M12 Catalogue

®
Exhibit Systems
M12 System
Component Catalogue, Price List 2006
R
2
Inhaltsverzeichnis
Seite / Page
Table of Contents
General notes 4
Standard Nodes M12 5
Special Nodes M12, Steel 6-8
Tubes 22 and 30 M12 9
Length of Tubes 10
Tubes 22 and 30 M12 ST 11
Tubes 1/4 K 22 mm ST 11
Tubes 22 and 30 M12 AL 12
Slotted Tubes 22 and 30 M12, Steel 13
Accessories for Slotted tubes 14-15
Accessories 16-31
Girders 22 M12 32-33
Accessories for Girders 22 M12 34-35
Doors 36
Tools 36
Aluminium Dome 30 M12 37-40
Biomorphic structures 41-44
General Terms of Sale and Delivery 45-47
Publication for planners and users of MERO-TSK

Exhibit Systems.
Edition 2006
All rights, including those of the translation, of reprints
in whole or in part, of photomechanical reproduction
and other copies, require written permission.
© MERO-TSK International GmbH & Co. KG

Exhibit Systems
We reserve the right to modify prices, construction,

materials and dimensions. We assume no liability for
values and measurements given in this publication,
particularly in illustrations, drawings, plans, calcu-
lations and tables, unless they have been explicitly
declared binding in writing.
3
Notes
General Technical Notes:
This application-orientated documentation

”Construction System M12 – System and
Function“ is intended for specialist users who
are familiar with the rules of engineering, the
relevant standards and safety regulations and,
in particular, with the guidelines and regula-
tions of fair and exhibition construction.
Spaceframe structures consisting of M12 System components

do not comply with the structural rules or static computations of
the structural MERO Spaceframe Technical Documentation.
Abbreviations used:
AL aluminium
KF plastic
ST steel
A2 high-grade steel
glvz gal. anodized
pc powder coated according RAL
The Price Unit (PU) refers to the number of items in a packing unit.
Price Schedule for Special Lengths:
Tubes M12
Tubes ST/AL up to 49 pcs., price next length + 6,00 EUR
Girders 22M12
DUO up to 24 pcs., price next length + 16,00 EUR
TRIO up to 18 pcs., price next length + 22,00 EUR
QUADRO up to 12 pcs., price next length + 30,00 EUR
For larger quantities: price next length without extra charge
Aluminium Domes
Prices for in-between sizes: next dome diameter.
Price for segments, cladding and bottom plates available on
request.
For orders smaller than 250,- EUR (list price), an order Limit
charge of 25,- EUR net will apply.
Valid from June 1st, 2006
With this Publication, this price list replaces all previous price
lists published.
The prices quoted are in EUR and are valid ex works as

per INCOTERMS, exclusive of VAT or other taxes. Standard
packing included. Our General Terms of Sale and Delivery
apply.
Sold only in packing units. (PU)
4
Standard Nodes M12
Standard Node M12,

with 18 tap holes, angles between tap hole faces 45°, 60°, 90°,120°,135°, 180°.
Face to face diameter 46 mm. Materials: steel, aluminum.
Standard Nodes
For the design and assembly of all regular modules and standardized spaceframes
only standard nodes are needed. This standard node is also used for the various connection
angles of frame girders. Only few exceptions need special nodes (pages 6-8).
Steel Nodes M12

are chrome-plated or powder coated.
Aluminium Nodes M12

are delivered powder coated and anodized E6/EV1.
Colours may vary slightly.

Special colours available on request.
Norm-Knoten M12, PGR kgs

Standard Nodes M12 Description Price PU
20054000 41 1 0,235
Standard node 49,5/46 M12 ST*chrome
46
20055000 41 1 0,235
Standard node 49,5/46 M12 ST*p.c.
20168000 41 1 0,080
Standard node 49,5/46 M12 AL*p.c.
20169000 41 1 0,080
Standard node 49,5/46 M12 AL*E6/EV1
M12
5
PGR kgs
Special Nodes M12, Steel Description Price PU
20057000 41 1 0,230
M12 Mast node 49,5/46 M12 ST*chrome
20058000 41 1 0,230
Mast node 49,5/46 M12 ST*p.c.
with 18 tap holes. Referring to the vertical main axis the

two opposite diagonal tap hole rows (4 tap holes) are
rotated by 45°. This node is necessary if surface
diagonals and space diagonals have to be connected
to one node.
46
20061000 41 1 0,270
Triangle node 49,5/46 M12 ST*chrome
M12
20062000 41 1 0,270
Triangle node 49,5/46 M12 ST*p.c.
with 14 tap holes. The two vertical tap holes on both

sides allow in a space frame structure with triangular
module and reduced construction depth the
connection of vertical supports or suspensions
on both sides.
46
50419700 41 1 0,220
Half node M12 ST*chrome
50419800 41 1 0,220
Half node M12 ST*p.c.
23
34
with 13 tap holes. Because of its larger contact surface

the half node can be positioned more easily and provides
a safe and simple assembly of the spaceframe.
A gap-free cladding of the M12 structure is possible
M12
since node surface and tube form a plane.
6
PGR kgs
20064000 41 1 0,265
M12 Milan node 49,5/46 M12 ST*chrome
20063000 41 1 0,265
Milan node 49,5/46 M12 ST*p.c.
with 14 tap holes. A diagonal tap hole row with flat

angles creates the flat version of the half-octahedron
spaceframe type ”Milan“. The two diagonal tap hole rows
are turned at 45° to each other in order to allow the con-
nection of space diagonal and surface diagonal on one
46 node (like ”mast“ node). The use of a surface diagonal in
the horizontal position is not possible.
21400000 41 1 0,270
Vario node 49,5/46 M12 ST*chrome
21402000 41 1 0,270
23 Vario node 49,5/46 M12 ST*p.c.
with 5 tap holes, 3 of which have variable angles around

the equator line. The minimum horizontal plane angle
is 60°.
2
M1
Ø46
20065000 41 1 0,080
Cube node 33,0/28 M12 ST*chrome
20066000 41 1 0,080
Cube node 33,0/28 M12 ST*p.c.
28
with 6 tap holes, connecting an angle of

90°, 28 mm dia. between tap hole faces.
M12
If used with standard tubes, the system
dimension is reduced by 18 mm.
7
l PGR Preis PE kgs
20070000 41 1 0,150
Ø46 Ring Node 45° 22 M12 ST*chrome
20071000 41 1 0,150
Ø23 Ring Node 45° 22 M12 ST*painted
M12
height 22 mm, 8 tap holes on the perimeter.

Connecting angle 45°, height adjustable on the tube by
means of set-screw M12.
Only for tubes of 22 mm dia., complete with set-screw.
22 Fitted using allen screwdriver SW6
M12
20076000 41 1 0,110
Ring Node 45° 30 M12 ST*chrome
Ø46
20077000 41 1 0,110
Ø31
Ring Node 45° 30 M12 ST*painted
M12
height 22 mm, 8 tap holes on the perimeter.

Connecting angle 45°, height adjustable on the tube by
means of set-screw M12.
Only for tubes of 30 mm dia., complete with set-screw.
22 Fitted using allen screwdriver SW6
M12
20078000 41 1 0,130
Ring Node 45° 22 M12 ST*open chrome
Ø46
20079000 41 1 0,130
Ring Node 45° 22 M12 ST*open painted
Ø23
M12
height 22 mm, 5 tap holes on the perimeter angled 45°.

For application after installation of tube the disc-type
node is slipped over sleeve to position on a tube and
fixed by set-screw. Application only for tubes 22 mm dia.
Complete with set-screw.
22
Fitted using allen screwdriver SW6
M12
8
Tubes 22 and 30 M12
M12 M12
M12
28
28
28
bei Verwendung von Normknoten

bei Verwendung von Normknoten
L3 = abhängig vom verwendeten

L3 = L1-102 mm
L3 = L1-102 mm
L3 = dependent on node type

use of standard nodes
L1
Kontentyp und Rastermaß

use of standard nodes
L1
L3
and module size
Ø 22x1
Ø 30x1,5
Ø 22x1
Tubes 22 M12, Tubes 30 M12,

22 mm tube diameter. 30 mm tube diameter.
Materials: steel and aluminium. Materials: steel and aluminium. Round Sleeve Tube 22 M12,
to be used with cube nodes (p. 7) and e.g.
All steel tubes 22 M12 and 30 M12 the glass corner clamp (p. 24), particularly
will be supplied chromed or powder for the construction of furniture.
coated. Available on request!
All aluminium tubes 22 M12 and 30 M12

will be supplied powder coated or anodized E6/EV1.
9
Length of Tubes
00
20
2828
51
20
1414
00
Ø22
x1
R1
0
25
25
-5
0
1414 353 1
50
353
0
51
707
10
00
00
10
R1
0
50
Tubes 1/4K 22 mm ST R1 System radius

707
The length of the MERO tubes in a geometric progression by factor 2. It is described as system dimension L1 and is
measured from node axis to node axis. By adding the same tube lengths, an exact module dimension is achieved.
The next largest tube length is always equal to the length of the side opposite the right angle of the preceding
right-angled triangle in a row of right-angled triangles.
10
Tubes 22 and 30 M12 ST Description Finish Price PU
20081000 Tube 250mm 22x1,0 M12 ST chrome 41 1 0,250

20082000 Tube 250mm 22x1,0 M12 ST p.c. 41 1 0,250
20133000 Tube 250mm 30x1,5 M12 ST p.c. 41 1 0,360
20085000 Tube 353mm 22x1,0 M12 ST p.c. 41 1 0,305
20135000 Tube 353mm 30x1,5 M12 ST p.c. 41 1 0,470
20088000 Tube 500mm 22x1,0 M12 ST p.c. 41 1 0,375
20137000 Tube 500mm 30x1,5 M12 ST p.c. 41 1 0,605
20091000 Tube 707mm 22x1,0 M12 ST p.c. 41 1 0,480
20139000 Tube 707mm 30x1,5 M12 ST p.c. 41 1 0,814
20093000 Tube 791mm 22x1,0 M12 ST*) chrome 41 1 0,520
20094000 Tube 791mm 22x1,0 M12 ST*) p.c. 41 1 0,520
20140000 Tube 791mm 30x1,5 M12 ST*) chrome 41 1 0,895
20141000 Tube 791mm 30x1,5 M12 ST*) p.c. 41 1 0,895
20097000 Tube 1000mm 22x1,0 M12 ST p.c. 41 1 0,625
20143000 Tube 1000mm 30x1,5 M12 ST p.c. 41 1 1,115
20101000 Tube 1414mm 22x1,0 M12 ST p.c. 41 1 0,820
20145000 Tube 1414mm 30x1,5 M12 ST p.c. 41 1 1,520
20104000 Tube 2000mm 22x1,0 M12 ST p.c. 41 1 1,960
20147000 Tube 2000mm 30x1,5 M12 ST p.c. 41 1 2,140
20126000 Tube 1/4K 500mm 22x 1,0M12 ST chrome 41 1 0,850
Tubes 1/4K 22 mm ST
20127000 Tube 1/4K 500mm 22x 1,0M12 ST p.c. 41 1 0,850
50186000 Tube 1/4K 707mm 22x 1,0M12 ST chrome 41 1 1,200
20129000 Tube 1/4K 707mm 22x1,0 M12 ST p.c. 41 1 1,200
20130000 Tube 1/4K 1000mm 22x1,0 M12 ST chrome 41 1 1,600
20131000 Tube 1/4K 1000mm 22x1,0 M12 ST p.c. 41 1 1,600
*) Space diagonal of the spaceframe type ”Milan“ 1 m module.
Other lengths for standard tubes 22 and 30 M12 e.g. module size 0.990 m, may be supplied on order.
11
Tubes 22 and 30 M12 AL Description Finish Price PU
20018000 Tube 250mm 22x1,0 M12 AL anod.E6/EV1 41 1 0,185

20179000 Tube 250mm 22x1,0 M12 AL p.c. 41 1 0,185
20203000 Tube 250mm 30x1,5 M12 AL p.c. 41 1 0,210
20182000 Tube 353mm 22x1,0 M12 AL p.c. 41 1 0,205
20206000 Tube 353mm 30x1,5 M12 AL p.c. 41 1 0,250
20185000 Tube 500mm 22x1,0 M12 AL p.c. 41 1 0,270
20209000 Tube 500mm 30x1,5 M12 AL p.c. 41 1 0,300
20188000 Tube 707mm 22x1,0 M12 AL p.c. 41 1 0,265
20212000 Tube 707mm 30x1,5 M12 AL p.c. 41 1 0,380
20192000 Tube 791mm 22x1,0 M12 AL*) anod.E6/EV1 41 1 0,275
20191000 Tube 791mm 22x1,0 M12 AL*) p.c. 41 1 0,275
20216000 Tube 791mm 30x1,5 M12 AL*) anod.E6/EV1 41 1 0,410
20215000 Tube 791mm 30x1,5 M12 AL*) p.c. 41 1 0,410
20194000 Tube 1000mm 22x1,0 M12 AL p.c. 41 1 0,315
20218000 Tube 1000mm 30x1,5 M12 AL p.c. 41 1 0,480
20197000 Tube 1414mm 22x1,0 M12 AL p.c. 41 1 0,387
20221000 Tube 1414mm 30x1,5 M12 AL p.c. 41 1 0,630
20200000 Tube 2000mm 22x1,0 M12 AL p.c. 41 1 0,500
20224000 Tube 2000mm 30x1,5 M12 AL p.c. 41 1 0,850
*) Space diagonal of the spaceframe type ”Milan“ 1 m module.
Other lengths for standard tubes 22 and 30 M12 e.g. module size 0.990 m, may be supplied on order.
12
Slotted Tubes 22 and 30 M12, Steel
62.5
87.5
25
25
3.2
3.5
L1
L1
Slotted Tubes
25
They have four rows of slots around the
circumference, spaced 90°, to carry
25
25 25
slotted tube accessories.
For further additions refer to standard
87.5
tubes M12 and standard accessories.
62.5
Slotted tubes can be supplied chromed

and powder coated.
PGR kgs
Slotted Tubes 22 and 30 M12, Steel Description Price PU
20624000 41 1 0,538
Slotted tube 500mm 22x2,0 M12 ST*chrome
20644000 41 1 0,731
20626000 41 1 0,785
20646000 41 1 1,000
20628000 41 1 1,000
20648000 41 1 1,381
20630000 41 1 1,361
20650000 41 1 1,919
20632000 Schlitzstab 2000mm 22x2,0 M12 ST*chrom 41 1 1,888
20652000 Schlitzstab 2000mm 30x2,0 M12 ST*chrome 41 1 2,681
13
Zubehör für Schlitzstäbe ID Bezeichnung PGR Preis PE kgs
Accessories for Slotted tubes Description Price PU
20753000 Konsole 300mm ST*chrom 41 1 0,230

Bracket 300mm ST*chrome
20408000 Konsole 300mm ST*lack. 41 1 0,250
Bracket 300mm ST*p.c.
waagerechter Einsatz
35
322
279
und 15° Neigungswinkel möglich
50 14
Ø5.5 Ø5.5
t=2.5 used in horizontal position
70
or with an angle of 15°

15°
20754000 Konsolenwinkel 300mm ST*chrom 41 1 0,182

20 Support for bracket 300mm ST*chrome
2
20409000 Konsolenwinkel 300mm ST*lack. 41 1 0,180

Support for bracket 300mm ST*p.c.
20
Ø7,5 für Konsole 300 mm, mit Befestigungsmaterial

2
for bracket 300 mm, with fixing material
305
20 20
Ø7,5 Ø7,5
7
Ø5,5 Ø5,5
8 279 8
20756000 Zwischenrohr 1000mm ST*chrom 41 1 0,620

Connecting rod 1000mm ST*chrome
20411000 Zwischenrohr 1000mm ST*lack. 41 1 0,620
Connecting rod 1000mm ST*p.c.
zur Herstellung von Tablarträgern mit Konsolen 300 mm

m 1000 Ø10 oder Schrägkonsolen 30°
Syste
to make shelf frames in conjunction with brackets 300 mm
or inclined brackets 30°
M5
20755000 Schrägkonsole 30° ST*chrom 41 1 0,268

23 Inclined bracket 30° ST*chrome
Ø5.5
10
2041000 Schrägkonsole 30° ST*lack. 41 1 0,270

8 Inclined bracket 30° ST*p.c.
50
129
30°
zur Herstellung von
50
Tablarträgern mit 30° Neigung

28 4
26
2
to make shelf frames with

an angle of 30°
Ø
5.
5
155
17
14
kgs
Accessories for Slottet tubes Description Price PU
20760000 41 1 2,290
Shelf 1000mm acrylic*clear
for inclined bracket

32
0
50
20766000 41 1 0,041
12.5
Ø22 Bracket w. thread 22M12 ST*chrome

M12
23
20419000 41 1 0,050
Bracket w. thread 22M12 ST*p.c.
20767000 41 1 0,065
37.5
Bracket w. thread 30M12 ST*chrom

20422000 41 1 0,065
108
M12 Bracket w. thread 30M12 ST*p.c.

50
for standard tubes in standard lengths

8
20772000 41 100 0,002

Glass shelf rest PVC*transparent
Ø16
15
kgs
Accessories Description Price PU
M12 20368000 41 10 0,070

45 Adjustable foot D50x8mm M12 ST*chrome
66.5
50 mm Ø, used as base and top plate or spacer to the wall.

Length of threaded bolt 45 mm.
(Fitted using wrench SW19.5)
Ø50
20369000 41 10 0,120
Foot plate D50x8mm M12 ST*chrome
M12
20370000 41 1 0,120
Foot plate D50x8mm M12 ST*p.c.
17
8
Ø50
50 mm Ø, used as base and top plate or spacer to the
wall. Length of threaded bolt 17 mm.
20371000 41 1 0,200
M12
Adjust.foot D50 80-110mm M12 ST*chrome
80 - 110
50 mm Ø, used as base and top plate.

Adjustable height 80 mm to 110 mm.
Ø50
20372000 41 1 0,470
Foot plate D100x8mm M12 ST*galv.
M12
20373000 41 1 0,470
Foot plate D100x8mm M12 ST*p.c.
17
8
Ø13 Ø13
100 mm Ø, for fixing space frame structures to the floor.
Ø100
M12 20658000 41 1 0,111

Castor wheel M12 KF*black
50 mm Ø, height 64 mm, carrying capacity 50 Kg.

64
(Fitted using wrench SW17)
Ø50
21786000 41 1 2,700
Footplate M12 L500 ST*chrome
Ø23
21785000 41 1 2,700
Footplate M12 L500 ST*p.c.
67
M12
50
for free-standing single walls, information

500 boards etc. Connection for tube 22M12.
16
kgs
20676000 41 10 0,005
M12 Slotted set screw M12/M6x10*galv.
10
for wall or ceiling attachement of the construction onto the

node by means of dowel (wall anchor).
M6
M12 20667000 41 10 0,016

M6 Threaded bolt w. hook ST*galv.
12
for attachment or suspension of decoration onto the node.

38
Ø25
10623000 41 1 0,040
Eye bolt M12x35mm special*galv.
für die Abhängung von Raumfachwerken.

Ø12
47.5
for the suspension of space frames.

20
M12
20669000 41 10 0,045
M12
Connecting piece M12/M12 pivot.*galv.
15
for connection of two nodes on preassembled spaceframe

parts. (Fitted using wrench SW19.5)
M12
M12 20388000 41 10 0,085

Connecting piece M10/M12 ST*galv.
32
with pivotable connection, used for the connection of space

frame to substructures with M10 connection thread.
M10
17
kgs
20659000 41 10 0,028
Suspension clamp 22mm ST*A2 polished
20381000 41 10 0,030
22
Ø 30) Suspension clamp 22mm ST*p.c.
(Ø
20660000 41 10 0,060
Suspension clamp 30mm ST*galv.
80
20382000 41 10 0,060
Ø5 (Ø7)
20
Suspension clamp 30mm ST*p.c.

15
1.5 (3) for hanging panels in front of the modular frame.
20662000 41 10 0,020
1.5 (3)
Support clamp 22mm ST*A2 polished
20384000 41 10 0,025
15
Support clamp 22mm ST*p.c.

Ø5 (Ø7)
20
20663000 41 10 0,059
Support clamp 30mm ST*galv.
80
Ø
( Ø 22
20385000 41 28,00 10 0,060
30
)
Support clamp 30mm ST*p.c.
for 22 or 30 mm tube dia., for vertical attachment of

panels in front of the modular frame.
20374000 41 14,00 10 0,050

Clamp 45° 22mm ST*galv.
20375000 41 20,00 10 0,050
Clamp 45° 22mm ST*p.c.
20392000 41 49,00 10 0,090
20393000 41 55,00 10 0,090
2
4
20376000 41 14,00 10 0,055

Ø
22 20377000 41 20,00 10 0,055
20394000 41 52,00 10 0,090
20
Ø5 20395000 41 58,00 10 0,090

20378000 41 14,00 10 0,050
71

°
90
20379000 41 20,00 10 0,050

20396000 41 54,00 10 0,100
20
20397000 41 58,00 10 0,100
92
for 22 or 30 mm tube dia., loading up to 20 kp
18
Panel Sizes
-Size -Size
-Size -28 -Size -36
10x45° 5x45°
Size -36
Size -28
-Size
-Size
10x45°
5x45°
Panel cutting dimension for 22 mm tube dia., for Panel cutting dimension for 30 mm tube dia., for
suspension clamp and support clamp 22 mm ST suspension clamp and support clamp 30 mm ST
-Size -Size
-Size -30 -Size -51
5x45° 5x45°
45°
-50
ze
-Size -50) x 0,866

-Si
ize
-S
45°
-Size -30
2
-7
60
-Size
5x45°
°
e
60
°
iz
°
90
-S
e
iz
-S
-Size -50
-Size
Panel cutting dimensions for 22 mm tube dia., for clamps 90°, 45° and 60°
-Size
-Size
-Size -38
-Size -65
45°
ize
-66
-Size -66) x 0,866

-S
ize
-S
45°
-Size -38
2
-Size
-9
60
ze
°
°
90
60
°
Si
e
z
Si
-Size -66
-Size
Panel cutting dimensions for 30 mm tube dia., for clamps 90°, 45° and 60°
19
kgs
20666000 41 100 0,010

Clamp 90/22 ST*nickel-plated
1.5
4
Ø2
2
for 22 mm tube dia.,

4
loading up to 10 Kg.
71
°
90
4
75
20677000 41 100 0,020

4 - 10 Clip 22/4-10mm KF*clear
20678000 41 100 0,022
Clip 30/4-10mm KF*clear
(43)
38
for 22 or 30 mm dia. tubes, for attachment of panels 4 to 10

mm thick, complete with allen screwdriver SW 4.
The panel is fitted after the framework has been assembled.
Ø22 The rigid panel can, in some cases, replace a diagonal tube.
(Ø30) The clip is tightened with the allen screwdriver SW 4, which
also fixes the panel element.
20
Panel Sizes
-Size
-Size -28
10x45°
-Size -28
10x45°
-Size
°
90
Panel dimensions for clamp 90°/22
-Size -Size
-Size -40 -Size -69

45°
-70
ize
-Size -70) x 0,866

-S
ize
Size -40
-S
Size
45°
8
°
60
-9
60
°
e
°
iz
90
-S
e
iz
-S
-Size -70
-Size
Panel dimensions for 22 mm tube dia., for clip 22/4-10 mm, 90°, 45° and 60°
-Size -Size
-Size -50 -Size -85

45°
-86
eiz
-Size -86) x 0,866

-S
ize
-S
-Size -50
45°
Size
20
°
60
60
°
-1
90
°
ze
Si
e
iz
-S
-Size -86
-Size
Panel dimensions for 22 mm tube dia., for clip 30/4-10 mm, 90°, 45° and 60°
21
kgs
50578400 41 100 0,006

4-6 Clip 22/4-6mm -NEW- KF*clear
30
15
R
for attachment of panels of 4-6 mm thickness, to 22 mm

tube dia.
39
2
Ø2
15
20673000 41 100 0,005

6-8 22
(8-10) 20675000 41 100 0,005
39.5
for attachment of panels of 6-8 mm and

8-10 mm thickness, to 22 mm tube dia.
2
Ø2
20674000 41 100 0,005

22 Clip 30/4-6mm KF*clear
4-6
for attachment of panels of 4-6 mm thickness, to 30 mm

tube dia.
51
The panel is fitted after the framework has been

0 assembled.
Ø3
20680000 41 10 0,010
Glass corner clamp Type II*clear
56
screwed to outside of structure, for fixing of panels,

5-6 mm thick in horizontal and vertical direction
24.5
in the diagonal hole of the node, complete with allen

screwdriver SW 4, loading 20 kg .
The glass panel is fitted after the

framework has been assembled.
22
Panel Sizes
-Size -Size
-Size -31 -Size -53
7 x 45° 7 x 45°
45°
-Size -54) x 0,866

-54
-Size -31
e
Siz
7 x 45°
ize
Size
-S
45°
5
-7
°
60
60
e
°
iz
°
90
-S
ze
Si
-Size -54
-Size
Panel cutting dimensions for tube dia. 22 mm, 90°, 45° and 60°, for clip 22/4-6 mm/6-8 mm/8-10 mm
-Size -Size
-Size -38 -Size -65

45°
-Size -66) x 0,866

-66
-S ize
ize
Size -38
-S
-Size
4 5°
5
1,
-9
°
e
90
iz
-S
e
iz
-S
-Size -66
-Size
Panel cutting dimensions for tube dia. 30 mm, 90°, 45° and 60°, for clip 30/4-6 mm
-Size
-Size -34
16 x 45°
-Size -34
16 x 45°
-Size
1) Pre-assemble two glass corner

clamps – tighten screw.
2) To the right, press into the diagonal tap
°
90
hole of the upper and lower nodes.

3) To the left, press two reverse parts of
the glass corner clamp into the diagonal
tap holes of the upper and lower nodes.
4) Insert glass panel and fix for part of
the glass corner clamp.
Panel cutting dimension for glass corner clamp M12 Type II KF:
The cutting dimension is the same for tubes of 22 mm and 30 mm dia.
23
kgs
20679000 41 10 0,010
Glass corner clamp 22 KF*clear
48
for fixing of panels, 5-8 mm thick in horizontal and

24
vertical direction, for use with round sleeve tube and

cube node. Complete with allen screwdriver SW4,
bearing capacity 20 kg.
The glass panel is fitted after assembly

of the framework.
50555900 41 1 0,084
Cladding connector M12*A2
M12
15
for fixing of lightweight panels of max. 16 mm thickness,

16 max
4 min
before the structure.
Installation with allen screwdriver SW6

Ø45
5
15.5 20 20686000 41 10 0,010

Corner connector type I KF*chrome
for sliding door profile. (p. 26)

25
13.8 20 20694000 41 10 0,010

Corner connector type II KF*chrome
for glazing profile. (p. 26)

20
24
Panel Sizes
-Size
-Size -34
17 x 45°
17 x 45°
-Size -34
-Size
°
90
Panel cutting dimension for glass corner clamp 22 mm KF
-Size
-Size -6
-Size -6
-Size
°
90
Panel cutting dimension for cladding connector M12 KF
25
kgs
20685000 41 1 1,150
25 Slid.door profile 22/30 3000mm AL*chrome
6 20683000 41 1 1,150
Slid.door profile 22/30 3000mm compl.AL*E6/EV1
6
10
23
for the construction of sliding door frames with

corner connectors type I KF (p. 24).
For 6 mm panel thickness. Cutting dimensions of
the frame: see p. 27.
Ø22
(Ø30)
21450000 41 1 0,050
Insert profile 1250mm KF*light grey
6
6
for the installation of sliding doors in sliding door frames
20692000 41 1 1,007
20
Glazing profile 22/30 3000mm AL*chrome
20696000 41 1 1,007
6 Glazing profile 22/30 3000mm AL*E6/EV1
7
for the construction of glazing frames together with

22
corner connectors type II KF*chrome(p. 24).

For 6 mm panel thickness
Ø22
(Ø30)
26
Panel Sizes
-Size
-Size
(-Size : 2) - 10
(-Size : 2) - 15
R1
R1
6
.5
.5
6
-Size -46
-Size -37
-Size
-Size
25
23 23
6 6
Ø1 Ø1
35
35
Panel cutting dimension for tube dia. Panel cutting dimension for tube dia.
22 mm, for sliding door profile 30 mm, for sliding door profile
Insertion Profile: Insertion Profile:

-Size -82 -Size -88
a) b) Cutting dimensions for the sliding door frame and

insertion profile:
a) for 22 mm tube diameter
-Size -48 Size -57 b) for 30 mm tube diameter
-Size Size
a) b)
Cutting dimension for the glazing frame:
a) for 22 mm tube diameter
b) for 30 mm tube diameter
-Size -46
-Size -56
-Size
Size
Size -Size
Size -33 -Size -42
7 x 45° 7 x 45°
6
-Size -42
7 x 45°
Size
-Size -33
7 x 45°
-Size
20
Panel cutting dimension for tube dia. Panel cutting dimension for tube dia.
22 mm, for glazing profile 30 mm, for glazing profile
27
kgs
20684000 41 100 0,349

Groove profile 2500mm KF*light grey
20682000 41 100 1,150
Groove profile 2500mm KF*white
For fixing of wooden panels, 19 mm thick or

more, in horizontal and vertical direction.
Special colours on request (minimum order-
ing quantity = 2500 lin.mtrs.) By means of
the asymmetric groove profile the accurately
10
cut panel can be pressed subsequently

into the module of frameworks consisting
of 22 mm or 30 mm diameter.
19
a) The panel is basically loaded on one
side only, from that side of the panel
where the solid part of the profile is located.
If the panel is inserted horizontally, the
solid part of the profile is always on top
b) Insertion in structures 22 M12:

Minimum angle between 2 panels 90°.
c) Insertion in structures 30 M12:

Minimum angle between 2 panels 60°.
b) c) The groove profile is stuck in with

cold glue. Width of groove B: for solid
wood = 3.0 mm, for chipboard = 2.8 mm,
depth of groove 10 mm. Minimum panel
thickness 19 mm.
Ø 30
Ø22
10
10
B
Ø 22
B
19
B
°
90
°
60
19
19
a) b) c)
28
Panel Sizes
-Size -Size
-Size -29.5 -Size-50.5
11 x 45° 11 x 45°
45°
-Size -51) x 0,866

-Size -29.5
Size-50.5
18 x 22,5°
11 x 45°
-Size
-Size
-S -71 5°
e 22,
e 5
.
-S 8 x
1
°
60
iz
iz
°
90
7 x 30°
-Size -51
-Size
Panel cutting dimension for tube dia. 22 mm, 90°, 45° and 60°, for groove profile
30°
22.5°
45°
45°
60
°
90
°
18
11 7
Corners cut after profile has been glued in!
-Size -Size
-Size -39 -Size -66,5

45°
Size -67,5) x 0,866

-Size -66,5
-Size -39
-Size
-Size
4
-9
e
iz
°
-S
iz
60
-S
°
90
-Size - 67.5
-Size
Panel cutting dimension for tube dia. 30 mm, 90°, 45° and 60°, for groove profile
22.5°
30°
45°
90
60
°
°
45°
Corners cut after profile has been glued in!
29
kgs
95
50212900 41 1 0,256
5 Spider fixing S4 complete
M12 M12
70
stainless steel, with 4 brackets, for the

attachment of panels or glass elements
in front of the construction.
70
95
50212800 41 1 0,229
95
Spider fixing S3 complete
5
M12 M12
70 stainless steel, with 3 brackets.
70
95
50212700 41 1 0,186
95
5
M12 M12
stainless steel, with 2 brackets.
70
35
50212600 41 1 0,139
65
5
M12
stainless steel, with 1 bracket.
35
35
30
kgs
50211700 41 0,003
1 Countersunk screw DIN7991 M5x20 A2 on request on request
1
50211600 41 0,018
2 Tightening washer D24x6mm, A2, polished on request on request
2 50211500 41 0,002
3 Disc D23/14,5x2mm*clear on request on request
3 50210700 4141 000000 021
4 Bolt M12/M5x16,5mm on request on request
50212100 41 0,142
4 5 Cross shaped fixture 4 on request on request
50210900 41 0,021
6 Countersunk screw DIN 7991 M12x20 A2 on request on request
6 50211400 41 0,006
7 Washer D18/12,2mm, A2 on request on request
5
8
Glass element with borehole Ø 16mm, distance
between borheholes 32/32 mm, distance between
7 glass panels is 6mm, thickness of glass panels is 6-8 mm
L1 - 6
Ø16
Panel sizes, technical sheets available on request!
32±0.2
32 ±0.2
L1 - 6
31
Girders 22 M12
Girders Duo, Quadro and Trio A 22 M12

Material and Finishes:

Steel 22 mm tube dia. with

MERO connection fittings M12 at each end.
The Girders 22 M12 are available in
chrome or powder coated finish.
System Sizes:
The length of the girder is designated by
system size L1 which is measured from
one node axis to the next. Special lengths
are available on request.
M12 System girders are light weight
elements produced in series with typical
MERO features and special
characteristics:
• high stability with a minimum of material
• Iarge module lengths and span widths
• short assembly time
• Iow construction height
• great design flexibility due to the
MERO geometry
• compatibility with all M12 System
programmes
32
kgs
Girder 22 M12 Description Price PU
20509000 41 1 0,920
Girder Duo 500mm 22M12 ST*chrome
20510000 41 1 0,920
Girder Duo 500mm 22M12 ST*p.c.
20511000 41 1 1,140
20512000 41 1 1,140
20513000 41 1 1,440
20514000 41 1 1,440
20515000 41 1 2,020
20516000 41 1 2,020
20517000 41 1 2,800
20518000 41 1 2,800
20520000 41 1 3,020
20519000 41 1 3,020
20521000 41 1 3,560
20522000 41 1 3,560
20523000 41 1 4,000
20524000 41 1 4,000
20527000 41 1 3,320
Girder Quadro 1000mm 22M12 ST*chrome
20528000 41 1 3,320
Girder Quadro 1000mm 22M12 ST*p.c.
20529000 41 1 6,300
20530000 41 1 6,300
20531000 41 1 7,100
20532000. 41 1 7,100
20533000 41 1 7,750
20534000 41 1 7,750
20535000 41 1 9,199
20536000 41 1 9,199
20537000 41 1 2,550
Girder Trio A 1000mm 22M12 ST*chrome
20538000 41 1 2,550
Girder Trio A 1000mm 22M12 ST*p.c.
20539000 41 1 4,850
20540000 41 1 4,850
20541000 41 1 7,200
20542000 41 1 7,200
33
kgs
Accessories for Girders 22 M12 Description Price PU
20495000 41 1 0,075
Threaded sleeve hexag., 2xM12 ST*chrome
20496000 41 1 0,075
Threaded sleeve hexag., 2xM12 ST*p.c.
46
M12
for connection or extension of
frame girders in place of the node
if lateral connection is not required.
SW19
20545000 41 1 0,109
T-Threaded sleeve Ø22mm 3xM12ST*chrom
Ø22 20546000 41 1 0,109
M12 °
90 23 T-Threaded sleeve Ø22mm 3xM12 ST*p.c.
Ø22
46
for connection or extension of frame

M12
girders in place of the node if lateral

34
connection is required.
20499000 41 1 0,880
Connecting kit M12 22,5° ST*chrome
20500000 41 1 0,600
Connecting kit M12 22,5° ST*p.c.
M12
M12
22.5°
250
22.50°
for designing barrel vault structures with
3014
frame girders Duo. Complete with

distance bush, and two special nodes.
1000
250 5028
20503000 41 1 0,190
Eighth circle tube r=250mm 22x 1,0M12*chrome
20504000 41 1 0,190
Eighth circle tube r=250mm 22x 1,0M12 ST*p.c.
45°
51
for designing decorative barrel vaults

or curved structures with a 135° angle
for types Duo and Quadro 22 M12.
250
34
kgs
Accessories for Girders 22 M12 Description Price PU
20391000 41 1 0,540
Shelf for leaflets*clear
270
32
320
without fixing parts, located between two
0
frame girders Duo 22 M12 on two parallel wires.

5
34
35
Doors kgs
Tools Description Price PU
50497700 41 1 20,000
Systemmaß 1000 Door element 22 M12 DIN R 1,0x2,0m*RAL9016
Lichte Weite 872
50497800 41 1 20,000
Door element 22 M12 DIN L 1,0x2,0m*RAL9016
41
Door element 30 M12 DIN R / DIN L 1,0x2,0m*RAL9016 on request
Systemmaß 2000
Lichte Höhe 2012
OKFFB
3
20698000 40 1 0,044
Spanner SW 17,5*galv.
23319000 40 1 0,044
23319000 40 1 0,044
20703000 40 1 0,100
Hook spanner for 22mm
used for Round Sleeve Tube
23321000 40 1 0,026
Allen screwdriver SW 3*with grip
50737600 40 1 0,026
Allen screwdriver SW 4*with grip
50737600 40 1 0,026
Allen screwdriver SW 4*nickel-plated
21464000 40 1 0,026
21465000 40 1 0,026
21466000 40 1 0,026
36
Aluminium Dome 30 M12
KO Standard Sizes for Each Dome Type.
Complete hemispheres are supplied as standard.

Additionally, a ring segment (= dome segment) can be
supplied for each dome, which increases the overall
height. This is of advantage for the standing height at
the edges of the dome, especially in the case of smaller
models.
Geometry
The basic geometric shape from which the M12 light
weight domes are generated, is the icosahedron (20
faces and 12 poles). By dividing each face of the
icosahedron (i.e. two, four, six and eight times) with ad-
ditional tubes and nodes, the curved network geometry
of the M12 light weight dome developes.
IKO 4 from 5–10 m,

IKO 6 from 8–15 m and
IKO 8 from 11–16 m
spherical diameters.
All dimensions are standard dimensions

measured from node axis to node axis.
Material and Finishes

Nodes and tubes in aluminum, anodized
E6/EV1 or powder coated.
Installation
Simple and quick because of the
numbered parts and exact assembly plans.
Cladding
With readily available panel materials and the M12
attachment hardware. For open air exhibits, with
fabric cladding.
Segments, Complete Spheres,

Cladding and Accessories,
such as cladding panels, fabric
cladding, supports and bottom plates
can be delivered on request.
Appendix C
gives comprehensive information about
the design and application method for
M12 lightweight domes.
37
kgs
Aluminium Dome 30 M12 Description Price PU
21276000 41 1 180,000
Hemisphere IKO 4, D 5000mm AL*E6/EV1
21282000 41 1 180,000
KO
Hemisphere IKO 4, D 5000mm AL*p.c.
21277000 41 1 194,000
21283000 41 1 194,000
21278000 41 1 203,000
IKO 4 21284000 41 1 203,000
diameter half sphere with add. dome segment 21279000 41 1 222,000
Height Height Hemisphere IKO 4, D 8000mm AL*E6/EV1
21285000 41 1 222,000
5m 2.500 m 3.191 m Hemisphere IKO 4, D 8000mm AL*p.c.
6m 3.000 m 3.829 m 21301000 41 1 236,000
7m 3.500 m 4.467 m Hemisphere IKO 4, D 9000mm AL*E6/EV1
8m 4.000 m 5.106 m
21286000 41 1 236,000
9m 4.500 m 5.744 m
10 m 5.000 m 6.382 m
21281000 41 1 249,000
21287000 41 1 249,000
21321000 41 1 40,000
Ring segment IKO 4, D 5000mm AL*E6/EV1
21327000 41 1 40,000
Ring segment IKO 4, D 5000mm AL*p.c.
21322000 41 1 43,000
21328000 41 1 43,000
21323000 41 1 47,000
21329000 41 1 47,000
21324000 41 1 50,000
Ring segment IKO 4, D 8000mm AL*E6EV1
21330000 41 1 50,000
21325000 41 1 53,000
Ring segment IKO 4, D 9000mm AL*E6EV1
21331000 41 1 53,000
21326000 41 1 57,000
21332000 41 1 57,000
38
kgs
21288000 41 1 399,000
)KO 21296000 41 1 399,000
21289000 41 1 419,000
21297000 41 1 419,000
21361000 41 1 439,000
IKO 6 21298000 41 1 439,000
diameter half sphere with add. dome segment
21291000 41 1 461,000
Height Height
8m 4.000 m 4.750 m 21299000 41 1 461,000
9m 4.500 m 5.344 m Hemisphere IKO 6, D 11000mm AL*p.c.
10 m 5.000 m 5.938 m 21292000 41 1 481,000
11 m 5.500 m 6.532 m Hemisphere IKO 6, D 12000mm AL*E6/EV1
12 m 6.000 m 7.126 m 21300000 41 1 481,000
13 m 6.500 m 7.719 m Hemisphere IKO 6, D 12000mm AL*p.c.
14 m 7.000 m 8.313 m 21293000 41 1 501,000
21302000 41 1 501,000
21294000 41 1 522,000
21303000 41 1 522,000
21295000 41 1 543,000
21304000 41 1 543,000
21333000 41 1 62,000
21341000 41 1 62,000
21334000 41 1 65,000
21342000 41 1 65,000
21335000 41 1 68,000
21343000 41 1 68,000
21336000 41 1 72,000
21344000 41 1 72,000
21337000 41 1 75,000
21345000 41 1 75,000
21338000 41 1 79,000
21346000 41 1 79,000
21339000 41 1 82,000
21347000 41 1 82,000
21340000 41 1 86,000
21348000 41 1 86,000
39
kgs
21305000 41 1 715,000
21311000 41 1 715,000
O
21306000 41 1 743,000
21312000 41 1 743,000
21307000 41 1 770,000
21313000 41 1 770,000
IKO 8
21308000 41 1 799,000
diameter half sphere with add. dome segment Hemisphere IKO 8, D 14000mm AL*E6/EV1
Height Height 21314000 41 1 799,000
11 m 5.500 m 6.285 m 21309000 41 1 817,000
13 m 6.500 m 7.428 m 21315000 41 1 817,000
14 m 7.000 m 7.999 m Hemisphere IKO 8, D 15000mm AL*p.c.
15 m 7.500 m 8.571 m
21310000 41 1 855,000
16 m 8.000 m 9.142 m
21316000 41 1 855,000
21349000 41 1 82,000
21355000 41 1 82,000
21350000 41 1 86,000
21356000 41 1 86,000
21351000 41 1 90,000
21357000 41 1 90,000
21352000 41 1 93,000
21358000 41 1 93,000
21353000 41 1 96,000
21359000 41 1 96,000
21354000 41 1 100,000
21360000 41 1 100,000
40
Biomorphic Structures ARCUS
System technology, subdivision into concave and convex elements
The “hardware” consists of 30 M12 tubes, steel laser-welded and of disc nodes dia. 60 mm, distance between planes 54 mm, thickness 30 mm.
Total construction height: 3500 mm.
The curved ARCUS elements created thereof describe two basic geometries: concave and convex. The top view shows each one circular element with a
15° opening. Both elements can be combined in almost any configuration. This system logic requires only 10 different tube lengths and 12 different node
geometries, enabling the designer to create a great number of geometries in a relatively short time.
Illustration: Element concave and convex
Fig. 1: 11 Elements concave Fig. 2: 11 Elements convex
Due to the possible combinations of concave and convex elements, the following distinction of construction sets was made:
Tube / node set (concave or convex): consisting of vertical tubes and nodes.
Tube set (concave or convex): consisting of horizontal and diagonal tubes.
For the transition between concave and convex, an extra transition tube / node set is required.
This consists like the tube / node set of vertical tubes and nodes.
The assembly time is short, as the constructional parts are all clearly marked and can be assigned easily with the help of the constructional drawings.
41
41
kgs
Biomorphic Structures ARCUS Description Price PU
Ø180 50712000 41 1 2,410

ARC Foot plate Ø 180x12mm ST*RAL 9006
height-adjustable with tread M20

53
12
50712100 41 1 0,500
ARC Foot part M20 ST*RAL 9006
Ø1
2
for connecting ARCUS and footplate

63
M20
54 45
50702400 41 1 9,000
ARC Convex tube-/ node set*RAL 9006
consisting of six nodes (A4 - A6) and five tubes,

ARC footplate and footpart
50702700 41 1 9,000
ARC Concave tube-/ node set*RAL 9006
consisting of six nodes (A1 - A3) and five tubes,

42
kgs
Biomorphic Structures ARCUS Description Price PU
50702900 41 1 14,000
ARC Convex tube set*RAL 9006
bestehend aus sechs Stäben für die Waagerechte und fünf

Stäben für die Diagonale
consisting of six horizontal and five diagonal tubes
50702800 ARC Konkav Stabsatz*RAL 9006 41 1 13,000

ARC Concave tube set*RAL 9006
bestehend aus sechs Stäben für die Waagerechte und fünf

Stäben für die Diagonale
consisting of six horizontal and five diagonal tubes
50702500 ARC Übergangs- Stab-/ Knotensatz gerade*RAL 9006 41 1 9,000

ARC Transition- tube-/ node set straight*RAL 9006
bestehend aus sechs Knoten (A7 - A12) und fünf Stäben

für die Senkrechte, ARC Fußplatte und Fußteil
consisting of six nodes (A7 - A12) and five vertical tubes

50702600 ARC Übergangs- Stab-/ Knotensatz gedreht*RAL 9006 41 1 9,000

ARC Transition- tube-/ node set twisted*RAL 9006
bestehend aus sechs Knoten (A13 - A18) und fünf Stäben

für die Senkrechte, ARC Fußplatte und Fußteil
consisting of six nodes (A13 - A18) and five vertical tubes,

50694900 Endrahmen 41 1 37,000

Endframe
zur Stabilisierung kleinerer Einheiten und bei statischen

Anforderungen in Messehallen
used to stabilize smaller units and for static requirements in

exhibition halls
43
Biomorphe Strukturen ARCUS
Biomorphic Structures ARCUS
Erklärung Übergangs- Stab-/Knotensatz gedreht und gerade
Beim Wechsel von Konkav zu Konvex gibt es keine Symmetrie der Knoten. Daher hat jeder Knoten eine eigene Bezeichnung. Die Position der Knoten ist
von der Aufbaurichtung abhängig. Es gibt zweierlei Sätze gerade (Knoten A7 – A12) und gedreht (Knoten A13 – A18).
Der gerade Übergangs Stab-Knotensatz wird verwendet, wenn der ARCUS nicht, bzw. im System verkleidet wird (Clip, Hohlkehlplatten). Hier ergeben die
angrenzenden Horizontalstäbe und der Knoten eine Linie.
Der gedrehte Übergangs Stab-Knotensatz wird verwendet bei Verkleidung vor dem System, wenn der Knoten die Aufnahme für die Befestigung darstellt
(z. B. Beschlag S oder Plattenverbinder). Hier ist der Knoten zu den angrenzenden Stäben um 15° verdreht. Aus diesem Grunde spart man sich geson-
derte Verkleidungselemente für die Übergänge.
Bei Verkleidung des ARUCS mit einer kompletten Außenhaut (Stoff, Folie) können beide Versionen eingesetzt werden.
Statik / Endrahmen
Für das Bausystem ARCUS besteht eine prüffähige statische Berechnung bei der auch die Windlasten im Falle der Verkleidung des Systems mit berück-
sichtigt sind.
Je nach Anordnung und Anzahl der Segmente werden hier Fußplatten, Endrahmen oder auch Befestigungen am Boden notwendig.
Detailing of Transition Tube / Node Set Twisted and Straight
When changing from concave to convex, there is no symmetry of the nodes. Therefore, each node has got its own description. The position of the node is
dependent on the direction of assembly, two different sets, one straight (nodes A7 – A12) and one twisted (nodes A13 – A18) exist.
The straight transition tube / node set is used, if the ARCUS is not covered within the system axis (clips, groove panels). The adjacent horizontal tubes and
the node form one line.
The twisted transition tube / node set is used for coverings in front of the system axis if the node provides the reception of the fixing (e.g. spider fixing S or
panel connector). The node is twisted by 15° to the adjacent tubes. For this reason particular cladding elements maybe spared.
When covering the ARCUS with a complete outer skin (fabric, foil), then both versions may be applied.
Structural Calculation / End Frame
For the construction system ARCUS an auditable static calculation is available, taking into account the wind loads if the system is covered.
Depending on layout and number of segments, there may be a requirement for foot plates, end frames or fixings to the ground.
44
®
Modulare Systeme
Exhibit
ModularSystems
Systems
Airport - Technik
Maintenance Dock Systems

M12 Catalogue

Uploaded by

Copyright:

Available Formats

M12 Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

M12 Catalogue

Uploaded by

Copyright:

Available Formats

®

Component Catalogue, Price List 2006

Publication for planners and users of MERO-TSK

© MERO-TSK International GmbH & Co. KG

We reserve the right to modify prices, construction,

General Technical Notes:

This application-orientated documentation

Spaceframe structures consisting of M12 System components

Price Schedule for Special Lengths:

For larger quantities: price next length without extra charge

Valid from June 1st, 2006

The prices quoted are in EUR and are valid ex works as

Sold only in packing units. (PU)

Standard Node M12,

Steel Nodes M12

Aluminium Nodes M12

Colours may vary slightly.

Norm-Knoten M12, PGR kgs

with 18 tap holes. Referring to the vertical main axis the

with 14 tap holes. The two vertical tap holes on both

with 13 tap holes. Because of its larger contact surface

with 14 tap holes. A diagonal tap hole row with flat

with 5 tap holes, 3 of which have variable angles around

with 6 tap holes, connecting an angle of

height 22 mm, 8 tap holes on the perimeter.

height 22 mm, 8 tap holes on the perimeter.

height 22 mm, 5 tap holes on the perimeter angled 45°.

bei Verwendung von Normknoten

L3 = abhängig vom verwendeten

L3 = dependent on node type

Kontentyp und Rastermaß

Tubes 22 M12, Tubes 30 M12,

All aluminium tubes 22 M12 and 30 M12

Tubes 1/4K 22 mm ST R1 System radius

20081000 Tube 250mm 22x1,0 M12 ST chrome 41 1 0,250

*) Space diagonal of the spaceframe type ”Milan“ 1 m module.

20018000 Tube 250mm 22x1,0 M12 AL anod.E6/EV1 41 1 0,185

*) Space diagonal of the spaceframe type ”Milan“ 1 m module.

slotted tube accessories.

For further additions refer to standard

Slotted tubes can be supplied chromed

20753000 Konsole 300mm ST*chrom 41 1 0,230

or with an angle of 15°

20754000 Konsolenwinkel 300mm ST*chrom 41 1 0,182

20409000 Konsolenwinkel 300mm ST*lack. 41 1 0,180

Ø7,5 für Konsole 300 mm, mit Befestigungsmaterial

20756000 Zwischenrohr 1000mm ST*chrom 41 1 0,620

zur Herstellung von Tablarträgern mit Konsolen 300 mm

20755000 Schrägkonsole 30° ST*chrom 41 1 0,268

2041000 Schrägkonsole 30° ST*lack. 41 1 0,270

Tablarträgern mit 30° Neigung

to make shelf frames with

for inclined bracket

Ø22 Bracket w. thread 22M12 ST*chrome

Bracket w. thread 30M12 ST*chrom

M12 Bracket w. thread 30M12 ST*p.c.

for standard tubes in standard lengths

20772000 41 100 0,002

M12 20368000 41 10 0,070

50 mm Ø, used as base and top plate or spacer to the wall.