Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

D11R

Download as pdf or txt
Download as pdf or txt
You are on page 1of 24

D11R

Track-Type Tractor

Cat 3508B Diesel Engine


Gross Power
Flywheel Power
Blade Capacity to

698 kW
634 kW
34.4 m3

935 hp
850 hp
45.0 yd3

Featured machine may include additional equipment


applicable only for special applications. See your
Caterpillar Dealer for available options.

D11R Track-Type Tractor


The D11R combines power and efficiency with advanced technology for outstanding
production at lower cost-per-yard.
Engine
The rugged, easy-to-service Caterpillar
3508B engine has a 25 percent net
torque rise and meets Environmental
Protection Agency (EPA) and CARB
emissions requirements for 2000. The
Electronic Unit Injection (EUI) fuel
system provides fuel efficiency with
automatic air/fuel ratio adjustment and
less smoke. The EUI also improves cold
starting and simplifies electronic
diagnostics. pg. 4

Cooling System
The Advanced Modular Cooling System
(AMOCS) combines more efficient
cooling capacity with easier servicing.
AMOCS allows the machine to be
operated in the most demanding
environments. pg. 5

Operators Station
The comfortable, efficient control deck
encourages top output. Electronic
controls are low-effort and easy-toreach. Cat Contour Series Seat provides
proper support and automotive comfort.
The front, side and rear views from the
seat are exceptional.
pg. 9

Vital Information Display System (VIDS)

The Vital Information Display System


provides the operator with continuous
feedback on machine and system
operation. The reliable, easy-to-read
monitoring system also records
performance data for assistance in
diagnosis and fast troubleshooting.
pg. 10

Power Train/Integration
The power train components have been
enhanced to accommodate increased
load capacity and horsepower. The
Caterpillar Data Link System
electronically combines engine,
transmission and brake information to
optimize overall tractor performance.
pg. 6, 7, 8

Engineered for demanding work.


The D11Rs durable construction is
made for tough working conditions.
It keeps material moving with the
reliability and low operating costs
you expect from Cat machines.

Keypad

The easy-to-use keypad works in


conjunction with the VIDS, allowing the
operator to view details from alert
messages for assistance in diagnosis
and fast troubleshooting.
pg. 11

Electronic Steering and Transmission


Controls
This Caterpillar designed and
manufactured system provides smooth,
one-handed, Finger Tip Control (FTC)
for steering and transmission. Loweffort controls can reduce cycle time for
increased production, while improving
operator comfort.
pg. 12

Automatic Blade Functions and


Ripper Controls
Electro-hydraulic controls feature loweffort buttons and levers which can
increase the productivity of even the
most experienced operators. Operator
can preset blade pitch angle for dig,
carry and dump segments of dozing
cycle. pg. 13

Undercarriage
The elevated sprocket moves the final
drives above the work area, isolating
them from ground impacts. The
suspended undercarriage puts more
track on the ground for higher traction
and less slippage. It absorbs shocks for
a smoother ride and longer machine life.
pg. 15

Work Tools
Tools are matched to the machine for
maximum productivity. A variety of
bulldozer blades, rippers and other
attachments allow you to adapt the
D11R to match your specific
application. pg. 14

Structures
Mainframe is heavy, strong and durable.
Full box sections, steel castings and
continuous rolled rails provide durable
support to the suspended undercarriage,
elevated final drives and other integral
frame components. pg. 16

Serviceability and Customer Support


Major modular component design for
excellent serviceability allows fast
in-field component exchange.
pg. 17-18

New feature

Engine
The 3508B engine, when matched with a field-proven torque divider and power shift
transmission, will provide years of dependable service.

Caterpillar 3508B Diesel Engine with


Electronic Unit Injection (EUI)
performs at rated net power of 634 kW
(850 hp) at 1,800 rpm with a torque rise
of 25 percent and meets EPA and
CARB emissions requirements for 2000.
Turbocharging and aftercooling
provide high horsepower while keeping
rpm and exhaust temperatures low for
long hours of continuous operation.
The Electronic Unit Injection (EUI)
system is a unique and proven highpressure, direct injection fuel system.
This system electronically monitors
operator and sensor inputs to optimize
engine performance and fuel efficiency
by maintaining precise fuel settings.
The EUI system provides higher
injection pressure with shorter duration
for improved fuel economy and reduced
emissions.

Streamlined air system helps improve


combustion system efficiency and
decrease exhaust temperatures.

An aluminum spacer between the block


and head eliminates the need for block
counterbores, extending block life.

Deep crater piston and low crevice


volume provide more efficient
combustion.

Hardened-faced valves, throughhardened crankshaft journals and steelbacked, copper-bonded aluminum


bearings, help assure reliable
performance in the toughest duty.

Automatic engine overspeed control,


actuated hydraulically, helps keep the
operator from overspeeding the engine.
Proven reliability and durability result
by electronically protecting the engine
during cold starts, high-altitude
operation and operation with plugged
air filters.
Engine maintenance and repair is easier
through monitoring key functions and
logging critical indicators. Electronic
diagnostic access is possible with the
Electronic Technician (ET) or
Electronic Control Analyzer
Programmer (ECAP).

Components have longer life because


oil-cooled pistons and full-length,
water-cooled cylinder liners provide
maximum heat transfer. The cylinder
heads also utilize additional coolant
passages to provide maximum cooling
to the engine.
Cat Dealers exchange program for
major engine components can cut repair
time and costs.

Cooling System
Superior cooling in the most demanding work conditions.

Advanced Modular Cooling System


(AMOCS) utilizes an exclusive two-pass
cooling system and increased cooling
surface area to provide significantly
more cooling capacity than
conventional systems.

Two-pass cooling system circulates


coolant from the sectioned bottom tank
(1), up through one side of the cooling
element (2), and down through the other
side (3), returning it to the bottom of the
tank.

Servicing of the AMOCS can be


performed without tilting the radiator
guard.

The cooling elements are individual


core modules that are connected to
a sectioned bottom tank. There is no
top tank to remove.

No need to remove or replace a major


component as on single-core
radiators.
Each core module can be replaced
individually (without removing the
entire radiator), saving considerable
cost and repair time.

Nine steel fins per inch.

Brass tube construction within


each core.

Variable Speed Fan.

Engine Control Module (ECM)


regulates fan speed through
a hydraulic variable displacement
pump.

Increases available horsepower,


reducing parasitic load.

Increases fuel efficiency.

Reduced spectator and operator sound


levels.

Power Train
The D11R power train provides maximum efficiency in combination with the
Caterpillar 3508B Engine.
Torque Divider. A single-stage torque
converter with output torque divider
sends 75 percent of engine torque
through the converter, 25 percent
through a direct drive shaft for greater
driveline efficiency and higher torque
multiplication.
The torque converter shields the
driveline from sudden torque shocks
and vibration.
The more efficient and better matched
torque converter provides high drawbar
pull reserves at converter stall.

1 Ring gear

7
2

2 Flywheel
3 Sun gear

4 Planet gear

5 Turbine

Planetary Power Shift Transmission has


three speeds forward and three speeds
reverse and utilizes large diameter,
high-capacity, oil-cooled clutches.

Modulation system permits fast speed


and direction changes.

Modular transmission and bevel gear


slide into rear case for servicing ease,
even with ripper installed.

Oil-to-water cooler for maximum


cooling capacity.

Forced oil flow lubricates and cools


clutch packs to provide maximum
clutch life.

Controlled throttle shifting regulates


engine speed during directional shifts
for smoother operation and longer
component life.

6 Impeller
7 Output shaft

1
1 Clutch packs

Size of bevel group unit increased for


higher torque.
2
3

2 Ring gear
3 Planet gear
4 Sun gear

Elevated final drives are isolated from


ground and attachment induced impact
loads for extended power train life.
Double-reduction, planetary final drive
gears provide smooth, quiet, low
maintenance operation.
Splash lubrication and Duo-cone Seals
extend service life.
Gears and planet carriers are sized for
higher loads and increased durability.
Axle and spline have been enlarged for
higher torque.
D11R Brakes.
1 Thick, large diameter plates and
disks provide higher torque capacity
and increased service life.
2 Brake housing has cast-in ribs for
more durability and a new valve
design.
3 Cooling oil valve controls 75 gallon
per minute of oil (increase of 78
percent).
4 Clutch disks allow greater torque
capacity on the clutch.
5

5 Tapered roller bearing design


provides increased service life.

3
2

Power Train/Integration
Combining the electronic engine control with the Caterpillar electronic transmission control
allows these critical power train components to work more intelligently.

13
1
3
2

7
8
9

11

12
5

10

4
6

By communicating, these components


work to optimize overall power train
performance, reliability and component
life for reduced power train operating
cost.

Cat Data Link electronically connects


the engine and steering controls for
diagnostic and serviceability ease.
Improved diagnostics and
serviceability are the result of
electronic engine and transmission
controls. The ability to store both active
and intermittent indicators will simplify
problem diagnosis and total repair time,
resulting in improved mechanical
availability and lower operating costs.

Access to diagnostic data is made


easy through the use of a single
service tool ECAP or ET software
package.
ET accesses data stored in the engine
control module via the Cat Data
Link. Information on engine boost
pressure, fuel consumption, engine
speed and transmission shift data can
be retrieved by ET.
ET is also a powerful diagnostic tool.
It replaces 13 mechanical tools to
perform functions like cylinder cutout checks, injector solenoid test, and
timing calibration.

Electronic Technician (ET)

Caterpillar Data Link

Vital Information Display System


(VIDS)

Engine Control Module (ECM)

Variable Speed Fan

Odometer Sensor

Finger Tip Control (FTC)

Electronic Clutch/Brake Control


(ECB)

Electronic Transmission Control


(ETC)

10 Transmission
11 Brakes
12 Automatic Engine Overspeed
Control
13 Electronic Attachment Controls

Operators Station
Designed for comfort and ease of operation.

Clear working view. Angled seat,


tapered hood and notched fuel tank
give the operator a clear line of sight to
the front and rear work areas. Large
single-pane door windows allow the
operator to see close-in to each side
without leaning.

Low-effort Finger Tip Controls (FTC)


are easily accessible and provide
sure, precise maneuvering with
enhanced operator comfort.

The Caterpillar Contour Series Seat


is fully adjustable and designed for
comfort and support. The seat
cushion reduces the pressure on the
lower back and thighs while
allowing unrestricted arm and leg
movement. Retractable 75 mm (3")
wide seat belt provides positive,
comfortable restraints. Padded
armrests are adjustable to
accommodate different size
operators. Air suspension seat
available.

Comfortable, non-tiring operation.


The isolation-mounted cab reduces
noise and vibration, maintaining an
internal sound level under 82 dB(A).
A powerful heater/air conditioner
increases operator comfort. The cab is
prewired for a 12-volt or 24-volt radio,
and equipped with two speakers,
antenna and radio mount recessed in
the headliner.
3

Cat Vital Information Display


System provides instant feedback
to the operator on all critical
machine functions. The system also
records performance data for help
in diagnosis and troubleshooting.

Throttle rocker switch simplifies


operation. High or low idle is
delivered with the touch of a finger.

Electronic dozer control lever.


A low-effort, comfortable-to-grip,
electronic dozer control handle
allows the operator control of all
dozer functions with one hand.

Electronic ripper control. The


rigidly mounted hand grip remains
stable even when ripping in the
roughest terrain.

Computer Aided Earthmoving


System (CAES) optional.

Attachment deactivating switch turns


power off to the dozer and ripper
controls.

Vital Information Display System


Electronic monitoring system continuously watches machine systems and alerts
operator to abnormal conditions.
The Vital Information Display System
(VIDS) provides the operator with
continuous feedback on machine and
system operation, and includes three
levels of operator alert.
The reliable, easy-to-read monitoring
system also records performance data
for assistance in diagnosis and fast
troubleshooting.

The system consists of three display


modules:
1

Gauge cluster module consists of


four electronically driven analog
gauges which display engine
coolant temperature, transmission
oil temperature, hydraulic oil
temperature and fuel level.

Speedometer/tachometer module
includes an analog tachometer,
ground speed and gear/direction
readouts.

10

Message center module provides


a variety of component and system
information through a universal
analog gauge and a digital message
readout display. The switchable
message center allows the operator
to access information on several
machine functions through the
universal gauge, while digitally
displaying the function name, status
and related instructions to the
operator.

Examples of system information are:

Engine oil pressure, engine boost


pressure

Power train oil temperature

Main hydraulic pump pressure, blade


height

In standard operation the first line of


information in the message center is
status and the second line of
information is a selected gauge
parameter.

The alert indicator lamp is also located


on the message center. It is activated by
the main system module and flashes to
indicate a serious or critical abnormal
condition.
An alert alarm is activated by the main
module to sound when a critical
abnormal condition exists.
The keypad allows access to diagnostic
data recorded in the main monitoring
system module and a menu system
which can tailor machine performance
to an individual operator.

Keypad
Activates features at the touch of a key or accesses settings using menu keys.
Keypad allows the operator to access
and acknowledge machine and system
information provided by VIDS, activate
automatic dozer functions, access gauge
values, customize factory settings and
change operator preferences on the
message center module.

The easy-to use keypad works in


conjunction with VIDS, allowing the
operator to view details from alert
messages for assistance in diagnosis
and fast troubleshooting.
The keypad consists of eight active keys
that enable the operator to perform the
following functions:
1

Auto pitch key activates auto pitch


function with on and off toggle
switch and lights up indicator on
panel when enabled.

Float key activates float function


with on and off toggle switch
and lights up indicator on panel
when enabled.

Gauge key accesses message center


gauge analog parameter values.

Set pitch key changes preset blade


pitch angle for load, carry and
dump segments of dozing cycle in
conjunction with auto pitch
function.

Machine set key changes preset


dozer control response to either
standard, fine or fast.

The keypad also contains several utility


keys used in conjunction with the
function keys:

Menu key changes message center


preferences, views acknowledged
and logged machine events,
accesses current machine stats,
shows dozer attachment options,
views test display and calibrates
gauges.

OK key allows the operator to accept


a text prompt or menu choice the
equivalent of answering YES to
a question. It is also used to
acknowledge events and snooze
event notification.

Setup key customizes settings for


up to nine permanent operator ID
accounts, saves shift settings,
recalls setup and clears changes.

Forward and Backward keys allow


the operator to scroll through various
levels of information within a menu.

More key allows the operator to view


greater detail of an event, feature, or
menu selection.

Cancel key cancels the current menu


selection and reverts back to the
previous menu level.

Single tilt key changes operating


mode from dual tilt to single tilt for
improved pryout capability.

11

Electronic Steering and Transmission Controls


Combines steering, machine direction and gear selection into a control system which can be
operated with one hand for enhanced operator comfort and increased productivity.
Finger Tip Controls (FTC) are clustered
for easy, one-handed operation to the
operators left. They control steering,
machine direction and gear selection.
1

1
2

Electronic Clutch and Brake (ECB)


steering system consists of two
small levers which send signals that
control the steering valve.

Levers require less than three


pounds of pull to actuate.

Steering is accomplished in
much the same way as with
traditional clutch and brake
arrangements but with less time
and effort.

ECB system allows the operator to work


more precisely in close areas, around
structures, obstacles, grade stakes, other
machines or on fine grades.
Adjustable operator comfort.
The system is attached to an electrical
linear actuator which allows the FTC
module to be adjusted up and down.
Fore/aft adjustment is controlled by
a manual lever on the front of the
control module.
2

Machine direction is controlled by


a pivoting knob which can be
actuated by the thumb of the left
hand. Rotating the knob up moves
the machine forward. Rotating the
knob down reverses the machine.
The middle setting puts the
machine in neutral.

Gear selection is made by two


buttons to the right of the machine
direction knob. The top (up-shift)
button shifts the machine
transmission to the next higher gear
while the bottom (down-shift)
button shifts to the next lower gear.

Parking brake switch


electronically locks ECB system
and transmission control.

12

Automatic shifting features easier


upshifts and downshifts which can
increase operator productivity, reduce
fatigue, and shorten cycle times.

Operators can choose between manual


shifting or the Automatic shifting
feature, depending on the application
and/or operators preference.
Auto Shift allows the operator to preset
a forward and reverse gear for frequent
directional changes. Auto Shift settings
include first forward to second reverse.

Automatic Blade Function and Ripper Controls


Low-effort, automatic control functions significantly reduce operator fatigue for
increased performance.

2
4
1

3
Automated Blade Assist (ABA) is a semi-automatic dozer
control function that increases efficiency and reduces operator
workload by automating some of the more common blade
functions. The ABA system for a dual-tilt tractor consists of
AutoPitch.

Thumb button selects doze segment. First hit actuates


carry (lays the blade back), second hit actuates auto dump.

Thumb button returns blade pitch to ready to carry.

Auto pitch indicator.

AutoPitch allows the operator to preset blade pitch angles for


optimal performance during the dozing cycle: one setting each
for load, carry, spread and return. Once the AutoPitch key is
activated on the VIDS keypad, the operator can then select the
dozing segment by pushing the yellow button on the left side
of the dozer handle.

A set of operator preferences can individually take and


sort through nine ID accounts via an easy-to-use keypad.

Float indicator.

Single tilt indicator.

Ripper control
7

Rigidly mounted hand grip provides firm support for the


operator even when ripping in the roughest terrain.

Low-effort thumb lever controls ripper raise and lower.

Low-effort finger lever controls shank in and shank out


positioning.

10 Thumb button activates auto raise and stow feature.

9
8
7

10

13

Work Tools
A variety of attachments provides the flexibility to match the machine to the job.

Bulldozers. The 11SU blade, rated at 27.2 m3 (35.5 yd3) and


the 11U blade at 34.4 m3 (45.0 yd3) make full use of D11R
power.

Rippers. Single and multi-shank rippers are made to penetrate


tough material fast and rip thoroughly for use in a variety of
materials.

Dual-tilt improves load control. Allows the operator to


optimize the blade pitch angle for each portion of the dozing
cycle. Single lever controls all blade movements, including
dual-tilt.

Single-shank Ripper.

Two position tilt cylinder mounting for increased flexibility


for your specific application.
Cutting edges are DH-2 steel. End bits are DH-3 to provide
maximum service life in tough materials.
Tilt cylinder lines are routed along outside of tag-link for
improved serviceability.

Operator can adjust the shank depth from the seat using an
optional single-shank pin puller.

Large ripper frame view hole improves viewing of


ripper tip.

Heat treated, cast spacer bars in ripper carriage help to


extend pocket life and reduce shank notching.

Large, one-piece shank.

Available in deep rip configuration.

Multi-shank ripper tailors the tractor to the material by using


one, two or three shanks.
Hydraulic pitch adjustment cylinders vary the shank angle to
get the best penetration so the material is lifted and shattered.
Straight pin mountings enhance serviceability for installation
and removal.
Ripper hydraulic lines group uses Caterpillar's XT-3 hoses for
durability and reliability in tough applications.
Pin puller hydraulic hoses routed along lift cylinder to
increase service life and hoses are larger in diameter to
increase response time for cold weather operation.
Rear counterweights provide proper tractor balance to
maximize dozing production. Recommended if other rear
attachment not specified.
Remote lube provides improved access to grease mainframe
and to ripper frame pin joint.

14

Undercarriage
The Caterpillar elevated sprockets are designed for better machine balance and
component life.

Suspended undercarriage design


absorbs impact loads to reduce the shock
loads transferred to undercarriage by up
to 50 percent.

Roller frames are tubular, to resist


bending and twisting, with added
reinforcement where operating loads are
the highest.

Bogie suspension conforms more


closely to the ground to provide up to 15
percent more ground contact, especially
in hard, uneven terrain. Higher traction
means less slippage, better balance and a
smoother ride.

Sprockets have five bolt-on replaceable


rim segments of abrasion resistant steel
for long wear life.

Roller frames attach to tractor by a


pivot shaft and pinned equalizer bar.
Large pivot shaft bushings operate in
an oil reservoir.
A low friction, no maintenance
bushing is used in the saddle
connection.

Resilient pads restrain equalizer bar


oscillation.

The recoil system is sealed and


lubricated.

Patented alignment design increases


undercarriage wear life.

Idler guards (optional) increase


undercarriage life.

Track adjustment provided to 120


percent undercarriage wear limit.

Positive pin retention sealed and


lubricated track permanently coats
the track pin with a sealed-in
lubricant, minimizing metal-tometal contact.

Virtually eliminates internal pin


and bushing wear.

Lubricant is held in a reservoir in


the track pin.

Coated track bushing maximizes


sealability.

Stronger track link resists high


impact loads.

15

Structures
Engineered to provide durability and the solid support necessary for maximum
production and service life.

6
2
4

3
8

5
1
2
5
2

Mainframe strength. The D11R


mainframe is built to absorb high impact
shock loads and twisting forces.
1

16

Frame rails are full, box-section


designed to keep components
rigidly aligned.
Heavy steel castings give added
strength to the main case, equalizer
bar saddle, front cross member and
tag-link trunnion.
The top and bottom rails are
continuous rolled sections with no
machining or welding necessary.
This provides superior mainframe
durability.

The main case elevates the final


drives well above the ground level
work area to protect them from
impact loads, abrasion and
contaminants.

A pivot shaft and pinned equalizer


bar maintain track roller frame
alignment.

Case and frame design features onepiece cast case with ripper and
ROPS mounting. Oil reservoir
included in one-piece cast casting.

Heavy cast saddle with ribs


increases frame life.

Radiator guard mounts, engine


mounts and tag-link connection
utilizes one-piece cast front support
to reduce the amount of welding in
the front section of the frame.

Tag-link construction has fewer


parts for reduced wear and brings
the blade closer to the machine for
more precise dozing and load
control.

Tag-link design provides solid


lateral stability and better
cylinder positions for constant
pryout independent of blade
height.

Serviceability
Major modular component design allows fast infield component exchange, lowering
time spent on maintenance.
Built-in servicing ease. Less service
time means more working time. Major
components are made as modules and
most can be removed without disturbing
or removing others.
Air conditioner core can be cleaned
without disconnecting line.
Air conditioner unit uses positive air
pressure to help prevent dust and dirt
entry.
Advanced Modular Cooling System
individual cooling elements allow
radiator servicing without major
component removal, reducing
considerable downtime and cost.
Quick disconnect fittings allow for fast
diagnosis of the power train and
attachment oil systems.
Diagnostic connector allows connection
to Electronic Technician (ET) or ECAP.
This connection gives capability of
troubleshooting engine, obtaining total
fuel usage history and other data stored
in the Electronic Control Module.
A second diagnostic connector allows
the Cat Dealers electronic test
instrument to quickly troubleshoot the
electrical system.
Pressure test points for power train and
hydraulic systems are provided.
Grouped service points and excellent
access to service areas make routine
checks fast and convenient.

Ecology drains provide an


environmentally safer method to drain
fluids. They are included on the radiator,
hydraulic tank and major power train
components.

Oil change system optional for quick


service to engine and power train oil.
Tilt cylinder lines are routed on the
outside of the tag-link for better ease of
service.

Scheduled Oil Sampling made easier


through live sampling ports for the
engine, power train and hydraulics.

Quick, easy service access and


inspection of daily maintenance items.
Caterpillar remanufactured dozer
hydraulic cylinders and rods, starters,
alternators, cylinder heads, short blocks,
engines, oil pumps and final drive hubs
are available for fast, economical
repairs.
Caterpillar Vital Information Display
System analyzes critical temperatures
and pressure, giving visual and audible
warning for fast troubleshooting.

17

Total Customer Support


Unmatched in the industry!
Your Cat Dealer offers a wide range of
services that can be set up under a
customer support agreement when you
purchase your equipment. The dealer
will help you choose a plan that can
cover everything from machine and
attachment selection to replacement to
help you get the best return on your
investment.
Selection. Make detailed comparisons of
the machines you are considering before
you buy. How long do components last?
What is the cost of preventive
maintenance? What is the true cost of
lost production? Your Cat Dealer can
give your precise answers to these
questions.
Purchase. Look past initial price.
Consider the financing options available
as well as day-to-day operating costs.
This is also the time to look at dealer
services that can be included in the cost
of the machine to yield lower equipment
owning and operating costs over the long
run.
Operation. Improving operating
techniques can boost your profits. Your
Cat Dealer has training videotapes,
literature and other ideas to help you
increase productivity.

18

Machine management services.


Cat Dealers help manage
equipment investments with:

Custom Track Service.

Effective preventive maintenance


programs.

Diagnostic programs like Scheduled


Oil Sampling and Technical Analysis.

Information to make the most cost


effective repair option decisions.

Customer meetings, training for


operators and mechanics.

Replacement. Repair, rebuild or


replace? Your Cat Dealer can help you
evaluate the cost involved so you can
make the right choice.
Product support. You will find nearly all
parts at our dealer parts counter. Cat
Dealers utilize a world-wide computer
network to find in-stock parts to
minimize machine down-time. Save
money with remanufactured parts. You
receive the same warranty and reliability
as new products at a cost savings of 40
to 70 percent.

Engine

Transmission

Four-stroke cycle, 60 V8, Cat 3508B Diesel Engine.

Planetary power shift with three speeds


forward and reverse.

Ratings at 1800 rpm*


Gross power
Flywheel power

kW

hp

Features

698
634

935
850

The following ratings apply at 1800 rpm


when tested under the specified standard
conditions for the specified standard:
Net power
Caterpillar
ISO 9249
ISO 3046-2
EEC 80/1269
Dimensions
Bore
Stroke
Displacement

kW

hp

634
634
634
634

850
850
850
850

170 mm
190 mm
34.5 liters

6.7"
7.5 "
2105 in3

D11R Drawbar Pull


kg x
1000

lbs x
1000
350

150
140
300
130

120

Drawbar Pull

110

250

1st Gear

100
90

200

80
70

150

60

2nd Gear

50
100
40

3rd Gear

30
20

50

10
0

0
0

10

8 mph

12

km/h

Tractor Speed

*Power rating conditions

meets EPA and CARB emissions


requirements for 2000
heavy cast modular iron block with
extensive ribbing for reduced internal
stress
Electronic Unit Injection (EUI) for
increased reliability, reduces
particulate emissions, better starting,
optimum fuel consumption, easy
diagnostics
parallel manifold porting with two
intake and two exhaust valves per
cylinder. Hardened-faced valves,
hardened-alloy steel seats and valve
rotators
cam-ground and tapered, two-piece
ferrous/aluminum pistons with three
rings, cooled by oil spray
steel-backed, copper-bonded,
aluminum bearings, through-hardened
crankshaft journals
pressure lubricated with full-flow
filtered and cooled oil
dry-type air cleaner with primary and
secondary elements
24-volt, direct-electric starting system,
100-amp alternator with two 12-volt,
244 amp-hour batteries
engine/torque divider module is
isolation mounted to the main frame
reducing machine vibration and
structure-radiated noise
water-cooled turbocharger bearing for
longer life

based on standard conditions of 25C


(77F) and 99 kPa (29.32 in Hg) dry
barometer
used 35C API gravity fuel having an
LHV of 42 780 kJ/kg (18,390 Btu/lb)
when used at 30C (86F) [ref. a fuel
density of 838.9 g/L (7.001 lb/
U.S. gal)]
net power advertised is the power
available at the flywheel when the
engine is equipped with fan, air
cleaner, muffler and alternator
no derating required up to 2286 m
(7,500 ft) altitude beyond 2286 m
(7,500 ft) automatic derating occurs

Final Drives
Double reduction planetary final drive
gears with tapered roller bearings.

Speed

Forward

Reverse

1
2
3
1
2
3

km/h

mph

3.9
6.8
11.8
4.7
8.2
14.0

2.4
4.2
7.3
2.9
5.1
8.7

Features

special modulation system permits


fast speed and direction changes
533 mm (21") diameter, high torque
capacity oil-cooled clutches
exclusive F 37 friction material for
excellent life
modular transmission, bevel gear and
differential plug into rear of main
drive case
two oil-to-water coolers mounted
under radiator
single-stage torque converter with
output torque divider
double universal joint eases service

Service Refill Capacities


L

Fuel tank
1609
Cooling system
238.8
Engine crankcase
106
Power train
344
Final drives (each)
30
Roller frames (each)
95
Pivot shaft compartment
51
Implement hydraulic
system tank only
227.8

Gallons

425
63
28
91
8
25.1
13.5
60

Weight

Features

Maximum travel speeds

splash lubricated and sealed with


Duo-cone floating ring seals
sprockets have five bolt-on,
replaceable rim segments with more
bolts to resist high impact loads
eliminate ground and implement
induced impact loads for extended
power train life
abrasion resistant steel increases
sprocket segment wear life

(approximate)
Shipping:

(Includes lubricants, coolant, 20 percent


fuel and ROPS with FOPS cab) 74 182 kg
(163,200 lb)
Operating:

[Includes lubricant, coolant, full fuel


tank, hydraulic controls and fluids,
810 mm (32 in) extreme service shoes,
11U ABR bulldozer, single-shank ripper
with pin puller and fast fuel, engine
doors (optional equipment) and operator
104 590 kg (230,100 lb)]

D11R Track-Type Tractor specifications

19

Cab
Caterpillar cab and Rollover Protective
Structure (ROPS) are standard in North
America, Europe, and Japan.

Track Roller Frame

Sealed and Lubricated


Track

Lifetime lubricated rollers and idlers


resiliently mounted to roller frame by
a series of bogies.

Positive Pin Retention (PPR) for extra


protection of track seal in high impact
conditions.

Features

Features

meets OSHA and MSHA limits for


operator and sound exposure with
doors and windows closed (according
to ANSI/SAE J1166 MAY90)
ROPS meets the following criteria:
SAE J394
SAE J1040 APR88
SAE J1040 MAY94
ISO 3471-1; 1986
ISO 3471-1; 1994
also meets the following criteria for
Falling Objects Protective Structure
(FOPS):
SAE J231 JAN81
ISO 3449; 1992 LEVEL II

Pitch
Number shoes/side
Shoe type
Width of shoe
Length of track
on ground
Ground
contact area
Grouser height
(from ground
face of shoe)
Ground clearance
Gauge

318 mm

12.5"
41
Extreme service
710 mm
28.0"

4444 mm 14' 7"


6.3 m2
9,781 in2

102 mm
623 mm
2896 mm

4.0"
24.5"
9' 6"

tubular design resists torsional loads


bogies oscillate on sealed and
lubricated cartridge pin connections,
travel controlled by resilient pads
roller frame attaches by a pivot shaft
and fully pinned equalizer bar
eight rollers per side
large pivot bushings operate in an oil
reservoir
equalizer bar-roller frame ball joint
pins and high capacity bearings have
improved seal and operate in oil
reservoir; saddle connection is a lowfriction, no-maintenance bushing
improved center bearing in equalizer
bar for improved life, improved
corrosion resistance, and easier to
remove
recoil system is fully sealed and
lubricated
oscillation of 362 mm (14.3 in)
large idler caps with three-bolt
mounting
improved track roller frame alignment
increased track adjustment

Note: When properly installed and


maintained, the cab offered by Caterpillar
when tested with doors and windows
closed according to ANSI/SAE J1166
MAY90, meets OSHA and MSHA
requirements for operator sound exposure
limits in effect at time of manufacture. The
operator sound pressure level is under 82
dB(A) when measured per ISO 6394 or
86/662/EEC.

Features

Steering and Brakes

Hydraulic Controls

Electronic Finger Tip Controls (FTC)


combine steering clutch disengagement
and braking for each track. Pull back
slightly to disengage steering clutches,
fully back to brake track.

Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage
and control levers.

low-effort, Finger Tip Controls for


steering
hydraulically applied multiple-disk
clutches
high capacity brakes are hydraulically
released, spring applied, and have
computerized electronic brake control
for excellent brake modulation
single pedal simultaneously applies
brakes to tracks for fast stops
parking brake applied electronically,
which engages parking brake and
locks the Finger Tip Controls
increased capacity (50 percent greater
power dissipation)
larger diameter disks (24 in vs
18.25 in)

20

lubricant reduces internal bushing


wear
hydraulic track adjusters, track
guiding guards and large, positiveclamping, two-piece master link are
standard
improved track joint sealability
stronger track link to resist high
impact loads

Attachments Gear-type pump


Output at 1890 rpm and
6895 kPa (1000 psi)
Tilt cylinder flow
Relief valve settings
Bulldozer
Tilt cylinder
Ripper (lift)
Ripper (pitch)

620 liters/min
155 liters/min

164 gpm
41 gpm

22 750 kPa
24 300 kPa
22 750 kPa
22 750 kPa

3300 psi
3525 psi
3300 psi
3300 psi

Electro-hydraulic pilot valves assist operations of ripper and dozer tilt controls.
Standard hydraulic systems include two valves for 11SU or 11U bulldozer and tilt.
Optional hydraulic component

Two additional valves for ripper function:


hydraulic shank pitch adjustment
adds 122 kg (268 lb)

D11R Track-Type Tractor specifications

Dimensions
All dimensions are approximate.
With attachments add to overall machine length:
Single-shank ripper
1850 mm
Single-shank ripper
with push block
2190 mm
Multi-shank ripper
1915 mm
11SU Dozer
2220 mm
11U Dozer
2668 mm

6' 1"
7' 2.2"
6' 3.4"
7' 3.4"
8' 9"

Width over trunnions


Drawbar height (centerline
of clevis) from ground
face of shoe

4365 mm

14' 4"

777 mm

30.6"

Note: model shown equipped with 710 mm (28") shoes.

3259 mm
(10' 8")

4397 mm
(14' 5")
4546 mm
(14' 11")
3605 mm
(11' 10")

4657 mm
(15' 3")

2829 mm
(9' 3")

623 mm
(24.5")

1987 mm
(6' 6")

2896 mm
(9' 6") Gauge

6163 mm
(20' 3")

3602 mm
(11' 10")

10 825 mm
(35' 6")

6358 mm
(20' 10")

Bulldozers
Tag link dozer coupling brings blade closer for better balance and control.
Blade
Blade capacity (SAE J1265)
Width with blade (over end bits)
Blade height
Digging depth
Ground clearance
Maximum tilt
Weight*
Total operating weight** (with blade
and single-shank ripper)

m3
yd3
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
kg
lb
kg
lb

11SU ABR
27.2
35.5
5600
18' 4"
2370
7' 9"
766
30.2
1533
5' 0"
1184
3' 11"
16 192
35,698
101 955
224,300

* Does not include hydraulic controls but includes blade


cylinders.
** Includes blade and single shank ripper, hydraulic controls,
blade cylinders, coolant, lubricants, full fuel tank, 810 mm
(32 in) shoes, ROPS/FOPS cab and operator.

11U ABR
34.4
45.0
6358
20' 10"
2370
7' 9"
766
30.2
1533
5' 0"
1344
4' 5"
18 823
41,498
104 590
230,100

11SU
27.2
35.5
5600
18' 4"
2370
7' 9"
766
30.2
1533
5' 0"
1184
3' 11"
14 813
32,658
100 573
221,260

11U
34.4
45.0
6358
20' 10"
2370
7' 9"
766
30.2
1533
5' 0"
1344
4' 5"
17 296
38,131
103 060
226,733

Features
dual-tilt is standard for improved blade loading, carrying
and dumping
cutting edges are DH-2 steel and end bits are DH-3 steel
for maximum durability
dozer lift cylinders mount to top corners of radiator guard
to improve mechanical advantage
single lever controls all blade functions
aggressive heel clearance for improved blade penetration

D11R Track-Type Tractor specifications

21

Rippers
Redesigned ripper frame for improved viewing of ripper tip.
Hydraulic tip adjustment cylinders vary shank angle to aid penetration and help lift and shatter rock.

Overall beam width


Maximum penetration force*
(shank vertical)
Maximum penetration
(standard tip)
Pryout force
(multi-shank ripper with
one tooth)
Maximum clearance raised
(under tip, pinned in
bottom hole)
Number of shank holes
Weight
(without hydraulic controls)
Total operating weight**
(with 11U ABR blade
and ripper)

mm
ft/in

Single-shank

Single-shank,
Deep Ripping
Arrangement

kN
lb

288
64,800

292
65,644

277
62,325

mm
ft/in

1612
5' 3"

2172
7' 2"

1070
3' 6"

+Multi-shank
Arrangement
3330
10' 11"

kN
lb

660
148,500

657
147,772

646
145,350

mm
in

1115
43.9"
4

878
34.6"
3

1137
44.8"
2

kg
lb

9643
21,215

10 022
22,050

9698
21,335

kg
lb

104 590
230,100

104 970
230,935

104 485
229,867

* Specifications are converted from


British to metric measure and
rounded.
** Operating weight includes lubricant,
coolant, full fuel tank, hydraulic
controls, 810 mm (32 in) extreme
service shoe, ROPS/FOPS cab, and
operator.
+
Includes one shank. Add 671 kg
(1,489 lb) for each additional shank.

Note: Single-shank, deep ripping


arrangement weight includes
required pin puller.

Features

optional single-shank pin puller


lets operator adjust shank depth
from seat
large, one-piece shank
multi-shank ripper allows variable
use of one, two or three shanks to
match job conditions

Standard Equipment
Standard and optional equipment may vary. Consult your Caterpillar Dealer for specifics.
Electrical

Alarm, back-up
Alternator, 100-amp
Batteries, 12-volt (4), 190 amp-hour
Converter, 12-volt, 5 amp
Deutsch electrical connectors
Diagnostic connector (3)
Horn, forward warning
Lighting system, Halogen
(2 forward, 2 rear)
Receptacle, starting
Operator Environment

Armrests, adjustable
Attachment control lever lockout switch
Cat VIDS with fuel gauge, temperature
gauges, tachometer, odometer, hour
meter and diagnostic code readout
Decelerator and governor switch
Electronic controls
Finger Tip Control (FTC) steering
Heater
Radio-ready cab
Rearview mirror

22

ROPS/FOPS sound suppressed cab


with rollbar
Seat, adjustable contour suspension
Seat belt, retractable

Power shift transmission (3 speed)


Precleaner with dust ejector
Torque divider
Undercarriage

Power Train

3508B Diesel Engine:


24-volt electric start
Air cleaner with precleaner (2)
Electronic Unit Injection (EUI)
Ether starting aid, automatic
Fuel priming pump
Muffler with rain cap (2)
Turbocharged/aftercooled
Advanced Modular Cooling System
(AMOCS)
Blower fan with hydraulic demand drive
Clutch and brake system, electronic
Controlled throttle shifting
Drains, ecology fluid
Electronic transmission control module
Parking brake, electronic
Planetary final drives, 4-planet,
double-reduction

D11R Track-Type Tractor specifications

Grousers, 710 mm (28") extreme


service, with sealed and lubricated
PPR track (41 section)
Hydraulic track adjusters
Suspension-type undercarriage,
8-roller tubular track roller frame
Track guides
Other Standard Equipment

Dual-tilt blade control


Guards:
Bottom, extreme service, hinged,
with front towing device
Hinged radiator
Hinged power train
Pilot-operated, two-valve hydraulic
system for bulldozer control
Vandalism protection (8 caplocks)

Optional Equipment
(with approximate change in operating weight)
kg

lb

kg

Air conditioner (R134a)


50
Air conditioner, ROPS mounted (R134A)
164
Bulldozers:
11SU Abrasion (includes tilt cylinders,
wear plates, rock guard and extended
wear life cutting edges)
16 192
11U Abrasion (includes tilt cylinders,
wear plates, rock guard and extended
wear life cutting edges)
18 823
11SU (removes wear plates, rock guard
and extended wear life cutting edges.
Adds push plate.)
14 813
11U (removes wear plates, rock guard
and extended wear life cutting edges) 17 296
Converter, Aux. 24-volt to 12-volt
2.7
Counterweight:
*Rear mounted (basic)
4990
*Rear mounted (additional weight)
2268
Cylinder, single-tilt (dual-tilt is standard)
-21
Engine enclosure
97
Fan, defroster
6.8
Fast-fill fuel system for use with:
Counterweight
22
Ripper
34
Guard, rear hitch and transmission
1618
Guards, undercarriage
34
Heater, engine coolant (120-volt or 240-volt)
1.4
Heater, fuel
7.7

110
360

Hydraulic controls for ripper


(two additional valves)
122
Lights, supplemental
2 front
10
2 rear
11
Oil change system for quick service to engine 1.8
Operator arrangement, modified
(improves visibility and comfort
for smaller operators)
24
Pin puller (for single-shank ripper)
100
Pin puller, hydraulic control
5
Prelubrication system, engine
8.2
Pushblock (for single-shank ripper)
145
*Rippers:
Single-shank, standard arrangement
9643
Single-shank, deep ripping (requires
pin puller and hydraulic controls)
10 022
Multi-shank (includes one shank)
9698
Ripper shank, additional
(for multi-shank ripper)
671
Roller, carrier
327
Seat, air suspension

Seat, vinyl
1
Sound suppression, spectator

Tracks, pair, sealed and lubricated:


810 mm (32 in), PPR Extreme Service
831
910 mm (36 in), PPR Extreme Service
1703

35,698

41,498

32,658
38,131
6
11,000
5,000
-46
214
15
48
58
3,568
75
3
17

lb

268
20
24
4

54
220
11
18
320
21,215
22,050
21,335
1,498
720

1,831
3,754

*A rear attachment and/or counterweight is recommended for improved performance and balance.

D11R Track-Type Tractor specifications

23

D11R Track-Type Tractor

AEHQ5242-01 (10-99)
(Replaces AEHQ5242)

www.CAT.com
1997,1999 Caterpillar
Printed in U.S.A.
Materials and specifications are subject to change without notice.

You might also like