MFG : 09.02.

20 REV : 1

4CIS VANE introduces

you the reliable pedicle screw

The Most Reliable Spinal Solution

Non-slip threaded joint
Ergonomic design
Wedged trapezoid thread
Superior locking mechanism

www.solco.co.kr
SEOUL OFFICE
13F, #505-14, Gasan-dong, Geumcheon-gu, Seoul 158-803 Korea
Tel. 82-2-2082-7700 Fax. 82-2-2082-7701
HEAD OFFICE
#34-6, Keumam-ri, Seotan-myeon, Pyeongtaek, Gyeonggi-do 451-852 Korea
Tel. 82-31-664-4101 Fax. 82-31-663-6520

4CIS Vane Spine System

The 4CIS VANE Spine System is indicated for temporary

or permanent correction and stabilization of the vertebral
column from the thoracic to the sacrum with the aim of
helping consolidation or bone fusion.
It is designed for both posterior, sacral and anterior fixation.

Design Rationale

s
_ 05

Progressive Changes
Enhanced Poly-axial System
VANE PEDICLE SCREW SYSTEM
Poly-Axial Screw Head & Nut Thread
Poly-Axial Head Thread
Poly-Axial Pedicle Screw
Poly-Axial Screw Thread
MECHANICAL TESTING
Static Compressive test
Static Tensional test
Static Torsional test
Dynamic Compressive test

Surgical Technique

Design
Rationale

_ 11

Pedicle Identification
Pedicle Preparation
Screw Insertion
Rod Insertion
Nut Application
Compression / Distraction
Final Tightening
Cross Link Technique

Case Studies

Progressive Changes
Enhanced Poly-Axial System
VANE PEDICLE SCREW SYSTEM
Poly-Axial Screw Head & Nut Thread
Poly-Axial Head Thread
Poly-Axial Pedicle Screw
Poly-Axial Screw Thread

_ 21

Preoperation & Postoperation

Product Information

MECHANICAL TESTING
Static Compressive test
Static Tensional test
Static Torsional test
Dynamic Compressive test

_ 27

Implants Specifications
Instruments Specifications

V A N E
04 4CIS Vane Spine System

S P I N E

S Y S T E M

Design
Rationale

Vane Pedicle
Screw System
Poly-Axial Screw Head & Nut Thread

Progressive Changes

The design of Vane thread in the nut makes it

possible to achieve firm and stable fixation between
the Screw and the Nut (significantly increasing the
compression strength).

4CIS VANE Spine System is an enhanced Poly-Axial Pedicle Screw

System that provides the greatest holding power on the Poly-Axial
Screw housing and the Vane set Screw, and allows stability of the
spinal fixation system in surgical management of the spine.

Enhanced Poly-axial System

Superior locking performance
Conic tapper housing increased stability
Micro ridges on the poly-axial screw head
and the washer allow maximum
stability in VANE spine system.

15

Poly-Axial Head Thread

15

06 4CIS Vane Spine System

Micro ridges machined in the poly-axial screw

head combined with the washer incorporates a
taper lock onto the poly-axial screw head
allowing maximum poly-axial system stability in
VANE spine system.

www.solco.co.kr

07

Vane Pedicle
Screw System
General thread design

Mechanical Testing
The mechanical test including static and cyclic fatigue test was performed in
accordance with ASTM F1717.

VANE thread design

Thread
Design

Area

Fs
Applied the static compression bending load

Standard

0.61mm

Fs=50% of Fr

VANE

0.66mm2

Fs=16% of Fr

Poly-Axial Pedicle Screw

Poly-Axial Pedicle Screw provides a variation of 30
in angle and ease of use while achieving best
anatomic position.
Poly-Axial Screw has the same profile as monoAxial Screw in shape, height and thickness.

Support

Applied the static tension bending load

Poly-Axial Screw Thread

Various sizes of screws are available for perfect adaptation
to the thoracic, lumbar and sacral pedicles.

1/3 cylinder, 2/3 cylinder and Conical

Optimal stress distribution
Protection from screw pullout
Easy insertion
Support

Non-self tapping to minimize any neural damage.

08 4CIS Vane Spine System

www.solco.co.kr

09

Mechanical Testing
The mechanical test including static and cyclic fatigue test was performed in
accordance with ASTM F1717.

Applied the static torsion bending load

Support

Surgical
Technique

Applied the static dynamic

compression bending load

Pedicle Identification
Pedicle Preparation
Screw Insertion
Rod Insertion
Nut Application
Compression / Distraction
Final Tightening

Support

Cross Link Technique

V A N E
10 4CIS Vane Spine System

S P I N E

S Y S T E M

Surgical Technique
Step 1

Surgical Technique
Step 2

Pedicle Identification

Pedicle Preparation

The pedicle entry point depends on the intersection

After the determination of the pedicle entry point, the entry

techniques. It involves drawing a line from the lateral

hole is prepared by Awl (4901-5036).

aspect of the facet joint, which intersects a line that

A pathway is then opened up with a Pedicle Probe (29-

bisects the transverse process at a spot overlying the

10013) from a smaller to a larger sequentially. The Pedicle

pedicle. However, because of the high variability in

Probe is calibrated and marked with 1cm intervals to help

pedicle dimensions on each level of vertebra,

determine proper screw length. A balltipped Pedicle

intraoperative radiograph is checked to determine the

Tester (29-10014) is utilized to palpate five distinct bony

exact position of the entry in the anteroposterior and

borders (floor and four walls).

lateral projection after inserting guide pins.

12 4CIS Vane Spine System

www.solco.co.kr

13

Surgical Technique
Step 3

Surgical Technique
Step 4

Screw Insertion

Rod Insertion

With the pedicle pathway prepared and proper screw

Cut the Rod to the appropriate length and bend

length and diameter determined, the screw is ready

the Rod with a French Rod Bender (29-10025)

for insertion. Place the screw slowly while checking

to fit the desired spinal contours .

proper trajectory using fluoroscopic x-ray.

A Rod Holder (4901-2009) can be used for

optimal Rod insertion.

14 4CIS Vane Spine System

www.solco.co.kr

15

Surgical Technique
Step 5

Surgical Technique
Step 6

Nut Application
After the Rod is loaded into the bottom of the screw head, the Nut
may be seated onto the top of the screw head using the Nut
Starter (4901-5037).
When the rod is not fully seated into the head of the screw, the Rod
Introducer (29-10027) is preferred for reduction. The Rod
Introducer is then rotated clockwise levering the Rod inside of the
screw head.
The Nut Starter is then used to insert the Nut.
If necessary, the Rod Pusher (29-10026) or Anti Torque Wrench
(4901-2006) is used to hold the Rod inside of screw head.

Compression or Distraction
The compression or the distraction procedure may be
performed if necessary. In that case, extra caution should be
required when placing the nuts securely against the head of
the screws.
In either maneuver, the Nut on one side of the segment
should be tightened provisionally, while the Nut on the other
side remains loosened.
The Compression or Distraction will occur against the
provisionally tightened screws.

16 4CIS Vane Spine System

www.solco.co.kr

17

Surgical Technique
Step 7
T-handle, square, Ratchet

Final Tightening
The final tightening is performed with the Nut Final Driver
(4901-5012) and the Anti Torque Wench (4901-2006).
The Anti Torque Wench is placed to a screw and a Rod, while
the nut final Driver is inserted through the cannulation of the
Anti Torque Wench.
If necessary, the Nut Final Driver may be used to remove a
nut after final tightening.
Once a nut has been removed, it should be discarded and
replaced with the new one.

Nut Final Driver

Anti Torque Wrench

18 4CIS Vane Spine System

www.solco.co.kr

19

Surgical Technique
Step 8
Cross Link Technique
After selection of cross link that
corresponds in proper size for the
distance between rods, the cross link is
applied to the rods and tightened with
two tightening screws.
If the size of cross link doesnt fit
exactly, Compressor (29-10028) or
Distractor (29-10029) can be used
accordingly to adjust the distance
between rods before final fixation.

Case Studies -

Preoperation & Postoperation

L5 Stenosis HIDV Isthmic Type
L3-L5 Stenosis Isthmic Type
L2 Fracture Isthmic Type

V A N E
20 4CIS Vane Spine System

S P I N E

S Y S T E M

The 4CIS VANE Spine System is a pedicle screw system indicated for the treatment of severe Spondylolisthesis (Grade 3 and 4) of
the L5-S1 vertebra in skeletally mature patients receiving fusion by autogenous bone graft having implants attached to the lumbar
and sacral spine (L3 to sacrum) with removal of the implants after the attainment of a solid fusion.

Post OP X-ray

Product
Information
Implants Specifications
Instruments Specifications

V A N E

S P I N E

S Y S T E M

Implants

Implants
VANE Pedicle Screw (Mono)
4002-4025
4002-4030
4002-4525
4002-4530
4002-4535
4002-4540
4002-4545
4002-4550
4002-5525
4002-5530
4002-5535
4002-5540
4002-5545
4002-5550
4002-6530
4002-6535
4002-6540
4002-6545
4002-6550
4002-6555
4002-6560
4002-7530
4002-7535
4002-7540
4002-7545
4002-7550
4002-7555
4002-7560
4002-8030
4002-8035
4002-8040
4002-8045
4002-8050
4002-8055
4002-8060
4002-8530
4002-8535
4002-8540
4002-8545
4002-8550
4002-8555
4002-8560

Mono-Axial Pedicle Screw

Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw
Mono-Axial Pedicle Screw

4.0x25mm
4.0x30mm
4.5x25mm
4.5x30mm
4.5x35mm
4.5x40mm
4.5x45mm
4.5x50mm
5.5x25mm
5.5x30mm
5.5x35mm
5.5x40mm
5.5x45mm
5.5x50mm
6.5x30mm
6.5x35mm
6.5x40mm
6.5x45mm
6.5x50mm
6.5x55mm
6.5x60mm
7.5x30mm
7.5x35mm
7.5x40mm
7.5x45mm
7.5x50mm
7.5x55mm
7.5x60mm
8.0x30mm
8.0x35mm
8.0x40mm
8.0x45mm
8.0x50mm
8.0x55mm
8.0x60mm
8.5x30mm
8.5x35mm
8.5x40mm
8.5x45mm
8.5x50mm
8.5x55mm
8.5x60mm

VANE Pedicle Screw (Poly)

4012-5525
4012-5530
4012-5535
4012-5540
4012-5545
4012-5550
4012-5555
4012-6530
4012-6535
4012-6540
4012-6545
4012-6550
4012-6555
4012-6560
4012-7530
4012-7535
4012-7540
4012-7545
4012-7550
4012-7555
4012-7560

28 4CIS Vane Spine System

Poly-Axial Pedicle Screw

Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw
Poly-Axial Pedicle Screw

5.5x25mm
5.5x30mm
5.5x35mm
5.5x40mm
5.5x45mm
5.5x50mm
5.5x55mm
6.5x30mm
6.5x35mm
6.5x40mm
6.5x45mm
6.5x50mm
6.5x55mm
6.5x60mm
7.5x30mm
7.5x35mm
7.5x40mm
7.5x45mm
7.5x50mm
7.5x55mm
7.5x60mm

VANE Nut
4242-0001

Nut

VANE Cross - Link

4412-3034
4412-3442
4412-4053
4412-5070

Cross - Link
Cross - Link
Cross - Link
Cross - Link

30/34mm
34/42mm
40/53mm
50/70mm

VANE Smooth Rod

4302-5804
4302-5805
4302-5806
4302-5807
4302-5808
4302-5809
4302-5810
4302-5812
4302-5814
4302-5816
4302-5818
4302-5820
4302-5825
4302-5830
4302-5835
4302-5840
4302-5845
4302-5850

Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod
Smooth Rod

5.7 x 40mm
5.7 x 50mm
5.7 x 60mm
5.7 x 70mm
5.7 x 80mm
5.7 x 90mm
5.7 x 100mm
5.7 x 120mm
5.7 x 140mm
5.7 x 160mm
5.7 x 180mm
5.7 x 200mm
5.7 x 250mm
5.7 x 300mm
5.7 x 350mm
5.7 x 400mm
5.7 x 450mm
5.7 x 500mm

VANE Curved Rod

4332-5804
4332-5805
4332-5806
4332-5807
4332-5808
4332-5809
4332-5810
4332-5812
4332-5814
4332-5816
4332-5818
4332-5820

Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod
Curved Rod

5.7 x 40mm
5.7 x 50mm
5.7 x 60mm
5.7 x 70mm
5.7 x 80mm
5.7 x 90mm
5.7 x 100mm
5.7 x 120mm
5.7 x 140mm
5.7 x 160mm
5.7 x 180mm
5.7 x 200mm

www.solco.co.kr

29

Instruments

Instruments

Awl

Rod Introducer

Coed No. 4901-5036

Coed No. 29-10027

Pedicle Probe for 5.5mm Screw, STR.

Coed No. 29-10012

Cross Link Screw Driver

Coed No. 4901-0030

Guide Pin (Triangle)

Pedicle Probe for 6.5mm Screw, STR.

Coed No. 29-10015

Coed No. 29-10013

Guide Pin (Ellipse)

Coed No. 29-10016

Pedicle Probe for 6.5mm Screw, CVD.

Coed No. 4901-0041

Tap for 5.5mm

Coed No. 4901-5006

Tap for 6.5mm

Coed No. 4901-5007

Pedicle Tester, STR.

coed no. 29-10014

Tap for 7.5mm

Coed No. 4901-5014

Pedicle Tester, CVD.

coed no. 4901-5004

Nut Starter
Coed No. 4901-5037

Nut Final Driver

Coed No. 4901-5012

Rod Pusher
Coed No. 29-10026

30 4CIS Vane Spine System

Poly Axial Bone Screw Final Driver

Coed No. 4901-5015

www.solco.co.kr

31

Instruments

Instruments

Mono Axial Screw Driver

Coed No. 4901-5010

French Rod Bender

Coed No. 29-10025

Poly Axial Screw Driver

Coed No. 4901-5013

Rod Gripper
Coed No. 29-10022

Poly Axial Screw Driver

Coed No. 4901-5033

Torque Wrench (12N Torque Limiter)

Coed No. 4901-2012

Rod Holder
Coed No. 4901-2009

Poly Axial Screw Aligner

Coed No. 4901-5038

Screw Compressor
In-line handle, square, Ratchet

Coed No. 29-10028

Coed No. 4901-5034

T-handle, square, Ratchet

Coed No. 4901-5035

Screw Distractor
Coed No. 29-10029

32 4CIS Vane Spine System

www.solco.co.kr

33

Instruments

Implants / Instruments Container

Screw Tray
Coed No. 9901-4020

Accessary Case
Coed No. 9901-4021

Anti Torque Wrench

Anti Torque Wrench

Coed No. 29-10131

Coed No. 4901-2006

Implants Container
Coed No. 9901-4022

Instruments Container
Coed No. 9901-4023

34 4CIS Vane Spine System

Nut Guide

Persuader

Coed No. 4901-2008

Coed No. 4901-5005

www.solco.co.kr

35