Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
2K views

Theoben Evolution Trigger

This document provides information about Theoben Engineering, a company located in Somersham, Cambridgeshire, England that manufactures triggers for break barrel air rifles. It describes the evolution trigger, which is the standard trigger used in Theoben's break barrel rifle models. The trigger has an automatic safety catch that engages when the rifle is cocked and disengages when the trigger is pulled to fire the rifle. The document provides instructions on adjusting aspects of the trigger such as the depth of engagement, second stage pressure, and second stage let off position. However, it cautions that the trigger is factory set and adjustments should only be made by those knowledgeable about air rifle triggers.

Uploaded by

tunznath
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Theoben Evolution Trigger

This document provides information about Theoben Engineering, a company located in Somersham, Cambridgeshire, England that manufactures triggers for break barrel air rifles. It describes the evolution trigger, which is the standard trigger used in Theoben's break barrel rifle models. The trigger has an automatic safety catch that engages when the rifle is cocked and disengages when the trigger is pulled to fire the rifle. The document provides instructions on adjusting aspects of the trigger such as the depth of engagement, second stage pressure, and second stage let off position. However, it cautions that the trigger is factory set and adjustments should only be made by those knowledgeable about air rifle triggers.

Uploaded by

tunznath
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

THEOBEN ENGINEERING

WEST NEWLANDS
SOMERSHAM
CAMBS. PE28 3EB
ENGLAND

CAMBS. R.F.D. No. 97

http://www.theoben.co.uk

Tel : 01487 740744


Fax : 01487 740040

theoben@zetnet.co.uk

THE EVOLUTION TRIGGER

- 1994 onwards

The trigger for the Break Barrel range


1. Rifle cocked and
safety catch on

!"Piston - Direction of Travel

Sear & Sear Spring

Strut &
Strut Spring

Adjuster
Screw

Automatic
Safety Catch

2. Rifle fired - safety off


and trigger pulled

!"Piston - Direction of Travel

!
Sear & Sear Spring

Adjuster
Screw

Push off
Safety Catch

Pull Trigger

This trigger is factory set and we do not recommend adjusting it yourself unless you know what you are doing.
1 Do not adjust the depth of engagement to a knife-edge, this will make the trigger unsafe. However, by decreasing
the depth of engagement a small amount will reduce the amount of travel for the first stage of trigger movement.
2 2nd stage pressure is adjustable by rotating a 2mm allen key - clockwise for higher-pressure etc.
3 2nd stage let off position is factory set, but can be fine tuned if necessary by using a screw driver on the adjuster
screw slot - Clockwise for 2nd stage to be felt earlier.
H. F. Taylor & D. R. Theobald

evo_trig 06/00

V.A.T. No. GB 360 0324 05

You might also like