College Name:

Department:

HUMANITIES AND SCIENCES

Subject:

NETWORK ANALYSIS

Name of the Faculty: D. RAMESH

Unit No:
Minimum Questions

Passage Question Count Question Id DifficultyLevel

QuestionType
1
1
SingleCorrectAnswer
2
2
SingleCorrectAnswer
3
3
SingleCorrectAnswer
4
4
SingleCorrectAnswer
5
5
SingleCorrectAnswer
6
6
SingleCorrectAnswer
7
7
SingleCorrectAnswer
8
8
SingleCorrectAnswer
9
9
SingleCorrectAnswer
10
10
SingleCorrectAnswer
11
11
SingleCorrectAnswer
12
12
SingleCorrectAnswer
13
13
SingleCorrectAnswer
14
14
SingleCorrectAnswer
15
15
SingleCorrectAnswer
16
16
SingleCorrectAnswer
17
17
SingleCorrectAnswer
18
18
SingleCorrectAnswer
19
19
SingleCorrectAnswer
20
20
SingleCorrectAnswer
21
21
SingleCorrectAnswer
22
22
SingleCorrectAnswer
23
23
SingleCorrectAnswer
24
24
SingleCorrectAnswer
25
25
SingleCorrectAnswer

50
Randomize Options

26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer

aculty: D. RAMESH
Year/Sem:

Question
A storage cell is a device that can operate
An electrochemical cell or several electrochemical cells connected in series, that can be used as a source or direct electric current at a constant voltage is called
The cathode of Ni-Cd battery is composed of
A fuel cell converts
When hydrogen is used as fuel in hydrogen-oxygen fuel cell, the electrode is made of
When storage cell is operating as voltaic cell it is said to be
In lead-acid storage cell during discharging operation the concentration of H2SO4
Electrolyte can conduct electricity because
HCl is called an electrolyte because
Which of the following is a weak electrolyte?
Ionization of an electrolyte in aqueous solution is due to
An ionizing solvent has
Which of the following does not conduct electricity?
The specific conductance of solution increases with
The ionization of a strong electrolyte increases when the solution is diluted and the relation is given by
Acetic acid is a weak electrolyte because
The degree of dissociation of acetic acid in an aqueous solution of the acid is practically unaffected
Solid NaCl is a bad conductor of electricity because
Pure water does not conduct electricity because, it is
The molar conductivity of a solution of any electrolyte is the product obtained by multiplying
A galvanic cell converts
The potential of standard hydrogen electrode dipped in a solution of 1M concentration and hydrogen gas is passed at 1 atm pressure
The potentials of two metals electrodes used in a cell are 0.35V and 0.8 V. the emf of the cell formed by combining them is
In electrochemical series the elements are arranged in the
Calomel electrode is reversible with respect to

The electrode potential is the tendency of a metal

In lead-acid storage cell during discharging operation the concentration of H2SO4
The specific conductance of solution increases with
A fuel cell converts
In the electrochemical corrosion
The deciding factor in atmospheric corrosion is
During corrosion of iron in aqueous solution
The metal at the top of the electrochemical series is
The following metal is used for the cladding of aluminum
Anodic coating protects underlined metal
Electroplating is process of depositing a thin layer of
The following reagents are used for solvent cleaning of metal surface
Acid pickling of steel is carried out by dipping in
Sand blasting is used for removing the following from the metal surfaces
The process of covering steel with tin to prevent it from corrosion is called
The function of ammonium chloride used as flux in galvanization is to
Anodic coating protects the underlined metal
The rate of corrosion of iron in atmosphere depends on
During wet corrosion
The buried pipeline is protected from corrosion by connecting to Mg block it is called
For the corrosion of iron one of the following factors is essential
Corrosion is an example of
Corrosion is an example of
The rusting of iron is catalyzed by one of the following
Cathodic coatings if punctured

MLR INSTITUTE OF TECHNOLOGY

Answer OptionA
A
Both as voltage cell & electrolytic cell
A
Battery
C
Cadmium
A
Chemical energy of fuels directly to electricity
A
An alloy of palladium and silver
B
Charging
B
Increases
C
Their molecules contains unpaired electrons which are mobile
D
Its molecules are made of electrically charged particles
NH4OH
A
D
D
C
A
C
B
C
B
B
B
B
C
B
B
B

Hydrolysis of electrolyte
Low value of dielectric constant
Molten NaCl
Increase in concentration
Nernst equation
Its molecular weight is high
By adding a pinch of NaCl
It contains only molecules
Acidic
Specific conductivity with molecular weight
Electrical energy into chemical energy
1 volt
1.2 V
Decreasing order of standard reduction potentials
Mercury ion

C
B
A
A
A
A
C
D
A
B
B
A
B
A
B
A
B
D
A
C
B
A
A
D
C

To gain electrons
Increases
Increase in concentration
Chemical energy of fuels directly to electricity
Anode undergoes oxidation
Presence of oxygen in air
Corrosion occurs at cathode
Most stable
99.5% pure Al
due to noble character
Superior metal over inferior base metal.
Naphtha
Dil HCl

Oxide scale
Galvanizing
Prevent oxide formation.
Due to its nobel character
Humidity of atmosphere
The anodic part undergoes oxidation
Impressed voltage protection
Presence of moisture
Oxidation
Oxidation
Fe
Have affected on the base metal

CHNOLOGY

OptionB
as voltaic cell
voltaic cell
nickel
chemical energy of fuels directly to heat
aluminum
discharging
decreases
Their molecules contain loosely held electrons which become free under the influence of Voltage.
its breaks up into ions when current is passed through it
NaOH
Increase in electrostatic forces of attraction between the ions
a dielectric constant equal to one
solution of NaCl in H2O
decrease in concentration
Ostwalds law
it is weakly ionized
by adding a drop of concentrated HCl
the ions present in its are not free to move
low boiling
Specific conductivity with the volume of the solution containing 1 gm mole of the electrolyte.
chemical energy into electrical energy
10 volt
1.15 V
Increasing order of standard reduction potentials
chloride ion

to lose electrons
decreases
decrease in concentration
chemical energy of fuels directly to heat
Cathode undergoes oxidation
Presence of gases like SO2
Corrosion product is deposited at anode
Most noble
100% pure Al
Higher oxidation potential
Inferior metal over superior base metal
acid
warm Dil HCl.
oils
tinning
Prevent deposition of impurities
sacrificially
degree of pollution in atmosphere
The cathodic part undergoes oxidation
Sacrificial cathodic protection
Presence of both moisture and oxygen
Reduction
Reduction
O2
Causes less corrosion of the base metal

OptionC
as electrical cell
electrolytic cell
paste of NiO (OH)
Chemical energy of fuels directly to pressure
iron
neutral
increase then decrease
Their molecules are broken up into ions, when the electrolyte is fused or dissolved in a solvent.
it ionizes when electric current is passed through it
HCl
Instability of the compound in aqueous medium
A high melting point
NaCl crystals
decrease in temperature
Arrhenius equation
It is a covalent compound
By diluting with water
It does not possess ion
almost not ionize
Reciprocal of conductivity with volume
Electrical energy into heat energy
0 volt
-0.5 V
Increasing order of equivalent weights
both ions

either to lose or gain electrons

increase-decrease
decrease in temperature
Chemical energy of fuels directly to pressure
Anode undergoes reduction
Humidity of air
Corrosion occurs at anode
Least active
98.5 % pure Al
due to its lower oxidation potential
Superior metal over superior base metal
alkali
Warm Dil H2SO4
greases
metal cladding
Reduce the content of base metal and coating metal.
Due to its higher electrode potential
frequency of rain fall
The anodic part undergoes reduction
Sacrificial anodic protection
Presence3 of hydrogen
Electrolysis
Electrolysis
Zn
Causes accelerated corrosion of the base metal

OptionD
none
metal conductor
paste of Cd (OH) 2
none
cadmium
none
none
Their molecules break up into ions when voltage is applied
it ionizes when dissolved in a proper solvent.
NaCl
Decrease in the electrostatic forces of attraction between the oppositely charged ions.
a high value of dielectric constant
none.
none.
law of mass action
it is highly unstable
by raising the temperature.
it does not contain free molecules.
decomposed easily
Specific conductivity with equivalent weight.
chemical energy into heat energy.
100 volt
0.5 V
Increasing order of oxidation potentials.
none.

none.
none
none.
none
Both cathode and anode under goes oxidation
Frequency of rainfall
Corrosion occurs at cathode with deposition of rust at cathode.
More active
99% pure Al
due to its higher reduction potential
Inferior metal over inferior base metal
sodium carbonate.
dil H2SO4
old paints
electro plating
None.
none.
all the above.
Neither cathodic nor anodic part undergoes any change.
Any of these
Presence of strong acid
Erosion
Erosion
H+
Cathodic coating corrodes first followed by the corrosion of base metal.

College Name:
Department:
Subject:
Unit No:

H&S
ENGINEERING CHEMISTRY
2

Minimum Questions
Passage

Question Count

Question Id

DifficultyLevel

50
QuestionType

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer

23

23

SingleCorrectAnswer

24

24

SingleCorrectAnswer

25

25

SingleCorrectAnswer

26
27
28
29
30
31
32
33
34
35
36
37

26
27
28
29
30
31
32
33
34
35
36
37

4
4
4
4
4
4
4
4
4
4
4
4

SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer

38

38

SingleCorrectAnswer

39

39

SingleCorrectAnswer

40
41
42
43

40
41
42
43

4
4
4
4

SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer

44

44

SingleCorrectAnswer

45
46
47

45
46
47

4
4
4

SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer

48
49
50

48
49
50

4
4
4

SingleCorrectAnswer
SingleCorrectAnswer
SingleCorrectAnswer

Name of the Faculty: RAJITHA

Randomize Options

he Faculty: RAJITHA
Year/Sem:

Question

The purification of brackish water by reverse osmosis is also called as

One part of CaCO3 equivalent hardness per 105 parts of water is also called as
Caustic embrittlement can be avoided by using
The soft loose and slimy precipitate formed within the boiler is called
In low pressure boilers carbonate conditioning of boiler feed water is carries out to remove
The composition of Alum is
Temporary hardness in water is removed by
Blow-down operation causes the removal of
Solubility of calcium sulphate in water
Permanent hardness of water cant be removed by Treatment with
Hard water is unfit for use in boilers for generating steam because
Hard water can be softened by passing it through
Calgon is a trade name given to
Brackish water mostly contains dissolved
The method by which the ions are pulled out of salt water by direct current, and employed thin, rigid membrane is
Tannins and agar-agar are used for
The external treatment of boiler water feed done by
Castor oil is a
Liquid chlorine is most effective
Disinfection by ozone is due to liberation of
The formula of chloramine is
Phosphate conditioning of boiler feed is carried out by
Hardness of water is caused by
Hard water contains
The chemical formula of zeolite is
Temporary hardness can be removed by
The demineralization of water is called
Which is not the unit of hardness of water?
Permanent hardness of water is due to
The relation between mg/L and ppm is
Tannin, lignin is used for
Blow down operation causes the removal of
Temporary hardness of water can be removed by
.Purest form of natural water is
Calgon is a trade name given to
The phenomenon of carrying of water along with impurities by steam is
Brackish water mostly contains dissolved
Water can be sterilized by using

PH of alkaline water is

Brackish water can be purified by using

Water containing calcium chloride and magnesium sulphate causes
Best method of removing hardness of water is
Hardness of water is expressed in terms of equivalents of
Caustic embrittlement is caused due to the presence of
The exhausted cation exchange resin can be regenerated by treating with
A hard sticky precipitate formed on the inner surface of the boiler is called
Which of the following is responsible for temporary hardness?
The water which is fit for drinking is called
Which indicator is used for the determination of hardness by EDTA method?
Water shows hardness, when it contains

MLRIT

Answer OptionA

A
C
D
B
B
A
C
B
B
C
D
C
B
D
A
C
A
B
A
B
A

Electro-dialysis.
Degree Clarke
Sodium phosphate
Scale
Calcium bicarbonate
K2SO4.Al2 (SO4)3.24H2O (
Filtration
Scales
Increases with rise of temperature.
Lime soda
Its boiling point is higher
Lime stone .
Sodium silicate.
Calcium salts
Electro dialysis
Phosphate conditioning.
Lime-soda process
Anti-skinning agent
Disinfectant
Oxygen
ClNH2

Na3PO4

CaCl2

D
D
C
B
B
c
A
C
A
C
C
A
b

Na

FeSO4.7H2O

Zeolite process
Zeolite process
ppm
HCO31 mg/L = 1 ppm
Phosphate conditioning
sludges
Filtration
Sea water
Sodium hexametaphosphate
Priming

KCl

Cl2

B
D
B
A

limesoda process
Temporary hardness
Ion exchange

MgCO3

B
B
D
D
C
C
D

NaCl

dil. NaOH
Sludge
MgCl2

Hard water
Methyl orange
Alkalinity

IT

OptionB

Reverse osmosis.
ppm.
hydrogen
sludge
calcium sulphate
K2 (SO4)3.Al2 (SO4)3.24H2O
sedimentation
Sludges
Decreases with rise of temperature
By permutite process
steam is generated at high temperature.
Sodium hexa Meta phosphate
Sodium hexa Meta phosphate.
Magnesium salts
Reverse osmosis
Carbonate conditioning
sodium sulphate treatment
antifoaming agent
coagulant
nascent oxygen
NHCl2
Ca (PO4)2
NaCl
Mg2+
Al2 (SO4)3.18H2O
ion exchange
ion-exchange process
epm
CO310 mg/L = 1 ppm
carbonate conditioning
scales
screening
river water
magnesium phosphate
carry over
MgCl2
CCl4

more than 7
permutit process
permanent hardness
permutit
CaCO3
NaOH
dil. HCl
embrittlement
NaHCO3
brakish water
methyl red
acidity

OptionC

Zeolite
Degree French
ammonium hydroxide
Embrittlement
calcium chloride
K2SO4.Al2 (SO4)3.20H2O
Boiling
Acidity
Remains unaltered with rise of temp.
By boiling
Water decomposes into O2 and H2.
Ion-exchange resin.
Sodium meta phosphate.
Turbidity
Zeolite
colloidal conditioning
Calgon process t.
anti-ageing agent
flocculent
molecular oxygen
NCl3
Mg (PO3)2
Na2CO3
Ca2+
Na2Al2O4
boiling
limesoda process
degree Clark
Cl1 mg/L = 10 ppm
Colloidal conditioning
NaCl
boiling
rain water
calcium silicate
foaming
CaCl2
CaCO3

less than 7
Filtration
both
limesoda
Na2CO3
MgCO3
distilled water
coating
MgSO4
potable water
EBT
dissolved sodium salts

OptionD

Ion exchange.
Mg/L.
sedum sulphate
coagulation
calcium nitrate.
K2SO4.Al2SO4.24H2O
coagulation
Sodium chloride
Doesnt adopt any definite pattern with rise of temperature.
By ion-exchange process.
It produces scales inside the boiler.
Sodium silicate.
Calcium phosphate.
Sodium chloride.
Ion exchange.
calgon conditioning.
sodium aluminate treatment
sterilizing agent
none.
NH2Cl2
H3PO4
K2SO4
both (B) and
Na2O. Al2O3 . xSiO2 . yH2O
none
none
none of these
Na+
1 mg
calgon conditioning
acidity
sedimentation
lake water
sodium sulphate
embrittlement
NaCl
NaOH

0
reverse osmosis method
softness
boiling
K2CO3
KNO3
dil. NaCl
scale
Mg (HCO3)2
mineral water
FSB-F
dissolved Ca and Mg salts