AU Optronics B173RW01 Ver 5

Product Specification
AU OPTRONICS CORPORATION
(
) Preliminary Specifications
( ) Final Specifications
Module
17.3 (17.26) HD+ 16:9 Color TFT-LCD with LED Backlight design
Model Name
B173RW01 V5 (H/W:0A)
Note
LED Backlight with driving circuit design
Customer
Checked &
Approved by
Date
Date
Note: This Specification is subject to change

without notice.
B173RW01 V5
Document Version : 0.1
Approved by
Date
Emerson Huang
2012/01/31
Prepared by
Date
Kay CY Wang
2012/01/31
NBBU Marketing Division /

AU Optronics corporation
1 of 31
Contents
1. Handling Precautions .......................................................................................4
2. General Description..........................................................................................5
2.1 General Specification .........................................................................................................5
2.2 Optical Characteristics........................................................................................................6
3. Functional Block Diagram..............................................................................11

4. Absolute Maximum Ratings ...........................................................................12
4.1 Absolute Ratings of TFT LCD Module...............................................................................12
4.2 Absolute Ratings of Environment .....................................................................................12
5. Electrical characteristics ................................................................................13

5.1 TFT LCD Module ..................................................................................................................13
5.2 Backlight Unit ......................................................................................................................15
5.2.1 LED characteristics ..........................................................................................................15
6. Signal Characteristic ......................................................................................16

6.1 Pixel Format Image ............................................................................................................16
6.2 The input data format........................................................................................................17
6.3 Integration Interface and Pin Assignment .....................................................................18
6.3.1 Connector Description ...................................................................................................18
6.4 Interface Timing..................................................................................................................20
7. Vibration and Shock Test................................................................................22

7.1 Vibration Test.......................................................................................................................22
7.2 Shock Test Spec:.................................................................................................................22
7.3. Reliability.............................................................................................................................22
8. Mechanical Characteristics...........................................................................23
8.1 LCM Outline Dimension.....................................................................................................23
8.2 Screw Hole Depth and Center Position ..........................................................................25
9. Shipping and Package...................................................................................26

9.1 Shipping Label Format.......................................................................................................26
9.2. Carton package ...............................................................................................................26
9.3 Shipping package of palletizing sequence...................................................................27
10. Appendix: EDID description .........................................................................28
B173RW01 V5
2 of 31
Record of Revision
Version and Date Page
0.1
2012/01/31
B173RW01 V5
All
Old description
New Description
Remark
Preliminary Edition for Customer
3 of 31
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft
cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped
on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to
rotate nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing
the enclosure, it should be taken into consideration that no bending/twisting
forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module.
The LCD module should be supplied by power complied with requirements of Limited
Power Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric
shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of
TFT module that a LED light bar build in as a light source of back light unit. It can
prevent electros tic breakdown.
B173RW01 V5
4 of 31
2. General Description
B173RW01 V5 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the
16:9 HD+ (1600(H) x 900(V)) screen and 262k colors (RGB 6-bits data driver) with LED
backlight driving circuit. All input signals are LVDS interface compatible.
B173RW01 V5 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification

The following items are characteristics summary on the table at 25
Items
condition:
Unit
Specifications
Screen Diagonal
[mm]
17.3(17.26)
Active Area
[mm]
382.08 X 214.92
[mm]
1600x3(RGB) x 900
0.2388X0.2388
Pixels H x V
Pixel Pitch
Pixel Format
R.G.B. Vertical Stripe
Display Mode
White Luminance (ILED=20mA)
(Note: ILED is LED current)
Normally White
[cd/m2]
Luminance Uniformity
220 typ. (5 points average)

187 min. (5 points average)
1.25 max. (5 points)
Contrast Ratio
Response Time
[ms]
500:1 typ
8 typ/16max
Nominal Input Voltage VDD
[Volt]
+3.3 typ.
Power Consumption
[Watt]
6.5 max. (Include Logic and Blu power)
Weight
[Grams]
Physical Size
Without inverter, bracket.
Electrical Interface
Glass Thickness
570 max.
[mm]
Min.
Typ.
Max.
398.1
232.8
-
398.6
233.3
5.8
[mm]
Length
397.6
Width
232.3
Thickness
2 channel LVDS
0.5
Surface Treatment
Glare
Support Color
262K colors ( RGB 6-bit )
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
B173RW01 V5
[oC]
[oC]
0 to +50
-20 to +60
RoHS Compliance
5 of 31
2.2 Optical Characteristics

The optical characteristics are measured under stable conditions at 25
Item
Symbol
White Luminance
ILED=20mA
Conditions
5 points average
(Room Temperature) :
Unit
Note
Min.
Typ.
Max.
187
220
cd/m2 1, 4, 5.
R
L
Horizontal
CR = 10
(Right)
(Left)
40
45
degre
40
45
H
L
Vertical
(Upper)
CR = 10 (Lower)
10
15
30
35
5P
5 Points
1.25
1, 3, 4
13P
13 Points
1.60
2, 3, 4
Contrast Ratio
CR
400
500
4, 6
Cross talk
4, 7
Response Time
TRT
Viewing Angle
Red
Color /
Chromaticity
Coodinates
Green
White
NTSC
B173RW01 V5
16
Rx
0.585
0.615
0.645
Ry
0.317
0.347
0.377
Gx
0.288
0.318
0.348
Gy
0.579
0.609
0.639
0.120
0.150
0.180
By
0.084
0.114
0.144
Wx
0.283
0.313
0.343
Wy
0.299
0.329
0.359
60
Bx
Blue
Rising + Falling
CIE 1931
4, 9
6 of 31
Note 1: 5 points position (Ref: Active area)
W
W /4
W /4
W /4
W /4
H /4
H /4
H
H /4
4
H /4
Note 2: 13 points position (Ref: Active area)

W
W /4
W /4
W /4
W /4
10
10
10
H /4
H /4
H /4
9
H /4
11
10
10
12
13
Note 3: The luminance uniformity of 5 or13 points is defined by dividing the maximum luminance values by
the minimum test point luminance
Maximum Brightness of five points

W5 =
Minimum Brightness of five points

Maximum Brightness of thirteen points
W13 =
Minimum Brightness of thirteen points
Note 4: Measurement method

The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed after
B173RW01 V5
7 of 31
lighting Backlight for 30 minutes in a stable, windless and dark room, and it should be measured in the
center of screen.
Photo detector
Field=2
50 cm
LCD Panel
TFT-LCD Module
Center of the screen
Definition of Average Luminance of White (Y ):
Note 5
Measure the luminance of gray level 63 at 5 points YL = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (1).
Note 6
Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Contrast ratio (CR)=
Brightness on the White state

Brightness on the Black state
Definition of Cross Talk (CT)
Note 7
CT = | YB YA | / YA 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
B173RW01 V5
8 of 31
Note 8: Definition of response time:
The output signals of BM-7 or equivalent are measured when the input signals are changed from Black
to White (falling time) and from White to Black (rising time), respectively. The response time interval
between the 10% and 90% of amplitudes. Refer to figure as below.
"Black"
"White"
Signal(Relative value)
B173RW01 V5
"White"
100%
90%
10%
0%
Tr
Tf
9 of 31
Note 9. Definition of viewing angle
Viewing angle is the measurement of contrast ratio
10, at the screen center, over a 180 horizontal
and 180 vertical range (off-normal viewing angles). The 180 viewing angle range is broken down as
follows; 90 () horizontal left and right and 90 () vertical, high (up) and low (down). The measurement
direction is typically perpendicular to the display surface with the screen rotated about its center to
develop the desired measurement viewing angle.
B173RW01 V5
10 of 31
3. Functional Block Diagram

The following diagram shows the functional block of the 17.3 inches wide Color TFT/LCD 40 Pin.
B173RW01 V5
11 of 31
4. Absolute Maximum Ratings

An absolute maximum rating of the module is as following:
4.1 Absolute Ratings of TFT LCD Module

Item
Symbol
Min
Max
Unit
Conditions
Logic/LCD Drive
Vin
-0.3
+4.0
[Volt]
Note 1,2
4.2 Absolute Ratings of Environment

Item
Symbol
Min
Max
Unit
Conditions
Operating
TOP
+50
[oC]
Note 4
Operation Humidity
HOP
95
[%RH]
Note 4
Note 4
Note 4
Storage Temperature
TST
-20
+60
[oC]
Storage Humidity
HST
95
[%RH]
Note 1: At Ta (25
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: LED specification refer to section 5.2
Note 4: For quality performance, please refer to AUO IIS (Incoming Inspection Standard).
Twb=39C
Operating Range
B173RW01 V5
Storage Range
12 of 31
5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows;
and frame frenquency under 60Hz
The power specification are measured under 25

Symble
VDD
Parameter
PDD
Logic/LCD Drive
Voltage
VDD Power
IDD
IDD Current
IRush
Inrush Current
VDDrp
Allowable
Logic/LCD Drive
Ripple Voltage
Min
Typ
Max
3.0
3.3
3.6
[Volt]
1.5
[Watt]
350
450
[mA]
2000
[mA]
100
[mV]
p-p
Note 1 : Maximum Measurement Condition
Units
Note
Note 1/2
Note 1/2
Note 3
Black Pattern at 3.3V driving voltage. (P
max=V3.3 x Iblack)
Note 2 Measure Condition
3.3V
90%
10%
0V
0.5ms
Vin rising time

B173RW01 V5
13 of 31
5.1.2 Signal Electrical Characteristics

Input signals shall be low or High-impedance state when VDD is off.
Signal electrical characteristics are as follows;
Parameter
Condition
Vth
Differential Input High

Threshold (Vcm=+1.2V)
Vtl
Differential Input Low

Threshold (Vcm=+1.2V)
VID
Vcm
Min
Unit
100
[mV]
-100
[mV]
-
Differential Input Voltage

Differential Input Common
Mode Voltage
Max
100
600
[mV]
1.125
1.375
[V]
Note: LVDS Signal Waveform
B173RW01 V5
14 of 31
5.2 Backlight Unit

5.2.1 LED characteristics
Parameter
Symbol
Min
Typ
Max
PLED
4.8
5.0
Backlight Power
Units
Condition
[Watt]
(Ta=25
Consumption
LED Life-Time
), Note 1
Vin =12V
N/A
15,000
(Ta=25
Hour
), Note 2
IF=20 mA
Note 1: Calculator value for reference PLED = VF (Normal Distribution) * IF (Normal Distribution) / Efficiency
Note 2: The LED life-time define as the estimated time to 50% degradation of initial luminous.
5.2.2 Backlight input signal characteristics
Parameter
LED Power Supply
Symbol
Min
Typ
Max
Units
VLED
--
21
[Volt]
5.5
[Volt]
0.8
[Volt]
5.5
0.8
FPWM
200
1K
20k
Duty
--
100
LED Enable Input

High Level
LED Enable Input
Low Level
VLED_EN
PWM Logic Input

High Level
[Volt]
PWM Input Frequency

PWM Duty Ratio
B173RW01 V5
Define as
Connector
VPWM_EN
PWM Logic Input
Low Level
Remark
[Volt]
Interface
(Ta=25
Hz
%
15 of 31
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1600
1st Line
R GB R GB
R GB R GB
900th Line
R GB R GB
R GB R GB
B173RW01 V5
16 of 31
6.2 The input data format
Signal Name
R5
R4
R3
R2
R1
R0
Description
Red Data 5 (MSB)
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0 (LSB)
Red-pixel Data
Each red pixel's brightness data consists of these 6 bits pixel data.
Red-pixel Data
G5
G4
G3
G2
G1
G0
Green Data 5 (MSB)

Green Data 4
Green Data 3
Green Data 2
Green Data 1
Green Data 0 (LSB)
B5
B4
B3
B2
B1
B0
Green-pixel Data
Blue Data 5 (MSB)
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0 (LSB)
RxCLKIN
Blue-pixel Data
Data Clock
DE
Display Timing
VS
HS
Vertical Sync
Horizontal Sync
Green-pixel Data
Each green pixel's brightness data consists of these 6 bits pixel
data.
Blue-pixel Data
Each blue pixel's brightness data consists of these 6 bits pixel data.
The signal is used to strobe the pixel data and DE signals. All pixel
data shall be valid at the falling edge when the DE signal is high
This signal is strobed at the falling edge of
RxCLKIN. When the signal is high, the pixel data shall be valid to
be displayed.
The signal is synchronized to RxCLKIN .
The signal is synchronized to RxCLKIN .
Note: Output signals from any system shall be low or High-impedance state when VDD is off.
B173RW01 V5
17 of 31
6.3 Integration Interface and Pin Assignment

6.3.1 Connector Description
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be following components.
Connector Name / Designation
For Signal Connector
Manufacturer
JAE or compatible
Type / Part Number
HD1S040HA1 or compatible
Mating Housing/Part Number
IPEX 20353-040T-11 or compatible
6.3.2 Pin Assignment

LVDS is a differential signal technology for LCD interface and high speed data transfer device.
Pin
Signal
Description
NC
AVDD
PowerSupply,3.3V(typical)
AVDD
PowerSupply,3.3V(typical)
No Connection (Reserve)
DVDD
NC
No Connection (Reserve for M1 aging)
SCL
EDID Clock Input
SDA
EDID Data Input
Odd_Rin0-
-LVDSdifferential data input(R0-R5,G0)
Odd_Rin0+
+LVDS differential data input(R0-R5,G0)
10
GND
11
Odd_Rin1-
-LVDS differential data input(G1-G5,B0-B1)
12
Odd_Rin1+
+LVDS differential data input(G1-G5,B0-B1)
13
GND
14
Odd_Rin2-
-LVDS differential data input(B2-B5,HS,VS,DE)
15
Odd_Rin2+
+LVDS differential data input(B2-B5,HS,VS,DE)
16
GND
17
Odd_ClkIN-
-LVDS differential clock input
18
Odd_ClkIN+
+LVDS differential clock input
19
GND
20
Even_Rin0-
-LVDS differential data input(R0-R5,G0)
21
Even_Rin0+
+LVDS differential data input(R0-R5,G0)
22
GND
23
Even_Rin1-
-LVDS differential data input(G1-G5,B0-B1)
24
Even_Rin1+
+LVDS differential data input(G1-G5,B0-B1)
25
GND
B173RW01 V5
DDC 3.3Vpower
Ground
Ground
Ground
GroundShield
Ground
Ground
18 of 31
26
Even_Rin2-
-LVDS differential data input(B2-B5,HS,VS,DE)
27
Even_Rin2+
+LVDS differential data input(B2-B5,HS,VS,DE)
28
GND
29
Even_ClkIN-
-LVDS differential clock input
30
Even_ClkIN+
+LVDS differential clock input
31
GND
32
VLED_GND
LED Ground
33
VLED_GND
LED Ground
34
NC
35
PWM
36
LED_EN
37
NC
38
VLED
LED Power Supply
39
VLED
LED Power Supply
40
VLED
LED Power Supply
Ground
GroundShield
System PWM Logic Input level
LED enable input level
Note1: Input signals shall be low or High-impedance state when VDD is off.
B173RW01 V5
19 of 31
6.4 Interface Timing

6.4.1 Timing Characteristics
Basically, interface timings should match the 1600x900 /60Hz manufacturing guide line
timing.
Parameter
Symbol
Min.
Typ.
Max.
Unit
Frame Rate
50
60
Hz
Clock frequency
1/ TClock
50
55
85-
MHz
Period
TV
908
916
2047
Active
TVD
Blanking
TVB
16
Period
TH
840
1080
2047
Active
THD
Blanking
THB
Vertical
Section
Horizontal
Section
TLine
900
TClock
800
40
280
--
Note : DE mode only

6.4.2 Timing diagram
Input Timing Definition ( DE Mode)
TCLOCK
DOTCLK
Input
Data
Invaild
Data
Pixel
1
Pixel
2
Pixel
3
Pixel
N-1
Pixel
N
Invaild
Data
Pixel
1
DE
THB
THD
TH
DE
TVB
TVD
TV
B173RW01 V5
20 of 31
6.5 Power ON/OFF Sequence

Power on/off sequence is as follows. Interface signals and LED on/off sequence are also shown in
the chart. Signals from any system shall be Hi-Z state or low level when VDD is off
Note 1 : If T3<200ms, the display garbage may occur. (T3>200ms is recommended)

2
Note 2If T1 or T12<0.5ms, the inrush current may cause the damage of fuse. If T1 or T12<0.5ms, the inrush current I t
is under typical melt of fuse Spec, there is no mentioned problem.
B173RW01 V5
21 of 31
7. Vibration and Shock Test

7.1 Vibration Test
Test Spec:

Test method: Non-Operation

Acceleration: 1.5 G
Frequency: 10 - 500Hz Random
Sweep:
30 Minutes each Axis (X, Y, Z)
7.2 Shock Test Spec:

Test Spec:

Test method: Non-Operation

Acceleration: 220 G , Half sine wave
Active time: 2 ms
Pulse:
X,Y,Z .one time for each side
7.3. Reliability
Items
Required Condition
Note
, 90%RH, 300h
Ta= 50, Dry, 300h
Ta= 0, 300h
High Temperature Storage Ta= 60, 35%RH, 300h
Low Temperature Storage Ta= -20, 50%RH, 300h
Thermal Shock
Ta=-20to 60, Duration at 30 min, 100 cycles
Test
Temperature
Humidity Bias
High Temperature
Operation
Low Temperature
Operation
ESD
Ta= 40
Contact : 8 KV
Note 1
Air : 15 KV
Note1: According to EN 61000-4-2 , ESD class B: Some performance degradation allowed. No data lost
. Self-recoverable. No hardware failures.
Remark: MTBF (Excluding the LED): 30,000 hours with a confidence level 90%
B173RW01 V5
22 of 31
8. Mechanical Characteristics
8.1 LCM Outline Dimension
B173RW01 V5
23 of 31
Note: Prevention IC damage, IC positions not allowed any overlap over these areas.
B173RW01 V5
24 of 31
8.2 Screw Hole Depth and Center Position

Maximum Screw penetration from side surface is 2.5mm (See drawing)
Screw hole center location, from front surface = 3.10 0.3mm (See drawing)
Screw Torque: Maximum 2.5 kgf-cm
B173RW01 V5
25 of 31
9. Shipping and Package

9.1 Shipping Label Format
Z40
S01
9.2. Carton package
B173RW01 V5
26 of 31
9.3 Shipping package of palletizing sequence
B173RW01 V5
27 of 31
10. Appendix: EDID description
B173RW01 V5 EDID Code

Address
FUNCTION
Value
Value
Value
HEX
BIN
DEC
00
00000000
01
FF
11111111
255
02
FF
11111111
255
03
FF
11111111
255
04
FF
11111111
255
05
FF
11111111
255
06
FF
11111111
255
07
00
00000000
HEX
00
Header
08
EISA Manuf. Code LSB
06
00000110
09
Compressed ASCII
AF
10101111
175
9E
10011110
158
15
00010101
21
00
00000000
0D
00
00000000
0E
00
00000000
0F
00
00000000
0B
Product Code
hex, LSB first
0C
32-bit ser #
0A
10
Week of manufacture
00
00000000
11
Year of manufacture
15
00010101
21
12
EDID Structure Ver.
01
00000001
EDID revision #
04
00000100
90
10010000
144
26
00100110
38
15
00010101
21
78
01111000
120
18
Display Gamma
(=(gamma*100)-100)
Feature support (no DPMS, Active OFF,
RGB, tmg Blk#1)
02
00000010
19
Red/green low bits (Lower 2:2:2:2 bits)
C4
11000100
196
1A
Blue/white low bits (Lower 2:2:2:2 bits)
95
10010101
149
1B
Red x (Upper 8 bits)
9E
10011110
158
1C
Red y/ highER 8 bits
57
01010111
87
1D
Green x
53
01010011
83
1E
Green y
92
10010010
146
1F
Blue x
26
00100110
38
20
Blue y
0F
00001111
15
21
White x
50
01010000
80
22
White y
54
01010100
84
23
Established timing 1
00
00000000
24
00
00000000
13
Video input def.

14
(digital I/P, non-TMDS,

CRGB)
15
Max H image size
(rounded to cm)
16
Max V image size
(rounded to cm)
17
B173RW01 V5
28 of 31
25
00
00000000
26
Standard timing #1
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
01
00000001
27
28
Standard timing #2
29
2A
Standard timing #3
2B
2C
Standard timing #4
2D
2E
Standard timing #5
2F
30
Standard timing #6
31
32
Standard timing #7
33
34
Standard timing #8
35
36
Pixel Clock/10000 LSB
10
00010000
16
37
Pixel Clock/10000 USB
27
00100111
39
38
Horz active Lower 8bits
40
01000000
64
39
Horz blanking Lower 8bits
C6
11000110
198
3A
HorzAct:HorzBlnk
Upper 4:4 bits
Vertical Active Lower 8bits
60
01100000
96
84
10000100
132
1A
00011010
26
30
00110000
48
3B
3C
Vertical Blanking
3D
Vert Act : Vertical Blanking
3E
HorzSync. Offset
30
00110000
48
3F
HorzSync.Width
20
00100000
32
40
VertSync.Offset : VertSync.Width
36
00110110
54
00
00000000
41
Lower 8bits
(upper 4:4 bit)
Horz&Vert Sync Offset/Width Upper 2bits
42
Horizontal Image Size Lower 8bits
7E
01111110
126
43
Vertical Image Size Lower 8bits
D6
11010110
214
44
Horizontal & Vertical Image Size (upper 4:4 bits)
10
00010000
16
45
Horizontal Border (zero for internal LCD)
00
00000000
00
00000000
18
00011000
24
46
47
Vertical Border (zero for internal LCD)

Signal (non-intr, norm, no stero, sep sync,
neg pol)
48
Detailed timing/monitor
00
00000000
49
descriptor #2
00
00000000
4A
00
00000000
4B
0F
00001111
15
4C
00
00000000
4D
00
00000000
4E
00
00000000
B173RW01 V5
29 of 31
4F
00
00000000
50
00
00000000
51
00
00000000
52
00
00000000
53
00
00000000
54
00
00000000
55
00
00000000
56
00
00000000
57
00
00000000
58
00
00000000
59
20
00100000
32
5A
00
00000000
5B
descriptor #3
00
00000000
5C
00
00000000
5D
FE
11111110
254
5E
00
00000000
5F
Manufacture
41
01000001
65
60
Manufacture
55
01010101
85
61
Manufacture
4F
01001111
79
62
0A
00001010
10
63
20
00100000
32
64
20
00100000
32
65
20
00100000
32
66
20
00100000
32
67
20
00100000
32
68
20
00100000
32
69
20
00100000
32
6A
20
00100000
32
6B
20
00100000
32
6C
00
00000000
6D
descriptor #4
00
00000000
6E
00
00000000
6F
FE
11111110
254
70
00
00000000
71
Manufacture P/N
42
01000010
66
72
Manufacture P/N
31
00110001
49
73
Manufacture P/N
37
00110111
55
74
Manufacture P/N
33
00110011
51
75
Manufacture P/N
52
01010010
82
76
Manufacture P/N
57
01010111
87
77
Manufacture P/N
30
00110000
48
78
Manufacture P/N
31
00110001
49
Manufacture P/N
20
00100000
32
79
B173RW01 V5
30 of 31
7A
Manufacture P/N
56
01010110
86
7B
Manufacture P/N
35
00110101
53
7C
20
00100000
32
7D
0A
00001010
10
7E
Extension Flag
00
00000000
7F
Checksum
C0
11000000
192
B173RW01 V5
31 of 31

AU Optronics B173RW01 Ver 5

Uploaded by

Copyright:

Available Formats

AU Optronics B173RW01 Ver 5

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AU Optronics B173RW01 Ver 5

Uploaded by

Copyright:

Available Formats

Product Specification

LED Backlight with driving circuit design

Note: This Specification is subject to change

Document Version : 0.1

NBBU Marketing Division /

3. Functional Block Diagram..............................................................................11

5. Electrical characteristics ................................................................................13

6. Signal Characteristic ......................................................................................16

7. Vibration and Shock Test................................................................................22

9. Shipping and Package...................................................................................26

10. Appendix: EDID description .........................................................................28

Document Version : 0.1

Preliminary Edition for Customer

Document Version : 0.1

Document Version : 0.1

2.1 General Specification

R.G.B. Vertical Stripe

220 typ. (5 points average)

Nominal Input Voltage VDD

6.5 max. (Include Logic and Blu power)

262K colors ( RGB 6-bit )

Document Version : 0.1

2.2 Optical Characteristics

Document Version : 0.1

Note 2: 13 points position (Ref: Active area)

Maximum Brightness of five points

Minimum Brightness of five points

Minimum Brightness of thirteen points

Note 4: Measurement method

Document Version : 0.1

Center of the screen

Definition of Average Luminance of White (Y ):

Definition of contrast ratio:

Contrast ratio is calculated with the following formula.

Contrast ratio (CR)=

Brightness on the White state

Definition of Cross Talk (CT)

Document Version : 0.1

Note 8: Definition of response time:

Document Version : 0.1

10, at the screen center, over a 180 horizontal

Document Version : 0.1

3. Functional Block Diagram

Document Version : 0.1

4. Absolute Maximum Ratings

4.1 Absolute Ratings of TFT LCD Module

4.2 Absolute Ratings of Environment

Document Version : 0.1

and frame frenquency under 60Hz

The power specification are measured under 25

Note 1 : Maximum Measurement Condition

Black Pattern at 3.3V driving voltage. (P

Note 2 Measure Condition

Vin rising time

Document Version : 0.1

5.1.2 Signal Electrical Characteristics

Signal electrical characteristics are as follows;

Differential Input High

Differential Input Low