General Description: 4Q Triac

SO
T2
23
BT134W-600
4Q Triac
12 June 2014
Product data sheet
1. General description
Planar passivated four quadrant triac in a SOT223 surface-mountable plastic package
intended for use in applications requiring high bidirectional transient and blocking voltage
capability and high thermal cycling performance.
2. Features and benefits
High blocking voltage capability

High noise immunity suitable for noisy applications
Planar passivated for voltage ruggedness and reliability
Surface-mountable package
Triggering in all four quadrants
3. Applications
General purpose low power motor control

General purpose switching and phase control
4. Quick reference data

Table 1.
Quick reference data
Symbol
Parameter
VDRM
Conditions
Min
Typ
Max
Unit
repetitive peak offstate voltage
600
ITSM
non-repetitive peak on- full sine wave; Tj(init) = 25 C;

state current
tp = 20 ms; Fig. 4; Fig. 5
10
IT(RMS)
RMS on-state current
35
mA
35
mA
11
35
mA
full sine wave; Tsp 108 C; Fig. 1;

Fig. 2; Fig. 3
Static characteristics
IGT
gate trigger current
VD = 12 V; IT = 0.1 A; T2+ G+;

Tj = 25 C; Fig. 7
VD = 12 V; IT = 0.1 A; T2+ G-;
Tj = 25 C; Fig. 7
VD = 12 V; IT = 0.1 A; T2- G-;
Tj = 25 C; Fig. 7
Scan or click this QR code to view the latest information for this product
BT134W-600
NXP Semiconductors
4Q Triac
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VD = 12 V; IT = 0.1 A; T2- G+;
30
70
mA
Tj = 25 C; Fig. 7
5. Pinning information
Table 2.
Pinning information
Pin
Symbol Description
T1
main terminal 1
T2
main terminal 2
gate
T2
main terminal 2
Simplified outline
Graphic symbol
T2
sym051
T1
G
SC-73 (SOT223)
6. Ordering information
Table 3.
Ordering information
Type number
BT134W-600
Package
Name
Description
Version
SC-73
plastic surface-mounted package with increased heatsink; 4

leads
SOT223
7. Marking
Table 4.
Marking codes
Type number
Marking code
BT134W-600
BT134W 60
BT134W-600
Product data sheet
All information provided in this document is subject to legal disclaimers.
12 June 2014
NXP Semiconductors N.V. 2014. All rights reserved
2 / 13
BT134W-600
NXP Semiconductors
4Q Triac
8. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
VDRM
repetitive peak off-state voltage
IT(RMS)
RMS on-state current
full sine wave; Tsp 108 C; Fig. 1;
Min
Max
Unit
600
10
11
Fig. 2; Fig. 3
ITSM
non-repetitive peak on-state

current
full sine wave; Tj(init) = 25 C;

tp = 20 ms; Fig. 4; Fig. 5
full sine wave; Tj(init) = 25 C;
tp = 16.7 ms
I t
I2t for fusing
tp = 10 ms; SIN
0.5
A s
dIT/dt
rate of rise of on-state current
IT = 1.5 A; IG = 0.2 A; dIG/dt = 0.2 A/s;
50
A/s
50
A/s
50
A/s
10
A/s
T2+ G+
IT = 1.5 A; IG = 0.2 A; dIG/dt = 0.2 A/s;
T2+ GIT = 1.5 A; IG = 0.2 A; dIG/dt = 0.2 A/s;
T2- GIT = 1.5 A; IG = 0.2 A; dIG/dt = 0.2 A/s;
T2- G+
IGM
peak gate current
PGM
peak gate power
PG(AV)
average gate power
0.5
Tstg
storage temperature
-40
150
Tj
junction temperature
125
BT134W-600
Product data sheet
over any 20 ms period
12 June 2014
3 / 13
BT134W-600
NXP Semiconductors
4Q Triac
aaa-011029
12
IT(RMS)
(A)
10
aaa-011027
1.2
108 C
IT(RMS)
(A)
0.8
0.4
4
2
0
10-2
10-1
0
-50
1
10
surge duration (s)
f = 50 Hz; Tsp = 108 C

Fig. 1.
Fig. 2.
RMS on-state current as a function of surge

duration; maximum values
50
100
Tsp (C)
150
RMS on-state current as a function of solder

point temperature; maximum values
aaa-011026
1.2
Ptot
= 180
(W)
120
107
Tsp(max)
(C)
90
60
0.8
113
30
0.4
119
125
0
0
0.2
0.4
0.6
0.8
IT(RMS) (A)
1.2
= conduction angle
a = form factor = IT(RMS) / IT(AV)
Fig. 3.
Total power dissipation as a function of RMS on-state current; maximum values
BT134W-600
Product data sheet
12 June 2014
4 / 13
BT134W-600
NXP Semiconductors
4Q Triac
003aae960
12
ITSM
(A)
10
8
6
ITSM
IT
1/f
Tj(init) = 25 C max
1
10
102
103
104
number of cycles
f = 50 Hz
Fig. 4.
Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum
values
aaa-011030
103
ITSM
IT
ITSM
(A)
t
T
Tj = 25 C max
102
(1)
(2)
10
10-5
10-4
10-3
10-2
tp (s)
10-1
tp 20 ms
(1) dIT/dt limit
(2) T2- G+ quadrant limit
Fig. 5.
Non-repetitive peak on-state current as a function of pulse width for sinusoidal currents; maximum values
BT134W-600
Product data sheet
12 June 2014
5 / 13
BT134W-600
NXP Semiconductors
4Q Triac
9. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Rth(j-sp)
thermal resistance
from junction to solder
point
full cycle; Fig. 6
15
K/W
Rth(j-a)
thermal resistance
from junction to
ambient
full cycle; printed circuit board mounted;

minimum footprint
156
K/W
full cycle; printed circuit board mounted;

pad area
70
K/W
003aae965
102
Zth(j-sp)
(K/W)
10
unidirectional
bidirectional
P
10-1
tp
10-2
10-5
Fig. 6.
10-4
10-3
10-2
10-1
tp (s)
10
Transient thermal impedance from junction to solder point as a function of pulse width
BT134W-600
Product data sheet
12 June 2014
6 / 13
BT134W-600
NXP Semiconductors
4Q Triac
10. Characteristics
Table 7.
Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VD = 12 V; IT = 0.1 A; T2+ G+;
35
mA
35
mA
11
35
mA
30
70
mA
20
mA
16
30
mA
20
mA
30
mA
Static characteristics
IGT
gate trigger current
Tj = 25 C; Fig. 7
VD = 12 V; IT = 0.1 A; T2+ G-;
Tj = 25 C; Fig. 7
VD = 12 V; IT = 0.1 A; T2- G-;
Tj = 25 C; Fig. 7
VD = 12 V; IT = 0.1 A; T2- G+;
Tj = 25 C; Fig. 7
IL
latching current
VD = 12 V; IG = 0.1 A; T2+ G+;

Tj = 25 C; Fig. 8
VD = 12 V; IG = 0.1 A; T2+ G-;
Tj = 25 C; Fig. 8
VD = 12 V; IG = 0.1 A; T2- G-;
Tj = 25 C; Fig. 8
VD = 12 V; IG = 0.1 A; T2- G+;
Tj = 25 C; Fig. 8
IH
holding current
VD = 12 V; Tj = 25 C; Fig. 9
15
mA
VT
on-state voltage
IT = 2 A; Tj = 25 C; Fig. 10
1.2
1.5
VGT
gate trigger voltage
VD = 12 V; IT = 0.1 A; Tj = 25 C;
0.7
0.25
0.4
VD = 600 V; Tj = 125 C
0.1
0.5
mA
VDM = 402 V; Tj = 125 C; (VDM = 67%
100
250
V/s
50
V/s
Fig. 11
VD = 400 V; IT = 0.1 A; Tj = 125 C;
Fig. 11
ID
off-state current
Dynamic characteristics
dVD/dt
rate of rise of off-state

voltage
of VDRM); exponential waveform; gate

open circuit
dVcom/dt
tgt
rate of change of
commutating voltage
VD = 400 V; Tj = 95 C; dIcom/dt = 1.8 A/

ms; IT = 1 A; gate open circuit
gate-controlled turn-on ITM = 1.5 A; VD = 600 V; IG = 0.1 A; dIG/

time
dt = 5 A/s
BT134W-600
Product data sheet
12 June 2014
7 / 13
BT134W-600
NXP Semiconductors
4Q Triac
003aae967
003aae964
3
IL
IL (25 C)
IGT
IGT (25 C)
(1)
(2)
(3)
(4)
(1)
(2)
(3)
0
-60
(4)
-10
40
90
Tj (C)
0
-60
140
(1) T2- G+
(2) T2- G(3) T2+ G(4) T2+ G+
Fig. 7.
Fig. 8.
-10
40
Tj (C)
140
Normalized latching current as a function of

Normalized gate trigger current as a function of

003aae966
2.0
003aae963
IH
IH (25 C)
IT
(A)
1.5
1.5
1.0
0.5
0.5
(1)
0
-60
Fig. 9.
90
-10
40
90
Tj (C)
140
0.5
(2)
(3)
1.5
VT (V)
Vo = 1.00 V; Rs = 0.21
Normalized holding current as a function of

(1) Tj = 125 C; typical values

(2) Tj = 125 C; maximum values
(3) Tj = 25 C; maximum values
Fig. 10. On-state current as a function of on-state
voltage
BT134W-600
Product data sheet
12 June 2014
8 / 13
BT134W-600
NXP Semiconductors
4Q Triac
003aae961
1.6
VGT
VGT(25 C)
1.2
0.8
0.4
0
-60
-10
40
90
Tj (C)
140
Fig. 11. Normalized gate trigger voltage as a function of junction temperature
BT134W-600
Product data sheet
12 June 2014
9 / 13
BT134W-600
NXP Semiconductors
4Q Triac
11. Package outline

Plastic surface-mounted package with increased heatsink; 4 leads
SOT223
c
y
HE
v M A
b1
Q
A
A1
2
e1
Lp
bp
w M B
detail X
4 mm
scale
DIMENSIONS (mm are the original dimensions)

UNIT
A1
bp
b1
e1
HE
Lp
mm
1.8
1.5
0.10
0.01
0.80
0.60
3.1
2.9
0.32
0.22
6.7
6.3
3.7
3.3
4.6
2.3
7.3
6.7
1.1
0.7
0.95
0.85
0.2
0.1
0.1
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
SOT223
JEITA
SC-73
EUROPEAN
PROJECTION
ISSUE DATE
04-11-10
06-03-16
Fig. 12. Package outline SC-73 (SOT223)

BT134W-600
Product data sheet
12 June 2014
10 / 13
BT134W-600
NXP Semiconductors
4Q Triac
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
12. Legal information

12.1 Data sheet status
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Document
status [1][2]
Product
status [3]
Objective
[short] data
sheet
Development This document contains data from

the objective specification for product
development.
Preliminary
[short] data
sheet
Qualification
This document contains data from the

preliminary specification.
Product
[short] data
sheet
Production
This document contains the product

specification.
[1]
[2]
[3]
Definition
Right to make changes NXP Semiconductors reserves the right to

make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Please consult the most recently issued document before initiating or

completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the Internet at URL http://www.nxp.com.
12.2 Definitions
Preview The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
NXP Semiconductors does not give any representations or warranties as to
the accuracy or completeness of information included herein and shall have
no liability for the consequences of use of such information.
Draft The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences
of use of such information.
Short data sheet A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local NXP
Semiconductors sales office. In case of any inconsistency or conflict with the
short data sheet, the full data sheet shall prevail.
Product specification The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product
is deemed to offer functions and qualities beyond those described in the
Product data sheet.
12.3 Disclaimers
Limited warranty and liability Information in this document is believed
to be accurate and reliable. However, NXP Semiconductors does not give
any representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
BT134W-600
Product data sheet
Suitability for use NXP Semiconductors products are not designed,

authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customers own
risk.
Quick reference data The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Applications Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their
applications and products using NXP Semiconductors products, and NXP
Semiconductors accepts no liability for any assistance with applications or
customer product design. It is customers sole responsibility to determine
whether the NXP Semiconductors product is suitable and fit for the
customers applications and products planned, as well as for the planned
application and use of customers third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default
in the customers applications or products, or the application or use by
customers third party customer(s). Customer is responsible for doing all
necessary testing for the customers applications and products using NXP
Semiconductors products in order to avoid a default of the applications
and the products or of the application or use by customers third party
customer(s). NXP does not accept any liability in this respect.
Limiting values Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customers general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
12 June 2014
11 / 13
BT134W-600
NXP Semiconductors
4Q Triac
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor
tested in accordance with automotive testing or application requirements.
NXP Semiconductors accepts no liability for inclusion and/or use of nonautomotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without NXP Semiconductors warranty
of the product for such automotive applications, use and specifications, and
(b) whenever customer uses the product for automotive applications beyond
NXP Semiconductors specifications such use shall be solely at customers
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors
standard warranty and NXP Semiconductors product specifications.
Translations A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
12.4 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV,
FabKey, GreenChip, HiPerSmart, HITAG, IC-bus logo, ICODE, ICODE, ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight,
MoReUse, QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug,
TOPFET, TrenchMOS, TriMedia and UCODE are trademarks of NXP
Semiconductors N.V.
HD Radio and HD Radio logo are trademarks of iBiquity Digital
Corporation.
BT134W-600
Product data sheet
12 June 2014
12 / 13
BT134W-600
NXP Semiconductors
4Q Triac
13. Contents
1
General description ............................................... 1
Features and benefits ............................................1
Applications ........................................................... 1
Quick reference data ............................................. 1
Pinning information ............................................... 2
Ordering information ............................................. 2
Marking ................................................................... 2
Limiting values .......................................................3
Thermal characteristics .........................................6
10
Characteristics ....................................................... 7
11
Package outline ................................................... 10
12
12.1
12.2
12.3
12.4
Legal information .................................................11

Data sheet status ............................................... 11
Definitions ...........................................................11
Disclaimers .........................................................11
Trademarks ........................................................ 12

For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 12 June 2014
BT134W-600
Product data sheet
12 June 2014
13 / 13

General Description: 4Q Triac

Uploaded by

Copyright:

Available Formats

General Description: 4Q Triac

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

General Description: 4Q Triac

Uploaded by

Copyright:

Available Formats

SO

Product data sheet

2. Features and benefits

High blocking voltage capability

General purpose low power motor control

4. Quick reference data

Quick reference data

repetitive peak offstate voltage

non-repetitive peak on- full sine wave; Tj(init) = 25 C;

RMS on-state current

full sine wave; Tsp 108 C; Fig. 1;

gate trigger current

VD = 12 V; IT = 0.1 A; T2+ G+;

VD = 12 V; IT = 0.1 A; T2- G+;

plastic surface-mounted package with increased heatsink; 4

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

repetitive peak off-state voltage

RMS on-state current

full sine wave; Tsp 108 C; Fig. 1;

non-repetitive peak on-state

full sine wave; Tj(init) = 25 C;

I2t for fusing

rate of rise of on-state current

IT = 1.5 A; IG = 0.2 A; dIG/dt = 0.2 A/s;

peak gate current

peak gate power

average gate power

Product data sheet

over any 20 ms period

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

f = 50 Hz; Tsp = 108 C

RMS on-state current as a function of surge

RMS on-state current as a function of solder

Total power dissipation as a function of RMS on-state current; maximum values

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

full cycle; Fig. 6

full cycle; printed circuit board mounted;

full cycle; printed circuit board mounted;

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

VD = 12 V; IT = 0.1 A; T2+ G+;

gate trigger current

VD = 12 V; IG = 0.1 A; T2+ G+;

gate trigger voltage

VDM = 402 V; Tj = 125 C; (VDM = 67%

rate of rise of off-state

of VDRM); exponential waveform; gate

VD = 400 V; Tj = 95 C; dIcom/dt = 1.8 A/

gate-controlled turn-on ITM = 1.5 A; VD = 600 V; IG = 0.1 A; dIG/

Product data sheet