ANT ASI4517R1 1862 Datasheet

ASI4517R1
DXXXXXX-690-960/690-960/1710-2690/1710-2690/1710-2690/1710-269065/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET Hexa-Band Antenna with 6 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960)
4 x (1710 - 2690)
Frequency range (MHz)

690 - 820
790 - 862
824 - 896
880 - 960
Polarization
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45 , -45
0 - 10 , continuously adjustable, each band separately
Electrical downtilt ()
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width ()
Vertical 3dB beam width ()
2 - 12 , continuously adjustable, each band separately
16.1
16.7
17.0
17.1
16.8
17.0
17.2
17.5
16.1 0.4
16.6 0.4
16.9 0.4
17.0 0.4
16.7 0.4
16.9 0.4
17.1 0.4
17.4 0.4
> 17
> 16
> 16
> 17
> 17
> 17
> 18
> 18
69 4
66 3
64 3
63 3
63 5
61 5
60 5
60 5
8.9 0.7
8.3 0.4
7.9 0.4
7.3 0.3
7.5 0.5
6.8 0.5
6.0 0.3
5.6 0.3
> 27
> 27
> 28
> 18
> 20
> 19
VSWR
< 1.5
28
Cross polar isolation (dB)
28
28 (690 - 960 // 690 - 960 MHz)
28 (690 - 960 // 1710 - 2690 MHz)
28 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB)

Front to back ratio , 30 (dB)
Cross polar ratio (dB)
> 24
0
Max. power per input (W)
> 23
> 25
> 27
> 26
> 27
> 22
> 22
> 21
> 17
500 (at 50 ambient temperature)
Total power (W)

-153 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc)

Impedance ()
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2600 x 548 x 150
Packing dimensions (H x W x D) (mm)
3000 x 770 x 260
Antenna weight (kg)
57.7
Clamps weight (kg)
5.8 (2 units)
Antenna packing weight (kg)
77.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
Operational temperature ()
Frontal:
1955 (at 150 km/h)
Lateral:
295 (at 150 km/h)
Rear side: 2070 (at 150 km/h)
Wind load (N)

Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 7/16 DIN Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 8
3.1 kg
1 (Separate packing)
ASI4517R1
Integrated RET Specifications

Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 7.5 (motor activated, 12V)

< 3.0 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)

4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment installed outdoor), EN 55022 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM
R
Integrated RET S/N:
HWMxxxL.r
yT
yT
HWMxxxLyT
HWMxxxL..yyB
yyB
yyB
HWMxxxR.r
HWMxxxRyT
HWMxxxR..yyB
r - Red
y - Yellow
L - Left antenna or Left array
R - Right antenna or Right array
T - Top array
B - Bottom array
2600
116
1880
ASI4517R1
Pattern sample for reference
Left Antenna
690 - 960 MHz
1710 - 2690 MHz

(Top)
1710 - 2690 MHz

(Bottom)
1710 - 2690 MHz

(Top)
1710 - 2690 MHz

(Bottom)
Right Antenna
690 - 960 MHz
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd.
Bantian, Longgang District, Shenzhen 518129, P.R.China
Any previous datasheet issues become invalid.
www.huawei.com/antenna
Issue: 2015-12-30

ANT ASI4517R1 1862 Datasheet

Uploaded by

Copyright:

Available Formats

ANT ASI4517R1 1862 Datasheet

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ANT ASI4517R1 1862 Datasheet

Uploaded by

Copyright:

Available Formats

ASI4517R1

Frequency range (MHz)

2 - 12 , continuously adjustable, each band separately

Cross polar isolation (dB)

Interband isolation (dB)

Max. power per input (W)

500 (at 50 ambient temperature)

Total power (W)

250 (at 50 ambient temperature)

1200 (at 50 ambient temperature)

Intermodulation IM3 (dBc)

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

2600 x 548 x 150

Packing dimensions (H x W x D) (mm)

3000 x 770 x 260

Antenna weight (kg)

Clamps weight (kg)

Antenna packing weight (kg)

77.9 (Included clamps)

Mast diameter supported (mm)

Wind load (N)

Survival wind speed (km/h)

12 x 7/16 DIN Female

Units per antenna

Integrated RET Specifications

AISG 2.0 / 3GPP

Input voltage range (V)

Power consumption (W)

< 7.5 (motor activated, 12V)

Adjustment time (full range) (s)

< 65 (typically, depending on antenna type)

Lightning protection (kA)

Integrated RET S/N:

690 - 960 MHz

1710 - 2690 MHz

1710 - 2690 MHz

1710 - 2690 MHz

1710 - 2690 MHz

690 - 960 MHz

Huawei Technologies Co., Ltd.

Bantian, Longgang District, Shenzhen 518129, P.R.China

Any previous datasheet issues become invalid.

You might also like