Electrochemistry

SECTION 1 : STRAIGHT OBJECTIVE TYPE

1.1

The E in the given diagram is,

(A) 0.5
(B) 0.6
(D) 0.8

(C) 0.7

1.2

What is cell entropy change of the following cell?

Pt(s) | H2(g) | CH3COOH, HCl || KCl (aq) |Hg2Cl2| (s) | Hg
P = 1 atm
0.1M
0.1M
Emf of the cell is found to be 0.045 V at 298 K and temperature coefficient is
3.4 10 4 V K 1
Given Ka (CH3COOH) = 10 5 M
(A) 60
(B) 65.2
(C) 69.2
(D) 63.5

1.3

Following cell has EMF 0.7995 V.

Pt | H2 (1 atm) | HNO3 (1M) || AgNO3 (1M) | Ag
If we add enough KCl to the Ag cell so that the final Cl- is 1M. Now the
measured emf of the cell is 0.222 V.
The Ksp of AgCl would be :
(A) 1 10 9.8
(B) 1 10 19.6
(C) 2 10 10
(D)
14
2.64 10

1.4

Zn Amalgam is prepared by electrolysis is aqueous ZnCl2 using Hg cathode

(9gm). How much current is to be passed through ZnCl2 solution for 1000
seconds to prepare a Zn Amalgam with 25% Zn by wt. (Zn = 65.4)
(A) 5.6 amp
(B) 7.2 amp
(C) 8.85 amp
(D) 11.2 amp

1.5

The solubility of [Co(NH3)4Cl2] CIO4_________ if the Co(NH ) Cl = 50, CIO =

3 4

70, and the measured resistance was 33.5 in a cell with cell constant of
0.20 is ____.
(A) 59.7 mmol/L
(B) 49.7 mmol/L
(C) 39.7 mmol/L
(D) 29.7 mmol/L
1.6

We have taken a saturated solution of AgBr.Ksp of AgBr is 12 10 14 . If 10

7
mole of AgNO3 are added to 1 litre of this solution then the conductivity of
this solution in terms of 10 7 Sm 1 units will be
[Given (Ag ) = 4 10 3 Sm2 mol 1 (Br ) = 6 10 3 Sm2 mol 1,
5 10 3Sm2mol-1]
(A) 39
(B) 55

(C) 15

(D) 41

1.7

At 298K the standard free energy of formation of H2O( ) is 237.20kJ/mole

while that of its ionisation into H+ iion and hydroxyl ions is 80 kJ/mole, then
the emf of the following cell at 298 K will be
H2(g,1 bar) | H+ (1M) || OH (1M) | O2 (g, 1bar)
(A) 0.40 V
(B) 0.81 V
(C) 1.23 V
(D) 0.40 V

1.8

Which of the following cell can produce more electric work.

(A) pt,H2|NH4Cl||0.1MCH3COOH|H2,pt (B) pt,H2|0.1MHCl||0.1MNaOH|H2,pt
(C) pt,H2|0.1MHCl||0.1MCH3COOK|H2,pt(D)
pt,H2|0.1MCH3COOK||0.1MHCl|H2,pt

1.9

A hydrogen electrodes is immersed in a solution with pH = 0 (HCl). By how

much will the potential (reduction) change if an equivalent amount of NaOH is
added to the solution. (Take PH2 = 1 atm) T = 298 K.
(A) increase by 0.41V (B)increase by 50mV (C)decrease by 0.41V
(D)decrease by 59mV

1.10

At what

1.11

Calculate the EMF of the cell at 298 K

Pt|H2(1atm)|NaOH(xM),NaCl(xM)|AgCl(s)|Ag
If Ecl-/AgCl/Ag = + 0.222 V
(A) 1.048 V
(B) 0.04 V
(C) 0.604
(D) Emf depends on x and cannot be determined unless value of x is given

1.12

A current of 0.1A was passed for 2hr through a solution cuprocyanide and
0.3745g f copper was deposited on the cathode. Calculate the current
efficiency for the copper deposition.
(A) 79%
(B) 39.5%
(C) 63.25%
(D) 63.5%

1.13

With t taken in seconds and I taken in Amp, the variation of I follows the
equation
t2 + I2 = 25
what amount of Ag will be electrodeposited with this current flowing in the
interval 0-5 second ? (Ag : 108)
(A) 22mg
(B) 66mg
(C) 77mg
(D) 88mg

1.14

The following cell has a potential of 0.55 V at 25C

Pt(s) | H2(1atm)| H+ (? M) || Cl- (1M)| Hg2Cl2(s)| Hg( )
What is the pH of the solution in the anodic chamber? E Cl-/Hg2Cl2/Hg = 0.28 V
(A) 4.57
(B) 14.07
(C) 9.15
(D) 7.15

[Br - ]

does the following cell have its reaction at equilibrium?

[CO32 ]
Ag(s) | Ag2CO3(s) | Na2CO3 (aq) || KBr(aq) | AgBr(s) | Ag(s)
KSP = 8 10 12 for Ag2CO3 and KSP = 4 10 13 for AgBr
(A) 1 10 7
(B) 2 10 7
(C) 3 10 7
(D) 4 10 7

1.15

A resistance of 50 is registered when two electrodes are suspended into a

beaker containing a dilute solution of a strong electrolyte such that exactly
half of the them are submerged into solution. If the solution is diluted by
adding pure water (negligible conductivity) so as to just completely submerge
the electrodes, the new resistance offered by the solution would be
(A) 50
(B) 100
(C) 25
(D) 200

1.16

The standard reduction potential of a silver chloride electrode is 0.2 V and that
of a silver electrode is 0.79 V. The maximum amount of AgCl that can
dissolve in 106 L of a 0.1 M AgNO3 solution is
(A) 0.5 mmol
(B) 1.0 mmol
(C) 2.0 mmol
(D) 2.5 mmol

1.17

Calculate the cell EMF in mV for

Pt|H2(1atm) |HCl(0.01M)|AgCl(s)| Ag(s) at 298 K
If Gr values are at 25C
kJ
kJ
- 109.56
for Agcl(s) and 130.79
for (H+ + Cl-) (aq)
mol
mol
(A) 456 mV
(B) 654 mV
(C) 546 mV
(D)
None
these.

of

1.18

Adiponitrile is manufactured electrolytically from acrylonitrile

CH2 = CHCN
CN (CH2)4 CN
How many kg of adiponitrile (molecular mass = 108) is produced in 9.65 hr
using a current of 3750 A with 80% efficiency/
(A) 30 kg
(B) 58 kg
(C) 60 kg
(D) 80 kg

1.19

It is observed that the voltage of a galvanic cell using the reaction M(s) +
x
xH+
Mx+ + H2 varies linearly with the log of the square root of the
2
hydrogen pressure and the cube root of the Mx+ concentration. The value of x
is
(A) 2
(B) 3
(C) 4
(D) 5

1.20

During the electrolysis of 0.1 M CuSO4 solution using copper electrodes, a

depletion of [Cu++] occurs near the cathode with a corresponding excess near
the anode, owing t inefficient stirring of the solution. If the local concentrations
of [Cu++] near the anode & cathode are respectively 0.12 M & 0.08 M,
calculate the back e.m.f. developed. Temperature = 298 K.
(A) 22 mV
(B) 5.2 mV
(C) 29 mV
(D) 59 mV

1.21

Acetic acid has Ka = 1.8 10 5 while formic acid had Ka = 2.1 104. What
would be the magnitude of the emf of the cell
0.1M acetic acid 0.1M formic acid
Pt(H2)
Pt(H2) at 25C
0.1M sodium acetate 0.1M sodium formate
(A) 0.0315 volt
(B) 0.0629 volt
(C) 0.0455 volt
(D) 0.0545 volt

1.22

Consider the cell Ag(s)|AgBr(s)|Br-(aq)||AgCl(s)|Cl-(aq)|Ag(s) at 25C. The

solubility product constants of AgBr & AgCl are respectively 5 10 13 & 1
10 10. For what ratio of the concentrations of Br- & Cl- ions would the emf of
the cell be zero ?
(A) 1 : 2000
(B) 1 : 100
(C) 1 : 500
(D) 200 : 1

1.23

Value of m for SrCl2 in water at 25C from the following data:

Conc. (mol/lt)
0.25
1
-1
2
-1
m ( cm mol ) 260
250
(A) 270
(B) 260
(C) 250
(D) 255

1.24

Calculate the useful work of the reaction Ag(s) + 1/2Cl2(g)

AgCl(s)
Given Ecl2/cl- = + 1.36 V, EAgCl/Ag,Cl- = 0.22 V
If
Pcl2 = 1 atm and T = 298 K
(A) 110 kJ/mol
(B) 220 kJ/mol
(C) 55kJ/mol
(D) 1000 kJ/mol

1.25

Which of these ions Cu+, Co3+, Fe2+ is stable in aqueous medium.

Given :
ECu2+/Cu+ = 0.15 volt ;
ECu+/Cu = 0.53 V ; ECo3+/Co2+ = 1.82
V;
EFe3+/Fe2+ = 0.77 V ; EFe2+Fe = - 0.44 V ; EO2,H+/H2O = 1.23 V
+
(A) Cu , Co3+
(B) Co3+
(C) Cu+
(D) Co3+, Cu+
2+
,Fe

1.26

Select the correct statement if EMg2+/Mg = - 2.4V, ESn4+/Sn2+ = 0.1 V, EMnO4-,H+/Mn2+ = 1.5 V, E I2/I- = 0.5 V
Here,
(A) MnO4 is the strongest Oxidizing Agent and Mg is the strongest Reducing
Agent.
(B) Sn4+ + 2I-
Sn2+ + I2 is a spontaneous reaction.
(C) Mg2+ + Sn2+
Mg + Sn4+ is a spontaneous reaction.
(D) Here, Weakest oxidizing agent is Sn4+ and weakest reducing agent is
Mn2+.

1.27

What is the value of pKb (CH3COOH-) if m = 390 & m = 7.8 for 0.04 of a
CH3COOH at 25C
(A) 9.3
(B) 9.2
(C) 4.7
(D) 4.8

1.28

The temperature coefficient of a standard Cd-cell is 5.0 10 5 Vk 1 whose

emf at 25C is 1.018 V. During the cell operation, the temperature will (A) increase
(B) decrease
(C) either
(D)
remains
constant

1.29

A cell Ag | Ag+ || Cu++ | Cu initially contains 2M Ag+ and 2M Cu++ ions. The
charger in cell potential after the passage of 10 amp current for 4825 sec is:
(A) 0.000738 V (B) 1.00738
(C) 0.0038 V
(D) none

1.30

For the cell (at 298 K)

Ag(s) | AgCl(s) | Cl-(aq) || AgNO3(aq) | Ag(s)
Which of the following is correct
(A) The cell emf will be zero when [Ag+]a = [Ag+]c ([Ag+] in anodic compartment
= [Ag+] in cathodic compartment)
(B) The amount of AgCl(s) precipitate in anodic compartment will decrease
with the working of the cell.
(C) The concentration of [Ag+] = constant, in anodic compartment during
working of cell.
0.059
1
(D) Ecell = EAg+ | Ag ECl-|AgCl|Ag
log
1
[Cl ]a

1.31

Acetic acid is titrated with NaOH solution. Which of the following statement is
correct for this titration?
(A) Conductance increases upto equivalence point, then it decrease.
(B) Conductance decreases upto equivalence point, then it increase.
(C) First conductance increases slowly upto equivalence point and then
increases rapidly.
(D) First conductance increases slowly upto equivalence point and then drops
rapidly.

1.32

During an electrolysis of conc. H2SO4, perdissulphuric acid (H2S2O8) and O2

from in equimolar amount. The amount of H2 that will form simultaneously will
be (2H2SO4 H2S2O8 + 2H+ + 2e-)
(A) thrice that of O2 in moles
(B) twice that of O2 in moles
(C) equal to that of O2 in moles
(D) half of that of O2 in moles
SECTION II : MULTIPLE CORRECT ANSWER TYPE

1.33

In which of the following cell (s) : Ecell = Ecell ?

(A) Cu(s)|Cu2+ (0.01M)||Ag+(0.1M)|Ag(s)
(B) Pt(H2)|pH = 1 ||Zn2+(0.01M)|Zn(s)
(C) Pt(H2)|pH = 1 ||Zn2+(1M)|Zn(s)
(D) Pt(H2)|H+ = 00.1 ||Zn2+(0.01M)|Zn(s)

1.34

Which one is/are correct among the following?

Given, the half cell emfs ECu+2|Cu = 0.337, ECu+1|Cu = 0.521
(A) Cu+1 disproportionates
(B) Cu and Cu2+ comproportionates (reserve of disproportionates into Cu+).
(C) ECu|Cu+2 + ECu+1|Cu is positive
(D) All of these

1.35

Indicate the correct statements:

(A) Conductivity cells have cell constant values independent of the solution
filled into the cell.
(B) DC (direct current) is not used for measuring the resistance of a solutn.
(C) Kohlrausch law is valid both for strong and weak electrolytes.
(D) The k decreases but M and E increase on dilution.

1.36

1.37

The standard redox potential E of the following systems are

System
(i)
MnO4 + 8H+ + 5e-
Mn2+ + 4H2O
1.51
2+
4+
(ii)
Sn
Sn + 2e
2(iii)
Cr2O7 + 14H+ + 6e-
2Cr3+ + 7H2O
(iv)
Ce3+
Ce4+ + eThe oxidizing power of the various species are related as
(A) Cr2O72- > MnO4- (B) Ce4+ > Sn4+
(C) Ce4+ > MnO4-

E (volts)
- 0.15
1.33
- 1.61
(D) MnO4- > Sn4+

Mark out the correct statement(s) regarding electrolytic molar conductivity.

(A) It increase as temperature increases.
(B) It experiences resistance due to vibration of ion at the mean position.
(C) Increase in concentration decrease the electrolytic molar conductivity of
both the strong as well as the weak electrolyte.
(D) Greater the polarity of solvent, greater is the electrolytic molar conduction.
SECTION - III : ASSERTION & REASON TYPE

1.38

Statement-1: In electrochemical cell, we cannot use KCI in the salt bridge if

anodic or cathodic compartment consists of Ag+ of Pb2+ ion.
Statement-2: Salt bridge is employed to maintain the electrical neutrality and
to minimize the liquid-liquid junction potential.
(A) Statement-1 is True, Statement-2 is True; Statement-2 is a correct
explanation for Statement-1.
(B) Statement-1 is True, Statement-2 is True; Statement-2 is NOT a correct
explanation for Statement-1.
(C) Statement-1 is True, Statement-2 is False.
(D) Statement-1 is False, Statement-2 is True.

1.39

Statement-1: Zinc protect the iron better than tin even after it cracks.
Statement-2: EOPzn < EOPfe But EOPSn > EOPfe
(A) Statement-1 is True, Statement-2 is True; Statement-2 is a correct
explanation for Statement-1.
(B) Statement-1 is True, Statement-2 is True; Statement-2 is NOT a correct
explanation for Statement-1.
(C) Statement-1 is True, Statement-2 is False.
(D) Statement-1 is False, Statement-2 is True.

1.40

Statement-1: On increasing dilution, the specific conductance keep on

increasing.
Statement-2: On increasing dilution, degree of ionization of weak electrolyte
increase and mobility of ions also increase.
(A) Statement-1 is True, Statement-2 is True; Statement-2 is a correct
explanation for Statement-1.
(B) Statement-1 is True, Statement-2 is True; Statement-2 is NOT a correct
explanation for Statement-1.
(C) Statement-1 is True, Statement-2 is False.
(D) Statement-1 is False, Statement-2 is True.

1.41

Ni++ + 2e--
Ni
++
Fe
+
2e-

Fe
EFe++ |Fe < ENi++ | Ni and Ered > 0

So Fe electrode is cathode and Ni electrodes and Ni electrode is

anode.
Statement-1: For the reaction :

Statement-2: Because G < 0 and Ecell > 0, so cell is possible.

(A) Statement-1 is True, Statement-2 is True; Statement-2 is a correct
explanation for Statement-1.
(B) Statement-1 is True, Statement-2 is True; Statement-2 is NOT a correct
explanation for Statement-1.
(C) Statement-1 is True, Statement-2 is False.
(D) Statement-1 is False, Statement-2 is True.
SECTION-IV : TRUE & FALSE TYPE
1.42

Identity the ture and false statement and answer in given options
1.
During electrolysis of 1M NaCl solution Cl2 does not form at the anode.
2.
For a concentration cell with its reaction at equilibrium both Ecell and
Ecell are zero.
3.
In a solution of HCN the concentration of CN- ions is given by 10-pH.
(A) FTF
(B) TTT
(C) FFF
(D) FTT

1.43

KMnO4 librates O2 from water in presence of an acid.

Given, EMnO4,Mn+2,H+|Pt = 1.51 V
EH+|O2|Pt = 1.223 V

1.44

The standard potentials of some metal-insoluble salt-anoin electrode are as

given below
Ag AgCl
Ered = 0.222
Ag AgBr
= 0.03
Ag AgI
= - 0.151
Ag Ag2S
= - 0.69
Then the KSP values must follow:
KSP (AgCl) > KSP (AgBr) > KSP(AGI) > KSP (Ag2S)

1.45

If the E for N2O4 + 2H+ + 2e

2HNO2 is 1.07 V. Then the standard cell
emf of the cell 2N2O4 + 2H2
4HNO2 will be 2.14 volt:

1.46

At 300 K specific conductivity of ethanol is 4 10-10 mho cm-1. The ionic

conductance of H+, C2H5O- at this temperature is 300 and 100 mho cm2
equivalent-1 respectively. Then the negative logarithm of ionic product of
alcohol will be 18.

1.47

Metallic sodium cannot be prepared from electrolysis of an aqueous solution

of NaCl because the SRP H2O < SRP Na+.

1.48

The process of AgCN + KCN

K[Ag(CN)2] involves the oxidation of Ag.

SECTION V : COMPREHENSIN TYPE

Comprehension # 1
A fuel cell is a cell that is continuously supplied with an oxidant and a
reductant so that it can deliver a current indefinitely.
Fuel cells offer the possibility of achieving high thermodynamic efficiency in
the conversion of Gibbs energy into mechanical work. Internal combustion
engines at best convert only the fraction (T2 T1)/T2 of the heat of combustion
into mechanical work.
G
While the thermodynamic efficiency of the fuel cell is given by,
, where
H
G is the Gibbs energy change for the cell reaction and H is the enthalpy
change of the cell reaction.
A hydrogen-oxygen fuel cell may have an acidic or alkaline electrolyte.
2.303RT
Pt|H2(g)|H+(aq.)||H2O( )|O2(g)|Pt;
= 0.06
F
The above fuel cell is used to produce constant current supply under constant
temperature & 30 atm constant total pressure condition in a cylinder. If 10
moles H2 and 5 moles of O2 were taken initially. Rate of combustion of O2 is
10 milli moles per minute.
The half cell reactions are
1
O2(g) + 2H+ (aq) + 2e-
H2O ( )
E = 1.246V
2
2H+ (aq) + 2e-
H2(g)
E = 0
To maximize the power per unit mass of an electrochemical cell, the
electronic and electrolytic resistances of the cell must be minimized. Since
fused salts have lower electrolytic resistances than aqueous solutions, hightemperature electrochemical cells are of special interest for practical
applications.
1.49

Calculate e.m.f. of the given cell at t = 0. (log 2 = 0.3).

(A) 1.255 V
(B) 1.35 V
(C) 1.3 V

(D) 1.246 V

1.50

The above fuel cell is used completely as an electrolytic cell with Cu

voltameter of resistance 26.94 using Pt electrodes. Initially Cu voltameter
contains 1 litre solution of 0.05M CuSO4.[H+] in solution after electrolysis
(Assuming no change on volume of solution).
(A) 0.015 M
(B) 0.03 M
(C) 0.025 M
(D) 0.01 M

1.51

If m (Cu2+) = 0.01S m2 mole -1, m (H+) = 0.035 S m2 mole-1 and m (SO42-)

= 0.016 S m2 mole-1, specific conductivity of resulting solution left in sopper
voltameter after above electrolysis is
(A) 2.57 S m-1
(B) 1.75 S m-1
(C) 1.525 S m-1
(D)
-1
2.25 S m

Comprehension # 2
REDOX TITRATIONS
Titrations are one of the methods we can use to discover the precise
concentrations of solution. A typical titration involves adding a solution from a
burette to another solution in a flask. The endpoint of the titration is found by
watching a colour change taking place. However, a problem arises when a
suitable indicator cannot be found, or when the colour changes involved are
unclear. In cases redox potential may sometimes come to the rescue.

A particularly well known example (Fig.1) is a method of discovering the

concentration of iron in a solution by titrating them with a solution of cerium
(IV). The redox potential that are of interest here are EFe3+/Fe2+ = + 0.77 V and
ECe4+/Ce3+ = + 1.61 V. These tell us that cercium (IV) ions are the oxidizing
agents, and iron (II) ions are the reducing agent. They should react according
to the equation
Fe2+ (aq) + Ce4+ (aq) Fe3+ (aq) + Ce3+ (aq)
Now imagine that we know the concentration of the cerium (IV) ions solution
in the burette. We want to measure the concentration of the iron (II) solution. If
we add just one drop of the cerium (IV) solution from the bruette, some of the
iron (II) ions will be oxidised. As a consequence the beaker would now contain
a large number of unreacted ions, but also some iron (III) ions as well. All of
the cerium (III). The solution in the beaker now represents an iron(III)/iron(II)
half cell, although not at standard conditions. Thus the e.m.f. of the cell will be
near, but not equal, to EFe3+/Fe2+.

If we continue to ad cerium (IV) solution, the number of iron (II) ions is

gradually reduced and eventually only a very few are left (Table).At this stage
the next few drops of cerium (IV) solution convert all the remaining iron (II)
ions into iron (III), and some of the cerium (IV) ions are left unreacted. Once
this happens we no longer ions and a smaller number of cerium (IV) ions. The
solution in the beaker now behaves as a cerium (IV)/cerium (III) half-cell
(although not a standard one).

Just before all the iron (II) ions are converted into iron (III) we have a cell with
an e.m.f.of around + 0.77 V. After all the iron (II) ions are oxidised, we have a
cell with an e.m.f. of about + 1.61 V. This rapid rise in e.m.f. occurs with the
addition of hust one drop of cerium (IV) solution. You should be able to
understand why a graph of cell e.m.f. against volume of cerium (IV) solution
added looks like that of Fig. 2. The end point of the titration can be read from
the graph and the concentration of the iron (II) solution calculated in the usual
way

1.52

When an ion is converted into a complex ion, the redox potential changes.
You can see this in the case of the e.m.f. of the iron (III)/ iron (II) system (+
0.77 V) and the hexacyanoferrate (III)/ hexacyanoferrate (II) system (+0.36 V).
The cyanide ion is said to stabilize the oxidation state of the iorn. If you were
to make up a cell
Pt(s)

Fe(CN)6 3 (aq), Fe(CN)6 4 (aq)

1mol dm 3

Fe3 (aq), Fe 2 (aq),

1mol dm 3

Pt(s)

What would be the e.m.f. and what would be the cell reaction?

1.53

(A) 0.41V,

Fe(CN)64- (aq.) + Fe3+(aq.)

Fe(CN)63-(aq.) + Fe2+ (aq.)

(B) 0.13V,

Fe(CN)64- (aq.) + Fe3+(aq.)

Fe(CN)63-(aq.) + Fe2+ (aq.)

(C) 0.41V,

Fe(CN)63- (aq.) + Fe2+(aq.)

Fe(CN)64-(aq.) + Fe3+ (aq.)

(D) 0.13V,

Fe(CN)63- (aq.) + Fe2+(aq.)

Fe(CN)64-(aq.) + Fe3+ (aq.)

The cell shown below was set up

Pt(s)

Fe3 (aq), Fe 2 (aq), Br(aq),

1mol dm 3

Br2 (), Pt(s)

1mol dm 3

What would be the cell e.m.f.? If potassium cyanide solution were added to
the left hand half cell (with due care!), what would you expect to happen to the
e.m.f. of the cell? EBr2/Br- = 1.07V and use data of previousquestion, if
required.

(A) 0.30 V,

emf will increase from 0.30V to 0.41V

(B) 1.84 V,

emf will decrease from 1.84V to 1.43V

(C) 0.30 V,

emf will increase from 0.30V to 0.71V

(D) 0.30 V,

emf will increase from 0.30V to 0.43V

1.54

Imagine you were given a solution of potassium dichromate (VI) in a beaker,

and a solution of iron (II) sulphate in a burette. You do not know the
concentration of dichromate (VI) ions, but the concentration of the iron (II)
solution is known. Your task is to carry out a redox titration using the two
solutions in order to determine the concentration of dichromate(VI) ions.
Sketch a graph how the e.m.f. changes in the course of above titration.
ECr2O2-7/Cr3+ = 1.33 V, EFe3+/Fe2+ = 0.77 V.

Comprehension # 3
The molar conductance of NaCl varies with the concentration as shown in the
following table.
Cm m b C
Where Cm = molar specific conductance
m = molar specific conductance at infinite

dilution
C = molar concentration

Molar Concentration
of NaCl

Molar Conductance
In ohm-1 cm2 mole-1

4 10-4
9 10-4
16 10-4

107
97
87

When a certain conductivity cell (C) was filled with 25 10-4(M) NaCl solution.
The resistance of the cell was found to be 1000 ohm. At infinite dilution,
conductance of Cl- and SO4 2 are 80 ohm-1cm2mole-1 and 160 ohm1
cm2mole-1 respectively.
1.55

What is the molar conductance of NaCl at infinite dilution?

(A) 147 ohm-1cm2mole-1
(B) 107 ohm-1cm2mole-1
(C) 127 ohm-1cm2mole-1
(D) 157 ohm-1cm2mole-1

1.56

What is the cell constant of the conductivity cell (C)

(A) 0.3895 cm1
(B) 3.85 cm1
(C) 38.5 cm1

1.57

(D) 0.1925 cm1

If the cell (C) is filled with 5 10-3 (N) Na2SO4 the observed resistance was
400 ohm. What is the molar conductance of Na2SO4.
(A) 19.25 ohm-1cm2mole-1
(B) 96.25 ohm-1cm2mole-1
-1
2
-1
(C) 385 ohm cm mole
(D) 192.5 ohm-1cm2mole-1

Comprehension # 4
METALLURGY OF COPPER
Electrolytic purification of copper is required since the product of the
Bessemer convert is impure. Sheets of pure copper are made the cathodes
and blister copper is used as the cathodes. The bath contains CuSO4, H2SO4
and NaCl. Metallic copper goes into solution as Cu+2 ions at the anode and
deposited at the cathode. Zinc and iron go into solution and do not deposit at
the cathode along with copper. Silver goes into solution as Ag+ ions, but
forms sludge in the electrolysis cell. The noble metals such as gold and
platinum do not dissolve; they fall to the bottom when released from the
copper anode. They help to pay for the copper refining process.
1.58

In what form will solver be recovered from the plating bath?

(A) Ag+
(B) AgCl
(C) Ag
(D) Ag Cu alloy

1.59

The different chemical behaviour of various metal ions (for example only Cu is
deposited on the cathode) involved are explainable best using
(A) their amount in impure copper
(B) the electrochemical series
(C) their ionization potentials
(D) their hydration energies

1.60

The voltage is kept low enough during the operation. This is to ensure that
(A) Fe+2 and Zn+2 ions are kept in solution only
(B) there is no risk of electric shocks to the plant operators
(C) gold and platinum do not dissolve in solution and are recovered as solids
(D) temperature control is maintained to effect reaction rate control

1.61

What approximate purity may be achieved in this process ?

(A) 90%
(B) 95%
(C) 99%
(D) 99.9%

1.62

The most important role of various electrolytes added to the electrorefining

bath in this case is
(A) to reduce the temperature of bath
(B) to result in good electrical connectivity so as to have high production rates
(C) so that the anode acts as an attackable electrodes
(D) to enhance the viscosity of electrolyte thus preventing leakage from bath.

Comprehension # 5
A solution that is relatively resistance to change in pH is called a buffer
solution. We can also say that the solution is buffered the simplest way to
achieve substantial conc. Of both acid and base in the same solution to use a
conjugate acid-base pair. The most common form of buffer solution contains a
weak acid and its conjugate base or a weak base and its conjugate acid.
By using buffer concept. A student prepare 2L buffer solution of 0.0330 M
NaH2PO4. The solution is divided in half between the two compartment (each
containing 1L buffe) of an electrolysis is carried out for 212 min with a
constant current of 1.25 A. [Assumes that pKa(H2PO4-) = 7.2]
1.63

The concentration of [H+] consumed by HPO42- at anode is:

(A) 0.165 M
(B) 0.330 M
(C) 1.00 M
(D) 0.0825 M

1.64

pH in 1st compartment cell (at anode) is:

(A) 7.2
(B) 6.72

(C) 7.67

(D) 7.0

pH in 2nd compartment cell (at cathode) is:

(A) 7.2
(B) 6.72

(C) 7.67

(D) 7.0

1.65

SECTION VI: Matrix MATCH TYPE

1.66

Match Matrix
(A) Zn | Zn2+ (C) || Zn2+ (2C) | Zn
(B) H2(P) | HCl(1N) | H2(P)
(C) Cu | Cu2+ (0.01M) || Ag+ (0.1M) | Ag

(p) Spontaneous cell reaction

(q) Working cell representation
(r) Concentration of cation in
cathodic
Compartment
increases upto quilibrium

(D) AgCl | Ag (KCl, 0.1 M) || Ag+ (0.01M) | Ag

(s)

Concentration cell

1.67

Match the following:

Column I
(A)
(B)
(C)
(D)
(E)

1.68

Column II
1
Concentration cell
(p) H 2 + O 2
H 2 O + electrical energy
2
Spontaneous cell reaction (q) E 0 cell 0
Daniel cell
(r) Ecell > 0
Hofmann voltameter
(s) Galvanic cell
1
Fuel cell
(t) H2O + electrical energy
H2 + O2
2

Assume inert electrolyte used in salt bridge in all the given cells is KCl.(Ka of
HCOOH = 2 104)
Column I
Column II
(A) Zn | ZnSO4(1M)|| ZnSO4(2M) | Zn
(p) Sponataneous cell reaction.
(B) Cu| CuCl2(1M) || CuSO4(2M) | Cu
(q) Osmotic pressure of cathodic
solution is greater than that of
anodic solution .
(C) Ag|AgCl(sat.sol.) || AgNO3(1M)|Ag

(r) At equilibrium condition of the

cell, freezing point of anodic
solution is higher than of
cathodic solution

(D) Pt|H2| HCOOH (1M) || HCl (1M)|H2|Pt (s) At equilibrium condition of the
cell, boiling point of cathodic
solution is higher than that of
anodic solution

1.69

Match the coloumn:

Column I
(A) Molten PbCl2 using inert electrode
(B) Sodium chloride solution using inert electrode
(C) Silver nitrate solution with silver electrode

(D) Sodium nitrate solution using inert electrode

Coloumn II
(p) Metal of salt will
reduced
(q) H2O + 2e H2(g) +
2OH
(r) Solution
becomes
basic
after
electrolysis
(s) Solution
becomes
acidic
after
electrolysis
(t) Solution
become
acidic
after
electrolysis

1.70

Column I
(Quantities)
(A) Molar conductance
(B) emf of a cell in operation
(C) Electrode potential
(D) Standard reduction potential

Column II
(Factors on which dependency exist)
(p) Temperature
(q) Concentration of species involved
(r) Nature of substance involved
(s) No. of electrons lost or gained in
the reaction

SECTION VII: SUBJECTIVE ANSWER TYPE

SHORT SUBJECTIVE
1.71

In the acid base titration [H3PO4(0.1 M) + NaOH (0.1M)] e.m.f of the solution is
measured by coupling this electrodes with suitable reference electrode.When
alkali is added pH of solution is in accordance with equation , Ecell = E0cell +
0.059 pH.
For
H3PO4 Ka1 = 103 ; Ka2 = 108 ; Ka3 = 1013
What is the cell e.m.f. at the llnd end point of the titration if E0cell at this stage
is 1.3805 V.

1.72

100 ml, 0.05 M CuSO4 solution is electrolysed by using current of 0.965 for
100 min. Find the pH of solution at the end of electrolysis.

1.73

The e.m.f. of a cell corresponding to the reaction

An + 2H + (aq)
Zn 2+ (0.1M) + H 2 (g) (1atm)
is 0.26 volt at 25 C. Calculate the pH of the solution at the hydrogen
electrode
E0 zn2+ /zn = 0.76 volt and E 0 H+ /H = 0
2

1.74

A fuel cell uses CH4 (g) and forms CO32 at the anode . It is used to power a
car with 80 Amp. For 0.96 hr. How many litres of CH4 (g) (stp.) would be
required ? (Vm = 22.4 L/mol) (F = 96500). Assume 100% efficiency.

1.75

Small spherical ball of silver metal used in jewellery having diameter 0.1 cm,
which is obtained by the electrolytic deposition. It total number of balls in
jewellery is 10,000, then calculate the applied amount of electricity in
coulombs, which is used on the depositon on electrodes having entire surface
0.12 m2 .[Density of Ag = 10.5]
It is assumed that 3.5% electricity consumed as wastage during electrolysis
and 60% of electrode body immessed in electrode. [Given your answer in
multiple of 104]

LONG SUBJECTIVE
1.76

The Ecell = 1.18 V for

Zn(s) | Zn+2(1M) || Cu+2 (1M) | Cu(s).
Determine the value of x if when excess granulated zinc is added to 1 M Cu2+
2.303RT
solution the [Cu+2] eq. becomes 10XM. ( T = 298 K,
0.059)
F

1.77

1.78

For the cells in opposition

Zn(s) | ZnCl2(sol.) | AgCl(s) | Ag | AgCl (s) | ZnCl2(sol.) |Zn(s)
C1 = 0.02 M
C2 = 0.5 M
Find out the emf (in millivolt) of the resultant cell ? (Take log 2 = 0.3,
RT
at 298K = 0.060 )
F
AT + / T couple was prepared by saturating 0.1 M KBr with T Br and
following the T from the relatively insoluble bromide to equilibrate. This
couple was observed to have a potential of 0.443 V with respect to (Report
answer in multiplication of 108 ) (E 0Pb2+ /Pb = 0.126, E T0 + /T 0.336V)
2.303RT
= 0.059)
F
The following two cells with initial concentration as given are connected in
parallel with each other.
(1) Fe(s) | Fe(NO3)2(aq.) (1M) || SnCl2(aq.) (1M) | Sn(s)
(2) Zn(s) | ZnSO4(aq.) (1m) || Fe(NO3)2(aq.) (1M) | Fe(s)
After sufficient time equilibrium is established in the circuit . What will be the
concentrations (in mmoles/L) of Fe2+ ions in first and second cells
respectively?

(Take antilog (0.5509) = 3.55,

1.79

(Take E 0Sn 2+ /Sn = 0.14V, E 0Zn 2+ /Zn = 0.76V, E 0Fe2 = 0.44V,2.3 RT=6433, log2 = 0.3]
1.80

The conductivity of a solution may be taken to be directly proportional to the

total concentration of the charge carries (ions) present in it in many cases.
Using the above find the percent in conductivity (k) of a solution of a weak
monoacidic base BOH when its 0.1 M solution is diluted its original volume.
(Kb = 105 for BOH) (take

50 = 7.07) (Mark the answer to nearest integer )

1.81

At 0.04 M concentration the molar conductivity of a solution of a electrolyte is

5000 1 cm2 mol1 while at 0.01 M concentration the value is 5100 1 cm2
mol1 . Making necessary assumption (Taking it as strong electrolyte ) find the
molar conductivity at infinite dilution and also determine the degree of
dissociation of strong electrolyte at 0.04 M

1.82

A silver coulomb meter is in series with a cell electrolyzing water. In a time of

1 minute at a constant current, 1.08 g silver got deposited on the cathode of
the coulometer. What total volume (in mL) of the gases would have produced
in other cell if in this cell the anodic and cathodic efficiencies were 90% and
80% respectively. Assume STP conditions and the gases collected are dry.
(Ag 108) (Molar volume of any ideal gas at STP = 22.4 L)

1.83

Calculate the emf of the cell in mV (atleast in fist two digits must match with
correct answer) (giving your answer in magnitude only).

Ag(s),AgIO3 (s) Ag + (xM),HIO3 (1M) Zn +2 (1M) Zn(s)

If KSP = 3 108 for AgIO3 and Ka =

2Ag++ Zn is 1.56 V.
(log 3 = 0.48) (Take

RT
= 0.059)
F

1
for HIO3 and E 0cell for 2Ag + Zn+2
6