Dual SCR Isolated Module: Pow-R-Blok

LD43__43
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272
www.pwrx.com
POW-R-BLOKTM
Dual SCR Isolated Module
430 Amperes / 1800-2200 Volts
Description:
OUTLINE DRAWING
Powerex Dual SCR Modules are

designed for use in applications
requiring phase control and isolated
packaging. The modules are isolated
for easy mounting with other
components on a common heatsink.
TM
POW-R-BLOK has been tested and
recognized by the Underwriters
Laboratories.
A
R
B
C
J
H
P - M10 THD (3 TYP.)
Q - DIA. (4 TYP.)
LD43__43
Dual SCR
TM
POW-R-BLOK Module
T - (4 TYP.)
S
LD43 Outline Dimensions

4
5
7
6
Dimension
Inches
Millimeters
5.91
150.0
4.88
124.0
4.41
112.0
2.36
60.0
2.05
52.0
1.97
50.0
1.89
48.0
1.73
44.0
1.22
31.0
1.10
28.0
Ordering Information:
1.00
25.4
Select the complete eight-digit

module part number from the table
below.
Example: LD431843 is a 1800 Volt,
430 Ampere Dual SCR Isolated
TM
POW-R-BLOK Module
0.69
17.5
0.39
10.0
Type
LD43
Voltage
Volts
(x100)
Current
Amperes
(x10)
18
20
22
43
M10 Metric
M10
0.26 Dia.
6.5 Dia.
0.24
6.0
0.12
3.0
.110 x .032
2.5 x 0.8
Features:
Electrically Isolated Heatsinking

Aluminum Nitride Isolator
Compression Bonded Elements
Metal Baseplate
Low Thermal Impedance
for Improved Current Capability
UL Recognized
Benefits:
No Additional Insulation
Components Required
Easy Installation
No Clamping Components
Required
Reduce Engineering Time
Applications:
Bridge Circuits
AC & DC Motor Drives
Battery Supplies
Power Supplies
Large IGBT Circuit Front Ends
Note: Dimensions are for reference only.
Revision Date: 03/06/2015
LD43__43
www.pwrx.com
POW-R-BLOKTM
Absolute Maximum Ratings

Characteristics
Conditions
Repetitive Peak Forward and Reverse Blocking

Voltage
Non-Repetitive Peak Blocking Voltage
(t < 5 msec)
RMS Forward Current
Average Forward Current
Symbol
Units
VDRM & VRRM
up to 2200
VRSM
VRRM + 100
TC=70C
IT(RMS)
800
180 Conduction, TC=80C

180 Conduction, TC=70C
430
510
14,000
21,000
12,000
18,000
12,000
17,000
10,000
15,000
A
A
A
A
A
A
A
A
A
A
A
Peak One Cycle Surge Current, Non-Repetitive
60 Hz, 100% VRRM reapplied, Tj=25C

60 Hz, No VRRM reapplied, Tj=25C
IT(AV)
IT(AV)
ITSM
ITSM
ITSM
ITSM
ITSM
ITSM
ITSM
ITSM
Peak Three Cycle Surge Current, Non-Repetitive
60 Hz, 100%VRRM reapplied, Tj=125C
ITSM
9,600
Peak Ten Cycle Surge Current, Non-Repetitive
60 Hz, 100%VRRM reapplied,Tj=125C
ITSM
7,500
I t for Fusing for One Cycle (No Vrrm reapplied)
I t for Fusing for One Cycle (100% Vrrm reapplied)
Maximum Rate-of-Rise of On-State Current,

(Repetitive)
Operating Temperature
8.3 milliseconds, Tj=25C
It
I2t
2
1.82 x 10
1.35 x 10
10 milliseconds, Tj=25C
It
1.51 x 10
I2t
1.13 x 10
It
2
8.1 x 10
It
6.0 x 10
I2t
6.7 x 10
It
Per JEDEC Standard 397 5.2.2.6
di/dt
5.0 x 10
200
A
6
A sec
A2 sec
A2 sec
A2 sec
A2 sec
A2 sec
A2 sec
A2 sec
A/s
TJ
-40 to +125
Tstg
-40 to +150
Module Weight, Typical
55
6
110
12
1500
in. Lb.
Nm
in. Lb.
Nm
g
3.30
lb
V Isolation @ 25C
3000
Storage Temperature
Max. Mounting Torque, M6 Mounting Screw
Max. Mounting Torque, M10 Terminal Screw
Vrms
LD43__43
www.pwrx.com
POW-R-BLOKTM
Electrical Characteristics, TJ=25C unless otherwise specified

Characteristics
Symbol
Test Conditions
Repetitive Peak Forward Leakage Current
IDRM
Up to 2200V, TJ=125C
80
mA
Repetitive Peak Reverse Leakage Current
IRRM
Up to 2200V, TJ=125C
80
mA
Peak On-State Voltage
VTM
ITM=1500A
1.77
Threshold Voltage, Low-level

Slope Resistance, Low-level
V(TO)1
rT1
TJ = 125C, I = 15%IT(AV) to IT(AV)
0.88
0.66
V
m
Threshold Voltage, High-level

Slope Resistance, High-level
V(TO)2
rT2
TJ = 125C, I = IT(AV) to ITSM
1.34
0.32
V
m
VTM Coefficients, Full Range
Min.
VTM = V(TO)1 + rT1 I

VTM = V(TO)2 + rT2 I
TJ = 125C, I = 10A to 6kA
VTM = A+ B Ln I +C I + D Sqrt I
Minimum dV/dt
Max.
A=
B=
C=
D=
Units
0.766
-1.046E-02
1.805E-04
2.00E-02
dV/dt
Exponential to VDRM
Tj=125C, Gate Open
1000 Typ.
V/s
Gate Trigger Current
IGT
Tj=25C, VD=12V
200
mA
Gate Trigger Voltage
VGT
Tj=25C, VD=12V
3.0
Volts
Non-Triggering Gate Voltage
VGDM
Tj=125C, VD= VDRM
0.25
Volts
Peak Forward Gate Current
IGTM
4.0
Amp
Peak Reverse Gate Voltage
VGRM
Volts
Thermal Characteristics
Characteristics
Symbol
Max.
Units
0.0325
0.0650
C/W
C/W
Thermal Resistance, Junction to Case
RJ-C
Per Module, both conducting

Per Junction, both conducting
Thermal Impedance Coefficients
ZJ-C
ZJ-C= K1 (1-exp(-t/1))
K1 = 8.03E-04
1 = 3.39E-04
+ K2 (1-exp(-t/2))
+ K3 (1-exp(-t/3))
K2 = 1.03E-02
2 = 3.15E-03
K3 = 1.64E-02
3 = 0.106
+ K4 (1-exp(-t/4))
Per Module
K4 = 3.75E-02
4 = 2.066
0.01
Thermal Resistance, Case to Sink Lubricated
RC-S
C/W
LD43__43
POW-R-BLOKTM
www.pwrx.com
Maximum On-State Forward Voltage Drop
Maximum Transient Thermal Impedance
( Tj = 125 C )
(Junction to Case)
0.070
Thermal Impedance - Rjc - C/W
On-State Voltage - Vtm - Volts
0.060
0.050
0.040
0.030
0.020
0.010
0
10
100
1000
0.000
0.0001
10000
0.001
0.01
0.1
100
(Sinusoidal Waveform)
(Sinusoidal Waveform)
130
800
180
Max. Case Temperature - Tcase -C_
120
700
Max. Power Dissipation Per SCR - Watts_
10
Maximum Allowable Case Temperature
Maximum On-State Power Dissipation
90
600
60
500
30
15
400
300
200
180
360
CONDUCTION ANGLE
100
120
110
180
90
15
80
60
90
100
200
300
400
500
100
200
300
180
120
70
0
360
CONDUCTION ANGLE
100
30
400
500
Average On-State Current - It(av) - Amperes
Average On-State Current - Itm(av) - Amperes
Maximum On-State Power Dissipation
Maximum Allowable Case Temperature
(Rectangular Waveform)
(Rectangular Waveform)
1200
130
120
360
1000
Max. Case Temperature - Tcase -C_
Max. Power Dissipation Per SCR - Watts_
Time - t - Seconds
Instantaneous On-State Current - Itm - Amperes
270
180
800
120
90
60
600
30
15
400
200
180
360
100
200
300
400
500
600
700
180
360
CONDUCTION ANGLE
100
90
80
15
70
30
60
90
60
CONDUCTION ANGLE
110
120
180
270
360
50
800
100
200
300
400
500
600
700
800
LD43__43
POW-R-BLOKTM
www.pwrx.com
Gate Characteristics: Trigger Limits
Gate Characteristics: Power Curves
30
Gate Trigger Voltage - Vgt (V)
7
6
5
-40C
4
25C
3
130C
20
1ms
100Wp
15
10
5ms
20Wp
2
5
Min Vg DC
DC
Vgd
Min Vg DC
10ms, 10Wp
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Gate Trigger Current - Igt (A)
10
Gate Trigger Current - Igt (A)
Surge/Overload Current Ratings - 50 & 60Hz

2.50
Itsm (125oC) (60Hz)
Itsm (25C) (60Hz)
Itsm (125C) (50Hz)
Itsm (25C) (50Hz)
2.00
It(ov)/Itsm
Gate Trigger Voltage - Vgt (V)
Max Vg
25
Max Vg
= 12kA
= 18kA
= 10kA
= 15kA
1.50
1.00
Vr = 0V
0.50
Vr = Vrrm
0.00
0.1
10
100
Number of Cycles

Dual SCR Isolated Module: Pow-R-Blok

Uploaded by

Copyright:

Available Formats

Dual SCR Isolated Module: Pow-R-Blok

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dual SCR Isolated Module: Pow-R-Blok

Uploaded by

Copyright:

Available Formats

LD43__43

Powerex Dual SCR Modules are

LD43 Outline Dimensions

Select the complete eight-digit

Electrically Isolated Heatsinking

Note: Dimensions are for reference only.

Revision Date: 03/06/2015

Absolute Maximum Ratings

Repetitive Peak Forward and Reverse Blocking

VDRM & VRRM

180 Conduction, TC=80C

Peak One Cycle Surge Current, Non-Repetitive

60 Hz, 100% VRRM reapplied, Tj=25C

Peak Three Cycle Surge Current, Non-Repetitive

60 Hz, 100%VRRM reapplied, Tj=125C

Peak Ten Cycle Surge Current, Non-Repetitive

60 Hz, 100%VRRM reapplied,Tj=125C

I t for Fusing for One Cycle (No Vrrm reapplied)

I t for Fusing for One Cycle (100% Vrrm reapplied)

Maximum Rate-of-Rise of On-State Current,

8.3 milliseconds, Tj=25C

8.3 milliseconds, Tj=125C

8.3 milliseconds, Tj=25C

8.3 milliseconds, Tj=125C

Per JEDEC Standard 397 5.2.2.6

Module Weight, Typical

Revision Date: 03/06/2015

Electrical Characteristics, TJ=25C unless otherwise specified

Repetitive Peak Forward Leakage Current

Repetitive Peak Reverse Leakage Current

Peak On-State Voltage

Threshold Voltage, Low-level

TJ = 125C, I = 15%IT(AV) to IT(AV)

Threshold Voltage, High-level

TJ = 125C, I = IT(AV) to ITSM

VTM Coefficients, Full Range

VTM = V(TO)1 + rT1 I

Gate Trigger Current

Gate Trigger Voltage

Non-Triggering Gate Voltage

Tj=125C, VD= VDRM

Peak Forward Gate Current

Peak Reverse Gate Voltage

Thermal Resistance, Junction to Case

Per Module, both conducting

Thermal Impedance Coefficients

Thermal Resistance, Case to Sink Lubricated

Revision Date: 03/06/2015

Maximum On-State Forward Voltage Drop

Maximum Transient Thermal Impedance

Thermal Impedance - Rjc - C/W

On-State Voltage - Vtm - Volts

Max. Case Temperature - Tcase -C_

Max. Power Dissipation Per SCR - Watts_

Maximum Allowable Case Temperature

Maximum On-State Power Dissipation

Average On-State Current - It(av) - Amperes

Average On-State Current - Itm(av) - Amperes