Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 98 views

    Mounting Instructions: Shock Absorber For BMW R1200 GS, Rear

    Uploaded by

    Ivan Tl
    The document provides instructions for installing an Öhlins shock absorber on a BMW R1200 GS motorcycle. It lists the kit contents and provides steps and warnings for removing the original shock and installing the Öhlins unit. It also gives set-up data and adjustment information for the new shock absorber.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mounting Instructions: Shock Absorber For BMW R1200 GS, Rear

    Uploaded by

    Ivan Tl
    98 views4 pages
    The document provides instructions for installing an Öhlins shock absorber on a BMW R1200 GS motorcycle. It lists the kit contents and provides steps and warnings for removing the original shock and installing the Öhlins unit. It also gives set-up data and adjustment information for the new shock absorber.

    Original Description:

    hge

    Original Title

    MI_BM436

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for installing an Öhlins shock absorber on a BMW R1200 GS motorcycle. It lists the kit contents and provides steps and warnings for removing the original shock and installing the Öhlins unit. It also gives set-up data and adjustment information for the new shock absorber.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    98 views4 pages

    Mounting Instructions: Shock Absorber For BMW R1200 GS, Rear

    Uploaded by

    Ivan Tl
    The document provides instructions for installing an Öhlins shock absorber on a BMW R1200 GS motorcycle. It lists the kit contents and provides steps and warnings for removing the original shock and installing the Öhlins unit. It also gives set-up data and adjustment information for the new shock absorber.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Before installing this product, check the contents

    of the kit. If anything is missing, please contact


    an hlinsdealer.
    Kit Contents

    Shock Absorber
    Washer
    Screw MC6S 6x16
    Screw MC6S 8x16
    Bracket
    Bracket
    hlins Sticker
    Memo Notes Sticker
    Owners Manual

    Part No. Pcs.


    BM436
    1
    00153-01 2
    01046-01 2
    01046-22 1
    02267-05 1
    02267-06 1
    00192-01 2
    01180-01 1
    07241-02 1

    Please note that during storage and


    transportation, especially at high ambient
    temperature, some of the oil and grease used for
    assembling may leak and stain the packaging.
    This is in no way detrimental to the product,
    wipe off the excessive oil/grease with a cloth.

    Warning!

    Before installing this product, read the hlins


    Owners Manual. The shock absorber is an
    important part of your vehicle and will affect the
    stability.

    Shock Absorber for BMW R1200 GS, Rear

    BM 436

    Mounting Instructions

    How to Install
    Remove the upper shock absorber bolt.

    Warning!

    It is advisable to have an hlins dealer install


    the shock absorber.

    6
    Remove the original shock absorber from the
    left side of the motorcycle.

    When installing, read the Vehicle Service


    Manual.

    Note!

    Before installing the hlins shock absorber


    clean the vehicle thoroughly.

    1
    Put the motorcycle on a workstand so that
    the rear wheel barely touches the ground.
    The swing arm must be free so that the
    suspension is unloaded.

    7
    Install the hlins shock absorber in the same
    way as the original unit.

    Warning!

    Note!

    Make sure the vehicle is securely supported so

    Lower the motorcycle so that the shock


    absorber is sligthly compressed, before
    tightening the screws.
    8
    Install the preload adjuster brackets to the

    1
    that it will not tip.
    2
    Unlock the seats. Remove the passenger and
    driver seats.
    3
    Loosen the silencer and remove it.

    Note!

    If the motorcycle has the ESA shock absorber


    system; Disconnect the electrical connectors
    from the shock absorber. Make sure that the
    electrical connectors on the motorcycle are
    safe from contact with water.
    4
    Remove the lower shock absorber bolt.
    5

    How to Install
    frame. Use the M6 screws provided in this kit.

    Make sure that the hose runs in soft turns.

    9
    Install the preload adjuster from the insdie.
    use the M8 bolt and washers provided in this
    kit.

    10
    Reinstall the seats. Make sure that all
    removed parts are reinstalled in the same way
    as they were before the installation.

    Caution!

    Caution!

    Make sure that all screws are tightened to the


    correct torque and that nothing fouls or restricts
    movement of the shock absorber when the
    suspension is fully compressed or extended.

    Adjustments
    Warning!

    Before riding, always make sure that the


    basic settings made by hlins are according
    to recommended Set-up Data. Read about
    adjustments and setting up in the hlins
    Owners Manual before you make any
    adjustments. Contact an hlins dealer if you
    have any questions about setting up the shock
    absorber.
    Spring Preload
    Adjuster
    Rebound Damping

    Set-up Data
    Recommended set-up
    Rebound
    Spring Preload

    14 clicks
    19 mm

    Free Sag and Ride Height


    R1 - R2 5 - 15 mm
    R1 - R3 25 - 35 mm
    F1 - F2 40 - 50 mm
    F1 - F3 55 - 65 mm

    Shock absorber data


    Length
    403 mm
    Stroke
    78.5
    Read about Free Sag and Ride height in
    Spring 00698-54
    the hlins Owners Manual.
    Spring, free length
    230 mm
    Spring rate
    140 N/mm

    hlins products are subject to


    continuous improvement and
    development, therefore, although
    these instructions include the most
    up-to-date information available at
    the time of printing, minor updates
    may occur.

    To find the latest information


    contact your hlins distributor.
    Please consult your hlins dealer if
    you have any questions regarding
    the contents in this document.

    hlins Racing AB. All rights


    reserved. Any reprinting or
    unauthorized use without the written
    permission of hlins RacingAB
    is prohibited.

    hlins Racing AB
    Box 722
    S-194 27 Upplands Vsby, Sweden
    Phone +46 8 590 025 00
    fax +46 8 590 025 80

    Part no. BM436_2


    Issued 2014-08-27

    www.ohlins.com

    You might also like