Light Zone PDF

Light Zone City
for Joke M.A. van Hengstum
Light Zone City

Light Planning in tlie Urban Context
Christa van Santen
Birkhauser - Publishers for Architecture

Basel Boston Berlin
Contents
Foreword 6
The City as an Outside Interior 8
Beautification of the City 24
Public Lighting 34
Designing with Light 50
The Illumination of Buildings 68
Case Studies 90
Brandenburger Tor, Berlin 92 / Somerset House, London 94 / Cathedral
Basilica of Sint-Jan,'s-Hertogenbosch 96 / Colosseum, Rome 98/
Ostend 100/Bridges 104/Use of Colour no
Light Pollution 114

Maintenance 124
Foreword
Light in the city is necessary for orientation. Lighting makes it pos-
rules have been devised so as to avoid an excess of such light.
sible to distinguish streets, paths and parks, and allows users of public
A master plan for the lighting of a certain area is preferable to
spaces to see each other. The illumination of buildings, the lighting
individual designs that are aimed at one feature without taking the
of objects and of green spots in the city can also serve to beautify the
surroundings into account. A good master plan is tailored to the
surroundings, providing it is done well.
individual character of the environment and creates coherence in
The use of the incandescent lamp in the public environment has
the nighttime appearance of the place. The city at night is different
now had its day. The development of new light sources and accom-
from the city during the daytime. The daytime atmosphere cannot
panying luminaires has greatly increased our possibilities. Public
be imitated. The night can certainly be a little more 'mysterious' and
lighting nowadays comes in a number of varieties, all supplied with
have its own ambience. The architecture and town planning of a
cleverly designed optics. Yet sometimes it seems as though all exter-
location should serve as a guideline for a carefully designed lighting
ior light, not only for advertising, but also for the illumination of
concept. In many cities, there are fine examples of buildings that are
buildings and even street lighting, has become a marketing tool.
illuminated in a way that shows understanding of the significance
A fashion item that must be put on display and sold to the consumer.
of the architecture.
Coloured light is used whether it is suitable or not. It is suitable when
The thematic chapters of this book throw light upon the function
a party atmosphere is required or where it plays a functional role with-
of illumination in the city. To illustrate this, a variety of locations in
out detracting from the other light that is present; it is not suitable
different cities have been photographed and provided with a com-
when it makes the city resemble theatrical scenery. However charm-
mentary. These snapshots in time help to clarify the possibilities
ing and enchanting it may be, light that has the function of attracting
and the limitations of illumination.
the attention to advertising or of accentuating decorative elements

does not help to make a space more easily navigable. In many places,
Christa van Santen, February 2006
The City as an
Outside Interior
No two interiors are the same; even when a fashion trend is being
followed, there are still differences. An interior is the reflection of the
character and the circumstances of an individual. Much of what
transpires during the design of an interior also plays a role in the
design of the 'outside interior', in spite of the differences in scale. An
outside interior is still an interior; you can also talk in terms of walls
and a floor in this situation. What makes the outside interior of town
A different from that of town B, apart from the characteristic accents
of the skyline, which makes the town recognisable from a distance?
The town may lie on the sea, on a river, there may be canals or there
may be no water at all. It may be on a large scale or on a small scale:
with narrow streets or wide boulevards, small or large squares. In short,
the outside interior, regardless of scale, is formed by the architecture
of features including streets, squares, buildings and less obvious
elements, such as markets and other functional constructions. The
architecture can be cleverly employed in creating the nightscape,
and the architect needs to bear this in mind. Functionality and economy are all part of the equation.
The streets, squares and buildings give shape to the city. Experts
and interested parties recognise the urban-development and architectural ideas underlying the shape of the town: construction in parallel street layouts, in circles around a centre, and so on. Streets have a
direction; the orientation of a square is more complex. When you come
out of a street, a square offers an element of surprise: there may be a
church, striking buildings, a market, or something special might be
happening. A square has a private character, which appUes to a lesser
extent when, for example, it is situated on a wide thoroughfare. Squares
give a feeling of a large scale, openness, or, alternatively, intimacy, with
many degrees between. They create an overview and provide orientation in the area, allowing, for example, a view into side streets or of
places where roads meet. We also want to benefit from these daytime qualities and characteristics in the evening: the identification
of buildings, the view into side streets, the cohesion of the whole. The
illumination of water, parks and green spaces in the town also deserves
separate attention, because they have their own demands. The character of the town must not be lost through the use of artificial light.
Light is subject to fashion. New sources of light provide more
opportunities, such as the use of coloured Ught, which has become
a fad. The town as such needs to be harmonious, with an accent here
and there, not a constant disco or fairground, but in itself it's not
wrong to use coloured light. The use of coloured light is acceptable
and festive when it comes to special events and places that you go
for a night out. Use is often made of coloured light for fountains, for
example, which makes you wonder whether it is a new interpretation or a fleeting fashion.
TO
1
Vincent van Gogh, Cafi terrace on
the Place du Forum, i888 This is a
picturesque illustration of chance
elements coming together to create
warm and welcoming surroundings.
A single streetlamp lights the terrace.
The light from the houses and shopwindows, with the starry sky above,
contributes to the inviting nature of
this outdoor spot.
2/3
Kromme Waal, Amsterdam. By day
we see the surface of the water, the
boats and the line of trees. At night,
we see the light from the streetlamps,
the light from the houses and the
reflections in the water. The dome
of the Church of St. Nicholas in the
background, which is scarcely
noticed during the daytime, now
becomes a landmark feature.
Quai de Crenelle, Paris. One element

in the perception of the city: anonymous residential tower blocks. At
night, these illuminated objects have
a casual coincidence.
5/6
Pla9a Reial, Barcelona, is a square
with the atmosphere of a 'living
room', with a fountain, palm trees
and streetlamps with many branches.
There is no through traffic. Where
there's life, there's light. This, together
with the public lighting and the pale
colour of the walls and floor of the
square, determines the atmosphere.
The City as an Outside Interior
1/2
For this elegant square, Place Vend6me in Paris, efforts have been
made to achieve unity in its appearance during the day and at night by
illuminating the v\/alls in a consistent
way. The illumination comes from
lights that are incorporated into the
public streetlamps. An excess of
lampposts has been used to create
the desired consistency. It is inevitable that people are bothered by the
many lights entering their field of
3/4
Palais du Louvre, Cour Napoleon,
Paris. The pyramid is the centre of
this space, partly determining the
size and scale of the surroundings,
both during the daytime and at night.
A row of old streetlamps along the
facade provides light at pedestrian
level. There is sufficient light on the
square, which means the indication
of pathways in the form of low lightposts is superfluous. This can also
be seen from the photo taken in the
evening, where one line of lights is
not working.
5/6
Piazza del Popolo, Rome. From this
elevated position, the shape of the
square with its central column and
fountain can clearly be seen. It is
a large recreational square, with
traffic circulating around the outside.
A relatively low number of tall posts
with a number of lights provides
ample light for the whole area including the surrounding walls. The reflections in the wet floor add some extra
life to the scene. The water in the
fountain is lit up at night, providing
a new focal point.
12
Light is present in the evening and during the daytime. In the

evening, the accent falls on the light and its effect. Vertical light is
most successful at making us perceive space. During the daytime
vê see lampposts as part of the street furniture. Their shape and
size are important in relation to the environment; they are effective
features, although, like any other 'furniture', they often spoil the viev^.
In the redesign or renovation of squares and streets, attempts are
made to combine freestanding elements such as benches, litterbins
and lampposts, vîth the intention of creating a harmonious atmosphere. Designers of street furniture nowadays see this as part of
their task. There are areas of towns that have their own design and
illumination in an attempt to distinguish themselves from other
residential areas.
The material and the colour of paving, of house fronts and other
buildings have an influence on the light. A dark floor that does not
reflect much light is not good for visibility. Very shiny paving disorientates people, as can easily be seen after a rainstorm. Wet streets can
look very picturesque, but they create confusion when the light from
shop-window displays, advertising boards and public lighting reflects
annoyingly in the shiny paving. The pedestrian can have the feeling
that they are 'walking on water'.
Dark-coloured walls do not always help to create a pleasant atmosphere. But when all the exterior walls of buildings are lit up, it creates
an unreal feeling of space, in contrast to the dark sky. A light-coloured
wall reflects a lot of light, more than the average brick wall. Glass
facades reflect the light source, which makes them difficult to illuminate. We need to realise that illumination is something extra: it is
'more usual' for the facades to serve as walls for the outside interior.
When a building is illuminated, the colour and material of the
fagades have their own requirements for the type of light source. Each
lamp has a particular colour, which is what we perceive. Then there's
the ability to reproduce a particular colour (or colours), the colour
rendering. This means that you need to know the colour spectrum of
the lamp. There are, it should be said, light sources that reproduce
every colour, but some are better than others. So, when illuminating
buildings, you have to consider the reflectance of the various materials, the colour and the texture (matt or shiny). More light is not
always the solution. The colour spectrum and the amount of light
are determining factors in the choice of a light source.
13
1/2
Plaga Portal del Pau, Barcelona. At
the intersection of two roads (at the
end of La Rambia) stands a tall
column with a statue of Columbus,
which can be seen from a distance.
The disjointed surroundings mean
that this area is not perceived as a
square; the column is the only point
of orientation. The statues at its foot
are so excessively illuminated that
the rest of it can hardly be discerned.
You need to be a local to find your
way around.
3/4
Frankenplatz, Cologne. An outside
area bordered by the Kolner Dom,
the river, the railway line and the
museum. Pedestrians make a great
deal of use of the square; it is the way
from one part of the city to the other,
on either side of the Rhine. The floor
and the pathway alongside the railway
line link up the individual elements.
The choice of low lighting creates a
fragmented effect in the evening and
breaks up the coherence of the daytime appearance of the area. The tall
lampposts along the path keep this
route visible.
5/6
Piazza Navona, Rome, is an elongated
square with narrow entrances. The
axis is marked by three fountains, the
central, most monumental one of
which is by Bernini. The illumination
consists of light from the streetlamps
surrounding the central section and
the lighting of the fountains from
the water basin. Bernini's fountain is
the most striking. The terrace by the
building has its own lighting under
the sunshades. This is an acceptable
addition at pedestrian level.
7/8
Piazza della Repubblica, Rome. The
fountain in this busy square is the
centre of a traffic roundabout.
The building in the background has
the appearance of a closed fagade
during the daytime. At night, the
illumination of the piers places the
emphasis on rhythm. The lights
have gone out in places, which is
conspicuous in this repetitive rhythm.
The different colour of the lights,
caused by ageing in this type of light
source, is also noticeable.
15
1/2
Place des Terreaux in the heart of
Lyons, with the front face of the town
hall. A characteristic feature of this
square is the fact that there are no
lampposts and the luminaires for
the illumination of the buildings are
mounted on the facades. The central
part of the town hall with the tower
forms an unbalanced element in the
otherwise harmoniously illuminated
building.
A concept has been developed for the
whole square. Bartholdi's fountain is
positioned off-centre and lit from the
water basin. A design of spouting
water and light is incorporated into
the floor.
Architect!design Christian Drevet,
Lyons, and Daniel Buren, Paris
Lighting technology Les Eclairagistes
Ass., Lyon
3/4
The Mus6e d'Orsay, Paris, can be
recognised from miles around, a
landmark feature with its illuminated
strip and two clocks, which are a
legacy of its earlier days as a station.
5/6
The Museumplein, Amsterdam, is
a large open green plain in the city,
between a number of famous buildings: the Van Gogh Museum, the
Rijksmuseum, the Stedelijk Museum
(not visible) and the Concertgebouw.
It is clearly an attractive backdrop in
the dark, but forms an 'unassailable'
barrier for pedestrians. The illuminated pathways provide a direction,
but do not promote recognition.
The cool lighting of the extension of
the Van Gogh Museum and the warm
lighting of the Rijksmuseum, created
by the different materials and the
selected light sources, is a striking
combination.
Landscape architect S.I. Andersson,
Kopenhagen
Architects Van Cogh Museum
Rietveld / Van Dillen / Van Tricht
Van Cogh Museum extension
K. Kurokawa, Tokyo
Riji<smuseum P.j.H. Cuypers
i6
17
1
Avenue de Breteuil, Paris. This outside space is visually rounded offby
one of Paris' famous monuments: the
D6me des Invalides. The perspective
is emphasised by the public streetlamps to the left and right.
2
In the Jardin du Luxembourg (southern point), Paris, a fountain functions
as a partition in the park. It is an
individual object with no relation to
the surroundings, but nevertheless
a landmark. The illuminated sculptures and the jets of w/ater reflecting
the light come together to form an
image that is consistent with the
daytime appearance of the area.
3/4
The Eiffel Tower, Paris, is an icon of
the city, both in the daytime and at
night. The lighting plan for this tower
is an important element of advertising campaigns and its variety always
attracts attention.
Lighting design Pierre Bideau
Page 20/21
The 'Du Colldge' pedestrian bridge,
Lyons, forms a connecting route for
pedestrians over the River Rhone.
The (warm) light is incorporated into
the railings of the bridge, creating a
striking boundary to the walkway
without spoiling the view of the river.
Lighting plan Technical department,
Lyons City Council
i8
""9
20
21
22
1/2/3
Extension of the Palau de la Musica
Catalana, Barcelona. During the daytime, the reflection of the glass facade
creates a boundary for the square.
At night, the light within turns the
interior into a component of the
exterior space, making the writing
on the fa9ade more difficult to read.
The ceiling lights on the upper floors
behind the glass fagade make a contribution to the exterior perception
of the building at night.
Architects Tusquets-Di'az Architects
Studio
4/5
Plaâ Catalunya, Barcelona. A department store can be seen on this largescale square, as a backdrop to the
trees. At night, the light from the display windows, the carefully measured
light from the roof, the well-placed
illuminated advertisements and the
incidental light from the openings in
the fagade make it into a boundary,
in keeping with the scale of the
square.
23
Beautification
of the City
Visitors to European cities will experience most of them as a whole,

not as a collection of separate architectural elements. Yet these old
centres are frequently a motley selection of individual buildings that
have been constructed in different ages. In spite of the architectural
differences, during the daytime we experience the city as a whole,
because the daylight that is present throughout the city unites it in a
natural way. The light in the city at night is determined by all kinds
of factors. Many of these are incidental: light emission from shop
displays, lighting on terraces, light from cafes, restaurants, houses
and other buildings, light from the traffic. It's quite a tall order to
achieve a sense of unity at night, so that the layout and structure of
the city is still clear and recognisable in spite of all the incidental
factors. To do this, it is necessary to bring all the light into harmony,
as far as possible. Public lighting is no longer exclusively functional,
but should also be pleasing. The illumination of buildings, monuments and bridges and the lighting of fountains and other places of
interest is receiving more attention.
Many cities are being redeveloped, tidied up and reorganised.
They are being made attractive, and economic interests play a large
role in this. The term 'beautification of the city' is often used in this
context and everyone understands what it means: a city that has an
attractive and inviting appearance, even after dark. This boosts the
entertainment scene of the city, not only in terms of visits to the
cinema or the theatre, but also to cafes, restaurants and shops. The
basic principle lying behind this is: there must be something to do
and to see, the city must be 'liveable'. A feeling of safety is also
essential.
The lighting in the city in the evening and at night must create a
pleasant atmosphere, but should not dominate. When there aren't
many people on the streets, the surroundings must still be agreeable
and not threatening. This holds the attention of tourists and other
visitors for longer, so they make more use of the city. Residents should
be pleased because the Hghts help them to identify people and places.
More demands are being made of public lighting than ten or fifteen years ago. There is more light in pedestrian zones and on cycle
paths. Traffic requirements mean that a great deal of light has become
necessary on the roads, partly because the traffic density has increased.
In parts of the city and in socially deprived areas that have poor visibility, people expect a higher degree of lighting than elsewhere. More
light on the street is often transformed into a feehng of safety.
The atmosphere that light creates cannot simply be encapsulated
in rules: every situation is different. The situation as a whole is complex, not only involving costs, maintenance, energy - however important these factors might be - but also architectural, aesthetic and
emotional values. This demands - and this cannot be emphasised
26
1/2/3
When the cities wishing to hold the
2012 Olympic Games made their
presentations, Paris illuminated
embankments, bridges and so on.
As a display, this is seen as novel
and surprising, but as a permanent
illumination it comes over as a flashy
fun fair.
4/5
This continuous rov^ of shops on
the Kurfurstendam in Berlin has an
impressive appearance with no great
contrasts, which creates a pleasant
impression from pedestrian level in
the evening. More should be done
for orientation: with its focused lighting, the tall building, which isn't
noticeable in the daytime, becomes
a landmark. The public lighting is
limited to the pedestrian area, but
the appearance of the street is also
determined by the liveliness of the
illuminated display windows.
A collection of individual initiatives,
a random effect created by advertising.
A striking element is the building in
the background, where light has
been incorporated in the architecture.
The rhythm of the fagades is created
by the light on the reveals.
Beautification of the City
27
often enough - the involvement of designers with a good overall

view, knowledge and insight.
Badly designed lighting plans do harm to the city, bringing about
a lack of clarity and not contributing to the desired attractiveness. If
they are inefficient, they demand a great deal of energy and maintenance. When the plans are good and it is possible to talk in terms of
'beautification of the city', this is because attention has been paid to
the design and finishing features of the public space, so that the light
and the layout work together to produce an interesting look. This is
not simply a matter of design, but more a result of effective illumination.
Advances in lighting technology have made it possible, and even
simple nowadays, to dim the light from gas-discharge lamps. In the
same way, (programmed) changes in the colour of the light can also
be fully controlled. In principle, this has nothing to do with the
architecture itself; it's all about making temporary changes, to create
a mood or for a special occasion.
Most European cities consist of old and new architecture that
combines to determine the character of the city. Sometimes colour
may be used if an unusual effect or a special concept is envisaged.
Architectural cohesion requires balance in a three-dimensional, constructional sense, and lighting can help to ensure that the harmony
of the daytime appearance of a site may also be experienced at night.
The multi-coloured illumination that we see in photos from China
and other Asian countries is often in the context of a modern architectural setting and is a particular feature of the local culture.
28
1/2/3
During the day this office district near
Potsdamer Platz in Berlin is almost
boring at pedestrian level. The fa9ades
work like mirrors. It's a great deal
livelier in the evening, because it's
possible to see into the buildings.
The changing colours of the lighting
of the Sony Center at night create a
surprising effect amongst the unlit
buildings.
Architect Helmut Jahn
Lighting design Yann Kersal^
4/5
Pare de la Villette in Paris demonstrates that colour and a large amount
of light, combined with a large scale
and emptiness, do not have to result
in sinister or dismal surroundings.
The deserted park looks like an empty
film set. In reality, it's a popular area
for going out (and also a thoroughfare). Colour works effectively here
and makes it lively even when there
are no people there.
29
1/2
The Moll del Dipdsit, a busy boulevard
along the harbour of Barcelona, with
the History Museum of Catalunya at
the end. The text on the fagade is more
visible in the evening than during the
daytime. The appearance at night is
attractive in every way. The light in
the arcade and under the parasols
creates a link between the inside and
the outside. The bright, lively wall
and the head-height columns of light
provide sufficient illumination and
do not impede the view of the boats
in the harbour.
3/4
The high position of Fran ken pi atz in
Cologne, a pedestrian area that forms
the link to the Rhine, gives a view of
the river and the opposite bank. The
steps function as seating for events
(music and other performances) on
the square below. The low lighting
doesn't disturb the view and illuminates the difference in the levels.
5/6
Plein 1992 is in a new district in the
town centre of Maastricht. In addition
to residential units, it also has a
number of public facilities: the public
library, shops, a theatre and restaurants. The tall streetlamps form
one row with the trees and help to
define the spaces on the square. This
provides structure. The tall posts,
together with the light given off by
the buildings, provide sufficient
lighting.
Design streetlamps Coenen/Fransen
30
31
1
The street lighting of Corso Vittorio
Emanuele in Milan consists of luminaires in the arcades, supplemented
by some lights high up on the walls.
The street ends with the view of the
Duomo, free from lampposts and
other illumination that might disturb
the field of vision.
2
The layout of the Spui in Amsterdam,
a busy thoroughfare for pedestrians
and cyclists in the old centre, invites
you to stay for a while in the evening
as well as during the daytime. The
old lamps along the walls have been
retained. There is indirect lighting
at the division between the cycle
path and the pedestrian area, which
provides clear signposting in the
evening. Light has been installed
under the benches, an accent that
contributes to the anonymity of the
people using this space.
Lighting design Department of
Spatial Planning (dRO), Amsterdam
3
The Weesperzijde by the Amstel in
Amsterdam is designed as a pedestrian area. The new lighting consists
of a number of lights on a post,
which illuminate the ground. Above
the benches, which are placed back
to back, a line of illumination has
been installed. A combination of the
general and the specific. The use of
a number of lights on one post does
not disturb the view here, as there
are a lot of them and they are carefully directed. The plain nature of the
surroundings makes the slight contrasts on the light floor attractive.
Lighting design Department of
Spatial Planning (dRo), Amsterdam
32
33
Public Lighting
Public lighting has a history beginning in the sixteenth century with

candlelight and the oil lamp, which were superseded at the beginning of the nineteenth century by gas lighting and subsequently, at
the beginning of the twentieth century, by the light bulb and the arc
lamp. After the First World War, electric light offered a solution to the
coal shortage. The most important feature of the light sources that
have been developed in the past twenty years has been economical
efficiency: more light for less money and a longer life for the bulb.
One year has 8,760 hours: public lighting is on for approximately
4,100 hours of this, and the luminaire is visible in daylight for
4,660 hours. In the evening, attention is focused on the effect of the
light; during the daytime it is the support structure (luminaires and
posts) that plays a part in determining the appearance of the city.
Possible considerations are whether light is necessary, what sort of
light and how much, whether the illumination should be evenly distributed, direct or indirect, located on the building, directed at it or a
combination of the two. Then comes the selection of the light source
and the accompanying luminaire. Light colour, colour rendering and
light yield all play a role in determining the choice of lamp. The shape
and material of the reflector and the shielding of the lamp are determining factors in light emission. The following criteria apply in the
choice of the right illumination:
is there enough light in the chosen place.^
is the light evenly distributed (if that's the intention).^
is any inconvenience caused to the people who use the place.^
When people speak of sufficient light, they are in fact referring to the
luminance, the reflected light. The reflection of the light depends on
the type of surface: light or dark paving stones, asphalt, and so on.
Dark road surfaces reflect less light than brightly coloured road
surfaces. The effect comes from the interaction between lamp and
luminaire on the one hand and colour and texture of the road surface
on the other.
Depending on the height of the luminaire and the distance
between the lampposts, there must always be a measure of uniformity
in traffic lighting, and also in lighting for cyclists and pedestrians.
The 'cones' of light must overlap with each other. Research has demonstrated that this is at least as important as the amount of light.
As a result, recommended values have been established for the average luminance and the uniform distribution of light on traffic routes.
For streets with less traffic and squares in built-up areas that have
different types of surface, then a requirement for the illuminance is
sufficient, depending on the situation. The requirements for the
lighting are:
visibility of objects, to ensure safety and orientation;
recognition of people;
36
1/2
Three types of public lighting along
Passeigde Gracia in Barcelona:
'neutral' street lighting, a streetlamp
with five branches and the highly
imaginative design of A. Gaudi.
In general, in old town centres it is
hard to move away from the original
luminaires and streetlamps that have
been made over the years for candles,
oil lamps, gas mantles and, more
recently, the incandescent lamp. They
are always adapted as well as possible.
Now that light sources are becoming
ever brighter, and the requirements
for public lighting are defined more
precisely, it is often no longer possible
to adapt them. The addition of'neutral' traffic lighting is understandable
in this case. As far as the combination
of the five-branched streetlamp and
Gaudi's design is concerned, a better
choice would be to choose one or the
other.
Gaudi's design provides road lighting
and pedestrian lighting, combined
with a bench. A striking and characteristic element in the public space.
3
On the Rambia de Sta Monica in
Barcelona, the original streetlights
were no longer satisfactory. 'New'
lighting has been added, making the
old lighting superfluous. The lamppost here does not only support the
ordinary lighting, but also the accent
lighting. The lighting here consists
of a spotlight with glass spar underneath it (to diffuse the light and
prevent glare), which is not a good
choice, because it gets dirty.
4
A lighting element as part of the architecture of Pont Alexandre III in Paris.
It is an ensemble of bridge architecture, sculpture and lighting.
5/6
A view of Pont Alexandre i ii in the
direction of Hotel des Invalides and
a daylight view in the direction of the
Grand Palais. The historical monument has been treated with care, so
that the lighting creates a coherent
overall picture.
Public Lighting
37
1/2
Passeig Llui's Companys in Barcelona
is a pedestrian area. The streetlights
are an element of the elongated space
that is oriented toward the Arc.
Readers make frequent use of the
benches under the lampposts, even
after dark.
3/4
Two old decorative lampposts form
the central point of this enclosed
neighbourhood square in the district
of El Born (La Ribera) in Barcelona,
during the daytime and at night.
5/6
An example of the illumination of a
square: Cour Carrie at the Louvre in
Paris.
The walls have been illuminated by
the simple lights placed along them.
The connection with the following
spacQ is accentuated by two manybranched streetlights. The footpath
lighting, a later addition, does not
add anything to the situation.
7
The public lighting on Pont de
Bir-Hakeim in Paris is incorporated
into the structure of the bridge. The
line of illumination is formed by the
uppermost part of the bridge, where
the M^tro runs, and the construction
with the luminaires beneath, which
provides illumination for the passing
traffic on both sides. This means that
the pavement along the parapets of
the bridge enjoys an unimpeded view
of the river.
38
comfort and well-being;

the ability to create three-dimensional shapes (plasticity): not only for
the recognition of people and objects, but also for general comfort;
it is important to prevent glare - the brightness of the light must
be limited or shielded in (almost) horizontal directions;
light colour: the visible colour of the light must suit the surroundings;
colour rendering: doing justice to colours plays a role in social interaction. The colour of clothing, for example, must be clearly identifiable in pedestrian areas. From a security point of viev^, the recognition
of colours is also important, for example, in witness statements to
the police;
the light source should generally not be visible.
However, when choosing the light it must be possible to have a certain
degree of flexibility to deviate from the standard model in order to
achieve a more creative approach. Town planners and architects have
the tendency to consider the shape of luminaires and street lamps
first, the 'daytime look'. The technician pays attention to the practical
issues: reHability, soundness, resistance to vandalism, durability.
The lighting advisor or lighting designer considers all aspects: functionality and related issues, and then finally the form. The advisor
may deviate from the traditional arrangement of posts with luminaires/lamps, for example, in a pedestrian area, where the requirements for the uniform distribution of light are not as stringent as
for roads.
Public lighting is now so widely accepted that it is also seen as a
way to support the structure of the city. The city has specific spaces
and anonymous spaces. If more light has been allocated to the specific spaces (boulevards, entertainment areas) over the course of time,
the contrast with the anonymous side streets is too great. In some
cities, lampposts are no longer used in such situations and the light
source and luminaire are changed. The difference between main
streets and side streets, between squares and long avenues, between
shopping streets and residential streets is boosted not only by making a difference in the amount of light, but also in the colour of the
light. This difference can contribute to clarity, as long as there is a
balance and a connection between the two. Public lighting can create
a relationship between the light of the illuminated buildings and
objects so that, in spite of all the random factors in the illuminated
areas of a city, a composition can be achieved that makes it possible
to experience the image of the city at night as a pleasant whole. Light
is a construction material and that's the way it's used.
Pedestrian areas, cycle paths and roads quaUfy for pubUc lighting. For all categories, there are recommendations and norms, which
are agreed internationally and sometimes adapted to national condiPublic Lighting
39
tions. The recommendations for pedestrian areas are different everywhere, depending, for example, on the type of district. The focus is
always on the feeling of safety, with sufficient light on the street, not
too many dark areas and a view of the traffic. Where there is a lot of
light, the immediate surroundings may appear darker than they are
in reality. People adapt to the light that is present. There is a sense
that the light is sufficient when there is no excess of light in the surrounding area. It's about the balance of brightness. A criterion that
is currently applied is that people should be able to recognise each
other at a distance of four metres. Key factors in this are safety for
pedestrians and road-users.
There are also rules for cycle paths now, as the bike is such a
popular means of transport. Standards have been set up for motorways, to which people have to adhere. The number of cars has gone
up, the density of traffic on the roads has increased and the speed of
the traffic is higher. The rules are regularly re-examined and tested
for road safety.
Public lighting is autonomous and those responsible for it don't
take into account all the other light that is present in the city, from
illuminated buildings and all kinds of incidental situations that produce light. In different European countries there are guidelines for
public lighting. To achieve some uniformity, a European norm has
been established: EN 13201 'Street Lighting'. Given the wide variety
of traffic situations, four classes of lighting are distinguished:
ME
lighting class M o t o r w a y Europe
CE
lighting class Conflict (area) Europe
lighting class Slow (traffic)
Es
lighting class E Semi-cylindrical (facial recognition)
Lighting classes CE and s apply in this context. The CE class relates

to the lighting of roads with motor vehicles and other road-users
such as cyclists, moped riders and pedestrians, especially in complicated traffic situations such as shopping streets, complicated crossings, traffic roundabouts and areas where lots of traffic jams occur.
The standards can be applied to long roads with mixed traffic types
and also for sections of road that are intended only for pedestrians
and cycHsts, such as underpasses.
This table shows the CE-series lighting classes. The meaning of
the terms is as follows:
^h
average horizontal illuminance;
^h
horizontal illuminance uniformity, which is the ratio between the lowest and the average value.
The differences between the classes are linked to the traffic conditions.
40
1/2
Atotal concept for bridge and illumination by architect H.P. Berlage. The
illumination of the Berlagebrug in
Amsterdam consists of luminaires
suspended from cables for the traffic
and lampposts with lighting for
pedestrians and cyclists. The original
incandescent lamps have been
replaced by compact fluorescence.
3/4
The public lighting of Passeig de
Colon in Barcelona is elegant and
timeless, in keeping with the architecture and the public space. It has
an impressive, stylish appearance
both during the daytime and in the
evening.
5
Champs Elysês, Paris: the old lights
create the atmosphere and the new,
tall lampposts ensure that the light is
dispersed. The old lights no longer
have any logical relationship to the
modern surroundings.
6
It is obvious that public lighting is
also expected to support and clarify
the structure of the city, and that main
traffic arteries should receive more
light than side streets and spaces
where there is little traffic. In Lyons
a distinction is also made in the
colour of light used in public illumination.
Public Lighting
41
1
Avenue C^ramique in Maastricht is
a road through a newly developed
area on a former industrial estate in
the centre of the city. There are tall
lampposts for cars and buses, with
lower lighting fixed on the same post
for cyclists and pedestrians. The
division is emphasised by the use
of two different colours of light. The
light source in the illumination for
the traffic has a high light yield and
limited colour rendering. The lower
light source has a lower light yield
and better colour rendering. This
is important, because cyclists and
pedestrians need to be able to recognise each other easily.
Lighting design L i T E - Ch rista van
Santen/ir A.j. Hansen, Amsterdam
2/3
A double wall light on the facade
above the pavement on Passeig de
Gracia in Barcelona. The old streetlight, which has been given a modern
light source, is a reminder of the old
style of the street.
4/5
The narrow Carrer Sant Francesc de
Paula has wall lamps with a white
light source, as is often the case in
Barcelona. The warm light from the
Palau de la Musica combines with it
to create a pleasant atmosphere.
6
The metropolitan nature of Rue de
la R^publique in Lyons is expressed
by the high positioning of the wall
lights, which also illuminate part of
the facade. Together with the lights
from the display windows, this creates
liveliness and not too much contrast.
The ground spotlights are intended
for the trees. This sort of lighting is
only effective when there are leaves
on the trees.
42
CE lighting classes
Horizontal illuminance
Class (decreasing
Eh I X
Uhix
CE 1
30
0.4
CE 2
20
0.4
CE3
15
0.4
CE4
TO
0.4
CE5
7-5
0.4
complexity of traffic)
The s class applies to the illumination of footpaths and cycle paths, hard
shoulders and other sections of the road, separate from or alongside
the traffic lane; also for streets in residential areas, car parks, and so
on.
s lighting classes
Horizontal illuminance
Class
Eh I X
^min IX
^h min IX
S 1
15
0.3
S 2
lO
5
3
S3
S4
7.5
5
3
1-5
0.2
S5
s6
S7
0.3
0.2
0.6
0.2
0.6
0.3
orientation lighting
The choice to use an s class depends on factors that include the

number of cyclists, the need for recognition of faces (mainly in problem areas). The standard for each of the many possible situations
needs to be consulted. The tables indicate the limits within which the
requirements lie. It goes without saying that luminaires are designed
to direct and diffuse light according to these standards.
Public lighting in pedestrian and residential areas is generally on all
night and during the dark hours of the evening. In a large number
of European cities, depending on the area, half of the public lighting
and the illumination of most of the buildings is switched off after
midnight, for example, in order to save energy (and sometimes for
the sake of the atmosphere at night). The uniformity of the public
lighting must still be preserved, as contrasts are undesirable, partly
because of the safety aspect. The luminaires along roads in built-up
areas often have a number of light sources, and it is a simple matter
to switch off one or two of them in the late evening when there's a
lull in the traffic. Less Hght when there's less traffic and more hght
when there's more traffic. A more dynamic approach has already been
adopted in some places: when busy traffic approaches, more light
comes on automatically, and when the frequency of traffic decreases,
it goes off again.
Now that many gaseous discharge lamps can be dimmed, this is
one of the possibilities. Illumination that is varied in this way saves
Public Lighting
43
energy and generally increases the life of lamps and luminaires.

This is an approach that demands the rapid identification of Hghting
failure, which now happens via computer-controlled systems.
The development of luminaires for public lighting is a steady process;
it's not something that is directly subject to fashion. However, it is clear
that design is becoming ever more important in this area as well.
Street lighting is now seen as an important part of the furniture that
adorns the public space. A well-thought-out optical system that directs
the light in an effective way is packed into a modern design. In addition to this, there are requirements for resistance to vandalism, prevention of dirt and damp, etc. The design must be able to 'withstand
a good bashing'. The required dust and water resistance (1P65) must
be satisfactory for roughly ten years.
The illumination of large roads is currently in development,
because new light sources are coming onto the market. They have a
practical purpose alongside the road, rather than an aesthetic one.
Luminaires alongside cycle paths are still much like the illumination alongside large roads; they're just somewhat more modest in
size and the posts aren't as high. Illumination of roads and cycle
paths may be combined on one mast, with the luminaire for the cycle
path positioned somewhat lower: this is functional illumination. It's a
different story in pedestrian areas. There are various expectations of
the luminaires as far as light emission is concerned, but the appearance of the post and luminaire, as visible in daylight hours, is also of
importance, whether it's intended to be unobtrusive or, conversely,
to be a striking addition to the other street furniture. In the evening,
the design is scarcely visible and only the light it emits is seen and
judged.
The old lamps that were once designed for gas mantles and later
incandescent lamps are often still used in pedestrian zones in older
areas of the city. They have to be adapted to accommodate modern
gaseous discharge lamps. These light sources provide a great deal of
light and are often so bright that they become a nuisance or are even
dazzling. They need to be shielded, for example, by placing slats over
the light source. It is also possible to replace the glass with structured plastic, which diffuses the light emitted by the lamp somewhat,
or by opaque plastic (available in various degrees of transparency).
Opaque globes are often used. There is no objection to the form as
such - it's just a covering of the lamp with no further optical devices,
which means that the globe lights itself up more than the surroundings. The globes serve more to provide orientation than as effective
illumination. However, you can expect some light yield when there
are nearby reflective surfaces with a light colour, for example, walls
or paving.
44
1
Bright facades of rich Spanish architecture on Avinguda Diagonal in
Barcelona. The luminaire emits light
on all sides, lighting up the footpath
and giving a natural looktothefa9ade.
The high-positioned street lighting
(not visible here) casts some light
back, supplementing the existing light.
2
On Rue Clotilde, behind the Pantheon
in Paris, there are old streetlights
that light up the road and the footpath for pedestrians. Lights for the
illumination of the facades opposite
have been incorporated into the
streetlights. This is a good solution,
but lots of streetlights are needed
in order to achieve a uniform distribution of light.
3/4/5
This footpath in Pare de la Villette in
Paris is marked out by orientation
lighting. Where lighting is needed,
a light has been added to the original
luminaires, as can be seen from the
rhythm of light and dark along the
path. This combination of nev^ lights
and original lighting gives the
impression of a stopgap measure.
Public Lighting
45
In recent years, indirect illumination, with a light shining upon

the surface mounted above it, has become increasingly common.
The diffusion of the light is linked to the way in which this surface is
bent or shaped and to the structure of the surface. A light surface
has the disadvantage that it may become dirty and is sometimes
annoyingly bright against a dark sky. Solutions for this have also
been found. This type of lighting is used where there is not one particular spot that needs to be illuminated, such as in parks ^ green
areas, alongside water, and sometimes along boulevards in large
cities.
In narrow streets or where there are lots of obstacles in the
street, luminaires are hung up on cables strung between one building or post and the next. The same requirements exist for these
luminaires as for the luminaires that are mounted directly onto
posts. In situations where it is preferable not to place lampposts in
the street, wall-mounted luminaires offer a solution. There are old
versions and also modern designs. They are additions to the frontage of the building; they must be carefully positioned and the electricity supply must be concealed as elegantly as possible.
Several lights on the same post provide various possibilities.
They can be placed around the post and light up the surroundings
in different directions. In some cases it's possible to light up an object,
a monument or a wall (section) from the group of lights attached to
the post.
Lights are originally functional objects and are usually not directly
visible. Now that they are increasingly being used in the public space,
designers are also paying attention to the way they look - without
impairing their functionality.
46
1
The Grote Circus, an indoor public
space amongst the modern residential construction on Avenue C^ramique
in Maastricht, contains greenery that
is intended to provide atmosphere
for local residents at night. The installation of indirect lighting that illuminates in every direction gives a clear
view of this park-like site.
Lighting design L i T E - Ch rista van
Santen/ir A.J. Hansen, Amsterdam
2
The design of five lights in a row, distributed over one arm, is problematic.
So as to avoid nuisance, they must
be directed downwards. With any
other direction, there's a considerable
risk that they will disturb passers-by
and local residents.
Lighting design Beth Gali, Barcelona
3
Lighting suspended on cables between
opposite facades, following the movement of the street. There is a good
distribution of light and the fronts of
the buildings are drawn into the light
in a natural way.
4
The Wilhelminabrug in 's-Hertogenbosch has tall pylons on both sides,
which means that the bridge functions
as a gateway to the city. The pylons
have light at the top and the bridge
railings are equipped with a line of
fluorescent tubes. The distribution of
the light over the pavement is good,
but the shielding could have been
designed better. Seen from a distance, the illumination is dazzling.
Public Lighting
47
1/2
The somewhat grotesque lampposts
on the Schouwburgplein in Rotterdam,
which can adopt different positions
in the same way as hoisting cranes,
are a reference to the large scale of
the port. Fluorescent tubes are positioned here and there underneath
the perforated metal floor tiles, contributing a degree of light to the floor.
This is an urban layout with a lot
of design and the light is limited to
a few areas. The symbolism of the
design is more important than the
public lighting.
Design public space Adriaan Geuze/
West 8, Rotterdam
3
The illumination of the Millennium
Bridge over the Thames in London,
the pedestrian link between St. Paul's
Cathedral and Tate Modern, is invisible in the daytime. The strips on both
sides along the aluminium bridge
surface follow the footpath and provide enough reflection for users of
the bridge to be able to see each other.
The lighting consists of transparent
synthetic tubes with a reflective
material on the inside that is uniformly illuminated along the whole
length by a projector with a single
lamp. The projectors are concealed
in the dark sections.
Bridge design architect Sir Norman
Foster, in collaboration with Sir
Anthony Caro.
4
LEDS as a new light source for pedestrian routes are becoming increasingly
popular with various lighting designers, partly because they last for so
long {40,000 hours) and have such
small dimensions.
Use has been made of white and
orange LEDS, a combination that gives
a warmer glow. The distribution of
the two light points at a height of
around 4.5 metres is indicated in
illuminance (lux).
Luminaire Equinox, Philips
Nederland
5
The street lighting in Rue du Tr^sor
in Reims consists ofwall lamps. In
the background is the illuminated
Notre Dame cathedral. This is a
harmonious combination of two
diflFerent sets of illumination. Was it
coincidental or intentional? Such
harmonious sensitivity is a rarity in
the town.
48
Public Lighting
49
Designing
with Light
1
French Church, Cendarmenmarkt,
Berlin. Limited wall surfaces with
relatively high luminances appear
too bright. The illuminated sections
behind the tympanum contrast so
strongly with the foreground that it
can hardly be seen. The lights have
probably been mounted at too short a
distance and the lamps probably have
too high a wattage. The jumps from
1 to 9, to 26 cd/m^, are too large. The
figures indicate the level of luminance.
2
If you look along the path of the
light, the lack of shadow means that
no relief effect is created. With a
detailed facade that is illuminated
from one side, the viewer has to look
from the opposite standpoint.
3
Fagades on the water often have
beautiful reflections. When a facade
is illuminated, the lights must be
placed close enough to the wall that
the light does not hit the water first,
making reflections of the water appear
on the fagade.
4
An example of light-source spectra
as provided by the manufacturers.
This is a graphic representation of
the colours that occur in a lamp. It
clearly shows that if a colour is absent,
or practically absent, from a lamp,
then it will not be possible for it to
distinguish that colour.
(Details from Osram)
5/6
Piazza del Campidoglio, Rome,
a combination of architecture and
sculpture. During the daytime, the
statue and the building in the background are the same colour. The
choice of light source means that the
red brick and pale stone can clearly
be distinguished at night.
52
Daylight cannot be imitated; it simply is. The amount of daylight can

change from one minute to the next. The colour of daylight changes
from cool to warm; this so-called colour temperature is expressed in
Kelvin (K). Solar altitude cannot be matched. To make surroundings
visible at night, artificial light must be employed. Lighting is a form
of design; the illumination of buildings, monuments, fountains and
parks demands professionalism. Lighting specialists have to take
various elements into account:
the effect that should be achieved and what needs to be made visible;
the desired level of light (which allows the number of lamps and
luminaires to be determined);
what sort of lamp is most suitable;
where the lights can be placed.
What people perceive is not the light faUing on a surface, but the light
reflected back from it: the luminance. To make a tall building appear
relatively uniform when seen from the standpoint of a person, it is
necessary to illuminate the highest part more intensively than the
bottom. So the aspects from which a building is seen must always
be taken into account. The lights must not be placed at that height,
because there are no shadows in situations where people are looking
directly along the path of the light. Only the combination of light and
dark sections allows forms to be shown to their best advantage. Large
contrasts in light on an exterior wall, however, result in an unpleasant
appearance: keeping within a ratio of i:io is recommended. A certain
uniformity in the object that is to be illuminated is generally desirable,
as too great contrasts fragment the architecture. The further the lights
are placed from the wall, the more uniform the effect. However, this
also has drawbacks: the wall becomes 'flatter' and the further the light
sources are placed from the wall the greater the likelihood that the
surroundings will be disturbed.
Flat walls of buildings without projecting or recessed parts can be
lit in an interesting way. No shadows can be created. The only form
of plasticity and variation is to be achieved through a difference in
brightness, for example, by an asymmetrical arrangement of floodlights, or sometimes by a small difference in the colour of the light. At
night, you look at buildings through eyes that are adapted to the dark,
so the differences in brightness do not have to be large to be perceived,
as long as the contrast with the surroundings is sufficient.
A detailed facade with many recessed and projecting sections
sometimes results in strong shadows. To avoid this, the shadov^ areas
can be softened with additional direct light from another angle.
The amount of light and its distribution over the object, determined by
the position of the lights and the choice of light source, is the most
Designing with Light
53
important factor in achieving the desired result. As far as the positioning is concerned, a combination can be made of the following
options:
on the building
on the ground in front of the facade
on masts or poles
on buildings in the area (when this is unavoidable)
Reflective fagades produce specific problems. People want to experience the reflection, but at the same time not be blinded by it. If lights
are positioned above eye level, there is a risk that people will be dazzled.
Lighting from below produces reflections from the viewing angle.
Lights are often reflected in the shiny surface when they have not been
arranged properly. Lighting from above is preferable in this situation.
For facades that rise up out of water or stand close to the water,
the lights must be placed as close as possible to the facade to avoid
them being reflected in the water and creating rippling circles of
light on the facade, so disturbing the exciting reflection of the architecture in the water.
Recommendations for the illumination of buildings are usually
given in luminance values, which are related to the reflected light.
The required illuminance is connected to the brightness, light or dark,
of the surface (the reflectance) and to the light levels in the surrounding area. In dark surroundings a lower illuminance is necessary than
in light surroundings. A freestanding building that stands out against
a dark sky needs much less light than a fagade in a brightly lit street.
The relationship between luminance, reflectance and illuminance
is expressed in the following formula:
L=EXP
or
E= JIXL
luminance (candela/m^)
illuminance (lux)
reflectance
Assuming a particular value for the luminance and where the reflectance of the surface to be illuminated is known, then this formula can
be used to work out what the illuminance should be. Recommended
luminances:
Situation
L (cd/m^)
freestanding building or statue
3.2-6.5
building in a street or on a square
54
in dark surroundings
6.5-10
in well-lit surroundings
10-13
1/2/3/4
ING House, Amsterdam. The architecture catches the eye because of its
shape and the combination of volume
and glass. A characteristic feature of
the design is that during the daytime
it is possible to see inside the building. This quality should also be
retained at night. The closed bulk of
the building is illuminated and the
transparent part is made visible without losing the shape of the whole.
The illumination at night provides an
intriguing view into the interior, with
its indoor gardens and stairwells.
Lighting design Lite - Christa van
Santen, Amsterdam
Architects Meyer en Van Schooten,
Amsterdam
55
A dark wall absorbs more light than a wall with a light colour, with
a number of variants in between. So, there is no point in lighting
a dark wall. The reflectance of most building materials is known. In
order to achieve some sort of effect, this must be equal to or greater
than O.2.
material
condition
reflectance
yellow brick
new
0.3-0.4
0.15-0.25
red brick
new
brick
dirty
0.05-0.1
white marble
clean
0.6-0.65
granite
clean
0.1-0.15
concrete
light
0.4-0.5
concrete
dark
0.2-0.3
concrete
dirty
0.05-0.1
plasterwork (pale yellow)
new
0.35-0.55
This information makes it possible to work out what illuminance is

necessary in order to produce the desired luminance. Here are some
examples from the luminance table, based on the lowest values:
Illuminance E (lux) for a building in a street or on a square:
dark surround ngs
light surroundings
white marble
35
light concrete
50
55
80
yellow brick (new)
70
105
dark concrete
100
160
granite (clean)
200
310
The number and type of luminaires is determined by these figures

and the selected lamp. To work this out, you need the documentation
with the technical specifications of the luminaires. In addition to this,
you have to know at what angle and from what distance the surface is
being lit. Every lighting manufacturer supplies software for these calculations, which designers can use. Whatever the circumstances,
when positioning the luminaires, care must be taken to ensure that
the desired effect is achieved and that no glare is produced. The aim
is to keep the lights out of the field of vision; they must preferably be
arranged so as to be visible as little as possible.
The choice of the type of lamps depends on the colour and structure of the object that is illuminated. The variety of the same type of
lamp has increasingly expanded in recent years. The two factors determining the choice are the colour of the light, which must fit in with
the light of the surroundings, and the colour rendering, which must
produce the best possible appearance for the illuminated surfaces
and details. Good colour rendering in the light is primarily of importance when colours in the facade need to stand out. The following
lamps are available for illumination:
high-pressure sodium lamps
metal halide lamps
fluorescent and compact fluorescent lamps
56
1/2
Section of the Banque de Lyon,
Lyons, which changes with illumination. The building originally has a
horizontal alignment. The illumination of the piers adds a vertical
component, giving the architecture
a different look. The position of the
company name in blue is high enough
not to be disturbing.
3/4/5
Avinguda de la Reina Maria Cristina,
Barcelona. A recurring programme
of water, light and sound forms an
evening spectacle that attracts many
visitors. The computer-controlled
coloured lights create a varied and
fascinating event.
57
halogen lamps
high-pressure mercury lamps are still on the market, but are not
used much now because of environmental concerns
High-pressure sodium lamps, with a colour of light ranging through
many variants from golden yellow to whitish, are often used in the
illumination of monuments made of brick, stone or stucco. The
amount of light produced is greater than that of other light sources.
Metal halide lamps - every make has its own coding - are able to
render red, yellow, green and blue. They are often used in more modern settings. With age, discoloration of the light can occur, a technical
problem that still has not been completely solved. This is particularly noticeable when the lamps are in view. Like high-pressure
sodium lamps, they have a long average life of 8,000-10,000 hours
and a high degree of luminous efficiency. Both light sources can be
used for luminaires with wide and narrow beams.
The large variety of fluorescent and compact fluorescent lamps
makes it possible to select a particular light colour and colour rendering. Fluorescent lamps are often seen in street lighting as well as in
the illumination of buildings, close to the facade or inside. Their shape
means that these lamps cannot be used in floodlights, but compact
fluorescent lamps can, because, as the name suggests, they have a
more compact form. They also have an average life of 8,000 hours.
Halogen lamps are mentioned last because, compared with the
other light sources, they are the least energy efficient, as they have a
shorter life; depending on the make, they last for an average of
2,000-5,000 hours. However, new developments mean that manufacturers can now supply halogen lamps with a life of 10,000 hours.
The colour rendering of halogen lamps is very good for all colours
and the colour of the light remains constant, even when they become
older. With the right choice of luminaires they can be used effectively
for the accentuation of features of facades and sculptures. These qualities mean that halogen lamps are often employed in museums.
With the exception of the halogen lamp, which renders all colours
well, it is necessary to know the spectrum (the spectral composition)
in order to make the correct choice, i.e. which light source makes the
colour and texture of the object look the best. Suppliers know the
colour spectrum of every lamp.
58
1/2
Forum Romanum, Rome. An exhibition of individual remains from different periods of architectural history.
During the day they appear to form
a coherent whole. The imbalanced
illumination means that this coherence is lost at night, with the objects
themselves appearing 'deformed'.
3/4
Section of the Colosseum, Rome.
Form and plasticity are clearly
emphasised through the use of light.
The closed recessed upper part has
a white shade of light. The open
arcades and the background have
a warmer light colour. The third
dimension is clearly made visible by
this illumination, looking as it does
naturally during daylight hours.
5/6/7/8
The illuminated Opera Gamier, Paris,
may be seen from afar, primarily
because of the excess of light. This
means that the colour differences in
the fagade are lost to a certain extent.
The gold can scarcely be discerned.
Floodlights create an imbalance in
the illumination, particularly in the
upper part. The sculpture on the roof
receives more light on the left than
on the right, which is the fault of the
floodlights. A positive point is the
fact that they are placed so high that
they don't disturb people at street
level. The figures indicate the level of
luminance.
Page 60/61
Ponte Vittorio Emanuele II, Rome.
City bridges are architectonic elements that are often illuminated.
A bridge is a three-dimensional element that is determined by the passing traffic, going over it and under it.
The emphasis here lies on the traffic
over the bridge, further accentuated
by the statues, which are only illuminated on the road side. Going over the
bridge, you no longer see the water.
The traffic upon the water goes its
own way.
59
6o
61
Illumination of a building in most cases implies: lighting from without and within. Illumination takes place from outside. Lighting from
within usually means that some of the existing Hghting is left on.
Sometimes emergency lighting already shines out sufficient light or
special arrangements are made. It is obvious that light from outside
and inside the building needs to be brought into harmony. Light
shining out of a building is an extra, the finishing touch of good
illumination.
The aim is to create a sense of openness; architecture is all about
space, light from inside can also help. A lack of openness comes about,
for example, when various colours of light are used without any
thought to their combination. A disjointed architectural image can
also be created when incidental features are illuminated detail by
detail. For example, when piers are lit up for no reason, the illumination breaks up the architecture. However, when a pier contains a
special sculpture, it is appropriate that it be illuminated so that it
receives attention.
Fountains are pleasant additions to the cityscape. An illuminated
building, however beautifully it may be lit from within and without,
is a static image. Stretches of water and fountains create liveliness
and make the surroundings look particularly cheerful. Illuminated
fountains look best against a backdrop that is as dark as possible,
particularly when coloured light is used. Large squares or wide boulevards are suitable surroundings. Jets of water and vapour act as
diffusers, absorbing and dispersing the light that is directed at them.
It is best to position luminaires under the water surface; just a single
light source under a jet of water produces an attractive effect. For
wider screens of water, more lamps are needed. External light weakens
the effect of the already 'weaker' fountain illumination.
The illumination of town parks demands special attention. In
parks that are still open after sunset, the visitor needs to know what
happens where. There must be a good view of the pathways, and
that also applies to any cycle paths. The feeling of safety is also a factor. The transition from the well-lit street to the park must not be
abrupt as far as light is concerned, but naturally tuned to the adaptation of the human eye.
In order to create a peaceful atmosphere, trees and bushes are
often illuminated. In a park or a grassy area with trees and bushes,
the choice of the right lamp is precise work. Deciduous trees need a
different light source from conifers, for example. Quite a lot of light
is lost in the illumination of trees and wooded areas. It is also true
here that not everything has to be illuminated. On the contrary, trees
with interesting shapes can just as well be left in the dark and be
used as a silhouette, creating a feeling of depth and making the whole
scene more lively.
62
1
The Louis Philippe bridge over the
Seine in Paris. The directions of the
traffic on and under the bridge are
made clear by the use of light. This
three-dimensional presence has a
harmonious appearance, with successful illumination of the whole
bridge and of the view through the
bridge.
2/3
The Pont Neuf, Paris, consists of two
sections, connecting both riverbanks
via the lie de la C\t6. The Pont Neuf
has a recognisable shape, which can
be seen well both from a distance
and from close up. A special feature
of the Paris bridges is that traffic also
passes under them along the banks
of the Seine.
4/5
The Blauwbrug over the Amstel in
Amsterdam with its sculpture work
and double streetlamps, which are
part of the total design. The sculpture
work is illuminated; the passageway
on the water is missing from the
illumination.
63
1/2
Magere Brug, Amsterdam. A typical
Hohenzollern Brijcke, Cologne.
feature of the illumination of Amster-
Railway line with a pedestrian bridge
dam bridges is the emphasis of the
over the Rhine. A great deal of use
contour with a string of small lamps.
is made of this connecting route
This is not three-dimensional illumina-
between the two parts of the city. The
tion. The structure of this lift bridge
strong, robust form of the large-scale
is made clear by the outlining. The
construction is more than a match
passageway underneath does not
forthe uneven illumination, so it
appear to have any volume, but fits
does no harm.
into the structure like a drawing on
Lighting design Philips Lighting,
a plane surface.
Harry Hollands (the Netherlands)

and Rene van Ratingen (Germany)
Herengracht, Amsterdam. Uniform

illumination along a canalside wall
The fagade of the Konzerthaus, Gen-
made up of different house fronts.
darmenmarkt in Berlin, presents a
It is unavoidable that contrasts are
varied image of lighting from without
created by this uniform lighting and
and within, from in front to behind,
the differences between the architec-
from inside to outside. The sculpture
ture of the various houses. If the
in the foreground is lit so strongly
light shines out from inside the
in comparison to its plinth that it
building, a natural appearance is cre-
appears to be floating. The wall
ated; however, when the illumination
behind the foremost tympanum is
from outside lights up the interior,
illuminated too strongly, which
this creates a 'ghostly' effect. A
disturbs the balance, because the
degree of nuance for each house
eye is automatically drawn to the
front would be appropriate here.
brightest point in the field of vision.

The figures indicate the level of
luminance.
The careful illumination of the

BrandenburgerTor, Berlin, with some
luminance values. There is a difference between the top and the bottom
of the columns, caused by the floor
spotlights, which is acceptable here
because of the large distance. In the
side sections (to the left and right),
the luminaires in the ceiling are so
close to the wall that a contrast has
been created between the upper and
lower parts of the wall.
Lighting design Kardorff Ingenieure,
Berlin
64
65
66
1
Casa Mil^ by A. Gaudi, Barcelona.
The scene in the evening is very
similar to its daytime appearance.
At night, the facade is lit vîth a floodlight and the balconies catch light
from below, which can be seen in
the difference in luminances. The
recessed upper part is lit too brightly
in some parts and not brightly
enough in others. The figures indicate the level of luminance.
2
Dome des Invalides, Paris. A uniform
appearance has been created in the
central section because more light
falls on the top of the building than
on the bottom. There is some difference at the sides, but that does not
disturb the image of uniformity. The
figures indicate the level of luminance.
3
Passeig de Gracia, Barcelona. An
'unhappily' illuminated corner property. The short distance between the
lamps and the fagade means that
there is so much contrast in the illumination of the columns that distortion has occurred. The same applies
to the two dormers, which are 'floating' above the eaves. There is no
coherence within the building itself
or with the surroundings.
4
Palais de la Bourse, Lyons. Difference in volumes and construction
materials. The pale stone facade has
a warmer appearance than the dark
slate roof The use of different light
sources has created clear differentiation. Unfortunately, contrasts have
come about because of the excessive
amount of light. The difference in
colour is in itself an interesting idea
when it works as a whole. However,
the contrasts here mean that it falls
short of its goal.
67
The
umination
of Buildings
Even before the invention of artificial light, buildings vêre lit up at

night, as is illustrated by historical pictures. This usually happened
during festive events, with the light coming from candles, oil pots,
torches or gas flames. The advent of the light bulb offered wonderful
opportunities for enhancing special occasions through the illumination of buildings. Initially, light bulbs were used only to emphasise
the outlines of the buildings, and the architecture itself and its surroundings were not lit up. From the 1920s, buildings were mainly
illuminated for advertising purposes, a method that is still used - and
abused - to make people aware of the presence of information. Even
in those days, some people pointed out that it was important to install
illumination with sympathy for the aesthetics of the architecture,
whether the aim was to advertise or to draw attention to the splendour of the building. Since then, there have always been architects
who, when choosing the material for the facade of a building, have
kept in mind the way that their building is going to look after dark.
We have become accustomed to illuminated buildings. The phenomenon may be seen in many important city centres. The illumination and spotlighting of monuments, objects and other places
of interest is a fixed part of the urban scene; it livens things up. Illumination also helps people to find their bearings.
Designers of illuminations know that the architecture of every
building is different and so cannot be treated in the same way. Buildings are not theatrical scenery. Every building tells its own story and
the purpose of architecture can be expressed through good and wellconsidered illumination that does justice to the construction materials. If it's done well, the whole building can be brought into harmony
with the immediate environment. For this to happen, the illumination must be evenly distributed, without becoming boring. Although
some contrast is desirable - it's surprising, stimulating, it grabs the
attention - the illumination of the adjoining areas and objects must
not be overdone, but applied with skill and understanding. Balance
and harmony are connected with the volume of light and colour that
is aimed at a building or an object; with the direction, colour and the
colour rendering of the light source; and with the reflection and the
colour of the illuminated surface, such as wood, brick, glass, synthetic
sheets, and so on. All this affects what we perceive.
It is generally undesirable to use floodlights and place a building
completely in direct light. This draws all of the viewer's attention to one
object and the strong contrast means that the prospect of the immediate surroundings is lost. Also, placing the floodlights a long way
away inevitably flattens the whole image. Any three-dimensionality is
lost because of the lack of shadows. The coherence that is experienced
in daylight must also be present in the evening.
When illuminating a building, it is sometimes enough to high-
70
Illuminated house and tower. Munttoren, Amsterdam (1938)
Illuminated town hall, Rotterdam

(1913)
DeVolhardinginThe Hague (1928),

by Jan Buys (Buys and LiJrsen) is an
early design that could be referred to
as 'night architecture'. The building
was designed as an advertisement
for De Volharding, a cooperative
society. The use of glass blocks and
opal glass wall sections (now
replaced by synthetic sections with
the same effect) made it possible to
light up adverts on the front the
building from behind. The light shining out from inside the building was
a striking advertisement for the
client and for the architecture itself
This building, designed in the style
of NieuweZakelijkheid (New Objectivity), is also worth visiting during
the daytime. De Volharding has been
restored after a period of neglect.
4/5/6
Friedrichstadt-Passagen, BerlinMitte. This new city block consists of
one building with shops on the
ground floor and offices above. The
architects and lighting designers
came up with concepts for the day
and for the evening that would each
create a distinct image. The
entrances occupy two floors, which
stand out during the day because of
the difference in scale, whilst during
the evening they function as illuminated accents making up part of the
horizontal and vertical interplay of
lines in the total architectural concept. Behind the opal plates are
fluorescent tubes that can be
adjusted to give different amounts of
light. It is a decorative approach to
the fagade that does not say anything
about the architecture itself
Architects Ted Mushow, Pei Cobb
Freed and Partners
Lighting design Paul Maranz, Chicago
and Anton Hansen, Guust de Jong,
Wolfgang Kunkel, Philips Lighting,
Germany
The Illumination of Buildings
71
light a single element. Historical buildings often have a cornice or a

sculpted tympanum as the finishing feature of the facade, something
that you don't normally register during the daytime, but which lighting can draw attention to when it's dark. This illumination should not
be distracting, and such a detail must fit in with the surroundings in
a natural way. Whatever form of illumination is used, the character of
the architecture needs to remain intact. Deliberate effects such as the
projection of stripes, circles and the like onto the facade are taboo.
Discretion is needed when selecting which buildings to illuminate. Illumination can have a commercial significance, but it can also
be of social importance or interesting from a historical point of view.
It is not necessary to include every building in the illumination, just
as it is not necessary to light up every selected object in its entirety.
The city becomes attractive when light shines (in a natural way)
from within houses and buildings. Light shining out from the inside,
in combination with an illuminated exterior, is sometimes enough to
reveal a great deal about the architecture, certainly in a three-dimensional sense. Architecture is all about space. If it is visible, the space
behind the fagade forms the third dimension for the exterior design
features. Interior light becomes exterior light.
Some architects let their buildings function as 'bearers of light'.
For example, they choose to use glass blocks in combination with
lamps and light fittings in corridors, stairways and halls. If some of
that lighting remains on after office hours, it can give a good impression of the architecture. Sometimes this is even possible with just the
emergency lighting. An unusual window can be seen from outside
as a surprising feature when it is illuminated by artificial light from
the room behind.
In shopping centres, illuminated display windows can be an asset,
if they don't radiate too much light. The roll-down shutters that are
used to prevent vandalism have increased the sense of insecurity
because they don't allow any light through. It would represent an
improvement in public spaces if these shutters were somewhat
transparent and the light behind - however sparse it may be - could
make the display windows visible again.
In no way should the illumination have a disturbing effect on the
surroundings or strike any false notes. A relationship with public
street lighting must be strived for, so that a balanced composition of
the total light can be achieved. This is not simple, because much of
the night-time appearance of an area is determined by random circumstances that cannot be controlled or organised. When public
lighting and illuminated buildings and objects are brought into line
with each other, a relationship between streets, roads and squares
72
1
Opera, Budapest. Unity between the
illumination and the lamps on and in
front of the building. The illumination
and spotlights permit a fine view of
the architecture, the porches, the
loggias and the staggered structure
of the building and the roof
The Agnelli Art Gallery in Turin, by

Renzo Piano, is a free standing building with striking architecture. The
lighting comes from within and from
the surface of the building itself The
roof construction is illuminated by
floodlights that are distributed
at intervals over the closed vertical
surfaces. The underside of the roof
structure is illuminated from the top
of the ground floor. With the light
coming from the rooms, it all forms
one composition.
Lighting design Piero Castiglioni
TheSintjanskathedraal in 's-Hertogenbosch and its interior and exterior

lighting. At street level, the light
inside the building shows the windows
in all their glory. The illumination in
the 'pepper pots' of the tower is the
crowning feature of a large-scale
building that is situated in a city
centre and so cannot be seen in its
entirety from close up.
Lighting design LITE - Christa van
The high standpoint makes it possible

to show the plasticity and coherence
of the illumination of the Koopmansbeurs, Amsterdam (H.P. Berlage,
1903). The long facade on the Damrak is not illuminated, because it
receives sufficient light from its surroundings. The entrances have their
own luminaires and are marked by a
wall lamp. Attention has been paid
to the third dimension in order to
emphasise the plasticity of the solidlooking building. There is light in the
louvred openings, the loggia and the
atrium. The short sides of the building are gently illuminated. During
exhibitions, light comes out of the
large hall of the building.
Lighting design LITE - Christa van
The exterior walls of the II Fiore office

complex in Maastricht are almost
invisible at night. The lighting transforms the interior, with its differently
furnished showrooms, into the exterior. The companies ultimately want
to have a presence that is also visible
from outside.
Architect Herman Hertzberger,
Amsterdam
73
can develop and have a positive effect on the continuity within the
tov^n. There are examples where the two kinds of lighting form a
harmonic whole.
The optimal effect is achieved when a total design for an area, a
so-called master plan, is drawn up, in which public lighting and illumination can be tuned to each other in a creative manner. In such
instances, the 'upper limit' of the light levels must be controlled more
strictly than has previously been the case. One illumination should
not be allowed to overwhelm another. It is possible to imagine situations where there is more street lighting when the building illuminations are not switched on, and vice versa. It should be remarked
here that illumination cannot replace public lighting. The relationship between the two must be assessed on an individual basis.
It is of course a challenge to install and distribute the different
types of light so that the city also has a story to tell at night, about its
structure, about its construction, about its most important places.
Artificial light must be manipulated. Expertise in the field of lighting is vital if you want to put together an aesthetically responsible
illumination programme. Suppliers of light fittings are often seen as
lighting specialists. This is usually incorrect. It is the lighting designer who has a vision of the connection between the illumination and
the continuity of the exterior design features. Using a few general
principles as a sort of manual is not sufficient; every situation is
unique and makes it own demands. There are always several possible solutions. The result is a choice.
We only need a little light to see each other, at least when all the
light sources are in harmony. It is often possible to do more with less
light - more light is not always better, particularly when it increases
contrasts. And illumination is not necessary everywhere; after all,
the idea is that we should still be able to see the stars in the sky.
74
1
Castel Sant'Angelo, Rome. An interesting ensemble: the castle with the
bridge and its reflection in the water.
The form and composition are supported by the consistent nature of
the lighting and the colour.
2/3
The facade of the Sully wing is displayed at its best. It is one of the
fagades of the Louvre in Paris that
are illuminated by lights incorporated into the front of the building.
The three-dimensionality of the
whole is maintained. This makes a
peaceful impression, which corresponds most closely to its daylight
appearance. The fact that some of
the illumination has stopped working is a defect that immediately
attracts attention.
Lighting design E D F (Electricity de
France)
4
The restoration project for Somerset
House, London, is apparently
straightforward. A closer look draws
our attention to the diversity: the
loggia on the first and second floors,
the illumination of the tympanum
and the dome. The over-illumination
means that the tympanum practically disappears, which disturbs the
image.
Lighting design Phoenix Large/lightmatters.
5/6
The illumination of Casa Mil4, Barcelona (architect: A. Gaudi), is a design
with no pretensions. The consistent
lighting does justice to the architecture, which is more or less in line
with its daytime appearance. The
incidental light from the building is
an addition. The receding rooftop
unit can clearly be seen, but stands
out because of its irregularity.
7/8
The Konzerthaus on the Gendarmenmarkt in Berlin during the daytime.
Only the front fagade is lit at night,
which means that the rest becomes
invisible. The porch behind the pillars of the entrance is illuminated
and the recessed part with the tympanum is also lit, which makes the
depth visible. The excess of light
makes the tympanum above the pillars disappear.
Page 76/77
Paris at night. The monuments are
like diamonds sprinkled over the city.
From this position the Eiffel tower
and the Hotel des Invalides can be
seen.
75
76
77
Summary
The points of a building that deserve attention, the characteristic

features of the architecture, must be illuminated.
The totality must be preserved; no distraction should be caused by
the illumination of details.
Three-dimensionality (including protruding and recessed elements)
may be accentuated (this depends on the shadov^s; looking in the same
direction as the beam of light results in an absence of shadows).
Architecture is space and mass, so not only the fagade should be
illuminated, but the depth should also be accentuated.
If a building is sufficiently transparent during the daytime, then it
should also be the same at night. A controlled amount of artificial
light is .necessary for this.
In general, the lighting of buildings must be moderate, or the relationship with the environment is disturbed.
Lighting up many details makes information unclear and impossible to 'decode'.
If the use of different coloured lights is overdone, the lighting effect
itself becomes the aim, instead of the accentuation of the architecture.
The addition of decorative patterns such as lines, spots or dashes
is not appropriate in an architectural context.
If possible, light fittings need to be installed where they can't be seen;
the operation of the light should never be distracting.
Construction materials are only shown to their best advantage when
the light source optimises their colour (such as brick, concrete, wood,
metal) through good colour rendering.
The illumination of white material offers a great deal of possibilities.
78
1/2
D6medes Invalides, Paris. Many
monuments in Paris have a dome.
During the daytime they resemble
each other, but at night the differences are discernable.
The method of lighting the dome
and the light at the top make this
very well-known monument recognisable from afar at night. The
entrance, standing outside of the
illumination, disturbs the otherwise
harmonious image.
3/4
During the daytime, the Pantheon in
Paris fits into the scene as far as its
scale and colour are concerned. At
night, the consistent, soft lighting
ensures that the building, including
the dome, presents an image of
unity.
5/6
College de France, Conseil d'Etat,
Paris. The illuminated dome has
been treated like a 'lid' on the building. Some elements are missing
from the illumination of the left
wing. This illustrates that maintenance is necessary if the desired
image is to be preserved.
79
1/2
The imposing architecture of the Vittorio Emanueie II monument in
Rome also makes its presence very
much felt at night. Closer observation reveals that the abundance and
the unevenness of the lighting has
led to contrasts. The idea of creating
difference in the three-dimensional
effect is in itself a sound principle.
Unfortunately, this effect has to a
certain extent been lost.
3
One of the fountains of the Vittorio
Emanueie II monument on Piazza
Venezia, Rome. The reflection of the
surface of the v\/ater on the underside
of the basin and on the rear wall is
caused by the lights in the water
basin. With its combination of light
and water, this is a place that stimulates the imagination.
4
At close quarters, it can be seen how
large the contrasts are in the
entrance porch, with shadows and
inconsistent lighting. The tympanum
is lost because of the contrast
between the porch and the tower.
5
The Neue Wache is one of the many
edifices in Berlin designed by the
important architect Karl Friedrich
Schinkel (1781-1841). The building is
now a memorial to the victims of the
First and Second World Wars. All the
illumination is directed at the meaning of the interior space, where there
is a statue by Kathe Kollwitz. The different colours and light levels
achieve an atmosphere that is appropriate for this monument.
Lighting design LichtKunstLicht,
Bonn.
6/7
The Franzosischer Dom on the Gendarmenmarkt in Berlin. Of the whole
complex, only the entrance porch
and the tower are illuminated, along
with limited illumination of the
dome. Directing the same lighting
onto different-coloured construction
materials has created a contrast. The
atmosphere of the square (at street
level) is not affected by this contrast.
80
8i
82
1/2
The large-scale church facade of the
Basilica di San Giovanni in Laterano,
Rome, is in the first instance seen
from a distance. The two lamps in
the foreground are so dazzling that
the facade appears not to be illuminated. However, a closer look shows
that it is in fact lit up, although only
gently. In contrast, there is a lot of
light in the gallery on the first floor,
which makes the unlit ground floor
appear incongruous.
3/4
In the large basilica of Santa Maria
Maggiore, Rome, the illumination of
the entrance porch and the rich
mosaic in the loggia offers a
response to the architecture of the
double facade. The frontage fits in
with the line of buildings. The tower
does not contribute to the night-time
scene.
Part of the Lateran Basilica. This is

also gently illuminated, with light in
the gallery upstairs and on the
ground floor. The wall-lights have the
unintentional effect of creating
atmospheric surroundings at eye
level.
6/7
The Arch ofConstantine (312) in
Rome stands like a museum piece in
its surroundings. It is one of the
remains from the past, as underlined
by the illumination. The unity is not
disturbed by the shadows of the
reliefs. On the contrary, this makes
them easier to see.
8/9
The triumphal arch for the World
Exhibition in Barcelona (i888), a
large-scale red-brick structure, functions as a gateway between the city
and the park. A striking feature is
that the plasticity of the arch is
clearer at night than during the day.
The columns look their best at that
time.
83
84
1/2/3/4/5
The BrandenburgerTor has become
the symbol of the reunification of
Germany. This building by Carl Langhaus was built completely in sandstone in 1791 and was restored in
2002. One side of the gate was
designed to face the country; the
other faces the city. The city side
(Pariser Platz) has been incorporated into a development around a
square; on the other side it is clearly
an entrance gate to the city. Both
sides of the structure radiate a great
sense of harmony at night. The light
makes the dimensions visible. The
three-dimensionality of the building
and the colour of the sandstone have
been taken into account during the
illumination. The quadriga on the
top is lit in such a way that no disruptive shadows are visible.
All the illumination has been
installed directly on or near the
structure, with the exception of two
lampposts on both sides of the gate
on the country side. Because the
original construction meant that the
light fittings in the structures to the
left and right of the gate were to
close on the walls, the upper sides of
these are illuminated too brightly.
In the open interior space of the gate
buildings on the country side, the
original pendant fitting have been
retained and adapted. This emphasises the sense of scale and the
elegance.
The columns of the gate are only partially lit by ground-level recessed
spotlights, which emphasises the
fact that the columns are clearly
standing on the ground.
Lighting design Kardorff Ingenieure,
Berlin
A master plan for the illumination
from the Brandenburger Tor to the
Schlossbrucke was the aim of a contest organised by the city developers
in Berlin. The winning design came
from Kardorff Ingenieure lightdesign
office, who, in addition to the plan
for the street lightingof Unter den
Linden, also did the illumination for
the BrandenburgerTor, the H u m boldt Universitat and the Deutsche
Staatsoper. The lighting of the
remaining buildings was carried out
by various lighting designers, following the principles of the master plan.
This is a successful example of the
integration of public lighting and the
illumination of buildings.
85
86
1/2
The Reichstag, Berlin, the symbol of
popular representation in the new
Germany. The glass dome, with
which architect Norman Foster
opened up the Reichstag, is visible at
night because of its illumination. The
light streams out of the large assembly room into the hall and the dome.
The facades to the left and the right
are illuminated from close up.
Lighting design Claude Engle, Chevy
Chase a.o.
3
The banks of the Rhine in Cologne
with the cathedral and Groi^ St.
Martin. The cathedral stands out
because of its detailed, cool illumination (4200K). The cool impression is
the result of the material, sand-lime
brick, and the colour of the light. In
spite of the fact that every detail is
illuminated, the building as a whole
still remains intact. The contrast with
the warm illumination of Gro St.
Martin creates a striking impression.
Lighting design Ren^van Ratingen,
Philips Lighting, Germany, with
Gerhard Kleiker, C E W Cologne.
4/5
From Place Bellecour, a large rectangular piazza, the Basilique de Fourvi^re can be seen on a hill in old
Lyons. During the day the church
stands against the background of a
green hill. At night the church is
over-illuminated, so it seems to float
in the air. It draws all the attention
towards it.
Lighting design Arch itectu re
Lumi^re, Lyons
^7
1/2
During the daytime, Gaudi's fairytale
Casa Battio is part of the row of
fagades along the Passeig de Gracia,
Barcelona. At night, the filigree
facade stands out because of the
over-illumination of details, the
floodlighting and the inconsistent
reflection from the differently coloured tiles of the facade. It becomes
almost unrecognisable.
3/4
Commercial illumination in various
shades of light on the Place du Luxembourg, Rue de Rivoli in Paris. The
excess light blocks out the illumination of the gallery on the ground
floor, in spite of the shop lighting. To
prevent too much light in the hotel
rooms, itvâs decided to illuminate
the piers. The amount and colour of
light have turned the buildings into
pieces of scenery, in contrast to the
gently illuminated building in the
background.
5
This office building on Domkloster,
Cologne, with shops on the ground
floor, was built in 1952 for 4711
(Eau de Cologne). The decorative
illumination, not intended as an
addition but as part of the design of
the facade, is a surprising feature,
as is its colour.
Architect Wilhelm Koep
88
89
Case Studies
BrandenburgerTor, Berlin
Somerset House, London
Cathedral Basilica of Sint-Jan,
's-Hertogenbosch
Colosseum, Rome
Ostend
Bridges
Use of Colour
BrandenburgerTor, Berlin
The Brandenburger Tor, or Brandenburg Gate, which until the Wall
The lighting plan is conservative and elegant and makes it easier
came down was situated on the border between East and West Ber-
to recognise the features of the square. Important characteristics of
lin, was thoroughly restored between 2000 and 2002. The front of
the plan are:
this historic gate dating back to 1788 is on Pariser Platz and the rear
the depth of the gate is made visible;
side is on the edge of the Tiergarten city park. It is a symmetrical
the colour of the light is uniform, which ensures that the sand-
complex that serves as a passageway and forms a spatial unit with
stone of the gate is displayed at its best advantage and that the com-
the adjoining buildings on Pariser Platz. This square runs into
plex is perceived as a whole;
Unter den Linden, with its famous buildings such as the Humboldt
the use of existing luminaire positions to avoid damaging the
University, the Neue Wache, the Staatsoper and a number of embas-
monument.
sies. A competition was organised for the allocation of the contract

to illuminate the Brandenburger Tor, with Kardorff Ingenieure
The illumination of the Brandenburger Tor can be seen from many
Lichtplanung winning the contract to develop the proposed lighting
angles. The lighting is subdued; there are no banks of lights set up
plan into a master plan for the whole area.
at a distance. Nearly all of the 250 luminaires are built into, or fixed
92
closely to, the building, with the exception of the lights mounted on
are all metal halide (HIT with ceramic burner) with a warm colour
two posts on the Tiergarten side of the gate.
because of the colour rendering of the pale-beige sandstone. A cool
There is a difference in the lighting of the front and the back of
version was selected for the quadriga.
the monument. The quadriga faces Pariser Platz and is illuminated
It is usual for a mock-up to be made for a lighting design, so that
in a sophisticated and professional way, with lights that are situated
the positioning of lights can still be changed or more or less light
under and alongside the horses and inside the chariot. From street
can be used. The restoration of the gate meant that this was not pos-
level, nothing can be seen of these luminaires. Seen from the Tier-
sible in this case, so a 3D model was developed, which accurately
garten, the quadriga is dark, and the sculpture is only visible as a
portrayed the proposed plan. The light from each luminaire was
silhouette. The passageways through and the interior spaces of the
simulated to assess the combined effect of the different light posi-
three-part gateway can be clearly seen at night. The lighting as a
tions. When the plan was implemented, the simulation model
whole has been brought into equilibrium: the floodlighting of the
proved to be in line with the actual situation, so no adjustments
columns, the illumination of the walls in the main passageway and
were required.
the archways and the lighting of the architrave.

The line of lighting around the top of the gate at the front and
the back consists of 35w/m fluorescent tubes. The other light sources
Case Studies
Lighting design Kardorff Ingenieure Lichtplanung, Berlin

Photo Linus Lintner
93
Somerset House, London

Somerset House in London, built (1776-1801) by William Cham-
was applied to each elevation with an added layer of lighting to high-
bers and recently completely restored, houses various museum col-
light architectural details at a higher brightness level. For the River
lections, as well as a restaurant and a cafe with a terrace. The lighting
Terrace on the Thames side of the building, the existing lighting
plan for the complex was designed by the London firm Lightmatters.
was retained. The fountain design for the courtyard has been imple-
The main aim of the design was to recreate the historical lighting
mented.
that was discovered in paintings and prints of the period and in
The U-shaped courtyard of Somerset House is very suitable as a
accounts of the construction. Many original fittings were refur-
backdrop for concerts, operas and other events. One of the require-
bished or remade. In addition to this, architectural wash lighting
ments was that the lights should not be visible. It was possible to
94
conceal the various lights by using the wall opposite the exposed
optical fibres, supported by projectors built into floor wells with
basement. The basement has the height of a full storey and the
a 150 w HQi light source. The spouting of the water jets and the chang-
lights that are attached on the opposite inner wall are positioned at
ing of the colours are synchronised and have no regular repetition.
such a height that they do not cause any disruption.
The illumination of the facades and the fountains is a complete sur-
A great deal of attention was paid to the fountains and their col-
prise for anyone looking through the gate on the Strand into the
oured lighting. The fountains had to form a unit with the u-shaped
courtyard. The fountains add to the feeling of a secret oasis of calm
rear wall. In the floor of the courtyard, laid out in a rectangular pat-
within the hustle and bustle of London.
tern, there are 55 computer-controlled spouts, at a distance of three

metres from each other, with jets of water varying in height from
Lighting design Lightmatters, London
0.5 to 5 metres. The illumination of the fountains is done with glass
Graham Phoenix/Sharon Stammers
Case Studies
95
Cathedral Basilica of Sint-Jan, 's-Hertogenbosch

The cathedral is the central point of this lively provincial Dutch city.
optimising the profile of the building so that it could be recog-
The residents of 's-Hertogenbosch are very involved vîth 'their'
nised from a considerable distance.
Sint-Jan. Any changes are viewed critically. This lighting design was
The architecture of Sint-Jan is complex, with different atmospheres
based on a conservative approach to the building, which took into
created by the different periods of construction. The complexity of
account its usage and position.
the exterior required illumination that would reinforce this unity,
The lighting design was based on the following principles:
whilst retaining the different atmospheres. The length and height of
reinforcing the unity of this complex building;
the cathedral had to remain visible at night, as did references to the
retaining the sense of intimacy that comes from its location in the
interior, such as windows.
old town centre;
The illumination of the central nave makes the height of the
making it possible to enjoy both the interior and the exterior of the
church visible from outside. The perception of the architecture as a
church;
whole is supported by the illumination of the windows of the side
96
aisles and the illumination of the choir aisle from within, which was
ing for visitors and people coming to pray. At night, two simple
done by adapting the existing luminaires. An absence of luminaires
lamps mounted on the fence are the only points of interest at ground
in the transept meant that its windows had to be directly lit with
level.
floodlights, which were installed as unobtrusively as possible.
The illumination from outside consists of 62 lights with a metal-
When you are approaching 's-Hertogenbosch, you can see the
halide light source (HIT warm white). In the choir, there are five
outline of Sint-Jan and its towers, an important symbol of the city.
lights of 150 w; the side aisles have 46 lights of 250 w; and the tower
The west tower, although maybe not the most interesting part from
has II lights of 400 w.
an architectural point of view, requires particular attention and now

has external illumination on all sides. The spaces in the spire are lit
Lighting design LITE, Amsterdam
from inside, as are the five 'pepper pots' of the central tower.
Christavan Santen/ir A.J. Hansen
The usual entrance is on the western side under the tower,

which has been the property of the town council since time immemorial. This entrance has an informal character and is very welcom-
Case Studies
97
Colosseum, Rome
The official name of the Colosseum in Rome is the Amphitheatrum
light may be added for special events: 32 HPI-T 2000 Watt (4700
Flavium. This enormous oval construction had eighty entrances and
lamps in an Olimpia 3 luminaire from Schreder. Seen from below,
could accommodate 50,000 people from all walks of life. Part of the
these narrow beams come from the third row of arches.
K)
Colosseum, which was inaugurated in AD 80, has been preserved.
In the background, the warm light of high-pressure sodium from
Together with the Arch of Constantine (in the background) and the
an earlier illumination plan can be seen. The combination of these
Forum Romanum, it makes a trip to this part of Rome most enjoyable
two types of light makes the building stand out and reinforces its
both during the daytime and in the evening.
character.
The 'white' light under the arches and along the highest section,
with its travertine marble cladding, comes from metal-halide lamps
Lighting design Remo Guerrini, Stefano Santia,
(3000 K). In total, 140 CDM-T35 Watt and 67 CDM-T70 Watt Schreder
Daniele Cicco (ACEA Spa, Rome)
Corus spots have been used, all emitting light asymmetrically. Extra
98
Case Studies
99
Ostend
Increasing tourism frequently results in the improvement and beau-
the upright wall of the promenade are used for the illumination of
tification of places that receive a lot of visitors. Ostend, often referred
the sand. The combined reach of this light is comparable with that
to as Queen as the Bathing Resorts and one of the fev^ large tov^ns
of the old streetlamps in the section that has not yet been redone.
on the North Sea, has long been a popular destination, with its sea-
Three types of light have been necessary in the new design to
vâll, the boulevards and the harbour area. The Albert i Promenade
match the amount of light provided by the old streetlamps: lights on
from the Casino to the Venetian and Royal Galleries, v^here the
the apartments for illuminating the boulevard, lights on the upright
Thermae Palace Hotel is situated, and the seavâll in the Mariakerke
wall of the promenade to illuminate the beach and light pipes running
area of tov^n have nov^ been redesigned. As part of this redesign, the
along the length of the boulevard/promenade. The decorative sur-
illumination has also been renovated. The first part, as far as the gal-
rounds with the inbuilt blue lights are no more than an additional
leries, was completed in 1998, followed by the harbour area, with
feature, but it must be said that the new design creates a livelier
the next step being the section from the pier to the Casino. In the
atmosphere than the tall concrete lampposts, which give good visib-
section that has not yet been modernised according to the new design,
ility, but illuminate the area in a comparatively unexciting way.
there is a single row of concrete posts that have two arms with luminaires giving off evenly distributed hght from a height of 12-14
The positions of the illumination devices are given to scale in

the two blue cross-section sketches.
metres. This provides sufficient light in the pedestrian zone, the
The lighting plan for the whole of the seawall including the har-
neighbouring buildings are lit up to the third storey and much of
bour area is by Atelier Roland Jeol (Lyons, France), in collaboration
the beach can be seen. With the waves in the background, this makes
with Filip }.M. Vanhaverbeke, process and project director for the
the beach an inviting place to visit even in the evening.
modernisation of Ostend.
The design for the section that has already been completed consists of a carefully constructed series of round and straight wall sections with a row of four-metre-high light pipes running down the
middle (Vigo design by Hess with a 70W metal-halide lamp). Blue
compact-fluorescent ground spots, which do not attract any attention in daylight, have been installed in the edges of the stone surrounds. The streetlamps, together with the lights positioned high
up on the facades of the apartments, which have asymmetric optics
and a 400W high-pressure sodium lamp, provide sufficient illumination to light the way and to allow people to see each other clearly on
the promenade. Floodlights with a 150W metal-halide lamp fixed on
TOO
Case Studies
101
102
Case Studies
103
Bridges
Bridges are functional constructions made of stone, brick, concrete or

metal, sometimes constructed entirely of wood or of a combination
of materials that gives character to the design. City bridges provide
routes over rivers and canals, over railvây yards and valleys, often
serving as points of orientation for people in the surrounding areas.
In the evening and at night, street lighting is generally used to guide
pedestrians and other traffic over the bridge. In cases v^here the bridge
goes over water, shipping traffic always needs to be taken into account
in the plans for illumination. Glare may be not caused, at quite a
distance from the bridge and the routes underneath the bridge must
be easily visible. Illumination plays a role in two directions: over the
bridge and underneath it. Design and illumination can work against
each other. City residents can see for themselves that there are different opinions on this subject.
Below is a selection of some types of bridges that are used
(mainly) by pedestrians.
The bridges over the Seine in Paris form an important element of
the City of Light, as Paris is often called. A master plan based on a
number of interesting principles has been formulated for the bridges
over the Seine. The categories are:
stone bridges: the material and details are accentuated by the light;
iron bridges: the structure is made visible by light v^th a cool colour;
historic bridges: the light serves to emphasise historic and cultural
aspects;
central bridges (links between riverbanks at important points): these
have more illumination than the other bridges, both on their surface
and on the details.
104
Pont Neuf, Paris

The Pont Neuf in Paris, the oldest bridge
line of xenon lamps. The arches are lit by the
on the banks. The lampposts for public
over the Seine, is illuminated by compact
3000 K fluorescent tubes positioned at the
street lighting that vêre later added to the
fluorescence, fluorescent tubes and a line of
top of the pilasters.
bridge constitute part of its architecture
xenon lamps. The details and the surface of
All of the light sources are covered by a
during the daytime. In the evening and at
the bridge are illuminated by compact-fluor-
screen (in the same colour as the stones of
night, the lampposts blend into the sur-
escent lighting with a colour temperature of
the bridge), so that there is no dazzle to dis-
roundings and are no longer noticed.
2700 K. The balustrades are illuminated by a
turb the traffic on the river or the pedestrians
Case Studies
105
Amsterdam
In Amsterdam, the arches of the bridges are
simply accentuated by a circular row of bulbs
of 7.5 w and 30 v that operate on undervoltage,
housed in a specially designed vandal-resistant
cover. This lighting has nothing to do with
the third dimension of the bridge, with its
architecture and depth. It is a two-dimensional addition, which is seen by the many
tourists as characteristic of the city.
io6
Millennium Bridge, London

The Millennium Bridge over the Thames in
designers was to allow as unobstructed
evenly distributed light source with no visible
London links the City (St Paul's Cathedral)
a view as possible over the river in all direc-
lamps. This is a good solution for a bridge
with Tate Modern. The competition for the
tions. The light marks out the breadth of the
that moves.
design of the bridge was won by architect
walkway and runs the length of the bridge.
Norman Foster and sculptor Anthony Caro.
The low positioning of the light means the
The public reacted so enthusiastically to this
It is a pedestrian bridge, 320 metres in
view is undisturbed.
new bridge that the construction was seriously
length, an apparently simple aluminium
The illumination is created by the spots
put to the test by the masses of visitors.
construction with a four-metre-wide walk-
fitted into the dark sections of the bridge.
Further work was undertaken on the bridge
way. The railings, balustrades and louvres
These light up the reflective material on the
for safety reasons and the official opening
are made of rustproof steel. The aim of the
inner side of the tubes, turning them into an
took place in 2002.
Case Studies
107
Hoge Brug, Maastricht

The Hoge Brug in Maastricht, a bridge for
providing sufficient light for the pedestrian
view over the Maas is unimpeded, as the
pedestrians and cydists, Hnks the new dis-
and cycle paths. A nice detail is the fact that
bridge is around ten metres above the water
trict of Ceramique with the old town centre.
the light can be seen on the outer sides of
when the river is at its normal level. The
This bridge over the Maas is 164 metres long
both railings through small round openings
bridge is used a lot in the evening as well.
and around 7 metres wide. Compact
by the light source. The bridge can be
fluorescent lamps have been discreetly fitted
reached from either riverbank by a lift or by a
Bridge design architect Rene Greisch,
into the railings on either side of the bridge,
long, low flight of so-called 'lazy' stairs. The
Bureau d'etudes Greisch, Liege, Belgium
io8
Case Studies
109
Use of Colour
The use of computer-controlled 'colour wheels' (colour filters) and
Excesses of coloured light will have to be ruled out or restricted
the constant advances in LED technology that allow all sorts of differ-
in the long term, just as advertisements that give off too much white
ent shades to be created have produced many new possibilities for
or coloured light are now subject to regulation in many cities. The
programming coloured light. These possibilities are also accompan-
use of coloured light in the public space also demands special provi-
ied by challenges that are not limited only to advertising purposes.
sions as far as damage and maintenance are concerned.
The use of blue, red, green, yellow, etc. for the lighting and illumination of buildings in the public space is approaching levels that used
This penchant for colour, often prompted by commercial interests,
to be common only in advertisements. There is no objection in prin-
disturbs the neutrality and anonymity of the evening atmosphere.
ciple to the use of colour for temporary, festive, special events, nor is
Reputable designers have demonstrated sensitive use of the various
there in cases where a material is shown to its best advantage in a
options. Blue, for example, is a colour that clearly inspires people. It
particular light source. Sometimes, in unexciting environments such
is a colour of peace and calm; it gives a feeling of detachment and
as tunnels, the use of coloured lamps helps to create a sense of security.
depth, in contrast with the active colours of red and yellow. Design-
no
ers often refer to blue as a dreamy colour; it creates a certain cool-
for the city of Ostend, which is designed to draw additional attention
ness in the atmosphere.
to the buildings.
Some residential districts and areas by the water, such as harbours, are placed in a blue light. The user of the space only notices
It is not (as yet) particularly common for public buildings that are
that all the surroundings are illuminated with this colour when there
not theatres or other entertainment venues to be illuminated with
is a contrast with another colour (for example, with light coming
coloured light. The colourful combination of lights at the railway
from a window). A wealth of choice is always interesting, but the
station in Eindhoven makes the building look attractive. The colour
master is revealed by a sense for restraint.
of the clocks goes from green to blue, to red, then yellow and white.
Blue was selected for the canopy and this is reflected in the glass
The illuminated Venetian and Royal Galleries in Ostend form part
wall below. The view inside the building, where the relevant lights
of the lighting plan for the seawall. The bulk of the hotel section
are located, gives a very lively look to the station as a whole.
above the Thermae Palace Gallery is illuminated in blue. The blue

can easily be seen in this setting and the colour in itself generally
Lighting design Raymonde den Uyl, Freestyle, Eindhoven
does not cause any irritation. This lighting is part of the master plan
Case Studies
chapel, Nijmegen
This chapel in the centre of Nijmegen,
cycle of green, blue and purple light. The
making this old building a foreign body in
which dates from around 1431, is now used
ground spots that are responsible for creat-
its surroundings.
as a centre for meditation and cultural
ing the different colours are installed at the

base of the chapel. These changes in colour
Lighting design Marco de Boer Lighting,
regulated by a computer program, illumi-
nullify the sacred atmosphere of the original
Primo Exposures, Hillegom
nate the chapel walls with an alternating
chapel, and undermine the architecture itself.
events. Lights with coloured
112
LEDS, which
are
Case Studies
113
Light Pollution
Rapid developments in the field of new light sources are seen as

positive, yet at the same time we are sometimes overwhelmed by an
excess of hght. The increasing light efficiency of most lamps is recognised as a useful development, and there is now also a wider range of
uses for this technology. Unfortunately, however, we use the improved
light sources in a careless manner. Badly utilised lighting creates
annoyance. A consideration of professional use of the technology
would appear to be necessary.
The term 'light pollution' is used to describe an excess of light
and/or light that is not directed accurately.
An annoying excess of light occurs with:
greenhouses giving off light;
illuminated advertising and display windows;
over-illuminated buildings;
excessive road lighting;
sports lighting that extends over too large an area.
It has long been known that the grov^h of plants in greenhouses is
encouraged by the light of a nearby streetlamp. Bright, modern lights
in greenhouses on farms and in market gardens make the plants grow,
but can also be detrimental to the surroundings. Greenhouses are situated outside built-up areas and their Kghts often make them visible
from quite a distance. The nuisance created by this new method of
cultivation has led to an organised response. Certain requirements
have been stipulated following complaints about light pollution from
greenhouses. Damage to third parties can result in costs; because
money was involved, measures were introduced relatively quickly in
this area.
In nature, inappropriate light has an influence on the rhythm of
animals' lives; it may cause changes in behaviour, for example, with
animals being active for too long or too early in the morning. Excessive light also has an impact on scientific research: disrupting telescope observations, for example.
In an urban environment, there are situations that require the
introduction of standards for lighting, particularly for illuminated
advertising, display windows and buildings. These standards can also
relate to the safety or to the aesthetic aspect of the illumination. Excess
light creates a strong contrast with the surroundings. The excess of
light coming from the advertising hoarding, the display window or the
over-illuminated building makes the surroundings look even darker
than they actually are. Sometimes public street lighting can scarcely
compete with all the other lights.
The degree to which an advertising board causes a nuisance in
dark surroundings is determined by the following factors:
the luminance of the light source;
116
1
Light pollution is a waste of light,
causing annoyance for users of
public spaces and for residents in
the immediate surroundings.
Spotlights set into the ground are
not always used appropriately. On
this station square, they are not
directed at a specific object, so they
'prick' the eye unpleasantly. These
spotlights require a lot of careful
maintenance and are vulnerable to
vandals. Two of around thirty lights
are working; they don't seem to be
missed.
2
Badly adjusted or incorrectly selected
floodlights direct more light into the
sky than at the object. This is a waste
of light and disrupts the darkness.
3
The light sources in this street
lighting are reflected in the shiny
polished-granite floor surface. This
makes walking rather tricky because
of the apparent slipperiness and the
dazzle.
4
Incorrectly applied lighting to indicate the difference in height of steps.
Anyone climbing the stairs is dazzled.
The lighting does work when
descending the stairs.
5
Badly shielded lighting in the railings
of this bridge is a nuisance for anyone
crossing. From this position, you can
no longer see the water.
Light Pollution
ii7
the luminance of the surroundings;

the soHd angle from which the light source may be seen;
the position of the light source relative to the direction from which
the observer is looking, known as the 'position factor'.
It is interesting to note that changes in lighting (on-off-on-off) can be
thought a lot more annoying than continuous light and that coloured
light (from illuminated advertising) appears to be more of a nuisance
than the same level of white light.
The Commission Internationale de FEclairage (CIE; International
Commission on Illumination) has now established recommendations
and standards to regulate the excess of light at an international level.
Individual European countries are also dealing with the problem of
light in their own way and have introduced rules for this purpose.
To state just a few of these:
light emitted should be reduced, where necessary;
no public lighting should shine into houses, or the other way round;
glare should be avoided.
Further conditions are that the night sky should remain visible, as
should the natural surroundings.
Guidelines have been created for the design of advertising hoardings
with regard to the ratio between maximum and minimum luminance
values. In general, there are large contrasts on advertising hoardings,
for example, between the letters and the background. This has the
result that it is difficult, if not impossible, to determine the average
luminance. It was therefore decided that the recommendations
should indicate limits for the maximum luminance, depending on
the surroundings and the surface of the hoarding. These are limited
to dark surroundings, i.e. completely free of illumination, and surroundings that at least have normal public lighting. It appears that,
for example, a large hoarding with a particular maximum luminance
and a small hoarding with the same maximum luminance can have a
different effect, depending on the size and colour of the notice. A message can be in white on a black background or in black on white.
Numbers and calculations only begin to play a part when an illuminated advert stands out in dark surroundings, causing a nuisance
to local residents, motorists and other passers-by. In a light, busy
environment, size and luminance need to be kept in check.
Excessive light can be annoying in a number of ways. Local residents might be troubled by the light falling on their exterior walls or
windows from illuminated buildings, diffused light from floodlights
or an object within their field of vision that is too brightly lit. For
floodlights and objects that are too brightly lit, the limits relate to
brightness and to luminance. The eye adjusts and determines the
n8
1
Ataxi rank with so much unshielded,
low-positioned light dazzles the
drivers and drowns the surroundings.
2
A pathway across a courtyard in a
residential building. The walkway is
well lit, but the low-positioned,
unshielded fluorescent tubes dazzle
and block the view of the surroundings, also compromising safety.
3
Lights on a post directed at the surface of this rather narrow road dazzle
the road-users. Motorists find it
impossible to adjust because of the
short distance between the posts
and the speed of the cars.
4
A shopping arcade on two levels,
which both have an excess of visible
public lighting, advertising boards
and illuminated display windows, so
that you 'can no longer see the wood
for the trees'. This is an example of
an annoying excess of light.
Light Pollution
^^9
1
A house in a quiet residential area.
Excess of light and colour do not
do justice to the architecture. The
advertising board in the foreground
is too bright, making it a glowing
focal point for the whole area.
2
Commercial properties on a long
residential street alongside a park.
The illumination is incongruous and
dazzling. It makes the well-lit street
appear relatively dark.
3
There is a tendency to light all
properties in the same way. This
sometimes doesn't work, as is
demonstrated by the exaggerated
illumination of the white facade.
This facade receives unwarranted
attention, detracting from the other
illumination and disturbing the
neighbours.
4
Buildings lit from inside can help to
make the surroundings more attractive in the evening and at night. A
pleasant effect can be achieved when
the interior is made into the exterior.
In this large building, part of a hospital complex, only the badly shielded
lamps can be seen. This disrupts the
whole area, also making it appear
darker.
5
The advertising boards are high up,
so the extremely high luminances do
not actually disturb the pedestrian.
From a distance, though, it is clear
that the large surface area and the
high luminances make this spot too
much of an 'eye-catcher'. The contrasts are so great that the facade
behind can no longer be seen, unless
the lights are on inside the rooms.
The lowest board is the most unpleasant, with a value of 300 cd/m^.
120
tolerable amount, depending on the light in the surrounding area.

The following tables serve as a guideline for lighting designers.
Surrounding zone
Conditions
Parameters
El
E2
Natural area
Rural area
E3
Urban area
E4
City centre
2 lux
5 lux
TO lux
25 lux
1 lux
1 lux
2 lux
5 lux
2500 cd
7500 cd
loooocd
25 0 0 0 cd
ocd*
500 cd
looocd
2500 cd
industrial area
daytime to
illuminance
Ev on the
late evening
facade
07.00 - 23.00
Night
23.00-07.00
luminous
daytime to
intensity (cd)
late evening
ofeach
07.00-23.00
Night
luminaire
23.00 - 07.00
* The light source may not be visible.
Illuminance relates to the permitted amount of light that may fall

on a fagade (with windows).
Luminous intensity refers to the brightness of the light from a
floodlight or other light source that can enter the eye.
Surrounding zone
light-technical parameter
El
E2
E3
E4
average luminance, facade
ocd/m^
5 cd/m^
locd/m^
25 cd/m^
or object (Lavg)
The luminance values apply to a facade or other object that is visible

from the residence, for example an illuminated fagade opposite the
window.
material of the illuminated
maximum permissible average lluminance (lux'
surface
surrounding zone
El
E2
E3
E4
white stone
18
35
88
26
52
131
52
104
262
157
314
785
175
350
875
white marble
pale pastel colours
(reflectance: 0 . 9 )
lightly coloured stone
lightly coloured marble
pastel colours
(reflectance: 0.6)
coloured stone
cement
coloured marble
(reflectance: 0.3)
dark stone
grey granite
dark marble
(reflectance: 0.1)
aluminium
polished surfaces
(be aware of possible
reflection interference)
By way of illustration, these luminance limits are calculated in lux

values, linked to the reflectance of the various materials.
Light Pollution
121
Recommended luminances for the illumination of buildings can
Many lighting manufacturers have

realised that directing and limiting
vary widely, even in relation to the CIE guidelines. The figures stipul-
the light emitted can be important in
ated by this international committee are limits that should not be
avoiding light pollution. Better optics
exceeded. The values are different from those of public street light-
help a great deal. (Illustrations used
ing, where the important thing is that traffic should be visible. Illumination also involves avoiding annoyance to other people.
These values are high, when you realise that a dark facade in a
Hght environment has a value of 785 lux, according to the table (illuminance on the fagade). It seems inevitable that local residents and
users of the buildings opposite will experience annoyance. Even in
cases where there are no buildings opposite, there is still a waste of
energy.
It is doubtful whether dark facades even need to be illuminated
when they are in light surroundings. There are other ways to give them
special attention, for example by lighting them from within, with
well-chosen light sources and in moderation. In many cases, public
street lighting can be sufficient; illumination is then, of course,
superfluous.
For buildings in general, designers have their own opinions about
the use of too much or too little light and about the creation of contrast. With historical buildings in particular, the cohesion of the features of the architecture is important for the unity of the whole.
Complaints about light pollution have led manufacturers of
luminaires to look more carefully at the light emitted. Undesirable
light emission results in both an excess of brightness and a loss of
energy.
Technical ingenuity and the provision of rules must contribute
to the harmony and aesthetics of the street scene, which are necessary conditions for the quality of the living environment.
122
(reflectors) and good shielding can

by permission of iCuzzini)
The facade of the building is lit up,
Whenever possible, the light should
but some of the light is lost upwards.
be directed downwards. If this is not

possible, we recommend that light
refractors, screens and asymmetrical
optics be used as these aim the light
flow onto the surface of the building
and minimize the loss of light.
The light is aimed downwards, but
The use of asymmetrical optics
the lens is nevertheless losing some
enables a perfect illumination whilst
light upwards because of the excess-
avoiding the excessive angling of the
ive angle of the fitting.
other fixtures.
The diagram shows a fixture with a
Correct illumination requires the use
high degree of loss of light skywards:
of fixtures fitted with light refractors or
these are often used in pedestrian
reflecting louvres.
areas.
In street lighting, it is extremely
Light Pollution
The use of high-performance
important to use cut-off optics which
reflectors also provide energy-
reduce direct glare.
savings.
123
Maintenance
Street lighting, the illumination of buildings, the lighting of objects,
Underwater spots always have to be accessible for maintenance.
fountains and such like all require maintenance. It is unpleasant
The vegetation in the water means that the lights get dirty and the
when a section of the lighting stops working, particularly when street
amount of light is therefore reduced. The glass also needs to be
lighting is involved. A building that is only partially illuminated is
cleaned in such situations.
not a pretty sight. In such a case, it is preferable to switch off all of

the lighting.
Spotlights installed in the ground, which are mainly used for

the illumination of buildings and other objects, may be vulnerable
Maintenance includes replacing the light sources in good time
to damage in busy urban environments. Their horizontal position-
and keeping the reflectors (the interior of the luminaires) and the
ing allows dirt and dust to settle on them. The position of the lights
glass shades clean. The companies responsible for maintenance
also invites vandalism and means that they may be covered up,
have schedules for this work. The cleaning of the luminaires takes
intentionally or otherwise. This overheats the workings of the light
place when the lamps are changed. This obviously used to happen
and reduces its life expectancy. In pedestrian areas, the light can
more often than it does now. Lamps now last longer and this means
disturb passers-by.
that the intervals between cleaning are also longer; cleaning takes
Changing the light source in this sort of luminaire can be quite
place every three or four years. Only rarely - it's a question of finance
a tricky job, which needs to be done carefully. The luminaires have
- is cleaning carried out more frequently, for example at critical
an IP 65/67 protection factor, so if they are not handled properly,
points in the city, where replacement of the lamps takes place as
that usually means the end of the protection. Condensation can
quickly as possible. An incidental note on deficient maintenance:
occur and the mirror may become dirty.
dirt reduces the amount of light by 20-40% and that's a significant

amount.
Those who are responsible for the maintenance obviously take a
critical look at the design. Engineers and installers are often good
As well as the light source, the rest of the system is subject to

wear and tear. Electronics and wiring also have a limited life expectancy. The housing of lamps can, however, last for a long time, as is
demonstrated by old streetlamps.
sources of information. They hope that rain and wind will have a
Good maintenance is a precondition for the successful function-
chance to wash away some of the dirt and prevent the accumulation
ing of illumination and public street lighting. A lack of funds for
of dust. Designers of exterior luminaires are well aware of this, but
maintenance or insufficient attention from the responsible parties
cannot always accommodate such requests.
(council, contractors or special maintenance service) may result in
The light produced by most gas-discharge lamps reduces more
deficiencies.
quickly once they have reached their average life expectancy, but
they still keep working. Some more recently developed light sources
stop working at a point that is closer to the average life expectancy.
This development has resulted in a demand for systems that indicate when a light source has stopped working without requiring
individual observation. There are now systems that use a computer
program to report when and where a certain percentage of lights is
no longer working and needs to be replaced.
LEDS as street lighting and in floodlights are on the increase,
with an attractive life expectancy of around 20,000 hours and more.
When LEDS are nearing the end of their life, the whole luminaire is
replaced. The amount of light emitted is not yet sufficient for the
illumination of high walls and wide streets. Coming years will reveal
whether this will be a viable option for such situations.
Floodlights are used for the illumination of fountains and other
objects. They are treated in the same manner as public street lighting. The lighting of fountains is easier to maintain. When they are
not in operation, usually in the winter, the luminaires are removed,
cleaned and, if necessary, the lamps are changed.
125
cv
Christa van Santen is a visual artist and a lighting designer. Until
(J.H. De Bussy, Amsterdam 1985), Daglicht, kunstlicht: een lei-
1990 she lectured in Study of Forms and in Light in Architec-
draad (Delft University Press, Delft 1989), Zichtbaar maken van
ture atthefaculty of Architecture and Planning, Delft University
schaduwpatronen (Publicatieburo Bouwkunde, Delft 1989), Simu-
ofTechnology. Together vîth A.J. Hansen, she set up the lighting
leren van daglicht (Publicatieburo Bouv^kunde, Delft 1991). Van
consultancy LITE daglicht - kunstlicht, v^hich she continued after
Santen has also published articles in journals including Licht und
Hansen's retirement in 2001. She has co-v^ritten a number of

books about illumination with Hansen: Licht in de orchitectuur
126
Architektur.
Colophon
Author
This book has also been published in a German language edition
Christa van Santen, Amsterdam
(3764375213)-
Project coordination
Acipcatalogue record for this book is available from the Library
Astrid Vorstermans, Valiz, Amsterdam
of Congress, Washington D . C , USA

Bibliographic information published by Die Deutsche Bibliothek
Photography
Die Deutsche Bibliothek lists this publication in the Deutsche
Joke van Hengstum, 's-Hertogenbosch, except:
Nationalbibliografie;
p. 32-1: Emilio F. Simion (for iCuzzini, Recanati, Italy)
Detailed bibliographic data is available in the Internet at
p. 41-6: photo taken from International Lighting Rei^/ew^ 1994/4
http://dnb.ddb.de.
p. 52-1, 54-1, 2, 3, 55-4, 64-3, 65-5, 6, 71-4. 5. 72-3, 73-4. 75-7, 8,

81-5, 6, 7, 85-3, 4, 86-1, 2, 97 (right), 119-3, 5: Hans Kruse, Delft
This work is subject to copyright. All rights are reserved, whether
p. 72-1: Christa van Santen, Amsterdam
the whole or part of the material is concerned, specifically the
p. 72-2: Giuseppe Saluzzi (for iGuzzini, Recanati, Italy)
rights of translation, reprinting, re-use of illustrations, recitation,
p. 84-2, 93: Linus Lintner (for Kardorff, Berlin)
broadcasting, reproduction on microfilms or in other ways, and
p. 74-4, 94, 95 drawing/photographs: Lightmatters
storage in data banks. For any kind of use, permission of the
(Phoenix/Stammers, London)
copyright owner must be obtained.
p. 92: drawing Brandenburger Tor from
Licht/Architektur/
Technik 2/2003
2006 Birkhauser- Publishers for Architecture,
p. 105: taken from International Lighting Review 001
P.O. Box 133, CH-4010 Basel, Switzerland
'city beautification'
www.birkhauser.ch. Part of Springer Science-i-Business Media
p. 107: dravîngfrom Detail, December 1999
Printed on acid-free paper and produced from chlorine-free pulp.
Photographic
manipulation
Hans KriJse, Delft with Christa van Santen, Amsterdam
Printed in Germany
Editing
iSBN-i3:978 3 7643 7522 5
iSBN-10: 3 7643 75221

Els Brinkman, Astrid Vorstermans, Amsterdam
987654321
Translation fronn Dutch into English
Laura Watkinson, The Hague
Graphic design
Piet Gerards &. Maud van Rossum (bpc), Heerlen/Amsterdam
Lithography and printing
die Keure nv, Bruges
127

Light Zone PDF

Uploaded by

Copyright:

Available Formats

Light Zone PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Light Zone PDF

Uploaded by

Copyright:

Available Formats

Light Zone City

for Joke M.A. van Hengstum

Light Zone City

Birkhauser - Publishers for Architecture

Light Pollution 114

Light in the city is necessary for orientation. Lighting makes it pos-

rules have been devised so as to avoid an excess of such light.

A master plan for the lighting of a certain area is preferable to

spaces to see each other. The illumination of buildings, the lighting

surroundings into account. A good master plan is tailored to the

surroundings, providing it is done well.

individual character of the environment and creates coherence in

The use of the incandescent lamp in the public environment has

the nighttime appearance of the place. The city at night is different

panying luminaires has greatly increased our possibilities. Public

be imitated. The night can certainly be a little more 'mysterious' and

lighting nowadays comes in a number of varieties, all supplied with

have its own ambience. The architecture and town planning of a

cleverly designed optics. Yet sometimes it seems as though all exter-

location should serve as a guideline for a carefully designed lighting

buildings and even street lighting, has become a marketing tool.

illuminated in a way that shows understanding of the significance

Coloured light is used whether it is suitable or not. It is suitable when

a party atmosphere is required or where it plays a functional role with-

of illumination in the city. To illustrate this, a variety of locations in

different cities have been photographed and provided with a com-

when it makes the city resemble theatrical scenery. However charm-

mentary. These snapshots in time help to clarify the possibilities

and the limitations of illumination.

the attention to advertising or of accentuating decorative elements

Christa van Santen, February 2006

Quai de Crenelle, Paris. One element

The City as an Outside Interior

Light is present in the evening and during the daytime. In the

The City as an Outside Interior

The City as an Outside Interior

The City as an Outside Interior

The City as an Outside Interior

The City as an Outside Interior

The City as an Outside Interior

Visitors to European cities will experience most of them as a whole,

Beautification of the City

often enough - the involvement of designers with a good overall

Beautification of the City

Beautification of the City

Beautification of the City

Public lighting has a history beginning in the sixteenth century with

comfort and well-being;

lighting class M o t o r w a y Europe

lighting class Conflict (area) Europe

lighting class Slow (traffic)

lighting class E Semi-cylindrical (facial recognition)

Lighting classes CE and s apply in this context. The CE class relates

average horizontal illuminance;

The choice to use an s class depends on factors that include the

energy and generally increases the life of lamps and luminaires.

In recent years, indirect illumination, with a light shining upon

Daylight cannot be imitated; it simply is. The amount of daylight can

freestanding building or statue