Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 208 views

    45 GE Top Hat Section 141009

    Uploaded by

    mitualves
    Structural metal top hat sections are a cost-effective alternative to purlins or timber for supporting roofs on small buildings like garages and sheds. They are available in different thicknesses and lengths to suit various applications. Top hat sections have good spanning capabilities and can be fixed to supporting frames using metal screws through their bottom flanges.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    45 GE Top Hat Section 141009

    Uploaded by

    mitualves
    208 views2 pages
    Structural metal top hat sections are a cost-effective alternative to purlins or timber for supporting roofs on small buildings like garages and sheds. They are available in different thicknesses and lengths to suit various applications. Top hat sections have good spanning capabilities and can be fixed to supporting frames using metal screws through their bottom flanges.

    Original Description:

    Light steel truss frame material

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Structural metal top hat sections are a cost-effective alternative to purlins or timber for supporting roofs on small buildings like garages and sheds. They are available in different thicknesses and lengths to suit various applications. Top hat sections have good spanning capabilities and can be fixed to supporting frames using metal screws through their bottom flanges.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    208 views2 pages

    45 GE Top Hat Section 141009

    Uploaded by

    mitualves
    Structural metal top hat sections are a cost-effective alternative to purlins or timber for supporting roofs on small buildings like garages and sheds. They are available in different thicknesses and lengths to suit various applications. Top hat sections have good spanning capabilities and can be fixed to supporting frames using metal screws through their bottom flanges.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Steeline 61mm Top Hat Section

    Top Hat Section

    GE45

    GALVANISED
    Steeline Top Hat Section is made from galvanised Steel and can be manufactured
    to your individual requirements or is also available in stock lengths. It is available
    in the following gauges 0.75 BMT & 1.0 BMT to give you different spanning
    capabilities. This product is ideal to use for battens and wall girts on your garage,
    shed or carport.

    Ph. 1300 STEELINE

    www.steeline.com.au

    Service over and above

    Top Hat Section

    GE45

    Top hat sections


    Structural metal top hat sections are a cost effective alternative to conventional purlins or timber on smaller
    type buildings like garages and small sheds. They are ideal to be used for wall girts and roof supports.
    They are fixed with the use of 14 x 22 metal tek screws onto the columns and rafters through the bottom
    flange of the top hat sections. They have excellent spanning capabilities and are lap joined on longer runs.
    Steeline top hat sections are available in 3 different thicknesses allowing them to be used in many
    different applications to suit your requirements. They are rollformed cut to length in thicknesses of 0.75
    BMT, 1.0 BMT. Made from hi-tensile galvanised so you know they will stand the test of time. They comply
    with the Australian standards.

    Quick selection chart (Non-cyclonic areas)


    MAXIMUM ALLOWABLE PURLIN SPAN
    Single Span

    Profile
    BMT (mm)
    TH-61
    .75mm

    Purlin
    Spacings

    W33

    W41

    Double Span

    W50

    W33

    W41

    Lapped Span

    W50

    W33

    W41

    W50

    600

    3000

    2600

    2300

    4000

    3600

    3200

    4000

    3800

    3300

    900

    2600

    2300

    2100

    3800

    3200

    2800

    3900

    3300

    2900

    1200

    2400

    2100

    1900

    3450

    2900

    2550

    3600

    3000

    2650

    1500

    2200

    2000

    1700

    3200

    2700

    2400

    3300

    2800

    2450

    Profile
    BMT (mm)

    Purlin
    Spacings

    W33

    W41

    W50

    W33

    W41

    W50

    W33

    W41

    W50

    TH-61
    1.0mm

    600

    3400

    2900

    2500

    4000

    4000

    3500

    4000

    4000

    3600

    900

    3100

    2600

    2250

    4000

    3550

    3100

    4000

    3650

    3200

    1200

    2700

    2350

    2050

    3800

    3250

    2850

    3900

    3350

    2950

    1500

    2500

    2200

    1950

    3550

    3000

    2600

    3650

    3100

    2750

    Fastening steel cladding

    Typical attachment detail

    Steel cladding

    Support frame

    No 10x16 TEKS (Laps)

    No 14x22 TEKS

    Steeline has over 40 locations operating in every state and territory

    Ph. 1300 STEELINE

    www.steeline.com.au

    Service over and above

    You might also like