7216 Parker Hose
7216 Parker Hose
7216 Parker Hose
Petroleum Transport
Trademark
7204
MPW-1000
7216
TRANSLITE
7216E
TRANSLITE
7217
TRANSLITE
7219
EZ FORM
7330
7705
GREEN LABEL
Hose Application/Construction /
Selector Guide
Tube
Nitrile
Chloroprene 1/2 - 1
Nitrile
Nitrile
Nitrile
Nitrile
Synthetic
1-4
rubber
Chloroprene 1 - 4
Nitrile
Tank truck,
heavy duty
Tank truck,
specialty
ES145
EW353
SP100
XSP100
SP204
LIGHT-N-BRIGHT
SP353
LIGHT-N-BRIGHT
SS107
SS107R
SS254
SW333
SW387
SWC316
PETROMAX
SWC316R
PETROMAX
SWC325
SWC609
ARCTIC
TRANSLITE
TITANFLEX
SWC609R
TITANFLEX
Tank truck,
gravity drop
Tank truck,
gravity drop
Tank truck,
discharge
Tank truck,
discharge
Tank truck,
discharge
Tank truck,
heavy duty
Hot tar &
asphalt
Tank truck,
standard duty
Tank truck,
standard duty
Tank truck,
specialty
Tank truck,
standard duty
Tank truck,
standard duty
Temp
Range
(F)
Page
No.
1000
-20/+300/350
230
75-150
-40/+180
215
150
-35/+180
216
150
-40/+180
215
Chloroprene 1/2 - 4
75
-20/+200
233
Nitrile
Chloroprene 1-1/4 - 6
250-300
-20/+180
218
Corrugated,
black
Custom
Made Hose
Custom
Made Hose
PVC banding
coil
PVC abrasion
coil
PVC external
helix
PVC external
helix
Black
Nitrile
Nitrile/PVC
1-4
150-200
-20/+180
221
Nitrile
Nitrile
1-1/2 - 6
300
-40/+180
228
Nitrile
Nitrile
10 - 12
65-75
-40/+180
226
n/a
n/a
2-6
n/a
n/a
225
n/a
n/a
2-6
n/a
n/a
225
Nitrile
Nitrile
2-6
75-100
-40/+150
223
Nitrile
Nitrile
2-6
150
-40/+150
224
Nitrile
Nitrile
1-1/4 - 6
150-250
-40/+180
227
Red
Nitrile
Chloroprene 1-1/2 - 4
150-250
-40/+180
227
Black
Nitrile
Nitrile
6-8
150
-40/+180
229
Black
Nitrile
Nitrile
2-6
250
-40/+180
217
High temp
Nitrile
Nitrile
1-1/2 - 4
150
-40/+300/350
232
Corrugated,
black
Corrugated,
red
Low temp
Nitrile
Nitrile
1-1/2 - 6
125-150
-40/+180
220
Nitrile
Nitrile
1-1/2 - 6
125-150
-40/+180
220
Nitrile
Nitrile
1-1/2 - 6
125-150
-67/+180
222
Corrugated,
black
Corrugated,
red
Nitrile
Nitrile
1-1/2 - 6
125-250
-40/+180
219
Nitrile
Nitrile
1-1/2 - 6
125-250
-40/+180
219
High temp,
high pressure
Smooth,
black
Smooth, red
Smooth,
black
Greek
corrugated,
kink free
Cover
Size
Range
(in)
1-8
Pressure
Range
(psi)
NOTE: This is a guide only. It is the responsibility of the end user to select and/or test the most appropriate product for the application. Refer
to product pages for specific data. Contact Parker for additional information.
Refer to pages 9-10 for a complete listing of industry standards.
See pages ii through iv for an index of all product series by series number and pages v through xv for an index by
application and by series name.
For Refined Fuel/Hose Compatibility Table, refer to pages 213 and 214.
Due to continual product improvements, Parker reserves the right to alter specifications without prior notice.
212
LEGEND
A: Acceptable for use with the designated fuel, and can be interchanged/used with other A media in the same row.
D: Acceptable for use with the designated fuel, but only for DEDICATED service with that designated fuel.
Not interchangable/for use with any other fuelprior to or subsequent touse with the dedicated fuel.
X: Not acceptable for use with the designated fuel in any application.
NOTES: This table only implies compatiability with the designated fuels.
A or D ratings do not imply compliance with government or industry regulations or specifications in any application.
Series
389
395
397
1000
2100
3100
4100
4500
5100
7102
7114
7124
7165
7174
7175
7204
7208E
7212
7213E
7216/7217
7216E
7219
7234
7280
7301
7307
7309
7330
7705
7775
7776
7776CT
7777
ES145
EW339
EW353
EW399
EW499
EWC439
SP204
SP353
Tube
Nitrile
Nitrile
Nitrile
Composite
Composite
Composite
Composite
Composite
Composite
Nitrile
Nitrile
Nitrile
Nylon
Nitrile
Nitrile
Nitrile
Nitrile/SBR
Nitrile
Nitrile/SBR
Nitrile
Nitrile
Nitrile
Chloroprene
Nitrile
Chloroprene
SBR
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
FKM
FKM
Nitrile
Nitrile
Nitrile
Av Gas
D
D
D
D
D
D
D
D
D
D
X
X
X
D
D
D
X
D
X
X
X
D
A
D
D
D
D
D
D
D
D
D
D
D
D
Gasoline
A
A
A
A
A
D
A
D
D
A
X
A
X
A
A
A
X
D
X
X
X
A
A
A
A
A
A
A
A
A
A
A
A
A
A
To E100
D
D
D
D
D
D
A
D
D
A
X
X
X
D
D
A
D
D
D
X
X
D
A
D
D
D
D
A
A
A
X
X
A
D
D
Ethanol
To E15
A
A
A
A
A
A
A
A
A
A
X
A
X
A
A
A
X
A
X
X
X
A
A
A
A
A
A
A
A
A
X
X
A
A
A
Diesel
To E85
A
A
A
A
A
A
A
A
A
A
X
D
X
A
A
A
X
A
X
X
X
A
A
A
A
A
A
A
A
A
X
X
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
X
A
X
A
A
A
X
A
X
X
X
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Biodiesel
To B20
To B100
A
X
A
X
A
A
A
A
A
A
A
A
A
A
A
A
A
A
D
X
D
X
D
X
A
A
D
X
D
X
A
X
X
X
D
X
X
X
D
X
D
X
A
X
X
X
D
X
X
X
X
X
X
X
D
D
A
A
D
D
D
D
D
D
D
D
D
D
X
X
D
D
X
X
X
X
X
X
D
D
D
D
213
Petroleum Transport
Petroleum Transport
Tube
Nitrile
Nitrile/SBR
Nitrile/SBR
Nitrile/SBR
Nitrile
Nitrile/SBR
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile/SBR
Nitrile
Nitrile
Av Gas
D
X
X
X
D
X
D
D
D
D
D
D
D
X
D
D
Gasoline
A
X
X
X
A
X
A
A
A
A
D
A
A
X
A
A
To E100
D
X
X
X
D
X
D
D
D
D
D
D
D
X
D
A
214
Ethanol
To E15
A
X
X
X
A
X
A
A
A
A
D
A
A
X
A
A
Diesel
To E85
A
X
X
X
A
X
A
A
A
A
D
A
A
X
A
A
A
X
D
X
A
X
A
A
A
A
D
A
A
X
A
A
Biodiesel
To B20
To B100
D
D
X
X
X
X
X
X
D
D
X
X
D
D
D
D
D
D
D
D
D
D
D
D
D
D
X
X
D
D
X
X
WARNINGS!
Couplings attached with bands or
clamps may reduce the working
pressure of the hose assembly to
less than the maximum rated working
pressure of the hose. Refer to the
NAHAD Industrial Hose Assembly
Guidelines.
Do not use for oil or fuel transfer
service in or on open water.
Black nitrile
Multiple textile plies with wire helix
7216: Black nitrile; wrapped finish
7217: Red chloroprene; wrapped finish
Temp. Range:
-40F to +180F (-40C to +82C)
Brand Method:
7216: Black text on orange stripe
7217: Red text on white stripe
Brand Example:
7216: PARKER SERIES 7216/SW309 TRANSLITE TANK
TRUCK HOSE XXX PSI MAX WP MADE IN USA (LOT #)
7217: PARKER SERIES 7217 TRANSLITE TANK TRUCK
HOSE 150 PSI MAX WP MADE IN USA (LOT #)
Design Factor:
4:1
Industry Standards: None applicable
Biodiesel (to B20 in dedicated service), diesel, ethanol,
Applications:
gasoline, oil
In-plant and storage tank transfer
Delivery, transport
Vacuum:
Full
Compare to:
Boston Puma; Gates Longhorn; Veyance Plicord Flexwing
Coils
Packaging:
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
7216
7217
Stock Stock
Status Status
**
**
-1002
25.4
1.364
34.6
0.42
0.19
2.0
50.8
150
10.3
100
-1252
1-1/4
31.8
1.670
42.4
0.59
0.27
3.0
76.2
150
10.3
100
-1502
1-1/2
38.1
1.968
50.0
0.83
0.38
4.0
101.6
150
10.3
RST
100
-2002
50.8
2.520
64.0
1.14
0.52
6.0
152.4
150
10.3
RE, RST,
100
TM
-2502
2-1/2
63.5
3.028
76.9
1.43
0.65
9.0
228.6
150
10.3
100
-3002
76.2
3.543
90.0
1.83
0.83
12.0
304.8
150
10.3
RE, RST,
100
100
TM
-4002
101.6
4.656 118.3
2.97
1.35
16.0
406.4
150
10.3
HAPS
-5004***
127.0
5.787 147.0
4.46
2.02
39.0
990.6
150
10.3
100
n/a
-6004***
152.4
6.811 173.0
5.79
2.63
48.0
1219.2
150
10.3
100
n/a
-8004***
203.2
8.976 228.0
9.42
4.27
72.0
1828.8
75
5.2
50
n/a
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
*** Series 7216 only.
Parker Industrial Hose Customer Service
866 810 HOSE (4673) 800 242 HOSE (4673)
Strongsville, OH
South Gate, CA
Eastern USA
Western USA
www.safehose.com
e-mail: indhose@parker.com
215
Petroleum Transport
TRANSLITE
Petroleum Transport
TRANSLITE
Series 7216E is a lightweight suction and discharge hose designed to handle oil and refined
fuels such as biodiesel (to B20 in dedicated service), diesel, ethanol and gasoline. The hose
construction incorporates a wire helix that provides full suction capability, kink resistance,
and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion,
oil and weathering.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Industry Standards:
Applications:
Vacuum:
Compare to:
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Black nitrile
Multiple textile plies with dual wire helix
Black synthetic rubber; wrapped finish
-35F to +180F (-37C to +82C)
Black text on orange stripe
PARKER SERIES 7216E TANK TRUCK HOSE 150 PSI MAX WP
None applicable
Biodiesel (to B20 in dedicated service), diesel, ethanol, gasoline, oil
In-plant and storage tank transfer
Delivery, transport
Full
Boston Puma; Gates Longhorn; Kuriyama T605AA; Veyance Plicord
Flexwing Petroleum
Coils
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
7216E-1002
25.4
1.300
33.0
0.47
0.21
3.0
76.2
150
10.3
43
100
7216E-1252
1-1/4
38.1
1.690
42.4
0.65
0.29
4.0
102.0
150
10.3
43
100
7216E-1502
1-1/2
38.1
2.000
49.8
0.92
0.42
5.0
127.0
150
10.3
43
100
7216E-2002
50.8
2.500
63.8
1.10
0.50
6.0
152.4
150
10.3
43
100
7216E-2502
2-1/2
63.5
3.000
76.9
1.55
0.70
7.0
177.8
150
10.3
100
7216E-3002
76.2
3.660
93.0
2.08
0.94
8.0
203.2
150
10.3
100
7216E-4002
102.0
4.650
117.5
2.80
1.27
11.0
279.4
150
10.3
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
216
Series SW333
Series SW333 is a medium pressure suction and discharge hose designed to handle oil and
refined fuels such as biodiesel (to B100 in dedicated service), diesel, ethanol and gasoline
in bulk loading and unloading applications. The hose construction incorporates a dual wire
helix that provides full suction capability, kink resistance, and a path to conduct a static
electrical charge to ground. The nitrile cover is resistant to abrasion, oil and weathering.
Series SW333 is available in 200-foot continuous lengths.
NOTES: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Do not use Series SW333 in dock service.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with dual wire helix
Black nitrile; wrapped finish
-40F to +180F (-40C to +82C)
Black text on red stripe
PARKER SERIES SW333 PETROLEUM SUCTION & DISCHARGE HOSE
250 PSI NOT FOR DOCK SERVICE MADE IN USA
4:1
Design Factor:
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
High pressure in-plant and storage tank transfer
High pressure bulk loading/unloading rail cars and tank trucks,
delivery, transport
Vacuum:
Full
Coils
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
SW333-2000
50.8
2.622
66.6
1.51
0.68
8.0
203.2
250
17.2
100
SW333-3000
76.2
3.654
92.8
SW333-4000
101.6
4.842
123.0
2.29
1.04
12.0
304.8
250
17.2
100
3.95
1.79
18.0
457.2
250
17.2
100
SW333-6000
152.4
6.929
176.0
6.22
2.82
30.0
762.0
250
17.2
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
Caution: Not for dock hose service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
217
Petroleum Transport
Petroleum Transport
Series 7330 is a heavy duty, high pressure suction and discharge hose designed to handle
oil and refined fuels such as biodiesel (to B100 in dedicated service), diesel, ethanol and
gasoline. The elevated working pressure is suitable for bulk loading and unloading. The hose
construction incorporates a wire helix that provides full suction capability, kink resistance,
and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion,
oil and weathering. Series 7330 is available in 200-foot continuous lengths.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with helix wire
Black chloroprene, wrapped finish
-20F to +180F (-29C to +82C)
Red text on white stripe
PARKER SERIES 7330 HD TANK TRUCK 300 PSI MAX WP
MADE IN USA (LOT #)
Design Factor:
4:1
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
High pressure in-plant and storage tank transfer
High pressure bulk loading/unloading; delivery, transport
Vacuum:
Full
Veyance Plicord Super Black Flexwing
Compare to:
Packaging:
Coils
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
7330-1250
1-1/4
31.8
1.686
42.8
0.71
0.32
6.0
152.4
300
20.7
100
7330-1500
1-1/2
38.0
1.976
50.2
1.00
0.45
8.0
203.2
300
20.7
100
N
N
7330-2000
50.8
2.622
66.6
1.57
0.71
8.0
203.2
300
20.7
100
7330-2000200
50.8
2.622
66.6
1.57
0.71
8.0
203.2
300
20.7
200
7330-3000
76.2
3.654
92.8
2.41
1.09
15.0
381.0
300
20.7
TM
100
7330-3000200
76.2
3.654
92.8
2.41
1.09
15.0
381.0
300
20.7
TM
200
7330-4000
101.6
4.840
123.0
4.12
1.87
20.0
508.0
300
20.7
100
7330-4000200
101.6
4.840
123.0
4.12
1.87
20.0
508.0
300
20.7
200
7330-6000
152.4
6.968
177.0
6.99
3.17
36.0
914.4
300
20.7
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
218
Black nitrile
Multiple textile plies with dual wire helix
SWC609: Black nitrile; corrugated wrapped finish
SWC609R: Red nitrile; corrugated wrapped finish
Temp. Range:
-40F to +180F (-40C to +82C)
SWC609: Red text on black stripe
Brand Method:
SWC609R: White text on red stripe
Brand Example:
PARKER SERIES SWC609(R) TITANFLEX
PETROLEUM SUCTION HOSE XXX PSI WP MADE IN
USA
Design Factor:
4:1
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel,
ethanol, gasoline, oil
In-plant and storage tank transfer
Delivery, transport
Vacuum:
Full
Boston Bobcat; Gates Longhorn; Thermoid
Compare to:
Transporter; Veyance Flextra
Packaging:
Coils
WARNINGS!
Couplings attached with bands or clamps
may reduce the working pressure of the
hose assembly to less than the maximum
rated working pressure of the hose. Refer
to the NAHAD Industrial Hose Assembly
Guidelines.
Do not use for oil or fuel transfer service in
or on open water.
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
-1250***
1-1/4
31.8
1.690
42.9
0.63
0.29
1.3
33.0
250
17.2
100
n/a
-1500
1-1/2
38.1
1.950
49.5
0.78
0.36
1.5
38.1
250
17.2
43
100
-2000
50.8
2.450
62.2
1.00
0.45
2.0
50.8
250
17.2
43
100
-2500
2-1/2
63.5
3.000
76.2
1.44
0.65
2.5
63.5
200
13.8
100
-3000
76.2
3.580
90.9
1.70
0.77
3.0
76.2
200
13.8
100
-4000
101.6
4.625
117.5
2.41
1.09
4.0
101.6
150
10.3
100
-6000***
152.4
6.750
171.5
4.30
1.95
8.0
203.2
125
8.6
100
n/a
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
*** Series SWC609 only.
219
Petroleum Transport
TITANFLEX
Petroleum Transport
PETROMAX
WARNINGS!
Couplings attached with bands or clamps
may reduce the working pressure of the
hose assembly to less than the maximum
rated working pressure of the hose. Refer
to the NAHAD Industrial Hose Assembly
Guidelines.
Do not use for oil or fuel transfer service in
or on open water.
Black nitrile
Multiple textile plies with dual wire helix
SWC316: Black nitrile; corrugated wrapped finish
SWC316R: Red nitrile; corrugated wrapped finish
Temp. Range:
-40F to +180F (-40C to +82C)
SWC316: Black text on red stripe
Brand Method:
SWC316R: Black text on white stripe
Brand Example:
PARKER SERIES SWC316(R) PETROMAX PETROLEUM
SUCTION & DISCHARGE HOSE XXX PSI WP MADE IN
USA
Design Factor:
4:1
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel,
ethanol, gasoline, oil
In-plant and storage tank transfer
Delivery, transport
Vacuum:
Full
Boston Puma; Gates Longhorn; Kuriyama T605AA;
Compare to:
Veyance Plicord Flexwing Petroleum
Packaging:
Coils
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
-1000
25.4
1.563
39.7
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
0.60
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
3.0
7.6
150
10.3
100
0.27
SWC316 SWC316R
Stock
Stock
Status
Status
**
**
-1500
1-1/2
38.1
2.063
52.4
0.84
0.38
4.0
10.2
150
10.3
100
-2000
50.8
2.563
65.1
1.19
0.54
5.0
12.7
150
10.3
100
-2500
2-1/2
63.5
3.063
77.8
1.45
0.66
6.0
15.2
150
10.3
100
-3000
76.2
3.594
91.3
1.97
0.89
9.0
22.9
150
10.3
100
-4000
101.6
4.594
116.7
2.78
1.26
12.0
30.5
150
10.3
100
-6000
152.4
6.750
171.5
4.89
2.22
18.0
45.7
125
8.6
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
220
Series 7705 is a flexible, medium pressure suction and discharge hose designed to handle
oil and refined fuels such as biodiesel (to B100 in dedicated and non-dedicated service),
diesel, ethanol and gasoline. The corrugated hose construction incorporates a dual wire
helix that provides full suction capability, flexibility, kink resistance, and a path to conduct
a static electrical charge to ground. The nitrile/PVC cover is resistant to abrasion, oil and
weathering, and is available in 200-foot continuous lengths.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with dual wire helix
Black nitrile/PVC; corrugated wrapped finish
-20F to +180F (-29C to +82C)
Black text on green stripe
PARKER SERIES 7705 GREEN LABEL TANK TRUCK HOSE XXX PSI
MAX WP MADE IN USA
4:1
Design Factor:
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated and non-dedicated service), diesel,
ethanol, gasoline, oil
In-plant and storage tank transfer
Delivery, transport
Vacuum:
Full
Coils
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
7705-1000
25.4
1.437
36.5
0.55
7705-1250
1-1/4
31.8
1.693
43.0
0.70
7705-1500
1-1/2
38.1
1.969
50.0
0.83
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
0.25
2.0
50.8
200
13.8
43
100
0.32
2.5
63.5
200
13.8
100
0.38
3.0
76.2
200
13.8
43
100
7705-2000
50.8
2.440
62.8
1.00
0.45
4.0
101.6
200
13.8
43
100
7705-2500
2-1/2
63.5
2.953
75.0
1.37
0.62
5.0
127.0
200
13.8
100
7705-3000
76.2
3.488
88.6
1.75
0.79
5.0
127.0
200
13.8
100
7705-4000
101.6
4.527
115.0
2.33
1.06
6.0
152.4
150
10.3
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
221
Petroleum Transport
GREEN LABEL
Petroleum Transport
ARCTIC TRANSLITE
Series SWC325 is a flexible, lightweight, low temperature suction and discharge hose
designed to handle oil and refined fuels such as biodiesel (to B100 in dedicated service),
diesel, ethanol and gasoline. The corrugated hose construction incorporates a dual wire
helix that provides full suction capability, flexibility and kink resistanceeven in the
harshest cold climate conditions to -67F (-55C)and a path to conduct a static electrical
charge to ground. The cover is resistant to abrasion, oil and weathering.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with dual wire helix
Black nitrile; corrugated wrapped finish
-67F to +180F (-55C to +82C)
White text on blue stripe
PARKER SERIES SWC325 ARCTIC TRANSLITE -67F LOW-TEMP
TANK TRUCK HOSE XXX PSI WP MADE IN USA
4:1
Design Factor:
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
Low temperature in-plant and storage tank transfer
Low temperature delivery, transport
Vacuum:
Full
Coils
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
SWC325-1500
1-1/2
38.1
2.080
52.8
0.83
0.38
1.5
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
3.8
150
10.3
C&G, HAPS,
100
100
Y
N
TM
SWC325-2000
50.8
2.580
65.5
1.19
0.54
2.0
5.1
150
10.3
C&G
SWC325-2500
2-1/2
63.5
3.120
79.2
1.56
0.71
2.5
6.4
150
10.3
100
SWC325-3000
76.2
3.680
93.5
2.12
0.96
3.0
7.6
150
10.3
C&G, TM
100
SWC325-4000
101.6
4.680
118.9
2.79
1.27
4.0
10.2
150
10.3
C&G, TM
100
SWC325-6000
152.4
6.750
171.5
4.87
2.21
6.0
15.2
125
8.6
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
NOTE: C&G (above) designates crimped-on Cam and Groove couplings.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
222
Series SP204
Series SP204 is an extremely flexible, lightweight drop hose designed to handle oil and
refined fuels such as biodiesel (to B100 in dedicated service), diesel, ethanol and gasoline
in gravity flow or suction applications. The lightweight hose construction incorporates a
static wire as a path to conduct an electrical charge to ground, and the cover features an
external PVC helix for full suction capability, flexibility and superior abrasion, crush and
kink resistance. Series SP100 banding coils are recommended for installation of couplings.
Series XSP100 abrasion coils are available for maximum abrasion resistance along the entire
length of the hose.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Design Factor:
Industry Standards:
Applications:
Vacuum:
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
SP204-2000
50.8
SP204-3000
76.2
SP204-4000
101.6
SP204-6000
152.4
Black nitrile
Multiple textile plies with static wire
Black nitrile with external orange PVC helix
-40F to +150F (-40C to +65C)
Solid gray stripe
Not branded
4:1
None applicable
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
In-plant and storage tank transfer; transport, delivery
Drop/gravity flow service
Full
Coils
OD
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Std Pack
Qty
(ft)
Stock
Status
**
3.000
76.2
1.23
0.56
4.0
101.6
100
7.0
100
4.000
101.6
1.76
0.80
6.0
152.4
100
7.0
100
5.000
127.0
2.30
1.04
8.0
203.2
100
7.0
100
7.000
177.8
3.50
1.59
12.0
304.8
75
5.0
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
223
Petroleum Transport
LIGHT-N-BRIGHT Plus
Petroleum Transport
LIGHT-N-BRIGHT
Series SP353
Series SP353 is a flexible, lightweight drop hose designed to handle oil and refined fuels
such as biodiesel (to B100 in dedicated service), diesel, ethanol and gasoline in gravity
flow, higher pressure pump-off, or suction applications. The lightweight hose construction
incorporates a static wire as a path to conduct an electrical charge to ground, and the cover
features an external PVC helix for full suction capability, flexibility and superior abrasion,
crush and kink resistance. Series SP100 banding coils are recommended for installation
of couplings. Series XSP100 abrasion coils are available for maximum abrasion resistance
along the entire length of the hose.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Design Factor:
Industry Standards:
Applications:
Vacuum:
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
Black nitrile
Multiple textile plies with static wire
Black nitrile with external red PVC helix
-40F to +150F (-40C to +65C)
Solid gray stripe
Not branded
4:1
None applicable
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
In-plant and storage tank transfer; transport, delivery
Drop/gravity flow, pump-off service
Full
Coils
OD
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Std Pack
Qty
(ft)
Stock
Status
**
SP353-2000
50.8
3.000
76.2
1.25
0.57
6.0
152.4
150
10.3
100
SP353-3000
76.2
4.000
101.6
1.78
0.81
8.0
203.2
150
10.3
100
SP353-4000
101.6
5.000
127.0
2.32
1.05
10.0
254.0
150
10.3
100
SP353-6000
152.4
7.000
177.8
3.49
1.58
24.0
609.6
150
10.3
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
224
Series SP100/XSP100
Series SP100 is a rugged PVC coil that threads onto a complementary hose end to create
a uniform banding area for coupling attachment. The coil fills the gaps between the loops
of the outer PVC helix, providing an area for securing the banding clamp or ferrule. Series
XSP100 threads onto the entire length of a complementary hose to protect it from abrasion
and scuffs, helping to extend hose life in highly abrasive areas. Series SP100 and XSP100 are
applied to Parker SP204, SP330, SP353 and SP483 hoses.
SP100 (ea)
Part
Number
Hose
ID
(in)
Hose
ID
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Turns
Stock
Status
**
SP100-2000
50.8
0.19
0.09
SP100-3000
76.2
0.33
0.15
10
SP100-4000
101.6
0.46
0.21
10
SP100-6000
152.4
1.02
0.46
16
XSP100 (ft)
Part
Number
Hose
ID
(in)
Hose
ID
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Ft.
Stock
Status
**
XSP100-2000
50.8
0.19
0.09
100
XSP100-3000
76.2
0.33
0.15
100
XSP100-4000
101.6
0.46
0.21
100
XSP100-6000
152.4
1.02
0.46
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status
subject to change. Contact Parker Customer Service.
Optional Colors: Gray, Green, Red, Sand Matte. Specify color when ordering.
225
Petroleum Transport
Petroleum Transport
Series EW353 is a custom designed, large diameter heavy duty suction and discharge hose
to handle oil and refined fuels such as biodiesel (to B100 in dedicated service), diesel,
ethanol and gasoline. The hose construction incorporates a dual wire helix that provides
full suction capability, kink resistance, and a path to conduct a static electrical charge to
ground. The cover is resistant to abrasion, oil and weathering. Series EW353 is compatible
with 50% aromatics.
NOTES: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Other customized versions of this product are available. Contact Parker.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with wire helix
Black nitrile; wrapped finish
-40F to +180F (-40C to +82C)
Black text on red stripe
PARKER SERIES EW353 HEAVY DUTY TANK TRUCK HOSE
MADE IN USA
Design Factor:
4:1
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
In-plant and storage tank transfer
Bulk loading/unloading rail cars and tank trucks; delivery, transport
Vacuum:
Full
Straight lengths
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Std
Pack
Qty
(ft)
EW353-8000
203.2
9.250
235.0
12.08
5.48
42.0
1066.8
150
10.3
n/a
EW353-10000
10
254.0
11.000
279.4
13.00
5.90
60.0
1524.0
75
5.2
n/a
EW353-12000
12
304.8
13.250
336.6
18.00
8.16
72.0
1828.8
65
4.5
n/a
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
226
Black nitrile
Multiple textile plies with static wire
SS107: Black nitrile, wrapped finish
SS107R: Red chloroprene, wrapped finish
Temp. Range:
-40F to +180F (-40C to +82C)
SS107: White text on black stripe
Brand Method:
SS107R: White text on red stripe
Brand Example:
PARKER SERIES SS107(R) FUEL DISCHARGE XXX PSI
WP MADE IN USA
Design Factor:
4:1
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel, ethanol,
gasoline, oil
In-plant and storage tank transfer/discharge
Delivery/transport discharge
Vacuum:
Not recommended
Gates Steer; Veyance Plicord Fuel Delivery
Compare to:
Packaging:
Coils
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Max
Rec WP
(psi)
Max
Rec WP
(bar)
Perm
Cplg
Rec
*
Std Pack
Qty
(ft)
SS107
Stock
Status
**
SS107R
Stock
Status
**
-1250
1-1/4
31.8
1.598
40.6
0.42
0.19
250
17.2
100
-1500
1-1/2
38.1
1.843
46.8
0.49
0.22
250
17.2
100
-2000
50.8
2.456
62.4
0.89
0.40
200
13.8
100
-3000
76.2
3.456
87.8
1.28
0.58
200
13.8
100
-4000
101.6
4.543
115.4
1.83
0.83
200
13.8
100
-6000
152.4
6.670
169.4
3.39
1.54
200
13.8
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
227
Petroleum Transport
Petroleum Transport
Series ES145 is a custom designed heavy duty, high pressure discharge hose to handle
oil and refined fuels such as biodiesel (to B100 in dedicated service), diesel, ethanol and
gasoline. The hose construction incorporates a static wire as a path to conduct an electrical
charge to ground. The cover is resistant to abrasion, oil and weathering.
NOTES: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Other customized versions of this product are available. Contact Parker.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with static wire
Black nitrile; wrapped finish
-40F to +180F (-40C to +82C)
Black text on yellow stripe
PARKER SERIES ES145 HEAVY DUTY OIL AND GAS HOSE 300 PSI WP
MADE IN USA
4:1
Design Factor:
Industry Standards: None applicable
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
Applications:
High pressure in-plant and storage tank transfer/discharge
High pressure bulk loading rail cars and tank trucks; delivery/transport
discharge
Vacuum:
Not recommended
Coils
Packaging:
Couplings:
Per customer specifications
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Max
Rec WP
(psi)
Max
Rec WP
(bar)
Std Pack
Qty
(ft)
ES145-1500
1-1/2
38.1
2.375
60.3
1.34
0.61
300
21
100
ES145-2000
50.8
2.875
73.0
1.69
0.77
300
21
100
ES145-3000
76.2
3.875
98.4
2.34
1.06
300
21
100
ES145-4000
101.6
4.875
123.8
3.11
1.41
300
21
100
ES145-6000
152.4
7.063
179.4
5.64
2.56
300
21
100
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
228
Series SS254
Series SS254 is a large diameter, lightweight discharge hose designed to handle oil and
refined fuels such as biodiesel (to B100 in dedicated service), diesel, ethanol and gasoline.
The hose construction incorporates a static wire as a path to conduct an electrical charge to
ground. The cover is resistant to abrasion, oil and weathering.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with static wire
Black nitrile; wrapped finish
-40F to +180F (-40C to +82C)
Black text on red stripe
PARKER SERIES SS254 OIL & GAS DISCHARGE 150 PSI WP
MADE IN USA
Design Factor:
4:1
Industry Standards: None applicable
Applications:
Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
In-plant and storage tank transfer/discharge
Delivery/transport discharge
Vacuum:
Not recommended
Coils
Packaging:
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Max
Rec WP
(psi)
Max
Rec WP
(bar)
Perm
Cplg
Rec
*
Std Pack
Qty
(ft)
Stock
Status
**
SS254-6000
152.4
6.844
173.8
4.25
1.93
150
10.3
100
SS254-8000
203.2
8.844
224.6
5.74
2.60
150
10.3
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNINGS!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
Do not use for oil or fuel transfer service in or on open water.
229
Petroleum Transport
Petroleum Transport
MPW-1000
Series 7204 is an extremely versatile hose designed to handle air, mild chemicals, oil, refined
fuels such as biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol
and gasoline, saturated steam and water. The hose construction incorporates a premium
grade tube especially suited for high temperature materials such as hot asphalt, glue, oil, tar
and wax to 300F continuous/350F intermittent (149C/177C). The high tensile wire braid
reinforcement provides durability, kink resistance, high pressure capability and superior
coupling retention, and the cover is resistant to heat, oil and weathering. Series 7204 is also
designed for saturated steam applications at temperatures to 368F (187C) and pressures to
150 psi (10.3 bar). The tube resists popcorning and oil-based detergents and rust inhibitors
found in steam systems.
NOTES: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Do not use for fuel dispensing service applications requiring API, NFPA, UL, ULC
or any other agency approval or listing.
Tube:
Reinforcement:
Cover:
Temp. Range:
Black nitrile
One wire braid
Black chloroprene; perforated wrapped finish
Steam: -20F to +368F (-29C to +187C) saturated steam to
150 psi max WP
Other: -20F to +300F (-29C to +149C) / 350 (177C) intermittent
Brand Method:
Embossed
PARKER SERIES 7204 MPW-1000 PSI MAX WP (150 PSI MAX WP Brand Example:
STEAM) (DATE CODE) MADE IN USA
Design Factor:
4:1 (10.1 Steam)
Industry Standards: None applicable
Applications:
Air, mild chemicals, oil, water; hot asphalt, glue, oil, tar and wax;
steam; biodiesel (to B20 in dedicated and non-dedicated service),
diesel, ethanol, gasoline
High pressure washdown; cleaning containment vessels and
manufacturing equipment; cleaning and heating processing equipment
Construction, general industrial, refineries
Not recommended
Vacuum:
Compare to:
Boston Hot Tar Pumping; Gates 319MB Gold Master; Veyance Pyroflex
Reels
Packaging:
WARNINGS!
Failure to properly inspect, maintain, test and use steam hose assemblies may result in property damage, personal injury or death. Refer to
ARPM publication IP-11-1, Steam Hose, Guide for Maintenance, Testing and Inspection.
Water changes to hot water and phases of steam when subjected to heat and pressure. The greater the pressure, the higher the
temperature required to achieve and maintain a steam phase. If steam escapes, dangerous quantities of heat may be released very
suddenly. Exposure to hot water, low pressure steam and high pressure steam may cause severe scalding or fatal burns.
Use only hoses designated for steam service for steam applications. Use ONLY Parker recommended hose/coupling combinations for
steam applications. Refer to CrimpSource at www.safehose.com.
Drain steam hose after each use to reduce the possibility of hose popcorning while in service.
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working
pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
230
Non-Steam Applications
Part
Number
ID
(in)
ID
(mm)
Reinf
Braids
OD
(in)
OD
(mm)
Approx
Wt
(lbs/ft)
Approx
Wt
(kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Max
Rec WP
Rec WP
(psi)
(bar)
Non-Steam Applications
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
7204-501
1/2
12.7
0.906
23.0
0.34
0.15
7.0
177.8
1000
69.0
43
500
7204-751
3/4
19.1
1.187
30.1
0.52
0.24
9.5
241.3
1000
69.0
43
500
7204-1001
25.4
1.500
38.1
0.75
0.34
12.0
304.8
1000
69.0
43
500
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
231
Petroleum Transport
Petroleum Transport
Series SW387 is a suction and discharge hose designed to handle high temperature
materials such as hot asphalt, glue, oil, tar and wax to 300F continuous/350F intermittent
(149C/177C). The hose also handles refined fuels such as biodiesel (to B100 in dedicated
service), diesel, ethanol and gasoline. The hose construction incorporates a dual wire helix
that provides full suction capability, kink resistance and a path to conduct a static electrical
charge to ground. The cover is resistant to abrasion, heat, oil and weathering.
NOTE: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Black nitrile
Multiple textile plies with dual wire helix
Black nitrile; wrapped finish
-40F to +300F (-40C to +177C)
Black text on red stripe
PARKER SERIES SW387 HOT TAR & ASPHALT XXX PSI WP
MADE IN USA
Design Factor:
4:1
Industry Standards: None applicable
Applications:
Hot asphalt, glue, oil, tar and wax; biodiesel (to B100 in dedicated
service), diesel, ethanol, gasoline
In-plant and storage tank transfer
Delivery, transport applicator trucks
Vacuum:
Full
Boston Black Cat; Thermoid Transporter; Veyance Pyroflex
Compare to:
Packaging:
Coils
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
SW387-1500
1-1/2
38.1
2.125
54.0
0.98
SW387-2000
50.8
2.625
66.7
1.43
0.44
6.0
152.4
150
10.3
100
0.65
8.0
203.2
150
10.3
100
SW387-2500
2-1/2
63.5
3.375
85.7
SW387-3000
76.2
3.750
95.3
1.84
0.83
10.0
254.0
150
10.3
100
2.42
1.10
12.0
304.8
150
10.3
100
SW387-4000
101.6
4.813
122.2
3.60
1.63
18.0
457.2
150
10.3
100
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
!
WARNING!
Do not use for continuous service at 350F. Do not use above 350F for any service or any duration. Using above the
recommended service duration or temperature may lead to premature hose faliure and property damage, personal injury or death.
232
Series 7219 is an extremely flexible, lightweight, low pressure oil suction/return hose and
vehicle fuel fill connector lineas well as a suction and discharge hose for refined fuels
such as biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol and
gasoline. The lightweight Greek corrugated hose construction incorporates a wire helix
that provides full suction capability, superior kink resistance, minimal force-to-bend and
a path to conduct a static electrical charge to ground. The unique Greek corrugations are
tightly pitched and precision-engineered, providing extreme flexibility and kink resistance
compared to the conventional rounded corrugation profile. The cover is resistant to oil and
weathering. Series 7219 is capable of being routed through confined spaces where formed
hose might normally be required.
NOTES: Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Do not use in fuel dispensing or service applications requiring API, NFPA, UL,
ULC or any other agency approval or listing.
Do not drag across sharp edges or highly abrasive surfaces.
For E-Z FORM coolant, vacuum and water hose, refer to Series 7395.
Tube:
Reinforcement:
Cover:
Temp. Range:
Brand Method:
Brand Example:
Design Factor:
Industry Standards:
Applications:
Vacuum:
Packaging:
Black nitrile
Mutliple textile plies with wire helix
Black chloroprene; Greek corrugated finish
-20F to +200F (-29C to +93C)
Black text on red stripe
PARKER SERIES 7219 E-Z FORM MP HOSE 75 PSI MAX WP
4:1
None applicable
Biodiesel (to B20 in dedicated and non-dedicated service), diesel,
ethanol, gasoline, oil
Oil suction/return lines; vehicle fuel fill connector lines
Agricultural equipment, construction equipment, off-road equipment
Full
Coils
WARNING!
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the
maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
233
Petroleum Transport
E-Z FORM MP
Petroleum Transport
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
7219-0500025
1/2
12.7
0.906
23.0
0.23
7219-0500130
1/2
12.7
0.906
23.0
0.23
7219-0594025
19/32
15.1
0.984
25.0
7219-0594130
19/32
15.1
0.984
25.0
7219-0625025
5/8
15.9
1.024
7219-0625130
5/8
15.9
7219-0688025
11/16
17.5
7219-0688130
11/16
17.5
7219-0750025
3/4
7219-0750130
7219-0813025
7219-0813130
Std
Pack
Qty
(ft)
Stock
Status
**
0.10
1.4
35.6
75
5.2
HY
25
0.10
1.4
35.6
75
5.2
HY
130
0.25
0.11
1.8
45.7
75
5.2
HY
25
0.25
0.11
1.8
45.7
75
5.2
HY
130
26.0
0.27
0.12
1.8
45.7
75
5.2
HY
25
1.024
26.0
0.27
0.12
1.8
45.7
75
5.2
HY
130
1.102
28.0
0.29
0.13
1.8
45.7
75
5.2
25
1.102
28.0
0.29
0.13
1.8
45.7
75
5.2
130
19.1
1.142
29.0
0.31
0.14
2.0
50.8
75
5.2
HY
25
3/4
19.1
1.142
29.0
0.31
0.14
2.0
50.8
75
5.2
HY
130
13/16
20.6
1.181
30.0
0.32
0.15
2.0
50.8
75
5.2
25
13/16
20.6
1.181
30.0
0.32
0.15
2.0
50.8
75
5.2
130
7219-1000025
25.4
1.378
35.0
0.38
0.17
2.0
50.8
75
5.2
HY
25
7219-1000130
25.4
1.378
35.0
0.38
0.17
2.0
50.8
75
5.2
HY
130
7219-1125025
1-1/8
28.6
1.496
38.0
0.42
0.19
2.6
66.0
75
5.2
25
7219-1125130
1-1/8
28.6
1.496
38.0
0.42
0.19
2.6
66.0
75
5.2
130
7219-1188025
1-3/16
30.2
1.575
40.0
0.45
0.20
3.0
76.2
75
5.2
25
7219-1188130
1-3/16
30.2
1.575
40.0
0.45
0.20
3.0
76.2
75
5.2
130
7219-1250025
1-1/4
31.8
1.693
43.0
0.50
0.23
3.1
78.7
75
5.2
HY
25
7219-1250130
1-1/4
31.8
1.693
43.0
0.50
0.23
3.1
78.7
75
5.2
HY
130
7219-1375025
1-3/8
34.9
1.811
46.0
0.54
0.24
3.7
93.9
75
5.2
25
Y
N
7219-1375130
1-3/8
34.9
1.811
46.0
0.54
0.24
3.7
93.9
75
5.2
130
7219-1500025
1-1/2
38.1
1.929
49.0
0.58
0.26
3.9
99.1
75
5.2
43
25
7219-1500130
1-1/2
38.1
1.929
49.0
0.58
0.26
3.9
99.1
75
5.2
43
130
7219-1563025
1-9/16
39.7
2.008
51.0
0.61
0.28
4.3
109.2
75
5.2
25
7219-1563130
1-9/16
39.7
2.008
51.0
0.61
0.28
4.3
109.2
75
5.2
130
7219-1625025
1-5/8
41.3
2.087
53.0
0.64
0.29
4.7
119.4
75
5.2
25
7219-1625130
1-5/8
41.3
2.087
53.0
0.64
0.29
4.7
119.4
75
5.2
130
7219-1750025
1-3/4
44.5
2.205
56.0
0.68
0.31
5.1
129.5
75
5.2
25
7219-1750130
1-3/4
44.5
2.205
56.0
0.68
0.31
5.1
129.5
75
5.2
130
7219-2000025
50.8
2.480
63.0
0.96
0.44
5.9
149.9
75
5.2
43
25
7219-2000130
50.8
2.480
63.0
0.96
0.44
5.9
149.9
75
5.2
43
130
7219-2188025
2-3/16
55.6
2.638
67.0
1.03
0.47
7.1
180.3
75
5.2
25
7219-2188130
2-3/16
55.6
2.638
67.0
1.03
0.47
7.1
180.3
75
5.2
130
7219-2250025
2-1/4
57.1
2.756
70.0
1.08
0.49
7.9
200.7
75
5.2
25
7219-2250130
2-1/4
57.1
2.756
70.0
1.08
0.49
7.9
200.7
75
5.2
130
7219-2375025
2-3/8
60.3
2.874
73.0
1.11
0.50
8.3
210.8
75
5.2
25
7219-2375130
2-3/8
60.3
2.874
73.0
1.11
0.50
8.3
210.8
75
5.2
130
7219-2500025
2-1/2
63.5
3.012
76.5
1.17
0.53
8.7
221.0
75
5.2
25
7219-2500130
2-1/2
63.5
3.012
76.5
1.17
0.53
8.7
221.0
75
5.2
130
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
Part
Number
ID
(in)
ID
(mm)
Reinf
Plies
OD
(in)
OD
(mm)
Approx Approx
Wt
Wt
(lbs/ft) (kg/ft)
Min
Bend
Rad
(in)
Min
Bend
Rad
(mm)
Max
Rec
WP
(psi)
Max
Rec
WP
(bar)
Perm
Cplg
Rec
*
Std
Pack
Qty
(ft)
Stock
Status
**
7219-2563025
2-9/16
65.1
3.071
78.0
1.19
0.54
9.0
228.6
75
5.2
25
7219-2563130
2-9/16
65.1
3.071
78.0
7219-2750025
2-3/4
69.9
3.307
84.0
1.19
0.54
9.0
228.6
75
5.2
130
1.40
0.64
9.8
248.9
75
5.2
25
7219-2750130
2-3/4
69.9
3.307
84.0
1.40
0.64
9.8
248.9
75
5.2
130
7219-3000025
76.2
7219-3000130
76.2
3.543
90.0
1.51
0.68
10.6
269.2
75
5.2
25
3.543
90.0
1.51
0.68
10.6
269.2
75
5.2
130
7219-3125025
3-1/8
79.4
3.701
94.0
1.57
0.71
11.8
299.7
75
5.2
25
7219-3125130
3-1/8
7219-3375025
3-3/8
79.4
3.701
94.0
1.57
0.71
11.8
299.7
75
5.2
130
85.7
3.937
100.0
1.74
0.79
12.9
327.7
75
5.2
25
7219-3375130
7219-3500025
3-3/8
85.7
3.937
100.0
1.74
0.79
12.9
327.7
75
5.2
130
3-1/2
88.9
4.094
104.0
1.92
0.87
13.6
345.4
75
5.2
25
7219-3500130
3-1/2
88.9
4.094
104.0
1.92
0.87
13.6
345.4
75
5.2
130
7219-3563025
3-9/16
90.5
4.134
105.0
1.96
0.89
13.8
350.5
75
5.2
25
7219-3563130
3-9/16
90.5
4.134
105.0
1.96
0.89
13.8
350.5
75
5.2
130
7219-4000025
101.6
4.567
116.0
2.20
1.00
15.7
398.8
75
5.2
25
7219-4000130
101.6
4.567
116.0
2.20
1.00
15.7
398.8
75
5.2
130
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
235
Petroleum Transport
Petroleum Transport
NOTES:
236