
150
Chapter 12: Managing the Web ConsoleCore
151
Logging in for the First Time as an Administrator
151
Windows Authentication with Active Directory
151
Using the Web Console Notification Bar
152
Navigating the Orion Web Console
153
Using Web Console Tabs
153
Using and Disabling Web Console Breadcrumbs
154
10
Contents
Customizing Web Console Breadcrumbs

Administrative Functions of the Orion Web Console
154
155
Changing an Account Password
155
Orion Website Administration
156
Node & Group Management
156
156
Accounts
157
Customize
157
Manage Alerts
158
Product Updates
158
Views
158
Settings
158
Details
159
Viewing Secure Data on the Web
160
Handling Counter Rollovers
160
Orion Thresholds
161
Orion General Threshold Types
161
Setting Orion General Thresholds
163
Customizing Views
163
Creating New Views
163
Editing Views
164
Configuring View Limitations
165
Copying Views
166
Deleting Views
166
Views by Device Type
166
Resource Configuration Examples
167
Selecting a Network Map
167
Displaying a List of Objects on a Network Map
168
Displaying a Custom List of Maps
168
11
Displaying an Event Summary - Custom Period of Time
169
Specifying User-Defined Links
169
Specifying Custom HTML or Text
170
Specifying an Orion Report
171
Displaying a Custom List of Reports
172
Filtering Nodes
172
Grouping Nodes
173
Adding a Service Level Agreement Line to Charts (Orion NPM)
174
Using and Configuring Subviews
175
Using a Subview
175
Adding a New Subview
176
Editing an Existing Subview
178
Copying an Existing Subview
179
Deleting an Existing Subview
180
Using the Orion Web Console Message Center
180
Exporting Views to PDF
181
Creating a Custom Summary View
181
Creating and Editing External Website Views
182
Customizing the Orion Web Console
183
Customizing Web Console Menu Bars
183
Changing the Web Console Color Scheme
185
Changing the Web Console Site Logo
185
Configuring the Available Product Updates View
185
Updating your Orion Installation
186
Orion Web Console and Chart Settings
186
Web Console Settings
187
Chart Settings
188
Using Node Filters
189
Custom Charts in the Orion Web Console
190
12
Contents
Customizing Charts in the Orion Web Console
190
Custom Chart Resource Title Bar Options
190
Edit Chart Title View
190
Custom Node Charts
191
Availability
192
CPU Load
192
Memory Usage
192
Packet Loss and Response Time
192
Custom Volume Charts
192
Multiple Object Charts
193
Custom Chart View
193
Printing Options
193
Chart Titles
194
Time Period
194
Sample Interval
194
Chart Size
194
Font Size
194
Data Export Options
194
Custom Object Resources in the Orion Web Console
195
Editing a Custom Object Resource
195
Selecting Custom Objects and Resources
195
Available Custom Resources
196
Integrating SolarWinds Engineers Toolset
196
Installing the Toolset Integration
196
Configuring a Toolset Integration
197
Adding Programs to a Toolset Integration Menu
197
Using Integrated Remote Desktop
198
Accessing Nodes Using HTTP, SSH, and Telnet
199
Chapter 13: Managing Devices in the Web ConsoleCore
13
201
Adding Devices for Monitoring in the Web Console
201
Changing the Polling Method for a Node
204
Customizing the Manage Nodes View
205
Customizing the Manage Nodes View Node Tree
205
Customizing the Manage Nodes View Node List
206
Deleting Devices from Monitoring
206
Viewing Node Data in Tooltips
207
Editing Object Properties
208
Promoting a Node from ICMP to SNMP Monitoring
211
Promoting a Node from ICMP to WMI Monitoring
213
Viewing Node Resources
214
Setting Device Management States
214
Changing Polling Engine Assignments
215
Unscheduled Device Polling and Rediscovery
215
Monitoring Windows Server Memory
216
Scheduling a Node Maintenance Mode Time Period
216
Chapter 14: Managing Groups and DependenciesCore
218
Managing Groups
218
Creating Groups
218
Editing Existing Groups
220
Managing Group Members
220
Deleting Groups
220
Managing the Display of Group Status
221
Managing Dependencies
222
Creating a New Dependency
223
Editing an Existing Dependency
224
Deleting an Existing Dependency
225
Viewing Alerts on Child Objects
226
Chapter 15: Managing Web AccountsCore
14
227
Contents
Creating New Accounts
227
Editing User Accounts
228
User Account Access Settings
229
Setting Account Limitations
230
Defining Pattern Limitations
232
Setting Default Account Menu Bars and Views
232
Configuring an Account Report Folder
234
Configuring Audible Web Alerts
234
Chapter 16: Managing Orion Polling EnginesCore
237
Viewing Polling Engine Status in the Web Console
237
Configuring Polling Engine Settings
237
Orion Polling Settings
237
Polling Intervals
238
Polling Statistics Intervals
238
Dynamic IP Address and Hostname Resolution
239
Database Settings
239
Network
242
Calculations & Thresholds
243
Calculating Node Availability
244
Node Status:
244
Percent Packet Loss:
244
Calculating a Baseline
245
Setting the Node Warning Level
245
Managing Packet Loss Reporting
246
Chapter 17: Monitoring Network EventsCore
248
Viewing Event Details in the Web Console
248
Acknowledging Events in the Web Console
249
Chapter 18: Using Orion Advanced AlertsCore

Creating and Configuring Advanced Alerts
15
250
250
Creating a New Advanced Alert
251
Naming, Describing, and Enabling an Advanced Alert
252
Setting a Trigger Condition for an Advanced Alert
253
Setting a Reset Condition for an Advanced Alert
256
Setting a Suppression for an Advanced Alert
257
Setting the Monitoring Period for an Advanced Alert
259
Setting a Trigger Action for an Advanced Alert
259
Setting a Reset Action for an Advanced Alert
260
Alert Escalation
260
Sharing Advanced Alerts with Other SolarWinds Products
261
Understanding Condition Groups
262
All Condition Group
262
Any Condition Group
262
None Condition Group
262
Not All Condition Group
263
Using the Advanced Alert Manager
263
Current Events Window
263
Active Alerts Window
264
Alert Viewer Settings
265
Adding Advanced Alert Actions
266
Available Advanced Alert Actions
266
Sending an E-mail / Page
267
Playing a Sound
268
Logging an Advanced Alert to a File
269
Logging an Advanced Alert to the Windows Event Log
270
Logging an Advanced Alert to the NetPerfMon Event Log
271
272
273
274
16
Contents
Emailing a Web Page
274
276
277
277
278
Dial Paging or SMS Service
279
Testing Alert Actions
279
280
Acknowledging Advanced Alerts in the Web Console
281
Managing Advanced Alerts in the Web Console
281
Editing Advanced Alerts
282
Enabling and Disabling Advanced Alerts
282
Deleting Advanced Alerts
283
Escalated Advanced Alerts
283
Escalated Alert Example
283
Creating a Series of Escalated Alerts
284
Viewing Alerts from Mobile Devices

Chapter 19: Creating and Viewing ReportsCore
Predefined Orion Reports
287
288
288
Availability
288
Current Node Status
289
Current Volume Status
290
Daily Node Availability
290
Events
290
Historical CPU and Memory Reports
291
Historical Response Time Reports
291
Historical VMware ESX Server Reports
292
Groups: Current Groups and Groups Members Status
292
Groups: Daily Group Availability
293
17
Groups: Group Availability (with members)
293
Groups: Historical Groups Status
293
Historical Volume Usage Reports
294
Inventory
294
Viewing Reports
294
Viewing Reports in the Orion Web Console
295
Viewing Reports in the Report Writer
295
Creating Reports in the Web Console
295
Modifying an Existing Web-Based Report
296
Creating a New Web-Based Report
297
Adding Content to a Web-Based Report Column
299
Adding a Custom Chart to a Web-Based Report Column
300
Adding a Custom Table to a Web-Based Report Column
302
Using Report Writer
304
Preview Mode
304
Design Mode
305
Creating and Modifying Reports in Report Writer
305
General Options Tab
305
Select Fields Options Tab
306
Filter Results Options Tab
307
Top XX Records Options Tab
307
Time Frame Options Tab
308
Summarization Options Tab
308
Report Grouping Options Tab
308
Field Formatting Options Tab
309
Customizing the Report Header and Footer Image
309
Customizing Web-Based Report Headers and Footers
310
Customizing Report Headers and Footers with Report Writer
310
Using Orion Report Scheduler
310
18
Contents
Creating a Scheduled Report Job
310
Using Orion Report Scheduler with HTTPS
311
Troubleshooting the Orion Report Scheduler
312
Printing Web Pages from Report Scheduler
312
Orion Report Scheduler and Internet Explorer Enhanced Security
313
Reports and Account Limitations
313
Example Device Availability Report Report Writer
314
Chapter 20: Monitoring Syslog MessagesCore
321
Configuring the Orion Syslog Port
322
Syslog Messages in the Web Console
322
Syslog Resources
322
Viewing Syslog Messages in the Web Console
323
Acknowledging Syslog Messages in the Web Console
324
Using the Syslog Viewer
325
Viewing and Acknowledging Current Messages
325
Searching for Syslog Messages
325
Syslog Server Settings
326
Configuring Syslog Viewer Filters and Alerts
327
Available Syslog Alert Actions
329
Forwarding Syslog Messages
330
Syslog Alert Variables
331
Syslog Date/Time Variables
331
Other Syslog Variables
332
Syslog Message Priorities
333
Syslog Facilities
333
Syslog Severities
334
Chapter 21: Monitoring SNMP TrapsCore
336
The SNMP Trap Protocol
336
Viewing SNMP Traps in the Web Console
337
19
Using the Trap Viewer
337
Viewing Current Traps
337
Searching for Traps
338
Trap Viewer Settings
338
Configuring Trap Viewer Filters and Alerts
339
Available Trap Alert Actions
341
Trap Alert Variables
343
Trap Date/Time Variables
343
Other Trap Variables
344
Chapter 22: Creating Custom PropertiesCore
346
Managing Custom Properties
346
Creating a Custom Property
347
Assigning Values to a Custom Property
349
Importing Custom Property Data
349
Removing Custom Properties
350
Exporting a Custom Property
351
Custom Properties in Older Orion Core Versions
351
Creating Properties with the Custom Property Editor
351
Custom Property Editor Settings
352
Editing Custom Properties in the Custom Property Editor
353
Using Filters in the Custom Property Editor Edit View
353
Creating Custom Properties Filters
353
Removing Custom Properties Filters
354
Chapter 23: Creating Account LimitationsCore

Using the Account Limitation Builder
356
356
Creating an Account Limitation
356
Deleting an Account Limitation
357
Chapter 24: Managing the Orion DatabaseCore

Using Database Manager
359
359
20
Contents
Adding a Server
360
Viewing Database Details
360
Viewing Table Details
361
Editing Database Fields
361
Using SQL Server Management Studio
362
Database Maintenance
364
Chapter 25: Common NPM Tasks
365
Creating an Alert to Discover Network Device Failures
365
365
Creating an Alert Using a Custom Property
368
Configuring Alert Actions
369
Create a Local Alert Log
369
Send a Syslog Message
371
Send an SNMP Trap
371
Testing Alerts
372
Scheduling and Emailing Business Hours Reports
374
Creating a Business Hours Report
374
Scheduling and Emailing a Report
375
Creating Geographic or Departmental Views

Creating a Custom Group
376
376
Chapter 26: Software License Key
378
Chapter 27: Configuring Automatic Login
380
Using Windows Pass-through Security
380
Passing Login Information Using URL Parameters
382
Using the DirectLink Account
383
Chapter 28: Status Icons and Identifiers
384
Status Indicators
384
Status Rollup Mode
385
Chapter 29: NPM Variables and Examples
21
388
Variable Modifiers
388
Advanced Alert Engine Variables
389
General
389
Date/Time
389
Group Variables
390
SQL Query
392
Status Variables
392
Node Variables
393
Volume Variables
397
Example Messages Using Variables
398
Basic Alert Engine Variables
399
Alert-specific
399
Buffer Errors
400
Date/Time
400
Interfaces
401
Interface Errors
402
Interface Polling
403
Interface Status
403
Interface Traffic
403
Nodes
404
Node Polling
405
Node Statistics
405
Node Status
406
Object Types
406
Volumes
407
Volume Polling
407
Volume Statistics
407
Volume Status
408
408
22
Contents
Basic Alert Engine Suppression Examples
408
Dependent Node Alert Suppression Example
410
Failure of Load Balancing Alert
411
Advanced Alert Engine Variables NPM Only
412
Interface Poller Variables
413
Interface Variables
415
Universal Device Poller
418
Wireless Node Variables
419
Chapter 30: 95th Percentile Calculations
420
Chapter 31: Regular Expression Pattern Matching
422
Characters
422
Character Classes or Character Sets [abc]
422
Anchors
423
Quantifiers
424
Dot
426
Word Boundaries
426
Alternation
426
Regular Expression Pattern Matching Examples
426
Chapter 32: Troubleshooting
429
Back Up Your Data
429
Verify Program Operation
429
Stop and Restart
430
Run the Configuration Wizard
430
Adjusting Interface Transfer Rates
430
Using Full Variable Names
431
Working with Temporary Directories
431
Moving the SQL Server Temporary Directory
431
Redefining Windows System Temporary Directories
431
Slow Performance on Windows Server 2008
23
432
Chapter 33: Other Orion Products
434
Monitoring Network Application Data (SAM)
434
Managing Network Configurations (NCM)
435
Managing IP Addresses (IPAM)
435
Managing IP Service Level Agreements (SolarWinds VoIP and Network

Quality Manager)
436
Monitoring NetFlow Traffic Analysis Data (Orion NTA)
437
Monitoring Network User Connections (User Device Tracker)
437
Orion Scalability Engines
438
Using an Orion Additional Web Server
438
Orion Failover and Disaster Recovery
442
24
SolarWinds Network Performance Monitor (NPM) delivers comprehensive fault
and network performance management that scales with rapid network growth and
expands with your network monitoring needs, allowing you to collect and view
availability and realtime and historical statistics directly from your web browser.
While monitoring, collecting, and analyzing data from routers, switches, firewalls,
servers, and any other SNMP-, ICMP-, or WMI-enabled devices, SolarWinds
NPM successfully offers you a simple-to-use, scalable network monitoring
solution for IT professionals juggling any size network. Users find that it does not
take a team of consultants and months of unpleasant surprises to get SolarWinds
NPM up and running because the NPM experience is far more intuitive than
conventional, complex enterprise network management systems. Because it can
take less than an hour to deploy and no consultants are needed, NPM provides
quick and cost-effective visibility into the health of network devices, servers, and
applications on your network, ensuring that you have the realtime information you
need to keep your systems running at peak performance.
Why Install SolarWinds NPM

Out of the box, SolarWinds NPM monitors the following critical performance
metrics for physical and virtual devices on your network:
l
l
l
l
l
l
l
l
Network availability
Bandwidth capacity utilization
Buffer usage and errors
CPU and memory utilization
Interface errors and discards
Network latency
Node, interface, and volume status
Volume usage
These monitoring capabilities, along with a fully customizable web-based

interface, alerting, reporting engines, and flexible expansion capabilities, make
SolarWinds Orion Network Performance Monitor the easiest choice you will make
involving your network performance monitoring needs.
25
Benefits of Orion Network Performance Monitor

Consider the following benefits of Orion Network Performance Monitor.
Out-of-the-box Productivity
Automatic discovery and wizard-driven configuration offer an immediate
return on your investment. Within minutes of installing SolarWinds NPM,
you can be monitoring your critical network devices.
Easy to Understand and Use
SolarWinds NPM is designed for daily use by staff that also have other
responsibilities. The SolarWinds interface provides what you need where
you expect to find it and offers advanced capabilities with minimal
configuration overhead.
Affordable Value
While SolarWinds NPM provides functionality that is comparable, if not
superior, to most other solutions, the cost and maintenance of your
SolarWinds installation is less than the initial cost of most other solutions.
Scalability
By adding individual polling engines, you can scale your SolarWinds NPM
installation to any environment size. By sharing the same database, you can
also share a unified user interface, making the addition of polling engines
transparent to your staff.
thwack.com Online Community
thwack.com is a community site that SolarWinds developed to provide
SolarWinds users and the broader networking community with useful
information, tools and valuable resources related to SolarWinds network
management solutions. Resources that allow you both to see recent posts
and to search all posts are available from the Orion Web Console, providing
direct access to the thwack.com community.

Considering the previously listed benefits of SolarWinds NPM and the following
features, NPM is a simple choice to make.
Customizable and Flexible Orion Web Console
Detailed graphs, tables, and lists are displayed in a fully customizable
web-based interface allowing you to remotely view network fault,
26

availability, and performance information. Using the award-winning, intuitive
SolarWinds web interface, you can conduct administrative tasks, such as
adding new devices, both individually and in groups, create custom
resources and views, establish unique user accounts and views for
departments, geographic areas, or any other user-defined criteria, and
customize web console displays from anywhere on your network. Drag-anddrop highly customizable resources on-the-fly to get an accurately updated
view of your network. Enable Network Operations Center (NOC) view to
share the web console view with your entire IT management team. You and
your team save valuable time by administering NPM tasks remotely without
having to RDP directly into your SolarWinds server.
Network Atlas with ConnectNow
Network Atlas, the Orion network mapping application, gives you the ability
to create multi-layered, fully customizable, web-based maps of your network
to visually track the performance of any device in any location across your
network in real time. The ConnectNow feature uses ARP table data to draw
virtual and physical links between nodes discovered on your network.
Network Atlas maps may include any monitored network object or
configured Universal Device Poller. Link utilization and speed are available
as visible connection options.
Routing Information
Discover and view routing table information, including VRF data, for
monitored nodes, identify flapping routes, and create alerts for detected
routing table changes. RIP v2, OSPF v2, OSPF v3/EIGRP, and BGP are
currently supported protocols.
Detailed Historical Reports
Easily configure reports of data from the Orion database over custom time
periods. Data is presented in an easily reviewed format in the web console.
With over 40 built-in reports available, you can project future trends and
capacity needs, and immediately access availability, performance, and
utilization statistics. Using the Web-based Report Scheduler, you can email,
print or save reports on a regularly scheduled basis, directly from the web
console.
Multicast Routing Status and Performance Monitoring
Multicast-specific resources provide group status and realtime monitoring of
multicast traffic for Hewlett-Packard (HP) and Cisco devices. Web console
27
resources allow you to see multiple routing table levels. You can also
configure alerts to trigger on route changes and traffic thresholds.
Web Console User Auditing
Audit events for web console users are stored in the SolarWinds database,
allowing you to keep track of which users are making changes to your
network monitoring profile.
Hardware Health Monitoring
Get immediate, visual insight into the operational state of your network with
hardware health charts and alerts that show you the number of devices on
your network that are functioning in Warning and Critical states.
F5 BIG-IP Monitoring
NPM now specifically supports performance monitoring for F5 devices and
interfaces. NPM monitoring for F5 devices and interfaces includes device
status and availability, CPU and memory performance statistics, interface
performance details, and related graphs and charts.
Interactive Charting for Node and Interface Statistics
SolarWinds NPM charting not only provides historical performance data; the
new interactive charting package enables you to zoom in on your charted
data, using either fixed time periods or custom date ranges
Training View
The Training view on the Home tab of the SolarWinds Web Console
provides a variety of helpful documents and videos that are regularly
updated to help you optimize your SolarWinds monitoring environment.
Automatic and Scheduled Device Discovery
Wizard-driven device discovery further simplifies the addition of devices and
interfaces to SolarWinds NPM. Answer a few general questions about your
devices, and the discovery application takes over, populating the
SolarWinds database and immediately beginning network analysis. You
can also create network discovery schedules to independently and
automatically run Network Sonar Discovery jobs whenever you need them.
Network Discovery also performs IP address de-duplication automatically
when any single, discovered, network device is associated with multiple IP
addresses.
Intuitive SolarWinds NPM Administration
28

Using the award-winning, intuitive web interface, you can now conduct
administrative tasks, such as adding new devices, both individually and in
groups, establish unique user accounts, and customize web console
displays from anywhere on your network. These administration features
allow you to save time by administering NPM tasks remotely without having
to RDP directly into your SolarWinds server.
Open Integration
Enterprise-tested standards, including a Microsoft SQL Server database
and industry-standard MIBs and protocols, are the backbone of the
SolarWinds NPM network monitoring solution.
Integrated Wireless Poller
An integrated wireless device poller enables you to leverage proven NPM
alerts, reports, and web console resources as you monitor and manage
wireless thin and autonomous access points in the same views in which
you are already monitoring your wired network devices.
Cisco EnergyWise Monitoring
Cisco EnergyWise technology allows you to responsibly manage energy
usage across the enterprise. With NPM, you can view EnergyWise device
management data to measure, report, and reduce the energy consumption
of any devices connected to EnergyWise-enabled switches.
Unpluggable Port Mode
NPM enables you to designate selected ports as unpluggable, so you dont
receive unnecessary alerts when users undock or shutdown connected
devices. This feature is particularly useful for distinguishing low priority
ports connected to laptops and PCs from more critically important
infrastructure ports.
Universal Device Pollers
The Universal Device Poller allows you to easily add any SNMP-enabled
device into the local monitoring database and collect any statistics or
information that are referenced in device MIB tables.Using poller transforms
available in the Universal Device Poller Wizard, you can also manipulate
data collected from multiple Universal Device Pollers to create your own
custom statistics and then choose your own customized data display. You
may also use Network Atlas to map your Universal Device Pollers.
VMware Infrastructure Monitoring
29
SolarWinds NPM enables you to monitor your VMware servers,
datacenters, and clusters, including VMware ESX and ESXi, Virtual Center,
and any virtual machines (VMs) hosted by ESX servers on your network.
Available resources include lists of VMs on selected ESXi and ESX
servers, performance details for ESXi and ESX servers and hosted VMs,
and relevant charts and reports.
Data Center Monitoring
NPM offers predefined reports and web console views and resources
specifically tailored to provide performance data about Cisco Unified
Computing Systems (UCS) and Fibre Channel devices manufactured by
Cisco MDS, Brocade, and McData.
Incident Alerting
You can configure custom alerts to respond to hundreds of possible network
scenarios, including multiple condition checks. SolarWinds NPM alerts help
you recognize issues before your network users experience productivity
hits. Alert delivery methods and responses include email, paging, SNMP
traps, text-to-speech, Syslog messaging, and external application
execution.
Integrated Trap and Syslog Servers
SolarWinds NPM allows you to save time when investigating network
issues by giving you the ability to use traps and Syslog messages to access
network information from a single interface instead of requiring that you poll
multiple machines. You can use SolarWinds NPM to easily set up alerts
and then receive, process, forward, and send syslog and trap messages.
Groups and Dependencies
The ability to define device groups and dependencies allows you to more
effectively manage your network. Groups give you the ability to logically
organize monitored objects, regardless of device type or location, and
dependencies allow you to more faithfully represent what can actually be
known about your network, eliminating false positive alert triggers and
providing more accurate insight into the status of monitored network objects.
Coordinated Network, Application, and Configuration Management
SolarWinds provides a complete network management and monitoring
solution when SolarWinds NPM is installed with SolarWinds Server &
Application Monitor (SAM, formerly Application Performance Monitor, APM),
30

SolarWinds IP Address Manager (IPAM), and the SolarWinds Network
Configuration Manager (NCM) integration to monitor network applications,
manage IP address and subnet allocations, and manage network device
configuration, respectively.
Extensible SolarWinds NPM Modules
With additional SolarWinds modules NetFlow Traffic Analyzer (NTA) and IP
SLA Manager (formerly Orion VoIP Monitor) SolarWinds NPM can analyze
network traffic and monitor VoIP and WAN traffic using Cisco IP SLA,
respectively. NPM modules save time by leveraging the existing
SolarWinds NPM deployment to add feature functionality without requiring
additional standalone software.
Product Update Notifications
Receive regular, automatic notification of updates to your installed Orion
monitoring and management applications in the Orion Web Console as
soon as they are available from SolarWinds. Product updates can include
upgrade opportunities, service packs, and hotfixes.
Orion Product Team Blog
Stay in touch with the people who bring you the products in the Orion family
by following the Orion Product Team Blog on thwack, the SolarWinds online
user community. Read posts from Orion product managers and developers
to learn how to extend and optimize your Orion installation to best meet the
needs of your network.

The following sections define the networking concepts and terminology that are
used within NPM.
l
l
l
l
l

SNMP Credentials

For most network monitoring and management tasks, NPM uses the Simple
Network Management Protocol (SNMP). SNMP-enabled network devices,
including routers, switches, and PCs, host SNMP agents that maintain a virtual
31
database of system status and performance information that is tied to specific
Object Identifiers (OIDs). This virtual database is referred to as a Management
Information Base (MIB), and NPM uses MIB OIDs as references to retrieve
specific data about a selected, SNMP-enabled, managed device. Access to MIB
data may be secured either with SNMP Community Strings, as provided with
SNMPv1 and SNMPv2c, or with optional SNMP credentials, as provided with
SNMPv3.
Notes:
l
To properly monitor devices on your network, you must enable SNMP on

all devices that are capable of SNMP communications. The steps to
enable SNMP differ by device, so you may need to consult the documentation provided by your device vendor.
If SNMPv2c is enabled on a device you want NPM to monitor, by default,
NPM will attempt to use SNMPv2c to poll the device for performance
information. If you only want NPM to poll using SNMPv1, you must disable
SNMPv2c on the device to be polled.
For more information about MIBs, see Management Information Base (MIB) on
page33. For more information about SNMP credentials, see SNMP Credentials
on page1.

NPM uses the Internet Control Message Protocol (ICMP) to poll for status using
echo requests of managed devices. When NPM polls a managed device using
ICMP, if the device is operationally up, it returns an echo reply that NPM uses to
calculate a response time. NPM also records any reported packet drops. This
information is used by NPM to monitor status and measure average response
time and packet loss percentage for managed devices.
Note: NPM only uses ICMP to poll devices for status, average response time, and
packet loss percentage. Other information displayed in the Orion Web Console
may be obtained using SNMP and WMI requests or VMware and UCS APIs.
SNMP Credentials
SNMP credentials secure access to SNMP-enabled managed devices. SNMPv1
and SNMPv2c credentials serve as a type of password that is authenticated by
confirming a match between a cleartext SNMP Community String provided by an
SNMP request and the SNMP Community String stored as a MIB object on an
32

SNMP-enabled, managed device. SNMPv3 provides a more secure interaction
by employing the following fields:
l
The User Name is a required cleartext string that indentifies the SNMP
manager (NPM) or poll request that is attempting to access an
SNMP-enabled device. User Name functions similarly to the SNMP Community String of SNMP v1 and v2c.
The Context is an optional identifying field that can provide an additional
layer of organization and security to the information available in the MIB of
an SNMP-enabled device. Typically, the context is an empty string unless
it is specifically configured on an SNMP-enabled device.
SNMPv3 uses keyed-Hash Message Authentication (HMAC) with either of
two available Authentication Methods: Message Digest 5 (MD5) and
Secure Hash Algorithm 1 (SHA1). With either method, MD5 or SHA1,
HMAC includes the Authentication Key with the SNMPv3 packet and
then generates a digest of an entire SNMPv3 packet that is then sent. MD5
digests are 20 bytes long, and SHA1 digests are 16 bytes long. When the
packet is received, the User Name is used to determine a matching authentication key on the recipients internal credentials table. HMAC uses the
matched authentication key and the digest to recreate the sent packet
using the appropriate method.
Note: It is possible to allow SNMP to create the required authentication key using
the password to key algorithm. For more information, see RFC 2574.
l
SNMPv3 also provides the following optional Privacy/Encryption Methods that are supported by SolarWinds NPM:
o Data Encryption Standard (DES56). DES56 uses a 56 bit key with a 56
bit salt to encrypt the SNMP v3 packet data. All packet headers are sent
in clear-text.
o Advanced Encryption Standards (AES128, AES 192, and AES 256)
using 128-, 192-, or 256-bit keys, respectively, with 128-, 192-, or 256bit salts. All packet headers are sent in clear-text.

A Management Information Base (MIB) is the formal description of a set of objects
that can be managed using SNMP. MIB-I refers to the initial MIB definition, and
MIB-II refers to the current definition. Each MIB object stores a value such as
sysUpTime, bandwidth utilization, or sysContact. During polling, SolarWinds NPM
sends a SNMP GET request to each device to poll the specified MIB objects.
33
Received responses are then recorded in the SolarWinds database for use in
NPM, including within Orion Web Console resources.
Most network devices can support several different types of MIBs. While most
devices support the standard MIB-II MIBs, they may also support any of a number
of additional MIBs that you may want to monitor. Using a fully customizable Orion
Universal Device Poller, you can gather information from virtually any MIB on any
network device to which you have access.

Windows Management Instrumentation (WMI) is a proprietary technology used to
poll performance and management information from Windows-based network
devices, applications, and components. When used as an alternative to SNMP,
WMI can provide much of the same monitoring and management data currently
available with SNMP-based polling with the addition of Windows-specific
communications and security features. For more information about WMI, see the
Microsoft article, About WMI.
Notes:
l
Due to specific characteristics of WMI polling requests, polling a single

WMI-enabled object uses approximately five times the resources required
to poll the same or similar object with SNMP on the same polling frequency.
SolarWinds NPM does not currently use WMI to monitor interfaces.

Through ICMP, SNMP, WMI, and Syslog communication and data collection,
NPM continuously monitors the health and performance of your network, and it
does this without interfering with the critical functions of your network devices.
Unlike many other network monitoring products, NPM helps you maintain the
overall performance of your network in the following ways:
l
l
NPM does not install outside agents on your mission-critical servers

NPM does not employ services that take vital resources from critical applications
NPM does not install any code on monitored network devices. Unmanaged
or outdated code can open security holes in your network.
After installing NPM, you can automate the initial discovery of your network, and
then simply add new devices as you add them to your network. NPM stores
34

gathered information in a SQL database (the SolarWinds database) and provides
a user-friendly, highly customizable web console in which to view current and
historical network status.
The following procedure and diagram provide an outline of how SolarWinds NPM
monitors your network.
1. After Network Sonar Discovery has populated the SolarWinds Database with
the network objects you want to monitor, object information is passed to the
Business Layer.
2. The Business Layer passes node and volume information to the Collector
Polling Controller and provides licensing information to the SolarWinds Information Service (SWIS).
3. The Collector Polling Controller creates the required polling jobs and then
passes them on to the Job Engine v2.
4. The Job Engine v2 performs requested polling jobs, using SNMP, ICMP and
WMI, as configured in Network Sonar Discovery.
5. The Job Engine v2 then passes the results of all requested polling jobs to the
Collector Polling Controller.
6. The Collector Polling Controller places all polling results into the Microsoft
Message Queue (MSMQ).
7. The Collector Data Processor pulls polling results from the MSMQ, and then
performs the following operations:
a. The Collector Data Processor performs any required calculations, and
then inserts these cooked results into the SolarWinds database.
b. The Collector Data Processor checks with the SolarWinds Information
Service (SWIS) for any existing dependencies that are defined for the
polled nodes.
35
c. The Collector Data Processor checks polling results against existing
basic alert definitions to determine if any basic alerts and corresponding actions should be triggered.
36
Chapter 2: Installing SolarWinds

Orion Network Performance Monitor
Orion Network Performance Monitor (Orion NPM) provides a simple, wizarddriven installation process. For an enterprise-class product, licensing, hardware
and software requirements are nominal.
Licensing Orion Network Performance Monitor

Orion NPM can collect data and detailed information from any of your version 3 or
earlier SNMP-enabled devices, including routers, switches, firewalls, and servers.
Orion NPM is licensed in accordance with the largest number of the following
three types of monitored network elements:
Nodes
Nodes include entire devices, for example, routers, switches, virtual and
physical servers, access points, and modems.
Interfaces
Interfaces include switch ports, physical interfaces, virtual interfaces, subinterfaces, VLANs, and any other single point of network traffic.
Volumes
Volumes are equivalent to the logical disks you are monitoring.
NPM Licensing Levels

The following list provides the different types of Orion Network Performance
Monitor licenses that are available:
l
An SL100 license allows you to monitor up to 100 nodes, 100 interfaces,

and 100 volumes (300 elements in total).
37
An SL2000 license allows you to monitor up to 2000 nodes, 2000 interfaces, and 2000 volumes (6000 elements in total).
An SLX license allows you to monitor a virtually unlimited number of elements. For more information about relevant server sizing considerations,
see on page1.
Database size increases with the addition of monitored elements. Depending on

the number of elements and the amount of traffic on your network, monitoring
more than 10,000 elements can require additional polling engines.
Licensing NPM with Other SolarWinds Products

Your NPM license interacts additively with your other SolarWinds licenses. For
example, if you have an NPM SL500 (500 nodes and 500 volumes) installed with
SAM AL50, you can monitor a total of 550 nodes (500 NPM nodes + 50 SAM
nodes), 500 interfaces, 550 volumes (matching the node count), and 50
application monitors.
Orion NPM Requirements

SolarWinds recommends installing Orion NPM on its own server, with the Orion
database hosted separately, on its own SQL Server. Installations of multiple Orion
servers, including NPM, Orion Server & Application Monitor, and Orion Network
Configuration Manager using the same database are not supported. For more
information, see Orion Requirements on page1.
Note: Any and all installed Additional Polling Engines and Additional Web
Servers must use the same version of Orion NPM that is installed on the primary
Orion server.
Orion Requirements
SolarWinds recommends installing Orion and your SQL Server on separate
servers. Installations of multiple NPM servers using the same database are not
supported. The following sections provide specific requirements:
l
l
l
l
l

38

The following table lists minimum software requirements and recommendations.
Software
Requirements
Windows Server 2003 SP2, including R2, 32- or 64-bit, with IIS in
32-bit mode
Windows Server 2008, 2008 SP2, 2008 R2, 2008 R2 SP1
Windows Server 2012 and 2012 R2
Notes:
l
Operating
System
l
IIS and MSMQ must be installed. SolarWinds recommends that

Orion administrators have local administrator privileges to
ensure full functionality of local Orion tools. Accounts limited to
use of the Orion Web Console do not require administrator privileges.
SolarWinds does not support production installations of Orion
products on Windows XP, Windows Vista, Windows 7, or Windows 8 systems.
SolarWinds products are not compatible with installations of
Internet Information Services version 6.0 (IIS6) that make use of
web gardens.
SolarWinds SAM installations on Windows Server 2008
require R2. For more information, see Additional SAM Requirements in the SolarWinds Server & Application Monitor Administrator Guide.
Operating
System
English (UK or US), German, Japanese, or Simplified Chinese
Languages
IPv4 or IPv6 implemented as a dual stack. For more information, see
IP Address RFC 4213 - Basic Transition Mechanisms for IPv6 Hosts and
Routers.
Version
Note: CIDR notation is not currently supported for IPv6 addresses.
25 for SSL/TLS-enabled email alert actions
161, 162, 443 (SNMP). VMware ESX/ESXi Servers are polled on
Application
443.
Ports
1801 (TCP) for MSMQ WCF binding. For more information see:
http://support.microsoft.com/kb/183293
39

17777 (TCP) open for Orion module traffic
17778 (HTTPS) open to access the SolarWinds Information Service
API
17779 (HTTP and HTTPS) for the SolarWinds Toolset Integration
Microsoft IIS, version 6.0 or higher, in 32-bit mode.
DNS specifications require that hostnames be composed of
alphanumeric characters (A-Z, 0-9), the minus sign (-), and periods (.).
Underscore characters (_) are not allowed. For more information, see
RFC 952 - DOD Internet Host Table Specification
Warning: The following Windows accounts, as configured by IIS 6.0
on Windows Server 2003 with their default security settings, are
required:
l
l
Web
Server
IUSR_<hostname>, as a member of theGuestsgroup ONLY.

IWAM_<hostname>, as a member of theIIS_WPG group
ONLY.
Disabling these accounts or changing any default settings of these
accounts may negatively affect the operation of your Orion
installation. SolarWinds strongly recommends against altering these
accounts or their settings.
Notes:
SolarWinds does not support installing NPM on domain controllers.
l SolarWinds neither recommends nor supports the installation of any Orion product on the same server or using the
same database server as a Research in Motion (RIM) Blackberry server.
Version 3.5. SP1 and 4.0
l
.NET
Framework Note: Both versions 3.5 SP1 and 4.0 are required.
Microsoft Internet Explorer version 8 or higher with Active scripting

Web
Console
Browser
Mozilla Firefox 3.0 or higher (Toolset Integration is not supported on

Firefox)
Google Chrome 10.0 or higher
Note: JavaScript must be enabled on all browsers to ensure full web
console functionality.
40

The following table lists minimum hardware requirements and recommendations.
Note: Hardware requirements are listed by Orion NPM license level.
Hardware
CPU
Speed
Hard
Drive
Space
Memory
SL100, SL250, or
SL2000
SLX
SL500
2.0 GHz
2.4 GHz
3.0 GHz
Note: A dual-core processor is required, but a quad-core processor is
recommended. Physical Address Extension (PAE) should not be
enabled.
2.5 GB
5 GB
20 GB
Note: A RAID 1 drive for server operating system, Orion installation,
and tempdb files is recommended. Orion requires at least 1.5GB for
job engine, information service, collector service, MIB database and
other required files. The Orion installer needs 1GB on the drive where
temporary Windows system or user variables are stored. Per Windows
standards, some common files may need to be installed on the same
drive as your server operating system. For more information, see
Working with Temporary Directories on page431.
3 GB
4 GB
8 GB

The following table lists software and hardware requirements for your Orion
database server. Orion NPM license levels are provided as a reference.
Requirements
SL100, SL250, or
SL2000
SLX
SL500
SolarWinds supports Express, Standard, or Enterprise versions
of the following:
l
SQL Server
l
l
l
SQL Server 2005 SP3

Note: SolarWinds recommends that you upgrade to
SQLServer 2005 SP4 or, preferably, SQL Server 2008
SQL Server 2008 without SP, SP1, SP2, or SP3
SQL Server 2008 R2 without SP, SP1, or SP2
SQL Server 2012 without SP or SP1
Notes:
l
The FullWithSQL NPM installer package automatically
41
installs SQL Server 2008 R2 SP1 Express. This is

recommended for evaluations.
SolarWinds strongly recommends maintaining
SolarWinds servers as physically separate from your
SQL server.
SQL Server Express 3.5 SP2 is only supported for NPM
evaluations.
Due to latency effects, SolarWinds does not recommend
installing your SQL Server and your Orion server or additional polling engine in different locations across a
WAN. For more information, see SolarWinds Knowledge Base article, Can I install my Orion server or Additional Polling Engine and my Orion database (SQL
Server) in different locations across a WAN?
Either mixed-mode or SQL authentication must be supported.
If you are managing your Orion database, SolarWinds
recommends you install the SQL Server Management
Studio component.
Use the following database select statement to check
your SQL Server version, service pack or release level,
and edition:
select SERVERPROPERTY ('productversion'),
SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
English with collation setting SQL_Latin1_General_CP1_CI_AS

SQL Server
Collation
English with collation setting SQL_Latin1_General_CP1_CS_

AS
German with collation setting German_PhoneBook_CI_AS
Japanese with collation setting Japanese_CI_AS
CPU Speed
Simplified Chinese with collation setting Chinese_PRC_CI_AS

2.0 GHz
2.4 GHz
3.0 GHz
42
Hard Drive
Space
Memory
.NET
Framework
2 GB
5 GB
20 GB
Note: Due to intense I/O requirements, a RAID 1+0 drive is
strongly recommended the SQL Server database and Orion data
and log files. RAID 5 is not recommended for the SQL Server
hard drive. The Orion installer needs at least 1GB on the drive
where temporary Windows system or user variables are stored.
Per Windows standards, some common files may need to be
installed on drive as your server operating system. For more
information, see Working with Temporary Directories.
2 GB
3 GB
4 GB
Note: SolarWinds recommends additional RAM, up to 8 GB, for
SAM installations including more than 1000 monitors.
.NET is not required if your database is on a separate server.

Orion installations on VMware Virtual Machines and Microsoft Virtual Servers are
fully supported if the following minimum requirements are met for each VM.
Notes:
l
SolarWinds strongly recommends that you maintain your SQL Server database on a separate physical server.
SolarWinds does not support or allow installations of SolarWinds NPM
on domain controllers.
Orion Requirements by License Level

VM
SL100, SL250, or
Configuration
SL2000
SLX
SL500
CPU Speed 2.0 GHz
2.4 GHz
3.0 GHz
2.5 GB
5 GB
20 GB
Allocated
Note: Due to intense I/O requirements, SQL Server should be
Hard Drive hosted on a separate physical server configured as RAID 1+0.
Space
RAID 5 is not recommended for the SQL Server hard drive.
Memory
3 GB
4 GB
8 GB
Each virtual machine on which Orion is installed should have its
Network
own, dedicated network interface card.
Interface
Note: Since Orion uses SNMP to monitor your network, if you are
43

unable to dedicate a network interface card to your Orion server,
you may experience gaps in monitoring data due to the low priority
generally assigned to SNMP traffic.

The Orion Installation Wizard installs the following required x86 components if
they are not found on your Orion database server:
l
l
l
SQL Server System Common Language Runtime (CLR) Types for

SolarWinds Orion NPM 10.2 and older. Orion products use secure SQL
CLR stored procedures for selected, non-business data operations to
improve overall performance.
Microsoft SQL Server Native Client
Microsoft SQL Server Management Objects
SNMP Requirements for Monitored Devices

NPM can monitor the performance of any SNMPv1-, SNMPv2c-, or SNMPv3enabled device on your network. If a device is SNMPv2c-enabled, by default,
NPM will attempt to use SNMPv2c to poll the device for performance information.
If you only want NPM to poll using SNMPv1, you must disable SNMPv2c on the
device to be polled. Consult your device documentation or a technical
representative of your device manufacturer to acquire specific instructions for
configuring SNMP on your device.
Notes:
l
Monitored devices must allow access to the SysObjectID for correct device
identification.
Unix-based devices should use the configuration of Net-SNMP version 5.5
or higher that is specific to the type of Unix-based operating system in use.
Orion NPM is capable of monitoring VMware ESX and ESXi Servers versions 3.5 and higher with VMware Tools installed. For more information
about enabling SNMP and VMware Tools on your VMware device, consult
your VMware documentation or technical representative.
Enabling Microsoft Internet Information Services

(IIS)
To host the Orion Web Console, Microsoft Internet Information Services (IIS) must
be installed and enabled on your Orion server. Windows Server 2003 requires IIS
44

version 6, and Windows Server 2008 requires IIS version 7, as detailed in the
following sections:
l
l
l


The following procedure enables IIS on Windows Server 2003.
To enable IIS on Windows Server 2003:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Click Start> Control Panel> Add or Remove Programs.

Click Add/Remove Windows Components.
Click Application Server, confirm it is checked, and then click Details.
Click Internet Information Services (IIS), confirm it is checked, and then click
Details.
Click World Wide Web Service, confirm it is checked, and click Details.
Select World Wide Web Service, confirm it is checked, and then click OK.
Click OK on the Internet Information Services (IIS) window, and then click
OK on the Application Server window.
Click Management and Monitoring Tools, confirm it is checked, and then
click Details.
Confirm that both Simple Network Management Protocol and WMI SNMP
Provider are checked, and then click OK.
Click Next on the Windows Components window, and then click Finish after
completing the Windows Components Wizard.
Note: You may be prompted to install additional components, to provide your
Windows Operating System media, or to restart your computer. Restart your
server if prompted, but Orion does not require the Phone Book Service.
If you are currently enabling IIS as part of an Orion installation, restart the
Orion installer. For more information, see the installation instructions in the
Administrator Guide for your specific Orion product.

1.
2.
3.
4.
Click Start> All Programs> Administrative Tools> Server Manager.

Click Roles in the left pane, and then click Add Roles in the main pane.
Click Next to start the Add Roles Wizard.
Check Web Server (IIS).
45

5. If you are prompted to add features required for Web Server (IIS), click
Add Required Features.
6. Click Next on the Select Server Roles window, and then click Next on the
Web Server (IIS) window.
7. Confirm that Common HTTP Features> Static Content is installed.
8. Check Application Development> ASP.NET, and then click Add Required
Role Services.
9. Check both Security> Windows Authentication and Security> Basic
Authentication.
10. Check Management Tools> IIS 6 Management Compatibility, and then
click Next on the Select Role Services window.
11. Click Install on the Confirm Installation Selections window, and then click
Close on the Installation Results window.
12. If you are currently enabling IIS as part of an Orion installation, restart the

1. Click Start> All Programs> Administrative Tools> Server Manager.
2. Click Manage in the top right, and then click Add Roles and Features.
3. Select Role-based or feature-based installation as the Installation Type,
and then click Next.
4. Select the server on which you are enabling IIS, and then click Next.
5. Check Web Server (IIS) in the list of Server Roles, and then click Next.
6. IIS does not require any additional Features. Click Next.
7. Review the provided Web Server Role (IIS) notes, and then click Next.
8. Confirm that Common HTTP Features> Static Content is installed.
9. Check Application Development> ASP.NET, and then click Add Required
Role Services.
10. Check both Security> Windows Authentication and Security> Basic
Authentication.
11. Check Management Tools> IIS 6 Management Compatibility.
12. Click Next on the Select role services window.
13. Click Install on the Confirm installation selections window, and then click
Close on the Installation Results window.
46
Enabling and Requiring Secure Channels with SSL

14. If you are currently enabling IIS as part of an Orion installation, restart the
Enabling and Requiring Secure Channels with

SSL
Orion supports the use of Secure Sockets Layer certificates to enable secure
communications with the Orion Web Console. The following sections provide
procedures for enabling SSL connections to the Orion Web Console:
l
l
l
l


The following procedure enables SSL connections to an Orion Web Console
installed on Windows Server 2003.
Notes:
l Secure SSL communications are conducted over port 443.
l The following procedure does not describe the processes either of obtaining a required certificate or of generating a certificate signing request for a
third-party certificate authority. Your NPM server must already have the
required SSL certificate installed. For more information, see the article from
which the following procedure was adapted at http://support.microsoft.com/kb/298805.
To enable SSL connections to the web console on Windows Server 2003:
1. Log on to your NPM server using an account with administrative privileges.
2. Click Start> Control Panel> Administrative Tools> Computer Management.
3. Expand Services and Applications> Internet Information Services(IIS)
Manager> Web Sites.
4. Click SolarWinds NetPerfMon, and then click Action> Properties.
5. Open the Web Site tab, confirm that SSL port is set to 443, and then click
Apply.
6. Click Advanced.
47

7. If the Multiple SSL identities for this Web site field does not list the IP
address for the Orion Web Console with SSL port 443, complete the following steps.
a. Click Add, and then select the IP address of the Orion Web Console.
Note: As it was set initially in the Configuration Wizard, this option is
usually set to (All Unassigned). If the IP address of the Orion Web Console was not initially set to (All Unassigned), select the actual, configured IP address of the Orion Web Console.
b. Type 443 as the TCP port, and then click OK.
8. Click the Directory Security tab, and then click Edit in the Secure communications section.
9. Check Require secure channel (SSL), and then select Accept client certificates in the Client certificates area.
10. Click OK on the Secure Communications window.
11. Click Apply, and then click OK to exit.

The following procedure enables SSL connections to an Orion Web Console
installed on Windows Server 2008.
Note: The following procedure does not describe the processes either of
obtaining a required certificate or of generating a certificate signing request for a
third-party certificate authority. Your NPM server must already have the required
SSL certificate installed. For more information, see the article from which the
following procedure was adapted at http://support.microsoft.com/kb/298805.
To enable SSL connections to the web console on Windows Server 2008:
1. Log on to your NPM server using an account with administrative privileges.
2. Click Start> Administrative Tools> Internet Information Services(IIS)
Manager.
3. In the Connections pane, expand the name of your Orion server, and then
expand Sites.
4. Click SolarWinds NetPerfMon, and then click Bindings in the Actions pane
on the right.
5. Click Add in the Site Bindings window.
6. In the Type: field, select https, and then confirm that Port is set to 443.
Note: Secure SSL communications are conducted over port 443.
7. In the SSL Certificate field, select a certificate, and then click OK.
8. Click Close on the Site Bindings window.
9. In the IIS group, click SSL Settings, and then check Require SSL.
10. Click Apply in the Actions group on the right.
48

11. In the Connections pane, click SolarWinds NetPerfMon.
12. Click Restart in the Manage Web Site group on the right.

The procedure to enable SSL connections to an Orion Web Console installed on
Windows Server 2012 is currently provided in the SolarWinds Knowledge Base
article, "Enabling SSL Connections on Windows Server 2012".

The following procedure enables Secure Sockets Layer (SSL) security (https) for
the Orion Web Console.
To enable SSL for the Orion Web Console:
1. Log on to your Orion server using an account with administrative rights.
2. Click Start > All Programs > SolarWinds Orion > Advanced Features >
Orion Service Manager, and then click Shutdown Everything.
Note: It may take a few minutes to stop all services.
Database Manager.
4. If your SQL Server is not listed in the left pane, click Add default server.
5. If you need to add your Orion database because it is not listed in the left
pane, complete the following steps:
a. Click Add SQL Server.
b. Using the format Server/Instance, select or provide the SQL Server instance
you are using as your Orion database.
c. Select the appropriate login method, providing credentials as required.
d. Click Connect to Database Server.
6. Expand your Orion database in the left pane.
7. Right-click the Websites table, and then click Query Table.
8. Replace the default query with the following query:
UPDATE dbo.WebsitesSET SSLEnabled=1WHERE WebsiteID=1
9. Click Refresh.
Orion Service Manager.
11. Click Start Everything.
Note: It may take a few minutes to restart all services.
12. If you want to use a designated SSL port, such as the default https port
443, for the web console, complete the following procedure to change the
web console port:
49

a. Click Start > All Programs > SolarWinds Orion > Configuration and
Auto-Discovery > Configuration Wizard.
b. Check Website, and then click Next on the Welcome window.
c. Enter the designated SSL port number in the Port field, and then click
Next.
Note: Port 443 is typically reserved for SSL traffic.
d. Review the configuration summary, and then click Next.
e. Click Finish when the Configuration Wizard completes.

The following procedure configures the web console to require SSL connections.
To configure the web console to require SSL:
1. In a text editor, open the web console configuration file, web.config, on your
primary SolarWinds server.
Note: By default, web.config is located in C:\Inetpub\SolarWinds\.
2. In the <system.web> section, add the following line:
<httpCookies requireSSL="true" />
3. Locate the line <forms loginUrl="~/Orion/Login.aspx" />, and then edit it to <forms
loginUrl="~/Orion/Login.aspx" requireSSL=true />.
4. If you want to enable the HTTPOnly flag for added security, locate the
<httpCookies> tag, and then edit it to the following:
<httpCookies httpOnlyCookies="true" requireSSL="true" />
5. Save and close web.config.
Antivirus Directory Exclusions

To ensure that all Orion products have access to all required files, the following
directories, listed by operating system, should be excluded from antivirus
protection:
Notes:
l
Do not exclude executable files.

C:\ is the default install volume.
Windows Server 2003 and Windows XP:

l
c:\Documents and Settings\All Users\Application Data\SolarWinds\
Windows Server 2007, Windows Vista, and Windows 2008

l
c:\ProgramData\SolarWinds\
50

SolarWinds License Manager is a free utility allows you to easily migrate Orion
licenses from one computer to another without contacting SolarWinds Customer
Service. The following sections provide procedures for installing and using
License Manager:
l
l


Install License Manager on the computer from which you are migrating currently
licensed products.
Note: You must install License Manager on a computer with the correct time. If
the time on the computer is even slightly off, in either direction, from Greenwich
Mean Time (GMT), you cannot reset licenses without contacting SolarWinds
Customer Service. Time zone settings neither affect nor cause this issue.
To install License Manager:
1. Click Start> All Programs> SolarWinds> SolarWinds License Manager
Setup.
2. Click I Accept to accept the SolarWinds EULA.
3. If you are prompted to install the SolarWinds License Manager application, click Install.

You must run License Manager on the computer where the currently licensed
SolarWinds product is installed before you can migrate licenses to a new
installation. The following procedure deactivates currently installed licenses that
can then be transferred to a new installation.
To deactivate currently installed licenses:
1. Click Start> All Programs> SolarWinds> SolarWinds License Manager.
2. Check the products you want to deactivate on this computer, and then click
Deactivate.
3. Specify your SolarWinds Customer ID and password when prompted, and
then click Deactivate.
Note: Deactivated licenses are now available to activate on a new computer.
51

When you have successfully deactivated your products, log on to the computer on
which you want to install your products, and then begin installation. When asked
to specify your licenses, provide the appropriate information. The license you
deactivated earlier is then assigned to the new installation.
Installing Orion Network Performance Monitor

Any installation or upgrade of NPM requires completion of both the installer and
the Configuration Wizard, as detailed in the following sections:
Note: Downgrades of Orion products are not supported. If you are upgrading or
installing multiple Orion products, confirm that you are installing them in the order
given in the Upgrade Instructions located in your SolarWinds Customer Portal.
l
l


Before completing an NPM installation, ensure that the server on which you are
installing NPM currently meets or exceeds stated requirements. For more
information, see Orion NPM Requirements on page38.
Notes:
l
SolarWinds strongly recommends that you create a backup of your

database before performing any upgrade. For more information, see
Using SQL Server Management Studio on page362.
If you are upgrading from a previous version of Orion Network Performance
Monitor, see Upgrading Orion Network Performance Monitor on page57.
SolarWinds does not currently support upgrades from one locale to
another. If you want to upgrade your SolarWinds installation to use a new
locale, you must complete a clean SolarWinds installation using the new
locale.
If you are using Internet Explorer, SolarWinds recommends that you add
the URL of your Orion website (http://FullOrionServerName/), the URL of
SolarWinds support (http://support.solarwinds.com), and about:blank to the list
of trusted sites. For more information about adding sites to your trusted
sites list, see the Microsoft article, Working with Internet Explorer 6 Security Settings.
For evaluation purposes only, Orion NPM may be installed on Windows 7,
Windows XP, or Windows Vista. SolarWinds does not, however, support or
52
recommend installing Orion NPM on these operating systems in production environments.

When installing Orion NPM on Windows XP, you must confirm that Shared
Memory, Named Pipes, and TCP/IP are enabled on remote databases.
SolarWinds does not support or allow installations of SolarWinds NPM
on domain controllers.
The following procedure installs Orion NPM.

To install Orion Network Performance Monitor:
1. As an administrator, log on to your NPM server.
2. If you downloaded the product from the SolarWinds website, navigate to
your download location, and then launch the executable file.
3. If you received physical media, browse to the SolarWinds Orion executable,
and then launch it.
4. If you are prompted to install requirements, click Install, and then complete
the installation, including a reboot, if required.
Notes:
l
Downloading and installing both Microsoft .NET Framework 3.5 SP1 and
Microsoft .NET Framework 4.0 may take more than 20 minutes, depending
on your existing system configuration.
If a reboot is required, after restart, click Install to resume installation, and then
click Next on the Welcome window.
5. If you want to use the Orion Improvement Program to send anonymous
data about your Orion usage to SolarWinds, click Yes, send data.
6. Review the Welcome text, and then click Next.
7. Select your preferred language, and then click Next.
Note: This selection cannot be changed later.
8. If the Orion Network Performance Monitor Setup Wizard detects that
Microsoft Internet Information Services (IIS) is not installed, select
Suspend installation to manually install IIS, click Finish, quit setup, and
then install IIS.
Notes:
l
The Orion Web Console requires that Microsoft IIS is installed on the NPM
Server. If you do not install IIS at this point, you must install IIS later, and
then configure a website for the Orion Web Console to use.
A browser window may open automatically to display the SolarWinds
Knowledge Base article, Enabling IIS: What IIS components does Orion
53
9.
10.
11.
12.
13.
14.
15.
16.
NPM require?. This article provides instructions for enabling IIS on Windows Server 2003 and 2008, Windows XP, Windows Vista, and Windows
7.
If an IIS installation was required, launch the installer again, and then click
Next on the Welcome window.
Note: A server reboot may be required after installing IIS.
Accept the terms of the license agreement, and then click Next.
If you want to install NPM in a destination folder other than the default
given, click Browse, select an installation folder, and then click OK.
Click Next on the Choose Destination Location window.
Confirm the current installation settings, and then click Next.
Click Finish when the Setup Wizard completes.
If you are evaluating NPM, click Continue Evaluation.
If you are installing a production version of NPM, click Enter Licensing
Information, and then complete the following procedure to license NPM:
a. If you have both an activation key and access to the internet, select
the first option, I have internet access and an activation key, enter
your Activation Key, and then click Next.
Note: If you are using a proxy server to access the internet, check I
access the internet through a proxy server, and then provide the
Proxy address and Port.
b. If you do not have access to the internet from your designated
NPM server, select This server does not have internet access,
click Next, and then complete the steps provided.
The Orion Configuration Wizard should load automatically. For more information
about completing the Orion Configuration Wizard, see Completing the Orion
Configuration Wizard on page54.

The following procedure using the Orion Configuration Wizard completes and
configures your Orion NPM installation.
Notes:
l
Confirm that you have designated a SQL Server database instance for
NPM. For more information, see Orion NPM Requirements on page38.
Confirm that the Internet Information Services (IIS) Manager is not open
while the Configuration Wizard is running.
SolarWinds recommends that you close any and all browsing sessions
that may be open to the web console before starting the Configuration Wizard.
54

l
During configuration, the Orion polling engine will shut down temporarily
with the result that, if you are actively polling, you may lose some polling
data. SolarWinds recommends that you perform upgrades during off-peak
hours of network usage to minimize the impact of this temporary polling
stoppage.
To configure Orion Network Performance Monitor:

1. If the Configuration Wizard has not loaded automatically, click Start> All
Programs> SolarWinds Orion> Configuration and Auto-Discovery>
Configuration Wizard.
2. Click Next on the Welcome dialog of the Configuration Wizard.
3. If you are prompted to stop services, click Yes.
Note: To ensure that all updates and changes are installed correctly, it is
imperative that you stop all services.
4. Specify the SQL Server instance you want to use to store network data.
Notes:
l
o
o
o
If you are using SQL Express, specify your instance as (local) and use a
strong password. For more information about authentication with strong
passwords, see http://msdn.microsoft.com/ms143705.aspx. Due to its inherent limitations, SolarWinds recommends against the use of SQL Express
in production environments.
The selected instance must support either mixed-mode or Windows authentication with strong passwords. A strong password must meet at least three
of the following four criteria:
Contains at least one uppercase letter.
Contains at least one lowercase letter.
Contains at least one number.
o Contains at least one non-alphanumeric character, e.g., #, %, or ^.
For more information about authentication with strong passwords, see

http://msdn.microsoft.com/ms143705.aspx.
5. Select the type of authentication you want to use, and then provide credentials, if required, to log into the selected instance.
Notes:
l
In general, SolarWinds recommends using SQL Server Authentication to ensure that the NPM server can always access the SQL
Server, even when it is hosted remotely on a separate server.
If you are using an existing database, the user account needs only to be
in the db_owner database role for the existing database.
55
If you are using an existing SQL account, the user account needs only
to be in the db_owner database role for the Orion NPM database.
If you are creating a new database, the user account must be a member
of the dbcreator server role. The sysadmin role and the sa user account are
always members of dbcreator.
If you are creating a new SQL account for use with Orion NPM, the
user account must be a member of the securityadmin server role.
Note: The sysadmin role and the sa user account are always members of
securityadmin.
6. Click Next.
7. If you are creating a new database, select Create a new database, provide
a name for the New Database, and then click Next.
Note: SolarWinds recommends against using non-alphanumeric characters in
database names.
8. If you are using an existing database, select Use an existing database,
type the database name or select it from the list, and then click Next.
9. If you want to create a new SQL account for the Orion NPM polling
engine and web console to use for accessing the database, select Create
a new account, provide an account name and password, confirm the account
password, and then click Next.
10. If you want to use an existing SQL account to provide database access
to the Orion NPM polling engine and web console, select the existing
account, provide the appropriate password, and then click Next.
11. If you need to specify a particular IP Address for the Orion NPM Web Console, provide the IP address of the host web server.
Note: SolarWinds recommends the default (All Unassigned) unless your
environment requires a specific IP address for your Orion Web Console.
12. Specify both the Port through which you want to access the web console and
the Website Root Directory into which you want to install web console files.
Note: If you specify any port other than 80, you must include that port in the
URL used to access the web console. For example, if you specify an IP
address of 10.120.0.3 and port 8080, the URL used to access the web console is
http://10.120.0.3:8080.
13. If you want to enable automatic login using Windows Authentication,
select Yes Enable automatic login using Windows Authentication.
Note: Manual login using Windows Authentication is always available, regardless of whether or not automatic login is enabled.
14. Click Next.
15. If you are prompted to create a new directory, click Yes.
56

16. If you are prompted to create a new website, click Yes.
Note: Choosing to overwrite the existing website will not result in the deletion
of any custom Orion NPM website settings you may have previously applied.
17. Confirm that all services you want to install are checked.
Note: Typically, all listed services should be selected for installation.
18. Click Next.
19. If you are prompted to disable the SNMP Trap Service and enable the
SolarWinds Trap Service, click Yes to disable the (Windows) SNMP Trap
Service and enable the SolarWinds Trap Service.
20. Review the final configuration items, and then click Next.
21. Click Next on the Completing the Orion Configuration Wizard dialog.
22. Click Finish when the Orion Configuration Wizard completes.
23. Log in to the Orion Web Console as an administrator.
Notes:
By default, until you change your account, you can log in with User name
Admin and no password.
l If you are prompted to install the Toolset integration (SWToolset.exe), click
More Options, select a response, and then click Install or Dont Install, as
appropriate. For more information, see Integrating SolarWinds Engineers
Toolset on page196.
24. If you need to discover and add network devices to the Orion database,
the Network Discovery Wizard starts. For more information, see Discovering
and Adding Network Devices on page62.
l

Complete the following procedure when you are upgrading NPM from a previous
version or upgrading the licensed number of elements you can monitor.
Notes:
l
SolarWinds does not currently support upgrades from one locale to

another. If you want to upgrade your SolarWinds installation to use a new
locale, you must complete a clean SolarWinds installation using the new
locale.
SolarWinds recommends that you backup your database before any
upgrade. For more information about creating database backups, see
Using SQL Server Management Studio on page362.
While it is being upgraded, your Orion polling engine will shutdown temporarily with the result that you may lose some polling data. SolarWinds
57
l
l
recommends that you perform upgrades during off-peak hours of network

usage to minimize the impact of this temporary polling stoppage.
Discovery profiles from older Orion NPM versions are not retained through
upgrades. If you want to retain a discovery profile, prior to starting your
upgrade, externally record the configuration of the profiles you want to
retain.
If your currently installed version of Orion NPM is older than version
7.8.5, you must upgrade to Orion NPM 7.8.5.
If you currently have Orion NPM version 7.8.5 through 8.5 installed,
you must upgrade to Orion NPM 8.5.1.
If you currently have Orion NPM version 8.5.1, upgrade to version 9.1.
If you currently have Orion NPM version 9.0 through 9.5.1, you must
upgrade to version 10.2 before upgrading to the current version.
Specific instructions for completing an upgrade are available in the SolarWinds

Customer Portal. For more information about upgrading Orion NPM, particularly if
you are upgrading an NPM installation that includes Orion modules, log in to your
SolarWinds Customer Portal at www.solarwinds.com/customerportal/, click
License Management, and then click Upgrade Instructions under the license
listing of any Orion product. The following procedure completes an NPM upgrade.
To upgrade Orion Network Performance Monitor:
1. If you are using more than one polling engine to collect network information, shut down all polling engines before continuing.
2. Using the local administrator account, log on to the computer on which you
want to upgrade Orion Network Performance Monitor.
3. If you downloaded the product from the SolarWinds website, navigate to
your download location and then launch the executable.
5. Orion Network Performance Monitor automatically detects the previous installation. When prompted to upgrade the current installation, click Next.
Note: All customizations, including web console settings, are preserved.
6. Accept the terms of the license agreement, and then click Next.
7. Confirm the current installation settings, and then click Next on the Start Copying Files window.
8. Provide required information on the Install Software License Key window.
Note: You need your customer ID and password to successfully install the
key. For more information, see Software License Key on page378.
9. Click Continue, and then click Continue again when the license is installed.
10. Review the Upgrade Reminder, and then click Next.
11. Click Finish on the InstallShield Wizard Complete window.
58

12. Complete the Configuration Wizard. For more information, see Completing
the Orion Configuration Wizard on page54.

The standard NPM evaluation period is 30 days. At the end of thIs period you will
be prompted to either buy a license to NPM or enter information corresponding to
an NPM license you have already purchased. At any point in your evaluation
period, if you have purchased an NPM license, you may upgrade your evaluation
license as indicated in the following procedure.
To upgrade an NPM evaluation license:
1. Click Start> All Programs> SolarWinds Orion> Network Performance
Monitor> Network Performance Monitor Licensing.
2. Click Enter Licensing Information.
3. If the computer on which you installed Orion NPM is connected to the
Internet, complete the following procedure:
a. Select I have internet access...
b. Browse to http://www.solarwinds.com/customerportal/, and then log in
using your SolarWinds CustomerID and password.
Note: If you do not know your SolarWinds CustomerID and password
and you are not on active maintenance, contact the SolarWinds Maintenance Renewal team at maintenance@solarwinds.com. If you do not
know your SolarWinds CustomerID and password and you are on active maintenance, submit a customer service ticket at www.solarwinds.com/support/ticket/.
c. Click License Management.
d. Browse to Orion Network Performance Monitor, and then locate the
Unregistered Licenses list.
e. Copy your unregistered Orion NPM activation key to the clipboard, and
then paste it into the Activation Key field on the Activate NPM window.
f. If you are using a proxy server to access the Internet, check I
access the internet through a proxy server, and then type the proxy
address and port number.
g. Click Next.
4. If the computer on which you are installing Orion NPM is not connected
to the Internet, complete the following procedure:
a. Select This server does not have internet access, and then click
Next.
b. On the Activate Product window, click Copy Unique Machine ID.
59

c. Paste the copied data into a new document in a text editor, and then
save the text document.
d. Transfer the document to a computer with internet access.
e. On the computer with internet access, browse to http://www.solarwinds.com/customerportal/.
f. Log in using your SolarWinds CustomerID and password.
Note: If you do not know your SolarWinds CustomerID and password
and you are not on active maintenance, contact the SolarWinds Maintenance Renewal team at maintenance@solarwinds.com. If you do not
know your SolarWinds CustomerID and password and you are on active maintenance, submit a customer service ticket at www.solarwinds.com/support/ticket/.
g. Click License Management.
h. Browse to Orion Network Performance Monitor, and then click Manually Register License.
i. Provide the Unique Machine ID you transferred in Step 3, above, and
then download your license key.
j. Transfer the license key to a shared location, and then, on the server
that does not have internet access, browse to the shared License Key
File location from the Activate Product window.
60
61
Chapter 3: Discovering and Adding

Network Devices
Orion products use either Network Sonar discovery and import or Node
Management in the Orion Web Console to discover objects for monitoring. The
method recommended largely depends on the number of devices to be added.
l
To discover and add a larger number of devices across your enterprise, the
Network Sonar and Network Sonar Results Wizards are available. For
more information, see Network Discovery Using the Network Sonar Wizard on page63.
The web console provides an easy-to-use Web Node Management to discover and add individual objects for monitoring. For more information, see
Managing Devices in the Web ConsoleCore on page1.
There are two waysWeb Node Management and Network Sonar discoveryto
add nodes to the Orion database. To discover and add a larger number of devices
across your enterprise, the Network Sonar and Network Sonar Results Wizards
are available. This chapter provides instructions for quickly populating your NPM
database with the network objects you want to monitor and manage with NPM.
The Orion Web Console also provides an easy-to-use Web Node Management
wizard suited to discovering and adding individual network objects. For more
information, see Monitoring Devices in the Web Console on page1.
Discovery Central
Discovery Central provides a centralized overview of the types and number of
network objects you are monitoring with your currently installed SolarWinds
products. The Discovery Central view is subdivided into sections corresponding
to the SolarWinds products you have installed. The Network Discovery section
displays for all node-based products. For more information about Network
Discovery, see Network Discovery on page63. For more information about
specific sections, see the Administrator Guide for the corresponding SolarWinds
product.
62

Clicking Go to Orion Home opens the Summary Home view for your entire
monitored network.
Network Discovery
The Network Discovery resource provides the number of nodes and volumes that
are currently monitored. This information is both available and applicable to all
installed SolarWinds products.
Click Network Sonar Discovery to start a Network Sonar Discovery. For more
information, see Network Discovery Using the Network Sonar Wizard on
page63.
Click Add a Single Device to open the Add Node Define Node view of the
Orion Node Management utility. For more information, see Managing Devices in
the Web ConsoleCore on page1.
Interface Discovery
The Interface Discovery resource provides the number of interfaces on which you
can monitor network traffic. To discover interfaces on your network, simply
discover or add the parent node and SolarWinds will automatically discover any
and all interfaces on the designated parent node. This information is available
and applicable to SolarWinds Network Performance Monitor (NPM) and all
installed SolarWinds NPM modules.
Click Network Sonar Discovery to start a Network Sonar Discovery. For more
information, see Network Discovery Using the Network Sonar Wizard on
page63.

The easy-to-use Network Sonar Wizard directs you in the discovery of objects for
monitoring on your network. Before using the Network Sonar Wizard, consider the
following points about network discovery and SolarWinds NPM:
l
The Network Sonar Wizard recognizes network devices that are already in
your SolarWinds database and prevents you from importing duplicate
devices.
CPU and Memory Utilization charts are automatically enabled for your Windows, Cisco Systems, VMware, and Foundry Networks devices.
The community strings you provide in the Network Sonar Wizard are only
used for SNMP GET requests, so read-only strings are sufficient.
63

l
The Interfaces page of the Network Sonar Results Wizard allows you to
select interfaces for monitoring.
The following procedure steps you through the discovery of devices on your
network using the Network Sonar Wizard.
To discover devices on your network:
1. If the Network Sonar Wizard is not already open, click Start> All
Programs> SolarWinds Orion> Configuration and Auto-Discovery> Network Discovery.
2. If you want to create a new discovery, click Add New Discovery.
3. If you have already defined a network discovery, a number of options are
available on the Network Sonar Discovery tab. Select one of the following:
l If you want to edit an existing discovery before using it, select the discovery you want to edit, and then click Edit.
l If you want to use an existing discovery to rediscover your network,
select the discovery to use, click Discover Now, and then complete the
Network Sonar Results Wizard after dicovery completes. For more information, see Using the Network Sonar Results Wizard on page69.
l If you want to import some or all devices found in a defined discovery
that you may not have already imported for monitoring, select a
defined discovery, and then click Import All Results. For more information, see Using the Network Sonar Results Wizard on page69.
l If you want to import any newly enabled devices matching a defined
discovery profile, select a currently defined discovery, and then click
Import New Results. For more information about network discovery results, see Using the Network Sonar Results Wizard on page69.
If you want to delete an existing discovery profile, select a currently defined
discovery and then click Delete.
4. If the devices on your network do not require community strings other
than the default strings public and private provided by NPM, click Next on
the SNMP Credentials view.
5. If any of your network devices require community strings other than public and private or if you want to use an SNMPv3 credential, complete the following steps to add the required SNMP credential.
Notes:
l
If you intend to use SNMPv3 for monitoring VLAN interfaces on Cisco

devices, confirm that all relevant VLAN contexts are added to all VLAN
groups defined for your monitored Cisco devices.
64

Repeat the following procedure for each new community string. To speed
up discovery, highlight the most commonly used community strings on your
network, and then use the arrows to move them to the top of the list.
a. Click Add New Credential, and then select the SNMP Version of your
new credential.
b. If you are adding an SNMPv1 or SNMPv2c credential, provide the
new SNMP Community String.
c. If you are adding an SNMPv3 credential, complete the following
fields:
l User Name, Context, and Authentication Method
l Authentication Password/Key, Privacy/Encryption Method and Password/Key, if required.
d. Click Add.
e. Click Next on the SNMP Credentials view.
If you want to discover any VMware VCenter or ESX Servers on your network, confirm that Poll for VMware is checked.
Note: If you know there are VMware devices on your network that you want to
monitor, confirm that you check Poll for VMware. Nodes cannot be identified
as VMware devices unless Poll for VMware is enabled.
If you want to discover VMware devices on your network, repeat the following procedure for each VMware credential you add or edit. To speed up discovery, use the arrows to move the most commonly used credentials on your
network to the top of the list.
a. Click Add vCenter or ESX Credential.
b. If you are using an existing VMware credential, select the appropriate credential from the Choose Credential dropdown menu.
c. If you are adding a new VMware credential, select <New Credential> in the Choose Credential dropdown menu, and then provide
a new credential name in the Credential Name field.
Note: SolarWinds recommends against using non-alphanumeric characters in credential names.
d. Add or edit the credential User Name and Password, as necessary.
e. Confirm the password, and then click Add.
Click Next on the Local vCenter or ESX Credentials for VMware view.
If you want to discover any WMI or RPCenabled Windows devices on
your network, complete the following steps to add or edit credentials.
l
6.
7.
8.
9.
Notes:
l
SolarWinds NPM does not currently poll interfaces on WMI- or

RPCenabled nodes.
65

Repeat the following procedure for each new credential. To speed up discovery,
use the arrows to move the most commonly used credentials on your network to
the top of the list.
a. Click Add New Credential.
b. If you are using an existing Windows credential, select the appropriate
credential from the Choose Credential dropdown menu.
c. If you are adding a new Windows credential, select <New Credential>
in the Choose Credential dropdown menu, and then provide a new credential name in the Credential Name field.
Note: SolarWinds recommends against using non-alphanumeric characters in credential names.
d. Add or edit the credential User Name and Password, as necessary.
e. Confirm the password, and then click Add.
10. Click Next on the Windows Credentials view.
11. If you want to discover devices located on your network within a specific
range of IP addresses, complete the following procedure.
Note: Only one selection method may be used per defined discovery.
a. Click IP Ranges in the Selection Method menu, and then, for each IP
range, provide both a Start address and an End address.
Note: Scheduled discovery profiles should not use IP address ranges
that include nodes with dynamically assigned IP addresses (DHCP).
b. If you want to add another range, click Add More, and then repeat
the previous step.
Note: If you have multiple ranges, click X to delete an incorrect range.
c. If you have added all the IP ranges you want to poll, click Next.
12. If you want to discover devices connected to a specific router or on a
specific subnet of your network, complete the following procedure:
Note: Only one selection method may be used per defined discovery.
a. Click Subnets in the Selection Method menu.
b. If you want to discover on a specific subnet, click Add a New Subnet, provide both a Subnet Address and a Subnet Mask for the
desired subnet, and then click Add.
Note: Repeat this step for each additional subnet you want to poll.
c. If you want to discover devices using a seed router, click Add a
Seed Router, for each seed router, provide the IP address of the
Router, and then click Add.
Notes:
l
Network Sonar reads the routing table of the designated router and offers
to discover nodes on the Class A network (255.0.0.0 mask) containing the
66

seed router and, if you are discovering devices for an Orion NPM installation, the Class C networks (255.255.255.0 mask) containing all interfaces
on the seed router, using the SNMP version chosen previously on the
SNMP Credentials page.
l Networks connected through the seed router are NOT automatically selected for discovery.
d. Confirm that all networks on which you want to conduct your network
discovery are checked, and then click Next.
13. If you already know the IP addresses or hostnames of the devices you
want to discover and include in the Orion database, complete the following
procedure:
Note: Use this method to add devices with both IPv4 and IPv6 addresses.
a. Click Specific Nodes in the Selection Method menu.
b. Type the IP addresses or hostnames of the devices you want to discover for monitoring into the provided field.
Note: Type only one IP address or hostname per line.
c. Click Validate to confirm that the provided IP addresses and hostnames are assigned to SNMP-enabled devices.
d. If you have provided all the IP addresses and hostnames you want
to discover, click Next.
14. Configure the options on the Discovery Settings view, as detailed in the following steps.
a. Provide a Name and Description to distinguish the current discovery
profile from other profiles you may use to discover other network areas.
Note: This Description displays next to the Name in the list of available
network discovery configurations on the Network Sonar view.
b. If you are completing an SNMP discovery, position the slider or type
a value, in ms, to set the SNMP Timeout.
Note: If you are encountering numerous SNMP timeouts during Network Discovery, increase the value for this setting. The SNMP Timeout
should be at least a little more than double the time it takes a packet to
travel the longest route between devices on your network.
c. Position the slider or type a value, in ms, to set the Search Timeout.
Note: The Search Timeout is the amount of time Network Sonar Discovery waits to determine if a given IP address has a network device
assigned to it.
d. If you are completing an SNMP discovery, position the slider or type
a value to set the number of SNMP Retries.
Note: This value is the number of times Network Sonar Discovery will
67
15.
16.
17.
18.
retry a failed SNMP request, defined as any SNMP request that does
not receive a response within the SNMP Timeout defined above.
e. If you are completing a WMI discovery, position the slider or type a
value to set the number of WMI Retries.
Note: This value is the number of times Network Sonar Discovery will
retry a failed WMI request, defined as any WMI request that does not
receive a response within the WMI Retry Interval defined above.
f. If you are completing a WMI discovery, position the slider or type a
value to set the WMI Retry Interval.
Note: This value is the length of time Network Sonar Discovery will
retry any WMI request that does not receive a response.
g. Position the slider or type a value to set the Hop Count.
Note: If the Hop Count is greater than zero, Network Sonar Discovery
searches for devices connected to any discovered device. Each connection to a discovered device counts as a hop.
h. Position the slider or type a value to set the Discovery Timeout.
Note: The Discovery Timeout is the amount of time Network Sonar Discovery is allowed to complete a network discovery. If a discovery takes
longer than the Discovery Timeout, the discovery is terminated.
If you only want to discover devices that respond to SNMP or WMI
polling, check Ignore nodes that only respond to ICMP (ping).
Note: By default, Network Sonar uses ICMP ping requests to locate devices.
Most information about monitored network objects is obtained using SNMP
queries, but WMI is supported for Windows devices.
If multiple Orion polling engines are available in your environment, select
the Polling Engine you want to use for this discovery.
Click Next.
If you want the discovery you are currently defining to run on a regular
schedule, select either Custom or Daily as the discovery Frequency, as
shown in the following steps:
Notes:
l
Scheduled discovery profiles should not use IP address ranges that

include nodes with dynamically assigned IP addresses (DHCP).
Default Discovery Scheduling settings execute a single discovery of your
network that starts immediately, once you click Discover.
Results of scheduled discoveries are maintained on the Scheduled Discovery Results tab of Network Discovery. For more information about managing scheduled discovery results, see Managing Scheduled Discovery
Results on page72.
68

a. If you want to define a custom discovery schedule to perform the
currently defined discovery repeatedly in the future, select Custom
and then provide the period of time, in hours or minutes, between discoveries.
b. If you want your scheduled discovery to run once daily, select
Daily, and then provide the time at which you want your discovery to
run every day, using the format HH:MM AM/PM.
19. If you do not want to run your network discovery at this time, select No,
dont run now, and then click Save or Schedule, depending on whether you
have configured the discovery to run once or on a schedule, respectively.
20. If you want your Network Sonar discovery to run now, click Discover to
start your network discovery.
Note: Because some devices may serve as both routers and switches, the
total number of Nodes Discovered may be less than the sum of reported
Routers Discovered plus reported Switches Discovered.
Using the Network Sonar Results Wizard

The Network Sonar Results Wizard directs you through the selection of devices
for monitoring, and it opens whenever discovery results are requested, either
when the Network Sonar Wizard completes or when either Import All Results or
Import New Results is clicked for a selected discovery. For more information,
see Network Discovery Using the Network Sonar Wizard on page63.
To select the results of a network discovery for monitoring in NPM:
1. On the Device Types to Import page, check the device types you want
NPM to monitor, and then click Next.
Note: If you are not sure you want to monitor a specific device type, check
the device type in question. If, later, you do not want to monitor a selected
device, simply delete the device using Web Node Management. For more
2. The Interfaces view of the Network Discovery Wizard provides powerful
selection and filtering options to customize your discovery results, as follows:
Note: If you are not sure you want to monitor a specific interface type,
check the interface type in question. If, later, you do not want to monitor a
selected interface, delete it using Web Node Management. For more
a. In the Selection Criteria area, check the appropriate Status, Port
Type, and Hardware properties of the interfaces you want to
69
3.
4.
5.
6.
7.
8.
monitor.
b. If you want to select discovered interfaces using keywords,
phrases or regular expressions, click + to expand Advanced
selection options, select from the available advanced options, as
desired, and then click Reselect Interfaces.
c. In the List of Interfaces area, check the Interface Types you want
On the Volume Types to Import page, check the volume types you want
Note: If you are not sure you want to monitor a specific volume type, check
the volume type in question. If, later, you do not want to monitor any
volume of the selected type, delete the volume using Web Node Management. For more information, see Monitoring Devices in the Web Console on page1.
If you want to import nodes, even when they are already known to be
polled by another polling engine, check the option in the Allow Duplicate Nodes section. For more information about working with multiple
polling engines, see Managing Orion Polling EnginesCore on
page237.
Check valid states for imported interfaces on the NPM Import Settings
page, and then click Next.
Note: By default, NPM NPM imports interfaces that are discovered in an
Operationally Up state. However, because interfaces may cycle off and on
intermittently, the Import Settings page allows you to select interfaces
found in Operationally Down or Shutdown states for import, as well.
If there are any devices on the Import Preview that you do not ever
want to import, check the device to ignore, and then click Ignore. Selected nodes are added to the Discovery Ignore List. For more information,
see Using the Discovery Ignore List on page73.
Confirm that the network objects you want to monitor are checked on the
Import Preview page, and then click Import.
If you are discovering devices for an Orion NPM installation, after the
import completes, click Finish.
Note: Imported devices display in the All Nodes resource.

In versions of NPM products following the release of Orion NPM version 10.0, the
Specific Nodes option in the Network Discovery Wizard may be used to import
70

devices from a seed file, as indicated in the following procedure.
Note: A Seed File discovery option is available in Orion NPM prior to version 10.
To import devices from a seed file:
1. Open your seed file.
2. If the Network Sonar Wizard is not already open, click Start> All
Programs> SolarWinds Orion> Configuration and Auto-Discovery>
Network Discovery.
3. If you want to create a new discovery, click Add New Discovery, click
Add New Discovery.
4. If you have already defined a network discovery, a number of options
are available on the Network Sonar Discovery tab. Select one of the following:
a. If you want to edit an existing discovery before using it, select
the discovery you want to edit, and then click Edit.
b. If you want to use an existing discovery to rediscover your network, select the discovery to use, click Discover Now, and then
complete the Network Sonar Results Wizard after dicovery completes. For more information, see Using the Network Sonar Results
Wizard on page69.
c. If you want to import some or all devices found in a defined discovery that you may not have already imported for monitoring,
select a defined discovery, and then click Import All Results. For
more information, see Using the Network Sonar Results Wizard on
page69.
d. If you want to import any newly enabled devices matching a
defined discovery profile, select a currently defined discovery, and
then click Import New Results. For more information about network
discovery results, see Using the Network Sonar Results Wizard on
page69.
e. If you want to delete an existing discovery profile, select a currently defined discovery and then click Delete.
5. If the devices on your network do not require community strings
other than the default strings public and private provided by NPM, click
Next on the SNMP Credentials view.
6. If you need to supply new SNMP credentials to discover the devices
in your seed file, click Add New Credential, provide the required information, and then click Add. For more information, see Network Discovery
Using the Network Sonar Wizard on page63.
7. Click Next on the SNMP Credentials view.
71

8. If you intend to import known VMware vCenter or ESX servers and
you need to supply new VMware credentials to discover these servers in your seed file, complete the following steps on the Local vCenter or
ESX Credentials for VMware view:
a. Check Poll for VMware, and then click Add vCenter or ESX Credential.
Note: If you know there are VMware devices on your network that
you want to monitor, confirm that you check Poll for VMware.
Nodes cannot be identified as VMware devices unless Poll for
VMware is enabled.
b. Provide the required information, and then click Add.
Note: For more information, see Network Discovery Using the Network Sonar Wizard on page63.
9. Click Next, and then click Specific Nodes in the Selection Method menu.
10. Copy and then paste the IP addresses or hostnames of the devices you
want to discover from your seed file into the provided field.
Note: Confirm that no line has more than one IPv4 address or hostname.
11. Click Validate to confirm that the provided IP addresses and hostnames
are assigned to SNMP-enabled devices.
12. If you have provided all the IP addresses and hostnames you want to
discover, click Next.
13. Complete the Network Discovery and Network Discovery Results Wizards.
For more information, see Network Discovery Using the Network Sonar
Wizard on page63.

The Scheduled Discovery Results tab of Network Discovery provides a list of all
recently discovered, changed, or imported devices on your monitored network.
Results are compared between discoveries, and results are listed on this tab. The
following procedure provides guidelines for managing discovery results.
To manage scheduled discovery results:
1. Click Start> All Programs> SolarWinds Orion> Configuration and
Auto-Discovery> Network Discovery.
2. Click Scheduled Discovery Results.
3. Select the type of devices you want to view from the Status menu in the left
pane. The following options are available:
l Select Found to view all devices discovered by a scheduled discovery.
72

Select Changed to view all devices that have changed between
recent scheduled discoveries. Changes include the addition of interfaces and device configuration changes.
l Select Imported to view all devices you have recently imported
youre your Orion database. For more information about importing
devices, see Using the Network Sonar Results Wizard on
page69.
l Select Ignored to view all devices you have added to your Discovery Ignore List. For more information about the Discovery Ignore
List, see Using the Discovery Ignore List on page73.
l Select Found and Changed to view a combined list of all devices
found or changed as described above.
l Select All except Ignored to view all discovered, changed or imported devices you have not already designated as Ignored, as
detailed above.
4. If you want to apply a grouping criterion to organize your listed results, select an appropriate criterion from the Group by: menu in the left
pane.
5. If there are changed or discovered nodes in the results list that you
want to update your Orion database to include, check all nodes to
update or to add, and then click Import Nodes.
6. If there are devices you want NPM to ignore in future discoveries,
regardless of discovered updates or changes, check all nodes to
ignore, and then click Add to Ignore List. For more information about the
Discovery Ignore List, see Using the Discovery Ignore List on page73.
l
Using the Discovery Ignore List

Often, devices are found during a network discovery that you never intend to
monitor with NPM. The Discovery Ignore List is a record of all such devices on
your network. By placing a device on the Discovery Ignore List you can minimize
the SNMP processing load associated with discovering devices that you never
intend to monitor.
To manage devices on the Discovery Ignore List:
1. Click Start> All Programs> SolarWinds Orion> Configuration and
Auto-Discovery> Network Discovery.
2. If you want to view the current Discovery Ignore List, click Discovery
Ignore List.
73

3. If you want to add devices to the Discovery Ignore List, complete the
following procedure:
a. Click Scheduled Discovery Results.
b. Check devices you want to ignore, and then click Add to Ignore
List.
4. If you want to remove devices from the Discovery Ignore List, complete the following procedure:
a. Click Scheduled Discovery Results, and then check the devices
you want to remove from the list.
b. Click Remove from Ignore List.
c. Confirm that you want to stop ignoring selected items by clicking
OK.

SolarWinds maintains a MIB database that serves as a repository for the OIDs
used to monitor a wide variety of network devices. This MIB database is updated
regularly, and, due to its size, it is not included in the initial NPM installation
package.If you are either updating your existing MIB database or using the
Universal Device Poller for the first time, you will need to download the
SolarWinds MIB database as detailed in the following procedure.
Note: You may need to restart the Universal Device Poller after installing the new
MIB database.
To download and install the SolarWinds MIB database:
1. If you are responding to a prompt to download and install the
SolarWinds MIB database, click Yes.
Note: This prompt is typically only encountered by first-time users.
2. If you are downloading an update to your existing SolarWinds MIB
database, complete the following procedure:
a. Use your SolarWinds Customer ID and Password, to log in to the
Customer Portal (http://www.solarwinds.com/customerportal/).
b. On the left, under Helpful Links, click Orion MIB Database.
3. If you are using Internet Explorer and it prompts you to add the
SolarWinds downloads site http://solarwinds.s3.amazonaws.com, complete the following steps to start the MIB database download:
a. Click Add on the warning window.
b. Click Add on the Trusted Sites window.
74
4.
5.
6.
7.
c. Click Close, and then refresh your browser.

Click Save on the File Download window.
Navigate to an appropriate file location, and then click Save.
After the download completes, extract MIBs.zip to a temporary location.
Open the folder to which you extracted MIBs.zip, and then copy MIBs.cfg
to the SolarWinds folder in either of the following locations on your default
install volume, depending on your NPM server operating system:
l \Documents and Settings\All Users\Application Data\ on Windows Server 2003 and XP.
l \Users\All Users\Solarwinds\ on Windows Server 2008 and
Vista.
75
Chapter 4: Managing Orion NPM in

the Web Console
The Orion Web Console is an integral part of the Orion family of products that can
be configured for viewing from virtually any computer connected to the Internet.
You can also customize the web console interface for multiple users, and
individually customized views may be stored as user profiles. The following
chapter provides web console configuration and management information that is
specific to an installation of Orion Network Performance Monitor. For more
information about general Orion Web Console configuration and management,
see Managing the Web ConsoleCore on page1.
Logging in to the Orion Web Console

The default URL for the Orion Web Console is the fully-qualified domain name
(FQDN) of the server on which your SolarWinds Orion product is installed,
followed by the Orion directory. For example, if you have installed Orion NPM on a
server with FQDN OrionServer, the Orion Web Console URL is
http://OrionServer/Orion/.
Orion Network Performance Monitor Thresholds

Many of the resources available in the Orion Web Console are capable of
displaying error and warning conditions for the devices on your network. Errors
and warnings display in the Orion Web Console NPM uses the values provided
on the thresholds pages to determine when and how to display errors and
warnings in the Orion Web Console. The following sections provide more
information about threshold types and configuration:
l
l
l

Note: For more information about Orion General Thresholds, see Orion
Thresholds on page1.
76

The following device condition thresholds are available for configuration as
Network Performance Monitor thresholds:
Note: For more information about Orion Thresholds, see Orion Thresholds on
page1.
Cisco Buffer Misses
Many Cisco devices can report buffer misses. Monitored network devices
with more buffer misses than the value set for the High Level display as
bold red in Cisco Buffer resources. Monitored network devices with more
buffer misses than the value set for the Warning Level, but fewer than the
value set for the High Level, display as red in Cisco Buffer resources.
Interface Errors and Discards
Monitored interfaces experiencing more errors and discards than the value
set for the Error Level display as bold red in High Errors and Discards
reports and resources. Monitored interfaces experiencing more errors and
discards than the value set for the Warning Level, but fewer than the value
set for the Error Level, display as red in High Errors and Discards reports
and resources.
Interface Percent Utilization
Monitored interfaces experiencing current percent utilization higher than the
value set for the High Level display in High Percent Utilization reports and
resources. Gauges for these devices also display as bold red. Monitored
interfaces experiencing current percent utilization higher than the value set
for the Warning Level, but lower than the value set for the High Level,
display in High Percent Utilization reports and resources. Gauges for these
devices also display as red.

The following procedure opens the Network Performance Monitor Thresholds
view to set NPM thresholds.
To set NPM thresholds:
2. Click Settings in the top right of the web console, and then click NPM
Thresholds in the Settings grouping.
Note: For more information about Network Performance Monitor
77

thresholds, see Network Performance Monitor Threshold Types on
page77.
3. Provide appropriate values for Error Level, High Level, or Warning Level
for selected thresholds.

In addition to the default charts provided with any Orion installation, NPM
provides the following interface-related charts, grouped by type, as resources
within the Orion Web Console that you can customize for your own use.
Note: To add any interface chart to a web console view dealing with monitored
interfaces, add the Custom Interface Chart resource. For more information about
adding resources to views, see Editing Views on page1. For more information
about customizable chart types available in the web console, see Custom NPM
Interface Charts on page1.
Discards and Errors Charts
The following charts are available to display information about discards and
errors on interfaces monitored by Orion NPM.
l
l
l
In/Out DiscardsStep Chart

In/Out ErrorsStep Chart
In/Out Errors and DiscardsStep Chart
Percent Utilization Charts

The following charts are available to display percent utilization information for
monitored interfaces in Orion NPM.
l
l
l
l
Min/Max/Average Percent Utilization

Min/Max/Average Transmitted + Received Traffic Percent Utilization
Percent UtilizationLine Chart
Percent UtilizationStep Chart
Traffic Charts
The following charts are available to display information about interface traffic,
including multicast traffic, on devices monitored by Orion NPM.
l
l
l
l
Average bpsLine Chart

Average bpsStep Chart
Average Packets per Second
Min/Max/Average bps In/Out
78
l
l
l
l
l
l
l
l
Min/Max/Average bps Received

Min/Max/Average bps Transmitted
Min/Max/Average bps Transmit+Receive
Min/Max/Average bps Transmit+Receive Percent Utilization
Min/Max/Average Packets In/Out
Multicast Traffic
Total Bytes Transferred
Total Packets Transmitted/Received
Other Charts
The following charts are also available to display information about monitored
interfaces.
l
Custom Interface Chart enables you to create your own custom interface
chart.
Multiple Object Chart enables you to create your own custom charts that
compare data for multiple monitored objects.
79
SolarWinds Orion Integrated Virtual Infrastructure Monitoring (IVIM) built into NPM
lets you monitor today's modern network fabric of virtual networks, virtualized data
centers, and private clouds. The deep visibility into your virtualized environments
helps you ensure that network performance helps and not hinders your
virtualization projects
NPM is capable of monitoring Microsoft Hyper-V and VMware ESXi and ESX
Servers versions 3.5 and higher
VMware Monitoring
Monitor your entire VMware virtual infrastructure from the highest to the lowest
level: vCenter datacenter cluster ESX hosts individual virtual
machines. Track availability and performance metrics including CPU, memory,
storage, and network bandwith utilization
Virtual Machine Auto-Summary
Automatically discover identify and monitor new virtual machines added to any
VMware host server or updated during vMotion.
Virtualization Alerting and Reporting
SolarWind Orion's native alerting and reporting capabilities extend seamlessly to
your virtual infrastructure.
For more extensive virtualization monitoring, integrate SolarWinds NPM with
SolarWinds Virtualization Manager. For more information, see Virtualization
Manager at www.solarwinds.com.
Requirements for Monitoring ESXi and ESX Servers

The following table provides minimal requirements for effectively using NPM to
monitor your VMware ESXi and ESX Servers.
Requirement Description
80
NPM uses SNMP to monitor all ESXi and ESX Servers. For more
SNMP
information about enabling SNMP, see "Enabling SNMP on
VMware ESXi and ESX Servers" on page82.
NPM uses the VMware API to poll most performance data from
devices running ESXi and ESX Server versions 3.5 and 4.0. For
VMware API
more information about creating required credentials, see Creating
ESX Server Credentials for NPM on page86.
VMware Tools must be installed on all ESXi and ESX Servers you
intend to monitor. VMware Tools is not required on virtual
VMware
machines running on monitored ESXi and ESX servers, but
Tools
additional information, including IP addresses, are made available
when VMware Tools is installed on virtual machines hosted by
monitored ESXi and ESX Servers.
The following table provides a summary of the methods used by NPM to monitor
VMware ESX Servers and their component features.
Features
3.5
3i 4
4i
5i
Datacenter
VMware API
ESX Cluster
VMware API
Virtual Center
VMware API
Detection as ESX Server VMware API
Volumes
SNMP N/A SNMP N/A
SNMP
Interfaces
SNMP N/A SNMP SNMP (partial) SNMP
CPU
VMware API
Memory
VMware API
Total CPU
VMware API
(ESX Details view)
Total Memory
VMware API
(ESX Details view)
Network Traffic Utilization
VMware API
(ESX Details view)
Guest VM List
VMware API
(ESX Details view)
81

NPM uses SNMP to poll performance data from VMware ESXi and ESX Servers.
In order to make this performance data available to NPM, you must enable SNMP
on your ESXi and ESX Servers, as described in the following sections:
Note: VMware only makes a limited amount of information available to SNMP
queries for VMware ESXi and ESX Servers version 4.0 and higher. To access
additional information on these versions, NPM utilizes the VMware API.
l
l
l


The following procedure enables SNMP on VMware ESXi.
Note: The vSphere command line interface (CLI) is required, but it is not
packaged with your ESXi Server. Download it from VMware, as indicated.
To enable SNMP on VMware ESXi:
1. Download the VMware vSphere command line interface from the VMware
Download Center (http://downloads.vmware.com/d/).
2. Install the VMware vSphere command linie interface.
3. Use the vSphere CLI to view your ESXi server SNMP settings, as indicated in the following procedure:
a. In the Perl\bin directory of your vSphere installation, execute the following script:
perl ..\..\bin\vicfg-snmp.pl --server ip_address s
Notes:
l
C:\Program Files\VMware\VMware vSphere CLI\Perl\bin is
the default location of
the vSphere Perl\bin directory.

Replace ip_address with the IP address of your ESXi server, and replace
cstring with the community string you are adding. For most environments,
the community string public should be sufficient.
b. Enter an appropriate user name at the prompt.
Note: For most environments, root should be sufficient.
c. Enter the associated password at the prompt.
4. Use the vSphere CLI to enable SNMP on your ESXi server, as indicated in
the following procedure:
l
82
a. In the Perl\bin directory of your vSphere installation, execute the following script to add an appropriate community string:
perl ..\..\bin\vicfg-snmp.pl --server ip_address -c cstring
Note: Replace ip_address with the IP address of your ESXi server, and replace
cstring with the community string you are adding. For most environments, the
community string public should be sufficient.
b. Enter an appropriate user name at the prompt.
c. Enter the associated password at the prompt.
d. In the Perl\bin directory of your vSphere installation, execute the following script to enable SNMP:
perl ..\..\bin\vicfg-snmp.pl --server ip_address E
Note: Replace ip_address with the IP address of your ESXi server.

e. Enter an appropriate user name at the prompt.
f. Enter the associated password at the prompt.
5. Reboot your ESXi server to allow settings to take effect.

The following procedure enables SNMP on ESX Server version 3.5.
Note: For more information about ESX Server 3.5 and ESX Server MIBs, see the
VMware document, Basic System Administration - ESX Server 3.5, ESX Server
3i version 3.5, VirtualCenter 2.5.
To enable SNMP on ESX Server version 3.5:
1. Log in to your ESX Server using an account with administrative privileges,
and then open snmpd.conf in a text editor.
Notes:
l The default location for snmpd.conf is root/etc/snmp/snmpd.conf.
l To use the default text editor, nano, in a default ESX Server version 3.5
environment, enter nano /etc/snmp/snmpd.conf at the prompt.
2. Locate the rocommunity setting and replace the default community string
public with an appropriate read-only community string for your environment.
Note: Use commas to separate multiple community strings.
3. Save snmpd.conf, and then close your editor.
Note: If you are using nano, press Ctrl+X to close nano, and then enter Y to
save snmpd.conf.
83

4. Enter chkconfig snmpd on to enable SNMP on when you reboot your ESX
Server.
5. Enter esxcfg-firewall -e snmpd to allow SNMP through the ESX Server firewall.
6. Enter service snmpd start to start the SNMP service.
7. Confirm that SNMP polling is enabled on your ESX Server by entering the
following command:
snmpwalk -v1 -c cstring localhost .1.3.6.1.4.1.6876 | grep 6876.1
Note: Replace cstring with the community string you provided above.
8. After entering the snmpwalk command, your ESX Server should return
information similar to the following:
SNMPv2-SMI::enterprises.6876.1.1.0 = STRING: "VMware ESX Server"SNMPv2-SMI::enterprises.6876.1.2.0 = STRING: "3.5.0"SNMPv2-SMI::enterprises.6876.1.3.0 = OID: SNMPv2SMI::enterprises.6876.60.1.3.5.0SNMPv2-SMI::enterprises.6876.1.4.0 = STRING: "153875"
Note: The MIB OID SNMPv2-SMI::enterprises.6876.1.4.0 returns the build number for
your product, so it may not be the same as the build number displayed above.

The following procedure enables both the system default SNMP daemon snmpd
and the proprietary VMware SNMP daemon vmware-hostd on VMware ESX Server
version 4.0.
Note: For more information about ESX Server 4.0 and ESX Server MIBs, see the
VMware document, vSphere Basic System Administration - Update 1, ESX 4.0,
ESXi 4.0, vCenter Server 4.0.
To enable SNMP on ESX Server version 4.0:
1. Log in to your ESX Server using an account with administrative privileges.
2. Open snmp.xml in a text editor.
Notes:
l The default location for snmp.xml is root/etc/vmware/snmp.xml .
l To use the default text editor, nano, in a default ESX Server version 4 environment, enter nano /etc/vmware/snmp.xml at the prompt.
3. Locate the communities tag, and then replace the default community string
public with an appropriate read-only community string for your environment.
Note: Use commas to separate multiple community strings.
4. Locate the enable tag, and then confirm it is set to true.
5. Locate the port tag and confirm it is set to 171.
6. Locate the targets tag and confirm it is set to 127.0.0.1@162/cstring.
84
7. Save snmp.xml, and then close your editor.
save snmp.xml.
8. Enter service snmpd stop to confirm that the SNMP service is stopped.
9. Open snmpd.conf in a text editor.
Notes:
l The default location for snmpd.conf is root/etc/snmp/snmpd.conf.
l To use the default text editor, nano, in a default ESX Server version 4 environment, enter nano /etc/snmp/snmpd.conf at the prompt.
10. Edit snmpd.conf to include the following two lines:
view systemview included .1.3.6.1.4.1.6876
proxy -v 1 -c cstring 127.0.0.1:171 .1.3.6.1.4.1.6876
11. Save snmpd.conf, and then close your editor.
save snmpd.conf.
12. Enter service mgmt-vmware restart to restart the mgmt-vmware service.
13. Enter service snmpd start to start the SNMP service.
14. Enter chkconfig snmpd on to enable SNMP when you reboot your ESX
Server.
15. Enter esxcfg-firewall -e snmpd to allow SNMP through the ESX Server firewall.
16. Confirm that SNMP polling is enabled on your ESX Server by entering the
following command:
snmpwalk -v1 -c cstring localhost .1.3.6.1.4.1.6876 | grep 6876.1
17. After entering the snmpwalk command, your ESX Server should return
information similar to the following:
SNMPv2-SMI::enterprises.6876.1.1.0 = STRING: "VMware ESX"SNMPv2-SMI::enterprises.6876.1.2.0 = STRING: "4.0.0"SNMPv2-SMI::enterprises.6876.1.4.0 = STRING:
"208167"
Note: The OID SNMPv2-SMI::enterprises.6876.1.4.0 returns your product build

number, so it may not be the same as the build number above.

VMware has provided a document outlining the required steps to enable the
native SNMP agent on ESX Server version 5.0 and higher. For instructions on
85

enabling the native SNMP agent on VMware ESX Server versions 5.0 and
higher, see the VMware knowledge base article, "Configuring SNMP Traps in
ESXi/ESX (1008065)".

NPM uses the VMware API to poll most of its performance data from devices
running ESX Server versions 3.5 and 4.0. You must create credentials on your
ESX Servers for the NPM polling engine, as shown in the following procedure.
Note: Credentials created for the NPM polling engine must have read-only rights
as a minimum.
To create ESX Server credentials for NPM:
1. Log in to your ESX Server using an account with administrative privileges.
Note: Typically, the root user name and password is sufficient.
2. If you are prompted with an untrusted SSL certificate warning, click
Ignore to continue using the current SSL certificate.
3. Open the Users & Groups tab, and then click Users.
4. Right-click the Users view, and then click Add.
5. On the Add New user window, complete the following procedure:
Note: The User Name and Password provided in this step must be
provided either in your initial network discovery or whenever you use Web
Node Management to add the current ESX Server to NPM for monitoring.
a. Provide both a Login and a User Name for the NPM polling engine.
b. Enter and confirm a Password.
c. Click OK.
6. Open the Permissions tab, right-click the Permissions view, and then click
Add Permission.
7. On the Assign Permissions window, click Add.
8. Select the user you just created, and then click Add.
9. Click OK on the Select Users and Groups window.
10. Select an appropriate role in the Assigned Role area, and then click OK on
the Assign Permissions window.
The credential you have created is now available to use for monitoring your ESX
Server. For more information about adding your ESX Server to the Orion
database for monitoring, see Managing VMware Credentials in the Web
Console on page87.
86
Managing VMware Credentials in the Web Console

If you have to update the user name or password of a VMware credential, you can
do so from the VMware Credentials Library tab.
To update a VMware credential:
1.
2.
3.
4.
5.
6.
Log in to the web console.

Click Settings.
Click VMware Settings in the Node & Group Management section.
Click the VMware Credentials Library tab.
Check the credential you need to update, and then click Edit Credential.
Make the necessary updates, and then click OK.
Adding VMware Servers for Monitoring

VMware Vcenter, ESX servers, and virtual machines are added to the Orion
database in the same ways other devices are added for monitoring in the Orion
Web Console.
Polling for VMware nodes Using the Network Sonar Wizard
The Network Sonar Wizard is the recommended method for adding VM Servers
for monitoring in the Orion Web Console. With Network Sonar Discovery, you can
define all required credentials at once on the Local ESX Credentials for Vmware
view. For more information, see "Network Discovery Using the Network Sonar
Wizard" on page63.
Note: When configuring Network Sonar Discovery, confirm that you check Poll
for VMware on the VMware page of the Network Sonar Wizard. Nodes cannot be
identified as VMware devices unless Poll for VMware is enabled.
Adding VMs from the VMware Assets Resource
1. Log in to the web console.
2. Click Home> Virtualization.
3. Click the [+] next to any ESX or Vcenter server listed in the Virtualization
Assets resource to expand the list of virtual machines.
4. Click a virtual machine that is not currently managed by SolarWinds Orion.
Unmanaged VMs are listed in italic type.
5. Click Yes, Manage this Node.
87
6. If the VM is not running VMware Tools, manually enter the IP address of
the VM in the Hostname or IP Address field.
7. Check additional options required to monitor the VM, and then click Next.
8. Follow the remainder of the Add Node wizard to completion, and then click
OK, Add Node.
The Virtualization Summary view shows the overall status of your virtualized
infrastructure.
To view the Virtualization Summary:
1. Log in to the Orion Web Console.
2. Click Home> Virtualization.
The Virtualization Summary view is pre-configured to display the following
resources:
Top 10 VMware Hosts by CPU Load
Top 10 VMware Hosts by Percent
Memory Used
VMware Assets
Top 10 VMware Hosts by Number of

Running VMs
Top 10 VMWare Hosts by Network
Utilization
VMware Asset Summary
To change any resource properties or contents, click Edit in the resource box.
Viewing ESX Host Details

The ESX Host Details page opens when you click an ESX Host server in the
Virtualization Summary. This page displays the following resources, by default:
Active Alerts on this Node
Availability Statistics
Average Reponse Time & Packet Loss Average Response Time & Packet Loss
Graph
Gauge
CPU Load & Memory Utilization Gauge Disk Volumes
ESX Host Details
Event Summary
List of Virtual Machines
Min/Max AverageCPU Load Graph
Node Details
Polling Details
Virtual Machine CPU Consumption
Virtual Machine Memory Consumption
Virtual Machine Network Traffic
88
To change any resource properties or contents, click Edit in the resource box.
Changing Polling Orders for ESX Servers

If your VMware ESX hosts are controlled by VMware vCenter servers,
SolarWinds Orion obtains the status of the ESX hosts from the vCenter server
instead of polling the ESX hosts directly.
To poll the ESX servers directly you must change the Poll Through setting of the
ESX host from the VMware Settings page. From this page, you can also disable
and enable polling for ESX hosts and vCenter servers.
To poll a vCenter-managed ESX Host from the SolarWinds Orion server:
1.
2.
3.
4.
Log in to the web console.

Click Settings.
Click VMware Settings in the Node & Group Management section.
Point to any column heading, click the upside-down triangle, and then click
Columns > Polling Through.
5. Select the ESX hosts you want to poll directly.
6. Click Poll Through > Poll ESX server directly.
89
Chapter 6: Monitoring EnergyWise

Devices
SolarWinds has partnered with Cisco to present EnergyWise to optimize energy
usage on your network. EnergyWise technology enables you to configure energy
usage policies for EnergyWise-enabled and power-over-Ethernet (PoE) devices.
What is EnergyWise?
EnergyWise is a Cisco technology developed to help you cut enterprise energy
costs, address environmental concerns, and adhere to government directives
around green technologies. By deploying EnergyWise capable devices and by
enabling their energy-saving features, you can run business-critical systems in a
fully powered state while allowing less critical devices on Power over Ethernet
(PoE) ports to power down or drop into standby during off-peak hours.
The following terms and concepts are provided in the EnergyWise MIB and used
within EnergyWise resources in the Orion Web Console.
Domain
The EnergyWise MIB includes a field for labeling groups of EnergyWise
capable devices, or entities, as members of a designated domain. With
respect to NPM, a single domain consists of all monitored EnergyWise
entities defined as neighbors
Entity
Any network device, including switches, IP phones, and other components
connected to Power over Ethernet (PoE) ports on EnergyWise capable
devices, that either draws power from another network device or supplies
power to another network device.
Importance Level
The Importance Level, or, simply, the Importance, is a priority value ranging
from 1 to 100 that is assigned to both EnergyWise entities and EnergyWise
90

policies. The higher the value, the more important the device and the less
likely it is to be changed by energy policy modifications. When a policy
application is attempted, the importance levels of the policy and the
selected entity are compared to determine whether or not the policy is
actually applied to the selected entity. If the policy importance level is
greater than or equal to the entity importance level, the policy is applied to
the entity and the entity power level is changed. Likewise, as long as the
importance level of an entity to which policy applications are attempted is
greater than the importance levels of the policies applied, the entity power
level will remain unchanged.
For example, an IP phone assigned an importance level of 80 is operating
at a power level of 8. Policy A5, to change entity power levels to 5, has an
importance of 50, and Policy B10, to change entity power levels to 10, has
an importance of 95. If Policy A5 is applied to the phone, the phone will
continue to operate at power level 8. However, if Policy B10 is applied to
the phone, the phone power level changes to 10 in keeping with applied
Policy B.
The importance value may be used to exempt specific entities from policy
changes. For example, if all your emergency phones are on a single switch,
the switch should never go into standby mode. To ensure that the switch
hosting your emergency phones never goes into standby mode, set the
switch importance to 100 so all policies with an importance of 99 and lower
will have no effect on the emergency phone switch.
Keywords
The EnergyWise MIB provides for the identification of individual entities with
unique labels. When an entity is initially configured, keywords may be
added in series, as a string of words separated by commas without spaces,
as shown in the following example:
Keyword1,Keyword2,Keyword3
Name
A user-friendly identifier for an EnergyWise entity or domain that may be
assigned in the EnergyWise MIB when the entity or domain is configured.
The default name for a switch is the hostname, and the default name for a
Power over Ethernet (PoE) port is a shortened version of the port name.
EnergyWise name values cannot include spaces. Modifying the
EnergyWise name does not change the hostname of the device or the port
name on the device. Omit spaces and refrain from using asterisks (*) in your
91
name designations. Valid characters include alphanumeric characters and
symbols, including #, (, %, !, or &.
Neighbor
Any two EnergyWise entities defined within the same domain are
neighbors. Neighbors are capable of communicating EnergyWise events
including the issuance of energy management directives.
Policy Level
The Policy Level is the power level of the policy that is currently applied to
the selected entity.
Power Level
The Power Level is a designation of the amount of power an EnergyWise
entity is allowed to draw, based on the policies currently acting upon it. The
following table details available levels with category labels and icon colors.
Notes:
l
In some web console resources, the Power Level may be designated as

either the EnergyWise Level or the EW Level.
A known issue exists in some Cisco IOS versions where power levels are
reported as 1-11 and not as 0-10. Beginning with Orion NPM version 10.1.2,
power levels are automatically corrected within Orion NPM. Orion NPM
also properly handles this issue in the event that the IOS on a monitored
device is not affected by this known issue.
Level Label
Category
Color Color Code
10
Full
Red FF0000
9
High
8
Reduced
Operational (1)
Yellow FFFF00
7
Medium
6
Frugal
Green 00FF00
5
Low
4
Ready
Blue 0000FF
3
Standby
Standby (0)
2
Sleep
Brown A52A2A
1
Hibernate
0
Shut
Nonoperational (-1) Black 000000
92
Monitoring EnergyWise Devices with NPM

NPM provides the EnergyWise Summary view and related EnergyWise resources
to help you monitor the energy expended on your network and the energy savings
provided by EnergyWise-enabled devices. The following sections describe the
EnergyWise Summary view and related EnergyWise resources.
Notes:
l
Fully upgrade the IOS of all EnergyWise-enabled devices on your network.

For more information, consult your device documentation or www.cisco.com.
If the EnergyWise Summary view does not display in the Orion Web Console menu bar, see Adding the EnergyWise Summary View on page96.
EnergyWise Summary View and Resources

By default, the EnergyWise Summary view provides the following resources:
All Nodes
The All Nodes resource included on the EnergyWise Summary view is
configured to display your entire network in terms of EnergyWise capability.
All nodes on your network are included in one of the following groups:
l
The EnergyWise Capable group includes all monitored devices on which

the EnergyWise technology is available but not yet enabled.
The EnergyWise Enabled group includes all monitored devices on which
the EnergyWise technology is both available and enabled.
The Not EnergyWise Capable group includes all monitored devices that do not
feature the EnergyWise technology.
EnergyWise NCM Information
Network Configuration Manager (NCM) is the Orion module used for
network configuration and change management. This resource provides
some basic information about how Orion NCM can be used to manage
EnergyWise settings and policies on your network. For more information
about Orion NCM, including the option to download a free trial, click
Download NCM.
EnergyWise Reports
The EnergyWise Reports resource provides a list of reports detailing current
EnergyWise readiness and energy savings across your network.
Overall EnergyWise Savings
93

The Overall EnergyWise Savings resource provides a chart displaying the
difference between the maximum amount of power that can be consumed
and the actual amount of power that is consumed by all
EnergyWise-enabled devices on your network as a percentage of the
maximum amount of power that can be consumed.
Notes:
l
Graphed bars represent average savings over the designated interval.
Maximum and actual power consumption may be equivalent if you have not yet
enabled an EnergyWise management policy on your network.
Overall Historical Power Consumption
The Overall Historical Power Consumption resource displays a chart of both
the actual and the maximum amount of power consumed by all EnergyWise
entities on your network.
Note: Maximum and actual power consumption may be equivalent if you
have not yet enabled an EnergyWise management policy on your network.

In addition to the resources provided by default on the EnergyWise Summary
view, NPM provides the following EnergyWise resources for inclusion on other
Orion Web Console views, as indicated.
Note: For more information about the EnergyWise Summary view and its
resources, see EnergyWise Summary View and Resources on page93.
Device Power Consumption
The Device Power Consumption resource displays a chart of both the
actual and the maximum power consumed by a selected EnergyWise entity.
have not yet enabled an EnergyWise policy on the selected entity.
EnergyWise Interface Details
This resource provides both information about the selected interface entity
and the ability to immediately set the current Power Level of the selected
interface entity. For more information about setting the current Power Level,
see Managing EnergyWise Interface Entity Power Levels on page97.
The EnergyWise Interface Details resource provides the following
information about the selected interface entity:
94
The Name listing provides the user-friendly EnergyWise entity name that
has been defined for the viewed interface entity.
The Power Level listing provides the colored icon and label associated
with the power level currently reported by the viewed interface entity.
Note: The Power Level may be temporarily reset by clicking Set Power Level in
this resource. For more information, see Managing EnergyWise Interface Entity
Power Levels on page97.
l
The Policy Level listing provides the colored icon and label indicating the
power level of the policy currently applied to the viewed interface entity.
Notes:
o
The Policy Level is the same Power Level that is reported in the
EnergyWise Policy Overview Calendar for the currently viewed interface entity at the current local time of the viewed interface entity.
Policies are set either on the monitored device or with a configuration
management utility like Orion Network Configuration Manager. For
more information about Orion NCM, see www.solarwinds.com.
The Keywords listing provides any keywords that have been defined for the
viewed interface entity.
EnergyWise Node Details
The EnergyWise Node Details resource provides the following information
about the selected node entity:
l
The Domain Name listing provides the user-friendly name of the

EnergyWise domain that has been defined for the viewed node entity.
The Maximum Importance field indicates the importance level assigned to
the viewed node.
The Number of Neighbors field indicates the number of other currently monitored EnergyWise entities that are capable of communicating EnergyWise
directives to the viewed node entity.
The Status field communicates whether or not EnergyWise power management is

currently enabled on the viewed node entity.
EnergyWise Policy Overview Calendar
The EnergyWise Policy Overview Calendar resource provides a visual
record of policy- or configuration-based power level assignments for the
viewed entity. EnergyWise recurrence policies assign power levels on an
95

hourly basis, and this resource reports the assigned power levels, by the
hour, for the viewed entity over a selected week.
Notes:
l
All time references are in terms of the viewed entity and are not necessarily
the time of the Orion NPM server.
Policies are configured either on the monitored device itself or with a

configuration management utility like Orion Network Configuration Manager
(Orion NCM). For more information about Orion NCM, see www.solarwinds.com.
Entity Power Consumption
The Entity Power Consumption resource provides a chart displaying both
the maximum amount of power that can be consumed and the actual
amount of power that is consumed by the viewed EnergyWise-enabled
entity.
have not yet enabled an EnergyWise policy on the selected device.

The following procedure adds the EnergyWise Summary View to the Orion Web
Console Views menu bar.
To add the EnergyWise Summary view to the web console Views menu bar:
2. Click Settings in the top right of the web console, and then click Customize Menu Bars in the Customize grouping of the Orion Website Administration page.
3. Click Edit beneath the web console menu bar to which you want to add a
link to the EnergyWise Summary view.
4. Click and drag the EnergyWise button from the Available items list on the
left to the correct relative location in the Selected items list on the right.
Note: Selected items display from left to right in the selected menu bar as
they are listed from top to bottom.
5. Click Submit.
96
Managing EnergyWise Interface Entity Power

Levels
Although entity power levels are typically set using recurrence policies enacted
by a configuration management utility like Orion Network Configuration Manager
(Orion NCM), with NPM you can temporarily change the current power level of a
selected EnergyWise interface entity from either the Interface Details view for the
selected EnergyWise interface entity the Web Console Node Management utility.
In either case, the following procedure provides the steps required to temporarily
change the currently active power level of an EnergyWise interface entity.
Notes:
l
Any change made to the power level of a monitored EnergyWise entity is

only effective until the next scheduled application of a defined recurrence
policy. Policies are configured either manually on the monitored device
itself or with a configuration management utility like Orion NCM. For more
information about Orion NCM, see www.solarwinds.com.
A known issue exists in some Cisco IOS versions where EnergyWise
levels are reported as values 1-11 and not as values 0-10. Beginning with
Orion NPM version 10.1.2, reported levels are automatically corrected
within Orion NPM. Orion NPM also properly handles this issue in the event
that the IOS on a monitored device is not affected by this known issue.
To reset the current power level of a monitored EnergyWise entity:

1. Log in to the Orion Web Console using an account with node management
or administrator privileges.
2. If you want to set the entity power level from the Interface Details view,
click Set Power Level in the EnergyWise Interface Details resource.
3. If you want to use the Web Console Node Management utility, complete the following steps:
a. Click Home in the Views toolbar, and then click Manage Nodes in
the All Nodes resource.
b. Locate the device to edit using either of the following methods:
l Use the search tool above the node list to search your database for the parent node of the EnergyWise interface entity you want to reset.
l Select an appropriate Group by: criterion, and then click the appropriate
group including the parent node of the EnergyWise interface entity you
want to reset.
97
Managing EnergyWise Interface Entity Power Levels

c. Click + to expand the parent node of the EnergyWise interface entity
you want to reset, and then check the interface entity.
d. Click More Actions> Override Power Level.
4. Select the appropriate power level, and then click OK.
98

NPM can monitor any 802.11 IEEE-compliant autonomous access point (AP) or
wireless controller. Details about your access points (AP), wireless clients,
wireless controllers, thin APs, and rogue APs can all be monitored using NPM.
Wireless device monitoring is configured, customized, and managed using the
Orion Web Console, as shown in the following sections.
Getting Started
Orion Network Performance Monitor automatically recognizes your wireless APs
and controllers as wireless devices after they have already been added to the
Orion database. For more information on adding devices to Orion, see
"Discovering and Adding Network Devices" on page 62.
The wireless interfaces are not found during discovery process. Instead, after the
wireless device is added to Orion and an inventory is performed, each wireless
interface found is added to the database and polling begins.
Migrating Data from the Wireless Networks Module

If you have already owned an older version of the Wireless Network module and it
was installed, polling your wireless devices, before you upgraded past NPM
version 9.5, NPM will automatically migrate your historical data to the new format
used since NPM version 9.5.
Notes:
l The wireless migration will not be performed during installation or configuration. The migration is performed in batches during scheduled database maintenance. For more information, see Database Maintenance on
page1.
l The migration will notify users when a given node is migrated and when all
nodes have been migrated in the Orion event log.
l You will not see historical data immediately because this process is
throttled.
99
Viewing Wireless Data

The Wireless Summary view in the NPM Web Console displays a list of all
wireless APs and clients connected to each AP. Access point details include IP
address, device type, SSID, channels used, and the number of clients currently
connected. Client details include client name, SSID, IP Address, MAC Address,
Received Signal Strength Indication (RSSI), time connected, data rate, bytes
received and bytes transmitted. The following procedure presents the steps to
view wireless access points and clients in Orion NPM.
Notes:
l
NPM does not currently monitor IPv6 statistics for the following wireless
connections:
o between wireless users and access points.
o between thin access points and controllers.
The wireless details views uses device-specific node details views to display statistics. For more information, see Views by Device Type on
page1.
To view wireless access points and clients:

1.
2.
3.
4.
5.
Log in to the Orion Web Console as an administrator.

Click Wireless in the Views toolbar.
If you want to view access points, select Access Points from the Show list.
If you want to view clients, select Clients from the Show list.
If you want to filter the view using groups, select a method to group
access points or clients from the Group by: list.
6. If an access point has clients currently connected, expand the access
point name to show the list of clients connected.
7. If you want to search for access points or clients, type your search
string in the Search field, and then click Search.
Clicking any access point opens the Node Details view for the selected access
point.
Removing a Wireless Device

Removing wireless devices from NPM is performed the same way as removing
any node from an Orion product. For more information, see Deleting Devices
from Monitoring on page206.
100
Chapter 8: Creating and Managing

Alerts
Alerts are generated for network events, and they may be triggered by the simple
occurrence of an event or by the crossing of a threshold value for a monitored
Interface, Volume, or Node. Alerts can be set to notify different people on different
days, different times of the day, different people for different events, or any
combination of times, events, and people. Alerts may be configured to notify the
people who need to know about the emergent event by several mediums,
including:
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Sending an e-mail or page

Playing a sound on the Orion Network Performance Monitor server
Logging the alert details to a file
Logging the alert details to the Windows Event Log
Sending a Syslog message
Executing an external program
Executing a Visual Basic script
E-mailing a web page
Changing the value of a interface or node property
Playing a text to speech output
Dialing a paging or SMS service
Sending an SNMP trap
Posting a URL to a web server
Advanced Alerts Predefined by Default

By default, NPM provides a number of advanced alerts that are configured at
install. The following alerts are available as soon as the Orion Web Console is
installed, giving you immediate insight into the status and performance of your
network:
Note: Not all alerts are automatically enabled at install.
l
l
l
Alert when a node or group goes down

Alert when an interface is shut down
Alert when a node is deleted
101
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Alert when a group goes into a warning or critical state

Alert when any hardware component goes into a warning or critical state
Alert when a multicast routing group goes down
Alert when a multicast routing group has different status from normal
Alert when multicast routing group traffic is lower than a specified value
(bps)
Alert when multicast routing group traffic is lower than a specified value
(pps)
Alert when a managed node last poll time is 10 minutes old
Alert when a managed node has not been polled during the last 5 tries
Alert when a node reboots
High Physical Memory Utilization with Top 10 Processes
Alert on Cisco IOS version or IOS image family change
Alert me when a polling engine has not updated the database in 10
minutes
Alert when a node, interface, wireless access point, or group goes down
Alert when a node reboots
Alert when a device experiences high CPU utilization, high packet loss,
high response time, high receive percent utilization, or high transmit percent utilization
Alert when a managed node has not been polled during the last 5 tries
Alert when a polling engine has not updated the database in 10 minutes
Alert when a rogue access point is detected
Alert when a wireless access point has more than 10 clients
If, when you first log on to the Orion Web Console, there are any devices on your
network that trigger any of these alerts, the Active Alerts resource on the Orion
Summary Home view displays the triggered alerts with a brief description. For
more information about configuring predefined advanced alerts or creating new
advanced alerts, see Using Orion Advanced AlertsCore on page1.

As you add new alerts to the system, they are listed with a number of predefined
alerts in the Configure Alerts window.
Note: If you are configuring a basic alert for objects monitored by an additional
polling engine, configure the basic alert using the Basic Alert Manager on your
primary SolarWinds server, as indicated in the following procedure. If there are
multiple polling engines in your environment, the Basic Alert Manager will give
102

you the opportunity to select the engine that is monitoring the devices to which
you want the basic alert to apply.
To open the Configure Alerts window:
1. Click Start> All Programs> SolarWinds Orion> Alerting, Reporting,
and Mapping> Basic Alert Manager.
2. If you are prompted to select a polling engine because there are multiple polling engines in your environment, click the polling engine that is
monitoring the devices on which you want to alert, and then click Select
Polling Engine.
3. Click Configure Alerts.
The following options are available in the Configure Alerts window:
l
To set the status of an alert as active or inactive, simply check or uncheck

the target alert. Alerts can be activated or deactivated on an individual
basis.
To add a new alert, click New Alert. For more information, see Creating a
New Basic Alert on page104.
To copy an alert, check the alert to copy, and then click Copy Alert.
Note: This option is useful for quickly creating multiple very similar alerts For
more information, see Configuring Basic Alert Copies on page109.
l
To modify the properties of an existing alert, select the alert to modify, and
then click Edit Alert. For more information, see Editing the Name of an
Existing Basic Alert on page104.
To remove an alert from the list in the Configure Alerts window, select the
alert to delete, and then click Delete Alert.
Note: If you only want to temporarily disable an alert without deleting it, simply
uncheck it in the Configure Alerts window.
l
To test the configuration of selected alerts, click Test Alerts. For more
information, see Testing a Basic Alert on page108.
To temporarily disable your alert configuration, check Temporarily Disable all Actions for All Alerts to disable configured actions for all alerts.
Each alert will still be recorded in the log and displayed in the Alerts window, but alert actions will not occur. This feature is particularly useful when
working on a known network issue where additional alert actions are only
an annoyance.
NPM allows you to set alerts for a broad range of network conditions. The
following procedures present the steps to create, configure, and edit basic alerts.
103
Creating a New Basic Alert

The following steps enable a new basic alert.
To create a new basic alert;
Polling Engine.
4. Click New Alert.
5. Enter the name of your new alert in the Name of Alert field.
6. Check Enable this Alert.
Editing the Name of an Existing Basic Alert

The name of a basic alert may be changed using the following procedure.
To change the name of a basic alert:
Polling Engine.
4. Check the alert you want to edit.
5. Click Edit Alert.
6. Click the General tab.
7. Enter the new name of your alert in the Name of Alert field.
8. Select Enable this Alert.
9. If you are finished configuring your alert, click OK.
Selecting the Monitored Property of a Basic Alert

Use the following steps to select the monitored network property of a basic alert.
To select the monitored property of a basic alert:
104

Polling Engine.
4. Check your alert, and then click Edit Alert.
1.Click the Property to Monitor tab, and then select the new network property
you want to monitor.
Note: For most properties a description is displayed at the bottom of the window
upon selection. The system only allows you to select one property per alert
action, replacing the previous selection with each new selection, so you can click
on each property and view its description without needing to deselect it later.

Select the monitored network objects of a basic alert with the following procedure.
To select the monitored network objects of a basic alert:
Polling Engine.
4. Check your alert.
6. Click the Monitored Network Objects tab.
7. Check the network objects to which you want to apply your alert.
Note: By default, all objects are selected. Individually uncheck the objects
that you do not want to monitor for this alert, or use the Clear All and
Select All buttons as appropriate.
Setting the Alert Trigger of a Basic Alert

Set the alert trigger of a basic alert with the following procedure.
To set the alert trigger of a basic alert:
105

Polling Engine.
5. Click the Alert Trigger tab, and then follow the on-screen instructions to
set alert trigger and reset conditions.
Note: When an alert is triggered, the specified actions result. The actions
will not be repeated until the reset condition has first been satisfied.
Setting the Time of Day for a Basic Alert

Set the time of day for a basic alert with the following procedure.
To set the time of day of a basic alert:
Polling Engine.
5. Click the Time of Day tab.
6. Enter the time period you want your alert to monitor. Your alerts will only
trigger if your trigger condition is met within the time period entered.
7. Select the days on which you want your alert to monitor your network. Your
alerts will only trigger if your trigger condition is met on the days selected.
Setting the Alert Suppression for a Basic Alert

Set the alert suppression of a basic alert with the following procedure.
To set the alert suppression of a basic alert:
106

Polling Engine.
5. Click Alert Suppression, and then select one of the following options:
l Do not configure Alert Suppression for this Alert if there is no condition
under which your alert should be suppressed.
l Suppress this Alert if ANY of the selected Suppressions are Active if
there are any conditions under which your alert should be suppressed.
Suppress this Alert only if ALL of the selected suppressions are Active if
you only want to suppress your copied alert in the event that a number of
conditions are all met.
6. If you selected to enable either ANY or ALL alert suppressions, the following procedure configures your alert suppressions:
a. Click Add.
b. Click Property to Monitor.
c. Select a property that is relevant to your suppression.
d. Click Network Object.
e. Select the network objects that should be monitored for your suppression property.
f. Click Suppression Trigger.
g. Select condition states for the selected network object and property
that will suppress your initial alert.
h. Select the suppressions that should be applied to your alert.
Note: You may edit or delete suppressions as needed by selecting
suppressions and clicking Edit or Delete, respectively. For more
information, see See "Basic Alert Engine Suppression Examples"
on page 408 on page1.

Select the actions of a basic alert with the following procedure.
To select the actions of a basic alert:
107

Polling Engine.
4. Check the alert to which you are adding an action, and then click Edit
Alert.
5. Click Actions.
6. Click Add Alert Action to select the actions that you want to occur in the
event of an alert.
7. Follow the given instructions to configure each action. For more information about adding alert actions, see Adding Basic Alert Actions on
page114.
Note: You may edit or delete actions as needed by selecting actions and
clicking Edit Alert Action or Delete Selected Action, respectively.
8. If you are finished configuring your basic alert, click OK.
Testing a Basic Alert

Basic alert actions may be tested before activation to ensure proper configuration.
The following procedure presents the steps to test a basic alert.
To test a basic alert:
Polling Engine.
4. Choose the network node that your alert references.
5. If you are alerting on an interface, click Alert on Network Interface, and
then choose the interface that your alert references on your selected network node.
6. If you are alerting on a volume, click Alert on Volume, and then choose
the volume that your alert references on your selected network node.
7. Choose the alert that you want to test from the Select an Alert to test fire
drop down menu.
8. Click Test Alert Trigger to start test.
Note: Click Test Alert Reset upon completion of test to reset all triggers.
9. If there are errors, click View Alert Error Log to review the log.
108

10. If you are done viewing errors and you want to clear the error log, click
Clear Alert Error Log.
11. Repeat the preceding procedure for each alert that you want to test.
12. If you are done testing alerts, click Done.

You may need to enable multiple basic alerts with similar criteria or alert actions.
Use the Copy Alert function of the Basic Alert Manager to configure multiple
similar alerts that differ in only one or a few characteristics.
To copy a basic alert:
1.Click Start> All Programs> SolarWinds Orion> Alerting, Reporting, and
Mapping> Basic Alert Manager.
2.If you are prompted to select a polling engine because there are multiple
polling engines in your environment, click the polling engine that is monitoring
the devices on which you want to alert, and then click Select Polling Engine.
3.Click Configure Alerts.
4.Check the alert that you want to copy, and then click Copy Alert.
5.Click General.
6.Enter the name of your alert copy in the Name of Alert field.
7.Check Enable this Alert.
Changing the Name of a Copied Alert

The name of a copied alert may be changed using the following procedure.
To change the name of a copied alert:
Polling Engine.
4. Check the alert that you want to rename, and then click Edit Alert.
5. Click General, and then enter the new name of your alert copy in the
Name of Alert field.
109

7. If you are finished configuring your copied alert, click OK.
Changing the Monitored Property of a Copied Alert

Change the monitored property of a copied alert with the following procedure.
To change the monitored property of a copied alert:
Polling Engine.
3. Click Configure Alerts, and then check the copied alert to change.
4. Click Edit Alert, and then click Property to Monitor.
5. Check the new network property that you want to monitor.
Note: For most properties a description is displayed at the bottom of the
window upon selection. The system only allows you to select one property
per Alert action, replacing the previous selection with each new selection,
so you can click on each property and view its description without needing
to deselect it later.
Changing Network Objects Monitored by a Copied Alert

Change the monitored network objects of a copied alert with the following
procedure.
To change the monitored network objects of a copied alert:
Polling Engine.
4. Check the copied alert to change, and then click Edit Alert.
5. Click Monitored Network Objects, and then check the network objects to
which you want to apply your copied alert.
Note: By default, all objects are selected. Individually uncheck the objects
110

you do not wish to monitor for this alert, or use the Clear All and Select All
buttons as appropriate.

Change the alert trigger of a copied alert with the following procedure.
To change the alert trigger of a copied alert:
Polling Engine.
5. Click Alert Trigger, and then follow the on-screen instructions to set alert
trigger and reset conditions.
Note: When an alert is triggered, the specified actions result. The actions
will not be repeated until the reset condition has first been satisfied.
Changing the Time of Day of a Copied Alert

Change the time of day of a copied alert with the following procedure.
To change the time of day of a copied alert:
Polling Engine.
3. Click Configure Alerts, and then check the copied alert to change.
4. Click Edit Alert, and then click Time of Day.
5. Enter the time period when you want your copied alert to monitor your network.
Note: Your alerts will only trigger if your trigger condition is met within the
time period entered.
111

6. Select the days that you want your copied alert to monitor your network.
Note: Your alerts will only trigger if your trigger condition is met on the
days selected.
Changing the Alert Suppression of a Copied Alert

Change the alert suppression of a copied alert with the following procedure.
To change the alert suppression of a copied alert:
Polling Engine.
4. Check the copied alert to change.
6. Click Alert Suppression, and then select one of the following options:
l Do not configure Alert Suppression for the Alert if there is no condition
under which your alert should be suppressed.
l Suppress this Alert if ANY of the selected Suppressions are Active if
there are any conditions under which your alert should be suppressed.
Suppress this Alert only if ALL of the selected suppressions are Active if
you only want to suppress your copied alert in the event that a number of
conditions are all met.
7. If you selected to enable either ANY or ALL alert suppressions, the following procedure configures your alert suppressions:
a. Click Add
b. Click the Property to Monitor tab, and then select a property that is relevant to your suppression.
c. Click the Network Object tab to select the network objects that should
be monitored for your suppression property.
d. Click the Suppression Trigger tab to select condition states for the
selected network object and property that will suppress your initial alert.
e. Select the suppressions that should be applied to your alert.
Note: Edit or delete suppressions as needed by selecting suppressions and clicking Edit or Delete, respectively. For more inform-
112

ation, see See "Basic Alert Engine Suppression Examples" on page
408 on page1.

Change the actions of a copied alert with the following procedure.
To change the actions of a copied alert:
Polling Engine.
5. Click Actions, and then click Add Alert Action to select the actions you
want to occur in the event of an alert.
6. Follow the given instructions to configure each action.
Note: You may edit or delete actions as needed by selecting actions and
clicking Edit Alert Action or Delete Selected Action, respectively.
Deleting a Basic Alert

When you no longer want to maintain a specific basic alert, use the following
procedure to delete it.
To delete a basic alert:
Polling Engine.
4. Check the alert that you want to delete, and then click Delete Alert.
Deactivating a Basic Alert

Use the following procedure to deactivate any basic alert.
113

To deactivate a basic alert:
Polling Engine.
3. Click Configure Alerts, and then clear the box for the alert to deactivate.
Adding Basic Alert Actions

Orion NPM provides a variety of actions to signal alert conditions on your
network. These alert actions are available for both basic and advanced alerts,
and the following procedure assigns actions to defined alert conditions. For more
information about advanced alerts and the actions available with advanced alerts,
see Creating and Configuring Advanced Alerts on page1.
To add a basic alert action:
Polling Engine.
4. Check the alert to trigger the action, and then click Edit Alert.
5. Click Actions, and then select the action you want to edit.
6. Click Add Alert Action, and then click the action to add to your chosen
alert.
For more information about basic alert actions, see Available Basic Alert Actions
on page114.
Available Basic Alert Actions

The following sections detail the configuration of each action type available for
basic alerts.
l
l
l
l

Playing a Sound
114

l
l
l
l
l
l
l
l
l
l

For more information about advanced alerts and the actions available with
advanced alerts, see Creating and Configuring Advanced Alerts on page1.

The following procedure configures an e-mail/page action for a basic alert.
Note: Confirm that the polling engine you have configured to trigger your alert has
access to your SMTP server.
To configure an email/page action for a basic alert:
1. Click Send an E-Mail / Page, and then click OK.
2. On the E-mail/Pager Addresses tab, complete the To, CC, BCC, Name,
and Reply Address fields.
Notes:
l You must provide at least one email address in the To field. When entering
multiple addresses in a field, separate addresses with a comma.
Some pager systems require a valid reply address to complete the page.
3. On the SMTP Server tab, type the Hostname or IP Address of your
SMTP Server and the designated SMTP Port Number.
Note: The SMTP server hostname or IP address field is required. You cannot send an email/page alert without identifying the SMTP server.
4. If your SMTP server requires authentication, check This SMTP Server
requires Authentication.
5. On the Trigger Message tab, type the Subject and Message of your alert
trigger email/page.
Notes:
l Messaging is suppressed if both Subject and Message fields are empty.
A default subject and message are provided that use variables. For more
information about variables, see Basic Alert Engine Variables on page399. For
115

example messages that use variables, see Example Messages Using Variables
on page1.
6. If you want to provide a message when the alert resets, open the Reset
Message tab, and then enter the Subject and Message of your
email/page.
Notes:
on page1.
7. If you are finished configuring your email/page alert action, click OK.
Playing a Sound
Orion NPM can be configured to play a sound upon alert trigger or reset. The
following procedure configures a sound to play for a basic alert.
Note: Due to restrictions on Windows service applications, this action is not
available to Orion installations on either Windows 7 or Windows Server 2008 and
higher. For more information, see the SolarWinds Knowledge base article,
"Enabling audible alerts (Play a Sound action) on Windows Server 2008".
To configure a play sound action for a basic alert:
1. Click Play a Sound.
2. Click OK.
3. Specify a sound file for the alert trigger by doing either of the following in
the Sound file to play when Alert is triggered field:
l Type the complete directory path and file name
Click Browse () to navigate your folder structure and select a file
4. Specify a sound file for the alert reset by doing either of the following in the
Sound file to play when Alert is reset field:
l Type the complete directory path and file name
Click Browse () to navigate your folder structure and select a file.
5. Click the musical note to the right of either text field to test the specified file.
6. If you are finished configuring your play sound alert action, click OK.
116

Orion NPM can be configured to log alerts to a designated file. The following
procedure logs a basic alert to a designated file.
To configure an alert log file for a basic alert:
1. Click Log the Alert to a file, and then click OK.
2. Specify a log file by doing either of the following in the Alert Log File field:
l Type the complete path and name of the target file
Click Browse () to browse your server and select the target file
Note: If the file specified does not exist, it will be created with the first alert.
3. If you want to change the default message to log when the alert is
triggered, type your message in the Message to log when the Alert is
triggered field.
Notes:
on page1.
4. If you want to change the default message to log when the alert is
reset, type your message in the Message to log when the Alert is reset
field.
Notes:
on page1.
5. If you are finished configuring your alert log file, click OK.

You may specify that an alert be logged to the Windows Event Log either on the
NPM server or on a remote server, as follows.
To configure basic alert logging to the Windows Event Log:
1. Click Windows Event Log, and then click OK.
2. Open the Target Machine tab.
117

3. If you want your alert to write to the Windows Event Log on your
Orion NPM server, select Log Message in Event Log on NetPerfMon
Server.
4. If you want your alert to write to the Windows Event Log on a remote
server, select Log Message in Event Log on Remote Server, and then
provide the Remote Server Name or IP Address.
5. On the Trigger Message tab, enter the message you want the triggered
alert to log to the Windows Event Log on the designated server.
Note: Messaging is suppressed if both Subject and Message fields are
empty. A default subject and message are provided that use variables. For
more, see Basic Alert Engine Variables on page399. For example messages, see Example Messages Using Variables on page1.
6. On the Reset Message tab, enter the message you want the reset alert to
log to the Windows Event Log on the designated server.
Notes:
on page1.
7. When you finish configuring your Windows Event Log action, click
OK.

Orion NPM can log received alerts to the Syslog of a designated machine. The
following procedure configures a basic alert to send a Syslog message.
To configure a basic alert to send a Syslog message:
1. Click Send a Syslog message, and then click OK.
2. On the Target Machine tab, type the Target Hostname or IP Address of
the Syslog server to which you want to send messages on alert trigger and
reset.
3. On the Trigger Message tab, select the Severity of your Syslog message.
For more information, see Syslog Message Priorities on page1.
4. If you want to change the default message that is sent to Syslog when
an alert is triggered, enter your message in the Syslog field.
Notes:
118

on page1.
5. If you want to change the default message that is sent to Syslog when
an alert is reset, enter your message in the Syslog field.
Notes:
on page1.

If you want to execute a program when a specific network event occurs, use the
Edit Execute Program Action window to specify the complete path and name of
the executable that should be started when the specified alert is triggered or reset,
as shown in the following procedure.
To configure a basic alert to execute an external program:
1. Click Execute an external program, and then click OK.
2. Specify a program to execute when the alert is triggered either by typing
the complete path and name of the target file into the Program to execute
when Alert is Triggered field or by clicking Browse () to browse your
folder structure and select the target file.
3. Specify a program to execute when the alert is reset either by typing the
complete path and name of the target file into the Program to execute
when Alert is Reset field or by clicking Browse () to browse your folder
structure and select the target file.
4. If you are finished configuring your external program execution
action, click OK.

If you want to execute a Visual Basic (VB) script when a network event occurs
use the Execute VB Script action to specify the name and complete path of the file
that shall be executed when the specified alert is triggered or reset.
To configure a basic alert to execute a Visual basic (VB) script:
119

1. Click Execute an external VB Script, and then click OK.
2. Select an available VB Script Interpreter.
3. Specify your VB script to execute either by typing the complete path and
name of the script into the VB Script to execute when Alert is triggered
field or by clicking Browse () to browse your server and select the script.
4. Specify a VB script to execute when the alert is reset either by typing the
complete path and name of the target file into the Program to execute
when Alert is reset field or by clicking Browse () to browse your folder
structure and select the script.
5. If you are finished configuring your VB script execution action, click
OK.

The following procedure will configures an email message to send a web page to
a specified address upon alert.
To configure a web page e-mail action for a basic alert:
1. Click E-mail a Web Page, and then click OK.
2. On the E-Mail/Pager Addresses tab, complete the To, CC, BCC, Name,
and Reply Address fields.
Notes:
l
You must provide at least one address in the To field. When multiple
addresses are in a field, separate addresses with a comma.
Some pager systems require a valid reply address to complete the page.
3. On the SMTP Server tab, type the Hostname or IP Address of your
SMTP Server and the designated SMTP Port Number.
Note: The SMTP server hostname or IP address field is required. You cannot email a web page without identifying the SMTP server.
4. If you want to enable Secure Sockets Layer security, check Enable
SSL.
6. On the Trigger URL tab, provide the Subject and Web Page URL of your
alert trigger web page email.
Notes:
120

on page1.
7. If you want to preview the URL you have provided, click Preview URL.
8. If the web server of the URL you want to email on alert trigger requires
user access authentication, provide both the Web Server UserID and
the Web Server Password in the Optional Web Server Authentication
area.
9. If you want to provide a URL on alert reset, open the Reset URL tab,
and then type the Subject and Web Page URL of your alert reset email.
Notes:
information, see Basic Alert Engine Variables on page399. For examples, see
Example Messages Using Variables on page1.
10. If you want to preview the URL you have provided, click Preview URL.
11. If the web server of the URL you want to email on alert reset requires
user access authentication, provide both the Web Server UserID and
the Web Server Password in the Optional Web Server Authentication
area.
12. If you are finished configuring your email URL alert action, click OK.

You may specify that a basic alert changes a custom property value when the
basic alert is either triggered or reset. This is useful when you have limited the
users of an Orion Web Console view based on a property value, thus showing the
users a moving depiction of the devices they need to monitor. You may also
populate the property with a custom URL for each issue needing monitoring. For
more information about account limitations, see Setting Account Limitations. For
more information about custom properties, see "Creating a Custom Property".
The following procedure configures a change in a custom property upon the
trigger or reset of a basic alert.
Note: The Change a Custom Property Value action does not work for custom
properties with restricted values.
To change a custom property when a basic alert triggers or resets:
1. Click Change Custom Property, and then click OK.
2. Enter the custom property name in the Property field.
Note: You must enter the name of the property exactly as it appears in the
121

table header of the Edit view within the Custom Property Editor application. For more information, see "Creating a Custom Property".
3. If you want to change the above property upon an alert trigger, enter
the new value into the Value to set when Alert is Triggered field.
4. If you want to change the above property upon an alert reset, enter the
new value into the Value to set when Alert is Reset field.
5. If you are finished configuring your custom property change action,
click OK.

You may specify a phrase that will be spoken upon alert trigger and a separate
phrase for the alert reset. Orion NPM uses Microsoft Speech Synthesis Engine
version 5.0, as included with Windows 2003 and XP Professional. If you have
Orion NPM maintenance, you may also install and use other text-to-speech
engines by visiting the SolarWinds website. The following procedure configures
text-to-speech output for a basic alert trigger or reset.
Note: Due to restrictions on Windows service applications, the Text to Speech
action is not available to Orion installations on either Windows 7 or Windows
Server 2008 and higher.
To configure text-to-speech output for a basic alert trigger or reset:
1. Click Text to Speech output, and then click OK.
2. On the General tab, select an available speech engine, and then position
the Speed, Pitch, and Volume sliders as appropriate.
3. Open the Trigger Phrase tab.
Note: A default triggered alert phrase is provided that uses variables. You
may change this text if you wish. For more information on the use of variables, see NPM Variables and Examples on page388.
4. If you want a new phrase spoken upon an alert trigger, enter the new
phrase into the Phrase to speak when Alert is Triggered field.
5. If you want to test your texttospeech message, click Speak.
Note: If it is available with your speech engine, click Pronunciation Dictionary to adjust word pronunciation as you prefer.
6. Open the Reset Phrase tab.
7. If you want a phrase to be spoken upon an alert reset, enter the new
phrase into the Phrase to speak when Alert is Reset field.
8. If you want to test your texttospeech message, click Speak.
Note: If it is available with your speech engine, click Pronunciation Dictionary to adjust word pronunciation as you prefer.
9. If you are finished configuring your text-to-speech action, click OK.
122

Alerts can be configured to display a pop-up Windows Net Message either on a
specific computer or on all computers in a selected domain or workgroup. The
following steps configure Windows Net messaging for triggered or reset alerts.
Note: Windows Server 2008 does not support Windows Net Messaging, so this
action is not available to NPM installations on Windows Server 2008.
To configure Orion NPM to send a Windows Net message upon alert:
1. Click Send a Windows Net Message, and then click OK.
2. On the Target Machine or Domain tab, enter the Computer Name or IP
Address of the machine where you want to send a Windows Net message
upon an alert trigger or reset.
3. If you want to send the message to all computers in the domain or
workgroup of your target computer, check Send to all Computers in
the Domain or Workgroup.
4. If you want to change the default Windows Net message that is sent
when an alert is triggered, click the Trigger Message tab, and then enter
your message in the Message to send when Alert is Triggered text box.
Note: You may use variables in this message. For more information on the
use of variables, see NPM Variables and Examples on page388.
5. If you want to send a Windows Net message when an alert is reset,
click the Reset Message tab, and then enter your message in the Message
to send when Alert is Reset text box.
6. If you are finished configuring this action, click OK.

Alerts can be configured to dial either a paging or an SMS service when an alert
triggers. Currently, NPM basic alerts integrate with NotePager Pro from
NotePage, Inc. For more information about configuring NotePager Pro with NPM,
see http://www.notepage.net/solar-winds/orion.htm.

The following steps configure an alert to send an SNMP trap on trigger or reset.
To configure Orion NPM to send an SNMP trap upon alert:
123

1. Click Send an SNMP Trap, and then click OK.
2. On the Target Machines tab, enter the hostname or IP address of the destination Orion NPM server for your SNMP traps into the Add Trap Destination field, and then click Add.
Note: Repeat this step for each additional destination machine.
3. If there is a machine in the Send SNMP Traps to the following
machines field that you no longer want as an SNMP trap destination,
select the machine from the list, and then click Delete to remove it.
4. Enter the SNMP Community String for your network in the designated
field.
5. On the Trap to Send on Trigger tab, select the type of trap to send on alert
trigger from the Trap Template list.
Note: Some trap templates may use an alert message, so a default message that uses variables is provided for the triggered alert message. You
may change this text, if you want, but it is important that you understand the
use of variables beforehand. For more information about using variables,
see NPM Variables and Examples on page388.
6. If you want to change the default message sent with the SNMP trap
when the selected alert is triggered, enter the text of your new SNMP
trap message in the Some Trap templates may use an Alert Message
text box.
7. On the Trap to Send on Reset tab, select the type of trap to send on alert
reset from the Trap Template list.
8. If you want to send an SNMP trap when an alert is reset, enter the text
of your SNMP trap message in the Some Trap templates may use an
Alert Message text box.
9. If you are finished with the configuration of Orion NPM to send SNMP
traps, click OK.

Orion NPM can be configured to communicate alerts using HTTP GET or POST
functions. As an example, a URL may be used as an interface into a trouble ticket
system, and, by correctly formatting the GET function, new trouble tickets may be
created automatically. The following procedure configures Orion NPM to use GET
or POST HTTP functions to communicate alert information.
To configure Orion NPM to use GET or POST URL functions with alerts:
1. Click Get or Post a URL to a Web Server, and then click OK.
2. Select either Use HTTP GET or Use HTTP POST to set the function that
you want to use to communicate alert information.
124
Copying Basic Alerts to an Additional Polling Engine

3. Enter the URL that you want to GET or POST, as designated, upon an alert
trigger in the URL when Alert is Triggered field.
4. Enter the URL that you want to GET or POST, as designated, upon an alert
reset in the URL when Alert is Reset field.
5. If you are finished with the configuration of Orion NPM to use HTTP
GET or POST URL functions, click OK.
Copying Basic Alerts to an Additional Polling

Engine
Basic alert definitions are keyed to polling engines. If you want to apply a basic
alert to nodes you have moved to an Additional Polling Engine, you must make a
copy of each basic alert definition and then key it to the new Additional Polling
Engine, as indicated in the following procedure. For more information about
Additional Polling Engines, see Using Additional Polling Engines on page147.
To copy basic alerts to an Additional Polling Engine:
1. Using an administrative account, log on to your primary NPM server.
3. Click the polling engine that is monitoring the devices on which you are
alerting, and then click Select Polling Engine.
5. For each alert you want to apply to devices monitored by your Additional
Polling Engine, complete the following steps:
Note: Repeat this procedure for each alert you want to copy.
a. Check the alert to copy, and then click Copy Alert.
b. On the General tab, edit the alert name in the Name of Alert field to
indicate that it is an Additional Polling Engine alert.
c. On the Monitored Network Objects tab, confirm that the copied alert is
applied to the appropriate network devices.
d. Configure other tabs as appropriate, and then click Done. For more
information, see Configuring Basic Alerts on page102.
6. Log in to the web console as a user with node management rights.
7. Click Settings in the top right corner of the web console.
8. In the Details grouping, click Polling Engines.
9. Record the Engine ID for your Additional Polling Engine.
10. Open SQL Server Management Studio on the SQL Server hosting your
SolarWinds database.
11. Log in using an account with administrative privileges.
125

12. In the left pane, click + to expand both your SQL Server and your
Note: SolarWindsOrion is the default name of the SolarWinds database.
13. Click + to expand Tables.
14. Right-click Alerts in the expanded list of SolarWinds database tables, and
then click Script Table as> UPDATE To> New Query Editor Window.
15. Clear the query field, and then type the following query into the cleared
field:
Note: EngineID is the value found in the Monitor Polling Engines utility
above. APE is a suggested string to identify alerts on the Additional
Polling Engine.
UPDATE [SolarWinds Orion].[dbo].[Alerts]SET [EngineID]='EngineID', [AlertName]
='APE ' + [AlertName]WHERE [AlertName] Like Copy%
16. Click Execute.

The Alerts view in the Orion Web Console displays all currently triggered alerts
listed in the form of a table. For more information about viewing alerts in the web
console, see Viewing Alerts in the Orion Web Console on page280.
126

Orion Network Atlas is a powerful tool for creating custom maps and network
diagrams. The maps created in Orion Network Atlas enable users to view a
graphical depiction of their network in the Orion Web Console. You can also use
the maps to create network documentation, which can then be printed and
exported as needed.
Map objects may include monitored Orion NPM nodes, interfaces, and volumes;
SAM applications and components; nested maps; and network links. The
numerous presentation options for your network maps include the following:
l
A large set of predefined background colors, textures, and images is available for you to use in your maps. You can also provide your own custom
background graphics.
Real-time weather or natural disaster maps may be projected directly onto
your network maps using linked web graphics as a background.
The shape, size, color, and style of map links may be customized to illustrate the status or the relative bandwidth of associated objects.
Map objects may be presented in a unique set of graphical styles to portray
network status
Maps may be nested to selectively reveal increasing levels of map detail,
and the status of nested map child objects may be bubbled up to the parent
map
Orion Network Atlas is also fully compatible with all network maps created with
Orion Map Maker in earlier versions of NPM. For more information about Orion
Network Atlas, see the SolarWinds Orion Network Atlas Administrator Guide at
http://www.solarwinds.com/support/orionModules/modulesDoc.aspx.
127
128
Chapter 10: Monitoring MIBs with

Using Universal Device Pollers, Orion Network Performance Monitor has the
ability to monitor more than just network status, availability, bandwidth, and errors.
With Orion Universal Device Pollers, you can monitor virtually any statistic that
your network devices can record, including:
l
l
l
l
l
Interface traffic
CPU temperature
Addressing errors
UPS battery status
Current connections to a website
Universal Device Pollers collect both realtime and historical data associated with
object IDs maintained in the extensive SolarWinds MIB database.and provided by
SolarWinds users. As a result, Universal Device Pollers can retrieve data for
nearly any conceivable network metric. Additionally, with Universal Device Poller
transforms, you can mathematically manipulate the results of multiple pollers to
create your own custom network performance metrics. All network information
collected from Universal Device Pollers is accessible within the web console.
Warning: Universal Device Pollers do not collect information from either Orion
Failover Engine or Hot Standby Engines. If an Orion NPM server fails, data
collection stops for any Universal Device Pollers on that server. Any Universal
Device Pollers polling that server will be unable to report any information for the
failed NPM server, even if it fails-over to an Orion Failover Engine. For more
information, see Orion Failover and Disaster Recovery on page442.
Note: Universal Device Pollers are tied directly to the individual Orion NPM
polling engines on which they are hosted. As a result, all Universal Device
Pollers assigned to a monitored node that is moved from one Orion NPM polling
engine to another must be moved to the new polling engine as well.
The following sections provide instructions for defining and using Universal
Device Pollers:
l
l

129
l
l
l
l
l
l
l
l


SolarWinds maintains a MIB database that serves as a repository for the OIDs
used to monitor a wide variety of network devices. This MIB database is updated
regularly, and, due to its size, it is not included in the initial NPM installation
package.If you are either updating your existing MIB database or using the
Universal Device Poller for the first time, you will need to download the
SolarWinds MIB database as detailed in the following procedure.
Note: You may need to restart the Universal Device Poller after installing the new
MIB database.
To download and install the SolarWinds MIB database:
1. If you are responding to a prompt to download and install the
SolarWinds MIB database, click Yes.
Note: This prompt is typically only encountered by first-time users.
2. If you are downloading an update to your existing SolarWinds MIB
database, complete the following procedure:
a. Use your SolarWinds Customer ID and Password, to log in to the Customer Portal (http://www.solarwinds.com/customerportal/).
b. On the left, under Helpful Links, click Orion MIB Database.
3. If you are using Internet Explorer and it prompts you to add the
SolarWinds downloads site http://solarwinds.s3.amazonaws.com, complete
the following steps to start the MIB database download:
a. Click Add on the warning window.
b. Click Add on the Trusted Sites window.
c. Click Close, and then refresh your browser.
4. Click Save on the File Download window.
5. Navigate to an appropriate file location, and then click Save.
6. After the download completes, extract MIBs.zip to a temporary location.
130

7. Open the folder to which you extracted MIBs.zip, and then copy MIBs.cfg to
the SolarWinds folder in either of the following locations on your default
install volume, depending on your NPM server operating system:
l \Documents and Settings\All Users\Application Data\ on Windows Server 2003
and XP.
\Documents and Settings\All Users\ProgramData\
on Windows Server 2008 and Vista.

Universal Device Poller critical and warning thresholds are configured in the web
console. The following procedure configures Universal Device Poller thresholds.
To configure Universal Device Poller thresholds:
1. Log in to the Orion Web Console using an account with administrative privileges.
3. Click Custom Poller Thresholds in the Settinngs grouping.
4. Either click a listed custom poller, or search for a custom poller using the
search box on the left.
5. Confirm the Poller Value Type.
Note: The Poller Value Type was set when you initially configured the
Universal Device Poller, and it indicates how strings returned by the polled
device are interpreted.
6. Build conditions to define both Warning and Critical Thresholds, as follows:
a. Select whether All child conditions must be satisfied (AND) or if
only At least one child condition must be satisfied (OR).
b. Select an appropriate comparison relation and then provide a
threshold value on which the comparison is based.
c. Click + to add additional conditions, as required, to define your
poller threshold.
7. After configuring all thresholds, click Submit.

The following procedure creates and defines a new Universal Device Poller.
To create and define a new universal device poller:
1. Click Start> All Programs> SolarWinds Orion > Network Performance
Monitor> Universal Device Poller.
131

2. If you are prompted to download and install the MIB database, click
Yes, and then download and install the MIB database. For more information, see Downloading the SolarWinds MIB Database on page130.
3. Click File> New Universal Device Poller.
4. If you know the OID of the object you want to poll, type it in the OID
field.
5. If you do not know the OID of the object you want to poll and you want
to browse available MIB object definitions, complete the following steps:
a. Click Browse MIB Tree.
b. Expand the MIB tree in the left pane to navigate until you locate the
object you want to poll.
c. Select the object you want to poll, and then click Select.
Note: Details describing the selected poller display in the right pane.
6. If you do not know the OID of the object you want to poll and you want
to search available MIB object definitions, complete the following procedure:
a. Click Browse MIB Tree.
b. Click Search MIBs in the top right corner of the Browse MIBs window.
c. Select a criterion to Search By (Name, Description keyword, or OID).
d. Provide search strings in the Search field, and then click Search.
e. Select the object you want to poll, and then click Select.
Note: The OID Details below the Search fields include a description of
the corresponding object and indicate the MIB you are currently searching. If an existing OID exactly matches the OID string provided, details
for the matching OID display below the Search field. Searching by
name or description returns all OIDs with names or descriptions,
respectively, containing the provided search string.
7. If you want to test the validity of a selected object for a specific node,
select an appropriate test node in the right pane, and then click Test.
Note: A green check icon indicates that the selected object was successfully polled for the selected node, returning the indicated value. A yellow warning icon indicates that the test poll was not successful for the
reason indicated.
8. If you tested your poller and it failed, check the following:
l Are you using the correct community string for the node that is being polled
for the test? For more information about providing community strings, see
Monitoring Devices in the Web Console on page1.
l Does the selected device support the polled MIB/OID? Refer to device documentation to confirm the MIBs supported by your device.
132

Can your NPM server access the device? Ping the device or use a SolarWinds
Toolset application, such as IP Network Browser, to confirm that the device is
responding to both ICMP and SNMP requests.
9. Click Select when you have located the OID you need.
10. If necessary, edit the provided Name and Description for your poller.
Notes:
l
A poller name is required. Orion NPM uses this name to refer to your poller
throughout the Orion Web Console. Names are recorded without spaces,
so any spaces that are included in the name are removed
The description is optional, but it may be helpful in identifying the type of

information collected by your poller.
11. If you want to change the advanced poller option defaults, click + next
to Show Advanced Options, and then complete the following steps:
a. Select the MIB Value Type for the selected poller.
Note: Depending on the type of poller, the poller returns statistics
formatted as a Rate, a Counter, or a Raw Value.
b. If you selected Rate or Counter as your MIB Value Type, provide an
appropriate Unit and Time Frame.
c. If you selected Raw Value as your MIB Value Type, select the appropriate Format in which the polled raw values should appear.
Note: If you are using the Enumerated format, click Map Values to
provide strings corresponding to the values returned by the poller.
d. Select the SNMP Get Type appropriate for the object you are
polling,and then select Node or Interface, as appropriate for the polled
object.
e. Confirm that the correct type of object is selected for the selected poller
to poll (Node or Interface).
f. If you want to designate a specific Polling Interval for the selected
poller, enter the desired interval, in minutes, between 1 and 600.
Notes:
l
By default, the node or interface statistics polling interval is used as the

Polling Interval for node and interface Universal Device Pollers,
respectively. For more information about polling intervals, see "Configuring Polling Engine Settings" on page237.
All pollers defined as elements in a poller transform must use the same
Polling Interval. If you are using the selected Universal Device Poller
133
12.
13.
14.
15.
16.
17.
l
as one element in a poller transform, confirm that it is using the same

Polling Interval as all other pollers in the transform.
If you want to maintain historical data collected by your poller, select
Yes for the Keep Historical Data option.
Note: SolarWinds recommends that you keep historical data to take full
advantage of the data display features present in Orion NPM. Select Yes if
you want to display collected poller data in charts and gauges within the
Orion Web Console.
If you want the poller to begin polling immediately upon configuration,
confirm that Enabled is selected as the poller Status.
Note: If you select Disabled, the poller will not collect statistics until you
enable the poller.
In the Group field, either select an existing group or provide a new group
name to aid in organizing your pollers, and then click Next.
Click + to expand the node tree as necessary, and then check all the
nodes to which you want to apply your new poller.
Note: Available groups are listed in the Group By: field. Select a group to
selectively limit number of nodes listed in the node tree.
If you want to see the current results for your poller on the nodes you
have checked, click Test.
Note: A green check icon indicates that the poller successfully polled the
selected node, returning the indicated value. A yellow warning icon indicates that the test poll was not successful for the reason indicated.
If you tested your poller and it failed, check the following:
Are you using the correct community string for the node that is being polled
Does the device support the MIB/OID that is being polled? Refer to the documentation supplied by the device vendor to confirm the MIBs supported
by your device.
Can you access the device from the Orion Network Performance Monitor server?
Ping the device to see if it responds or use a SolarWinds Toolset application,
such as IP Network Browser, to confirm that the device is responding to both
ICMP and SNMP requests.
18. Click Next.
19. If you want to display poller results in Orion Web Console views, confirm that Yes is selected, and then, for each available NPM view, check the
types of poller results resources, if any, that you want to display.
134

Note: Click Preview to see how your poller resource will display in the
selected Orion Web Console view.
20. If you only want to display the poller results resource in the event that
the poller returns valid results, check Do not show this poller if it is
not assigned.
21. Click Finish.

In addition to the Universal Device Pollers that you create, NPM is packaged with
a few predefined example pollers. To use any of these pollers you need to assign
the poller to a network device, and then enable the poller.
Note: For more information about creating your own Universal Device Pollers,
see Creating Universal Device Pollers on page131.
To enable and assign a poller to nodes or interfaces:
2. Click File> Assign Pollers.
3. Click +, as necessary, to expand the poller tree, and then check the pollers
you want to assign.
Notes:
l
By default, NPM provides two poller groups: Example and Default Group.
The Example group contains all predefined NPM pollers, and Default
Group is the group that contains all user-defined Universal Device Pollers
if they are not assigned to any other group.
Checking a poller group automatically checks all pollers in the group. If
you do not want to assign a specific poller in a checked group, click + next
to the poller group name, and then uncheck the specific pollers that you do
not want to assign.
If you need to assign multiple pollers either to a single node or to a group of

nodes, check all the pollers you want to apply on this view. These pollers are
assigned to nodes in the next step.
4. After you have checked all the pollers you want to assign, click Next.
5. Click + to expand the node tree down to the interface level, if necessary,
and then check the elements to which you want to apply the selected
pollers.
Notes:
135

Available groups are listed in the Group By: field. Select a group to selectively limit the node tree.
l Interfaces are not displayed unless you are assigning an interface poller.
l When assigning an interface poller, checking a node automatically assigns
the selected poller to all interfaces on the checked node. If you do not want
to apply the poller to a specific interface on any parent node, click + next to
the parent node, and then uncheck the specific interfaces to which the
poller should not be assigned.
6. If you want to see the current results of the selected pollers on the
nodes and interfaces you have checked, click Test.
Note: A green check icon indicates that the poller successfully polled the
selected node, returning the indicated value. A yellow warning icon indicates that the test poll was not successful for the reason indicated.
l Does the device support the MIB/OID that is being polled? Refer to the documentation supplied by the device vendor to confirm the MIBs supported
by your device.
l
Ping the device to see if it responds or use a SolarWinds Toolset application,
such as IP Network Browser, to confirm that the device is responding to both
ICMP and SNMP requests.
8. Once you have completed your poller assignments, click Finish.

By default, as soon as a poller is assigned, it collects statistics on the selected
elements to which it is assigned. If you want to suspend data collection for a
poller without deleting it, complete the following procedure to disable the poller.
Note: To disable multiple pollers, repeat the following procedure for each poller
you want to disable.
To temporarily disable a Universal Device Poller:
136

2. In the All Defined Pollers pane of the Orion Universal Device Poller window, click +, as necessary, to expand the poller tree, and then click the
poller you want to disable.
3. Confirm you have selected the poller you want to disable by viewing the
poller properties in the main Orion Universal Device Poller window. Click
Show all Properties in the lower left of the main window to show more
details, if necessary.
4. Click Edit Properties in the top right of the main window.
5. Set Status to Disabled, and then click Finish.

Existing pollers are easily duplicated in Orion NPM. The following procedure
provides the required steps to duplicate an existing poller.
To duplicate an existing poller in Orion NPM:
poller you want to duplicate.
3. Confirm that you have selected the poller you want to duplicate by viewing
the poller properties in the main Orion Universal Device Poller window.
4. Click Show all Properties in the lower left of the main window to show
more details, if necessary.
5. Right-click the name of the poller you want to duplicate, and then select
Duplicate Poller.
6. Change the Name of the duplicate poller, and then edit the definition of the
duplicate poller, as necessary, in the same way that you would create a
new Universal Device Poller. For more information about creating a Universal Device Poller, see Creating Universal Device Pollers on page131.

Orion NPM provides the ability to import custom pollers both from previous Orion
NPM versions and from Universal Device Pollers. Though you cannot import
MIBs directly into the SolarWinds MIB Database, the import mechanism does
allow you to import the association between a MIB and a Universal Device Poller.
The poller can then be associated with a device in your environment. Use the
following procedure to import a Universal Device Poller.
137

To import a Universal Device Poller:
2. Click File> Import Universal Device Pollers.
3. For each poller you want to import, complete the following steps:
a. Click Open, and then navigate to the location of the poller to import.
b. Select the poller to import, and then click Open.
4. Select the pollers to import from the list on the left, and then click Import.
5. If you want to remove a selected poller from the list of pollers to
import, click the poller to remove, and then click Remove.
Notes:
l
To select multiple pollers, hold down SHIFT or CTRL, and then click the
pollers you want.
To collapse all folders and see just the group names, hold down SHIFT, and
thenclick - next to any of the group names.
6. Click OK.
7. If you want the imported poller to begin polling immediately upon
assigning network devices, complete the following steps:
a. Select your new, imported poller in the All Defined Pollers pane on the
left of the Orion Universal Device Poller window.
b. Click Edit Properties.
c. Confirm that the poller Status is Enabled, and then click Finish.
8. If you do not want the poller to begin polling immediately upon assigning network devices, complete the following steps:
a. Select your new, imported poller in the All Defined Pollers pane on the
left of the Orion Universal Device Poller window.
b. Click Edit Properties.
c. Select Disabled as the poller Status, and then click Finish.
Note: If Disabled, the poller will not collect data until you enable the
poller.
9. Assign nodes or interfaces to the imported poller. For more information,
see Assigning Pollers to Nodes or Interfaces on page135.
As soon as the imported poller has been enabled and assigned to appropriate
network devices, the poller begins collecting statistics. To view these statistics,
log in to the Orion Network Performance Monitor Web Console and browse to a
node or interface that was just assigned to the poller. For more information, see
Viewing Universal Device Poller Statistics on page144.
138

Orion NPM provides the ability to export Universal Device Pollers you have
created using the following procedure.
To export a Universal Device Poller:
2. Click File> Export Universal Device Pollers.
3. In the Pollers pane on the left, click +, as necessary, to expand the poller
tree, and then select the pollers you want to export.
Note: Selecting a group name selects all pollers in the group, and multiple
pollers may be selected using Shift+click and Ctrl+Click.
4. If you have selected all the pollers you want to export, click Export.
5. If you want to remove a selected poller from the list of pollers to
export, click the poller to remove, and then click Remove.
Note: Selecting a group name selects all pollers in the group, and multiple
pollers may be selected using Shift+click and Ctrl+Click.
6. Click Save.
7. Navigate to the location where you want to export the selected pollers,
provide a File name, and then click Save.

Just as the default pollers that are packaged with your SolarWinds NPM have
defined warning and critical thresholds, you are able to set the warning and
critical thresholds for your configured Universal Device Pollers.
To set Universal Device Poller thresholds:
1. Log into the Orion Web Console using an account with administrative privileges.
2. Click Settings in the top right corner.
3. In the Settings grouping, click Custom Poller Thresholds.
4. In the left pane, click the poller for which you want to configure thresholds.
5. Confirm that the selected Poller Value Type is correct (Text or Number).
6. Configure both Warning and Critical Thresholds as follows:
a. Select whether All child conditions must be satisfied (AND) or if
only At least one child condition must be satisfied (OR).
b. Select an appropriate relation, and then provide a value.
c. Add additional conditions, including additional condition blocks, as
required, to define your poller threshold.
139

7. If you want to configure additional poller thresholds, click Save and
Continue, and then configure additional poller thresholds, as above.
8. Click Submit.

Often, the results provided by a MIB poller are more easily understood after they
have been manipulated with a simple mathematical calculation. For example,
though a poller may return temperature values in Celsius, it may be easier to work
with the poller results if they are presented in Fahrenheit. The following sections
detail both currently available poller transformations and the creation of new
poller transformations.
Available Poller Transformations

Orion NPM provides a number of predefined transformation functions that may be
applied to one or more pollers to generate mathematically manipulated poller
results. The following table lists transformation functions that are currently
available with the Universal Device Poller in Orion NPM:
Poller Transformation
Average
Minimum
Maximum
Definition
Provides an average of the results of multiple pollers
Provides the minimum of multiple poller results
Provides the maximum of multiple poller results
Truncates a polled value to a designated number of
decimal places; e.g. Truncate({HiPrecision},4) truncates the
Truncate
result of the poller named HiPrecision to four decimal
places.
Provides an average of the column values in a polled
ColumnAverage
table
ColumnMinimum
Gives the minimum of a column of values in a polled table
ColumnMaximum
Gives the maximum of a column of values in a polled table
ColumnSum
Provides the sum of a column of values in a polled table
Temperature >
Provides the Fahrenheit equivalent of a poller result
CelsiustoFahrenheit originally presented in Celsius
Temperature >
Provides the Celsius equivalent of a poller result originally
FahrenheittoCelsius presented in Fahrenheit
Provides the number of Kilobytes equivalent to a poller
XtoKilobyte
result originally presented in Bytes
140

Provides the number of Megabytes equivalent to a poller
Provides the number of Gigabytes equivalent to a poller
XtoGigabyte
Provides the number of Terabyte s equivalent to a poller
XtoTerabyte
Provides the number of Megabytes equivalent to a poller
KilobytetoMegabyte
result originally presented in Kilobytes
KilobytetoGigabyte
Provides the number of Terabytes equivalent to a poller
KilobytetoTerabyte
MegabytetoGigabyte
result originally presented in Megabytes
MegabytetoTerabyte
result originally presented in Megabytes
GigabytetoTerabyte
result originally presented in Gigabytes
Using C# regular expression syntax, retrieves the first
match for a provided poller result in a string poller result,
e.g. parse((?<TempTell>)\d+), Current temperature is 55) returns
Parse
55.
XtoMegabyte
For more information about C# regular expressions, see

"Regular Expression Pattern Matching" on page422.

The following procedure provides the steps required to develop powerful poller
transformations with Universal Device Pollers.
To transform poller results:
2. Click File> Transform Results.
3. Click Next on the page of example poller transformations.
4. Type a transformation Name, and then provide an optional Description.
Notes:
141
A transformation name is required. Orion NPM uses this name to refer to

your defined poller transformation throughout the Orion Web Console.
Names are recorded without spaces, so any included spaces in the name
are removed.
The description is optional, but it may be helpful in identifying the type of

information generated by your poller transformation.
5. If you want to maintain historical data generated by your poller transformation, select Yes for the Keep Historical Data option.
Note: SolarWinds recommends that you keep historical data to take full
advantage of the data display features present in Orion NPM. Select Yes if
you want to display transformed poller data in charts and gauges within the
Orion Web Console.
6. If you want your poller transformation to begin calculating transformed results immediately upon configuration, confirm that Enabled is
selected as the poller transformation Status.
Note: If you select Disabled, the poller will not transform poller statistics
until you enable the poller transformation.
7. In the Group field, either select an existing group or provide a new group
name to aid in organizing your poller transformations.
8. Click Next.
9. Provide the mathematical definition of your poller transformation in the Formula field, as shown in the following steps:
a. Click Add Function, and then select the function you want to apply to
one or more pollers.
b. Click within the function parentheses.
c. Click Add Poller, and then select a poller to transform.
Notes:
l Repeat for each additional poller to add to the transformation formula.
l Separate pollers with commas, as shown in the following example that
averages the results of three pollers:
avg({poller1},{poller2},{poller3})
l
Standard mathematical operations, as shown in the following example, are

also valid as formulas:
{poller1}+{poller2}
l
Mathematical constants e and are also available, as E() and PI(), respectively.
Poller transformation formulas are also nestable, as shown in the following example
that returns the average of two poller comparisons:
142

avg(min({poller1},{poller2}),max({poller3},{poller4}))
10. If you want to test the validity of a selected poller transformation formula for a specific node, use the available criteria to select a device to
test, and then click Test.
Note: Test results for each poller in the formula display with the result of
the defined poller transformation.
11. If you tested your poller transformation and it failed, check the following:
l Is your transformation formula syntactically correct? Ensure that all braces
and parentheses are balanced, that there are no unnecessary spaces, and
that all pollers return the same type of values.
l Does the device support the polled MIB/OID? Refer to documentation supplied by the device vendor to confirm supported MIBs for your device.
Ping the device to see if it responds or use a SolarWinds Toolset application such
as IP Network Browser to confirm that the device is responding to both ICMP and
SNMP requests.
12. Click Next.
13. Click + to expand the node tree down to the interface level, if necessary,
and then check all the monitored devices to which you want to apply your
defined poller transformation.
Notes:
l
Available groups are listed in the Group By: field. Select a group to selectively limit the node tree.
Interfaces are not displayed unless your poller transformation operates on
a defined interface poller.
When assigning an interface poller transformation, checking a node automatically

assigns the selected transformation to all interfaces on the checked node. If you
do not want to apply the poller transformation to a specific interface on any parent
node, click + next to the parent node, and then uncheck the specific interfaces to
which the transformation should not be assigned.
14. If you want to see the current results of the selected pollers on the
nodes and interfaces you have checked, click Test.
Notes:
143
A green check icon indicates a valid poller transformation, and the transformation result is displayed.
A yellow warning icon indicates that the poller transformation was not successful
for the reason indicated.
l Is your transformation formula syntactically correct? Ensure that all braces
and parentheses are balanced, that there are no unnecessary spaces, and
that all pollers return the same type of values.
l Does the device support the polled MIB/OID? Refer to documentation supplied by the device vendor to confirm supported MIBs for your device.
Ping the device to see if it responds or use a SolarWinds Toolset application such
as IP Network Browser to confirm that the device is responding to both ICMP and
SNMP requests.
16. Click Next.
17. If you want to display poller results in Orion Web Console views, confirm that Yes is selected, and then, for each available view, check the types
of poller results resources, if any, that you want to display.
selected web console view.
18. If you only want to display the poller results resource in the event that
the poller transformation returns valid results, check Do not show this
poller if it is not assigned.
19. Click Finish.

Once you have configured and enabled a Universal Device Poller, you can view
the statistics that it records on any view within the Orion Web Console. The
following procedure includes poller resources in Orion Web Console views.
To add poller resources to web console views:
144

poller you want to add as a web console resource.
3. Confirm that you have selected the poller you want to duplicate by viewing
the poller properties in the main Orion Universal Device Poller window.
4. Right-click the poller to add as a resource, and then click Web Display.
5. Confirm that Yes is selected, and then, for each available NPM view,
check the types of poller resources that you want to display.
selected Orion Web Console view.
6. If you only want to display the poller resource when the poller returns
valid results, check Do not show this poller if it is not assigned.
7. Click Finish.

Alerts for Universal Device Pollers are configured using the Advanced Alert
Manager. For more information, see Using Orion Advanced AlertsCore on
page1.
Notes:
l
In some cases, the table name may be required for variables used in
Universal Device Poller alerts, as in ${CustomPollers.Description}.
When creating a new alert for a Universal Device Poller, on the Trigger
Condition tab, change the alert type to Node Poller or Interface Poller, as
appropriate.
Mapping Universal Device Pollers with Network

Atlas
With Network Atlas version 1.11, it is possible to include Universal Device Pollers
as objects on custom maps. Universal Device Pollers are added to Network Atlas
maps in the same way that nodes, interfaces, and other monitored network are
included. For more information, see the section "Adding Map Objects" in the
SolarWinds Orion Network Atlas Administrator Guide.
145
146
Chapter 11: Using Additional Polling

Engines
Because larger networks can quickly become too extensive for a single Orion
NPM polling engine to adequately monitor, Additional Polling Engines are
available to increase the monitoring capacity of your Orion NPM installation by
enabling multiple monitoring engines that work in parallel across your network.
Note: In NPM versions 10.2 and higher, Additional Polling Engines no longer
require that the primary NPM polling engine in your environment is also running
to support data collection for Universal Device Pollers, and EnergyWise, ESX
Server, and wireless devices.
Additional Polling Engine Guidelines

The following table provides guidance for SolarWinds NPM installations that use
scalability engines to expand monitoring capacity.
Network Performance Monitor (NPM) Scalability Engine Guidelines
Yes. Up to three total polling engines may be installed on a
single server (i.e. one primary NPM polling engine with one or
Stackable
two additional polling engines or three additional polling engines
Pollers
on the same server).
Available?
Note: A stack requires only 1 IP address for any number of APEs
Yes, for NPM versions 10.4 and higher
Poller
Note: Poller remotability is a feature enabling the local storage,
Remotability using MSMQ, of up to ~1 GB of polled data per poller in case the
Available?
connection between the polling engine and the database is
temporarily lost.
~12k elements at standard polling frequencies:
Primary Poller
Limits
l
l
l
Node and interface up/down: 2 minutes/poll

Node statistics: 10 minutes/poll
Interface statistics: 9 minutes/poll
25-50 concurrent Orion Web Console users
147

SNMP Traps: ~500 messages per second (~1.8 million
messages/hr)
Syslog: 700-1k messages/second (2.5 - 3.6 million messages/hr)
Note: If you are monitoring more than ~100,000 elements,
consider using SolarWinds Enterprise Operations Console.
One polling engine for every ~12k elements
Scalability
Options
Maximum of 100k elements per primary SolarWinds NPM server

(i.e. 1 NPM server + 9 APEs). For more information about
licensing, see "How is SolarWinds NPM licensed?"
Minimal monitoring traffic is sent between the primary NPM
WAN and/or
server and any APEs that are connected over a WAN. Most
Bandwidth
traffic related to monitoring is between an APE and the
Considerations
Additional Polling Engine System Requirements

System requirements for an Additional Polling Engine are the same as system
requirements for a primary NPM polling engine. For more information about
system requirements, see Orion NPM Requirements on page38.
Notes:
l
NPM is not able to add nodes to an Additional Polling Engine if DNS cannot resolve the name of the server hosting the Additional Polling Engine.
SNMP access must be allowed to all SolarWinds polling engines. For
more information, see the installation instructions in the Administrator
Guide for your SolarWinds product.
Basic alerts are configured and managed from your primary SolarWinds
server If there are multiple polling engines in your environment, the Basic
Alert Manager on your primary SolarWinds server will give you the opportunity to select the engine that is monitoring the devices to which you want
the basic alert to apply. For more information, see Configuring Basic
Alerts on page102.
Upgrading an Additional Polling Engine

Upgrading an Additional Polling Engine follows the same steps required to
upgrade a primary NPM polling engine. For more information, see Upgrading
Orion Network Performance Monitor on page1.
148

Notes:
l
The most recent installer is available in your SolarWinds Customer Portal

within the Orion_Additional_Polling_Engine_version.zip archive.
Confirm that you have upgraded your main Orion server before you
upgrade your Additional Polling Engine.
If you are upgrading an Additional Polling Engine that is currently in service, the Additional Polling Engine will shutdown temporarily with the result that you may lose some polling data. SolarWinds recommends that you
perform any Additional Polling Engine upgrades during off-peak hours.

Configuration typically occurs after an initial installation, but it may also be
required when a non-standard configuration change is made or when a module is
added to your Additional Polling Engine. In general, the steps to configure an
Additional Polling Engine are the same as those required to configure a primary
NPM polling engine, with the following additional considerations:
l
If you are using custom properties to monitor your network, you must copy
related schema (*.schema) and configuration (*.config and *.cfg) files from
your primary Orion server to the server hosting your Additional Polling
Engine.
Note: By default, *.schema files are located on your primary SolarWinds server in
C:\Program Files\SolarWinds\Orion\Schemas\; *.config and *.cfg files are located in
C:\Program Files\SolarWinds\Orion\.
l
If you are using any basic alerts to monitor your network, you must make
copies of all basic alert definitions in your Orion database, and then assign
the copies to your Additional Polling Engine. For more information, see
Copying Basic Alerts to an Additional Polling Engine on page1.
If you want to use any Orion modules for monitoring or managing any
devices polled with an Additional Polling Engine, you must install the Additional Polling Engine version of the module you want to use on the server
hosting your Additional Polliing Engine.
For more information about optimizing an additional polling engine configuration,

see See "Managing Orion Polling EnginesCore" on page 237 on page1.
Note: During configuration, the Additional Polling Engine will shutdown
temporarily with the result that, if you are actively polling, you may lose some
data. SolarWinds recommends configuring polling engines during off-peak hours.
149
Changing Polling Engine Node Assignments

Reassigning nodes to new polling engines may be required in the following
situations:
l
l
l
Moving or renaming your NPM server

Deleting an existing polling engine
Merging two or more Orion servers
If these or any other conditions present the need for reassignment, complete the
following procedure to reassign nodes to a new polling engine.
To change a polling engine node assignment:
2. Click Settings in the top right of the web console, and then click Manage
Nodes in the Node & Group Management grouping.
3. Locate the node to manage using either of the following methods:
l Use the search tool above the node list to search your Orion database for
the device you want to manage.
Select an appropriate Group by criteria, and then click the appropriate group
including the node to manage.
4. Check the node for which you want to change the polling engine.
5. Click More Actions, and then click Change Polling Engine.
Note: The current number of Assigned Objects is listed for each available
polling engine. This number is updated with each automatic polling engine
synchronization. Updates to the Assigned Objects count can only be completed for polling engines that are operationally up.
6. Select the new polling engine, and then click Change polling engine.
150
Chapter 12: Managing the Web

ConsoleCore
The Orion Web Console is an integral part of the Orion family of products that can
be configured for viewing from virtually any computer connected to the Internet.
You can also customize the web console for multiple users and store individually
customized views as user profiles. Administrator functions are accessed by
clicking Settings in the top right of all Orion Web Console views.
Logging in for the First Time as an Administrator

When you launch the Orion Web Console, you are presented with a login view
requiring both a User Name and a Password.
To log in to the Orion Web Console:
1. Launch the Orion Web Console using either of the following methods:
l Click Start> All Programs> SolarWinds Orion> Orion Web Console.
l Or launch a browser on your Orion server and enter http:// ip_address or
http://hostname, where ip_address is the IP address of your Orion host
server, or where hostname is the domain name of your Orion server.
2. Enter Admin as your User Name, and then click Login.
Notes: Until you set a password, you can log in as Admin with no Password. After your first login, you may want to change the Admin password.
For more information, see Changing an Account Password on page1.
Windows Authentication with Active Directory

As of Orion Core version 2010.2, the Orion Web Console can authenticate Active
Directory users and users who are members of Active Directory security groups.
To enable Active Directory Windows authentication to the web console:
1. Install and configure Active Directory on your local network.
Notes:
l For more information about installing Active Directory on Windows Server
2003, see the Microsoft Support article, How To Create an Active Directory Server in Windows Server 2003.
151

For more information about Active Directory on Windows Server 2008, see the
Microsoft TechNet article, Active Directory Services.
2. If you want to enable automatic login for web console accounts using Windows Authentication, configure the Orion Web Console as shown in the following steps:
a. Click Start> All Programs> SolarWinds Orion> Configuration and
Auto-Discovery> Configuration Wizard.
b. Check Website, and then click Next.
c. After providing the appropriate IP Address, Port, and Website Root
Directory, select Yes Enable automatic login using Windows
Authentication.
d. Click Next, and then complete the Configuration Wizard.
3. Log in to the web console using the appropriate domain and user, providing Domain\Username or Username@Domain as the web console User name.
Using the Web Console Notification Bar

Below the web console menu bar, the Orion notification bar provides
informational messages related to the following NPM features:
l
If you have configured the Orion Web Console to check for product
updates, an announcement displays in the notification bar when an
update, including any upgrade, service pack, or hotfix, to NPM or any other
Orion modules you currently have installed becomes available. For more
information about Orion Product Updates, see Product Updates on
page1.
If you have configured the Orion Web Console to store blog posts, new and
unread posts to the Orion Product Team Blog are announced in the notification bar. For more information about the Orion Product Team Blog, see
Product Updates on page1.
If you have currently configured a scheduled discovery, results display in
the notification bar when the discovery completes. For more information
about Scheduled Discovery, see Discovering and Adding Network
Devices on page1.
If you are currently using NPM to monitor any VMware ESX or ESXi Servers, the notification bar can display messages communicating the number
of ESX nodes found during any discovery, and, if any discovered ESX
nodes require credentials, the notification bar tells you. For more information about managing ESX Servers, see Virtualization on page1..
152

For more information about any displayed notification bar message, click More
Details and a web console view relevant to the displayed message opens.
To delete a posted message, either click Dismiss Message next to the displayed
message, or properly address the situation mentioned in the posted notification.
To remove the notification bar from your web console, click Close (X) at the right
end of the notification bar.

The Orion Web Console offers two primary methods of navigation: top-level web
console tabs and view-level breadcrumbs. The following sections describe how
these different navigation methods are configured and used:
l
l

In the case of a basic NPM installation, the Orion Web Console displays the
following tabs:
Home
The Home tab provides a menu bar of links to views aiding you in general
network management and monitoring. Information, like events and Top 10
lists, and technologies, like alerts, used to generate the views linked from
the Home menu are generally available to all Orion modules. By default, the
Orion Summary Home view displays when you click Home from any view
in the web console.
Applications (SAM)
If you are viewing the Orion Web Console on a server on which SolarWinds
Server & Application Monitor (SAM) is also installed, the Applications tab
opens a menu of default views for some of the many different types of
applications SAM can monitor. If SAM is installed without Orion NPM, the
SAM Summary Home view displays by default when you click Home from
any web console view.
Network (Orion NPM)
The Network tab opens a menu bar of links to views and technologies, like
EnergyWise, wireless network and interface monitoring, that are specific to
the features provided by NPM. If Orion NPM is installed, the NPM Summary
153

Home view displays by default when you click Home from any web console
view.
Configs (Orion NPM and NCM)
If the Orion NCM Integration for Orion NPM is installed, the Configs tab
provides links to default device configuration management views. If Orion
NPM is installed, clicking Home from any web console view displays the
NPM Summary Home view by default.
Virtualization
The Virtualization tab provides access to specific views and resources that
are tailored for monitoring virtual devices. For more information about
virtualization monitoring in Orion, see Virtualization on page1.
The web console provides an additional module-specific tab for each installed
Orion module. These tabs offer access to views and tools specific to the Orion
module added. For more information about additional Orion modules, see
www.solarwinds.com. For more information about customizing menu bars, see
Customizing Web Console Menu Bars on page1.

As you navigate web console views, your location is recorded as a series of links,
or breadcrumbs, to the views you have opened. Each breadcrumb offers the
following navigation options:
l
l
Clicking a breadcrumb opens the corresponding view directly.

Clicking > next to a breadcrumb opens a clickable list of all other views at
the same navigation level in the web console. For example, if you are on a
Node Details view, clicking > displays a list of other monitored nodes.
Note: Only the first 50 monitored nodes, listed in alphanumeric order by IP

address, are displayed.
Customizing Web Console Breadcrumbs
Dropdown breadcrumb lists are customizable, as shown in the following
steps.To customize the items in a breadcrumb dropdown:
1. Click > at an appropriate level in a breadcrumb to open the dropdown.
2. Click Customize this list.
3. Select a criterion from the menu, and then click Submit.
Note: All items in the customized list will be identical for the selected criterion.
Disabling Web Console Breadcrumbs
154

To ensure access is appropriately restricted for accountlimited users, you
may want to disable breadcrumbs, as indicated in the following procedure.
To disable web console breadcrumb navigation:
1. Log on to your Orion server using an account with administrative access.
2. Open web.config (default location C:\Inetpub\SolarWinds\) for editing.
3. In the <appsettings> section, locate the following setting:
<add key=DisableBreadCrumbs value=false/>
4. Change false to true, as follows:
<add key=DisableBreadCrumbs value=true/>
5. Save web.config.
Note: If you run the Configuration Wizard after editing this setting, your
changes may be overwritten.

The following sections describe the primary administrative functions performed by
an Orion Web Console administrator.
l
l
l
l


Orion Web Console administrators may change user account passwords at any
time, as shown in the following procedure.
Note: In environments where security is a priority, SolarWinds recommends
against providing a view where users may change their own web console
account passwords.
To change an account password:
1. Log in to the web console as an administrator.
3. Click Manage Accounts in the Accounts grouping of the Orion Website
Administration page.
4. Select the user account with the password you want to change, and then
click Change Password.
155

5. Complete the New Password and Confirm Password fields, and then click
Change Password.
6. Click Continue when the password is successfully changed.

If you are logged in to the web console as an administrator, clicking Settings in
the top right corner of the web console.displays the Orion Website Administration
page, presenting a variety of tools to control the appearance and delivery of
information to Orion Web Console users. The following options are available on
the Orion Website Administration page.
Before you can start monitoring your network you must designate the network
objects you want your Orion installation to monitor. The Getting Started with Orion
grouping provides direct links to the following discovery-related views so you can
quickly and easily start monitoring your network:
l
Discovery Central provides a centralized overview of the types and number of network objects you are monitoring with your Orion installation. For
more information, see Discovery Central on page1.
Clicking Network Sonar Discovery opens the Network Sonar Discovery
Wizard. Network Discovery enables you to quickly discover devices across
your entire network for monitoring. For more information, see Network Discovery Using the Network Sonar Wizard on page1.
Clicking Add a Node opens the Add Node Wizard directly. For more
information about adding nodes individually, see Adding Devices for Monitoring in the Web Console on page1.

The Node & Group Management grouping of the Orion Website Administration
page gives you access to the following web console views for managing nodes
and groups:
l
Clicking Manage Nodes displays the Node Management page, where an

Orion Web Console administrator can immediately add, view, and manage
all network objects currently managed or monitored by your Orion installation. For more information, see Monitoring Devices in the Web Console
on page1.
Clicking VMware Settings opens the VMware Settings view, where you
can view both a list of currently monitored VMware ESX Servers and a
156
Accounts
library of the VMware credentials NPM uses to monitor your ESX Servers.
For more information, see Virtualization on page1.
Clicking Manage Dependencies opens the Manage Dependencies view.
Dependencies allow you to formalize dependent relationships between
monitored objects based on network topology or priority to eliminate the
potential for duplicated or redundant polling and alerting. For more information, see Click Submit. on page1.
Clicking Manage Groups opens the Manage Groups view. To a greater
degree than previously available with custom properties, groups enable
you to logically organize your monitored network objects. For more information, see Managing Groups on page1.
Accounts
The Accounts grouping of the Orion Website Administration page gives a web
console administrator access to the following web console configuration pages:
l
The Manage Accounts link provides web console administrators access

to set and change account passwords, set user rights and access, and configure the web console experience for all users. For more information about
managing accounts, see Managing Web AccountsCore on page1.
Clicking Account List opens the Orion Website Accounts view, providing
an immediate overview of web console user account settings. You may
use this view to make changes to multiple accounts simultaneously and
immediately by clicking to check or clear options. Clicking an Account
user name opens the Account Manager for the selected account. For more
information about managing accounts, see Managing Web Accounts
Core on page1.
Customize
The Customize grouping of the Orion Website Administration page offers options
to customize the navigation and appearance of your Orion Web Console on the
following pages:
l
The Customize Menu Bars page allows an Orion Web Console administrator to configure the menu bars seen by individual users. For more
information, see Customizing Web Console Menu Bars on page1.
The Color Scheme page gives a web console administrator the ability to
select a default color scheme for resource title bars. The color scheme
selection takes effect immediately throughout the web console. For more
information, see Changing the Web Console Color Scheme on page1.
157
The External Websites page enables an Orion Web Console administrator to designate any external website as an Orion Web Console view,
appearing in the Views toolbar. For more information, see Creating and
Editing External Website Views on page1.
Manage Alerts
The Manage Alerts grouping provides a link to the Manage Advanced Alerts view,
where you can edit, enable, disable, and delete advanced alerts directly from the
web console. For more information about manage advanced alerts in the web
console, see Creating and Managing Alerts on page1.
Product Updates
The Product Updates grouping provides links to web console views offering
up-to-date information about using and upgrading NPM.
l
The Available Product Updates view allows you to configure regular

checks for NPM updates that can include version upgrades and service
packs.
The Orion Product Team Blog offers regular posts from members of the
Orion product team to help you take full advantage of features provided by
NPM and its modules.
Views
The Views grouping of the Orion Website Administration page gives an Orion
Web Console administrator access to the following view configuration pages:
l
The Manage Views page enables a web console administrator to add,

edit, copy, or remove individual web console views. For more information
about managing Orion Web Console views, see Customizing Views on
page1.
Clicking Add New View opens the Add New View page, where you can
define new web console views.
The Views by Device Type page gives an Orion Web Console administrator the ability to designate default views for network devices. For more
information, see Views by Device Type on page1.
Settings
The Settings grouping of the Orion Website Administration page gives an Orion
Web Console administrator access to the following settings configuration pages:
158
Details
Note: If you currently have any Orion modules installed, links to module settings
pages display in the Settings grouping. For more information about configuring
Orion module settings, see the Administrator Guide for your Orion module.
l
Web Console Settings allow an Orion Web Console administrator to customize the function and appearance of both the Orion Web Console and
the charts that are displayed as resources in Orion Web Console views.
For more information about configuring Orion Web Console and Chart Settings, see Orion Web Console and Chart Settings on page1.
Polling Settings define the configuration of polling intervals, timeouts, statistics calculations, and database retention settings for your NPM polling
engine. For more information about configuring Orion Polling Settings, see
Orion Polling Settings on page1.
The Orion Thresholds page opens the Orion General Thresholds page,
where NPM threshold settings are configured. For more information, see
Orion Network Performance Monitor Thresholds on page1.
Details
The Details grouping of the Orion Website Administration page provides links to
the following pages containing information about your Orion installation:
Database Details
This is an information-only page that displays details about the SQL Server
database currently used by your Orion installation. In addition to current
version information and configuration settings for both your Orion server and
your database server, this page displays the total number of monitored
objects in the Orion database.
Polling Engines
Orion supports the implementation of multiple distributed polling engines.
Each engine can monitor and collect data from different parts of your
network. This page shows the status and selected configuration information
for each currently operational polling engine.
Orion Core Details
This is an information-only page that displays details about your installation
of the common components and resources that all Orion products share,
including information about your Orion server, monitored object counts, and
the version numbers of the executables and DLLs required by any and all
installed Orion products.
159

License Details
This is an information-only page that displays details about the licenses of
all Orion products you currently have installed. This page also shows the
version numbers of the SolarWinds products you are running and the
versions of associated DLLs. For more information about managing your
license, see Maintaining Licenses with License Manager on page1.

In the interest of security, sensitive network information, such as community
strings, logins, and passwords, is not viewable in the web console. However, if
you have secured your network, you may check Allow Secure Data On Web
(advanced) in the Calculations & Thresholds area of the Orion Polling Settings
page to allow the passage of community strings through the web console.
Note: This setting does not affect the display of custom reports that you export to
the web.

The Counter Rollover setting configures NPM to properly handle counter
rollovers. NPM is capable of handling either 32-bit or 64-bit counters, but, by
default, NPM assumes counters are 32-bit. 32-bit counters have a maximum
value of 232, or 4,294,967,296, and 64-bit counters, if they are supported by your
network devices, have a maximum value of 264, or 18,446,744,073,709,551,616.
Note: The 32-bit counters option is designated as Method 1 in the Counter
Rollover field on the Orion Polling Settings page.
The following procedure designates the type of counter-hanlding used by NPM.
To designate the type of counter-handling used by NPM:
2. Click Settings in the top right of the web console.
3. Click Polling Settings in the Settings grouping of the Orion Website
4. If you are using 64bit counters, select Method 2 in the Counter Rollover
field in the Calculations & Thresholds area.
Notes:
l
If Method 2 is selected, NPM will intentionally skip a poll if a polled

value is less than the previous polled value to permit counting to 264.
160
Orion Thresholds
Orion fully supports the use of 64-bit counters; however, these 64-bit counters can
exhibit erratic behavior in some implementations. If you notice peculiar results
when using these counters, disable the use of 64-bit counters for the problem
device and contact the device manufacturer.
5. If you are using of 32bit counters, select Method 1 in the Counter
Rollover field in the Calculations & Thresholds area.
Note: If Method 1 is selected, when a rollover is detected, the time
between polls is calculated as (232 Last Polled Value) + Current Polled
Value.
Orion Thresholds
Many of the resources available in the Orion Web Console are capable of
displaying error and warning conditions for the devices on your network. Errors
and warnings display in the Orion Web Console. NPM uses the values provided
on the thresholds pages to determine when and how to display errors and
warnings in the Orion Web Console.
The following sections provide more information about threshold types and
configuration:
l
l


The following device conditions may be configured as Orion General Thresholds:
Average CPU Load
Monitored network devices experiencing average CPU loads higher than
the value set for the High Level display in High CPU Load reports and
network devices experiencing an average CPU load higher than the value
set for the Warning Level, but lower than the value set for the High Level,
display as red in High CPU Load reports and resources. Gauges for these
Disk Usage
Monitored network devices experiencing a disk usage higher than the value
set for the High Level display as bold red in Disk Usage reports and
resources. Monitored network devices experiencing a disk usage higher
161

than the value set for the Warning Level, but lower than the value set for the
High Level, display as red in High Disk Usage reports and resources.
Percent Memory Used
Monitored network devices experiencing a percent memory usage higher
than the value set for the Error Level display in High Percent Utilization
reports and resources. Gauges for these devices also display as bold red.
Monitored network devices experiencing a percent memory usage higher
than the value set for the Warning Level, but lower than the value set for the
Error Level, display in High Percent Utilization reports and resources.
Gauges for these devices also display as red.
Percent Packet Loss
Monitored network devices experiencing a percent packet loss higher than
the value set for the Error Level display in High Percent Loss reports and
network devices experiencing a percent packet loss higher than the value
set for the Warning Level, but lower than the value set for the Error Level,
display in High Percent Loss reports and resources. Gauges for these
NPM calculates percent packet loss using ICMP ping requests made on the
Default Poll Interval. Orion pings monitored devices and records the results
of the ten most recent ping attempts. Percent packet loss is expressed as
the number of failed ping requests, X, divided by the number of ping
requests, 10. For more information about the Default Poll Interval, see
Orion Polling Settings on page1.
For example, if, at a given point in time, the last ten ping requests made of a
selected device resulted in 2 failures and 8 successes, the percent packet
loss for the selected device at the given time is reported as 2/10, or 20%.
Response Time
Monitored devices experiencing response times longer than the value set
for the Error Level display in High Response Time reports and resources.
Gauges for these devices also display as bold red. Devices experiencing
response times longer than the value set for the Warning Level, but shorter
than the value set for the Error Level, also display in High Response Time
reports and resources. Gauges for these devices also display as red.
NPM calculates response time using ICMP ping requests made on the
Default Node Poll Interval. Orion pings monitored devices and records the
162

results of the ten most recent ping attempts. Average Response Time is
expressed as the average response time of these last 10 ping requests. If
NPM does not receive a ping response within the Default Poll Interval, NPM
will attempt to ping the nonresponsive device once every 10 seconds for the
period designated as the Warning Interval. For more information, see Orion
Polling Settings on page1.

The following procedure configures Orion General Thresholds.
To set NPM thresholds:
3. Click Orion Thresholds in the Settings group of the Orion Website Administration page.
Note: For more information about Orion General Thresholds, see Orion
General Threshold Types on page1.
4. Provide appropriate values for Error Level, High Level, or Warning Level
for selected thresholds.
Customizing Views
Orion Web Console views are configurable presentations of network information
that can include maps, charts, summary lists, reports, events, and links to other
resources. Customized views can then be assigned to menu bars.
account passwords.
Creating New Views

You can customize the Orion Web Console for individual users by logging in as
an administrator and creating new views as shown in the following procedure.
account passwords.
To create a new view:
2. Click Manage Views in the Views group, and then click Add.
3. Enter the Name of New View, and then select the Type of View.
Note: The Type of View selection affects how the view is made
163

accessible to users, and your choice may not be changed later. For more
information, see Views by Device Type on page1.
4. Click Submit.
After you have created a new view, the Customize YourView page opens. For
more information, see Editing Views on page1.
Editing Views
The Orion Web Console allows administrators to configure views for individual
users. The following steps are required to configure an existing view.
To edit an existing view:
1.
2.
3.
4.
Click Settings in the top right of the web console.

Click Manage Views in the Views group.
Select the view you want to customize from the list, and then click Edit.
If you want to change the column layout of your view, complete the following steps.
a. Click Edit to the right of the column widths.
b. Select the number of columns under Layout.
c. Provide the width, in pixels, of each column in the appropriate fields.
d. Click Submit.
5. If you want to add a resource, repeat the following steps for each
resource:
Notes:
Resources already in your view will not be checked on this page listing all
web console resources. It is, therefore, possible to pick duplicates of
resources you are already viewing.
l Some resources may require additional configuration. For more information, see Resource Configuration Examples on page1.
l Several options on the Add Resources page are added to the list of
resources for a page, but the actual configuration of a given map, link, or
code is not added until the page is previewed.
a. Click + next to the column in which you want to add a resource.
b. Check all resources you want to add.
Note: Use the Group by: field on the left to limit the resource list or use
the search field at the top to locate specific resources.
c. If you have completed the addition of resources to the selected
view, click Add Selected Resources.
6. If you want to delete a resource from a column, select the resource, and
then click X next to the resource column to delete the selected resource.
l
164

7. If you want to copy a resource in a column, select the resource, and
then click next to the resource column to delete the selected resource.
8. If you want to rearrange the order in which resources appear in your
view, select resources, and then use the arrow keys to rearrange them.
9. If you have finished configuring your view, click Preview.
Note: A preview of your custom web console displays in a new window. A
message may display in the place of some resources if information for the
resource has not been polled yet. For more information, see Resource
Configuration Examples on page1.
10. Close the preview window.
11. If you are satisfied with the configuration of your view, click Done.
Note: For more information about adding a customized view to menu bars
as a custom item, see Customizing Web Console Menu Bars on page1.
For more information about assigning your customized view as the default
view for a user, see Editing User Accounts on page1.

As a security feature, the web console gives administrators the ability to apply
device-based view limitations. The following limitations are defined by default:
Orion Web Console View Limitations
Single Network
Group of Nodes
Node
Node Name Pattern System Name Pattern
Machine Type
Group of Machine Types
Pattern
Hardware
Single Hardware
Manufacturer
Manufacturer
System Location
System Contact Pattern
System Contact
IP Address Pattern
Group of Volumes Device Status

Single Machine
Single Group
Type
Group Name Pattern
System Location Pattern

Single Interface (Orion NPM)
Interface Status (Orion NPM)
Interface Alias Pattern (Orion
NPM)
Group of Interfaces (Orion
NPM)
Interface Name Pattern (Orion
NPM)
Interface Type (Orion NPM)
Group of Groups
The following procedure configures a view limitation.
165

To enable a view limitation:
Views in the Views group of the Orion Website Administration page.
2. Select the view to which you want to add a limitation, and the click Edit.
3. In the View Limitation area of the Customize View page, click Edit.
4. Select the type of view limitation you want to apply, and then click
Continue.
5. Provide or check appropriate strings or options to define the device types
to include or exclude from the selected view, and then click Submit.
Note: The asterisk (*) is a valid wildcard. Pattern limitations restrict views
to devices for which the corresponding fields include the provided string.
Copying Views
When you want to create multiple views based on the same device type, copying
views allows you to create one view, and then use that view as a template to
create other new views. The following steps copy an existing view.
To copy a view:
1.
2.
3.
4.
Click Settings in the top right of the web console.

Click Manage Views in the Views group.
Select the view you want to copy, and then click Copy.
If you want to edit a copied view, follow the procedure in the Editing
Views section on page1.
Deleting Views
The following steps delete an existing view.
To delete an existing view:
1. Click Settings in the top right of the web console, and then cick Manage
Views in the Views grouping of the Orion Website Administration page.
2. Select the view you want to delete, and then click Delete.
Views by Device Type

There are vast differences among network objects and the statistics they report,
but the Orion Web Console can make it easier to view network data by displaying
object details by device type, giving you the ability to have a different view for
each unique type of device you have on your network, including routers, firewalls,
and servers. The following steps assign a view by any available device type.
To assign a view by device type:
166

1. Click Settings in the top right of the web console, and then click Views by
Device Type in the Views group of the Orion Website Administration page.
2. Select available Web Views for the different types of devices that Orion is
currently monitoring or managing on your network.
3. Click Submit.

Several resources that may be selected from the Add Resources page require
additional configuration. Included in this section are examples of these resources
and the steps that are required for their proper configuration.
Selecting a Network Map
Network maps created with Orion Network Atlas can give a quick overview of
your network, right from the main web console view. For more information about
creating maps, see Creating Network Maps on page1.
Note: Clicking the resource title in the title bar menu displays the resource by
itself in a browser window.
The following procedure adds a network map to the Orion Web Console.
To add a network map to the web console:
1. Create a new view or edit an existing view.
Note: For more information, see Customizing Views on page1.
2. Select the view to which you want to add the map, and then click Edit.
3. Click + next to the view column in which you want to display the new map.
4. Click + next to Network Maps, check Network Map, and then click Submit.
5. Click Preview on the Customize YourView page.
6. Click Edit in the Network Map resource title bar.
7. If you do not want to use the default title provided, enter a new Title for
the title bar of the added map.
8. If you want a subtitle, enter a new Subtitle for the added map.
Note: Titles and subtitles may be entered as either text or HTML.
9. Select from the list of available maps.
10. Select the Scale at which you want to display the map.
Note: If you leave the Scale field blank, the map will display at full scale,
based on the size of the column in which the map displays.
11. Click Submit.
167

Displaying a List of Objects on a Network Map
When your web console view includes a network map, it can be helpful to
maintain a list of network objects that appear on the map. The following
procedure enables a resource listing network map objects.
Note: Clicking the resource title displays the resource in a new browser window.
To display a list of network map objects:
2. Select the view to display the list of network map objects, and then click
Edit.
3. Click + next to the view column in which you want to display the new list of
network map objects.
4. Click + next to Network Maps, check List of Objects on Network Map,
and then click Submit.
6. Click Edit in the title bar of the List of Objects on Network Map resource.8
the header of the objects list.
8. If you want a subtitle, enter a new Subtitle for the added objects list.
9. Select from the list of available maps for the objects that you want to populate your list, and then click Submit.
Displaying a Custom List of Maps
The web console allows you to populate a custom view with a list of available
network maps. Each map in your custom list, when clicked, opens in a new
window. The following procedure enables a custom network maps list resource.
Note: Clicking the resource title displays the resource in its own browser window.
To display a custom list of maps:
2. Select the view to which you want to add the custom list of network maps,
and then click Edit.
3. Click + next to the view column in which you want to display the custom list
of network maps.
4. Click + next to Network Maps.
5. Check Custom List of Maps, and then click Submit.
168

6. Click Preview on the Customize YourView page, and then click Edit in the
title bar of the Custom List of Maps resource.
the header of the maps list.
8. If you want a subtitle, enter a new Subtitle for the custom list of maps.
9. Check the maps you want to include in your maps list.
10. Click Submit.
You may want your web console view to display an event summary for a specified
period of time. The following procedure details the steps to include an event
summary in your web console.
To display an event summary:
Note: For more information about creating a new view or editing an existing view, see Customizing Views on page1.
2. Select the view to include the event summary, and then click Edit.
3. Click + next to the view column that will display the event summary.
4. Click + next to Events.
5. Check Event SummaryCustom Time Period, and then click Submit.
7. Click Edit in the title bar of the Event Summary resource.
the header of the event summary.
Note: Titles may be entered as either text or HTML.
9. Select the time period for displaying events from Display Events for the
following Time Period.
10. Click Submit.
Specifying User-Defined Links
The User-Defined Links option may be used to create quick access to external
websites or customized views. URLs of your customized views can be copied
from their preview pages and pasted in a User-Defined Links field. The following
steps enable user-defined links from within your web console.
169

To enable a user-defined links resource:
2. Select the view to which you want to add the user-defined links resource.
3. Click Edit.
4. Click + next to the view column to display the user-defined links resource.
5. Click + next to Miscellaneous.
6. Check User Defined Links.
7. Click Submit.
9. Click Edit in the title bar of the User Defined Links resource.
the links list.
11. If you want a subtitle, enter a new Subtitle for the links list.
12. Enter the following information for each link you want to define:
a. A link Name and the URL of your link.
b. If you want your links to open in a new browser window, check
Open in New Window.
13. Click Submit.
Specifying Custom HTML or Text
In situations where you have static information that you want to provide in the web
console, use the Custom HTML or Text option. The Custom HTML or Text
option may also be used to create quick access to your customized views. The
following procedure will create a static content area within your web console for
displaying text or HTML content.
To specify custom HTML or text:
2. Select the view to include the custom HTML or text, and then click Edit.
3. Click + next to the column to display the custom HTML or text.
4. Click + next to Miscellaneous, and then check Custom HTML or Text.
5. Click Submit.
7. Click Edit in the title bar of the Custom HTML or Text resource.
170

the specified content area.
9. If you want a subtitle, enter a new Subtitle for the specified content area.
10. Enter content as either text or HTML into the Raw HTML field.
11. Click Submit.
The web console is able to incorporate reports that you have created in Orion
Report Writer into any view. The following procedure will take a report that you
have created with Report Writer and include it within a web console view.
To include an Orion report:
2. Select the view to which you want to add the report.
3. Click Edit.
4. Click + next to the view column in which you want to display the report.
5. Click + next to Report Writer.
6. Check Report from Orion Report Writer.
7. Click Submit.
9. Click Edit in the title bar of the Report from Orion Report Writer resource.
the included report.
11. If you want a subtitle, enter a new Subtitle for the included report.
12. Select a Report to include.
13. If you want to add a filter to the included report, enter an appropriate
query in the Filter Nodes field.
Note: Filter Nodes is an optional, advanced, web console feature that
requires some knowledge of SQL queries. Click + next to Show Filter
Examples to view a few example filters.
14. Click Submit.
171

Displaying a Custom List of Reports
The web console allows you to populate a custom view with a custom reports list.
When clicked from the list, each report opens in a new window. The following
procedure details the steps required to enable a custom list of network reports.
To display a custom list of reports:
1. Create a new view or edit an existing view. For more information, see Customizing Views on page1.
2. Select the view to which you want to add the custom list of reports, and
then click Edit.
3. Click + next to the column to display the custom list of reports.
4. Click + next to Report Writer.
5. Check Custom List of Reports, and then click Submit.
6. Click Preview on the Customize YourView page, and then click Edit in
the title bar of the Report from Orion Report Writer resource.
the header of the reports list.
8. If you want a subtitle, enter a new Subtitle for the custom list of reports.
9. Check the reports that you want to include in your custom list of reports.
Note: To allow a user to view a report included in the custom list, you must
set the report access for the account. For more information, see Configuring an Account Report Folder on page1.
10. Click Submit.
Filtering Nodes
Your Orion Web Console can maintain a customizable node list for your network.
Node lists may be configured for specific views using SQL query filters. The
following steps set up node filtering for node lists included in web console views.
To enable filtering on a node list:
2. Select the view to which you want to add the node list, and then click Edit.
3. Click + next to the view column in which you want to display the node list.
4. Click + next to Node Lists, check All NodesTable, and then click Submit.
172
Grouping Nodes
5. Click Preview on the Customize YourView page, and then click Edit in
the title bar of the All NodesTable resource.
the node list.
7. If you want a subtitle, enter a new Subtitle for the node list.
8. If you want to filter your node list by text or IP address range, provide
the text or IP address range by which you want to filter your node list in the
Filter Text field, as shown in the following examples:
l Type Home in the Filter Text field to list all nodes with Home in the node
name or as a location.
Type 192.168.1.* in the Filter Text field to list all nodes in the 192.168.1.0-255 IP
address range.
9. Select the property that is appropriate to the filter text provided above, as
shown in the following examples:
l If you typed Home in the Filter Text area, select Node Name or Location
to list nodes with Home in the node name or as a location.
If you typed 192.168.1.* in the Filter Text area, select IP Address to list only
nodes in the 192.168.1.0-255 IP address range.
10. If you want to apply a SQL filter to the node list, enter an appropriate
query in the Filter Nodes (SQL) field.
Notes:
l
Filter Nodes (SQL) is an optional, advanced, web console feature that

By default, node list resources are designed to sort nodes alphabetically by

node caption. This configuration can not be overwritten using a SQL filter,
so order by clauses included in SQL filters are redundant and will result in
Custom SQL filter formatting errors.
11. Click Submit.
Grouping Nodes
Your Orion Web Console can maintain a customizable node list for your network.
Node lists may be configured for specific views with node grouping. The following
steps set up node grouping for node lists included in web console views.
173

To enable grouping on a node list:
1. Create a new view or click Customize Page in the top right of an existing
web console view.
2. Click + next to the view column in which you want to display the node list.
3. Click + next to Node Lists.
4. Check All NodesTree (AJAX), and then click Submit.
5. Click Done.
6. Click Edit in the title bar of the All NodesTree (AJAX) resource.
the node list.
8. If you want a subtitle, enter a new Subtitle for the node list.
9. Select up to three criteria, in specified levels, for Grouping Nodes within
your web console view.
10. If you want to apply a SQL filter to the node list, enter an appropriate
query in the Filter Nodes field.
Notes:
l
Filter Nodes (SQL) is an optional, advanced, web console feature that

By default, node list resources are designed to sort nodes alphabetically by

node caption. This configuration can not be overwritten using a SQL filter,
so order by clauses included in SQL filters are redundant and will result in
Custom SQL filter formatting errors.
11. Click Submit.
Adding a Service Level Agreement Line to Charts (Orion NPM)
The Orion Web Console can display a service level agreement (SLA) line on any
Min/Max/Average bps chart. When you add a customer property named SLA
and populate the field with your device SLA values, the Orion Web Console will
display the appropriate line on your charts.
Notes:
l
Interface data is only available in Orion NPM.
174

l
The SLA line may not appear immediately. It may take several minutes for
the change to be detected by the Orion web engine.
To add a Service Level Agreement line to Min/Max/Average bps charts:

1. Click Start> All Programs> SolarWinds Orion> Grouping and Access
Control> Custom Property Editor.
2. Click Add Custom Property.
3. Select Interfaces as the custom property object type, and then click Next.
4. Click SLA in the list of predefined Property Templates, and then click
Next.
5. Click Select Interfaces.
6. Select all interfaces to which you want to apply the same service level, and
then click Select Interfaces.
7. Enter the SLA value (in bps) in the SLA column for each interface you
want to label with SLA values. For example, type 1544000 for a T1 interface
(1.544 Mbps) or 225000 for a serial connection running at 225 Kbps.
8. If you want to enter a different SLA value for a different set of interfaces, click Add More, and then repeat interface selection and value population as indicated previously.
9. Click Submit.
10. Close the Custom Property Editor.
11. Click Start> All Programs> SolarWinds Orion> Orion Web Console.
12. Browse to the Interface Details view of one of the interfaces you edited.
The SLA line displays on any chart showing Min/Max/Average bps.

Selected web console views offer optional, fully customizable subviews that allow
you to more extensively organize the resources that are available in your web
console. The following sections provide provide steps to use, add, and configure
subviews:
l
l
l
l
l
Using a Subview
Using a Subview
Views in your web console that are configured to allow subviews provide a list of
available subviews under a column collapse (<<) and expand (>>) button on the
175

left of the view.
To open a subview:
1. Open a web console view that has subviews enabled.
Note: Click Customize Page to determine if you can enable subviews on
an open view. If subviews are available, you can check Enable left navigation in the Left Navigation section of the Customize View page, and
then click Done.
2. If the subview column on the left only displays icons, click >> at the top
of the column.
3. Click the desired subview.

left of the view. The following procedure provides steps required to add and
configure a new subview.
To add a subview:
1. Open a web console view that has subviews enabled.
Note: Click Customize Page to determine if you can enable subviews on
an open view. If subviews are available, you can check Enable left navigation in the Left Navigation section of the Customize View page, and
then click Done.
2. If the subview column on the left only displays icons, click >> at the top
of the column.
3. Click + Add tab.
4. Provide a new Tab Name, and then click Update.
5. If you want to select a different icon for the subview tab, click Browse
next to the current Tab Icon, click the new icon that you want to use, and
then click Select Icon.
6. If you want to change the column layout of your subview, complete the
following steps.
a. Click Edit to the right of the column widths, and then select the number
of columns under Layout.
b. Provide the width, in pixels, of each column in the appropriate fields,
resource:
Notes:
176

l
8.
9.
10.
11.
12.
13.
Editing resources for subviews is similar, in practice, to editing view

resources. For more information about editing views, see "Editing Views"
on page1.
Some resources may require additional configuration. For more information, see Resource Configuration Examples on page1.
Several options on the Add Resources page are added to the list of
a. Click next to the column in which you want to add a resource.
b. Click next to a resource group on the Add Resources page to
expand the resource group, displaying available resources.
c. Check all resources you want to add.
d. If you have completed the addition of resources to the selected
view, click Submit.
If you want to delete a resource from a column, select the resource, and
If you want to copy a resource in a column, select the resource, and
If you want to rearrange the order in which resources appear in your
view, click resources, and then click up and down arrow icons (
),
as necessary, to rearrange them.
If you want to change the display column for a selected resource, click
the resource, and then click right and left arrows (
), as necessary,
to move resources between columns.
If you want to change the subview for a selected resource, complete
the following steps:
a. Click the resource you want to move, and then click Move to a diffferent tab.
b. Under the Tab Name corresponding to the subview to which you want
to move the selected resource, select the desired subview column, and
then click Move Resource.
If you have finished configuring your view, click Preview.
Note: A preview of your custom subview displays in a new window. A message may display in the place of some resources if information for the
177

14. Close the preview window.
15. If you are satisfied with the configuration of your subview, click Done.

left of the view. The following procedure edits an existing subview.
To edit an existing subview:
1. From any web console view, click Settings in the upper right corner.
2. In the Views grouping, click Manage Views.
3. Click the subview you want to configure, and then click Edit.
Note: Subviews are listed with their parent views, as View Subview.
4. If you want to edit the subview name, edit Tab Name, and then click
Update.
5. If you want to select a different icon for the subview tab, click Browse
next to the current Tab Icon, click the new icon that you want to use, and
then click Select Icon.
6. If you want to change the column layout of your subview, complete the
following steps.
a. Click Edit to the right of the column widths, and then select the number
of columns under Layout.
b. Provide the width, in pixels, of each column in the appropriate fields,
resource:
Notes:
l
Editing resources for subviews is similar, in practice, to editing view

resources. For more information, see "Editing Views" on page1.
Some resources may require additional configuration. For more information, see Resource Configuration Examples on page1.
Several options on the Add Resources page are added to the list of
178
8.
9.
10.
11.
12.
13.
14.
15.
a. Click next to the column in which you want to add a resource.

b. Click next to a resource group on the Add Resources page to
expand the resource group, displaying available resources.
c. Check all resources you want to add.
d. If you have completed the addition of resources to the selected
view, click Submit.
If you want to delete a resource from a column, select the resource, and
If you want to copy a resource in a column, select the resource, and
If you want to rearrange the order in which resources appear in your
view, click resources, and then click up and down arrow icons (
),
as necessary, to rearrange them.
If you want to change the display column for a selected resource, click
the resource, and then click right and left arrows (
), as necessary,
to move resources between columns.
If you want to change the subview for a selected resource, complete
a. Click the resource you want to move, and then click Move to a diffferent tab.
b. Under the Tab Name corresponding to the subview to which you want
to move the selected resource, select the desired subview column, and
then click Move Resource.
If you have finished configuring your view, click Preview.
Note: A preview of your custom subview displays in a new window. A message may display in the place of some resources if information for the
Close the preview window.
If you are satisfied with the configuration of your subview, click Done.

left of the view. When you are configuring or expanding your use of subviews, it
can be helpful to use an existing subview as a template for additional, slightly
modified subviews. The easiest way to do this is to copy an existing subview, and
then edit it as necessary. The following procedure provides steps required to copy
an existing subview.
179

To copy an existing subview:
3. Click the subview you want to copy, and then click Copy.
Notes:
l
Original subviews are listed with their parent views, as View Subview.
Subview copies are listed as Copy of View Subview.

4. Edit the copied subview as an existing subview. For more information, see
"Editing an Existing Subview" on page1.

left of the view. The following procedure provides steps required to delete an
existing subview.
To delete an existing subview:
3. Click the subview you want to delete, and then click Delete.
Note: Subviews are listed with their parent views, as View Subview.
Using the Orion Web Console Message Center

The Message Center provides a single, customizable view in the web console
where, in a single table, you can review all events, alerts, traps, and Syslog
messages on your network.
To view and configure the Message Center:
1. Click Home> Message Center.
2. If you only want to see messages for specific devices, select appropriate device properties in the Filter Devices area.
3. In the Filter Messages area, select the Time period for the messages you
want to review, and then provide the number of messages you want to
show.
4. If you want to show all messages, Including messages that have been
acknowledged, check Show acknowledged in the Filter Messages area.
5. If you only want to see certain types of messages, filter messages as
shown in the following steps:
180

a. If you want to view alerts, confirm that Show triggered alerts is
checked, and then select the type of alerts to display.
b. If you want to view event messages, confirm that Show event messages is checked, and then select the type of events to display.
c. If you want to view Syslog messages, confirm that Show syslog
messages is checked, and then select the Severity and Facility of the
Syslog messages you want to display.
Note: For more information about Syslog severities and facilities, see
Syslog Message Priorities on page1.
d. If you want to view received traps, confirm that Show received traps
is checked, and then select the Trap type and Community String of
the traps you want to display.
e. If you want to view audit events, confirm that Show Audit Events is
checked, and then select the Action type and User corresponding to
the audit events you want to display.
6. Click Refresh to update the list of displayed messages.

Many views in the Orion Web Console may be exported directly to portable
document format (.pdf). Views that may be exported display Export to PDF in the
top right corner of the exportable view.
Note: The Export to PDF feature requires IIS Anonymous Access. Confirm that
the IUSR_SERVERNAME user is in the local Users group on your Orion server.
To export a view to PDF:
1. Open the web console view to export, and then click Export to PDF in the
top right corner of the view.
2. If you are prompted to save the .pdf file, click Save.
3. Navigate to an appropriate location, provide an appropriate file name, and
then click Save.
Creating a Custom Summary View

The Orion Custom Summary View enables you to create a fully customized
object-based view composed solely of resources you have selected. The
following procedure creates a custom summary view in the web console.
To create or edit a custom summary view in the web console:
1. Click Home> Custom Summary.
2. Click Edit in any Custom Object Resource.
181

3. Provide a Title and Subtitle for the selected Custom Object Resource.
4. Click Select Orion Object.
5. On the Select a network object window, use the Show only and Group
by: selection fields, as appropriate, to filter the list of monitored objects.
6. Select the Orion object on which you want to base the selected Custom
Object resource, and then click Select Orion object.
7. Select the type of information you want the custom resource to display
about the selected object, and then customize the resource, as indicated in
a. If you have selected an alerts resource, indicate whether or not you
want to display acknowledged alerts by checking or clearing Show
Acknowledged Alerts, as appropriate.
b. If you have selected a resource to which SQL filters may be
applied, edit available SQL filters as appropriate. For more information,
see Using Node Filters on page1.
c. If you have selected a resource with an AutoHide option, select
Yes or No to enable or to disable the Auto-Hide feature, respectively. If
enabled, the resource is automatically hidden if and when related data
is not present in the Orion database.
d. If you have selected a sortable list resource, in the Sort By field select
the property by which you want the list sorted.
e. If you have selected a gaugestyle resource, select a gauge Style
and provide a Gauge Size.
f. If you have selected a chartstyle resource, select an appropriate
Time Period and Sample Interval, and then indicate whether or not
you want to show a Trend Line.
g. If you have selected a Universal Device Poller resource, select the
Universal Device Poller and Chart Format, and then configure all
other options as required for similar resource types.
8. Click Submit.
Note: For more information about customizing available resource types,
click Help in the header of any resource on the Custom Summary view,
and then click the corresponding resource type.
Creating and Editing External Website Views

With the external website view feature, any NPM administrator can select any
external website and designate it as an Orion Web Console view, as shown in the
following procedure.
To create or edit an external website view in the web console:
182

2. Click External Websites in the Customize grouping of the Orion Website
3. If you want to delete an existing external website, click Delete next to
the website you want to delete, and then click OK to confirm the deletion.
4. If you want to add a new external website, click Add.
5. If you want to edit an existing external website, click Edit next to the
name of the website you want to edit.
6. Provide a Menu Title for the external website to display in the Views toolbar.
7. If you want to include a heading within the view, provide an optional
Page Title to display within the view.
8. Provide the URL of the external website, in http://domain_name format.
9. Select the Menu Bar to which you want to add the new external website
link.
Note: For more information about customizing menu bars, see Customizing Web Console Menu Bars on page1.
10. Click OK.
11. Click Preview to view the external website as the web console will display
it.

The following sections provide details for customizing your Orion Web Console:
l
l
l


The menu bars displayed at the top of every page may be configured to display
various menu items. You can also define menu items and add them to custom
menu bars. For more information about customizing menu bars for individual
accounts, see Editing User Accounts on page1.
The following procedure customizes a web console menu bar.
To customize web console menu bars:
2. Click Customize Menu Bars in the Customize grouping of the Orion Website Administration page.
183

3. If you want to modify an existing menu, click Edit beneath the menu bar
you want to modify, and then click and drag items between the Available
items list on the left and the Selected items list on the right until the Selected items list includes all the items you want to include in your edited
menu.
Note: Hover over any view title to read a description. Selected items display from left to right in the edited menu bar as they are listed from top to
bottom.
4. If you want to create a new menu bar, complete the following steps:
a. Click New Menu Bar, and then provide a Name for the New Menu
Bar.
b. Click and drag the buttons you want to include in your new menu bar
from the Available items list on the left to their correct relative locations
in the Selected items list on the right.
Note: Hover over any view title for a description. Selected items display
from left to right in the new menu bar as listed from top to bottom.
5. If you want to add menu items, complete the following steps:
a. Click Edit under the menu bar to which you are adding the new item.
b. Click and drag the items you want to include in your new menu from the
Available items list on the left to their correct relative locations in the
Selected items list on the right.
Notes:
l
Hover over any view title to read a view description. Selected items display
from left to right in the new menu bar as they are listed from top to bottom.
If you check Reports from the Select Menu Items page, you must also enable
reports for the accounts that use the menu bar. For more information, see
Configuring an Account Report Folder on page1.
6. If you want to add a custom menu item, complete the following steps:
a. Click Edit under the menu bar to which you are adding the custom item.
b. Click Add, and then provide the Name, URL, and Description of your
custom menu item.
c. If you want the menu option to open in a new window, check Open
in a New Window.
d. Click OK.
7. If you want to delete a menu item, click and drag the item to delete from
the Selected items list on the right to the Available items list on the left.
Warning: Do not delete the Admin option from the Admin menu bar.
184

8. If you want to change the location of an item in your menu, click and
drag items to move them up and down in the Selected items list.
9. If you have finished editing your menu bar, click Submit.

The overall color scheme of the Orion Web Console may be changed to any of
several color schemes that are viewable by all users, as shown in the following
procedure.
To change the web console color scheme:
2. Click Color Scheme in the Customize grouping.
3. Select the desired color scheme, and then click Submit.

The Orion Web Console can be configured to display your logo instead of the
default SolarWinds banner across the top of every web console page. The
following steps change the default SolarWinds web console banner.
To change the web console banner:
1. Create an appropriately sized graphic to replace the SolarWinds logo.
Notes:
l
The SolarWinds banner file is 271x48 pixels at 200 pixels/inch.
The SolarWinds.com End User License Agreement prohibits the modification,

elimination, or replacement of either the SolarWinds.com logo and link on the
menu bar or the SolarWinds copyright line at the bottom of the page.
2. Place your graphic in the images directory.
Note: By default, it is in C:\Inetpub\SolarWinds\NetPerfMon\.
3. Log in to the web console as an administrator, and then click Settings in
the top right of the web console.
4. Click Web Console Settings in the Settings grouping of the Orion Website Administration page.
5. Type the new logo image name as a replacement for SolarWinds.Logo.jpg in
the Site Logo URL field.
Configuring the Available Product Updates View

The Orion Web Console can automatically check for the availability of any
updates to your currently installed Orion products. By default, the web console
185

regularly checks for product updates automatically, as indicated by the dates and
times reported as Last Check and Next Check, but you can click Check Now at
any time to see an up-to-the-minute update. If updates are available, a note is
posted in the web console notification bar and updates are listed in this view,
where you can then select and download them as needed.
Note: For more information about downloading listed product updates, see
Updating your Orion Installation on page1.
To configure product updates:
the top right corner of the web console.
2. Click Available Product Updates in the Product Updates grouping.
3. If you want to disable the automatic check for product updates, clear
Check for product updates, and then click Save Settings.
4. If you want to ensure that updates are listed for all currently installed
Orion products, including Orion NPM, SAM, and all Orion modules,
check Show all updates.
5. Click Save Settings.
Updating your Orion Installation

If your Product Updates view is configured to list Orion updates, you can
download them directly from the Product Updates view.
To update your Orion installation:
the top right corner of the web console.
2. Click Available Product Updates in the Product Updates grouping.
3. Click Check Now to refresh the updates list.
4. If there are any updates you want to ignore, check the updates to
ignore, and then click Ignore Selected.
5. Check the updates you want to apply, and then click Download Selected.
6. Save and then execute downloaded installers. For more information, see
either the readme.txt file packaged with the downloaded update or review
related documentation available at www.solarwinds.com.
Orion Web Console and Chart Settings

The Orion Website Settings page allows an Orion Web Console administrator to
set a number of options that apply to the web console user environment. The
following settings are configured on this page:
186

l
l
l

Chart Settings
Discovery Settings
The following procedure configures web console settings.

To configure Orion Website and Chart Settings:
1. Click Settings in the top right of the web console, and then click Web Console Settings in the Settings group.
2. When you finish configuring web console and chart settings, click Submit.

The following options are configured on the Orion Web Console Settings
page:
l
Session Timeout is the amount of time (in minutes) the Orion Web
Console waits through user inactivity before the user is logged out.
Windows Account Login allows you to select whether or not you want to
enable automatic login with Windows Active Directory credentials. With
this feature enabled, in the future, the current user can log in automatically.
Page Refresh specifies the amount of time that passes before a web console page, or view, reloads automatically.
Site Logo URL is the local path to the banner graphic that appears at the
top of every web console page. For more information about changing the
banner to display your logo, see Changing the Web Console Site Logo
on page1.
Site Login Text is optional text displayed on the Orion Web Console login
page. The text entered here is seen by all web console users when they
log in. HTML tags are allowed.
Help Server is the URL of the server where online help for Orion products
is stored. The default location is http://www.solarwinds.com. If you are in
an Internet-restricted network environment but require access to online
help, download the entire online help, copy it to a web server, and then
change the Help Server URL to that of the web server. You can download
the online help from http://www.solarwinds.com/support/Orion/docs/OrionLocalHelp.zip.
Status Rollup Mode establishes the way the availability status of a collection of nodes on the node tree or on a map is displayed in the web console. For more information about the types of information communicated
using status icons, see Status Icons and Identifiers on page1. For more
information, see Status Rollup Mode on page1.
187

There are two options for the case when there are nodes of differing statuses in a
selected group:
l
Mixed Status shows Warning, the default status, ensures the status of a
node group displays the worst warning-type state in the group. If none of
the group members have a warning-typed state but the group contains both
up and down nodes, a Mixed Availability warning state is displayed for the
whole group. For example, Critical + Down = Critical, Critical + Warning = Critical, and Up + Down = Mixed Availability.
Show Worst Status ensures the worst state in a node group is displayed for the
whole group. For example, Up + Down = Down and Unreachable + Shutdown =
Shutdown.
l
Child Status Rollup Mode indicates how the status of any single node on
the node tree or on a map is displayed. You can show the status of the
node and its children, node status and interfaces, if you have Orion NPM
installed, or just node ICMP status.
Select Show Worst Status to ensure that the worst status of the node group is
displayed for the whole group (e.g. red if any of the nodes are down). Select
Show Worst Status (Interfaces only) to ensure that the worst status of any of the
interfaces on a selected node is displayed. Select Show only ICMP Status to
only display up/down status for monitored interfaces.
l
Child Status Display Mode designates how the status of the children of
any single node on the node tree or on a map is displayed. You can show
the status of the node and any of its children with either a static of a blinking icon. By default, Orion uses a static icon to display the status of child
objects.
Chart Settings
The following chart settings may be configured in the Chart Settings section
of the Web Console Settings page:
l
l
l
Chart Aspect Ratio is the height/width ratio for web console charts. This
ratio should be set between 0.25 and 3.0 to avoid erratic display problems,
though the performance of individual systems may differ.
Thumbnail Aspect Ratio is the height/width ratio for chart thumbnails.
95th Percentile Calculations is a setting that adds annotation lines to
charts at the entered percentile. This value is normally set to 95. For more
information, see 95th Percentile Calculations on page1.
188
Using Node Filters

Font Size sets the default relative size, Small, Medium, or Large, of the
text that is displayed within charts in the Orion Web Console. This setting
is independent of your browser settings. The font settings in your browser
will affect resource headers and some resource contents.
Discovery Settings
l
The Discovery Settings section provides the Notify about new removable
volumes option. This option allows you to indicate whether or not you want to be
notified when removable volumes are added to your network and discovered
during network discovery. For more information about network discovery in NPM,
see Discovering and Adding Network Devices on page1.
Using Node Filters

When you are managing or monitoring large numbers of network devices, node
list resources can easily become very large and difficult to navigate. Filters are
optional SQL queries that are used to limit node list displays for easier resource
navigation. SQL queries can be made on any predefined or custom properties.
For more information about defining custom properties, see Creating Custom
PropertiesCore on page1.
To apply a node filter:
1. Click Edit in any node list resource.
2. Provide an appropriate SQL query in the Filter Nodes (SQL) field, and
then click Submit.
The following are a few example filters with associated SQL queries.
Note: By default, node list resources are designed to sort nodes
alphabetically by node caption. This configuration can not be overwritten
using a SQL filter, so order by clauses included in SQL filters are redundant
and will result in Custom SQL filter formatting errors.
l
Filter the results to only show nodes that are not Up:
Status<>1
The following are valid status levels:

0 = Unknown (current up/down status of the node is unknown)
1 = Up (The node is responding to PINGs)
o 2 = Down (The node is not responding)
o 3 = Warning (The node may be responding, but the connection
o
o
l
l
from the
server to the Node is dropping packets)

Only show Cisco devices: Vendor = 'Cisco'
Only show devices in Atlanta. (using a custom property named City):
City = 'Atlanta'
189
l
l
Only show devices beginning with "AX3-": Caption Like 'AX3-*'

Only show Nortel devices that are Down:
Vendor Like 'Nortel*' AND Status=2

l
Only show devices ending in '-TX': Vendor Like '*-TX'
Custom Charts in the Orion Web Console

The Orion Web Console provides charts for all monitored objects that you can
customize for your own use, as detailed in the following sections.
Customizing Charts in the Orion Web Console

Clicking any chart opens the Custom Chart view in a new window, displaying the
selected chart with additional chart customization options. For more information
about the Custom Chart view, see "Custom Chart View" on page1.
You can also configure any custom chart resource in the Orion Web Console
directly from the resource title bar either by selecting from the dropdown menu of
options or by clicking Edit to display the Edit Chart Title view, as described in the
following sections.
Custom Chart Resource Title Bar Options
The title bar menu of the custom chart resource provides the following options for
viewing chart data:
l
l
l
l
View chart data over the Last 7 Days or over the Last 30 Days
Select Edit Chart to view and modify chart settings.
Note: This is the same as clicking Edit in the title bar.
View Chart Data as an HTML format document
View Chart Data in Excel to see chart data in an Excel-compatible
format
Edit Chart Title View

Click Edit in the title bar of a custom chart resource to display the Edit Chart Title
view. This view provides the following options to configure your chart resource:
l
Select a Chart allows you to change the chart type displayed in the current
resource. Chart options are determined in accordance with the type of view
displaying the resource you are currently editing. For more information
about available node charts, see Custom Node Charts on page1. For
more information about available volume charts, see Custom Volume
Charts on page1.
190
Custom Node Charts

l
The Time Period for the selected chart may be any of the following:
Last Hour
Last 2 Hours Last 24 Hours Today
Yesterday
Last 7 Days This Month
Last Month
Last 30 Days Last 3 Months This Year
Last 12 Months
The Sample Interval for the selected chart may be any of the following:
Every Minute
Every 5 Minutes Every 10 Minutes Every 15 Minutes
Every 30 Minutes Every Hour
Every 2 Hours
Every 6 Hours
Every 12 Hours One a Day
Every 7 Days
Notes:
l
Each sample interval is represented on a chart by a single point or bar.

Data within a selected sample interval is summarized automatically.
Due to limits of memory allocation, some combinations of time periods and

sample intervals require too many system resources to display, due to the large
number of polled data points. As a result, charts may not display if the time period
is too long or if the sample interval is too small.
l
The Trend Line option allows you to enable the trend line feature of NPM
charts. By enabling trend lines on NPM charts, you can see potential future
results as they are extrapolated from collected historical data.
Note: Due to the broad array of factors that can affect the performance of
devices on your network, trend lines provided on NPM charts are intended
as approximate predictions of future data only.
For more information about customizing web console views, see Customizing
Views on page1. Some charts also provide a 95th Percentile marker for your
reference. For more information, see 95th Percentile Calculations on page1.
Custom Node Charts

The following node-related charts, grouped by type, are available as resources
within the Orion Web Console. To add any of these charts to a web console view
dealing with monitored nodes, add the Custom Node Chart resource to the Node
Details view. For more information about adding resources to Orion Web Console
views, see Customizing Views on page1. For more, see Orion Web Console
and Chart Settings on page1.
191

Availability
The following charts are available to display node availability information over
custom time periods for nodes monitored by Orion.
l
l
l
Availability
AvailabilityAutoscale
Availability and Response Time
CPU Load
The following charts display CPU loading information over specified periods of
time for nodes monitored by Orion.
l
l
Average CPU Load

Min/Max/Average CPU Load
Memory Usage
The following charts present memory usage information over custom time periods
for nodes monitored by Orion.
l
l
l
l
Average Memory Usage

Memory/Buffer Failures
Min/Max/Average Memory Usage
Percent Memory Used
Packet Loss and Response Time

The following charts are available to display historical statistics about packet loss
and response time for nodes monitored by Orion.
l
l
l
l
l
l
l
Availability and Response Time

Average Response Time
Average Response Time and Packet Loss
Min/Max/Average Response Time
Min/Max/Average Response Time and Packet Loss
Percent LossBar Chart
Percent LossLine Chart
Custom Volume Charts

The following volume-related charts, grouped by type, are available as resources
within the Orion Web Console. To add any of these charts to a web console view
dealing with monitored volumes, add the Custom Volume Chart resource to the
Volume Details view. For more information about adding resources to Orion Web
192

Console views, see Customizing Views on page1. For more information about
customizing the following charts, see Orion Web Console and Chart Settings on
page1.
Allocation Failures
Shows the number of disk allocation failures that have occurred on the
selected volume.
Min/Max/Average Disk Usage
Shows both the total disk space available and the average amount of disk
space used on the selected volume. Bars are also included to show
minimum and maximum levels of disk usage.
Percent Disk Usage
Shows the total available disk space and the average amount of disk space
used, as a percentage of the total available, on the selected volume.
Volume Size
Shows the total disk space available on the selected volume.

Multiple object charts allow you to create charts on which you can either compare
the same type of data across multiple objects or compare data for multiple child
objects on a single parent node. To add any of these charts to a web console
view dealing with monitored nodes, add the Multiple Object Chart resource. For
more information about adding resources to Orion Web Console views, see
Customizing Views on page1. For more information about customizing charts,
see Orion Web Console and Chart Settings on page1.
Custom Chart View

Charts in the Orion Web Console are easily customizable. Clicking a chart opens
the Custom Chart view in a new window. The following sections describe options
that are available on the Custom Chart page to modify the presentation of a
selected chart.
Note: Click Refresh at any time to review changes you have made.
Printing Options
To print your customized chart, click Printable Version and a printable version of
your customized chart displays in the browser.
193

Chart Titles
Chart Titles are displayed at the top center of a generated chart. The Chart Titles
area allows you to modify the Title and Subtitles of your generated chart.
Note: Orion may provide default chart titles and subtitles. If you edit any of the
Chart Titles fields on the Custom Chart page, you can restore the default titles
and subtitles by clearing the respective fields, and then clicking Submit.
Time Period
Predefined and custom time periods are available for generated charts. You may
designate the time period for a chart by either of the following methods:
l
l
Select a predefined period from the Select a Time Period: menu.

Provide custom Beginning and Ending Dates/Times in the appropriate
fields in the Time Period area.
Sample Interval
The sample interval dictates the precision of a given chart. A single point or bar is
plotted for each sample interval. If a sample interval spans multiple polls, data is
automatically summarized and plotted as a single point or bar on the chart.
Note: Due to limits of memory allocation and the large number of polled data
points, some combinations of time periods and sample intervals may require too
many system resources to display. As a result, charts may not display if the time
period is too long or if the sample interval is too small.
Chart Size
Chart Size options configure the width and height, in pixels, of the chart. You can
maintain the same width/height aspect ratio, or scale the chart in size, by entering
a width in the Width field and then entering 0 for the Height.
Font Size
Font sizes for generated charts are variable. The Font Size option allows you to
select a Small, Medium, or Large size font for your chart labels and text.
Note: Font Size selections are maintained in the printable version of your chart.
Data Export Options
The Display Data from Chart area provides the following options to export chart
data as either Excel-compatible Raw Data or as HTML-formatted Chart Data:
194

l
To view chart data in an Excel-compatible format, click Raw Data, and

then follow the prompts, if provided, to open or save the resulting raw data
file.
To view HTML-formatted chart data in a new browser, click Chart Data.

The Orion Web Console provides a Custom Object resource that enables you to
configure any of a wide array of resources to display performance data for any
specific monitored objects. The following sections provide more information about
editing a Custom Object resource, selecting monitored objects, and configuring
the data displayed in a Custom Object resource:
l
l
l


The following procedure edits a Custom Object resource.
To edit a Custom Object resource:
1. Click Edit in the header of a Custom Object resource.
2. Edit the resource Title and Subtitle as appropriate.
3. Click Select Orion Object to select an appropriate monitored object. For
more information, see Selecting Custom Objects and Resources.
4. If you have completed your edits, click Submit.

The following procedure selects a network object for a selected Custom Object
resource.
To select a custom monitored object for a Custom Object resource:
1. Click Edit in the header of a Custom Object resource.
3. In the Show only: field, select the type of object you want to monitor in the
Custom Object resource.
4. In the Group by: field, select an appropriate object grouping criterion.
Note: Defined custom properties are listed for all grouping types.
5. Click the object to monitor in the list on the left, ad then select it in the main
pane.grouping criterion.
195

7. Select the desired resource type in the Select object resource field, and
then configure options as required. For more information about available
resources, see Available Custom Resources.

A Custom Object resource may be configured to provide the same data as any of
a number of Orion Web Console resources for a selected network object:
Notes:
l
l
Resource availability is dependent on the Orion products installed.

For more information about any available custom resource, click Help in
the resource title to view the corresponding help topic.
Integrating SolarWinds Engineers Toolset

When you are browsing the Orion Web Console from a computer that already has
a SolarWinds Toolset installed, NPM allows you to launch Toolset tools directly
from your web browser. Right-clicking any monitored object listed in an Orion
Web Console running the Toolset Integration displays a menu of available
Toolset tools and functions. The following sections detail the configuration of the
available Toolset integration.
Note: For more information about the SolarWinds Engineers Toolset tools, see
www.solarwinds.com.
Installing the Toolset Integration

In some environments in which a SolarWinds Toolset is already installed, the
Toolset integration may not install automatically. The following procedure installs
the Toolset integration in environments in which it has not installed automatically.
Note: Manual installation is required in Internet Explorer 8 with UAC enabled.
To install the Toolset integration:
1. Download the Toolset integration installer from your primary SolarWinds
server: http://SolarWindsServer:port/swtoolset.exe.
2. Copy swtoolset.exe to C:\Windows\Downloaded Program Files\ on your local
SolarWinds installation.
3. Acknowledge the UAC prompt, and then complete the installation.
196

The following procedure configures SolarWinds Toolset for integration within the
Orion Web Console.
Note: The first time the Toolset tools are accessed, a security warning may be
displayed. Click Yes to allow the toolset integration.
To configure SolarWinds Toolset integration settings:
1. Right-click any monitored object displayed within the Orion Web Console.
2. Click Settings.
3. Click SNMP Community String.
Note: The first time you launch a tool requiring an SNMP community string
from the right-click menu, the SNMP Community String window displays.
4. If you want to delete any or all saved community strings, select the
strings that you want to delete, and then click Remove, or click Remove
All.
5. Click Menu Options, and then configure the right-click menu as follows:
a. If you want either to add menu items to the right-click menu or to
remove menu items from the right-click menu, move menu items
between the list of Available Menu Options on the left and Selected
Menu Options on the right by selecting items in either column and clicking the right and left arrows, as appropriate.
b. If you want to change the order of menu items, select items and then
click the up and down arrows next to the Selected Menu Options list.
c. If you want to add a separator between items, move the -------------menu option from the Available list to the Selected list, and then move
it to your preferred location within the Selected Menu Options list.
6. Click Automatic Menu Items.
7. Check either or both, if available, of the following options:
Note: These options expand the list of available menu items by incorporating menu links to MIB browser bookmarks and Real-Time Interface
Monitor saved reports, respectively.
Automatically add sub-menu items to the MIB Browser (Query MIB)
menu option from the MIB Browers Bookmarks.
Automatically add sub-menu items to the Real Time Interface Monitor
menu option from the Real-Time Interface Monitor saved report types.
Adding Programs to a Toolset Integration Menu

The following procedure provides the steps required to add any external scripts or
applications to the SolarWinds Toolset integration menu.
197

To add a program to the SolarWinds Toolset Integration menu:
1. If you want to add an external script to the Toolset Integration menu,
save the script in an appropriate location on the install volume of your
Orion server (e.g. <InstallVolume>:\\Scripts\).
2. If you want to add an external application to the Toolset Integration
menu, install the application in an appropriate location on the install
volume of your Orion server (e.g. <InstallVolume>:\\Application\).
3. Open SWToolset.MenuOptions in a text editor.
Note: By default, SWToolset.MenuOptions is located in the following folder:
<InstallVolume>:\\<LocalApplicationData>\SolarWinds\Common\, where
<LocalApplicationData> for the current Windows user is
<ProfileFolder>\LocalSettings\Application Data.
4. Save a copy of SWToolset.MenuOptions as SWToolset_Old.MenuOptions.
5. Add the following line between the <MenuOptions></MenuOptions> tags of the
SWToolset.MenuOptions file:
<MenuOption Visible="TRUE" Title="ApplicationName" BeginGroup="FALSE"
HasSubMenu="FALSE" ExecString="<InstallVolume>:\\Application\ExecutableFile"
Icon="" Extra="" Parent="" Required="4"/>
Note: The string supplied for Title is the name for the added script or application
that will display in the menu. The string supplied for the ExecString is the path to
the script or application executable file.
6. Save the new SWToolset.MenuOptions to automatically update the Toolset
Integration menu.
Using Integrated Remote Desktop

Sometimes it is necessary to console into a remote server to troubleshoot an
issue. This can be accomplished within the Orion Web Console as follows.
Notes:
l
l
Press Ctrl+Alt+Break to enter/exit full screen mode.

Remote Desktop is not supported by Windows Server 2003 IPv6. For more
information, see the Microsoft TechNet article, Exploring IPv6.
To launch Integrated Remote Desktop:

1. Open the Node Details view for the server you want to view remotely.
Note: The easiest way to open the Node Details view is to click the remote
server you want to view in any All Nodes resource.
2. Click , located at the of the Node Details view.
Note: Depending on the security settings of your browser, you may be
198

asked to install an ActiveX control for remote desktop viewing. Follow all
prompts to install this required control.
3. Verify the Server IP address or hostname, select an appropriate Screen
Size, and then click Connect.

The Orion Web Console supports the use of HTTP, SSH, and Telnet protocols for
remote device access if associated applications like PuTTy and FiSSH on your
Orion server are properly registered. For more information, see the MSDN article,
Registering an Application to a URL Protocol. Launch remote access
applications from any Details view as follows:
l
l
l
To browse directly to the viewed device using a web browser, click

To open a secure shell (SSH) to a monitored device, click .
To open a Telnet session with a monitored device, click .
199
200
Chapter 13: Managing Devices in the

Web ConsoleCore
Managing all the monitored devices on your network is greatly simplified with the
Node Management feature of the Orion Web Console. Using this tool, you can
easily add and remove devices and quickly view and edit device properties. Any
user that has been granted node management rights can directly access the
Node Management tool either from any All Nodes resource or through the Orion
Website Administration page. For more information about granting node
management rights, see Editing User Accounts on page1. The following
sections describe the various functions that allow you to view and manage all
your network devices from the Orion Web Console.
Note: The Node Management feature is accessible by clicking Manage Nodes
either in the header of any All Nodes resource or in the Node & Group
Management grouping of the Orion Website Administration page. The All Nodes
resource is included on the Orion Summary Home view by default, but you can
include it on any other web console view as well. Confirm that the All Nodes
resource is available on an appropriate Web Console view before continuing. For
more information about adding resources to Orion Web Console views, see
Editing Views on page1.

The following procedure details the steps required to add a device for monitoring
in the Orion Web Console.
Note: This procedure does not specifically address the addition of objects that
are specifically monitored solely by individual Orion products. For more
information, see the Administrator Guide for each specific Orion product.
To add a device for monitoring in the Orion Web Console:
201

3. Click Manage Nodes in the Node & Group Management grouping of the
Orion Website Administration page.
4. Click Add Node on the Node Management toolbar.
5. Provide the hostname or IP Address of the node you want to add in the
Hostname or IP Address field.
6. If the IP address of the selected node is dynamically assigned, check
Dynamic IP Address (DHCP or BOOTP), and then provide the DNS
Hostname and select the appropriate IP Address Resolution format
(IPv4 or IPv6) for the selected node.
Note: The IP address will be determined automatically. If the selected
device is dual-stack, IPv4 resolution will be used, by default.
7. Select the appropriate Polling Method, as follows:
l If you are adding this node only to monitor an object on the node and
not the node itself, select No Status: External Node.
Note: No data is collected for external nodes.
l
If you only want to use ICMP to monitor the node you are adding,
select Status Only: ICMP.
Note: Select this option for limited data collection for nodes that support neither
WMI or SNMP. Only status, response time, and packet loss data are collected for
ICMP-only nodes.
l
If you are adding a Windows Server, and you only want to use WMI
and ICMP for monitoring, select Windows Servers: WMI and ICMP, and
then provide appropriate WMI credentials for the Windows Server you are
adding.
Note: Using WMI to monitor your added node may not provide as much data as
you may be able to obtain using SNMP.
If you are adding a node for typical monitoring, select Most Devices: SNMP
and ICMP, and then provide the SNMP Version and SNMP Port fields, as
appropriate.
Note: If the SNMP port on the added node is not the Orion default of 161,
provide the actual port number in the SNMP Port field.
8. If you are using SNMP to poll the selected node and you want to
provide additional community strings, provide them in the Community
String field.
Notes:
202

l
For most SNMPv2c devices, the community string public gives Orion NPM
sufficient access. If you are providing multiple community strings, separate
them with spaces, as shown in the following example:
Cstring1 Cstring2 Cstring3
Orion uses SNMPv2c by default. If the device you are adding supports or
requires the enhanced security features of SNMPv3, select SNMPv3. If
SNMPv2c is enabled on a device you want NPM to monitor, by default,
NPM will attempt to use SNMPv2c to poll for performance information. If
you only want NPM to poll using SNMPv1, you must disable SNMPv2c on
the device to be polled.
9. If you have selected SNMPv3 as the SNMP version for the selected
node and you want to provide additional read/write community
strings, provide them in the Read/Write Community String field, as
shown in the following example:
l
RWCstring1 RWCstring2 RWCstring3
10. If you want to save the provided credentials as a credential set,

provide a Name, and then click Save.
11. If there are multiple polling engines in your environment, select the
appropriate polling engine for the node you are adding. For more information, see Changing Polling Engine Node Assignments in the
SolarWinds Orion Network Performance Monitor Administrator Guide.
12. If the selected node is a UCS Manager and you want to poll for UCS
data, check UCS manage credentials, and then provide the following:
l The Port on which the UCS Manager listens to managed UCS objects
l A valid User name and Password
Notes:
After providing credentials, click Test to confirm that they are valid for the
selected UCS Manager.
l Currently, only the HTTP protocol is supported for monitoring managed
UCS objects.
13. If the selected node is a VMware ESX or vCenter server, check Poll for
VMware, and then either select the appropriate credential from the
Choose Credential dropdown menu or provide credentials.
Note: If you know there are VMware devices on your network that you
want to monitor, confirm that you check Poll for VMware. Nodes cannot be
identified as VMware devices unless Poll for VMware is enabled.
14. Click Submit.
l
203
Changing the Polling Method for a Node

The following procedure details the steps required to change the polling method
used to monitor a node in the Orion Web Console.
To change the polling method used to monitor a node:
4. Check the node for which you want to change the polling method, and then
click Edit Properties.
5. Select the appropriate Polling Method, as follows:
l If you have added this node only to monitor an object on the node
and not the node itself, select No Status: External Node.
Note: No data is collected for external nodes.
l
If you only want to use ICMP to monitor the selected node, select
Status Only: ICMP.
Note: Select this option for limited data collection for nodes that support neither
WMI or SNMP. Only status, response time, and packet loss data are collected for
ICMP-only nodes.
l
If the selected node is a Windows Server, and you only want to use
WMI and ICMP for monitoring, select Windows Servers: WMI and
ICMP, and then provide appropriate WMI credentials for the Windows
Server you are adding.
Note: Using WMI to monitor your added node may not provide as much data as
you may be able to obtain using SNMP.
If you are adding a node for typical monitoring, select Most Devices: SNMP
and ICMP, and then provide the SNMP Version and SNMP Port fields, as
appropriate.
Note: If the SNMP port on the added node is not the Orion default of 161,
6. If you are using SNMP to poll the selected node and you want to
provide additional community strings, provide them in the Community
String field.
Notes:
204

l
For most SNMPv2c devices, the community string public gives Orion NPM
sufficient access. If you are providing multiple community strings, separate
them with spaces, as shown in the following example:
Cstring1 Cstring2 Cstring3
Orion uses SNMPv2c by default. If the device you are adding supports or
requires the enhanced security features of SNMPv3, select SNMPv3. If
SNMPv2c is enabled on a device you want NPM to monitor, by default,
NPM will attempt to use SNMPv2c to poll for performance information. If
you only want NPM to poll using SNMPv1, you must disable SNMPv2c on
the device to be polled.
7. If you have selected SNMPv3 as the SNMP version for the selected
node and you want to provide additional read/write community
strings, provide them in the Read/Write Community String field, as
shown in the following example:
l
RWCstring1 RWCstring2 RWCstring3
8. If you want to save the provided credentials as a credential set,

provide a Name, and then click Save.
9. Click Submit.

The Manage Nodes view is the primary user interface for device management in
the web console, and it is composed of both the node tree, a hierarchical directory
of monitored elements, in the left pane and a more detailed listing of all monitored
devices in the main pane. Devices in the main pane are grouped according to the
Group by: criterion selected in the left pane. The following sections provide steps
for customizing the Manage Nodes view.
Customizing the Manage Nodes View Node Tree

The node tree in the left pane of the Manage Nodes view provides a hierarchical
directory of the devices that are currently monitored. Devices are grouped using
any of the following criteria available in the Group by: selection field above the
node tree.
Note: Currently defined custom properties are also available as columns.
Available Grouping Criteria for the Manage Nodes View Node Tree
[No Grouping] EnergyWise
Vendor
Machine Type
Polling Engine Polling Method SNMP Version Status
205

Location
IP Version
Contact
City
Community
Comments
RWCommunity
Department
Customizing the Manage Nodes View Node List

The node list in the main pane of the Manage Nodes view provides a detailed
table listing the devices that are currently monitored. Devices in the main pane
are grouped according to the Group by: criterion selected to sort the node tree in
the left pane.
Click >> in the table header to configure any of the following types of information
as table columns:
Note: Currently defined custom properties are also available as columns.
Available Manage Nodes View Columns
IP Address
IP Version
Status
Contact
Location
Polling Method
Polling Engine City
Comments
Department
Deleting Devices from Monitoring

The following procedure deletes devices from monitoring in the web console.
Warning: Deleting nodes from monitoring in the web console automatically stops
monitoring of all applications, interfaces, and volumes on the deleted nodes. An
individual event may be recorded for each deleted network object.
Note: You can select multiple devices to delete at the same time. Additionally,
using the search tool above the node list, you can select multiple interfaces on
different nodes for simultaneous deletion.
To delete devices from monitoring in the Orion Web Console:
4. If you want to delete a node and all its applications, interfaces, and
volumes from monitoring, complete the following steps.
a. Locate the node to delete using either of the following methods:
the node you want to delete.
206

Select an appropriate Group by: criterion, and then click the appropriate group
including the node to delete.
b. Check the node to delete in the list, and then click Delete on the toolbar.
5. If you want to delete a monitored application, interface, or volume, use
the following steps.
a. Locate the element to delete using either of the following methods:
l Use the search above the node list to search your Orion database either for
the object to delete or for its parent object to delete.
Select a Group by: criteria, and then click the appropriate group including the
parent node of the object to delete.
b. If you have a list of node results, click + to expand the parent node of
the object you want to delete.
c. Check the object to delete, and then click Delete on the toolbar.
6. Click OK to confirm deletion.

Node tooltips in NPM provide immediate status overviews of monitored nodes. To
view a quick overview of any monitored node in the web console, hover over the
device name. The information in the following tables displays immediately.
Note: Orion NPM can also provide interface data in tooltips. For more information,
see Viewing Interface Data in NPM Tooltips on page1.
Node Data
Current status of the node. (up, down, warning, unmanaged, or
unreachable)
IP Address
The IP address currently assigned to the selected node
Machine Type The vendor icon and vendor description of the selected node
Average
The measured average response time of the selected node as of
Response
the last node poll
Time
The percent of all transmitted packets that are lost by the selected
Packet Loss
node as of the last node poll
The percent of available processing capacity on the selected
CPU Load
node that is currently used as of the last node poll
The percent of available memory on the selected node that is
Memory Used
currently used as of the last node poll
Node Status
207

The following procedure provides the steps required to edit monitored object
properties using the Node Management utility of the Orion Web Console.
Note: Editing multiple objects in multiple browser tabs in the same session may
result in lost data or database errors. Limit object management activities to a
single browser tab to prevent database errors and data losses.
To edit object properties in the Orion Web Console:
Nodes in the Node & Group Management grouping.
3. Locate the object to edit using either of the following methods:
either the object you want to edit or the parent node of the volume you want
to edit.
including either the node to edit or the parent of the object to edit.
4. If you want to edit the properties of a monitored node, check the node
you want to edit, click Edit Properties, and then complete the following procedure:
a. If you want to rename the node, type the new name in the Name field.
Note: Changing the node name only affects the way the node is identified on charts and graphs within System Manager and in the Orion
Web Console. It does not impact the node as it is referenced on the network.
b. If you need to change the IP address, community string, or SNMP
port type the new information in the appropriate fields.
Notes:
l
Unlike changing the name of a node, changing the IP address, community

string, or SNMP port does affect data collection. Do not change the IP
address, community string, or SNMP port in this window unless they have
changed on your network. Changing these values in this window allows
you to continue to accumulate statistics for a node without having to reconfigure the node if its IP address, community string, or SNMP port changes.
Changing the SNMP port applies to statistics polls, Universal Device Pollers, and
SNMP trap collection. For more information about custom MIBs, see Monitoring
MIBs with Universal Device Pollers in the SolarWinds Orion Network
208

Performance Monitor Administrator Guide. For more information on SNMP traps,
see Monitoring SNMP Traps in the SolarWinds Orion Network Performance
Monitor Administrator Guide.
c. If you want to dynamically assign the IP address of the selected
node, check Dynamic IP Address (DHCP or BOOTP), and then
provide the DNS Hostname and select the appropriate IP Address
Resolution format (IPv4 or IPv6) for the selected node.
Note: The IP address will be determined automatically. If the selected
device is dual-stack, IPv4 resolution will be used, by default.
d. If you are using SNMP to poll the selected node and you want to
change the SNMP version used, edit the SNMP Version and SNMP
Port fields, as appropriate.
e. If you have high-speed interfaces and you are experiencing frequent counter rollovers, you may wish to enable 64-bit counters. Confirm that the monitored device supports 64-bit counters and check the
Allow 64-bit Counters checkbox in the Node Details window.
Note: Some vendor implementations of 64-bit counters produce faulty
data. If you are experiencing erratic or incorrect data, you may wish to
disable 64-bit counters by unchecking Allow 64-bit Counters.
f. Click Test to confirm your provided SNMP settings.
g. If you want to change the existing polling intervals, provide new
intervals in the Node Status Polling and Collect Statistics Every
fields.
Note: The Node Status Polling interval is the period, in seconds,
between status checks performed by Orion NPM on the selected node.
The Collect Statistics Every field provides the interval, in minutes, on
which Orion NPM determines performance statistics for the selected
node. Default intervals for node status polling and statistics collection
are 120 seconds and 10 minutes, respectively.
h. If there are multiple polling engines in your environment and you
want to change the polling engine to which the selected node is
assigned, click Change Polling Engine, and then select a new polling
engine. For more information, see Changing Polling Engine Node
Assignments in the SolarWinds Orion Network Performance Monitor
Administrator Guide.
i. If you want to add, edit, or delete an existing dependency that
includes the selected node, click Manage Dependencies, and then
add, edit, or delete dependecies, as appropriate. For more information,
209

see Managing Dependencies in the SolarWinds Orion Network Performance Monitor Administrator Guide.
j. If you have defined custom properties for nodes within Orion NPM,
you can define the appropriate property values for the selected node in
the Custom Properties area of this page. For more information about
custom properties in Orion NPM, see Creating Custom Properties in
the SolarWinds Orion Network Performance Monitor Administrator
Guide.
k. If the selected node is a UCS Manager and you want to poll for
UCS data, check Poll for UCS, and then provide the following:
Note: After providing credentials, click Test to confirm that they are
valid for the selected UCS Manager.
l The Port on which the UCS Manager listens to managed UCS objects
l A valid User name and Password
l. If the selected node is a VMware ESX or vCenter server, check Poll
for VMware, and then either select the appropriate credential from the
Choose Credential dropdown menu or provide credentials.
Note: If you know there are VMware devices on your network that you
want to monitor, confirm that you check Poll for VMware. Nodes cannot
be identified as VMware devices unless Poll for VMware is enabled.
m. If your settings are valid and you are finished editing node properties, click Submit.
5. If you want to edit the properties of a monitored object on a node, click
+ next to the parent node of the object you want to edit, check the object
you want to edit, and then click Edit Properties.
6. If you are editing volume properties, edit the Volume Name and polling
settings, as appropriate, and then click Submit.
Note: Changing the volume name only affects the way the volume is identified on charts and graphs in the Orion Web Console. It does not impact
the volume as it is referenced on the network. The Volume Status Polling
interval is the period, in seconds, between status checks performed by
Orion NPM on the selected volume. The Collect Statistics Every field
provides the interval, in minutes, on which Orion NPM determines performance statistics for the selected volume. Default intervals for volume
status polling and statistics collection are 120 seconds and 15 minutes,
respectively.
7. If you are editing interface properties, complete the following procedure:
a. If you want to rename the interface, type the new name in the Interface Name field.
Note: Changing the interface name only affects the way the node is
210
b.
c.
d.
e.
f.
identified on charts and graphs in the Orion Web Console. It does not
impact the interface as it is referenced on the network.
If you need to designate a custom bandwidth for the selected interface, check Custom Bandwidth, and then provide required values for
Transmit Bandwidth and Receive Bandwidth.
If you want to change the existing polling intervals, provide new
intervals in the Interface Status Polling and Collect Statistics Every
fields.
Note: The Interface Status Polling interval is the period, in seconds,
between status checks performed by Orion NPM on the selected interface. The Collect Statistics Every field provides the interval, in
minutes, on which Orion NPM determines performance statistics for the
selected interface. Default intervals for node status polling and statistics
collection are 120 seconds and 9 minutes, respectively.
If you have defined custom properties for interfaces within Orion
NPM, you can define the appropriate property values for the selected
interface in the Custom Properties area of this page. For more information about custom properties in Orion NPM, see Creating Custom
Properties in the SolarWinds Orion Network Performance Monitor
Administrator Guide.
If you want to add, edit, or delete an existing dependency that
includes the selected interface, click Manage Dependencies, and
then add, edit, or delete dependecies, as appropriate. For more information, see Managing Dependencies in the SolarWinds Orion Network
Performance Monitor Administrator Guide.
If your settings are valid and you are finished editing node properties, click Submit.

After adding a node to the Orion database as an ICMP only node, you may need
to promote the node to SNMP to start collecting additional statistics. The Node
Management utility of the Orion Web Console can easily promote your node to
SNMP without any loss of historical data.
To promote an ICMP only node to SNMP:
1. Log in to the Orion Web Console as an administrator, and then click Settings in the top right of the web console.
211

3. Locate the device to promote using either of the following methods:
the node you want to promote.
including the node to promote.
4. Click Edit Properties, and then clear ICMP (Ping only).
5. In the SNMP area, select the SNMP Version for the promoted node.
Note: Orion uses SNMPv2c by default. If the promoted device supports or
requires the enhanced security features of SNMPv3, select SNMPv3.
6. If you have installed multiple polling engines, select the Polling Engine
you want to use to collect statistics from the added node.
Note: This option may not be available if you are only using one polling
engine to collect information from your network.
7. If the SNMP port on the added node is not the Orion default of 161,
8. If the added node supports 64 bit counters and you want to use them,
check Allow 64 bit counters.
Note: Orion fully supports the use of 64-bit counters; however, these high
capacity counters can exhibit erratic behavior depending how they are
used. If you notice peculiar results when using these counters, use the Edit
Properties view to disable the use of 64-bit counters on the device in question, and then contact the hardware manufacturer.
9. If you want to use SNMPv2c to monitor the promoted node, provide
valid community strings for the added node.
Note: The Read/Write Community String is optional, but Orion does
require the public Community String, at minimum, for node monitoring.
10. If you want to use SNMPv3 to monitor the promoted node, provide the
following SNMPv3 credential settings:
Note: Read/Write SNMPv3 Credentials are optional, but the public Community String is required, at a minimum, for node monitoring.
l SNMPv3 Username and Context
l SNMPv3 Authentication Method and Password/Key
l SNMPv3 Privacy/Encryption Method and Password/Key
11. If you want to edit an existing SNMPv3 credential set, select the name
of your set from the Saved Credential Sets list, and then edit the settings.
12. If you want save the provided SNMPv3 credentials as a credential set,
provide a Name for your new credential set, and then click Save.
212

13. Click Validate SNMP after entering all required credentials to confirm your
SNMP settings.
14. If you want to change the default polling settings for your promoted
node, edit the Node Status Polling or Collect Statistics Every values in
the Polling area, as appropriate.
Note: The Node Status Polling value refers to the period of time, in
seconds, between the node status checks Orion performs on the promoted
node. The Collect Statistics Every value refers to the period of time
between updates Orion makes to displayed statistics for the promoted
node.
15. If you have defined any custom properties for monitored nodes,
provide appropriate values for the promoted node in the Custom Properties.
16. Click Submit when you have completed properties configuration for your
promoted node.
17. If you have successfully added the node, click OK on the dialog.

After adding a node to the Orion database as an ICMP only node, you may need
to promote the node to WMI to start collecting additional statistics. The Node
Management utility of the Orion Web Console can easily promote your node to
WMI without any loss of historical data.
Note: Once you promote a node from ICMP to WMI, you cannot go back to polling
via ICMP.
To promote an ICMP only node to WMI:
2. Click Settings in the top right of the web console and then click Manage
Nodes in the Node & Group Management grouping of the Orion Website
3. Locate the device to promote using either of the following methods:
the node you want to promote.
Select an appropriate Group by criteria, and then click the appropriate group
including the node to promote.
4. Click Edit Properties, and then select Windows Servers: WMI and ICMP.
5. Provide existing WMI credentials, or create new credentials.
6. If you want to verify your credentials, click Test.
213

7. If you want to change the default polling settings for your promoted
node, edit the Node Status Polling or Collect Statistics Every values in
the Polling area, as appropriate.
Note: The Node Status Polling value refers to the period of time, in
seconds, between the node status checks Orion performs on the promoted
node. The Collect Statistics Every value refers to the period of time
between updates Orion makes to displayed statistics for the promoted
node.
8. If you have defined any custom properties for monitored nodes,
provide appropriate values for the promoted node in the appropriate Custom Properties fields.
9. Click Submit when you have completed properties configuration for your
promoted node.
10. If you have successfully added the node, click OK.
Viewing Node Resources

The List Resources feature of the Orion Web Console Node Management utility
allows you to immediately see all monitored interfaces, volumes, and interface
charts on a selected node, as shown in the following procedure.
To view a list of all resources present on a node:
4. Locate the node to view using either of the following methods:
the node you want to view.
including the node to view.
5. Check the node you want to view from the list, and then click List
Resources on the Node Management toolbar.
Setting Device Management States

Monitored devices are regularly polled for operational status. Collected statistics
are displayed in the Orion Web Console. Using the Node Management feature of
the Orion Web Console, the management status of monitored nodes, is easily set
214

or changed, allowing you to either temporarily suspend data collection or resume
polling and statistics collection, as necessary. The following procedure sets or
changes management states for monitored nodes in the Orion Web Console.
Note: Setting a node to an unmanaged state automatically suspends the
management of all interfaces and volumes on the selected node.
To set or change the management state of a node:
4. Locate the node to manage using either of the following methods:
the device you want to manage.
Select an appropriate Group by: criteria, and then click the appropriate group
including the node to manage.
5. Check the node to change, and then click Unmanage or Remanage, as
appropriate, for the selected node.
6. If you have selected Unmanage, provide start and end times and dates
for your management suspension, and then click OK.

If there are multiple Orion polling engines in your environment, node assignments
may be changed directly from the Manage Nodes view. For more information, see
Changing Polling Engine Node Assignments on page1.
Unscheduled Device Polling and Rediscovery

NPM polls devices for statistics and status regularly, according to the polling
settings available for configuration on the Polling Settings view in the Orion Web
Console. For more information, see Orion Polling Settings on page1.
Sometimes, however, it may be necessary to conduct an unscheduled poll or
rediscovery of a monitored device, as shown in the following procedure.
To perform an unscheduled poll or rediscovery:
2. Click Manage Nodes in the Node & Group Management grouping.
215

3. Locate and check the node or interface you want to poll or locate and
check the node to rediscover, using either of the following methods:
l Use the search tool above the node list to search your Orion database.
Select an appropriate Group by: criteria, and then click the appropriate group
including either the node or interface you want to poll or the node you want to
rediscover.
4. If you want to poll the selected node or interface, click More Actions>
Poll Now.
5. If you want to rediscover the selected node, click More Actions>
Rediscover.
Monitoring Windows Server Memory

When NPM polls a Windows server for CPU load and memory utilization, it pulls
the amount of physical memory to define the 100% level, and then it totals the
amount of memory in use by each allocation to compute what percentage of the
physical memory is in use. This can result in memory utilization readings over
100%, as many applications pre-allocate memory and swap before it is actually
needed. To work around this, you can also add physical memory as a volume for
these servers within Orion. When monitored as a volume, the values will be more
in line with your expectations.
Scheduling a Node Maintenance Mode Time

Period
When you need to perform maintenance on a node or its components, such as
upgrading firmware, installing new software, or updating security, you may want
to discontinue polling while the device is down for maintenance. Disabling
polling, or setting a node status as Unmanaged, while performing node
maintenance, maintains the accuracy of your data and prevents unnecessary alert
messages. For more information, see Setting Interface Management States on
page1.
216
Scheduling a Node Maintenance Mode Time Period
217
Chapter 14: Managing Groups and

DependenciesCore
Dependencies and groups enable you to more effectively manage your network.
Groups give you the ability to logically organize monitored objects, regardless of
device type or location, and dependencies allow you to more faithfully represent
what can actually be known about your network, eliminating false positive alert
triggers and providing more accurate insight into the state of your network.
Managing Groups
Groups contain Orion objects that report a status such as nodes, volumes,
applications, interfaces, and even other groups. You create, delete, and modify
groups from the Manage Groups page.
Note: Nesting a group within another does not create a strict parent/child
relationship. You can include any group as a member in any number of other
groups.
To access the Manage Groups page:
1. Log on to the Orion Web Console.
3. Click Manage Groups in the Node & Group Management grouping of the
The following sections provide more information about creating and managing
groups in Orion:
l
l
l
l
l
Creating Groups
Deleting Groups
Creating Groups
Creating a group is a straightforward process of selecting the Orion objects you
want the group to contain. At creation time, you can also decide how you want
218

SolarWinds Orion to roll up the status of the group members.
It is also possible to specify group members on the basis of shared properties by
adding them with a dynamic query. Orion objects added through dynamic queries
are automatically added or removed from the group.
To create a new group:
4. Click Add New Group.
5. Enter a name for the group in the Name field, and then expand Advanced.
6. If you want the group to roll up the worst status of the group
members, select Show Worst Status.
7. If you want the group to roll up the best status of the group members,
select Show Best Status.
8. If you want the group to display a warning status if the group members have a mixture of different statuses, select Mixed Status shows
warning.
9. Click Next.
10. If you want to individually select group members, follow these steps:
a. In the Show Only list, select the type of Orion object you want to add as
a group member.
b. Check the checkbox of the Orion object and then click Add to Group.
11. If you want to dynamically select group members based on shared
properties, follow these steps:
a. Click Add dynamic query.
b. Type a name for the query in the Dynamic query object name field.
c. Select an Orion object type in the Orion Object is list.
d. Click Add Condition to specify further selection properties.
Note: Use the question mark (?) character as a multiple character wildcard. Use the underscore (_) character as a single character wildcard.
e. Click Preview to verify that the dynamic query is selecting your intended objects.
f. Click Save.
12. Continue adding individual Orion objects or dynamic queries until you
have finished building your group.
13. Click Create Group.
219

You can edit the properties of an existing group or add and remove objects.
These are separate editing tasks.
To edit properties of an existing group:
4. Check the group you want to edit, and then click Edit Properties.
5. Edit the Name and Description of the selected group, as appropriate.
6. If you want to manage the members of the selected group, click Add &
Remove Objects. For more information about managing group members,
see Managing Group Members on page1.
Note: Expand the Contains summary for the selected group to see all
member objects in the group.
7. If you want to configure the calculation of displayed group status or
the frequency with which group status is refreshed, expand
Advanced, select a Status rollup mode, and then provide a Refresh frequency.
Note: For more information about status rollup for groups, see Managing
the Display of Group Status on page1.
8. Click Submit.

The following procedure manages the objects included within a defined group.
To add and remove the objects of an existing group:
Groups in the Node & Group Management grouping of the Orion Website
3. Check the group you want to edit, and then click Add & Remove Objects.
Deleting Groups
Deleting an existing dependency is a straightforward process, as shown in the
To delete a group:
220

3. Check the group you want to delete, and then click Delete.

The status of any particular group is determined by the status of the members of
the group. There are three methods for determining the status displayed for a
selected group of monitored objects:
Note: For more information about object states, see Status Icons and Identifiers
on page1.
l
Show Best Status is most useful for displaying groups that are
defined as collections of redundant or backup devices. The following
table indicates how the Show Best Status option operates:
Note: Compare Group Status results under the Show Best Status option
with results for the same groups of objects under the Show Worst Status
option.
Object States
Group Status
(Up, Warning, Down)
(Up)
(Warning, Down)
(Up)
(Warning, Down, Unknown) (Warning)
Show Worst Status ensures that the worst status in a group of objects is
displayed for the whole group. The following table indicates how the Show
Worst Status option operates:
Object States
Group Status
(Up, Warning, Down)
(Down)
(Warning, Down)
(Warning)
(Warning, Down, Unknown) (Down)
l
Mixed Status shows Warning ensures that the status of a group displays
the worst warning-type state in the group. If there are no warning-type
states, but the group contains a mix of up and down states, then a Mixed
Availability ( ) warning status is displayed for the whole group. The following table indicates how the Mixed Status shows Warning option operates:
221
Object States Group Status
(Critical)
(Critical)
(Mixed Availability)
The following procedure configures the method used to determine group status.
To configure the method used to determine the status of a selected group:
3. Check the group you want to edit, and then click Edit Properties.
4. Expand Advanced, and then select a Status rollup mode, as follows:
a. If you want the group to roll up the worst status of the group members, select Show Worst Status.
b. If you want the group to roll up the best status of the group members, select Show Best Status.
c. If you want the group to display a warning status if the group members have a mixture of different statuses, select Mixed Status
shows warning.
5. Click Submit.
Dependencies in Orion allow you to account for topological constraints on your
network. These constraints may be either the result of the design of a specific
device, as in the case of interfaces on a switch or router, or the result of the
physical architecture of your network itself. Orion offers an Unreachable status to
account for the case when a device may appear to be down when its status is
actually indeterminate, due to another device being down or unresponsive.
For example, in the case of a switch monitored normally by Orion NPM, when the
switch itself goes down or becomes unresponsive, all interfaces on the switch will
also be unresponsive, even though they may functioning perfectly well. By
default, in Orion NPM these child interfaces display as Unreachable because
their parent node is reporting as down.
Likewise, Orion also makes it possible to define dependencies among distinct
devices, as in the case of a subnet of devices on your network that depends on a
222

single WAN link to connect with the rest of your network. In this case, if you have
defined a group consisting of the devices in this dependent subnet, you can then
define a dependency where the dependent subnet is a child group to the parent
router that is serving as the WAN link to the rest of your network. For more
information about groups, see Managing Groups on page1.
The power of dependencies becomes evident when considering alerts. If you
have an alert configured to trigger when a monitored object is down, you only
want that alert to trigger if a monitored object is positively down. In other words,
you do not want an down object alert to trigger for an object that is not actually
down. Without dependencies, all monitored objects on a monitored node that is
unresponsive to ICMP queries will also report as down. With dependencies in
use, these child objects will instead display as Unreachable, saving you the
hassle of sorting through numerous false alerts resulting from the failure of a
single node to respond promptly to a status query.
Note: Interfaces may be defined as parent objects, but they cannot be defined as
child objects. Orion NPM determines interface status directly by polling parent
nodes. If the node on which an interface exists goes down, Orion NPM
automatically reports any and all interfaces on that node as unreachable.
The following table provides currently valid parent-child dependency
relationships:
Parent Node Group Node Interface Interface
Child Node Node Group Node
Group
Creating a New Dependency

Creating a new dependency is a straightforward process of selecting the parent
and children objects, as shown in the following procedure.
To create a new dependency:
Dependencies in the Node & Group Management grouping of the Orion
Website Administration page.
3. Click Add new dependency.
4. On the Select Parent page, complete the following steps:
a. Use the Show only: and Group by: selection fields to customize the
list of displayed objects and groups.
Note: The properties listed in the Group by: selection field are
223

dynamic.
b. Select the parent object or group in the main pane, and then click Next.
Note: If you want to define a dependency so that the reported states of
child objects are dependent on the status of multiple parent objects, create a group including all parent objects, and then select it on this view.
For more information, see Creating Groups on page1.
5. On the Choose Child page, complete the following steps:
a. Edit the Dependency name, as appropriate.
b. Use the Show only: and Group by: selection fields to customize the
Note: Properties listed in the Group by: selection field are dynamically
dependent on the selection in the Show only: field.
c. Select the child object or group in the main pane, and then click Next.
multiple child objects are dependent on the status one or more parent
objects, create a group including all child objects, and then select it on
this view. For more information, see Creating Groups on page1.
6. On the Review Dependency view, review the current settings for the configured dependency.
Notes:
l If any advanced alerts are configured on parent or child objects, they will
be listed on this view. Click + to expand alert details.
In the event that a parent object is down, alerts configured on any child objects in
a dependency will not trigger because the child object status is Unreachable.
7. Click Submit to accept the dependency definition.

Editing an existing dependency is a straightforward process, as shown in the
To edit an existing dependency:
3. Click Manage Dependencies in the Node & Group Management grouping
of the Orion Website Administration page.
4. Check the dependency you want to edit, and then click Edit.
5. On the Select Parent page, complete the following steps:
a. Use the Show only: and Group by: selection fields to customize the
224

b. Select the parent object or group in the main pane, and then click Next.
child objects are dependent on the status of multiple parent objects, create a group including all parent objects, and then select it on this view.
For more information, see Creating Groups on page1.
6. On the Choose Child page, complete the following steps:
a. Edit the Dependency name, as appropriate.
b. Use the Show only: and Group by: selection fields to customize the
c. Select the child object or group in the main pane, and then click Next.
multiple child objects are dependent on the status one or more parent
objects, create a group including all child objects, and then select it on
this view. For more information, see Creating Groups on page1.
7. On the Review Dependency view, review the current settings for the configured dependency.
Notes:
l If any advanced alerts are configured on parent or child objects, they will
be listed on this view. Click + to expand alert details.
If a parent object is down, all alerts configured on any child objects in a
dependency on the down parent object are automatically suppressed.
8. Click Submit to accept the dependency definition.
Deleting an Existing Dependency

Deleting an existing dependency is a straightforward process, as shown in the
To delete an existing dependency:
Dependencies in the Node & Group Management grouping of the Orion
3. Check the dependency you want to delete, and then click Delete.
4. Click Yes to confirm deletion of the selected dependency.
225

In the event that a parent object is down, all advanced alerts configured on any
child objects in a dependency on the down parent object are automatically
suppressed. The following procedure displays all advanced alerts currently
configured on any child objects in a selected dependency.
To view alerts on child objects in a selected dependency:
3. Click Manage Dependencies in the Node & Group Management grouping
of the Orion Website Administration page.
4. Check the dependency that includes the child object on which the alerts
you want to view are configured, and then click Alerts on Child.
226
Chapter 15: Managing Web

AccountsCore
Orion Web Console user accounts, permissions, and views are established and
maintained with the Orion Account Manager. When Advanced Customization is
enabled on the Orion Website Settings page, you can use Account Manager to
customize menu bars and views for different users. For more information about
Orion Website Settings and Advanced Customization, see Orion Web Console
and Chart Settings on page1.
Notes:
l
This guide assumes that Advanced Customization has been enabled. If it

has not been enabled, the range of options available on the pages referenced in the following sections is much more limited. For more information, see Orion Website Administration on page1.
To prevent issues with web console accounts, your SQL Server should not
be configured with the no count connection option enabled. The no count
option is set in the Default connection options area of the Server
Properties> Connections window of SQL Server Management Studio
Creating New Accounts

New web console user accounts may be created by web console administrators.
Note:To maintain administrative privileges, Windows individual and group user
accounts must be defined in the same domain as the SolarWinds server to which
they are given access.
To create a new user account:
2. Click Manage Account in the Accounts grouping of the Orion Website
Administration page, and then click Add New Account.
3. Select the type of account you want to add, and then click Next.
4. If you selected Orion individual account, complete the following steps:
a. Provide a User Name and a Password for the Orion individual
account.
227

b. Confirm the password, and then click Next.
c. Define user settings and privileges, as appropriate. For more information, see Editing User Accounts on page1.
5. If you selected Windows individual account, complete the following
steps:
a. Provide the User Name and Password for a user that has administrative access to your Active Directory or local domain.
b. In the Search for Account area, enter the User name of the Active Directory or local domain user for whom you want to create a new web console account, and then click Search.
c. In the Add Users area, select the users for whom you want to create
new web console accounts, and then click Next.
6. If you selected Windows group account, complete the following steps:
a. Provide the User Name and Password for a user that has administrative access to your Active Directory or local domain.
b. In the Search for Account area, enter the Group name of the Active Directory or local domain group for which you want to create a new web
console account, and then click Search.
c. In the Add Users area, select the users for whom you want to create
new web console accounts, and then click Next.
When the new account is created, the Edit User Account view displays, showing
all configurable account options. For more information about editing account
settings, see Editing User Accounts on page1.
Note: For more information about using Windows Pass-through security, Active
Directory, and DirectLink accounts for automatic login to the Orion Web Console,
see Configuring Automatic Login on page1.
Editing User Accounts

The Edit User Account page provides options for configuring web console user
accounts. On the Edit User Account page, administrators can disable an account,
set an account expiration date, grant administrator and node management rights,
set user view limitations, define a default menu bar, and set several other defaults
defining how a user account views and uses the Orion Web Console.
Note: To reset a password, click Change Password at the bottom of the page.
The following sections and procedures detail the configuration of user accounts.
l
l
l

228

l
l
l


The following procedure is a guide to setting user account access.
To edit a user account:
3. Click Manage Accounts in the User Accounts grouping of the Orion Website Administration page.
4. Select the account that you want to edit, and then click Edit.
5. Set Account Enabled to Yes or No, as appropriate.
Note: Accounts are enabled by default, and disabling an account does not
delete it. Account definitions and details are stored in the Orion database
in the event that the account is enabled at a later time.
6. If you want the account to expire on a certain date, click Browse ()
next to the Account Expires field, and then select the account expiration
date using the calendar tool.
Note: By default, accounts are set to Never expire. Dates may be entered
in any format, and they will conform to the local settings on your computer.
7. If you want to allow the user to remain logged-in indefinitely, select
Yes for the Disable Session Timeout option.
Note: By default, for added security, new user accounts are configured to
timeout automatically.
8. If you want to grant administrator rights to the selected account, set
Allow Administrator Rights to Yes.
Notes:
Administrator rights are not granted by default, but they are required to create, delete, and edit accounts. User accounts without administrator rights
cannot access Admin page information.
l Granting administrator rights does not also assign the Admin menu bar to a
user. If the user requires access to Admin options, they must be assigned
the Admin view. For more information, see Setting Default Account Menu
Bars and Views on page1.
9. If you want to allow the user to manage nodes directly from the Orion
Web Console, set Allow Node Management Rights to Yes.Note: By
default, node management rights are not granted. For more information
l
229
10.
11.
12.
13.
14.
15.
about node management in the Orion Web Console, see Monitoring

Devices in the Web Console on page1.
If you want to allow the user to edit and manage reports directly from
the Orion Web Console, set Allow Report Management Rights to
Yes.Note: By default, report management rights are not granted. For more
information about reports in the Orion Web Console, see Creating Reports
in the Web Console on page1.
If you want to allow the user to customize views, set Allow Account to
Customize Views to Yes.
Note: By default, customized view creation is not allowed. Changes made
to a view are seen by all other users that have been assigned the same
view.
Designate whether or not to Allow Account to Clear Events and
Acknowledge Alerts.
Select whether or not to Allow Browser Integration.
Note: Browser integration can provide additional functionality, including access to right-click menu options, depending on client browser
capabilities.
If you want to enable audible alerts through the client browser, select
a sound from the Alert Sound list.
Note: By default, sounds are stored in the Sounds directory, located at
C:\Inetpub\SolarWinds\NetPerfMon\Sounds. Sounds in .wav format that are
added to this directory become available as soon as the Edit User Account
page refreshes.
Provide the maximum Number of items in the breadcrumb list.
Note: If this value is set to 0, all available items are shown in breadcrumb
dropdown lists.

Account limitations may be used to restrict user access to designated network
areas or to withhold certain types of information from designated users. The
following procedure sets user account limitations.
To set user account limitations:
Accounts in the Accounts group of the Orion Website Administration
page.
3. If you want to limit an individual user account, complete the following
steps:
230

a.
b.
c.
d.
On the Individual Accounts tab, check the account you want to limit.
Click Edit.
Click Add Limitation in the Account Limitations section.
Select the type of limitation to apply, and then click Continue.
Notes:
Because Orion NetFlow Traffic Analyzer (NTA) initially caches account limitations, it may take up to a minute for account limitations related to Orion
NTA to take effect in Orion NTA.
l Account limitations defined using the Account Limitation Builder display as
options on the Select Limitation page. Account limitations can be defined
and set using almost any custom properties. For more information, see Setting Account Limitations on page230.
e. Define the limitation as directed on the Configure Limitation page that
follows. For more information about defining pattern-type limitations,
see Defining Pattern Limitations on page1.
4. If you want to limit an group account, complete the following steps:
Note: Limitations applied to a selected group account only apply to the
group account and not, by extension, to the accounts of members of the
group.
a. On the Groups tab, check the group account you want to limit.
b. Click Edit.
c. Click Add Limitation in the Account Limitations section.
d. Select the type of limitation to apply, and then click Continue.
l
Notes:
Because Orion NetFlow Traffic Analyzer (NTA) initially caches account limitations, it may take up to a minute for account limitations related to Orion
l Account limitations defined using the Account Limitation Builder display as
and set using almost any custom properties For more information, see Setting Account Limitations on page230.
e. Define the limitation as directed on the Configure Limitation page that
follows. For more information about defining pattern-type limitations,
see Defining Pattern Limitations on page1.
5. Click Add Limitation in the Account Limitations section.
6. Select the type of limitation to apply from the list, and then click Continue.
l
Notes:
231

Account limitations defined using the Account Limitation Builder display as
and set using almost any custom properties. For more information, see Setting Account Limitations on page230.
l Because Orion NetFlow Traffic Analyzer (NTA) initially caches account limitations, it may take up to a minute for account limitations related to Orion
7. Define the limitation as directed on the Configure Limitation page that follows. For more information about defining pattern-type limitations, see
Defining Pattern Limitations on page1.
l

Pattern limitations may be defined using OR, AND, EXCEPT, and NOT operators
with _ and * as wildcard characters. The following examples show how to use
available operators and wildcard characters:
Note: Patterns are not case sensitive.
l
l
foo matches only objects named "foo".

foo_ matches all objects with names consisting
of the string "foo" followed

by only one additional character, like foot or food, but not seafood or football.
foo* matches all objects with names starting with the string "foo", like football or food, but not seafood.
*foo* matches all objects with names containing the string "foo", like seafood
or Bigfoot.
*foo* OR *soc* matches all objects containing either the string "foo" or the
string "soc", including football, socks, soccer, and food.
*foo* AND *ball* matches all objects containing both the string "foo" and the
string "ball", including football but excluding food.
*foo* NOT *ball* matches all objects containing the string "foo" that do not
also contain the string "ball", including food but excluding football.
*foo* EXCEPT *ball* matches all objects containing the string "foo" that do not
also contain the string "ball", including food but excluding football.
You may also group operators using parentheses, as in the following example.
(*foo* EXCEPT *b*) AND (*all* OR *sea*) matches seafood and footfall, but not football
or
Bigfoot.

The Default Menu Bar and Views section provides several options for configuring
the default menu bar and views for your user account. The following procedure is
232

a guide to setting these options.
To set default menu bar and view options:
Accounts in the Accounts grouping of the Orion Website Administration
page.
3. Select the account that you want to configure, and then click Edit.
4. Scroll down to Default Menu Bar and Views.
5. Select a Home Tab Menu Bar from the available list.
Note: This is the default menu bar displayed when you click Home in the
Orion Web Console. If you are editing a user account that must have administrator privileges, set the Home Tab Menu Bar to Admin.
6. Select a Network Tab Menu Bar from the available list.
Note: This is the default menu bar displayed when you click Network in
the Orion Web Console. If you are editing a user account that must have
administrator privileges, select Admin.
7. Select a Virtualization Tab Menu Bar from the available list.
Note: This is the default menu bar displayed when you click Virtualization
in the Orion Web Console. If you are editing a user account that must have
administrator privileges, select Admin.
8. If you have installed any additional Orion modules, select an Orion Module
Tab Menu Bar from each available list.
Note: This step configures the default menu bar displayed when you click
the tab corresponding to an installed module in the Orion Web Console. If
you are editing an account that must have administrator privileges, select
Admin.
9. Select a Home Page View.
Note: If no Home Page View is specified, the default is designated to be
the same as the page that is specified in the Default Summary View field
below.
10. If the Home Page View you have selected refers to a specific network
device, select a Default Network Device by clicking Edit and selecting
from the list of available devices on the next page.
Note: If the Home Page View you have selected does not require a specific network device, Orion will select a device to display, automatically.
11. Select a Default Summary View for the account.
Note: This is typically the same as the Home Page View.
12. If you want all reports to be available for the account, select \Reports
from the Report folder list in the Default Menu Bars and Views area.
Note: If you are creating a new user, you must designate the Report
233

Folder the new account is to use to access Orion reports. By default, no
report folder is configured for new users.The Reports directory is located in
the NPM installation directory: C:\ProgramFiles\SolarWinds\Orion\.
13. If you want to designate default Node, Volume, and Group Details
Views for this account, expand Orion General Settings, and then select
appropriate Node Detail, Volume Detail, and Group Detail Views.
14. If you want to designate default Virtualization Summary Manager,
Cluster Details, and Datacenter Details Views for this account, expand
Integrated Virtual Infrastructure Monitor Settings, and then select appropriate default views.
15. Click Submit.

Reports may be assigned to an account by creating sub-directories within the
Reports directory. Desired reports are included within the sub-directory, and the
sub-directories are then made available for assignment to an account. This
provides a level of security when reports are included in a view or added as
custom menu items. For more information, see Creating and Editing External
Website Views on page1.
To configure an account report folder:
Accounts in the Accounts group of the Orion Website Administration
page.
3. Select the account you want to configure, and then click Edit.
4. If you want all reports to be available for the account, select \Reports
from the Report folder list in the Default Menu Bars and Views area.
Note: If you are creating a new user, you must designate the Report
Folder the new account is to use to access Orion reports. By default, no
report folder is configured for new users.The Reports directory is located in
the NPM installation directory: C:\ProgramFiles\SolarWinds\Orion\.
5. Click Submit.

When browsing the Orion Web Console, audible alerts can be sounded
whenever new alerts are generated. When enabled, you will receive an audible
alert the first time, after login, that an alert is displayed on the page. This alert may
234

come from either an alert resource or the Alerts view. You will not receive audible
alerts if the Alerts view or the alert resource you are viewing is empty.
Following the initial alert sound, you will receive an audible alert every time an
alert is encountered that was triggered later than the latest alert that has already
been viewed.
For example, a user logs in and sees a group of alerts with trigger times ranging
from 9:01AM to 9:25AM, and the user receives an audible alert. If the user
browses to a new page or allows the current page to auto-refresh, a new alert
sounds if and only if an alert triggered later than 9:25AM is then displayed.
To enable audible web alerts:
3. Click Manage Accounts in the Accounts grouping of the Orion Website
4. Select the account you want to configure.
5. Click Edit.
6. Select the sound file you want to play when new alerts arrive from the Alert
Sound list.
Note: By default, sounds are stored in the Sounds directory, located at
C:\Inetpub\SolarWinds\NetPerfMon\Sounds. Sounds in .wav format that are
added to this directory become available as soon as the Edit User Account
page refreshes.
7. Click Submit.
235
236
Chapter 16: Managing Orion Polling

EnginesCore
To ensure that your polling engines are optimized to run at peak performance,
you will need to occasionally tune them. If you use more than one polling engine,
you will need to balance the load so that each engine can perform optimally.
Viewing Polling Engine Status in the Web Console

The Orion Web Console provides the Polling Engines view, giving you immediate
insight into the performance of all polling engines in your Orion installation.
To display the Polling Engine view:
2. Click Polling Engines in the Details group.
For more information about configuring the settings, see Configuring Polling
Engine Settings on page1.
Configuring Polling Engine Settings

Settings for your Orion polling engine are configured on the Orion Polling Settings
view within the Orion Web Console.
To open the Orion Polling Settings view:
2. Click Polling Settings in the Settings group.
For more information, see "Orion Polling Settings" on page1.
Orion Polling Settings

The following poller settings are configurable on the Orion Polling Settings view.
Note: Depending on the Orion products and modules you have installed,
237

additional Polling Settings may be available. For more information about
module-specific polling settings, see the Administrator Guide for your Orion
product.
l
l
l
l
l
l
Polling Intervals
Database Settings
Network
Polling Intervals
The following settings configure default polling intervals. To apply poller settings,
click ReApply Polling Intervals.
Default Node Poll Interval
Devices are regularly polled to determine status and response time on this
designated interval. By default, this interval is 120 seconds.
Default Volume Poll Interval
Volumes are regularly polled to determine status and response time on this
designated interval. By default, this interval is 120 seconds.
Default Rediscovery Interval
Your entire network is polled on this interval to detect any re-indexed
interfaces. Monitored network devices are also checked for IOS upgrades
permitting EnergyWise support. By default, this interval is 30 minutes.
Note: In Orion products released prior to Orion NPM version 10.1, the
minimum interval allowed is 1 minute. Beginning with Orion NPM version
10.1, the minimum rediscovery interval is 5 minutes. Polling interval settings
may not be submitted if the default rediscovery interval is not set to at least 5
minutes.
Lock custom values
This option is enabled by default. When enabled, all polling customizations
made on the Orion Polling Settings view are automatically saved.

The following settings configure default polling intervals for device statistics. To
apply poller settings, click ReApply Polling Statistic Intervals.
Note: Depending on the Orion products and modules you have installed,
238

additional Polling Settings may be available. For more information about any
module-specific polling settings, see the Administrator Guide for your Orion
product.
Default Node Statistics Poll Interval
Device performance statistics are regularly polled on this interval. By
default, this interval is 10 minutes.
Default Volume Statistics Poll Interval
Volume performance statistics are regularly polled on this interval. By
default, this interval is 15 minutes.

Select the default IP address version (IPv4 or IPv6) to use when resolving the
address of any monitored dual stack devices.
Note: A dual stack device is capable of providing IP addresses in both IPv4 and
IPv6 formats.
Database Settings
The following options configure Orion database maintenance and retention
settings.
Note: Changes to database maintenance and retention settings do not take effect
until the SolarWinds Network Performance Monitor service is restarted.
Archive Time
The Archive Time is the time of day when Orion database maintenance
occurs. For more information, see Database Maintenance on page1.
Auditing Trails Retention
If your SolarWinds product is capable of retaining user audit information,
this setting indicates the length of time that individual audit events are
retained in the SolarWinds database. By default, this retention period is 365
days.
Detailed Statistics Retention
All statistics collected on any basis shorter than 1 hour are summarized into
hourly statistics after the period of time designated as the Detailed Statistics
Retention period. By default, this period is 7 days.
Hourly Statistics Retention
239

All statistics collected on any basis shorter than 1 day but longer than 1 hour
are summarized into daily statistics after the period of time designated as
the Hourly Statistics Retention period. By default, this period is 30 days.
Daily Statistics Retention
All statistics in the Orion database that are collected on a daily basis are
kept for this designated period of time. By default, this period is 365 days.
Detailed Interface Availability Statistics Retention
All interface availability statistics collected on any basis shorter than 1 hour
are summarized into hourly statistics after the period of time designated as
the Detailed Interface Availability Statistics Retention period. By default, this
period is 7 days.
Hourly Interface Availability Statistics Retention
All interface availability statistics collected on any basis shorter than 1 day
but longer than 1 hour are summarized into daily statistics after the period of
time designated as the Hourly Interface Availability Statistics Retention
period. By default, this period is 30 days.
Daily Interface Availability Statistics Retention
All interface availability statistics in the Orion database that are collected on
a daily basis are kept for this designated period of time. By default, this
period is 365 days.
Detailed Wireless Statistics Retention
All wireless statistics collected on any basis shorter than 1 hour are
summarized into hourly statistics after the period of time designated as the
Detailed Wireless Statistics Retention period. By default, this period is 7
days.
Hourly Wireless Statistics Retention
All wireless statistics collected on any basis shorter than 1 day but longer
than 1 hour are summarized into daily statistics after the period of time
designated as the Hourly Wireless Statistics Retention period. By default,
this period is 30 days.
Daily Wireless Statistics Retention
All wireless statistics in the Orion database that are collected on a daily
basis are kept for this designated period of time. By default, this period is
365 days.
240
Database Settings
Detailed UnDP Statistics Retention
All Universal Device Poller statistics collected on any basis shorter than 1
hour are summarized into hourly statistics after the period of time
designated as the Detailed Universal Device Poller Statistics Retention
period. By default, this period is 7 days.
Hourly UnDP Statistics Retention
All Universal Device Poller statistics collected on any basis shorter than 1
day but longer than 1 hour are summarized into daily statistics after the
period of time designated as the Hourly Universal Device Poller Statistics
Retention period. By default, this period is 30 days.
Daily UnDP Statistics Retention
All Universal Device Poller statistics in the Orion database that are
collected on a daily basis are kept for this designated period of time. By
default, this period is 365 days.
Events Retention
All network events data is deleted from the Orion database after the period
of time designated by the Events Retention has passed after the event
ending time. By default, this period is 30 days.
Syslog Messages Retention
All received Syslog messages are kept for the period of time designated. By
Trap Messages Retention
All received trap messages are kept for the period of time designated. By
Max Alert Execution Time
If it takes longer than the value specified here for an alert to execute, Orion
will disable the alert. Alert execution time includes the amount of time
required to trigger any configured alert actions.
Alert Acknowledge Url Text
When an alert is triggered, the generic text in this field is displayed as a link
to acknowledge the triggered alert.
Allow alert actions for unmanaged objects
241

With this option enabled, the SolarWinds Alerting Engine will execute all
alert actions for all objects that meet the conditions specified in the alert
configuration, even if any of these network objects are in an unmanaged
window.
Discovery Retention
All configured discovery profiles are kept for the period of time designated.
By default, this period is 60 days. For more information about discovery
profiles, see Discovering and Adding Network Devices on page1.
Network
The following settings configure ICMP and SNMP requests.
ICMP Timeout
All ICMP (ping) requests made by the Orion poller time out if a response is
not received within the period designated. By default, this period is 2500ms.
ICMP Data
This string is included within all ICMP packets sent by Orion.
SNMP Timeout
All SNMP requests made by the Orion poller time out if a response is not
received within the period designated. By default, this period is 2500ms.
SNMP Retries
If a response to an SNMP poll request made by the Orion poller is not
received within the configured SNMP Timeout, the Orion poller will conduct
as many retries as designated by this value. By default, this value is 2.
UCS API Timeout
All UCS API requests made by the Orion poller time out if a response is not
received within the period designated. By default, this period is 240
seconds.
Perform reverse DNS lookup
If you want NPM to perform reverse DNS lookups on monitored DHCP
nodes, confirm that this option is checked. By default, reverse DNS lookup
for DHCP nodes is enabled.
Hide unknown connections in topology
242

With this option enabled, if the source or destination interface of a network
connection is unknown, SolarWinds will neither map nor store the
connection.

The following settings designate methods for calculating availability and
transmission rate baselines, select the NPM node warning level and counter type,
and indicate security preferences for community strings and other potentially
sensitive information in the web console.
Availability Calculation (advanced)
This setting designates the type of calculation NPM performs to determine
device availability. For more information, see Calculating Node Availability
on page1.
Baseline Calculation (advanced)
Upon startup, Orion can calculate a baseline for the transmission rates of
the various elements of your network. This baseline is used as a starting
point for any comparison statistics. For more information, see Calculating a
Baseline on page1.
Allow Secure Data on Web (advanced)
In the interest of security, sensitive information about your network is not
viewable in the Orion Web Console. However, if your network is properly
secured, you may check this option to allow the viewing of community
strings and other potentially sensitive information within the web console.
Note: This setting does not affect the display of custom reports that you
export to the web.
Node Warning Level
Devices that do not respond to polling within this designated period of time
display as Down in the web console. By default, this value is 120 seconds.
Counter Rollover
This option sets the type of counter NPM is to use. For more information,
see Handling Counter Rollovers on page1.
Default Assigned IP Address
243

In the event that DNS resolution fails for a monitored node, the IP address
provided in this setting will be recorded as the node IP address. If blank, no
IP address will be stored.
Disable HTML Encoding for Polled Data
HTML encoding provides added security for polled data in the web
console.
Calculating Node Availability

The Availability Calculation setting on the Orion Polling Settings view provides a
choice between the following two methods for determining device availability.
Node Status:
The default method is based upon the historical up or down status of the selected
node. The selected node is polled for status on the Default Node Poll Interval
defined on the Orion Polling Settings view. For more information, see Orion
Polling Settings on page1.
If the selected node responds to a ping within the default interval, the node is
considered up, and a value of 100 is recorded in the Response Time table of the
Orion database. If the node does not respond to a ping within the default interval,
the node is considered down and a value of 0 is recorded in the Response Time
table of the Orion database. To calculate node availability over a selected time
period, the sum of all Response Time table records for the selected node over the
selected time period is divided by the selected time period, providing an average
availability over the selected time period.
Percent Packet Loss:
The second method is a more complicated calculation that effectively bases the
availability of a selected node on its packet loss percentage. As in the Node
Status method, the selected node is polled for status. If it responds within the
Default Node Poll Interval defined on the Orion Polling Settings view, a value of
100 is averaged with the previous 10 availability records. For more information,
see Orion Polling Settings on page1.
The result of the Percent Packet Loss calculation is a sliding-window average. To
calculate node availability over a selected time period, the sum of all results in the
Response Time table for the selected node over the selected time period is
divided by the selected time period, providing an average availability over time.
Note: The Percent Packet Loss method introduces a historical dependency into
244
each availability node record. In general, it is best to leave calculations based on
Node Status unless you specifically need node availability based on packet loss.
Much of the raw data that NPM polls from monitored network objects is provided
initially as coutner values. For example, one of the values that Orion NPM polls
from interfaces is ifInOctets, which returns the number of bytes the polled interface
has received since the device last booted. While this value can be useful
information in itself, generally, from a network performance monitoring standpoint,
it is more useful to know the rate of bytes received by the interface.
In order to determine a rate, two values are required. On a new install or after a
shutdown, when the SolarWinds Network Performance Monitor service starts,
there is no current network data in your Orion database. In this situation, by
default, Orion calculates a baseline for the transmission rates of the various
elements of your network. To calculate this baseline, all network resources are
polled immediately upon startup, and then, as soon as the initial poll is complete,
the network is polled again. The resulting two sets of data are used to calculate a
nearly instant baseline view of your network performance.
If you do not need statistics immediately, or if you do not want NPM to calculate a
baseline at startup, disable baseline calculation at startup by setting the Baseline
Calculation option on the Orion Polling Settings view to False. For more
information, see Configuring Polling Engine Settings on page1.
Note: Baseline calculation requires significant data gathering and processing.
Until baseline calculation is completed, both NPM server performance and the
CPU performance of some of network routers may be adversely affected.
Setting the Node Warning Level

A device may drop packets or fail to respond to a poll for many reasons. Should
the device fail to respond, the device status is changed from Up to Warning. On
the Orion Polling Settings view, you can specify the Node Warning Level, which
is the length of time a device is allowed to remain in the Warning status before it
is marked as Down. During the interval specified, the service performs "fast
polling" (ICMP) to continually check the node status.
Note: You may see events or receive alerts for down nodes that are not actually
down. This can be caused by intermittent packet loss on the network. Set the
Node Warning Interval to a higher value to avoid these false notifications. For
245

more information about packet loss reporting, see Managing Packet Loss
Reporting on page1.
To set the Node Warning Level:
1. Log in to the Orion Web Console using an account with administrative
rights.
2. Click Settings in the upper right of the web console, and then click Polling
Settings in the Settings group of the Orion Website Administration view.
3. In the Calculations and Thresholds group, set the Node Warning Level to
an appropriate interval, in seconds.
Note: The default Node Warning Level interval is 120 seconds.
4. Click Submit.

To manage the amount of network-wide packet loss reported by Orion, configure
the Response Time Retry Count for your polling engine. This setting designates
the number of times Orion retries ICMP pings on a monitored device before
packet loss is reported.
Note: This configuration change requires an insertion into your Orion database. If
possible in your environment, SolarWinds recommends installing and using the
SQL Server Management Studio to perform this insertion.
To configure the Response Time Retry Count for your polling engine:
1. Create a full backup of your Orion database. For more information, see the
SolarWinds Technical Reference, Moving Your Orion NPM Database.
2. On your Orion server, click Start> All Programs> SolarWinds Orion>
Advanced Features> Orion Service Manager.
3. Click Shutdown Everything.
4. On your Orion database server, click Start> All Programs> Microsoft
SQL Server> SQL Server Management Studio.
5. Select your Orion database Server name.
6. Select an appropiate Authentication type, provide any required credentials, and then click Connect.
7. Expand Databases> OrionDatabaseName> Tables, and then click New
Query.
8. Type the following query into the empty SQL query field:
Note: Specify your own custom values for Maximum, CurrentValue, and
DefaultValue.
INSERT INTO [OrionDatabaseName].[dbo].[Settings] (SettingID, Name, Description, Units,
Minimum, Maximum, CurrentValue, DefaultValue) VALUES (SWNetPerfMon-Settings-
246

Response Time Retry Count, Response Time Retry Count, Number of times Orion retries
ICMP pings on a monitored device before reporting packet loss, , 1,
Maximum,
CurrentValue, DefaultValue)
9. Click Execute, and then close SQL Server Management Studio.
10. On your Orion server, click Start > Run, type regedit, and then click OK.
11. Expand HKEY_LOCAL_MACHINE > SOFTWARE> SolarWinds.Net>
SWNetPerfMon.
12. Right-click Settings, and then click New> String Value.
13. Enter Response Time Retry Count as the New Value.
14. Right-click Response Time Retry Count, and then click Modify.
15. In the Value data field, enter the CurrentValue provided in the query
above, and then click OK.
16. Close the Registry Editor.
17. Click Start> All Programs> SolarWinds Orion> Advanced Features>
Orion Service Manager.
18. Click Start Everything.
247
Chapter 17: Monitoring Network

EventsCore
NPM automatically logs all events that occur to any monitored devices on your
network. These events are then displayed in the Orion Web Console, so you can
view and acknowledge them as your network management policies require.
Viewing Event Details in the Web Console

Orion logs network events and lists them in the readily customizable Events view
of the Web Console. Events are shown in order of occurrence, and they may be
viewed by device, date and time, and event or device type.
Note: The Network Event Log is maintained as part of the Nightly Database
Maintenance plan defined within the Database Settings area of the Orion Polling
Setting page in the Orion Web Console. Records are kept for the number of days
specified Events Retention field (the default is 30 days). For more information,
see Orion Polling Settings on page1.
To view event details in the Web Console:
2. Log in to the Orion Web Console, and then click Events in the Views toolbar.
3. If you want to filter your events view by object, select the Network
Object or Type of Device to which you want to limit your view in the Filter
Devices area.
4. If you want to limit your events view to show only events of a specific
type, select the appropriate Event Type in the Filter Events area.
5. If you only want to see events from a specific period of time, complete
either of the following options:
l Select a predefined period from the Time Period menu.
l Select Custom from the Time Period menu, and then click the appropriate
fields to provide Begin and End dates and times.
6. In the Show X Events field, provide the maximum number of events you
want to view.
248
Chapter 17: Monitoring Network EventsCore

7. If you want to show all events, including events that have already
been cleared, check Show Cleared Events.
8. Click Refresh to complete your events view configuration.
Acknowledging Events in the Web Console

Acknowledging network events is straightforward in the Web Console, as shown
in the following procedure.
To acknowledge events in the Web Console:
2. Log in to the Orion Web Console, and then click Events in the Views toolbar.
3. Provide appropriate filter criteria for the displayed events. For more information, see Viewing Event Details in the Web Console on page1.
4. Click Refresh to ensure that all selected view criteria take effect.
5. Check individual events to acknowledge or click Select All.
6. Click Clear Selected Events.
249
Chapter 18: Using Orion Advanced

AlertsCore
Alerts are generated for network events, and they may be triggered by the simple
occurrence of an event or by the crossing of a threshold value for a monitored
Interface, Volume, or Node. Alerts can be set to notify different people on different
days, different times of the day, different people for different events, or any
combination of times, events, and people. Alerts may be configured to notify the
people who need to know about the emergent event by several mediums,
including:
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Sending an e-mail or page

Playing a sound on the Orion Network Performance Monitor server
Logging the alert details to a file
Logging the alert details to the Windows Event Log
Logging the alert details to the NetPerfMon Event Log
Sending a Syslog message
Executing an external program
Executing a Visual Basic script
E-mailing a web page
Playing text-to-speech output
Dialing a paging or SMS service
Sending an SNMP trap
GETting or POSTing a URL to a web server
Creating and Configuring Advanced Alerts

NPM allows you to configure advanced alerts with the following features:
l
l
l
l
Sustained state trigger and reset conditions

Multiple condition matching
Automatic alert escalation
Separate actions for triggers and resets
Advanced alerts are created in the Advanced Alert Manager and configured in the
Orion Web Console, as shown in the following sections.
Note: If you want to configure advanced alert features, such as timed alert
250

checking, delayed alert triggering, timed alert resets, or alert suppression, check
Show Advanced Features at the lower left of any Advanced Alert windows. For
the purposes of this document, Show Advanced Features is always enabled.
Creating a New Advanced Alert

The following procedure creates a new advanced alert.
To create a new advanced alert:
1. Click Start> SolarWinds Orion> Alerting, Reporting, and Mapping>
Advanced Alert Manager.
2. Click View> Configure Alerts.
3. Click New.
The Edit Alert window displays, providing an array of configurable alerting

options, including trigger and reset conditions, suppressions, and date and time
limitations. The following sections provide more information about configuring
alert options.
251

Use the following steps, after clicking New, Copy, or Edit from the Manage Alerts
Window, to name and describe an advanced alert.
To name and describe an advanced alert:
3. If you want to create a new alert, click New.
4. If you want to copy or edit an existing alert, select an alert from the list,
and then click Copy or Edit, as appropriate.
5. Click General, type the name of your alert in the Name of Alert field, and
then type a description of your alert in the description field.
252
7. Type the Alert Evaluation Frequency and select Seconds, Minutes, or

Hours from the list to set the checking interval for your alert.
8. Click Trigger Condition to set the trigger condition for your alert. For more
information, see Setting a Trigger Condition for an Advanced Alert on
page1.

1. You can set the specific conditions for triggering an advanced alert with the
Note: Properly defining alert trigger conditions to address specific network
conditions on selected network objects can eliminate the need for alert
253

suppression conditions. SolarWinds recommends the use of appropriately
specific trigger conditions to define alerts instead of suppression conditions, if possible. For more information about defining conditions, see
Click Start> SolarWinds Orion> Alerting, Reporting, and Mapping>
a.
b.
8.
on page1.
To set the trigger conditions for an advanced alert:
3. If you want to create a new alert, click New.
4. If you want to copy or edit an existing alert, select an alert from the list,
and then click Copy or Edit, as appropriate.
5. Click Trigger Condition.
9.Select the Type of Property to Monitor from the list.
Note: The following image is a screen capture from an Orion Network
Performance Monitor installation. Other modules will look similar, but different
objects may be present.
6. If you select Custom SQL Alert, complete the following steps:

a. Select the object on which you want to alert in the Set up your Trigger
Query field.
b. Provide your custom SQL in the field below the object selection query.
c. If you want to delay the trigger of this alert, provide the value and
unit of your desired alert trigger delay.
d. If you want to confirm your provided SQL, click Validate SQL.
7. If you select a type of monitored object, complete the following steps:
a. Generate trigger conditions in the text field by selecting appropriate
descriptors from the linked context menus and by clicking Browse ()
254

on the left of the text field.
b. Click the linked text to select the number of conditions that you want to
apply (all, any, none, not all). For more information about linked text
conditions, see Click Start> SolarWinds Orion> Alerting, Reporting,
and Mapping> Advanced Alert Manager. on page1.
c. Click Browse () to view the following condition options:

Note: The has changed condition is only valid for the Last Boot, IOS
Version, and IOS Image Family device characteristics.
l
l
l
To generate a condition based on a comparison of device states, click Add

a Simple Condition.
To generate a condition based on a comparison of device fields and values, click Add a Complex Condition.
To define more conditions, click Add a Condition Group.
To remove a selected condition, click Delete Current Condition.
To change the order of your conditions, click Move Down or Move Up, as
appropriate.
d. If you need an additional condition, click Browse (), and then click
Add ConditionType, as appropriate for the condition you want to add.
e. If you need to delete a condition, click Browse (), next to the condition you want to delete, and then click Delete Current Condition.
255

Notes:
l
Conditions may be exported for use with other alerts by clicking Export
Conditions and saving as appropriate.
Click Import Conditions to import existing conditions from other alerts.
Imported trigger conditions automatically overwrite any existing trigger conditions.
f. If you want to specify a time duration for the condition to be valid,
type the interval and select Seconds, Minutes, or Hours from the list.
Note: You may need to delay alert trigger actions until a condition has
been sustained for a certain amount of time. For example, an alert
based on CPU load would not trigger unless the CPU Load of a node
has been over 80% for more than 10 minutes. To set up a sustainedstate trigger condition, at the bottom of the Trigger Condition tab,
provide an appropriate amount of time the alert engine should wait
before any actions are performed. By default, the alert triggers immediately, if the trigger condition exists. The maximum alert action delay is
eight hours after the trigger condition is met.
g. If you are finished configuring your advanced alert, click OK.

Set specific conditions for resetting an advanced alert using the following steps.
To set the conditions for resetting an advanced alert:
2. Click View> Configure Alerts, and then click New or select an alert from
the list and click Copy or Edit.
3. Click Reset Condition.
4. If you want a simple alert reset when trigger conditions no longer
exist, select Reset when trigger conditions are no longer true.
5. If you want a conditional alert reset, select Reset this alert when the following conditions are met.
Note: Generate reset conditions in the text field by selecting appropriate
descriptors from the linked context menus and by clicking Browse ().
6. If you want to copy the condition used on the Trigger Condition tab,
click Copy From Trigger.
7. Click the linked text to select the number of conditions to apply. For more
information, see Click Start> SolarWinds Orion> Alerting, Reporting, and
256

Mapping> Advanced Alert Manager. on page1.
8. Click Browse () to view the following condition options:
l To generate a condition based on a comparison of device states, click Add
a Simple Condition.
l To generate a condition based on a comparison of device fields and values, click Add a Complex Condition.
l To further define condition application, click Add a Condition Group.
l To remove a selected condition, click Delete Current Condition.
l To change the order of your conditions, click Move Down or Move Up.
9. If you need an additional condition, click Add, and then select the type
of condition you want to add.
10. If you need to delete a condition, select the condition from the condition
list, and then click Delete.
Notes:
Conditions may be exported for use with other alerts by clicking Export
Conditions and saving as appropriate.
l Conditions from other alerts may be imported to the current alert by clicking
Import Conditions.
Warning: Imported trigger conditions automatically overwrite any existing
trigger conditions.
l Because there are many situations where the reset conditions are the
opposite of, or are very similar to, the trigger conditions, SolarWinds has
provided a function that copies the trigger conditions to the reset conditions. Click Copy From Trigger to add the trigger condition.
11. If you want to specify a time duration for the condition to be valid, type
the time interval and select Seconds, Minutes, or Hours from the list.
Note: It is often appropriate to delay alert reset actions until a condition has
been sustained for a certain amount of time. For example, an alert based
on node status would not reset until the node has been up for more than
five minutes. To establish a sustained-state reset condition, provide an
appropriate interval at the bottom of the Reset Condition tab for the amount
of time that the alert engine should wait before any actions are performed.
The default setting is to reset the alert immediately, once the reset condition exists. The maximum delay is eight hours.
12. If you are finished configuring your advanced alert, click OK.
l

You can set the specific conditions for suppressing an advanced alert using the
257

Notes:
Alert Suppression is only available if you have checked Show Advanced
Features in the lower left of the Edit Advanced Alert window.
9. In many cases, because suppression conditions are checked against all
monitored objects on your network, properly defining alert trigger conditions may eliminate the need for alert suppression. For more information
about defining alert trigger conditions, see Setting a Trigger Condition for
an Advanced Alert on page1 and Click Start> SolarWinds Orion> Alerting, Reporting, and Mapping> Advanced Alert Manager.
f.
g.
16.
l on page1.
l
To set conditions for advanced alert suppression:

1. Click Start> All Programs> SolarWinds Orion> Alerting, Reporting, and
Mapping> Advanced Alert Manager.
3. Click New or select an alert from the list, and then click Copy or Edit, as appropriate.
4. Click Alert Suppression.
Note: Generate suppression conditions in the text field by selecting appropriate descriptors from the linked context menus and by clicking Browse ()
on the left of the text field.
5. If you want to copy the condition used on the Trigger Condition tab, click
Copy From Trigger.
6. Click the linked text to select the number of conditions that you want to apply
(all, any, none, not all). For more information about linked text conditions, see
Advanced Alert Manager. on page1.
7. Click Browse () to view the following condition options:
l To generate a condition based on a comparison of device states, click Add
a Simple Condition.
l To generate a condition based on a comparison of device fields and values, click Add a Complex Condition.
l To further define the application of your conditions, click Add a Condition
Group.
l To remove a selected condition, click Delete Current Condition.
l To change the order of your conditions, click Move Down or Move Up.
258

8. If you need an additional condition, click Add and then select the type of
condition you want to add.
9. If you need to delete a condition, select the condition from the condition list,
and then click Delete.
Warning: Imported conditions automatically overwrite existing conditions.
Note: Conditions may be exported for use with other alerts by clicking Export
Conditions and saving as appropriate. Conditions from other alerts may be
imported to the current alert by clicking Import Conditions.
Setting the Monitoring Period for an Advanced Alert

You can select the specific time periods and days that your advanced alert will
monitor your network objects with the following procedure.
To set the monitoring time period and days for an advanced alert:
Mapping> Advanced Alert Manager.
3. Click New or select an alert from the list.
4. Click Copy or Edit.
5. Click Time of Day.
6. Enter the time period over which you want to monitor your network.
Note: Alerts only trigger if the trigger condition is met within this time
period.
7. Select the days on which you want to monitor your network.
Note: Alerts will only trigger if your trigger condition is met on the days
selected.
Setting a Trigger Action for an Advanced Alert

Select actions that will occur when your advanced alert is triggered as follows.
To set a trigger action for an advanced alert:
3. Click New or select an alert from the list, and then click Copy or Edit, as
appropriate.
4. Click Trigger Actions.
259

5. If you are adding a new advanced alert action, click Add New Action,
and then select the actions you want to occur when the alert triggers.
6. If you are editing an existing advanced alert action, select the existing
alert action, and then click Edit Selected Action.
7. Follow the instructions to configure each action.
Note: Depending on the type of action selected, different options will be
displayed to configure the alert action. For more information about individual alert actions, see Available Basic Alert Actions on page1.
8. If you need to delete an action, select the action and then click Delete
Selected Action.

Select actions that will occur when your advanced alert is reset with the following
procedure.
To set a reset action for an advanced alert:
3. Click New Alert, Copy Alert, or Edit Alert, as appropriate.
4. Click Reset Actions.
5. If you are adding a new advanced alert action, click Add New Action,
and then select the actions you want to occur when the alert triggers.
6. If you are editing an existing advanced alert action, select the existing
alert action, and then click Edit Selected Action.
7. Follow the instructions to configure each action.
Note: Depending on the type of action selected, different options display
configuring the alert action. For more information about individual alert
actions, see Available Basic Alert Actions on page1.
8. If you need to delete a selected action, click Delete Selected Action.
Alert Escalation
When editing any trigger or reset action, use the Alert Escalation tab, if it is
available, to define additional alert action options. Depending on the alert action
being configured, any or all fo the following options may be available on the Alert
Escalation tab:
260
To disable the action when the alert has been acknowledged, check Do
not execute this Action if the Alert has been Acknowledged.
To execute the action repeatedly as long as the trigger condition exists,
check Execute this Action repeatedly while the Alert is Triggered and
then provide an appropriate action execution interval.
To delay the execution of the alert action, check Delay the execution of
this Action and then provide an appropriate interval that the alert engine
should wait after the alert condition is met before the alert action is
executed.
For more information, see Escalated Advanced Alerts on page1.
Sharing Advanced Alerts with Other SolarWinds Products

Advanced alerts that you have created using Advanced Alert Manager may be
shared with selected other SolarWinds products.
To share advanced alerts with other SolarWinds products:
19. Click New Alert, Copy Alert, or Edit Alert, as appropriate.
20. Click Alert Sharing.
21. Check Automatically share alert data...
22. Provide an appropriate Alert Subject and select the alert
Severity.Note: This information may be used to determine how a
shared alert is handled by the product to which you are sharing the
alert.
23. If there are any additional alert properties you want to include with the
shared alert, complete the following procedure:
k. Click Insert Variable.
l. Select a Variable Category, and then select the variable to add.
m. If you want to change the parser, check Change Parser, and then
select the parser you want to use.
n. If you want to define the SQL variable to copy to the clipboard,
check Define SQL Variable, and then click Insert Variable From
Above List.
o. Click Build Selected Variable.
Note: For more information on the use of variables, see NPM Variables and Examples on page1. For more information about messages
that use variables, see Example Messages Using Variables on
page1.
261

24. Click OK.

A condition group is a set of user-defined rules governing alert triggers and
resets. By default, the condition group Trigger Alert when all of the following apply is
added when new alert triggers or reset conditions are created. Four different
logical descriptors are used to create conditions: all, any, none, and not all, and
clicking the word all and enables you to select different values. The following
sections describe these logical descriptors.
All Condition Group
Trigger Alert when all of the following apply means
that every condition in the group
must be true before the alert is triggered.

In the following example, there are three conditions within the condition group:
l
l
l
Node Status is equal to Up

Percent Loss is greater than or equal to 75
CPU Load is greater than or equal to 85
This alert will not trigger unless the Node is Up, packet loss is greater than or
equal to 75%, and CPU load is greater than or equal to 85%.
When setting the condition group to all, picture every condition as being
separated by an and statement. So, in this example, the alert trigger would read:
Alert when: (Node Status=Up) and (Percent Loss>=75) and (CPU Load>=85)
Any Condition Group

Changing the condition group to Trigger Alert when any of the following apply
changes the logic to or statements. In this example, changing the condition group
to any would change the alert trigger to:
Alert when: (Node Status=Up) or (Percent Loss>=75) or (CPU Load>=85)
In this situation, if any of the three conditions become true, the alert will trigger.
None Condition Group
Changing the condition group to Trigger Alert when none of the following apply
means that all conditions in the group must be false before the alert is triggered.
In this example the alert trigger would read:
Alert when: (Node Status=Down) and (Percent Loss<=75) and (CPULoad<=85)
262

Each condition is separated by an and statement just like the all condition group;
however, the conditions have been inverted (Node Status = Down instead of Node
Status = Up).
Not All Condition Group
Changing the condition group to Trigger Alert when not all of the following apply
means that any condition in the group must be false before the alert is triggered.
So, in this example the alert trigger would read:
Alert when: (Node Status=Down) or (Percent Loss<=75) or (CPU Load<=85)
Each condition is separated by an or statement just like the any condition group;
however, the conditions have been inverted (Node Status=Down instead of Node
Status=Up).
Using the Advanced Alert Manager

The Advanced Alert Manager is an interface used to view network events and
alerts. You can also use Advanced Alert Manager to create and manage
advanced alerts. The following procedures introduce the main features of the
Advanced Alert Manager showing how to configure and view advanced alerts.
Current Events Window
The Current Events window of the Advanced Alert Manager shows the most
recent network events with their descriptions and other information from the
events log.
To use the Current Events window to view network events:
and Mapping> Advanced Alert Manager.
2. Click View> Current Events.
3. Select an appropriate Group By: criterion for grouping events.
4. If you want to change the viewable category columns in the Current
Events window, click Include, and then complete the following procedure:
a. Click the Event View Columns tab, and then select column IDs from the
All Columns field.
b. Click the right arrow to move your column IDs into the Selected
Columns field.
c. If there are any column IDs in the Selected Columns field that you
do not want to view, select them, and then click the left arrow to move
your selected column IDs to the All Columns field.
263

d. Click the up or down arrows to change the order of your selected
columns accordingly.
e. Position the slider to set the Event View refresh rate.
f. Type the number of events that you want to be able to review in the Display a maximum of XXXX events in the Event View field.
g. If you are finished configuring your Current Events View, click OK.
5. Click Refresh to update the Current Events window with the latest events
and column IDs.
6. If you want to acknowledge a network event, click X next to the event.
The Active Alerts window of the Advanced Alert Manager shows network alerts
with their descriptions and other information from the alerts log.
To use the Active Alerts window to view active network alerts:
2. Click View> Active Alerts.
3. Select an appropriate Group By criterion for grouping alerts.
4. Click Include, and then check the types of alerts that you want to view:
Acknowledged, Trigger Pending, Triggered, or Reset Pending.
5. If you want to change the viewable category columns in the Current
Events window, click Include> Select Alert Columns, and then complete the following procedure:
a. Select column IDs from the All Columns field.
b. Click the right arrow to move your column IDs into the Selected
Columns field.
c. If there are any column IDs in the Selected Columns field that you
do not want to view, select them, and then click the left arrow to move
your selected column IDs to the All Columns field.
d. Click the up or down arrows to change the order of your selected
columns accordingly.
e. Position the slider to set the Alert View refresh rate.
f. If you are finished configuring your Active Alerts View, click OK.
6. Click Refresh to update the Active Alerts window with the latest alerts and
column IDs.
7. Click Configure Alerts to change the settings for individual alerts. For
more information, see Monitoring Network EventsCore on page1.
8. If you want to acknowledge an active alert, check the alert in the
Acknowledged column.
264

Note: As soon as the alert is acknowledged, the user information and date/time is recorded in the database.
Alert Viewer Settings
Alert views in the Orion Advanced Alert Manager are configured in the Alert
Viewer Settings window, as presented in the following procedure.
To configure alert views in the Advanced Alert Manager:
2. Click File> Settings.
Note: The Configure Alerts tab of the Alert Viewer Settings window displays all available network alerts, and from this window you can create,
copy, edit, and delete alerts. For more information, see Creating and Configuring Advanced Alerts on page1.
3. Click Alert View Columns.
4. Select the information titles that you want to see about your alerts from the
All Columns list.
5. Click the right arrow to transfer them to the Selected Columns list.
Note: The Selected Columns list provides a list of all the information that
the Alert Viewer will show for each active alert.
6. If you want to remove titles from the Selected Columns list, select titles
that you want to remove from the active view in the Selected Columns list,
and then click the left arrow.
7. If you want to rearrange the order in which the different pieces of alert
information are presented in the Alert Viewer, select titles from the
Selected Columns list and use the up and down arrows to arrange the
titles accordingly.
8. Position the slider at the bottom of the tab to set the Alert View refresh rate.
9. Click Event View Columns, and then select the information titles that you
want to see about events from the All Columns list.
10. Click the right arrow to transfer them to the Selected Columns list.
Note: The Selected Columns list provides a list of all the information that
the Alert Viewer will show for each recorded event.
11. If you want to remove titles from the Selected Columns list, select titles
that you want to remove from the active view in the Selected Columns list,
and then click the left arrow.
12. If you want to rearrange the order in which the different pieces of
event information are presented in the Alert Viewer, select titles from
265

the Selected Columns list and use the up and down arrows to arrange the
titles accordingly.
13. Position the slider at the bottom of the tab to set the Event View refresh
rate.
14. Enter the number of events that you want to see in the Event View.

Orion Network Performance Monitor provides a variety of actions to signal an alert
condition on your network. These alert actions are available for advanced alerts,
and the following procedure assigns actions to the alert conditions that you have
defined for your network.
To add an advanced alert action:
3. Check the alert to trigger the action, and then click Edit Alert.
4. Click Actions, and then select the action you want to edit.
5. Click Add Alert Action, and then click the action to add to your chosen
alert.
For more information about individual alert actions, see Available Advanced
Alert Actions on page1.
Available Advanced Alert Actions

The following sections detail the configuration of available alert actions:
l
l
l
l
l
l
l
l
l
l
l
l
l

Playing a Sound
Emailing a Web Page
266
Sending an E-mail / Page

The following procedure configures an e-mail/page action for an advanced alert.
Notes:
l
Confirm that the polling engine you have configured to trigger your alert
has access to your SMTP server.
Emails and pages are sent in plain text.
To configure an email/page action for an advanced alert:

1. Click E-mail/Pager Addresses, and then complete the To, CC, BCC,
Name, and Reply Address fields.
Note: You must provide at least one email address in the To field, and multiple addresses must be separated with commas. Some pager systems
require a valid reply address to complete the page.
2. Click Message, and then select your email format (Plain text or HTML).
3. Type the Subject and Message of your alert trigger email/page.
Note: Messaging is disabled if both Subject and Message fields are
empty.
4. If you want to insert a variable into the Subject or Message field, click
the location of the new variable, and then complete the following procedure:
a. Click Insert Variable.
b. Select a Variable Category, and then select the variable to add.
c. If you want to change the parser, check Change Parser, and then
d. If you want to define the SQL variable to copy to the clipboard,
Above List.
e. Click Build Selected Variable.
page1.
5. Click SMTP Server.
6. Type the Hostname or IP Address of your SMTP Server and the designated SMTP Port Number.
267
Playing a Sound
7. If you want to use SSL/TLS encryption for your alert email, check
Enable SSL.
10. Enter the time period over which you want to activate your alert action, and
then select the days on which you want to activate your alert action.
11. If you want to enable alert escalation, click the Alert Escalation tab, and
then check any of the following options, as appropriate for your alert:
l To disable the action when the alert has been acknowledged, check Do
l To execute the action repeatedly as long as the trigger condition exists,
l To delay alert action execution, check Delay the execution of this
Action, and then provide an appropriate interval the alert engine should
wait after the alert condition is met before the alert action is executed.
10.If you are finished configuring your email/page alert action, click OK.
Playing a Sound
Orion can be configured to play a sound upon alert trigger or reset. The following
procedure configures a sound to play for an advanced alert.
Note: Due to restrictions on Windows service applications, this action is not
available to Orion installations on either Windows 7 or Windows Server 2008 and
higher. For more information, see the SolarWinds Knowledge base article,
"Enabling audible alerts (Play a Sound action) on Windows Server 2008".
To configure a play sound action for an advanced alert:
1. Click Play Sound.
2. Specify a sound file for the alert trigger by doing either of the following in
the Sound file to play field:
l Type the complete directory path and file name.
l Click Browse () to navigate your file system and select the target file.
3. Click the musical note button to the right of either text field to test the sound
file you have specified.
5. Enter the time period over which you want to activate your alert action, and
then select the days on which you want to activate your alert action.
268

6. If you want to enable alert escalation, click Alert Escalation, and then
check any of the following options, as appropriate for your alert:
7. If you are finished configuring your play a sound alert action, click OK.
Logging an Advanced Alert to a File

Orion can be configured to log alerts to a designated file. The following procedure
logs an advanced alert to a designated file
To configure an alert log file for an advanced alert:
1. Click Event Log, and then specify an alert log file by doing either of the following in the Alert Log Filename field:
Note: If the file specified does not exist, it will be created with the first alert
occurrence.
l Type the complete path and name of the target file.
Click Browse () to navigate your file system and select the target file.
2. Type the message you want to log to your alert log file in the Message
field.
3. If you want to insert a variable into the Message field, complete the following procedure:
a. Click Insert Variable, and then select a Variable Category.
b. Select the variable you want to add.
c. If you want to change the parser, check Change Parser, and then
d. If you want to define the SQL variable to copy to the clipboard,
Above List.
e. Click Build Selected Variable.
Note: For more information on the use of variables, see NPM Variables and Examples on page1.
5. Enter the time period over which you want to activate your alert action.
269

6. Select the days on which you want to activate your alert action.
7. If you want to enable alert escalation, click the Alert Escalation tab, and
To delay alert action execution, check Delay the execution of this Action, and
then provide an appropriate interval the alert engine should wait after the alert
condition is met before the alert action is executed.

You may specify that an alert be logged to the Windows Event Log either on the
Orion server or on a remote server using the following procedure.
To configure advanced alert logging to the Windows Event Log:
1. Click Windows Event Log.
2. If you want your alert to write to the Windows Event Log on your
Orion server, select Use Event Log Message on Network Performance
Monitor Server.
3. If you want your alert to write to the Windows Event Log on a remote
server, select Use Event Log Message on a Remote Server, and then
provide the Remote Server Name or IP Address.
4. Type the message you want to log to the Windows Event Log in the Message to send to Windows Event Log field.
a. Click Insert Variable, select a Variable Category, and then select the
variable you want to add.
b. If you want to change the parser, check Change Parser, and then
c. If you want to define the SQL variable to copy to the clipboard,
Above List.
d. Click Build Selected Variable.
270

7. Enter the time period and select the days over which you want to activate
your alert action.

You may specify that an alert be logged to the NetPerfMon Event Log either on
the Orion server or on a remote server. The following procedure logs an
advanced alert to the NetPerfMon Event Log on a designated server.
To configure advanced alert logging to the NetPerfMon Event Log:
1. Click NPM Event Log.
2. Type the message you want to log to the NetPerfMon Event Log in the Message to send to Network Performance Monitor Event Log field.
b. Select a Variable Category.
c. Select the variable you want to add.
d. If you want to change the parser, check Change Parser, and then
e. If you want to define the SQL variable to copy to the clipboard,
Above List.
f. Click Build Selected Variable.
5. Enter the time period and select the days over which you want to activate
your alert action.
271


Orion can log received alerts to the Syslog of a designated machine. The
following procedure configures an advanced alert to send a message to a
designated Syslog server.
To configure an advanced alert to send a Syslog message:
1. Click Syslog Message.
2. Type the Hostname or IP Address of the Syslog Server to which you
want to send Syslog messages.
3. Select the Severity of your alert Syslog message.
Note: For more information, see Syslog Severities on page1.
4. Select Facility of your alert Syslog message.
Note: For more information, see Syslog Facilities on page1.
5. Type the Syslog Message you want to send.
b. Select a Variable Category.
c. Select the variable you want to add.
d. If you want to change the parser, check Change Parser, and then
e. If you want to define the SQL variable to copy to the clipboard,
Above List.
f. Click Build Selected Variable.
272

7.
8.
9.
10.
Click Time of Day.

Enter the time period over which you want to activate your alert action.
Select the days on which you want to activate your alert action.
If you want to enable alert escalation, click Alert Escalation, and then
11. If you are finished with the configuration of your send Syslog message action, click OK.

There are several circumstances where you may want to execute a program
when a specific network event occurs. Use the Edit Execute Program Action
window to specify the executable that should be started when the specified alert
is triggered or reset, as shown in the following procedure.
Note: External programs selected for this action must be executable using a
batch file called from the command line.
To configure an advanced alert to execute an external program:
1. Click Execute Program.
2. Specify the batch file to execute, either by typing the complete path and
name of the target file into the Program to execute field or by clicking
Browse (), to browse your folder structure and select the target executable.
3. Click Time of Day, and then enter the time period when you want to
execute the external program.
4. Select the days on which you want to execute the external program.
5. Click Alert Escalation, and then check any of the following options, as
appropriate for your alert:
l To execute the action repeatedly, while the trigger condition exists, check
Execute this Action repeatedly while the Alert is Triggered, and then
provide an action execution interval.
273

To delay alert action execution, check Delay the execution of this
Action, and then provide the interval the alert engine should wait.
6. If you are finished configuring your external program execution
action, click OK.
l

In some situations you may want to execute a Visual Basic (VB) script when a
network event occurs. The Edit Execute VB Script Action window is used to
specify the name and complete path of the file that shall be executed when the
specified alert is triggered or reset.
To configure alerts to execute a Visual Basic (VB) script:
1. Click VB Script, and then select an available VB Script Interpreter.
2. Specify a VB script to execute either by typing the complete path and name
of the VB script into the VB Script to execute field or by clicking Browse
() to browse your folder structure and select the script.
3. Click Time of Day, and then enter the time period and select the days on
which you want to execute the selected VB script.
4. Click Alert Escalation, and then check any of the following options, as
appropriate for your alert:
l To disable the script when the alert has been acknowledged, check Do
l To execute the script repeatedly as long as the trigger condition exists,
l To delay script execution, check Delay the execution of this Action, and
then provide an appropriate interval the alert engine should wait after the
alert condition is met before the script executes.
5. If you are finished configuring your VB script execution action, click
OK.
Emailing a Web Page

The Edit E-mail Web Page Action window includes several tabs for configuration.
The following procedure configures an e-mail URL action for an advanced alert.
Note: Emails are sent in plain text.
To configure an email web page action for an advanced alert:
1. Click E-mail a Web Page, and then then click OK.
2. Complete the To, CC, BCC, Name, and Reply Address fields.
Note: You must provide at least one address in the To field. When
274
3.
4.
5.
6.
7.
8.
9.
10.
l
entering multiple addresses, you may only separate addresses with a

comma. Some pager systems require a valid reply address to complete the
page.
Click SMTP Server.
Type the Hostname or IP Address of your SMTP Server and the designated SMTP Port Number.
Note: The SMTP server hostname or IP address field is required. You cannot email a web page without identifying the SMTP server.
Click URL, and then type the Subject of your alert email.
Note: Messaging is disabled if both Subject and URL fields are empty.
If you want to insert a variable into the Subject field, click the location of
the new variable, and then complete the following procedure:
a. Click Insert Variable, select a Variable Category, and then select the
variable to add.
b. If you want to change the parser, check Change Parser, and then
c. If you want to define the SQL variable to copy to the clipboard,
Above List.
d. Click Build Selected Variable.
page1.
Provide the URL of your alert email.
Note: Messaging is disabled if both Subject and URL fields are empty.
If the web server of the URL you want to email requires user access
authentication, provide both the Web Server UserID and the Web Server
Password in the Optional Web Server Authentication area.
Click Time of Day, and then enter the time period and select the days
when you want to activate your alert action.
If you want to enable alert escalation, click Alert Escalation, and then
To disable the action when the alert has been acknowledged, check Do
To execute the action repeatedly, as long as the trigger condition exists,
275

then provide an appropriate interval for the alert engine to wait after the alert
condition is met before executing the alert action.
11. If you are finished configuring your URL email alert action, click OK.

You may specify a phrase that will be spoken upon alert trigger and a separate
phrase for the alert reset. Orion uses Microsoft Speech Synthesis Engine version
5.0, as included with Windows 2003 and XP Professional. If you have Orion
maintenance, you may also install and use other text-to-speech engines by
visiting the SolarWinds website. The following procedure configures text-tospeech output for an advanced alert trigger or reset.
Note: Due to restrictions on Windows service applications, the Text to Speech
action is not available to Orion installations on either Windows 7 or Windows
Server 2008 and higher.
To configure a text-to-speech output action for an advanced alert:
1. Click Text to Speech output, and then then click OK.
2. On the General tab, Select a Speech Engine, and then use the sliders to
set the required Speed, Pitch and Volume.
3. On the Phrase tab, type the text you want to output as speech in the
Phrase to speak field.
Note: Click Speak to hear the text, as provided, with the options configured as set on the General tab.
4. On the Time of Day tab enter the time period and select the days on which
you want to activate your alert action.
5. If you want to enable alert escalation, open the Alert Escalation tab, and
l To execute the action repeatedly, as long as the trigger condition exists,
6. If you are finished configuring your texttospeech alert action, click
OK.
276

Alerts can be configured to display a pop-up Windows Net Message either on a
specific computer or on all computers in a selected domain or workgroup. The
following steps configure Windows Net messaging for triggered or reset alerts.
Note: The only operating systems supporting Windows Net Messaging on which
SolarWinds supports Orion installations are Windows Server 2003 and Windows
XP. SolarWinds only supports evaluation installations of Orion on Windows XP.
To configure Orion to send a Windows Net message upon alert:
1. Click Send a Windows Net Message, and then then click OK.
2. On the Net Message tab, enter the Computer Name or IP Address of the
machine where you want to send a Windows Net message.
3. If you want to send the message to all computers in the domain or
workgroup of your target computer, check Send to all Computers in
the Domain or Workgroup.
4. Enter the Windows Net message to send in the Message to send field.
11.If you are finished configuring your texttospeech alert action, click OK.

The following steps configure an alert to send an SNMP trap on trigger or reset.
To configure Orion to send an SNMP trap upon alert:
1. Click Send an SNMP Trap, and then then click OK.
277

2. On the SNMP Trap tab, in the SNMP Trap Destinations field, enter the IP
addresses of the servers to which you want to send your generated traps.
Note: Use commas to separate multiple destination IP addresses.
3. Select the type of trap to send on alert trigger from the Trap Template list.
Note: Some trap templates may use an alert message. You may change
any provided text, if you want, but it is important that you understand the
use of variables beforehand. For more information about using variables,
see NPM Variables and Examples on page1.
4. Select the SNMP Version for your SNMP trap.
5. If you are sending an SNMPv1 or SNMPv2c trap, enter the SNMP Community String for your network in the designated field.
6. If you are sending an SNMPv3 trap, provide all required SNMPv3 credentials.
9. If you are finished configuring your SNMP trap alert action, click OK.

Orion can be configured to communicate alerts using HTTP GET or POST
functions. As an example, a URL may be used as an interface into a trouble ticket
system, and, by correctly formatting the GET function, new trouble tickets may be
created automatically. The following procedure configures Orion to use GET or
POST HTTP functions to communicate alert information.
To configure Orion to use GET or POST URL functions with alerts:
1. Click Get or Post a URL to a Web Server, and then then click OK.
2. Select either Use HTTP GET or Use HTTP POST to set the function that
you want to use to communicate alert information.
3. If you selected Use HTTP GET, enter the URL you want to GET.
278

4. If you selected Use HTTP POST, enter the URL you want to POST, and
then enter the Body to POST.
7. If you are finished with the configuration of Orion to use HTTP GET or
POST URL functions, click OK.

If NotePager Pro is installed Orion can be configured to communicate alerts using
paging and SMS services. For more information about installation and
configuration, see SolarWinds Orion Network Performance Monitor Integration
at www.notepage.net.
Testing Alert Actions

The Advanced Alert Manager provides an alert action test feature so you can
confirm the desired function for actions you have configured to fire when Orion
detects an alert condition on your network. Complete he following procedure to
test an alert action.
To test an alert action:
2. Click Configure Alerts, and then click the alert for which the action you
want to test is configured.
3. Click Test.
4. If the alert is configured to fire on a node condition, select Alert on Network Node, and then select the node against which you want to test the
action.
279

5. If the alert is configured to fire on an interface condition, complete the
following steps:
a. Select Alert on Network Node, and then select the parent node of the
interface against which you want to test the action.
b. Select Select Interface on ParentNode, and then select the interface
against which you want to test the action.
6. If the alert is configured to fire on a volume condition, complete the following steps:
a. Select Alert on Network Node, and then select the parent node of the
volume against which you want to test the action.
b. Select Select Volume on ParentNode, and then select the volume
against which you want to test the action.
7. If you are testing an alert trigger action, click Test Alert Trigger.
8. If you are testing an alert reset action, click Test Alert Reset.
9. When the test completes, as indicated by the test log, click Done.
Confirm that the expected action occurred as a result of the selected alert trigger
or reset.

The Triggered Alerts for All Network Devices page provides a table view of your
alerts log. You can customize the list view by using the following procedure to
select your preferred alert grouping criteria.
To view alerts in the Web Console:
2. Click Alerts in the Views toolbar.
3. If you want to filter your alerts table view by device, select the device to
which you want to limit your alerts view in the Network Object field.
4. If you want to filter your alerts table by type of device, select the device
type to which you want to limit your alerts view in the Type of Device field.
5. If you want to limit your alerts table to show a specific type of alert,
select the alert type in the Alert Name field.
6. In the Show Alerts field, provide the number of alerts you want to view.
7. If you want to show all alerts, even if they have already been cleared
or acknowledged, check Show Acknowledged Alerts.
8. Click Refresh to complete your Alerts view configuration.
280
Acknowledging Advanced Alerts in the Web Console

NPM allows you to acknowledge advanced alerts in the Orion Web Console,
allowing you to eliminate time lost either when multiple users attempt to resolve
the same issue or when a user tries to address an issue that has already been
resolved.
To acknowledge advanced alerts using the Orion Web Console:
1. Log in to the Orion Web Console using an account that has been granted
alert acknowledgement privileges.
Note: For more information about access privileges for Orion Web Console users, see User Account Access Settings on page 1.
2. Click Alerts on the Views toolbar.
3. If you want to limit the list of alerts to only those dealing with a single
device, select the specific device from the Network Object list.
Note: This option is only available if alerts fire on multiple network
devices.
4. If you want to limit the list of alerts to only those dealing with a single
type of device, select the device type from the Type of Device list.
Note: This option is only available if Orion is monitoring multiple types of
network devices.
5. If you want to limit the list of alerts to only those of a single type, select
the specific alert type from the Alert Name list.
Note: This option is only available when multiple types of NPM alerts have
been triggered.
6. Confirm the number of alerts displayed in the Show Alerts field.
7. If you want acknowledged alerts to remain in the Alerts view, even
after they have been acknowledged, check Show Acknowledged
Alerts.
8. Click Refresh to update the alerts list with your new settings.
9. Check Acknowledged next to the alerts you want to acknowledge.
10. Click Acknowledge Alerts.
Managing Advanced Alerts in the Web Console

NPM allows you to manage advanced alerts directly from the Orion Web Console,
as indicated in the following sections:
l
281

l
l


NPM allows you to configure existing advanced alerts directly from the Orion Web
Console, as indicated in the following procedure.
To edit an existing advanced alert in the web console:
1. Log on to the Orion Web Console as an administrator.
2. Click Settings in the top right corner of the web console, and then click
Manage Advanced Alerts in the Manage Alerts grouping.
3. Check the alert you want to configure, and then click Edit.
4. If you want to edit the Alert name or Alert description, edit text in the
corresponding fields accordingly.
5. Select Yes or No for the Enable alert option to either enable the alert or
disable the alert, respectively.
Note: An alert will only trigger if it is enabled. Disabled alerts will not trigger.
6. Select Yes or No for the Ignore timeout option.
Note: Configuring an alert to ignore timeout will ensure that the alert is not
disabled in the event that the timeout configured in Polling Settings has
been exceeded.
7. Set the Alert poll interval.
Note: The Alert poll interval indicates the frequency with which
SolarWinds polls for the selected alert condition.
8. Provide the Valid time of day and the Selected days during which the
selected alert may trigger.
Note: The selected alert will only trigger if the alert condition is detected
within the time window provided on the days checked.
9. If you have completed all required configuration, click OK.

NPM allows you to enable and disable existing advanced alerts directly from the
Orion Web Console, as indicated in the following procedure.
To enable or disable an existing advanced alert in the web console:
282

3. If you want to disable a currently enabled alert, check the enabled alert
that you want to disable, and then click Disable.
4. If you want to enable a currently disabled alert, check the disabled alert
that you want to enable, and then click Enable.

NPM allows you to delete existing advanced alerts directly from the Orion Web
Console, as indicated in the following procedure.
Note: If you have deleted an advanced alert and you want to recreate it, you must
use the Advanced Alert Manager. For more information, see "Creating a New
Advanced Alert" on page1.
To delete an existing advanced alert in the web console:
3. Check the alert that you want to delete, and then click Delete.
Escalated Advanced Alerts

By creating an escalated alert, NPM enables you to customize a series of alerts to
trigger successive actions as an alert condition persists. The following sections
provide both a scenario where an escalated alert may be useful and the steps
required to create one using the Orion Advanced Alert Manager.
Escalated Alert Example

WidgetCo is a business with a small IT staff, consisting of two technicians and an
IT manager. To ensure that issues are addressed appropriately, the IT manager
has created multiple escalated alerts for a range of potential network events,
including device failures and excessive disk space or bandwidth usage.
Typically, the escalated alerts configured by the WidgetCo IT manager proceed
as follows:
1. Immediately, as soon as NPM recognizes an alert condition, NPM generates both an email and a page that are sent to one of the two technicians.
An entry is also recorded in the Orion events log.
2. If the alert is not acknowledged in the Orion Web Console within 20
minutes, a second alert is fired, generating another email and another
page, both sent to both technicians. An entry is also recorded in the Orion
events log.
283

3. If the second alert is not acknowledged within 20 minutes, NPM fires a
third alert that sends both an email and a page to both technicians and to
the IT manager. An entry is also recorded in the Orion events log.
Escalated alerts ensure that everyone on the WidgetCo IT staff is notified of any
significant network alert conditions within 45 minutes without burdening the IT
manager with excessive alert notifications. The following section provides a
procedure to create a similar escalated alert scheme.

The following procedure creates a series of escalated alerts similar to the scheme
described in the preceding example.
Note: Repeat these steps to create a separate alert for each notification level.
The example provided in the previous section uses a three-level escalated alert,
The following procedure should be completed three times, once for each alert, to
replicate the escalated alert of the previous section.
To create an escalated alert:
3. Click New, and then click General.
4. Type Level X , where X is the level corresponding to the currently
configured alert, as the name of your escalated alert in the Name of Alert
field.
Note: The example provided in the previous section uses a three-level
escalated alert.
5. Type a description of your first level escalated alert in the description field,
and then check Enable this Alert.
6. Type the Alert Evaluation Frequency and select Seconds, Minutes, or
Hours from the list to set the checking interval for your alert.
7. Click Trigger Condition.Note: For more information about configuring trigger conditions, see Setting a Trigger Condition for an Advanced Alert on
page1.
8. Select Node as the Type of Property to Monitor.
9. Confirm that the linked text in the alert definition field displays all.
Note: Click the linked text to select the number of conditions that you want
to apply (all, any, none, not all). For more information about linked text
conditions, see Click Start> SolarWinds Orion> Alerting, Reporting, and
284

10. Click Browse (), and then click Add a Simple Condition.
11. Click the first asterisk (*), and then select Network Nodes > Node
Details> Node Name.
12. Confirm that is equal to is the linked condition text in the trigger definition.
Note: Click the linked text to select the condition you want to apply (equal,
greater, less, ). For more information about linked text conditions, see
Advanced Alert Manager. on page1.
13. Click the second asterisk (*), and then select your production web server
from the list of monitored nodes.
14. Click Add, and then click Simple Condition.
15. Click the first asterisk (*) in the second condition, and then select Network
Nodes > Node Status> Node Status.
16. Confirm that is equal to is the linked condition text in the second trigger
definition.
Note: Click the linked text condition to select the condition you want to
apply (equal, greater, less, ). For more information about linked text conditions, see Click Start> SolarWinds Orion> Alerting, Reporting, and
17. Click the second asterisk (*) in the second condition, and then select
Down.
18. If you want to apply any reset conditions to your escalated alert, click
Reset Condition, and then provide appropriate conditions. For more
information, see Setting a Reset Condition for an Advanced Alert on
page1.
19. If you want to apply any alert suppressions to your escalated alert,
click Alert Suppression, and then provide appropriate suppression conditions. For more information, see Setting a Suppression for an Advanced
Alert on page1.
20. If you want to restrict when your escalated alert is valid, click Time of
Day, designate the Valid Time of Day for your escalated alert, and then
select the Days of the Week on which your escalated alert is valid. For
more information, see Setting the Monitoring Period for an Advanced
Alert on page1.
Note: By default, your escalated alert is always valid.
21. Click Trigger Actions, and then click Add New Action.
22. Select Send an E-mail / Page, and then click OK.
23. Click E-mail/Pager Addresses, and then complete the To, CC, BCC,
Name, and Reply Address fields for your Level 1 contact.
285
24.
l
l
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
Note: You must provide at least one email address in the To field. When
entering multiple addresses in a field, y separate addresses with a comma.
Click Message, and then type the Subject and Message of your escalated
alert email.
Notes:
Messaging is disabled if both Subject and Message fields are empty.
For more information about variables in email subjects and messages, see
Sending an E-mail / Page on page1.
Click SMTP Server, and then provide the Hostname or IP Address of
your SMTP Server and the designated SMTP Port Number.
If your SMTP server requires authentication, check This SMTP Server
If you want to restrict when your escalated alert is valid, check
Execute this Action only between specific hours, and then configure
the appropriate settings.
Note: By default, your escalated alert is always valid. For more information, see Setting the Monitoring Period for an Advanced Alert on page1.
Click Alert Escalation.
Check Do not execute this Action if the Alert has been Acknowledged.
If you want to execute the action repeatedly as long as the trigger condition exists, check Execute this Action repeatedly while the Alert is
Triggered, and then provide an appropriate action execution interval.
If you want to delay alert action execution, check Delay the execution
of this Action, and then provide an appropriate interval the alert engine
should wait after the alert condition is met before the alert action is
executed.
Note: Typically, if you are configuring the first level alert, you should leave
this option unchecked. If you are configuring the second level alert, check
this option and provide the desired delay between the first and second notifications. If you are configuring the third level alert, check this option and
provide the desired delay between the first and third notifications.
Click OK.
If you want your escalated alert to perform any actions upon reset,
click the Reset Action tab, and then configure appropriate actions. For
more information, see Setting a Reset Action for an Advanced Alert on
page1.
If you are finished configuring your escalated alert, click OK.
286
Viewing Alerts from Mobile Devices

NPM is capable of detecting when you are accessing the Orion Web Console
from a mobile device. This mobile alerts view allows you to view and
acknowledge existing active alerts.
To view and acknowledge alerts from a mobile device:
1. Using a browser on your mobile device, log in to your Orion Web Console
as a user with alert management rights.
2. Click Alerts in the Views toolbar.
Note: If you want to view the mobile alerts view from a desktop or server
browser, add ?IsMobileView=true to the URL of the Alerts view in your Orion
Web Console.
3. Check alerts you want to acknowledge, and then click Acknowledge.
Clickable links in alert messages provide more information about triggered alerts.
287
Chapter 19: Creating and Viewing

ReportsCore
Over time, your NPM database accumulates a great deal of information.
SolarWinds offers both a broad array of predefined reports and a web-based
interface that enables you to create your own custom reports. The web console
reports interface includes powerful tools to help you format your information and
easily preview your reports before you display them. When you have finished
editing your reports, you can view and then print them with the click of a button.
Note: Reports may be enhanced with the use of custom properties. For more
information, see Creating Custom PropertiesCore on page1.
The following sections provide detailed information related to creating, viewing,
and managing SolarWinds reports:
l
l
l
l
l
l
l
l

Viewing Reports
Using Report Writer

The following sections provide descriptions of the reports that are immediately
available with your SolarWinds installation. These reports may be modified, as
necessary, to suit your network performance reporting requirements.
Note: If the report you require is not listed in any of the following sections, you
can create your own custom report in the web console. For more information
about creating your own custom reports, see Creating Reports in the Web
Console on page1.
Availability
The following network availability reports are provided by default with Orion.
288

Availability Last Month
Displays the IP address and average availability of all monitored nodes
over the last month.
Availability This Year
over the last year.
Availability Yesterday
over the previous day.
Availability of Entire Network Last Month
Displays the availability of all monitored nodes on the entire network over
the last month.
Top 25 Percent Down Last Month
Displays the top 25 nodes, by percent downtime, over the last month.
Current Node Status

The following node status reports are provided by default with Orion.
Average Response Time
Displays both average and peak response times for all monitored nodes.
Current CPU Load
Displays current CPU load percentage for all monitored nodes with CPUs.
Current Response Time
Displays the IP address and current, average, and peak response times for
all monitored nodes.
Current Status of each Node
Displays the IP address and a verbal statement of the current operational
status of all monitored nodes.
Down Nodes
Displays all monitored nodes that are currently down.
Last Boot Time for each Node
Displays the machine type and the date and time of last boot for all nodes.
289

Orion provides an Available Space on each Volume report by default. This
report displays the volume size, available space on the volume, and a percentage
measure of the available space on the volume for all monitored volumes.
Volumes are listed beneath their respective parent nodes.
Daily Node Availability

The following node availability reports are provided by default with Orion.
Availability - Last Month
Displays the IP address and average daily availability of all monitored
nodes over the current month.
Availability - This Month
nodes over the current month.
Availability - This Year
nodes over the last 12 months.
Availability - Yesterday
nodes over the previous day.
Events
The following network events reports are provided by default with Orion.
All Down Events
Displays a list of all events in the database involving nodes that have
stopped responding to polling over the last 12 months. For each down
event, this report displays the down event date and time, the node name
and IP address, and a verbal statement of the down event.
Down Events - Windows Devices
Displays a list of all events in the database involving Windows devices that
have stopped responding to polling over the last month. For each down
event, this report displays the down event date and time, the node name,
and a verbal statement of the down event.
Last 250 Events
290

Displays the last 250 events involving any monitored device. For each
event, this report displays the event date and time, the node involved, and a
message describing the event.
Nodes that went down - Last 24 Hours
Displays a list of all nodes that have stopped responding over the last 24
hours. For every event of a node going down, this report displays the event
date and time, an icon representing the current node status, the node name,
and a verbal statement of the down event.
Triggered Alerts - Last 30 Days
Displays a list of all triggered alerts over the past 30 days. For each
triggered alert event, this report displays the date and time of the alert
trigger, the node that triggered the alert, and a message describing the
triggered alert event.
Triggered and Reset Alerts - Last 30 Days
Displays a list of all triggered and reset alerts over the past 30 days. For
each triggered or reset alert event, this report displays the date and time of
the alert event, the node that triggered or reset the alert, and a message
describing the alert event.
Historical CPU and Memory Reports

Orion provides a CPU Load - Last Month report by default. This report displays
the vendor icon and average and peak CPU load percentages for all monitored
nodes with CPUs over the previous calendar month.
Historical Response Time Reports

The following response time reports are provided by default with Orion.
Response Time - Last Month
Displays average and peak response times for all monitored nodes over the
previous calendar month.
Response Time - Top 10 Last Month
Displays the average and peak response times for the top ten monitored
nodes over the previous calendar month.
291

NPM provides the following VMware ESX Server performance reports by default
with Orion.
Network Traffic by VM for Last 7 Days
For each monitored VMware ESX Server, this report displays the average
daily network traffic on the ESX Server per hosted VM for the last 7 days.
Network Traffic by VM for Last Month
daily network traffic on the ESX Server per hosted VM for the last month.
Percent of CPU by VM for Last 7 Days
daily CPU load on the ESX Server due to each hosted VM for the last 7
days.
Percent of CPU by VM for Last Month
daily CPU load on the ESX Server due to each hosted VM for the last
month.
Percent of Memory by VM for Last 7 Days
daily memory load on the ESX Server due to each hosted VM for the last 7
days.
Percent of Memory by VM for Last Month
daily memory load on the ESX Server due to each hosted VM for the last
month.
Percent of Time Running vs. Stopped
For each monitored VMware ESX Server, this report displays both the
percentage of time that each hosted VM has been running and the
percentage of time that each hosted VM has been stopped.
Groups: Current Groups and Groups Members Status

The following group and group members status reports are provided by default
with Orion.
292

Current Status of each Group
Current Status of each Group
Current Status of each Group Member
Current Status of each Group Member
Groups and Group Members
Groups and Group Members
Groups: Daily Group Availability

The following group availability reports are provided by default with Orion.
Group Availability Last Month
Group Availability Last Month
Group Availability This Month
Group Availability This Month
Group Availability This Year
Group Availability This Year
Groups: Group Availability (with members)

The following group availability reports that include member availability are
provided by default with Orion.
Group Availability (with members) Last Month
Group Availability (with members) Last Month
Group Availability (with members) This Month
Group Availability (with members) This Month
Group Availability (with members) This Year
Group Availability (with members) This Year
Groups: Historical Groups Status

The following historical group status reports are provided by default with Orion.
Historical Status of each Group Last 7 Days
Historical Status of each Group Last 7 Days
Historical Status of each Group Last Month
293

Historical Status of each Group Last Month
Historical Status of each Group This Month
Historical Status of each Group This Month

Orion provides an Average Disk Space Used - Last 12 Months report by default.
For all monitored volumes, this report displays the volume type and size,
percentage of the volume space that is currently available, amount of the
available space that is currently used, and the amount of volume space that is
currently available. Volumes are listed beneath their respective parent nodes.
Inventory
The following network inventory reports are provided by default with Orion.
All Disk Volumes
For all monitored volumes, this report displays the volume type and size,
available space on the volume, amount of the available space that is
currently used, and the peak amount of the available space that has been
used on the volume, with the month in which peak usage occurred, over the
last 12 months. Volumes are listed beneath their respective parent nodes.
Device Types
Displays a list of monitored machine types and the number of each type that
are currently monitored.
IOS Versions of Cisco Devices
For all monitored Cisco devices, this report displays the device name,
machine type, and Cisco IOS Version and Image.
Viewing Reports
All reports, custom or predefined, are available for viewing in both the Orion Web
Console and in Report Writer, as shown in the following procedures:
l
l

Note: By default, no report folder is configured for newly created users. If a new
user is not seeing reports, you may need to select a Report Folder for the new
294

user. For more information, see Configuring an Account Report Folder on
page1.

The following procedure opens reports for viewing in the Orion Web Console.
To view reports in the Orion Web Console:
1.Click Start> All Programs> SolarWinds Orion> Orion Web Console.
2.Log in to the Orion Web Console, and then click Home> Reports.
3.Select an appropriate report grouping in the Group by: field.
4.Check the report you want to view, and then click View Report.
It is also possible to include a report within a web console view as a Report from
Orion Report Writer resource. For more information about adding the Report from
Orion Report Writer resource, see Editing Views on page1.

The following procedure opens reports for viewing in the NPM Report Writer.
To view reports with NPM Report Writer:
Mapping> Report Writer.
2.If report groups are not already expanded in the left pane, click + next to a
report group name to expand the group, and then click the title of the report you
want to view.
3.Click Preview.

Highly customizable reports, featuring the same charts, tables, gauges and
resources that are available in web console views, may be created directly from
the web console. These web-based reports feature a more flexible layout and
more extensive content options than reports created with the Orion Report Writer
application.
Note: Orion Report Writer is still available for creating and viewing reports. For
more information, see "Using Report Writer" on page1.
There are two approaches to creating a new report in the web console:
295

l
If you want to modify an existing web-based report, see "Modifying an

Existing Web-Based Report" on page1.
Note: This is the recommended approach for new users.
If you want to create a completely new report, see "Creating a New
Web-Based Report" on page1.

Modifying an existing web-based report is often the simplest way to generate a
new report. The following procedure modifies an existing web-based report to
create a new web-based report.
Note: This is the recommended approach for new users.
To modify an existing web-based report:
1.
2.
3.
4.
5.
6.
a.
b.
9.
Log in to the Orion Web Console.

Click Home> Reports.
Click Manage Reports.
Click the Type column header to sort the list of existing reports.
Note: You may only edit web-based reports in the web console.
Check the web-based report you want to use as the basis for your new
report, and then click Edit Report.
If you want to change the size of your new report, either click Fit to window width to fit the new report to the current browser window, or enter a
new value, in pixels (px), in the Report width field.
In the Header area, configure your new report as follows:
a. Edit the Title and Subtitle, as required.
b. If you want to replace the current logo, confirm that Logo is
checked, and then click Browse for logo to select your new
logo.
In the Content area, configure your new report as follows:
Either select your desired Page Layout from the dropdown or provide
the desired number of Layout columns.
For each column, click Add Content to add appropriate elements to
your report. For more information about adding content to report
columns, see "Adding Content to a Web-Based Report Column" on
page1.
If you want to include a footer in your report, confirm that Footer is
checked, and then complete the following steps.
l If you want to automatically include the report creation date in
the footer, confirm that Creation date is checked.
296

If you want to provide custom text in the footer, confirm that
Custom text is checked, and then provide the text you want to
include.
10. Click Next.
11. If the report preview is not acceptable, click Back, and then make
required edits, as indicated in previous steps.
12. If the report preview is acceptable, click Next.
13. If you want to store this report as one of your Favorite Reports, check
My Favorite Reports.
Notes:
Marking a report as a favorite promotes it to the top of any reports list
in which it appears.
You can also click the star next to any report to mark it as a favorite.
14. Provide an appropriate Report Description.
15. Select an appropriate Report Category.Note: This report will be
included in the selected Group by category on the Manage Reports
view.
16. If there are any defined custom properties that may apply to this
report, they are listed in the Custom Properties area. Provide appropriate values for all listed custom properties.
17. If you want to apply or change limitations for this report, expand
Report Limitation, and then select an appropriate Report limitation category. Note: Web-based reports are limited on the basis of assigned
report limitation categories. Users may be assigned specific report limitation categories, and they may only view reports that are in the same
report limitation category.
18. If you want to regularly schedule creation or email distribution of this
report, click + to expand More info and then complete the provided instructions.
19. Click Submit.
l

Modifying an existing web-based report is often the simplest and most direct way
to create a new report, but creating an entirely new web-based report is only
moderately more difficult. The following procedure creates a completely new webbased report.
To create a new web-based report:
1. Log in to the Orion Web Console.
2. Click Home> Reports.
297

3. Click Manage Reports.
4. Click Create a New Report.
5. Select and add at least one resource. For more information about adding
content to Web-based reports, see "Adding Content to a Web-Based
Report Column" on page1.
6. Check the web-based report you want to use as the basis for your new
report, and then click Edit Report.
7. If you want to change the size of your new report, either click Fit to window width to fit the new report to the current browser window, or enter a
new value, in pixels (px), in the Report width field.
In the Header area, configure your new report as follows:
c. Edit the Title and Subtitle, as required.
d. If you want to replace the current logo, confirm that Logo is
checked, and then click Browse for logo to select your new
logo.
In the Content area, configure your new report as follows:
c. Either select your desired Page Layout from the dropdown or provide
the desired number of Layout columns.
d. For each column, click Add Content to add appropriate elements to
your report. For more information about adding content to report
columns, see "Adding Content to a Web-Based Report Column" on
page1.
10. If you want to include a footer in your report, confirm that Footer is
checked, and then complete the following steps.
l If you want to automatically include the report creation date in
the footer, confirm that Creation date is checked.
l If you want to provide custom text in the footer, confirm that
Custom text is checked, and then provide the text you want to
include.
11. Click Next.
12. If the report preview is not acceptable, click Back, and then make
required edits, as indicated in previous steps.
13. If the report preview is acceptable, click Next.
14. If you want to store this report as one of your Favorite Reports, check
My Favorite Reports.
Notes:
Marking a report as a favorite promotes it to the top of any reports list
in which it appears.
You can also click the star next to any report to mark it as a favorite.
298

15. Provide an appropriate Report Description.
16. Select an appropriate Report Category.Note: This report will be
included in the selected Group by category on the Manage Reports
view.
17. If there are any defined custom properties that may apply to this
report, they are listed in the Custom Properties area. Provide appropriate values for all listed custom properties.
18. If you want to apply or change limitations for this report, expand
Report Limitation, and then select an appropriate Report limitation category. Note: Web-based reports are limited on the basis of assigned
report limitation categories. Users may be assigned specific report limitation categories, and they may only view reports that are in the same
report limitation category.
19. If you want to regularly schedule creation or email distribution of this
report, click + to expand More info and then complete the provided instructions.
20. Click Submit.
Adding Content to a Web-Based Report Column

Web-based reporting allows you to include any web console resource in your
new web-based report, as indicated in the following procedure.
Note: The following procedure assumes that you are already creating or editing a
report in the web console report Layout Builder. For more information, see
"Creating Reports in the Web Console" on page1.
To add content to a web-based report column:
1. Click Add Content in the column to which you add a new report resource.
2. Select a resource grouping criterion in the Group by: field.
Note: The Classic category grouping provides the most comprehensive
list of available resources.
3. Select the desired resource group from the list in the left pane.
4. Select the desired resource from the list in the main pane.
5. Click Select and Continue.
6. Select a network object grouping criterion in the Group by: field.
7. Expand the list of network objects as required to view the objects on which
you want to report.
8. Select the objects on which you want to report, and then click Add to Layout.
299

Web-based reporting allows you to include custom chart resources in your new
web-based report, as indicated in the following procedure.
To add a custom chart to a web-based report column:
1. Click Add Content in the column to which you want to add a custom chart.
2. Select Reports in the Group by: field.
3. Select Custom Chart in the resource list, and then click Select and
Continue.
4. If you want to create a chart for a predefined group of objects, select
Use previously specified objects, and then select the predefined object
group you want to chart.
5. If you want to create a chart for a new, custom group of objects, select
Create new object selection, and then select the objects you want to
chart using one of the following Selection methods:
a. If you know precisely which objects you want to include in your
chart, select Specific Objects (static selection).
Note: This is the most straightforward selection method, but it is limited because the defined object group is static.
b. If you want to select objects based on object properties, select
Dynamic Query Builder.
Note: This is the preferred selection method for groups of objects of
a specified type that may change over time, and it is the preferred
selection method for most types of reports. "All Cisco nodes in
Austin" is an example of a group best defined using the Dynamic
Query Builder.
c. If you are comfortable querying your SolarWinds database directly, you may select Advanced DataBase Query (SQL, SWQL) to
use custom SQL or SWQL queries to define your object group.
Note: This method is only intended for more advanced users.
6. If you selected the Specific Objects (static selection) method, select
objects as indicated in the following steps:
a. Select the object type to chart from the Show dropdown.
b. Select an appropriate grouping criterion from the Group by dropdown.
300

c. Select objects by checking or expanding appropriate groups, and
checking objects to chart.
d. After selecting all objects to chart, provide a name for the selected
group of objects in the Selection Name field
e. Click Add to Layout.
7. If you selected the Dynamic Query Builder method, define objects to
chart as indicated in the following steps:
a. Select the type of objects to include in your chart.
b. Select the type of selector query you want to use (Basic or
Advanced).
Note: Though the Advanced Selector provides access to all network object characteristics, the Basic Selector provides access to a
smaller subset of the most frequently used network object characteristics.
c. Build conditions to define your selection group, as follows:
i. Select whether All child conditions must be satisfied
(AND) or if only At least one child condition must be satisfied (OR).
ii. Select an object characteristic, an appropriate relation, and
then provide a value.
Note: The Advanced Selector enables you to select any database column name as a selection condition.
iii. Add additional conditions, as required, to define your object
group.
group of objects in the Selection Name field, and then click Add to
Layout.
8. If you selected the Advanced Database Query (SQL. SWQL), provide a
selection query, as follows:
a. Select the Query Type (SWQL or SQL).
Note: For more information about SWQL and SQL queries, click
How to use SWQL / SQL.
b. Enter a query, and then click Preview Results to confirm that your
query provides expected results.
c. After confirming that your query provides expected results, provide a
name for the selected group of objects in the Selection Name field.
d. Click Add to Layout.
301

Web-based reporting allows you to include custom table resources in your new
web-based report, as indicated in the following procedure.
To add a custom table to a web-based report column:
1. Click Add Content in the column to which you want to add a custom table.
2. Select Reports in the Group by: field.
3. Select Custom Table in the resource list, and then click Select and
Continue.
4. If you want to create a table for a predefined group of objects, select
Use previously specified objects, and then select the predefined object
group you want to include in your table.
5. If you want to create a table for a new, custom group of objects, select
Create new object selection, and then select the objects you want to
include in your table using one of the following Selection methods:
a. If you know precisely which objects you want to include in your
table, select Specific Objects (static selection).
Note: This is the most straightforward selection method, but it is limited because the defined object group is static.
b. If you want to select objects based on object properties, select
Dynamic Query Builder.
Note: This is the preferred selection method for groups of objects of
a specified type that may change over time, and it is the preferred
selection method for most types of reports. "All Cisco nodes in
Austin" is an example of a group best defined using the Dynamic
Query Builder.
c. If you are comfortable querying your SolarWinds database directly, you may select Advanced DataBase Query (SQL, SWQL) to
use custom SQL or SWQL queries to define your object group.
Note: This method is only intended for more advanced users.
6. If you selected the Specific Objects (static selection) method, select
objects as indicated in the following steps:
a. Select the object type to include in your table from the Show dropdown.
b. Select an appropriate grouping criterion from the Group by dropdown.
302

c. Select objects by checking or expanding appropriate groups, and
checking objects to include in your table.
d. After selecting all objects to include in your table, provide a name
for the selected group of objects in the Selection Name field.
e. Click Add to Layout.
7. If you selected the Dynamic Query Builder method, define objects to
chart as indicated in the following steps:
a. Select the type of objects to include in your table.
b. Select the type of selector query you want to use (Basic or
Advanced).
Note: Though the Advanced Selector provides access to all network object characteristics, the Basic Selector provides access to a
smaller subset of the most frequently used network object characteristics.
c. Build conditions to define your selection group, as follows:
i. Select whether All child conditions must be satisfied
(AND) or if only At least one child condition must be satisfied (OR).
ii. Select an object characteristic, an appropriate relation, and
then provide a value.
Note: The Advanced Selector enables you to select any database column name as a selection condition.
iii. Add additional conditions, as required, to define your object
group.
group of objects in the Selection Name field, and then click Add to
Layout.
8. If you selected the Advanced Database Query (SQL. SWQL), provide a
selection query, as follows:
a. Select the Query Type (SWQL or SQL).
Note: For more information about SWQL and SQL queries, click
How to use SWQL / SQL.
b. Enter a query, and then click Preview Results to confirm that your
query provides expected results.
c. After confirming that your query provides expected results, provide a
name for the selected group of objects in the Selection Name field.
d. Click Add to Layout.
303
Using Report Writer
Using Report Writer

Before using Report Writer, you must have collected at least a few minutes worth
of data in a database populated with devices you want to monitor. A variety of
reports are included with Report Writer, and icons that precede report names
distinguish available report types. The following procedure starts Report Writer.
To start Report Writer:
2.Click File> Settings.
3.In the General tab of the Report Writer Settings window, select either of the
following as a default viewing mode:
l
Preview displays the report as it will appear in printed form. For more
information, see Preview Mode on page1.
Report Designer is the report creation and editing interface. For more
information, see Design Mode on page1.
Note: You can toggle between Preview and Report Designer modes at any time
by clicking Preview or Design, respectively, on the toolbar.
4.If you want to separate the data for individual network objects with
horizontal lines, click Report Style, and then check Display horizontal lines
between each row.
5.Click OK to exit Report Writer Settings.
Preview Mode
Preview mode shows a report as it will print. When you open a report in Preview
mode, or switch to Preview mode from Design mode, Orion runs the query to
generate the report, and then Report Writer displays the results.
The Preview window toolbar provides the following actions and information:
l
l
l
Current page number and total number of pages in the report.

Page navigation buttons: First Page, Page Up, Page Down, and Last Page
Zoom views
Note: Double-click a preview to zoom in and double-right-click to zoom out.

l
Print report
304
Design Mode
Use Design mode to create new reports and modify or rename existing reports.
The options available for both creating and modifying reports are the same.
Design mode options are also dynamic, based upon the type of report, included
report data, and report presentation. Available options differ according to the type
of report that you are designing, but all reports require that you select the data to
include and decide how that data will be sorted, ordered, filtered, and presented.

Use the following procedure to modify or create reports in Report Writer.
To open a report with Report Writer:
1.If you want to modify an existing report, click an existing report from the
inventory in the left pane of the main Report Writer window.
2.If you want to create a new report, click File> New Report, select the type of
report that you would like to create, and then click OK.
Each report offers different configuration options, so, depending on the report,
some formatting tabs described in the following sections may not be available.
Notes:
l
The SQL query used to generate a report may be viewed in an additional

tab. Click Report> Show SQL to add a read-only SQL tab to the Design
window.
A preview of your report is also available at any time. Click Preview to
enter Preview Mode, and then click Design to return to Design Mode.
General Options Tab

The General tab opens by default and shows titling and display options.
To configure General options:
1.Specify the Report Group, Report Title, Subtitle, and Description.
Note: If you use an existing report group name, the new report is added to that
existing group in the left pane of the main window.
2.Select the display Orientation of your report.
3.If you are configuring an historical report and you do not want to group
data by days, clear Group historical data by days.
305

Note: By default, data in some availability and historical reports is grouped by
days when displayed in the Orion Web Console. Data grouping by days is not
viewable in Report Viewer.
4.If you do not want to make this report available on your Orion Web
Console, clear Make this Report available from the Orion website.
Note: By default, most reports are made available for display in the Orion Web
Console. For more information, see Customizing Views on page1.

The Select Fields tab allows you to select the data fields in a report.
To select and configure fields:
1.Click Select Fields.
2.If you are creating a new report or adding fields to an existing report, click
the ellipsis, select Add a new field, and then dynamically define each new report
field as follows:
a.Click the asterisk after Field:, and then select the type of information to include
in the current report field.
b.If you want to sort the data in the current field, click the sort asterisk and
select a sort order.
c.If you want to perform an operation on the data in the current field, click the
function asterisk and select an operation.
3.If you are modifying an existing report, click the Field, sort, or function that
you want to change and select a new value as follows.
a.Click the asterisk after Field:.
b.Select the type of information to include in the current report field.
c.If you want to sort the data in the current field, click the sort asterisk and
select a sort order.
d.If you want to perform an operation on the data in the current field, click the
function asterisk and select an operation.
4.If you want to test your selections as you assemble your report, click
Execute SQL Query to view the current query results.
306

5.If you want to delete a field or rearrange the order of the fields that are
listed in your report, select a field, click Browse (), and then select the
appropriate action.
Note: Unchecked fields are not displayed in your report, but their sort and
function configurations are retained.
6.If you want to preview your report, click Preview.
Filter Results Options Tab

The Filter Results tab allows you to generate filter conditions for field data by
selecting appropriate descriptors from the linked context menus. Results filters
are configured as follows.
To configure results filters:
1.Click Browse (), and then select from the following options:
l
Select Add a new elementary condition to generate a condition that is

based on a direct comparison of network object data fields.
Select Add a new advanced elementary condition to generate a condition based on a comparison of device data fields and values.
Select Add a new complex condition to define a condition that filters
other defined conditions.
Select Delete current condition to remove a selected condition.
Select Move current condition forward or Move current condition backward

to change the order of your conditions accordingly.
Note: The lists of available linked descriptors are dynamically generated in
consideration of all other variables within the same condition. For more
information about condition groups and their application, see Click Start>
SolarWinds Orion> Alerting, Reporting, and Mapping> Advanced Alert
Manager. on page1.
2.Check or clear individual filter conditions to enable or disable their application,
respectively, to your report.
Top XX Records Options Tab

The Top XX tab allows you to limit the number of records that are shown in your
report to either a top number or a top percentage of all results. Top XX options are
configured as shown in the following procedure.
To configure Top XX records:
1.If you want to show all records in your report, select Show All Records.
307

2.If you want to specify a truncated list of eligible items for your report,
complete the following steps:
a.select either Show only the Top number Records or Show the Top
percentage % of Records
b.Provide appropriate number or percentage values.

The Time Frame options tab allows you to limit the scope of your report to a
specific period of time. To configure Time Frame options, select a Named,
Relative, or Specific Time Frame, and then select or provide required values.
Notes:
l If you receive a SQL Timeout error message, you may edit the timeout setting in the SWNetPerfMon.db file. By default, this file is located in the
C:\ProgramFiles\SolarWinds\Orion directory
l Since the Relative Time Frame is continuously variable, reports run with it
may show different results, even if they are run close together in time.
Summarization Options Tab

The Summarization tab allows you to generate summaries of your results over
specific periods of time. Summarization options are configured as follows.
To configure results summarization:
1.If you do not want to summarize your results, confirm that Do not
Summarize the Results is selected.
2.If you want to summarize your results, complete the following steps:
a.Select Summarize the Results by Hour, Date, Month, etc, and then select the
summarization period.
b.Specify the location of the summary field for your report.
c.Select a location for the Summary Date/Time field.
Report Grouping Options Tab

The Report Grouping tab allows you to group results by field descriptor within
your report. Add, edit and delete report groups to organize the data in your report.
Establish and edit report groups as follows.
To add and edit report groups:
308

1.If you want to add a new report group, select a field from the list to define
your group, and then click Add Report Group to add your selected field to the
Report Groups list.
Note: Use up and down arrows to change the grouping order accordingly.
2.If you want to edit an existing report group, select the field from the Report
Groups list, and then click Edit Report Group.
3.The following options may be changed as needed:
l
l
l
l
The Group Header is the text that designates groups on your report.
The Web URL is the dynamic location of your published report with
respect to your Orion Web Console.
Font size, face, color, and background may all be modified by clicking
associated ellipses.
Alignment may be left, center, or right.
Check Transparent Background for better results when publishing your
report to the Web.
If you want to change the grouping order, use the up and down arrows to change
the grouping order accordingly.
Field Formatting Options Tab

The Field Formatting tab allows you to customize the format of the various results
fields in your report. To format results fields, select the field you want to format,
and then edit labels and select options as appropriate.
Notes:
l The formatting options available for each field may be different according
to the nature of the data contained in that field.
l Check Hidden Field to hide any field in your report.
l To view your changes at any time, click Preview.

The image that is displayed at the top and bottom of each report can be changed.
The procedure required to customize a report header or footer depends on the
type of report you are customizing, as follows:
l
l

309

You can customize headers and footers for web-based reports by editing the
report in the web console. For more information about customizing web-based
reports, see "Modifying an Existing Web-Based Report" on page1.

To add your company logo as the report header and footer, save your logo as
Header.jpg in the SolarWinds\Common\WebResources folder, typically located in
C:\Program Files\, and then click Refresh.
Note: The image must be in JPEG format with a height of 150 pixels or less.

SolarWinds provides the Orion Report Scheduler to configure reports for
automatic generation and distribution.
Creating a Scheduled Report Job

The following procedure creates a scheduled report job for regularly printed or
emailed reports.
To schedule a report:
2.Click Reports, and then lick + as required to locate the report you want to
schedule.
3.Click the name of the report you want to schedule, and then copy the URL of the
report you want to schedule.
Mapping> Orion Report Scheduler.
5.Click Edit> Add New Job.
6.Provide a job name for this scheduled report, and then click Continue.
7.Paste the URL of the report you want to schedule into the link field.
8.If you need to provide Windows login credentials to view the report you
are scheduling, click the NT Account login tab, and then provide the user
account details needed to log in.
310

9.If you want to create a printable report that excludes the Orion Web
Console banner and menu bar, on the Orion Web Login tab, check Retrieve a
Printable Version of this Page.
10.If the report you are scheduling requires an Orion user account, on the
Orion Web Login tab, check Send Orion Username / Password in URL, and
then provide the required user credentials to view the Orion report.
11.Click Continue.
12.Configure the scheduling for your report job, and then click Continue.
13.If you want to email the report, complete the following procedure:
a.Confirm that either Email the Web Page (as HTML) or Email the Web Page
(as PDF) are selected, and then click Continue.
b.Provide required email addresses and a subject in the appropriate fields on the
Email To tab.
c.Provide a name and reply address on the Email From tab.
d.On the SMTP Server tab, type the hostname or IP address and confirm the port
number of the server used to send email from the Orion server.
e.Click Continue.
14.If you want to print the report, complete the following steps:
a.Select Print the Web Page, and then click Continue.
b.Select the Printer, Orientation, and number of Copies you want to print.
c.Click Continue.
15.Enter the user name and password for the Windows account that will email the
report.
16.Click Continue.
17.Add any additional comments or notes about this job, and then click Finish.
Using Orion Report Scheduler with HTTPS

If you are using HTTPS to view reports in the Orion Web Console, your HTTPS
server may require the Orion Report Scheduler to provide a trusted certificate
before the requested report may be printed or sent. To use Orion Report
Scheduler with HTTPS, either provide valid certificates to all users accounts
requesting reports from the HTTPS server using Orion Report Scheduler or
311

disable certificate checking in each of the browsers used by your Orion Report
Scheduler users, as shown in the following procedure.
To disable certificate checking:
1.If you are configuring Mozilla Firefox, complete the following steps:
a.Open Mozilla Firefox on the user computer,and then click Tools> Options.
b.Click Advanced, and then click the Encryption tab.
c.In the Protocols area, clear both Use SSL 3.0 and Use TLS 1.0.
d.In the Certificates area, select Select one automatically, and then click
Validation.
e.Clear the option Use the Online Certificate Status Protocol (OCSP) to
confirm the current validity of certificates, and then click OK.
2.If you are configuring Internet Explorer, complete the following steps:
a.Open Internet Explorer on the user computer.
b.Click Tools> Internet Options, and then click the Advanced tab.
c.In the Security section, confirm that the following options are cleared:
Check for publishers certificate revocation
Check for server certificate revocation (requires restart)
Warn about invalid site certificates
d.Click OK.

The following known issues have been encountered while using the Orion Report
Scheduler.
Printing Web Pages from Report Scheduler
If any warning dialogs are open on the Orion server when a web page is
scheduled for printing in Report Scheduler, the print job may not complete. To
ensure that print jobs configured in the Report Scheduler complete, confirm the
following:
l
Print the Web Page is selected when the scheduled task is configured in
Report Scheduler.
All open dialogs, including SWToolset.exe and javascript warnings, are
closed.
312
All scheduled print tasks are configured to run even when the current user
is not logged in.
Orion Report Scheduler and Internet Explorer Enhanced Security

When Internet Explorer (IE) Enhanced Security Configuration is installed, Orion
report Scheduler may hang intermittently when attempting to perform a scheduled
report print job. To address this issue, complete either of the following
procedures:
l
(Recommended) Add the Orion Web Console as a trusted site in your

browser. For more information about Internet Explorer Enhanced Security
Configuration and adding sites to the trusted sites list, see the microsoft
document, "Adding Sites to the Enhanced Security Configuration Zones".
Uninstall IE Enhanced Security Configuration.

SolarWinds reports respect Orion Web Console account limitations. For security,
by default, reports are not available to users with limited accounts unless an Orion
administrator specifically provides access. The following procedure creates a
reports folder for an account-limited user and configures the account-limited user
to access Orion reports from it.
Note: For more information about creating user accounts, see Creating New
Accounts on page1. For more information about applying account limitations to
user accounts, see Setting Account Limitations on page1.
To allow account-limited users access to reports:
1.Open the Orion Reports folder.
Note: All reports created or predefined in Orion Report Writer are, by default,
stored, in C:\Program Files\Solarwinds\Orion\Reports.
2.Create a new folder using the name of the account-limited user.
3.Copy the reports you want the account-limited user to see from the Orion
Reports folder into the new, account-limited user folder.
5.Log in to the Orion Web Console as an administrator.
6.Click Settings in the top right of the web console.
313

7.Click Manage Accounts in the Accounts grouping of the Orion Website
8.Select the account-limited user, and then click Edit.
9.In the Default Menu Bar and Views section, select the Report Folder you
created in the Orion Reports folder for the account-limited user.
10.Click Submit.
Example Device Availability Report Report

Writer
The following procedure generates an example report of network device
availability information over the previous week. The final report is sorted so that
the worst errors are viewed first. Down nodes that are still down are at the top with
all devices listed in order of increasing availability.
Note: At any point during the creation of a report (or perhaps at many points), you
may save what you have done by clicking File> Save. The first time you save
you must give your report a filename or accept the default, which will be the report
title that you assign in the following procedure.
To generates an example report of network device availability information:
and Mapping> Report Writer.
2. Click File> New Report.
3. The example calls for a report on availability over the past week, so select
Historical Availability Details, and then click OK.
314

4. Type My Reports in the Report Group field, and then enter Last Weeks Availability as the Report Title.
5. Select Portrait for the paper orientation, and then confirm that Make this
Report availablefrom the Orion website is checked.
6. Click Select Fields.
7. Click Browse (), and then select Add a new field.
315

8. Click the Field asterisk, and then select Network Nodes> Node Details>
Node Name.
10. Click the Field asterisk, and then select Network Nodes> Node Status>
Status Icon.
Note: While this field makes a distinct visual difference for a report viewed
in color, it will make little or no difference if printed in black and white.
12. Click the Field asterisk, and then select Network Nodes> Node Status>
Status.
316
13. Click Execute SQL Query to view the report data in the preview window.
Note: The report preview should show information about both current and
historical status. Current status entries must be relabeled to avoid confusion.
14. Click Field Formatting.
15. Click Status in the Select a Field list, and then change the Column
Header entry to Current Status.
317
16. Click Status_Icon in the Select a Field list, and then change the Column
Header entry to Current Status.
17. Click Execute SQL Query.
Note: Column widths are adjustable. To change a column width, place
your cursor on the column divider and drag it to a different position.
18. Click Select Fields.
19. Click the sort asterisk on the Status field line, and then select
descending.
20. Click Execute SQL Query to confirm your choice.

22. Click the Field asterisk, and then select Historical Response Time and
Availability> Availability.
318
23. Click the sort asterisk on the new line, and then select ascending.
24. Click Execute SQL Query to view the report.
25. Click Time Frame.
26. Select Relative Time Frame, type 7 in the text field, and then select Days
from the list.
27. If you want to break down the report day-by-day, click Summarization
and specify your choices.
319
28. If you want to filter your report, click Filter Results and specify filter rules,
as on the Select Fields tab.
29. Click File> Save to save your work.
320
Chapter 20: Monitoring Syslog

MessagesCore
Syslog messages are one type of realtime notification that network devices can
send in response to designated events. Orion provides the SolarWinds Syslog
Service to receive Syslog messages on UDP port 514 from any monitored
network device. The SolarWinds Syslog Service also has the ability to open
multiple connections to your SQL server, so it can handle large numbers of
simultaneously incoming Syslog messages from all your monitored devices.
Received messages are then decoded and stored in the Orion database. Until
they are acknowledged, messages may be viewed either in the web console
Syslog view or in Syslog Viewer. The Syslog view in the web console provides
quick access to current messages, filtered by any or all of the following criteria:
l
l
l
Name or type of network object sending the message.

Message Severity, Facility, Type, or Pattern
Time Period in which the message was sent.
Syslog Viewer allows you to tailor your view of Syslog messages using custom
rules. Additionally, Syslog Viewer gives you the ability both to search your Orion
database and to configure Syslog-specific alerts for received Syslog messages.
Notes:
l
When configuring your network devices to send Syslog messages, confirm

that messages are sent to the IP address assigned to your NPM server. To
ensure the proper configuration of a network device for Syslog messaging,
refer to the documentation supplied by the device vendor.
As a benchmark, a typical SolarWinds installation can process approximately 1 million Syslog messages per hour, which is equivalent to about
300 Syslog messages per second. Higher capacity can only be achieved
with significant hardware improvements over minimum SolarWinds requirements.
321
Configuring the Orion Syslog Port

Orion listens for Syslog messages on port 514 (UDP). You can configure this port
in the SyslogService.exe.config file, as indicated in the following procedure.
Note: Running the Configuration Wizard will revert any and all changes made to
the SyslogService.exe.config file. If you run the Configuration Wizard, you must
repeat this procedure to restore your required port setting.
To configure the Syslog port:
1. Log on to your Orion server using an account with administrative privileges.
2. Open SyslogService.exe.config in a text editor.
Note: By default, SyslogService.exe.config is located in C:\Program
Files\SolarWinds\Orion\Orion\SyslogService\.
3. Locate the following line:
<add key="UDPListenPort" value="514">
4. Edit value="514" as required to
indicate the port on which your monitored

devices are configured to send Syslog messages to your Orion server.
5. Save SyslogService.exe.config.
Syslog Messages in the Web Console

The Orion Web Console provides both Syslog-specific resources and a Syslog
view that provides a table of Syslog messages received by your Orion server. The
following sections provide an overview of available Syslog resources and
procedures for viewing and acknowledging Syslog messages within the Orion
Web Console.
Syslog Resources
NPM provides the following Syslog-related resources for inclusion within web
console views.
Advanced Syslog Counts
Every Syslog message has a designated severity. For more information
about Syslog severities, see Syslog Severities on page1. The Advanced
Syslog Counts resource groups by severity all Syslog messages received
by the currently viewed node. For each severity, this resource provides the
number of received Syslog messages.
Advanced Syslog Parser
322

The Advanced Syslog Parser resource provides a comprehensive view of
the Syslog messages most recently received by the viewed node. The most
recent messages of each severity are listed. For more information about
Syslog severities, see Syslog Severities on page1.
Advanced Syslog Summary
The Advanced Syslog Summary resource groups by message type all
Syslog messages received by the currently viewed node, where the
message type is encoded in the Syslog message packet. For each
message type, this resource provides the severity, the hostname or IP
address of the message originator, and the total number of Syslog
messages received.
Last 25 Syslog Messages
The Last 25 Syslog Messages resource provides a list of the last 25 syslog
messages that have been sent by monitored network devices to the viewed
node. For each message, this resource presents the date and time the
message was sent, the hostname and IP address of the device sending the
message, and the message text.
Clicking the hostname, IP address, or message text opens the
corresponding Object Details page, providing extensive diagnostic
information about the monitored network object sending the message.
Clicking Edit opens the Edit Last 25 Syslog Messages page where you can
set the maximum number of displayed messages, select the time period for
viewing messages, and establish filters to limit the messages this resource
displays. For more information, see Using Node Filters on page1.
Syslog Summary
The Syslog Summary resource lists the number of Syslog messages
received by the viewed node from monitored network devices over a
specified period of time.

You can customize the list view by using the following procedure to select your
preferred message grouping criteria.
To view Syslog messages in the Web Console:
2. Log in to the Orion Web Console, and then click Syslog in the Views toolbar.
323

3. If you want to view Syslog messages for a specific Syslogenabled network object, specify the selected object in the Network Object field.
Note: Only objects that have sent a Syslog message to the Orion server
will be listed in this field.
4. If you want to filter your Syslog messages table by device type, select
the type to which you want to limit your view in the Type of Device field.
5. If you want to filter your Syslog messages table by severity, select the
severity level to which you want to limit your view in the Select Severity
field.
Note: For more information, see Syslog Severities on page1.
6. If you want to filter your Syslog messages table by facility, select the
facility to which you want to limit your view in the Select Facility field.
Note: For more information, see Syslog Facilities on page1.
7. If you want to limit your Syslog messages table to show only messages of a designated type, type the appropriate string in the Message
Type field.
8. If you want to limit your Syslog messages table to show only messages containing a designated pattern, provide the appropriate string in
the Message Pattern field.
Note: An asterisk (*) is required as a wildcard character, both before and
after the pattern string, unless the provided pattern is the beginning of the
message, the end of the message, or the full message.
9. If you only want to see Syslog messages from a specific period of
time, select a time period from the Time Period menu.
10. Confirm the number of messages displayed in the Show Messages field.
11. If you want cleared or acknowledged messages to remain in the Syslog view, check Show Cleared Messages.
12. Click Refresh to update the Syslog messages list with your new settings.
Acknowledging Syslog Messages in the Web Console

Acknowledging Syslog messages is straightforward in the Orion Web Console,
as shown in the following procedure.
To acknowledge Syslog messages in the Orion Web Console:
1.
2.
3.
4.
Click Start> All Programs> SolarWinds Orion> Orion Web Console.

Log in to the Orion Web Console.
Click Syslog in the Views toolbar.
Provide filter criteria for the Syslog messages table. For more information,
see Viewing Syslog Messages in the Web Console on page1.
5. Click Refresh to ensure that all selected view criteria take effect.
324

6. Check the messages you want to acknowledge, and then click Clear
Selected Messages.

Orion also provides the standalone Syslog Viewer application for viewing and
acknowledging Syslog messages on your network. Syslog Viewer collects
Syslog messages from your network and presents them in a readily reviewable
and searchable list so that you can easily monitor your network. The following
sections provide a guide to using the Syslog Viewer application for viewing,
acknowledging, and triggering alerts in response to Syslog messages on your
network.
To open the Syslog Viewer, click Start> All Programs> SolarWindsOrion>
Syslog and SNMP Traps> Syslog Viewer.
Viewing and Acknowledging Current Messages

The Syslog Viewer makes it easy to view and acknowledge messages. The
following procedure views and then acknowledges current Syslog messages.
To view and acknowledge current Syslog messages:
1. Click View> Current Messages.
2. Acknowledge current messages using either of the following methods:
l Right-click any message, and then select Acknowledge Selected.
Add an Acknowledged column to the Syslog Viewer, and then check each
message that you want to acknowledge. For more information, see Syslog
Server Settings on page1.
Searching for Syslog Messages

Collected Syslog messages may be searched within Syslog Viewer. The
following steps both search for Syslog messages and format search results.
To search the Syslog message list:
1.
2.
3.
4.
Click View> Search Messages.

Enter appropriate search criteria.
Click Search Database.
If you want to group messages for easier navigation, select the type of
grouping from the Grouping list.
Note: Messages can be acknowledged in the search results just as they
325

can be acknowledged in the Current Messages view. For more information, see Syslog Server Settings on page1.
5. If you want to limit the number of messages that are shown, enter or
select a number in the Maximum number of messages to display field.
6. If you want to view messages that meet your search criteria as they
arrive, select a number for the Auto Refresh every number seconds
field.
Note: Auto Refresh is only available when you are viewing current messages. The Date/Time Range must be set to Today, Last 24 Hours, Last
2 Hours, or Last Hour.
Syslog Server Settings

Use the following procedure as a guide to starting and configuring the Syslog
Viewer.
To start and configure the Syslog Viewer:
1. Click Start> All Programs> SolarWindsOrion> Syslog and SNMP
Traps> Syslog Viewer.
3. Click the General tab in the Syslog Server Settings window.
4. Adjust the Maximum number of messages to display in Current Messages view slider to set the number of messages you want to display.
5. If you want to Automatically Refresh the Current Messages View,
check the option accordingly, and then set the refresh rate with the middle
slider.
6. Adjust Retain Syslog messages for how many days? to set the length of
time Syslog messages should stay in the database.
7. Click the Displayed Columns tab.
8. Use the arrow keys to select and order the fields of information you want to
see in the Current Messages view.
Note: You can make it easier to acknowledge Syslog messages by selecting the Acknowledged column to add to your view.
9. If you want to wrap Syslog message text in the Current Messages
view, check Word wrap long messages.
10. If you do not expect to use Syslog Server as your primary viewer for
Syslog messages, select the Message Parsing tab, and then check the following options:
Note: The following data points are saved within the Syslog tables in your
Orion database. Removing the added data from each record helps you to
proactively reduce the size of your database.
326
Remove embedded Date/Time from Syslog Messages

Remove Message Type from Syslog Messages
Remove Domain Name from DNS Lookups.

The Syslog Viewer can be configured to signal Orion alert actions when Syslog
messages that are received from network devices match defined rules. The steps
in the following procedure establish rules that filter Syslog messages and initiate
alert actions as you determine.
Note: Syslog rules may not be applied to nodes in an unmanaged state. For more
information about designating nodes as unmanaged, see Setting Interface
Management States on page1.
To configure Syslog Viewer filters and alerts:
1. Click Start> All Programs> SolarWindsOrion> Syslog and SNMP
Traps> Syslog Viewer.
3. Click Alerts/Filter Rules.
4. If you are creating a new rule, click Add New Rule.
5. If you are editing an existing rule, select the rule, and then click Edit
Selected Rule.
6. On the General tab, complete the following steps:
a. Provide or edit the Rule Name.
b. Check Enabled.
c. Select appropriate servers from the Apply this Rule to list.
d. Enter the IP addresses or subnets to which this rule applies in the
Source IP Addresses area.
Note: Use the examples provided on this tab to ensure that the list of
source IP addresses is properly formatted.
7. If you want to limit the rule to only messages from specific hosts,
domains, or hostname patterns, on the DNS Hostname tab enter a DNS
Hostname Pattern.
Notes:
l
The DNS Hostname Pattern rule is case-sensitive.
When Use Regular Expressions in this Rule is checked, you may use regular
expressions in place of like statements. For more information about using
regular expressions in NPM, see Regular Expression Pattern Matching on
page1.
327

8. If you want to limit the rule to only specific message types or text
within a Syslog message, on the Message tab enter rules as appropriate
for Message Type Pattern and Syslog Message Pattern.
Notes:
l Use the examples listed on this tab to format the list properly.
When Use Regular Expressions in this Rule is checked, regular expressions
can be used in place of like statements. For more information about using
page1..
9. If you want to apply specific severity or facility types, on the Severity /
Facility tab check the severity and facility types you want to apply.
Note: By default, all message severities and facilities are selected. For
more information about Syslog severities and facilities, see Syslog Message Priorities on page1.
10. If you want to limit rule application to within a specific period of time,
select the Time of Day tab, check Enable Time of Day checking, enter
the time period, and then check the days of the week on which to apply the
rule.
Notes:
l
Enabling Time of Day checking creates more overhead for the CPU.
Messages received outside the specified timeframe will not trigger alerts.
11. If you want to suppress alert actions until a specified number of messages arrive that match the rule, complete the following procedure:
Note: When Suspend further Alert Actions for is checked, alert actions
are not sent until the specified amount of time has expired. Once the time
period has expired, only new alerts are sent. All alerts suppressed during
the time period are discarded.
a. Select the Trigger Threshold tab, and then check Define a Trigger
Threshold for this Rule.
b. Enter option values as appropriate.
12. Configure Syslog alert actions on the Alert Actions tab, as shown in the following steps:
a. If you are associating a new action to the rule, click Add New
Action. For more information about available actions, see Available
Syslog Alert Actions on page1.
b. If you want to edit an existing action for the rule, select an action
from the list, and then click Edit Selected Action.
328

c. Configure the action as appropriate. For more information about available actions, see Available Syslog Alert Actions on page1.
Note: Syslog alerts use a unique set of variables. For more information
about available Syslog variables, see Syslog Alert Variables on
page1.
d. If you need to delete an action, select the action, and then click
Delete Action.
e. Use the arrow buttons to set the order in which actions are performed.
Note: Actions are processed in the order listed, from top to bottom.
f. Click OK to save all changes and return to Syslog Viewer Settings.
13. Use the arrow buttons to arrange the order in which the rules are applied.
Note: Rules are processed in the order they appear, from top to bottom.

The following list provides definitions of the actions available for each Syslog
alert type. For more information about how to assign alert actions, see
Configuring Syslog Viewer Filters and Alerts on page1.
Discard the Syslog Message
Allows you to delete unwanted Syslog messages sent to the Syslog server.
Tag the Syslog Message
Allows you to add a custom tag to received Syslog messages. Ensure you
include the Tag column in the viewer when assigning a tag.
Modify the Syslog Message
Modify the severity, facility, type, or contents of a Syslog message.
Log the Message to a file
Allows you to specify a file and a series of variables with which to tag
Syslog messages sent to the file. Ensure you have already created the log
file you want to use. The alert cannot create a file.
Windows Event Log
Write a message to local or remote Windows Event Logs.
Forward the Syslog message
Specify the IP address or hostname and the port to forward a Syslog event.
Send a new Syslog message
329

Trigger a new Syslog message, sent to a specific IP address or hostname,
on a specific port, with a customizable severity, facility, and message.
Send an SNMP Trap
Allows you to send a trap to an IP address following a specific trap template
and using a specific SNMP community string.
Play a sound
Allows you to play a sound when a matching Syslog message is received.
Text to Speech output
Define the speech engine, speed, pitch, volume, and message to read.
Execute an external program
Allows you to specify an external program to launch using a batch file. This
action is used when creating realtime change notifications in NPM.
Execute an external VB Script
Allows you to launch a VB Script using the selected script interpreter engine
and a saved script file.
Send a Windows Net Message
Allows you to send a net message either to a specific computer or to an
entire domain or workgroup.
Note: The only operating systems supporting Windows Net Messaging on
which SolarWinds supports Orion installations are Windows Server 2003
and Windows XP. SolarWinds only supports evaluation installations of
Orion on Windows XP.
Send an email from a specified account to a specified address, using a
specific SMTP server, and containing a customizable subject and message.
Stop Processing Syslog Rules
Stops the processing of Syslog rules for the matching Syslog message.
Forwarding Syslog Messages

The Syslog message forwarding action allows you to forward received Syslog
messages. Additionally, if you have WinPCap version 3.0 or higher installed on
your NPM server, you can forward Syslog messages as spoofed network packets.
330

The following procedure configures available options for forwarded Syslog
messages.
Note: The following procedure assumes you are editing a Forward the Syslog
Message alert action. For more information about Syslog alert actions, see
Configuring Syslog Viewer Filters and Alerts on page1.
To configure the forward syslog message action:
1. Provide the hostname or IP address of the destination to which you want to
forward the received Syslog message.
2. Provide the UDP Port you are using for Syslog messaging.
Note: The default is UDP port 514.
3. If you want to retain the IP address of the source device, complete the
following steps:
a. Check Retain the original source address of the message.
b. If you want to designate a specific IP address or hostname as the
Syslog source, check Use a fixed source IP address (or hostname),
and then provide the source IP address or hostname.
c. If you want to spoof a network packet, check Spoof Network
Packet, and then select an appropriate Network Adapter.
4. Click OK to complete the configuration of your Syslog forwarding action.

The following variables can be used in Syslog alert messages. Each variable
must begin with a dollar sign and be enclosed in curly braces as, for example,
${VariableName}. Syslog alerts also support the use of Node alert variables. For
more information, see NPM Variables and Examples on page1.
Syslog Date/Time Variables

Syslog Date/Time
Description
Variable
${AbbreviatedDOW} Current day of the week. Three character abbreviation.
AM or PM corresponding to current time (before or after
${AMPM}
noon)
${D}
Current day of the month
${DD}
Current day of the month (two digit number, zero padded)
${Date}
Current date. (Short Date format)
Current date and time. (Windows control panel defined
${DateTime}
Short Date and Short Time format)
331

${DayOfWeek}
Current day of the week.
${DayOfYear}
Numeric day of the year
${H}
Current hour
${HH}
Current hour. Two digit format, zero padded.
${Hour}
Current hour. 24-hour format
${LocalDOW}
Current day of the week. Localized language format.
${LongDate}
Current date. (Long Date format)
${LocalMonthName} Current month name in the local language.
${LongTime}
Current Time. (Long Time format)
${M}
Current numeric month
${MM}
Current month. Two digit number, zero padded.
${MMM}
Current month. Three character abbreviation.
${MediumDate}
Current date. (Medium Date format)
${Minute}
Current minute. Two digit format, zero padded.
${Month}
Full name of the current month
${N}
Current month and day
${S}
Current second.
${Second}
Current second. Two digit format, zero padded.
${Time}
Current Time. (Short Time format)
${Year2}
Two digit year
${Year}
Four digit year
Other Syslog Variables

Syslog Variable Description
${Application}
SolarWinds application information
${Copyright}
Copyright information
${DNS}
Fully qualified node name
${Hostname}
Host name of the device triggering the alert
${IP_Address} IP address of device triggering alert
${Message}
Status of device triggering alert
${MessageType} The name of the triggered alert
A network health score indicating object states as follows:
INTERFACE_UP
=0
${Severity}
NODE_UP
=0
332

INTERFACE_UNKNOWN = 1
INTERFACE _WARNING = 1
INTERFACE _DOWN
= 1000
NODE_UNKNOWN
= 1000000
NODE_WARNING
NODE_DOWN
${Version}
= 1000000
= 100000000
For more information, see Syslog Severities on page1.

Version of the SolarWinds software package

Included at the beginning of each Syslog message is a priority value. The priority
value range spans between 0 and 191 and is enclosed in angle bracket (< and >)
delimiters. The priority value is calculated using the following formula:
Priority = Facility * 8 + Severity
Syslog Facilities
The facility value indicates which machine process created the message. The
Syslog protocol was originally written on BSD Unix, so Facilities reflect the
names of UNIX processes and daemons, as shown in the following table.
Note: If you are receiving messages from a UNIX system, consider using the User
Facility as your first choice. Local0 through Local7 are not used by UNIX and are
traditionally used by networking equipment. Cisco routers, for example, use
Local6 or Local7.
Number Source
Number Source
0
kernel messages
12
NTP subsystem
1
user-level messages
13
log audit
2
mail system
14
log alert
3
system daemons
15
clock daemon
4
security/authorization messages
16
local use 0 (local0)
5
messages generated internally by Syslog 17
6
line printer subsystem
18
7
network news subsystem
19
8
UUCP subsystem
20
9
clock daemon
21
333

10
11
security/authorization messages
FTP daemon
22
23

Syslog Severities
The following table provides a list of Syslog severity levels with descriptions and
suggested actions for each.
Number Severity
0
Suggested Actions
A "panic" condition affecting multiple applications, servers,
Emergency or sites. System is unusable. Notify all technical staff on
call.
A condition requiring immediate correction, for example,
Alert
the loss of a backup ISP connection. Notify staff who can
fix the problem.
A condition requiring immediate correction or indicating a
failure in a primary system, for example, a loss of a primary
Critical
ISP connection. Fix CRITICAL issues before ALERT-level
problems.
Non-urgent failures. Notify developers or administrators as
Error
errors must be resolved within a given time.
Warning messages are not errors, but they indicate that an
error will occur if required action is not taken. An example
Warning
is a file system that is 85% full. Each item must be
resolved within a given time.
Events that are unusual but are not error conditions. These
items might be summarized in an email to developers or
Notice
administrators to spot potential problems. No immediate
action is required.
Normal operational messages. These may be harvested
Informational for network maintenance functions like reporting and
throughput measurement. No action is required.
Information useful to developers for debugging an
Debug
application. This information is not useful during
operations.
334
Syslog Severities
335
Chapter 21: Monitoring SNMP

TrapsCore
SNMP (Simple Network Management Protocol) traps signal the occurrence of
significant events by sending unsolicited SNMP messages to a monitoring
device. The SolarWinds Trap Server listens for incoming trap messages on UDP
port 162 and then decodes, displays, and stores the messages in the NPM
database. The SolarWinds Trap Service allows NPM to receive and process
SNMP traps from any type of monitored network device, and, because the
SolarWinds Trap Service is multi-threaded, it can handle large numbers of
simultaneously incoming traps. As a benchmark, a typical SolarWinds installation
can process approximately 500 traps per second.
Note: Higher capacity can only be achieved with significant hardware
improvements over minimum SolarWinds requirements.
The Trap Viewer application allows you to view traps, to configure trap-specific
alerts, to view and search traps, and to apply powerful trap filtering.
Note: When configuring devices to send SNMP traps, confirm that traps are sent
to the IP address assigned to the NPM server. To ensure proper configuration,
refer to the documentation supplied by the vendor of your devices.
The SNMP Trap Protocol

SNMPv1, SNMPv2c, and SNMPv3, along with the associated Management
Information Base (MIB), allow you to take advantage of trap-directed notification.
When monitoring a large number of devices, where each device may have a large
number of its own connected objects, it can become impractical to request
information from every object on every device. Using traps, each managed device
can notify the NPM SNMP Trap Server of any issues without solicitation. After
receiving a trap, the Trap Viewer displays it, allowing you to choose to take action
or automatically trigger an action based on the nature of the event.
Note: When using SNMPv3 for polling a device and receiving traps from it,
confirm that the same authentication type (auth, noauth, or priv) is configured for
both polling and traps.
336
Viewing SNMP Traps in the Web Console

Customize the Traps view as shown in the following procedure.
To view SNMP traps in the Web Console:
2. Click Traps in the Views toolbar.
3. If you want to filter your traps table view by device, select the device to
which you want to limit your view in the Network Object field.
4. If you want to filter your traps table by device type, select the device
types you want to view in the Type of Device field.
5. If you want to limit your traps table to show only traps of a designated
type, select the appropriate type in the Trap Type field.
6. If you want to limit your traps table to show only traps originating from
a specific IP address, type the IP Address in the Source IP Address
field.
7. If you want to limit your traps table to show only traps with a designated community string, select the appropriate community string in the
Community String field.
8. If you only want to see traps from a specific period of time, select the
time period from the Time Period menu.
9. Confirm the number of traps displayed in the Show Traps field.
10. Click Refresh to update the Traps view with your new settings.
Using the Trap Viewer

After the monitored devices on your network are configured to send traps to the
NPM server, configure the Orion Trap Viewer to display received trap information,
as shown in the following sections.
Notes:
l
To ensure proper configuration of your network devices, refer to the documentation supplied by the vendor of your network devices.
The Orion Trap Viewer receives traps on UDP port 162.
Viewing Current Traps

Trap Viewer makes it easy to view trap messages, as shown in the following
steps.
To view current trap messages:
337
Searching for Traps

1. Click Start> All Programs> SolarWinds Orion> Syslog and SNMP
Traps> Trap Viewer.
2. Click View> Current Traps.
3. Click a column header to order listed traps by the selected trap characteristic.
4. Configure the Trap Viewer by clicking and dragging columns to order the
presentation of trap characteristics.
Searching for Traps

Collected trap messages may be searched within Trap Viewer. The following
steps both search for trap messages and format the search results list.
To search the trap message list:
Traps> Trap Viewer.
2. Click View> Search Traps.
3. Enter appropriate search criteria, and then click Search Database.
4. If you want to group messages for easier navigation, select the type of
grouping from the Grouping list.
5. If you want to limit the number of messages that are shown, enter or
select a number in the Maximum number of messages to display field.
6. If you want to view messages that meet your search criteria as they
arrive, select a number for the Auto Refresh every number seconds
field.
Note: Auto Refresh is only available when you are viewing current messages. The Date/Time Range must be set to Today, Last 24 Hours, Last
2 Hours, or Last Hour.
7. If you want to hide the search criteria pane, toggle the pane open and
closed by clicking the double up arrows in the top right of the page.
Trap Viewer Settings

Use the following procedure to start and configure the Trap Viewer.
To start and configure the Trap Viewer:
Traps> Trap Viewer.
3. On the General tab, configure the following Trap server settings:
a. Position the top slider to set the Maximum number of traps to display
in Current Traps view.
338

b. If you want Orion NPM to Automatically Refresh the Current Traps
View, check the option accordingly, and then position the middle slider
to set the refresh rate.
c. Position the Retain Trap messages for how many days? slider to set
the length of time that traps remain in the database.
4. On the Displayed Columns tab, use the arrow keys to select and order the
fields of information you want to see in the Current Traps view.
5. If you do not need the domain name from your trap messages, check
Remove Domain Name from DNS Lookups on the Message Parsing
tab.
Note: Checking this option will remove the domain name from your trap
messages, and this will help to reduce the size of your database.

The Trap Viewer can be configured to trigger Orion NPM alert actions when
received trap messages match defined rules. The following steps establish rules
to filter trap messages and initiate alert actions as you determine.
Notes:
l
With the exception of the asterisk (*) wildcard, SolarWinds recommends

against using non-alphanumeric characters in filter definitions.
Trap rules are not applied to unmanaged nodes. For more information, see
Setting Interface Management States on page1.
To configure Trap Viewer filters and alerts:

Traps> Trap Viewer.
2. Click File> Settings, and then click the Alerts / Filter Rules tab.
3. If you are creating a new rule, click Add Rule.
4. If you are editing an existing rule, click Edit Rule.
5. Click the General tab.
6. Enter a Rule Name, and then check Enabled to enable the rule.
7. Select appropriate servers from the Apply this Rule to list.
8. Enter the IP addresses or subnets to which this rule applies.
Note: Use the examples listed on this tab to format the list properly.
9. If you want the rule limited to messages from specific hosts, domains,
or hostname patterns, click DNS Hostname, and then enter a DNS Hostname Pattern.
Notes:
l
The DNS Hostname Pattern rule is case-sensitive.
339

When Use Regular Expressions in this Rule is checked, regular expressions
can be used in place of like statements. For more information about using
page1.
10. If you want the rule limited on the basis of content within the Trap
Details field, click Trap Details, and then enter a Trap Details Pattern.
Note: When Use Regular Expressions in this Rule is checked, regular
expressions can be used in place of like statements. For more information about using regular expressions in NPM, see Regular Expression
Pattern Matching on page1.
11. If you want the rule limited to specific community strings, click Community String, and then enter apprporiate patterns in the Community
String Pattern field.
Notes: When Use Regular Expressions in this Rule is checked, regular
expressions can be used in place of like statements. For more information about using regular expressions in NPM, see Regular Expression
Pattern Matching on page1.
12. Click Conditions, and then generate trigger conditions as follows:Note: For
more information about conditions and condition groups, see Click Start>
SolarWinds Orion> Alerting, Reporting, and Mapping> Advanced Alert
Manager. on page1.
l Select appropriate object identifiers and comparison functions from the
linked context menus.
Click Browse () to Insert an OR condition, to Insert an AND condition,
or to Delete a condition as necessary.
13. If you want to limit rule application to within a specific period of time,
click Time of Day, check Enable Time of Day checking, enter the time
period, and then select days of the week on which to apply the rule.
Notes:
l Enabling Time of Day checking creates more overhead for the CPU.
Messages received outside the specified timeframe will not trigger alerts.
14. If you want to suppress alert actions until a specified number of traps
arrive that match the rule, click Trigger Threshold, check Define a Trigger Threshold for this Rule, and then enter option values as appropriate.
Note: When Suspend further Alert Actions for is checked, alert actions
are not sent until the specified amount of time has expired. Once the time
period has expired, only new alerts are sent. All alerts that are suppressed
during the time period will never be sent.
340

15. Click Alert Actions.
16. If you are associating a new action to the rule, click Add New Action,
and then select an action from the list to configure. For more information
about adding alert actions, see See "Adding Basic Alert Actions" on page
114 on page1.
17. If you are editing an existing action for the rule, select an action from
the list, click Edit Action, and then configure the action. For more information about adding alert actions, see See "Adding Basic Alert Actions" on
page 114 on page1.
18. Use the arrow buttons to set the order in which actions are performed.
Note: Actions are processed in the order they appear, from top to bottom.
19. If you need to delete an action, select the action, and then click Delete
Action.
20. Click OK to save all changes and return to Trap Viewer Settings.
21. Use the arrow buttons to arrange the order in which the rules are applied.
Note: Rules are processed in the order they appear, from top to bottom.

The following actions are available for trap alerts. For more information about
assigning and configuring alert actions, see Adding Basic Alert Actions on
page1.
Discard the Trap
Allows you to delete unwanted traps sent to the SNMP Trap server.
Tag the Trap
Allows you to add a custom tag to received traps. Ensure you include the
Tag column in the viewer when assigning a tag.
Flag the Trap with a specific color
Allows you to assign a specific color for display in the Orion Web Console
and the Trap Viewer to flag traps matching the rule.
Log the Trap to a file
Allows you to specify a file and a series of variables with which to tag traps
sent to the file. Ensure you have already created the log file you want to use.
The alert cannot create a file.
Windows Event Log
Allows you to write a message to a local or a remote Windows Event Log.
341

Forward the Trap
Allows you to specify the IP address or hostname and the port on which to
forward the trap. Specify the IP address or hostname of the trap destination
and the port on which the trap should be sent. Check Include Source
Address to include the IP address of the trap source.
Play a sound
Allows you to play a sound when a matching SNMP trap is received.
Text to Speech output
Allows you to define a specific speech engine, the speed, pitch, volume,
and message to read.
Execute an external program
Allows you to specify an external program to launch using a batch file. This
action is used when creating realtime change notifications in NPM.
Execute an external VB Script
Allows you to launch a VB Script using the selected script interpreter engine
and a saved script file.
Send a Windows Net Message
Allows you to send a Windows Net message either to a specific computer or
to an entire domain or workgroup.
Note: The only operating systems supporting Windows Net Messaging on
which SolarWinds supports Orion installations are Windows Server 2003
and Windows XP. SolarWinds only supports Orion evaluations on Windows
XP.
Allows you to send an email from a specified account to an address, using a
specific SMTP server, and containing a customizable subject and message.
Stop Processing Trap Rules
Stops the processing of SNMP trap rules for the matching trap.
Change the status of an interface
Orion NPM can change the status of an interface from which a trap is
received. Designate the status to which .the interface should change.
342
Trap Alert Variables

The following variables can be used in trap alert messages with the NPM Trap
Server. You must begin each variable with a dollar sign and enclose each
variable identifier in curly braces as, for example, ${VariableName}.
Note: Trap alerts may also use any valid node variables. For more information
about node alert variables, see NPM Variables and Examples on page1.
Trap Date/Time Variables

Trap Date/Time
Description
Variable
${AbbreviatedDOW} Current day of the week. Three character abbreviation.
${AbbreviatedMonth} Current month of the year. Three character abbreviation.
AM or PM corresponding to current time (before or after
${AMPM}
noon)
${D}
Current date. (MM/DD/YYYY format)
${DD}
${Date}
Current day, date and time. (DAY NAME MONTH DD,
${DateTime}
YYYY HH:MM AM/PM)
${Day}
${DayOfWeek}
${DayOfYear}
${H}, ${Hour}
Current hour. 24-hour format
${HH}
${LocalDOW}
${LongDate}
Current date. (DAY NAME, MONTH DAY, YEAR)
${LongTime}
Current Time. (HH:MM:SS AM/PM)
${M}
${MM}
${MMM}
${MMMM}
${MediumDate}
Current date. (DAY NAME, MONTH DAY, YEAR)
${MediumTime}
Current Time. (HH:MM:SS AM/PM)
${Minute}
343

${MonthName}
${S}
${Second}
${Time}
${Year}
${Year2}

Date-time to current second (YYYY-MM-DDTHH:MM:SS)
Current Time. (HH:MM AM/PM)
Four digit year
Two digit year

Trap Variable
${Application}
${Community}
${Copyright}
${DNS}
${Hostname}
${IP}
${IP_Address}
Description
Node community string
Host name of the device triggering the trap
IP address of device triggering alert
IP address of device triggering alert
Message sent with triggered trap and displayed in Trap Details
${Message}
field of Trap Viewer
${MessageType} Name or type of trap triggered
Raw numerical values for properties sent in the corresponding
${Raw}
incoming trap.
Raw numerical values for properties sent in the corresponding
${RawValue}
incoming trap. The same as ${Raw}.
${vbData1}
Trap variable binding value
${vbName1}
Trap variable binding name
344
345
Chapter 22: Creating Custom

PropertiesCore
All Orion product installations have access to the Custom Property Editor, which
allows you to add a custom property to any monitored device. Custom properties
are additional fields, such as country, building, asset tag, or serial number, that
you can define and store in your Orion database. After properties are added, they
are available for display and filtering both within the Orion Web Console and
within the Report Writer application. A few more examples of how custom
properties may be used are as follows:
l
l
l
Add information to nodes, such as contact, owner, or support contract.

Add a custom property that is used as an account limitation on nodes.
Add a custom property to nodes for grouping them on the web or in a
report.
Add a custom property and display it as an annotation on a chart.
Custom Property Editor lets you choose from a collection of the most commonly
used properties, or you can build your own custom properties. For more
information, see Managing Custom Properties on page1. Once your custom
property is defined, the Import Wizard allows you to populate your new property
from either a text- or comma-delimited file. For more information, see Importing
Property Data with the Custom Property Editor on page1.
Alternatively, minor changes or edits may be made using the Edit view. For more
information, see Editing Custom Properties in the Custom Property Editor on
page1.
Note: Older versions of SolarWinds Orion Core Services used the Custom
Property Editor application to create and manage custom properties. The Custom
Property Editor is not accessible through the Orion Web Console. For more
information, see "Custom Properties in Older Orion Core Versions" on page1.
Managing Custom Properties

Orion Core 2012.2 introduced a web-based version of the Custom Property
Editor. The following sections provide steps required to manage custom
346

properties in SolarWinds Orion products using Orion Core 2012.2 and higher.
l Assigning Values to a Custom Property
l Importing Custom Property Data
l Removing Custom Properties
l Exporting a Custom Property
Notes:
l Older versions of SolarWinds Orion Core Services used the Custom Property Editor application to create and manage custom properties. The Custom Property Editor is not accessible through the Orion Web Console. For
more information, see "Custom Properties in Older Orion Core Versions"
on page1.
l Custom properties are stored in the SolarWinds database. SQL Server
treats NULL and 0 differently, so, if you are creating a custom property to trigger an alert, confirm that the alert trigger conditions account for this difference. For more information, see the SolarWinds Knowledge Base
article, Unexpected results when you use advanced alerts on custom properties with NULL values.
l

The following procedure provides steps required to create a custom property in
SolarWinds Orion products using Orion Core 2012.2 and higher.
Note: Older versions of SolarWinds Orion Core Services used the Custom
Property Editor application to create and manage custom properties. The Custom
Property Editor is not accessible through the Orion Web Console. For more
information, see "Custom Properties in Older Orion Core Versions" on page1.
To create a custom property:
Manage Custom Properties in the Node & Group Management grouping.
4. Select the object type for the property you are creating, and then click
Next.
Note: Available object types will vary depending on the SolarWinds Orion
products you have installed, but all installations will allow you to create
both Node and Volume custom properties.
5. If you want to create a property based on a predefined template, click
the appropriate Property Template.
347
6.
7.
8.
9.
10.
l
Note: Property templates provide generic suggestions in the Property

Name and Description fields and an appropriate custom property Format.
Edit the Property Name and Description fields, as appropriate.
Select a custom property Format, as appropriate.
If you want to restrict the possible values that other, non-administrative users can use for the selected property, check Restrict
values, and then provide values, as follows:
a. Enter an appropriate value for Value X.
b. Click Add Value.
c. If you need to delete a provided property value, click X next to the
property to delete.
d. Repeat, as needed, until you have supplied all valid property values.
Click Next.
Click Select Objects, and then, using either of the following methods, sort
the objects to which you can apply the selected property:
Select an appropriate Group by: criterion, and then click the appropriate
group including the objects to which you want the selected property to
apply.
Use the search tool to search your SolarWinds database for the objects to which
you want the selected property to apply.
11. Check all monitored objects to which you want the selected custom property to apply.
Note: Click > to expand listed objects to view available child objects.
12. Click Add to add checked objects to the Selected Objects list.
13. In the Selected Objects list, check all objects to which you want the selected property to apply.
14. If you have selected all objects to which you want the selected property to apply, click Select Objects.
15. For each selected object, select or enter an appropriate property value.
16. If you are editing a property with defined values, you are an administrator, and you want to add a new property value, select Add new
value in the dropdown menu, and then provide the New value.
17. If you want to apply the selected property to a different group of
objects, click Add more, and then select objects as indicated above.
18. If you have selected values for all objects to which you want the selected property to apply, click Submit.
348
Assigning Values to a Custom Property

The following procedure provides steps required to assign new values to an
existing custom property.
To assign custom property values:
3. Click Manage Custom Properties in the Node & Group Management
grouping.
4. Select the custom property for which you want to assign values, and then
click Assign values.
5. Click Select Objects, and then, using either of the following methods, sort
the objects to which you can apply the selected property:
l Select an appropriate Group by: criterion, and then click the appropriate
group including the objects to which you want the selected property to
apply.
Use the search tool to search your SolarWinds database for the objects to which
you want the selected property to apply.
6. Check all monitored objects to which you want the selected custom property to apply.
Note: Click > to expand listed objects to view available child objects.
7. Click Add to add checked objects to the Selected Objects list.
8. In the Selected Objects list, check all objects to which you want the selected property to apply.
9. If you have selected all objects to which you want the selected property to apply, click Select Objects.
10. For each selected object, select or enter an appropriate property value.
11. If you are editing a property with defined values, you are an administrator, and you want to add a new property value, select Add new
value in the dropdown menu, and then provide the New value.
12. If you want to apply the selected property to a different group of
objects, click Add more, and then select objects as indicated above.
13. If you have selected values for all objects to which you want the selected property to apply, click Submit.
Importing Custom Property Data

Once you have defined custom properties, it is possible to import corresponding
values from an external document, if it is correctly formatted. For example, you
may already possess a spreadsheet listing the asset tags of all your network
349

nodes, and you would like to have this information available for reporting and
publication in the web console. In this scenario, Asset Tag is added as a custom
property, and then the import wizard is used to populate the asset tag values from
the spreadsheet. The following steps outline the process for importing custom
properties data.
To import custom property data:
3. Click Manage Custom Properties in the Node & Group Management
grouping.
4. Click Import.
5. Click Browse, and then navigate to your custom property data file.
6. Select the type of object for which you are importing values.
Note: For best results, format your data as tables and provide titles in your
data file that match the existing custom properties you are populating.
7. Click Next.
8. For each detected Spreadsheet Column, select the corresponding Orion
Database Column, and then select the appropriate Relationship between
the indicated columns.
Notes:
l
At least one column must match, for corresponding entries, between your
spreadsheet and the Orion database column. Select the matches Relationship option for this key data.
The imports to Relationship option overwrites any existing data in the

corresponding Orion Database Column.
9. Click Import.

Custom properties are easily removed, as shown in the following procedure.
To remove a custom property:
3. Check each property you want to remove, and then click Delete.
4. Confirm your selection by clicking Delete when prompted.
350
Exporting a Custom Property

With the Export Custom Properties feature, you can download a spreadsheet of
any selected custom property, as it is stored in your SolarWinds database.
To export a custom property:
3. Check the property you want to export, and then click Export.
4. If you want to select values for only a subset of all monitored objects
for which the selected custom property is defined, click Select Objects,
select the objects for which you want property values, and then click
Select Objects.
5. Select the columns you would like to export.
6. Choose a file type for the exported file, and then click Export.
7. The exported file is saved with the filename exportCP in the localy designated downloaded files folder for your web console browser.
Custom Properties in Older Orion Core Versions

In older versions of Orion Core, before version 2012.2, custom properties are
managed using the Custom Property Editor application, as indicated in the
following sections:
l
l
l
l
l

Removing Properties with the Custom Property Editor
Importing Property Data with the Custom Property Editor

The following procedure provides steps required to create a custom property in
SolarWinds Orion products that use any version of Orion Core that is older than
version 2012.2.
Note: Custom properties are stored in the SolarWinds database. SQL Server
treats NULL and 0 differently, so, if you are creating a custom property to trigger an
alert, confirm that the alert trigger conditions account for this difference. For more
information, see the SolarWinds Knowledge Base article, Unexpected results
when you use advanced alerts on custom properties with NULL values.
To create a property with the Custom Property Editor:
351

3. If you want to add predefined properties, complete the following procedure:
a. Select Add Predefined Properties.
b. Check Show Advanced Properties to view additional predefined properties.
c. Check the properties you want to add, and then click OK.
4. If you want to generate a completely new custom property, complete the
following procedure:
a. Select Build a Custom Property from scratch.
b. Select the Orion database table to which you want to add the new custom property.
c. Provide the new Property Name.
Notes:
l
To ensure full custom property functionality, do not leave the Property

Name field empty.
Although most non-alphanumeric characters used in custom property names are

replaced by underscores (_) when names are stored in the Orion database,
SolarWinds recommends against using non-alphanumeric characters in custom
property names. Hash characters (#) are not allowed in any property name.
d. Select the Property Type.
e. Enter a Max. Text length.
Note: Regardless of the value provided in this field, NPM does not support custom properties defined with more than 4000 characters.
f. Click OK.

The Custom Property Editor Settings window allows you to customize the display
for nodes and volumes.
Note: Orion Network Performance Monitor users may also customize the display
for interfaces.
To configure Custom Property Editor settings:
352

3. Click Node Editing and check the system properties you want to see in the
Edit Node Properties window. Repeat for Volume Editing.
4. If you want to enable Auto-Search, click Auto-Search, and then check
Enable Auto-Search.Note: With Auto-Search enabled, the current column
is searched as you type. Select a cell and then press Enter to edit its contents. With Auto-Search disabled, typing will begin editing the cell.

The Custom Property Editor allows you to easily modify custom properties.
Note: Orion Network Performance Monitor users may also edit custom properties
for interfaces.
To edit a custom property:
2. Click Properties> Edit Object Properties, where Object is Node or
Volume, as appropriate.
3. Click the cells in the table that you want to edit, and then enter or modify
the cell contents, as necessary.
4. If you want to create or edit a filter for your custom properties, click No
Active Filter or Filter Active, and then define the filter that you want to
apply. For more information, see Using Filters in the Custom Property
Editor Edit View on page1.
5. If you are satisfied with your edits, click OK.
Using Filters in the Custom Property Editor Edit

View
Filtering is available in the Edit Custom Properties windows for all devices, and
you can apply filters to manipulate available data views. Custom Property Editor
allows you to edit the text within custom property fields to which a filter is applied.
The following procedures show how to use filters within Custom Property Editor.
Creating Custom Properties Filters

The following procedure creates a custom properties filter.
Note: Orion Network Performance Monitor users may also create filters for
interface custom properties.
To create a filter:
353

3. Click Filter Active or No Active Filter, and then click Apply Filter.
Note: The text of the Filter Active / No Active Filter button changes
dynamically, indicating the filter status for the currently viewed data.
4. Click the hyperlinked text to select the appropriate criteria.
5. Click the ellipsis, and then select from the following options:
Note: The lists of available linked descriptors are dynamically generated
in consideration of all other variables within the same condition. For more
information, see Click Start> SolarWinds Orion> Alerting, Reporting, and
Mapping> Advanced Alert Manager. on page1.Click Browse () to
select a condition type.
l Select Add a new elementary condition to generate a condition that is
based on a direct comparison of network object data fields.
l Select Add a new advanced elementary condition to generate a condition based on a comparison of device data fields and values.
l Select Add a new complex condition to define a condition that filters
other defined conditions.
l Select Delete current condition to remove a selected condition.
Select Move current condition forward or Move current condition backward
to change the order of your conditions accordingly.
6. Continue to click hyperlinked text and use the cascading menus to select
filtering criteria.
7. If you have completed the configuration of your filter, click OK.
Note: The Edit Object Properties view changes, based upon the selected
filter, and the text of the Filter Active / No Active Filter now displays Filter
Active, indicating that the filter is being applied to the currently viewed
properties.

The following procedure removes a custom properties filter.
Note: Orion Network Performance Monitor users may also remove filters for
interface custom properties.
To remove a filter:
354

3. Click Filter Active, and then click Remove Filter.
Note: The Edit Object Properties view now displays all custom properties.
355
Chapter 23: Creating Account

LimitationsCore
The Account Limitation Builder application allows you to create and customize
account limitations for the Orion Web Console. These limitations ensure that
users of the web console can only view the network objects that are pertinent to
their job duties. The following are but a few examples of the uses of account
limitation in the Orion Web Console:
l
l
l
l
Limit customer views to specific network nodes

Limit views by department or functional area
Limit views by device type or device role
Limit views based on the geographic location of devices
NPM provides predefined account limitations that use built-in NPM property to
limit user access. For greater flexibility, however, you can use the Account
Limitation Builder to create your own account limitations based on predefined or
custom properties. For more information about enabling account limitations in the
Orion Web Console, see Setting Account Limitations on page1. For more
information about custom properties, see Creating a Custom Property on
page1.
Using the Account Limitation Builder

Before you can use the Account Limitation Builder, you must have first created the
custom property that you want to use to limit the Orion Network Performance
Monitor Web Console view. For more information about custom properties, see
Creating Custom PropertiesCore on page1. After you have defined custom
properties and populated them with data, you may use the Account Limitations
Builder as directed in the following procedure.
Creating an Account Limitation

The following steps create an account limitation.
To create an account limitation:
356
Chapter 23: Creating Account LimitationsCore

Control> Account Limitation Builder.
2. Click Start on the splash screen.
3. Click Edit> Add Limitation.
4. Select a Custom Property.
Notes:
l
If Custom Property is empty, you need to define a custom property. For

more information about custom properties, see Creating Custom
PropertiesCore on page1.
The remaining boxes are populated automatically, based upon your selection.
5. Choose a Selection Method.
Note: This is the selection format that will appear when you are choosing
values for the account limitation through the web Account Manager. For
more information, see Setting Account Limitations on page1.
6. If you want to include your own description of your account limitation, type
your description over the default text provided in the Description field.
7. Click OK.
Your newly defined account limitation is added to the top of the table view. You
may now use the new limitation in the Orion Web Console Account Manager. For
more information, see Setting Account Limitations on page1.

The following steps delete an account limitation using the Account Limitation
Builder utility.
Note: Although Orion deletes the selected limitations from the table, ensuring that
they will no longer be available through the web Account Manager, if you delete a
limitation using the Account Limitation Builder, all accounts that have been
assigned that limitation will remain limited. Deleting a limitation simply makes it
unavailable for future use in the Orion Web Console.
To delete an account limitation:
Control> Account Limitation Builder.
2. Click Start on the splash screen.
3. Click the row of the limitation that you want to delete.
Note: Use Shift+click to highlight multiple consecutive rows or Ctrl+Click to
highlight multiple non-consecutive rows.
4. Click Edit> Delete Selected Limitations.
357
358
Chapter 24: Managing the Orion

DatabaseCore
All Orion network monitoring and management products use a Microsoft SQL
Server database to store web console settings and collected network
performance and configuration data. The following database utilities are
packaged with NPM products to help you manage your Orion database.
Database Manager
Allows you to perform queries and edit database values. For more
information, see Using Database Manager on page1.
Allows you to summarize, clean, and compact your Orion database. For
more information, see Database Maintenance on page1.
The database Orion uses is hosted on a Microsoft SQL Server. When installing
SQL Server, you have the option of installing the SQL Server Management
Studio. If you are the database administrator for the SQL Server hosting your
Orion database, SolarWinds generally recommends that you install this utility as it
provides a number of features that are not currently available in the Orion
Database Manager. For more information, see Using SQL Server Management
Studio on page1.
Note: Orion Network Configuration Manager maintains its own additional
database for device configurations and user activity logging.
Using Database Manager

The Database Manager can be used to perform queries, view database and table
details, export data, and edit database values. You may also repair, compact,
restore, or backup the database from the Database Manager application. The
following procedures present some of the basic database management
operations that are available with Database Manager.
Note: Only limited Database Manager functionality is available on SolarWinds
installations using Orion Core Services version 2012.2 and higher. For
installations using Orion Core Services version 2012.2 and higher, use SQL
359

Server Management Studio to manage your SolarWinds database. For more
information, see "Using SQL Server Management Studio" on page1.
Adding a Server
If you have not already designated a database for use with Orion as a backup or
supplement, use the following steps to add a SQL server to the Database
Manager. Once added, your selected server and associated databases display in
the tree structure in the left pane of Database Manager.
To add a SQL server to Database Manager:
Database Manager.
2. Click Add default server.
3. If either a default SQL server is not found or you do not wish to use
the default SQL server, complete the following steps:
a. Click Add Server.
b. Using the format Server/Instance, select or provide the SQL Server
instance you are using as your Orion database.
c. Select the appropriate login method, providing credentials as required,
and then click Connect.
Viewing Database Details

The Database Details window in Database Manager presents two tabs displaying
property and tables information about a selected database. The following
procedure is a guide to the information available in the Database Details window.
To view database details:
Database Manager.
2. If the SQL Server hosting your Orion database is not listed in the left
pane, you must add the SQL Server hosting your Orion database. For
more information, see Adding a Server on page1.
3. Click + in the left pane to expand the SQL Server hosting your Orion database, and then right-click your Orion database.
Note: SolarWindsOrion is the default name of the Orion database.
4. Click Database details.
Notes:
l The Properties tab provides general statistics and descriptions of the selected database.
360

The Tables tab shows a list of the tables in the selected database and their
respective sizes.
5. If the Last Backup field on the Properties tab is blank, you have not
generated a backup of the selected database. For more information about
scheduling a recommended regular database backup, see Using SQL
Server Management Studio on page1.

The Database Manager Table Details window provides property, column, and
index information about the selected table. You can also query the selected table
directly from the Table Details window, as shown in the following procedure.
To view table details:
Database Manager.
3. Click + in the left pane to expand the SQL Server hosting your Orion database, and then click + to expand your Orion database.
Note: SolarWinds Orion is the default name of the Orion database.
4. Right-click a table to view, and then click Table details.Note: The Properties tab includes general statistics relating to the table size and creation
date; the Columns tab describes the columns in the table, table keys, and
field types; and the Indexes tab lists indexes used within the table.
5. If you want to query the open table, right-click the table name, and then
click Query table.
Warning: Special care should be taken while editing database values as
you can easily compromise the integrity of your database. For more information, see Editing Database Fields on page1.
Note: A default SQL statement is provided.
Editing Database Fields

Database fields may be edited within the Database Manager application from the
query view, as indicated in the following procedure.
Warning: Be very careful when you are editing database values, as you can
easily jeopardize the integrity of your database.
To edit database fields with Database Manager:
361

Database Manager.
3. Click + in the left pane to expand the SQL Server hosting your Orion database, and then click + to expand your Orion database.
Note: SolarWinds Orion is the default name of the Orion database.
4. Right-click a table to view, and then click Table details.
5. Use the provided SQL statement or enter your own in the query field.
6. If you want to view the query results in table view, click Execute query.
7. If you want to edit table fields, click Enable table editing, and then edit
fields as necessary.

If you have a licensed, Standard or Enterprise Edition copy of SQL Server 2005 or
2008 with SQL Server Management Studio installed, you can use it to maintain
your NPM database. The following procedure is a basic guide to configuring a
daily Orion database maintenance plan in SQL Server Management Studio.
Notes:
l
l
Your specific environment may require additional configuration.

You may need to contact your database administrator to gain access to
SQL Server Management Studio for your Orion database.
The following procedure clears historical maintenance records and creates
a backup of your Orion database. In general, however, SolarWinds recommends that you contact your database administrator and reference the
Microsoft documentation provided with SQL Server for instructions on
using SQL Server Management Studio to manage your Orion database.
To use SQL Server Management Studio to manage your Orion database:

1. Click Start> Microsoft SQL Server> SQL Server Management Studio.
2. Click View> Object Explorer.
3. Expand the SQL Server instance containing your Orion database in the
Object Explorer pane on the left.
Note: Expand the Databases folder for any instance to confirm included
databases. By default, the Orion database is named SolarWinds Orion.
4. Expand the Management folder, right-click the Maintenance Plans folder,
and then click Maintenance Plan Wizard.
5. Click Next to start the SQL Server Maintenance Plan Wizard.
362

6. Provide an appropriate Name and Description for your maintenance plan.
7. Click Browse () next to the Server field.
8. Check your SQL Server\Instance, and then click OK.
Note: If your SQL Server\Instance is not in the list, provide it manually.
9. Select the authentication type that is used to connect to the SQL server,
and, if required, provide appropriate User name and Password credentials.
Note: Use the same authentication type and credentials you provided in
the Orion Configuration Wizard to access your Orion database.
10. Check Clean Up History and Back Up Database (Full)Note: When a
task is clicked, the Maintenance Plan Wizard provides a brief task description.
11. Click Next.
12. Set the order of task execution, top to bottom, by selecting tasks and clicking Move Up and Move Down as needed.
Note: The following steps assume the Clean Up History task precedes the
Back Up Database (Full) task.
13. Click Next when the task execution order is set.
14. On the Define Cleanup History Task view, check the types of historical
data to delete, and then set the threshold age for historical data removal.
15. Click Next.
16. On the Database Back Up (Full) view, complete the following steps:
a. Click the Databases field.
b. Select These databases.
c. Check your Orion database.
17. Click OK.
18. Select Database in the Backup component area.
19. In the Destination area, complete the following steps:
a. Select Disk.
b. Select Create a backup file for every database.
c. Click Browse () to select an appropriate database backup file destination with sufficient free space.
20. Click Next.
21. On the Select Plan Properties view, click Change.
22. Configure the database maintenance job schedule as follows:
a. Provide an appropriate Name for the new job schedule.
b. Select Recurring as the Schedule type.
c. Check Enabled, and then select Daily in the Occurs field.
d. Provide an off-peak network usage time in the Occurs once at field.
e. Select a Start date, and then select No end date.
363

23. Click OK.
24. Click Next, and then check Write a report to a text file.
25. Click Browse () to select an appropriate maintenance report file destination.
26. Review wizard results, click Finish, and then, when the wizard successfully finishes, click Close.
For additional help with using SQL server Management Studio, visit the Microsoft
Support Website at http://support.microsoft.com.
Database maintenance performs a series of data summarizations that help you
optimize the size of your Orion database. Data summarization consists of
gathering all the collected network data for a defined period of time, calculating
statistics from the data, and then discarding the data itself while retaining the
statistics. By regularly running database maintenance, you can realize significant
space savings and performance improvements.
Database maintenance can either be run directly from the Start menu, or
scheduled for a set Archive Time and initiated from the Orion Polling Settings
view in the Orion Web Console. In either case, once started, database
maintenance normally proceeds without further attention. For more information
about setting the Archive Time for database maintenance on the Orion Polling
Settings view, see Orion Polling Settings on page1.
The following procedure provides the steps to perform Database Maintenance:
Note: Administrative privileges are required to run Database Maintenance.
To run the Database Maintenance utility, click Start> All Programs>
SolarWinds Orion> Advanced Features> Database Maintenance, and then
click Start.
364

The following chapter provides a number of common network performance
monitoring scenarios for which NPM provides solutions.
Creating an Alert to Discover Network Device Failures

With advanced alerting, NPM gives you the ability to immediately discover
whenever any device on your network is experiencing a problem. The following
procedure creates an advanced alert that uses a custom location property to alert
you to a node failure on your monitored network.

Orion NPM provides the Custom Property Editor that allows you to choose from a
provided collection of many commonly used properties, or you can easily and
efficiently build your own custom properties. Once your custom property is
defined, the Import Wizard allows you to populate your new property from either a
text- or comma-delimited file. For more information, see Importing Custom
Property Data on page1.
Alternatively, if you only have a few individual changes or additions, you may
choose to make those changes using the Edit view. For more information, see
Editing Custom Properties in the Custom Property Editor on page1.
The following procedure uses the Custom Property Editor to create a custom
location property that is applied to monitored nodes.
To create and apply a custom location property:
365
3. Select Nodes, and then click Next.
4. Enter NodeLocation as the Property Name, provide an appropriate Description, and then click Next.
5. Click Select Nodes.
366
6. Select all the nodes to which you can assign the same value for NodeLocation, and then click Add.
7. When all nodes that may be given the same value for NodeLocation are
selected, click Select nodes.
8. Enter the value that all selected nodes share as NodeLocation, and then
click Submit.
367
The NodeLocation custom property has now been defined for all selected nodes.
Creating an Alert Using a Custom Property

The following example creates multiple alerts using the State custom property
defined previously. Each alert will trigger when a node goes down. Upon
triggering, each alert will perform a specific action that depends on the value of
the State custom property for the node triggering the alert.
To create a new advanced alert:
3. Check Alert me when a node goes down, and then click Edit.
4. Click the Trigger Actions tab, and then click Add New Action.
368
The following section provides instructions for adding a number of alert actions to
a selected alert.

The following sections create three different actions for the same alert:
l
l
l

See "Send a Syslog Message" on page 371
Send an SNMP Trap
The following sections assume that you have already created a State custom
property and that you are adding an action to an existing alert. For more
information about custom properties, see Creating Custom PropertiesCore on
page1. For more information about creating alerts, see Naming, Describing, and
Enabling an Advanced Alert on page1.
The following procedure configures a local alert log on the computer hosting your
Orion NPM evaluation.
To create a local alert log:
1. Open an alert you want to enable on your network for editing.
Note: For more information about opening an alert for editing, see Naming, Describing, and Enabling an Advanced Alert on page1.
2. Click the Trigger Actions tab, and then click Add New Action.
369
3. Select Log the Alert to a file, and then click OK.
4. Click Browse () to open the default Orion directory.
5. Browse to an appropriate folder, and then type ExampleAlertLog as the alert

log file name.
6. Click Save.
7. In the Message text box, type Node ${NodeName} in ${State} network is currently down.
370
8. Click OK.
The next section configures an additonal action that sends a Syslog message to a
designated server when this alert triggers.
The following procedure configures an alert Syslog message.
To configure an alert Syslog message action:
1.
2.
3.
4.
Open an alert for editing and then click Add New Action.
Select Send a Syslog Message, and then click OK.
Click the Syslog Message tab.
Type 127.0.0.1 as the Hostname or IP Address of the Syslog Server, and
then type Node ${NodeName} in ${State} network is currently down in the Syslog
Message field.
Note: The ${variable} syntax is required for Orion NPM variables. For more
information, see NPM Variables and Examples on page1.
5. Click OK.
Send an SNMP Trap
The following procedure configures an SNMP trap alert action.
To configure an SNMP trap action:
1. Open an alert for editing.
2. Click Add New Action.
3. Select Send an SNMP Trap, and then click OK.
371
4. Click the SNMP Trap tab.

5. Type 127.0.0.1 as the SNMP Trap Destination, and then type Node
${NodeName} in ${State} network is currently down in the Alert Message field.
Note: The ${variable} syntax is required for Orion NPM variables. For more
information about available variables, see NPM Variables and Examples
on page1.
6. Click OK.
7. If you are finished configuring alert actions, click OK.
Testing Alerts
You do not have to actually experience a device failure to confirm that your alerts
are working. Orion NPM provides a Test Alerts function that allows you to ensure
that you have configured your alerts properly, as shown in the following
procedure.
To test a configured alert:
3. Check the alert you want to test, and then click Test.
Note: For purposes of this example, check Alert me when a node goes
down as it is the same alert that was configured previously.
372
Testing Alerts
4. Select Alert on Network Node, and then select your Orion server.
5. In the Test Alert Definition area, click Test Alert Trigger.
6. Review the alert test log as the test completes.

After the alert test completes, you can view the results of each of your alert actions
as follows:
373
To view the results of your email alert action, open EvaluationAlertLog in

your Orion folder, typically <Volume:>\Program Files\Solarwinds\Orion.
To view results of your Syslog message action, click Start> All
Programs> SolarWinds Orion> Syslog and SNMP Traps> Syslog
Viewer.
To view the results of your Syslog message action, click Start> All
Programs> SolarWinds Orion> Syslog and SNMP Traps> Trap
Viewer.
Scheduling and Emailing Business Hours Reports

Orion Report Writer is a component available to all Orion products. Using Orion
Report Writer with Orion Report Scheduler, you can create reports that you can
then distribute as regularly scheduled emails. The following sections create and
schedule for email delivery an example report of interface traffic during peak
business hours.
Creating a Business Hours Report

The following procedure creates a monthly report of interface traffic during peak
business hours, defined as between 7:00 AM and 7:00 PM.
To create a business hours interface traffic report:
2. In the left pane, click Historical Traffic Reports> Average and Peak Traffic
RatesLast Month.
3. On the General tab, edit the Report Group, Report Title, and Description
as appropriate.
4. On the Filter Results tab, click Browse (...).
5. Select Add a new elementary condition.
6. In the new field, click the first asterisk (*), and then select Date/Time (Traffic
Filtering Only)> Time of Day (24 hour format).
7. Click is equal to, and then select greater or equal.
8. Click the second asterisk (*), and then enter the start time of your peak business hours in 24-hour hh:mm format (e.g. 07:00).
9. Click Browse (...), and then select Add a new elementary condition.
10. Click the first asterisk (*), and then select Date/Time (Response Time Filtering Only)> Time of Day (24 hour format).
11. Click is equal to, and then select less.
374

12. Click the second asterisk (*), and then enter the end time of your peak business hours in 24-hour hh:mm format (e.g. 19:00).
14. Click the first asterisk (*), and then select Date/Time (Traffic Filtering Only)
> Day of Week.
15. Click is equal to, and then select not equal.
16. Click the second asterisk (*), and then select Saturday.
18. Click the first asterisk (*), and then select Date/Time (Response Time Filtering Only)> Day of Week.
19. Click is equal to, and then select not equal.
20. Click the second asterisk (*), and then select Sunday.
21. Click Preview on the right of the Report Designer pane.
22. Click File> Save.
The report is now saved to the Reports folder on your Orion server. It will list as a
member of the Report Group provided on the General tab in Report Designer.

The following procedure schedules a selected report for distribution using email.
To schedule an emailed report:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

Click Reports.
Click + as required to locate the report you want to schedule for email.
Click the name of the report you want to schedule for email.
Copy the URL of the report you want to schedule for email.
Click Start> All Programs> SolarWinds Orion> Alerting, Reporting, and
Mapping> Orion Report Scheduler.
Click Edit> Add New Job.
Provide an appropriate job name for this scheduled report email, and then
click Continue.
Paste the URL of the report you want to schedule for email into the link
field.
If you need to provide Windows login credentials to view the report
you are scheduling, click the NT Account login tab, and then provide the
user account details needed to log in.
If you want to create a printable report that excludes the Orion Web
Console banner and menu bar, on the Orion Web Login tab, check
Retrieve a Printable Version of this Page.
375

12. If the report you are scheduling requires an Orion user account, on
the Orion Web Login tab, check Send Orion Username / Password in
URL, and then provide the required user credentials to view the Orion
report.
13. Click Continue.
14. Configure the scheduling for your report job, and then click Continue.
15. Confirm that either Email the Web Page (as HTML) or Email the Web
Page (as PDF) are selected, and then click Continue.
16. Provide required email addresses and a subject in the appropriate fields
on the Email To tab.
17. Provide a name and reply address on the Email From tab.
18. On the SMTP Server tab, type the hostname or IP address and confirm the
port number of the server used to send email from the Orion server.
19. Click Continue.
20. Enter the user name and password for the local Windows account that will
email the report, and then click Continue.
21. Add any additional comments or notes about this job, and then click Finish.
Creating Geographic or Departmental Views

Using groups, it is a straightforward process to create custom web console views
displaying informaton about monitored objects distinguished by geographic or
departmental location. The following procedures create custom views that are
then populated with appropriate group-based resources.

The following procedure creates a custom group of monitored objects in a defined
geographic location.
To create a custom group:
Manage Groups in the Node & Group Management grouping of the Orion
4. Click Add New Group, and then provide an appropriate Name and
Description for the custom group. For example, a group named Austin
could be described as, All monitored network objects in the Austin office.
5. Click Next.
376

6. In the Available Objects pane, check all monitored objects fitting the group
definition. For example, using the example above, select all objects located in the Austin office.
7. Click Add to Group.
8. Select all monitored objects in the new group pane on the right, and then
click Create Group.
The new group of monitored objects located in the same geographic location is
now listed on the Manage Groups view.
377

During installation, you may be prompted with the Install Software License Key
window requesting that you sup ply your name, e-mail address, phone number,
customer ID, and password. If this is the case, follow the instructions below to
enable a software license key.
To enable a software license key:
1. If the computer on which you are installing Orion Network Performance Monitor is connected to the Internet, enter the requested
information on the Install Software License Key window, and then click
Continue.
Note: The SolarWinds license registration server will immediately issue a
license key that will allow Orion Network Performance Monitor to operate.
2. If the computer on which you are installing Orion Network Performance Monitor is not connected to the Internet, your server cannot
authenticate to the SolarWinds license registration server, so you must
complete the following procedure:
a. Click Skip This and Enter Software License Key Now on the Install
Software License Key window.
b. Using another computer that is connected to the Internet, log in to the
customer area of the SolarWinds website at www.solarwinds.com/keys.
c. Click Software Keys from the Customer Area menu.
d. Click the product for which you need a key.
e. Provide the requested information, including the Computer Name and
Program Serial Number.
f. Click Generate Key.
g. Copy the generated key.
h. Enter the key in the Enter Software License Key text box.
3. Click Continue to complete your Software License Key installation.
378
379
Chapter 27: Configuring Automatic

Login
The NPM Web Console allows you to log in using any of the following methods:
l
Windows Active Directory Authentication, available in all Orion products

released after Orion NPM version 10.1.
Windows Pass-through Security. If you choose to employ Windows Passthrough Security, NPM users can be authenticated through Windows
Security, with no need to log in using a separate NPM Account or User
Name and Password. For more information, see Using Windows
Pass-through Security on page1.
DirectLink. If a DirectLink account is activated, any URL referring directly to
an Orion Web Console page will bypass the Orion Web Console login
page by logging the user into the DirectLink account. For more information,
see Using the DirectLink Account on page1.
URL Pass-through. For more information, see Passing Login Information
Using URL Parameters on page1.
NPM prioritizes user login in the following manner:

1. Windows Active Directory Authentication is enabled. To enable Windows
Active Directory Authentication, check the Windows Authentication option
when configuring the Orion Web Console in the Configuration Wizard.
2. The Account or User ID and Password passed on the URL.
3. The Account or User ID and Password entered on the login.aspx page.
4. The Windows User if IIS NT Security is enabled, logging the user in using
NT Security.
5. The Windows Domain to which the User belongs, for example, Development\Everyone.
6. The presence of a DirectLink Account.
Using Windows Pass-through Security

On all Orion products released before Orion NPM version 10.1, you may take
advantage of the Windows Pass-through Security functionality when IIS NT
Security is enabled. NPM users can be authenticated through Windows Security,
380

with no need to log in using a separate NPM account or User Id and Password.
Pass-through Security can be configured to employ either Domain or Local
computer security. Both may also be used at the same time. The Orion Network
Performance Monitor Account or User ID and Passwords must then be set up to
match the Account or User ID and Passwords that are used for the Domain and/or
Local computer security. Use the following procedure to enable IIS NT Security
for logging in to the Orion Web Console with Windows Pass-through Security.
Notes:
l With the release of Orion NPM 10.1, Orion Web Console users may be
authenticated using Active Directory.
l When authenticating users with Windows Security, ensure your Orion
server uses the NetBIOS domain name, instead of the fully qualified
domain name.
To enable IIS NT security for Windows Pass-through Security:
1. If you are using NT Domain Authentication Format for pass-through
accounts, create these pass-through accounts in the Orion Web Console
Account Manager using Domain\UserID as the User Name, as follows:
Washington\Edward
StLouis\Bill
Note: For more information about creating accounts using the Orion Web
Console Account Manager, see Creating New Accounts on page1.
2. If you are using Local Computer Authentication Format for
passthrough accounts, create these accounts in the Orion Web Console
Account Manager using Computer\UserID as the User Name, as follows:
SolarWindsS2\Edward
Server3\JonesR
l
Note: For more information about creating accounts using the Orion Web
Console Account Manager, see Creating New Accounts on page1.
3. Click Start> Control Panel> Administrative Tools> Internet Information Services (IIS) Manager.
4. If you are using Windows Server 2003, complete the following steps:
a. Expand Internet Information Services> Local Computer> Web Sites
in the left pane.
b. Select SolarWinds NetPerfMon.
c. Click Action> Properties.
d. Click the Directory Security tab.
e. Click Edit within the Authentication and access control area.
f. Clear Enable anonymous access.
381

g. Check Integrated Windows authentication in the Authenticated
access group.
h. Click OK to close the Authentication Methods window.
i. Click Apply, if available, and then click OK to close the SolarWinds
NetPerfMon Properties window.
j. Collapse Internet Information Services> Local Computer> Web
Sites.
k. Collapse Internet Information Services> Local Computer in the left
pane.
l. Click Action> All Tasks> Restart IIS.
m. Confirm that Restart Internet Services on Local Computer is selected,
and then click OK.
n. Close the IIS Manager.
5. If you are using Windows Server 2008, complete the following steps:
a. Click Start> Administrative Tools> Server Manager.
b. Expand Roles.
c. Click Web Server (IIS).
d. In the Role Services area, confirm that Web Server> Security> Windows Authentication is installed.
e. If Windows Authentication is not installed, click Add Role Services,
check Web Server> Security> Windows Authentication, click Next,
and then complete the service installation.
f. Click Start> Administrative Tools> Internet Information Services
(IIS) Manager.
g. Select your Orion server in the left pane.
h. Click Authentication in the IIS group of the main pane.
i. Right-click Anonymous Authentication, and then click Disable.
j. Right-click Windows Authentication, and then click Enable.
k. Click your Orion server, and then click Restart in the Actions pane.
6. Close the IIS Manager.
7. Log in to the Orion Web Console using the Windows account credentials
you have already established.

The user ID and password can be passed as parameters within the URL. This
allows you to create a favorite or bookmark within a browser, or on your desktop.
Create a favorite with a link in the following form to pass the login information:
http://DOMAIN/Orion/Login.aspx?AccountID=USER&Password=PASSWORD
382

Provide the hostname or IP address of your Orion server as the DOMAIN. Provide
your Orion User ID as the USER, and then provide your Orion user account
password as the PASSWORD.
Warning: HTTP requests are not encrypted, so User IDs and Passwords sent in
HTTP requests are not secure. For more information about enabling HTTPS on
your Orion server, consult www.microsoft.com.
Using the DirectLink Account

Enabling a DirectLink account allows you to make direct hyperlinks to specific
web console views available to individuals who do not already have Orion Web
Console user accounts. Any URL referring directly to an NPM web page
bypasses the login screen, logging the user into the DirectLink account. The
DirectLink account is created like any other account, and it can include custom
views and account limitations. For more information web console accounts, see
Creating New Accounts on page1.
To enable a DirectLink account for the Orion Web Console:
Accounts in the Accounts grouping.
3. Click Add.
4. Type DirectLink as the new User Name.
5. Type a Password, confirm it, and then click Submit.
6. Edit DirectLink account options, as necessary, for your installation of Orion
Network Performance Monitor. For more information about editing account
options, see Editing User Accounts on page1.
7. Create a custom view to be used as the home page of the DirectLink
account. For more information, see Creating New Views on page1.
8. Specify the new DirectLink view as a default view in Account Manger. For
more information, see Editing User Accounts on page1.
9. If you would like to limit the DirectLink account to specific devices or
device types, see Setting Account Limitations on page1.
383

NPM and Orion modules use a number of different icons as status indicators. In
the case of alerts and events, further information is provided with the icon within
the resource.
Status Indicators
The following table lists Orion NPM icons with associated status indications,
status types, and numerical status identifiers, proceeding from the worst.
Note: Status levels of type Ignore are not displayed in any status rollup mode.
Icon Status Indication
Node or Interface is Down (Polling request timed-out)
Shutdown
Lower Layer Down
Unreachable
Type
Error
Error
Error
Error
ID
2
4
8
12
Node is in a Warning state (dropped packets or down interface) Warning 3

Critical
Warning 14
Mixed Availability
Warning 15
Misconfigured
Warning 16
Could Not Poll
Warning 17
Unconfirmed
Warning 19
Polling Engine Shutdown, Monitoring Stopped, System Error, or
Warning -Fail Over
System Warning; Node, Interface, or Volume Changed;
Warning -Interface Reappeared; Network Baseline Started/Finished
Node or Interface is Up
OK
1
Dormant
OK
6
Active
OK
22
384

Inactive
Expired
Unknown
Node or Interface is Unmanaged
Interface is Unplugged but not Down
Node is defined as External
OK
OK
Ignore
Ignore
Ignore
24
25
0
9
10
(Not monitored by Orion NPM, but an application or component

on the node may be monitored by SAM.)
Monitoring Disabled
Disabled
Not Licensed
Informational; Volume Reappeared
Monitoring Started, NPM Service Started, or Fail Back
Node, Interface, or Volume Removed
Ignore
11
Ignore
Ignore
Ignore
N/A
N/A
26
27
28
---
N/A
--
N/A
N/A
N/A
N/A
N/A
N/A
N/A
--------
Interface Shutdown
Node Added
Interface or Volume Added (Web Console)
Node Rebooted
Interface Enabled
Interface Remapped
Volume Remapped
Interface or Volume Disappeared
Status Rollup Mode

In the Orion Web Console, the Status Rollup Mode designates how the
availability status of a group of nodes is displayed. Three options are available for
the case when there are objects at different status levels in a selected group:
l
Show Best Status is most useful for displaying groups that are
defined as collections of redundant or backup devices. The following
table indicates how the Show Best Status option operates:
Note: Compare Group Status results under the Show Best Status option
with results for the same groups of objects under the Show Worst Status
option.
385
Status Rollup Mode

Object States
Group Status
(Up, Warning, Down)
(Up)
(Warning, Down)
(Up)
(Warning, Down, Unknown) (Warning)
l
Show Worst Status ensures that the worst status in a group of objects is
displayed for the whole group. The following table indicates how the Show
Worst Status option operates:
Object States
Group Status
(Up, Warning, Down)
(Down)
(Warning, Down)
(Warning)
(Warning, Down, Unknown) (Down)
Mixed Status shows Warning ensures that the status of a group displays
the worst warning-type state in the group. If there are no warning-type
states, but the group contains a mix of up and down states, then a Mixed
Availability ( ) warning status is displayed for the whole group. The following table indicates how the Mixed Status shows Warning option operates:
Object States Group Status

(Critical)
(Critical)
(Mixed Availability)
386
387
Chapter 29: NPM Variables and

Examples
NPM, like other Orion products, employs Orion components, including the
Advanced Alert Manager, both the Traps Viewer and the Syslog Viewer, and
Network Atlas that can all use Orion variables. These variables are dynamic and,
in the case of alerts, parse when the alert is triggered or reset. For example, the
variable ${ResponseTime} will parse with the current response time of the node that
is triggering the alert.
Note: In some cases, the database table name may be required for alert
variables, as in ${Nodes.CPULoad}. If a variable does not respond as intended,
include the relevant table name for the desired variable.
Variable Modifiers
The variables in the following sections can be modified by appending any of the
variable modifiers in the following table.
Variable
Modifier
Description
Displays the raw value for the statistic. For example, if Transmit
-Raw
Bandwidth is set to 10 Mbps, then the raw value would
be10000000. The cooked value would be 10 Mbps.
Displays the previous value for the statistic before the Alert was
-Previous
triggered
Displays the cooked value for the statistic. For example, if
-Cooked
Transmit Bandwidth is set to 10 Mbps, then the raw value
would be 10000000 and cooked value would be 10 Mbps.
Displays the previous cooked value for the statistic before the
PreviousCooked Alert was triggered
388
Advanced Alert Engine Variables

The following variables can be used in alert messages within NPM and Orion
Modules. You must begin each variable with a dollar sign and enclose each
variable identifier in braces as, for example, ${ObjectName}.
General
The following are valid, general advanced alert variables.
General Variable
Description
${Acknowledged}
Acknowledged status
${AcknowledgedBy} Who the alert was acknowledged by
${AcknowledgedTime} Time the alert was acknowledged
${AlertTriggerCount} Count of triggers
Date and time of the last event for this Alert. (Windows
${AlertTriggerTime}
control panel defined Short Date and Short Time)
${Application}
${CR}
Line Feed Carriage Return
${Copyright}
${ObjectName}
Description/Name of the object in the alert
${Release}
Release information
${Version}
Version of the SolarWinds software package
Date/Time
The following are valid date and time variables.
Date/Time Variable
${AMPM}
${AbreviatedDOW}
${D}
${DD}
${Date}
${DateTime}
${DayOfWeek}
${DayOfYear}
${H}
Description
AM/PM indicator
Current day of the week. Three character abbreviation.
Long Date and Long Time format)
Current hour
389
Group Variables
${HH}
${Last2Hours}
Last two hours
${Last24Hours}
Last 24 hours
${Last7Days}
Last seven days (Short Date format)
${LastHour}
Last hour
${LocalDOW}
${LongDate}
${M}
${MM}
${MMM}
${MMMM}
${MediumDate}
${Minute}
${S}
Current second.
${Second}
${Time}
${Today}
Today (Short Date format)
${Year}
Four digit year
${Year2}
Two digit year
${Yesterday}
Yesterday (Short Date format)
Group Variables
The following are valid group variables.
Group Variable
Description
URL of the Group Details view for a
${GroupDetailsURL}
selected group
Interval on which group membership is
${GroupFrequency}
evaluated and group snapshots are taken.
${GroupID}
Designated identifier for a defined group
Display name of group member type:
${GroupMemberDisplayName}
Node, Volume, Component, Application,
etc.
${GroupMemberDisplayNamePlural} Display name of multiple group members
390

of a type: Nodes, Components,
Applications, etc.
Full name of a group member, including
${GroupMemberFullName}
location
${GroupMemberName}
Name of a group member
Percent availability of a group member
${GroupMemberPercentAvailability} when group member status is Up, Warning,
or Critical and 0% if status is anything else.
Unique identifier of group member
${GroupMemberSnapshotID}
snapshot.
Identifier assigned to a group member
${GroupMemberStatusID}
indicating its status. For more information
see Status Variables on page1.
Name of group member status. For more
${GroupMemberStatusName}
information see Status Variables on
page1.
Uri used by SolarWinds Information
${GroupMemberUri}
Service (SWIS) to refer to the selected
group member within the web console.
${GroupName}
Name of the group.
${GroupOwner}
Orion product appropriate to the group type
100% when group status is Up, Warning,
${GroupPercentAvailability}
Critical and 0% if status is anything else.
Name of roll-up logic calculator that
evaluates status of group based on
${GroupStatusCalculatorID}
member statuses. (0 = Mixed, 1 = Worst, 2 =
Best)
Name of roll-up logic calculator that
${GroupStatusCalculatorName}
evaluates status of group based on
member statuses. (Mixed, Worst, Best)
Identifier assigned to a group indicating its
${GroupStatusID}
status. For more information see Status
Variables on page1.
Name of group status. For more information
${GroupStatusName}
see Status Variables on page1.
${GroupStatusRootCause}
A list of all group members that are not Up
391
SQL Query
${NodeID}
NULL every time - just for legacy support.
SQL Query
Any value you can collect from the database can be generated, formatted, or
calculated using a SQL query as a variable. To use a SQL query as a variable in
NPM, use ${SQL:{query}} as shown in the following example that returns the results
of the SQL query Select Count(*) From Nodes:
${SQL:Select Count(*) From Nodes}
Status Variables
When using the ${Status} variable with a monitored object, status values are
returned, as appropriate. The following table provides a description for each
status value.
Status Value Description
0
Unknown
1
Up
2
Down
3
Warning
4
Shutdown
5
Testing
6
Dormant
7
Not Present
8
Lower Layer Down
9
Unmanaged
10
Unplugged
11
External
12
Unreachable
14
Critical
15
Mixed Availability
16
Misconfigured
17
Could Not Poll
19
Unconfirmed
22
Active
24
Inactive
392

25
26
27
28
Expired
Monitoring Disabled
Disabled
Not Licensed
Node Variables
The following are valid node variables.
Node Variable
${AgentPort}
Description
Node SNMP port number
Node allows 64-bit counters (1), or
not (0)
Average node response time , in
msec, to ICMP requests
Day, date, and time until which node
polling is blocked
Device-dependent count of big buffer
misses on node in current hour,
queried with MIB 1.3.6.1.4.9.2.1.30
Device-dependent count of big buffer
misses on node in current day,
Device-dependent count of huge
buffer misses on node in current hour,
Device-dependent count of huge
buffer misses on node in current day,
Device-dependent count of large
Device-dependent count of large
Device-dependent count of medium
${Allow64BitCounters}
${AvgResponseTime}
${BlockUntil}
${BufferBgMissThisHour}
${BufferBgMissToday}
${BufferHgMissThisHour}
${BufferHgMissToday}
${BufferLgMissThisHour}
${BufferLgMissToday}
${BufferMdMissThisHour}
393
Node Variables
Device-dependent count of medium
${BufferMdMissToday}
Count of buffer errors due to low
${BufferNoMemThisHour}
memory on node in current hour
Count of buffer errors due to low
${BufferNoMemToday}
memory on node in current day
Device-dependent count of small
${BufferSmMissThisHour}
Device-dependent count of small
${BufferSmMissToday}
${Caption}
User friendly node name
${Community}
Node community string
Contact information for person or
${Contact}
group responsible for node
${CPULoad}
Node CPU utilization rate at last poll
Day, date, and time of last poll
${CustomPollerLastStatisticsPoll}
attempt on node
Day, date, and time that node was
${CustomPollerLastStatisticsPollSuccess}
last successfully polled
${Description}
Node hardware and software
${DNS}
If node supports dynamic IP address
${DynamicIP}
assignment via BOOTP or DHCP (1);
static IP address return (0)
Internal unique identifier of the polling
${EngineID}
engine to which node is assigned
Filename of status icon for node and,
${GroupStatus}
in Orion NPM, its interfaces
${IOSImage}
Family name of Cisco IOS on node
${IOSVersion}
Cisco IOS version on node
${IP_Address}
Node IP address
Node IP address version (IPv4 or
${IP_Address_Type}
IPv6)
394

${LastBoot}
Day, date and time of last node boot

Time and date of last node database
and memory synchronization
Physical location of node
Node manufacturer or distributor and
family or version information
Maximum node response time , in
Total node memory used over polling
interval
Minimum node response time , in
Day, date and time of next scheduled
node polling
Time of next node rediscovery
Internal unique identifier of node
States if node supports SNMP or is
ICMP-only
ICMP packet loss percentage when
node last polled
Percentage of total node memory
used over polling interval
Node polling interval, in seconds
Node rediscovery interval, in minutes
Node response time, in milliseconds,
to last ICMP request
Node read/write community string;
acts as security code for read/write
SNMP access
SNMPv3 read/write credential
authentication key
States if the SNMPv3 read/write
credential authentication key is the
password
SNMPv3 read/write credential
authentication method
${LastSync}
${Location}
${MachineType}
${MaxResponseTime}
${MemoryUsed}
${MinResponseTime}
${NextPoll}
${NextRediscovery}
${NodeID }
${ObjectSubType}
${PercentLoss}
${PercentMemoryUsed}
${PollInterval}
${RediscoveryInterval}
${ResponseTime}
${RWCommunity}
${RWSNMPV3AuthKey}
${RWSNMPV3AuthKeyIsPwd}
${RWSNMPV3AuthMethod}
395
Node Variables
SNMPv3 read/write security context
information
SNMPv3 read/write credential key
States if the SNMPv3 read/write
credential privacy key is the
password
SNMPv3 read/write credential privacy
encryption method
User friendly name for SNMPv3
read/write credential
A network health score determined
additively by scoring the status of
monitored objects. In Orion NPM 1
point is provided for an interface in a
warning state, 1000 points for a down
interface, and 1 million points for a
down node. In SAM, 100 points is
provided for an application in a
warning state, 200 points for an
application in critical state, 500 is
status is unknown, and 1000 for a
down application.
States if node only supports SNMPv1
or SNMPv2
SNMPv3 authentication key
States if node SNMPv3
authentication key is password
SNMPv3 authentication type
Group or domain of user with
SNMPv3 access to node
SNMPv3 credential key
States if node SNMPv3 credential
key is the password
SNMPv3 credential key type
User friendly name for SNMPv3
credential
${RWSNMPV3Context}
${RWSNMPV3PrivKey}
${RWSNMPV3PrivKeyIsPwd}
${RWSNMPV3PrivMethod}
${RWSNMPV3Username}
${Severity}
${SNMPV2Only}
${SNMPV3AuthKey}
${SNMPV3AuthKeyIsPwd}
${SNMPV3AuthMethod}
${SNMPV3Context}
${SNMPV3PrivKey}
${SNMPV3PrivKeyIsPwd}
${SNMPV3PrivMethod}
${SNMPV3Username}
396

States the version of SNMP used by
the node
Statistics collection frequency, in
minutes
Numerical node status. For more
information, see Status Variables on
page1.
User friendly node status
Filename of node status icon
String reply to SNMP SYS_NAME
OID request
Vendor ID of the network
management subsystem in OID form.
Clearly determines the type of node.
Time, in hundredths of a second,
either since network monitoring
started (WMI) or since the monitored
device rebooted (SNMP).
Total node memory available
States if node is currently unmanaged
Day, date, and time when node is set
to Unmanaged
Day, date, and time when node is
scheduled to be managed
Node manufacturer or distributor
Filename of node vendor logo
${SNMPVersion}
${StatCollection}
${Status}
${StatusDescription}
${StatusLED}
${SysName}
${SysObjectID}
${SystemUpTime}
${TotalMemory}
${UnManaged}
${UnManageFrom}
${UnManageUntil}
${Vendor}
${VendorIcon}
Volume Variables
The following are valid volume variables.
Volume Variable
${Caption}
${FullName}
${LastSync}
Description
User friendly volume name
User friendly volume name including
captions of parent node and, in Orion
NPM, interface
Time and date volume last synchronized
in database and memory models
397

Day, date and time of next scheduled
volume polling
Scheduled time of next volume
${NextRediscovery}
rediscovery
${NodeID}
Internal unique identifier of parent node
${PollInterval}
Volume status polling interval, in seconds
Volume rediscovery interval, in minutes
${StatCollection}
Statistics collection frequency, in minutes
Numerical volume status: (0=Unknown,
${Status}
1=Up, 2=Shutdown, 3=Testing)
${StatusLED}
Filename of volume status icon
Number of volume allocation errors for
${VolumeAllocationFailuresThisHour}
this volume in last hour
Number of volume allocation errors for
${VolumeAllocationFailuresToday}
this volume in current day
${VolumeDescription}
User friendly volume description
${VolumeID}
Internal unique identifier of volume
Unique index of this volume within the
${VolumeIndex}
parent node
${VolumePercentUsed}
Percentage of volume currently in use
(Y) = volume is currently responding to
${VolumeResponding}
SNMP queries
${VolumeSize}
Size of volume, in bytes
${VolumeSpaceAvailable}
Total space available on volume, in bytes
${VolumeSpaceUsed}
Total space used on volume, in bytes
Volume type, as reported by
hrStorageType OID (Removable
${VolumeType}
Disk/Fixed Disk/Compact Disc/Virtual
Memory/RAM/etc)
${VolumeTypeIcon}
Filename of icon for volume type
${NextPoll}

The following examples illustrate some of the uses of variables.
Previous reboot was at ${LastBoot-Previous}.
Alert: ${NodeName} has exceptionally high response time. Average Response Time
is ${AvgResponseTime} and is varying from ${MinResponseTime} to
398
${MaxResponseTime}.
Current packet loss for ${NodeName} is ${%Loss}. Average Response time is
${AvgResponseTime} and is varying from ${MinResponseTime} to ${MaxResponseTime}.
Alert: The SNMP Community string used to query ${NodeName} has been changed
from ${Community-Previous} to ${Community}.
NPM uses the new Community String to query ${NodeName}.
Basic Alert Engine Variables

Vairables in the the following sections can be used in NPM basic alert messages.
Note: Each variable must be enclosed in braces and begin with a dollar sign, like
${NodeID}.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Alert-specificBuffer Errors
Date/Time
Interfaces
Interface Errors
Node Polling
Interface Status
Interface Traffic
Nodes
Node Polling
Node Statistics
Node Status
Object Types
Volumes
Volume Polling
Volume Statistics
Volume Status
Alert-specific
The following are valid alert-specific variables.
Alert-specific Variable Description
${AlertName}
Name of the Alert
${Property}
Property that this Alert is monitoring
${TriggerTime}
${LastResetTime}
399
Buffer Errors
${LongTriggerTime}
control panel defined Medium Date and Medium
Time)
${LongLastResetTime} control panel defined Medium Date and Medium
Time)
${TriggeredValue}
Value that triggered the Alert
Time of day that the Alert is active and can be
${AlertStartTime}
Triggered/Reset
Time of day that the Alert is active and can be
${AlertEndTime}
Triggered/Reset
Buffer Errors
The following are valid buffer-related variables.
Buffer Error Variable
Description
Buffer errors caused by low memory during the current
${BufferNoMemThisHour}
hour
Buffer errors caused by low memory during the current
${BufferNoMemToday}
day
${BufferSmMissThisHour} Small buffer misses during this hour
${BufferSmMissToday}
Small buffer misses during the current day
${BufferMdMissThisHour} Medium buffer misses during this hour
${BufferMdMissToday}
Medium buffer misses during the current day
${BufferBgMissThisHour} Big buffer misses during this hour
${BufferBgMissToday}
Big buffer misses during the current day
${BufferLgMissThisHour} Large buffer misses during this hour
${BufferLgMissToday}
Large buffer misses during the current day
${BufferHgMissThisHour} Huge buffer misses during this hour
${BufferHgMissToday}
Huge buffer misses during the current day
Date/Time
The following are valid date/time variables.
Date/Time Variable Description
400

Short Date and Short Time format)
${Date}
${LongDate}
${MediumDate}
${Time}
${DayOfWeek}
${D}
${DD}
${AbreviatedDOW} Current day of the week. Three character abbreviation.
${LocalDOW}
${M}
${MM}
${MMM}
${MMMM}
${DayOfYear}
${Year2}
Two digit year
${Year}
Four digit year
${H}
Current hour
${HH}
${Minute}
${S}
Current second.
${Second}
${AMPM}
AM/PM indicator
${DateTime}
Interfaces
The following are valid interface-related variables.
Interface Variable
${Caption}
${InterfaceID}
${Interface.Caption}
${Index}
Description
Description of the interface.
Unique ID of the interface. Network Performance Monitor
assigns a unique ID to every network object.
User-assigned name for this interface
Index of the interface within the network node.
401
Interface Errors
Numerical type of the interface. This information is
collected by NPM when discovering the network node.
${MAC}
Physical address (MAC Address) of the interface
${MTU}
Maximum Transmission Unit
Speed of the Interface discovered by Network
${InterfaceSpeed}
Performance Monitor when scanning the network node
${InterfaceName}
Name of the interface discovered from the node
Icon depicting the type of interface (Ethernet, Frame${InterfaceIcon}
Relay, ATM, Token Ring, wireless, etc).
ID of the Node to which this interface belongs. NPM
${NodeID}
${InterfaceTypeName} Type of interface. Discovered from ifType.
Full name of the interface including the name of the
${FullName}
network node it is in
${Counter64}
Interface supports IF-MIB high-capacity counters
${InterfaceType}
Interface Errors
The following are valid interface error-related variables.
Interface Error Variable Description
Cumulative number of receive discards for this interface
${InDiscardsToday}
today
Cumulative number of receive errors for this interface
${InErrorsToday}
today
Cumulative number of transmit errors for this interface
${OutErrorsToday}
today
Cumulative number of transmit discards for this
${OutDiscardsToday}
interface today
${InDiscardsThisHour} Cumulative number of receive discards for this in
Cumulative number of receive errors for this interface
${InErrorsThisHour}
this hour (this counter resets at the top of the hour)
Cumulative number of transmit errors for this interface
${OutErrorsThisHour}
this hour (this counter resets at the top of the hour)
Cumulative number of transmit discards for this
${OutDiscardsThisHour} interface this hour (this counter resets at the top of the
hour)
402
Interface Polling
The following are valid interface polling-related variables.
Interface Polling
Variable
${PollInterval}
Description
How often the interface should be polled (seconds)

How often the node/interface should be rediscovered
(minutes)
Scheduled time for the next complete discovery of this
${NextRediscovery}
interface
${NextPoll}
Scheduled time for next poll of this interface
${StatCollection}
Frequency of statistics collection
Interface Status
The following are valid interface status-related variables.
Interface Status
Variable
Description
Administrative status of the interface (enabled or

disabled)
LED showing current administrative status of the
${AdminStatusLED}
interface (enabled or disabled)
Last date and time the interface changed operational
${InterfaceLastChange}
status
${OperStatus}
Operational status of the interface
${OperStatusLED}
LED showing current operational status of the interface
${Status}
Current status of the interface (up, down, shutdown, etc.)
${StatusLED}
Current status of the interface (up, down, shutdown, etc.)
${AdminStatus}
Interface Traffic
The following are valid interface traffic-related variables.
Interface Traffic
Variable
Description
${OutBandwidth}
User-defined transmit bandwidth of the Interface. The

Transmit and Receive bandwidth can each be set
independently in order to accurately monitor asymmetric
403
Nodes
circuits.
${OutBps}
Current amount of traffic being transmitted by the interface
${InBps}
Current amount of traffic being received by the interface
Current rate of transmitted packets per second by the
${OutPps}
interface
Current rate of received packets per second by the
${InPps}
interface
Average packet size of the packets currently being
${InPktSize}
received by the interface
${OutUcastPps}
Current rate of transmitted unicast packets per second
${OutMCastPps}
Current rate of transmitted multicast packets per second
${InUcastPps}
Current rate of received unicast packets per second
${InMcastPps}
Current rate of received multicast packets per second
Average packet size of the packets currently being
${OutPktSize}
transmitted by the interface
Current percentage of utilization on the receive side of the
${InPercentUtil}
interface
Current percentage of utilization on the transmit side of the
${OutPercentUtil}
interface
${MaxInBpsToday} Peak received bps today for the interface
${MaxOutBpsToday} Peak transmitted bps today for the interface
${MaxInBpsTime}
Time (today) of the peak bps received
${MaxOutBpsTime} Time (today) of the peak bps transmitted
User-defined receive bandwidth of the Interface. The
Transmit and Receive Bandwidth can each be set
${InBandwidth}
independently in order to accurately monitor asymmetric
circuits.
Nodes
The following are valid node variables.
Node Variable
${NodeID}
Description
Unique ID automatically assigned to each node
IP Address of the node. This is the IP address that is used for all
${IP_Address}
management functions.
${IP_Address_ Node IP address version (IPv4 or IPv6)
404

Type}
${NodeName}
${SysName}
User assigned name for this node

System name of the node
DNS name determined using a reverse DNS lookup. The DNS
${DNS}
entry is checked during rediscovery of the network node.
${SysObjectID} Unique identifier assigned to this node by the manufacture
${Vendor}
The manufacture of the network node
${Location}
Location retrieved from the system MIB
System Contact. This information is collected by Network
${Contact}
Performance Monitor when discovering the network node.
System description of the node. This information is collected by
${Description} Network Performance Monitor when discovering the network
node.
${LastBoot}
Date and time the machine last booted
${Community} SNMP community string used to communicate with this node
${VendorIcon} Icon depicting the type of machine
${IOSImage}
Cisco IOS image family type
${IOSVersion} Cisco IOS version
${MachineType} The machine type or manufacture of the network node
Node Polling
The following are valid node polling-related variables.
Node Polling Variable Description
${RediscoveryInterval} How often the node should be rediscovered (in minutes)
${NextRediscovery} Date and time of next rediscovery
How often the node/interface should be polled. (in
${PollInterval}
seconds)
${NextPoll}
Scheduled time for the next poll of the node/interface
${StatCollection}
Node Statistics
The following are valid node statistics-related variables.
Node Statistics
Variable
Description
405
Node Status
${ResponseTime}
Current response time of the node in milliseconds

Percent packet loss over the last few minutes. Packet
${PercentLoss}
loss is calculated from the number of ICMP packets that
are dropped when polling the node.
Average response time for the node over the last few
${AvgResponseTime}
minutes
${MinResponseTime} Shortest response time over the last few minutes
${MaxResponseTime} Longest response time over the last few minutes
${CPULoad}
Percentage of CPU usage
${TotalMemory}
Total RAM reported in node
${MemoryUsed}
Total RAM in allocated in node
${PercentMemoryUsed} Percentage of used RAM to total RAM
Node Status
The following are valid node status-related variables.
Node Status
Variable
${Status}
${StatusLED}
Description
Current status of the node. (up, down, warning, etc)

Current status icon of the node
Current status icon of the Node and all its interfaces (Up,
${GroupStatus}
Down, Warning, etc)
${StatusDescription} Current status of the Node and its interfaces.
A network health score determined additively by scoring the
status of monitored objects. In Orion NPM 1 point is
provided for an interface in a warning state, 1000 points for
${Severity}
a down interface, and 1 million points for a down node. In
SAM, 100 points is provided for an application in a warning
state, 200 points for an application in critical state, 500 is
status is unknown, and 1000 for a down application.
Object Types
The following are valid object type variables.
Object Types Variable Description
${ObjectType}
Type of network object
${ObjectSubtype}
Subtype of the network object
406
Volumes
The following are valid volume variables.
Volume Variable
Description
ID of the network node to which this volume belongs.
${NodeID}
Network Performance Monitor assigns a unique ID to
every network object.
Unique ID of the volume. Network Performance Monitor
${VolumeID}
${Caption}
User-assigned name for this volume
${VolumeIndex}
Index of the volume within the Network Node
${VolumeType}
Type of volume. Discovered from hrStorageType
${VolumeDescription} Description of the volume
Full name of the volume including the name of the
${FullName}
Network Node it is in.
Volume Polling
The following are valid volume polling-related variables.
Volume Polling
Description
Variable
${PollInterval}
How often the volume should be polled
${StatCollection}
${NextPoll}
Scheduled time for next poll of this volume
${RediscoveryInterval} Rediscovery Interval of this Volume
Scheduled time for the next complete discovery of this
${NextRediscovery}
volume.
Volume Statistics
The following are valid volume statistics-related variables.
Volume Statistics Variable
${VolumeSize}
${VolumeSpaceUsed}
Description
Volume size in bytes
Total bytes used on volume
Percentage of volume used as discovered
${VolumePercentUsed}
by SNMP
${VolumeAllocationFailuresThisHour} Number of volume allocation errors this
407
Volume Status
${VolumeAllocationFailuresToday}
hour
Number of volume allocation errors today
Volume Status
The following are valid volume status-related variables.
Volume Status
Variable
${Status}
${StatusLED}
Description
Current status of the volume (up, down, shutdown, etc.)

Current status of the volume (up, down, shutdown, etc.)
Indicates whether or not the volume is currently
${VolumeResponding}
responding to SNMP queries

The following examples illustrate some of the uses of variables.
Interface ${FullName} has changed from ${Status-Previous} to ${Status} ${FullName}

rebooted at ${LastBoot}.
Previous reboot was at ${LastBoot-Previous}.
Interface ${Caption} on ${NodeName} is ${Status}. This indicates a problem with this
network segment that should be investigated. This problem was identified at
${DateTime}.
Alert: ${NodeName} has exceptionally high response time. Average Response Time
is ${AvgResponseTime} and is varying from ${MinResponseTime} to ${MaxResponseTime}.
Alert: Percent Utilization of ${Fu1lName} is above ${OutPercentUtil}. Current traffic
load on this interface is ${InBps} Received and ${OutBps} Transmitted.
Current packet loss for ${NodeName} is ${%Loss}. Average Response time is
${AvgResponseTime} and is varying from ${MinResponseTime} to ${MaxResponseTime}.
Alert: The SNMP Community string used to query ${NodeName} has been changed
from ${Community-Previous} to ${Community}.
NPM uses the new Community String to query ${NodeName}.
Basic Alert Engine Suppression Examples

Many error conditions can occur in a network to trigger multiple alerts from a
single event. There are also conditions that may not need to trigger an alert by
themselves but that should trigger alerts if they occur with other conditions. Alert
Suppression allows you to set up conditions to analyze alert situations and give
you the information you need to determine the root cause of the problem.
408

By default, alert suppression is not enabled for NPM alerts. When using the basic
alert engine, you may specify alert suppression either when any of one or more
conditions exist, or if all of two or more conditions exist.
Notes:
l
Alert suppression does not preclude knowledge of critical events. Network

events are logged in the database whether alert suppression is enabled or
not.
Proceed with care when configuring alert suppressions, as it is possible to
suppress alerts containing important information about your network.
SolarWinds suggests carefully considering any alert suppression scheme,
using a diagram of your network, and then extensively testing any scenario
in which you intend to apply alert suppression.
A few alert suppression situations are illustrated using the following diagram:
Note: The NPM server is located on Switch 2, at the top right.
Failure of redundant servers

In the diagram, both WServers are identical to provide failover, redundancy,
and load balancing. If WServer4 fails but WServer5 is still functioning, you
may want to be alerted immediately if the failure occurs during business
hours, though it might not justify a pager alert in the middle of the night. In
this case, you would configure the alert for the failure of one WServer to be
suppressed unless the other also fails.
Apparent failure of dependent nodes downstream of a failed router
In the diagram, there are dependencies among devices. For instance, if
Router C fails, the Orion NPM server cannot reach Switch 3 or any of the
four workstations. You will want to know if and when the workstations have
failed, but only if Router C and Switch 3 have not failed. You would
configure the alerts such that a failure alert for the workstations is dependent
on Router C and Switch 3 being operational.
Failure of a network link when a redundant link is still functional
409

In some cases, you may only want to know of the failure of the link between
Routers B and C if the alternative link through Router A is also down.
Failure of load balancing between devices
You may have configured your network to balance traffic across web
servers. In this case, you could configure an alert notifying you of high CPU
load on any one of the servers but only if another is experiencing much
lower usage.

In this example, an alert notifies you when nodes on a subnet go down. In this
case, the nodes are on a segment of your network on the other side of a specific
router, and you only want alerts if that router is still operational.
Note: The router should not be included in the group of objects monitored by this
alert, as its failure is the trigger for suppressing the alert. To be notified of router
failure, you must set up another alert.
The following procedure configures this example of alert suppression.

To configure a dependant node alert suppression:
3. Click New Alert.
4. Click General, enter a name for your alert, and then check Enable this
Alert.
5. Click Property to Monitor.
6. Check Node Status> Status.
Note: Select only one property from those that are available.
7. Click Monitored Network Objects, and then select the workstations that are
on the segment of your network that is on the other side of the router.
8. Click Alert Trigger.
9. Check Trigger Alert when Status is> Unknown, Down, and Warning.
10. Check Reset Alert when Status is> Up.
410

11. Click Alert Suppression, and then select Suppress this alert if ANY of
the selected suppressions are active.
Note: The window opens to display a list of current suppressions, if any
exist, and buttons that you can use to add, edit, and delete conditions.
12. Click Add.
13. Click Property to Monitor, and then select Node Status> Status.
Note: Select only one property from those that are available.
14. Click Network Object.
15. Select the router that stands between NPM and the subnet for which you
have configured the node down alert.
Note: The type of objects available for monitoring depends upon the
choice that you made in the Properties to Monitor tab. If you had chosen to
monitor an interface-related property, you would see a list of available interfaces. Since youve chosen a node-related property, you will see a list of
nodes.
16. Click Suppression Trigger.
17. Check Down, Warning, and Unknown on the tab, and then click OK.
Note: For status conditions, you may specify more than one condition.
18. Check the suppressions that you want to apply in order to enable them.
Note: By default, suppressions are not turned on.
19. If you want to add more conditions, repeat this procedure, by clicking
Add to begin again.
Failure of Load Balancing Alert

If you have multiple servers configured to share the load on your website, you will
want to know if one of them is not performing as it should. For the purposes of this
example, well assume that you want to be alerted when the CPU load on two
servers exceeds 80 percent, but only if one shows a CPU load of 40 percent or
less. In other words, the alert is suppressed if the second server reports greater
than 40 percent utilization, as shown in the diagram.
You will need to configure two alerts, one for each server. They will be identical,
except for the server that each alert monitors. Proceed to follow these steps to
411

configure these alerts. For more information, see Creating and Managing Alerts
on page1.
To configure a load balancing failure alert:
3. Click New Alert.
4. Click General.
5. Enter a name for your alert, and then check Enable this Alert.
7. Check Node Statistics> % CPU Utilization.
8. Click Monitored Network Objects, and then check the server that you want
to monitor.
9. Click Alert Trigger.
10. Select a condition to Trigger Alert when % CPU Utilization, and then
enter the trigger value: Trigger Value 80% for our example.
11. Select a condition to Reset Alert when % CPU Utilization, and then enter
the reset value: Reset Value 80% for our example.
12. If you want to set timeframe parameters, use the Time of Day tab.
13. Click Alert Suppression.
14. Select Suppress this alert if ANY of the selected suppressions are active.
Note: Any previously configured alerts will be listed, unchecked.
15. Click Add.
17. Check Node Statistics> % CPU Utilization.
18. Click Network Object.
19. Check the second server of the pair whose load should be balanced.
20. Click Suppression Trigger.
21. Select Greater Than.
22. Type 40 in the text-entry field, and then click OK.
23. Check the suppression that you just defined to activate it.
24. Repeat the procedure, reversing the server choices made for alerting and
suppression.

In addition to the advanced alerts and alert variables that are available to all Orion
products, the monitoring features that NPM alone provides can also use the
following NPM-specific alert variables:
412
l
l
l
l

Interfaces

The following are valid interface poller variables.
Note: At least one of the CustomPollerStatus variables from the tables below must
be included in the trigger condition of all interface poller alerts.
Interface Poller Assignment
Variable
Description
User friendly name of a specific assignment in

the form: <PollerName> - <NodeName> ${AssignmentName}
<InterfaceName>. Interface name is '0' if this is a
node poller.
Internal unique ID (as guid) of specific
${CustomPollerAssignmentID}
assignment of a poller to a node or interface.
Internal unique ID of interface (as integer) in this
${InterfaceID}
assignment. '0' if this is a node poller.
Internal unique ID of node (as integer) in this
${NodeID}
assignment.
Internal unique poller ID (as guid) in this
${PollerID}
assignment
Interface Poller Status
Variable
${CustomPollerAssignmentID}
${DateTime}
${DateTimeUTC}
${Rate}
Description
Internal unique ID (as guid) of the specific
assignment of a poller to a node or interface.
Date and time poller statistic was last collected.
UTC Date/time statistics last collected for this
assignment
For a poller with a MIB value type of 'Rate', this
field contains numeric data collected from the
OID. For a poller with a MIB value type of
'Counter', this field contains the change in the
previous value as normalized to the polling
interval. For a 'Raw Value' poller this field is null.
413
${RawStatus}
${Status}
${Total}
For poller with a MIB value type 'Rate' or

'Counter', this field is null. For a poller with MIB
value 'Raw Value' and an OID response value
that is numeric, this field contains the numeric
value. For a poller with MIB value 'Raw Value'
and an OID response value that is not numeric,
this field is null. For enumerations this field
contains the actual numeric value returned from
the OID instead of the user friendly text. Status
comparisons that are numeric (greater than and
less than) should use this field. Status values that
are text descriptions should use the 'Status' field.
For a poller with a MIB value type of 'Rate' or
'Counter', this field is null. For a poller with a MIB
value of 'Raw Value' this field contains the value
from the OID 'cooked' according to its sub-type.
Enumerations contain user friendly text instead of
a numeric value returned from the OID.
For a poller with a MIB value type of 'Rate', this
field is null. For a poller with a MIB value type of
'Counter' this field contains the change in the
previously collected value. For a poller with a
MIB value of 'Raw Value' this field is null.
Rate pollers only write to the 'Rate' field; counter pollers only write to the 'Total'
and 'Rate' fields; and status pollers only write to the 'Status' field, unless they can
be successfully converted to a numeric value, in which case the numeric value is
also written to the 'RawStatus' field.
Interface Poller Variable
Description
Internal unique ID of time units as represented by
${DefaultDisplayTimeUnitID}
UI
${Description}
Poller description
(1) indicates poller currently up and collecting,
${Enabled}
otherwise (0)
${Format}
Currently unused
User friendly name of group to which this poller
${GroupName}
belongs
${IncludeHistoricStatistics} (1) indicates that every statistic collection is
414

inserted as a new record. (0) indicates that this
statistic is updated so that
${LastChange}
${LastChangeUTC}
${MIB}
${NetObjectPrefix}
${OID}
${ParserID}
${PollerID}
${PollerType}
${SNMPGetType}
${TimeUnitID}
${TimeUnitQuantity}
${UniqueName}
${Unit}
it only has one statistic record.

Date and time that poller record last changed
Date and time that poller record last changed
(universal time)
Generally recognized OID name
(N) if this is a node poller. (I) if this is an interface
poller
OID used to gather information
Internal unique ID of the parser (sub-type) of this
poller, where 1=None, 2=text, 3=enum,
4=macAddress, 5=counter, 6=gauge,
10=TrueFalse, 11=FalseTrue, 12=CleanMac,
14=TimeTicks, 15=HighBandwidth,
16=AdminStatus, 17=OperationalStatus
Poller unique ID (guid)
(R) for rate poller, (C) for counter poller, (S) for
status poller
SNMP request type (Get or GetNext)
Internal unique ID of time unit
(msec/sec/min/hr/days) to which poller is
normalizing
Number of time units to which poller is normalizing
Poller user friendly name
User-entered description of unit collected
(bytes/degrees/dbs)
Interface Variables
The following are valid interface variables.
Interface Variable
${AdminStatus}
${AdminStatusLED}
Description
Numeric administrative status of interface. For
more information, see Status Icons and
Identifiers on page1.
Filename of current interface administrative
415
Interface Variables
status icon
User friendly description of interface
${Caption}
combining name with other identifying
information
States if interface supports IF-MIB high
${Counter64}
capacity counters
Indicates if transmit and receive bandwidth
${CustomBandwidth}
fields are user-controlled (1) or controlled by
automated detection via ifSpeed MIB (0)
Day, date, and time that this interface was last
${CustomPollerLastStatisticsPoll}
polled by the current poller
User friendly name combining captions of
${FullName}
parent node and interface
Internal name discovered for this interface with
${IfName}
the ifName OID
${InterfaceID}
Internal unique identifier of selected interface
${InBandwidth}
Incoming bandwidth of interface
${Inbps}
Current incoming traffic, in bps, to interface
Number of incoming packets discarded by
${InDiscardsThisHour}
interface in last hour
Number of incoming packets discarded by
${InDiscardsToday}
interface in current day
${InErrorsThisHour}
Number of interface receive errors in last hour
Number of interface receive errors in current
${InErrorsToday}
day
Current incoming multicast traffic, in packets
${InMcastPps}
per second, to interface
${InPercentUtil}
Current percent utilization of interface receive
${InPktSize}
Average size of incoming packets to interface
Current incoming traffic, in packets per
${InPps}
second, to interface
Alias or description of interface discovered
${InterfaceAlias}
from parent node
Filename of the icon used to represent the
${InterfaceIcon}
interface type
416

${InterfaceIndex}
${InterfaceLastChange}
${InterfaceMTU}
${InterfaceName}
${InterfaceSpeed}
${InterfaceType}
${InterfaceTypeDescription}
${InterfaceTypeName}
${InUcastPps}
${LastSync}
${NextPoll}
${NextRediscovery}
${NodeID}
${ObjectSubType}
${OperStatusLED}
${OutBandwidth}
${Outbps}
${OutDiscardsThisHour}
${OutDiscardsToday}
${OutErrorsThisHour}
${OutErrorsToday}
${OutMcastPps}
Index of selected interface on parent node

sysUpTime value when the interface entered
current operational state
Interface Maximum Transfer Unit: the largest
packet the interface can handle
User friendly name
Interface bandwidth
IANA type of selected interface
User friendly description of interface type
User friendly name of interface IANA type
Current incoming unicast traffic, in packets per
second, to interface
Time and date of last interface database and
memory synchronization
Day, date and time of next scheduled interface
polling
Next interface rediscovery time
Internal unique identifier of node that is parent
to the selected interface
States if parent node supports SNMP or is
ICMP only
Filename of current interface operational
status icon
Outgoing bandwidth of interface
Current outgoing traffic, in bps, from interface
Number of outgoing packets discarded by
interface in last hour
Number of outgoing packets discarded by
inteNumber of interface transmit errors in last
hourrface in current day
Number of interface transmit errors in last hour
Number of interface transmit errors in current
day
Current outgoing multicast traffic, in packets
per second, from interface
417

${OutPercentUtil}
${OutPktSize}
${OutPps}
${OutUcastPps}
${PhysicalAddress}
${PollInterval}
${Severity}
${StatCollection}
${Status}
${StatusLED}
Current percent utilization of interface transmit

Average size of outgoing packets from
interface
Current outgoing traffic, from interface, in pps
Current outgoing unicast traffic, in packets per
second, from interface
Physical address of interface
Interval, in seconds, between polling attempts
for interface
Interval, in minutes, between rediscovery
attempts for interface
A network health score providing 1 point for an
interface in a warning state, 1000 points for a
down interface, and 1 million points for a down
node
Interface statistics collection frequency, in
minutes
Numeric interface status. . For more
information, see Status Icons and Identifiers
on page1.
Filename of current interface status icon

The following are valid Universal Device Poller variables.
Universal Device Poller Variable Description
The value returned by a Raw Value-type
${CustomPollerStatus.RawStatus}
${DateTime}
Date/Time
Assigned description of a Universal Device
${Description}
Poller
${Enabled}
Enabled status of a Universal Device Poller
The Management Information Base in which
${MIB}
the OID polled by a Universal Device Poller
is located
The object ID polled by a Universal Device
${OID}
Poller
418
${Rate}
${Status}
${Total}
${UniqueName}
The value returned by a Rate-type Universal

Device Poller
Functional status of the Universal Device
Poller
Total
Assigned name of a Universal Device Poller

The following are valid wireless node variables.
Wireless Node Variable
Description
States if node is being polled by the wireless poller (1)
${WirelessAP}
or not (0)
${WirelessLastStatPoll} Date and time node last polled by wireless poller
Interval, in minutes, between wireless polling attempts
${WirelessPollInterval}
on node
Date and time node may be polled again by wireless
${WirelessStatBlockUntil}
poller
419

Calculation of the 95th percentile, a well-known statistical standard used to
discard maximum spikes, is based on 5 minute data samples. The calculation
gathers these values every 5 minutes for however long you select, throws away
the top 5%, yielding the 95th percentile value at the beginning of the list.
Consider the following example of how the 95th percentile is calculated for a 10
hour work day from 8am to 6pm (600 minutes):
1. Over the 10 hours, the following 120 values were collected for inbound
traffic (Mb/s):
0.149 0.623 0.281 0.136 0.024 0.042 0.097 0.185 0.198 0.243 0.274 0.390 0.971
0.633 0.238 0.142 0.119 0.176 0.131 0.127 0.169 0.223 0.291 0.236 0.124 0.072
0.197 0.105 0.138 0.233 0.374 0.290 0.871 0.433 0.248 0.242 0.169 0.116 0.121
0.427 0.249 0.223 0.231 0.336 0.014 0.442 0.197 0.125 0.108 0.244 0.264 0.190
0.471 0.033 0.228 0.942 0.219 0.076 0.331 0.227 0.849 0.323 0.221 0.196 0.223
0.642 0.197 0.385 0.098 0.263 0.174 0.690 0.571 0.233 0.208 0.242 0.139 0.186
0.331 0.124 0.249 0.643 0.481 0.936 0.124 0.742 0.497 0.085 0.398 0.643 0.074
0.590 0.771 0.833 0.438 0.242 0.092 0.376 0.231 0.627 0.249 0.663 0.181 0.636
0.224 0.342 0.697 0.285 0.108 0.211 0.074 0.490 0.271 0.133 0.338 0.242 0.519
0.376 0.331 0.227
2. When reordered from high to low:
0.971 0.942 0.936 0.871 0.849 0.833 0.771 0.742 0.697 0.690 0.663 0.643 0.643
0.642 0.636 0.633 0.627 0.623 0.590 0.571 0.519 0.497 0.490 0.481 0.471 0.442
0.438 0.433 0.427 0.398 0.390 0.385 0.376 0.376 0.374 0.342 0.338 0.336 0.331
0.331 0.331 0.323 0.291 0.290 0.285 0.281 0.274 0.271 0.264 0.263 0.249 0.249
0.249 0.248 0.244 0.243 0.242 0.242 0.242 0.242 0.238 0.236 0.233 0.233 0.231
0.231 0.228 0.227 0.227 0.224 0.223 0.223 0.223 0.221 0.219 0.211 0.208 0.198
0.197 0.197 0.197 0.196 0.190 0.186 0.185 0.181 0.176 0.174 0.169 0.169 0.149
0.142 0.139 0.138 0.136 0.133 0.131 0.127 0.125 0.124 0.124 0.124 0.121 0.119
0.116 0.108 0.108 0.105 0.098 0.097 0.092 0.085 0.076 0.074 0.074 0.072 0.042
0.033 0.024 0.014
420

3. Drop the first 6, as these equal the top 5% of the values:
0.771 0.742 0.697 0.690 0.663 0.643 0.643 0.642 0.636 0.633 0.627 0.623 0.590
0.571 0.519 0.497 0.490 0.481 0.471 0.442 0.438 0.433 0.427 0.398 0.390 0.385
0.376 0.376 0.374 0.342 0.338 0.336 0.331 0.331 0.331 0.323 0.291 0.290 0.285
0.281 0.274 0.271 0.264 0.263 0.249 0.249 0.249 0.248 0.244 0.243 0.242 0.242
0.242 0.242 0.238 0.236 0.233 0.233 0.231 0.231 0.228 0.227 0.227 0.224 0.223
0.223 0.223 0.221 0.219 0.211 0.208 0.198 0.197 0.197 0.197 0.196 0.190 0.186
0.185 0.181 0.176 0.174 0.169 0.169 0.149 0.142 0.139 0.138 0.136 0.133 0.131
0.127 0.125 0.124 0.124 0.124 0.121 0.119 0.116 0.108 0.108 0.105 0.098 0.097
0.092 0.085 0.076 0.074 0.074 0.072 0.042 0.033 0.024 0.014
4. The 95th percentile is 0.771.
421

When editing comparison criteria, the following regular expressions can be used
for pattern matching. Examples a re provided at the end of this section.
Characters
Character
Any character
except
[,\,^,$,.,|,?,*,+,(,),
\ (backslash)
followed by any
of [,\,^,$,.,|,?,*,+,
(,),
\xFF where FF
are 2
hexadecimal
digits
\n, \r and \t
Description
All characters except the listed special
characters match a single instance of
themselves.
Example
a matches a
A backslash escapes special characters to

suppress their special meaning.
\+ matches +
Matches the character with the specified

ASCII/ANSI value, which depends on the
code page used. Can be used in character
classes.
Match an LF character, CR character and a
tab character respectively. Can be used in
character classes.
\xA9 matches
when using the
Latin-1 code
page.
\r\n matches a
DOS/Windows
CRLF line break.
Character Classes or Character Sets [abc]

Character
Classes or
Sets
Description
[(opening
square
bracket)
Starts a character class. A character class matches a

single character out of all of the possibilities offered
by the character class. Inside a character class,
different rules apply. The rules in this section are
only valid inside character classes. The rules
outside this section are not valid in character
Example
422

classes, except \n, \r, \t and \xFF
Any character
except ^,-,],\
add that
character to the
All characters except the listed special characters.
possible
matches for the
character
class.
\ (backslash)
A backslash escapes special characters to suppress
followed by
their special meaning.
any of ^,-,],\
- (hyphen)
except
Specifies a range of characters. (Specifies a hyphen
immediately
if placed immediately after the opening [)
after the
opening [
^ (caret)
immediately
after the
opening [
Negates the character class, causing it to match a

single character not listed in the character class.
(Specifies a caret if placed anywhere except after
the opening [)
\d, \w and \s
Shorthand character classes matching digits 0-9,

word characters (letters and digits) and whitespace
respectively. Can be used inside and outside
character classes
[abc]
matches a,
b or c
[\^\]]
matches ^
or ]
[a-zA-Z0-9]
matches
any letter
or digit
[^a-d]
matches x
(any
character
except a, b,
c or d)
[\d\s]
matches a
character
that is a
digit or
whitespace
Anchors
Anchors Description
Example
^. matches
Matches at the start of the string to which the regular
expression pattern is applied. Matches a position rather than a in
^ (caret) a character. Most regular expression flavors have an option abc\ndef.
to make the caret match after line breaks (i.e. at the start of a Also
matches d
line in a file) as well.
423
Quantifiers
in "multiline"
mode.
.$matches
Matches at the end of the string to which the regular
f in
expression pattern is applied. Matches a position rather than abc\ndef.
$
a character. Most regular expression flavors have an option Also
(dollar) to make the dollar match before line breaks (i.e. at the end of matches c
a line in a file) as well. Also matches before the very last line in "multibreak if the string ends with a line break.
line"
mode.
Matches at the start of the string to which the regular
\A.
\A
expression pattern is applied to. Matches a position rather matches a
than a character. Never matches after line breaks.
in abc
.\Z
expression pattern is applied. Matches a position rather than matches f
\Z
a character. Never matches before line breaks, except for
in
the very last line break if the string ends with a line break.
abc\ndef
.\z
matches f
\z
expression pattern is applied. Matches a position rather than
in
a character. Never matches before line breaks.
abc\ndef
Quantifiers
Quantifiers Description
Example
?
abc?
Makes the preceding item optional. The optional item is
(question
matches
included in the match, if possible.
mark)
ab or abc
Makes the preceding item optional. The optional item is abc??
??
excluded in the match, if possible. This construct is often matches
excluded from documentation due to its limited use.
ab or abc
Repeats the previous item zero or more times. As many .* matches
items as possible will be matched before trying
"def" "ghi"
* (star)
permutations with fewer matches of the preceding item, in abc
up to the point where the preceding item is not matched at "def" "ghi"
all.
jkl
.*?
Repeats the previous item zero or more times. The
*? (lazy
424
star)
+ (plus)
+? (lazy
plus)
{n} where
n is an
integer >=
1
{n,m}
where n
>= 1 and
m >= n
{n,m}?
where n
>= 1 and
m >= n
matches
"def" in
abc "def"
"ghi" jkl
.+ matches
Repeats the previous item once or more. As many items
"def" "ghi"
as possible will be matched before trying permutations
in abc
with fewer matches of the preceding item, up to the point
"def" "ghi"
where the preceding item is matched only once.
jkl
.+?
Repeats the previous item once or more. The engine first
matches
matches the previous item only once, before trying
"def" in
permutations with ever increasing matches of the
abc "def"
preceding item.
"ghi" jkl
engine first attempts to skip the previous item before
trying permutations with ever increasing matches of the
preceding item.
Repeats the previous item exactly n times.
Repeats the previous item between n and m times. Will

try to repeat m times before reducing the repetition to n
times.
Repeats the previous item between n and m times. Will
try to repeat n times before increasing the repetition to m
times.
Repeats the previous item at least n times. Will try to

match as many items as possible before trying
{n,} where
permutations with fewer matches of the preceding item,
n >= 1
up to the point where the preceding item is matched only
m times.
Repeats the previous item between n and m times. The
{n,}?
engine first matches the previous item n times before
where n
trying permutations with ever increasing matches of the
>= 1
preceding item.
425
a{3}
matches
aaa
a{2,4}
matches
aa, aaa or
aaaa
a{2,4}?
matches
aaaa, aaa
or aa
a{2,}
matches
aaaaa in
aaaaa
a{2,}?
matches
aa in
aaaaa
Dot
Dot
Dot
Description
Character
Matches any single character except line
. (dot)
break characters \r and \n.
Example
. matches x or most any
other character
Word Boundaries
Word
Description
Example
Boundary
Matches at the position between a word character (anything
matched by \w) and a non-word character (anything matched .\b
\b
by [^\w] or \W) as well as at the start and/or end of the string if matches
the first and/or last characters in the string are word
c in abc
characters.
Matches at the position between two word characters (i.e the \B.\B
\B
position between \w\w) as well as at the position between
matches
two non-word characters (i.e. \W\W).
b in abc
Alternation
Alternation
Description
Character
|
Causes the regular expression engine to match either
(vertical bar the part on the left side or the part on the right side.
or pipe) Can be strung together into a series of options.
|
The vertical bar has the lowest precedence of all

(vertical bar operators. Use grouping to alternate only part of the
or pipe) regular expression.
Example
abc|def|xyz
matches abc,
def or xyz
abc(def|xyz)
matches
abcdef or
abcxyz

The following examples illustrate uses of regular expression pattern matching.
snmp-server community public
Finds any line that includes the text snmp-server community public. There can
be text before and/or after the string on the same line.
service tcp-keepalives-in.*\n(.*\n)*.*service tcp-keepalives-out
426

Finds the first line service tcp-keepalives-in and then looks for service tcpkeepalives-out on any line after that. The regular expression string .*\n(.*\n)*.* is
used to search any number of lines between strings.
access-list 105 deny.*tcp any any eq 139 log
Finds the line with access-list 105 deny, followed by any number of characters
of any type, followed by tcp any any eq 139 log on the same line. The regular
expression string .* finds any character and any number of characters on the
same line. This expression can be used to find spaces, tabs, numbers,
letters, or special characters.
ntp clock-period \d*
Finds any line that includes ntp clock-period, followed by any number. The
regular expression string \d* will find any number at any length, such as 3,
48, or 2394887.
user \x2a
Finds any line that includes user *. The regular expression string \x, followed
by a hexadecimal value, specifies an individual character. In this example,
\x2a represents the asterisk character, which has a hexadecimal value of 2a.
427
428

If you have problems with NPM, the causes are usually related to an incorrect
configuration o r corrupted files. The following suggestions can often clear up
these problems.
Back Up Your Data

As a first step in any troubleshooting procedure, you should back up your Orion
Network Performance Monitor database. For more information, see Using SQL
Server Management Studio on page1.
Verify Program Operation

Orion NPM must run several components at the same time to deliver information.
Confirm that the following components are running:
l
l
l
Services:
o Message Queuing
o Net.Tcp Port Sharing Service
o SNMP Trap Service
o SolarWinds Alerting Engine service
o SolarWinds Collector Data Processor, Management Agent, and Polling
Controller services
o SolarWinds Information Service
o SolarWinds Job Engine and Job Engine v2
o SolarWinds Job Scheduler
o SolarWinds Network Performance Monitor Service.
o SolarWinds Orion Information Service
o SolarWinds Orion Module Engine
o SolarWinds Syslog and Trap Services
SQL Server
Internet Information Service (IIS)
429
Stop and Restart

Many problems disappear when programs are restarted. Stopping and restarting
Internet Information Service (IIS) may eliminate web page problems. Problems
with polling or data gathering may be eliminated by stopping and restarting the
SolarWinds Network Performance Monitor Service using the available shutdown
tool that you can locate as follows:
Click Start> All Programs> SolarWinds Orion> Advanced Features> Orion
Service Manager.
For a complete refresh of the system, reboot the computer.
Run the Configuration Wizard

Running the Configuration Wizard, which refreshes files on the web server and
performs checks on the structure of your database, may solve many problems.
Note: Before you run the Configuration Wizard, you should close all open
applications and stop the SolarWinds Network Performance Monitor Service in
the Windows Services Control Panel. It will be restarted by the Wizard at the end
of its process.
Adjusting Interface Transfer Rates

NPM monitors the actual transfer rates on the interfaces and calculates the
percent utilization in realtime, as it is requested in reports or within the user
interface. Usually when you see interface utilization over 100% it is because the
Transmit and Receive bandwidth values for this interface in Orion NPM are
incorrect.
To update interface transfer rates:
2. In the web console, click the node that contains the interface you want to
update. This opens the Node Details view for the parent node of the interface you want to edit.
3. In the Current Percent Utilization of Each Interface, or any other interfacerelated resource on the Node Details view, click the interface you want to
edit. This opens the Interface Details view for the interface you want to edit.
4. In the Interface Details resource, click Edit Interface.
5. Check Custom Bandwidth.
430

6. Enter desired values in the Transmit Bandwidth and Receive Bandwidth
fields, and then click Submit.

If you are having difficulty acquiring expected values from a selected variable,
using the ${VariableName} format, it may be helpful to include the database table
name within the variable name, as in ${Nodes.IP_Address}.
Working with Temporary Directories

The following sections provide procedures for moving Windows and SQL Server
temporary directories to optimize Orion server performance and resources.
Moving the SQL Server Temporary Directory

The SQL Server temporary directory, tempdb, where temporary database objects
generated during table creation and sorting are stored, is typically created in the
same location on your Orion database server as the master, model, and msdb
databases. Moving the tempdb database to a physical drive separate from your
Orion NPM database can significantly improve overall system performance.
For more information about moving the SQL Server 2005 temporary directory,
tempdb, for see Moving System Databases Example A: Moving the tempdb
Database.
For more information about moving the SQL Server 2008 temporary directory,
tempdb, for see Moving System Databases Example A: Moving the tempdb
Database.
Redefining Windows System Temporary Directories

Following established Windows standards, the Orion NPM installer may use
Windows User and System TEMP and TMP variable directories as temporary
scratch spaces for file expansion and execution. If you do not have the required
scratch space available in the default User or System TEMP and TMP directories,
use the following procedure to redefine your default locations.
Note: Regardless of where you actually install Orion NPM, some common files
may be installed where the operating system of your Orion server are located.
To redefine default system temporary directories:
1. Log on to your Orion server as a user with administrative rights.
2. Right-click My Computer, and then click Properties.
431

3. Click Advanced, and then click Environment Variables.
4. Select the variable name representing the directory you want to redefine,
click Edit, and then provide a new path as the Variable value for the selected temporary directory variable.

If Orion is installed on Windows Server 2008 or Windows Vista and there are any
devices on your network, between your Orion server and your database server,
that do not support RFC 1323, TCP Extensions for High Performance, the TCP
window size auto-tuning feature of Windows Server 2008 and Windows Vista
may prevent your Orion server from successfully connecting with your Orion
database. This TCP auto-tuning feature is intended as a network-sensitive
restriction, applied by the receiveryour Orion serveron the amount of data it is
allowed or able to receive. If any devices along the network path between your
Orion server and your Orion database do not support the TCP window scaling
detailed in RFC 1323, the allowed size of the TCP window in packets sent to your
Orion server may not match the TCP window size reported by packets sent from
your Orion server. This mismatch may lead to failed connections between your
Orion server and your Orion database. The following procedure disables this TCP
auto-tuning feature, resetting the TCP receive window to 64kB.
To disable tcp auto-tuning:
1. Click Start > All Programs > Accessories.
2. Right-click Command Prompt, and then click Run as administrator.
3. If you are prompted by User Account Control, click Continue to open
the elevated command prompt.
Note: In some cases, having User Account Control (UAC) enabled on Windows Server 2008 and Windows Vista (evaluation-only) can lead to installation errors. For more information about disabling UAC, see the article,
Disabling User Account Control (UAC) in the SolarWinds Knowledge
Base.
4. At the prompt, enter the following:
netsh interface tcp set global autotuninglevel=disabled
5. Close the command prompt window, and then restart your Orion server.
432
433

The SolarWinds family of products delivers easy-to-use, scalable solutions to
meet your network, systems, and storage monitoring and management needs.
The following sections provide more information about individual NPM-related
products in the SolarWinds family:
l
l
l
l
l
l
l
l
l

Managing IP Service Level Agreements (SolarWinds VoIP and Network
Quality Manager)
Monitoring NetFlow Traffic Analysis Data (Orion NTA)
Monitoring Network User Connections (User Device Tracker)

SolarWinds Server & Application Monitor (SAM) provides focused application
monitoring for network engineers, but it is much more than merely up/down status
checks and process monitoring. By allowing you to create and monitor your own
custom collection of monitored components, SAM provides an open field of
opportunity to the network engineer. With SAM you can focus monitoring on your
core services while easily ensuring application outages do not originate in the
network. SAM provides the following features to help:
l
l
l
l
Network and application service monitoring

General TCP port monitoring
WMI and SNMP process monitoring
User experience monitoring using HTTP or HTTPS content checking
Built on the proven capabilities and solid architecture of Orion NPM, you know
your current needs will be met and, as your needs grow, both the Orion platform
and the SAM module will scale with you.
434

For more information about monitoring network applications with SolarWinds
Server & Application Monitor, see the SolarWinds Orion Application Monitor
Administrator Guide at http://www.solarwinds.com/.

SolarWinds NCM extends the SolarWinds family of powerful network monitoring,
alerting, and reporting capabilities to configuration management. Network
engineers can proactively monitor their entire network infrastructure from a single
intuitive pane of glass, viewing network monitoring statistics alongside enterprisewide configuration health indicators. SolarWinds NCM can help engineers
quickly isolate network issues regardless of their origin. SolarWinds NCM
leverages Orions agentless architecture to allow network engineers themselves
to deploy and begin managing network device configurations in just minutes
without requiring expensive consultants. SolarWinds NCM continues Orions
tradition of providing easy to use software, a robust feature set, and enterprise
scalability at an affordable price point. SolarWinds NCMs scalability and
licensing flexibility allow network engineers to easily purchase and grow their
monitoring solution whether their business has only a few network devices or
thousands.
SolarWinds NCM lets users manage network configuration files from multiple
device vendors using a highly intuitive web interface. It continuously monitors
device configurations and provides notification of any configuration changes to
help you resolve problems before they impact users. SolarWinds NCM users can
quickly fix issues without requiring engineers to manually Telnet or SSH change
configuration parameters on the devices in question. SolarWinds NCM
additionally allows users to quickly check compliance reports and confirm their
devices are meeting regulatory and corporate standards. The standalone
application can integrate with Orion Network Performance Monitor (NPM) to
provide a comprehensive web-based network fault, performance, and
configuration management solution.

IP Address Manager (IPAM) leverages the intuitive point-and-click interface of the
Orion Web Console to allow you to easily investigate IP address space issues.
By periodically scanning the network for IP address changes, IPAM maintains a
dynamic list of IP addresses and allows engineers to plan for network growth,
ensure IP space usage meets corporate standards, and reduce IP conflicts. Using
435
Managing IP Service Level Agreements (SolarWinds VoIP and Network Quality

IPAM, network engineers can discover non-responsive IP addresses, coordinate
team access to your IP space, and track network changes.
Built on the enterprise Orion core, IPAM allows network engineers to create,
schedule, and share IP space reports from a single reporting engine. Finally,
network engineers can monitor network devices for fault, performance,
configuration, and now IP address health indicators.
l
l
l
l
l
Manage your entire IP infrastructure from an intuitive web console

Consolidate your IP addresses into a single repository
Update records with regular scans of your network for IP address changes
Create, schedule and share reports on the IP address space utilization
Keep network devices up by identifying and eliminating IP address conflicts
Coordinate team access to your address space with role-based access
control and track changes
Identify non-responsive IP addresses to optimize your IP space
For more information about IP Address Manager, see the SolarWinds Orion IP
Address Manager Administrator Guide at http://www.solarwinds.com/.
Managing IP Service Level Agreements

(SolarWinds VoIP and Network Quality Manager)
SolarWinds VoIP and Network Quality Manager offers an easy-to-use, scalable IP
SLA network monitoring solution that can integrate seamlessly with other
SolarWinds products on the Orion platform.
Internet Protocol Service Level Agreement (IP SLA) technology offers a costeffective and efficient response to the needs of enterprises of all sizes. As a
network manager, you face more than the simple question of whether your
network is up or down. You need to know specific quality of service
measurements for your network. VoIP and Network Quality Manager gives you
the tools to quickly test the fitness of your current network and then determine and
track quality of service on your network over time.
SolarWinds VoIP and Network Quality Manager leverages the proven
functionality of SolarWinds Network Performance Monitor (NPM) by adding IP
SLA-specific data collection and presentation tools that enable IP SLA network
monitoring and real-time status reporting. As a module of NPM, VoIP and Network
Quality Manager maintains the function of NPM while allowing you to narrow your
network management and monitoring focus to the IP SLA-capable devices of your
436

wider network. VoIP and Network Quality Manager is also available as a
standalone solution which still leverages the underlying NPM technology to
discover and monitor your nodes.
For more information about SolarWinds VoIP and Network Quality Manager, see
the SolarWinds VoIP and Network Quality Manager Administrator Guide at
http://www.solarwinds.com/.
Monitoring NetFlow Traffic Analysis Data (Orion

NTA)
Orion NetFlow Traffic Analyzer (Orion NTA) is an Orion NPM module providing
an easy-to-use, scalable network monitoring solution for IT professionals who are
juggling any size Cisco NetFlow-enabled network. NetFlow-enabled Cisco
routers and switches provide a wealth of IP-related traffic information. Orion NTA
collects this NetFlow data, correlates it into a useable format, and then provides it,
along with detailed network performance data collected by Orion NPM, as easily
read graphs and reports on bandwidth use in and to your network. These reports
help you monitor bandwidth, track conversations between internal and external
endpoints, analyze traffic, and plan bandwidth capacity needs. Orion NTA also
provides the same flow data analysis capabilities for devices using sFlow and
J-flow packets. For more information about Orion NTA, see the SolarWinds Orion
NetFlow Traffic Analyzer Administrator Guide at http://www.solarwinds.com/.
Monitoring Network User Connections (User

Device Tracker)
SolarWinds SolarWinds User Device Tracker (SolarWinds UDT) allows you to
monitor devices and ports for your network. With SolarWinds UDT, you can
analyze your port usage and capacity and be alerted to issues before they occur.
SolarWinds UDT allows you to find where devices are connected in your network
and detailed information about capacity analysis. UDT regularly polls switches
and routers for information about what is connected to them. Based on this
information, SolarWinds UDT stores current and historical information about
where a device has been connected. It also provides alerts and reports about
devices connected to the network. For capacity analysis, SolarWinds UDT can
report on how many ports are used on switches currently, as well as over time, so
you can better understand the true utilization of the ports on your switches.
437

l
SolarWinds UDT provides focused device and port monitoring for network
engineers. SolarWinds UDT provides many features to help, including:
Quickly find where a device (MAC address, hostname or IP Address) is
connected in the network
Find out where a device has been connected in the past and find out what
has been connected to a port over time
Provides port capacity analysis for a switch (how many ports are being
used, including both monitored and un-monitored ports)
Provides global port capacity analysis for used/available ports and network
capacity planning
Configure a watchlist to track when specific devices appear on the network
and alert when the devices appear
For more information about SolarWindds UDT, see the SolarWinds User Device
Tracker Administrator Guide at http://www.solarwinds.com/.

Orion Scalability Engines allow you to scale the monitoring and management
capabilities of your primary Orion installation as your enterprise network expands
and your network management needs change. For more information about using
SolarWinds scalability engines, see the SolarWinds Technical Reference,
"Scalability Engine Guidelines".
SolarWinds offers the following scalability engine options for SolarWinds NPM:
l
Distribute polling across multiple servers with Additional Polling Engines.

For more information, see Using Additional Polling Engines on page1.
Enable more users to access the Orion Web Console with Orion Additional
Web Servers. For more information, see Using an Orion Additional Web
Server on page1.
Protect against monitoring outages with the Orion Failover Engine and Hot
Standby Server. For more information, see Orion Failover and Disaster
Recovery on page1.

The Orion Additional Web Server enables remote access to the Orion Web
Console from a location other than your primary Orion server. With an Additional
Web Server installed, remote users can view the primary Orion Web Console
without deploying an entire Orion installation or excessively taxing the resources
438

of your primary SolarWinds server. The following procedure installs the Orion
Additional Web Server.
To install an Orion Additional Web Server:
1. If you downloaded the Orion Additional Web Server executable from
the SolarWinds website, navigate to your download location, and then
launch the executable.
2. If you received the Orion Additional Web Server executable on physical media, browse to the executable file, and then launch it.
Note: The executable extracts to a folder containing an HTML readme, an
Installer Guide, and Additional Web Server installers for all Orion products
that support Additional Web Servers.
3. Launch the installer that corresponds to the Orion product installed on your
primary server.
Note: To ensure full functionality if you have multiple products installed on
your main SolarWinds server, install the Additional Web Server for each
product.
4. On the Welcome window of the Compatibility Check, provide the folowing
information:
l The Hostname or IP Address of your main Orion server.
The User name and Password of a user with administrative privileges to the
Orion Web Console on your main Orion server.
5. Click Next.
6. If you are prompted to install requirements, click Install, and then complete the installation, including a reboot, if required.
Notes:
l
Downloading and installing Microsoft .NET Framework 3.5 SP1 may take
more than 20 minutes, depending on your existing system configuration.
If a reboot is required, after restart, you may need to launch the installer again. If
the installer launches automatically, click Install to resume installation, and then
click Next on the Welcome window.
8. Acccept the terms of the license agreement, and then click Next.
9. If you want to install the Orion Additional Web Server to a folder other
than the indicated default, click Browse, and then provide a different destination folder on the Choose Destination Location window.
10. Click Next on the Choose Destination Location window.
439

11. Confirm the settings on the Start Copying Files window, and then click
Next.
12. Click Finish when the Orion Network Performance Monitor Setup Wizard
completes.
13. If you are evaluating NPM, click Continue Evaluation.
14. If you are installing a production version of an NPM Additional Web
Server, click Enter Licensing Information, and then complete the following procedure to license your NPM installation:
a. If you have both an activation key and access to the internet, select
the first option, I have internet access and an activation key, enter
your Activation Key, and then click Next.
Note: If you are using a proxy server to access the internet, check I
access the internet through a proxy server, and then provide the
Proxy address and Port.
b. If you do not have access to the internet from your designated
NPM server, select This server does not have internet access,
click Next, and then complete the steps provided.
15. If the Configuration Wizard does not start automatically, click Start>
All Programs> SolarWinds Orion> Configuration and AutoDiscovery> Configuration Wizard.
16. Click Next on the Welcome tab of the Configuration Wizard.
17. Select or type the SQL Server used by your primary Orion server.
18. If you are using Windows NT Integrated Security, select Use Windows
Authentication, and then click Next.
19. If you are using a SQL Server login and password, complete the following steps:
a. Select Use SQL Server Authentication.
b. Provide your Login and Password.
c. Click Next.
20. Select or type the Database Name that is connected to your Orion server,
and then click Next.
21. If a dialog appears that says that multiple polling engines have been
detected, click OK to continue database upgrade/verification.
22. When the database structure validation completes, click Next.
23. Specify a SQL account User Name and Password for the polling engine
and web site to use to access the database, and then click Continue.
Note: If you already have a SQL account, you can specify the credentials
for that account.
24. To set up the web console, click Next on the Create Website tab, and then
complete the following procedure:
440
25.
26.
27.
28.
29.
30.
31.
32.
33.
a. Specify the IP Address of the local server on which you are installing
the new web-only interface.
b. Specify the TCP Port through which you want to access the web console.
Note: If you specify any port other than 80, you must specify that port in
the URL that is used to access the web console. For example, if you
specify an IP address of 192.168.0.3 and port 8080, your URL is
http://192.168.0.3:8080.
c. Specify the volume and folder in which you want to install the web console files, and then click Continue.
If you are asked to overwrite an existing website, click Yes.
When the new web console has been created, click Continue.
Enter the local IP address in the Address bar.
If you already have an Admin account and password, enter them in the
respective fields, and then click Login.
Note: You can log in without a password using Admin as the Account ID.
Confirm that the new Additional Web Server displays the same view for the
same account, as used both locally and on your primary Orion server.
If you intend to install either Orion NetFlow Traffic Analyzer or Server
& Application Monitor on this Orion Additional Web Server, complete
the following steps to install the required Additional Web Server components.
a. Using your SolarWinds Customer ID and Password, log in to the Customer Port at http://www.solarwinds.com/customerportal/.
b. Click Additional Components in the Customer Portal menu on the left.
c. Click Download Orion NPM Components.
If you intend to use Server & Application Monitor with this Orion Additional Web Server, complete the following steps.
a. Click Application Performance Monitor Additional Web Console
v2 in the Additional ComponentsOrion v8 and v9 section, and then
click Save.
b. Browse to an appropriate location, and then click Save.
c. When the download completes, click Open.
d. Launch the executable, and then complete the configuration wizard.
If you intend to use Orion NetFlow Traffic Analyzer with this Orion
Additional Web Server, complete the following steps.
a. Click Application NetFlow Traffic Analyzer Additional Web Consolev3 in the Additional ComponentsOrion v8 and v9 section, and
then click Save.
441

b. Browse to an appropriate location, and then click Save.
c. When the download completes, click Open.
d. Launch the executable, and then complete the configuration wizard.

Depending on the version of NPM you currently have installed, SolarWinds
provides either of two failover and disaster recovery solutions: Hot Standby
Engine and Orion Failover Engine. The Hot Standby Engine provides limited
failover protection for NPM installations older than version 10.0. For NPM version
10.0 and higher, SolarWinds offers the Orion Failover Engine, which can protect
your primary NPM installation and any installed modules.
For more information about the Orion Failover Engine, see the SolarWinds Orion
Failover Engine Administrator Guide and related documentation provided at
http://www.solarwinds.com/support/failoverengine/FailoverEngineDoc.aspx.
For more information about the Orion Hot Standby Engine, see the SolarWinds
Knolwedge Base article, "Installing, Configuring, and Testing a Hot Standby
Engine".
442
443
Index
6
64-bit counters 160
9
95th percentile calculations
configuration 186
definition 420
A
account limitations 230
creating 356
deleting 357
introduction 356
pattern 232
removing 357
viewing reports 313
Account Manager 157
accounts
editing users 228
new user 227
Web Console 157
acknowledging
events in the Web Console 249
Syslog messages in Syslog Viewer 325
Syslog messages in the Web Console 324
actions 114, 266, 329, 341
advanced alerts 259
444
change custom property 121

dial pager 279
dial SMS 279
discard message 329
discard trap 341
email a web page 120, 274
executing an external program 119, 273, 330, 342
flagging traps 341
GET/POST 124, 278
logging alerts to a file 117, 269, 329
logging alerts to NetPerfMon Event Log 271
logging alerts to Windows Event Log 117, 270, 329
logging traps to a file 341
logging traps to Windows Event Log 341
modifying Syslog message 329
paging 123
playing a sound 116, 268, 330, 342
send email/page 115, 267, 330, 342
send SNMP trap 123, 277, 330
send Windows Net messages 123, 277, 330, 342
sending syslog messages 118, 272, 329
sending traps 342
SMS 123
tag message 329
tag trap 341
text-to-speech 122, 276, 330, 342
traps 341
visual basic scripts 342
Visual Basic scripts 119, 274, 330
445
Active Directory 151

adding
advanced alert actions 266
alert actions 114
database servers 360
devices in the Web Console 201
additional pollers
configuring 149
guidelines 147
introduction 147
load balancing 150
requirements 148
upgrading 148
additional polling engines
configuring 149
guidelines 147
introduction 147
load balancing 150
requirements 148
upgrading 148
Additional Web Server 438
Additional Website 438
adjusting interface transfer rates 430
Advanced Alert Manager
Active Alerts 264
creating alerts 251-252
Current Events 263
escalation 260
monitoring period 259
446
overview 263
reset actions 260-261
reset conditions 256
settings 265
suppressions 257
time of day 259
trigger actions 259
trigger conditions 253
advanced alerts
acknowledging (Web Console) 281
actions 114, 266
adding actions 114, 266
alert trigger 253
configuration 250
configuring (Web Console) 282
creating 251-252
deleting (Web Console) 283
disabling (Web Console) 282
editing (Web Console) 282
enabling (Web Console) 282
escalated 283
escalation 260
introduction 250
managing (Web Console) 281
monitoring period 259
reset actions 260
reset conditions 256
sharing 261
suppressions 257
447
testing actions 279

time of day 259
trigger actions 259
advanced customization
Web Console settings 186
alert actions
change custom property 121
dial pager 279
discard message 329
discard trap 341
flagging traps 341
GET/POST 124, 278
logging alerts to a file 117, 269, 329
logging alerts to NetPerfMon Event Log 271
logging alerts to Windows Event Log 117, 270, 329
logging traps to a file 341
logging traps to Windows Event Log 341
modifying Syslog message 329
paging 123
playing a sound 116, 268, 330, 342
send email/page 115, 267, 330, 342
send SNMP trap 123, 277, 330
send Windows Net messages 123, 277, 330, 342
sending Syslog messages 118, 272, 329
sending traps 342
SMS 123, 279
448
tagging message 329

tagging traps 341
text-to-speech 122, 276, 330, 342
alert suppressions
advanced 257
basic 106
alert variables
advanced alert engine 389
alert-specific (basic) 399
basic alert engine 399
buffer errors (basic) 400
Date/Time (advanced) 389
date/time (basic) 400
examples (basic) 398, 408
general (advanced) 389
group (advanced) 390
interface (advanced) 415
interface errors (basic) 402
interface poller (advanced) 413
interface polling (basic) 403
interface status (basic) 403
interface traffic (basic) 403
interfaces (basic) 401
modifiers 388
node (advanced) 393
node polling (basic) 405
node statistics (basic) 405
449
node status (basic) 406

nodes (basic) 404
object types (basic) 406
SQL query (advanced) 392
status (advanced) 392
Syslog 331
Syslog (date/time) 331
Syslog (other) 332
traps 343
traps (date/time) 343
traps (other) 344
Universal Device Poller (advanced) 418
volume (advanced) 397
volume polling (basic) 407
volume statistics (basic) 407
volume status (basic) 408
volumes (basic) 407
wireless node (advanced) 419
alert variables (NPM)
advanced alert engine 412
alerts
acknowledging (Web Console) 281
actions 114, 266
adding actions 114
audible web 234
condition groups 262
configuring (Web Console) 282
custom property use case 365
deleting (Web Console) 283
450
dependent node alert suppression example 410

device failure use case 365
disabling (Web Console) 282
editing (Web Console) 282
enabling (Web Console) 282
escalated 283
escalation example 283
introduction 101, 250
load balancing failure example 411
local alert log action use case 365
log files 117, 269, 329
logging to NetPerfMon Event Log 271
logging to Windows Event Log 117, 270, 329
managing (Web Console) 281
mobile device view 287
network device failure 365
on child objects of dependencies 226
playing a sound 342
send a SNMP trap action use case 365
send a Syslog message action use case 365
suppression examples (basic) 408
testing actions 279
Universal Device Pollers 145
viewing in the Web Console 126, 280
allocation failures
charts 192
451
Antivirus software
excluded directories 50
Application Performance Monitor 434
Applications tab 153
architecture 34
assigning values
custom properties 349
audible web alerts 234
authentication
Windows 151
automatic login
DirectLink 383
introduction 380
URL pass-through 382
Windows pass-through 380
availability
calculation 244
charts 192
B
bandwidth 430
banner
configuration 185
baseline calculation 245
basic alerts
actions 107, 114
adding actions 114
alert trigger 105
configuring 102
452
copying 109
creating 104
deleting 113
editing names 104
monitored network objects 105
properties to monitor 104
suppressions 106
testing 108
time of day 106
benefits of 26
breadcrumbs 153-154
C
calculating
availability 244
baseline 245
calculation
availability 243
baseline 243
call managers
monitoring 436
capabilities of 25
charts
allocation failures 192
aspect ratio 186
availability 192
cache timeout 186
CPU load 192
453
custom 78, 190

custom chart view 193
custom node 191
custom volume 192
data export options 194
discards 78
disk usage 192
errors 78
font size 194
in the web console 78, 190
memory usage 192
multicast traffic 78-79
multiple object 193
nodes 191
objects 193
packet loss 192
percent loss 192
percent utilization 78
printing options 193
response time 192
sample intervals 194
settings in the Web Console 186
size 194
SLA line 174
time periods 194
titles 194
traffic 78-79
volume sizes 192
volumes 192
454
Cisco buffer misses threshold 77

color scheme 185
components of 34
concepts 31
condition groups 262
all 262
any 262
none 262
not all 263
Configs tab 153
configuration
web console resources 167
Configuration Wizard 54
configuring
advanced alerts 250
audible web alerts 234
basic alerts 102
Orion NPM 54
reports folders 234
web-only interface 438
counter rollover 243
counter rollovers 160
CPU load
charts 192
threshold 161
creating
alerts 104
alerts, advanced 250-252
455

custom properties filters 353
custom properties in older Orion Core versions 351
dependencies 223
escalated alerts 284
user accounts 227
credentials library
VMware 87
Custom Object Resource 181
custom poller
configuring thresholds 131
custom pollers
thresholds 139
custom properties
additional pollers 150
assigning values 349
creating a property 347
creating filters 353
Custom Property Editor 346
Custom Property Editor settings 352
deleting 350
deleting filters 354
editing 353
exporting 351
filters 353
importing data 349
introduction 346
managing 346
older Orion Core versions 351
456
removing 350
removing filters 354
settings 352
Custom Summary 181
customize
Web Console 157
customizing
Manage Nodes View 205
D
data
export charts 194
security 160, 237
database
maintenance 237
database details
in Database Manager 360
in the Web Console 159
database maintenance 364
Database Manager
adding a server 360
database details 360
editing fields 361
introduction 359
table details 361
database settings 239
definition
account limitation 356
availability 244
457
baseline 245
custom property 346
EnergyWise 90
ICMP 32
interfaces 37
MIB 33
nodes 37
Orion NPM 25
SNMP 31
SNMP credentials 32
volumes 37
deleting
dependencies 225
devices from the Web Console 206
wireless devices 100
dependencies
alerts on child objects 226
creating new 223
deleting 225
editing 224
introduction 222
devices
adding 62
adding in the Web Console 201
changing the polling method 204
deleting from the Web Console 206
458
discovery 62
importing 62
poll now 215
rediscover 215
DirectLink automatic login 383
directories
temporary 431
disaster recovery 442
discarding
syslog messages 329
traps 341
discards
charts 78
discovery 62-63
removable volumes 186
results 69
scheduled results 72
seed files 70
Discovery Central 62
Interface Discovery 63
Network Discovery 62-63
Discovery Ignore List 73
discovery settings 186
disk usage
charts 192
disk usage threshold 161
documentation 3
domain 90
dynamic groups 218
459
dynamic IP address
polling settings 239
E
editing
dependencies 224
groups 220-221
editing alert names
basic 104
editing device properties
in the web console 208
editing user accounts 228
enabling a software license key 378
Enabling SNMP
ESXi 82
EnergyWise 90
domain 90
entity 90
entity power levels 97
importance 90
keywords 91
monitoring devices 93
name 91
neighbor 92
policy level 92
power level 92
resources 93
460
Summary view 93
terminology 90
EnergyWise Level 92
EnergyWise Summary view 96
Engineers Toolset 196
entity 90
power levels 97
errors
charts 78
escalated alerts 283
creation 284
example 283
escalation
advanced alerts 260
ESX API
polling
settings 242
ESX Host Details 88
ESX Server
enabling SNMP on version 3.5 83
ESX Servers
adding 87
creating credentials 86
monitoring requirements 80
polling methods 81
ESXi
enabling SNMP 82
461
polling methods 81
event summary
adding to web console 169
events
acknowledging in the Web Console 249
viewing in the Web Console 248
Events view 248
EW Level 92
exporting
external websites 182
F
facility 333
failover 442
Failover Engine 442
features 26
fields
editing in Database Manager 361
filtering
filtering a node list resource 172
font size 186
charts 194
functional overview 34
G
GET
alerts 124, 278
462
Getting Started 156

grouping nodes in a resource 173
groups
creation 218
custom view use case 376
deleting 220
dependencies 220
dynamic 218
editing 220-221
introduction 218
nested 218
status display 221
H
help server 186
Home tab 153
HTTP 199
HTTPS
scheduled reports 311
I
ICMP 32
monitoring 34
promoting to SNMP 211
promoting to WMI 213
settings 242
icons
status 384
ignored devices 73
463
IIS
on Windows Server 2003 45
importance 90
importing
custom properties data 349
installing
Orion NPM 52
integrated remote desktop 198
Integrated Virtual Infrastructure Monitoring 80
interface
errors and discards threshold 77
percent utilization threshold 77
status rollup 186
transfer rates 430
interfaces
adding 63
adding multiple 62
definition 37
discovery 62-63
editing properties in the web console 208
importing 63
poll now 215
polling intervals 238
polling statistics intervals 238
464
unpluggable 208
viewing resources in the web console 214
introduction 25
IP Address Manager 435
IP SLA Manager 436
IPv4
IPv6
IVIM 80
L
license
deactivating 51
details 159
key 378
maintenance 51
sizing 37-38
License Manager 51
installing 51
using 51
licensing 37
levels 37
with other products 38
limitations
account 230
pattern 232
List Resources 214
465
load balancing
additional polling engines 150
logging
alerts to a file 117, 269, 329
alerts to NetPerfMon Event Log 271
alerts to Windows Event Log 117, 270, 329
traps to a file 341
traps to Windows Event Log 341
logging in
web console 76
M
maintaining a database 364
manage nodes 214
Manage Nodes View
customizing 205
Management Studio 362
managing
device configurations 435
IP addresses 435
network configurations 435
map cache timeout 186
maps 127
list resource 168
objects list resource 168
memory swapping 216
466
memory usage
charts 192
menu bars
account defaults 232
custom 183
Message Center 180
MIB 33
mobile devices
acknowledging alerts 287
viewing alerts 287
modifying syslog messages 329
modules
IP SLA Manager 436
NetFlow Traffic Analyzer 437
Server & Application Monitor 434
SolarWinds UDT 437
VoIP and Network Quality Manager 436
VoIP Monitor 436
monitored network objects
basic alerts 105
monitoring
applications 434
call managers 436
capabilities 25
IP service level agreements 436
memory 216
NetFlow 437
467
network connections 437

network users 437
period (advanced alerts) 259
QoS 436
traffic 437
VoIP networks 436
wireless networks 99
multicast traffic
charts 78-79
N
neighbor 92
Net messages 123, 277, 330, 342
NetFlow
monitoring 34
NetPerfMon
Event Log alerts 271
Network Atlas 127
Network Configuration Manager 435
Network Discovery
getting started 63
ignored results 73
introduction 62
results 69
scheduled results 72
seed files 70
468
network settings 242

Network tab 153
networking
concepts 31
terminology 31
node
status rollup 186
node maintenance mode 216
node management
in the Web Console 201
poll now 215
rediscover 215
states 214
Web Console administration 156
node warning interval 245
nodes
adding 62
adding multiple 62
availability 244
changing polling engine assignments 150
changing the polling method 204
custom charts 191
definition 37
discovery 62
editing properties in the web console 208
filtering a resource list 172
grouping in a resource 173
469
importing 62
poll now 215
rediscover 215
NotePage 279
NotePager Pro 279
notification bar 152
O
Orion
Additional Web Server 438
Additional Website 438
Failover Engine 442
IP SLA Manager 436
Network Atlas 127
Network Configuration Manager 435
scalability engines 438
VoIP Monitor 436
Web Console 76
Wireless 99
Orion NPM
License Manager 51
470
thwack.com integration 26
Orion Polling Settings 237
Orion Report Scheduler 310
troubleshooting 312
Orion Web Console 76, 151
Orion Website Accounts 157
overview
functional 34
P
packet loss
calculation 162
charts 192
packet loss reporting 246
page refresh 186
paging
alerts 279
paging action 123
pattern limitations 232
percent loss
charts 192
percent memory used threshold 162
percent packet loss threshold 162
percent utilization
charts 78
playing a sound 116, 268, 330, 342
policy level 92
poll ESX server directly 89
poll now 215
471
poller remotability 147

pollers
configuration 237
settings 237
stackable 147
polling engines
changing node assignments 150
configuration 237
details 159
management 237
settings 237
web console view 237
polling intervals
response time 238
status 238
polling settings
dynamic IP address 239
IPv4 239
IPv6 239
node warning interval 245
packet loss reporting 246
polling through 89
POST
alerts 124, 278
power levels 97
printing
charts 193
472
product updates
downloading 186
viewing 185
promoting nodes from ICMP to SNMP 211
promoting nodes from ICMP to WMI 213
R
realtime change detection 330, 342
rediscovery 215
regular expressions
alternation 426
anchors 423
character sets/classes 422
characters 422
dot 426
eamples 426
pattern matching 422
quantifiers 424
word boundaries 426
remote access
HTTP 199
SSH 199
Telnet 199
remote desktop 198
removable volumes
discovery 186
removing
473

wireless devices 100
report cache timeout 186
reports
adding content 299
adding custom chart 300
adding custom table 302
alerts 290
availability 288, 290
business hours use case 374
CPU 291
creating a report 305
creating in the web console 295
creating new web-based 297
current groups and groups members 292
design mode 305
device types 294
disk space 294
down events 290
down nodes 289
emailing use case 374
events 290
field formatting options 309
field options 306
filter results options 307
folder 234
footers 309
474
general options 305

getting started 304
group availability 293
group availability with members 293
group member status 292
group status 292
grouping options 308
groups and group member status 292
headers 309
historical groups status 293
interface bandwidth 294
interface types 294
inventory 294
IOS versions 294
last 250 events 290
list resource 172
modifying a report 305
modifying web-based reports 296
node response time 289
node status 289
predefined 288
preview mode 304
Report Writer example 314
response time 291
scheduling 310
scheduling use case 374
SQL query 314
summarization options 308
time frame options 308
475
top XX records options 307

virtual machine CPU utilization 292
virtual machine memory utilization 292
virtual machine running time 292
virtual machine traffic 292
VMware ESX Server 292
volume status 290
volume usage 294
volumes 294
web console 295
Reports
view 294
requirements 38
CLR types 44
monitored devices 44
Orion database server 41
Orion server hardware 41
Orion server software 39
SNMP monitoring 44
SQL Server Management Objects 44
SQL Server Native Client 44
virtual machines 43
virtual servers 43
VMware Servers 44
x86 components 44
reset
actions (advanced alerts) 260
conditions (advanced alerts) 256
476
resources
configuration 167
custom HTML 170
Custom Object 181
custom text 170
EnergyWise 93
event summary 169
map objects list 168
maps 167
maps list 168
reports 171
reports list 172
Syslog 322
user-defined links 169
response
calculation 162
response time
charts 192
threshold 162
rollover 160
S
sample intervals
adjust 194
scalability 438
scalability engines
guidelines 147
scaling Orion 438
477
scenarios 365
scheduled discovery
ignored results 73
managing results 72
scheduling node maintenance 216
secure sockets layer 47
Orion Web Console 49
requiring 50
security of data 160, 237
seed files 70
sending
email/page 115, 267, 330, 342
SNMP trap 123, 277, 330
syslog messages 118, 272, 329
traps 342
service level agreement
chart line 174
services 34
session timeout 186
setting
pattern account limitations 232
settings
charts 186
478
discovery 186
Web Console 158
website 186
severity 334
sharing
advanced alerts 261
site login text 186
site logo
configuration 185
URL 186
sizing
database 37
network 37
SMS
alerts 279
SMS action 123
SNMP 31
ESX Server version 3.5 83
monitoring 34
settings 242
SNMP credentials 32
snmp traps 336
software license key 378
SolarWinds
User Device Tracker 437
spoofing network packets 330
479
SQL
query as a variable 392
Server Management Studio 362
variables 392
SQL Server
tempdb 431
SSH 199
SSL 47
alert email 267
Orion Web Console 49
requiring 50
stackable pollers 147
status
groups 221
status icons 384
status indicators 384
status rollup 186
Status Rollup Mode 385
status variables 392
subviews 175
adding 176
copying 179
deleting 180
editing 178
using 175
summarization 364
480
suppression
advanced alerts 257
suppression examples
basic alerts 408
dependent node alert 410
load balancing failure alert 411
suppressions
basic alerts 106
Syslog
acknowledging messages in Syslog Viewer 325
acknowledging messages in the Web Console 322, 324
alert actions 329
alert variables 331
alerts 118, 272, 327, 329
daemons 333
facility 333
filters 327
forwarding messages 330
messages in the Web Console 322
monitoring 34, 321
port configuration 322
priority value 333
processes 333
resources 322
searching messages 325
server settings 326
severity 334
view 323
viewing messages in Syslog Viewer 325
481
viewing messages in the Web Console 323

T
tables
details 361
tabs 153
tagging
syslog messages 329
traps 341
Telnet 199
TEMP 431
tempdb 431
terminology 31
EnergyWise 90
EnergyWise domain 90
EnergyWise entity 90
EnergyWise importance 90
EnergyWise keywords 91
EnergyWise name 91
EnergyWise neighbor 92
EnergyWise policy level 92
EnergyWise power level 92
testing
alert actions 279
text-to-speech 122, 276, 330, 342
threshods
custom pollers 139
482
thresholds 76, 161, 243

Cisco buffer misses 77
configuration 77, 163
CPU load 161
custom poller 131
disk usage 161
interface errors and discards 77
interface percent utilization 77
percent memory used 162
percent packet loss 162
response time 162
thumbnail aspect ratio 186
thwack.com 26
time of day
advanced alerts 259
time periods
charts 194
TLS
alert email 267
TMP 431
Toolset integration 196
adding programs 197
configuration 197
installation 196
traffic
charts 78-79
Trap Viewer 337
settings 338
483
traps
alert actions 123, 277, 330, 339
alert variables 343
alerts 339, 342
alerts actions 341
community string 339
conditions 339
defined 336
DNS hostname 339
email/page 342
executing an external program 342
filters 339
log files 341
logging to Windows Event Log 341
playing a sound 342
port 337
protocol 336
searching 338
text-to-speech 342
time of day 339
Trap Viewer configuration 337
Trap Viewer settings 338
trigger thresholds 339
viewing 337
viewing in the Web Console 337
Traps
view 337
484
trigger actions
advanced alerts 259
trigger conditions
advanced alerts 253
troubleshooting 429
Orion Report Scheduler 312
temporary directories 431
variables 431
Windows Server 2008 performance 432
Windows Vista performance 432
U
adding resources to the Web Console 144
alerts 145
assigning devices 135
configuring thresholds 131
copying 137
creating a poller 131
creating transformations 141
disabling 136
duplicating 137
exporting 139
importing 137
introduction 129
maps 145
Network Atlas 145
suspending 136
thresholds 139
485
transformations 140
transforming 140
viewing statistics 144
unmanage nodes 214
unplugged interfaces 208
upgrading
evaluation license 59
Orion NPM 57
URL pass-through automatic login 382
use case
business hours report 374
creating an alert using a custom property 368
custom property alert 365
custom property for an alert 365
custom views 376
device failure alert 365
emailed report 374
groups 376
local alert log action 365
scheduled report 374
send a Syslog message action 365
send an SNMP trap action 365
use cases 365
user-defined links 169
user accounts
access settings 229
creating 227
editing 228
limitations 230
486
menu bars 232

pattern limitations 232
reports folder 234
views 232
User Device Tracker 437
V
variables
advanced alerts 389
alert-specific (basic alerts) 399
basic alerts 388, 399
buffer errors (basic alerts) 400
Date/Time (advanced alerts) 389
date/time (basic alerts) 400
examples (basic alerts) 398, 408
full names 431
general (advanced alerts) 389
group (advanced alerts) 390
interface (advanced alerts) 415
interface errors (basic alerts) 402
interface poller (advanced alerts) 413
interface polling (basic alerts) 403
interface status (basic alerts) 403
interface traffic (basic alerts) 403
interfaces (basic alerts) 401
introduction 388
node (advanced alerts) 393
node polling (basic alerts) 405
node statistics (basic alerts) 405
487
node status (basic alerts) 406

nodes (basic alerts) 404
object types (basic alerts) 406
SQL query (advanced alerts) 392
status (advanced alerts) 392
Syslog alerts 331
Syslog alerts (date/time) 331
Syslog alerts (other) 332
trap alerts 343
trap alerts (date/time) 343
trap alerts (other) 344
Universal Device Poller (advanced alerts) 418
volume (advanced alerts) 397
volume polling (basic alerts) 407
volume statistics (basic alerts) 407
volume status (basic alerts) 408
volumes (basic alerts) 407
wireless node (advanced alerts) 419
variables (NPM)
advanced alerts 412
vCenter 89
viewing
alerts (Web Console) 126, 280
device resources (Web Console) 214
events (Web Console) 248
Syslog messages (Web Console) 323
traps (Web Console) 337
viewing events
alerts triggered 180
488
audit events 180

event messages 180
syslog messages 180
traps received 180
views
adding EnergyWise Summary 96
adding subviews 176
Alerts 126, 280
by device type 166
copying 166
copying subviews 179
creating 163
Custom Summary 181
customizing 163
deleting 166
deleting subviews 180
device groups use case 376
editing 164
editing subviews 178
EnergyWise Summary 93
exporting to PDF 181
menu bars 183
Message Center 180
Orion Poller Settings 237
Orion Website Accounts 157
product updates 185
Reports 294
subviews 175
489
Syslog 323
Traps 337
using subviews 175
Virtualization Summary 88
Web Console 158
Virtualization Summary 88
Virtualization tab 153
vMotion 80
VMware
adding ESX Servers 87
credentials library 87
VMware tools 88
VMware Tools 44
VoIP Monitor 436
volume
status rollup 186
volumes
adding 62
adding multiple 62
custom charts 192
definition 37
discovery 62
importing 62
490

size charts 192
W
web-only interface
configuration 438
installation 438
web console 76, 151
adding subviews 176
breadcrumbs 154
configuring resources 167
copying subviews 179
deleting subviews 180
editing subviews 178
log in 76
navigation 153
notification bar 152
subviews 175
tabs 153
using subviews 175
Web Console
Account Manager 157
accounts 157
acknowledging alerts 281
Active Directory 151
adding a map 167
adding an SLA chart line 174
491
adding devices 201

adding interfaces 201
adding nodes 201
adding volumes 201
Admin login 151
administration 156
Alerts view 126, 280
banner 185
changing passwords 155
charts 78, 190
color scheme 185
configuring alerts 282
configuring product updates 185
copying views 166
creating accounts 227
creating views 163
custom HTML 170
custom text 170
customization 157
customizing 183
data security 160, 237
database details 159
deleting alerts 283
deleting devices 206
deleting interfaces 206
deleting nodes 206
deleting views 166
deleting volumes 206
disabling alerts 282
492
downloading product updates 186

editing accounts 228
editing alerts 282
editing device properties 208
editing views 164
enabling alerts 282
event summary resource 169
Events view 248
exporting views to PDF 181
external websites 182
filtering a node list resource 172
getting started 156
grouping nodes in a resource 173
icons 384
interface tooltips 207
license details 159
login 151
managing alerts 281
map objects list resource 168
maps list resource 168
menu bars 183
Message Center 180
node management 156, 201
node management states 214
node tooltips 207
poll now 215
polling engines 237
polling engines details 159
promoting nodes from ICMP to SNMP 211
493
promoting nodes from ICMP to WMI 213

rediscover 215
Reports 294
reports list resource 172
reports resource 171
settings 158, 186
site logo 185
Syslog 322
thresholds 76, 161
Toolset integration 196
Traps 337
Universal Device Poller resources 144
user-defined links resource 169
view customization 163
viewing alerts 126, 280
viewing device resources 214
viewing poller statistics 144
views 158
Views by Device Type 166
Windows Authentication 151
web node management 201
website settings 186
Windows
Event Log alerts 117, 270, 329, 341
memory 216
Net messages 123, 277, 330, 342
pass-through automatic login 380
Windows Authentication 151
494
Windows Server 2008

slow performance 432
Windows Vista
slow performance 432
Wireless Networks
getting started 99
introduction 99
migrating historical data 99
removing devices 100
viewing data 100
495

OrionNPMAdministratorGuide PDF

Uploaded by

Copyright:

Available Formats

OrionNPMAdministratorGuide PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

OrionNPMAdministratorGuide PDF

Uploaded by

Copyright:

Available Formats

Copyright 1995-2014 SolarWinds Worldwide, LLC.

All rights reserved

SolarWinds Orion Network Performance Monitor

Network Performance Monitor Administrator Guide

SolarWinds Orion Network Performance Monitor Documentation Library

Why Install SolarWinds NPM

Benefits of Orion Network Performance Monitor

Key Features of SolarWinds NPM

Networking Concepts and Terminology

Simple Network Management Protocol (SNMP)

Internet Control Message Protocol (ICMP)

Management Information Base (MIB)

Windows Management Instrumentation (WMI)

How Orion Network Performance Monitor Works

Chapter 2: Installing SolarWinds Orion Network Performance Monitor

NPM Licensing Levels

Licensing NPM with Other SolarWinds Products

Orion NPM Requirements

Orion Server Software Requirements

Orion Server Hardware Requirements

Requirements for the Orion Database Server (SQL Server)

Requirements for Virtual Machines and Servers

Additional Required Components

SNMP Requirements for Monitored Devices

Enabling Microsoft Internet Information Services (IIS)

Enabling IIS on Windows Server 2003

Enabling IIS on Windows Server 2008

Enabling IIS on Windows Server 2012

Enabling and Requiring Secure Channels with SSL

Enabling SSL Connections on Windows Server 2003

Enabling SSL Connections on Windows Server 2008

Enabling SSL Connections on Windows Server 2012

Configuring the Orion Web Console for SSL

Configuring the Web Console to Require SSL

Antivirus Directory Exclusions

Windows Server 2003 and Windows XP:

Windows Server 2007, Windows Vista, and Windows 2008

Maintaining Licenses with License Manager

Installing License Manager

Using License Manager

Installing Orion Network Performance Monitor

Completing an Orion NPM Installation

Completing the Orion Configuration Wizard

Upgrading Orion Network Performance Monitor

Upgrading an Evaluation License

Chapter 3: Discovering and Adding Network Devices

Network Discovery Using the Network Sonar Wizard

Using the Network Sonar Results Wizard

Importing a List of Nodes Using a Seed File

Managing Scheduled Discovery Results

Using the Discovery Ignore List

Downloading the SolarWinds MIB Database

Chapter 4: Managing Orion NPM in the Web Console

Logging in to the Orion Web Console

Orion Network Performance Monitor Thresholds

Network Performance Monitor Threshold Types

Setting Network Performance Monitor Thresholds

Custom NPM Interface Charts

Discards and Errors Charts