Kinetics
Kinetics
Kinetics
measure how long these reactions take to reach a certain stage. As a chemical reaction
proceeds, the concentration of the reactants decreases and the concentration of the
products increases. The decrease in the concentration of reactants per unit time, or
the increase in the concentration of products per unit time, is known as the rate of
reaction. The study of rates of reaction is known as kinetics.
SIMPLE COLLISION THEORY
How do chemical reactions take place?
Substances in the liquid, aqueous and gaseous phase consist of particles in rapid and
constant motion. The rate of a chemical reaction depends on three factors:
1.
Collision frequency
If a chemical reaction is to take place between two particles, they must first collide. The
number of collisions between particles per unit time in a system is known as the collision
frequency of the system.
The collision frequency of a given system can be altered by changing the concentration of
the reactants, by changing the total pressure, by changing the temperature or by changing
the size of the reacting particles.
2.
Collision energy
Not all collisions, however, result in a chemical reaction. Most collisions just result in the
colliding particles bouncing off each other. Collisions which do not result in a reaction
are known as unsuccessful collisions. Unsuccessful collisions happen when the colliding
species do not have enough energy to break the necessary bonds. If they do not have
sufficient energy, the collision will not result in a chemical reaction. If they have
sufficient energy, they will react and the collision will be successful. The combined
energy of the colliding particles is known as the collision energy.
Not all the particles in a given system have the same energy; they have a broad
distribution of different energies. The shape of the distribution of energies depends on the
temperature of the system: the higher the temperature, the greater the mean kinetic energy
of the particles.
At a higher temperature T2 the distribution of energies will be different; the mean energy
will be higher and the distribution will be broader:
The greater the mean kinetic energy of the particles, the greater the collision energy.
3.
Activation energy
The minimum energy the colliding particles need in order to react is known as the
activation energy. If the collision energy of the colliding particles is less than the
activation energy, the collision will be unsuccessful. If the collision energy is equal to or
greater than the activation energy, the collision will be successful and a reaction will take
place.
The activation energy can be changed by the addition of a catalyst.
4.
Summary
In reactions that do not happen instantaneously, most collisions are unsuccessful. Such
reactions can be made faster in two ways:
-
The fraction of successful collisions can be shown graphically as the area under the curve
to the right of the activation energy divided by the total area under the distribution curve:
a)
concentration
The greater the concentration of the species in a liquid or gaseous mixture, the greater the
number of species per unit volume and the greater the frequency with which they will
collide. Hence an increase in concentration causes the rate of reaction to increase by
increasing the collision frequency.
The collision energy, activation energy and hence the fraction of successful collisions are
unaffected.
An increase in concentration increases the rate of reaction because
the number of particles per unit volume increases
so the collision frequency increases
b)
pressure
The greater the pressure in a gaseous mixture, the greater the number of species per unit
volume and the greater the frequency with which they will collide. Hence an increase in
pressure causes the rate of reaction to increase by increasing the collision frequency. The
pressure of a system is generally increased by reducing its volume.
The collision energy, activation energy and hence the fraction of successful collisions are
unaffected.
An increase in pressure increases the rate of reaction because
the number of particles per unit volume increases
so the collision frequency increases
c)
particle size
If a sample of a solid is crushed into smaller pieces, the surface area of the solid will
increase. This means that more of the solid particles are exposed to the other reactants
and there is more likely to be a collision. The collision frequency thus increases and the
rate of reaction will increase.
The collision energy, activation energy and hence the fraction of successful collisions are
unaffected.
A decrease in particle size increases the rate of reaction because
the surface area increases
so the collision frequency increases
d)
temperature
collision energy
It is clear that at a higher temperature, the fraction of particles with enough energy
to react increases dramatically and the percentage of collisions which are
successful thus also increases dramatically. The rate of reaction thus increases.
ii)
collision frequency
At a higher temperature, the molecules have more kinetic energy and are thus
moving faster. Thus they collide more often, and the collision frequency
increases. Therefore the rate of reaction also increases.
The increase in rate due to the increase in collision frequency is actually quite
small in comparison to the change due to the increase in collision energy.
Thus the rate of reaction increases when the temperature is increased because the
collision frequency and the collision energy both increase. Of these two reasons, the
increase in collision energy is the most important and accounts for about 95% of the
increase in rate for a given reaction. The activation energy is unchanged.
An increase in temperature increases the rate of reaction because
the mean collision energy of the particles increases
so more of the particles have a collision energy greater than the activation
energy
so the fraction of successful collisions increases
and the particles are moving faster
so the collision frequency increases
On average, a 10oC temperature rise approximately doubles the rate of reaction. The
higher the activation energy, the greater the effect an increase in temperature will have.
e)
catalysts
A catalyst is a substance which changes the rate of a chemical reaction without itself
being chemically altered at the end of the reaction.
Catalysts provide an alternative reaction pathway, usually by introducing an extra step
into the reaction, which has a lower activation energy than the uncatalysed reaction. This
effect can be illustrated with an enthalpy level diagram:
e
n
e
r
g
y
Ea
reactants
products
reaction pathway
e
n
e
r
g
y
uncatalysed reaction
(high activation energy)
reactants
catalysed reaction
(low activation energy)
products
reaction pathway
Since catalysts reduce the activation energy of a chemical reaction, the number of
particles which have sufficient energy to react will therefore increase. This can be shown
graphically by considering the Maxwell-Boltzmann distribution of molecular energies:
On collision
frequency
On collision
energy
No effect
On
activation
energy
No effect
On fraction
On rate
of successful
collisions
No effect
Increases
Decrease particle
size (solids only)
Increases
Increase
concentration
(liquids and gases)
Increase pressure
(gases)
Increases
No effect
No effect
No effect
Increases
Increases
No effect
No effect
No effect
Increases
Increase
temperature
Increases
Increases
No effect
Increases
Increases
Add a catalyst
No effect
No effect
Decreases
Increases
Increases