Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Understanding Carbon Mesh Size

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

UNDERSTANDING CARBON

MESH SIZE
Reprinted with permission from WATER TECHNOLOGY, March 1993

Smaller granules equal bigger performance


Carbon filters for domestic water treatment are increasingly
popular, but many water treatment professionals may not
realize the impact carbons mesh size can have on a
filters performance.
Mesh size, which indicates the range of particles sizes in a
particular carbon product, is an important physical
consideration. Other physical properties of activated
carbon include its apparent density, which refers to its
weight-to volume ratio; and its abrasion resistance, which
refers to its ability to withstand degradation during
handling, backwashing and reactivation.

Mesh Size 20 x 50
U.S.Sieve Series
Maximum amount larger than 20 mesh screen
3%
Maximum amount smaller than 50 mesh screen
1%
Activated carbon products can also be characterized by
activity properties including iodine number and molasses
number, which indicate carbons capacity to adsorb
compounds of varying molecular sizes. Nonetheless, particle
size is one of the most important influences on carbons
performance in home drinking water treatment devices.
Optimum mesh sizes enhance organic adsorption and
speed chlorine conversion to reduce taste and odor. Mesh
size also determines treatment system pressure drop.
Understanding mesh size and its effect on carbon
performance is therefore essential for designing and
installing carbon water treatment systems.

Openings per Square Inch


Mesh size refers to the number of open spaces in a square
inch of screen through which particles pass. Activated
carbon particle size distribution is expressed as the relative
percentage, by weight, of different-sized particles within
the carbon mix. The more intermediate-sized screens used
in the analysis, the more precise the range of particle sizes
becomes. Usually, the number of screens is few and the
resolution is limited to two divisions, typically expressed as
the maximum and minimum sieve sizes the carbon can
pass through (see above table).
For example, the 20 in the 20x50 sieve size refers to
the largest mesh screen the carbon particles pass through.
Likewise, the 50 refers to the smallest mesh screen the
carbon particles pass through. Mesh size is defined by two
types of standard sieve scales: United States standard and
Tyler standard. Both scales are observed by the United

www.calgoncarbon.com

States Bureau of Standards, American National Standards


Institute and American Society for Testing and Materials.
The U.S. standard is most commonly used in the U.S.

Dechlorination for Taste


Using activated carbon to remove residual chlorine from
drinking water is popular because many municipalities add
chlorine disinfectants to water. About five parts per million
(ppm) chlorine gas is injected into water to produce free
chlorine that destroys and deactivates pathogenic and
other organisms through oxidation. The residual free
chlorine provides continued disinfection as water is piped
to homeowners, but causes undesirable taste and odor.
Activated carbon de-chlorinates drinking water through a
chemisorption process whereby residual chlorine (hypochlorous acid) catalytically reacts with the carbon surface
and is transformed into ionized hydrochloric acid. The
reaction at pH levels typically found in drinking water is:
HOCl + C* > H+ + Cl- + CO*
C* and CO* represent activated carbon and the surface oxide on the
carbon, respectively.

Because the reaction occurs on the carbons surface, its


surface area influences de-chlorination tremendously. Smaller
carbon particle sizes allow quicker access to carbons surface
area, so a 20x50 mesh carbon de-chlorinates more efficiently
than a 12x40 mesh carbon. Both have the same dechlorination capacity given enough contact time, but
dechlorination is faster with the smaller mesh size.
This was shown by a de-chlorination study where the
same feed water was run through four one-inch activated
carbon columns in parallel. The carbons used were
identical with the exception of mesh size. The column with
the smaller particle size was able to maintain the
treatment objective of one ppm chlorine throughout the
entire 60-hour experiment, but water treated by the larger
mesh product exhibited chlorine breakthrough above the
treatment objective after three hours.
This same idea holds true for removal of chloramine,
another type of drinking water disinfectant, but the
reaction between chloramine and carbon is slower. A
larger treatment system or longer contact time is required
for complete chloramine taste and odor control.

Organic Removal
De-chlorination is only half the story. Activated carbon
also removes industrial and agricultural pollutants like
volatile organic compounds (VOCs), synthetic organic
compounds (SOCs) and natural organic matter.

Making Air and Water Safer and Cleaner

UNDERSTANDING CARBON
MESH SIZE
Reprinted with permission from WATER TECHNOLOGY, March 1993

Organics are removed through an adsorption process


rather than a chemisorption process.
Adsorption is a phenomenon by which contaminants are
held to the surface of activated carbon by molecular forces
- the same ones that cause gases to condense to liquids
and solids to precipitate from solutions. The primary
difference in adsorption forces is that they occur between
different molecular species, namely the activated carbon
surface and the contaminant molecule.
Physical adsorption is the primary means by which
activated carbon removes organic contaminants from
water. Carbons highly porous nature provides a large
surface are for contaminants to collect and be held in
place by molecular forces.
Two types of pores exist within activated carbon: transport
pores and adsorption pores. The pores are named for their
function and cover a million-fold size range from a visible
to a molecular scale. The transport pores are the largest
pores within a carbon particle and consists of a variety of
different sizes and shapes. There is approximately a
100,000-fold range of transport pore sizes within an
activated carbon particle. Transport pores are too large to
adsorb, but act as paths to pass contaminants to
adsorption sites.
Adsorption pores are the only
regions in the carbon particle
with significant adsorption
forces or any adsorption
properties. They are the smallest
pores within the carbon particle
and cover only a five-fold range
in size.
To be physically adsorbed, a
contaminant must first migrate
from the outer surface of the
carbon particle through the
maze of transport pores. The
adsorption rate is dictated by
the path which an adsorbate
molecule must take. If the
paths length is decreased by
using a smaller particle size, the
adsorption rate increases; the
faster the adsorption rate, the
more efficient the treatment system.

Mesh size, therefore, has the same effect on organic


adsorption as it does on de-chlorination: decreasing particle
size increases contaminant removal efficiency in applications
where contact time is a controlling factor.
Because contact time in home water treatment devices is
short, mesh size can greatly influence an activated carbon
units performance. Smaller mesh carbons are better suited to
home water filter applications, but higher removal efficiencies
must be balanced against the pressure drops they can create.
IB-1015-05/08

Calgon Carbon Corporation


500 Calgon Carbon Drive
Pittsburgh, PA 15205 USA
+1 800-422-7266
+1 412-787-6700
info@calgoncarbon-us.com

www.calgoncarbon.com

Chemviron Carbon
European Operations of Calgon Carbon
Zoning Industriel C De Feluy
B-7181 Feluy, Belgium
Tel: +32 (0) 64 51 1811
Fax: +32 (0) 64 54 1591

Calgon Carbon Asia PTE LTD


9 Temasek Boulevard
#08-01A Suntec Tower Two
Singapore 038989
Tel: +65 6 221 3500
Fax: +65 6 221 3554

Making Water and Air Safer and Cleaner

You might also like