This document provides instructions for installing a PCI I/O card and its drivers. It describes installing the card into a computer and then installing drivers for Windows 98, 2000, NT 4.0, and DOS. Drivers are located on the included driver CD in specific folders depending on the card model. Windows installations are automatic or guided by prompts. DOS installation requires copying a file to the hard disk and running it. The document directs users to the manufacturer's website for updated drivers.
This document provides instructions for installing a PCI I/O card and its drivers. It describes installing the card into a computer and then installing drivers for Windows 98, 2000, NT 4.0, and DOS. Drivers are located on the included driver CD in specific folders depending on the card model. Windows installations are automatic or guided by prompts. DOS installation requires copying a file to the hard disk and running it. The document directs users to the manufacturer's website for updated drivers.
This document provides instructions for installing a PCI I/O card and its drivers. It describes installing the card into a computer and then installing drivers for Windows 98, 2000, NT 4.0, and DOS. Drivers are located on the included driver CD in specific folders depending on the card model. Windows installations are automatic or guided by prompts. DOS installation requires copying a file to the hard disk and running it. The document directs users to the manufacturer's website for updated drivers.
This document provides instructions for installing a PCI I/O card and its drivers. It describes installing the card into a computer and then installing drivers for Windows 98, 2000, NT 4.0, and DOS. Drivers are located on the included driver CD in specific folders depending on the card model. Windows installations are automatic or guided by prompts. DOS installation requires copying a file to the hard disk and running it. The document directs users to the manufacturer's website for updated drivers.
All other company and product names are trademarks or registered trademarks of their respective owners.
About the PCI I/O card
This PCI I/O card uses an all-in-one solution from NetMos Technology, which provides superior performance and unmatched data transfer rates. The most advanced feature is it uses of a single interrupt, which is set automatically by the host system and share among all on-board I/O ports.
Installing the PCI I/O card into your computer
1. 2. 3. 4.
Turn off your computer and all devices connected to it.
Remove the computers cover. Refer to your computer users manual for more details. Find an unused PCI slot and remove the metal bracket. Save the bracket screw for later use. Align the card horizontally with respect to the PCI slot and insert it into the slot firmly and evenly. Take care not to force it into the slot. Once you have properly positioned the PCI I/O card into the slot, secure the PCI I/O card with the bracket screw you have saved. 5. Replace the computers cover. 6. Turn your computer on. You are now ready to install the driver!
Driver Locations All the drivers for the following PCI I/O cards are located in these directories of the Driver CD: 1. 2. 3. 4. 5. 6.
NM9705 or NM9805 (1P)
NM9715 or NM9815 (2P) NM9835 (1S or 2S) NM9835 (2S1P or 1S1P) NM9845 (4S or 6S) NM9755 or NM9855 (4S1P or 2S2P)
This PCI I/O card supports Plug & Play features which makes installation in Windows 98 system fast and easy. 1. Start Windows 98. 2. Windows 98 Plug & Play features will automatically detect the PCI I/O card. Click the Next button to continue. 3. Select Search for the best driver for your device (Recommended) and click on the Next button. 4. Insert the Driver CD into the CDROM drive. Select Specify a location: and click the Browse button to continue. 5. At the Browse for Folder window: Select the CDROM drive. Double click on the NETMOS folder. Double click on the folder which contain the drivers for your PCI I/O card. Double click on the WIN98 folder. Click on the OK button. And finally, click on the Next button. 6. Windows 98 will automatically locate the driver in the Driver CD. Click the Next button to continue. 7. Click on the Finish button to start copying files from the Driver CD. 8. Windows 98 will automatically restart in order to update the hardware configuration. 9. Once Windows 98 has restarted, you can now connect your external devices to the PCI I/O card. To install the driver for the external devices, please refer to the external device users manuals.
Installing Windows 2000 Driver
1. 2. 3. 4. 5. 6.
7. 8.
Start Windows 2000.
Windows 2000 will automatically detect the PCI I/O card. Click the Next button to continue. Select Search for a suitable driver for your device (Recommended) and click on the Next button. Insert the Driver CD into the CDROM drive. Select Specify a location and click the Next button to continue. Click the Browse button to select the location for the drivers. At the Locate File window: Select the CDROM drive. Double click on the NETMOS folder. Double click on the folder which contain the drivers for your PCI I/O card. Double click on the WIN2K folder. Click on the Open button. Finally, click on the Next button. Click on the Finish button to start copying files from the Driver CD. Once driver installation is completed, you can now connect your external devices to the PCI I/O card. To install the driver for the external devices, please refer to the external device users manuals.
Installing Windows NT 4.0 Driver
Make sure Windows NT 4.0 is properly installed into your system first. 1. 2. 3. 5.
Start Windows NT.
Select RUN option in Windows NT. At the RUN option, click on the Browse button. At the Browse for Folder window: Select the CDROM drive. Double click on the NETMOS folder. Double click on the folder which contain the drivers for your PCI I/O card. Double click on the NT40 folder. Select NT40.EXE. Click on the Open button. 4. Finally, click the OK button. 5. Follow the instructions to finish up the driver installation. Your system will automatically restart in order to complete the driver installation.
Installing DOS Driver
Copy NMDOSIN.EXE to your hard disk and run NMDOSIN.EXE. For Help Option, run NMDOSIN.EXE/?.
Update Drivers Please visit this website: http://www.netmos.com for all the latest drivers for your PCI I/O card.
