Bpsolar sx80
Bpsolar sx80
Bpsolar sx80
80-Watt
Multicrystalline Photovoltaic Modules
BP Solars SX series provides cost-effective photovoltaic power for
general use, operating DC loads directly or, in an inverter-equipped
system, AC loads. With 80 watts of nominal maximum power, the BP SX 80
is well-suited to traditional applications of photovoltaics such as telecommunications, remote villages and clinics, pumping, and land-based aids
to navigation. Its 36 series-connected cells charge batteries efficiently in
virtually any climate.
Proven Materials
and Construction
BP Solars quarter-century of field
experience shows in every aspect
of this modules construction and
materials:
Frame strength exceeds requirements of certifying agencies;
36 multicrystalline silicon solar
cells configured as two 18-cell
series strings with two bypass
diodes installed;
Cells are laminated between
sheets of ethylene vinyl acetate
(EVA) and high-transmissivity
low-iron 3 mm tempered glass.
Clear Anodized
Universal Frame
Limited Warranties
Power output for 20 years;
Freedom from defects in
materials and workmanship
for 1 year.
See our website or your local
representative for full terms of
these warranties.
High-Capacity Versatile
Junction Box
The junction box is raintight (IP54
rated) and accepts PG13.5 or 1/2
nominal conduit or cable fittings. Its
volume (411cc, 25 cubic inches) and
6-terminal connection block enable
most system array connections (putting modules in series or parallel) to
be made right in the junction box.
Options include:
oversize terminal block which
accepts conductors up to 25mm2
(AWG #4); standard terminals
accept up to 6mm2 (AWG #10);
BP SX 80
TV
502 [19.75]
11.2 [0.44]
Front view
X
2.3 [0.09]
50 [1.98]
26.9 [1.06]
Section X-X
1456 [57.31]
1461 [57.51]
(includes screwheads)
965 [38.00]
Grounding hole,
2 places.
Back view
Junction box
9.6 [0.38] X 12.7 [0.50] dia.
mtg. holes, typ.
17 [0.69]
245 [9.66]
467 [18.37]
Mechanical Characteristics
Weight
BP SX 80
Dimensions
Unbracketed dimensions are
in milimeters. Bracketed
dimensions are in inches.
Overall tolerances 3mm (1/8")
Grounding Detail
17 [0.69] typ.
BP SX 75
BP SX 80
75W
80W
85W
16.5W
16.8V
17.1V
4.54A
4.75A
4.97A
70W
75W
80W
4.97A
5.17A
5.3A
20.7V
21.0V
21.3V
(0.0650.015)%/C
-(0.50.05)%/C
NOCT
BP SX 85
-(8010)mV/C
472C
600V
Notes
1. These data represent the performance of typical modules in 12V
configuration as measured at their output terminals, and do not
include the effect of such additional equipment as diodes or cables.
The data are based on measurements made in accordance with ASTM
E1036-85 corrected to SRC (Standard Reporting Conditions, also
known as STC or Standard Test Conditions), which are:
illumination of 1 kW/m2 (1 sun) at spectral distribution of AM 1.5
(ASTM E892-87 global spectral irradiance);
cell temperature of 25C.
2. During the stabilization process which occurs during the first few
months of deployment, module power may decrease approximately
3% from typical Pmax.
3. The cells in an illuminated module operate hotter than the ambient
temperature. NOCT (Nominal Operating Cell Temperature) is an indicator of this temperature differential, and is the cell temperature under
Standard Operating Conditions: ambient temperature of 20C, solar
irradiation of 0.8 kW/m2, and wind speed of 1 m/s.
4. U.S. NEC rating.
BP SX 80 I-V Curves
6.0
5.0
T=0C
4.0
T=25C
T=50C
Current (A)
T=75C
3.0
2.0
1.0
0
0
10
15
Voltage (V)
20
25
BP Solar uses recycled and recyclable materials in its operation to the fullest extent.