4664-6 en PDF

Linear motion
standard range
Contents
(by chapters)
The SKF brand now stands for more

than ever before, and means more
to you as a valued customer.
General
While SKF maintains its leadership

as the hallmark of quality bearings
throughout the world, new dimensions
in technical advances, product support
and services have evolved SKF into
atruly solutions-oriented supplier,
creating greater value for customers.
Guiding systems
These solutions encompass ways to

bring greater productivity to customers,
not only with breakthrough applicationspecific products, but also through
leading-edge design simulation tools
and consultancy services, plant asset
efficiency maintenance programmes,
and the industrys most advanced
supply management techniques.
The SKF brand still stands for the very
best in rolling bearings, but it now
stands for much more.
SKF the knowledge engineering
company
14 Shaft guidings
19 Ordering key for LBBR compact
series
20 LBBRCompact series
20 LBBR ../HV6Corrosion resistant type
21 LPBRLinear plain bearings
21 LUHRLinear ball bearing units
22 LUHR PBLinear plain bearing units
22 LUJRLinear ball bearing units
23 LTBRTandem linear ball bearing units
23 LSHSShaft blocks for compact series
24 LTDRDuo linear ball bearing units
24 LQBRQuadro linear ball bearing units
25 LEBSTandem shaft blocks
25 Appropriate special seals
26 Ordering key for LBBR standard
series
28 LBCDStandard series 3, closed type
28 LBCRStandard series 3, closed type
29 LPARLinear plain bearings, closed
type
29 LUCDSingle units, self-aligning,
closed type
30 LUCESingle units, self-aligning,
closed type
30 LUCRSingle units, closed type
31 LUCR PASingle plain bearing units,
closed type
31 LUCSSingle units, closed type
32 LUNDSingle units, self-aligning,
closed type
32 LUNESingle units, self-aligning,
closed type
33 LVCDFlanged self-aligning units
33 LVCRFlanged units
34 LSCSShaft blocks
34 LSNSShaft blocks
35 LTCDTandem units, self-aligning,
closed type
35 LTCRTandem units, closed type
36 LQCDQuadro units, self-aligning,
closed type
36 LQCRQuadro units, closed type
37
38
38
39
39
40
40
41
41
42
42
43
43
44
44
LEASTandem shaft blocks, closed type

LBCFStandard series 3, open type
LBCTStandard series 3, open type
LBHTHeavy-load type, open type
LPATLinear plain bearings, open type
LUCFSingle units, self-aligning, open
type
LUCTSingle units, open type
LUCT BHSingle heavy-load units,
open type
LUCT .. PASingle units, open type
LUNFSingle units, self-aligning, open
type
LTCFTandem units, self-aligning, open
type
LTCTTandem units, open type
LQCFQuadro units, self-aligning, open
type
LQCTQuadro units, open type
LRCB/LRCCShaft supports, open
type
45 Precision shafts
46 LJMPrecision shafts, steel
46 LJMHHard chromium plated precision
shafts
46 LJMRPrecision shafts, stainless steel
46 LJMSPrecision shafts, stainless steel
46 LJTHollow shafts, high grade steel
47 Ordering key for precision shafts
48 ESSC 1Precision shaft configurations
51 Design and basic data
53 Linear ball bearing table without
drive
54 Ordering key for linear ball bearing
table without drive
55 LZBU .. A-2LSQuadro linear tables
56 LZBU .. B-2LSQuadro linear tables
57 LZAU ..2LSQuadro linear tables
58 Applications
59
60
61
62
62
62
64
64
64
66
66
Profile rail guides

Ordering key for profile rail guides
Accessories for profile rail guides
LLRHS .. SA
LLRHS .. A
LLRRS .. LA
LLRHS .. SU
LLRHS .. U
LLRHS .. LU
LLRHS .. R
LLRHS .. LR
88
89
89
90
90
90
90
91
91
92
68 Applications
92
69 Miniature profile rail guides
72 Ordering key for miniature profile rail
guides
73 LLMHRStandard rails
73 LLMWRWide rails
73 LLMHC .. TAStandard carriages
74 LLMWC .. TACarriages for wide rails
74 LLMHC .. LALong carriages
74 LLMWC .. LALong carriages for wide
rails
75 Applications
77 Precision rail guides
77 Modular range rail guides
78 Anti cage-creep system (ACSM) for
LWRE
79 Ordering key for precision rail guides
80 LWRPrecision rail guides
80 LWRBPrecision rail guides
80 LWALCross roller assemblies,
aluminium cages
80 LWJKBall assemblies, plastics cages
80 LWAKCross roller assemblies, plastics
cages
80 LWERAEnd stops
80 LWGDSpecial attachment screws
81 LWR 3/6 .. KitPrecision rail guide kits
82 LWRB 1Precision rail guides
82 LWRB 2Precision rail guides
83 LWR 3Precision rail guides
85 LWREPrecision rail guides
85 LWAKECross roller assemblies,
plastics cage
85 LWEREEnd stops
85 LWGDSpecial attachment screws
86 LWRE 3/6 .. KitPrecision rail guide
kits
87 LWRE 3/6 .. ACS KitPrecision rail
guide kits with ACS
88 LWRE 3Precision rail guides
93
93
94
94
94
94
94
95
95
96
96
96
96
96
97
97
97
97
98
98
98
98
99
99
99
99
100
101
101
LWRE 2211Precision rail guides

LWRB 2 ACSMPrecision rail guides
LWRE 3/6/9 ACSMPrecision rail
guides
LWJK 2 ACSMPrecision rail guides
LWAKE 3/6/9 ACSMPrecision rail
guides
LWRE 3 ACSM KitPrecision rail guide
kits with ACSM
LWRE 6 ACSM KitPrecision rail guide
kits with ACSM
LWRE 3 ACSPrecision rail guides with
ACS
LWRE 2211 ACSPrecision rail guides
with ACS
ACS
ACS
LWRM/LWRVPrecision rail guides
LWHWNeedle roller cage, aluminium
LWEARM End stops
LWEARV End stops
LWGDSpecial attachment screws
LWRM 6/LWRV 6Precision rail guides
LWRM 9/LWRV 9Precision rail guides
LWM/LWVPrecision rail guides
LWHWNeedle roller cage, aluminium
LWEAMEnd stops
LWEAVEnd stops
LWGDSpecial attachment screws
LWM 3015/LWV 3015Precision rail
guides
M3 DIN 84
guides
M5 DIN 84
guides
M6 DIN 84
guides
M8 DIN 84
guides
M10 DIN 84
guides
M12 DIN 84
LWRPM/LWRPVPrecision rail guides
LWRPM 3/6/9Precision rail guides
LWRPV 3/6/9Precision rail guides
102 Applications
Driving systems
105 Ball and roller screws

106 How to make your choose
107
108
109
109
110
111
111
112
112
113
113
114
114
116
118
119
120
122
122
123
123
123
124
124
125
126
126
127
Ball screws
Ordering key for ball screws
SD/BDMiniature screws
SHMiniature screws
SX/BXUniversal screws
FHRFRound flanges for SX/BX nuts
FHSFSquare flanges for SX/BX nuts
SN/BNPrecision screw
SND/BNDPrecision screw, DIN
standard
PNPrecision screw, preloaded
PNDPrecision screw, DIN standard,
preloaded
SL/BLLong lead screws
SLD/BLDLong lead screws, DIN
standard
Rotating nut
Shaft and combinations for rolled ball
screws
Standard end machining for nominal
diameter < 16 mm
diameter 16 mm
PLBUPlummer bearing units
FLBUFlanged bearing units
BUFEnd bearing units
FBS QSupport bearing cartridge
units (4 bearings matched in set)
FBS DSupport bearing cartridge
units (2 bearings matched in set)
Ground ball screws
Service range (Europe only)
Ordering key for ground ball screws
PGFEscrew with DIN double flanged,
preloaded nuts
SGFEscrew with DIN single flanged,
axial play
PGFJscrew with DIN flanged nuts
with internal preload
128 Precision ground screw (inches

version)
130 Applications
131
132
133
134
134
137
Roller screws
Planetary roller screws: principle
Recirculating roller screws: principle
Complete assemblies
Service Range
Ordering key for roller screws
138 Planetary roller screws

3
138 BRCRange
139 FLRBU/BRCRange
140 SRCRange
142 SRFRange
144 TRU/PRURange
147 TRK/PRKRange
150
150
151
152
153
154
155
157
Recirculating roller screws

BVCRange
FLRBU/BVC
SVCRange
PVURange
PVKRange
FLRBUAccessories for roller screws
Symbols
158 Applications
Actuation systems
191
192
193
194
195
196
197
198
199
200
202
204
206
208
210
STD
SKS/SKA
SLS
CALA 36A
CAXC 33 limit switches
MATRIX
MAX1
MAX3
MAX6
CARE 33
IMD3 series
ID8A series
ID8B series
IA4A series
IA4B series
212
213
214
216
217
Control units
BCU
BCP
SCU
SCP
161 About actuation systems

162 Selection guide
165
165
166
168
169
170
171
171
172
174
176
178
179
180
181
182
183
184
185
186
187
188
189
190
Telescopic pillars
TELEMAG: principle
TELEMAG TFG
TELEMAG TLG
TELESMART: principle
TELESMART TXG
Linear actuators
CAT: principle
CAT 33H
CAT 33
CAT 32B
Page with all detailed drawings
of CAT 32B, CAT 33 and CAT 33H
CAR: principle
CAR 22
CAR 32
CAR 40
MAGFORCE: principle
WSP
ASM
DSP
SKG
SKD
STW
STG
218 Hand switches

219 EHA 3
220 Foot switch
221 ST
222 Desk switches
223 ST
Positioning systems
235
235
236
236
236
236
236
236
237
General
LZM miniature slides: principle
GCLStandard slides: principle
GCLAStandard slides: principle
RMStandard slides: principle
SSM/SSKDovetail slides: principle
TO/TSCompact cross tables: principle
RSM/RSKPrecision slides: principle
LZBB/LZABLinear ball bearing
tables: principle
LTBProfile rail guide slides: principle
Complete systems
Ordering key for miniature slides
LZMMiniature slides
Ordering key for standard slides
GCLStandard slides, steel version
GCLAStandard slides, aluminium
version
RMStandard slides
Ordering key for slides, tables and
compact cross tables
SSM/SSKDovetail slides
TO/TSCompact cross tables
RSM/RSKPrecision slides
Ordering key for linear ball bearing
table with drive
LZBBLinear ball bearing tables, ball
screw
LZABLinear ball bearing tables, ball
screw
Ordering key for profile rail guide
slides
LTBProfile rail guide slides
237
237
240
241
243
244
246
248
249
250
253
254
256
257
258
224 Spare parts

224 Type codes for accessories
and spare parts:

224 CAR 22

224 CAR 32

225 CAR 40

225 CAT 33

226 CAT 33H

226 CAT 32B
227 Attachments, spare parts
228 Limit switches, spare parts
228 CAXC 33
228 CAXB 22/32/32b/40
229 Motors, spare parts
259
260
263 Applications
Customized solutions
265 Standard plug & play

electromechanical cylinder
265 Compact electromechanical cylinder
266 Complete systems for positioning
266 Linear motor tables
230 Glossary and definitions

233 Applications
SKF The knowledge

engineering company
Contents
(by alphabetical order)
A
About actuation systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Accessories for profile rail guides. . . . . . . . . . . . . . . . . . . . . . . . . 61
Actuation systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Anti cage-creep system (ACSM) for LWRE. . . . . . . . . . . . . . . . . . 78
Applications:
For actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
For ball screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
For linear ball bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
For miniature profile rail guides. . . . . . . . . . . . . . . . . . . . . . . . 75
For positioning tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
For precision rail guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
For profile rail guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
For roller screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Appropriate special seals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ASM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Attachments, actuators spare parts. . . . . . . . . . . . . . . . . . . . . . 227
B
Ball and roller screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Ball screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
BCU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
BCP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
BRC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
BUF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
BVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
C.
CALA 36A: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
CALA 36A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
CAR: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
CAR 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180, 224
CAR 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181, 224
CAR 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182, 225
CARE 33: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
CARE 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
CAT: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
CAT 32B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176, 226
CAT 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174, 225
CAT 33H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172, 226
CAXB 22/32/32b/40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
CAXC 33 Limit switches. . . . . . . . . . . . . . . . . . . . . . . . . . . 195,228
Compact electromechanical cylinder. . . . . . . . . . . . . . . . . . . . . . 265
Complete assemblies, roller screws . . . . . . . . . . . . . . . . . . . . . . 134
Complete systems for positioning. . . . . . . . . . . . . . . . . . . . . . . . 266

Complete systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Control units: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Customized solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
D.
Design and basic data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Desk switches: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Driving systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
DSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
E.
EHA 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
ESSC 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ESSC 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ESSC 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ESSC 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ESSC 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
ESSC 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
ESSC 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
ESSC 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
ESSC 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
ESSC 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
F.
FBS D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FBS Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FHRF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FHSF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLBU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLRBU/BRC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLRBU/BVC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLRBU Accessories for roller screws. . . . . . . . . . . . . . . . . . . . . .
Foot switch: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
123
123
111
111
122
139
151
155
220
G.
GCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GCL: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GCLA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GCLA: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
244
236
246
236
. . .9
5
General (positioning systems). . . . . . . . . . . . . . . . . . . . . . . . . . . 235

Glossary and definitions for actuators . . . . . . . . . . . . . . . . . . . . 230
Ground ball screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Guiding systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
H.
Hand switches: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
How to make your choose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
I.
IA4A series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
IA4B series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
ID8A series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
ID8B series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
IMD3 series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
L.
LBBR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LBBR ../HV6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LBCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LBCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
LBCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LBCT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
LBHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
LEAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
LEBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Limit switches, actuators spare parts. . . . . . . . . . . . . . . . . . . . . 228
Linear actuators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Linear ball bearing table without drive. . . . . . . . . . . . . . . . . . . . . 53
Linear motor tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
LJM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LJMH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LJMR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LJMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LJT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LLMHC ..LA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
LLMHC ..TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
LLMHR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
LLMWC ..LA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
LLMWC ..TA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
LLMWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
LLRHS ..A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
LLRHS ..LR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
LLRHS ..LU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
LLRHS ..R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
LLRHS ..SA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
LLRHS ..SU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
LLRHS ..U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
LLRRS ..LA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
LPAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
LPAT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
LPBR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LQBR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6
LQCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
LQCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
LQCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
LQCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
LRCB/LRCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
LSCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LSHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LSNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LTB: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
LTB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
LTBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LTCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
LTCF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
LTCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
LTCT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
LTDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
LUCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
LUCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
LUCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
LUCR PA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
LUCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
LUCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
LUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
LUCT .. PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
LUCT BH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
LUHR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LUHR PB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
LUJR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LUND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
LUNE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
LUNF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
LVCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
LVCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
LWAK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
LWAKE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
LWAKE 3/6/9 ACSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
LWAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
LWEAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
LWEARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
LWEARV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
LWEAV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
LWERA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
LWERE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
LWGD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 85, 94, 96
LWHW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94, 96
LWJK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
LWJK 2 ACSM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
LWM/LWV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
LWM 3015/LWV 3015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
LWM 4020/LWV 4020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
LWM 5025/LWV 5025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
LWM 6035/LWV 6035 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
LWM 7040/LWV 7040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
LWM 8050/LWV 8050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
LWR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
LWR 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
LWR 3/6 ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
LWR 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
LWR 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
LWRB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
LWRB 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LWRB 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
LWRB 2 ACSM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
LWRE 2211. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
LWRE 2211 ACS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
LWRE 3 ACS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
LWRE 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
LWRE 3 ACSM Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LWRE 3/6 .. Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
LWRE 3/6 .. ACS Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
LWRE 3/6/9 ACSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
LWRE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
LWRE 6 ACS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
LWRE 6 ACSM Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
LWRE 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
LWRE 9 ACS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
LWRM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
LWRM 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
LWRM 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
LWRPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
LWRPM 3/6/9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
LWRPV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
LWRPV 3/6/9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
LWRV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
LWRV 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
LWRV 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
LZAB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
LZAU ..2LS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
LZBB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
LZBB/LZAB: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
LZBU .. A-2LS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
LZBU .. B-2LS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
LZM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
LZM: principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
M.
M3 DIN 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
M5 DIN 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
M6 DIN 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
M8 DIN 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
M10 DIN 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
M12 DIN 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
MAGFORCE: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
MATRIX: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
MAX1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
MAX3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
MAX6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Miniature profile rail guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Modular range rail guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Motors, actuators spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . 229
O.
Ordering key for:
Ball screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Ground ball screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
LBBR compact series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
LBBR standard series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Linear ball bearing table with drive . . . . . . . . . . . . . . . . . . . . 256
Linear ball bearing table without drive. . . . . . . . . . . . . . . . . . . 54
Miniature profile rail guides . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Miniature slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Precision rail guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Precision shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Profile rail guide slides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Profile rail guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Roller screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Slides, tables and compact cross tables. . . . . . . . . . . . . . . . . 249
Standard slides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
P.
Page with all detailed drawings of CAT 32B,
CAT 33 and CAT 33H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
PGFE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
PGFJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Planetary roller screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Planetary roller screws: principle. . . . . . . . . . . . . . . . . . . . . . . . 132
PLBU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
PN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
PND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Positioning systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Precision ground screw (inches version). . . . . . . . . . . . . . . . . . . 128
Precision rail guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Precision shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Profile rail guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
PVK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
PVU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
R.
Recirculating roller screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recirculating roller screws: principle . . . . . . . . . . . . . . . . . . . . .
RM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RM: principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roller screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rotating nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RSM/RSK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RSM/RSK: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
150
133
248
236
131
116
254
236
S.
SCU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
SCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
SD/BD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Service range, roller screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
7
Service range, ground ball screws (Europe only). . . . . . . . . . . . 124

SGFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
SH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Shaft and combinations for rolled ball screws . . . . . . . . . . . . . . 118
Shaft guiding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SKD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
SKG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
SKS/SKA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
SL/BL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
SLD/BLD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
SLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
SN/BN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
SND/BND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Spare parts for actuators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
SRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
SRF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
SSM/SSK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
SSM/SSK: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
ST desk switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
ST foot switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Standard end machining for nominal diameter < 16 mm . . . . . 119
Standard end machining for nominal diameter 16 mm . . . . . 120
Standard plug & play electromechanical cylinder. . . . . . . . . . . . 265
STD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
STG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
STW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
SVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
SX/BX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
T.
TELEMAG: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
TELEMAG TFG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
TELEMAG TLG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Telescopic pillars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
TELESMART: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
TELESMART TXG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
TO/TS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
TO/TS: principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
TRK/PRK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
TRU/PRU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Type codes for accessories and spare parts:
CAR 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
CAR 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
CAR 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
CAT 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
CAT 33H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
CAT 32B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
W.
WSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
General
About SKF
The SKF Group is one of the leading global
supplier of products, solutions and services
in the area comprising rolling bearings,
seals, mechatronics, services and lubrication
systems. The Groups service offer also
includes technical support, maintenance
services, condition monitoring and training.
The SKF business is organized into
three divisions; Industrial, Automotive
and Service. Each division serves a global
market, focusing on its specific customer
segments.
SKF has 120 manufacturing sites
distributed all over the world and its own
sales companies in 70 countries. SKF is also
represented in 140 countries through some
15 000 distributors and dealers. SKF is
Mechatronics
always close to its customers for the supply
of both products and services.
SKF was founded in 1907 and from
the very beginning focused intensively
on quality, technical development and
marketing. The results of the Groups efforts
in the area of research and development
have led to a growing number of
innovations that has created new standards
and new products in the bearing world.
The Group has a global IS0 14001
environmental certification and global
health and safety management standard
OHSAS 18001 certification. Its operations
have been approved for quality certification
in accordance with either ISO 9000 or
QS9000.
Mechatronics is the science of bringing

together mechanics and electronics into
exciting new solutions. It is a rapidly
advancing area that provides dramatic
opportunity to solve old problems in a
clever and environmentally friend way.
SKF has more than 400 engineers
dedicated to this area.
By being at the forefront of this
technology for many years, SKF has
developed unique application knowledge
in hardware and software. In combining
actuators, bearings, sealing, lubrication,
sensors and electronics competences,
wehave been able to develop a number
of standard and customized solutions.
SKFoffers a wide assortment of
mechatronic products:
Actuation systems
Linear motion
Motion control
Magnetic bearings
1 General
How to get more information

Selecting, defining and purchasing linear
guidings, ball and roller screws and
actuation systems from SKF has never
beenso simple.
www.skf.com
Consult SKFs comprehensive website
for more information on linear motion
and actuation products, together with a
description of our services.
On-line product selection
3D drawings download
PDF catalogues download
Discover our wide range of high precision

components, units and systems for linear
movements, providing solutions for guiding,
driving, actuation and positioning.
CAD files of our products can be accessed

online following some simple steps:
find the right product family from the
product tree, you will be sent to the
product selector and then find the product
designation you want to download.
In addition to this publication we have

all product brochures available as pdf
documents on the internet, ready to be
downloaded.
Linear bearings and units

with SKF factory pre-lubrication
10
About this publication

The encyclopedia of the linear motion
This publication introduces over 260 pages
of information on all the standard products
with clear tables to help the customer select
and order the right solution and correct
product.
How to handle
This publication consists of 4 chapters
divided as follows:
Guiding systems
Driving systems
Actuation systems
Positioning systems
The chapters are arranged from the most
simple, the guiding systems, through to
the most complex, the positioning systems,
which consists of parts of the other
components.
Each linear solution is introduced by a
overview, which makes it easy to select the
right product.
Different subjects are contained in the
separate chapters, starting with a brief
general description followed by the specific
After the type of product has been

identified, in some cases it can be
selected from several items, but
the order is always alphabetical
1
ordering key and the drawings with the data
tables.
If a subject is divided into several
sections, the corresponding ordering key
is located at the beginning of each section,
followed by the pages with tables and
pictures of that section (for example, on
page19 and on page26, there are two
ordering keys for the Linear ball bearings
but they belong to different families:
compact series and standard series).
The composition of the ordering keys
is not unambigous, due to the structural
difference of the products. Instead it follows
the type of the individual product.
To determine the product code to be used
on the order, do the following:
After identifying the type of product
required by examining the relevant pages
containing the main data, it is necessary to
prepare the code for the order. This may
consist of pre-set options, ordering key
boxes already filled in (for example: type,
colour, etc.) and options that can be selected
from several items, empty boxes (for
example: design, bearing, nut type, stroke,
length, etc.).
Selection design type for

element, open (AU) or
closed (BU)
Options,
alphanumeric
identity code of
the required item,
are to be written in
the corresponding
box of the
ordering key
Design:
Open design
Closed design
Nominal diameter
For AU
For BU
Selection value nominal

diameter in mm, see
pages 55-57 for table data
Selection shaft
support type
LZ
Type:
Features
for selection
(highlighted in
bold type)
In the ordering key, the options are set out

under the associated subjects, with the
indication of the code or the information
to be entered (with the measurement
restrictions contained in the associated
table). The sequence of the ordering key is
defined by the thin guiding lines that select
the corresponding box.
The individual ordering key may contain
indications or special notes.
Examples are given at the end of each
ordering key.
In the chapter for the actuators, the
selection of the item's dynamic load/speed
and motor option should be made by use
of an additional table with several options
located above the ordering key.
An example is given below to show how
to prepare the order code for an LZ long
linear table.
AU
BU
in mm:
Other option both

sides sealed fixing
selection
Length of linear
table in mm,
value to be found
in the tables
12 - 50
8 - 50
Option:
LZAU with LRCB shaft supports
LEAS A, high shaft position
LEAS B, low shaft position
no sign
A
B
Other option:
Both sides sealed
-2LS
Length in mm:
Example:
LZ BU
40
-2LS
X 1500
Example of an
ordering key that
has been filled in
11
Light, steady
and always on the run
The hummingbird is not only the
ball bearings which are capable of
worlds smallest bird, but it is also the
accommodating loads with the greatest
most stable, thanks to the incredible
efficiency.
speed of its wings (eighty pulsations

per second) that allow it to be
suspended in flight, so allowing itself to
feed on the delicious nectar from many
of the flowers in Latin America.
Lightness and stability are among
the features that have given SKF the
inspiration to create lightweight linear
12
The potential derived from such

lightness is truly impressive.
Guiding systems
2
Fig.1
Fig.2
Fig.3
Fig.4
Linear ball bearings (fig.1), profile rail

guides (fig.2), miniature profile rail guides
(fig.3), precision rail guides (fig.4): limited
stroke, very high precision and performance
capabilities.
Operating precision (table1)

Comparison of the different positioning
components and systems.
Table 1
Positioning
systems
Standard drives or linear motors

with all guiding systems
Linear motors
Roller screws
Actuation
systems
Electro-mechanical
actuators
100-1 000
Ball screws
10-100
Linear ball bearings
1-10
Profile rail guides
0,1-1
Driving systems
Standard slides
Guiding systems
Precision rail guides
Operating
precision (m)
13
2 Guiding systems
Shaft guidings
Shaft guidings
Fig.5
Fig.6
Linear ball bearings (fig.5, 6 and 7) are

bushings with recirculating ball tracks
which provide low friction movement and
the possibility of unlimited stroke. With the
range of linear ball bearings, plain bearings
and accessories, it is possible to design and
build economical and simple linear guidance
systems to suit a wide range of applications.
The bearings are available in two size
ranges: the compact ISO 1 series and the
heavy duty standard ISO 3 series (table2).
Fig.7
N.B.:
SKF linear ball bearings and units for
shaft diameter 6 mm and greater are
factory prelubricated by default1).
1)
linear ball bearings without factory pre-lubrication

andpreservative only can be ordered by using the suffix
/VT808, e.g. LBCR 20 A-2LS/VT808.
Table 2
Basic dynamic
load rating
Type

Compact
Standard
Linear plain bearings

Compact
Standard
LBBR
LBCR
LBCD
LBCT
LBCF
LBHT
30
30
LPBR
LPAR
LPAT
Shafts
LJM
LJMH
LJMR
LJT
LJMS
14
Standard CF 53
Hard cromium plated
Corrosion resistant
Hollow
Corrosion resistant
Stiffness
Speed
Precision
Compact series
LBBR
Compact linear ball bearings available in
standard or corrosion resistant versions.
LUHR / LUJR
Linear ball bearing units with either integral
seals or G-type seals mounted in the
housing.
LTDR
Duo linear ball bearing units with seals.
LQBR
Quadro linear ball bearing units with seals.
LTBR
Tandem linear ball bearing units with seals.
LSHS
Shaft blocks for compact series.
LEBS and LEAS
Tandem shaft blocks suitable for LQBR and
LQCD.
15
2 Guiding systems
Shaft guidings
Standard series
LBCR
Closed linear ball bearings without
self-aligning feature.
LBCD
Self-aligning linear ball bearings, closed
type.
LUCD / LUCE
Self-aligning linear ball bearing units with
adjustable preload.
LBCT
Open linear ball bearings, not self-aligning.
LBCF
Self-aligning linear ball bearings, open type.
LUCF
Open self-aligning linear ball bearing units
with adjustable preload.
LUND / LUNE
Self-aligning linear ball bearing units with
adjustable preload
LTCD / LTCF
Open or closed self-aligning tandem linear
ball bearing units.
LBHT
Heavy-load linear ball bearings, open type.
N.B.:
All LBC and LBH Linear ball bearings
available in corrosion resistant!
LUCT / BH
Heavy-load linear ball bearing units with
adjustable preload.
LUNF
Self-aligning linear ball bearing units, open
type with adjustable preload.
16
LQCD / LQCF
Open or closed self-aligning quadro linear
ball bearing units.
LVCR
Flanged linear ball bearing units.
LSCS
Standard shaft blocks suitable for use with
all linear bearing units.
LSNS
Shaft blocks suitable for use with all linear
bearing units.

N.B.:
In addition to this catalogue, all product
brochures are available on www.skf.com
as PDF files.
Publication nr. 4182 EN
17
2 Guiding systems
Shaft guidings
Table3
Type
Size
Max load
dynamic
mm
LBBR
LBCR
LBCD
LBCT
LBCF
LBHT
LPBR
LPAR
LPAT
3 to 50
5 to 80
12 to 50
12 to 80
12 to 50
20 to 50
12 to 50
5 to 80
12 to 80
6 950
37 500
11 200
37 500
11 200
17 300
10 800
29 000
29 000
6 300
32 000
6 950
32 000
6 950
17 000
38 000
100 000
100 000
Linear bearing units

LUHR
LUJR
LTBR
LTDR
LQBR
LUCR
LUCD
LUCS
LUCE
LUCT
LUCF
LUCT BH
LUND
LUNE
LUNF
LVCR
LTCD
LTCF
LQCR
LQCD
LQCF
12 to 50
12 to 50
12 to 50
12 to 50
12 to 50
8, 60, 80
12 to 50
8, 60, 80
12 to 50
60, 80
12 to 50
20 to 50
12 to 50
12 to 50
12 to 50
12 to 80
12 to 50
12 to 50
8
12 to 50
12 to 50
6 950
6 950
11 400
11 400
18 600
37 500
11 200
37 500
11 200
37 500
11 200
17 300
11 200
11 200
11 200
37 500
18 300
18 300
1 290
30 000
30 000
6 300
6 300
12 700
12 700
25 500
32 000
6 950
32 000
6 950
32 000
6 950
17 000
6 950
6 950
6 950
32 000
14 000
14 000
1 420
28 000
28 000
Shaft blocks
LSCS
LSHS
LSNS
LEBS A
8 to 80
12 to 50
12 to 50
12 to 50
LEAS A/B
static
Comments
ISO serie
Self-aligning*
1
3
3
3
3
3
1
3
3
LBBR bearing
With shaft seals LBBR bearing
Tandem LBBR bearing
Duo LBBR bearing
Quadro LBBR bearing
LBCR bearing
LBCD bearing self-aligning*
LBCR bearing
LBCT bearing
LBCF bearing self-aligning*
LBHT bearing
LBCF bearing self-aligning*
LBCR bearing
Tandem LBCD bearing self-aligning*
Tandem LBCF bearing self-aligning*
Quadro LBCR bearing
Quadro LBCD bearing self-aligning*
Quadro LBCF bearing self-aligning*
1
1
1
1
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
3
8 to 50
LSHS
LSNS
Tandem
LEBS A
LEAS A/B
Shafts and shaft supports

LJ
LRCB
LRCC
3 to 80
12 to 80
12 to 80
LRCB (holes)
LRCC (no holes)
Linear tables
LZAU
12 to 50
LZBU A
8 to 50
LZBU B
8 to 50
Quadro supported shaft

LBCF bearing
Quadro A = moving unit
A = moving unit
B = moving shafts
LBCD bearing
* Automatic compensation of shaft misalignments of up to max. 30 angular minutes
Linear ball bearings/Linear bearing units
18
Self-aligning*
1
3
Ordering key
B R
-2LS/HV6
Type:
Bearing, units, shaft blocks:
Linear plain bearing
Linear ball bearing
Single unit, closed design
Tandem or duo unit
Quadro unit
Shaft block
Tandem shaft block
P
B
U
T
Q
S
E
Design (for seals on side see table at end page):

For P (12 - 50)
For B Closed design (3 - 50)

e Non standard (12 - 50)

a Non standard (12 - 50)

a Standard (12 - 50)
For U d With shaft seals (12 - 50)

a Self-aligning, clearance adjustable, closed design, relubricatable (12- 50)

a Self-aligning, closed design, relubricatable (12 - 50)

x Self-aligning, clearance adjustable, closed design, relubricatable (12- 50)
For T (12 - 50); tandem unit

(12 - 50); duo unit
For Q (12 - 50)
For S (12 - 50)
For E (12 - 50)
BR
BR
BR
ER
HR
JR
CE
ND
NE
BR
DR
BR
HS
BS
Nominal diameter:
in mm
Option(s):
Without seals
One side sealed
Both sides sealed
Only valid for LBBR:
Without seals, corrosion resistant
One side sealed, corrosion resistant
Both sides sealed, corrosion resistant
Only valid for LUBR, LUHR
Only valid for LEBS
no sign
-LS
2-LS
/HV6
-LS/HV6
-2LS/HV6
PB
A
Only valid for LBBR:

Cassettes of 4 pieces for LBBR 3 - 5 only!
(CAS4)
Lubrication option:
Only preservative, no pre-lubrication ( 6 - 50)
/VT808
Example:
Seals on
side(s)
LPBR
LBBR
LUBR
LUER
LUHR
LUJR
LUCE
B R
LUND
LUNE
-2LS/HV6
LTBR
LTDR
LQBR
LSHS
LEBS
No
One
Both
Other options
/HV6
PB
PB
19
2 Guiding systems
Shaft guidings compact series
LBBR ..
Compact series 1
LBBR (without seals)
-LS with one seal
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
D
mm
LBBR 3 (CAS4)*
LBBR 4 (CAS4)*
LBBR 5 (CAS4)*
LBBR 6A
LBBR 8
LBBR 10
LBBR 12
LBBR 14
LBBR 16
LBBR 20
LBBR 25
LBBR 30
LBBR 40
LBBR 50
3
4
5
6
8
10
12
14
16
20
25
30
40
50
C0
N
7
8
10
12
15
17
19
21
24
28
35
40
52
62
10
12
15
221)
24
26
28
28
30
30
40
50
60
70
60
75
170
335
490
585
695
710
930
1 160
2 120
3 150
5 500
6 950
44
60
129
270
355
415
510
530
630
800
1 560
2 700
4 500
6 300
Example:
LBBR 4 (CAS4)
LBBR 20-LS
LBBR 50-2LS
* Without seal, 4 pieces, packed in cassette (only valid for sizes 3, 4, 5)
1)
Width 22 does not correspond to series 1 in ISO standard 10285
LBBR .. /HV6
Compact series 1
Corrosion resistant bearings
/HV6 without seals
-2LS/HV6 with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
D
mm
LBBR 3/HV6 (CAS 4)*
LBBR 4/HV6 (CAS 4)*
LBBR 5/HV6 (CAS 4)*
LBBR 6A/HV6
LBBR 8/HV6
LBBR 10/HV6
LBBR 12/HV6
LBBR 14/HV6
LBBR 16/HV6
LBBR 20/HV6
LBBR 25/HV6
LBBR 30/HV6
LBBR 40/HV6
LBBR 50/HV6
3
4
5
6
8
10
12
14
16
20
25
30
40
50
C0
N
7
8
10
12
15
17
19
21
24
28
35
40
52
62
Example:
LBBR 4/HV6 (CAS4)
LBBR 50-2LS/HV6
* Without seal, 4 pieces, packed in cassette (only valid for sizes 3, 4, 5)

1)
Width 22 does not correspond to series 1 in ISO standard 10285
20
10
12
15
221)
24
26
28
28
30
30
40
50
60
70
60
75
170
335
490
585
695
710
930
1 160
2 120
3 150
5 500
6 950
44
60
129
270
355
415
510
530
630
800
1 560
2 700
4 500
6 300
LPBR
Linear plain bearings
Designations
Dimensions
Fw
Basic load ratings

dynamic
C
C4
mm
LUHR ..
Linear ball bearing units
A
LUHR (without seals)
-2LS with 2 seals
12
16
20
25
30
40
50
Designations
Dimensions
Fw
Fw
19,19
24,23
28,24
35,25
40,27
52,32
62,35
28
30
30
40
50
60
70
10
12
13
17
20
24
27
965
1 530
2 080
3 400
4 800
7 650
10 800
LUHR 12
LUHR 16
LUHR 20
LUHR 25
LUHR 30
LUHR 40
LUHR 50
12
16
20
25
30
40
50
C0
24
38
52
85
120
193
270
3 350
5 400
7 350
12 000
17 000
27 000
38 000
Basic load ratings

dynamic static
C
H
0,01
H1
mm
C
4 m/s
LPBR 12
LPBR 16
LPBR 20
LPBR 25
LPBR 30
LPBR 40
LPBR 50
Fw
C
0,1 m/s
static
C0
N
28
30
30
40
50
60
70
17
19
23
27
30
39
47
33
38
45
54
60
76
92
40
45
53
62
67
87
103
695
930
1 160
2 120
3 150
5 500
6 950
510
630
800
1 560
2 700
4 500
6 300
Example:
LUHR 16
LUHR 30-2LS
21
2 Guiding systems
LUHR .. PB
Linear plain bearing units without seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
H
0,01
H1
mm
C
4 m/s
C0
24
38
52
85
120
193
270
3 350
5 400
7 350
12 000
17 000
27 000
38 000
LUHR 12 PB
LUHR 16 PB
LUHR 20 PB
LUHR 25 PB
LUHR 30 PB
LUHR 40 PB
LUHR 50 PB
12
16
20
25
30
40
50
Designations
Dimensions
28
30
30
40
50
60
70
17
19
23
27
30
39
47
33
38
45
54
60
76
92
40
45
53
62
67
87
103
965
1 530
2 080
3 400
4 800
7 650
10 800
A1
LUJR
Linear ball bearing units with shaft seals
Fw
A1
Fw
Basic load ratings

dynamic
static
H
0,01
H1
mm
Fw
22
C
0,1 m/s
static
LUJR 12
LUJR 16
LUJR 20
LUJR 25
LUJR 30
LUJR 40
LUJR 50
12
16
20
25
30
40
50
C0
N
35
37
39
49
59
71
81
17
19
23
27
30
39
47
33
38
45
54
60
76
92
40
45
53
62
67
87
103
695
930
1 160
2 120
3 150
5 500
6 950
510
630
800
1 560
2 700
4 500
6 300
LTBR ..
A
Tandem linear ball bearing units
LTBR (without seals)
-2LS with two seals
Designations
Fw
Fw
Basic load ratings

dynamic
static
H
0,01
H1
mm
Fw
Dimensions
LTBR 12
LTBR 16
LTBR 20
LTBR 25
LTBR 30
LTBR 40
LTBR 50
C0
12
16
20
25
30
40
50
60
65
65
85
105
125
145
17
19
23
27
30
39
47
33
38
45
54
60
76
92
40
45
53
62
67
87
103
1 140
1 530
1 900
3 450
5 200
9 000
11 400
1 020
1 270
1 600
3 150
5 400
9 000
12 700
Example:
LTBR 16
LTBR 30-2LS
LSHS
Shaft block for compact series
Designations
Dimensions
Fw
H
0,01
H2
18
20
24
28
30
40
50
19
22
25
31
34
42
50
33
38
45
54
60
76
92
40
45
53
62
67
87
103
mm
LSHS 12
LSHS 16
LSHS 20
LSHS 25
LSHS 30
LSHS 40
LSHS 50
12
16
20
25
30
40
50
23
2 Guiding systems
LTDR
Duo linear ball bearing units
LTDR (without seals)
-2LS with four seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H1
L1
mm
LTDR 12
LTDR 16
LTDR 20
LTDR 25
LTDR 30
LTDR 40
LTDR 50
FFww
12
16
20
25
30
40
50
C0
N
28
30
30
40
50
60
70
15
17.5
20
25
28
35
40
30
35
40
50
56
70
80
80
96
115
136
146
184
210
40
52
63
75
80
97
107
1 140
1 530
1 900
3 450
5 200
9 000
11 400
1 020
1 270
1 600
3 150
5 400
9 000
12 700
Example:
LTDR 12
LTDR 25-2LS
LQBR
Quadro linear ball bearing units
LQBR (without seals)
A
Designations
Fw
Fw
LQBR 12
LQBR 16
LQBR 20
LQBR 25
LQBR 30
LQBR 40
LQBR 50
Example:
LQBR 40
LQBR 30-2LS
24
Basic load ratings

dynamic
static
H
0,01
H1
L1
mm
Fw
Dimensions
12
16
20
25
30
40
50
C0
N
70
80
85
100
130
150
175
15
17.5
20
25
28
35
40
30
35
40
50
56
70
80
80
96
115
136
146
184
210
40
52
63
75
80
97
107
1 860
2 500
3 100
5 600
8 500
14 600
18 600
2 040
2 550
3 200
6 300
10 800
18 000
25 500
LEBS
Tandem shaft blocks suitable for LQBR and
LTDR
Designations
Dimensions
Da
HA
0,01
H1
L1
15
15
18
20
20
25
30
17
19,5
22
27
31
38
43
30
35
40
50
56
70
80
80
96
115
136
146
184
210
40
52
63
75
80
97
107
mm
Appropriate special seals
LEBS 12 A
LEBS 16 A
LEBS 20 A
LEBS 25 A
LEBS 30 A
LEBS 40 A
LEBS 50 A
12
16
20
25
30
40
50
Designations
Dimensions
Fw
B1
22
15
17
19
21
24
28
35
40
52
62
2
3
3
3
3
3
4
4
4
5
5
mm
SP-6122
SP-8153
SP-10173
SP-12193
SP-14213
SP-16243
SP-20284
SP-25354
SP-30404
SP-40525
SP-50625
6
8
10
12
14
16
20
25
30
40
50
25
2 Guiding systems
Shaft guidings standard series
Ordering key
Type
Linear ball bearing
Single unit
Flanged unit
Tandem unit
Quadro unit
Shaft block
Tandem shaft block
Shaft support
P
B
U
V
T
Q
S
E
R

Closed design (5 - 80)
For P
Open design (12 - 80)

e Self-aligning, closed design (12 - 50)

a Self-aligning, open design (12 - 50)
For B* d Closed design (5 - 80)

a Open design (12 - 80)

x Heavy load, open design (20 - 50)

e Self-aligning, closed design, relubricatable (12 - 50)

a Self-aligning, radial adjustable, slotted design, relubricatable (12 - 50)

a Self-aligning, clearance adjustable, open design, relubricatable (12 - 50)

a Closed design, (relubricatable) (8 - 80)
For U d Clearance adjustable, closed design, relubricatable (8 - 80)

a Clearance adjustable, open design, relubricatable (12 - 80)

a Self-aligning, clearance adjustable, closed design, relubricatable (12 - 50)

a Self-aligning, clearance adjustable, slotted design, relubricatable (12 - 50)

x Self-aligning, clearance adjustable, open design, relubricatable (12 - 50)
AR
AT
CD
CF
CR
CT
HT
CD
CE
CF
CR
CS
CT
ND
NE
NF
Nominal diameter:
in mm
New bearing series* (for linear ball bearings only)
Option(s):
Without seals
One side sealed
Both sides sealed

e Without seals, corrosion resistant (for linear ball bearings only)
For B* d One side sealed, corrosion resistant (for linear ball bearings only)

x Both sides sealed, corrosion resistant (for linear ball bearings only)
no sign
-LS
-2LS
/HV6
-LS/HV6
-2LS/HV6
Other option:
Only valid for LUCR, LUCT:
With plain bearing, without seals
Only valid for LUCT:
With heavy-load bearing, without seals
With heavy-load bearing, both sides sealed
Only valid for LEAS:
Tandem shaft block, high shaft position
Tandem shaft block, low shaft position
PA
BH
BH-2LS
A
B
Lubrication option:
only preservative, no pre-lubrication ( 6 - 50)
/VT808
Example:
Seals on
side(s)
C T 30
BH-2LS
LPAR
LPAT
LBCD
LBCF
LBCR
LBCT
LBHT
LUCD
LUCE
LUCF
LUCR
LUCS
LUCT
LUND
LUNE
LUNF
No
One
Both
BH
or PA
Other options
26
PA
Ordering key (Continued)
Type
Linear ball bearing
Single unit
Flanged unit
Tandem unit
Quadro unit
Shaft block
Tandem shaft block
Shaft support
P
B
U
V
T
Q
S
E
R

Self-aligning, closed design (12 - 50)
For V
Closed design (12 - 80)


a Self-aligning, open design, relubricatable (12 - 50)
For T d Closed design, relubricatable (12 - 50)

x Open design, relubricatable (12 - 50)

Self-aligning, open design, relubricatable (12 - 50)
For Q d

a Closed design, relubricatable (8 - 50)

x Open design, relubricatable (12 - 50)
For S (8 - 80)

(12 - 50)
For E (8 - 50)
Without bore holes (12 - 80)
For R
With bore holes (12 - 80)
CD
CR
CD
CF
CR
CT
CD
CF
CR
CT
CS
NS
AS
CB
CC
Nominal diameter:
in mm
Option(s):
Without seals
One side sealed
Both sides sealed
no sign
-LS
-2LS
Other option:
Only valid for LUCR, LUCT:
With plain bearing, without seals
Only valid for LUCT:
With heavy-load bearing, without seals
With heavy-load bearing, both sides sealed
Only valid for LEAS:
Tandem shaft block, high shaft position
Tandem shaft block, low shaft position
PA
BH
BH-2LS
A
B
Lubrication option:
only preservative, no pre-lubrication ( 6 - 50)
/VT808
Example:
Seals on
side(s)
LVCD
LVCR
LTCD
LTCF
LTCR
LTCT
LQCD
LQCF
LQCR
LQCT
C R 16
LSCS
LSNS
-2LS
LEAS
LRCB
LRCC
LUNF
No
One
Both
B
or A
Other options
27
2 Guiding systems
Shaft guidings standard series, closed types
LBCD ..
Standard series 3
Linear ball bearings self-aligning, closed
type
LBCD ..A (without seals)
-LS with one seal
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
D
C3
mm
LBCD 12 A
LBCD 16 A
LBCD 20 A
LBCD 25 A
LBCD 30 A
LBCD 40 A
LBCD 50 A
12
16
20
25
30
40
50
C0
N
22
26
32
40
47
62
75
32
36
45
58
68
80
100
20
22
28
40
48
56
72
1 080
1 320
2 000
2 900
4 650
7 800
11 200
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LBCD 25 A
LBCD 16 A-LS
LBCD 40 A-2LS
LBCR ..
Standard series 3
Linear ball bearings, closed type
LBCR .. A (without seals)
-LS with one seal
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
D
C3
mm
LBCR 5 A
LBCR 8 A
LBCR 12 A
LBCR 16 A
LBCR 20 A
LBCR 25 A
LBCR 30 A
LBCR 40 A
LBCR 50 A
LBCR 60 A
LBCR 80 A
5
8
12
16
20
25
30
40
50
60
80
C0
N
22
16
22
26
32
40
47
62
75
90
120
22
25
32
36
45
58
68
80
100
125
165
12
14
20
22
28
40
48
56
72
95
125
280
490
1 160
1 500
2 240
3 350
5 600
9 000
13 400
20 400
37 500
210
355
980
1 290
2 040
3 350
5 700
8 150
12 200
18 000
32 000
Example:
LBCR 30 A
LBCR 80 A-LS
LBCR 60 A-2LS
N.B.:
All LBC.. A and LBH .. A Linear ball
bearings available in corrosion resistant!
28
LPAR ..
Linear plain bearings without seals, closed
type
Designations
Dimensions
Fw
Basic load ratings

dynamic
C3
C
0,1 m/s
mm
LPAR 5
LPAR 8
LPAR 12
LPAR 16
LPAR 20
LPAR 25
LPAR 30
LPAR 40
LPAR 50
LPAR 60
LPAR 80
LUCD ..
Single units, self-aligning, closed type,
relubricatable
LUCD (without seals)
-2LS with two seals
Designations
22
16
22
26
32
40
47
62
75
90
120
22
25
32
36
45
58
68
80
100
125
165
12
14
20
22
28
40
48
56
72
95
125
280
510
965
1 530
2 400
4 000
5 500
8 000
12 000
16 600
290 000
Dimensions
12
16
20
25
30
40
50
C0
7
13
24
38
60
100
137
200
300
415
720
980
1 800
3 350
5 400
8 300
14 000
19 300
28 000
41 500
60 000
100 000
Basic load ratings

dynamic
static
H
0,01
H2
mm
LUCD 12
LUCD 16
LUCD 20
LUCD 25
LUCD 30
LUCD 40
LUCD 50
C
4 m/s
5
8
12
16
20
25
30
40
50
60
80
Fw
static
C0
N
32
36
45
58
68
80
100
18
22
25
30
35
45
50
34.5
40.5
48
58
67
85
99
52
56
70
80
88
108
135
1 080
1 320
2 000
2 900
4 650
7 800
11 200
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LUCD 40
LUCD 12-2LS
29
2 Guiding systems
LUCE ..
Single units, self-aligning, clearance
adjustable, closed type, relubricatable
LUCE (without seals)
Designations
Dimensions
Fw
-2LS with two seals
Basic load ratings

dynamic
static
H
0,01
H2
mm
LUCE 12
LUCE 16
LUCE 20
LUCE 25
LUCE 30
LUCE 40
LUCE 50
12
16
20
25
30
40
50
C0
32
36
45
58
68
80
100
18
22
25
30
35
45
50
34,5
40,5
48
58
67
85
99
52
56
70
80
88
108
135
1 080
1 320
2 000
2 900
4 650
7 800
11 200
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LUCE 25
LUCE 50-2LS
LUCR ..
Single units, closed type, relubricatable
LUCR (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H2
mm
LUCR 8*
LUCR 12
LUCR 16
LUCR 20
LUCR 25
LUCR 30
LUCR 40
LUCR 50
LUCR 60
LUCR 80
8
12
16
20
25
30
40
50
60
80
C0
N
25
32
36
45
58
68
80
100
125
165
15
18
22
25
30
35
45
50
60
80
28
34,5
40,5
48
58
67
85
99
118
158
45
52
56
70
80
88
108
135
560
205
365
1 080
1 320
2 000
2 900
4 650
7 800
11 200
20 400
37 500
285
815
865
1 370
2 040
3 250
5 200
6 950
18 000
32 000
Example:
LUCR 80
LUCR 8-2LS
* Linear ball bearings fitted to these units are secured with snap rings according to DIN 471 and cannot be relubricated.
30
LUCR .. PA
Single plain bearing units without seals,
closed type
Designations
Dimensions
Fw
Basic load ratings

dynamic
H
0,01
H2
mm
LUCR 8 PA
LUCR 12 PA
LUCR 16 PA
LUCR 20 PA
LUCR 25 PA
LUCR 30 PA
LUCR 40 PA
LUCR 50 PA
LUCR 60 PA
LUCR 80 PA
8
12
16
20
25
30
40
50
60
80
C
0,1 m/s
static
C
4 m/s
C0
13
24
38
60
100
137
200
300
415
720
1 800
3 350
5 400
8 300
14 000
19 300
28 000
41 500
60 000
100 000
N
25
32
36
45
58
68
80
100
125
165
15
18
22
25
30
35
45
50
60
80
28
34,5
40,5
48
58
67
85
99
118
158
45
52
56
70
80
88
108
135
160
205
510
965
1 530
2 400
4 000
5 500
8 000
12 000
16 600
29 000
Delivery time on request
LUCS ..
Single units, clearance adjustable, closed
type, relubricatable
LUCS (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H2
mm
LUCS 8*
LUCS 12
LUCS 16
LUCS 20
LUCS 25
LUCS 30
LUCS 40
LUCS 50
LUCS 60
LUCS 80
8
12
16
20
25
30
40
50
60
80
C0
N
25
32
36
45
58
68
80
100
125
165
15
18
22
25
30
35
45
50
60
80
28
34,5
40,5
48
58
67
85
99
118
158
45
52
56
70
80
88
108
135
160
205
490
1 160
1 500
2 240
3 350
5 600
9 000
13 400
20 400
37 500
355
980
1 290
2 040
3 350
5 700
8 150
12 200
18 000
32 000
Example:
LUCS 50
LUCS 60-2LS
* Linear ball bearings fitted to these units are secured with snap rings according to DIN 471 and cannot be relubricated.
31
2 Guiding systems
LUND ..
Single units, self-aligning, closed type,
relubricatable
LUND (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H1
mm
LUND 12
LUND 16
LUND 20
LUND 25
LUND 30
LUND 40
LUND 50
12
16
20
25
30
40
50
C0
N
32
37
45
58
68
80
100
18
22
25
30
35
45
50
35
42
50
61
70
90
105
43
53
60
78
87
108
132
1 080
1 320
2 000
2 900
4 650
7 800
11 200
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LUND 12
LUND 30-2LS
LUNE ..
adjustable, closed type, relubricatable
LUNE (without seals)
-2LS with two seals
Designations
Fw
Basic load ratings

dynamic
static
H
0,01
H1
mm
LUNE 12
LUNE 16
LUNE 20
LUNE 25
LUNE 30
LUNE 40
LUNE 50
Example:
LUNE 40
LUNE 16-2LS
32
Dimensions
12
16
20
25
30
40
50
C0
N
32
37
45
58
68
80
100
18
22
25
30
35
45
50
35
42
50
61
70
90
105
43
53
60
78
87
108
132
1 080
1 320
2 000
2 900
4 650
7 800
11 200
815
865
1 370
2 040
3 250
5 200
6 950
LVCD ..
Flanged self-aligning units
LVCD (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
C
D2
mm
LVCD 12
LVCD 16
LVCD 20
LVCD 25
LVCD 30
LVCD 40
LVCD 50
12
16
20
25
30
40
50
C0
N
20
22
28
40
48
56
72
32
36
45
58
68
80
100
42
50
60
74
84
108
130
32
38
46
58
66
90
110
1 080
1 320
2 000
2 900
4 650
7 800
11 200
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LVCD 12
LVCD 30-2LS
LVCR ..
Flanged units
LVCR (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
C
D2
mm
LVCR 12
LVCR 16
LVCR 20
LVCR 25
LVCR 30
LVCR 40
LVCR 50
LVCR 60
LVCR 80
12
16
20
25
30
40
50
60
80
C0
N
20
22
28
40
48
56
72
95
125
32
36
45
58
68
80
100
125
165
42
50
60
74
84
108
130
160
200
32
38
46
58
66
90
110
135
180
1 160
1 500
2 240
3 350
5 600
9 000
13 400
20 400
37 500
980
1 290
2 040
3 350
5 700
8 150
12 200
18 000
32 000
Example:
LVCR 20
LVCR 60-2LS
Delivery time on request
33
2 Guiding systems
LSCS
Shaft blocks
Designations
Dimensions
Fw
H
0,01
H2
10
12
15
20
28
30
36
49
62
85
15
20
20
25
30
35
45
50
60
80
25
32,5
35,5
43,5
53
63
81
92,5
112
147,5
45
52
56
70
80
88
108
135
160
205
H
0,01
H2
20
24
30
38
40
48
58
20
25
30
35
40
50
60
35
42
50
61
70
90
105
43
53
60
78
87
108
132
mm
LSNS
Shaft blocks
LSCS 8
LSCS 12
LSCS 16
LSCS 20
LSCS 25
LSCS 30
LSCS 40
LSCS 50
LSCS 60
LSCS 80
8
12
16
20
25
30
40
50
60
80
Designations
Dimensions
Fw
mm
LSNS 12
LSNS 16
LSNS 20
LSNS 25
LSNS 30
LSNS 40
LSNS 50
34
12
16
20
25
30
40
50
LTCD ..
Tandem units, self-aligning, closed type,
relubricatable
LTCD (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H1
mm
LTCD 12
LTCD 16
LTCD 20
LTCD 25
LTCD 30
LTCD 40
LTCD 50
12
16
20
25
30
40
50
C0
N
76
84
104
130
152
176
224
18
22
25
30
35
45
50
35
41,5
49,5
59,5
69,5
89,5
99,5
42
50
60
74
84
108
130
1 760
2 160
3 200
4 750
7 500
12 700
18 300
1 630
1 730
2 750
4 150
6 550
10 400
14 000
Example:
LTCD 30
LTCD 12-2LS
LTCR ..
Tandem units, closed type, relubricatable
LTCR (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H1
mm
LTCR 12
LTCR 16
LTCR 20
LTCR 25
LTCR 30
LTCR 40
LTCR 50
12
16
20
25
30
40
50
C0
N
76
84
104
130
152
176
224
18
22
25
30
35
45
50
35
41,5
49,5
59,5
69,5
89,5
99,5
42
50
60
74
84
108
130
1 900
2 450
3 650
5 500
9 150
15 000
22 000
1 960
2 600
4 150
6 700
11 400
16 300
24 500
Example:
LTCR 50
LTCR 20-2LS
35
2 Guiding systems
LQCD ..
Quadro units, self-aligning, closed type,
relubricatable
LQCD (without seals)
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H1
C
0,1 m/s
mm
LQCD 12
LQCD 16
LQCD 20
LQCD 25
LQCD 30
LQCD 40
LQCD 50
C0
12
16
20
25
30
40
50
32
36
45
58
68
80
100
16
18
23
28
32
40
48
32
36
46
56
64
80
96
85
100
130
160
180
230
280
2 850
3 450
5 200
7 650
12 200
20 800
30 000
3 250
3 450
5 500
8 150
12 900
20 800
28 000
Example:
LQCD 40
LQCD 16-2LS
LQCR ..
Quadro units, closed type, relubricatable
LQCR (without seals)
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
0,01
H1
L1
mm
LQCR 8
LQCR 12
LQCR 16
LQCR 20
LQCR 25
LQCR 30
LQCR 40
LQCR 50
Example:
LQCR 25
LQCR 12-2LS
36
8
12
16
20
25
30
40
50
C0
N
25
32
36
45
58
68
80
100
11,5
16
18
23
28
32
40
48
23
32
36
46
56
64
80
96
65
85
100
130
160
180
230
280
32
42
54
72
88
96
122
152
1 290
3 100
4 000
6 000
9 000
14 800
23 800
35 400
1 420
4 000
5 200
8 300
13 400
22 800
32 600
48 800
LEAS ..
Tandem shaft blocks, closed type, suitable
for LQCD / LQCR
LEAS .. A high shaft position
Designations
Dimensions
for types A and B
da
for type A
L
L1
mm
LEAS 8
LEAS 12
LEAS 16
LEAS 20
LEAS 25
LEAS 30
LEAS 40
LEAS 50
8
12
16
20
25
30
40
50
HA
0,015
for type B
H1A
HB
0,015
H1B
23
32
37
46
56
64
80
96
11
14
17
21
26
29
36
44
22
28
34
42
52
58
72
88
N
12
15
18
20
25
25
30
30
65
85
100
130
160
180
230
280
32
42
54
72
88
96
122
152
12,5
18
20
25
30
35
44
52
Example:
LEAS 50 A
LEAS 30 B
LEAS .. B low shaft position
37
2 Guiding systems
Shaft guidings standard series, open types
LBCF ..
Standard series 3
Linear ball bearings, self-aligning, open
type
LBCF..A (without seals)
-LS with one seal
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic static
C
C3
mm
LBCF 12 A
LBCF 16 A
LBCF 20 A
LBCF 25 A
LBCF 30 A
LBCF 40 A
LBCF 50 A
12
16
20
25
30
40
50
22
26
32
40
47
62
75
32
36
45
58
68
80
100
20
22
28
40
48
56
72
7,6
10,4
10,8
13,2
14,2
18,7
23,6
deg.
78
78
60
60
50
50
50
1 080
1 320
2 000
2 900
4 650
7 800
11 200
C0
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LBCF40 A
LBCF 25 A-LS
LBCF 16 A-2LS
LBCT ..
Standard series 3
Linear ball bearings, open type
LBCT.. A (without seals)
-LS with one seal
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic static
C
C3
mm
LBCT 12 A
LBCT 16 A
LBCT 20 A
LBCT 25 A
LBCT 30 A
LBCT 40 A
LBCT 50 A
LBCT 60 A
LBCT 80 A
12
16
20
25
30
40
50
60
80
22
26
32
40
47
62
75
90
120
32
36
45
58
68
80
100
125
165
20
22
28
40
48
56
72
95
125
7,6
10,4
10,8
13,2
14,2
18,7
23,6
29,6
38,4
deg.
78
78
60
60
50
50
50
54
54
1 160
1 500
2 240
3 350
5 600
9 000
13 400
20 400
37 500
C0
980
1 290
2 040
3 350
5 700
8 150
12 220
18 000
32 000
Example:
LBCT 20 A
LBCT 80 A-LS
LBCT 50 A-2LS
N.B.:
38
LBHT ..
Standard series 3
Heavy-load linear ball bearings, open type
LBHT.. A (without seals)
-LS with one seal
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic static
C3
mm
LBHT 20 A
LBHT 25 A
LBHT 30 A
LBHT 40 A
LBHT 50 A
20
25
30
40
50
32
40
47
62
75
45
58
68
80
100
28
40
48
56
72
10,8
13,2
14,2
18,7
23,6
deg.
60
60
50
50
50
2 650
4 900
7 200
11 600
17 300
C0
2 650
5 100
8 000
11 400
17 000
Example:
LBHT 40 A
LBHT 25 A-LS
LBHT 20 A-2LS
LPAT ..
Linear plain bearings, without seals, open
design
Designations
Dimensions
Fw
Basic load ratings

dynamic
C
C3
mm
LPAT 12
LPAT 16
LPAT 20
LPAT 25
LPAT 30
LPAT 40
LPAT 50
LPAT 60
LPAT 80
12
16
20
25
30
40
50
60
80
C
0,1 m/s
static
C
4 m/s
C0
24
38
60
100
137
200
300
415
720
3 350
5 400
8 300
14 000
19 300
28 000
41 500
60 000
100 000
N
22
26
32
40
47
62
75
90
120
32
36
45
58
68
80
100
125
165
20
22
28
40
48
56
72
95
125
7,6
10,4
10,8
13,2
14,2
18,7
23,6
29,6
38,4
78
78
60
60
50
50
50
54
54
965
1 530
2 400
4 000
5 500
8 000
12 000
16 600
29 000
N.B.:
39
2 Guiding systems
LUCF ..
adjustable, open type, relubricatable
LUCF (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic static
H
H2
0,01
mm
LUCF 12
LUCF 16
LUCF 20
LUCF 25
LUCF 30
LUCF 40
LUCF 50
12
16
20
25
30
40
50
32
36
45
58
68
80
100
18
22
25
30
35
45
50
28
35
42
51
60
77
88
52
56
70
80
88
108
135
7,6
10,4
10,8
13,2
14,2
18,7
23,6
deg.
78
78
60
60
50
50
50
1 080
1 320
2 000
2 900
4 650
7 800
11 200
C0
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LUCF 16
LUCF 30-2LS
LUCT ..
Single units, clearance adjustable, open
type, relubricatable
LUCT (without seals)
-2LS with two seals
Designations
Fw
Basic load ratings

dynamic static
H
H2
0,01
mm
LUCT 12
LUCT 16
LUCT 20
LUCT 25
LUCT 30
LUCT 40
LUCT 50
LUCT 60
LUCT 80
Example:
LUCT 60
LUCT 80-2LS
40
Dimensions
12
16
20
25
30
40
50
60
80
32
36
45
58
68
80
100
125
165
18
22
25
30
35
45
50
60
80
28
35
42
51
60
77
88
105
140
52
56
70
80
88
108
135
160
205
7,6
10,4
10,8
13,2
14,2
18,7
23,6
29,6
38,4
deg.
78
78
60
60
50
50
50
54
54
1 160
1 500
2 240
3 350
5 600
9 000
13 400
20 400
37 500
C0
980
1 290
2 040
3 350
5 700
8 150
12 220
18 000
32 000
LUCT ..BH
Single heavy load units, clearance
LUCT.. BH (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic
static
H
H2
0,01
mm
LUCT 20 BH
LUCT 25 BH
LUCT 30 BH
LUCT 40 BH
LUCT 50 BH
20
25
30
40
50
45
58
68
80
100
25
30
35
45
50
42
51
60
77
88
70
80
88
108
135
10,8
13,2
14,2
18,7
23,6
C0
deg.
60
60
50
50
50
2 650
4 900
7 200
11 600
17 300
2 650
5 100
8 000
11 400
17 000
Example:
LUCT BH 30
LUCT BH 20-2LS
LUCT ..PA
Single units without seals, open type
Designations
Dimensions
Fw
Basic load ratings

dynamic
H
H2
mm
LUCT 12 PA
LUCT 16 PA
LUCT 20 PA
LUCT 25 PA
LUCT 30 PA
LUCT 40 PA
LUCT 50 PA
LUCT 60 PA
LUCT 80 PA
12
16
20
25
30
40
50
60
80
C
0,1 m/s
static
C
4 m/s
C0
24
38
60
100
137
200
300
415
720
3 350
5 400
8 300
14 000
19 300
28 000
41 500
60 000
100 000
deg. N
32
36
45
58
68
80
100
125
165
18
22
25
30
35
45
50
60
80
28
35
42
51
60
77
88
105
140
52
56
70
80
88
108
135
160
205
7,6
10,4
10,8
13,2
14,2
18,7
23,6
29,6
38,4
78
78
60
60
50
50
50
54
54
965
1 530
2 400
4 000
5 500
8 000
12 000
16 600
29 000
41
2 Guiding systems
LUNF ..
LUNF (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic static
H
H1
0,01
mm
LUNF 12
LUNF 16
LUNF 20
LUNF 25
LUNF 30
LUNF 40
LUNF 50
12
16
20
25
30
40
50
32
37
45
58
68
80
100
18
22
25
30
35
45
50
28
35
42
51
60
77
88
43
53
60
78
87
108
132
7,6
10,4
10,8
13,2
14,2
18,7
23,6
deg.
78
78
60
60
50
50
50
1 080
1 320
2 000
2 900
4 650
7 800
11 200
C0
815
865
1 370
2 040
3 250
5 200
6 950
Example:
LUNF 20
LUNF 16-2LS
LTCF ..
Tandem units, self-aligning, open type,
relubricatable
LTCF (without seals)
-2LS with two seals
Designations
Fw
Basic load ratings

dynamic static
H
H1
0,01
mm
LTCF 12
LTCF 16
LTCF 20
LTCF 25
LTCF 30
LTCF 40
LTCF 50
Example:
LTCF 50
LTCF 12-2LS
42
Dimensions
12
16
20
25
30
40
50
76
84
104
130
152
176
224
18
22
25
30
35
45
50
29
35
42
51
60
77
88
42
50
60
74
84
108
130
7,6
10,4
10,8
13,2
14,2
18,7
23,6
deg.
78
78
60
60
50
50
50
1 760
2 160
3 200
4 750
7 500
12 700
18 300
C0
1 630
1 730
2 750
4 150
6 550
10 400
14 000
LTCT ..
Tandem units, open type, relubricatable
LTCT (without seals)
-2LS with two seals
Designations
Dimensions
Fw
Basic load ratings

dynamic static
H
H1
mm
LTCT 12
LTCT 16
LTCT 20
LTCT 25
LTCT 30
LTCT 40
LTCT 50
12
16
20
25
30
40
50
76
84
104
130
152
176
224
18
22
25
30
35
45
50
29
35
42
51
60
77
88
42
50
60
74
84
108
130
7,6
10,4
10,8
13,2
14,2
18,7
23,6
deg.
78
78
60
60
50
50
50
1 900
2 450
3 650
5 500
9 150
15 000
22 000
C0
1 960
2 600
4 150
6 700
11 400
16 300
24 500
Example:
LTCT 16
LTCT 30-2LS
LQCF ..
Quadro units, self-aligning, open type,
relubricatable
LQCF (without seals)
Designations
Dimensions
Fw
Basic load ratings

dynamic static
H
H1
0,01
L1
mm
LQCF 12
LQCF 16
LQCF 20
LQCF 25
LQCF 30
LQCF 40
12
16
20
25
30
40
32
36
45
58
68
80
18
22
25
30
35
45
30
35
42
51
60
77
85
100
130
160
180
230
42
54
72
88
96
122
7,6
10,4
10,8
13,2
14,2
18,7
deg.
78
78
60
60
50
50
2 850
3 450
5 200
7 650
12 200
20 800
C0
3 250
3 450
5 500
8 150
12 900
20 800
Example:
LQCF 12
LQCF 40-2LS
43
2 Guiding systems
LQCT ..
Quadro units, open type, relubricatable
LQCT (without seals)
Designations
Dimensions
Fw
Basic load ratings

dynamic static
H
H1
0,01
L1
mm
LQCT 12
LQCT 16
LQCT 20
LQCT 25
LQCT 30
LQCT 40
LQCT 50
12
16
20
25
30
40
50
32
36
45
58
68
80
100
18
22
25
30
35
45
55
30
35
42
51
60
77
93
85
100
130
160
180
230
280
42
54
72
88
96
122
152
7,6
10,4
10,8
13,2
14,2
18,7
23,6
Example:
LQCT 42
LQCT 16-2LS
LRCB/LRCC
Shaft supports
LRCB with bore holes
LRCC without bore holes
Designations
H
0,02
22
26
32
36
42
50
60
68
86
600
600
600
600
600
600
600
600
600
mm
LRCB 12
LRCB 16
LRCB 20
LRCB 25
LRCB 30
LRCB 40
LRCB 50
LRCB 60
LRCB 80
Example:
LRCB 80
LRCC 80
44
Dimensions
d
A
LRCC 12
LRCC 16
LRCC 20
LRCC 25
LRCC 30
LRCC 40
LRCC 50
LRCC 60
LRCC 80
12
16
20
25
30
40
50
60
80
40
45
52
57
69
73
84
94
116
deg.
78
78
60
60
50
50
50
3 100
4 000
6 000
9 000
15 000
24 000
35 500
C0
4 000
5 200
8 300
13 400
22 800
33 500
49 000
Precision shafts
SKF precision shafts (fig.8) can be supplied
either as solid or hollow shafts.
The solid shafts are available in all
dimensions required to fit SKF linear ball
bearings; the hollow shafts have a minimum
outside diameter of 16mm.
They are induction hardened and ground
(see table on next page). SKF shafts have
exceptionally high dimensional stability and
long service life.
Yet at the end of shafts of normal
production length, deviations of hardness
and dimensional stability can occur.
For special applications, solid shafts
of stainless steel or hard chromium
plated shafts having a chromium layer
approximately 10 m thick can be supplied.
When using stainless steel shafts, please
note that the surface is not as hard as
that of shafts made of high-grade steel.
The case depth may also be greater than
indicated in table5 and this may have an
influence on the machinability of the shafts.
Because of the benefits they offer,
SKF precision shafts are not only used in
combination with SKF linear ball bearings
for linear guides, but also for other
purposes, for instance axles or column
sleeves.
Fig.8
Table 4
Nominal length
over
Deviation
incl.
mm
120
400
1000
2000
4000
Shaft diameter
Hardness
depth
over
incl.
min.
10
18
30
50
80
100
0,5
0,8
1,2
1,5
2,2
3
mm
120
400
1000
2000
4000
8000
0,3
0,5
0,8
1,2
2
3
Tolerances
SKF precision steel shafts are available
as standard with a diameter machined
totolerance h6 or h7. Other tolerances are
available on request. Shafts cut to special
lengths have a length tolerance to DIN
7168 medium. The relevant values are
given in table4.
Table 5
Length tolerances for shafts

to DIN/ISO 2768 medium class
10
18
30
50
80
Case hardening of SKF shafts
Shafts with radial holes

For linear guides requiring support, shafts
with threaded radial holes are needed.
These can be supplied by SKF. The radial
holes can be positioned either in a way that
they accommodate SKF shaft supports or as
specified in the customer drawing.

N.B.:
as PDF files.
45
2 Guiding systems
Precision shafts
Table 6
Composite shafts
Composite shafts can be supplied to
customer drawings, either with screwed
joints or with plug and socket joints,
depending on the application.
Accurately centred trunnions and sockets
guarantee smooth transitions at the butt
joint. To ensure correct assembly, the
relative positions of the shaft sections and
of the shaft ends are marked. Composite
shafts should be fastened to a support at
the butt joints, particularly when these are
of the plug and socket type. The radial
holes should be positioned as closely to
the joint as possible and the shaft length
selected in a way that bending of the shaft
will not result in a gap forming at the joint.
Materials
SKF precision steel shafts are available as
shown in tables6 and 7.
SKF precision shafts are made from
the non-alloyed high-grade steels Cf53
(Material No.1.1213), Ck53 (Material
No.1.1210), Ck60 (Material No.1.1221) and
100Cr6 (Material No.12067).
The surface hardness is between
approximately 60 and 64 HRC. The solid
shafts of stainless steel are made fromthe
steel X90CrMoV18 (Material No.1.4112)
or X46Cr13 (Material No.1.4034). In this
case the surface hardness lies between
approximately 52and 56 HRC.
Shafts made from other materials canbe
supplied to special order.
Designation
Type
LJM
LJMH
LJMR
LJMS
LJT
Precision shaft, steel Ck53/Cf53, 60-64HRC, h6

Hard chromium plated precision shaft, steel Ck53/Cf53, min. 60HRC, h7
Precision shaft, corrosion resistant, X90CrMoV18, 52-56HRC, h6/h7
Precision shaft, corrosion resistant, X46Cr13, 52-56HRC, h6/h7
Hollow shaft, high-grade steel, Ck60 or 100Cr6, 60-66HRC, h6/h7
Table 7
Standard length of the shafts1)
Shaft diameter
Dimensions
Maximal length2)
LJM3)
LJMS3)
LJMR3)
LJT3)
200
200
3800
3800
3800
3800
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
mm
34)
44)
5
6
8
10
12
14
16
20
25
30
40
50
60
80
1)
3900
3900
3900
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
Different diameters and length on request

Length tolerance 10 % (based on maximum shaft length)
For details see page 51/52
4)
Only available as ESSC 2
2)
3)
Standard shaft lengths
46
LJMH3)
2000
3900
3900
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
6200
1000
3900
3900
3900
4900
4900
4900
4900
4900
4900
4900
4900
4900
Ordering key
LJ
Type
Designation type:
Precision shaft, steel Ck53/Cf53, 60-64HRC, h6
Hard chromium plated precision shaft, steel Ck53/Cf53, min. 60HRC, h7
Precision shaft, corrosion resistant X90CrMoV18, 52-56HRC, h6/h7
Precision shaft, corrosion resistant, X46Cr13, 52-56HRC, h6/h7
Hollow shaft, high-grade steel, Ck60 or 100Cr6, 60-66HRC, h6/h7
M
MH
MR
MS
T
Nominal diameter (mm):

See table 7, page 46
Length (mm):
See table 7, page 46
End finishing:
ESSC (1-10), see pages 48-50
For ESSC 4 - 5: Front side axial thread depth
For ESSC 6 - 9: Distance between end face and first radial thread
For ESSC 5: Front side axial thread depth
For ESSC 6 - 9: Distance between the radial threads
Example 1:
LJ
MR
40
1200
ESSC1
Example 2:
LJ
MR
40
1200
ESSC2
Example 3:
LJ
MR
40
1200
ESSC3
Example 4:
LJ
MR
40
1200
ESSC4
M1440
Example 5:
LJ
MR
40
1200
ESSC5
M1440 / M1650
Example 6:
LJ
MR
40
1200
ESSC6
Example 7:
LJ
MR
40
1200
ESSC7
Example 8:
LJ
MR
40
1200
ESSC8
Example 9:
LJ
MR
40
1200
ESSC9
Example 10:
LJ
MR
40
1200
ESSC10
125
250
125
250
47
2 Guiding systems
Precision shafts
ESSC 1
Cut, without chamfer, only deburred
Length tolerance according to ISO 2768
medium class
free from bur
ESSC 2
Cut, with chamfer
Length tolerance as ESSC 1
1 min.
ESSC 3
Cut, 25 machined chamfer, end faces cut
at right angles for limited length tolerance
or chamfered according to customer
specification
Length tolerance +/ 0,1 mm to a total
length of 3000 mm
1 min.
ESSC 4
Cut, 25 machined chamfer, end faces cut at
right angles, one front-side (axial) hole
Length tolerance as ESSC 3
(table8)
Table 8
Diameter
mm
5
8
10
12
14
16
20
25
30
40
50
60
80
48
Thread
G
Depth
L5
mm
M4
M4
M5
M5
M6
M8
M10
M10
M12
M16
M20
M24
10
10
12,5
12,5
15
20
25
25
30
40
50
60
ESSC 5
As ESSC 4 with two front side (axial) holes
(table9)
Table 9
Diameter
Thread
G
Depth
L5
mm
mm
5
8
10
12
14
16
20
25
30
40
50
60
80
M4
M4
M5
M5
M6
M8
M10
M10
M12
M16
M20
M24
ESSC 6
Cut and chamfered as ESSC 2
with radial holes for LRCB
first radial hole at Jx = J/2
H1 according to hardening depth
(table10)
Table 10
Thread
mm
5
8
12
16
20
25
30
40
50
60
80
G1
Jx
8
9,5
13
14
18
20
23
28
33
75
100
100
120
150
200
200
300
300
37,5
50
50
60
75
100
100
150
150
mm
M4
M5
M6
M8
M10
M10
M12
M14
M16
5
6
7
9
11
11
13
15
16
ESSC 7
As ESSC6
radial holes with J and Jx according to
customer specification
(table11)
10
10
12,5
12,5
15
20
25
25
30
40
50
60
Table 11
Thread
mm
5
8
12
16
20
25
30
40
50
60
80
G1
Jx
8
9,5
13
14
18
20
23
28
33
mm
M4
M5
M6
M8
M10
M10
M12
M14
M16
5
6
7
9
11
11
13
15
16
49
2 Guiding systems
Precision shafts
ESSC 8
Cut and chamfer as ESSC 2
shaft mounted on LRCB
first radial hole with Jx = J/2
H1 according to hardness depth
(table12)
Table 12
Thread
mm
5
8
12
16
20
25
30
40
50
60
80
G1
Jx
8
9,5
13
14
18
20
23
28
33
75
100
100
120
150
200
200
300
300
37,5
50
50
60
75
100
100
150
150
mm
M4
M5
M6
M8
M10
M10
M12
M14
M16
5
6
7
9
11
11
13
15
16
ESSC 9
As ESSC8
shaft mounted on LRCC
radial holes with J and Jx according to
customer specification
(table13)
ESSC 10
Shaft according to customer specification
manufacture only according to customer
drawing
50
Table 13
Thread
mm
5
8
12
16
20
25
30
40
50
60
80
G1
Jx
8
9,5
13
14
18
20
23
28
33
mm
M4
M5
M6
M8
M10
M10
M12
M14
M16
5
6
7
9
11
11
13
15
16
Standard designs for fixed length without chamfer
Standard designs for fixed length with chamfer
1)
Shafts cut to special length with chamfered ends. The length tolerance of these
shafts corresponds to LJM 201500 ESSC2 medium class.
The designation for a shaft with 20 mm diameter cut to a length of1,5 m is, for
example, LJM 201500 ESSC2.
Basic data for the various models for the precision shafts
Dimensions
Mass
Solid
shaft
d1
Hollow
shaft
Hollow
shaft
cm4
kg/m
7
14
16
18
28
30
36
57
Solid
shaft
Cross sectional
area
Designations
Solid
shaft
Solid shaft Solid shaft of stainless

of precision steel
steel
Solid shafts
Hollow shaft
with high
high grade
grade steel
steel
hard chromium
plated
Cf53/Ck53
X90CrMoV18
X46Cr13
Cf53/Ck53
Ck60/100Cr6
LJM 5
LJM 6
LJM 8
LJM 10
LJM 12
LJM 14
LJM 16
LJM 20
LJM 25
LJM 30
LJM 40
LJM 50
LJM 60
LJM 80
LJMR 3
LJMR 4
LJMR 5
LJMR 6
LJMR 8
LJMR 10
LJMR 12
LJMR 14
LJMR 16
LJMR 20
LJMR 25
LJMR 30
LJMR 40
LJMR 50
LJMR 60
LJMS 5
LJMS 6
LJMS 8
LJMS 10
LJMS 12
LJMS 14
LJMS 16
LJMS 20
LJMS 25
LJMS 30
LJMS 40
LJMS 50
LJMS 60
LJMH 5
LJMH 6
LJMH 8
LJMH 10
LJMH 12
LJMH 14
LJMH 16
LJMH 20
LJMH 25
LJMH 30
LJMH 40
LJMH 50
LJMH 60
LJMH 80
LJT 12
LJT 16
LJT 20
LJT 25
LJT 30
LJT 40
LJT 50
LJT 60
LJT 80
Hollow
shaft
rmin
mm
3
4
5
6
8
10
12
14
16
20
25
30
40
50
60
80
Moment
of inertia
0,4
0,4
0,8
0,8
0,8
0,8
1
1
1
1,5
1,5
1,5
2
2
2,5
2,5
0,06
0,1
0,15
0,22
0,39
0,62
0,89
1,21
1,58
2,47
3,86
5,55
9,86
15,4
22,2
39,5
0,79
1,28
1,25
2,35
3,5
4,99
9,91
14,2
19,43
0,0004
0,0013
0,0031
0,0064
0,02
0,049
0,102
0,189
0,322
0,785
1,92
3,98
12,6
30,7
63,6
201
mm2
0,31
0,597
1,64
3,46
9,96
27,7
57,1
153
7,1
12,6
19,6
28,3
50,3
78,5
113
154
201
314
491
707
1 260
1 960
2 830
5 030
163
160
305
453
685
1 350
1 920
2 565
Attention:
d1 can deviate from the value quoted.
Different shaft diameters and types on
request.
The static load capacity has to be decreased
by 8% and the dynamic load capacity by
18% when using the non-rusting types
(HV6) in conjunction with precision steel
shafts made of stainless steel.
51
2 Guiding systems
Precision shafts
Basic data for the various models for the precision shafts of high-grade steel
Shaft
Accuracy of dimension and form

Shafts to tolerance h6
Nominal
diameter
Diameter
deviation
high
mm
3
4
5
6
8
10
12
14
16
20
25
30
40
50
60
80
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1)
52
Shafts to tolerance h7
1)
Roundness
Circularity
Straightness
Diameter
deviation
low
t1
t2
t3
high
6
8
8
8
9
9
11
11
11
13
13
13
16
16
19
19
3
4
4
4
4
5
5
5
5
6
6
6
7
7
8
8
4
5
5
5
6
7
8
8
8
9
9
9
11
11
13
13
150
150
150
150
120
120
100
100
100
100
100
100
100
100
100
100
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Shafts with straightness 50 mm/1000 mm to order.
Roundness
Circularity
Straightness1)
low
t1
t2
t3
10
12
12
12
15
15
18
18
18
21
21
21
25
25
30
30
4
5
5
5
6
7
8
8
8
9
9
9
11
11
13
13
6
8
8
8
9
10
11
11
11
13
13
13
16
16
19
19
150
150
150
150
120
120
100
100
100
100
100
100
100
100
100
100
Linear ball bearing table

without drive
LZBU quadro-linear tables (fig.9)
The closed LZBU quadro linear table
consists of a closed quadro linear bearing
unit, two tandem shaft blocks and two
shafts of the required length.
The bearing unit is fitted with four
LBCDLS self-aligning linear ball bearings,
each sealed at one end. The LZBU-A
design enables axial movement of the linear
bearing unit, i.e. the shafts are fixed to the
machine bed via LEAS-A shaft blocks. The
LZBUB design is provided with LEASB
shaft blocks. This combination enables the
shafts to travel with the shaft blocks in
applications where the linear bearing unit
is fixed. LZBU quadro linear tables can be
supplied in sizes ranging from 8 to 50 mm.
Size 8 tables are not self-aligning and are
not designed for relubrication.
The description of the closed quadrolinear table also applies to the combination
of series 1 LQBR..2LS quadro linear
bearing units with twin LEBS tandem shaft
blocks and shafts (on special request only).
Shaft diameters range from 12 to 50 mm.
LZAU quadro-linear tables
The open LZAU quadro linear table
comprises the open quadro-linear unit
and two high precision shafts with shaft
Fig.9
LZBU
LZAU
supports. The bearing unit is fitted with

four LBCF-A-LS self-aligning linear ball
bearings, each sealed on one end. The
length of these tables is dictated by the
distance between centres of the attachment
holes in the LRCB shaft supports. The total
length should always be a multiple of this
distance. LZAU are available in sizes ranging
from 12 to 50 mm.

N.B.:
as PDF files.
53
2 Guiding systems
Linear ball bearing table without drive
Ordering key
LZ
Type:
Design:
Open design
Closed design
Nominal diameter
For AU
For BU
AU
BU
in mm:
12 - 50
8 - 50
Option:
LZAU with LRCB shaft supports
LEAS A, high shaft position
LEAS B, low shaft position
no sign
A
B
Other option:
Both sides sealed
-2LS
Length in mm:
Example:
54
L Z BU
40
-2LS
X 1500
LZBU ..A-2LS
Quadro linear tables, LZBU version with
LQCD closed bearing units, LEAS-A* shaft
blocks and shafts
* A design means fixed shafts and moving unit
2
Design LZBU A with closed linear bearing unit
Designations1)
Load ratings3)
dynamic static
Dimensions
d
HRA
H1A
L12)
L2
L3
J1
J2
C0
0,03
mm
LZBU 8 A-2LS4)
LZBU 12 A-2LS
LZBU 16 A-2LS
LZBU 20 A-2LS
LZBU 25 A-2LS
LZBU 30 A-2LS
LZBU 40 A-2LS
LZBU 50 A-2LS
8
12
16
20
25
30
40
50
N
24
34
38
48
58
67
84
100
23
32
37
46
56
64
80
96
600
900
1500
1800
1800
2400
3000
3000
65
85
100
130
160
180
230
280
32
42
54
72
88
96
122
152
55
73
88
115
140
158
202
250
52
70
82
108
132
150
190
240
1290
2850
3450
5200
7650
12200
20800
30000
1420
3250
3450
5500
8150
12900
20800
28000
1)
The designation for an LZBU quadro-linear table with a shaft length of, for instance, 1200 mm LZBU -2LS1200. Delivered as a kit of parts.
Recommended maximal shaft length. On demand longer shaft lengths are available. The appropiate length tolerances of these shafts are according to DIN7168
coarse series.
3)
Valid only for even loading of all four LBC A linear ball bearings. On delivery the deviation of the shaft must be considered and possibly the load rating revised.
4)
Units fitted with LBCR linear ball bearings are not designed for relubrication and are not self-aligning.
2)
55
2 Guiding systems
LZBU ..B-2LS
Quadro linear tables, LZBU version with
LQCD closed bearing units, LEAS-B* shaft
blocks and shafts
* B design means fixed unit and moving shafts
Design LZBU B with closed linear bearing unit
Designations1)
Load ratings3)
dynamic static
Dimensions
d
HRB
0,03
H1B
L12)
L2
L3
J1
J2
mm
LZBU 8 B-2LS4)
LZBU 12 B-2LS
LZBU 16 B-2LS
LZBU 20 B-2LS
LZBU 25 B-2LS
LZBU 30 B-2LS
LZBU 40 B-2LS
LZBU 50 B-2LS
1)
8
12
16
20
25
30
40
50
C0
N
22,5
30
35
44
54
61
76
92
22
28
34
42
52
58
72
88
600
900
1500
1800
1800
2400
3000
3000
65
85
100
130
160
180
230
280
32
42
54
72
88
96
122
152
55
73
88
115
140
158
202
250
52
70
82
108
132
150
190
240
1290
2850
3450
5200
7650
12200
20800
30000
1420
3250
3450
5200
8150
12900
20800
28000
The designation for an LZBU quadro-linear table with a shaft length of, for instance, 1200 mm LZBU -2LS1200. Delivered as a kit of parts.
Recommended maximal shaft length. On demand longer shaft lengths are available. The appropiate length tolerances of these shafts are according to DIN7168
coarse series.
3)
Valid only for even loading of all four LBC A linear ball bearings. On delivery the deviation of the shaft must be considered and possibly the load rating revised.
4)
Units fitted with LBCR linear ball bearings are not designed for relubrication and are not self-aligning.
2)
56
LZAU ..-2LS
Quadro linear tables, LZAU version with
LQCF open bearing units and supported
shafts
2
Design LZAU with open linear bearing unit type LQCF
Designations1)
Load ratings3)
dynamic
static
Dimensions
d
HT
0,03
J2)
L1
L2
J2
mm
LZAU 12-2LS
LZAU 16-2LS
LZAU 20-2LS
LZAU 25-2LS
LZAU 30-2LS
LZAU 40-2LS
LZAU 50-2LS
12
16
20
25
30
40
50
C0
N
40
48
57
66
77
95
115
75
100
100
120
150
200
200
900
1500
1800
1800
2400
3000
3000
85
100
130
160
180
230
280
42
54
72
88
96
122
152
73
88
115
140
158
202
250
2850
3450
5200
7650
12200
20800
30000
3250
3450
5500
8150
12900
20800
28000
1)
he designation for an LZAU quadro-linear table with a shaft length of, for instance, 600 mm LZAU2LS600. Delivered with shafts and shaft supports ready
T
assembled.
The separation is always arranged symmetrically to half the table length.
3)
Valid only for even loading of all four LBC A linear ball bearings.
2)
Dimensions
Standard length
d
mm
Length increments in mm
1240
50
300
600
600
900
900
1200
1200
1500
1500
1800
1800
2100
2100
2400
2400
2700
2700
3000
3000
57
2 Guiding systems
Applications
In response to industry's ultimate need
toproduce more with less, SKF has
combined its knowledge and experience

with the latest technology to develop
solutions for your specific conditions.
Whether your goal is to design equipment
that provides more customer value, or

toincrease overall profitability, with SKF
experience and expertise, you're likely
to find a real solution.
Portable tool
Pneumatic handling
Components application
a) Linear ball bearings
b) Precision shafts
b) Precision shafts
Bread slicing machine
Press brake
b) Precision shafts
c) Precision ball screws
58
Profile rail guides
Fig.10
Profile rail guides from SKF are modern

machine components used in the
production of linear guiding systems with
unlimited travel (fig.10).
They usually consist of a profile rail with
four precision-ground raceways and a
slide unit with four ball circulation paths.
This design offers numerous benefits. The
square configuration of the raceways results
in a guidance system with good rigidity,
capable of withstanding moment loads in all
directions.
The load-carrying capacity is equal in all
four directions (fig.11). Ready-to-mount
units guarantee economy and simplicity
of mounting. Installation and adjustment
procedures are reduced to a minimum.
The design of the system is such that
inaccuracies of the adjacent components
can be accommodated.
SKF profile rail guides are noted for
their ease of maintenance and reliability.
As standard, they are provided with grease
nipple and seals on all sides. The two-point
contact of the rolling elements with the
raceways permits high operational speeds
with quiet running and a low coefficient of
friction. Good running accuracy is assured
throughout the operational life of the
system. Guides with specific preload can
be supplied for special requirements. This
is achieved through selection. Preload
selection depends on the load and stiffness
specifications.
Fig.11
Profile rail guides
N.B.:
as PDF files.
59
2 Guiding systems
Profile rail guides
Ordering key
LLR
Type
Product code:
Bellows (for bellows only)
Carriage (carriage only)
Rail (rail only)
System (carriage and rail)
Accessories, if order separately
HB
HC
HR
HS
HZ
Size:

15, 20, 25, 30, 35, 45
Carriage type:
Carriage, standard width
Carriage, standard width, short
Carriage, standard width, long
Carriage, slim line
Carriage, slim line, short
Carriage, slim line, long
Carriage, slim line, high
Carriage, slim line, high, long
A
SA
LA
U
SU
LU
R
LR
Ball retainer:
Carriage with ball retainer
Carriage without ball retainer
B
no sign
Number of carriages per rail track:
1, 2, C9, n
Preload classes:
Up to 10 m clearance, play
Preload 0,02C, light preload
Preload 0,08C, medium preload
Preload 0,12C, high preload
T0
T1
T2*
T3*
Rail length in mm
Precision class (for carriage and rail):
Standard precision
Medium precision
High precision
Super precision
Ultra precision
P5
P3
P1*
P01*
P001*
Number of parallel rail tracks:

One rail alone
Two rails in parallel
W1
W2
Accessories & Option symbols:

Jointed rail track
Bellows, system complete with bellows
Bellow Kit, type 2 (carriage thru the end of the rail)
Bellow Kit, type 4 (between two carriages)
Rail, customized accessories to drawing number
Rail with cover strip and cover strip guard type 2 (aluminium)
Distance between end face and the first hole (mm):
Symmetric holes as standard
Carriage mounted on rail
Scraper plates
Two piece front seals
Seal Kit, two piece front seals with scraper plates
A
B
B2
B4
D2
E=0
M
S1
S2
S3
* On request
Example 1:
LLR HB
25 -
Example 3:
LLR HS
25 - 1000
Example 5:
LLR HS
25
60
15
Bellow only with

15 folds
P5
Rail only
Example 2:
LLR HC
25
T1
Example 4:
LLR HS
25
T0 - 1000
T0 - 1000
P5
W2 / D2
S2
P5
Carriage only
P5
Complete system with

carriage and rail
Complete system ind. rail with cover strip and

cover strip guard plus two piece front seal

Scraper plate

Two-piece front seal

Seal kit
Size
Items
15
20
25
30
35
45
LLRHZ 15 S1
LLRHZ 20 S1
LLRHZ 25 S1
LLRHZ 30 S1
LLRHZ 35 S1
LLRHZ 45 S1
Size
Items
15
20
25
30
35
45
LLRHZ 15 S2
LLRHZ 20 S2
LLRHZ 25 S2
LLRHZ 30 S2
LLRHZ 35 S2
LLRHZ 45 S2
Size
Items
15
20
25
30
35
45
LLRHZ 15 S3
LLRHZ 20 S3
LLRHZ 25 S3
LLRHZ 30 S3
LLRHZ 35 S3
LLRHZ 45 S3
61
2 Guiding systems
Profile rail guides
LLRHS .. SA
LLRHS .. A
LLRHS .. LA
M0C
M 0A
W1
W3
M1
M2
H8
H3
L1
M1
d 4 H6
H9
d2
H5
L1
B2
L4
d4
LA
B2
L4
H9
H1
H4
N
H7
W
E
d3
SA
Designations
Dimensions
W1
L1
L2
H1
H41)
H42)
H3
W2
L3
L5
W3
16,3
16,3
16,3
16,2
16,2
16,2
H5
L6
L4
H8
H9
mm
LLRHS 15 SA
LLRHS 15 A
LLRHS 15 LA
47
47
47
15
15
15
16
16
16
44,7
58,2
72,6
25,7
39,2
53,6
24
24
24
19,9
19,9
19,9
5
5
5
38
38
38
30
30
26
26
24,55 6,7
24,55 6,7
24,55 6,7
16,25 17,85 3,2

8
9,6
3,2
15,2
16,8
3,2
3,2
3,2
3,2
LLRHS 20 SA
LLRHS 20 A
LLRHS 20 LA
63
63
63
20
20
20
21,5
21,5
21,5
57,3
75
91
31,9
49,6
65,6
30
30
30
25,35 20,75 20,55 6

25,35 20,75 20,55 6
25,35 20,75 20,55 6
53
53
53
40
40
35
35
32,5
32,5
32,5
7,3
7,3
7,3
22,95 22,95 3,35

11,8
11,8
3,35
19,8
19,8
3,35
3,35
3,35
3,35
LLRHS 25 SA
LLRHS 25 A
LLRHS 25 LA
70
70
70
23
23
23
23,5
23,5
23,5
67
38,6
86,2 57,8
107,9 79,5
36
36
36
29,9
29,9
29,9
57
57
57
45
45
40
40
38,3
38,3
38,3
11,5
11,5
11,5
25,35 26,5
5,5
12,45 13,6
5,5
23,3
24,45 5,5
5,5
5,5
5,5
LLRHS 30 SA
LLRHS 30 A
LLRHS 30 LA
90
90
90
28
28
28
31
31
31
75,3 45
97,7 67,4
119,7 89,4
42
42
42
35,35 28,55 28,35 7

35,35 28,55 28,35 7
35,35 28,55 28,35 7
72
72
72
52
52
44
44
48,4
48,4
48,4
14,6
14,6
14,6
28,8
14
25
6,05
6,05
6,05
LLRHS 35 SA
LLRHS 35 A
LLRHS 35 LA
100
100
100
34
34
34
33
33
33
84,9 51,4 48
110,5 77
48
139 105,5 48
40,4
40,4
40,4
32,15 31,85 8
32,15 31,85 8
32,15 31,85 8
82
82
82
62
62
52
52
58
58
58
17,35 32,7
34,2
6,9
17,35 14,5
16
6,9
17,35 28,75 30,25 6,9
6,9
6,9
6,9
LLRHS 45 A
LLRHS 45 LA
120
120
45
45
37,5
37,5
137,6 97
60
174,1 133,5 60
50,3
50,3
40,15 39,85 10
40,15 39,85 10
100 80
100 80
60
60
69,8
69,8
20,9
20,9
8,2
8,2
1)
2)
62
With rail cover strip

Without rail cover strip
24,45 24,25 7,5

24,45 24,25 7,5
24,45 24,25 7,5
17,3
35,5
30,5
15,7
26,7
19,3
37,5
6,05
6,05
6,05
8,2
8,2
a)
L6
L2
Legend:
a) F
or O-ring
Size 15: 41,0 (mm)
Size 20-35: 51,0 (mm)
Open the lube hole if required.
SA
b)
b) L
ube nipple, size 15 and 20:
Funnel-type nipple
Type A Thread size M3, DIN 3405
B2 = 1,6 mm
Size 25 to 35: AM 6 DIN 71412
B2 = 9,5 mm
W2
M 0B
a)
L6
L2
Lubricating nipples form part of the

delivery and have been included.
When using other lubricating nipples,
it is important to not exceed the correct
screw depth of 8 mm.
L5 L3
A, LA
Installation is possible on all sides.

b)
W2
Designations
Dimensions
H6
H7
0,5
Basic load ratings

d4
M1
d2
d3
M2
Emin
mm
C0
Mass
M0A/0B
M0C
Nm
kg
LLRHS 15 SA
LLRHS 15 A
LLRHS 15 LA
4,4
4,4
10,3
10,3
10,3
4,3
4,3
4,3
M55,2
M55,2
M55,2
7,4
7,4
7,4
4,4
4,4
4,4
M2,53,5 deep
M2,53,5 deep
M2,53,5 deep
10
10
10
60
60
60
5400
7800
10000
8100
13500
20000
28
71
150
80
130
190
0,15
0,2
0,3
LLRHS 20 SA
LLRHS 20 A
LLRHS 20 LA
5,2
5,2
13,2
13,2
13,2
5,3
5,3
5,3
M67,7
M67,7
M67,7
9,4
9,4
9,4
6
6
6
M35 deep
M35 deep
M35 deep
10
10
10
60
60
60
12400
18800
24400
13600
24400
35200
58
165
330
170
310
450
0,3
0,45
0,55
LLRHS 25 SA
LLRHS 25 A
LLRHS 25 LA
7
7
15,2
15,2
15,2
6,7
6,7
6,7
M89,3
M89,3
M89,3
11
11
11
7
7
7
M35 deep
M35 deep
M35 deep
10
10
10
60
60
60
15900
22800
30400
18200
30400
45500
94
240
510
260
430
650
0,5
0,65
0,9
LLRHS 30 SA
LLRHS 30 A
LLRHS 30 LA
7,9
7,9
17
17
17
8,5
8,5
8,5
M1011,0
M1011,0
M1011,0
15
15
15
9
9
9
M35 deep
M35 deep
M35 deep
12
12
12
80
80
80
22100
31700
40000
24800
41300
57800
150
380
715
430
720
1000
0,8
1,1
1,5
LLRHS 35 SA
LLRHS 35 A
LLRHS 35 LA
10,2
10,2
20,5
20,5
20,5
8,5
8,5
8,5
M1012,0
M1012,0
M1012,0
15
15
15
9
9
9
M35 deep
M35 deep
M35 deep
12
12
12
80
80
80
29300
41900
55600
32400
54000
81000
220
565
1215
700
1160
1740
1,2
1,6
2,25
LLRHS 45 A
LLRHS 45 LA
14,4
12,4
23,5
23,5
10,4 M1215,0
10,4 M1215,0
20
20
14
14
M47 deep
M47 deep
16
16
105
105
68100
90400
85700
128500
1130
2425
2310
3470
3
4,3
63
2 Guiding systems
Profile rail guides
LLRHS .. SU
LLRHS .. U
LLRHS .. LU
M 0C
W1
W3
M2
H3
M 0A
L1
M1
H8
d2
L1
B2
L4
H9
B2
L4
H9
H5
H
H1
H4
N
H7
W
E
d3
SU
Designations
U, LU
Dimensions
W1
L1
L2
H1
H41)
H42)
H3
W2
L3
W3
H5
L6
L4
H8
H9
16,3
16,3
16,3
16,2
16,2
16,2
5
5
5
26
26
26
26
26
24,55
24,55
24,55
6,7
6,7
6,7
16,25
10
17,2
17,85
11,6
18,8
3,2
3,2
3,2
3,2
3,2
3,2
mm
LLRHS 15 SU
LLRHS 15 U
LLRHS 15 LU
34
34
34
15
15
15
9,5
9,5
9,5
44,7
58,2
72,6
25,7
39,2
53,6
24
24
24
19,9
19,9
19,9
LLRHS 20 SU
LLRHS 20 U
LLRHS 20 LU
44
44
44
20
20
20
12
12
12
57,3
75
91
31,9
49,6
65,6
30
30
30
25,35 20,75
25,35 20,75
25,35 20,75
20,55
20,55
20,55
6
6
6
32
32
32
36
50
32,5
32,5
32,5
7,3
7,3
7,3
22,95
13,8
14,8
22,95
13,8
14,8
3,35
3,35
3,35
3,35
3,35
3,35
LLRHS 25 SU
LLRHS 25 U
LLRHS 25 LU
48
48
48
23
23
23
12,5
12,5
12,5
67
38,6
86,2 57,8
107,9 79,5
36
36
36
29,9
29,9
29,9
24,45
24,45
24,45
24,25
24,25
24,25
7,5
7,5
7,5
35
35
35
35
50
38,3
38,3
38,3
11,5
11,5
11,5
25,35
17,45
20,8
26,5
18,6
21,95
5,5
5,5
5,5
5,5
5,5
5,5
LLRHS 30 SU
LLRHS 30 U
LLRHS 30 LU
60
60
60
28
28
28
16
16
16
75,3 45
97,7 67,4
119,7 89,4
42
42
42
35,35 28,55
35,35 28,55
35,35 28,55
28,35
28,35
28,35
7
7
7
40
40
40
40
60
48,4
48,4
48,4
14,6
14,6
14,6
28,8
20
21
30,5
21,7
22,7
6,05
6,05
6,05
6,05
6,05
6,05
LLRHS 35 SU
LLRHS 35 U
LLRHS 35 LU
70
70
70
34
34
34
18
18
18
84,9 51,4
48
110,5 77
48
139
105,5 48
40,4
40,4
40,4
32,15
32,15
32,15
31,85
31,85
31,85
8
8
8
50
50
50
50
72
58
58
58
17,35
17,35
17,35
32,7
20,5
23,75
34,2
22
25,25
6,9
6,9
6,9
6,9
6,9
6,9
LLRHS 45 U
LLRHS 45 LU
86
86
45
45
20,5
20,5
137,6 97
60
174,1 133,5 60
50,3
50,3
40,15
40,15
39,85
39,85
10
10
60
60
60
80
69,8
69,8
20,9
20,9
27,3
35,5
29,3
37,5
8,2
8,2
8,2
8,2
1)
2)
64

a)
L6
L2
Legend:
a) F
or O-ring
Size 15: 41,0 (mm)
Size 20-35: 51,0 (mm)
SU
b)
b) L
Funnel-type nipple
B2 = 1,6 mm
Size 25 to 35: AM 6 DIN 71412
B2 = 9,5 mm
W2
a)
M 0B
L6
L2

L3
U, LU

b)
W2
Designations
Dimensions
H7
0,5
M1
Basic load ratings

d2
d3
M2
Emin
mm
C0
Mass
M0A/0B
M0C
Nm
kg
LLRHS 15 SU
LLRHS 15 U
LLRHS 15 LU
10,3
10,3
10,3
M46,0
M46,0
M46,0
7,4
7,4
7,4
4,4
4,4
4,4
M2,53,5 deep
M2,53,5 deep
M2,53,5 deep
10
10
10
60
60
60
5400
7800
10000
8100
13500
20200
28
71
150
80
130
190
0,1
0,15
0,2
LLRHS 20 SU
LLRHS 20 U
LLRHS 20 LU
13,2
13,2
13,2
M57,5
M57,5
M57,5
9,4
9,4
9,4
6
6
6
M35 deep
M35 deep
M35 deep
10
10
10
60
60
60
12400
18800
24400
13600
24400
35200
58
165
330
170
310
450
0,25
0,35
0,45
LLRHS 25 SU
LLRHS 25 U
LLRHS 25 LU
15,2
15,2
15,2
M69,0
M69,0
M69,0
11
11
11
7
7
7
M35 deep
M35 deep
M35 deep
10
10
10
60
60
60
15900
22800
30400
18200
30400
45500
94
240
510
260
430
650
0,35
0,5
0,65
LLRHS 30 SU
LLRHS 30 U
LLRHS 30 LU
17
17
17
M812,0
M812,0
M812,0
15
15
15
9
9
9
M35 deep
M35 deep
M35 deep
12
12
12
80
80
80
22100
31700
40000
24800
41300
57800
150
380
715
430
720
1000
0,6
0,85
1,1
LLRHS 35 SU
LLRHS 35 U
LLRHS 35 LU
20,5
20,5
20,5
M813,0
M813,0
M813,0
15
15
15
9
9
9
M35 deep
M35 deep
M35 deep
12
12
12
80
80
80
29300
41900
55600
32400
54000
81000
220
565
1215
700
1160
1740
0,9
1,25
1,7
LLRHS 45 U
LLRHS 45 LU
23,5
23,5
M1018,0
M1018,0
20
20
14
14
M47 deep
M47 deep
16
16
105
105
68100
90400
85700
128500
1130
2425
2310
3470
2,4
3,2
65
2 Guiding systems
Profile rail guides
LLRHS .. R
LLRHS .. LR
M 0C
M 0A
W3
W1
M2
M1
H8
H3
L1
B2
L4
d2
H9
H5
H
H1
H4
N
H7
d3
R, LR
Designations
Dimensions
W1
L1
L2
H1
H41)
H42)
H3
W2
L3
W3
H5
L6
L4
H8
H9
mm
LLRHS 15 R
34
15
9,5
58,2
39,2
28
23,9
16,3
16,2
26
26
24,55
10,7
10
11,6
7,2
7,2
LLRHS 25 R
LLRHS 25 LR
48
48
23
23
12,5
12,5
86,2 57,8
107,9 79,5
40
40
33,9
33,9
24,45
24,45
24,25
24,25
7,5
7,5
35
35
35
50
38,3
38,3
15,5
15,5
17,45
20,8
18,6
21,95
9,5
9,5
9,5
9,5
LLRHS 30 R
LLRHS 30 LR
60
60
28
28
16
16
97,7 67,4
119,7 89,4
45
45
38,35 28,55
38,35 28,55
28,35
28,35
7
7
40
40
40
60
48,4
48,4
17,6
17,6
20
21
21,7
22,7
9,05
9,05
9,05
9,05
LLRHS 35 R
LLRHS 35 LR
70
70
34
34
18
18
110,5 77
55
139
105,5 55
47,4
47,4
32,15
32,15
31,85
31,85
8
8
50
50
50
72
58
58
24,35
24,35
20,5
23,75
22
25,25
13,9
13,9
13,9
13,9
LLRHS 45 R
LLRHS 45 LR
86
86
45
45
20,5
20,5
137,6 97
70
174,1 133,5 70
60,3
60,3
40,15
40,15
39,85
39,85
10
10
50
60
60
80
69,8
69,8
30,9
30,9
27,3
35,5
29,3
37,5
18,2
18,2
18,2
18,2
1)
2)
66

Legend:
a) F
or O-ring
Size 15: 41,0 (mm)
Size 20-35: 51,0 (mm)
a)
L6
L2
L3
b) L
Funnel-type nipple
B2 = 1,6 mm
Size 25 to 35: AM 6 DIN 71412
B2 = 9,5 mm
M 0B
R, LR

b)
W2
Designations
Dimensions
H7
0,5
M1
Basic load ratings

d2
d3
M2
Emin
mm
C0
Mass
M0A/0B
M0C
Nm
kg
LLRHS 15 R
10,3
M46,0
7,4
4,4
M2,53,5 deep
10
60
7800
13500
71
130
0,2
LLRHS 25 R
LLRHS 25 LR
15,2
15,2
M69,0
M69,0
11
11
7
7
M35 deep
M35 deep
10
10
60
60
22800
30400
30400
45500
240
510
430
650
0,6
0,8
LLRHS 30 R
LLRHS 30 LR
17
17
M812,0
M812,0
15
15
9
9
M35 deep
M35 deep
12
12
80
80
31700
40000
41300
57800
380
715
720
1000
0,95
1,2
LLRHS 35 R
LLRHS 35 LR
20,5
20,5
M813,0
M813,0
15
15
9
9
M35 deep
M35 deep
12
12
80
80
41900
55600
54000
81000
565
1215
1160
1740
1,55
2,1
LLRHS 45 R
LLRHS 45 LR
23,5
23,5
M1018,0
M1018,0
20
20
14
14
M47 deep
M47 deep
16
16
105
105
68100
90400
85700
128500
1130
2425
2310
3470
3
4,1
67
2 Guiding systems
Profile rail guides
Applications
In response to industrys ultimate need


experience and expertise, youre likely
Woodworking machine
Encapsulating chips with plastic
a) Profile rail guides
b) Precision ball screws
Handling
Packaging
68
Miniature profile rail

guides
In response to the market trend for
increased performance with a minimum
of mounting space, SKF has extended its
product range by miniature profile rail
guides (fig.12).
These linear guides are designed above
all for applications in precision mechanics,
medical engineering, microassembly and
the optics industry.
The close cooperation with numerous
customers, combined with SKFs experience,
has resulted in a range of miniature rail
guides that sets new standards, especially
when the mounting space is limited, SKF
miniature profile rail guides are an excellent
choice, as they have a high load-carrying
capacity combined with a compact design.
SKF offers its customers an excellent
technical advisory service on the spot
as well as a vast modular range for the
performance increase of machines and
installations.
SKF offers these profile rail guides in four
sizes (7, 9, 12 and 15 mm) and various
slide options to cover most application
requirements.
Compact design: thanks to their simple
structure, miniature profile rail guides are
compact and economical. This small and
lightweight product is very suitable for highspeed linear motion up to 3 m/s.
Long-life: gothic arch grooves at the
raceway contacts enable the slide to sustain
loads and moments from any direction. The
raceway shape offers a large load capacity
and a long lifetime due to the contact
between the raceways and the balls.
Fig.12
Fig.13
15 WLA
12 WLA
12 WTA
7 LA
7 TA
12 LA
15 LA
15 WTA
12 TA
15 TA
9 WLA
9 LA
9 WTA
9 TA
Corrosion resistant: all parts of the system

are made of stainless steel or plastic
material and are thus resistant to corrosion.
Miniature
profile rail guides
Easy to maintain: oil holes in the end caps

of the carriage make it easy to relubricate
the system.
Structure: four-point contact ball
recirculation system with identical load
angles and 2 ball recirculation paths per
carriage for unlimited stroke.
Range: four different types (7, 9, 12, 15)
comprising different widths and carriage
lengths (fig.13).
N.B.:
as PDF files.
69
2 Guiding systems
Miniature profile rail guides
The preload possibilities for carriage are
given in table14, and the technical data in
table 15.
Table 14
TA
LA
T0*
T1*
T2*
* T0 = standard light preload

* T1 = medium preload
* T2 = heavy preload
Table 15
Rail material:
Carriage material:
Ball material:
Sealing material:
Temperature range:
Speed:
Acceleration:
Stainless steel 1.4034

Stainless steel 1.4034 with return zones of POM
Stainless steel 1.4034
Desmopan
from 20 C up to + 80 C
up to 3 m/s max.
up to 80 m/s2 max.
Preload possibilities for carriage
Technical data
Fig.15
Fig.14
N
System accuracy
The system accuracy (fig.14) and the

system tolerance (fig.15) of different
guidance systems are given in table 16.
Table 16
Dimension
H*
N*
H1)**
N**
Dimension tolerance
Dimension tolerance
Maximum tolerance for paired systems or carriages
at identical rail position
Maximum tolerance for paired systems or carriages
at identical rail position
Class
P1
P5
10
15
7
20
25
15
15
* The tolerances apply over the entire guide length for any combination of carriage and rail.
** The dimensions H and N relate to the ideal centre of the carriage. Each dimension is derived from the mean value of two
measured points with identical centre distance.
System accuracy and tolerance of different guidance systems
70
System tolerance
The running parallelism accuracy in

operation of paired systems are given
indiagram1 and fig.16.
Diagram1
Fig.16
Pa (m)
16
14
12
10
8
6
4
2
0
P5
Pa
P1
100
200
300
400
500
600
700
800
900
Running parallelism accuracy
The positioning (distance) tolerance ofrail

attachment holes can be seen in figure17.
Fig.17
71
2 Guiding systems
Ordering key
LLM
E=0
Type
Rail type:
Standard rail
Wide rail
H
W
Product code:
System (rail + carriage)
Rail
Carriage
S
R
C
Size:

7, 9, 12, 15
Carriage types:
Standard carriage
Long carriage
TA
LA
Option:
Carriage with seals
Carriage without seal
R
no sign
Number of carriages:

1, 2, C9, n
Preload:
Light clearance
Medium preload
Preloaded
T0
T1
T2
Length of rail track:

Max 1000 mm
Precision class:
Standard precision (suitable for most applications)
High precision
P5
P1
Number of rail track used in parallel:

One rail alone
Two rails in parallel
W1
W2
Auxiliary symbols:
Plastic end-stop
Steel end-stop
no sign
M
Distance between end face and the first hole (mm):

Symmetric holes standard
Example:
72
E=0
LLM H S
12
TA R
T0 - 700
P1
W2 M
E=0
LLMHR
Designations
Standard rails
Dimensions
W
d2
Max. length
F
d2
d3
15
20
25
40
4,5
6
6
6
2,5
3,5
3,5
3,5
2,5
3,5
4,5
4,5
mm
d3
LLMHR 7
LLMHR 9
LLMHR 12
LLMHR 15
7
9
12
15
Designations
Dimensions
1000
1000
1000
1000
LLMWR
Wide rails
d2
Max.length
W5
d2
d3
0
0
23
30
40
40
6
8
8
3,5
4,5
4,5
4,5
4,5
4,5
mm
d3
LLMWR9
LLMWR 12
LLMWR 15
18
24
42
Designations
Dimensions
1000
1000
1000
W5
W
LLMWR .. 15 design
LLMHC ..TA
Standard carriages
L1
L3
W1
W2
4 - M1
Loadcarryingcapacities
dynamic static
W1
W2
L1
L3
M1
H1
C0
17
20
27
32
12
15
20
25
8
10
13
16
22
30
33
41,5
8
10
15
20
M22,5
M33
M33,5
M34
1,5
2
3
4
860
1850
2550
2880
1670
3130
4000
5390
mm
LLMHC 7 TA
LLMHC 9 TA
LLMHC 12 TA
LLMHC 15 TA
7
9
12
15
H
H1
W
73
2 Guiding systems
LLMWC ..TA
Designations
Carriages for wide rails
Dimensions
Load-carrying
capacities
dynamic static
L1
L3
W1
W2
L1
30
40
60
21
28
45
12
14
16
36,5 12
42,5 15
51,2 20
L3
M1
H1
C0
M33
M33,5
M44,5
2
3
4
1785
3300
3890
3330
5780
7060
mm
W1
W2
4 - M1
LLMWC 9 TA
LLMWC 12 TA
LLMWC 15 TA
18
24
42
Designations
Dimensions
H
H1
W
W1
W2
4 - M1
H
H1
W
LLMWC .. 15 design
LLMHC ..LA
Long carriages
L1
L3
Load-carrying
capacities
dynamic static
W1
W2
L1
L3
M1
H1
C0
17
20
27
32
12
15
20
25
8
10
13
16
29,5
38,5
45
57,5
12
15
20
25
M22,5
M33
M33,5
M34
1,5
2
3
4
1400
2295
3470
4670
2700
4270
6225
8720
mm
W1
W2
4 - M1
LLMHC 7 LA
LLMHC 9 LA
LLMHC 12 LA
LLMHC 15 LA
7
9
12
15
Designations
Dimensions
H
H1
W
LLMWC ..LA
Long carriages for wide rails
L1
L3
Load-carrying
capacities
dynamic static
W1
W2
L1
L3
30
40
60
23
28
45
12
14
16
48,5 24
56
28
70,5 35
M1
H1
C0
M33
M33,5
M44,5
2
3
4
2640
4150
5830
4900
8000
10600
mm
LLMWC 9 LA
LLMWC 12 LA
LLMWC 15 LA
W1
W2
4 - M1
H
H1
W
W1
W2
4 - M1
H
H1
W
74
18
24
42
Applications
Laboratory equipment


PCB drilling and routing machine

2
a) Miniature profile rail guides
b) Miniature ball screws
c) Miniature slides
Pick-and-place manipulators
Pneumatic industry - Compact piston rod cylinder
a) Integrated miniature slides
75
More precision
for more performance
Have you ever wondered how a birds
requests for precision with micrometer
nest, which appears to be so fragile,
accuracy products like precision rail
can withstand the heaviest rain and
guides, also available with a state-
strong winds? Birds can weave even
of-the art anti-creep system. And
the smallest twigs with great precision
precision slides are high quality tools
to form the supporting structure of the
for linear motion which are, ideally
nest for the protection of their eggs
suited for uses in a wide range
and new-born chicks from the weather.
ofapplications where close tolerances
This small miracle of nature has

given SKF the inspiration to create
solutions to satisfy a wide variety of
76
are demanded.
SKF products are created to build
the future.
Fig.18
Modular range rail guides

The modular range consists of a matrix
range of rail guide modules which enable
an individual choice of combinations of rails
and rolling element assemblies. Different
requirements for the guides do not call
for changes in the design or mechanical
environment. Selection of the adequate rail
guide is made depending on the mechanical
conditions of the application.
These operating requirements are
covered by six different models (fig.18)
that may be defined as rail guides with:
2
LWRPM/PV
LWRM/V
LWRE ACSM
cross roller cages for the standard LWR

series
ball cages for the LWRB series
cross roller cages for the optimised LWRE
series
cross roller cages with anti cage-creep
system (ACSM) for the LWRE series
needle roller cages for the LWRM/LWRV
series and
slide liners as raceways for the LWRPM/
LWRPV series.
LWRE
LWR with cross roller cage
LWR with ball cage
Precision rail guides are suitable for

applications with limited strokes requiring
high stiffness and positioning accuracy.
The modular range series of rails makes
it possible to select internal design and/or
rolling elements to suit application
requirements without changing the
envelope dimensions of the rails.
The modular rail range, which is completely
interchangeable, is shown in table17.
This range is suitable for applications with
limited strokes requiring high stiffness and
positioning accuracy.
Table 17
Modular range:
interchangeable
rail programme
Basic load rating
Speed
Noise
Stiffness
Precision
Cross rollers LWR

Cross rollers LWRE
Needle rollers
Slide liners
77
2 Guiding systems
Fig.19
Anti cage-creep system (ACSM)

The ACSM system prevents the cage-creep
effect. It is available for any product from
the LWRE range.
The non-slip effect is achieved by an
involute toothed cogwheel attached to the
cage which is inside the LWRE ACSM rails
during operation, thus retaining the cage
inits defined position. (fig.19).
This system reliably prevents socalled
cage-creep and is mainly used in applications
characterised by high rates of acceleration
and speeds of travel as well as eccentric
loads.
Integration of the ACSM system does
not change the mounting dimensions
of the LWRE rail guides. This enables
LWRE rail guides with ACSM to be used
in existing applications without changing
the adjacent construction and thus
significantly increasing the availability of
these machinery elements. Apart from the
ACSM system, the former version of ACS is
still available. In this version the cogwheel is
made of polymer and the stroke length can
be specified.
LWRE rail guides with ACS system can be
produced in longer sizes.
For further information please consult
the SKF catalogue precision rail guides,
publication number 4183 EN.
Design of an LWRE rail guide with ACSM
ACSM precision rail guides

with innovative cage guidance system
N.B.:
as PDF files.
78
Ordering key
LW
Type
Designation type:
Rail guide (sizes: 3/6/9/12/15/18/24)
Rail guide (sizes: 1/2)
Plastic ball-retaining cage (sizes: 1/2/3/6/9/12)
Cross rollers in plastic cage (size: 3)
Cross rollers in aluminium cage (sizes: 6/9/12)
End stop for low load and horizontal mounting (sizes: 1/2/3/6/9/12/15/18/24)
Special attachment screw (sizes: 3/4/6/9/12/15/18/24)
R
RB
JK
AK
AL
ERA
GD
Rail guide (sizes: 3/4/6/9)

Cross roller plastic cage (sizes: 3/4/6/9)
End stop for general use (sizes: 3/4/6/9/2211)
Special attachment screw (sizes: 3/4/6/9/2211)
Rail guide for needle roller cage (sizes: 6/9)
RE
AKE
ERE
GD
RM
Rail guide for needle roller cage (sizes: 6/9)

Needle rollers in aluminium cage (sizes: 6/9)
Needle rollers in polymer cage (sizes: 6/9)
End stop with plastic wiper for general use (sizes: 6/9)
End stop with plastic wiper for general use (sizes: 6/9)
Special attachment screw (sizes: 6/9)
RV
HW
HV
EARM
EARV
GD
Rail guide (sizes: 3015/4020/5025/6030/7040/8050)

Rail guide (sizes: 3015/4020/5025/6030/7040/8050)
Needle rollers in aluminium cage (sizes: 10/15/20/25/30)
Needle rollers in polymer cage (sizes: 10/15/20/25/30)
End stop with wiper for general use (sizes: 3015/4020/5025/3060/7040/8050)
End stop with wiper for general use (sizes: 3015/4020/5025/3060/7040/8050)
Attachment screw (sizes: M3/M5/M6)
M
V
HW
HV
EAM
DIN 84
EAV
Size*:
Specific values are reported on designation type
Length rail guide (mm):

xxxx
Option:
For R { for size 3/6

e for size 3/4/6

a anti cage-creep system ACSM
For RE d anti cage-creep system ACSM for size 3/6

a anti cage-creep system ACS

x anti cage-creep system ACS for size 3/4/6
*
Sizes 3/4/6=3 digits for length of rail; example: 050

100

...
Size 9=4 digits for length of rail; example:
0300

...

1200
Size 3015=3 digits for length of rail; example: 3015100

3015150

...
Bigger sizes 4 digits for length of rail; example: 50250200

...
KIT
KIT
ACSM
ACSM-KIT
ACS
ACS-KIT
Example 1, rail guide:
LW
RE
6 350
Example 2, cage:
LW
AKE
6 350
Example 3, end stop:
LW
ERE
6 24
Example 4, screws:
LW
GD
ACSM
N.B.:
For information about additional products
and accessories, please contact SKF
Customer Service.
- LWN / LWO (sizes 2025-, 2535-,
3045- and 3555-) - LWML series LWF / LWG series (sizes 412-, 612-,
624-, 1024- and 1434-)
79
2 Guiding systems
LWR../LWRB..
LWR rail guides are well-proven, limitedtravel linear guides used in numerous
applications. They consist oftwo identical
rails where cross roller cages or ball cages
are inserted, depending onthe application
and size.
LWR rail guides with cross roller cages
are robust linear bearings with high
load-carrying capacity. Their special
characteristics make them suitable for
alarge proportion of linear bearing
arrangements with limited travel.
LWRB rail guides with ball cage can be used

to advantage where loads are light and easy
running is required.
They are available for sizes 1 and 2.
Because of the large number of possible
combinations, all components of LWR/LWRB
rail guides must be ordered separately, for
example:
LWR .. KIT
The KIT package for the modular range is a
unique service provided only by SKF.
4 rails LWR
2 cross roller cages LWAL
8 end stops LWERA.
Rails
LWR 3-12
Ball and cross roller cages
LWRB 1+2
End stops
Special attachment screw
LWERA 1+2
LWGD
LWERA 3-24
80
LWR3/6.. KIT
4 rail guides LWR
2 cross roller cages LWAL/LWAK
8 end stops LWERA
Designations
999
1422
1811
2088
2442
2781
3110
Rail
designations
Cage
designations
26
36
46
66
76
86
96
LWR 3050
LWR 3075
LWR 3100
LWR 3125
LWR 3150
LWR 3175
LWR 3200
LWAK 37
LWAK 311
LWAK 315
LWAK 318
LWAK 322
LWAK 326
LWAK 330
Stroke
Rail
designations
Cage
designations
LWR 6100
LWR 6150
LWR 6200
LWR 6250
LWR 6300
LWR 6350
LWR 6400
LWAL 68
LWAL 612
LWAL 616
LWAL 620
LWAL 625
LWAL 629
LWAL 633
mm
1120
1760
2400
2880
3520
4160
4800
* Load ratings for 10 rolling elements

Including 8 end stops LWERA 3
Designations
Load ratings*
dynamic
static
C
C0
N
LWR 6100 KIT
LWR 6150 KIT
LWR 6200 KIT
LWR 6250 KIT
LWR 6300 KIT
LWR 6350 KIT
LWR 6400 KIT
See page 80 for drawing
Stroke
C0
N
LWR 3050 KIT
LWR 3075 KIT
LWR 3100 KIT
LWR 3125 KIT
LWR 3150 KIT
LWR 3175 KIT
LWR 3200 KIT
Load ratings*
dynamic
static
4915
6744
8441
10045
11955
13422
14846
mm
5440
8160
10880
13600
17000
19720
22440
50
78
106
134
144
172
200

Including 8 end stops LWERA 6
81
2 Guiding systems
LWRB1
Designations
Dimensions
A
Load ratings*
dynamic
static
L1
J1
mm
Rails
LWRB 1020
LWRB 1030
LWRB 1040
LWRB 1050
LWRB 1060
8,5
8,5
8,5
8,5
8,5
4
4
4
4
4
20
30
40
50
60
10
10
10
10
10
5
5
5
5
5
G1
mm
M2
M2
M2
M2
M2
1,7
1,7
1,7
1,7
1,7
N1
A1
3
3
3
3
3
1,4
1,4
1,4
1,4
1,4
C0
0,5
2,2
410
580
Designations
Dimensions
B
Load ratings*
dynamic
static
L1
J1
mm
Rails
LWRB 2030
LWRB 2045
LWRB 2060
LWRB 2075
LWRB 2090
LWRB 2105
LWRB 2120
12
12
12
12
12
12
12
6
6
6
6
6
6
6
30
45
60
75
90
105
120
Ball cage
LWJK 2
End stop
LWERA 2
82
See page 80
for drawing
U1
3,9
3,9
3,9
3,9
3,9
1,588 3,5
End stop
LWERA 1
LWRB2
Ball cage
LWJK 1,588
See page 80
for drawing
DW
15
15
15
15
15
15
15
7,5
7,5
7,5
7,5
7,5
7,5
7,5
G1
mm
M3
M3
M3
M3
M3
M3
M3
2,6
2,6
2,6
2,6
2,6
2,6
2,6
N1
A1
DW
U1
C0
4,4
4,4
4,4
4,4
4,4
4,4
4,4
2
2
2
2
2
2
2
5,5
5,5
5,5
5,5
5,5
5,5
5,5
2
1,5
0,75 3
640
720
LWR3
Designations
Dimensions
A
Load ratings*
dynamic
static
L1
J1
mm
Rails
LWR 3050
LWR 3075
LWR 3100
LWR 3125
LWR 3150
LWR 3175
LWR 3200
LWR 3250
LWR 3300
18
18
18
18
18
18
18
18
18
8
8
8
8
8
8
8
8
8
50
75
100
125
150
175
200
250
300
25
25
25
25
25
25
25
25
25
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
G1
mm
M4
M4
M4
M4
M4
M4
M4
M4
M4
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
3,3
N1
A1
DW
6
6
6
6
6
6
6
6
6
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
C0
8,2
8,2
8,2
8,2
8,2
8,2
8,2
8,2
8,2
3
2,5
U1
Roller cage
LWAK 3
End stop
LWERA 3
7,5
1320
1600

LWGD 3
See page 80
for drawing
LWR6
Designations
Dimensions
A
Load ratings*
dynamic
static
L1
J1
mm
Rails
LWR 6100
LWR 6150
LWR 6200
LWR 6250
LWR 6300
LWR 6350
LWR 6400
31
31
31
31
31
31
31
15
15
15
15
15
15
15
100
150
200
250
300
350
400
50
50
50
50
50
50
50
Roller cage
LWAL 6
End stop
LWERA 6
25
25
25
25
25
25
25
G1
N1
A1
mm
M6
M6
M6
M6
M6
M6
M6
5,2 9,5 5,2 14

5,2 9,5 5,2 14
5,2 9,5 5,2 14
5,2 9,5 5,2 14
5,2 9,5 5,2 14
5,2 9,5 5,2 14
5,2 9,5 5,2 14
DW U
C0
6
3
U1
14,8 2,7
5850
6800

LWGD 6
See page 80
for drawing
83
2 Guiding systems
LWR9
Designations
Dimensions
A
Load ratings*
dynamic
static
L1
J1
mm
Rails
LWR 90200
LWR 90300
LWR 90400
LWR 90500
LWR 90600
LWR 90700
44
44
44
44
44
44
22
22
22
22
22
22
200
300
400
500
600
700
100
100
100
100
100
100
Roller cage
LWAL 9
End stop
LWERA 9
LWGD 9
See page 80
for drawing
84
50
50
50
50
50
50
G1
mm
M8
M8
M8
M8
M8
M8
6,8
6,8
6,8
6,8
6,8
6,8
N1
A1
DW
U1
C0
11
11
11
11
11
11
6,2
6,2
6,2
6,2
6,2
6,2
20
20
20
20
20
20
9
20
14
17000
18300

combinations, all components of LWRE
rail guides must be ordered separately, for
example:
LWRE rail guide can be used in agiven

design space, maintaining the same loadcarrying capacity as the LWR.
The mounting and attachment
dimensions of the LWRE 3, 6, 9 rail guides
conform to those of all SKF modular range
rail guides presented inthis catalogue.
LWRE rail guides are optimised with large
rollers and improved internal geometry
providing high load-carrying capacity and
stiffness. They are available with ACSM.
As a standard rail guides with ACSM are
delivered without end face holes. LWRE
rail guides of size 2 are equipped with ball
cages.
LWRE ..
LWRE rail guides are a logical development
of the proven LWR rail guides.
Within the modular range system, the
LWRE rail guides offer an outstanding price/
performance ratio.
Alongside the familiar characteristics
ofthe LWR series, the new LWRE rail guides
offer the advantages of a fivefold increase
in load-carrying capacity and adoubling
ofthe stiffness, achieved through optimised
internal geometry in conjunction with larger
roller diameters.
4 rail guides LWRE

2 cross roller cages LWAKE
8 end stops LWERE
LWRE .. KIT
The KIT package for the modular range is a
unique service provided only by SKF.
Rails
LWRE and LWRE ACS
LWRE ACSM
LWRB ACSM
J3
DW
LWRE ACSM
J3
DW
J1
J
L
J1
LWRE, LWRE ACSM
A1
G1
B
A1
G1
N1
G
N
J2
End stops
G3
N1
G2
G
N
J2
J1
J
L
J1
Cross roller cages
LWAKE 3, 6, 9
LWAKE 3, 6, 9 ACS
LWERE 3, 6, 9
LWAKE 4
LWERE 4
LWAKE 4 ACS
n t
t1
DW
n t
t1
DW
L = n t + 2 t1
LWJK 2 ACSM
L = n t + 2 t1
t3
DW
LWGD
t
DW
LWAKE 3, 6, 9 ACSM
t3
L= n
L= n
t + t3
t + t3
85
2 Guiding systems
LWRE3/6.. KIT
4 rail guides LWRE
2 cross roller LWAKE
8 end stops LWERE
Designations
4230
5803
7263
8644
9964
11238
12471
Cage
designations
25
38
50
63
75
88
100
LWRE 3050
LWRE 3075
LWRE 3100
LWRE 3125
LWRE 3150
LWRE 3175
LWRE 3200
LWAKE 36
LWAKE 39
LWAKE 312
LWAKE 315
LWAKE 318
LWAKE 321
LWAKE 324
Stroke
Rail
designations
Cage
designations
LWRE 6100
LWRE 6150
LWRE 6200
LWRE 6250
LWRE 6300
LWRE 6350
LWRE 6400
LWAKE 67
LWAKE 610
LWAKE 614
LWAKE 617
LWAKE 620
LWAKE 624
LWAKE 627
mm
5100
7650
10200
12750
15300
17850
20400
Load ratings*
dynamic
static
C
C0
N
LWRE 6100 KIT
LWRE 6150 KIT
LWRE 6200 KIT
LWRE 6250 KIT
LWRE 6300 KIT
LWRE 6350 KIT
LWRE 6400 KIT
86
Rail
designations

Including 8 end stops LWERE 3
Designations
Stroke
C0
N
LWRE 3050 KIT
LWRE 3075 KIT
LWRE 3100 KIT
LWRE 3125 KIT
LWRE 3150 KIT
LWRE 3175 KIT
LWRE 3200 KIT
Load ratings*
dynamic
static
25743
34000
44204
51431
58382
67304
73781

mm
27300
39000
54600
66300
78000
93600
105300
46
80
92
126
160
172
208
LWRE3/6.. ACS KIT

4 rail guides LWRE ACS
2 cross roller cages LWAKE
8 end stops LWERE
Designations
4230
5294
6300
7731
9090
9964
11653
Rail
designations
Cage
designations
20
30
45
62
79
94
100
LWRE 3050 ACS

LWRE 3075 ACS
LWRE 3100 ACS
LWRE 3125 ACS
LWRE 3150 ACS
LWRE 3175 ACS
LWRE 3200 ACS
LWAKE 36 ACS
LWAKE 36 ACS
LWAKE 310 ACS
LWAKE 313 ACS
LWAKE 316 ACS
LWAKE 318 ACS
LWAKE 322 ACS
Stroke
Rail
designations
Cage
designations
LWRE 6100 ACS

LWRE 6150 ACS
LWRE 6200 ACS
LWRE 6250 ACS
LWRE 6300 ACS
LWRE 6350 ACS
LWRE 6400 ACS
LWAKE 66 ACS
LWAKE 69 ACS
LWAKE 612 ACS
LWAKE 616 ACS
LWAKE 619 ACS
LWAKE 623 ACS
LWAKE 626 ACS
mm
5100
6800
8500
11050
13600
15300
18700

Designations
Load ratings*
dynamic
static
C
C0
N
LWRE 6100 ACS-KIT
LWRE 6150 ACS-KIT
LWRE 6200 ACS-KIT
LWRE 6250 ACS-KIT
LWRE 6300 ACS-KIT
LWRE 6350 ACS-KIT
LWRE 6400 ACS-KIT
Stroke
C0
N
LWRE 3050 ACS-KIT
LWRE 3075 ACS-KIT
LWRE 3100 ACS-KIT
LWRE 3125 ACS-KIT
LWRE 3150 ACS-KIT
LWRE 3175 ACS-KIT
LWRE 3200 ACS-KIT
Load ratings*
dynamic
static
22826
31318
39196
49056
56093
65107
71640
mm
23400
35100
46800
62400
74100
89700
101400
37
71
105
117
151
163
197

87
2 Guiding systems
LWRE3
Designations
Dimensions
A
Load ratings*
dynamic
static
L
L1
J1
mm
Rails
LWRE 3050
LWRE 3075
LWRE 3100
LWRE 3125
LWRE 3150
LWRE 3175
LWRE 3200
18
18
18
18
18
18
18
8
8
8
8
8
8
8
50
75
100
125
150
175
200
25
25
25
25
25
25
25
12,5
12,5
12,5
12,5
12,5
12,5
12,5
G1
mm
M4
M4
M4
M4
M4
M4
M4
3,3
3,3
3,3
3,3
3,3
3,3
3,3
N1
A1
DW
6
6
6
6
6
6
6
3,2
3,2
3,2
3,2
3,2
3,2
3,2
C0
8,7
8,7
8,7
8,7
8,7
8,7
8,7
4
C
N
Cross roller cage

LWAKE 3
End stop
LWERE 3
6,25 6300
8500

LWGD 3
See page 85
for drawing
LWRE2211
Designations
Dimensions
A
Load ratings*
dynamic
static
L1 J
J1
mm
Rails
LWRE 22110080
LWRE 22110120
LWRE 22110160
LWRE 22110200
LWRE 22110240
LWRE 22110280
LWRE 22110320
LWRE 22110360
LWRE 22110400
22
22
22
22
22
22
22
22
22
11
11
11
11
11
11
11
11
11
80
120
160
200
240
280
320
360
400
40
40
40
40
40
40
40
40
40
Cross roller cage

LWAKE 3
End stop
LWERE 3
See page 85
for drawing
88
20
20
20
20
20
20
20
20
20
G1
mm
M5
M5
M5
M5
M5
M5
M5
M5
M5
4,3
4,3
4,3
4,3
4,3
4,3
4,3
4,3
4,3
N1
A1
DW t
t2
C0
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
4,1
4,1
4,1
4,1
4,1
4,1
4,1
4,1
4,1
11
11
11
11
11
11
11
11
11
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
2,65
4
t1
6,25
3,6
3,6
3,6
3,6
3,6
3,6
3,6
3,6
3,6
6300
8500
LWRE6
Designations
Dimensions
A
Load ratings*
dynamic
static
L
L1
J1
mm
Rails
LWRE 6100
LWRE 6150
LWRE 6200
LWRE 6250
LWRE 6300
LWRE 6400
31
31
31
31
31
31
15
15
15
15
15
15
100
150
200
250
300
400
50
50
50
50
50
50
25
25
25
25
25
25
G1
mm
M6
M6
M6
M6
M6
M6
5,2
5,2
5,2
5,2
5,2
5,2
N1
A1
DW
9,5
9,5
9,5
9,5
9,5
9,5
5,2
5,2
5,2
5,2
5,2
5,2
C0
15
15
15
15
15
15
8
C
N
Cross roller cage

LWAKE 6
End stop
LWERE 6
11
34000
39000

LWGD 6
See page 85
for drawing
LWRE9
Designations
Dimensions
A
Load ratings*
dynamic
static
L
L1
J1
mm
Rails
LWRE 90200
LWRE 90300
LWRE 90400
LWRE 90500
LWRE 90600
LWRE 90700
44
44
44
44
44
44
22
22
22
22
22
22
200
300
400
500
600
700
100
100
100
100
100
100
Cross roller cage

LWAKE 9
End stop
LWERE 9
50
50
50
50
50
50
G1
mm
M8
M8
M8
M8
M8
M8
6,8
6,8
6,8
6,8
6,8
6,8
N1
A1
DW
C0
11
11
11
11
11
11
6,2
6,2
6,2
6,2
6,2
6,2
22
22
22
22
22
22
12
16
78000
78000

LWGD 9
See page 85
for drawing
89
2 Guiding systems
LWRB2..ACSM and
LWRE 3/6/9..ACSM
Designations
Dimensions
A
Attachment holes
A1
DW
J1
End face holes

J2
mm
G1
mm
N1
J3
G2
G3
mm
LWRB 2 ACSM
12
5,5
15
7,5
2,5
M3
2,55
4,4
2,7
M2,5 3
LWRE 3 ACSM
LWRE 6 ACSM
LWRE 9 ACSM
18
31
44
8
15
22
8,7
15,2
21,7
4
8
12
25
50
100
12,5
25
50
3,5
6
9
M4
M6
M8
3,3
5,2
6,8
6
9,5
10,5
3,2
5,2
6,2
4
6,75
9,75
M3
M5
M6
6
9
9
See page 85
for drawing
LWJK 2 and LWAKE 3/6/9 ACSM
Designations
Dimensions
DW
Load ratings*
dynamic
static
t3
mm
90
Suitable rail
guide
C0
LWJK 2 ACSM
3,9
3,9
510
650
LWRB 2 ACSM
LWAKE 3 ACSM
LWAKE 6 ACSM
LWAKE 9 ACSM
4
8
12
6,25
11
16
9
15,3
22
5040
27200
62400
8160
37440
74880
LWRE 3 ACSM
LWRE 6 ACSM
LWRE 9 ACSM
* Load ratings for 10 rolling elements per row
LWRE3.. ACSM KIT

4 rail guides LWRE ACSM
2 cross roller LWAKE ACSM
Designations
Load ratings*
dynamic
static
C
C0
N
LWRE 3050 ACSM-KIT
LWRE 3075 ACSM-KIT
LWRE 3100 ACSM-KIT
LWRE 3125 ACSM-KIT
LWRE 3150 ACSM-KIT
LWRE 3175 ACSM-KIT
LWRE6.. ACSM KIT
2940
3380
5040
6180
7270
7970
Cage
designations
4 pieces
2 pieces
LWRE 3050 ACSM

LWRE 3075 ACSM
LWRE 3100 ACSM
LWRE 3125 ACSM
LWRE 3150 ACSM
LWRE 3175 ACSM
LWAKE 35 ACSM
LWAKE 36 ACSM
LWAKE 310 ACSM
LWAKE 313 ACSM
LWAKE 316 ACSM
LWAKE 318 ACSM
mm
4080
4900
8160
10610
13060
14690
20
30
45
62
79
94
Designations
Load ratings*
dynamic
static
C
LWRE 6100 ACSM-KIT

LWRE 6150 ACSM-KIT
LWRE 6200 ACSM-KIT
LWRE 6250 ACSM-KIT
LWRE 6300 ACSM-KIT
LWRE 6350 ACSM-KIT
LWRE 6400 ACSM-KIT
18260
25050
31360
39240
44870
52090
57310
Stroke Rail
designations
Cage
designations
C0
Stroke Rail
designations
mm
22460
33700
44930
59900
71140
86110
97340
37
71
105
117
151
163
197
LWRE 6100 ACSM

LWRE 6150 ACSM
LWRE 6200 ACSM
LWRE 6250 ACSM
LWRE 6300 ACSM
LWRE 6350 ACSM
LWRE 6400 ACSM
LWAKE 66 ACSM
LWAKE 69 ACSM
LWAKE 612 ACSM
LWAKE 616 ACSM
LWAKE 619 ACSM
LWAKE 623 ACSM
LWAKE 626 ACSM
91
2 Guiding systems
LWRE3 ACS
Designations
Dimensions
A
Load ratings*
dynamic
static
L1 J
J1
mm
Rails
LWRE 3050 ACS
LWRE 3075 ACS
LWRE 3100 ACS
LWRE 3125 ACS
LWRE 3150 ACS
LWRE 3175 ACS
LWRE 3200 ACS
18
18
18
18
18
18
18
8
8
8
8
8
8
8
50
75
100
125
150
175
200
25
25
25
25
25
25
25
12,5
12,5
12,5
12,5
12,5
12,5
12,5
G1
mm
M4
M4
M4
M4
M4
M4
M4
3,3
3,3
3,3
3,3
3,3
3,3
3,3
N1
A1
DW t
6
6
6
6
6
6
6
3,2
3,2
3,2
3,2
3,2
3,2
3,2
8,7
8,7
8,7
8,7
8,7
8,7
8,7
C0
9
9
9
9
9
9
9
4
C
N
Cross roller cage

LWAKE 3 ACS
End stop
LWERE 3
t3
6,25
6300
8500

LWGD 3
See page 85
for drawing
LWRE2211 ACS
Designations
Dimensions
A
Load ratings*
dynamic
static
J
J1
mm
Rails
LWRE 22110080 ACS
LWRE 22110120 ACS
LWRE 22110160 ACS
LWRE 22110200 ACS
LWRE 22110240 ACS
LWRE 22110280 ACS
LWRE 22110320 ACS
LWRE 22110360 ACS
LWRE 22110400 ACS
22
22
22
22
22
22
22
22
22
Cross roller cage

LWAKE 3 ACS
End stop
LWERE 3
See page 85
for drawing
92
11
11
11
11
11
11
11
11
11
80
120
160
200
240
280
320
360
400
40
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
20
20
G1
mm
M5
M5
M5
M5
M5
M5
M5
M5
M5
4,3
4,3
4,3
4,3
4,3
4,3
4,3
4,3
4,3
N1
A1
DW t
t3
C0
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
4,1
4,1
4,1
4,1
4,1
4,1
4,1
4,1
4,1
11
11
11
11
11
11
11
11
11
9
9
9
9
9
9
9
9
9
4
6,25
6300
8500
LWRE6 ACS
Designations
Dimensions
A
Load ratings*
dynamic
static
L1 J
J1
mm
Rails
LWRE 6100 ACS
LWRE 6150 ACS
LWRE 6200 ACS
LWRE 6250 ACS
LWRE 6300 ACS
LWRE 6400 ACS
31
31
31
31
31
31
15
15
15
15
15
15
100
150
200
250
300
400
50
50
50
50
50
50
25
25
25
25
25
25
G1
mm
M6
M6
M6
M6
M6
M6
5,2
5,2
5,2
5,2
5,2
5,2
N1
A1
DW t
9,5
9,5
9,5
9,5
9,5
9,5
5,2
5,2
5,2
5,2
5,2
5,2
15
15
15
15
15
15
C0
15,3
15,3
15,3
15,3
15,3
15,3
8
C
N
Cross roller cage

LWAKE 6 ACS
End stop
LWERE 6
t3
11
34000
39000

LWGD 6
See page 85
for drawing
LWRE9 ACS
Designations
Dimensions
A
Load ratings*
dynamic
static
L1 J
J1
mm
Rails
LWRE 90200 ACS
LWRE 90300 ACS
LWRE 90400 ACS
LWRE 90500 ACS
LWRE 90600 ACS
LWRE 90700 ACS
44
44
44
44
44
44
22
22
22
22
22
22
200
300
400
500
600
700
100
100
100
100
100
100
Cross roller cage

LWAKE 9 ACS
End stop
LWERE 9
50
50
50
50
50
50
G1
mm
M8
M8
M8
M8
M8
M8
6,8
6,8
6,8
6,8
6,8
6,8
N1
A1
DW t
C0
11
11
11
11
11
11
6,2
6,2
6,2
6,2
6,2
6,2
22
22
22
22
22
22
22
22
22
22
22
22
12 16
t3
78000
78000

LWGD 9
See page 85
for drawing
93
2 Guiding systems
LWRM ../LWRV ..
Guiding systems with high load carrying
capacity and maximum stiffness.
Needle roller cages for LWRM/LWRV rail
guides
LWHW needle roller cages are made out of
aluminium which provide retention of the
needle rollers. They are available for size 6
and 9 units.
When ordering, the appropriate cage
length in mm must be stated after the cage
designation, e. g: LWHW 10225.
End stops for LWRM/LWRV rail guides.

End stops serve to restrict the drift of the
needle roller cage from the loaded zone.
LWEARM and LWEARV end stops are
fitted with a plastic wiper with a sealing lip
serving to reduce the risk of contamination
of the raceways.
All end stops are supplied with the
necessary attachment screws.
The mounting and attachment dimensions
of the LWRM/LWRV rail guides conform to
those of the other SKF modular range rail
guides included in this catalogue.

combinations, all components ofLWRM/
LWRV rail guides must be ordered
separately, for example:
2
2
2
4
rail guides LWRM

rail guides LWRV
needle roller assemblies LWHW
end stops LWEARM.
Rails
LWRM
LWRV
End stops
Needle roller cage
wiper
LWEARV
with wiper
wiper
LWEARM
with wiper
94
LWHW
Aluminium
LWGD
LWRM6/LWRV6
Designations
Dimensions
A
Load ratings*
dynamic
static
L1 J
J1
mm
Rails
LWRM/LWRV 6100
LWRM/LWRV 6150
LWRM/LWRV 6200
LWRM/LWRV 6250
LWRM/LWRV 6300
LWRM/LWRV 6400
31
31
31
31
31
31
15
15
15
15
15
15
100
150
200
250
300
400
50
50
50
50
50
50
25
25
25
25
25
25
G1
mm
M6
M6
M6
M6
M6
M6
5,2
5,2
5,2
5,2
5,2
5,2
N1
A1 A2 A3 DW U
9,5
9,5
9,5
9,5
9,5
9,5
5,2
5,2
5,2
5,2
5,2
5,2
17
17
17
17
17
17
18
18
18
18
18
18
C0
11
11
11
11
11
11
2
C
N
Needle roller cage

LWHW 10
End stops
LWEARM 6
LWEARV 6
10 3,75 10400
25500
6
6

LWGD 6
See page 94
for drawing
LWRM9/LWRV9
* For 10 needle rollers per row
Designations
Dimensions
A
Load ratings*
dynamic
static
L1 J
J1
mm
Rails
LWRM/LWRV 90200
LWRM/LWRV 90300
LWRM/LWRV 90400
LWRM/LWRV 90500
44
44
44
44
22
22
22
22
200
300
400
500
100
100
100
100
Needle roller cage

LWHW 15
End stops
LWEARM 9
LWEARV 9
50
50
50
50
G1
mm
M8
M8
M8
M8
6,8
6,8
6,8
6,8
N1 A1
A2 A3 DW U
C0
11
11
11
11
6,2
6,2
6,2
6,2
23,1
23,1
23,1
23,1
27
27
27
27
17
17
17
17
2
15 4,5
16300
45000
8,3
8,3

LWGD 9
See page 94
for drawing
95
2 Guiding systems
LWM ../LWV ..
These rail guides enable the design of
linear guiding systems for heavy loads with
maximum stiffness. The internal geometry
is identical with that of the modular range
rails of the LWRM/LWRV series. As the same
needle roller cage is used, the load bearing
characteristics are identical. The external
dimensions of the LWM/LWV rail guides,
however, differ slightly from those of the
LWRM/LWRV modular range dimensions.
LWM/LWV rail guides are widely used in
machine tools. LWM/LWV rail guides have
as standard an attachment hole type 15, i.e.
through hole with countersinking.
If attachment hole type 13 is ordered,

corresponding threaded inserts are supplied
along with the guide.
For new designs, LWRM/LWRV rail
guides are recommended. These offer the
advantage of being interchangeable with
other rail guides of the modular range.
End stops for LWM/LWV rail guides

LWEAM and LWEAV end stops are fitted
with a plastic wiper with sealing lip which
serves to keep the track free from dirt.
All end pieces are supplied together with
attachment screws.
Needle roller cages for LWM/LWV rail

guides
LWHW needle roller cages comprise
an aluminium cage with needle rollers
arranged at right angles to each other.
The needle rollers are retained by the cage.
Rails
Hole type 13
Hole type 13
LWM rail
Hole type 15
LWV rail
Hole type 15
End stops
Needle roller cage
wiper
LWEAM with wiper
wiper
LWEAV with wiper
96
LWHW
Aluminium
LWGD
LWM3015/
LWV3015
Designations
Dimensions
A
Load ratings*
dynamic static
L1 J1) J1min2) G
mm
Rails
LWM/LWV 3015100
LWM/LWV 3015150
LWM/LWV 3015200
LWM/LWV 3015300
LWM/LWV 3015400
30
30
30
30
30
15
15
15
15
15
100
150
200
300
400
40
40
40
40
40
15
15
15
15
15
mm
M4
M4
M4
M4
M4
8,5
8,5
8,5
8,5
8,5
N1 N2
A1 A2
A3
DW U
4,5
4,5
4,5
4,5
4,5
5,25
5,25
5,25
5,25
5,25
16
16
16
16
16
17,2
17,2
17,2
17,2
17,2
C0
10,5
10,5
10,5
10,5
10,5
2
C
N
Needle roller cage

LWHW10
End stops
LWEAM 3015
LWEAV 3015
10 3,75 10400
25500
6
6
Appropriate attachment screw

M4 DIN 84
See page 96
for drawing
LWM4020/
LWV4020

1)
For lengths L < J + 2 J1min, J = 50 mm (except for LWM/LWV 3015)
2)
J1 depends upon the rail length and is of the same size at each end of the rail: J1 = (L J)/2
Designations
Dimensions
A
Load ratings*
dynamic static
L1 J1) J1min2) G
mm
Rails
LWM/LWV 4020100
LWM/LWV 4020150
LWM/LWV 4020200
LWM/LWV 4020300
LWM/LWV 4020400
40
40
40
40
40
20
20
20
20
20
100
150
200
300
400
80
80
80
80
80
15
15
15
15
15
mm
M6
M6
M6
M6
M6
11,5
11,5
11,5
11,5
11,5
N1 N2 A1
A3
DW U
6,8
6,8
6,8
6,8
6,8
7,5
7,5
7,5
7,5
7,5
22,3
22,3
22,3
22,3
22,3
22
22
22
22
22
C0
13,5
13,5
13,5
13,5
13,5
2
Needle roller cage

LWHW 15
End stops
LWEAM 4020
LWEAV 4020
A2
15 4,5
16300
45000
8,3
8,3

M6 DIN 84
See page 96
for drawing

1)
2)
97
2 Guiding systems
LWM5025/
LWV5025
Designations
Dimensions
A
Load ratings*
dynamic static
L1 J1) J1min2) G
mm
Rails
LWM/LWV 50250100
LWM/LWV 50250200
LWM/LWV 50250300
LWM/LWV 50250400
LWM/LWV 50250500
50
50
50
50
50
25
25
25
25
25
100
200
300
400
500
80
80
80
80
80
20
20
20
20
20
N1
mm
M6
M6
M6
M6
M6
11,5
11,5
11,5
11,5
11,5
N2
A1 A2
A3 DW U
6,8
6,8
6,8
6,8
6,8
7,5
7,5
7,5
7,5
7,5
28
28
28
28
28
28
28
28
28
28
C0
17
17
17
17
17
2
C
N
Needle roller cage

LWHW 15
End stops
LWEAM 5025
LWEAV 5025
15 4,5
16300
45000
8,9
8,9

M6 DIN 84
See page 96
for drawing
LWM6035/
LWV6035

1)
2)
Designations
Dimensions
A
Load ratings*
dynamic static
L1 J1)
J1min2) G
mm
Rails
LWM/LWV 60350200
LWM/LWV 60350300
LWM/LWV 60350400
LWM/LWV 60350500
LWM/LWV 60350600
LWM/LWV 60350700
LWM/LWV 60350800
LWM/LWV 60350900
LWM/LWV 60351000
60
60
60
60
60
60
60
60
60
35
35
35
35
35
35
35
35
35
200
300
400
500
600
700
800
900
1 000
100
100
100
100
100
100
100
100
100
20
20
20
20
20
20
20
20
20
mm
M8
M8
M8
M8
M8
M8
M8
M8
M8
15
15
15
15
15
15
15
15
15
N1 N2
9
9
9
9
9
9
9
9
9
10
10
10
10
10
10
10
10
10
98
DW U
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
C0
20
20
20
20
20
20
20
20
20
2,5 20 5,5
8,9
8,9

M8 DIN 84
See page 96
for drawing
A3
Needle roller cage

LWHW 20
End stops
LWEAM 6035
LWEAV 6035
A1 A2

1)
2)
32000
88000
LWM7040/
LWV7040
Designations
Dimensions
A
Load ratings*
dynamic static
L1 J1)
J1min2) G
mm
Rails
LWM/LWV 70400200
LWM/LWV 70400300
LWM/LWV 70400400
LWM/LWV 70400500
LWM/LWV 70400600
LWM/LWV 70400700
LWM/LWV 70400800
LWM/LWV 70400900
LWM/LWV 70401000
70
70
70
70
70
70
70
70
70
40
40
40
40
40
40
40
40
40
200
300
400
500
600
700
800
900
1 000
100
100
100
100
100
100
100
100
100
20
20
20
20
20
20
20
20
20
mm
M10
M10
M10
M10
M10
M10
M10
M10
M10
18,5
18,5
18,5
18,5
18,5
18,5
18,5
18,5
18,5
N1 N2
A1 A2 A3
DW U
11
11
11
11
11
11
11
11
11
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
12,5
40
40
40
40
40
40
40
40
40
42
42
42
42
42
42
42
42
42
C0
24
24
24
24
24
24
24
24
24
3
C
N
Needle roller cage

LWHW 25
End stops
LWEAM 7040
LWEAV 7040
25 6
52000
143000
8,9
8,9

M10 DIN 84
See page 96
for drawing
LWM8050/
LWV8050

1)
2)
Designations
Dimensions
A
Load ratings*
dynamic static
L1 J1)
J1min2) G
mm
Rails
LWM/LWV 80500200
LWM/LWV 80500300
LWM/LWV 80500400
LWM/LWV 80500500
LWM/LWV 80500600
LWM/LWV 80500700
LWM/LWV 80500800
LWM/LWV 80500900
LWM/LWV 80501000
80
80
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
200
300
400
500
600
700
800
900
1 000
100
100
100
100
100
100
100
100
100
20
20
20
20
20
20
20
20
20
mm
M12
M12
M12
M12
M12
M12
M12
M12
M12
20
20
20
20
20
20
20
20
20
N1 N2 A1 A2
DW U
13
13
13
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
45
45
45
45
45
45
45
45
45
48,5
48,5
48,5
48,5
48,5
48,5
48,5
48,5
48,5
C0
26
26
26
26
26
26
26
26
26
3,5 30
Needle roller cage

LWHW 30
End stops
LWEAM 8050
LWEAV 8050
A3
76500
212000
8,9
8,9

M12 DIN 84
See page 96
for drawing

1)
2)
99
2 Guiding systems
LWRPM ../LWRPV ..
LWRPM/LWRPV rail guides are linear guides
for limited travel, fitted with Turcite-B1)
slide liners. Based on PTFE, this material is
self-lubricating and offers excellent sliding
properties.
The slide liners are bonded to the
nonhardened LWRPM rail and subsequently
ground to size. The LWRPV rail is hardened
and ground. In order to avoid damage
to the slide surface of the LWRPM rail,
the leading edges of the LWRPV rails are
slightly rounded. Otherwise, the dimensions
of these rails are the same as those of the
LWRV series.
LWRPM/LWRPV rail guides should
be used where rail guides with rolling
element assemblies are unsuitable due
to external influences. Such applications
include those subjected to high transverse

acceleration that may cause indentation
of the rolling elements in the raceways, or
where extremely short strokes are required.
The unfavourable tribological conditions
produced by such operation would give rise
to race-way pitting in a rolling element rail
guide.
The mounting and attachment dimensions
of the LWRPM/LWRPV rail guides conform
to those of all the SKF Modular Range rail
guides included in this catalogue. LWRPM/
LWRPV rail guides are characterised by:
stick-slip-free operation
smooth running
good emergency running properties
low wear and high reliability
insensitivity to contamination
excellent vibration damping properties
Rails
LWRPM
LWRPV
100
When ordering, the individual

components of the rail guides must be
specified separately, for example:
2 rails LWRPM 6300
2 rails LWRPV 6300
LWRPM rail guides are provided with the
slide liners already bonded to the raceways.
Due to their design rail guides of these
series do not require the use of end stops.
Seperate ordering of the slide liners and
end stops is not required.
1)
Turcite-B is a registered trademark of Busak &
Shamban GmbH
LWRPM 3/6/9
Designations
Dimensions
A
Load ratings*
dynamic
A1
A2
A3
J1
J2
mm
Rails
LWRPM 3
LWRPM 6
LWRPM 9
See page 100

for drawing
LWRPV 3/6/9
18
31
44
8
15
22
9,5
16,6
23,1
25
12,5 3,5
50
25
6
100 50
9
G3
mm
M4
M6
M8
3,3
5,2
6,8
N1
C
N
6
3,2
9,5 5,2
10,5 6,2
300/100 mm
700/100 mm
1200/100 mm
* For a surface loading of approximately 1 N/mm2 (momentary loads of up to 6 N/mm2 are permissible).
Designations
Dimensions
A
Load ratings*
dynamic
A1
A2
A3
J1
J2
mm
Rails
LWRPV 3
LWRPV 6
LWRPV 9
See page 100

for drawing
18
31
44
8
15
22
9,6 6,45 25
12,5 3,5
17,8 10,8 50
25
6
26,9 16,6 100 50
9
G3
mm
M4
M6
M8
3,3
5,2
6,8
N1
C
N
6
3,2
9,5 5,2
10,5 6,2
* For a surface loading of approximately 1 N/mm2 (momentary loads of up to 6 N/mm2 are permissible).
101
2 Guiding systems
Applications

Linear motor table
Gantry systems
a) Precision rail guides
Machine tool
Stone/glass cutting
102

Notes
103
Some things are made to

withstand the test of time
The thread of a cobweb is proportionally
a corrosive environment, at the same
more resistant than any material ever
time providing the highest quality of
invented by man even a steel cable.
performance with long-term reliability
Here we see just one of the wonders
for all your applications.
of nature which have inspired SKF to

develop products that will last for many
years to come.
Screws, guidance systems and
many other components bearing the
name of SKF are made from stainless
steel and are designed to withstand
104
With SKF, technology lasts.
Driving systems
Ball and roller screw
Fig.1
SKF ball & roller screw assemblies are highquality products, suitable for a wide range
of applications where precision driving
systems are needed.
The high efficiency screw allows loads to
be displaced by transforming rotary action
into linear motion. The high efficiency
screw has rolling elements, balls or rollers,
between the nut and the screw shaft.
In all types of ball screws (figs.1, 2
and3), the load is transmitted from the
screw shaft to the nut through each ball:
several recirculating systems are available.
To improve positioning accuracy, backlash
can be reduced or eliminated.
Roller screws (fig.4) are available in
two non-competing designs which cover
requirements beyond ball screw limitations.
Load transfer from the nut to the screw
shaft through a number of threaded or
grooved rollers results in a large number of
strong contact points.
Fig.2
Fig.4
Fig.3

Table1
Positioning
systems

Linear motors
Roller screws
Actuation
systems
Electro-mechanical
actuators
100-1 000
Ball screws
10-100
1-10
Profile rail guides
0,1-1
Driving systems
Standard slides
Guiding systems
Operating
precision (m)
105
3 Driving systems
Ball and roller screw
How to make your choose

In our wide range of products, you are
sure to find the one that exactly fits your
requirements:
The miniature ball screws (fig.5), either
with ball recirculation by integrated
tube or with inserts, are very compact.
Backdriving makes them highly efficient.
The large ball screws (fig.6) enable you
to select the right level of requirements:
simple transport screws, very fast screws
with long lead, or preloaded screws for
more precision.
Ground ball screws (fig.7) for more
rigidity and precision
Roller screws (fig.8) which are far
beyond the limits of any ball screws
for heavy loads, ultimate precision and
rigidity, high speed and acceleration and
use in very difficult environments.
Fig.5
Fig.6
Fig.7
Fig.8
Table2 will assist you in your selection.
Table 2
Type
Details
Basic dynamic
load rating
Precision
Ep () on 300 mm
Up to 7,6 kN
G9 (130 )
to G5 (23 )
Good
Up to 95 kN
G9 (130 )
to G5 (23 )
Satisfactory
PGFE, PGFJ,
PGFM, SGFE
16 to 125 mm
Up to 680 kN
G5 (23 )
to G1 (6 )
Satisfactory
SRC, SRF,
TRK/PRK, SVC, PVK
8 to 210 mm
Up to 2 235 kN
G5 (23 )
to G1 (6 )
Exceptional
SD/BD/SH
Diameter
6 to 16 mm
SX/BX, SN/BN/PN
SND/BND/PND
SL/BL, SLD/BLD
Din standard
16 to 63 mm
106
High duty cycles
Adverse
environment
(Spec. steel, pollution)
Ball screws
Fig.9
Rolled ball screws

SKF ball screw assemblies are high-quality
products, suitable for a wide range of
applications where precision driving systems
are needed.
SKF rolled thread ball screws are available
in four designs to cover most requirements.
Complete assemblies
A complete range of accessories is available

and can be delivered completely assembled.
Just ask when ordering (fig.9).
Service range
General rules
Delivery time
Delivery time from a couple of days to max. two weeks is possible for orders meeting the following conditions:
Quantity
Max. 5 pcs. for types SX/BX - SN/BN/PN - SL/BL

Max. 15 pcs. for types SH - SD/BD
Materials
Both shafts and nuts should be made of standard steel (refer to our catalogue 4141). Neither stainless steel nor special treatments
are accepted through this quick channel.
Capabilities
Standard nuts, including DIN nuts

Screw shafts as per customer drawing (splines & special treatments excepted)
Preload by oversized balls accepted for BX - BN/BND - BL/BLD. Preload not accepted for screws with diameters equal to or less
than 16 mm (BH- BD - BN - BND)
Rotating nut, SLT/BLT is excluded
Diameters
Leads
Nut types
Precision classes
Accessories
From 6 to 63 mm
From 2 to 50 mm
Cylindrical and flanged with axial play,

backlash elimination and/or nuts preload,
SKF & DIN standards
G5 - G7 - G9
For screw shafts and nuts
Ball screws
N.B.:
as PDF files.
107
3 Driving systems
Ball screws
Ordering key
Nut type:
Miniature screw, axial play,
internal recirculation nut
Miniature screw, backlash elimination
by oversize balls
Miniature screw, axial play,
recirculation by integrated tube
Universal screw, axial play
Universal screw, backlash elimination
by oversize balls
Precision screw, axial play
Precision screw, backlash elimination
by oversize balls
Precision screw, axial play, DIN nut
Precision screw, backlash elimination
by oversize balls, DIN nut
Precision screw, with optimal rigidity
Precision screw, with optimal rigidity,
DIN nut
Long lead screw, axial play
Long lead screw, axial play, DIN nut
Long lead screw, backlash elimination
by oversize balls
Long lead screw, backlash elimination
by oversize balls, DIN nut
Rotating nut with axial play
Rotating nut with backlash elimination
SD
BD
SH
SX
BX
SN
BN
SND
BND
PN
PND
SL
SLD
BL
BLD
SLT
TLT
Nominal diameter lead (mm)

Hand:
Right
Left (on request)
R
L
Threaded length/Total length (mm)

Lead precision:

G9, G7, G5
Nut orientation:
Threaded side or flange of nut towards shorter (S) or longer (L) machined end of shaft
In case of same end machining ()
Machined end combination:
See page 118121
Required lengths for AA - SA (both sides):
See page 118
**/**
Wipers:
With wipers
Without wipers
Safety ring (for SH - SD only)
WPR
NOWPR
RING
Example:
108
PND
325
330 / 445
G7
L - SA
+K
25 / 20
NOWPR
SD/BD - Miniature ball screws
Designations
Ball recirculation in composite inserts,

threaded end for easy mounting.
SD: axial play
BD: backlash elimination by oversize balls
d0
d2
A2
h10
g6
mm
D2
M
d2
d0
d1
D3
d1
C0
kN
A2
Ball recirculation in tube inside the nut,

threaded end for easy mounting
SD/BD 82,5R
SD/BD 102R
SD/BD 104R
SD/BD 122R
SD/BD 124R
SD/BD 125R
SD/BD 144R
SD/BD 162R
SD/BD 165R
SD/BD 1610R
8
10
10
12
12
12
14
16
16
16
Designations
Dimensions
2,5
2
4
2
4
5
4
2
5
10
7,6
9,5
8,9
11,2
11,3
11,8
13,7
15,5
15,2
15,2
6,3
8,3
7,4
9,8
9,4
9,3
11,9
14,3
12,7
12,6
1000
1000
1000
2000
2000
2000
2000
2000
2000
2000
23,5
22
22
20
34
36
30
27
42
46
17,5
19,5
21
20
25,5
23
27
29,5
32,5
32,5
M151
M171
M181
M181
M201
M201
M221,5
M251,5
M261,5
M261,5
d0
Ph
d1
d2
Max
mm
SH 62R
SH 103R
SH 12,712,7R
2,2
2,5
4,5
2,9
5
4,2
6
3,3
7,6
10,7
2,6
3,5
5,4
4,6
6,5
5,3
9
6,2
10,5
17
Basic load
ratings
dynamic static
A2
D2
7,5
7,5
8
8
10
10
8
12
12
12
Lead
d0
d1
d2
Ph
Max
SH - Miniature ball screws
D3
Basic load
ratings
dynamic static
Lead
A
A1
N
A1
Dimensions
6
2
6
10 3
9,9
12,7 12,7 13
A2
h10
g6
C0
kN
4,7 1000 20
7,9 1000 29
10,2 2000 50
7,5 16,5 M141

1,2
9
21
M181
2,3
12 29,5 M251,5 5,3
1,5
3,5
9
Symbols, see page 157
109
3 Driving systems
Ball screws
SX/BX - Universal ball screws
threaded end for easy mounting,
accessories see pages 111 and 122123.
Steel inserts optional.
SX: axial play
BX: backlash elimination by oversize balls
A1
1 x45
1 x45
A3
A2
A
90
(b)
110
Legend:
(a) = wiper
(b) = lubrication
d2
(a)
d1
(a)
Designations
Dimensions
Basic load
ratings
dynamic static
Lead
d0
Ph
d1
d2
A2
Max
h10
g6
mm
SX/BX 205R
SX/BX 255R
SX/BX 2510R
SX/BX 325R
SX/BX 3210R
SX/BX 405R
SX/BX 4010R
SX/BX 5010R
SX/BX 6310R
20
25
25
32
32
40
40
50
63
C0
kN
5
5
10
5
10
5
10
10
10
19,4
24,6
24,6
31,6
32
39,6
39,4
49,7
62,8
16,7
21,7
20,5
28,7
27,8
36,7
34
44
57
4700
4700
4700
5700
5700
5700
5700
5700
5700
54
69
87
64
95
65
105
135
135
14
19
19
19
19
19
24
29
29
38
43
43
52
54
60
65
78
93
M351,5
M401,5
M401,5
M481,5
M481,5
M561,5
M602
M722
M852
14,5
19,4
25,8
22,1
28,9
24,1
63,6
81,9
91,7
24,4
37,8
43,7
50,5
55,7
63,2
127,1
189,1
243,5
FHRF
Designations
Round flanges (for SX nuts only)
Dimensions
Lead
d0
Ph
A1
A1
h14
h14
JS12
h12
55
70
88
70
96
70
111
136
136
15
20
20
20
20
20
25
30
30
44
50
50
59
59
69
76
91
106
52
60
60
69
69
82
92
110
125
A1
h14
h14
JS12
h12
55
70
88
70
96
70
111
136
136
15
20
20
20
20
20
25
30
30
45
52
52
60
60
70
78
94
104
60
70
70
80
80
90
100
120
130
d0
mm
FHRF 20
FHRF 25
FHRF25
FHRF 32
FHRF 32
FHRF 405
FHRF 4010
FHRF 50
FHRF 63
20
25
25
32
32
40
40
50
63
Designations
Dimensions
Lead
5
5
10
5
10
5
10
10
10
FHSF
Square flanges (for SX nuts only)
d0
Ph
A1
mm
d0
FHSF 20
FHSF 25
FHSF 25
FHSF 32
FHSF 32
FHSF 405
FHSF 4010
FHSF 50
FHSF 63
20
25
25
32
32
40
40
50
63
5
5
10
5
10
5
10
10
10
J1
111
3 Driving systems
Ball screws
SN/BN - Precision ball screws
Ball recirculation in composite inserts. Steel
insert optional.
SN: axial play
BN: backlash elimination by oversize balls.
Designations
A2
d0
D1
D -0,2
-0,5
d1
d2
D +0,2
-0,2
Ball recirculation in composite inserts, Din

standard. Steel insert optional.
SND: axial play
BND: backlash elimination by oversize balls.
L 10
L 11
L7
L1
L tn
L8
2230'
(a) M8x1
(6x) D 5
(8x) D 5
IT11
IT11
L8
30
90
30
90
Design 1
Design 2
Legend:
(a) = lubrication hole
D1
d0
d1
d2
D4
-0,3
-0,5
D1
D6
d2
A2 D
Max
D1
g9
Ca
SN/BN 165R
SN/BN 205R
SN/BN 255R
SN/BN 2510R
SN/BN 325R
SN/BN 3210R
SN/BN 405R
SN/BN 4010R
SN/BN 5010R
SN/BN 6310R
16
20
25
25
32
32
40
40
50
63
Coa
JS12 6x
kN
5
5
5
10
5
10
5
10
10
10
15,2
19,4
24,6
24,6
31,6
32
39,6
39,4
49,7
62,8
12,7
16,7
21,7
20,5
28,7
27,8
36,7
34
44
57
2000
4700
4700
4700
5700
5700
5700
5700
5700
5700
43,5
46,5
46,5
75
51,5
79
58,5
93
99
103
10
12
12
10
12
16
14
16
16
20
28
33
38
43
45
54
53
63
72
85
48
57
62
67
70
87
80
95
110
125
38
45
50
55
58
70
68
78
90
105
M5
M6
M6
M6
M6
M8
M6
M8
M10
M10
8,1
11,7
13
25,8
19,1
22,6
25,4
63,6
70,6
78,4
12,4
18,3
22,7
43,7
40,4
41,8
63,2
127,1
157,6
202,9
Basic load ratings

dynamic static
Design
SND/BND - Precision ball screws
112
d1
D5
(a) M6x1
Ph
mm
A3
Basic load
ratings
dynamic static
Lead
A
A1
Dimensions
Designations
Dimensions
Lead
d0
Ph
d1
d2
L
Max
D1
g6
D4
mm
SND/BND 165R
SND/BND 1610R
SND/BND 205R
SND/BND 255R
SND/BND 2510R
SND/BND 325R
SND/BND 3210R
SND/BND 405R
SND/BND 4010R
SND/BND 5010R
SND/BND 6310R
16
16
20
25
25
32
32
40
40
50
63
Ca
Coa
kN
5
10
5
5
10
5
10
5
10
10
10
15,2
15,2
19,4
24,6
24,6
31,6
32
39,6
39,4
49,7
62,8
12,7
12,6
16,7
21,7
20,5
28,7
27,8
36,7
34
44
57
2000
2000
4700
4700
4700
5700
5700
5700
5700
5700
5700
28
28
36
40
40
50
50
63
63
75
90
38
28
47
51
51
65
65
78
78
93
108
8,1
10,7
11,7
13
25,8
19,1
22,6
25,4
63,6
70,6
78,4
12,4
17,0
18,3
22,7
43,7
40,4
41,8
63,2
127,1
157,6
202,9
1
1
1
1
1
1
1
2
2
2
2
PN - Precision ball screws

preloaded for optimal rigidity. Steel inserts
optional
Designations
A2
d0
D1
D -0,2
-0,5
D +0,2
-0,2
d1
d2
PND - Precision ball screws

Ball recirculation in composite inserts, nut
to DIN standard, preloaded for optimal
rigidity. Steel inserts optional
A2 D
D1
g9
Ca
Coa
JS12 6x
16
20
25
25
32
32
40
40
50
63
Designations
Dimensions
Lead
5
5
5
10
5
10
5
10
10
10
15,2
19,4
24,6
24,6
31,6
32
39,6
39,4
49,7
62,8
12,7
16,7
21,7
20,5
28,7
27,8
36,7
34
44
57
2000
4700
4700
4700
5700
5700
5700
5700
5700
5700
48
52
64
75
74
113
88
128
157
161
10
12
12
10
12
16
14
16
16
20
28
33
38
43
45
54
53
63
72
85
48
57
62
67
70
87
80
95
110
125
38
45
50
55
58
70
68
78
90
105
M5
M6
M6
M6
M6
M8
M6
M8
M10
M10
5,7
8,2
13
14,2
19,1
22,6
25,4
52,5
70,6
78,4
8,3
12,2
22,7
21,8
40,4
41,8
63,2
101,7
157,6
202,9
L1
L tn
(a) M8x1
(6x) D 5
(8x) D 5
IT11
IT11
D1 -0,3
-0,5
d0
d1
d2
L7
L8
2230'
d0
Ph
L
Max
Basic loadRatings Design

dynamic static
D1
g6
D4
D5
h13
D6
h13
L8
Ltn
PND 165R
PND 1610R
PND 205R
PND 255R
PND 2510R
PND 325R
PND 3210R
PND 405R
PND 4010R
PND 5010R
PND 6310R
16
16
20
25
25
32
32
40
40
50
63
Ca
Coa
h13
mm
D1
D6
kN
PN 165R
PN 205R
PN 255R
PN 2510R
PN 325R
PN 3210R
PN 405R
PN 4010R
PN 5010R
PN 6310R
L 10
L 11
D4
d2
D5
(a) M6x1
d1
mm
Ph
Max
A3
Basic load
ratings
dynamic static
Lead
A
A1
Dimensions
kN
5
10
5
5
10
5
10
5
10
10
10
2000
1000
4700
4700
4700
5700
5700
5700
5700
5700
5700
28
28
36
40
40
50
50
63
63
75
90
38
38
47
51
51
65
65
78
78
93
108
5,5
5,5
6,6
6,6
6,6
9
9
9
9
11
11
48
48
58
62
62
80
80
93
93
110
110
40
40
44
48
48
62
62
70
70
85
85
48
87
50
62
75
74
102
88
130
155
157
5,7
10,7
8,2
13
14,2
19,1
22,6
25,4
52,5
70,6
78,4
8,3
17,0
12,2
22,7
21,8
40,4
41,8
63,2
101,7
157,6
202,9
1
1
1
1
1
1
1
2
2
2
2
L8
30
90
30
90
Design 1
Design 2
Legend:
113
3 Driving systems
Ball screws
SL/BL - Long lead ball screws
Designations
Ball recirculation through the face.

SL: axial play
BL: backlash elimination by oversize balls.
Dimensions
Basic load
ratings
dynamic static
Lead
d0 Ph
d1
d2
A2
D1
g9
D1
D -0,2
-0,3
SL/BL 2520R
SL/BL 2525R
SL/BL 3220R
SL/BL 3232R
SL/BL 3240R
SL/BL 4020R
SL/BL 4040R
SL/BL 5050R
25
25
32
32
32
40
40
50
Ca
Coa
JS12 6x
kN
20
25
20
32
40
20
40
50
24,3
24,4
30
31,1
29,6
37,7
38,3
49,1
21,7
21,5
27,5
28,4
26,9
35,2
34,2
43,5
4700
4700
5700
5700
5700
5700
5700
5700
66,4 15
77,9 15
66,4 15
80,3 15
55
15
86,8 15
110,3 25
134 25
48
48
56
56
53*
63
72
85
73
73
80
80
80
95
110
125
60
60
68
68
68
78
90
105
M6
M6
M6
M8
M6
M8
M10
M10
23
22,6
25,7
26
15,7
41,8
53,3
94,8
51,6
51
65,3
68,3
38,6
129,4
133,8
238,2
D5
d2
d1
A2 D
mm
A3
D
D -0,2
-0,3
Max
A
A1
* Tolerance g6
J
D5
SLD/BLD - Long lead ball screws

Ball recirculation through the face, nut to
DIN standard.
SLD: axial play
BLD: backlash elimination by oversize balls
A2
A3
(6x) D 5
J
IT11
90
Design 1
Legend:
114
D1
D -0,2
-0,3
D5
d2
d1
D -0,2
-0,3
L8
2230
Basic load
Design
ratings
dynam. static
Lead
d0
Ph
d1
d2
L
Max
SLD/BLD 3232R 32 32
D
(a) M6x1
Dimensions
mm
A
A1
Designations
A2 D
g6
D1 J
Ca
Coa
JS12 6x
kN
31,1 28,4 5700 80,3 15 50 80 65 M8 26
68,3 1
Notes
115
3 Driving systems
Ball screws
Rotating nut
The nut rotates inside bearings and moves
along the fixed long lead screw shaft.
The drive motor moves with the nut,
so inertia and critical speed problems,
associated with a long rotating shaft, are
minimised (figs.10 and11).
Two versions available:
SLT: rotating nut using ball screw with axial
play
BLT: rotating nut using ball screw with
backlash elimination.
Size
Ball screw capacities

dynamic
static
Bearing axial capacities

dynamic
static
Ca
Coa
Ca
Coa
96,6
80,5
141,2
87,3
81,7
176,7
133,8
238,2
61,8
61,8
78
78
78
93,6
114
156
56
56
76,5
76,5
76,5
91,5
118
166
kN
2520
2525
3220
3232
3240
4020
4040
5050
39,5
33,5
49,8
32,1
30
54,7
53,3
94,8
L8
L7
L9
L2
L1
Rotating nut inertia
L6
L5
H3
R2
L3
L4
L
Z2 x H2
R1
Size
2520
2525
3220
3232
3240
4020
4040
5050
Inertia Pulley support
Mass of rotating nut
kgmm2
kg
1012
1023
1935
1919
1949
3095
3784
11482
4,5
4,6
7,2
7,1
7,1
7,5
8,4
15,5
Max transmissible
torque
Max transmissible
axial load
Nm
kN
180
180
209
209
209
240
246
803
68,3
68,3
107
87,3
81,7
116
93,3
162
Z1 x H1
Rotating nut capacities

J2
J1
Size
2520
2525
3220
3232
3240
4020
4040
5050
116
Fig.10
Fig.11
Designations
L1
R1
R2
j1
J2
Z1H1
Z2H2
H3
useful length
h8
SLT/BLT 2520
SLT/BLT 2525
SLT/BLT 3220
SLT/BLT 3232
SLT/BLT 3240
SLT/BLT 4020
SLT/BLT 4040
SLT/BLT 5050
40
40
50
50
50
58
60
70
g6
72,5
72,5
82
82
82
93
93
120
100
100
119,5
119,5
119,5
125
137
170
133
133
150
650
150
159
168
210
100
100
120
120
120
125
137
170
65
65
76
76
76
80
102
110
48
48
56
50
53
63
72
85
121
126,2
132,4
126,8
125,7
136,4
159,3
163,3
15
15
20
20
20
20
47
20
max
max
0,8
0,8
0,8
0,8
0,8
0,8
1,6
1,6
0,8
0,8
0,8
0,8
0,8
0,8
1,6
1,6
mm
116
116
135
135
135
142
153
190
55
55
68
68
68
75
80
106
69
69
69
69
69
89
89
811
6M620
6M620
6M620
6M620
6M620
6M620
6M620
6M830
M61
M61
M61
M61
M61
M81
M81
M81
All tolerances js13 if not specified
117
3 Driving systems
Ball screws
Shaft end combinations for rolled

ball screws
In the order code, shaft end machining is
defined by:
one letter for < 16 mm
two letters for 16 mm
resulting from the combination of two
machined ends (see designation page 108).
Machined ends are represented in detail

on page 119 for < 16 mm and pages
120121 for 16 mm
< 16 mm
Order code
16 mm
Two machined ends
Order code
Two machined ends
A (without length indication)
cut only
AA (without length indication)
cut only
A (+ length)
cut + annealed
1+2
BA
1A + 2A
F*
2+2
FA*
2A + 2A
G*
2+3
GA*
2A + 3A
2+4
HA
2A + 4A
2+5
JA
2A + 5A
3+5
MA
3A + 5A
S (+ length)
Ends to root diameter,

any possible lengths.
SA (+ length)
Ends to root diameter d2,

End machined to diameter d3

under induction hardening,
UA (+ length)
Keyway
Keyway
To customers drawing
* Attention! This mounting requires the greatest precautions. Please contact us.
Dimensions
d2
UA: end machined to diameter d3 under

induction hardening, any possible lengths.
118
d3
d2
d3
Dimensions
mm
d2
d3
mm
165
12,7
165
12,7
205
16,7
14
205
16,7
14
255
21,7
19
255
21,7
19
2510
20,5
18
2510
20,5
18
2520
21,7
19
2520
21,7
19
2525
21,5
18
2525
21,5
18
325
28,7
26
325
28,7
26
3210 DIN
27,8
25
3210 DIN
27,8
25
3210
26
23
3210
26
23
3220
27,5
24
3220
27,5
24

diameter < 16 mm
Special ends are machined to customer
drawing on request
Type 1
Type 2
d4
d0
Ra
d5
Cx45
baxd7
B1
G1
Type 3
Cx45
ra
baxd7
(B2)
Type 5
mxd6
d4
mxd6
d4
ra
ra
Cx45
B3
B3
Cx45
(B2)
G1
Keyway
e
B5
B5
Cx45
B1
B4
Type 4
d4
b
A
d5
Cx45
B6
aN9
End Length
Dimensions
Size
d5 d4 B1 B2 B3 B4 B5 B6 G
d0
h7 js7 js12
js12 js12 H11 js12 g6
6
8
10
12/12,7
14
3
4
5
6
8
4
5
6
8
10
22
24
26
38
40
10
12
12
12
16
7
7
9
10
12
32
36
38
50
56
5,4
5,6
6,7
7,8
9
17
19
21
22
28
M40,7
M50,8
M61
M81
M101,5
G1
d6
ba
+0,14 h11/h12
0
7
7,2
7,5
2,5
13,3
0,5
0,7
0,8
0,9
1,1
3,8
4,8
5,7
7,6
9,6
0,5
0,5
0,5
0,5
0,5
1,2
1,2
1,5
1,5
2,3
d7
ra
h11
maxi N9
2,9
3,7
4,5
6,5
7,8
0,3
0,3
0,3
0,3
2
2
+0,5
0
8
10
Keyway
DIN 6885
3
3
4,8
6,8
0,1
0,1
A228
A2210
119
3 Driving systems
Ball screws
diameter 16 mm
Standard shaft ends for ball screws,
nominal diameter 16 mm, have been
developed to suit the SKF thrust bearings
FLBU, PLBU and BUF.
These standard ends are the same for all

screw types.
However, for the SL/TL long lead screw,
an additional shoulder, part of the threaded
length, will be machined to protect the
wiper and nut thread during assembly (both
sides) Apart from this, the end itself is the

same for all screw types.
End bearing D Machined end type
FLBU
2A or 3A
PLBU
2A or 3A
BUF
4A or 5A
For SD/BD, SX/BX, SN/BN/PN, SND/BND/PND

Dimensions
Size
d5 d4 d10 d11 d12 B1 B2 B3 B4 B5
d0
h7 h6
h6 h7 js12
js12 js12 H11
B6 B7 B9 d8
js12
g6
G1 m
d6
c1 ba d7
+0,14 h11/
0
h12
ra
h11
Keyway to
DIN 6885 aN9 xi xb
fixed end
(type 2A)
free end
(type 5A)
16
10 /
10 8
53
16 13 69
10
29 2
12,5 M100,75 17 1,1
9,6 0,5 0,5 1,2 8,8
A2212
A2212
20
10 12 /
10 8
58
17 13 75
10
29 2
14,5 M121
18 1,1
9,6 0,5 0,5 1,5 10,5 0,8 A3312

0,41)
A2212
25
15 17 /
17 15 66
30 16 96
13
46 4,5 0
20
M171
22 1,1
16,2 0,5 0,5 1,5 15,5 0,8 A5525

0,41)
A5525
32
17 20 /
17 15 69
30 16 99
13
46 4,5 0
21,7 M201
22 1,1
16,2 0,5 0,5 1,5 18,5 1,2 A5525

0,81)
A5525
40
25 30 /
30 25 76
45 22 121 17,5
67 4,5 0
33,5 M301,5 25 1,6
28,6 1
0,5 2,3 27,8 0,8 A8740

0,41)
A8740
50
30 35 /
30 25 84
55 22 139 17,5
67 4,5 0
35,5 M351,5 27 1,6
28,6 1
0,5 2,3 32,8 1,2 A8745

0,81)
A8740
63
40 50 /
45 40 114 65 28 179 20,75 93 3
1)
54
M501,5 32 1,85 42,5 1,5 1
0,4
2,3 47,8 1,2 A12850 A12850

0,81)
For ends 4A or 5A
For SL/BL only
Dimensions
Size
d5 d4 d10 d11 d12 B1 B2 B3 B4 B5 B6 B7 B9 d8
d0
h7 h6
h6 h7 js12
js12 js12 H11 js12
G
g6
G1 m
d6
+0,14 h11/
0
h12
c1
ba
d7
ra
h11
Keyway to
DIN 6885 aN9 xi xb
fixed end
(type 2A)
free end
(type 5A)
2520 15 17 /
17 15 66 30 16 96
13
46 4,5 0 21,7 M171
22 1,1
16,2 0,5 0,5 1,5 15,5 0,8
A5525
A5525
2525 15 17 /
17 15 66 30 16 96
13
46 4,5 0 21,5 M171
22 1,1
16,2 0,5 0,5 1,5 15,5 0,8

1,2
A5525
A5525
3220 17 20 21,5 17 15 69 30 16 99
13
46 4,5 2 27,4 M201
22 1,1
16,2 0,5 0,5 1,5 18,5 0,81) A5525

1,2
A5525
3232 17 20 21,5 17 15 69 30 16 99
13
46 4,5 2 28,4 M201
22 1,1
16,2 0,5 0,5 1,5 18,5 0,81) A5525

1,2
A5525
3240 17 20 21,5 17 15 69 30 16 99
13
46 4,5 2 26,9 M201
22 1,1
28,6 0,5 0,5 1,5 18,5 0,81) A5525
A5525
4020 25 30 /
30 25 76 45 22 121 17,5 67 6,5 0 35,2 M301,5 25 1,6
28,6 1
0,5 2,3 27,8 0,8
A8740
A8740
4040 25 30 /
30 25 76 45 22 121 17,5 67 6,5 0 35
M401,5 25 1,6
28,6 1
0,5 2,3 27,8 0,8

1,2
A8740
A8740
5050 30 35 37
30 25 84 55 22 139 17,5 67 4,5 3 43,4 M351,5 27 1,6
28,6 1
0,5 2,3 32,8 0,81) A8745
A8740
1)
For ends 4A or 5A
120
Standard machining ends for nominal

diameter 16 mm
Threaded length = total length - end length.
Type 1A
For SL/BL only
Type 2A
For SL/BL only
For SL/BL only

d4
30
C1x45
B7xd8
30
Type 3A
Ra
C1x45
d5
d4
cx45
Baxd7
B7xd8
G1
B1
cx45
30 B xd
7
8
(B2)
ra
C1x45
G1
B1
B4
For other types
For other types
For other types

G
d4
d5
baxd7
B1
G1
d4
C1x45
Ra
C1x45
ra
G1
(B2)
B1
Type 5A
Type 4A
For SL/BL only
Keyway
For SL/BL only
B9xd10
B7xd8
B7xd8
B5
mxd6
B5
mxd6
Cx45
C1x45
B9xd10
B3
Cx45
(B10)
B6
Cx45
For other types
For other types
B7xd8
B5
For other types

B5
mxd6
d11
d12
mxd6
C1x45
ra
B3
Cx45
aN9
ra
Cx45
B3
d11
C7xd8
//
ra
C1x45
d11
C1x45
d11
d12
//
30
30
C1x45
baxd7
B4
For SL/BL only
C1x45
baxd7
Cx45
(B10)
B6
Cx45
End Length
121
3 Driving systems
Ball screws
PLBU
Accessories for screw shaft, plummer
bearing units: End bearings, fixed plummer
housing with angular contact ball bearings
(back-to-back arrangement). Designed for
standard end machining 2A or3A
FLBU
Accessories for screw shaft, flanged bearing
units: End bearings, axially locating flanged
housing with angular contact ball bearings
(back-to-back arrangement). Designed for
standard end machining 2A or 3A
1,6
L4
L2
L3
L1
0,2
15
5 x S1
60
45
122
D1
D3
D5
D2
D4
1,6
Designations
Dimensions
d0
B1
Basic load ratings

dynamic
static
B2
H1
H2
JS7
L1
L4
S1
mm
16
20
25
32
40
50
63
Designations
Dimensions
37
42
46
49
53
59
85
D1
23
25
29
29
32
35
40
58
64
72
77
98
112
130
32
34
39
45
58
65
65
86
94
108
112
126
144
190
68
77
88
92
105
118
160
9
9
11
11
13
13
13
D3
D4
L1
L3
S1
12,8
14,7
31,9
31,9
59,6
79,8
196,1
Ca
Coa
H13
mm
16
20
25
32
40
50
63
12,2
13,3
27,9
24,6
41,9
54,5
128
Basic load ratings

dynamic
static
h7
FLBU 16
FLBU 20
FLBU 25
FLBU 32
FLBU 40
FLBU 50
FLBU 63
Coa
kN
PLBU 16
PLBU 20
PLBU 25
PLBU 32
PLBU 40
PLBU 50
PLBU 63
d0
Ca
H12
kN
76
76
90
90
120
130
165
47
47
60
60
80
90
124
63
63
76
74
100
110
146
37
42
46
49
53
59
85
22
25
32
32
32
32
43,5
6,6
6,6
6,6
9
11
13
13
12,2
13,3
27,9
24,6
41,9
54,5
128
12,8
14,7
31,9
31,9
59,6
79,8
196,1
BUF - Plummer bearings

End bearings, axially free plummer housing
with deep-groove ball bearing. Designed for
standard end machining 4A or 5A
Designations
Dimensions
d0
B1
Basic load ratings

dynamic
static
H1
H2
JS7
L1
L4
S1
mm
L3
H4
45
H5
H3
H2
H1
S1
L2
Ca
Coa
H12
kN
BUF 16
BUF 20
BUF 25
BUF 32
BUF 40
BUF 50
BUF 63
16
20
25
32
40
50
63
Designations
Dimensions
24
26
28
34
38
39
38
58
64
72
77
98
112
130
32
34
39
45
58
65
65
86
94
108
112
126
144
190
68
77
88
92
105
118
160
9
9
11
11
13
13
13
5,07
5,07
9,56
9,56
19,5
19,5
33,2
2,36
2,36
4,75
4,75
11,2
11,2
21,6
B1
L4
L1
FBS - Q
Accessories for ground shaft, flanged
bearing units: End bearings, axially locating
flanged housing with high precision
angular contact ball bearings (back-to-back
arrangement, 4 matched in set)
A
A1
A
D1
A2
A2
A3
D1
D2
mm
Ca
Coa
kN
FBS 204/QXXX
FBS 25/QXXX
FBS 30/QXXX
FBS 35/QXXX
FBS 40/QXXX
FBS 45/QXXX
FBS 50/QXXX
20
25
30
35
40
45
50
Designations
Dimensions
77
82
82
82
106
106
106
32
32
32
32
43,5
43,5
43,5
13
15
15
15
17
17
17
64
88
88
98
128
128
128
60
80
80
90
124
124
124
90
120
120
130
165
165
165
76
102
102
113
146
146
146
34,5
53
45,5
57
100
129
129
71
116
108
143
245
320
320
da D3 D2 J H
Da
FBS - D
Accessories for ground shaft, flanged
bearing units: End bearings, axially locating
flanged housing with high precision
angular contact ball bearings (back-to-back
arrangement, 2 matched in set)
A
A1
A3
D1
d0
Basic load ratings

dynamic
static
Da
A2
da D3 D2 J
d0
Basic load ratings

dynamic
static
A2
A3
D1
D2
mm
FBS 204/DXXX
FBS 25/DXXX
FBS 30/DXXX
FBS 35/DXXX
FBS 40/DXXX
FBS 45/DXXX
FBS 50/DXXX
20
25
30
35
40
45
50
Ca
Coa
kN
47
52
52
52
66
66
66
32
32
32
32
43,5
43,5
43,5
13
15
15
15
17
17
17
64
88
88
98
128
128
128
60
80
80
90
124
124
124
90
120
120
130
165
165
165
76
102
102
113
146
146
146
21,2
32,5
28,1
35,1
61,8
79,3
79,3
35,5
58,5
54
71
122
160
160
123
3 Driving systems
Ball screws
Fig.12
Ground ball screws
Fig.13
SKF offers a wide range of ground ball

screws (figs.12 and13) to cover all
requirements
Flanged nut with internal preload, DIN
standard
Double preloaded flanged nut, DIN
standard
Double cylindrical preloaded nut
Single nut with axial play DIN standard
Single nut preloaded end flange
Double nut preloaded end flange
Double nut preloaded center flange
Single nut preloaded cam shaped
Service range (Europe only)

General rules
Delivery time
one / two weeks without machined ends

three week with ends machined to customer drawings.
Quantity
Max. 3 pieces for standard PGFJ, PGFE, SGFE, DIN standard.
Precision classes
G3 - G5 - G7
Materials
Standard steel only for the shafts

C53 for the screws
18NiCrMo5 for the nuts (refer to our catalogue 4621).
Capabilities
Screw shafts, right hand, single start, as per customer drawing (splines and hollow shafts excepted).
Neither stainless steel nor special treatments are accepted through this quick channel.
Maximum length : 1800 mm except for 255 which is limited to 1000mm
Sizes
255
325
405
4010
505
5010
5020 (except for PGFJ)
6310
Standard range (all countries)

Diameters
Leads
Nut types
Precision classes
From 12,7 to 152 mm
From 2,5 to 40 mm
Cylindrical or flanged nuts with preload or axial play
G1 - G3 - G5
From 0,5 to 6 inches
From 0,1 to 1,6 inches
Cylindrical or flanged nuts with preload or axial play
G1 - G3 - G5
Ground ball screws
N.B.:
as PDF files.
124
SKF ground ball screws

North American range
Publication nr. 985-601
Ordering key
Nut type:
Nut with internal preload, DIN standard
Double preloaded flanged nut, DIN
Nut with axial play, DIN
Double nut preloaded end flange
WPR
PGFJ
PGFE
SGFE
PGFM

Hand:
Right
Left (on request)
R
L
Number of circuits of balls

Threaded length / Total length (mm); (in) for PGFM
Lead precision:

G5, G3, G1
Nut orientation:
Threaded side or flange of nut towards shorter (S) or longer (L) machined end of shaft
In case of same end machining ()
Machined end combination to customers drawing
Wipers:
Always with wipers
Example:
PGFE
325
330 / 445
G1
L - HA
+K
WPR
125
3 Driving systems
Ball screws
PGFE - Ground ball screws
Designations
Double flanged nut, preloaded,

DINstandard
Dimensions
No. of
circuits
of balls
Lead
==
d0
Ph
D1
A2
L8
Basic load
ratings
Design
dynamic static
Ca
Coa
(a) M6 x 1
A3
L8
L8
(a) M6 x 1
2230
A
8 x D2
mm
D h6
d0
A2
D-0,2
-0,3
D1
J
d2max
h6
30
6 x D2
PGFE 165 R
PGFE 205 R
PGFE 255 R
PGFE 2510 R
PGFE 325 R
PGFE 3210 R
PGFE 405 R
PGFE 4010 R
PGFE 5010 R
PGFE 6310 R
16
20
25
25
32
32
40
40
50
63
Designations
Dimensions
5
5
5
10
5
10
5
10
10
10
28
36
40
40
50
50
63
63
75
90
48
58
62
62
80
80
93
93
110
125
38
47
51
51
65
65
78
78
93
108
79
79
88
123
89
146
100
146
168
170
12
12
14
15
15
18
16
18
20
22
40
44
48
48
62
62
70
70
85
95
No.
kN
3
3
3
3
4
3
4
3
4
4
9,7
13,4
15,6
20,2
17,3
42,2
24,6
46,5
68
77,5
No. of
circuits
of balls
Basic load
ratings
14,2
24,5
33,6
39,5
42,8
80
73
98
170
227
1
1
1
1
1
1
2
2
2
2
30
90
90
Design 1
Design 2
Legend:
SGFE - Ground ball screws

Single Flanged nut, axial play,
DIN standard
Lead
==
d0
Ph
D1
A2
L8
Design
dynamic static
Ca
Coa
A3
AS
A
(a) M6 x 1
L8
230
8 x D2
(a) M6 x 1
L8
30
6 x D2
mm
D h6
d0
A2
D-0,2
-0,3
J
d2max
D1
h6
SGFE 165 R
SGFE 205 R
SGFE 255 R
SGFE 2510 R
SGFE 325 R
SGFE 3210 R
SGFE 405 R
SGFE 4010 R
SGFE 5010 R
SGFE 6310 R
16
20
25
25
32
32
40
40
50
63
5
5
5
10
5
10
5
10
10
10
28
36
40
40
50
50
63
63
75
90
48
58
62
62
80
80
93
93
110
125
38
47
51
51
65
65
78
78
93
108
45,5
45,5
51
69
52
82
58
82
94
96
12
12
14
15
15
18
16
18
20
22
40
44
48
48
62
62
70
70
85
95
No.
kN
3
3
3
3
4
3
4
3
4
4
9,7
13,4
15,6
20,2
17,3
42,2
24,6
46,5
68
77,5
14,2
24,5
33,6
39,5
42,8
80
73
98
170
227
30
90
90
Design 1
Design 2
Legend:
N.B.:
Thrust bearing units for ground ball
screw, see page 123.
126
1
1
1
1
1
1
2
2
2
2
PGFJ - Ground ball screws
Designations
Flanged nut, with internal preload,

DINstandard
Dimensions
No. of
circuits
of balls
Lead
==
d0
Ph
D1
A2
L8
Basic load
ratings
Design
dynamic static
Ca
Coa
A2
D-0,2
-0,3
A3
A
(a) M6 x 1
L8
L8
(a) M6 x 1
30
6 x D2
2230
8 x D2
mm
D h6
d0
J
d2max
D1
h6
PGFJ 165 R
PGFJ 205 R
PGFJ 255 R
PGFJ 2510 R
PGFJ 325 R
PGFJ 3210 R
PGFJ 405 R
PGFJ 4010 R
PGFJ 5010 R
PGFJ 6310 R
16
20
25
25
32
32
40
40
50
63
5
5
5
10
5
10
5
10
10
10
28
36
40
40
50
50
63
63
75
90
48
58
62
62
80
80
93
93
110
125
38
47
51
51
65
65
78
78
93
108
63
65
68
104
81
117
82
142
144
147
12
12
14
15
15
18
16
18
20
22
40
44
48
48
62
62
70
70
85
95
No.
kN
3
3
3
3
4
3
4
3
4
4
9,7
13,4
15,6
20,2
22,1
42,2
24,6
59,6
68
30
14,2
24,5
33,6
39,5
57
80
73
130
170
120
1
1
1
1
1
1
2
2
2
2
30
90
Design 1
Legend:
90
Design 2
N.B.:
Thrust bearing units for ground ball
screw, see page 123.
127
3 Driving systems
Ball screws
Precision ground screw (fig.14)
Fig.14
Screw diameter from 0,5 to 6 inches. Lead

from 0,1 to 1 inch. Any lead metric/inch
possible. Flange position and holes pattern
can be adjusted upon request. Screw
bearing support units FLRBU, FLBU, PLBU
or BUF.
PGFM double nut preloaded end flange
PGF single nut preloaded end flange
Designations
Screw
diameter
Lead
Locating
diameter
Flange
diameter
Bolt
circle
Double nut Flange

length
thickness
Single nut Basic load ratings

length
dynamic
static
d0
Ph
D1
A5
A2
in
Ca
Coa
lbf
PGFM 0,50,1
PGFM 0,50,2
0,5
0,5
0,1
0,2
1
1,25
1,875
2,1255
1,437
1,687
2,25
3,625
0,437
0,437
1,35
2,225
1204
137
2270
3302
PGFM 0,6250,1
PGFM 0,6250,2
PGFM 0,6250,25
0,625
0,625
0,625
0,1
0,2
0,25
1,125
1,375
1,625
2
2,25
2,5
1,562
1,812
2,062
2,25
3,5
3,937
0,437
0,437
0,437
1,35
1,9
2,187
1327
1213
1124
2867
5205
6220
PGFM 0,750,1
PGFM 0,750,2
PGFM 0,750,25
0,75
0,75
0,75
0,1
0,2
0,25
1,25
1,562
1,625
2,25
2,562
2,625
1,75
2,062
2,125
2,25
3,5
3,937
0,437
0,437
0,437
1,35
1,9
2,187
1457
1573
1804
3559
6416
876
PGFM 0,8750,2
PGFM 0,8750,25
0,875
0,875
0,2
0,25
1,687
1,75
2,687
2,75
2,187
2,25
3,5
3,937
0,437
0,437
1,9
2,187
16
1163
89
9357
PGFM 1,00,1
PGFM 1,00,2
PGFM 1,00,25
1
1
1
0,1
0,2
0,25
1,625
1,812
2,125
2,625
2,812
3,125
2,125
2,312
2,625
2,312
3,562
4,312
0,5
0,5
0,5
1,412
1,962
2,312
1626
1262
1908
4752
9223
12572
PGFM 1,250,2
PGFM 1,250,25
PGFM 1,250,5
1,25
1,25
1,25
0,2
0,25
0,5
2,062
2,125
2,5
3,062
3,125
3,5
2,562
2,625
3
3,562
4
7,125
0,5
0,5
0,5
1,962
2,25
3,812
1698
1848
1147
11648
14366
20759
PGFM 1,50,2
PGFM 1,50,25
PGFM 1,50,5
1,5
1,5
1,5
0,2
0,25
0,5
2,312
3,562
3,25
3,312
3,562
4,5
2,812
3,062
3,875
3,687
4,437
7,375
0,625
0,625
0,625
2,087
2,437
3,875
166
1802
163
1472
20656
3624
PGFM 1,750,2
PGFM 1,750,25
PGFM 1,750,5
PGFM 1,750,75
1,75
1,75
1,75
1,75
0,2
0,25
0,5
0,75
2,625
2,875
3,5
3,5
3,875
4,125
4,75
4,75
3,25
3,5
4,125
4,125
3,812
4,562
7,5
10,125
0,75
0,75
0,75
0,875
2,212
2,5
4
4,875
1474
1418
1276
1129
16887
24274
43286
4365
PGFM 2,00,2
PGFM 2,00,25
PGFM 2,00,5
PGFM 2,00,75
PGFM 2,01,0
PGFM 2,00,25
2
2
2
2
2
2,25
0,2
0,25
0,5
0,75
1,75
0,25
2,937
3,125
3,75
3,75
3,75
3,312
4,187
4,375
5,5
5,5
5,5
5
3,562
3,75
4,625
4,625
4,625
4,187
3,182
4,562
7,5
10,125
11
4,562
0,75
0,75
0,75
0,875
1,25
0,75
2,212
2,562
3,812
4,875
6
2,562
1757
1964
1180
24057
18375
10456
19310
27890
50548
50350
36723
31504
128
A
A5
A2
(a)
A3
30
d0
d2
D1
(b)
+.000
D -.001
(D-.01)
.005
(d)
(c)
Designations
Legend:
(a) = 1/8-27 NPT (lube access)
(b) = wipers
(c) = optional
(d) = (Nh) D5 Dia. Thru
Screw
diameter
Lead
Locating
diameter
Flange
diameter
Bolt
circle
Double nut Flange

length
thickness
Single nut Basic load ratings

length
dynamic
static
d0
Ph
D1
A5
A2
in
Ca
Coa
lbf
PGFM 2,250,5
PGFM 2,250,75
PGFM 2,251,0
2,25
2,25
2,25
0,5
0,75
1
4,125
4,125
4,125
5,875
5,875
5,875
5
5
5
7,5
10,125
13
0,75
0,875
1,25
4
4,875
7
25853
25749
26599
57810
57631
60759
PGFM 2,50,25
PGFM 2,50,5
PGFM 2,50,75
PGFM 2,51,0
2,5
2,5
2,5
2,5
0,25
0,5
0,75
1
3,625
4,375
4,375
5,25
5,375
6,375
6,375
7,25
4,5
5,375
5,375
6,25
4,562
7,5
10,125
14,5
0,75
0,75
0,875
1,25
2,562
4
4,875
7
11089
27349
28208
38815
35996
65072
68325
83037
PGFM 3,00,25
PGFM 3,00,5
PGFM 3,00,75
PGFM 3,01,0
3
3
3
3
0,25
0,5
0,75
1
4,125
4,812
5,75
5,75
6,15
6,812
7,75
7,75
5,125
5,812
6,75
6,75
4,687
7,625
11,375
14,5
0,875
0,875
0,875
1,25
2,687
4,125
6,125
7,5
11880
30815
43353
43216
43226
83057
102706
102455
PGFM 3,50,5
PGFM 3,50,75
PGFM 3,51,0
3,5
3,5
3,5
0,5
0,75
1
5,375
5,875
6,5
7,375
7,875
8,5
6,375
6,875
7,5
7,75
11,5
14,75
1
1
1,25
4,25
6,25
7,75
32975
48593
62805
97605
128184
150171
PGFM 4,00,5
PGFM 4,00,75
PGFM 4,01,0
4
4
4
0,5
0,75
1
5,875
6,75
7
7,875
8,75
9
6,875
7,75
8
8
11,75
14,75
1,25
1,25
1,25
4,5
6,5
7,75
34886
51693
69004
112145
147601
180105
PGFM 5,00,5
PGFM 5,00,75
PGFM 5,01,0
5
5
5
0,5
0,75
1
6,75
7,75
8
8,75
9,75
10
7,75
8,75
9
8
11,75
14,75
1,25
1,25
1,25
4,5
6,875
7,75
38194
56974
77221
141214
186401
230571
PGFM 6,00,5
PGFM 6,00,75
PGFM 6,01,0
6
6
6
0,5
0,75
1
7,75
8,75
9
9,75
10,75
11
8,75
9,75
10
8
11,75
14,75
1,25
1,25
1,25
4,5
6,5
7,75
41600
61435
84043
173819
225174
281022
129
3 Driving systems
Ball screws
Applications


Machine tool
Textile machine
a) Ground ball screws
a) Precision ball screws
Electroerosion
Pick and place robot for laboratory
b) Profile rail guides
130
Roller screws
There are two non-competing designs
to cover requirements beyond ball screw
limitations. Load transfer from the nut
tothe screw shaft through a number of
threaded or grooved rollers: the resulting
large number of contact points ensures
a much higher load carrying capacity and
amuch longer life than ball screws of
similar size.
SR Planetary roller screws
SV Recirculating roller screws
(fig.15)
Non-recirculating rollers yield high speed
and acceleration capabilities, exceptional
reliability and resistance to adverse
environments.
(fig.16)
Very fine lead of thread (1 mm) allows
high positioning accuracy, repeatability and
exceptional rigidity.
3
Fig.15
SR planetary roller screw
Ten reasons for using roller screws

High load ratings (SR-SV)
Very high rotational speed (SR)
High acceleration and deceleration rates
(SR)
Long life at high cycle rates (SR)
High reliability (SR-SV)
Resistance to hostile surroundings (SR)
Ability to accommodate shock loads (SR)
Small displacements with very good
repeatability (SV)
Nut rotation when speed becomes critical
(SR)
Frequent removal of the nut from the
screw shaft (SR, most SV)
Fig.16
SV recirculating roller screw

Type
Features
SR
SV
Higher static load up to 12000 kN
SR
SV
Higher dynamic load up to 2235 kN
SR
Higher rotational speed - 48 at over 3000 rpm
SR
Higher acceleration over 12000 rad/sec2
SR
Shock loads
SR
Adverse environments (dust, ice, sand)
SV
1 mm lead
SR
SV
Stainless steel
Roller screws
N.B.:
as PDF files.
131
3 Driving systems
Roller screws
Planetary roller screws
Fig.17
(fig.17)
Features
Many strong contact surfaces
Non-recirculating rollers
No weak point in the nut
Benefits
Long life: high load carrying capacity
Robust and shock resistant
Exceptional reliability
High speed & acceleration capabilities
Threaded rollers are the basis of SR/BR/TR/

PR planetary roller screws (fig.18).
Fig.18
Typical applications
The capacity to carry heavy loads for
thousands of hours in the most arduous
conditions makes planetary roller
screws suitable for the most demanding
applications. The robust nut can withstand
shock loads and the timing mechanism
ensures reliability even in harsh environments
and at high accelerations; the long lead and
the symmetrical design of the nut permit
high linear speeds.
132
Examples:
Machine tools
Injection moulding
Factory automation process including spot
welding, broaching, clamping, presses,
guns, etc...
Test benches
Steel industry
Tyre industry
Automatic handling
Military aircraft, tanks, rocket launchers,
radar, ships and submarines
Nuclear industry
Transportation industry
Fig.19
(fig.19)
Features
Many strong contact points
Very small leads (1 mm)
No miniature parts
Benefits
Long life: high load carrying capacity
High positioning accuracy: fine resolution
Exceptional reliability
Grooved rollers are the basis of SV/PV

recirculating roller screws (fig.20).
Fig.20
Typical applications
Ultimate positioning accuracy can be
obtained using the fine lead of SV/BV/PV
recirculating roller screws.
Their great mechanical advantage
minimised input torque and increases
resolution. They can simplify a complete
transmission and improve its rigidity. They
are often used in applications of advancing
technology where reliable optimum
performance is vital.
Examples:
Grinding machines
Laboratory equipment
Hospital equipment
Paper-making
Printing industry
Telescopes
Satellites
133
3 Driving systems
Roller screws
Complete assemblies (fig.21)

Selected roller screws, both planetary and
recirculating, are available within reduced
delivery times, with customised screw
shafts from premachined stocked units: see
pages 138-139 for planetary and 150-161
forrecirculating roller screws.
Fig.21
Maximum speed
For screw assembly BRC+FLRBU or
BVC+FLRBU, the maximum speed
isdefined by the product nd0.
nd0 <160000 for BRC
<20000 for BVC >25
<30000 for BVC 25
(n = rotational speed
d0 = outside diameter of screw shaft)
Service range
General rules
Delivery time
Delivery time from a couple of days to max. two weeks is possible fororders meeting the following conditions:
Quantity
Max. 3 pieces for planetary and recirculating roller screw.
Materials
Both shafts and nuts should be made of standard steel (refer to our catalogue 4351). Neither stainless steel nor special
treatments are accepted through this quick channel.
Capabilities
Standard nuts (no special documents such as conformity report), with axial play, backlash elimination or preload.
Screw dimensions: see limitations on page 138-139.
Standard machining: no spline, no hollow shaft, no radius in grinding operations. If any such requirements, order cannot be
accepted by the Service Channel. Unless specified, tolerances will be according to class 5, ISO 3408-3 (see catalogue 4351 page 24).
FLRBU thrust bearing units can be delivered for all sizes.
Lead precision: G5 to ISO standard.
Lubrication: screw assemblies delivered with machined ends are greased with SKF LGEP2 (temperature range:
20 C to +120 C); without end machining, they are only protected with rust inhibitor.
IMPORTANT
134
Screws for nuclear, aerospace, military or medical applications are excluded.
Planetary roller screws with bearing units

Delivery time
Delivery time
1 week
Without end machining
4 weeks
2 weeks
With machined ends
Nuts
With machined ends to customer drawing
With axial play: SRC-SRF
With backlash elimination by oversize rollers: BRC
With backlash elimination: TRU-TRK
Lead
Nuts
Preloaded: PRU-PRK for optimum rigidity
15
21
30
39
Lead
Nominal diameter
Capabilities
Machined ends:
premachined shafts for machining by the customer

to customer drawing (see general rules)
suitable for FLRBU units.
Screw dimensions: see page 138-139
10
15
21
25
30
39
48
Nominal diameter
Capabilities
Machined ends:
Screw dimensions: up to 1500 mm max. length

up to 900 mm threaded length.
Recirculating roller screws with bearing units

Delivery time
Delivery time
1 week
Without end machining
4 weeks
2 weeks
With machined ends
Nuts
With machined ends to customer drawing
Preloaded: PVU-PVK for optimum rigidity
20
25
32
Nominal diameter
Capabilities
Machined ends:
premachined shafts for machining by the customer

suitable for FLRBU units.
Screw dimensions: see page 150-151
Lead
With axial play: SVC
With backlash elimination by oversize rollers: BVC

Lead
Nuts
16
20
25
32
40
Nominal diameter
Capabilities
Machined ends:
Screw dimensions: up to 1500 mm max. length

up to 900 mm threaded length.
135
Notes
136
Ordering key
Play or preload:
Axial play (standard range)
Preload by rollers to eliminate backlash
Nut preloaded for backlash elimination
Nut preloaded for optimum rigidity
S
B
T
P
Product:
Planetary roller screw
Recirculating roller screw
R
V
Nut type:
Cylindrical nut with axial play
Nut with central flange and axial play
Preloaded cylindrical nut
Preloaded nut with central flange
C
F
U
K

Hand:
Right
Left (on request)
R
L
Threaded length, total length (mm)

Lead precision:

G1 - G3 - G5
Nut orientation:
(this only applies to flanged nuts SRF, TRK, PRK, PVK)
For cylindrical nut
Shorter machined end, g6 side of nut towards
Longer machined end, g6 side of nut towards
S
L
Shaft ends:
Wipers:
Wipers in the nut: mounted for SR, delivered separately for SVC
Without wipers
Nut without wiper recesses (non standard SR only)
WPR
NOWPR
X
Example 1:
39 20
425 / 590
G1
Example 2:
39 20
425 / 590
G5
WPR
NOWPR
137
3 Driving systems
Roller screws
Planetary roller screws

BRC - Range
(a)
"
(d)
1,6
D g6
d8
0,8
"
B
0,8
d1
d10
1 x 45
(b)
(b)
w x 45
12
B5
B6
"
0,8
(c)
w x 45
"
1 x 45
0,8
A h12
Legend:
(a) = key
(b) = wiper
(c) = lubrication Q
(d) = thrust bearing FLRBU*
Screw ends can be machined to customer requirements
Maximum threaded length: can be cut and machined to customer requirements
Planetary roller screws without end

machining, lead precision G5 according to
ISO standard.
Nut preloaded by rollers for backlash
elimination.
* Preload torque measured at 50 rpm with SKF LGEP2

as lubricant
138
Designations
Dimensions
d0
B6
Basic load ratings

dynamic
static
d10
B5
mm
Ca
Coa
kN
BRC 155-R5
15
400
25
115
35
50
25,9
43,5
BRC 215-R5
21
570
40
178
45
64
50,5
81,9
BRC 305-R5
30
800
50
213
64
85
91,9
178,3
BRC 395-R5
39
1046 70
259
80
100
129,2
268,9
N.B.:
Nut and thrust bearing unit cannot be
modified. The standard version has the
flange of the thrust bearing is located on
the KMT side.
FLRBU / BRC- Range

Planetary roller screw with thrust bearing
unit
(a)
Legend:
(a) = Thrust bearing FLRBU*
(a)
B7
B7
B8
B8
1,6
1,6
D4 D2 D5
D4 D2 D5
D3 D1
D3 D1
45
45
1,6
1,6
L4
L2
L4
L5 L2
L1
Designations
60
0,2
L
L 5
5xS1
0,2
L3
15
15
5xS1
60
x4
x4
L1
Dimensions
d0
B7
Basic load ratings

dynamic
static
B8
L1
L2
L3
D1
D3
D4
mm
Ca
Coa
kN
FLRBU2/BRC 155-R5
15
285 398
46
10
32
90
60
76
32
27,9
31,9
FLRBU4/BRC 215-R5
21
392 568
77
13
60
90
60
74
32
40,1
63,8
FLRBU5/BRC 305-R5
30
587 798
89
16
68
120 80
100 44
74,2
119,2
FLRBU6/BRC 395-R5
39
787 1044 110 20
82
140 100 120 54
109,4
188,4

as lubricant
139
3 Driving systems
Roller screws
SRC - Range
Cylindrical nut with axial play
A
0,8
"
"
(a)
0,8
a
(b)
0,8
15
d1 d0
d2
D3
w x 45
"
Designations
D2
w x 45
Legend:
(a) = wiper recess
(b) = wiper on request
"
Dimensions
Lead
d0
Ph
Basic load ratings

dynamic
static
ltp
sap
d1
d2
g6/H7
h12
h9
mm
Ca
Coa
kN
SRC 84
500
0,02
8,4
7,3
25
44
12
26,5
11,24
19,59
SRC 125
12
750
0,02
12,4
11,3
30
44
12
31,5
17,73
26,71
SRC 155
SRC 158
15
15
5
8
975
975
0,02
0,02
15,4
15,5
14,3
14
35
35
50
50
4
4
16
16
36,5
36,5
5
5
25,95
27,43
43,59
40,78
SRC 206
20
1300
0,02
20,4
19,3
40
50
16
41,5
26,83
44,86
SRC 215
SRC 216
SRC 218
SRC 2110
21
21
21
21
5
6
8
10
1400
1400
1400
1400
0,02
0,02
0,02
0,04
21,4
21,4
21,5
21,8
20,3
20,3
20
19,7
45
45
45
45
64
64
64
64
5
5
5
5
20
20
20
20
47
47
47
47
5
5
5
5
50,55
52,77
54,44
59,24
81,97
82,18
78,06
83,01
SRC 246
SRC 2412
24
24
6
12
1600
1600
0,02
0,04
24,4
24,8
23,3
22,7
48
48
58
58
5
5
20
20
50
50
5
5
42,3
47,65
65,17
62,34
SRC 255
SRC 2510
SRC 2515
25
25
25
5
10
15
1650
1650
1650
0,02
0,04
0,07
25,4
25,8
26,2
24,3
23,7
23,1
53
53
53
78
78
78
6
6
6
25
25
25
55,5
55,5
55,5
5
5
5
63,25
72,63
79,17
108,23
105,31
106,39
SRC 305
SRC 306
SRC 3010
SRC 3020
30
30
30
30
5
6
10
20
2000
2000
2000
2000
0,02
0,02
0,04
0,07
30,4
30,4
30,8
31,5
29,3
29,3
28,7
27,5
64
64
64
64
85
85
85
85
6
6
6
6
32
32
32
32
66,5
66,5
66,5
66,5
5
5
5
5
91,98
95
106,32
123,28
178,32
175,34
174,36
177,28
SRC 366
SRC 369
SRC 3612
SRC 3618
SRC 3624
36
36
36
36
36
6
9
12
18
24
2400
2400
2400
2400
2400
0,02
0,02
0,04
0,07
0,07
36,4
36,5
36,8
37,2
37,5
35,3
35,1
34,7
34,1
33,5
68
68
68
68
68
80
80
80
80
80
5
5
5
5
5
25
25
25
25
25
70
70
70
70
70
5
5
5
5
5
90,45
97,52
106,6
114,14
123,6
179,39
174,05
181,1
176,57
184,38
SRC 395
SRC 3910
SRC 3915
SRC 3920
SRC 3925
39
39
39
39
39
5
10
15
20
25
2650
2650
2650
2650
2650
0,02
0,04
0,07
0,07
0,07
39,4
39,8
40,2
40,5
40,9
38,3
37,7
37,1
36,5
35,9
80
80
80
80
80
100
100
100
100
100
8
8
8
8
8
40
40
40
40
40
83
83
83
83
83
7
7
7
7
7
129,21
152,62
167,64
172,82
174,79
268,92
270,93
272,89
260,89
249
SRC 448
SRC 4412
SRC 4418
SRC 4424
SRC 4430
44
44
44
44
44
8
12
18
24
30
3000
3000
3000
3000
3000
0,04
0,04
0,07
0,07
0,07
44,4
44,8
45,2
45,5
45,9
43,2
42,7
42,1
41,5
40,9
80
80
80
80
80
90
90
90
90
90
6
6
6
6
6
32
32
32
32
32
82,5
82,5
82,5
82,5
82,5
7
7
7
7
7
130,48
143,71
157,74
167,81
165,86
261,47
262,87
264,94
266,95
246,44
Continued
140
SRC - Range
(Continued)
A
0,8
"
"
(a)
0,8
a
(b)
0,8
15
d1 d0
d2
D3
w x 45
"
Designations
D2
w x 45
Legend:
(a) = wiper recess
"
Dimensions
Lead
d0
Ph
Basic load ratings

dynamic
static
ltp
sap
d1
d2
g6/H7
h12
h9
mm
Ca
Coa
kN
SRC 485
SRC 488
SRC 4810
SRC 4815
SRC 4820
SRC 4825
48
48
48
48
48
48
5
8
10
15
20
25
3300
3300
3300
3300
3300
3300
0,02
0,04
0,04
0,07
0,07
0,07
48,4
48,6
48,8
49,2
49,5
49,9
47,3
47,1
46,7
46,1
45,5
44,9
100
100
100
100
100
100
127
127
127
127
127
127
8
8
8
8
8
8
45
45
45
45
45
45
103
103
103
103
103
103
7
7
7
7
7
7
198,08
218,43
231,54
257,75
265,69
285,86
481,53
470,61
475,11
486,36
462,27
491,04
SRC 5612
SRC 5624
SRC 5636
56
56
56
12
24
36
4000
4000
4000
0,04
0,07
0,07
56,8
57,5
58,3
54,7
53,5
52,3
100
100
100
112
112
112
8
8
8
40
40
40
103
103
103
7
7
7
212,17
242,22
258,33
433,12
419,15
424,24
SRC 6010
SRC 6015
SRC 6020
60
60
60
10
15
20
4250
4250
4250
0,04
0,07
0,07
60,8
61,2
61,5
58,7
58,1
57,5
122
122
122
152
152
152
10
10
10
45
45
45
125
125
125
10,5
10,5
10,5
338,57
373,06
394,97
779,69
782,69
785,66
SRC 6412
SRC 6418
SRC 6424
SRC 6430
SRC 6436
64
64
64
64
64
12
18
24
30
36
4600
4600
4600
4600
4600
0,04
0,07
0,07
0,07
0,07
64,8
65,2
65,5
65,9
66,3
62,7
62,1
61,5
60,9
60,3
115
115
115
115
115
129
129
129
129
129
8
8
8
8
8
45
45
45
45
45
118
118
118
118
118
7
7
7
7
7
296,38
316,72
328,93
318,15
309,12
763,3
725,56
689,62
619,84
589,38
SRC 7510
SRC 7515
SRC 7520
75
75
75
10
15
20
5500
5500
5500
0,04
0,07
0,07
75,8
76,2
76,5
73,7
73,1
72,5
150
150
150
191
191
191
10
10
10
63
63
63
153
153
153
10,5
10,5
10,5
504,86
561,29
572,26
1486,68
1491,3
1495,87
SRC 8012
SRC 8018
SRC 8024
SRC 8036
SRC 8042
80
80
80
80
80
12
18
24
36
42
6000
6000
6000
6000
6000
0,04
0,07
0,07
0,07
0,07
80,8
81,2
81,5
82,3
82,7
78,7
78,1
77,5
76,3
75,7
140
140
140
140
140
156
156
156
156
156
10
10
10
10
10
63
63
63
63
63
143
143
143
143
143
10,5
10,5
10,5
10,5
10,5
410,27
455,94
485,8
442,89
425,64
1163,16
1167,63
1172,06
999,09
932,95
SRC 9920
99
20
7500
0,07
100,5
96,5
200
260
16
100
204
15
924,86
3090,44
SRC 10024
100
24
8000
0,07
101,5
97,5
180
195
10
63
183
10,5
655,81
1825,82
SRC 12024
SRC 12025
120
120
24
25
8000
8000
0,07
0,07
121,5
121,9
117,5
116,9
220
240
240
280
16
16
100
100
224
244
15
15
915,02
1127,43
3027,05
4037,97
SRC 15036
SRC 15025
150
150
36
25
8000
8000
0,07
0,07
152,3
151,9
146,3
146,9
280
320
305
400
16
32
100
160
284
327
15
15
1156,92
1596,53
4108,09
6816,05
SRC 18030
180
30
8000
0,07
182,3
176,3
420
515
32
160
427
20
1962,34
9069,02
SRC 21030
210
30
8000
0,07
212,3
206,3
480
550
40
200
489
20
2295,6
11375,3
141
3 Driving systems
Roller screws
SRF - Range
Flanged nut with axial play
A
u
A2
A1
(b)
0,8
(a)
d1 d0
d2
0,8
+0,5
0
D3
D2
g6/H7
D1
Legend:
(a) = wiper recess
Designations
Dimensions
Lead
d0
Ph
Basic load ratings

dynamic
static
ltp
sap
d1
d2
D1
h12
mm
SRF 84
500
SRF 125
12
SRF 155
SRF 158
15
15
5
8
SRF 206
20
SRF 215
SRF 216
SRF 218
SRF 2110
0,02
8,4
7,3
25
750
0,02
12,4
11,3
30
44
51
975
975
0,02
0,02
15,4
15,5
14,3
14
35
35
50
50
58
58
1300
0,02
20,4
19,3
40
50
63
21
21
21
21
5
6
8
10
1400
1400
1400
1400
0,02
0,02
0,02
0,04
21,4
21,4
21,5
21,8
20,3
20,3
20
19,7
45
45
45
45
64
64
64
64
SRF 246
SRF 2412
24
24
6
12
1600
1600
0,02
0,04
24,4
24,8
23,3
22,7
48
48
SRF 255
SRF 2510
SRF 2515
25
25
25
5
10
15
1650
1650
1650
0,02
0,04
0,07
25,4
25,8
26,2
24,3
23,7
23,1
SRF 305
SRF 306
SRF 3010
SRF 3020
30
30
30
30
5
6
10
20
2000
2000
2000
2000
0,02
0,02
0,04
0,07
30,4
30,4
30,8
31,5
SRF 366
SRF 369
SRF 3612
SRF 3618
SRF 3624
36
36
36
36
36
6
9
12
18
24
2400
2400
2400
2400
2400
0,02
0,02
0,04
0,07
0,07
SRF 395
SRF 3910
SRF 3915
SRF 3920
SRF 3925
39
39
39
39
39
5
10
15
20
25
2650
2650
2650
2650
2650
SRF 448
SRF 4412
SRF 4418
SRF 4424
SRF 4430
44
44
44
44
44
8
12
18
24
30
3000
3000
3000
3000
3000
Continued
142
44
Ca
[]
kN
Coa
js12
46
36
6M4
M6
30
11,24
19,59
41
6M4
M6
30
17,73
26,71
46
46
6M5
6M5
M6
M6
30
30
25,95
27,43
43,59
40,78
51
6M5
M6
30
26,83
44,86
68
68
68
68
56
56
56
56
6M5
6M5
6M5
6M5
M6
M6
M6
M6
30
30
30
30
50,55
52,77
54,44
59,24
81,97
82,18
78,06
83,01
58
58
71
71
59
59
6M5
6M5
M6
M6
30
30
42,3
47,65
65,17
62,34
56
56
56
78
78
78
84
84
84
70
70
70
6M6
6M6
6M6
M6
M6
M6
30
30
30
63,25
72,63
79,17
108,23
105,31
106,39
29,3
29,3
28,7
27,5
64
64
64
64
85
85
85
85
97
97
97
97
81
81
81
81
6M8
6M6
6M8
6M8
M6
M6
M6
M6
30
30
30
30
91,98
95
106,32
123,28
178,32
175,34
174,36
177,28
36,4
36,5
36,8
37,2
37,5
35,3
35,1
34,7
34,1
33,5
68
68
68
68
68
80
80
80
80
80
102
102
102
102
102
85
85
85
85
85
6M8
6M8
6M8
6M8
6M8
M6
M6
M6
M6
M6
30
30
30
30
30
90,45
97,52
106,6
114,14
123,6
179,39
174,05
181,1
176,57
184,38
0,02
0,04
0,07
0,07
0,07
39,4
39,8
40,2
40,5
40,9
38,3
37,7
37,1
36,5
35,9
82
82
82
82
82
100
100
100
100
100
124
124
124
124
124
102
102
102
102
102
6M10
6M10
6M10
6M10
6M10
M6
M6
M6
M6
M6
30
30
30
30
30
129,21
152,62
167,64
172,82
174,79
268,92
270,93
272,89
260,89
249
0,04
0,04
0,07
0,07
0,07
44,4
44,8
45,2
45,5
45,9
43,2
42,7
42,1
41,5
40,9
82
82
82
82
82
90
90
90
90
90
124
124
124
124
124
102
102
102
102
102
6M10
6M10
6M10
6M10
6M10
M6
M6
M6
M6
M6
30
30
30
30
30
130,48
143,71
157,74
167,81
165,86
261,47
262,87
264,94
266,95
246,44
SRF - Range
(Continued)
A
u
A1
A2
(b)
0,8
(a)
d1 d0
+0,5
0
d2
0,8
D3
D2
g6/H7
D1
3
Legend:
(a) = wiper recess
Designations
Dimensions
Lead
d0
Ph
Basic load ratings

dynamic
static
ltp
sap
d1
d2
D1
h12
Ca
[]
kN
Coa
js12
mm
SRF 485
SRF 488
SRF 4810
SRF 4815
SRF 4820
SRF 4825
48
48
48
48
48
48
5
8
10
15
20
25
3300
3300
3300
3300
3300
3300
0,02
0,04
0,04
0,07
0,07
0,07
48,4
48,6
48,8
49,2
49,5
49,9
47,3
47,1
46,7
46,1
45,5
44,9
105
105
105
105
105
105
127
127
127
127
127
127
150
150
150
150
150
150
127
127
127
127
127
127
6M12
6M12
6M12
6M12
6M12
6M12
M81
M81
M81
M81
M81
M81
30
30
30
30
30
30
198,08
218,43
231,54
257,75
265,69
285,86
481,53
470,61
475,11
486,36
462,27
491,04
SRF 5612
SRF 5624
SRF 5636
56
56
56
12
24
36
4000
4000
4000
0,04
0,07
0,07
56,8
57,5
58,3
54,7
53,5
52,3
105
105
105
112
112
112
150
150
150
127
127
127
6M12
6M12
6M12
M81
M81
M81
30
30
30
212,17
242,22
258,33
433,12
419,15
424,24
SRF 6010
SRF 6015
SRF 6020
60
60
60
10
15
20
4250
4250
4250
0,04
0,07
0,07
60,8
61,2
61,5
58,7
58,1
57,5
122
122
122
152
152
152
180
180
180
150
150
150
6M16
6M16
6M16
M81
M81
M81
30
30
30
338,57
373,06
394,97
779,69
782,69
785,66
SRF 6412
SRF 6418
SRF 6424
SRF 6430
SRF 6436
64
64
64
64
64
12
18
24
30
36
4600
4600
4600
4600
4600
0,04
0,07
0,07
0,07
0,07
64,8
65,2
65,5
65,9
66,3
62,7
62,1
61,5
60,9
60,3
120
120
120
120
120
129
129
129
129
129
180
180
180
180
180
150
150
150
150
150
6M16
6M16
6M16
6M16
6M16
M81
M81
M81
M81
M81
30
30
30
30
30
296,38
316,72
328,93
318,15
309,12
763,3
725,56
689,62
619,84
589,38
SRF 7510
SRF 7515
SRF 7520
75
75
75
10
15
20
5500
5500
5500
0,04
0,07
0,07
75,8
76,2
76,5
73,7
73,1
72,5
150
150
150
191
191
191
210
210
210
180
180
180
8M16
8M16
8M16
M81
M81
M81
2230
2230
2230
504,86
561,29
572,26
1486,68
1491,3
1495,87
SRF 8012
SRF 8018
SRF 8024
SRF 8036
SRF 8042
80
80
80
80
80
12
18
24
36
42
6000
6000
6000
6000
6000
0,04
0,07
0,07
0,07
0,07
80,8
81,2
81,5
82,3
82,7
78,7
78,1
77,5
76,3
75,7
150
150
150
150
150
156
156
156
156
156
210
210
210
210
210
180
180
180
180
180
8M16
8M16
8M16
8M16
8M16
M81
M81
M81
M81
M81
2230
2230
2230
2230
2230
410,27
455,94
485,8
442,89
425,64
1163,16
1167,63
1172,06
999,09
932,95
SRF 9920
99
20
7500
0,07
100,5 96,5
200
260
275
245
12M16
M81
15
924,86
3090,44
SRF 10024
100
24
8000
0,07
101,5 97,5
180
195
255
220
12M16
M81
15
655,81
1825,82
SRF 12024
SRF 12025
120
120
24
25
8000
8000
0,07
0,07
121,5 117,5 220

121,9 116,9 260
240
280
295
340
260
305
12M16
12M16
M81
M12
15
15
915,02
1127,43
3027,05
4037,97
SRF 15036
SRF 15025
150
150
36
25
8000
8000
0,07
0,07
152,3 146,3 280

151,9 146,9 320
305
400
Consult SKF
Consult SKF
1156,92
1596,53
4108,09
6816,05
SRF 18030
180
30
8000
0,07
182,3 176,3 420
515
Consult SKF
1962,34
9069,02
SRF 21030
210
30
8000
0,07
212,3 206,3 480
550
Consult SKF
2295,6
11375,3
143
3 Driving systems
Roller screws
TRU/PRU - Range
Cylindrical nut with backlash elimination (TRU)
or preloaded for optimum rigidity (PRU)
A
0,8
"
"
(a)
0,8
a
(b)
0,8
15
d1 d0
d2
D3
w x 45
"
Designations
D2
w x 45
Legend:
(a) = wiper recess
"
Dimensions
Lead
d0
Ph
ltp
d1
d2
g6/H7
h12
h9
mm
Basic load ratings

dynamic
static
Preload torque
Ca
Tpe
Coa
kN
Nm
TRU 84
PRU 84
8
8
4
4
400
400
8,4
8,4
7,3
7,3
25
25
44
44
4
4
12
12
26,5
26,5
5
5
6,19
6,19
9,79
9,79
0,07
TRU 125
PRU 125
12
12
5
5
600
600
12,4
12,4
13,3
11,3
30
30
44
44
4
4
12
12
31,5
31,5
5
5
9,77
9,77
13,36
13,36
0,13
TRU 155
PRU 155
TRU 158
PRU 158
15
15
15
15
5
5
8
8
750
750
750
750
15,4
15,4
15,5
15,5
14,3
14,3
14
14
35
35
35
35
50
50
50
50
4
4
4
4
16
16
16
16
36,5
36,5
36,5
36,5
5
5
5
5
14,3
14,3
15,11
15,11
21,8
21,8
20,39
20,39
0,19
TRU 206
PRU 206
20
20
6
6
1050
1050
20,4
20,4
19,3
19,3
40
40
50
50
4
4
16
16
41,5
41,5
5
5
14,78
14,78
22,43
22,43
0,3
TRU 215
PRU 215
TRU 216
PRU 216
TRU 218
PRU 218
TRU 2110
PRU 2110
21
21
21
21
21
21
21
21
5
5
6
6
8
8
10
10
1100
1100
1100
1100
1100
1100
110
110
21,4
21,4
21,4
21,4
21,5
21,5
21,8
21,8
20,3
20,3
20,3
20,3
20
20
19,7
19,7
45
45
45
45
45
45
45
45
64
64
64
64
64
64
64
64
5
5
5
5
5
5
5
5
20
20
20
20
20
20
20
20
47
47
47
47
47
47
47
47
5
5
5
5
5
5
5
5
27,85
27,85
29,08
29,08
30
30
32,64
32,64
40,98
40,98
41,09
41,09
39,03
39,03
41,51
41,51
0,33
TRU 246
PRU 246
TRU 2412
PRU 2412
24
24
24
24
6
6
12
12
1250
1250
1250
1250
24,4
24,4
24,8
24,8
23,3
23,3
22,7
22,7
48
48
48
48
58
58
58
58
5
5
5
5
20
20
20
20
50
50
50
50
5
5
5
5
23,31
23,31
26,25
26,25
32,59
32,59
31,17
31,17
TRU 255
PRU 255
TRU 2510
PRU 2510
TRU 2515
PRU 2515
25
25
25
25
25
25
5
5
10
10
15
15
1300
1300
1300
1300
1300
1300
25,4
25,4
25,8
25,8
26,2
26,2
24,3
24,3
23,7
23,7
23,1
23,1
53
53
53
53
53
53
78
78
78
78
78
78
6
6
6
6
6
6
25
25
25
25
25
25
55,5
55,5
55,5
55,5
55,5
55,5
5
5
5
5
5
5
34,85
34,85
40,02
40,02
43,62
43,62
54,12
54,12
52,65
52,65
53,2
53,2
TRU 305
PRU 305
TRU 306
PRU 306
TRU 3010
PRU 3010
TRU 3020
PRU 3020
30
30
30
30
30
30
30
30
5
5
6
6
10
10
20
20
1600
1600
1600
1600
1600
1600
1600
1600
30,4
30,4
30,4
30,4
30,8
30,8
31,5
31,5
29,3
29,3
29,3
29,3
28,7
28,7
27,5
27,5
64
64
64
64
64
64
64
64
85
85
85
85
85
85
85
85
6
6
6
6
6
6
6
6
32
32
32
32
32
32
32
32
66,5
66,5
66,5
66,5
66,5
66,5
66,5
66,5
5
5
5
5
5
5
5
5
50,68
50,68
52,34
52,34
58,58
58,58
67,92
67,92
89,16
89,16
87,67
87,67
87,18
87,18
88,64
88,64
Continued
144
Tpr
0,19
0,33
0,33
0,33
0,41
0,41
0,44
0,44
0,44
0,59
0,59
0,59
0,59
0,06-0,13
0,12-0,25
0,18-0,36
0,18-0,36
0,26-0,58
0,31-0,63
0,31-0,63
0,31-0,63
0,31-0,63
0,39-0,78
0,39-0,78
0,42-0,84
0,42-0,84
0,42-0,84
0,57-1,13
0,57-1,13
0,57-1,13
0,85-1,41
TRU/PRU - Range
(Continued)
A
0,8
"
"
(a)
0,8
a
(b)
0,8
15
d1 d0
d2
D3
w x 45
"
Designations
D2
w x 45
Legend:
(a) = wiper recess
"
Dimensions
Lead
d0
Ph
ltp
d1
d2
g6/H7
h12
h9
mm
Basic load ratings

dynamic
static
Preload torque
Ca
Tpe
Coa
kN
Tpr
Nm
TRU 366
PRU 366
TRU 369
PRU 369
TRU 3612
PRU 3612
TRU 3618
PRU 3618
TRU 3624
PRU 3624
36
36
36
36
36
36
36
36
36
36
6
6
9
9
12
12
18
18
24
24
1900
1900
1900
1900
1900
1900
1900
1900
1900
1900
36,4
36,4
36,5
36,5
36,8
36,8
37,2
37,2
37,5
37,5
35,3
35,3
35,1
35,1
34,7
34,7
34,1
34,1
33,5
33,5
68
68
68
68
68
68
18
68
68
68
80
80
80
80
80
80
80
80
80
80
5
5
5
5
5
5
5
5
5
5
25
25
25
25
25
25
25
25
25
25
70
70
70
70
70
70
70
70
70
70
5
5
5
5
5
5
5
5
5
5
49,83
49,83
53,73
53,73
58,73
58,73
62,89
62,89
68,1
68,1
89,69
89,69
87,03
87,03
90,55
90,55
88,29
88,29
92,19
92,19
TRU 395
PRU 395
TRU 3910
PRU 3910
TRU 3915
PRU 3915
TRU 3920
PRU 3920
TRU 3925
PRU 3925
39
39
39
39
39
39
39
39
39
39
5
5
10
10
15
15
20
20
25
25
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
39,4
39,4
39,8
39,8
40,2
40,2
40,5
40,5
40,9
40,9
38,3
38,3
37,7
37,7
37,1
37,1
36,5
36,5
35,9
35,9
80
80
80
80
80
80
80
80
80
80
100
100
10
10
100
100
100
100
100
100
8
8
8
8
8
8
8
8
8
8
40
40
40
40
40
40
40
40
40
40
83
83
83
83
83
83
83
83
83
83
7
7
7
7
7
7
7
7
7
7
71,19
71,19
84,09
84,09
92,36
92,36
95,22
95,22
96,3
96,3
134,46
134,46
135,46
135,46
136,45
136,45
130,45
130,45
124,5
124,5
TRU 448
PRU 448
TRU 4412
PRU 4412
TRU 4418
PRU 4418
TRU 4424
PRU 4424
TRU 4430
PRU 4430
44
44
44
44
44
44
44
44
44
44
8
8
12
12
18
18
24
24
30
30
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
44,4
44,4
44,8
44,8
45,2
45,2
45,5
45,5
45,9
45,9
43,2
43,2
42,7
42,7
42,1
42,1
41,5
41,5
40,9
40,9
80
80
80
80
80
80
80
80
80
80
90
90
90
90
90
90
90
90
90
90
6
6
6
6
6
6
6
6
6
6
32
32
32
32
32
32
32
32
32
32
82,5
82,5
82,5
82,5
82,5
82,5
82,5
82,5
82,5
82,5
7
7
7
7
7
7
7
7
7
7
71,89
71,89
79,18
79,18
86,91
86,91
92,46
92,46
91,38
91,38
130,73
130,73
131,44
131,44
132,47
132,47
133,48
133,48
123,22
123,22
0,8
0,8
0,8
0,8
0,8
0,92
0,92
0,92
0,92
0,92
1,12
1,12
1,12
1,12
1,12
0,77-1,53
0,77-1,53
0,77-1,53
0,77-1,53
1,15-1,91
0,88-1,75
0,88-1,75
0,88-1,75
0,88-1,75
1,31-2,19
1,07-2,14
1,07-2,14
1,07-2,14
1,07-21,4
1,60-2,68
Continued
145
3 Driving systems
Roller screws
TRU/PRU - Range
(Continued)
A
0,8
"
"
(a)
0,8
a
(b)
0,8
15
d1 d0
d2
D3
w x 45
"
Designations
D2
w x 45
Legend:
(a) = wiper recess
"
Dimensions
Lead
d0
Ph
ltp
d1
d2
g6/H7
h12
h9
mm
Basic load ratings

dynamic
static
Preload torque
Ca
Tpe
Coa
kN
Nm
TRU 485
PRU 485
TRU 488
PRU 488
TRU 4810
PRU 4810
TRU 4815
PRU 4815
TRU 4820
PRU 4820
TRU 4825
PRU 4825
48
48
48
48
48
48
48
48
48
48
48
48
5
5
8
8
10
10
15
15
20
20
25
25
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
48,4
48,4
48,6
48,6
48,8
48,8
49,2
49,2
49,5
49,5
49,9
49,9
47,3
47,3
47,1
47,1
46,7
46,7
46,1
46,1
45,5
45,5
44,9
44,9
100
100
100
100
100
100
103
100
100
100
100
100
127
127
127
127
127
127
127
127
127
127
127
127
8
8
8
8
8
8
8
8
8
8
8
8
45
45
45
45
45
45
45
45
45
45
45
45
103
103
103
103
103
103
103
103
103
103
103
103
7
7
7
7
7
7
7
7
7
7
7
7
109,13
109,13
120,34
120,34
127,57
127,57
142,01
142,01
146,38
146,38
157,5
157,5
240,77
240,77
235,3
235,3
237,56
237,56
243,18
243,18
231,14
231,14
245,52
245,52
1,3
TRU 5612
PRU 5612
TRU 5624
PRU 5624
TRU 5636
PRU 5636
56
56
56
56
56
56
12
12
24
24
36
36
3100
3100
3100
3100
3100
3100
56,8
56,8
57,5
57,5
58,3
58,3
54,7
54,7
53,5
53,5
52,3
52,3
100
100
100
100
100
100
112
112
112
112
112
0,12
8
8
8
8
8
8
40
40
40
40
40
40
103
103
103
103
103
103
7
7
7
7
7
7
116,9
116,9
133,45
133,45
142,33
142,33
216,56
216,56
209,58
209,58
212,12
212,12
1,68
TRU 6010
PRU 6010
TRU 6015
PRU 6015
TRU 6020
PRU 6020
60
60
60
60
60
60
10
10
15
15
20
20
3400
3400
3400
3400
3400
3400
60,8
60,8
61,2
61,2
61,5
61,5
58,7
58,7
58,1
58,1
57,5
57,5
122
122
122
122
122
122
152
152
152
152
152
152
10
10
10
10
10
10
45
45
45
45
45
45
125
125
125
125
125
125
10,5
10,5
10,5
10,5
10,5
10,5
186,53
186,53
205,54
205,54
217,61
217,61
389,85
389,85
391,35
391,35
392,83
392,83
1,88
TRU 6412
PRU 6412
TRU 6418
PRU 6418
TRU 6424
PRU 6424
TRU 6430
PRU 6430
TRU 6436
PRU 6436
64
64
64
64
64
64
64
64
64
64
12
12
18
18
24
24
30
30
36
36
3650
3650
3650
3650
3650
3650
3650
3650
3650
3650
64,8
64,8
65,2
65,2
65,5
65,5
65,9
65,9
66,3
66,3
62,7
62,7
62,1
62,1
61,5
61,5
60,9
60,9
60,3
60,3
115
115
115
115
115
115
115
115
115
115
129
129
129
129
129
129
129
129
129
129
8
8
8
8
8
8
8
8
8
8
45
45
45
45
45
45
45
45
45
45
118
118
118
118
118
118
118
118
118
118
7
7
7
7
7
7
7
7
7
7
165,57
165,57
176,93
176,93
183,76
183,76
177,73
177,73
172,69
172,69
381,65
381,65
362,78
362,78
344,81
344,81
309,92
309,92
294,69
294,69
146
Tpr
1,3
1,3
1,3
1,3
1,3
1,68
1,68
1,88
1,88
2,09
2,09
2,09
2,09
2,09
1,24-2,47
1,24-2,47
1,24-2,47
1,24-2,47
1,24-2,47
1,24-2,47
1,60-3,19
1,60-3,19
2,39-3,99
1,79-3,58
1,79-3,58
1,79-3,58
1,99-3,98
1,99-3,98
1,99-3,98
1,99-3,98
1,99-3,98
TRK/PRK - Range
Flanged nut with backlash elimination (TRK)
or preloaded for optimum rigidity (PRK)
A
B
r
(d)
(b)
0,8
(a)
(c)
A1
A2
0,8
15
d1 d 0
d2
+0,5
0
D3
Designations
D2
D1
g6/H7
Legend:
(a) = wiper recess
(c) = dowel pins to hold preload
(d) = 3 bolts for transport
(e) = equidistant
(e)
Dimensions
Lead
d0
Ph
ltp
d1
d2
D1
h12
Basic load ratings

dynamic
static
Preload torque
Ca
Tpe
[]
kN
Coa
Tpr
js12
mm
Nm
TRK 84
PRK 84
8
8
4
4
400
400
8,4
8,4
7,3
7,3
25
25
44
44
46
46
36
36
6M4
6M4
M6
M6
30
30
6,19
6,19
9,79
9,79
0,07
TRK 125
PRK 125
12
12
5
5
600
600
12,4
12,4
11,3
11,3
30
30
44
44
51
51
41
41
6M4
6M4
M6
M6
30
30
9,77
9,77
13,36
13,36
0,13
TRK 155
PRK 155
TRK 158
PRK 158
15
15
15
15
5
5
8
8
750
750
750
750
15,4
15,4
15,5
15,5
14,3
14,3
14
14
35
35
35
35
50
50
50
50
58
58
58
58
46
46
46
46
6M5
6M5
6M5
6M5
M6
M6
M6
M6
30
30
30
30
14,3
14,3
15,11
15,11
21,8
21,8
20,39
20,39
0,19
TRK 206
PRK 206
20
20
6
6
1050
1050
20,4
20,4
19,3
19,3
40
40
50
50
63
63
51
51
6M5
6M5
M6
M6
30
30
14,78
14,78
22,43
22,43
0,3
TRK 215
PRK 215
TRK 216
PRK 216
TRK 218
PRK 218
TRK 2110
PRK 2110
21
21
21
21
21
21
21
21
5
5
6
6
8
8
10
10
1100
1100
1100
1100
1100
1100
1100
1100
21
21
21
21
21
21
21,8
21,8
20,3
20,3
20,3
20,3
20
20
19,7
19,7
45
45
45
45
45
45
45
45
64
64
64
64
64
64
64
64
68
68
68
68
68
68
68
68
56
56
56
56
56
56
56
56
6M5
6M5
6M5
6M5
6M5
6M5
6M5
6M5
M6
M6
M6
M6
M6
M6
M6
M6
30
30
30
30
30
30
30
30
27,85
27,85
29,08
29,08
30
30
32,64
32,64
40,98
40,98
41,09
41,09
39,03
39,03
41,51
41,51
0,33
TRK 246
PRK 246
TRK 2412
PRK 2412
24
24
24
24
6
6
12
12
1250
1250
1250
1250
24,4
24,4
24,8
24,8
23,3
23,3
22,7
22,7
48
48
48
48
58
58
58
58
71
71
71
71
59
59
59
59
6M5
6M5
6M5
6M5
M6
M6
M6
M6
30
30
30
30
23,31
23,31
26,25
26,25
32,59
32,59
31,17
31,17
TRK 255
PRK 255
TRK 2510
PRK 2510
TRK 2515
PRK 2515
25
25
25
25
25
25
5
5
10
10
15
15
1300
1300
1300
1300
1300
1300
25,4
25,4
25,8
25,8
26,2
26,2
24,3
24,3
23,7
23,7
23,1
23,1
56
56
56
56
56
56
78
78
78
78
78
78
84
84
84
84
84
84
70
70
70
70
70
70
6M6
6M6
6M6
6M6
6M6
6M6
M6
M6
M6
M6
M6
M6
30
30
30
30
30
30
34,85
34,85
40,02
40,02
43,62
43,62
54,12
54,12
52,65
52,65
53,2
53,2
0,44
TRK 305
PRK 305
TRK 306
PRK 306
TRK 3010
PRK 3010
TRK 3020
PRK 3020
30
30
30
30
30
30
30
30
5
5
6
6
10
10
20
20
1600
1600
1600
1600
1600
1600
1600
1600
30,8
30,8
30,4
30,4
31,8
31,8
31,5
31,5
29,3
29,3
29,3
29,3
28,7
28,7
27,5
27,5
64
64
64
64
64
64
64
64
85
85
85
85
85
85
85
85
98
98
98
98
98
98
98
98
81
81
81
81
81
81
81
81
6M8
6M8
6M8
6M8
6M8
6M8
6M8
6M8
M6
M6
M6
M6
M6
M6
M6
M6
30
30
30
30
30
30
30
30
50,68
50,68
52,34
52,34
58,58
58,58
67,92
67,92
89,16
89,16
87,67
87,67
87,18
87,18
88,64
88,64
0,59
0,19
0,33
0,33
0,33
0,41
0,41
0,44
0,44
0,59
0,59
0,59
0,06-0,13
0,12-0,25
0,18-0,36
0,18-0,36
0,26-0,58
0,31-0,63
0,31-0,63
0,31-0,63
0,31-0,63
0,39-0,78
0,39-0,78
0,42-0,84
0,42-0,84
0,42-0,84
0,57-1,13
0,57-1,13
0,57-1,13
0,85-1,41
Continued
147
3 Driving systems
Roller screws
TRK/PRK - Range
(Continued)
A
(a)
(d)
(b)
0,8
r
(c)
A1
A2
0,8
15
+0,5
d1 d 0
d2
D0
D3
Designations
D2
D1
g6/H7
Legend:
(a) = wiper recess
(e) = equidistant
(e)
Dimensions
Lead
d0
Ph
ltp
d1
d2
D1
h12
Basic load ratings

dynamic
static
Preload torque
Ca
Tpe
[]
kN
Coa
mm
Nm
TRK 366
PRK 366
TRK 369
PRK 369
TRK 3612
PRK 3612
TRK 3618
PRK 3618
TRK 3624
PRK 3624
36 6
36 6
36 9
36 9
36 12
36 12
36 18
36 18
36 24
36 24
1900
1900
1900
1900
1900
1900
1900
1900
1900
1900
36,4
36,4
36,5
36,5
36,8
36,8
37,2
37,2
37,5
37,5
35,3
35,3
35,1
35,1
34,7
34,7
34,1
34,1
33,5
33,5
68
68
68
68
68
68
68
68
68
68
80
80
80
80
80
80
80
80
80
80
102
102
102
102
102
102
102
102
102
102
85
85
85
85
85
85
85
85
85
85
6M8
6M8
6M8
6M8
6M8
6M8
6M8
6M8
6M8
6M8
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
30
30
30
30
30
30
30
30
30
30
49,83
49,83
53,73
53,73
58,73
58,73
62,89
62,89
68,1
68,1
89,69
89,69
87,03
87,03
90,55
90,55
88,29
88,29
92,19
92,19
0,8
TRK 395
PRK 395
TRK 3910
PRK 3910
TRK 3915
PRK 3915
TRK 3920
PRK 3920
TRK 3925
PRK 3925
39 5
39 5
39 10
39 10
39 15
39 15
39 20
39 20
39 25
39 25
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
39,4
39,4
39,8
39,8
40,2
40,2
40,5
40,5
40,9
40,9
38,3
38,3
37,7
37,7
37,1
37,1
36,5
36,5
35,9
35,9
82
82
82
82
82
82
82
82
82
82
100
100
100
100
100
100
100
100
100
100
124
124
124
124
124
124
124
124
124
124
102
102
102
102
102
102
102
102
102
102
6M10
6M10
6M10
6M10
6M10
6M10
6M10
6M10
6M10
6M10
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
30
30
30
30
30
30
30
30
30
30
71,19
71,19
84,09
84,09
92,36
92,36
95,22
95,22
96,3
96,3
134,46
134,46
135,46
135,46
136,45
136,45
130,45
130,45
124,5
124,5
0,92
TRK 448
PRK 448
TRK 44l2
PRK 44l2
TRK 44l8
PRK 44l8
TRK 4424
PRK 4424
TRK 4430
PRK 4430
44 8
44 8
44 12
44 12
44 18
44 18
44 24
44 24
44 30
44 30
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
44,4
44,4
44,8
44,8
45,2
45,2
45,5
45,5
45,9
45,9
43,2
43,2
42,7
42,7
42,1
42,1
41,5
41,5
40,9
40,9
82
82
82
82
82
82
82
82
82
82
90
90
90
90
90
90
90
90
90
90
124
124
124
124
124
124
124
124
124
124
102
102
102
102
102
102
102
102
102
102
6M10
6M10
6M10
6M10
6M10
6M10
6M10
6M10
6M10
6M10
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
30
30
30
30
30
30
30
30
30
30
71,89
71,89
79,18
79,18
86,91
86,91
92,46
92,46
91,38
91,38
130,73
130,73
131,44
131,44
132,47
132,47
133,48
133,48
123,22
123,22
Continued
148
Tpr
js12
0,8
0,8
0,8
0,8
0,92
0,92
0,92
0,92
1,12
1,12
1,12
1,12
1,12
0,77-1,53
0,77-1,53
0,77-1,53
0,77-1,53
1,15-1,91
0,88-1,75
0,88-1,75
0,88-1,75
0,88-1,75
1,31-2,19
1,07-2,14
1,07-2,14
1,07-2,14
1,07-2,14
1,60-2,68
TRK/PRK - Range
(Continued)
A
(a)
(d)
(b)
0,8
r
(c)
A1
A2
0,8
15
+0,5
d1 d 0
d2
D0
D3
Designations
D2
g6/H7
D1
(e)
Dimensions
Lead
d0
Ph
ltp
d1
d2
Legend:
(a) = wiper recess
(e) = equidistant
D1
h12
Basic load ratings

dynamic
static
Preload torque
Ca
Tpe
[]
kN
Coa
Tpr
js12
mm
Nm
TRK 485
PRK 485
TRK 488
PRK 488
TRK 4810
PRK 4810
TRK 4815
PRK 4815
TRK 4820
PRK 4820
TRK 4825
PRK 4825
48
48
48
48
48
48
48
48
48
48
48
48
5
5
8
8
10
10
15
15
20
20
25
25
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
48,4
48,4
48,6
48,6
48,8
48,8
49,2
49,2
49,5
49,5
49,9
49,9
47,3
47,3
47,1
47,1
46,7
46,7
46,1
46,1
45,5
45,5
44,9
44,9
105
105
105
105
105
105
105
105
105
105
105
105
127
127
127
127
127
127
127
127
127
127
127
127
150
150
150
150
150
150
150
150
150
150
150
150
127
127
127
127
127
127
127
127
127
127
127
127
6M12
6M12
6M12
6M12
6M12
6M12
6M12
6M12
6M12
6M12
6M12
6M12
M81
M81
M81
M81
M81
M81
M81
M81
M81
M81
M81
M81
30
30
30
30
30
30
30
30
30
30
30
30
109,13
109,13
120,34
120,34
127,57
127,57
142,01
142,01
146,38
146,38
157,5
157,5
240,77
240,77
235,3
235,3
237,56
237,56
243,18
243,18
231,14
231,14
245,52
245,52
1,3
TRK 5612
PRK 5612
TRK 5624
PRK 5624
TRK 5636
PRK 5636
56
56
56
56
56
56
12
12
24
24
36
36
3100
3100
3100
3100
3100
3100
56,8
56,8
57,5
57,5
58,3
58,3
54,7
54,7
53,5
53,5
52,3
52,3
105
105
105
105
105
105
112
112
112
112
112
112
150
150
150
150
150
150
127
127
127
127
127
127
6M12
6M12
6M12
6M12
6M12
6M12
M81
M81
M81
M81
M81
M81
30
30
30
30
30
30
116,9
116,9
133,45
133,45
142,33
142,33
216,56
216,56
209,58
209,58
212,12
212,12
1,68
TRK 6010
PRK 6010
TRK 6015
PRK 6015
TRK 6020
PRK 6020
60
60
60
60
60
60
10
10
15
15
20
20
3400
3400
3400
3400
3400
3400
60,8
60,8
61,2
61,2
61,5
61,5
58,7
58,7
58,1
58,1
57,5
57,5
122
122
122
122
122
122
152
152
152
152
152
152
180
180
180
180
180
180
150
150
150
150
150
150
6M16
6M16
6M16
6M16
6M16
6M16
M81
M81
M81
M81
M81
M81
30
30
30
30
30
30
186,53
186,53
205,54
205,54
217,61
217,61
389,85
389,85
391,35
391,35
392,83
392,83
1,88
TRK 6412
PRK 6412
TRK 6418
PRK 6418
TRK 6424
PRK 6424
TRK 6430
PRK 6430
TRK 6436
PRK 6436
64
64
64
64
64
64
64
64
64
64
12
12
18
18
24
24
30
30
36
36
3650
3650
3650
3650
3650
3650
3650
3650
3650
3650
64,8
64,8
65,2
65,2
65,5
65,5
65,9
65,9
66,3
66,3
62,7
62,7
62,1
62,1
61,5
61,5
60,9
60,9
60,3
60,3
120
120
120
120
120
120
120
120
120
120
129
129
129
129
129
129
129
129
129
129
180
180
180
180
180
180
180
180
180
180
150
150
150
150
150
150
150
150
150
150
6M16
6M16
6M16
6M16
6M16
6M16
6M16
6M16
6M16
6M16
M81
M81
M81
M81
M81
M81
M81
M81
M81
M81
30
30
30
30
30
30
30
30
30
30
165,57
165,57
176,93
176,93
183,76
183,76
177,73
177,73
172,69
172,69
381,65
381,65
362,78
362,78
344,81
344,81
309,92
309,92
294,69
294,69
2,09
1,3
1,3
1,3
1,3
1,3
1,68
1,68
1,88
1,88
2,09
2,09
2,09
2,09
1,24-2,47
1,24-2,47
1,24-2,47
1,24-2,47
1,24-2,47
1,24-2,47
1,60-3,19
1,60-3,19
2,39-3,99
1,79-3,58
1,79-3,58
1,79-3,58
1,99-3,98
1,99-3,98
1,99-3,98
1,99-3,98
1,99-3,98
149
3 Driving systems
Roller screws
BVC - Range
(a)
"
(d)
d8
45
"
D g6 0,8
d1
0,8
d10
(b)
0,5 x 45
w x 45
12
"
0,8
B5
w x 45
"
1 x 45
0,8
A h12
B6
(b)
(c)
Legend:
(a) = key
(b) = no wiper
(c) = lubrication Q
(d) = thrust bearing FLRBU*
Screw ends can be machined to customer requirements
Maximum threaded length: can be cut and machined to customer requirements
Recirculating roller screws without end

machining, lead precision G5 according to
ISO standard.
Nut preloaded by rollers for backlash
elimination.

as lubricant
150
Designations
Dimensions
d0
B6
Basic load ratings

dynamic
static
d10
B5
mm
Ca
Coa
kN
BVC 201-R1
20
400
28
116
34
37
18,5
36,6
BVC 251-R1
25
500
33
159
42
44
32,9
68,4
BVC 321-R1
32
500
40
179
54
57
64,3
159,2
N.B.:
Nut and thrust bearing unit cannot be
modified. The standard version has the
flange of the thrust bearing is located on
the KMT side.
FLRBU / BVC
Recirculating roller screw with thrust
bearing unit
Legend:
(a) = Thrust bearing FLRBU*
(a)
B7
B8
1,6
D4 D2 D5
D3 D1
15
45
1,6
L4
Designations
L2
60
0,2
L5
L3
5xS1
x4
L1
Dimensions
d0
B7
Basic load ratings

dynamic
static
B8
L1
L2
L3
D1
D3
D4
mm
Ca
Coa
kN
FLRBU2/BVC 201-R1
20
284 397
46
10
32
90
60
76
32
27,9
31,9
FLRBU3/BVC 251-R1
25
341 497
77
13
60
90
60
74
32
40,1
63,8
FLRBU4/BVC 321-R1
32
321 497
89
16
68
120 80
100 44
74,2
119,2

as lubricant
151
3 Driving systems
Roller screws
SVC - Range
Cylindrical nut with axial play, nut without
wiper recesses
A
0,8
"
0,8
"
(a)
0,8
d1 d 0 d2
D2
w x 45
Designations
-0,3
D2
w x 45
"
d1
8 g
80: D2
d1 100 g 125: D2
"
-0,2
-0,4
Legend:
(a) = wiper on request
-0,4
-0,7
Dimensions
Lead
d1
Ph
Basic load ratings

dynamic
static
ltp
sap
d0
d2
g6/H7
h12
h9
mm
Ca
Coa
kN
SVC 81
500
0,02
7,7
7,1
20
31
12
20,8
8,4
11
SVC 101
SVC 102
10
10
1
2
650
650
0,02
0,02
9,7
9,7
9,1
9,1
22
22
31
31
2
2
12
12
22,8
22,8
5
5
8,9
8,9
11,4
11,4
SVC 121
SVC 122
12
12
1
2
750
750
0,02
0,02
11,7
11,7
11,1
11,1
24
24
31
31
2
2
12
12
24,8
24,8
5
5
10,3
10,3
14
14
SVC 161
SVC 162
16
16
1
2
1050
1050
0,02
0,02
15,7
15,7
15,1
15,1
29
29
31
31
3
3
12
12
30,2
30,2
5
5
11,5
11,5
16,8
16,8
SVC 201
SVC 202
20
20
1
2
1300
1300
0,02
0,02
19,7
19,7
19,1
19,1
34
34
37
37
3
3
16
16
35,2
35,2
5
5
18,5
18,5
36,6
36,6
SVC 251
SVC 252
25
25
1
2
1650
1650
0,02
0,02
24,7
24,7
24,1
24,1
42
42
44
44
4
4
20
20
43,5
43,5
5
5
32,9
32,9
68,4
68,4
SVC 321
SVC 322
32
32
1
2
2150
2150
0,02
0,02
31,7
31,7
31,1
31,1
54
54
57
57
4
4
25
25
55,5
55,5
5
5
64,3
64,3
159,2
159,2
SVC 401
SVC 402
40
40
1
2
2700
2700
0,02
0,04
39,7
39,3
39,1
38,2
68
68
63
72
5
5
32
32
70
70
5
5
79,1
49,9
231,6
117,2
SVC 501
SVC 502
SVC 503
SVC 504
50
50
50
50
1
2
3
4
3500
3500
3500
3500
0,02
0,04
0,04
0,04
49,7
49,3
49,5
49,3
49,1
48,7
48,6
48,2
82
82
82
82
85
85
92
85
6
6
6
6
32
32
32
32
84,5
84,5
84,5
84,5
8
8
8
8
189,8
98,1
153
98,1
544,3
249,4
443,3
249,4
SVC 632
SVC 634
63
63
2
4
4500
4500
0,04
0,04
62,3
62,3
61,2
61,2
103
103
104
104
6
6
40
40
105,5
105,5
8
8
185,8
185,8
533,5
533,5
SVC 804
80
6000
0,07
78,6
76,4
141
175
63
144
10
324,9
887,7
SVC 1005
100
8000
0,07
98,3
95,5
175
205
10
80
178
10
468,5
1376,3
SVC 1255
125
8000
0,07
123,3
120,5
220
250
12
800
223
12
756
2270
152
PVU - Range
Cylindrical nut, preloaded for optimum
rigidity, nut without wiper recesses
A
0,8
"
"
0,8
B
(a)
0,8
d1 d0 d2
D2
-0,3
D2
3
w x 45
w x 45
d1
"
Designations
"
8 g
80: D2
d1 100 g 125: D2
-0,2
-0,4
-0,4
-0,7
Legend:
(a) = wiper on request
Dimensions
d0
d1
d2
D
g6/H7
A
with wiper
recess h12
A
without wiper
recess h12
a
h9
D2
mm
PVU 81
7,7
7,1
20
40
40
0,2
12
20,8
16,5
PVU 101
PVU 102
9,7
9,7
10
10
9,1
9,1
22
22
40
40
40
40
4
4
0,2
0,2
2
2
12
12
22,8
22,8
5
5
18,5
18,5
PVU 121
PVU 122
11,7
11,7
12
12
11,1
11,1
24
24
40
40
40
40
4
4
0,2
0,2
2
2
12
12
24,8
24,8
5
5
20,5
20,5
PVU 161
PVU 162
15,7
15,7
16
16
15,71
15,71
29
29
40
40
40
40
4
4
0,5
0,5
3
3
12
12
30,2
30,2
5
5
25
25
PVU 201
PVU 202
19,7
19,7
20
20
19,71
19,71
34
34
45
45
45
45
4
4
0,5
0,5
3
3
16
16
35,2
35,2
5
5
28,5
28,5
PVU 251
PVU 252
24,7
24,7
25
25
24,1
24,1
42
42
54
54
54
54
5
5
0,5
0,5
4
4
20
20
43,5
43,5
5
5
36
36
PVU 321
PVU 322
31,7
31,7
32
32
31,1
31,1
54
54
67
67
67
67
5
5
1
1
4
4
25
25
55,5
55,5
5
5
45
45
PVU 401
PVU 402
39,7
39,3
40
40
39,1
38,2
68
68
75
84
75
84
5
5
1
1
5
5
32
32
40
70
5
5
55
57
PVU 501
PVU 502
PVU 503
PVU 504
49,7
49,3
49,5
49,3
50
50
50
50
49,1
48,7
48,6
48,2
82
82
82
82
101
101
108
101
101
101
108
101
7
7
7
7
1
1
1,5
1
6
6
6
6
32
32
35
32
84,5
84,5
84,5
84,5
8
8
8
8
70
70
70
70
PVU 632
PVU 634
62,3
62,3
63
63
61,2
61,2
103
103
120
120
120
120
7
7
1
1
6
6
40
40
105,5
105,5
8
8
94
94
PVU 804
78,6
80
76,4
141
197
197
10
1,5
63
144
10
120
PVU 1005
98,4
100
95,5
175
237
237
15
10
80
178
10
150
PVU 1255
123,3
125
120,5
120
282
282
15
12
100
223
12
185
153
3 Driving systems
Roller screws
PVK - Range
Flanged nut, preloaded for optimum rigidity,
nut without wiper recesses
u
PVK: d1 8 g 63
A
A1
A2
(b)
0,8
(d)
J
(a)
0,8
3 (e)
d1 d0
PVK: d1 8 g 125
+0,5
0
d2
D2
g6/H7
D1
u
Q
4 (e)
J
Designations
(f)
(c)
Dimensions
Lead
d1
Ph
ltp
d0
d2
D1
h12
Legend:
(a) = wiper recess
(c) = equidistant
(d) = dowel pins to hold preload
(e) = bolts for transport
(f) = key to hold preload
Basic load ratings

dynamic
static
Preload torque
Ca
Tpr
[]
kN
Coa
js12
mm
Nm
PVK 81
400
7,7
7,1
22
40
43
33
6M4
M6
30
4,8
5,5
0,02-0,08
PVK 101
PVK 102
10
10
1
2
500
500
9,7
9,7
9,1
9,1
22
22
40
40
43
43
33
33
6M4
6M4
M6
M6
30
30
5,1
5,1
5,7
5,7
0,03-0,10
0,03-0,10
PVK 121
PVK 122
12
12
1
2
600
600
11,7
11,7
11,1
11,1
25
25
40
40
46
46
36
36
6M4
6M4
M6
M6
30
30
5,9
5,9
7
7
0,05-0,15
0,05-0,15
PVK 161
PVK 162
16
16
1
2
825
825
15,7
15,7
15,1
15,1
30
30
40
40
51
51
41
41
6M4
6M4
M6
M6
30
30
6,6
6,6
8,4
8,4
0,10-0,20
0,10-0,20
PVK 201
PVK 202
20
20
1
2
1050 19,7
1050 19,7
19,1
19,1
35
35
45
45
58
58
46
46
6M5
6M5
M6
M6
30
30
10,6
10,6
18,3
18,3
0,18-0,32
0,20-0,35
PVK 251
PVK 252
25
25
1
2
1300 24,7
1300 24,7
24,1
24,1
45
45
54
54
68
68
56
56
6M5
6M5
M6
M6
30
30
18,9
18,9
34,2
34,2
0,35-0,65
0,40-0,70
PVK 321
PVK 322
32
32
1
2
1700 31,7
1700 31,7
31,1
31,1
56
56
67
67
84
84
70
70
6M6
6M6
M6
M6
30
30
36,9
36,9
79,6
79,6
0,50-0,95
0,50-0,95
PVK 401
PVK 402
40
40
1
2
2150 39,7
2150 39,3
39,1
38,2
68
68
75
84
102
102
85
85
6M8
6M8
M6
M6
30
30
45,4
28,7
115,8
58,6
0,70-1,40
0,70-1,40
PVK 501
PVK 502
PVK 503
PVK 504
50
50
50
50
1
2
3
4
2800
2800
2800
2800
49,7
49,3
49,5
49,3
49,1
48,7
48,6
48,2
82
82
82
82
101
101
108
101
124
124
124
124
102
102
102
102
6M10
6M10
6M10
6M10
M6
M6
M6
M6
30
30
30
30
109
56,3
88
56,3
272,2
124,7
221,7
124,7
1,20-2,50
1,20-2,50
1,20-2,50
1,20-2,50
PVK 632
PVK 634
63
63
2
4
3600 62,3
3600 62,3
61,2
61,2
105 120
105 120
150
150
127
127
6M12
6M12
M81
M81
30
30
106,7
106,7
266,8
266,8
1,80-3,20
2,00-3,50
M81
PVK 804
80
4000 78,6
76,4
140 197
200
170
8M16
2230
186,6
443,9
3,00-5,50
PVK 1005
100
4000 98,4
95,5
180 237
240
210
10M16 M81
15
269,1
688,2
4,50-7,50
PVK 1255
125
4000 123,3 120,5 220 282
310
270
12M18 M81
15
434
1385
7,00-10,0
154
In standard version, the FLRBU thrust

bearing unit is assembled according to
drawing pages 138, 139, 150 and 151.
If you require a different assembly, please
indicate it when ordering. Greased for life
with SKF LGEP2.
FLRBU - Accessories for roller screws

Accessories for screw shaft, flanged thrust
bearing units: FLRBU
1,6
3
D4 D2 D5
D3 D1
15
45
1,6
L2
L4
Designations
60
0,2
L5
L3
5xS1
x4
L1
Dimensions
L1
L2
L3
Attachment Angular Basic load

screw
contact ratings
L4
D1
D2
D3
h7
D4
D5
S1
Ca
Coa
Max preload Axial

Tilt rigidity
torque at 50 rigidity
rpm*
H13
mm
kN
Nm
N/m
Nm/mrad
FLRBU1
42
10
25
14 76
50
47
63
30
6,6
M625
27
13,3
14,7
0,10
150
40
FLRBU2
46
10
32
18 90
62
60
76
37
6,6
M625
32
27,9
31,9
0,25
190
51
FLRBU3
77
13
60
18 90
59
60
74
40
M825
32
40,1
63,8
0,25
400
140
FLRBU4
89
16
68
20 120 80
80
100 44
11
M1030
44
74,2
119,2
1,10
450
160
FLRBU5
110 20
82
22 140 99
100 120 54
13
M1240
54
109,4 188,4
1,10
600
715
FLRBU6
140 25
98,5
25 171 130 130 152 75
13
M1240
67
208,8 392,3
1,50
750
1000
FLRBU7
180 30
133,5 28 225 170 170 198 95
17,5 M1655
87
305,3 615,4
2,00
1250
3200
FLRBU8
235 35
179
115
473,1 1123
2,30
1500
7500
32 285 219 220 252 125 22
M20
* Preload torque measured at 50 rpm with SKF LGEP2 as lubricant
Flanged bearing
unit designations
Bearing
designations
Quantity
of bearings
FLRBU1
7201 BEGBP
FLRBU2
7303 BEGBP
FLRBU3
7204 BEGBP
FLRBU4
7305 BEGBP
FLRBU5
7307 BEGBP
FLRBU6
7310 BEGBP
FLRBU7
7313 BEGBP
FLRBU8
7318 BEGBP
155
3 Driving systems
Roller screws
Thrust bearing units for the standard roller screw range
Flanged thrust bearing
Suitable for SRC & SRF
Suitable for PRU & PRK
FLRBU1
SR 84-R4
PR 84-R4
PR 125-R5
PR 155-R5
FLRBU2
FLRBU3
FLRBU4
FLRBU5
FLRBU6
FLRBU7
FLRBU8
SR 125-R5
SR 155-R5
SR 206-R6
SR 246-R6
SR 158-R5
SR 215-R5
SR 216-R5 SR 218-R5
SR 2110-R5
SR 2412-R6
SR 255-R5
SR 2510-R5 SR 2515-R5
SR 305-R5
SR 306-R5
SR 366-R6
SR 369-R6
SR 3618-R6
SR 3020-R5
SR 3624-R6
SR 395-R5
SR 3920-R5
SR 448-R6
SR 4424-R6
SR 485-R5
SR 4815-R5
SR 5612-R6
SR 4815-R5
SR 5624-R6
SR 6412-R6
SR 6010-R5
SR 7510-R5
SR 8012-R6
SR 8036-R6
SR 3010-R5
SR 3612-R6
SR 3910-R5 SR 3915-R5
SR 3925-R5
SR 4412-R6 SR 4418-R6
SR 4430-R6
SR 488-R5 SR 4810-R5
PR 206-R6
PR 215-R5
PR 246-R6
PR 2110-R5
PR 255-R5
PR 305-R5
PR 3020-R5
PR 366-R6
PR 3618-R6
PR 395-R5
PR 448-R6
PR 3910-R5
PR 3925-R5
PR 4418-R6
PR 485-R5
PR 5612-R6
PR 4810-R5
PR 4825-R5
PR 5624-R6
PR 6010-R5
PR 6412-R6
PR 6430-R6
PR 158-R5
PR 216-R5 PR218-R5
PR 2412-R6
PR 2510-R5 PR 2515-R5
PR 306-R5 PR 3010-R5
PR 369-R6 PR 3612-R6
PR 3624-R6
PR 4412-R6
PR 3915-R5 PR 3920-R5
PR 4424-R6 PR 4430-R6
PR 488-R5
PR 4815-R5 PR 4820-R5
PR 5636-R6
PR 6015-R5 PR 6020-R5
PR 6418-R6 PR 6424-R6
PR 6436-R6
SR 4820-R5 SR 4825-R5
SR 5636-R6
SR 6418-R6 SR 6424-R6
SR 6015-R5 SR 6020-R5
SR 8018-R6 SR 8024-R6
SR 8042-R6
Flanged thrust bearing
Suitable for SVC
Suitable for PVU & PVK
FLRBU1
SV 81-R1 SV 82-R2
SV1O1-R1 SV 102-R2
SV121-R1 SV122-R2
SV161-R1 SV162-R2
SV201-R1 and SV202-R2
SV251-R1 SV252-R2
PV 81-R1-PV1O1-R1
PV121-R1-PV161-R1
PV162-R1-PV201-R1
FLRBU2
FLRBU3
FLRBU4
FLRBU5
FLRBU6
FLRBU7
FLRBU8
156
SV321-R1 SV322-R2
SV402-R1
SV401-R1
SV502-R1 SV 504-R2
SV501-R1 SV503-R2
SV632-R1 SV634-R2
SV 804-R1
SV 1005-R1
PV251-R1-PV252-R2
PV321-R1-PV322-R2
PV402-R1
PV401-R1
PV502-R1-PV504-R2
PV501 -R1-PV503-R2
PV632-R1-PV634-R2
PV804-R1
PV1005-R1
Symbols
Creq
Ca
kN
Coa
F
Fc
Fm
Fpr
Fq
Hv
I
IL
IM
Inn
Ins
Is
L
L10
L10h
M
N
Nr
Nmax
P
Ph
R
Rn
Rng
Rnr
Rs
Rt
T
TB
Tdt
Tf
Tpe
Tpr
Tst
Tt
U
V
W
X
Y
Zs
Zn
Required load rating
The dynamic load rating (L10 life) is such that 90%

of a sufficiently large sample of identical screws can
be expected to attain or exceed 1 million revolutions
under this constant centrally acting pure axial load
without fatigue (flaking).
kN
The static load rating is that axial constant centrally
acting load which produces a total permanent
deformation of one raceway and roller of 0,0001 of
the diameter of the curved surface of the roller.
N
Axial load
N
Compression load
N
Constant mean axial load
N
The preload force between a nut half (or nut) and
the shaft
N
The squeeze load applied to two nut halves (or nuts)
by the housing or fixing bolts
Vickers hardness
Inertia
kgm2
kgm2
Inertia of load
kgm2
Inertia of motor
kgm2
Inertia of nut when turning nut
kgm2
Inertia of rollers when turning shaft
kgmm2/m Inertia of screw shaft per metre
106 revs Life
106 revs Basic life rating, millions of revolutions
hours
Basic life rating, operating hours
m
Maximum difference between mean travels of screws
in a matched set
Number of thread starts on the screw shaft
Standard number of rollers
Maximum number of rollers
W
Power
mm
Lead
N/m
Rigidity
y including deflection of:
N/m
Nut rigidity
s the nut body
N/m
Minimum guaranteed
s rollers/nut contact
nut rigidity
s rollers/screw shaft
s contact
s length of screw shaft
N/m
Reference nut rigidity
b in contact with rollers
N/m
Screw shaft rigidity
N/m
Total rigidity
Nm
Torque
Nm
Brake torque
Nm
Total torque at constant speed
Nm
Torque from friction in support bearings, motor,
seals, etc
Nm
Torque for play elimination
Nm
Preload torque
Nm
Starting torque
Nm
Total torque
y
mm
Stroke length
s
h-1
Strokes per hour
s life calculation
h/day
Hours per day
s
days/year Days per year
b
years
Years
cc
Grease quantity for screw shaft
cc
Grease quantity for nut
do
d1
d2
db
ep
f
g
l
lo
l1
le
lm
ls
ltp
lu
m
mL
mn
ms
n
ncr
np
sap
t
v
v300
vu
d
a
l
st
F
s
sp
st
t
tp
h
h
hp
hp
q
w
W
Travel compensation - the difference between the

specified travel and the nominal travel. Its value is
always defined by the customer: if not specified it will
be assumed to be zero. (The specified travel can also
be defined by the specified lead multiplied by the
number of revolutions)
y
mm
Nominal
s
mm
Outside
diameter of screw shaft
s
mm
Root
mm
Bore
b
m
Tolerance of actual mean travel, lm relative to specified
travel ls
Factors
m/s2
Acceleration of gravity: 9,8
mm
Length
mm
Nominal travel - the nominal lead multiplied by the
number of revolutions
mm
Threaded length
mm
Excess travel - at each end of the threaded length a
distance le is subtracted to leave lu the useful travel.
The specified lead precision does not apply to the
lengths le. lu = l1 - 2 le
mm
Actual mean travel. The curve is the result of measurements at 20C of the screw shaft. lm is the line
which fits the curve by the method of least squares
mm
Specified travel
mm
Maximum total length
mm
Useful travel - the length of thread which is subject
to the specifi ed lead precision
kg
Mass
kg
Mass of the load
kg
Mass of the nut
kg/m
Mass of the screw shaft per metre
rpm
Rotational speed
rpm
Critical speed
rpm
Maximum permissible speed
mm
Maximum axial play
m
Manufacturing tolerance
m
Travel variation - the band width or the distance
between the two straight lines parallel to the actual
mean travel which enclose the curve
m
The bandwidth over any 300 mm section of
the useful travel. v300a and v300p are actual and
permissible values
m
The bandwidth over the useful travel. vua and vup are
actual and permissible values
m
Deflection
Helix angle of the screw shaft thread

y
Friction angle
tan l =
b
Coefficient of friction
Coefficient of friction when starting
Coefficient of friction for bearing

MPa
Nominal axial stress
MPa
Real axial stress
MPa
Total stress
MPa
Nominal shear stress
MPa
Real shear stress
Theoretical direct efficiency
Theoretical indirect efficiency
Real direct effi ciency
Real indirect effi ciency
Angle of twist
rad/s2
Angular acceleration
mmrpm Speed quotient, npdo
157
3 Driving systems
Roller screws
Applications


Plastic injection molding
Metals industry
a) Planetary roller screws
Electric presses
Tilting train
a) Recirculating roller scerws
158
Notes
159
The right solution

under all conditions
According to its own survival mode
or defence demands, the chameleon
range, SKF designs and manufactures
can quickly change its own skin colour
the ideal solutions to render each
in order to reduce its visibility to any
application faster and more efficient.
predator.
This ability of a species to adapt
to the surrounding environment has
served as an inspiration for SKF to
create customised solutions which
are totally in line with individual
requirements.
160
Beyond the standard product
Ask SKF. Your customised solution is

close at hand.
Actuation systems
About Actuation Systems
Fig.1
Fig.2
Linear drive applications often require

superior performance from the actuator
in speed, temperature stability, accuracy
and noise levels. SKF produces a large
range of actuator products designed to
satisfy the most demanding requirements.
Theassortment includes telescopic pillars
(fig.1), linear actuators (fig.2) and control
units (fig.3), providing a total system
solution for various applications. SKF leads
in the industrial field where actuators are
used in many different applications. SKF
supplies a wide range of actuators but also
offers extensive knowledge and experience
in application engineering. This background
has developed through long standing
cooperation with leading companies in many
industrial sectors.
Fig.3

Table1
Positioning
systems

Linear motors
Roller screws
Actuation
systems
Electro-mechanical
actuators
100-1 000
Ball screws
10-100
1-10
Profile rail guides
0,1-1
Driving systems
Standard slides
Guiding systems
Operating
precision (m)
161
4 Actuation systems
Selection guide
Selection guide
Selecting actuators, made easy
Finding the right electric actuator for an
application usually requires knowing many
application details and making several
calculations. However, there are ways to
first narrow the selection to one or two
safe choices. Using the selection guide on
pages 162-164, you may easily find those
actuators that meet your first criteria of
load and speed as well as basic information
about available controls and operating
devices. This is normally the most important
first step to carry out. On pages 165-223,
you will find detailed information and type
keys of the individual product(s). In case
you need more explanation on technical
terminology (glossary) and important
considerations in selecting the right actuator
for your applications, pages 230-232 may
be useful.
Telescopic pillars
TELEMAG
TELESMART
162
Type
Linear actuators
CAR & CAT series
N.B.:
as PDF files.
Max. force
push
pull
Max. speed
no load full load
Stroke
(S)
mm/s
mm
Features
Page
No.
TFG
TLG
2500
4000
2500
0
19
33
15
25
200 - 700
200 - 700
Compact
Robust
165
166
168
TXG
1 500
23
17
200 - 600
Plug & play
169
170
Linear actuators
CAT
CAR
MAGFORCE
CALA 36
MATRIX
CARE
IMD3
ID8
IA4
Type
Max. force
push
pull
Max. speed
no load full load
Stroke
(S)
mm/s
mm
Features
Page
No.
CAT 33H
CAT 33
CAT 32B
1200
3000
4000
1200
3000
4000
174
48
67
150
38
50
100 - 400
100 - 400
50 - 700
Flexible, modular
Flexible, modular
Flexible, modular
171
172
174
176
CAR 22
CAR 32
CAR 40
1500
3500
6000
1500
3500
6000
30
60
60
20
40
40
50 - 300
50 - 700
100 - 700
High duty factor

High duty factor
High duty factor
179
180
181
182
WSP
ASM
DSP
SKG
SKD
STW
STG
STD
SKS/SKA
SLS
2600
4000
4500
15000
15000
15000
15000
15000
30000
50000
2600
4000
4500
15000
15000
15000
15000
15000
30000
50000
50
50
40
55
25
12
14
10
45
70
50
50
40
55
25
12
14
10
45
70
100 - 600
100 - 600
100 - 600
100 - 600
100 - 600
100 - 600
100 - 600
100 - 600
100 - 600
100 - 600
Powerful
Powerful
Powerful
Powerful
Powerful
Powerful
Powerful
Powerful
Powerful
Powerful
183
184
185
186
187
188
189
190
191
192
193
CALA 36A
600
600
23
12
50 - 200
In-line
194
MAX1
MAX3
MAX6
4000
8000
8000
4000
6000
6000
18
18
18
13
13
15
50 - 700
50 - 700
50 - 700
Silent operation
Silent operation
Plug & play
196
197
198
199
CARE 33H
CARE 33M
CARE 33A
800
1400
2000
800
1400
2000
45
22
12
32
16
8
50 - 500
50 - 500
50 - 300
Silent operation
Silent operation
Silent operation
200
200
200
IMD3-05
IMD3-10
IMD3-20
IMD3-30
IMD3-40
120
240
500
750
1000
120
240
500
750
1000
57
30
16
10
8
45
24
13
8
6
50 - 300
50 - 300
50 - 300
50 - 300
50 - 300
Silent operation
Silent operation
Silent operation
Silent operation
Silent operation
202
202
202
202
202
ID8A-10
ID8A-20
ID8B-05
ID8B-10
ID8B-20
1500
2500
2300
3500
4500
1500
2500
2300
3500
4500
38
20
65
36
22
25
13
45
22
13
102 - 610
102 - 610
102 - 610
102 - 610
102 - 610
Robust
Robust
Robust
Robust
Robust
204
204
206
206
206
IA4A-10
IA4A-20
IA4B-05
IA4B-10
IA4B-20
1500
2300
2300
4500
6000
1500
2300
2300
4500
6000
29
16
57
29
22
25
14
46
25
13
102 - 610
102 - 610
102 - 610
102 - 610
102 - 610
Robust
Robust
Robust
Robust
Robust
208
208
210
210
210
163
4 Actuation systems
Selection guide
Control units
BCU
SCU
Hand switches
EHA
Foot switches
ST
Desk switches
ST
164
Type
Control
Max. motor
connections
Input
Output
Page
V/A
No.
BCU 4/5/8/9
Basic functions
230/120AC
24/7
SCU
Synchronous
22-40DC
120AC
230AC
24/23 or 30
24/18
Type
Operating power
Max. operating Prot. class

motors
VDC/mA
IP
EHA 3
12/50
67
Type
Operating power

motors
VDC/mA
IP
STJ
12/50
X5
Type
Operating power

motors
VDC/mA
IP
12/50
X0
STE
Colour
213
216
Page
No.
Grey
218
Colour
Page
No.
Blue/anthracite
220
Colour
Page
No.
Black
222
Telescopic pillars
Fig.4
TELEMAG
The Telemag line of telescopic pillars
features the best combination of minimum
retracted length and large stroke length
(fig.4). They are used wherever robust
and safe guiding systems are needed. The
attractive design allows the Telemag to
often become part of the overall design of
the equipment.
Benefits
High offset load
Silent operation
Robust
Long life time
Type
Force
push
pull
N
TFG
TLG 10/11-A
TLG 10/11-B
TLG 10/11-C
2500
4000
2500
1500
2500
0
0
0
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
IP
kg
200700
200700
200700
200700
S+130
S+180
S+180
S+180
24DC - 120/230AC
24DC
24DC
24DC
30
30
30
30
819
1530
1530
1530
19
14
17
33
15
10
13
25
165
4 Actuation systems
Telescopic pillars
TELEMAG TFG
Telemag TFG (fig.5) is a very compact, fast
and powerful lifting pillar for loads of up
to 2500 N. The TFG can be used for push
or pull applications. Thanks to the rigid
aluminium profiles and the precision glide
pads, the TFG can lift offset loads without
distorting. The pillar consists of three
designed aluminium profiles inside each
other which are extended and retracted
by means of an integrated linear actuator.
TFGintegrates a DC-motor with worm gear,
whose rotary motion is converted into a
linear motion by means of a spindle nut
system.
The pillars run very quietly and with
minimum vibration at a maximum speed
of 19mm/s. Maximum stroke length is
700mm. The TFG is self-locking for both
push and pull. The stroke is limited by
integrated end limit switches. For additional
safety, the TFG has cut-off switches at the
end positions as well as a back up nut.
Fig.5
The TFG is compatible with all the other

actuators from SKF and can be utilized in
afull system of actuators and controls.
Benefits
Push or pull force
Compact design
Fast movement
Powerful
Options
Encoder
Cable feed-through
Accessories
Control boxes
Hand switches
Foot switches
Standards
EN/IEC 60601-1
UL 60601-1
Technical data
Type
24VDC
120/230 VAC
Max. force* (push or pull)

Speed
Stroke
Retracted length (3 sections)
Voltage input
Current consumption
Duty cycle intermittent operation
Duty cycle short-time operation
Ambient temperature
Protection class
Isolation class
Weight
N
mm/s
mm
mm
V
A
2500
15 to 19
200 to 700
S+130
24
5
1/9 min
3 min
+10 to +40
30
SELV
8 to 19
2500
15 to 19
200 to 700
S+130
120/230
1,8/1
1/9 min
3 min
+10 to +40
30
I
8 to 19
C
IP
kg
* See offset load diagram on next page.
Type code for accessories

Mains cable
Top mounting plate
Bottom mounting plate
Screw for top mounting plate
Screw for top mounting plate
Screw for bottom mounting plate
Mains cable SEV
Mains cable Schuko
Mains cable US
Mains cable British Standard
166
Order number
Bore 7272 mm
Bore 102,5102,5 mm
M1025 (1 screw required)
M630 (4 screws required)
M630 (4 screws required)
3000 mm, black, 30,75 mm2
3000 mm, black, 30,75 mm2
3000 mm, black, 30,75 mm2
3000 mm, black, 30,75 mm2
333360
264363
510978
510709
510709
304345
304346
304347
304355
TELEMAG TFG
0
15 30 2
1 7
Performance diagram
20
17
180
160
72
Speed (mm/s)
20
19
Min. 10
4x8,5
18
(a)
72 17
Current consumption (A)

6
7
20 2
17
16
11
15
14
M10
13
12
12
x25
4xM6
9 Nm
500 1000 1500 2000 2500

Load (N)
Legend:
S = stroke
L = retracted length
(a) = O
ption fastening
plate Magnetic
no 333360
10
250
L = S + 130 mm
13
N
N1
02,5
196
13
500 1000 1500 2000 2500

Load (N)
Offset load diagram - 200 mm stroke
Load (N)
2500
Load (N)
2500
2000
2000
Overload
1500
5
x2
M6
4x Nm
9
200
400
Slipstickarea
500
Ideal
load
0
Ideal
load
1000
Slipstickarea
500
Overload
1500
Ideal
load
1000
600 800 1000

Load distance (N)
200
400
600 800 1000

Load distance (N)
Load (N)
2500
Load (N)
2500
Load (N)
2500
2000
2000
Overload
1500
1000
200
400
1500
600 800 1000

Load distance (N)
Ordering key
500
Ideal
load
0
200
Ideal
load
1000
500
0
Overload
1500
Ideal
load
1000
Ideal
load
500
2000
Overload
400
600 800 1000

Load distance (N)
0 - 2 3
T F G
Ideal
load
0
200
400
600 800 1000

Load distance (N)
- 0 0 0
Type
Voltage:
24 VDC
120 VAC (50/60 Hz)
230 VAC (50 Hz)
Stroke (S):
200 mm
250 mm
300 mm
350 mm
400 mm
500 mm
700 mm
Option:
No option
With dual encoder, (14 pulses per 9 mm travel)
With mains cable feedthrough (3AWG16)
With control cable feedthrough (10AWG28)
1
5
9
200
250
300
350
400
500
700
000
E
C
H
167
4 Actuation systems
Telescopic pillars
TELEMAG TLG
0
Type
20
15
22
Force
push
pull
TLG 10/11-A
TLG 10/11-B
TLG 10/11-C
12
4000
2500
1500
0
0
0
Max. speed
no
full
load
load
Stroke
(S)
Retr.
Length
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
VDC
IP
kg
200700
200700
200700
S+180
S+180
S+180
24
24
24
30
30
30
15-30
15-30
15-30
14
17
33
10
13
25
14
Duty cycle 1 min/9min.
16

0
20
15
22
Legend:
S = stroke
Accessories
Order number
Top mounting plate for 2 tube set

Bottom mounting plate for 2 tube set
Top mounting plate for 3 tube set
Bottom mounting plate for 3 tube set
Screw (4/plate) for mounting plate
290268
290351
290268
290265
510707
Ordering key
- 0 0 0
T L G 1
Type
Motor voltage:
24 VDC
Load:
4000 N
2500 N
1500 N
Tube set:
Tube set 2
Tube set 3
Stroke (S):
200 mm
300 mm
400 mm
500 mm
600 mm
700 mm
Cable/connecting plug:
Straight, 2,3 m, jack plug
Straight, 1,0 m, DIN8 plug
Coiled, 0,6 m, DIN8 plug
Option:
No option
Single encoder, 8 pulses, cable with jack plug
Dual encoder, cable with DIN8 plug
168
0
A
B
C
A
D
2
3
4
5
6
7
2
3
4
B
0
A
F
TELESMART
Fig.6
This cost effective telescopic pillar offers an

attractive design for height adjustable desks,
tables, chairs and lightweight industrial
workstations (fig.6).
The TXG series has an integrated control
unit and combines the advantages of AC
and DC power.
The pillars can be controlled by using
desk, hand or foot switches.
Benefits
Easy plug and play system
Powerful and fast lifting
Aesthetic design
Cost effective
Duty cycle 1 min./9 min.
Type
Force
push
pull
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
TXG 1
1500
23
17
200600
S+160/180
24 DC
30
813
TXG 4/5
1500
23
17
200600
S+160/180
120 AC
30
914
TXG 8/9
1500
23
17
200600
S+160/180
230 AC
30
914
169
4 Actuation systems
Telescopic pillars
TELESMART TXG
Type
22
15
10
Force
push
pull
Max. speed
no
full
load
load
Stroke
(S)
Retr.
Length
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
IP
kg
200600
S+160/180
24 DC
30
813
14
TXG 1
18
1500
23
17
TXG 4/5
1500
23
17
200600
S+160/180
120 AC
30
914
TXG 8/9
1500
23
17
200600
S+160/180
230 AC
30
914
12
22
10
15
Legend:
S = stroke
Mains cable
Plug
Country
Order number
Comment
Straight cable 3,5

Straight cable 3,5
Straight cable 3,5
Straight cable 3,5
Top or bottom
mounting plate
Euro
Schuko
UL
British standard
General
DE
USA
UK
304330/304345
304331/304346
304332/304347
304333/304355
2-pole/3-pole
2-pole/3-pole
2-pole/3-pole
2-pole/3-pole
Ordering key
304338
- 00
T X G
Type
Motor voltage:
24 VDC (slave actuator)
120 VAC, 50/60 Hz, class II
120 VAC, 50/60 Hz, class I (mandatory for cable feedthrough)
230 VAC, 50 Hz, class II
230 VAC, 50 Hz, class I (mandatory for cable feedthrough)
Output for an additional DC Motor:
Not used (Stand alone)
24 VDC (Master, not available for TXG1)
Colour:
Natural anodized coating
Options (*24 VDC, **230/120 VAC with anti-pinching protection):
None
Control connection feedthrough
Maints cable feedthrough
Encoder for LD*/slave use*
Encoder for other controls* (e.g. BCU, VCU, SCU)
Retract**, memory
Control connection feedthrough**, mains cable feedthrough**
Retract**, memory, mains cable feedthrough
Control connection feedthrough, retract**, memory
Control connection feedthrough, retract**, memory, mains cable feedthrough
Extend**, retract**, memory, parallel operation of 2 actuators, min. configuration for master/slave use
Extend**, retract**, memory, parallel operation of 2 actuators, mains cable feedthroug
Extend**, retract**, memory, parallel operation of 2 actuators, control connection feedthrough
Extend**, retract**, memory, parallel operation of 2 actuators, control/mains cable feedthrough
Stroke (S)/Retr. length (L=S+180):
200 mm
300 mm
400 mm
500 mm
600 mm
170
1
4
5
8
9
0
1
5
000
EYX
EYF
EYS
EXG
2CA
2AA
3AW
3AY
4AG
4AL
5AA
5AC
6AA
200
300
400
500
600
00
Linear actuators
Fig.7
CAT
The CAT (fig.7) modular design concept
makes it easy to interchange critical
components such as motors, gears, screws,
attachments, etc. Custom built actuators
are easily and cost efficiently built from
standard parts. The CAT range flexibility
makes it suitable for a high number of
applications.
Benefits:
Small
Robust
Highly efficient
Lubricated for service life
Duty factor diagram
F actual
(%)
F rated
100
Duty factor % = N 100

N+R
80
60
40
20
0
Type
Force
push
pull
6F
220 V
25 F
110 V
N+R
4F
220 V
16 F 3 F
12 F
110 V 220 V 110 V
20
40
35
60
N = running time
R = rest period
N + R = total cycle time
80 100
Duty factor
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
CAT 33H
1200
1200
174
150
100400
S+150/158/189
12/24 DC
120/230/400 AC
20/44/54/65
22,7
CAT 33
3000
3000
48
38
100400
S+150/158/189
12/24 DC
120/230/400 AC
20/44/54/65
22,7
CAT 32B
4000
4000
67
50
50700
S+167/175/206
12/24 DC
120/230/400 AC
20/44/54/65
23,5
* Dimension depends on selected front attachment
171
4 Actuation systems
Linear actuators
29
55
33
CAT 33H
L=S+ (150/158/189)*
23
Legend:
S = stroke
73
See drawings of front and rear attachments

and motor options on page 178
Type
Force
push
pull
N
CAT 33H
1200
1200
172
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100400
S+150/158/189
12/24 DC
120/230/400 AC
20/44/65
20/54/55
22,7
174
150
24
Ordering key
Dynamic load (N)/Speed (mm/s)

1200/xx
1000/50-38
1000/50-38
1200/56-36
1200/27-17
1200/56-36
1200/56-36
1200/56-36
1200/27-17
1200/20
1200/20
1200/20
1200/20
1200/20
900/xx
600/100-80
600/100-80
900/113-79
800/60-35
900/113-79
900/113-79
900/113-79
800/60-35
900/37
900/37
900/37
900/37
900/37
Motor options
600/xx
400/174-150
400/174-150
500/174-140
500/100-69
500/174-140
500/174-140
500/174-140
500/100-69
500/90
500/90
500/90
500/90
500/90
No motor
12 VDC, IP44 (65)
12 VDC, flat motor, IP44
24 VDC, IP44 (65)
24 VDC, low speed, IP44 (65)
24 VDC, flat motor, brake, IP20
24 VDC, flat motor, ext. shaft, IP44
24 VDC, flat motor, low speed, IP44
120 VAC/60 Hz, 1-phase, IP54
120 VAC/60 Hz, 1-phase, brake, IP20
0000
C12C
D12C
C24C
C24CW
D24C
D24CB
D24CS
D24CW
E110C
E110CB
E220C
E220CB
E380C
C A T
33H
Type
Motor assembly:
Right
Left
Stroke (S):
100 mm
200 mm
300 mm
400 mm
Rear attachment (see page 178):
Fork ear, =12,0 mm
Fork ear, =12,7 mm
Single ear, =12,0 mm
Front attachment (see page 178):
Hole, =12,0 mm
Hole, =12,7 mm
Male thread, M12
Female thread, M12
Fork ear, =10,1 mm
Feed back:
No encoder (no code)
Encoder (ony for CxxC motors)
Encoder (for all standard motors)
Options:
Friction clutch
No friction clutch
Options for CxxC motors:
No cable
EMC filter
Motor without cover
IP65 (mandatory to state type of cable T2 or T2P)
Straight cable, 2,0 m, no plug
Straight cable, 2,0 m, jack plug
R
L
100
200
300
400
A1
A2
K1
K2
G1
G2
G3
G4
G5
E
E2
F
Z
U
M
N
I
T2
T2P
173
4 Actuation systems
Linear actuators
29
55
33
CAT 33
L=S+ (150/158/189)*
23
Legend:
S = stroke
73

Type
Force
push
pull
N
CAT 33
3000
3000
174
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100400
S+150/158/189
12/24 DC
120/230/400 AC
20/44/65
20/54/55
22,7
48
38
24
Ordering key
Motor options
3000/xx
3000/13-10
2400/11-7
3000/13-10
3000/7-5
3000/13-10
3000/13-10
3000/7-5
2400/6
2400/6
3000/5
3000/5
3000/5
2000/xx
2000/24-20
1600/21-15
2000/26-20
2000/13-8
2000/26-20
2000/26-20
2000/13-8
1600/12
1600/12
2000/10
2000/10
2000/10
1000/xx
1000/48-38
800/39-21
1000/48-35
1000/26-19
1000/48-35
1000/48-35
1000/26-19
800/24
800/24
1000/20
1000/20
1000/20
No motor
12 VDC, IP44 (65)
24 VDC, IP44 (65)
24 VDC, low speed, IP44 (65)
24 VDC, flat motor, IP44, ext. shaft
0000
C12C
D12C
C24C
C24CW
D24C
D24CS
D24CW
E110C
E110CB
E220C
E220CB
E380C
C A T
33
Type
Motor assembly:
Right
Left
Stroke (S):
100 mm
200 mm
300 mm
400 mm
Fork ear, =12,0 mm
Fork ear, =12,7 mm
Hole, =12,0 mm
Hole, =12,7 mm
Male thread, M12
Female thread, M12
Fork ear, =10,1 mm
Feed back:
Options:
Friction clutch
No friction clutch
No cable
EMC filter
Motor without cover
IP65 (mandatory to state type of cable T2 or T2P)
R
L
100
200
300
400
A1
A2
K1
K2
G1
G2
G3
G4
G5
E
E2
F
Z
U
M
N
I
T2
T2P
175
4 Actuation systems
Linear actuators
29
55
32
CAT 32B
L=S+(167/175/206)*
23
Legend:
S = stroke
73

Type
Force
push
pull
N
CAT 32B
4000
4000
176
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
50700
S+167/175/206
12/24 DC
120/230/400 AC
20/44/65
20/54/55
23,5
67
50
24
Ordering key
Motor options
4000/xx
4000/17-12
3000/17-11
4000/17-13
4000/9-5
4000/17-13
4000/17-13
4000/17-13
4000/9-5
3500/8
3500/8
3500/6,5
3500/6,5
3500/6,5
2500/xx
2500/32-25
2000/34-19
2500/33-24
2500/18-10
2500/33-24
2500/33-24
2500/33-24
2500/18-10
2500/16
2500/16
2500/13
2500/13
2500/13
1500/xx
1500/63-48
1000/67-43
1500/65-50
1500/34-24
1500/65-50
1500/65-50
1500/65-50
1500/34-24
1500/32
1500/32
1500/26
1500/26
1500/26
No motor
12 VDC, IP44 (65)
24 VDC, IP44 (65)
24 VDC, low speed motor, IP44
24 VDC, flat motor, ext.shaft, IP44
0000
C12C
D12C
C24C
C24CW
D24C
D24CB
D24CS
D24CW
E110C
E110CB
E220C
E220CB
E380C
C A T
32B
Type
Motor assembly:
Right
Left
Stroke (S):
50 mm
100 mm
200 mm
300 mm
400 mm
500 mm
700 mm
Fork ear, =12,0 mm
Fork ear, =12,7 mm
Hole, =12,0 mm
Hole, =12,7 mm
Male thread, M12
Female thread, M12
Fork ear, =10,1 mm
Feed back:
Options:
Friction clutch
No friction clutch
Back-up ball nut
No cable
EMC filter
Motor without cover
IP65 (mandatory to state type of cable)
R
L
50
100
200
300
400
500
700
A1
A2
K1
K2
G1
G2
G3
G4
G5
E
E2
F
Z
S
U
M
N
I
T2
T2P
177
4 Actuation systems
Linear actuators
Rear attachments
Motors
Front attachments and retracted length
120
75
300 mm (a)
12 H8
12,0 e8
27,5
57
73 (c)
98 (b)
22
300 mm (a)
L=S+ 150 (C AT 33/33H)*

L=S +167 (C AT 32B)
G1

D12C, D24C, D24CB, D24CS, D24CW
20
78
12,7 H8
61,5
22
13
52
A1
120
13
12,7 e 8
L=S+150 (C AT 33/33H)*
L=S+ 167 (C AT 32B)
G2
C12CN, C24CN, C24CWN

900 mm (a)
80
(b)
1000 mm (a)
20
50
M12x1,75
38
27,5
13
13
A2
108
L=S+189 (C AT 33/33H)*
L=S +206 (C AT 32B)
52
M12x1,75
G3
12 e 8
24
E110C, E110CB, E220C, E220CB

88
L=S+ 150 (C AT 33/33H)*
L=S +167 (C AT 32B)
145
G4
52
K1
6,1
10,1
L=S+158 (C AT 33/33H)*
12,7 E8
C12CM, C12CME, C24CM, C24CME,

C24CWM, C24CWME
L=S +175 (C AT 32B)
24
25,9
28
13
88
124
G5
52
K2
C12C, C24C, C24CW
201
Legend:
(a) = cable length
(b) = cover for brake
(c) = D24CS version
S = stroke
154
82
104
*If S =400, add 50 mm to retracted length.
178
E380C
13
CAR
Fig.8
The CAR (fig.8) range of industrial type

actuators offers a unique standard of
performance, durability, and reliability. The
compact design incorporates well-proven
parts like the SKF high efficiency ball screw,
a sturdy gearbox assembly, and high quality
DC and AC-motors. These provide the best
performance possible with an extended
operational life. Individual application
requirements can easily be matched thanks
to the modular design concept.
Benefits:
Robust and reliable
Long life time
Wide component range
Left and right hand versions
CAR 22, 32, 40 ... 24/12 VDC
CAR32 ... 230/120 VAC
F actual
(%)
F rated
100
CAR40 ...230/120 VAC
Gear
F (N)
3500
2500
1500
Gear
F (N)
6000
6 F(360 V)/25 F(240 V)
5000
3000
73
2500
50
1500
4 F(360 V)/16 F(240 V)
1000
2000
1500
900
3000
500
Type
33
50
Force
push
N
12 F(360 V)/37,5 F(240 V)
8 F(360 V)/25
F(240 V)
1600
2000
800
2000
1000
1000
300
100 %
Duty factor
pull
2400
3000
4000
3 F(360 V)/12
F(240 V)
1000
500
4000
30
60
100 %
Duty factor
10
20
30
40
50 60 %
Duty factor
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
CAR 22
1500
1500
30
20
50300
S+205
12/24 DC
44
1,21,6
CAR 32
3500
3500
60
40
50700
S+218
12/24 DC
120/230 AC
20/44/54
2,13,7
CAR 40
6000
6000
60
40
100700
S+263
12/24 DC
120/230 AC
20/44/54
5,88,4
179
4 Actuation systems
Linear actuators
CAR 22
86
46
Legend:
S = stroke
300
53
22
16
26
M10 1,5
66
35
10 e8
104
L = S + 205
Type
Force
push
pull
N
CAR 22
Ordering key
60
16,5 23
23
1500
1500
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
50300
S+205
12/24 DC
44
1,21,6
30
20
Motor options
1500/xx
1500/15-10
1500/15-10
No motor
1000/xx
1000/30-20
1000/30-20
2
C A R
22
Type
Motor assembly:
Right
Left
Stroke (S):
50 mm
100 mm
150 mm
200 mm
300 mm
180
R
L
050
100
150
200
300
0000
D12B
D24B
CAR 32
120 (c)
120
97
3917987
58
28
32
20
38
71
L=S+218
108
156(b)
150
198(b)
300 mm (a)
100(b)
300 mm (a)
M12x1,75
3917987
55
27,5
75
74(c)
Legend:
S = stroke
(a) = cable length
(b) = cover for brake (D24CB)
(c) = D24CS version
23 27,5
73
104
57
12 e8
12
3917987
3917987
4
Type
Force
push
pull
N
CAR 32
Ordering key
3500
3500
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
50700
S+218
12/24 DC
120/230 AC
20/44/54
2,13,7
60
40
Motor options
3500/xx
2500/15-10
3500/15-10
3500/9-5
3500/15-10
3500/15-10
3500/8
3500/8
3500/6
3500/6
2500/xx
2000/30-20
2500/30-20
2500/18-10
2500/30-20
2500/30-20
2500/16
2500/16
2500/13
2500/13
1500/xx
1000/60-40
1500/60-40
1500/34-24
1500/60-40
1500/60-40
1500/32
1500/32
1500/26
1500/26
0000
D12C
D24C
D24CW
D24CS
D24CB
E110C
E110CB
E220C
E220CB
No motor
24 VDC, flat motor, extended shaft, IP44
230 VAC/50 Hz, 1- phase, brake, IP20
C A R
32
Type
Motor assembly:
Right
Left
Stroke (S):
50 mm
100 mm
200 mm
300 mm
500 mm
700 mm
Options:
Friction clutch
Back-up nut
R
L
50
100
200
300
500
700
F
S
181
4 Actuation systems
Linear actuators
CAR 40
Legend:
S = stroke
AC motor
Type
Force
push
pull
N
CAR 40
Ordering key
6000
6000
DC motor
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100700
S+263
12/24 DC
120/230 AC
20/44/54
5,88,4
60
40
Motor options
6000/xx
6000/15-10
6000/15-10
6000/15-10
6000/10
6000/10
6000/9
6000/9
4000/xx
4000/30-20
4000/30-20
4000/30-20
4000/20
4000/20
4000/17
4000/17
2000/xx
2000/60-40
2000/60-40
2000/60-40
2000/40
2000/40
2000/34
2000/34
No motor
24 VDC, flat motor, extended shaft, IP44
C A R
40
Type
Motor assembly:
Right
Left
Stroke (S):
100 mm
300 mm
500 mm
700 mm
Options:
Friction clutch
Back-up nut
182
0000
D24D
D24DS
D24DB
E110D
E110DB
E220D
E220DB
R
L
100
300
500
700
F
S
MAGFORCE
include many interface options as hall

encoder, end switch, extended shaftetc.
The MAGFORCE (fig.9) line consists of

spindle lifting drives with worm gears. They
fulfill the highest demands for industrial and
other applications. The drives are available
in several different motor versions.
MAGFORCE offers strong, fast and quiet
movements with high duty cycle. The drives
Type
Force
push
pull
Fig.9
Benefits:
Ideal for heavy load applications
Wide speed/force range
Robust design
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
WSP 0510
WSP 1030
WSP 1550
WSP 2650
STW 5007
STW 7010
STW 10020
STW 15040
500
1000
1500
2600
5000
7000
10000
15000
500
1000
1500
2600
5000
7000
10000
15000
50
18
10
5
12
8
4
2
50
18
10
5
12
8
4
2
100600
100600
100600
100600
100600
100600
100600
100600
S+230
S+230
S+230
S+230
S+273
S+273
S+273
S+273
230 AC
230 AC
230 AC
230 AC
230 AC
230 AC
230 AC
230 AC
54
54
54
54
54
54
54
54
5,5
5,5
5,5
5,5
14,6
14,6
14,6
14,6
DSP 1010
DSP 2530
DSP 3250
DSP 4550
STD 10007
SKD 10007
SKD 12010
STD 12010
SKD 15020
SKD 15040
STD 15040
STD 15020
SK(S/A) 15404
SLS 18006
SK(S/A) 20406
SK(S/A) 25412
SK(S/A) 30423
SLS 34013
SLS 50020
SLS 50028
SLS 50050
1000
2500
3200
4500
10000
10000
12000
12000
15000
15000
15000
15000
15000
29000
20000
25000
30000
40000
50000
50000
50000
1000
2500
3200
4500
10000
10000
12000
12000
15000
15000
15000
15000
15000
29000
20000
25000
30000
40000
50000
50000
50000
40
15
10
5
10
25
21
7
11
5
2
4
45
70
33
17
9
35
23
16
9
40
15
10
5
10
25
21
7
11
5
2
4
45
70
33
17
9
35
23
16
9
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
S+230
S+230
S+230
S+230
S+273
S+406
S+406
S+273
S+406
S+406
S+273
S+273
S+465
S+446
S+465
S+465
S+465
S+446
S+446
S+446
S+446
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
5,5
5,5
5,5
5,5
14,6
14,6
14,6
14,6
14,6
14,6
14,6
14,6
30,0
48,0
30,0
30,0
30,0
40,0
40,0
40,0
40,0
ASM 1010
ASM 2030
ASM 3030
ASM 4050
SKG 6005
STG 10007
SKG 10010
STG 12010
SKG 13020
SKG 15040
STG 15040
STG 15020
1000
2000
3000
4000
6000
10000
10000
12000
13000
15000
15000
15000
1000
2000
3000
4000
6000
10000
10000
12000
13000
15000
15000
15000
50
17
8
5
55
14
30
11
15
8
3
5
50
17
8
5
55
14
30
11
15
8
3
5
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
100600
S+230
S+230
S+230
S+230
S+406
S+273
S+406
S+273
S+406
S+406
S+273
S+273
12/24 DC
12/24 DC
12/24 DC
12/24 DC
24 DC
24 DC
24 DC
24 DC
24 DC
24 DC
24 DC
24 DC
44
44
44
44
54
54
54
54
54
54
54
54
5,0
5,0
5,0
5,0
14,6
14,6
14,6
14,6
14,6
14,6
14,6
14,6
183
4 Actuation systems
Linear actuators
Magforce WSP
127
108
90
12+0,09+0,04
20
30
25
228
10H11
90
10H8
56
161
199
31
122
30
44
10
72
48
15
60
L = S + 230
72,5
120
Legend:
S = stroke
Type
16
Force
push
pull
N
WSP 0510
WSP 1030
WSP 1550
WSP 2650
500
1000
1500
2600
500
1000
1500
2600
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+230
S+230
S+230
S+230
230 AC
230 AC
230 AC
230 AC
54
54
54
54
5,5
5,5
5,5
5,5
50
18
10
5
50
18
10
5
Duty cycle 25%
Accessories
Order number
Free wheel brake on push force

Free wheel brake on pull force
Friction brake for pull/push force
Limit switch
1028,6226
1028,0002
1028,7851
1043,0209
Ordering key
W S P
Type
Load:
500 N
1000 N
1500 N
2600 N
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
Additional bushing (L=S+280 mm)
Extended shaft
Protection tube made out of stainless steel
Bronze nut, special grease for 30 C
184
0510
1030
1550
2650
100
200
300
400
500
600
01
15
16
30
91
Magforce ASM
80
103
25
12+0,09+0,04
225
203
165
10H11
78
20
30
31
56
10H8
30
44
10
72
120
48
L = S + 230
Legend:
S = stroke
Type
16
Force
push
pull
N
ASM 1010
ASM 2030
ASM 3030
ASM 4050
15
1000
2000
3000
4000
1000
2000
3000
4000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+230
S+230
S+230
S+230
12/24 DC
12/24 DC
12/24 DC
12/24 DC
44
44
44
44
5
5
5
5
50
17
8
5
50
17
8
5
Duty cycle 10%
Accessories
Order number

Limit switch
1028,6226
1028,0002
1028,7851
1043,0210
Ordering key
A S M
Type
Load:
1000 N
2000 N
3000 N
4000 N
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
12 VDC, standard
24 VDC, standard
24 VDC, additional bushing (L=S+280 mm)
24 VDC, bronze nut, special grease for 30 C
24 VDC, protection tube made out of stainless steel
24 VDC, extended shaft
12 VDC, additional bushing (L=S+280 mm)
1010
2030
3030
4050
100
200
300
400
500
600
01
02
05
07
12
16
19
185
4 Actuation systems
Linear actuators
Magforce DSP
127
90
30
12+0,09+0,04
152
190
219
10H11
108
90
20
30
25
56
10H8
10
48
44
72
120
15
L = S + 230
Legend:
S = stroke
Type
16
Force
push
pull
N
DSP 1010
DSP 2530
DSP 3250
DSP 4550
1000
2500
3200
4500
1000
2500
3200
4500
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+230
S+230
S+230
S+230
3400 AC
3400 AC
3400 AC
3400 AC
54
54
54
54
5,5
5,5
5,5
5,5
40
15
10
5
40
15
10
5
Duty cycle 40%
Accessories
Order number

Limit switch
1028,6226
1028,0002
1028,7851
1043,0021
Ordering key
D S P
Type
Load:
1000 N
2500 N
3200 N
4500 N
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
Bronze nut, special grease for 30 C
Additional bushing (L=S+280 mm)
Protection tube made out of stainless steel
Extended shaft
ATEX zone 22 (II 3 D T 150 C)
186
1010
2530
3250
4550
100
200
300
400
500
600
01
08
09
14
122
131
Magforce SKG
220
110
140
16
40
65
42
40
16
35
95
Legend:
S = stroke
174
25
L=S+406
4
Type
Force
push
pull
N
SKG 6005*
SKG 10010**
SKG 13020**
SKG 15040**
6000
10000
13000
15000
6000
10000
13000
15000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+406
S+406
S+406
S+406
24 DC
24 DC
24 DC
24 DC
54
54
54
54
14,6
14,6
14,6
14,6
55
30
15
8
55
30
15
8
* Duty cycle 30%

** Duty cycle 10%
Ordering key
S K G
Type
Load:
6000 N
10000 N
13000 N
15000 N
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
06005
10010
13020
15040
100
200
300
400
500
600
01
187
4 Actuation systems
Linear actuators
170
130
140
114,5
16
Type
40
65
40
95
25
174
L = S + 406
Force
push
pull
N
SKD 10007*
SKD 12010**
SKD 15020**
SKD 15040**
42
62
69
16
Legend:
S = stroke
219
Magforce SKD
10000
12000
15000
15000
10000
12000
15000
15000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+406
S+406
S+406
S+406
3400 AC
3400 AC
3400 AC
3400 AC
54
54
54
54
14,6
14,6
14,6
14,6
25
21
11
5
25
21
11
5
* Duty cycle 25%

** Duty cycle 10%
Ordering key
S K D
Type
Load/Speed:
10000 N
12000 N
15000 N / 11 mm/s
15000 N / 5 mm/s
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
188
10007
12010
15020
15040
100
200
300
400
500
600
01
170
36
M18x2,5
140
114,5
40
SW30
4
16F7
0
20
95
M32x1,5 35
78
69
40
35
67
219
M32x1,5
36
18
18 H8
R2
83
M4
40
116
64,6
Magforce STW
172,5
25
L = S + 273
L = S + 290
L = S + 377
Legend:
S = stroke
Type
4
Force
push
pull
N
STW 5007*
STW 7010**
STW 10020**
STW 15040**
5000
7000
10000
15000
5000
7000
10000
15000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+273
S+273
S+273
S+273
230 AC
230 AC
230 AC
230 AC
54
54
54
54
14,6
14,6
14,6
14,6
12
8
4
2
12
8
4
2
* Duty cycle 15%

** Duty cycle 10%
Ordering key
S T W
Type
Load:
5000 N
7000 N
10000 N
15000 N
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
Limit switch
Low temperature grease
05007
07010
10020
15040
100
200
300
400
500
600
01
05
08
189
4 Actuation systems
Linear actuators
113
140
35
114,5
40
222
M18x2,5
36
16F7
SW30
297
M32x1,5
N36
18H8
18
Magforce STG
67
40
M32x1,5 35mm
95
40
65
69
N75
R20
20
L = S + 273
L = S + 290
L = S + 377
65
173,5
25
Legend:
S = stroke
Type
Force
push
pull
N
STG 10007
STG 12010
STG 15040
STG 15020
10000
12000
15000
15000
10000
12000
15000
15000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+273
S+273
S+273
S+273
24 DC
24 DC
24 DC
24 DC
54
54
54
54
14,6
14,6
14,6
14,6
14
11
3
5
14
11
3
5
Duty cycle 10%
Ordering key
S T G
Type
Load/Speed:
10000 N
12000 N
15000 N/5 mm/s
15000 N/3 mm/s
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
190
10007
12010
15020
15040
100
200
300
400
500
600
01
170
36
M18x2,5
140
114,5
40
SW30
4
16F7
0
20
95
M32x1,5 35
78
69
40
35
67
219
M32x1,5
36
18
18 H8
R2
83
M4
40
116
64,6
Magforce STD
172,5
25
L = S + 273
L = S + 290
L = S + 377
Legend:
S = stroke
Type
4
Force
push
pull
N
STD 10007*
STD 12010**
STD 15040**
STD 15020**
10000
12000
15000
15000
10000
12000
15000
15000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+273
S+273
S+273
S+273
3400 AC
3400 AC
3400 AC
3400 AC
54
54
54
54
14,6
14,6
14,6
14,6
10
7
4
2
10
7
4
2
* Duty cycle 25%

** Duty cycle 10%
Ordering key
S T D
Type
Load/Speed:
10000 N
12000 N
15000 N/4 mm/s
15000 N/2 mm/s
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
Extended shaft
Back-up nut on push
Low temperature grease
Back-up nut on push and pull
10007
12010
15020
15040
100
200
300
400
500
600
01
11
13
19
34
191
4 Actuation systems
Linear actuators
Magforce SKS/SKA
L = S + 465
65
85
61,5
19
25
302
8-15
Legend:
S = stroke
Type
Force
push
pull
N
SK(S/A) 15404
SK(S/A) 20406
SK(S/A) 25412
SK(S/A) 30423
15000
20000
25000
30000
15000
20000
25000
30000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
S+465
S+465
S+465
S+465
3400 AC
3400 AC
3400 AC
3400 AC
54
54
54
54
30
30
30
30
45
33
17
10
45
33
17
10
Duty cycle 10%
Ordering key
S K
Type
Option:
No option
With limit switches and/or potentiometer
Load:
15000 N
20000 N
25000 N
30000 N
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
192
S
A
15404
20406
25412
30423
100
200
300
400
500
600
01
Magforce SLS
200
191
60
80
100
308
381
157
30
30
65
L=S+446
90
62
110
25
80
228
Legend:
S = stroke
Type
Force
push
pull
N
SLS 18006
SLS 34013
SLS 50020
SLS 50028
SLS 50050
18000
34000
50000
50000
50000
18000
34000
50000
50000
50000
Max. speed
no load
full load
Stroke
(S)
Retr. Length
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
IP
kg
100600
100600
100600
100600
100600
S+446
S+446
S+446
S+446
S+446
3400 AC
3400 AC
3400 AC
3400 AC
3400 AC
54
54
54
54
54
40,0
40,0
40,0
40,0
40,0
70
35
23
16
9
70
35
23
16
9
Duty cycle 10%
Ordering key
S L S
Type
Load:
18 000 N
34 000 N
50 000 N
Speed at no load:
70 mm/s, only for load version 180
Stroke (S):
100 mm
200 mm
300 mm
400 mm
500 mm
600 mm
Customer options:
Standard
180
340
500
06
13
20
28
50
100
200
300
400
500
600
01
193
4 Actuation systems
Linear actuators
CALA 36A
Fig.10
CALA 36A (fig.10) is a compact 12/24 V

DC actuator, intended for industrial use.
The motor and drive spindle are connected
in-line through a planetary gear assembly.
This makes the compact design suitable
in applications where space is restricted.
A comprehensive range of suitable SKF
control systems is available.
Benefits:
600 N load capacity
12 or 24 VDC
Compact design
Corrosion-resistant design
High operating reliability
Selection of front attachments
Limit switches as accessories
Performance diagram
Technical data
Unit
Max. dynamic load:

Static load:
Speed:
Supply voltage:
Current consumption:
600N
1000N
2312mm/s
12 or 24VDC
0,5 to 4,4A (12 VDC)
0,25 to 2,2A (24 VDC)
5% at max. dynamic load
IP44
EN 50 0811
0C to+50C
0,9 to 1,4 kg
Duty factor:
Protection class:
Standard:
Temperature range:
Weight:
Type
Force
push
pull
N
CALA 36A
600
600
194
Values given at 20C

v
I
(mm/s) (A)
50
5
40
30
20
10
I (12 V)
v
I (24 V)
0
200
400
600
800
F (N)
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection class
Weight
mm/s
mm
mm
VDC
IP
kg
50200
S+215/226/257
12/24
44
0,91,4
23
12
10
22
22
G6
33
165
10
L=S+215
52
CALA 36A
25
0
30
U
L=S+257
11
6,1
M12
G5
25,9
38
G3
L=S+226
10,1
Legend:
S = stroke
20
00
3
0
28
19
00
3
0
T2
T2P
CAXC 33 limit switches
45
26
750
N.B.:
Reduces the effective stroke length by
approx. 20 mm. To be ordered separately.
More information on page 228
Ordering key
C A L A 3 6
Type
Stroke (S):
50 mm
100 mm
150 mm
200 mm
50 mm<S<200 mm
Front attachment:
Male thread, M12
Fork end, =10,1 mm
Hole, =10,0 mm
Motor voltage:
12 VDC
24 VDC
Cable:
Straight 0,25 m, no plug
Straight 1,9 m, jack plug
Straight 1,9 m, no plug
050
100
150
200
--G3
G5
G6
D12
D24
U
T2
T2P
195
4 Actuation systems
Linear actuators
MATRIX
Fig.11
The MATRIX (fig.11) series includes

powerful AC and DC actuators. They run
very quietly, take up little space and can be
installed at virtually every angle in vertical
or horizontal position.
Benefits
Long service life
Silent operation
Full system with control, operating units
and accessories
Synchronization possible
Compact and aesthetic
Back-up nut in standard
Duty cycle 1 min./9 min.
Type
Force
push
pull
N
MAX1.-A
MAX1.-B
MAX1.-C
MAX3.-A
MAX3.-B
MAX3.-C
MAX6.-A
MAX6.-B
MAX6.-C
4000
2000
1500
8000
4000
3000
8000
4000
3000
4000
2000
1500
6000
4000
3000
6000
4000
3000
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection
class***
Weight
mm/s
mm
mm
IP
kg
50700
50700
50700
50700
50700
50700
50700
50700
50700
S+195*
S+195*
S+195*
S+215**
S+215**
S+215**
S+215**
S+215**
S+215**
24 DC
24 DC
24 DC
24/12 DC
24/12 DC
24/12 DC
120/230 AC
120/230 AC
120/230 AC
66S
66S
66S
66S
66S
66S
66S
66S
66S
4,0
3,7
3,6
4,5
4,2
4,0
4,8
4,5
4,2
7
9
18
7
9
18
8
10
18
5
6
13
5
6
13
6
8
15
* If stroke < 350 mm: L=S+260 mm

** If stroke > 350 mm: L=S+280 mm
*** Protection class is valid for static conditions. For outdoor applications please contact SKF

Mains cable
Plug
Country
Order N
Straight cable 3,5 m

Coiled cable 1,2 m /2,2 m
Coiled cable 1,2 m /2,2 m
Strain relief for mains cable
Tool for plugs (Jack/D-Sub/Mains)
Operating device adaptor (D-Sub 9-pole)
Schuko
SEV
UL
Hospital grade
British standard
Schuko
SEV
SEV
Schuko
DE
CH
USA
USA
UK
DE
CH
CH
DE
ZKA-1403063500
ZKA-1403163500
ZKA-1403553500
ZKA-1403603500
ZKA-1403503500
ZKA-1403421500
ZKA-1403781200
ZKA-1404263500
ZKA-1404263500
ZUB952253
140375
140420
196
Comment
Polyurethane cable
Polyurethane cable
MAX1
Legend:
S = stroke
107
48
L=195+S
12
169
42,5
28
40
6,3
12
66
Ordering key
66
M A X 1
000
Type
Motor voltage:
24 VDC
24 VDC with integrated current cut-off
0
1
Load:
4000 N
2000 N
1500 N
4
A
B
C
Stroke (S):
50 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
550 mm
600 mm
650 mm
700 mm
050 245
100 295
150 345
200 395
250 445
300 495
350 545
400 660
450 710
500 760
550 810
600 860
650 910
700 960
Colour:
Grey
Cable/Connecting plug:
C5
Orientation of rear attachment:

No fork head (customized option)
Standard (as drawing)
Turned 90
0
1
2
Options 1:
No option, only valid for actuator A
Quick-release +EKZm, push, fork head bore parallel to button (for actuator design C is L=+115 mm)*
Quick-release +EKZm , push, fork head bore parallel to Bowden cable (for actuator design C is L=+115 mm)*
Mechanical anti-pinching protection, pull, no fixing in term. position (for actuator design A is L=+45 mm, B and C is L=+30 mm)
Mechanical anti-pinching protection, push, no fixing in term. position (for actuator design A is L=+45 mm, B and C is L=+30 mm)
Push force, for actuator version B and C
Pull force, for actuator version B and C

0
E
G
I
J
M
N
*Min. stroke: 150 mm up to 300 mm; EKZm: mechanical anti-pinching
Options 2:
No option
Single encoder, 8 pulses (not possible with electrical anti-pinching protection), jack plug
Dual encoder, DIN8 plug
Options 3:
No option
Emergency lowering, fork head bore parallel to clamping lever (for actuator design A, L+30 mm)
0
A
F
V
197
4 Actuation systems
Linear actuators
MAX3
Legend:
S = stroke
L=S+215/280
28
42,5
28
12
6,3
12
82
Ordering key
M A X 3
000
Type
Motor voltage:
24 VDC
12 VDC
0
2
Load:
8000 N
4000 N
3000 N
A
B
C
Stroke (S):
50 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
550 mm
600 mm
650 mm
700 mm
050 265
100 315
150 365
200 415
250 465
300 515
350 565
400 680
450 730
500 780
550 830
600 880
650 930
700 980
Colour:
Grey
C5

No fork head (customized option)
Turned 90
0
1
2
Options 1:
Quick-release +EKZm, push, fork head bore parallel to Bowden cable (for actuator design C is L=+115 mm)*
Electrical anti-pinching protection (safety switch device), pull
Electrical anti-pinching protection (safety switch device), push

Options 2:
No option
Single encoder, 8 pulses (not possible with electrical anti-pinching protection), jack plug
Dual encoder, DIN8 plug
Options 3:
No option
198
0
E
G
I
J
K
L
M
N
0
A
F
V
MAX6
112
50
L=S+215/280
Legend:
S = stroke
11
12
135
85
Ordering key
192,5
12
115,5
70,5
28
42,5
28
40
M A X 6
000
Type
Motor voltage:
230 VAC/50 Hz, integrated pneumatic control
120 VAC/60 Hz, integrated pneumatic control
230 VAC/50 Hz, integrated low voltage control with additional 24 V output
120 VAC/60 Hz, control +1 channel with additional 24 V output
230 VAC/50 Hz, integrated low voltage
120 VAC/60 Hz, control
Load:
8000 N
4000 N
3000 N
Stroke (S):
50 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
550 mm
600 mm
650 mm
700 mm
0
1
2
3
4
5
A
B
C
050 265
100 315
150 365
200 415
250 465
300 515
350 565
400 680
450 730
500 780
550 830
600 880
650 930
700 980
Colour:
Grey
No cable

Options 1:
Quick-release +EKZm, push, fork head bore 90 to button (for actuator design C is L=+115 mm)*
Quick-release +EKZm, push, fork head bore parallel to Bowden cable (for actuator design C is L=+115 mm)*
Quick-release +EKZm, push, fork head bore 90 to Bowden cable (for actuator design C is L=+115 mm)*
Electrical anti-pinching protection (safety switch device), pull
Electrical anti-pinching protection (safety switch device), push

0
E
F
G
H
I
J
K
L
M
N
Options 2:
No option
Options 3:
No option
0
V
199
4 Actuation systems
Linear actuators
CARE 33
Efficient design allows the CARE 33
(fig.12) actuators a high dynamic load
capacity, silent operation and low current
consumption. The gearbox is allowed to
float so that the load path passes directly
through a support bearing located in
the rear attachment. This design offers
long operational life and minimizes the
transmitted noise level. The CARE 33
actuator system offers a wide range of extra
features such as power saving, overload
protection, transformer cut-off, infrared
remote control and CAXC limit switches.
Since the motor is capable of generating

greater torque than required to produce the
rated thrust, our selected control units are
configured to ensure proper function.
Fig.12
Benefits
Silent operation
Multiple speed/load variants
Easy to adjust limit switches
Different attachment options
L=S+193
64
50
M12
38
13
* Dimension depends on
selected front attachment
54
L=S+ (150/162/193)*
59
Rear
attachement
orientation view
22
33
12
26
33
13
20
22
8,2
33
Legend:
S = stroke
E12,7
Technical data
CARE 33A
CARE 33M
CARE 33H
Max. dynamic load:

Max. static load:
Stroke length:
Speed:
Mains supply voltage:
Max. power consumption:
Duty factor:
Cable:
Connection plug:
2 000 N
6 000 N
50300 mm
812 mm/s
12 VDC or 24 VDC
12 VDC/8 A, 24VDC/3,5 A
20 % at 2 000 N
Coiled or straight, 2,0 m
DIN 8-pole
Jack plug
6 lead cable for encoder
2 lead cable
Hall-effect element
IP44 or IP65
Polyamide PA6
EN 55 014, EN 55 011
1 400 N
3 000 N
50500 mm
1622 mm/s
12 VDC or 24 VDC
12 VDC/8 A, 24 VDC/3,5 A
20 % at 1 400 N
DIN 8-pole
Jack plug
2 lead cable
Hall-effect element
IP44 or IP65
Polyamide PA6
EN 55 014, EN 55 011
800 N
3 000 N
50500 mm
3245 mm/s
12 VDC or 24 VDC
12 VDC/8 A, 24 VDC/3,5 A
20 % at 800 N
DIN 8-pole
Jack plug
2 lead cable
Hall-effect element
IP44 or IP65
Polyamide PA6
EN 55 014, EN 55 011
No connector:
Encoder:
Protection class:
Housing material:
Manufactured acc. to:
Type
Force
push
pull
N
CARE 33H
CARE 33M
CARE 33A
800
1400
2000
800
1400
2000
200
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
VDC
IP
kg
50500
50500
50300
S+150/162/193
S+150/162/193
S+150/162/193
1224
1224
1224
44/65
44/65
44/65
1,52,4
1,52,4
1,52,0
45
22
12
32
16
8
L=S+162
26
140
25
11
L=S+150
Ordering key
C A R E 3 3
Type
Load:
2 000 N
1400 N
800 N
Stroke (S):
50 mm
100 mm
150 mm
200 mm
300 mm
400 mm (not possible for CARE 33A)
500 mm (not possible for CARE 33A)
Front attachment:
Hole, =12,0 mm
Hole, =12,7 mm
Hole 10 mm, slot 6,1 mm (retracted length, L=S+162 mm)
Male thread M12 (retracted length, L=S+193 mm)
Rear attachment:
Hole, =12,0 mm
Hole, =12,7 mm
Hole, =8,0 mm
Hole, =10,0 mm
Protection class:
IP65
IP44
Feedback:
No option
Dual encoder
Cable/Connection plug:
Straight, 2,0 m, no connector
Coiled, 2,0 m, jack plug
Straight, 2,0 m, DIN 8 plug (for 2-channel encoder)
Straight, 2,0 m, jack plug
0
15 clockwise
30 clockwise
45 clockwise
60 clockwise
75 clockwise
90 clockwise
105 clockwise
120 clockwise
130 clockwise
150 clockwise
165 clockwise
Motor voltage:
24 VDC
12 VDC
Self locking feature (mandatory when selecting load/speed version H or M):
No self locking required
Self locking for pull force
Self locking for push force
A
M
H
050
100
150
200
300
400
500
1
2
3
4
1
2
3
4
1
2
0
1
1
2
3
5
000
015
030
045
060
075
090
105
120
130
150
165
24
12
0
1
2
201
4 Actuation systems
Linear actuators
IMD3 series (fig.13)
Fig.13
Features / Benefits
Ambient temperature 15C to +65C
Lubrication for longer lifetime
Extension tube (aluminium)
Protection tube (aluminium)
Zinc alloy housing
Powder metal gears
Integrated limit switches
Duty cycle 25%
Protection class IP65
ACME screw drive
Self-locking
Options
Potentiometer (10 KW/10 turns)
Thermal protector in motor
Performance diagram: (load versions; 05, 10, 20 30 and 40 - see ordering key on next page)
Speed vs Load (force)
Current vs Load (force)
Speed (mm/s)
60
12 VDC
Current (A) 12/24 VDC
5,0
12/24 VDC
50
40
4,0
05
10
20
20
10
30
40
30
40 1,8
2,0
1,2
1,0
0,6
0 100 200 300 400 500 600 700 800 900 1000
Load (N)
Force**
push
pull
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
VDC
IP
kg
50300
50300
50300
50300
50300
*
*
*
*
*
1224
1224
1224
1224
1224
65
65
65
65
65
1,5
1,5
1,5
1,5
1,5
120
240
500
750
1000
120
240
500
750
1000
57
30
16
10
8
45
24
13
8
6
* See table on below

** Max. static load is 2500 N
Dimensions in mm*
Stroke
50
100
150
200
250
300
Retracted length (L1)
158
209
260
311
362
413
Retracted length (L2)
192
243
294
345
396
447
* Tolerance: S, L1 and L2: 2,0 mm
202
20
0 100 200 300 400 500 600 700 800 900 1000
Load (N)
IMD3 05
IMD3 10
IMD3 20
IMD3 30
IMD3 40
2,4
10
3,0
30
Type
05
24 VDC
IMD3 series
L1*
42
8 11
18
38,5
20
24
18
/8,0
20,5
38,5
6,4
0
8,
4/
6,
82
20
L2*
Yellow
42
10K
CW
18
18
White
11
Purple
20
0K
Purple
98
24
White
Extend
38,5
Retract
12,5
Without potentiometer
38,5
6,4
/8,0
20,5
0
8,
4/
6,
82
20
Yellow
12,5
With potentiometer
132
Potentiometer resolution
Stroke
50
100
150
200
250
300
Ohm/mm
94,4
94,4
47,2
47,2
15,72
15,72
Ordering key
I M D 3 -
- A -
- 6 5 -
06
Type
Voltage:
12 VDC
24 VDC
Load:
120 N
240 N
500 N
750 N
1000 N
Stroke:
50 mm
100 mm
150 mm
200 mm
250 mm
300 mm
Option 1:
Potentiometer (10 kW)
None
Thermal protector
Potentiometer + Thermal protector
Protection class:
IP65
Attachments:
Hole =6,4 mm
Cable length:
600 mm
12
24
05
10
20
30
40
050
100
150
200
250
300
P
0
T
Z
65
1
06
203
4 Actuation systems
Linear actuators
ID8A series (fig.14)
Fig.14
Features / Benefits
Ambient temperature 26C to +65C
ACME screw drive
Extension tube (steel), powder coated
Protection tube (steel), powder coated
Powder coated aluminium alloy housing
Powder metal gears
Enhanced corrosion resistance
Mechanical overload protection (clutch)
Robust, designed for tough environment
Static load capacity 4500 N
Self-locking
Duty cycle 25%
Certified (CE 55011)
Options
Thermo protection
Performance diagram: (load versions; 10 and 20 - see ordering key on next page)
Speed (mm/s)
50
12 VDC
20
40
10
30
16
20
10
12
20
24 VDC
20
10
0
Type
500
Force
push
N
ID8A 10
ID8A 20
1500
2500
1000 1500 2000 2500

Load (N)
pull
1500
2500
4
2
500
1000 1500 2000 2500

Load (N)
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
VDC
IP
kg
102610
102610
*
*
1224
1224
65
65
6
6
38
20
25
13
With limit switch*
Without limit switch**
Stroke (mm)
102
153
204
305
457
610
102
153
204
305
457
610
L1 (Retracted length in mm)*
338
389
440
592
744
897
262
313
364
465
668
821
376
427
478
630
782
935
300
351
402
503
706
859
* Tolerance; S, L1 and L2: 5,0 mm (If S > 300 mm, S 7,5 mm)
** Tolerance; L1 and L2 = 3,8 mm, S = 2,5 mm
Potentiometer
Stroke
102
153
204
305
457
610
Ohm/mm
59
59
29,5
29,5
9,84
9,84
204
ID8A series
L1
76
24,5
18 (43)* 11,5
67,6
14 15,5
C0
150,5
C1
28,6
26
50,8
38
Different rear clevis mounting: C0-C5
13
13
63,5
C2
C3
55,5
With L/S switch direction:

RED (+) & BLACK (-) = extension
106
RED (-) & BLACK (+) = retraction
163,5
Limit switch*
C4
L2
76
Extend
28,6
10K
13
13
63,5
CW
26
Black
(Brown)
18 (43)* 11,5
14 15,5
38
0K
Red
(Green)
150,5
Pot:
White
Limite+Pot:
(White)
107,5
50,8
C5
Retract
24,5
White
(White)
Red
(Green)
W/O L/S switch direction:

RED (+) & BLACK (-) = retraction
95
RED (-) & BLACK (+) = extension
106
Black
(Brown)
Ordering key
I D 8
A -
- 6 5 -
13
Type
Voltage:
12 VDC
24 VDC
Load (N):
1500
2500
Stroke:
102 mm
153 mm
204 mm
305 mm
457 mm
610 mm
Option 1:
Limit switches (only for load version 20)
Option 2:
Potentiometer
Protection class:
IP65
Option 4:
Thermo protection
Orientation rear attachment:
0
30
60
90
120
150
Cable length:
130 mm
12
24
10
20
100
150
200
300
450
600
L
P
65
T
C0
C1
C2
C3
C4
C5
13
205
4 Actuation systems
Linear actuators
ID8B series (fig.15)
Fig.15
Overload protection (clutch)

Lubrication for service life
Robust, designed for tough
environment
No back driving
Duty cycle 25%
Certified (CE 55011)
Features / Benefits
Ambient temperature 26C
to +65C
High efficiency ball screw
High efficiency ball screw drive
Extension tube (stainless steel)
Protection tube (steel), powder
coated
Powder coated aluminium alloy
housing
Powder metal gears
Option
Thermo protection
Performance diagram: (load versions; 05, 10 and 20 - see ordering key on next page)
Speed (mm/s)
75
12 VDC
20
60
24 VDC
05
16
45
10
15
20
8
20
12
05
30
10
10
0
0
Type
1000 2000 3000 4000 5000

Load (N)
Force
push
pull
N
ID8B 05
ID8B 10
ID8B 20
2300
3500
4500
2300
3500
4500
1000 2000 3000 4000 5000

Load (N)
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
VDC
IP
kg
102610
102610
102610
*
*
*
12/24
12/24
12/24
65
65
65
6
6
6
65
36
22
45
22
13
With limit switch*
Stroke (mm)
102
153
204
305
457
610
102
153
204
305
457
610
378
429
480
659
811
964
302
353
404
506
735
888
416
467
518
697
849
1002
340
391
442
544
773
926
Potentiometer
Stroke
102
153
204
305
457
610
Ohm/mm
59
59
29,5
29,5
9,84
9,84
206
ID8B series
L1
24,5
76
18 (43)* 11,5
67,6
150,5
C1
13
75
C2
C3
With L/S switch direction:

55,5
C4
Red
(Green)
107,5
18 (43)* 11,5
28,6
50,8
14 15,5
13
13
63,5
10K
24,5
38
CW
White
(White)
76
26
0K
Black
(Brown)
RED (-) & BLACK (+) = retraction

L2
Extend
Red
(Green)
RED (+) & BLACK (-) = extension
106
196,5
Limit switch*
150,5
Pot:
White
Limite+Pot:
(White)
C5
Retract
28,6
13
63,5
C0
50,8
38
26
14 15,5
Black
(Brown)
95
W/O L/S switch direction:
106
RED (+) & BLACK (-) = retraction

RED (-) & BLACK (+) = extension
Ordering key
I D 8
B -
- 6 5 -
13
Type
Voltage:
12 VDC
24 VDC
Load (N):
2300
3500
4500
Stroke:
102 mm
153 mm
204 mm
305 mm
457 mm
610 mm
Option 1:
Option 2:
Potentiometer
Protection class:
IP65
Option 4:
Thermo protection
0
30
60
90
120
150
Cable length:
130 mm
12
24
05
10
20
100
150
200
300
450
600
L
P
65
T
C0
C1
C2
C3
C4
C5
13
207
4 Actuation systems
Linear actuators
IA4A series (fig.16)
Fig.16
Features / Benefits
to +65C
Thermo protector
ACME screw drive
coated
housing
Powder metal gears
Mechanical overload protection (clutch)

environment
Self-locking
Duty cycle 25%
Option
Performance diagram: (load versions; 10 and 20 - see ordering key on next page)
Speed (mm/s)
50
115 VAC
Current (A) 115/230 VAC
3,0
40
2,4
30
20
10
0
0
Type
500
Force
push
N
IA4A 10
IA4A 20
1500
2300
1500
2300
10
20
1,2
0,9
1,2
0,6
0,6
0,3
1000 1500 2000 2500

Load (N)
pull
1,5
1,8
10
20
230 VAC
500
1000 1500 2000 2500

Load (N)
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
VDC
IP
kg
102610
102610
*
*
115/230
115/230
65
65
8,5
8,5
29
16
25
14
With limit switch*
Stroke (mm)
102
153
204
305
457
610
102
153
204
305
457
610
440
440
440
592
744
897
380
415
415
465
668
821
478
478
478
630
782
935
418
453
453
503
706
859
Potentiometer
Stroke
102
153
204
305
457
610
Ohm/mm
59
59
29,5
29,5
9,84
9,84
208
IA4A series
L1
24,5
30 (55)* 11,5
70
14 15,5
C0
28,6
26
50,8
38
13
C1
13
75
87
C2
C3
35
55,5
Red
C4
304
Limit switch*
Black
Motor
White
Green
C5
Retract
Extension
Retraction 110/230 VAC
60/50 Hz
Ground
L2
76
Extend
30 (55)* 11,5
107,5
10K
28,6
CW
White
(White)
50,8
Black
(Brown)
26
0K
Red
(Green)
156
Pot:
White
Limite+Pot:
(White)
38
14 15,5
13
13
87
Red
(Green)
93
Black
(Brown)
9
309
Red
Motor
Actuator with potentiometer
Green
Black
Extension
60/50 Hz
White
Ground
Ordering key
I A 4
A -
06
Type
Voltage:
115 VAC
230 VAC
Load:
1500 N
2300 N
Stroke:
102 mm
153 mm
204 mm
305 mm
457 mm
610 mm
Option 1:
Option 2:
Potentiometer
Option 3:
Thermo protection
0
30
60
90
120
150
Cable length:
600 mm
110
230
10
20
100
150
200
300
450
600
L
P
T
C0
C1
C2
C3
C4
C5
06
209
4 Actuation systems
Linear actuators
IA4B series (fig.17)
Fig.17
Overload protection (clutch)

environment
No back driving
Duty cycle 25%
Features / Benefits
to +65C
High efficiency ball screw
Thermal protector
coated
housing
Powder metal gears
Option
Performance diagram: (load versions - see ordering key on next page)

Speed (mm/s)
75
115 VAC
Current (A) 115/230 VAC
3,0
05
2,4
60
05
45
30
10
15
20
0
0
Type
pull
N
IA4B 05
IA4B 10
IA4B 20
2300
4500
6000
2300
4500
6000
1,5
10
20
1,2
1,8
0,9
1,2
0,6
0,6
0,3
1000 2000 3000 4000 5000 6000

Load (N)
Force
push
230 VAC
1000 2000 3000 4000 5000 6000

Load (N)
Max. speed
no load
full load
Stroke
(S)
Retr. Length*
(L)
Voltage
Protection
class
Weight
mm/s
mm
mm
VDC
IP
kg
102610
102610
102610
*
*
*
115/230
115/230
115/230
65
65
65
6,0
6,0
6,0
57
29
22
46
25
13
With limit switch*
Stroke (mm)
102
153
204
305
457
610
102
153
204
305
457
610
L1 (Re tracted length in mm)*
429
429
480
659
811
964
380
404
404
506
735
888
467
467
518
697
849
1002
418
442
442
544
773
926
Potentiometer
Stroke
102
153
204
305
457
610
Ohm/mm
59
59
29,5
29,5
9,84
9,84
210
IA4B series
L1
24,5
30 (55)* 11,5
70
14 15,5
26
50,8
38
13
13
87
C1
C2
75
C3
35
55,5
Red
Limit switch*
Motor
304
C4
Green
L2
76
C5

60/50 Hz
White
Ground
30 (55)* 11,5
107,5
14 15,5
38
Extend
0K
Red
(Green)
Black
(Brown)
CW
10K
13
13
87
Pot:
White
Limite+Pot:
(White)
156
26
50,8
Retract
Extension
Black
28,6
C0
White
(White)
Red
(Green)
93
Red
309
Black
(Brown)
Ordering key
B -
Extension
60/50 Hz
White
Green
Actuator with potentiometer
I A 4
Black
Motor
Ground
06
Type
Voltage:
115 VAC
230 VAC
Load:
2300 N
4500 N
6000 N
Stroke:
102 mm
153 mm
204 mm
305 mm
457 mm
610 mm
Option 1:
Option 2:
Potentiometer
0
30
60
90
120
150
Cable length:
600 mm
110
230
05
10
20
100
150
200
300
450
600
L
P
C0
C1
C2
C3
C4
C5
06
211
4 Actuation systems
Control units
Control units
Fig.18
A large number of control units (fig.18) are

available to operate the linear drives and
telescopic pillars. They allow the connection
of up to 5 actuators or several external
options. There is also a version to operate
battery powered DC actuators.
Benefits:
Application focused system control
Operation of up to 5 actuators
Connections for foot, hand or desk
switches
Basic functions or encoder processing
versions
Control units
Type
Control
Max. motor connections
Imput
Output
V/A
BCU
4/5/8/9
Basic functions
230/120 AC
24/7
SCU
SCU1
Synchronous
22-40 DC
24/23 or 30
212
SCU5
Synchronous
120 AC
24/18
SCU9
Synchronous
230 AC
24/18
BCU
161
17
147,5
125
72
191
170
Type
Control
Input
Output
V/A
BCU 53
Basic functions
120
24/7
BCU 83
Basic functions
230
24/7
Ordering key
3 -
B C U
0 0 - 0 0
0 0
Type
Voltage:
120 VAC 50/60 Hz (Class I)
230 VAC 50 Hz (Class II)
Number of channels:
3 channels
Mains power supply cable:
Class II, straight, 3,5 m, 2-pole plug, EU (for voltage type 8)
Class II, straight, 3,5 m, 2-pole plug, UK (for voltage type 8)
Class I, straight, 3,5 m, 3-pole plug, Hospital grade (for voltage type 5)
Class I, straight, 3,5 m, 3-pole plug, UL (for voltage type 5)
Colour/Design:
Grey
Option 1:
DIN 8 motor plug and HD15 operating device plug
5
8
3
2J
2H
2N
2L
3
1
213
4 Actuation systems
Control units
Ordering key
B C P
0 0 0 -
Type
BCU parameterization
Functionality:
All channels individual
Channel 2+1
All channels simultaneously
Trendelenburg
Motors:
A
CALA36A, ECO30, ECO50
C
CARE33A, TLT10, TXG10 (EXG)
E
TFG, ECO70, ECO90, CAT33, CAT32B
M
MAX, TLG, THG
R
R20, R21, R22, MD22, MD23
Soft start/stop:
Hard, start 0 ms, stop 0 ms
Medium, start 400 ms, stop 200 ms
Soft, start 1 000 ms, stop 500 ms
Options:
None
214
11
21
30
T1
3,7 A
4,7 A
5,7 A
6,7 A
8,5 A
Actuator 1
Actuator 2
Actuator 3
0
3
6
0
0 0
Notes
215
4 Actuation systems
Control units
Connection diagram for optional external
limit switches
Single fault safe wiring requires diodes in
series to the switches. NC contacts have to
be used to stop a movement; NO contacts
are used to start movements. Switch
connection data: 50 VDC min., 100 mA min.
(eff. switching current approx. 10 mA)
13,5
Option
Battery
50,5
150
87
SCU
38
Up to 6 connections
with DIN8 plugs
5,2
340
360
410
Operating voltage display (LED)
View without protection cover
75
365
75
Fig.19
SCU (fig.19)
Legend:
1) Two connections for HD15
operating devices
2) HD15 limit switch connection
3) Additional space for mounting
4) Data plate software
5) Main connection
6) Communication interface
(optional)
7) D-Sub9 battery connection
(optional)
Pinning of HD15 limit switch

Function
Pin
Wire colour
(ZKA-160627-2500)
Switch 1
Switch 2
Switch 3
Switch 4
Common (24 VDC pulsed)
2
4
6
8
1, 3,
5, 7
9
10
11
12
13
14
15
brown/green
red/blue
violet
red
white/yellow, white/green,
grey/pink, black
blue
pink
grey
yellow
green
brown
white
Optional external power supply for binary outputs

Binary output 1 (22-40 VDC/1 A)
Binary output 2 (22-40 VDC/1 A)
GND for binary outputs
20-40 VDC, max. 50 mA
5 VDC pulsed
GND
Type
Control
Pin 2
S1
Pin 1
2,9
10
S2
Pin 3
Pin 4
11
D=20
15
S3
Pin 5
Pin 6
S4
Pin 7
Pin 8
Input
Output
V/A
SCU1
Synchronous
22/40 DC
24/23 or 30
SCU5
Synchronous
120 AC
24/18
SCU9
Synchronous
230 AC
24/18
Accessories
Plug
Order number
Mains cable, 3 pole

Mains cable, 3 pole
Mains cable, 3 pole
Mains cable, 3 pole
Mains cable, 3 pole
Schuko
SEV
UL
UK
UL hospital grade
ZKA-160637-3500
ZKA-160638-3500
ZKA-160639-3500
ZKA-160609-3050
ZKA-160640-3500
216
Ordering key
- 0
S C U
0 - 0
Type
SCU control unit
Voltage:
24 VDC (only for 6 channel version)
120 VAC, 60 Hz, class I
230 VAC, 50 Hz, class I
1
5
9
Number of channels:
3 channels
6 channels
3
6
Colour/Design:
Grey
Battery:
None (only for SCU16)
Prepared for adoption of battery
Battery (2,7 Ah) connected on the underside of the unit
1
2
3
Transformer:
None (only for SCU16)
Standard (AC version)
0
3
Ordering key
S C P
Type
SCU parameterization
Functionality:
All channels individually
Channel 2+1(+1+1+1)
Six (6) channel version 2+2+1+1
Three (3) channel version, all channels synchronously
Six (6) channel version 3+1+1+1
Six (6) channel version 4+1+1
Six (6) channel version, all channels synchronously
Trendelenburg T+1 (+1+1)
11
21
22
30
31
41
60
T1
Actuators:

C
TLT 10
4,7 A
E
TFG10
5,7 A
M
MAX, TLG, THG
6,7 A
R
R20, R21, R22
8,5 A
U
R23, R24, R25
11,7 A
Actuator 1
Actuator 2
Actuator 3
Actuator 4*
Actuator 5*
Actuator 6*
*for SCU3: insert zero
Softstart:
Hard, start 0 pulses, stop 0 pulses
Medium, start 12 pulses, stop 6 pulses
Soft, start 24 pulses, stop 12 pulses
Options:
None
0
3
6
0
The SCU solution offers many more possibilities than those given in the type keys. Please feel free to ask for more functions
like virtual limit switches, external limit switches and so on.
217
4 Actuation systems
Hand switches
Hand switches
Fig.20
The hand switches (fig.20) serve for

operating one or several actuators. With
the pushbuttons field on the front panel,
the movements of the actuators can be
controlled easily and precisely. The hand
switches are available with different plug
options. There is also an infrared version for
more flexibility in remote operating.
Benefits:
Easy and precise
Flexible and remote operation
Ergonomic design
Different plug options
Hand switches
EHA
218
Type
EHA 3
Operating power
Max. operating channels
Prot. class
VDC/mA
IP
12/50
67
Colour
grey
EHA 3
29
Type
57
40
30
Max. operating motors
Prot. class
VDC/mA
IP
12/50
67
Colour
grey
154
40
EHA 3
Operating power
32
Item
Order number
Hook with sticker
145361-0001
38 42
15 42
4
Ordering key
E H A 3
N - 0 0 0
3 M
Type
Number of channels:
1 channel
2 channels
3 channels
5 channels
1 channel with 3 memory positions (only for SCU)
2 channels with 3 memory positions (only for SCU)
3 channels with 3 memory positions (only for SCU)
Hook:
Mounted with hook
Hook supplied separately
Colour:
Grey
Plug/Cable:
Coiled cable 1,3 m/2,3 m, High Density D-Sub 15p
Symbols:
None
1 channel: 2nd row from top
Arrow up/down

Head

Foot

Level

Anti-Trendelenburg
2 channels: 1st row from top
Arrow up/down

Head/foot

Head/level

Level/head

Level/Anti-Trendelenburg
3 channels: 1st-3rd row from top Arrow up/down

Head/foot/level

Level/head/foot

Level/Anti-Trendelenburg/Head
4 channels: 1st-4th row from top Arrow up/down

Level/Anti-Trendelenburg/Head/Foot
5 channels: 1st-5th row from top Arrow up/down
Customer logo:
No
Customer-specific adaptions:
None
1
2
3
5
A
B
C
1
2
3
M
00
10
11
12
13
14
20
21
22
23
29
30
31
32
39
40
47
50
N
000
219
4 Actuation systems
Foot switches
Foot switches
Fig.21
Electrical foot switches (fig.21) serve

to operate DC actuators. The large-size
buttons enable easy and precise control
of the actuators. Depending on the plug,
the foot switches can be used on different
control units.
Benefits
Easy and precise
Flexible and remote operation
Ergonomic design
Different plug options
Foot switches
ST
220
Type
ST
Operating power
Prot. class
VDC/mA
IP
12/50
X5
Colour
blue/anthracite
ST
Type
325
Operating power
Max. operating
motors
Prot. class
VDC/mA
IP
12/50
X5
216
45
105
ST
Colour
blue/anthracite
224
192
35
40
R 100
6,7
82
105
Ordering key
S T
J 0
00
4
Type
Product group:
Standard, single-fault-safe, HD15 plug
Voltage:
Not used
Number of channels:
One (1) channel
Two (2) channels
Three (3) channels
1
2
3
Coiled cable, 2,5 m with D-sub plug
Coiled cable, 2,5 m with FCC plug
Coiled cable, 2,5 m with HD15 plug
Straight cable, 2,5 m with D-sub plug
Straight cable, 2,5 m with FCC plug
Straight cable, 2,5 m with HD15 plug
LU
LV
LW
OU
OV
OW
Colour:
Charcoal
Options:
None
000
Symbols:
Arrow up/down (on each pair of buttons), 1-3 channels
Arrow up/down, M/1, 2/3 (3 memory buttons), 3 channels
X1
37
Accessories
Item
Rubber feet (100 pcs.)
Threaded expansion inserts
Symbol sticker
Symbol sticker
Symbol sticker
Symbol
Order number
Item
Symbol
Order number
arrow up
arrow down
level up
ZBE-135310
ZBE-521122
135309-0001
135309-0002
135309-0007
Symbol sticker
Symbol sticker
Symbol sticker
Symbol sticker
Symbol sticker
level down
head up
head down
foot up
foot down
135309-0008
135309-0009
135309-0010
135309-0011
135309-0012
221
4 Actuation systems
Desk switches
Desk switches
Fig.22
The desk switches (fig.22) serve for

adjusting actuators in desks, chairs, couches
and other adjustable furniture. They
operate up to 3 actuator functions, also
with memory positions, and can easily be
fitted to furniture without compromising the
design.
Benefits:
Easy and precise
Stylish design
Different functions
Desk switches
ST
222
Type
ST
Operating power
Prot. class
VDC/mA
IP
12/50
X0
Colour
black
STA straight
STA 90
54
3,5
20
12
54
11,5
62
20
62
18
ST
64,5
107,5
96
96
20
20
3,5
104
149,5
138
138
20
Type
ST
Operating power
Prot. class
VDC/mA
IP
12/50
X0
Ordering key
20
146
Colour
black
S T
E 0
00
Type
Product group:
Standard, single-fault-safe, HD15 plug
Voltage:
Not used
Number of channels:
One (1) channel
Two (2) channels
Three (3) channels
Straight cable, 2,5 m with D-sub plug
Straight cable, 1,5 m with FCC plug
Straight cable, 2,5 m with HD15 plug
Colour:
Black
Options:
No option
Mounted on or underneath desktop, at a 90 angle
Symbols:
Up/down arrow on each pair of keys (1-3 channels)
Up/down arrow, 3 memory functions M/1, M/2, M/3 (3 channels)
E
0
1
2
3
OU
WV
OW
6
000
MAU
X1
37
223
4 Actuation systems
Spare parts
Spare parts
CAR 22 Type codes for accessories and spare parts
Item code
Type code
Limit switch for stroke = 700 mm
CAXB 40700
12 VDC-motor (flat motor)
D12B
D24B
CAXB 2250
CAXB 22100
CAXB 22150
CAXB 22200
CAXB 22300
Proximity switch for CAXB
CAXB Proximity Switch
Front mounting attachments type rod-end
57522
Front mounting attachments type clevis
57622
Rear mounting attachments type single ear bracket
58022
Rear mounting attachments type ball-joint bracket
58122

Item code
Type code
D12C
D24C
24 VDC-motor (flat motor with brake)
D24CB
24 VDC-motor (flat motor with extended shaft)
D24CS
24 VDC-motor (flat motor with low speed)
D24CW
120 VAC-motor (cylindrical motor)
E110C
120 VAC-motor (cylindrical motor with brake)
E110CB
E220C
E220CB
Capacitor value 25 F (120 VAC)
Capacitor 25 F
Capacitor 6 F
CAXB 3250
CAXB 32100
CAXB 32200
CAXB 32300
CAXB 32500
CAXB 32700
57532
57632
58032
Rear mounting attachments type Universal joint
58232
224

Item code
Type code
CAXB 40100
CAXB 40300
CAXB 40500
CAXB 40700
57540
57640
58040
Rear mounting attachments type ball-joint bracket
58140
D24D
D24DS
D24DB
E110D
E110DB
E220D
E220DB
Capacitor value 12 F (230 VAC-motor)
Capacitor 12 F
CAT 33 Type codes for accessories and spare parts

Item code
Type code
12 VDC-motor (cylindrical motor)
C12C
D12C
C24C
24 VDC-motor (cylindrical with low speed)
C24CW
D24C
D24CB
D24CS
D24CW
E110C
E110CB
E220C
E220CB
E380C
Capacitor 25 F
Capacitor 6 F
Limit switch for any stroke
CAXC33
57532
57632
58032
58232
225
4 Actuation systems
Spare parts
CAT 33H Type codes for accessories and spare parts
Item code
Type code

Limit switch for any stroke
58232
C12C
D12C
C24C
C24CW
D24C
D24CB
D24CS
D24CW
E110C
E220C
E220CB
E380C
Capacitor 6 F
CAXC33
57532
57632
58032
CAT 32B Type codes for accessories and spare parts

Item code
Type code

24 VDC-motor (flat motor with extended shaft
Limit switch for stroke = 300mm
C12C
D12C
C24C
C24CW
D24C
D24CB
D24CS
D24CW
E110C
E110CB
E220C
E220CB
E380C
Capacitor 25 F
Capacitor 6 F
CAXB 3250
CAXB 32100
CAXB 32200
CAXB 32300
CAXB 32400
CAXB 32500
CAXB 32700
57532
57632
58032
58232
226
Attachments
580-22
580-32
580-40
16
80
59
581-22
9 (x4)
55
15 (x4)
46
55
40
6,6 (x4)
11 (x4)
46
32
5,5 (x4)
40
38
28
12
22
10
32
4
59
80
581-40
582-32
16
10
28
36
22
20
13
11,5
9 (x4)
5,5 (x4)
55
40
12
6,6 (x4)
11 (x4)
575-32
12
M10 (L=15)
43
575-40
16
M12 (L=18)
M16 (L=24)
50
576-22
64
576-32
10
576-40
16
12
M10 (L=20)
M16 (L=32)
M12 (L=24)
16
12
10
40
55
80
575-22
10
80
59
46
32
59
32
46
40
48
64
227
4 Actuation systems
Spare parts
Limit switches
Fig.23
CAXC 33 limit switch

Limit switches (fig.23), combined with SKF
control units, make it possible to set the
stroke to any desired length.
Use of limit switches results in reduced
effective stroke length by 20 mm (inner
position is affected)
CAXC 33 - designed for actuator series

with 33 mm aluminium protection tube
CATR/L 33
CALA 36
CARE 33A
CARE 33M
Proximity switches - connect to control
unit according to the wiring diagram
CAT actuator series
CALA actuator series
Ordering code:
CAXC 33
Technical data
Permissible power
Max. DC voltage
Max. DC current
3W
200 V
200 mA
NB! One CAXC is needed for each limit position.
CARE actuator series

NB! Make sure you connect limit switches to a DC-supply.
Wiring diagram:
CAXB
Normally closed
Relay
26
Operating
switch
24/12 VDC
motor
Dimensions:
45
Operating
switch
Switch function:
CAXB
Relay
750
CAXB 22/32/40 limit switches
40
CAXB 32B
14
20
37
CAXB 22
CAXB 32
228
40
46
20
23
CAXB 40
48,5
25
7
Motors
37,5
40
47
D12C/D24C
D24D
E220C
37,5
40
47
58
83
47
141
42
16
7,6
71
47,6
48,5
25
7
141
70
40
9
48
25
7
R48
75
80
150
36
M (2x)
120
70
40
M5 (x4)
36
D24D/D24DB/D24DS
M5 (x4)
36
80
R48
M8 (x2)
55
E220D
D12B/D24B
48
25
70
40
9
71
185
47
16
7,6
41,6
40
52,5
65
96
3917985
36
M5 (x2)
85
M8 (x4)
150
119
85
10
4
3917985
M8 (2x)
55
229
4 Actuation systems
Glossary and definitions

AC motors
An electric motor powered by alternating
current electricity (120-400 VAC), which
requires an electrician for its connection.
Startup properties can be improved with
various accessories and different methods
of connection. There are many standard
accessories available for control and
regulation of an AC motor. An AC motor
is best suited to non-mobile products,
i.e., fixed installations, often in industrial
environments. An actuator with an AC
motor is less sensitive to load variations
and maintains virtually the same speed
regardless of load. The normal working
temperature for this type of motor is 70C.
An AC motor has few moving parts that
wear and is consequently rugged and has a
long life span.
Alignment
It is important that the product is mounted
properly from the beginning. If the
actuator is improperly installed, normal
operation may cause poor performance.
Remember, therefore, to carefully follow
the accompanying mounting instructions.
Naturally, you can turn to your supplier or
distributor whenever you have questions
about our products.
Anti-pinching (electric)
A safety device that is available on certain
SKF actuators. It shuts off the motor when
an external force is applied in the opposite
direction to the direction of travel.
Anti-pinching (mechanical)
This safety device allows the actuator to
push but not pull or pull but not push. This
feature is designed to prevent injury to
persons due to being trapped by the force
of the actuator.
Back-up nut
A nut, usually metal, of greater antishear
strength than the drive nut and which
only makes contact with the threads of the
spindle when the threads of the drive nut
fail.
DC motors
An electric motor powered by direct current
electricity (12-48 VDC) that can be run on
batteries. These motors are suitable for use
in situations where you want to be able to
230
move the product easily and do not want a

cable in the way. The speed of a DC motor
is directly proportional to the load, i.e., the
motor moves slowly under maximum load
and fastest when run with no load at all.
In many applications the actuator works
both pushing and pulling, which means that
the load works to assist in one direction
and resist in the other. Consequently,
considerable speed variations can arise.
Dynamic load
Maximal dynamic load refers to the
maximum total weight or mass the actuator
can move. Often, the decisive factor for
maximal load is the size of the motor and
the gearing employed. When an actuator
is subject to loads exceeding the maximum
stated value, the device simply stops.
Certain actuator types have an integral
mechanical safety device similar to a slipclutch, designed to protect the motor and
gears from damage. Electrical limit switches
are another alternative. These protect the
actuator from damage caused by excessive
electrical current. All such safety devices
are part of an operating system and it
is important to be aware of them when
using SKF actuators with other operating
equipments.
Duty factors
A technical term expressing how long a
motor can handle non-stop operation
before it becomes overheated or otherwise
damaged. It should be noted that Duty
Factor, whether expressed as a percentage
or time, varies depending on the working
load for the motor. The duty cycle tells
how often an actuator will be in operation
within an application and the amount of
time between operations. Because of the
power lost due to inefficiency dissipated
as heat, the actuator component with the
lowest allowable temperature usually the
motor sets the duty cycle limit for the
complete actuator. Although, there is some
heat loss from friction in the gearbox and by
ball screw and acme screw drive systems.
An example of a duty cycle calculation:
assume an actuator runs for 10 seconds
cumulatively, up and down, and then does
not run for another 40 seconds. The duty
cycle is 10(40+10), or 20%.
Emergency lowering
The emergency lowering safety feature
enables the actuator to be lowered in the
event of a power failure or malfunction. This
option is used in most medical and health
care applications.
Encoder
A rotary or linear sensor device that, when
connected to a control unit, can be used to
determine the position of an electric linear
actuator.
First failure safety
First failure safety is a control system
utilising redundant microprocessors in
which one processor monitors the functions
of the other and shuts down the system if a
malfunction in the microprocessor occurs.
Hall sensor
A sensor whose output changes based on
changes in magnetic flux. Typically used for
RPM, position, or current measurement.
IP protection
This standard describes a system for
classifying the degrees of protection
required by the enclosures of electrical
equipment. Developed by the European
Committee for Electro-technical
Standardization (CENELEC), these standards
are designed to numerically rate an
electrical product based on the level of
protection its enclosure provides.
Limit switches
A switch used to limit motion or travel in a
particular direction. Mechanical devices that
when activated open or close an electrical
contact. When the contact is closed voltage
will flow through the switch, when open no
voltage will flow through the switch. Limit
switches come in various physical sizes
and configurations and can be mounted
internally or externally.
Linear speed
Linear speed is the term used when we talk
about the distance, in millimetres, the tube
in an actuator moves linearly over a given
period of time (mm/s.), moving a load from
its starting point to a new position. The
speed can vary in different ways, depending,
for example, on the motor employed.
Actuators with direct current (DC) motors
have a speed variation directly proportional

to the load on the device. That is to say,
the larger the load, the lower the speed
and vice versa. Actuators with alternating
current (AC) motors move at a constant
speed, which is not affected by the load on
the actuator. Other factors affecting speed
include ambient temperature and how well
or poorly the actuator is integrated within
an application. An actuator integrated in
such a way that it is subject to uneven
loads wears abnormally, which results in
increased friction forces and decreased
speed.
Potentiometer
The potentiometer is a displacement
transducer. It incorporates the sensor and
transducer function into one. A typical
potentiometer consists of a uniform coil of
wire of an element of high resistance such
as carbon, platinum or conductive plastic.
This uniform coil makes up the resistive
element of the potentiometer whose
resistance is proportional to its length.
Power consumption
An expression of how much electricity
the motor uses when working. For DC
motors the power consumption is directly

proportional to the load, and for AC motors
the power consumption is constant. With
alternating current, power consumption
is low, so that simple cabling and other
inexpensive accessories suffice. Installation
is easy and the components are readily
available. With battery operation, it is often
adequate to use a small, lightweight battery
that does not require much space and is
relatively inexpensive.
Properties of ball screws
The ball screws (fig.24) incorporated in
SKF actuators are manufactured entirely
from steel and equipped with a row
of bearings located in a closed system
between the nut and screw. The design
yields extremely low friction coefficients
between the nut and the screw, because of
the rolling contact between the balls, the
nut and raceway (similar to ball bearings).
Wear is significantly reduced compared with
a sliding screw, which results in a life span
10 times longer for a ball screw under the
same working conditions. The durability
of the screw also means that it tolerates
extreme loads as well as high duty cycles.
Thanks to its low frictional resistance,
Fig.24
Fig.25
the ball screw can maintain a very low

operating temperature. As a consequence,
the ball screw is particularly well suited for
situations where it is required to operate
over long periods at high speeds. High
efficiency is one of the main characteristics
of ball screws. Thanks to this high efficiency,
it is possible to use a motor half the size
compared to a sliding screw design. This
means that, as a user, you obtain a more
economical solution. An actuator based
on a ball screw has minimal play, and
consequently its precision is significantly
higher in applications where positioning and
repetitive precision are important.
Properties of the sliding screw
Sliding screws (fig.25) are manufactured
from rolled steel and the nut is made of
plastic. This is a relatively cost effective
design with favourable properties: plastic
and metal work well together without
binding. Also, actuators incorporating sliding
screws usually offer a price advantage over
those built around other types of screws.
The sliding screw works very quietly,
which means that it is well suited for office
environments, hospitals, etc. Another
significant advantage is the high friction
coefficient in the sliding screw. This design
is particularly well suited for actuators
used in applications where they should
be self locking, i.e., will not begin moving
backwards under the weight of the load.
For instance, when using the actuator to
drive vertically adjustable tables, a sliding
screw design allows you to put heavy loads
on the surface of the table without changing
its vertical position. In short, this means
that no additional locking mechanism or
brake will be necessary to keep the actuator
in position when it is not in operation
(however, e.g., in extreme vibrating
application types additional arrangements
may be needed to prevent back driving).
Pull force
The maximum retracting force that an
electric linear actuator can produce in
Newton (N). Some SKF actuators do not
produce equal push and pull forces and
others do not permit pull force at all.
Push force
The maximum extending force that an
electric linear actuator can produce in
Newton (N). Some SKF actuators do not
produce equal push and pull forces and
others do not permit pull force at all.
231
4 Actuation systems
Retracted length
Retracted length is an expression for the
shortest distance between the two fixed
points on an actuator when the actuator is
in its innermost position. The dimensions
given reflect a measurement from the
centre of the mounting holes, which means
that the actuator requires a few millimetres
beyond the given retracted length in order
to fit. Remember that very few actuators
are symmetrical. Thus it is important to
note other dimensions as well for optimum
fit and integration of the actuator. An
actuator should always be mounted, insofar
as is possible, so that it works linearly over
its entire working range.
Self-locking
This property of the actuator means that
it will not continue to move under the
weight of the load after it has been switched
off. The self-locking ability depends on
the total efficiency of the actuator. If an
actuator is not self-locking the function
can be obtained by using a brake. On DC
motors, the motor has to be short circuited.
Self-locking load cannot, under certain
circumstances, be completely ensured
on all actuator models due to the type of
application being run (e.g., high vibration
levels)!
232
Supply voltage
Supply voltage is a measure of the voltage
supplying a system, regardless of whether it
employs AC or DC motors.
Static load (value not available in this
brochure)
Maximal static load refers to the weight
or mass that an actuator can be subjected
to when standing still without causing
permanent damage or causing the actuator
to start going backwards. Subjecting an
actuator to loads in excess of stated values
can risk permanent deformation to some
parts of the actuator.
N.B. Remember that in many applications
and installations, it is not the weight
applied directly but rather the load caused
by leverage or similar forces acting on
the actuator that are the decisive factors.
An actuator is strongest in its shortest
position and weakest in its outermost, most
extended position.
Stroke length
Describes the length in millimetres that an
electric linear actuator will extend or retract.
Most standard products are available
in increments of 50mm or 100mm.
Customer specific lengths are available,
minimum order quantities apply.
Temperature
Ambient work site temperature can be
highly significant when making a choice
between different actuators. Extreme heat
or cold can reduce the working capacity of
the equipment. If the equipment is used
in temperatures as low as about 20C,
for instance, the lubricant can harden and
impair the efficiency of the motor. If the
temperatures climb up towards 50C,
for instance, the grease can melt so that
it drains away from the screw system,
resulting in reduced or eliminated lubricant
effect, increasing the risk of overheating in
the motor.
Thermal protection
Protects drives and control units from
overheating. A device that signals when an
electrical assembly becomes too hot. The
signal usually causes the shut-off of the
electrical device.
Applications
In response to industry's ultimate need to
produce more with less, SKF has
Building automation

that provides more customer value,

or to increase overall profitability, with SKF
experience and expertise, you're likely to
find a real solution.
Welding gun
a) Electromechanical linear actuators
a) Compact electromechanical cylinder
Kitchen appliances
Working stations
a) Electromechanical linear actuators
a) Telescopic pillars
b) Desk switch
233
The highest power lies beneath

the smallest things
An ant can lift up to thirty times and
efficiency, while reducing cycle times
transport up to fifty times its own
toa minimum.
weight.
Its the power of such small things
miniature linear ball bearings,
that has inspired SKF to create
miniature ball screws, miniature slides
solutions with reduced dimensions
small units that can be placed almost
yetendowed with great potential for
anywhere, but always of thehighest
your applications.
quality which you might expect
Behind compactness and decreased

weight lies high performance which
will lead to greater precision and
234
Miniature profile rail guides,
fromSKF.
Positioning systems
General
Positioning systems are compact
and economic complete solutions.
Theassortment ranges from compact
slides without drives through to highly
dynamic, multi-axis systems with linear
motor drive. SKF offers the following
positioning systems:
Miniature slides (fig.1),
Standard slides (fig.2),
Dovetail slides (fig.3),
Compact cross tables (fig.4),
Precision slides without drive (fig.5),
Linear ball bearing slides (fig.6),
Profile rail slides (fig.7).
LZM miniature slides
With the new LZM miniature slide SKF
offers the ideal solution for linear motion
applications for short strokes and compact
boundary dimensions. The use of miniature
slides has increased in medical applications,
measurement technologies, pneumatics,
micro mechanics and micro electronics
assembly, semiconductor manufacturing
and fibre optics. The different miniature
slide components meet the highest

precision standards; LZM miniature slides
feature high running accuracy and smooth
motion. The LZM are manufactured with
all stainless steel components. Optimised
hardness enables long endurance life and
high performance within compact boundary
dimensions. The miniature slides have been
designed to ensure high system stiffness
and precision guidance. Running accuracies
of 2m over a stroke of 100mm are
attainable depending on the particular
application. Ease of installation is another
advantage of the LZM miniature slides.
Unlike cross roller systems using 4 rails and
cages to be assembled on the production
floor, the LZM slide provides a complete
slide that can simply be bolted into place
without the use of precision devices to set
preload. Every application provides new
challenges for the modern designer. SKF
will modify existing designs to meet your
specific technical requirements.
Fig.1
Very good running accuracy

Smooth running
High stiffness
Easy assembly
For dimensions, see table on page 240.
Advantages for LZM miniature slides:

Compact design
High carrying capacity

Table1
Positioning
systems

Linear motors
Roller screws
Actuation
systems
Electro-mechanical
actuators
100-1 000
Ball screws
10-100
1-10
Profile rail guides
0,1-1
Driving systems
Standard slides
Guiding systems
Operating
precision (m)
235
5 Positioning systems
General
Fig.2
GCL standard slides
RM standard slides
Slide top and base of steel. The slides

are provided with standard patterns of
mounting holes. The slide top carries tapped
holes, the base plate counterbored holes
for cylindrical screws to DIN 912. The slides
are fitted with SKF precision rail guides with
crossed roller units. Internal stops serve as
stroke limit.
Especially small design. Slide top of steel,

guidance via SKF precision rails with
double-sided centre rail and crossed roller
units. Internal stops serve as stroke limits.
GCLA standard slides

Slide top and base of black anodised
aluminium. In other respects, the design
corresponds to that of the GCL slides except
that they are lower in height.
Fig.3
Fig.4
Fig.5
SSM and SSK dovetail slides
TO and TS compact cross tables
RSM and RSK precision slides
Slide top and base of grey cast iron.

The slides are provided with standard
patterns of mounting holes. Top and base
plate both carry tapped holes. The slides
have a lead screw drive. The SSM design
has a micrometer knurl with vernier ring,
while the SSK design is fitted with a hand
crank. Both designs are fitted with a lateral
locking device.
Table top, centre and base of black

anodised aluminium with central viewing
hole. The slides are fitted with SKF precision
rail guides incorporating crossed roller units.
The TO design does not have a drive but
is provided with one lateral locking device
per axis. The TS design has a micrometer
attachment that is springloaded in one
direction. In addition, one lateral locking
device is fitted per axis.
Slide top and base of grey cast iron.

The slides are provided with standard
patterns of mounting holes. The slide
top carries tapped holes, the base plate
counterbored holes for cylindrical screws to
DIN 912. They are fitted with SKF precision
rail guides incorporating crossed roller units.
The slides have a lead screw drive.
The RSM design has a micrometer knurl
with a vernier ring, while the RSK design
isfitted with a hand crank.

236
Fig.6
LZBB and LZAB linear ball bearing

slides
The slides are fitted with SKF linear ball
bearings of ISO series 3. They are driven
via SKF rolled thread ball screws attached
on both sides. The slides are protected
bybellows. The LZBB design has a closed
housing. Shafts are attached on both sides
in shaft blocks which also incorporate the
bolt holes for attaching the slide. TheLZAB
design has an open housing. Shafts are
attached over the entire length by shaft
supports to prevent shaft deflection with
large strokes or high loads. The slide
isattached via the bolt holes in the two
shaft supports.
Fig.7
LTB profile rail slides

SKF profile rail slides are state-of-the-art
systems that offer high load-carrying
capacity and accuracy.
They are available in five sizes:
110 170 235 320 400
with two drives: ball screws or linear
motors, with three covers:
without cover with bellows with steel
cover.
For principal dimensions, see table on page 259.
For principal dimensions, see table on page 256.
Complete systems
On special demand, SKF designs and
manufactures complete systems, either
from SKF standard components or special
solutions, that are exactly tailored to the
respective application.
The different specifications are given in
table2.
237
General
Table 2
Type
Precision
Load-carrying
capacity
Miniature slides
Standard slides
Dovetail slides
Compact cross tables
Precision slides without drive
Precision slides with drive
Linear ball bearing slides
Profile rail slides
Complete systems
N.B.:
as PDF files.
Rail guide tables
238
Slide and
positioning tables
Miniature
profile rail guides
Dynamic
capabilities
Speed
Notes
239
Miniature slides
Miniature slides
LZM
Ordering key
LZM HS
Type
Carriage:
Standard
HS
Size:
17 mm
20 mm
27 mm
32 mm
7
9
12
15
Length (mm):
See table
Example:
240
LZM HS
15 165
LZM
Main dimensions for miniature slide units
5
Designations
Dimensions
W
W3
W2
L2
M1depth
d3d2h
H1
mm
LZMHS7
17
12
LZMHS9
20
15
LZMHS12
27
20
12
LZMHS15
32
25
15
20
Designations
Dimensions
L
L4
mm
M22,5
2,54,52,5
2,35
M3
15
13
M33
3,563,5
10
3,55
M4
20
15
M33,5
3,564,5
13
4,7
M4
25
M34
3,564,5
16
6,0
M4
40
Max. stroke
E
M2
L1
mm
Number of holes
Load-carrying capacities
Carriage
Rail
C0
Ma /Mb
Mc
Nm
LZMHS7
26
34
50
66
29
37
53
69
5,5
9,5
10
10,5
5
5
5
5
24
34
50
66
6
8
12
16
2
2
3
4
1000
1100
1500
1800
1700
2100
3100
4100
3,5
5,5
12
21
6
7
10
14
LZMHS9
32
42
55
81
94
35
45
58
84
97
8
11
7,5
10,5
7
9,5
8
8
8
8
28
40
54
78
92
4
6
8
12
14
2
2
3
4
5
1600
1900
2300
3000
3300
2700
3400
4300
6500
7400
7
11
18
43
57
12
15
19
29
33
LZMHS12
37
51
66
96
126
40
54
69
99
129
6
13
8
10,5
13
11
10,5
10,5
10,5
10,5
32
47
62
95
122
4
6
8
12
16
2
2
3
4
6
2500
3100
3600
4700
5700
3800
5300
6700
9700
12600
11
22
36
76
131
21
28
36
52
68
LZMHS15
52
85
105
165
56
89
109
169
6
22,5
12,5
22,5
12,5
12,5
12,5
12,5
50
80
102
162
4
8
10
16
2
2
3
4
3800
5400
6200
8400
6200
10400
12500
19500
25
73
106
264
42
70
84
131
241
No speed limit here

Can you believe that, if a human being
conventional slides have reached their
could race at a speed proportional to
limit, combine unbelievable speed with
that of a butterfly in full flight, he or
high precision.
she would reach 34000 kilometres per

hour?
Its only a hypothesis of course, but
to the fixed screw, are capable of

overcoming the critical speeds usually
enough to inspire us to create tools
associated with ball screws, and can
able to surmount practically any limit
reach a speed rating of 90000 Nd.
including that of speed.

For example, the SKF linear motor
slides, which are at their best where
242
Similarly, rotating ball nuts, thanks
With SKF, maximum speed is an

everyday norm.
Standard slides
GCL, GCLA, RM
Ordering key
Type:
Standard slide with crossed roller assemblies of steel
Standard slide with crossed roller assemblies of aluminium
Standard slide fitted with either cross roller guides or Vguided ball cages of steel
GCL
GCLA
RM
Size (see tables):

1
2
3
6
Rail length (mm) (see tables):

020 - 400
Example:
GCLA
400
243
Standard slides
J1
S/2
J5
J4
J2
J
S/2
Standard slides with crossed roller

assemblies, steel version, for manual
positioning.
J1
H1
H2
J6
GCL
J4
J3
L
Designations
Dimensions
B
Stroke
L
S11)
S21)
mm
H1
mm
H2
J1
J2
J3
J4
J5
GCL2030
GCL2045
GCL2060
GCL2075
GCL2090
GCL2105
GCL2120
40
40
40
40
40
40
40
21
21
21
21
21
21
21
35
50
65
80
95
110
125
18
30
40
50
60
70
80
46
60
75
90
105
M3
M3
M3
M3
M3
M3
M3
6,5
6,5
6,5
6,5
6,5
6,5
6,5
14
14
14
14
14
14
14
115
215
315
415
515
615
17,5
17,5
17,5
17,5
17,5
17,5
17,5
15
15
15
15
15
15
15
115
215
315
415
515
615
715
10
10
10
10
10
10
10
25
25
25
25
25
25
25
GCL3050
GCL3075
GCL3100
GCL3125
GCL3150
GCL3175
GCL3200
60
60
60
60
60
60
60
28
28
28
28
28
28
28
55
80
105
130
155
180
205
30
45
60
75
90
105
130
55
80
105
130
155
180
M4
M4
M4
M4
M4
M4
M4
9
9
9
9
9
9
9
18,5
18,5
18,5
18,5
18,5
18,5
18,5
125
225
325
425
525
625
27,5
27,5
27,5
27,5
27,5
27,5
27,5
25
25
25
25
25
25
25
125
225
325
425
525
625
725
15
15
15
15
15
15
15
39
39
39
39
39
39
39
GCL6100
GCL6150
GCL6200
GCL6250
GCL6300
GCL6400
100
100
100
100
100
100
45
45
45
45
45
45
110
160
210
260
310
410
60
95
130
165
200
280
70
120
170
220
270
370
M6
M6
M6
M6
M6
M6
13
13
13
13
13
13
31
31
31
31
31
31
150
250
350
450
650
55
55
55
55
55
55
50
50
50
50
50
50
150
250
350
450
550
750
30
30
30
30
30
30
64
64
64
64
64
64
1)
S1 Standard stroke order designation. e.g. GCL2030

S2 Extended stroke order designation. e.g. GCL2030L
244
Designations
Dimensions
J6
J7
J8
J9
mm
Fig.
n.
with S2
with S1
Weight
C0
G5
C0
kg
GCL2030
GCL2045
GCL2060
GCL2075
GCL2090
GCL2105
GCL2120
30
30
30
30
30
30
30
25
40
55
70
85
100
115
40
55
70
85
1
1
1
2
2
2
2
3,4
3,4
3,4
3,4
3,4
3,4
3,4
250
360
470
580
720
830
940
430
540
610
720
790
0,18
0,26
0,34
0,42
0,5
0,58
0,68
GCL3050
GCL3075
GCL3100
GCL3125
GCL3150
GCL3175
GCL3200
40
40
40
40
40
40
40
35
60
85
110
135
160
185
85
110
135
85
1
1
1
1
3
3
4
4,5
4,5
4,5
4,5
4,5
4,5
4,5
480
800
1040
1360
1600
1920
2080
720
880
1120
1280
1520
1680
0,57
0,8
1
1,3
1,5
1,7
2
GCL6100
GCL6150
GCL6200
GCL6250
GCL6300
GCL6400
60
60
60
60
60
60
90
140
190
240
290
390
90
140
190
290
190
1
1
3
3
3
4
6,6
6,6
6,6
6,6
6,6
6,6
2380
3740
4760
6120
7140
7820
2040
3060
4080
5100
6120
6120
3,1
4,5
5,9
7,2
8,6
11,4
245
Standard slides
GCLA
Standard slides with slide top and base
made of black anodised aluminium, for
manual positioning.
In other respects the design is similar to
that of the GCL slides except for the slightly
reduced height.
Designations
Dimensions
B
Stroke
L
S11)
S21)
mm
H1
mm
J1
J2
J3
J4
J5
GCLA2030
GCLA2045
GCLA2060
GCLA2075
GCLA2090
GCLA2105
GCLA2120
40
40
40
40
40
40
40
21
21
21
21
21
21
21
35
50
65
80
95
110
125
15
22
30
37
45
52
60
30
45
60
75
90
105
M3
M3
M3
M3
M3
M3
M3
7
7
7
7
7
7
7
115
215
315
415
515
615
17,5
17,5
17,5
17,5
17,5
17,5
17,5
15
15
15
15
15
15
15
115
215
315
415
515
615
715
10
10
10
10
10
10
10
25
25
25
25
25
25
25
GCLA3050
GCLA3075
GCLA3100
GCLA3125
GCLA3150
GCLA3175
GCLA3200
60
60
60
60
60
60
60
25
25
25
25
25
25
25
55
80
105
130
155
180
205
37
50
62
75
87
100
30
55
80
105
130
155
180
M4
M4
M4
M4
M4
M4
M4
8,25
8,25
8,25
8,25
8,25
8,25
8,25
125
225
325
425
525
625
27,5
27,5
27,5
27,5
27,5
27,5
27,5
25
25
25
25
25
25
25
125
225
325
425
525
625
725
15
15
15
15
15
15
15
41
41
41
41
41
41
41
GCLA6100
GCLA6150
GCLA6200
GCLA6250
GCLA6300
GCLA6350
GCLA6400
100
100
100
100
100
100
100
40
40
40
40
40
40
40
110
160
210
260
310
360
410
50
75
100
125
150
175
200
70
120
170
220
270
320
370
M6
M6
M6
M6
M6
M6
M6
12
12
12
12
12
12
12
150
250
350
450
550
650
55
55
55
55
55
55
55
50
50
50
50
50
50
50
150
250
350
450
550
650
750
30
30
30
30
30
30
30
65
65
65
65
65
65
65
1)
S2 Extended stroke order designation. e.g. GCL2030L
246
Designations
Dimensions
J6
J7
J8
J9
mm
Fig.
n.
with S2
with S1
Weight
C0
G5
C0
kg
GCLA2030
GCLA2045
GCLA2060
GCLA2075
GCLA2090
GCLA2105
GCLA2120
30
30
30
30
30
30
30
25
40
55
70
85
100
115
45
50
30
1
1
1
1
2
2
2
3,8
3,8
3,8
3,8
3,8
3,8
3,8
430
688
946
1204
1376
1634
1892
602
774
946
1113
1290
1376
0,1
0,14
0,19
0,23
0,28
0,32
0,37
GCLA3050
GCLA3075
GCLA3100
GCLA3125
GCLA3150
GCLA3175
GCLA3200
40
40
40
40
40
40
40
35
60
85
110
135
160
185
75
86
55
1
1
1
1
2
2
2
4,8
4,8
4,8
4,8
4,8
4,8
4,8
1496
2040
2448
2992
3536
4080
952
1224
1632
1904
2312
2584
2992
0,29
0,43
0,57
0,7
0,84
0,97
1,1
GCLA6100
GCLA6150
GCLA6200
GCLA6250
GCLA6300
GCLA6350
GCLA6400
60
60
60
60
60
60
60
90
140
190
240
290
340
390
100
80
150
200
230
80
90
1
1
2
2
2
3
3
6,8
6,8
6,8
6,8
6,8
6,8
6.8
4320
6480
8640
10800
13500
15660
17 820
3780
5400
6480
8100
9720
11340
12 420
1,6
2,4
3,1
3,9
4,7
5,4
6,2
247
Standard slides
RM
Standard slides fitted with either cross
roller rail guides or V-guided ball cages, for
manual positioning; the opposing V-rails
are screwed to a steel base plate. Slide top
and bottom carry a standard pattern of
mounting holes
Designations
Dimensions
B
Stroke
L
B1
mm
H1
mm
H2
J1
RM1020
RM1030
RM1040
RM1050
20
20
20
20
8
8
8
8
25
35
45
55
12
18
25
32
7
7
7
7
M2,5
M2,5
M2,5
M2,5
7,5
7,5
7,5
7,5
5
5
5
5
118
128
120
130
3,5
3,5
12,5
12,5
RM2060
RM2075
RM2090
30
30
30
12
12
12
65
80
95
40
50
60
12
12
12
M3
M3
M3
11,5
11,5
11,5
7
7
7
130
145
230
17,5
17,5
17,5
RM3100
RM3125
RM3150
40
40
40
16
16
16
105
130
155
60
75
90
16
16
16
M4
M4
M4
15,5
15,5
15,5
9
9
9
150
175
250
27,5
27,5
27,5
Continued
Designations
Dimensions
J2
J3
J4
J5
J6
J7
J8
J9
mm
248
Load-carrying
capacities
C0
Weight
G5
kg
RM1020
RM1030
RM1040
RM1050
14
14
14
14
110
210
310
410
7,5
7,5
7,5
7,5
27,5
210
310
410
5
7,5
7,5
7,5
118
120
128
130
3,5
7,5
8,5
12,5
12,6
12,6
12,6
12,6
208
364
464
572
0,025
0,025
0,025
0,025
RM2060
RM2075
RM2090
22
22
22
315
415
515
10,0
10,0
10,0
315
415
515
10
10
10
20,0
20,0
20,0
860
1032
1290
0,16
0,19
0,23
RM3100
RM3125
RM3150
30
30
30
325
425
525
15,0
15,0
15,0
325
425
525
15
15
15
28,5
28,5
28,5
1904
2312
2856
0,46
0,58
0,69
Slides, tables and compact cross tables

SSM/SSK, TO/TS, RSM/RSK
Ordering key
Type:
Precision slides with rail guide system, crossed rollers
Dovetail slides
Compact cross tables with rail guide system, crossed rollers
R
S
T
Versions:
Only valid for dovetail tables:
For manual operation, with micrometer knurl
For manual operation, with hand crank
Only valid for precision tables:
For manual operation, with hand crank
Only valid for compact cross tables:
For manual operation, without drive
SM
SK
SM
SK
O
S
Table width B (mm) (see tables):

50 - 300
Length L1 or dimension Sx Sy (mm):

L1 for dovetail and precision slides
Sx Sy for compact cross tables
80 - 1010
025, 050, 100
Nominal stroke S (mm) (not for compact cross tables):

See tables
Designation suffix if desired:
Slides or tables made of aluminium, black anodised
Slides with thick top: only for precision slides
Slides with thick top and Tslots: dovetail and precision slides
A
D
DT
Locking device for dovetail slides (standard)

Locking device for precision slides and tables
Locking device for compact cross tables (standard)
AR1
AR2
AR3
Example 1:
R SK
75 -
Example 2:
S SM
300 - 1010 - 500 - AR1
Example 3:
S SK
50 -
080
- 025 - AR1
Example 4:
085 -
050
080
- 025
- AR3
249
Dovetail slides
Dovetail slides
C2
L1
C1
A1
J
A2
SSM/SSK
H1
D1
SSM - with micrometer ring with spring

preloading, allowing easy turning. One
division equals 0,02 mm.
1)
L2
SSK - as SSM, but instead of knurled screw

equipped with crank handle.
2)
D1
Legend:
1) Locking device standard
2) Position grease nipple
C2
Designations
Dimensions
B
Stroke
L1
L2
Screw
A1
A2
C1
C2
D1
H1
Weight
J
mm
GG
kg
SSM50.080.025
SSK50.080.025
SSM50.130.025
SSK50.130.025
SSM50.130.050
SSK50.130.050
SSM50.155.050
SSK50.155.050
SSM50.155.075
SSK50.155.075
SSM50.180.075
SSK50.180.075
SSM50.205.100
SSK50.205.100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
80
80
130
130
130
130
155
155
155
155
180
180
205
205
50
25
25
25
50
50
50
50
75
75
75
75
100
100
25
25
25
25
50
50
50
50
75
75
75
75
100
100
37
37
37
37
37
37
37
37
37
37
37
37
37
37
42
42
42
42
42
42
42
42
42
42
42
42
42
42
19
19
19
19
19
19
19
19
19
19
19
19
19
19
6
6
6
6
6
6
6
6
6
6
6
6
6
6
31
51
31
51
31
51
31
51
31
51
31
51
31
51
23,5
47
23,5
47
23,5
47
23,5
47
23,5
47
23,5
47
23,5
47
12,3
12,3
12,3
12,3
12,3
12,3
12,3
12,3
12,3
12,3
12,3
12,3
12,3
12,3
M61
M61
M61
M61
M61
M61
M61
M61
M61
M61
M61
M61
M61
M61
37
37
37
37
37
37
37
37
37
37
37
37
37
37
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
0,7
0,7
1,2
1,2
1
1
1,3
1,3
1,2
1,2
1,4
1,4
1,7
1,7
SSM75.105.025
SSK75.105.025
SSM75.155.050
SSK75.155.050
SSM75.205.050
SSK75.205.050
SSM75.155.075
SSK75.155.075
SSM75.180.075
SSK75.180.075
SSM75.205.100
SSK75.205.100
SSM75.255.100
SSK75.255.100
SSM75.305.150
SSK75.305.150
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
105
105
155
155
205
205
155
155
180
180
205
205
255
255
305
305
75
75
100
100
150
150
75
75
100
100
100
100
150
150
150
150
25
25
50
50
50
50
75
75
75
75
100
100
100
100
150
150
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
38
54
38
54
38
54
38
54
38
54
38
54
38
54
38
54
30
47
30
47
30
47
30
47
30
47
30
47
30
47
30
47
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
1,9
1,9
2,6
2,6
3,4
3,4
2,3
2,3
2,8
2,8
3
3
3,8
3,8
4,2
4,2
Continued
250
SSM/SSK
C2
L1
(Continued)
C1
A1
H1
D1
A2
1)
L2
2)
D1
Legend:
C2
5
Designations
Dimensions
B
Stroke
L1
L2
Screw
A1
A2
C1
C2
D1
H1
Weight
J
mm
GG
kg
SSM100.160.050
SSK100.160.050
SSM100.260.050
SSK100.260.050
SSM100.210.100
SSK100.210.100
SSM100.310.100
SSK100.310.100
SSM100.310.150
SSK100.310.150
SSM100.410.150
SSK100.410.150
SSM100.410.200
SSK100.410.200
SSM100.510.200
SSK100.510.200
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
160
160
260
260
210
210
310
310
310
310
410
410
410
410
510
510
100
100
200
200
100
100
200
200
150
150
250
250
200
200
300
300
50
50
50
50
100
100
100
100
150
150
150
150
200
200
200
200
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
38
54
38
54
38
54
38
54
38
54
38
54
38
54
38
54
30
47
30
47
30
47
30
47
30
47
30
47
30
47
30
47
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
4,4
4,4
7,2
7,2
5,1
5,1
7,9
7,9
7,1
7,1
10
10
9,2
9,2
12,1
12,1
SSM150.310.100
SSK150.310.100
SSM150.510.100
SSK150.510.100
SSM150.410.200
SSK150.410.200
SSM150.610.200
SSK150.610.200
SSM150.510.300
SSK150.510.300
SSM150.710.300
SSK150.710.300
SSM150.710.400
SSK150.710.400
SSM150.810.400
SSK150.810.400
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
310
310
510
510
410
410
610
610
510
510
710
710
710
710
810
810
200
200
400
400
200
200
400
400
200
200
400
400
300
300
400
400
100
100
100
100
200
200
200
200
300
300
300
300
400
400
400
400
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
53
92
53
92
53
92
53
92
53
92
53
92
53
92
53
92
47
103
47
103
47
103
47
103
47
103
47
103
47
103
47
103
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
15,4
15,4
26
26
17,8
17,8
28,5
28,5
20,2
20,2
30,9
30,9
28
28
33,3
33,3
Continued
251
Dovetail slides
SSM/SSK
C2
L1
(Continued)
C1
A1
H1
D1
A2
1)
L2
2)
D1
Legend:
C2
Designations
Dimensions
B
Stroke
L1
L2
Screw
A1
A2
C1
C2
D1
H1
Weight
J
mm
GG
kg
SSM200.310.100
SSK200.310.100
SSM200.410.100
SSK200.410.100
SSM200.510.200
SSK200.510.200
SSM200.610.200
SSK200.610.200
SSM200.610.300
SSK200.610.300
SSM200.710.300
SSK200.710.300
SSM200.710.400
SSK200.710.400
SSM200.810.400
SSK200.810.400
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
310
310
410
410
510
510
610
610
610
610
710
710
710
710
810
810
200
200
300
300
300
300
400
400
300
300
400
400
300
300
400
400
100
100
100
100
200
200
200
200
300
300
300
300
400
400
400
400
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
53
92
53
92
53
92
53
92
53
92
53
92
53
92
53
92
47
103
47
103
47
103
47
103
47
103
47
103
47
103
47
103
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
24,7
24,7
33,2
33,2
37,2
37,2
45,7
45,7
41,1
41,1
49,6
49,6
45
45
53,5
53,5
SSM300.410.100
SSK300.410.100
SSM300.510.100
SSK300.510.100
SSM300.510.200
SSK300.510.200
SSM300.610.200
SSK300.610.200
SSM300.710.300
SSK300.710.300
SSM300.810.400
SSK300.810.400
SSM300.1010.500
SSK300.1010.500
300
300
300
300
300
300
300
300
300
300
300
300
300
300
75
75
75
75
75
75
75
75
75
75
75
75
75
75
410
410
510
510
510
510
610
610
710
710
810
810
1010
1010
300
300
400
400
300
300
400
400
400
400
400
400
500
500
100
100
100
100
200
200
200
200
300
300
400
400
500
500
55
55
55
55
55
55
55
55
55
55
55
55
55
55
74
74
74
74
74
74
74
74
74
74
74
74
74
74
20
20
20
20
20
20
20
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
10
10
10
10
10
10
80
146
80
146
80
146
80
146
80
146
80
146
80
146
66
125
66
125
66
125
66
125
66
125
66
125
66
125
34,5
34,5
34,5
34,5
34.5
34,5
34,5
34,5
34,5
34,5
34,5
34,5
34,5
34,5
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
Tr204
260
260
260
260
260
260
260
260
260
260
260
260
260
260
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
64,6
64,6
80,7
80,7
72.4
72,4
88,6
88,6
96,4
96,4
104,3
104,3
128,3
128,3
252
Compact cross tables

TO/TS
Designations
Dimensions
B
Stroke
SxSy
B1
C1
C2
C3
mm
TO085
TS085
TO160
TS160
85
85
160
160
40
40
70
70
50
25
100
50
48
48
105
105
16
16
15
15
22,5
25
33
50
22
22
50
50
4,2/84,5(4)
5/105,5(4)
J1
mm
M5
M5
M6
M6
20
20
60
60
J2
70
70
140
140
Load-carrying
capacities
C0
Weight
GA
kg
3400
4200
12400
15600
0,8
1,1
4
4,8
253
Precision slides
Precision slides
C2
L1
C1
H1
D1
RSM/RSK
Precision tables for manual operation with
micrometer knurl RSM, with hand crank RSK
D1
C2
Designations
Dimensions
B
Stroke
L1
L2
Screw
C
C1
C2
D1
H1
mm
Load-carrying
capacities
Weight
C0
GG
mm
kg
kg
RSM50.080.025
RSM50.130.025
RSM50.130.050
RSM50.130.075
RSM50.180.075
RSM50.180.100
50
50
50
50
50
50
25
25
25
25
25
25
80
130
130
130
180
180
55
105
80
55
105
80
25
25
50
75
75
100
14
14
14
14
14
14
5
5
5
5
5
5
37,5
37,5
37,5
37,5
37,5
37,5
23
23
23
23
23
23
12,3
12,3
12,3
12,3
12,3
12,3
M61
M61
M61
M61
M61
M61
37
37
37
37
37
37
M4
M4
M4
M4
M4
M4
4,5
4,5
4,5
4,5
4,5
4,5
1,7
3,3
2,5
1,7
3,3
2,5
0,7
1,1
1
0,9
1,3
1,2
RSM75.130.025
RSK75.130.025
RSM75.180.050
RSK75.180.050
RSM75.180.025
RSK75.180.025
RSM75.180.075
RSK75.180.075
RSM75.230.075
RSK75.230.075
RSM75.230.075
RSK75.230.075
RSM75.230.075
RSK75.230.075
75
75
75
75
75
75
75
75
75
75
75
75
75
75
32
32
32
32
32
32
32
32
32
32
32
32
32
32
130
130
180
180
180
180
180
180
230
230
230
230
230
230
105
105
130
130
150
150
105
105
155
155
130
130
105
105
25
25
50
50
50
50
75
75
75
75
100
100
125
125
15
15
15
15
15
15
15
15
15
15
15
15
15
15
6
6
6
6
6
6
6
6
6
6
6
6
6
6
46
88
46
88
46
88
46
88
46
88
46
88
46
88
30
71
30
71
30
71
30
71
30
71
30
71
30
71
15
15
15
15
15
15
15
15
15
15
15
15
15
15
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
62
62
62
62
62
62
62
62
62
62
62
62
62
62
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
3,4
3,4
5,1
5,1
4,25
4,25
3,4
3,4
5,1
5,1
4,25
4,25
3,4
3,4
2,2
2,2
3
3
2,8
2,8
2,6
2,6
3,4
3,4
3,3
3,3
3,1
3,1
Continued
254
RSM/RSK
(Continued)
Designations
Dimensions
B
Stroke
L1
L2
Screw
C
C1
C2
D1
H1
mm
Load-carrying
capacities
Weight
C0
GG
mm
kg
kg
RSM100.260.050
RSK100.260.050
RSM100.310.050
RSK100.310.050
RSM100.360.050
RSK100.360.050
RSM100.310.100
RSK100.310.100
RSM100.360.100
RSK100.360.100
RSM100.410.100
RSK100.410.100
RSM100.360.150
RSK100.360.150
RSM100.410.150
RSK100.410.150
RSM100.460.150
RSK100.460.150
RSM100.460.200
RSK100.460.200
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
260
260
310
310
360
360
310
310
360
360
410
410
360
360
410
410
460
460
460
460
210
210
260
260
310
310
210
210
260
260
310
310
210
210
260
260
310
310
260
260
50
50
50
50
50
50
100
100
100
100
100
100
150
150
150
150
150
150
200
200
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
46
88
46
88
46
88
46
88
46
88
46
88
46
88
46
88
46
88
46
88
30
71
30
71
30
71
30
71
30
71
30
71
30
71
30
71
30
71
30
71
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
15,5
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
M101
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
6,6
8,8
8,8
10,9
10,9
13
13
8,8
8,8
10,9
10,9
13
13
8,8
8,8
10,9
10,9
13
13
10,9
10,9
6,8
6,8
8,2
8,2
9,6
9,6
7,5
7,5
8,9
8,9
10
10
8,2
8,2
9,6
9,6
11
11
10
10
RSM150.410.100
RSK150.410.100
RSM150.510.100
RSK150.510.100
RSM150.610.100
RSK150.610.100
RSM150.510.200
RSK150.510.200
RSM150.610.200
RSK150.610.200
RSM150.710.200
RSK150.710.200
RSM150.610.300
RSK150.610.300
RSM150.710.300
RSK150.710.300
RSM150.810.300
RSK150.810.300
RSM150.810.400
RSK150.810.400
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
410
410
510
510
610
610
510
510
610
610
710
710
610
610
710
710
810
810
810
810
310
310
410
410
510
510
310
310
410
410
510
510
310
310
410
410
510
510
410
410
100
100
100
100
100
100
200
200
200
200
200
200
300
300
300
300
300
300
400
400
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
63
122
63
122
63
122
63
122
63
122
63
122
63
122
63
122
63
122
63
122
47
102
47
102
47
102
47
102
47
102
47
102
47
102
47
102
47
102
47
102
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
Tr162
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
53
53
71
71
88
88
53
53
71
71
88
88
53
53
71
71
88
88
71
71
20
20
25
25
30
30
22
22
28
28
33
33
25
25
30
30
36
36
33
33
255
Linear ball bearing table with drive

LZAB, LZBB
Ordering key
LZ
- K
Type
Design:
Open design
Closed design
AB
BB
Slide width B (mm):

See tables
Total length of slide unit L (mm):
See tables
Screw (mm) - screw lead (mm):
Screw 12 - screw lead 05
1205
1605
2005
2505
2510
Example:
256
LZ AB - 230 - 1060 - K 1205
LZBB (On request)

Linear ball bearing slides with closed housing
and ball screw
Designations
Dimensions
B
Nominal
Stroke*
L
S1
Screw data
S2
mm
nmax
d1
1/min
mm
C1
LZBB 100.336.K1205
LZBB 100.636.K1205
LZBB 100.936.K1205
LZBB 100.1236.K1205
LZBB 100.1536.K1205
100
100
100
100
100
38
38
38
38
38
336
636
936
1236
1536
120
310
495
685
875
195
495
795
1095
1395
5100
3450
1600
920
600
6
6
6
6
6
38
38
38
38
38
24
24
24
24
24
LZBB 130.340.K1605
LZBB 130.640.K1605
LZBB 130.940.K1605
LZBB 130.1240.K1605
LZBB 130.1540. K1605
LZBB 130.1840.K1605
130
130
130
130
130
130
48
48
48
48
48
48
340
640
940
1240
1540
1840
115
330
545
755
970
1185
165
465
765
1065
1365
1665
3800
3800
2150
1250
800
560
10
10
10
10
10
10
47
47
47
47
47
47
28
28
28
28
28
28
LZBB 160.410.K2005
LZBB 160.650.K2005
LZBB 160.1010.K2005
LZBB 160.1250.K2005
LZBB 160.1610.K2005
LZBB 160.1850.K2005
160
160
160
160
160
160
58
58
58
58
58
58
410
650
1010
1250
1610
1850
145
325
595
780
1050
1230
195
435
795
1035
1395
1635
3050
3050
2450
1600
960
730
12
12
12
12
12
12
55
55
55
55
55
55
36
36
36
36
36
36
LZBB 180.350.K2005
LZBB 180.650.K2005
LZBB 180.950.K2005
LZBB 180.1250.K2005
LZBB 180.1550.K2005
LZBB 180.1850.K2005
LZBB 180.2150.K2005
LZBB 180.2450.K2005
180
180
180
180
180
180
180
180
67
67
67
67
67
67
67
67
350
650
950
1250
1550
1850
2150
2450
80
300
515
740
960
1175
1400
1620
115
415
715
1015
1315
1615
1915
2215
3050
3050
2800
1600
1050
730
540
420
12
12
12
12
12
12
12
12
55
55
55
55
55
55
55
55
36
36
36
36
36
36
36
36
LZBB 230.460.K2505
LZBB 230.660.K2505
LZBB 230.1060.K2505
LZBB 230.1260.K2505
LZBB 230.1660.K2505
LZBB 230.1860.K2505
LZBB 230.2260.K2505
LZBB 230.2460.K2505
LZBB 230.2860.K2505
230
230
230
230
230
230
230
230
230
84
84
84
84
84
84
84
84
84
460
660
1060
1260
1660
1860
2260
2460
2860
120
275
580
730
1035
1185
1490
1640
1945
165
365
765
965
1365
1565
1965
2165
2565
2450
2450
2450
2050
1200
940
640
540
400
14
14
14
14
14
14
14
14
14
68
68
68
68
68
68
68
68
68
36
36
36
36
36
36
36
36
36
LZBB 230.460.K2510
LZBB 230.660.K2510
LZBB 230.1060.K2510
LZBB 230.1260.K2510
LZBB 230.1660.K2510
LZBB 230.1860.K2510
LZBB 230.2260.K2510
LZBB 230.2460.K2510
LZBB 230.2860.K2510
230
230
230
230
230
230
230
230
230
84
84
84
84
84
84
84
84
84
460
660
1060
1260
1660
1860
2260
2460
2860
120
275
580
730
1035
1185
1490
1640
1945
165
365
765
965
1365
1565
1965
2165
2565
2450
2450
2450
2050
1200
940
640
540
400
14
14
14
14
14
14
14
14
14
68
68
68
68
68
68
68
68
68
36
36
36
36
36
36
36
36
36
* Maximum stroke between end stops: S1 with bellows (standard version); S2 without bellows (special version)
257
LZAB (On request)
Linear ball bearing slides with open housing
and ball screw
Designations
Dimensions
B
Nominal
Stroke*
L
S1
Screw data
S2
mm
nmax
d1
1/min
mm
C1
LZAB 100.336.K1205
LZAB 100.636.K1205
LZAB 100.936.K1205
LZAB 100.1236.K1205
LZAB 100.1536.K1205
100
100
100
100
100
48
48
48
48
48
336
636
936
1236
1536
115
295
475
655
835
195
495
795
1095
1395
5100
3450
1600
920
600
6
6
6
6
6
38
38
38
38
38
24
24
24
24
24
LZAB 130.340.K1605
LZAB 130.640.K1605
LZAB 130.940.K1605
LZAB 130.1240.K1605
LZAB 130.1540.K1605
LZAB 130.1840.K1605
130
130
130
130
130
130
57
57
57
57
57
57
340
640
940
1240
1540
1840
110
320
530
740
950
1155
165
465
765
1065
1365
1665
3800
3800
2150
1250
800
560
10
10
10
10
10
10
47
47
47
47
47
47
28
28
28
28
28
28
LZAB 160.410.K2005
LZAB 160.650.K2005
LZAB 160.1010.K2005
LZAB 160.1250.K2005
LZAB 160.1610.K2005
LZAB 160.1850.K2005
160
160
160
160
160
160
66
66
66
66
66
66
410
650
1010
1250
1610
1850
140
320
585
765
1035
1210
195
435
795
1035
1395
1635
3050
3050
2450
1600
960
730
12
12
12
12
12
12
55
55
55
55
55
55
36
36
36
36
36
36
LZAB 180.350.K2005
LZAB 180.650.K2005
LZAB 180.950.K2005
LZAB 180.1250.K2005
LZAB 180.1550.K2005
LZAB 180.1850.K2005
LZAB 180.2150.K2005
LZAB 180.2450.K2005
180
180
180
180
180
180
180
180
77
77
77
77
77
77
77
77
350
650
950
1250
1550
1850
2150
2450
85
320
550
785
1020
1250
1485
1720
115
415
715
1015
1315
1615
1915
2215
3050
3050
2800
1600
1050
730
540
420
12
12
12
12
12
12
12
12
55
55
55
55
55
55
55
55
36
36
36
36
36
36
36
36
LZAB 230.460.K2505
LZAB 230.660.K2505
LZAB 230.1060.K2505
LZAB 230.1260.K2505
LZAB 230.1660.K2505
LZAB 230.1860.K2505
LZAB 230.2260.K2505
LZAB 230.2460.K2505
LZAB 230.2860.K2505
230
230
230
230
230
230
230
230
230
95
95
95
95
95
95
95
95
95
460
660
1060
1260
1660
1860
2260
2460
2860
120
275
580
730
1035
1185
1490
1640
1945
165
365
765
965
1365
1565
1965
2165
2565
2450
2450
2450
2050
1200
940
640
540
400
14
14
14
14
14
14
14
14
14
68
68
68
68
68
68
68
68
68
36
36
36
36
36
36
36
36
36
LZAB 230.460.K2510
LZAB 230.660.K2510
LZAB 230.1060.K2510
LZAB 230.1260.K2510
LZAB 230.1660.K2510
LZAB 230.1860.K2510
LZAB 230.2260.K2510
LZAB 230.2460.K2510
LZAB 230.2860.K2510
230
230
230
230
230
230
230
230
230
95
95
95
95
95
95
95
95
95
460
660
1060
1260
1660
1860
2260
2460
2860
120
275
580
730
1035
1185
1490
1640
1945
365
365
765
965
1365
1565
1965
2165
2565
2450
2450
2450
2050
1200
940
640
540
400
14
14
14
14
14
14
14
14
14
68
68
68
68
68
68
68
68
68
36
36
36
36
36
36
36
36
36
* Maximum stroke between end stops: S1 with bellows (standard version); S2 without bellows (special version)
258
Profile rail guide slides

LTB with screw drive
Ordering key
LTB
Type
Width of table:
Width of bottom part (see dimension specifications)
110 to 400
Length of table:
L1 length of bottom part (see dimension specifications)
150 to 2860
Driving possibilities:
No preload
No preload
Preloaded
Preloaded
SH
SX
TN
TL
Screw diameter:

12 to 40
Screw lead:

05 to 40
Covers:
Without cover
With bellows
With steel cover
D0
BL
SC
Precision class:
Low precision
Medium precision
High precision
Highest precision
P10
P5
P2
P1
Example:
LTB 235 - 0880 - TN 25 05 - BL - P2
259
Profile rail guide slides
With bellows
LTB with screw drive
With steel cover
With bellows
L2
L2
SKF profile rail slides are state-of-the-art

systems that offer high load-carrying
capacity and accuracy.
They are available in five sizes:
110 - 170 - 235 - 320 - 400
with three covers:
without cover - with bellows - with steel cover
L1
L1
ellows
With steel cover

With steel cover
L2
L2
H1
L1
L1
H2
B1
Designations Dimensions
B
B1
Stroke
H
H1
H2
L1
L2
S11)
S22)
Foz3)
Foy
4)
Mox
Moy
Moz
Screw
Pitch
Coa5)
kg
kg
mm
LTB110
110 122 40
47
41
150
950
110
20
505
30
830
17,1
8,5
0,69
0,58
0,29
12
510
3,57,1
LTB170
170 202 60
69
61
220
1600
170
35
1085
40
1420
54
27
3,1
2,5
1,2
16
516
6,412,7
LTB235
235 275 85
97
87
280
2860
235
35
2195
35
2615
97,6
48,8
7,6
6,8
3,4
25
525
11,231
LTB320
320 365 115 138 118 580
2860
350
195
2180
220
2500
121,6
60,8
13,4
13,4
6,7
32
540
20,555
LTB400
400
450
145
2135
160
2400
216
108
29,2
29,2
14,6
40
540
35,164
135
1) Maximum stroke between end stops, with bellows

2) Maximum stroke between end stops, with steel cover
3) Maximum static load per table in X and Y
4) Maximum static moments in X, Y and Z
5) Maximum static load per screw
260
620
2860
Profile rail guide slides, preferred

range
LTB110.L1.TN1205-BL-P2/V
LTB
SKF profile rail guide slides LTB of the
preferred range are a price-efficient
alternative to the in-house production.
The LTB preferred range shows 2 widths
in 3 lengths each and can be delivered in
2 working weeks. The slides are equipped
with preloaded profile rails and preloaded
ball screw, with bellows covers, end
switches and motor coupling.
170
2
15
6.5
15
L1
10
1
60
30
146
M5 (8x)
M6 (4x)
52
Km6
10
2)
70
170
146
40
40
120
6 3
41,3
40
1)
M6 (4x)
70
n x 120
L3
L3
35
235
2
20
10
41,3
156
85
Km8
40
70
205
M8 (8x)
180
120
6 2
1)
12
L1
205
146
M6 (8x)
235
25
8
M6 (4x)
70
2)
L3
Designations
L3
mm
LTB110,230,TN1205-BL-P2
LTB110,350,TN1205-BL-P2
LTB170,340,TN1605-BL-P2/V
LTB170,520,TN1605-BL-P2/V
LTB170,700,TN1605-BL-P2/V
LTB235,520,TN2505-BL-P2/V
LTB235,700,TN2505-BL-P2/V
LTB235,880,TN2505-BL-P2/V
1)
230
350
340
520
700
520
700
880
L3
Stroke1)
Dimensions
L1
n x 120
15
15
50
20
50
20
50
20
40
110
105
240
380
215
365
515
46
Weight
n
Screw data
d0
kg
mm
5
5
2
4
5
4
5
7
1,8
2,4
7,1
9,2
11,3
20
24,1
28,1
12
12
16
16
16
25
25
25
nmax
1/min
5
5
5
5
5
5
5
5
7500
7500
5620
5620
5620
3600
3600
3600
Max. stroke between limit switches
261
Integration means efficiency

Bees represent what is probably the
resulting in complete units and systems
most eloquent example of a society
incorporating a wide range ofproducts,
within the natural world. They exhibit
to meet the requirements ofeach
a primordial model of social caste
individual customer.
with subdivision of role, as well as full

control over defence, labour and even
reproduction.
Small organisational wonders of
this kind have provided inspiration
to SKF in the creation of solutions
which transcend single components,
262
With SKF, even the smallest things

become great.
Applications
Inspection machine for electronics


experience and expertise youre likely
Testing and 3D measurement machine
b) Linear motors
b) Linear motors
263
Theres no power
without performance
Most people think of the cheetah
as the fastest animal because it can
mechanical cylinders combine the
reach a speed of 100 kilometres per
features of high acceleration, speed,
hour and can accelerate up to 70 in
compact dimensions, reliability and
2 seconds. Certainly this is amazing,
longduration.
but the cheetah doesnt possess the

stamina of the gazelle which can race
at 100 kilometres per hour for several
minutes.
SKF has drawn inspiration from this
meeting of power with performance.
264
Tools like the compact electro
With SKF, your applications will run

properly for many years to come.
Customized solutions
Standard plug & play electromechanical cylinder
SKF cylinders using SKF planetary roller
screws are expanding the limits of linear
cylinders. They are designed for long
life, high acceleration and high force
applications. The cylinders use brushless
servo-motor technology, with an inline direct drive as standard. The high
performance electromechanical cylinder
consists of an SKF planetary roller screw
directly driven through a coupling by a
brushless motor. The roller screw converts
rotary motion into linear movement.
Benefits
The power of hydraulics
The velocity of pneumatics
More information is available
in publication 5338.
6
Compact electromechanical cylinder

Compact for all applications:
This product range provides high
power density in a small package.
Approximately 40% smaller than standard
electromechanical cylinders, there is the
added advantage of reduced weight. Ideal
for fixed and robot mounted applications.
Whatever the requirement, CEMC cylinders
provide a compact and dynamic solution,
maximum performance and value through
high availability, productivity and consequent
low costs through the life of the product.
Benefits
High power and reliability
Compact and dynamic solution
More information is available
in publication 5338.
265
6 Customized solutions
Complete systems forpositioning

On special demand, SKF designs and
manufactures complete systems, either
from SKF standard components or special
solutions that are exactly tailored to the
respective application.
Linear motor tables

The compact cross tables with linear
motor drive are high-precision positioning
units, equipped with ironless linear motor
and precision cross roller rail guides with
patented Anti cage creeping System (ACS).
They are available in aluminium and
cast iron and are ideally suited for wafer
processing and measurements applications.
The electrical stroke is set with optical
limit switches, integrated in the length
measurement system.
266
Notes
267
SKF the knowledge engineering

company
From the company that invented the selfaligning ball bearing more than 100 years
ago, SKF has evolved into a knowledge
engineering company that is able to draw on
five technology platforms to create unique
solutions for its customers. These platforms
include bearings, bearing units and seals, of
course, but extend to other areas including:
lubricants and lubrication systems, critical
for long bearing life in many applications;
mechatronics that combine mechanical and
electronics knowledge into systems for more
effective linear motion and sensorized solutions; and a full range of services, from design and logistics support to conditioning
monitoring and reliability systems.
Though the scope has broadened, SKF
continues to maintain the worlds leadership
in the design, manufacture and marketing of
rolling bearings, as well as complementary
products such as radial seals. SKF also holds
an increasingly important position in the
market for linear motion products, highprecision aerospace bearings, machine tool
spindles and plant maintenance services.
The SKF Group is globally certified to ISO

14001, the international standard for environmental management, as well as OHSAS
18001, the health and safety management
standard. Individual divisions have been
approved for quality certification in accordance with either ISO 9001 or ISO/TS 16949.
With some 100 manufacturing sites
worldwide and sales companies in 70 countries, SKF is a truly international corporation. In addition, our distributors and dealers
in some 15 000 locations around the world,
an e-business marketplace and a global
distribution system put SKF close to customers for the supply of both products and
services. In essence, SKF solutions are available wherever and whenever customers
need them. Overall, the SKF brand and the
corporation are stronger than ever. As the
knowledge engineering company, we stand
ready to serve you with world-class product
competencies, intellectual resources, and
the vision to help you succeed.
Airbus photo: exm company, H. Gouss
Evolving by-wire technology

SKF has a unique expertise in fast-growing bywire technology, from fly-by-wire, to drive-bywire, to work-by-wire. SKF pioneered practical flyby-wire technology and is a close working partner
with all aerospace industry leaders. As an example,
virtually all aircraft of the Airbus design use SKF
by-wire systems for cockpit flight control.
SKF is also a leader in automotive by-wire technology, and has partnered with automotive engineers to develop two concept cars, which employ
SKF mechatronics for steering and braking. Further by-wire development has led SKF to produce
an all-electric forklift truck, which uses mechatronics rather than hydraulics for all controls.
Seals
Bearings
and units
Mechatronics
268
Lubrication
systems
Services
Harnessing wind power

The growing industry of wind-generated electric power provides a source of clean, green electricity. SKF is
working closely with global industry leaders to develop efficient and trouble-free turbines, providing a
wide range of large, highly specialized bearings and condition monitoring systems to extend equipment life
of wind farms located in even the most remote and inhospitable environments.
Working in extreme environments

In frigid winters, especially in northern countries, extreme sub-zero temperatures can cause bearings in
railway axleboxes to seize due to lubrication starvation. SKF created a new family of synthetic lubricants
formulated to retain their lubrication viscosity even at these extreme temperatures. SKF knowledge enables manufacturers and end user customers to overcome the performance issues resulting from extreme
temperatures, whether hot or cold. For example, SKF products are at work in diverse environments such
as baking ovens and instant freezing in food processing plants.
Developing a cleaner cleaner

The electric motor and its bearings are the heart of many household appliances. SKF works closely with
appliance manufacturers to improve their products performance, cut costs, reduce weight, and reduce
energy consumption. A recent example of this cooperation is a new generation of vacuum cleaners with
substantially more suction. SKF knowledge in the area of small bearing technology
is also applied to manufacturers of power tools and office equipment.
Maintaining a 350 km/h R&D lab

In addition to SKFs renowned research and development facilities in Europe and the United States, Formula One car racing provides a unique environment for SKF to push the limits of bearing technology. For
over 50 years, SKF products, engineering and knowledge have helped make Scuderia Ferrari a formidable
force in F1 racing. (The average racing Ferrari utilizes more than 150 SKF components.) Lessons learned
here are applied to the products we provide to automakers and the aftermarket worldwide.
Delivering Asset Efficiency Optimization

Through SKF Reliability Systems, SKF provides a comprehensive range of asset efficiency products and
services, from condition monitoring hardware and software to maintenance strategies, engineering assistance and machine reliability programmes. To optimize efficiency and boost productivity, some industrial facilities opt for an Integrated Maintenance Solution, in which SKF delivers all services under one
fixed-fee, performance-based contract.
Planning for sustainable growth

By their very nature, bearings make a positive contribution to the natural en-vironment, enabling machinery to operate more efficiently, consume less power, and require less lubrication. By raising the performance bar for our own products, SKF is enabling a new generation of high-efficiency products and
equipment. With an eye to the future and the world we will leave to our children, the SKF Group policy on
environment, health and safety, as well as the manufacturing techniques, are planned and implemented
to help protect and preserve the earths limited natural resources. We remain committed to sustainable,
environmentally responsible growth.
269
Notes
270
Notes
271
Notes
272
Notes
273
Notes
274
SKF is a registered trademark of the SKF Group

Turcite-B is a registered trademark of Busak & Shamban GmbH
SKF Group 2008
The contents of this publication are the copyright of thepublisher and
may not be reproduced (even extracts) unless permission is granted.
Every care has been taken to ensure the accuracy of the information
contained in this publication but no liability can be accepted for any
loss or damage whether direct, indirect or consequential arising out
of the use of the information contained herein.
Publication 4664/6 EN July 2008
This publication supersedes publication 4664/5.
Printed in Italy on environmentally friendly paper.

4664-6 en PDF

Uploaded by

Copyright:

Available Formats

4664-6 en PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4664-6 en PDF

Uploaded by

Copyright:

Available Formats

Linear motion

The SKF brand now stands for more

While SKF maintains its leadership

These solutions encompass ways to

LEASTandem shaft blocks, closed type

Profile rail guides

LWRE 2211Precision rail guides

105 Ball and roller screws

128 Precision ground screw (inches

138 Planetary roller screws

Recirculating roller screws

161 About actuation systems

218 Hand switches

224 Spare parts

265 Standard plug & play

230 Glossary and definitions

SKF The knowledge

Complete systems for positioning. . . . . . . . . . . . . . . . . . . . . . . . 266

General (positioning systems). . . . . . . . . . . . . . . . . . . . . . . . . . . 235

Service range, ground ball screws (Europe only). . . . . . . . . . . . 124

Mechatronics is the science of bringing

How to get more information

On-line product selection

PDF catalogues download

Discover our wide range of high precision

CAD files of our products can be accessed

In addition to this publication we have

Linear bearings and units

About this publication

After the type of product has been

Selection design type for

Selection value nominal

In the ordering key, the options are set out

Other option both

ball bearings which are capable of

worlds smallest bird, but it is also the

accommodating loads with the greatest

most stable, thanks to the incredible

speed of its wings (eighty pulsations

The potential derived from such

Linear ball bearings (fig.1), profile rail

Operating precision (table1)

Standard drives or linear motors

Linear ball bearings

Profile rail guides

Precision rail guides

Linear ball bearings (fig.5, 6 and 7) are

linear ball bearings without factory pre-lubrication

Linear ball bearings

Linear plain bearings

Linear bearings and units

Linear bearing units

Shafts and shaft supports

Quadro supported shaft

* Automatic compensation of shaft misalignments of up to max. 30 angular minutes

Linear ball bearings/Linear bearing units

Design (for seals on side see table at end page):

Only valid for LBBR:

Basic load ratings

linear ball bearings without factory pre-lubrication