Engineered

with
TIA Portal

Distributed I/O for control cabinets

SIMATIC ET 200SP
Simple to use, smaller in size, stronger in performance

Intuitive, efficient, proven

TIA Portal redefines engineering

siemens.com/et200sp

SIMATIC ET 200SP
Simple
Quick station setup
With the simple station setup, the distributed peripherals make the most of the available
space. The maximum configuration comprises 64 modules, i.e. 64 x 16 signals all in a
width of only one meter. Both the modules and the plug boxes can be exchanged during
operation. The mechanical coding of I/O modules with the base unit prevents module confusion during assembly. This ensures the prevention of faults.
The new design and push-in clamps make wiring and disconnection of cables easier than
ever. You dont need any tools for wiring and just a screwdriver for disconnecting the
cables. The connections are gas-tight and thus corrosion-resistant.
Reliable diagnostics
SIMATIC ET 200SP continuously provides users with detailed information about the system
status via channel-specific signal transfer on the I/O module. No additional engineering is
necessary for this. Further diagnostic information can be read out with the SIMATIC STEP
7 V5.5 or SIMATIC STEP 7 V11 (TIA Portal) engineering system. Signals can be checked
directly at the clamps using a measuring probe.

Smaller
Effective footprint
SIMATIC ET 200SP is approximately 50% smaller compared to other distributed I/Os.
With a height of approx. 115 millimeters, the system offers space for 16 channels with
single-conductor connection (without AUX terminals). With 3-conductor connection with
AUX terminals, the height amounts to 140 millimeters for 8 channels. The depth is
approx. 75 millimeters. Leaving sufficient distance to the control cabinet door, SIMATIC
ET 200SP complies with the standardized bending radii in control cabinets with a depth
of 80 millimeters.
Maximum transparency
Despite the systems compactness, the I/O modules allow for very transparent labeling. An
innovative labeling system combines the most important information regarding module,
wiring, and channels.

Stronger
Maximum flexibility
The SIMATIC ET 200SP provides maximum flexibility for setup:
Configuration management with option handling for complete modules and
configuration management while running for properties of the individual modules
Easy expandability thanks to design with gaps
Quick replacement of modules with multiple hot-swapping

I/O modules
Digital input and output modules
6ES7131-6BF00-0BA0

DI 8x24VDC ST

6ES7131-6BH00-0BA0

DI 16x24VDC ST

6ES7131-6BF00-0CA0

DI 8x24VDC HF

6ES7131-6FD00-0BB1

DI 4x120VAC...230VAC ST

6ES7131-6BF60-0AA0

DI SRC 8x24VDC BA

6ES7131-6TF00-0CA0

DI 8xNAMUR HF

6ES7132-6BD20-0BA0

DQ 4x24VDC/2A ST

6ES7132-6BF00-0BA0

DQ 8x24VDC/0.5A ST

6ES7132-6BH00-0BA0

DQ 16x24VDC/0.5A ST

6ES7132-6BF00-0CA0

DQ 8x24VDC/0.5A HF

6ES7132-6BF60-0AA0

DQ Sink 8x24VDC/0.5A BA

6ES7132-6FD00-0BB1

DQ 4x24VAC...230VAC/2A ST

6ES7132-6BD20-0CA0

DQ 4x24VDC/2A HF

6ES7132-6HD00-0BB0

RQ 4x120VDC-230VAC/5A NO ST

6ES7132-6GD50-0BA0

RQ 4x24VDC/2A CO ST

Analog input and output modules

6ES7134-6GD00-0BA1

AI 4xI 2-/4-wire ST

6ES7134-6HD00-0BA1

AI 4xU/I 2-wire ST

6ES7134-6JD00-0CA1

AI 4xRTD/TC 2-/3-/4-wire HF

6ES7134-6JF00-0CA1

AI 8xRTD/TC 2-wire HF

6ES7134-6HB00-0CA1

AI 2xU/I 2-/4-wire HF

6ES7134-6HB00-0DA1

AI 2xU/I 2-/4-wire HS

6ES7135-6HD00-0BA1

AQ 4xU/I ST

6ES7135-6HB00-0CA1

AQ 2xU/I HF

6ES7135-6HB00-0DA1

AQ 2xU/I HS

Fail-safe modules
6ES7136-6BA00-0CA0

F-DI 8x24VDC HF

6ES7136-6DB00-0CA0

F-DQ 4x24VDC/2A HF

6ES7136-6PA00-0BC0

F-PM-E PPM

6ES7136-6RA00-0BF0

F-RQ 1x48VDC/230VAC/6A ST

3RK7136-6SC00-0BC1

F-CM AS-i Safety ST

Communication modules
6ES7137-6BD00-0BA0

CM 4xIO-Link ST

6ES7137-6AA00-0BA0

CM 1xPtP ST (ASCII, 3964R, USS, Modbus)

3RK7137-6SA00-0BC1

CM AS-i master ST

6ES7545-5DA00-0AB0

CM DP Master (for controllers)

Technology and special modules

6ES7138-6AA00-0BA0

TM Count 1x24V

6ES7138-6BA00-0BA0

TM PosInput 1 (SSI, 5V-Count)

7MH4138-6AA00-0BA0

TM 1xSIWAREX WP321 ST (analog)

6ES7 552-1AA00-0AB0

TM Timer DIDQ 16x24 V

6ES7134-6PA00-0BD0

AI energy meter ST *

Connection module

6ES7193-6BN00-0NE0

BU-Send

6ES7193-6AS00-0AA0

BA-Send 1xFC

Bus adapters
6ES7193-6AR00-0AA0

BA 2xRJ45

6ES7193-6AF00-0AA0

BA 2xFC

6ES7193-6AP00-0AA0

BA 2xSCRJ (only from function class HF)

Base units
Base unit type A0
6ES7193-6BP00-0BA0

16 push-in, 2 infeed bridged, DI dig./analog, max. 24 V DC/10 A

6ES7193-6BP20-0BA0

16 push-in, 10 AUX, 2 infeed bridged, DI dig./analog, max. 24 V DC/10 A

6ES7193-6BP00-0DA0

16 push-in, 2 infeed separated, DI dig./analog, max. 24 V DC/10 A

6ES7193-6BP20-0DA0

16 push-in, 10 AUX, 2 infeed separated, DI dig./analog,

max. 24 V DC/10 A

Base unit type A1 (with temperature measuring)

6ES7193-6BP00-0BA1

16 push-in, 2 infeed bridged, temperature, max. 24 V DC/10 A

6ES7193-6BP40-0BA1

16 push-in, 12 infeed bridged, temperature, max. 24 V DC/10 A

6ES7193-6BP00-0DA1

16 push-in, 2 infeed separated, temperature, max. 24 V DC/10 A

6ES7193-6BP40-0DA1

16 push-in, 12 infeed separated, temperature, max. 24 V DC/10 A

Interface modules and CPU

6ES7155-6AA00-0BN0

IM155-6PN ST with server module and BA 2xRJ45

6ES7155-6AU00-0BN0

IM155-6PN ST with server module, without bus adapter

6ES7155-6AU00-0CN0

IM155-6PN HF with server module, without bus adapter

6ES7155-6BA00-0CN0

IM155-6DP HF with server module (6ES71936PA000AA0)

and DP connector (6ES7972-0BB700XA0)

6ES7510-1DJ00-0AB0

CPU 1510SP-1PN (SIMATIC memory card required)

6ES7512-1DK00-0AB0

CPU 1512SP-1PN (SIMATIC memory card required)

6ES7510-1SJ00-0AB0

CPU 1510SP F-1 PN (SIMATIC memory card required)

6ES7512-1SK00-0AB0

CPU 1512SP F-1 PN (SIMATIC memory card required)

...

CPU 1515SP PC (configurator)

Base units
Base unit type B0, C1, D0, and F0
6ES7193-6BP20-0BB0

Base unit type B0, 12 push-in, 4 AUX, up to 230 V

6ES7193-6BP20-0BB1

Base unit type B1, 12 push-in, up to 230 V

6ES7193-6BP20-0DC0

Base unit type C0, 6 push-in, 2 AUX, for AS-i, Safety

6ES7193-6BP20-0BC1

Base unit type C1, 6 push-in

6ES7193-6BP00-0BD0

Base unit type D0, 12 push-in

6ES7193-6BP20-0BF0

Base unit type F0, 8 push-in

You will find options for combining peripheral modules with the base units and with the interface modules at
www.siemens.com/et200sp or in the TIA Selection Tool.

Labeling accessories
6ES7193-6CP01-2MA0

10 color-coding plates, color code CC01 (DI 8)

6ES7193-6CP02-2MA0

10 color-coding plates, color code CC02 (DQ 4 or 8)

6ES7193-6CP03-2MA0

10 color-coding plates, color code CC03 (AI 4)

6ES7193-6CP04-2MA0

10 color-coding plates, color code CC04 (IO-Link)

6ES7193-6CP71-2AA0

10 color-coding plates, color code CC71

(DI 8 with 10 AUX terminals), yellow-green

6ES7193-6CP72-2AA0

10 color-coding plates, color code CC72

(DQ 4 or 8 with 10 AUX terminals), red

6ES7193-6CP73-2AA0

10 color-coding plates, color code CC73

(AI 4 with 10 AUX terminals), blue

6ES7193-6CP74-2AA0

10 color-coding plates, color code CC74

(IO-Link with 2 x 5 additional terminals, 5 x red, 5 x blue)

6ES7193-6CP81-2AB0

10 color-coding plates, 4 AUX terminals,

yellow-green, CC81

6ES7193-6CP82-2AB0

10 color-coding plates, 4 AUX terminals, red, CC82

6ES7193-6CP83-2AB0

10 color-coding plates, 4 AUX terminals, blue, CC83

6ES7193-6CP51-2MC0

10 color-coding plates, color code CC51

6ES7193-6CP52-2MC0

10 color-coding plates, color code CC52

6ES7193-6CP84-2AC0

10 color-coding plates, 2 AUX terminals,

yellow-green, CC84

6ES7193-6CP85-2AC0

10 color-coding plates, 2 AUX terminals, red, CC85

6ES7193-6CP86-2AC0

10 color-coding plates, 2 AUX terminals, blue, CC86

6ES7193-6LR10-0AA0

500 labeling strips, light gray

6ES7193-6LR10-0AG0

500 labeling strips, yellow

6ES7193-6LA10-0AA0

1,000 labeling strips, 10 DIN A4, 100 labels per sheet, light gray

6ES7193-6LA10-0AG0

1,000 labeling strips, 10 DIN A4, 100 labels per sheet, yellow

6ES7193-6LF30-0AW0

160 equipment labeling plates

Additional accessories
6ES7133-6CV15-1AM0

5 BU covers, 15 mm

6ES7133-6CV20-1AM0

5 BU covers, 20 mm

6ES7193-6SC00-1AM0

5 shielding terminals, max. 2 cables

6ES7954-8LC02-0AA0

SIMATIC Memory Card 4 MB

6ES7954-8LE02-0AA0

SIMATIC Memory Card 12 MB

6ES7954-8LF02-0AA0

SIMATIC Memory Card 24 MB

6ES7954-8LL02-0AA0

SIMATIC Memory Card 256 MB

6ES7954-8LP01-0AA0

SIMATIC Memory Card 2 GB

Engineering requirements
STEP 7 via TIA Portal
STEP 7 V5.5 integration in the hardware catalog
GSD/GSDML
The ET 200SP can also be used in combination with SIMOTION and SINUMERIK as well as in the PCS7 environment.
CPU 1510SP and CPU 1512SP can only be programmed with TIA Portal, Version V13 Update 3 and higher.
CPU 1510SP F, CPU 1512SP F, and CPU 1515SP PC can be programmed with TIA Portal V13 SP1 and higher.

Highlights
CPU 1510SP-1PN, CPU 1512SP-1PN, and CPU 1515SP PC
Header modules with integrated controller and PROFINET connection are available for the
SIMATIC ET 200SP. With the three integrated Ethernet ports, the connection systems can
be flexibly selected by means of bus adapters. These CPUs feature the same functionalities
as the CPU 1511 and CPU 1513, such as integrated trace function, Web server and fully
symbolic programming. Connection to a higher-level CPU can be made in exactly the same
way thanks to the I-Device functionality. A PC system is available additionally in the form
of the CPU 1515SP PC.
siemens.com/distributed-controller
PRONETA
PRONETA ensures eased commissioning and configuration of your PROFINET network.
Your networks topology is automatically read in. You can either change the address
parameters of your SIMATIC ET 200SP station manually or use the parameters of a template. I/O modules can be parameterized, controlled, and monitored with the help of
PRONETA. The test results are logged in a clearly structured protocol.
siemens.com/proneta
TIA Selection Tool
The TIA Selection Tool offers assistants for the selection of desired devices and networks.
Moreover, it provides configurators for the selection of modules and accessories as well as
for the verification of correct operability. The TIA Selection Tool generates a complete
order list on the basis of your product selection or product configuration.
siemens.com/tia-selection-tool
SIMATIC ET 200AL
The compact modules of the SIMATIC ET 200AL are specifically suited for applications in
restricted spaces and for mobile applications thanks to their high protection class IP65/67
and compact design, small footprint, and low weight. They can be mounted in any
installation position by means of front or transverse screw attachment. The modules
can be incorporated in the automation network per PROFINET or PROFIBUS or through
integration of ET 200SP.
SIPLUS extreme
The ET 200SP convinces through usability and top performance in extremely compact
design. Thanks to its surface finish, SIPLUS ET 200SP can withstand particularly harsh
industrial environments, e.g. extended temperature range including condensation and
aggressive atmosphere, while working economically and reliably at all times even at
altitudes up to 5,000 meters.
siemens.com/siplus-extreme
Safety integrated
SIMATIC ET 200SP supports safety-related communication. The safety DI and DO modules
are equivalent in size to the standard modules. Their functional safety is certified in accordance with EN 61508. They are rated for safety-related applications up to SIL3 in accordance with EN 62061 and PL e in accordance with ISO 13849. As a special highlight of
SIMATIC ET 200SP fail-safe modules, the fail-safe addresses are assigned via engineering
during commissioning. This simplifies the setup process and saves time.
siemens.com/safety

Discover more:
siemens.com/et200sp
Discover
everything about
SIMATIC ET 200:
Descriptive animations of
ET 200SP functions
Further details on
design and modules
All about PRONETA
at www.siemens.com/proneta
All about the TIA Selection
Tool at www.siemens.com/
tia-selection-tool

SIMATIC
ET 200SP
take a look!

Subject to change without prior notice

Article No.: E20001-A171-P240-V1-7600
Dispo 06313
WS 101410.0
Printed in Germany
Siemens AG 2014
The information provided in this brochure contains
merely general descriptions or characteristics of
performance which in actual case of use do not
always apply as described or which may change as
a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly agreed in the
terms of contract.
All product designations may be trademarks or
product names of Siemens AG or supplier companies whose use by third parties for their own
purposes could violate the rights of the owners.

Follow us on:
twitter.com/siemensindustry
youtube.com/siemens

Siemens AG
Digital Factory
Factory Automation
P.O. Box 48 48
90026 Nuremberg
Germany