Ecology Unit
Ecology Unit
Ecology Unit
Pol/J/er
Fin
COMPANY PROFILE
Finpower Aircon is an ISO certified organization focused in the manufacture of complete range
of Air Conditioning, Refrigeration and KitchenVentilation equipment for the International markets.
Our specialty lies in the manufacture of highly complicated and challenging HVAC machines with
special emphasis on Packaged units, Chillers and
other airside products such as Fan Coil units, Fresh
Air Handling Units,Ecology units and energy recovery units. Our design and engineering team evaluates the diverse specifications of customer and
endeavours to provide precise machines at
economical prices within committed delivery periods.
Fin
Power
ECOLOGY UNIT
Ventilation is the critical factor to consider when investigating the feasibility of a new commercial kitchen site. New projects, new design to existing buildings, and non-traditional sites often
require uncommon solutions for kitchen ventilation problems. We cater to various challenges
that are encountered through a highly flexible tailor made ecology unit.
Construction
Our ecology unit are made of:
25 mm double skin insulated panels as standard.
Ceiling suspended or floor mounted.
The structure consist of anodized aluminum profile.
50mm double skin insulated panels for quiet performance as optional are Eurovent certified.
Benefits
EU ROVE
NT
CERTIFIED
PERFORMANCE
-=.euroven1>-eerc,r,ce1:1on.corn
Compact design.
Ease of maintenance.
Silent operation.
Eliminates volatile organic compounds (VOC).
Minimizes filter replacement service costs.
lor 2 stage odor absorbent media.
Can sustain upto high temperature which make it suitable for kitchen ventilation
Power
Features
Standard
At least 95% of all grease, odor and smoke particles are removed
Backward curve type non overloading centrifugal AMCAcertified fans
UL certified filters as per EN 1822 standard
Motors Class F insulation, TEFC,high efficiency insulation type meeting voltages for 50
and 60 Hz applications
Specially formulated kitchen odor absorbent media
Activated carbon refillable filter cassette for easy refills
Suitable for kitchen, laboratory and food/chemical industries exhaust
Can be located in the ceiling space, on the roof, or in a designated mechanical room
Typical installation as shown in Fig A.
Option
Electrostatic precipitator/filters (ESPs)
UL /CE certified UV lamps
UL rated Fire dampers
Special kitchen application fans with TEFC motors located "outside airstream".
Fin
MAJOR COMPONENTS
Filters
Metallic filter:
Metallic filters are high velocity washable type permanent air filters.
The media used is pleated layers of 14 screen aluminum I SS mesh
arranged in multi layers and encased in aluminum or galvanized steel
frame. The filters are low initial resistance, high dust-holding capacity
and a low rate of increase in static pressure to provide peak filtration
performance. Filters are built to last with multiple layers of specially
arranged crimped electro-galvanized expanded metal and assembled in durable 18-gauge galvanized steel frames. Metallic filters are
used for removing oil and grease from the exhaust air. The filters are
UL listed and efficiency grade is G2 I G4.
Bag filter:
Pre filter:
f-
UL listed pre filters are air cleanable panel filters made up of non-woven,high lofted synthetic (polyester) filter media and are available in
various efficiency grades ranging from G2 to G4. Pre filters offer very
high dust resistance and dust holding capacity than the other types of
similar grade panel filters.
@
HEPAfilter:
High efficiency particulate air (HEPA) filters are designed to
screen particles larger than 0.3 m with an efficiency of 99.99%.
HEPAfilters are composed of a mat of randomly arranged fibres.
The fibres are typically composed of fiberglass and possess diameters between 0.5 and 2.0 micrometers. Key factors affecting its
functions are fibre diameter, filter thickness, and face velocity.
Standard HEPA, High Capacity HEPA, Panel Filters, and High
temperature filters are several styles available. Filters are UL
listed and efficiency grades ranging from HlO to Hl3.
Pa1111er
MAJOR COMPONENTS
Carbon filter:
Carbon filters use the bed of activated carbon to filter off gas contaminants and impurities using chemical adsorption. Activate carbon has
the affinity for the gaseous contaminants which it adsorbs and keep it
in porous surface structure of the media. The activated carbon media
is impregnated in potassium permanganate solution or phosphoric
acid or suitable solution to remove various gaseous contamination in
the air. Carbon filters in the form of granular activated carbon (GAC)
has the most flexible properties.
Sulfurdioxide
Hydrogen sulphide
Nitricoxide
Formaldehyde
Lower molecular weight aldehydes and organic acids
Fin
Po1111er
MAJOR COMPONENTS
Electrostatic Precipitator
An electrostatic precipitator (ESP) is a filtration device that
removes fine particles like dust and smoke, from a flowing gas
using the force of an induced electrostatic charge minimally
impeding the flow of gases through the unit.
The electrostatic precipitator is highly automatized with unique
and workable solutions such as its mechanical structure, HV
power pack controlling, systematic safety provisions, and
malfunction self-diagnosis function.
9
Electric: Field
Insulator
Cathode Needle Freme
Anode Tube
Cathode needles empowered by a high
voltage would generate corona discharging
electrons with a density as high as more
than 100 millions per cubic centimeter.
Function
Control the procedure of the auto-cleani nq process
Display the status of the water-heating cleaning tank
Adjust the temperature and start/stop the auto-cleaning
function
For the storage of water fed by the water source
Drain out water in the tank
Feed the tank with water coming from the source<1 \2 ")
3
4
5
Storage Tank
Drainaqe Outlet
Water Inlet
7
8
Power
MAJOR COMPONENTS
Electrostatic Precipitator - Features
Fume & mist elimination efficiency>90%. Most of the smell is eliminated, no complaints will
be incurred. Tailor-made for food service establishments specialized in heavily-oiled and
strongly-flavored cuisines.
High-end high-frequency high-voltage solid-state transformer with epoxy resin encapsulation, driven by half-bridge switching converter, and is powerful, stable and energy-saving.
Patented cylindrical honeycomb structure filter cell, ensuring extremely high efficiency of
fume &mist elimination.
Multiple protection functions such as electrostatic discharge protection, power over-heated
protection, making it safe and reliable of our facility.
Safe, Reliable and Eco-friendly.
Electric field cells with modular design and slide-in tracks to facilitate easy removal of cells
for cleaning and servicing.
Compact Size, flexible structure, adaptive to various installation environments.
--CJB-
~~~ ~ ~
Tiny size of the electrons (which is several orders of magnitude smaller than that of the fume & mist particulates) and the
high density of electrons discharged (~1Xl08/cm3), ionization of fume & mist particulates entrained in the gas would be
practically inescapable.
Negatively charged particulates are bound to be attracted to
the positively charged anode section and get captured, thus
achieving an extremely high air cleaning efficiency.
Fin
Po1111er
MAJOR COMPONENTS
UV Emitter
UV odour control is today's most advanced and environmental
friendly solution to odour pollution. From nausea to headaches,
to sheer frustration, offensive kitchen emissions can dramatically
reduce the quality of life for the individuals exposed, which is
why this process is so vital when it comes to extracting fumes
from a kitchen. The system manipulates the reaction between the
Ultra Violet light and ozone to break down the Volatile Organic
Compounds (VOCs) at the source of the odour into smaller,
odourless compounds. Patented technology ensures that our
system can provide you with unrivalled efficiency, low
day-to-day running costs and minimal maintenance routines.
Fire Dampers
Fire dampers are passive fire protection products used in heating,
ventilation, and air conditioning (HVAC)ducts to prevent the spread of
fire inside the ductwork through fire-resistance rated walls and floors.
These UL certified fire/smoke dampers are similar to fire dampers in
fire resistance rating, and also prevent the spread of smoke inside the
ducts. When a rise in temperature occurs, the fire damper closes,
usually activated by a thermal element which melts at temperatures
higher than ambient but low enough to indicate the presence of a fire,
allowing springs to close the damper blades.
~CE
Motor
Standard foot mounted, TEFC,3 phase induction motors are provided
with standard efficiency EFF-2, High energy efficiency EFF-1& premium efficiency.
All the motors are IP 54, Class F insulation with temperature rise to
class B.
Motors for special application can be provided like flame proof or
explosion proof. Permanent magnet motors can also be provided.
All motors are as per IEC & NEMA-MG-1standards and CE, UL and
CSA certified
Power
MAJOR COMPONENTS
Fans
~~
DIDWfans
SISWfans
These centrifugal fans with backward blade were developed
with advanced technologies.Some of the features and characteristics of these fans are: backward wheel blades, a wide range of
applications, high efficiency, low noise, and low power consumption. These fans are ideal for use in central air-conditioning
systems, in purifiers. They are also suitable for use in a variety of
other ventilation. SISW blowers are used in case of motor
outside airstream.
: 15 mm to 160 mm WG
: 400 rpm to 3000 rpm
-Static Pressure
~
rpm range
-----...--
: Less than 80 DB
Fin
Power
ACCESSORIES
Panels
VFD Panels:
The VFD Panels (Variable Frequency Drive) are designed to
control the speed of electric motor. We can cut down energy
costs by controlling the motor with a variable frequency drive,
which is one of the benefits of Variable Frequency Drives. They
are widely used in ecology units to ensure that the unit is running
at all variations of pressures. The panel includes details of fan
status, fan run-stop status and filter conditional status.
DP Switch:
A Differential Pressure(DP) Switch, just like a regular pressure
switch, is a simple electro-mechanical device that operates on
the basic principles of levers and opposite forces. Mainly, they
are used for sensing a difference between two points in a
process. Three key elements are used in various combinations to
manufacture different kinds of differential and standard pressure
switches to suit unique industrial needs.
Power
ACCESSORIES
Magnehelic gage:
Bezel provides flange for flush mounting in panel.
Clear plastic face is highly resistant to breakage. Provides undistorted
viewing of pointer and scale .
Precision lithe-printed scale is accurate and easy to read .
Red tipped pointer of heat treated aluminum tubing is easy to see. It is
rigidly mounted on the helix shaft.
Pointer stops of molded rubber prevent pointer over-travel without
damage.
"Wishbone" assembly provides mounting for helix, helix bearings
and pointer shaft.
Jeweled bearings are shock-resistant mounted; provide virtually
friction-free motion for helix. Motion damped with high viscosity
silicone fluid.
Controller:
Tested, predefined applications
Flexible configuration
Suited for the controlled variables temperature, relative I absolute
humidity, pressure I differential pressure, air flow rate, indoor air
quality, etc.
Autonomous sequence controllers with P, PI or PID mode
Integrated operation
No commissioning tool required (optional)
~I
U '
I 'l!:!I'
!-!II
I!
1i
Pressure Transducer:
A pressure transducer, often called a pressure transmitter, is a transducer
that converts pressure into an analog electrical signal. Although there are
various types of pressure transducers, one of the most common is the
strain-gage base transducer. The conversion of pressure into an electrical
signal is achieved by the physical deformation of strain gages which are
bonded into the diaphragm of the pressure transducer and wired into a
wheatstone bridge configuration. Pressure applied to the pressure transducer produces a deflection of the diaphragm which introduces strain to
the gages. The strain will produce an electrical resistance change proportional to the pressure.
Fin
Po1111er
Po1111er
Fin
DIMENSION.AL DETAILS
"
"
"
"
/
:;:::;
(.)
Q)
Cf)
Q.
E
co
.....J
DIMENSION.AL DETI.ALS
3400
6800
10200
13600
17000
20400
23800
27200
30600
34000
37400
40800
44200
17600
51000
54400
....
8~ 8,)-
CMH
SK-25-FM-EC0-34
SK-25-FM-EC0-68
SK-25-FM-ECC-102
SK-25-FM-EC0-136
SK-25-FM-EC0-170
SK-25-FM-EC0-204
SK-25-FM-EC0-238
SK-25-FM-EC0-272
SK-25-FM-EC0-306
SK-25-FM-EC0-340
SK-25-FM-EC0-3 7 4
SK-25-FM-EC0-408
SK-25-FM-EC0-442
SK-25-FM-EC0-476
SK-25-FM-EC0-510
SK-25-FM-EC0-544
>
::J
7\
Electrostatic
Precipitator
I\
mm
1050
1400
1650
1955
2000
2250
2250
2475
2675
2875
2875
2875
2875
2875
3175
3174
mm
770
1050
1050
1250
1360
1360
1650
1650
1650
1650
1955
1955
2240
2240
2240
2240
mm
mm
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
mm
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
mm
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
mm
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
mm
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
mm
980
1130
1280
1280
1380
1380
1430
1580
1580
1580
1730
1730
1730
1880
1880
2050
Width
Height
Depth
735
735
735
735
735
735
735
735
735
735
735
1470
735
1470
1470
1470
909
1432
1432
1553
2015
1553
1432
1553
2015
2198
2015
1553
2197
2198
2015
2198
942
886
1631
1744
1631
943
1631
1744
1631
1744
2376
1744
2545
1744
2376
2546
Fin
Po1111er
Po1111er
Fin
DIMENSIONAL DETIALS
"
"
"
"
/
:;:::;
(.)
Q)
Cf)
Q.
E
co
.....J
DIMENSIONAL DETAILS
3400
6800
10200
13600
17000
20400
23800
27200
30600
34000
37400
40800
44200
17600
51000
54400
....
8~ 8,)-
CMH
SK-25-FM-EC0-34
SK-25-FM-EC0-68
SK-25-FM-ECC-102
SK-25-FM-EC0-136
SK-25-FM-EC0-170
SK-25-FM-EC0-204
SK-25-FM-EC0-238
SK-25-FM-EC0-272
SK-25-FM-EC0-306
SK-25-FM-EC0-340
SK-25-FM-EC0-3 7 4
SK-25-FM-EC0-408
SK-25-FM-EC0-442
SK-25-FM-EC0-476
SK-25-FM-EC0-510
SK-25-FM-EC0-544
>
::J
7\
Electrostatic
Precipitator
I\
mm
1050
1400
1650
1955
2000
2250
2250
2475
2675
2875
2875
2875
2875
2875
3175
3174
mm
770
1050
1050
1250
1360
1360
1650
1650
1650
1650
1955
1955
2240
2240
2240
2240
mm
mm
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
mm
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
mm
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
mm
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
mm
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
mm
980
1130
1280
1280
1380
1380
1430
1580
1580
1580
1730
1730
1730
1880
1880
2050
Width
Height
Depth
735
735
735
735
735
735
735
735
735
735
735
1470
735
1470
1470
1470
909
1432
1432
1553
2015
1553
1432
1553
2015
2198
2015
1553
2197
2198
2015
2198
942
886
1631
1744
1631
943
1631
1744
1631
1744
2376
1744
2545
1744
2376
2546
About Us
Finpower Group, established in 2012 at Dubai Industrial City, is engaged in
manufacturing of Air-Conditioning equipment. The company is formed by
Mechanical/Electrical engineers with more than 20 years of design and
application knowledge to serve the demands of the ever growing and
challenging market.
The following are the range of products, which are being manufactured under
Finpower umbrella.
Package Units
VRF Units
Fan Coil Units
Duct Split Units
Air Cooled Condensing Unit
Cooling/Heating Coils (Water/DX)
We would much appreciate, getting your valuable support and are eager to
prove our capabilities in giving quality products at competitive prices.
Fin
Pol!l'er