Multi-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electrical Downtilt Enhanced Sidelobe Suppression
Multi-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electrical Downtilt Enhanced Sidelobe Suppression
Multi-Band Panel Dual Polarization Half-Power Beam Width Adjust. Electrical Downtilt Enhanced Sidelobe Suppression
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
Enhanced Sidelobe Suppression
1710 2690
1710 2690
65
65
0 12
0 12
18dB
18dB
80010622
Type No.
Frequency range
17102690
1920 2200 MHz
2200 2490 MHz
+45, 45
+45, 45
+45, 45
+45, 45
Horizontal Pattern:
Half-power beam width
Front-to-back ratio (180 30)
Cross polar ratio
Sector
65
65
61
61
Typically: 30 dB
> 10 dB
Typically: 30 dB
> 10 dB
Typically: 25 dB
> 8 dB
Typically: 25 dB
> 10 dB
6.5
5.9
5.7
0
60
Vertical Pattern:
Half-power beam width
7.1
Electrical tilt
Sidelobe suppression
for first sidelobe above main beam
0 ... 6 ... 12 T
18 ... 18 ... 18 dB
0 ... 6 ... 12 T
18 ... 18 ... 18 dB
0 ... 6 ... 12 T
18 ... 17 ... 17 dB
Impedance
50
VSWR
< 1.5
0 ... 6 ... 12 T
18 ... 18 ... 17 dB
> 30 dB
Intermodulation IM3
65
7.1
dB
dB
10
10
1710 2690
+45
1710 2690
45
1710 2690
+45
1710 2690
45
7-16
7-16
7-16
7-16
0
0
Horizontal Pattern
Vertical Pattern
0 12 electrical downtilt
65
Input
dB
dB
Wind load
0
0
Horizontal Pattern
Vertical Pattern
0 12 electrical downtilt
61
5.7
dB
dB
Bottom
2 x, Position bottom
continuously adjustable
Frontal:
Lateral:
Rearside:
200 km/h
Height/width/depth
1415 / 323 / 71 mm
Category of
mounting hardware
M (Medium)
Weight
Packing size
10
10
4 x 7-16 female
Connector position
Adjustment
mechanism
10
10
936.3621/b
Subject to alteration.
6.5
Scope of supply
18 kg / 20 kg (clamps incl.)
1706 x 337 x 112 mm
Panel and 2 units of clamps
for 50 115 mm diameter
0
0
Horizontal Pattern
Internet: www.kathrein.de
Vertical Pattern
0 12 electrical downtilt
80010622 Page 1 of 2
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Accessories
General Information
Type No.
Description
738546
1 clamp
Weight
approx.
1.0 kg
72
64
9
Remarks
20
Accessories
Units per antenna
2 (included in the scope
of supply)
731651
1 clamp
Mast: 28 60 mm diameter
0.8 kg
85010002
1 clamp
2.7 kg
85010003
1 clamp
737978
4.8 kg
2.8 kg
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Kathrein antennas have passed environmental tests as recommended
in ETS 300 019-2-4. The homogenous design of Kathreins antenna
families use identical modules and materials. Extensive tests have been
performed on typical samples and modules.
254
48
41
71
98
Environmental tests:
Adjustment
mechanism
with integrated
scale
30
Material:
1415
1480
1520
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
323
Bottom view
45 45
RCU
+45 +45
17102690 Left Right 17102690
RCU
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna
or even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010622
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
936.3621/b
Please note:
Subject to alteration.
Layout of interface