Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 141 views

    Kaysafe ITP

    Uploaded by

    Steve Newman
    This document is an inspection and testing plan from Kaysafe Engineering Ltd for an unnamed client and project. It outlines 14 steps in the inspection process, including approving drawings, reviewing procedures and qualifications, inspecting materials, fabrication inspection, pressure testing, marking, dimensional checks, and documentation review. Each step lists the relevant procedures, acceptance criteria, and verification documents to ensure compliance. The plan is at revision 0 and aims to verify all work meets the client's purchase order requirements and applicable standards like ASME B31.3 and API 598.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Kaysafe ITP

    Uploaded by

    Steve Newman
    141 views2 pages
    This document is an inspection and testing plan from Kaysafe Engineering Ltd for an unnamed client and project. It outlines 14 steps in the inspection process, including approving drawings, reviewing procedures and qualifications, inspecting materials, fabrication inspection, pressure testing, marking, dimensional checks, and documentation review. Each step lists the relevant procedures, acceptance criteria, and verification documents to ensure compliance. The plan is at revision 0 and aims to verify all work meets the client's purchase order requirements and applicable standards like ASME B31.3 and API 598.

    Original Description:

    Typical ITP for Y strainers, T strainers, Temporary strainers both Conical and Basket type

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an inspection and testing plan from Kaysafe Engineering Ltd for an unnamed client and project. It outlines 14 steps in the inspection process, including approving drawings, reviewing procedures and qualifications, inspecting materials, fabrication inspection, pressure testing, marking, dimensional checks, and documentation review. Each step lists the relevant procedures, acceptance criteria, and verification documents to ensure compliance. The plan is at revision 0 and aims to verify all work meets the client's purchase order requirements and applicable standards like ASME B31.3 and API 598.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    141 views2 pages

    Kaysafe ITP

    Uploaded by

    Steve Newman
    This document is an inspection and testing plan from Kaysafe Engineering Ltd for an unnamed client and project. It outlines 14 steps in the inspection process, including approving drawings, reviewing procedures and qualifications, inspecting materials, fabrication inspection, pressure testing, marking, dimensional checks, and documentation review. Each step lists the relevant procedures, acceptance criteria, and verification documents to ensure compliance. The plan is at revision 0 and aims to verify all work meets the client's purchase order requirements and applicable standards like ASME B31.3 and API 598.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 2

    KAYSAFE ENGINEERING LTD

    12 Linkfield Corner,
    Redhill.
    Surrey, RH1 1BB
    UNITED KINGDOM

    INSPECTION AND TESTING PLAN


    Rev. 0

    CLIENT

    Page

    Project

    of
    Inspection

    P.O.:
    STEP No

    STEP DESCRIPTION

    Procedure
    Drawing
    Specification

    Acceptance
    Criteria

    Verifying
    Document

    Approval Of Drawings

    QAM S.5.0

    ASME B.31.3
    ASME B.16.34

    DRAWINGS

    Review NDE Procedures & Operators Qualifications

    QAM S.11.0

    SNT-TC-1A LEVEL 2
    OR EQUIVALENT

    PROCEDURES &
    QUALIFICATIONS

    Review Sub Orders

    QAM S.7.0

    P.O. REQUIREMENTS

    UNPRICED COPIES
    SUB-ORDERS

    Material Receipt, Identification, Review

    QAM S.8.0

    SUB-ORDERS

    GOOD INWARD REPORT

    Identify Material

    QAM S.8.0

    MAT. STDS

    MATERIAL CERTS.
    EN10204 3.1.

    Visual Examination Of Material

    QAM S.8.0

    MSS SP55

    Q.PLAN

    In Fabrication Inspection

    QAM S.10.0

    P.O. REQUIREMENTS

    Q.PLAN

    100% PMI on Body/ Cover

    PROCEDURE

    MAT. STDS & SPEC.

    PMI REPORT

    Record Gauge Serial No. And Check Calibration

    QAM S.12.0

    ASME B.31.3

    Q.PLAN

    10

    Hydrotest to API 598

    PROCEDURE

    ASME B31.3

    HYDROTEST REPORT

    11

    Marking

    QAM S.13.0

    MSS SP55
    P.O. REQUIREMENTS
    PED 97/23/CE

    Q. PLAN

    12

    Dimensional Check

    QAM S.12.0

    DRAWINGS

    Statement on Test Certificate

    Remarks & Notes

    NOT WITNESSED

    In
    House

    Client

    0 Rev. 0

    Page

    0 Project

    CLIENT
    P.O.: 0

    of
    Inspection

    STEP No

    STEP DESCRIPTION

    Procedure
    Drawing
    Specification

    Acceptance
    Criteria

    Verifying
    Document

    13

    Final Inspection & Complete Data Report Form

    QAM S.11.0

    DRAWINGS AND
    P.O. REQUIREMENTS

    RELEASE NOTE

    14

    Documentation Review

    QAM S.6.0

    P.O. REQUIREMENTS

    MATERIAL CERTS.
    NDE REPORTS

    Remarks & Notes

    Q.A. MANAGER

    In
    House

    Client

    You might also like