Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 126 views

    CW18 PDF

    Uploaded by

    jbsb2

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CW18 PDF

    Uploaded by

    jbsb2
    126 views2 pages

    Original Title

    CW18.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    126 views2 pages

    CW18 PDF

    Uploaded by

    jbsb2

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CW Series

    CW18
    Application Sheet
    13.00
    (330)

    10.630
    10.626
    (270)
    MAX. FRAME THICKNESS FOR
    FITTING CLEARANCE
    (USE SOCKET HEAD CAP SCREWS)

    14.80
    (376)

    11.020
    11.000
    (280)

    .875

    M22 x 1.5 THREAD x 3.17 (80,5)


    TYP. 10 EQ. SPACED
    ON A 13.187 (335) DIA. B.C.
    OUTPUT ROTATION IS OPPOSITE
    INPUT ROTATION

    FRAME MOUNT HOLES


    M16x2 THREAD
    (17) HOLES ON AN (18) HOLE
    EQ. SPACED PATTERN
    ON AN 11.811 (300) DIA. B.C.

    M12x1.5 BRAKE RELEASE PORT


    (1) AS SHOWN

    A1
    L1
    L2
    L3
    L4

    A2

    D2

    D1

    L5
    4.072 MAX.
    (103,43)

    "L Max"
    see motor shaft input chart
    MOTOR MOUNT HOLES
    M20X1.5 THREAD
    .885 (22,5) MIN. FULL THD.
    (2) HOLES @ 180
    LOC. AS SHOWN ON
    A 8.819 (224) DIA. B.C.

    L1 MIN. L2 MIN. L3 MIN. L4 MIN. L5 MIN. L6 NOM. A1 A2


    D1
    D2
    6.303 .002 4.495
    2.389 3.842 3.894
    1.00
    CW18A11 (160,09 ,05) (114,17) DA
    DA (60,68) (97,58) (98,91) (25,4) DA 45
    CW18A12 7.484
    (190,09
    7.484
    CW18A14 (190,09

    .002
    ,05)
    .002
    ,05)

    4.495
    (114,17)
    4.495
    (114,17)

    2.395
    (60,83)
    2.760
    (70,1)

    2.545
    (64,64)
    2.910
    (73,91)

    2.774
    (69,69)
    3.114
    (79,05)

    4.198
    (106,63)
    4.568
    (116,03)

    4.265
    (108,33)
    4.502
    (114,35)

    1.35
    (32,29) 20 45
    1.72
    (43,69) 20 45

    .236 MAX. R
    (6)

    .04 MAX. R
    (1)

    .75
    (19)

    1.02
    (26)
    3.77 .06
    (96 1,5)

    1.35
    (34,3)

    9.92 .08
    (252 2)

    14.90 NOM. (378,5) w/42cc MF


    16.70 NOM. (424,2) w/55cc MF
    17.37 NOM. (441,3) w/75cc MF
    17.49 NOM. (444,3) w/55cc MV
    19.19 NOM. (487,4) w/60cc MV
    20.26 NOM. (514,6) w/80cc MV
    NOTE: MM SHOWN IN ( )
    MOTOR CAVITY DIMENSIONS VARY WITH MODEL

    OTHER MODELS ALSO AVAILABLE

    Torque-Hub CW Series
    CW18
    Oil
    Fill to half full with EP-90 oil on most applications

    24000
    22000

    VolumeofOil:
    64 oz. (1,894 cm3) for CW18 units with brake included
    82 oz. (2,426 cm3)for CW18 units without brake

    Units with Brake: 5,000 RPM Maximum Intermittent


    (periods of 30 minutes or less)

    Life = 3,000 hours B-10


    Speed = 100 RPM output

    Units without Brake: 6,000 RPM Maximum Intermittent


    (periods of 30 minutes or less)

    To adjust for loads and speeds other than shown on curve:

    100 RPM

    )(

    Load (Curve)

    Adjusted Life (hrs) = 3,000 Speed (Adjusted) x Load (Adjusted)

    Weight
    Approximately 220 lbs (100 kg)

    10/3

    16000
    14000
    12000
    10000
    8000
    6000
    4000

    CW18 Model Formula

    Note: Specific models will change weights. Designed for use with cartridge style
    hydraulicmotors.

    2000

    100 RPM 3000 HOURS

    -5

    Conditions of Bearing Curve

    18000

    -4

    Speed Limitations

    Note: Oil volume will vary with specific model and application.

    -3

    For ultimate torque and horsepower capacities, contact a Torque-Hub representative.

    20000

    -2

    Contact Fairfield

    -1

    Peak

    160,000 lb-in
    18,000 Nm

    0 HUB MTG. FACE

    Intermittent

    80,000 lb-in
    9,000 Nm

    1 MAX BEARING LIFE LINE (0.67)

    Continuous

    Bearing Curve

    ALLOWABLE RADIAL LOAD (lbs.)

    Performance Data

    DISTANCE FROM HUB MOUNTING FACE (in.)

    CW

    18

    A1

    051

    CW Compact Wheel Drive


    Ratios
    026 25.86:1
    036 36.05:1
    Motor Shaft Input
    042 42.00:1
    4 14T, 12/24 (55cc) - L Max = 5.180 or 5.542
    051 50.69:1
    8 15T, 16/32 (46cc) - L Max = 5.042
    B W35x2x16x9g (80cc) - L Max = 5.955
    A W30x2x14x9g (60cc) - L Max = 5.042

    Frame Size
    Output Torque Capacity
    18 160,000 lb-in (18,000 Nm)
    Housing/Spindle Configuration
    (Contact Fairfield)

    Fairfield Manufacturing Company, Inc.


    First in Custom Gears and Drive Systems
    U.S. 52 South
    P.O. Box 7940
    Lafayette, IN 47903-7940 USA
    Telephone (765) 772-4000
    FAX (765) 772-4001
    www.fairfieldmfg.com

    Hydraulic Motor Cavity Configuration


    1 60cc (MV), 55cc (MF), 42cc (MF)
    2 55cc (MV), 75cc (MF)
    4 80cc (MV)
    Wheel Studs
    0 Not Included
    H M22 x 1.5

    Input Brake
    0 Not Included
    A 2,940 lb-in (332 Nm) STATIC
    92 psi (6.3 bar) INITIAL RELEASE
    123 psi (8.5 bar) FULL RELEASE
    B 4,410 lb-in (498 Nm) STATIC
    138 psi (9.5 bar) INITIAL RELEASE
    184 psi (12.7 bar) FULL RELEASE
    C 5,390 lb-in (609 Nm) STATIC
    168 psi (11.6 bar) INITIAL RELEASE
    225 psi (15.5 bar) FULL RELEASE
    G 3,430 lb-in (388 Nm) STATIC
    107 psi (7.4 bar) INITIAL RELEASE
    143 psi (9.9 bar) FULL RELEASE

    Torque-Hub is a registered trademark of Fairfield.


    2003 Fairfield Manufacturing Company, Inc.

    Note: 3,000 PSI (207 Bar) maximum


    pressure for all brakes listed.

    135

    You might also like