Canam Multi Story Building

MULTI-STORY
DESIGN-BUILD SOLUTIONS
Table of Contents

Introduction to Canam................................................................................................................ 3
BuildMaster Design-Build Approach ......................................................................................... 3
Steel Framing and Decking.......................................................................................................... 4
Load-Bearing Murox Panel Exterior Finish Shop-Installed ....................................................... 5
Load-Bearing Murox Panel Exterior Finish Field Applied ......................................................... 7
Superimposed Load-Bearing Murox Panel.................................................................................. 9
Whats in it for You? ................................................................................................................. 10

2 |
CANAM | MULTI-STORY BUILDINGS
Introduction to Canam
Canam, a business unit of Canam Group Inc., specializes in the fabrication of steel joists, joist
girders and steel deck. The business unit also designs, fabricates and installs the building
system. The safer, faster and greener BuildMaster approach completes Canams range of
customized solutions and services.

BuildMaster Design-Build Approach

BuildMaster is a completely new and innovative approach to planning, constructing and
operating a new building.
BuildMaster combines Canams extensive experience in the construction business with the
latest advances in technology to deliver a level of management and connectivity never before
possible across the entire construction spectrum. There are significant benefits for erectors,
fabricators, general contractors, architects, engineers and owners since BuildMaster is
designed to make the entire building process safer, faster and greener.
Canam has traditionally offered the Murox system for light industrial, commercial and
institutional buildings. Today, Canam has developed a new application for Murox panels: multi-
story buildings (3 to 6 stories).
Canam has successfully designed, fabricated and erected 2 multi-story buildings in 2010, one
with 3 floors and a second with 4 floors with each using load-bearing Murox panels and the
BuildMaster approach.
The following pages describe the various advantages of building multi-story buildings with
Canam products.
| 3
Steel Framing and Decking

Using the BuildMaster approach, Canam will complete the design, fabrication and erection of
the structural steel, steel joists and deck as shown for the multi-story buildings in Figures 1 to 6.
This approach will allow the owner to:
attain a more aggressive schedule for the fabrication and installation of the steel
structure which will shorten the overall construction process and allow for earlier
occupancy.
have the BuildMaster insurance policy guaranteed start and completion dates.
Canam can also work as a partner with the engineer and architect of the project by assisting in
the design process.
FIGURE 1 | Domaine Beauceville Perspective
FIGURE 2 | Heritage Gardens Elevation

4 |

Load-Bearing Murox Panel Exterior Finish Shop-Installed
In addition to the structural steel, Canam can also incorporate the Murox load-bearing panel
system for the exterior wall envelope. The Murox panels:
are designed, delivered and erected by the Canam team using the BuildMaster
approach.
can have a variety of exterior and interior wall finishes shop-installed.
can provide framed openings with windows and doors also shop-installed.
In addition to the benefits of the Canam design-build solution, Murox panels provide additional
benefits of:
a rapidly enclosed, insulated, exterior envelope allowing subsequent trades to start

earlier in the building interior fast tracking the construction process.
finishes walls in place at the same time as the steel structure.
installation time savings of at least 50% on the structure and exterior envelope.

FIGURE 3 | Processing Centre Elevation
A 4-story building using Murox load-
bearing panels. The design-build
contractor elected to install the
windows on site.
| 5

FIGURE 4 | Processing Centre Perspective
Horizontal corrugated finishes, vertical reveals
and windows are all shop-installed. Orange
coloured corners were built on site by the design-
build contractor.

FIGURE 5 | Processing Centre Detail
A variety of shop-installed finishes were used on
the building to create a unique look and optimize
efficiency of the pre-fabrication.

FIGURE 6 | Processing Centre Typical floor plan
Each load-bearing Murox panel, identified with a
number inside a triangle, is shipped in erection
sequence. No columns on the floor periphery
maximizes open space on exterior walls.

6 |
Load-Bearing Murox Panel - Exterior Finish Field Applied

The Murox panels can also be delivered without any finishes shop-installed. This option allows
the client to install special finishes on site that cannot be pre-installed in the Canam plant.
The benefits of the Canam design-build solution with load-bearing Murox panels allows for:
the possibility of high end architectural finishes installed on site.
impressive savings on total structure and exterior envelope installation times.

FIGURE 7 | SIQ Building Vertical Wall
SectionConstruction detail with load-bearing Murox
panels showing intermediate floor. Channels
attached at every panel joint can support
intermediate floors.

FIGURE 8 | SIQ Building Elevation
Each load-bearing Murox panel,
identified with a number inside
a triangle, is shipped in erection
sequence. Windows are shop-
installed in Canam plant.
| 7

FIGURE 9 | SIQ Building Perspective
Load-bearing Murox panels finished on air
barrier ready to receive aluminum finish on
site by design-build contractor.

FIGURE 10 | SIQ Building Lobby Area
The Murox structural columns boxed in
plywood at ground floor level.

FIGURE 11 | SIQ Building Elevation
On-site, a variety of high-end finishes
installed, were used on the building to create
a unique look that does not necessarily show
the modularity of the load-bearing Murox
panels.

8 |
Superimposed Load-Bearing Murox Panel

Another solution to achieve a multi-story building is to stack the load bearing Murox panels.
Two panels can be stacked one on top of the other to create a multi-story building. Up to a 4-
story building has been constructed this way to date.
This solution can be used in a situation where the owner requires the possibility of a vertical
future expansion. The bottom panels and structural steel need to be plumbed and the deck
welded on each lower floor before starting the installation of the upper components.
Refer to Figure 14 for the wall section of a 2-story building constructed in 2004 where a second
level of load bearing panels was added in 2007 to provide the 3rd and 4th stories for a total
height of 54-3. Since no bracing is used in the Murox panels in this configuration, conventional
bracing is needed for lateral stability.

FIGURE 12 | Desjardins Bank
The building as completed in 2004,
with two stories of load bearing
Murox panels.

FIGURE 13 | Desjardins Bank
The 3rd and 4th floors added in 2007.

| 9

FIGURE 14 | Desjardins Bank Vertical Wall Section
The lower (1st and 2nd floors) Murox panel and
upper (3rd and 4th floors) Murox panel are
connected without additional structural
components at the joint (as highlighted). The
top of the lower panel, which was the parapet
in the original 2-story building, is now used as
the sill of the window of the upper panel.

Whats in it for You?
Selecting the appropriate solution for your multi-story office project will assure,
guaranteed adherence to the budget and schedule.
earlier revenue generation from your investment.
reduced financing costs through fast tracking of the construction process.

Contact your local Canam representative today to find out how we can help you.

A division of Canam Group
CANAM
Administrative office and main sales office
270, Chemin Du Tremblay, Boucherville (Qubec) J4B 5X9
Telephone: 450-641-4000 | Fax: 450-641-9585
1-866-466-8769 | www.canam-construction.com

10 |

Canam Multi Story Building

Uploaded by

Copyright:

Available Formats

Canam Multi Story Building

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Canam Multi Story Building

Uploaded by

Copyright:

Available Formats

MULTI-STORY

CANAM | MULTI-STORY BUILDINGS

BuildMaster Design-Build Approach

CANAM | MULTI-STORY BUILDINGS

Steel Framing and Decking

FIGURE 1 | Domaine Beauceville Perspective

FIGURE 2 | Heritage Gardens Elevation

CANAM | MULTI-STORY BUILDINGS

can have a variety of exterior and interior wall finishes shop-installed.

a rapidly enclosed, insulated, exterior envelope allowing subsequent trades to start

finishes walls in place at the same time as the steel structure.

CANAM | MULTI-STORY BUILDINGS

CANAM | MULTI-STORY BUILDINGS

Load-Bearing Murox Panel - Exterior Finish Field Applied

the possibility of high end architectural finishes installed on site.

impressive savings on total structure and exterior envelope installation times.

CANAM | MULTI-STORY BUILDINGS

CANAM | MULTI-STORY BUILDINGS

Superimposed Load-Bearing Murox Panel

CANAM | MULTI-STORY BUILDINGS

CANAM | MULTI-STORY BUILDINGS

You might also like