A001en PDF
A001en PDF
A001en PDF
Steel Plates
http://www.nssmc.com/
Introduction
Increasingly higher functionality and quality are demanded for steel plates.
This is a reflection of technological progress in various application fields, as
well as diversification of usage environments.
Through our total control system and operational technology realized
through thorough quality control, excellent equipment, the technology we
have cultivated, and our vast experience, we at Nippon Steel & Sumitomo
Metal will continue to create products that accurately meet the demands of
any field, both qualitatively and quantitatively.
Under a new organizational system, we will work diligently every day as we
strive for quality and turnaround times that rank number one in the world.
CONTENTS
Features 2
Available Grades 4
Authorized Steel Grades by Product Type 6
Manufacturing Process and Quality Control Points 8
Plate Mill
Kashima Works
Kimitsu Works
Nagoya Works
Oita Works
Notice: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the readers risk and no warranty
is implied or expressed by Nippon Steel & Sumitomo Metal Corporation with respect to the use of the information contained herein. The information in this publication is subject to
change or modification without notice. Please contact the Nippon Steel & Sumitomo Metal Corporation office for the latest information.
Please refrain from unauthorized reproduction or copying of the contents of this publication.
The names of our products and services shown in this publication are trademarks or registered trademarks of Nippon Steel & Sumitomo Metal Corporation , affiliated companies, or
third parties granting rights to Nippon Steel & Sumitomo Metal Corporation or affiliated companies. Other product or service names shown may be trademarks or registered trademarks of their respective owners.
Features
2. Stable Quality
We use our excellent equipment and technology and vast experience to manufacture products
with stable quality under strict control throughout all process including pig iron manufacturing,
steel manufacturing, heating, rolling and cooling.
3. Flawless Surface
Using material (slabs) manufactured under a strict quality control system, we manufacture
steel plates with flawless surface by removing scales from the steel plates with high
pressure water jets during the rolling process.
In addition, in the transport and heat treatment, etc. of steel plates, manufacturing is
conducted using state-of-the-art equipment.
4. On-time Delivery
We strive for on-time delivery by making the most of the advantageous seaside location
of each steel mill and our control systems for each individual product under process control that effectively utilizes a computer system.
5. Precise Consulting
The engineering divisions at our head office and various branch offices can precisely
provide consulting on the quality characteristics, applications, and processing methods
of steel plates as well as technical cooperation during use, based on their vast experience
and comprehensive technical capabilities.
Available Grades
Our company manufactures thick steel plates that meet various standards. Products with Nippon Steel &
Sumitomo Metal standards are unique to our company. An excerpt of these standards is included in another
chapter. We also respond to requests involving standards other than those listed below.
Metal specifications
WEL-TENTM series
BT-HT series
BT-LYPTM series
NSFRTM series
FCA
TM
HIAREST
JIS specication
JIS G 3101Rolled Steel for
General Structures
SS330, 400, 490, 540
Medium-to-hightemperature steels
N-TUFTM series
ASTM A283
ASME SA283
DIN17100
ASTMA36, A440, A441, A529,
A572, A633, A709
ASMESA36, SA440, SA441,
SA529, SA572, SA633, SA709
BS4360, 7191
DIN17102
ISO630
EN10025
IS2062, 8500, 2002
AS3678
ASTMA537, A514, A517, A710,
A841
ASMESA537, SA514, SA517,
SA710, SA841
ISO4950/3
TM
Low-temperature
steels
Other Standards
ASTM A131
NK, LR, AB, BV, CR, GL, NV, KR
CCS, RS, RINA
JIS G 3103Carbon Steel Plate and Molybdenum Steel Plate for Boilers and Pressure
Vessels
SB410, 450, 480, 450M, 480M
JIS G 3119Manganese-Molybdenum Steel
Plate and Manganese-Molybdenum-Nickel
Steel Plate for Boilers and Pressure Vessels
SBV1A, 1B, 2, 3
JIS G 3120Manganese-Molybdenum Steel
Plate and Manganese-Molybdenum-Nickel
Alloy Steel Plate Quenched and Tempered
Pressure Vessels
SQV1A, 1B, 2A, 2B, 3A, 3B
JIS G 4109 Chrome-Molybdenum Steel
Plate for Boilers and Pressure Vessels
SCMV1, 2, 3, 4, 5, 6
Metal specifications
Intermediate
temperature steels
Atmospheric
corrosion
resistant steels
CORTENTM series
NAWTENTM series
JIS specication
Other Standards
ASTMA285, A455, A516, A537
ASMESA285, SA455, SA516,
SA537
BS1501
DIN17155
NF A36295
EN10028
Seawater
corrosion
resistant steels
MARILOYTM series
Sulfuric acid
resistant steels
STENTM series
Corrosion resistant
steel for crude oil
tankers
NSGPTM1
API 2H Gr.42, 50
API 2W Gr.50, 60
EN10225 S355, 420, 460
NORSOK Y20, Y30, Y40, Y50
SHELL GR345, 414, 552
Structural steel
materials for offshore
service
Abrasion resistant
steels
ABREXTM series
Electromagnetic
mild steels
NSMIPTM
Hot-dip galvanized
steel plates
NAGPTM
Ship register
Ship register
Nippon Kaiji KyokaiNK
Mild SteelA, B, D, E
Bureau VeritasBV
Japan
Welding
Engineering
Society
WES
Corresponding grade
Remarks
Old specications
HW355
WELTEN540
SUMITEN540
HW450
WELTEN590
SUMITEN590
WELTEN590EX
SUMITEN590F
HW490
WELTEN610
SUMITEN610
WELTEN610EX
SUMITEN610F
HW550
WELTEN690
SUMITEN690
HW685
WELTEN780
SUMITEN780
HW685
WELTEN780E
SUMITEN780S
HW885
WELTEN950
SUMITEN950
WES3005
for Boilers
Lloyd
s Register of ShippingLR
360AR, 410AR, 460AR, 360, 410, 460, 490, 360FG, 410FG, 460FG, 490FG
for Boilers
Society
NV22, NV42, NV23, NV43, NV24, NV24L, NV44, NV44L, 3.5Ni, 5Ni
is under qualiying.
American Bureau of ShippingAB V039, V051, V060, VH039, VH051, VH060, 9%Ni QT
API
2W Gr.50, Gr.60
EN10225
NORSOK
SHELL
CE Mark
Authorized standards
EN100252
Japan
Welding
Engineering
Society
WES
Corresponding grade
Old specications
LT285III80G30A
NTUF295NTUF295N
SLT285
LT325II70G30A, LT325IV50G25A
NTUF325
SLT325A
LT325III90G50A, LT325IV80G40A,
LT325VI70G30A
NTUF325
SLT325B
LT360II90G40A, LT360IV90G40A
NTUF365
SLT360
LT440VI105G80A
NTUF570
SLT3N440
LT450I80G60A, LT450II80G50A,
LT450III70G40A, LT450V60G20A
NTUF490
SUMITEN590LT
LT490I80G60A, LT490II80G50A,
LT490III70G40A, LT490V50G20A
NTUF490
EN100254
Others
Society
SUMITEN610LT
S355M, S355ML
Vereinigung der
Technishen berwachungs
VereinTV
Authorized standards
Corresponding grade
EN100252
S235JR S450J0
EN100282
P235GH X10CrMoVNb91
EN100283
P275NH P460NL2
EN100284
11MnNi53 X7Ni9
AD 2000Merkbltt
W1, W10
TRD
101
Iron ore
Sintering plant
Slab conditioning/
Dimensional inspection
Pigiron
Coal
Coking plant
Basic oxygen
furnace
Blast furnace
Continuous reheating
furnace
Roughing
mill
Finishing
mill
Hot leveling
machine
Continuous
casting
Controlled cooling
Secondary
refining
Shearing
(roughing cutting)
Cooling beds
Reheating
Quenching
Tempering
Shearing
(side cutting)
Cutting out
product plate
and test pieces
Product
inspection/
Marking
Shot blasting
Shipping
Ultrasonic
flaw detection
Inspection
(conditioning)
Coating
Shot blasting
Mechanical
testing
Controlled rolling
Controlled cooling
Scale
breaker
Roughing
mill
Finishing
mill
A collective name for all methods of manufacturing steel plates with controlled
rolling or controlled rolling combined with accelerated cooling.
For details on TMCP, please see the reference material (p.36 to 40)
Hot leveling
machine
Accelerated cooling
Tensile strengthN/mm2
Continuous reheating
furnace
Marking/
Final inspection
Drying
Extraction
of test
pieces
Normalizing
Product
shipping
center
700
ABS
DNV
LR
BV
Application examples
Shipbuilding: Tankers, cargo vessels, container ships, refrigerator vessels, etc.
Offshore structures: Jack-up rigs, semi-submersible rigs, crane barge, etc.
(2) BT-HT325, 355, 385, 400 and 500 for building structures
(3) It has been applied in a wide range of uses such as industrial machinery, line pipes, tanks, general uses and the like.
4. High-toughness, High-strength Steel Plates for
Low-temperature Applications
In response to user requests, TMCP is increasingly applied to the
manufacture of high-strength and high-toughness steel plates
for lower-temperature service applications (offshore structures,
jackets, offshore facilities, etc.)
TMCP
water cooling-type
600
500
400
0.20
0.30
Ceq
0.40
0.50
Standards
Specifications
ASTM
A841 (Steel Plates for Pressure Vessels), A844 (9% Ni Steel Plates)
JIS
EN
EN10025 (Structural Steel), EN10028 (Pressure Vessel Steel), EN10225 (Offshore structural steel)
API
Available Sizes
Standard size range
For sizes of over 25m in length, please consult us in advance.
Over
Width
(mm) 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000
to
to
Thickness
1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000 5200
(mm)
21.0 18.0
6
Over 6 7 or less
10
10
12
12
14
14
16
16
18
18
20
20
25.0
25.0
26.0
Width
(mm) 1000
to
Thickness
1200
(mm)
110 115 17.5
Over
1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000
to
1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000 5200
15.0 13.5 12.5 12.0 12.0 11.5 11.5 11.5 11.0
8.5
8.5
8.5
8.5
8.0
8.0
7.5
7.0
22.0 22.0
115 120 17.5 15.0 13.5 12.5 12.0 12.0 11.5 11.5 11.5 11.0
8.5
8.5
8.5
8.5
8.0
8.0
7.5
7.0
22.0 22.0
120 125 13.0 13.0 12.5 12.5 12.0 12.0 11.5 11.5 11.0 10.0
8.5
8.5
8.5
8.0
7.5
7.0
7.0
6.5
22.0 22.0
125 130 13.0 13.0 12.5 12.5 12.0 12.0 11.5 11.5 11.0 10.0
8.5
8.5
8.5
8.0
7.5
7.0
7.0
6.5
130 135
8.5
8.5
8.0
7.5
7.0
6.5
6.5
6.0
9.5
135 140
9.5
8.5
8.5
8.0
7.5
7.0
6.5
6.5
6.0
140 145
8.5
8.0
7.5
7.0
7.0
6.5
6.0
6.0
5.5
145 150
25.0 25.0
150 155
25.0 25.0
22
22
24
24
26
26
28
28
30
30
32
32
34
34
36
38
40
27.0
26.0
9.5
9.5
8.5
8.0
7.5
7.0
7.0
6.5
6.0
6.0
5.5
9.5
8.5
8.0
7.5
7.0
7.0
6.5
6.0
6.0
5.5
5.0
155 160
9.5
8.5
8.0
7.5
7.0
7.0
6.5
6.0
6.0
5.5
5.0
160 165
9.5
9.0
8.0
7.5
7.0
6.5
6.5
6.0
5.5
5.5
5.0
5.0
165 170
9.5
9.0
8.0
7.5
7.0
6.5
6.5
6.0
5.5
5.5
5.0
5.0
170 175
175 180
180 185
185 190
190 195
36
195 200
10.0
9.0
9.0
8.0
7.5
7.0
6.5
6.0
5.5
5.5
5.0
38
26.0 25.0 23.5 22.5 21.0 20.0 19.0 18.0 17.0 17.0
200 210
10.5
9.5
8.5
8.5
7.5
7.0
6.5
6.0
5.5
5.5
5.0
5.0
40
27.0 25.0 24.0 22.5 21.0 20.0 19.0 18.0 17.0 16.5 16.0
210 220
10.0
9.0
8.0
8.0
7.5
6.5
6.0
6.0
5.5
5.0
5.0
4.5
4.5
4.0
42
27.0 25.0 24.0 22.5 21.0 20.0 19.0 18.0 17.0 16.0 15.0 15.0
220 230
9.5
8.5
7.5
7.5
7.0
6.5
6.0
5.5
5.0
5.0
4.5
4.5
4.0
42
44
26.0 24.5 23.0 21.5 20.0 19.0 18.0 17.0 16.0 15.0 14.5 14.0
230 240
8.0
7.0
7.0
6.5
6.0
5.5
5.5
5.0
4.5
4.5
4.0
4.0
44
46
27.0 25.0 23.5 22.0 20.5 19.0 18.0 17.0 16.0 15.5 14.5 14.0 13.5
240 250
8.0
7.0
7.0
6.5
6.0
5.5
5.0
4.5
4.5
4.0
4.0
46
48
27.0 27.0 27.0 26.0 24.5 22.5 21.0 19.5 18.5 17.0 16.5 15.5 14.5 14.0 13.5 13.0
250 260
7.5
6.5
6.5
6.0
5.5
5.0
5.0
4.5
4.5
4.0
4.0
48
50
26.0 26.0 26.0 25.0 23.5 21.5 20.0 19.0 17.5 16.5 16.0 15.0 14.0 13.5 12.5 12.5
260 270
7.0
6.5
6.5
6.0
5.5
5.0
4.5
4.5
4.0
4.0
50
52
24.0 24.0 25.0 25.0 25.0 24.0 22.5 21.0 19.5 18.0 17.0 16.0 15.0 14.0 13.5 13.0 12.0 12.0
270 280
7.0
6.0
6.0
5.5
5.0
5.0
4.5
4.0
4.0
3.5
52
54
24.0 24.0 24.0 23.0 21.5 20.0 18.5 17.5 16.5 15.5 14.5 14.0 13.0 12.5 12.0 11.5
280 290
6.5
6.0
6.0
5.5
5.0
4.5
4.5
4.0
4.0
3.5
54
56
23.0 23.0 23.0 22.5 21.0 19.5 18.0 17.0 16.0 15.0 14.0 13.0 12.5 12.0 11.5 11.0
9.5
290 300
6.5
5.5
5.5
5.0
5.0
4.5
4.0
4.0
3.5
56
58
23.0 23.0 22.0 21.5 20.0 18.5 17.5 16.0 15.0 14.0 13.5 13.0 12.0 11.5 11.0 10.5
10.0 10.0
9.5
9.0
300 310
6.0
5.5
5.5
5.0
4.5
4.5
4.0
3.5
3.5
58
60
23.0 23.0 22.0 21.0 19.5 18.0 16.5 15.5 14.5 14.0 13.0 12.5 11.5 11.0 10.5 10.5
10.0
9.5
9.0
9.0
310 320
6.0
5.5
5.5
5.0
4.5
4.0
4.0
3.5
3.5
60
65
23.0 20.5 20.0 19.0 18.0 16.5 15.5 14.5 13.5 12.5 12.0 11.5 11.0 10.0
9.5
9.5
9.0
9.0
8.5
8.0
320 330
6.0
5.0
5.0
4.5
4.5
4.0
3.5
3.5
3.5
65
70
23.0 20.5 18.5 18.0 16.5 15.5 14.5 13.5 12.5 12.0 11.0 10.5 10.0
9.5
9.0
9.0
8.5
8.0
8.0
7.5
330 340
5.5
5.0
5.0
4.5
4.0
4.0
3.5
3.5
70
75
23.0 22.5 20.0 18.0 17.0 16.5 15.5 14.5 13.5 12.5 11.5 11.0 10.5 10.0
9.5
9.0
8.5
8.5
8.0
7.5
7.5
7.0
340 350
5.5
5.0
5.0
4.5
4.0
4.0
3.5
3.5
75
80
23.0 22.5 20.0 18.0 16.0 15.5 14.5 13.5 12.5 11.5 11.0 10.0
9.5
9.0
8.5
8.5
8.5
8.5
7.5
7.0
7.0
6.5
350 360
5.5
4.5
4.5
4.5
4.0
3.5
3.5
3.0
80
85
23.0 20.0 17.5 16.0 15.0 14.5 13.5 12.5 11.5 11.0 10.0
9.5
9.0
8.5
8.5
8.5
8.5
8.5
7.0
6.5
6.0
6.0
360 370
5.0
4.5
4.5
4.0
4.0
3.5
3.5
3.0
85
90
23.0 20.0 17.5 16.0 14.5 14.0 13.0 12.0 11.5 11.0
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.5
6.5
6.5
6.0
6.0
370 380
5.0
4.5
4.5
90
5.0
4.5
4.5
4.5
4.0
4.0
27.0
26.0
25.0
28.0
23.0
95
21.0 18.0 16.0 14.5 13.0 13.0 12.0 11.5 11.5 11.0
9.0
8.5
8.5
8.5
8.5
8.5
8.5
8.5
380 390
95 100
21.0 18.0 16.0 14.5 13.0 12.5 11.5 11.5 11.5 11.0
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
390 400
100 105
19.0 16.5 14.5 13.0 12.0 12.0 11.5 11.5 11.5 11.0
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
105 110
19.0 16.5 14.5 13.0 12.0 12.0 11.5 11.5 11.5 11.0
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
13.0
12.5
11.5
11.0
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
9.0
8.5
7.5
7.0
6.5
6.5
6.0
5.5
5.5
5.0
5.0
4.5
9.0
8.5
7.5
7.0
6.5
6.5
6.0
5.5
5.5
5.0
5.0
4.5
10.5
9.0
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.5
5.0
5.0
4.5
10.5
9.0
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.5
5.0
5.0
4.5
10.0
9.0
9.0
8.0
7.5
7.0
6.5
6.0
5.5
5.5
5.0
5.0
4.5
4.5
5.0
4.5
4.5
4.5
4.5
Available sizes of mild and special steel plates conforming to the representative standards are shown below. Regarding the standards
not shown below, see the tables for similar standards. Sizes other than those shown below are available upon advance consultation.
10
11
Available Sizes
Over
Width
(mm) 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000
to
to
Thickness
1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000 5200
(mm)
6
23.0
25.0
25.0
25.0
25.0
25.0
Over 6 7 or less
7
8
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
210
220
230
240
250
260
270
280
290
12
8
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
210
220
230
240
250
260
270
280
290
300
25.0
26.0
27.0
26.0
23.0
23.0
25.0
25.0
25.0
25.0
25.0
25.0
27.0
19.0
23.0
23.0
25.0
25.0
25.0
25.0
25.0
18.0
18.0
21.0
25.0
25.0
25.0
25.0
25.0
26.0
27.0
25.0
28.0
27.0
26.0
24.0 24.0 25.0
23.0 23.0 24.0
23.0
23.0
23.0
23.0
23.0
21.0
21.0
22.5
22.5
20.0
20.0
18.0
18.0
20.0
20.0
17.5
17.5
16.0
16.0
27.0
26.0
25.0
24.0
23.0
22.0
22.0
20.0
18.5
17.0
16.0
15.0
14.5
13.0
13.0
27.0
26.0
25.0
24.0
23.0
22.0
22.0
20.0
18.0
17.0
16.0
15.0
14.0
13.0
12.5
27.0
26.0
25.0
24.0
23.0
22.5
21.5
21.0
19.0
18.0
16.5
15.5
14.5
14.0
13.0
12.5
27.0
26.0
25.0
24.5
23.5
22.5
21.5
21.0
20.0
19.5
18.0
16.5
15.5
14.5
13.5
13.0
12.0
12.0
12.5
11.5
10.5
12.5
10.0
12.0
9.5
11.0
9.0
10.5
8.5
10.0
9.5
9.0
8.0
7.5
7.0
8.5
8.0
26.0
25.0
24.0
23.0
23.0
23.0
23.0
19.5
18.5
18.0
17.5
16.5
15.5
14.5
13.5
12.5
11.5
11.5
11.5
11.5
13.0
13.0
27.0
25.0
24.5
23.5
23.0
23.0
21.0
20.0
19.5
18.5
18.0
16.5
15.5
14.5
13.5
12.5
12.0
11.5
6.5
7.5
6.0
7.0
5.5
11.5
11.5
11.0
11.0
10.5
10.5
9.5
9.5
9.0
9.0
8.5
8.5
8.0
8.0
7.5
7.5
7.5
7.0
6.5
6.5
6.0
6.0
5.5
5.0
5.0
5.0
11.0 10.5
11.0 10.5
10.5
9.5
10.5
9.5
9.5
9.0
9.5
9.0
9.0
8.5
9.0
8.5
8.5
8.0
8.5
8.0
8.0
7.5
8.0
7.5
7.5
7.0
7.5
7.0
7.0
6.5
7.0
6.5
6.5
6.0
6.5
6.0
6.0
5.5
6.0
5.5
5.5
5.0
5.0
5.5
5.0
4.5
5.0
4.5
4.5
4.5
4.5
4.0
27.0
26.0
25.0
24.0
23.0
23.0
23.0
23.0
23.0
18.0
17.5
17.0
16.0
15.5
14.5
13.5
12.5
11.5
11.0
11.0
11.0
11.0
11.0
11.0
10.5
10.5
9.5
9.5
9.0
9.0
8.5
8.5
7.5
7.5
7.5
7.5
7.0
7.0
6.5
6.5
6.0
6.0
6.0
5.5
5.0
5.0
4.5
4.5
4.5
4.0
28.0
28.0
28.0
27.0
26.0
25.0
23.5
23.0
23.0
23.0
23.0
23.0
23.0
17.0
16.5
16.0
15.0
14.5
13.5
12.5
11.5
11.0
10.0
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.0
7.0
7.0
7.0
6.5
6.5
6.0
6.0
5.5
5.5
5.5
5.0
5.0
4.5
4.5
4.0
4.0
28.0
28.0
27.0
26.0
25.0
23.5
23.0
23.0
23.0
23.0
23.0
23.0
23.0
16.0
15.5
15.0
14.0
14.0
12.5
12.0
11.0
10.0
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.5
7.5
7.0
7.0
6.5
6.5
6.0
6.0
5.5
5.5
5.5
5.5
5.0
5.0
4.5
4.5
4.0
4.0
4.0
28.0
28.0
26.0
25.0
23.5
22.0
21.0
20.0
19.0
18.0
17.0
16.5
16.0
15.0
14.5
14.0
13.5
13.0
12.0
11.0
10.5
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.5
7.5
7.0
7.0
6.5
6.5
6.0
6.0
5.5
5.5
5.5
5.5
5.0
5.0
4.5
4.5
4.5
4.0
4.0
3.5
3.5
28.0
26.0
25.0
23.5
22.5
21.0
20.0
19.0
18.0
17.0
16.0
15.5
15.0
14.0
14.0
13.0
13.0
12.5
11.5
10.5
10.0
9.0
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.5
7.5
7.0
7.0
6.5
6.5
6.0
6.0
5.5
5.5
5.5
5.5
5.0
5.0
4.5
4.5
4.5
4.0
4.0
4.0
3.5
27.0
25.0
24.5
22.5
21.0
20.0
19.0
18.0
17.0
16.0
15.5
14.5
14.0
13.5
13.0
12.5
12.0
11.5
11.0
10.0
9.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.0
7.0
6.5
6.5
6.0
6.0
5.5
5.5
5.5
5.5
5.0
5.0
4.5
4.5
4.5
4.5
4.0
4.0
25.0
25.0
23.0
21.5
20.0
19.0
18.0
17.0
16.0
15.0
14.5
14.0
13.5
13.0
12.5
12.0
11.5
11.0
10.0
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.5
7.5
7.0
7.0
6.5
6.5
6.0
6.0
5.5
5.5
5.0
5.0
5.0
5.0
4.5
4.5
4.0
4.0
18.0
18.0
18.0
22.0
25.0
25.0
25.0
25.0
25.0
25.0
27.0
26.0
25.0
24.0
22.0
20.5
19.0
18.0
17.0
16.5
15.0
14.5
14.0
13.5
12.5
12.0
12.0
11.5
11.0
10.5
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.0
7.0
6.5
6.5
6.0
6.0
5.5
5.5
5.0
5.0
5.0
5.0
4.5
4.5
4.5
4.5
18.0
22.0
23.0
25.0
25.0
25.0
25.0
25.0
27.0
26.0
25.0
23.0
21.5
20.0
19.0
17.5
17.0
16.0
15.0
14.0
13.5
13.0
12.5
12.0
11.5
11.0
10.5
10.5
9.5
9.0
8.5
8.5
8.5
8.5
8.0
8.0
7.5
7.5
6.5
6.5
6.0
6.0
5.5
5.5
5.5
5.5
5.0
5.0
4.5
4.5
18.0
22.0
23.0
23.0
24.0
24.0
25.0
25.0
27.0
25.0
23.0
22.0
20.0
19.0
18.0
17.0
16.0
15.0
14.0
14.0
13.0
12.0
12.0
11.0
11.0
11.0
10.0
10.0
9.0
8.5
8.0
7.5
7.0
6.5
18.0
22.0
23.0
23.0
24.0
24.0
25.0
25.0
26.0
24.0
22.0
21.0
19.0
18.0
17.0
16.0
15.0
14.0
14.0
13.0
12.0
12.0
11.0
11.0
10.0
10.0
10.0
9.5
9.0
8.0
7.5
7.0
6.5
6.5
22.0
23.0
23.0
23.0
24.0
24.0
25.0
23.0
21.0
20.0
19.0
17.0
16.0
15.0
14.0
14.0
13.0
12.0
12.0
11.0
11.0
10.0
10.0
10.0
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
Over
Width
(mm) 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000
to
to
Thickness
1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4500 4600 4800 5000 5200
(mm)
12
26.0
25.0
24.0
23.0
Over 12 14 or less
23.0
23.0
23.0
24.0
24.0
24.0
22.0
21.0
19.0
18.0
17.0
16.0
15.0
14.0
13.0
13.0
12.0
11.0
11.0
10.0
10.0
10.0
9.5
9.0
9.0
8.0
7.5
7.0
6.5
6.0
6.0
Available Sizes
14
16
16
18
18
20
20
22
22
24
24
26
26
28
28
30
30
32
32
34
34
27.0
26.0
25.0
27.0
25.0 25.0
28.0
24.0 24.0
25.0
26.0
27.0
25.0
24.0 24.0
24.0 24.0
27.0 27.0
26.0 25.0
36
27.0 25.0 24.0 22.5 21.5 20.0 19.0 18.0 17.5 17.0
36
38
27.0 25.0 24.0 22.5 21.5 20.0 19.0 18.0 17.0 16.5 16.0
38
40
26.0 24.5 23.0 21.5 20.0 19.0 18.0 17.0 16.5 15.5 15.0
40
42
27.0 25.0 23.0 21.5 20.5 19.0 18.0 17.0 16.0 15.5 14.5 14.5
42
44
25.0 24.0 22.0 20.5 19.5 18.0 17.0 16.5 15.5 14.5 14.0 13.5
44
46
26.0 25.0 23.0 21.0 20.0 18.5 17.5 16.5 15.5 15.0 14.0 13.5 13.0
46
48
26.0 26.0 26.0 25.0 23.5 22.0 20.5 19.0 17.5 16.5 15.5 15.0 14.0 13.5 13.0 12.5
48
50
24.5 24.5 25.0 25.0 25.0 24.5 23.0 21.0 19.5 18.0 17.0 16.0 15.0 14.5 13.5 13.0 12.5 12.0
50
52
23.5 23.5 24.0 24.0 24.0 23.5 22.0 20.0 18.5 17.5 16.5 15.5 14.5 13.5 13.0 12.5 12.0 11.5
52
54
22.5 22.5 23.0 23.0 23.0 22.5 21.0 19.5 18.0 17.0 15.5 15.0 14.0 13.0 12.5 12.0 11.5 11.0
10.0 10.0
9.5
9.0
54
56
21.5 21.5 22.0 22.0 22.0 21.5 20.5 18.5 17.5 16.0 15.0 14.5 13.5 12.5 12.0 11.5 11.0 10.5
10.0
9.5
9.0
9.0
56
58
21.0 21.0 22.0 22.0 22.0 21.0 19.5 18.0 17.0 15.5 14.5 14.0 13.0 12.5 11.5 11.0 10.5 10.5
9.5
9.0
9.0
8.5
58
60
20.0 20.0 21.0 21.0 21.0 20.0 19.0 17.5 16.0 15.0 14.0 13.5 12.5 12.0 11.5 10.5 10.0 10.0
9.5
9.0
8.5
8.0
60
65
17.0 14.0 19.0 19.0 19.0 18.0 17.0 16.0 14.0 13.5 13.0 12.0 11.5 11.0 10.5 10.0
9.5
9.0
8.5
8.0
8.0
7.5
65
70
15.0 13.5 18.0 18.0 18.0 17.0 15.0 14.0 13.5 13.0 12.0 11.5 10.5 10.0
9.0
8.5
8.5
8.0
7.5
7.0
7.0
70
75
14.0 13.5 16.0 16.0 16.0 16.0 14.0 13.5 13.0 12.0 11.0 10.5 10.0
9.5
9.0
8.5
8.0
8.0
7.0
7.0
6.5
6.5
75
80
13.5 13.5 15.0 15.0 15.0 15.0 13.5 13.0 12.0 11.0 10.5 10.0
9.5
9.0
8.5
8.0
7.5
7.5
6.5
6.5
6.0
6.0
80
85
13.5
8.5
8.0
8.0
7.5
7.0
7.0
85
90
13.0
9.0
8.5
8.0
7.5
7.5
7.0
6.5
6.5
90
95
12.5
9.5
8.5
8.0
7.5
7.5
7.0
6.5
6.5
6.0
95
100
12.0
11.0 10.0
9.0
8.5
8.0
7.5
7.0
6.5
6.5
6.0
6.0
9.5
9.0
9.5
9.5
13
Weldable
High-tensile WELTEN
Strength Steel
Plates: WEL-TENTM Series
WELTEN540
WELTEN590
WELTEN610
Applicable
plate
thickness
mm
6t50
Mechanical properties
Si
Mn
0.20 0.55
1.70
2.00
2.00
0.035 0.035
0.030 0.025
0.030 0.025
Cu
Ni
Cr
Mo
Nb
Ti
0.50
0.50
WELTEN690
2.00
0.030 0.025
0.50
WELTEN780
2.00
0.020 0.015
0.50
1.20
1.20
1.30
2.00
0.015 0.010
0.50
t100
0.403.00
100<t
2.00
0.030 0.025
WELTEN690E
2.00
0.030 0.025
0.50
WELTEN780E
6t60
0.22 0.55
2.00
0.025 0.015
0.50
WELTEN950E
6t50
0.22 0.55
2.00
0.025 0.020
0.50
Approximate application
thickness mm
540
590
Tensile
strength
class
610
690
780
950
14
or less
10
15
20
25
0.45
PCM
Yield point or
proof stress
N/mm2
0.32
0.44t50
0.46t75
0.005 0.49t100
0.52t150
0.56t200
0.26t50
0.28t100
0.30t150
0.31t200
0.45t50
0.47t75
0.005 0.50t100
0.53t150
0.57t200
0.26t50
0.28t100
0.30t150
0.31t200
0.50t50
0.005 0.55t75
0.60t100
0.28t50
0.3250<t
0.60t100
0.005 0.63t150
0.67t200
0.30t50
0.32t100
0.34t150
0.36t200
0.30
0.005
0.55t50
0.60t100
0.32
0.005
0.60t50
0.63t60
0.34
0.005 0.76
RE
EX
Non-heat treated
Cr-added
Weldability
100
or less
32
or less
150
or less
100
or less
10
15
20
15
10
20
20
0.34t50
0.36t75
0.38t150
0.52
0.005 0.76
Economy
Steel types
Blanks
Standard
150200
0.503.50
t100
1.20 0.90 0.10 0.03
0.504.50
100<t
WELTEN590E
Ceq
0.402.00
WELTEN950
Impact testtest piece:JIS No.4, 2mm V-notich, L direction Bending testtest piece: JIS No.13
Tensile test
0.38
Tensile
strength
N/mm2
355
540
450t50
590710t75
57069075<t
43050<t
490t50
47050<t
550t50
53050<t
685t50
66550<t
885t50
86550<t
450t50
43050<t
550t50
53050<t
685t50
610730t75
59071075<t
690830t50
67081050<t
780930t50
76091050<t
9501130
590710t50
57069050<t
690830t50
67081050<t
66550<t
780930t50
76091050<t
885
9501130
Elongation
Min.
Thickness
elongation
mm
Absorbed energyJ
Inside bending radius
Test
tempera- Average
Each
Bending Thickness
Radius
tureC
mm
angle
value
value
Test
piece
JIS
Thickness
mm
12<t50
47
27
180
1.5t
12<t32
32<t
5
10
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
10
15
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
15
20
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
20
25
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
25
30
47
27
180
t32
32<t
1.5t
2.0t
12<t
47
27
180
t32
32<t
1.5t
2.0t
12<t
10
47
27
180
t32
32<t
1.5t
2.0t
12<t
15
47
27
180
t32
32<t
1.5t
2.0t
12<t
20
47
27
180
2.0t
t16
16<t
20<t
20
28
23
No.5
No.5
No.4
t16
20
No.5
16<t
28
No.5
20<t
20
No.4
t16
19
No.5
16<t
27
No.5
20<t
20
No.4
t16
16<t
20<t
17
25
17
No.5
No.5
No.4
t16
16
No.5
16<t
24
No.5
20<t
16
No.4
t16
13
No.5
16<
19
No.5
20<t
13
No.4
t16
16<t
20<t
t16
16<t
20<t
t16
16<t
20<t
t16
16<t
20<t
20
28
20
17
25
17
16
24
16
13
19
13
No.5
No.5
No.4
No.5
No.5
No.4
No.5
No.5
No.4
No.5
No.5
No.4
With respect to the standards in the table above, it is possible to add the following special requirements upon request.
SR guaranteed steel (-SR), Lamellar tear-resistant guaranteed steel (-Z35, etc.), Low-temperature specifications
< below the stipulated impact test temperature service> (-LT), Constant yield strength specifications (-H)
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2Carbon equivalent, Ceq, and weld crack sensitivity, PCM, are calculated for added elements using the following equation.
Ceq=C+Si/24+Mn/6+Ni/40+Cr/5+Mo/4+V/14%
PCM=C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B%
3In the bending test, cracks shall not occur in the outside of test piece.
15
Chemical composition%1
Brand name
WELTEN590RE
Applicable
plate
thickness
mm
Mechanical properties
Impact testtest piece:JIS No.4, 2mm V-notich, L direction Bending testtest piece: JIS No.13
Tensile test
C
Si
Mn
Cu
Ni
Cr
Mo
Nb
Ti
Ceq
PCM
Yield point or
proof stress
N/mm2
Tensile
strength
N/mm2
Elongation
Min.
Thickness
elongation
mm
Test
piece
JIS
Thickness
mm
Absorbed energyJ
Inside bending radius
Test
tempera- Average
Each Bending Thickness
Radius
tureC
mm
angle
value
value
2.00
0.030 0.025
0.40
0.40
0.15
0.15
0.45
450
590710
t16
16<t
20<t
20
28
20
No.5
No.5
No.4
12<t32
32<t
5
10
47
27
180
1.0t
WELTEN690RE
4t20
0.14 0.55
2.00
0.030 0.025
0.40
0.40
0.15
0.25
0.50
590
690830
t16
16<t
17
25
No.5
No.5
12<t20
15
47
27
180
1.5t
WELTEN780RE
4t9
0.16 0.55
2.00
0.030 0.025
0.40
0.40
0.15
0.30
0.55
685
780930
t9
15
No.5
180
1.5t
WELTEN950RE
3t8
0.16 0.55
2.00
0.025 0.020
0.50
885
9501250
t6
6<t
8
11
No.5
No.5
180
1.5t
685t50
780930t50
76091050<t
t16
16
No.5
16<t
24
No.5
12<t150
20
47
27
180
20<t
16
No.4
t32
32<t
1.5t
2.0t
t16
16<t
20<t
t16
16<t
20<t
t16
16<t
20<t
t16
16<t
20<t
t16
16<t
20<t
20
28
20
19
27
20
16
24
16
20
28
20
19
27
20
No.5
No.5
No.4
No.5
No.5
No.4
No.5
No.5
No.4
No.5
No.5
No.4
No.5
No.5
No.4
12<t32
32<t
5
10
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
10
15
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
20
25
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
5
10
47
27
180
t32
32<t
1.5t
2.0t
12<t32
32<t
10
15
47
27
180
t32
32<t
1.5t
2.0t
WELTEN780C
2.00
0.025 0.015
0.50
0.35
0.30
0.60 0.10 0.05
1.20
0.62t50
0.005 0.68t100
0.70t150
0.30t50
0.32t75
0.34t100
0.37t150
WELTEN590EX
6t76
0.09 0.40
2.00
0.030 0.025
0.50
0.80
0.005
0.20
WELTEN610EX
6t76
0.09 0.40
2.00
0.030 0.025
0.50
0.80
0.005
0.20
WELTEN780EX
6t50
1.50
WELTEN590EXS
6t40
0.07 0.40
2.00
0.030 0.025
0.30
0.60
WELTEN610EXS
6t40
0.07 0.40
2.00
0.030 0.025
0.30
0.60
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2Carbon equivalent, Ceq, and weld crack sensitivity, PCM, are calculated for added elements using the following equation.
Ceq=C+Si/24+Mn/6+Ni/40+Cr/5+Mo/4+V/14%
PCM=C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B%
3In the bending test, cracks shall not occur in the outside of test piece.
0.55
66550<t
450t50
43050<t
490t50
47050<t
590710
610730
685
780930
0.18
450
590710
0.18
490
610730
With respect to the standards in the table above, it is possible to add the following special requirements upon request.
SR guaranteed steel (-SR), Lamellar tear-resistant guaranteed steel (-Z35, etc.), Low-temperature specifications
< below the stipulated impact test temperature service> (-LT), Constant yield strength specifications (-H)
16
Track crane
17
2. Available Sizes
Tensile Strengths 540, 570, 590, 610
Width
(mm) 1000
to
Thickness
1200
(mm)
Over
1200
to
1400
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
22.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
24.0
22.5
21.0
20.0
19.0
18.0
17.5
16.5
16.0
15.0
14.5
14.0
13.5
13.0
12.5
11.5
11.0
10.0
9.5
8.5
8.5
7.5
7.5
7.0
6.0
5.5
5.5
20.0
23.0
25.0
25.0
25.0
25.0
25.0
25.0
24.5
22.5
21.5
20.0
19.0
18.0
17.0
16.5
15.5
15.0
14.5
14.0
13.5
13.0
12.5
12.0
11.0
10.0
9.5
9.0
8.0
8.0
7.0
7.0
6.5
6.0
5.5
21.0
23.0
25.0
25.0
25.0
25.0
24.5
23.0
21.5
20.0
19.0
18.0
17.0
16.5
15.5
15.0
14.0
13.5
13.0
12.5
12.0
11.5
11.5
10.5
9.5
9.0
8.5
7.5
7.5
6.5
6.5
6.0
5.5
5.0
6
Over 6
7 or less
7
8
9
10
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
110
120
130
140
150
155
160
165
175
190
8
9
10
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
110
120
130
140
150
155
160
165
175
190
200
25.0
24.5
23.5
23.0
23.0
23.0
23.0
22.5
22.5
20.0
20.0
18.5
17.0
13.0
13.5
13.5
22.5
22.5
20.0
20.0
18.0
18.0
16.5
15.0
13.0
13.0
12.5
20.0
20.0
17.5
17.5
16.0
16.0
14.5
13.5
12.5
11.5
11.0
20.5
20.5
18.0
18.0
16.0
16.0
14.5
14.5
13.0
12.0
11.0
10.5
9.5
22.5
21.5
21.5
21.5
18.5
18.5
16.0
16.0
14.5
14.5
13.0
13.0
12.0
11.0
10.0
9.5
9.0
22.5
21.5
21.0
20.5
18.5
17.5
16.0
15.0
14.0
13.0
12.5
12.0
11.0
10.0
9.5
8.5
8.0
24.0
23.0
22.0
21.0
20.5
19.5
19.0
17.5
16.0
15.0
14.0
13.0
12.5
11.5
11.0
10.0
9.0
8.5
8.0
7.5
14.0
13.0
12.0
24.0
24.0
22.5
24.5
23.0
21.5
20.5
21.5
23.5
24.0
22.0
20.5
19.5
23.0
21.5
20.0
19.0
22.0
20.5
19.0
18.0
21.0
19.5
18.0
17.0
20.5
19.0
17.5
16.5
19.5
18.0
17.0
16.0
19.0
17.5
16.5
15.0
18.0
17.0
15.5
14.5
17.5
16.5
15.0
14.0
16.0
15.0
14.0
13.0
15.0
14.0
13.0
12.0
14.0
13.0
12.0
11.5
13.0
12.0
11.5
10.5
12.0
11.0
10.5
10.0
11.5
10.5
10.0
9.5
11.0
10.0
9.5
8.5
10.5
9.5
9.0
8.5
9.5
8.5
8.0
7.5
8.5
8.0
7.5
7.0
8.0
7.0
7.0
6.5
7.5
7.0
6.5
6.0
7.0
6.5
6.0
5.5
13.0 12.0 11.0 11.0
13.0 12.0 11.0
12.0 11.0 11.0
12.0 11.0
11.0
24.0
22.5
21.5
20.0
19.0
18.5
17.5
16.5
16.0
15.5
15.0
14.5
14.0
13.5
12.5
11.5
10.5
10.0
9.0
9.0
8.0
8.0
7.0
6.5
6.0
5.5
5.0
21.0
25.0
25.0
25.0
25.0
23.5
22.0
20.5
19.0
18.0
17.0
16.5
15.5
15.0
14.0
13.5
13.0
12.5
12.0
11.5
11.0
11.0
10.0
9.0
8.5
8.0
7.0
7.0
6.5
6.5
6.0
5.5
21.0
25.0
25.0
24.0
22.5
21.0
19.5
18.5
17.5
16.5
15.5
15.0
14.0
13.5
13.0
12.5
12.0
11.5
11.0
10.5
10.5
9.5
9.0
8.0
7.5
7.0
7.0
6.0
6.0
5.5
25.0
23.5
22.0
20.5
19.0
18.0
17.0
16.0
15.0
14.5
14.0
13.0
12.5
12.0
11.5
11.0
11.0
10.5
10.0
9.0
8.5
8.0
7.5
6.5
6.5
6.0
6.0
5.5
11.0
18
Over 6
7 or less
7
8
9
10
12
22
24
26
28
30
32
34
8
9
10
12
22
24
26
28
30
32
34
36
Over
1200
to
1400
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
15.0
18.0
18.0
18.0
23.0
22.0
21.0
20.0
19.0
18.0
18.0
17.0
17.0
16.0
16.0
15.0
20.0
15.0
14.0
18.0
18.0
23.0
23.0
23.0
23.0
23.0
20.0
19.0
13.0
12.0
18.0
23.0
23.0
23.0
23.0
20.0
19.0
18.0
12.0
12.0
Over 6
7 or less
7
8
9
10
12
14
16
18
20
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
175
190
8
9
10
12
14
16
18
20
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
175
190
200
Over
1200
to
1400
23.0
23.0
23.0
20.0
19.0
18.0
17.0
12.0
12.0
15.0
23.0
23.0
19.0
18.0
17.0
16.0
11.0
11.0
15.0
23.0
20.0
18.0
17.0
16.0
15.0
11.0
10.0
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
12.0
14.0
15.0
20.0
20.0
20.0
16.0
20.0
21.0
20.0
19.0
18.0
17.0
16.0
15.0
14.0
13.0
12.0
11.0
10.0
21.0
21.0
22.0
21.0
21.0
15.0
15.0
22.0
22.0
21.0
21.0
21.0
22.0
22.0
22.0
21.0
21.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
21.0
21.0
22.0
22.0
21.0
20.0
20.0
22.0
21.0
19.0
19.0
18.0
20.0
19.0
18.0
18.0
17.0
22.0
20.0
19.0
18.0
17.0
17.0
16.0
20.0
19.0
18.0
17.0
16.0
16.0
15.0
21.0
19.0
18.0
17.0
16.0
16.0
15.0
14.0
21.0
20.0
18.0
17.0
16.0
16.0
15.0
14.0
14.0
21.0
20.0
19.0
18.0
17.0
16.0
15.0
13.0
13.0
13.0
21.0
19.0
19.0
17.0
16.0
15.0
14.0
13.0
13.0
13.0
21.0
20.0
18.0
17.0
16.0
15.0
14.0
14.0
13.0
12.0
12.0
20.0
19.0
18.0
16.0
15.0
15.0
14.0
13.0
12.0
12.0
12.0
21.0
20.0
18.0
17.0
16.0
15.0
14.0
13.0
13.0
12.0
11.0
11.0
20.0
19.0
17.0
16.0
15.0
14.0
13.0
12.0
12.0
11.0
11.0
11.0
21.0
20.0
18.0
17.0
16.0
15.0
14.0
13.0
12.0
12.0
11.0
10.0
10.0
21.0
20.0
18.0
17.0
16.0
15.0
14.0
13.0
12.0
11.0
10.0
10.0
10.0
20.0
18.0
17.0
16.0
15.0
14.0
13.0
12.0
11.0
11.0
10.0
10.0
10.0
20.0
18.0
17.0
16.0
14.0
13.0
13.0
12.0
11.0
10.0
10.0
9.0
9.0
9.0
21.0
19.0
17.0
16.0
14.0
13.0
12.0
12.0
11.0
10.0
10.0
9.0
8.0
8.0
8.0
18.0
16.0
15.0
13.0
12.0
12.0
11.0
10.0
10.0
9.0
9.0
8.0
8.0
8.0
18.0
16.0
15.0
14.0
13.0
12.0
11.0
10.0
9.0
9.0
8.0
8.0
7.0
7.0
7.0
17.0
15.0
14.0
13.0
12.0
11.0
10.0
9.0
9.0
8.0
8.0
7.0
7.0
7.0
7.0
16.0
15.0
13.0
12.0
11.0
10.0
10.0
9.0
8.0
8.0
7.0
7.0 14.014.013.0
15.0
14.0
12.0
11.0
10.0
10.0
9.0
8.0
8.0
7.0 14.014.014.013.012.0
13.0
12.0
11.0
10.0
9.0
9.0
8.0 14.014.014.014.013.012.012.0
12.0
11.0
10.0
9.0
9.0
8.0 14.014.014.014.013.012.011.011.0
13.0
12.0
11.0
10.0
9.0
8.0 14.014.014.014.013.012.011.011.011.0
11.0
10.0
9.0
9.0 14.014.014.014.013.012.011.011.0
11.0
10.0
9.0
8.0 14.014.014.014.012.012.011.0
10.0
9.0
9.0 14.014.014.014.012.012.011.0
10.0
9.0 14.014.014.014.013.012.011.011.0
10.0
9.0 14.014.014.014.012.011.011.0
10.0
9.0 14.014.014.014.013.012.011.0
9.0 14.014.014.014.012.011.011.0
14.014.014.014.013.012.011.0
13.012.011.011.0
14.0
13.012.011.0
12.011.011.0
13.0
12.011.0
12.0
11.0
11.0
18.0
18.0
23.0
23.0
23.0
23.0
23.0
23.0
20.0
19.0
14.0
13.0
Width
(mm) 1000
to
Thickness
1200
(mm)
6
6 or over 7 or less
Over 7 8 or less
8
9
10
12
14
16
18
9
10
12
14
16
18
20
Over
1200
to
1400
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
16.0
20.0
20.0
20.0
21.0
21.0
21.0
21.0
21.0
16.0
19.0
20.0
20.0
20.0
21.0
21.0
21.0
21.0
19.0
19.0
20.0
20.0
21.0
21.0
21.0
21.0
17.0
19.0
20.0
20.0
20.0
21.0
21.0
21.0
20.0
20.0
20.0
21.0
21.0
21.0
20.0
20.0
20.0
21.0
21.0
20.0
20.0
21.0
21.0
19.0
20.0
21.0
21.0
20.0
20.0
21.0
20.0
20.0
19.0
20.0
20.0
20.0
18.0
21.0
19
2. Available Sizes
ABREX TM Series is steel with abrasion resistance 25 times that of conventional mild steel.
It is applied in fields requiring abrasion resistance such as the bucket of shovel loaders, conveyer
hoppers, dump truck load carriers, and the blades of bulldozers.
Brand name
Applicable
plate
thickness
mm
Chemical composition%1
C
ABREX400
4t100
0.21
ABREX450
6t100
0.23
Si
Mn
Ni
Cr
Mo
0.025
1.20
0.025
0.015
1.20
1.00 t50 0.60
1.50
50<t
0.015
1.20
ABREX500
6t100
ABREX600
8t25
0.45
0.70
0.010
Width
(mm) 1000
Brinell hardness HB 3
PCM 2
Min.
0.30t25
0.70
0.70
t50 2.00
1.20
0.35 50<t
ABREXTM400, 400LT
360
440
0.36t50
0.4050<t
410
490
0.42t50
0.4550<t
450
550
0.54
550
650
0.3525<t
0.005
Max.
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2Weld crack sensitivity, PCM, are calculated for added elements using the following equation.
PCM=C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B%
3Hardness test shall be carried out in accordance with JIS Z 2243 (method of Brinell hardness Test).
The ABREX TM LT series is steel that has excellent abrasion resistance, as well as high notch toughness
performance even in low temperature (40C) environments.
Brand name
Applicable
plate
thickness
mm
Brinell hardness HB 3
Chemical composition%1
C
Si
Mn
Ni
Cr
Mo
Max.
ABREX450LT
0.36t25
6t50 0.28 1.20 2.00 0.020 0.010 1.00 1.20 0.60 0.005
0.4025<t
410
490
ABREX500LT
6t80 0.35
0.42t25
0.4525<t
450
550
t 25
1.50
25<t
1When necessary, alloying elements other than those shown in the tale may be added.
2Weld crack sensitivity, PCM, is calculated for added elements using the following equation.
PCM=C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B%
3Hardness test shall be carried out in accordance with JIS Z 2243 (method of Brinell hardness Test).
4Impact tests shall be applicable in case that plate thickness is over 12mm.
20
0.30t25
0.3525<t
Min.
4t60 0.21
0.015
1.20
PCM 2
ABREX400LT
Remarks:
0.020
360
Impact test 4
Tempera- Absorbed
ture
energy
C
J
440
40
27
Average
21
Average
to
1200
Thickness
(mm)
Over
1200
to
1400
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
22.0
20.0
19.0
18.0
18.0
17.0
16.0
15.0
14.0
14.0
13.0
13.0
12.0
22.0
21.0
19.0
18.0
17.0
17.0
16.0
15.0
15.0
14.0
14.0
13.0
13.0
12.0
22.0
21.0
20.0
19.0
18.0
16.0
16.0
15.0
15.0
14.0
13.0
13.0
12.0
12.0
12.0
22.0
20.0
19.0
18.0
17.0
16.0
16.0
15.0
14.0
14.0
13.0
13.0
12.0
12.0
11.0
8.0
10.0
Over 6
7 or less
7
8
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
8
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
85
90
95
100
15.0
18.0
23.0
22.0
22.0
20.0
19.0
18.0
17.0
16.0
15.0
14.0
22.0
22.0
20.0
18.0
17.0
16.0
15.0
22.0
21.0
20.0
19.0
17.0
16.0
15.0
22.0
21.0
21.0
20.0
19.0
18.0
17.0
16.0
15.0
22.0
21.0
20.0
20.0
19.0
18.0
17.0
16.0
15.0
14.0
13.0
22.0
21.0
20.0
19.0
19.0
18.0
17.0
17.0
16.0
15.0
to
1200
Thickness
(mm)
4.5 or over
Over 5
6 or over
Over 7
5 or less
6 less
7 or less
8 or less
8
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
Over
1200
to
1400
22.0
20.0
20.0
19.0
18.0
17.0
17.0
16.0
15.0
15.0
14.0
13.0
22.0
20.0
20.0
19.0
18.0
17.0
17.0
16.0
15.0
15.0
14.0
13.0
22.0
20.0
19.0
18.0
18.0
17.0
16.0
16.0
15.0
14.0
14.0
13.0
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
220
200
190
180
180
170
160
150
220
210
190
180
170
170
160
150
150
220
210
200
190
180
160
160
150
150
140
220
200
190
180
170
160
160
150
140
140
8.0
10.0
130
18.0
23.0
220
220
210
200
220
210
200
190
220
200
200
190
180
170
220
200
200
190
180
170
220
200
190
180
180
170
160
21
Brand name
Chemical composition%1
Applicable
plate
thickness
mm
Si
Mn
Mechanical properties
Ni
Cr
Mo
Yield point or
Tensile
proof stress
strength Thickness
N/mm2
N/mm2 mm
Bending test 2
Elongation
NTUF295
6t50
0.14
1.001.60
295
420540
t<21
21t
10.8+5t
24
No.5
No.4
1.0t
NTUF325
6t32
0.14
1.001.60
325
440560
t<21
21t
9.4+5t
22
No.5
No.4
1.5t
NTUF365
6t50
0.14
0.70
365
490610
t<21
21t
7.4+5t
20
No.5
No.4
NTUF490
6t50
0.16
0.901.60
0.60
490
610740
t<21
21t
3.6+5t
17
No.5
No.4
1.5t
NTUF570
6t26
0.14
0.70
2.00
2.75
0.50 0.55
570
670800
t<21
21t
2.2+5t
15
No.5
No.4
1.5t
0.150.35
1.001.60
0.030 0.030
Impact test
radius/Thickness
JIS
180
1.5t
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2In the bending test, cracks shall not occur in the outside of test piece.
The bending test can be eliminated unless otherwise specified.
2. Available Sizes
Please refer to page 28 for the scope of production.
Brand name 1
STEN1
Applicable
plate
thickness
mm
1.6t20.2
Chemical composition%2
C
0.14
Si
Mn
0.55
0.025
0.025
1.60
STEN2
2.0t20.2
0.14
0.150.55
Cu
Mechanical properties
Cr
Tensile
strength
N/mm2
Ti
Other
Yield point or
proof stress
N/mm2
Sb
0.15
245t16
400510
235t20.2
325t16
490610
315t20.2
0.250.50
0.035
0.035
0.501.00 0.15
Bending test 5
Elongation
Thickness
mm
radius/Thickness
JIS
t16
18
No.1A 4
16<t
22
t20.2
23
No.1A 4
No.5
t16
17
No.1A 4
16<t
21
t20.2
22
No.1A 4
No.5
180
1.5t
180
1.5t
Remarks:
1S-TEN1 plate macufactured at Nippon Steel & Sumitomo Metal's plate mills conforms to JIS G 3106 SM400A, and STEN2 to JIS G 3106 SM490A.
2When necessary, alloying elements other than those shown in the tale may be added.
3The Mn standard value of S-TEN1 is 2.5[ C ]Mn.
4Applied in the case of manufacture as JIS G 3106.
5In the bending test, cracks shall not occur in the outside of test piece.
The bending test can be eliminated unless otherwise specified.
2. Available Sizes
Please refer to page 28 for the scope of production.
22
23
Brand name
Mechanical properties
Tensile test
Si
Mn
Cu
Ni
Cr
2)
v -Value
A
NAWTEN12400
6t100
235
16<t40
1.25
A
B
6t100
0.501.00
NAWTEN12570
0.701.70
1.20
1.40
0.18
0.150.65
0.035
0.035
0.08
1.25
A
NAWTEN15490
6t100
NAWTEN15570
0.300.50
2.503.50
1.40
6t100
1.50
1When necessary, alloying elements other than those shown in the tale may be added.
2) v -Value (mass %):
v -Value = 1/{ (1.0-0.16 [C]) x (1.05-0.05 [Si]) x (1.04-0.016 [Mn]) x (1.0-0.5 [P]) x (1.0+1.9 [S]) x (1.0-0.10 [Cu]) x (1.0-0.12 [Ni]) x (1.0-0.3 [Mo]) x (1.0-1.7 [Ti]) }
(ref. J. of JSCE (2003), No. 738,-64, pp271-281. (in Japanese)
t16
17
1A
1A
23
365
t16
16<t40
355
335
40<t75
325
75<t100
t16
15
1A
16<t
19
1A
40<t
21
t16
19
16<t
26
20<t
20
t16
17
1A
490610
570720
27
47
21
1A
23
365
t16
355
16<t40
40<t75
335
325
75<t100
t16
15
1A
16<t
19
1A
40<t
21
t16
19
16<t
26
20<t
20
570720
47
47
40<t
490610
27
16<t
460
t16
450
16<t40
40<t75
430
400540
215
40<t100
420
75<t100
Remarks:
Absorbed
energy
J
21
16<t40
235
Temperature
C
40<t
t16
245
6t100
Test piece
JIS
16<t
40<t75
430
420
75<t100
400540
Elongation
Thickness Min. elongation
mm
215
40<t100
460
t16
450
16<t40
6t100
A
NAWTEN15400
Tensile
strength
N/mm2
t16
245
NAWTEN12490
27
47
27
47
47
2. Available Sizes
Please refer to page 29 for the scope of production.
Bridge
24
Bridge
25
Chemical composition%1
Brand name
Mechanical properties
Si
Mn
Cu
Ni
Cr
0.17
0.300.65 0.801.25
0.035
0.035
0.300.40
CORTEN570 2
Tensile
strength
N/mm2
2. Available Sizes
Yield point or
proof stress
N/mm2
360t16
6t50
6t50
0.17
0.300.65 0.801.25
0.035
0.035
0.300.40
1.6t76
0.12
0.250.75 0.200.50
0.070
0.150
0.250.55
0.301.25
15
No.1A
Thickness
mm
27
47
27
t5
1.0t
5<t
1.5t
19
No.1A
21
No.4
460t16
t16
16<t
20<t
19
26
20
No.5
No.5
No.4
t5
5<t
32520<t38 46020<t38
t38
29538<t
43038<t
38<t
22
18
21
23
No.5
No.1A
No.1A
No.4
180
490t20
Tem- Absorbed
perature energy
Radius C
J
Bending
angle
40<t
0.65
t16
Impact test
Test
16<t
355t20
0.035
Elongation
33540<t
43040<t
CORTEN O
Bending test 3
Tensile test
A
CORTEN490
Applicable
plate
thickness
mm
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2The yield point of COR-TENTM 570 can be set at 490 N/mm2 or more in accordance with the customer
s request.
However, in this case, the tensile strength shall be 570~740 N/mm2.
3In the bending test, cracks shall not occur in the outside of test piece.
The bending test can be eliminated unless otherwise specified.
TM
Brand name
CORTEN A
CORTEN B
Applicable
plate
thickness
mm
t12.7
0.12
Si
Mn
Mechanical properties
0.050
Cu
0.19
CORTEN B-QT
t38
CORTEN C
t25
0.19
0.300.65 0.801.25
0.040
0.300.65 0.801.35
0.040
0.050
0.050
Thickness
mm
Other
0.250.55
t200
2. Available Sizes
Please refer to page 29 for the scope of production.
Chemical composition%
0.250.40
0.250.40
Cr 0.501.25
Ni 0.65
Cr 0.501.25
V 0.020.10
Ni 0.40
Cr 0.400.70
V 0.040.10
Ni 0.40
Yield point or
proof stress
N/mm2
Elongation
Tensile
strength
N/mm2
Test piece
GL
Min. elongation
22
18
mm
t12.7
345
485
50
200
t100
345
485
50
200
21
18
100<t125
315
460
ASTM A6M
50
21
125<t200
290
435
ASTM A370
50
21
t38
485
620760
50
19
t25
415
550
50
200
21
16
TM
Chemical composition%1
Brand name
MARILOY S400A
Applicable
plate
thickness
mm
3.2t32
Mechanical properties
Bending test 2
Tensile test
C
0.14
Si
0.55
Mn
1.50
0.030
0.030
Cr
0.801.30
Tensile
strength
N/mm2
400
Elongation
Thickness
mm
Min. elongation
Test piece
JIS
t5
5<t16
16<t
23
19
22
No.5
No.1A
No.1A
Radius
180
1.0t
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2In the bending test, cracks shall not occur in the outside of test piece.
The bending test can be eliminated unless otherwise specified.
26
27
Available Sizes
Width
(mm) 1000
to
Thickness
1200
(mm)
6
Over
1200
to
1400
12.0
20.0
14.0
Over 6 7 or less
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
10
10
12
14
16
16
18
18
20
20
15.0
20.0
21.0
20.0
20.0
12
21.0
21.0
21.0
14
21.0
21.0
21.0
10
10
12
21.0
21.0
12
14
21.0
21.0
21.0
21.0
14
16
21.0
21.0
16
18
21.0
21.0
18
20
22
20
22
22
24
22
24
24
26
24
26
26
28
28
28
30
30
32
32
34
34
36
36
38
22.0
20.0
38
40
40
42
42
44
21.0
44
46
46
48
48
21.0
50
20.0
21.0
21.0
26
1600
1600
1800
1800
2000
2000
2200
2200
2400
16.0
Over 6 7 or less
2400
2600
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4500
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
23.0
22.0
22.0
22.0
21.0
20.0
20.0
20.0
28
30
22.0
21.0
20.0
19.0
19.0
19.0
18.0
30
32
22.0
21.0
20.0
19.0
18.0
18.0
20.0
19.0
18.0
18.0
17.0
32
34
21.0
20.0
19.0
18.0
17.0
17.0
20.0
19.0
18.0
17.0
17.0
16.0
34
36
20.0
19.0
18.0
17.0
16.0
16.0
19.0
18.0
17.0
16.0
16.0
15.0
36
38
19.0
18.0
17.0
16.0
15.0
15.0
14.0
38
40
18.0
17.0
16.0
15.0
14.0
14.0
21.0
19.0
18.0
17.0
16.0
21.0
20.0
18.0
17.0
16.0
16.0
15.0
14.0
14.0
40
42
14.0
13.0
12.0
12.0
11.0
11.0
20.0
19.0
18.0
17.0
16.0
15.0
13.0
13.0
13.0
42
44
14.0
13.0
12.0
12.0
11.0
11.0
21.0
19.0
19.0
17.0
16.0
15.0
14.0
13.0
13.0
13.0
44
46
14.0
13.0
12.0
12.0
11.0
11.0
20.0
18.0
17.0
16.0
15.0
14.0
14.0
13.0
12.0
12.0
46
48
14.0
13.0
12.0
12.0
11.0
11.0
12.0
48
50
14.0
13.0
12.0
12.0
11.0
11.0
50
52
21.5
19.5
19.5
18.0
17.0
15.5
14.5
14.0
13.0
12.5
11.5
11.5
11.0
10.5
10.0
52
54
21.5
19.5
19.5
18.0
17.0
15.5
14.5
14.0
13.0
12.5
11.5
11.5
11.0
10.5
10.0
54
56
21.5
19.5
19.5
18.0
17.0
15.5
14.5
14.0
13.0
12.5
11.5
11.5
11.0
10.5
10.0
56
58
21.5
19.5
19.5
18.0
17.0
15.5
14.5
14.0
13.0
12.5
11.5
11.5
11.0
10.5
10.0
58
60
21.5
19.5
19.5
18.0
17.0
15.5
14.5
14.0
13.0
12.5
11.5
11.5
11.0
10.5
10.0
60
65
18.5
17.0
17.0
15.5
14.5
13.5
12.5
12.0
11.5
11.0
10.0
9.5
9.0
9.0
8.5
65
70
18.5
17.0
17.0
15.5
14.5
13.5
12.5
12.0
11.5
11.0
10.0
9.5
9.0
9.0
8.5
70
75
22.5
20.0
16.0
15.0
15.0
13.5
12.5
12.0
11.0
10.5
10.0
9.5
9.0
8.5
8.5
8.5
8.5
75
80
22.5
20.0
16.0
15.0
15.0
13.5
12.5
12.0
11.0
10.5
10.0
9.5
9.0
8.5
8.5
8.5
8.5
80
85
20.0
17.5
14.5
13.0
13.0
12.5
11.5
11.5
11.0
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.5
85
90
20.0
17.5
14.5
13.0
13.0
12.5
11.5
11.5
11.0
9.5
9.0
8.5
8.5
8.5
8.5
8.5
8.5
90
95
21.0
18.0
16.0
13.0
12.0
12.0
11.5
11.5
11.5
11.0
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.0
95 100
21.0
18.0
16.0
13.0
12.0
12.0
19.0
18.0
16.0
15.0
15.0
14.0
13.0
16.0
12.0
15.0
12.0
Available Sizes
1400
1800
19.0
STEN 1, 2
Over
1200
to
1400
1600
21.0
TM
Width
(mm) 1000
to
Thickness
1200
(mm)
6
1400
21.0
28
21.0
21.0
Over
1200
to
1400
21.0
21.0
16.0
1600
Over 6 7 or less
1400
Available Sizes
2600
2800
2800
3000
3000
3200
3200
3400
3400
3600
3600
3800
3800
4000
4000
4200
4200
4400
4400
4500
23.0
11.5
11.5
11.5
11.0
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.0
100 105
11.5
11.5
11.5
11.0
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.5
105 110
11.5
11.5
11.5
11.0
8.5
8.5
8.5
8.5
8.5
8.0
8.0
7.5
110 115
11.5
11.5
11.5
10.5
8.5
8.5
8.5
8.0
8.0
7.5
7.0
6.5
11.5
11.5
11.5
10.5
8.5
8.5
8.5
8.0
8.0
7.5
7.0
6.5
11.5
11.0
10.5
9.5
8.5
8.5
8.0
7.5
7.0
7.0
6.5
6.0
6.0
115 120
10
120 125
12.5
10
12
125 130
12.5
11.5
11.0
10.5
9.5
8.5
8.5
8.0
7.5
7.0
7.0
6.5
12
14
130 135
12.5
11.0
10.5
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.5
6.0
5.5
14
16
135 140
12.5
11.0
10.5
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.5
6.0
5.5
16
18
140 145
12.5
10.5
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
6.0
5.5
5.5
18
20
145 150
12.5
10.5
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
6.0
5.5
5.5
20.0
23.0
13.0
12.0
11.5
29
Brand name
BTHT325
BTHT355
BTHT385
B
C
B
C
40<t100
40<t100
12t100
16t100
B
BTHT440
SA440
C
BSP
Si
0.18t50
0.55
0.20t100
Mn
1.60
0.20
0.55
1.60
0.20
0.55
2.00
19t100
0.030
0.015
0.020
0.008
0.030
0.015
0.020
0.008
0.030
0.015
0.020
0.008
Cu
Ni
Cr
Mo
Nb
Other
fHAZ
Ceq 3
0.38t50
0.55
1.60
0.12
0.020
0.030
PCM 3
0.24t50
0.40t100 0.26t100
0.40t50
0.26t50
0.42t100 0.27t100
2
0.58%
0.4412t<19 0.26t50
0.4019t50
0.4250<t100 0.2750<t
0.030
0.18
CSP
Mechanical properties
Tensile test
Elongation
Yield
Yield point or Tensile
Average value
proof stress strength ratio 4 Thickness Min. elongation Test piece of 3 test pieces
N/mm2 N/mm2
%
mm
JIS
325445
490610
80
t50
40<t
21
23
No.1A
No.4
355475
520640
80
t50
40<t
19
21
No.1A
No.4
385505
550670
80
t32
32<t
15
20
No.1A
No.4
26
20
No.5
No.4
26
20
No.5
No.4
9t16
16<t20
20<t
16
24
16
No.5
No.5
No.4
0.28t40
0.008
0.44t40
0.47t100
0.020
0.30t100
440540
590740
80
BTHT630
0.16
0.35
0.601.60
0.030
0.015
1.50
2.00
0.80
0.60
0.60
0.05
0.60
0.35
630750
780930
85
fHAZ
BTHT400C
16<t100
0.20
0.55
2.00
0.020
0.008
BTHT500C
19t100
0.18
0.55
2.00
0.020
0.008
6t50
0.25
0.55
2.00
0.015
BTHT700
HSA700
0.58%
0.030
0.40
0.26
0.44t40
0.28t40
0.47t100 0.30t100
0.65
0.025
0.30
9t50
0.16
0.55
1.50
0.015
0.008
0.62
0.34
25
15
25
15
25
15
25
15
25
15
25
15
TemAbsorbed
Thickness
perature
energy
mm
C
J
40<t
27
40<t
27
12t
70
47
70
9t
47
19t
490640
90
t50
40<t
21
23
No.1A
No.4
25
15
16<t
70
500650
590740
90
19t
20<t
26
20
No.5
No.4
25
15
19t
70
No.5
No.4
No.5
47
98
16
16
24
7801000
6t20
20<t50
20<t50
700900
20
47
9t16
16<t20
20<t50
13
19
13
No.5
No.5
No.4
0.32
0.60
Each
value
400550
B
BTHT880
0.22
B
9t100
8801060
9501130
98
12<t
25
15
9t12
12<t50
53
70
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2fHAZ 0.58% [for vE0C (multi-pass welding) 70J]
fHAZ=C+Mn/8+6P+S+12N 4Ti%
fHAZ (%): a chemical composition parameter for estimating the HAZ (Heat Affected Zone) toughness of building columnbeam welding.
The content of Ti should be consideredas 0 when it is equal to or less than 0.005 mass%.
3Carbon equivalent, Ceq, and weld crack sensitivity, PCM, are calculated for added elements using the following equation.
Ceq=C+Si/24+Mn/6+Ni/40+Cr/5+Mo/4+V/14%
PCM=C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B%
4Yield ratio = Yield point or 0.2% proof stress/tensile strength 100%
5Tested by 7.5mm subsize specimen.
30
31
Brand name
SN400B
Si
Mn
6t100
Cr
SN400C 16t100
SN490B
PCM
0.70 0.300.70
1.60
0.70 0.300.90
SN490C 16t100
Yield point or
proof stress
N/mm2
Tensile
strength
N/mm2
Nb+V+Ti
0.26
0.10
Nb+V+Ti
0.26
0.10
0.020 0.008
235355t40
215335t100
235355t40
Thickness
mm
80
400510
Elongation
Yield
ratio
235t<12
0.030 0.015
0.15 0.55
Other
0.020 0.008
6t100
NSFR490
Mo
0.030 0.015
0.15 0.35 0.601.40
NSFR400
Mechanical properties
Tensile test
80
80
6t16
16<t50
40<t100
18
t=16
16<t50
40<t100
18
22
24
22
215335t100
80
325t<12
80
80
6t16
16<t50
40<t100
17
80
t=16
16<t50
40<t100
17
325445t40
295415t100
325445t40
490610
295415t100
80
The performance of this steel in normal temperatures satises the applicable JIS, so it will be marketed as a JIS product.
This steel has low carbon levels, so it is stipulated by PCM, and thus Ceq does not apply.
Average value
JIS
24
21
23
21
23
No.1A
No.1A
No.4
No.1A
No.1A
No.4
25
No.1A
No.1A
No.4
No.1A
No.1A
No.4
25
Each
value
Absorbed
energyJ
Thicknessmm
t40
40<t100
157
143
217
197
15
27
15
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2Weld crack sensitivity, PCM, is calculated for added elements using the following equation.
PCM=C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B%
BTLYP100
Applicable
plate
thickness
mm
6t50
Tensile test
C
Si
Mn
0.01
0.03
0.20
Other
Mechanical properties
Impact test V notch
Elongation
Yield
Ceq 2 Lower yield stress Tensile
or proof stress
strength
ratio Min. elongation Test piece
N/mm2
N/mm2
JIS
Temperature
C
Absorbed
energy
J
N0.006
0.36
80120
200300
60
50
No.5
27
N0.006
0.36
205245
300400
80
40
No.5
27
0.025 0.015
BTLYP225
6t50
0.10
0.05
0.50
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2Carbon equivalent, Ceq, is calculated for added elements using the following equation.
Ceq=C+Si/24+Mn/6+Ni/40+Cr/5+Mo/4+V/14%
32
33
Conclusions
Summary
TM
NS-MIPTM is steel that has excellent magnetic properties due to the fact that the impurities are made to be
extremely limited in volume and granularized. To date, it has been applied in MRI devices used for medical
purposes, direct current electromagnets such as lifting magnets, particle accelerators such as cyclotrons,
and the like.
Chemical composition%1
Brand name
NSMIP250
Applicable
plate
thickness
mm
At Nippon Steel & Sumitomo Metal, we will continue to combine the technology we have accumulated to date with the results of uninterrupted development
by our research laboratories and manufacturing and development divisions,
as we strive to develop and manufacture various types of products that adapt
to usage environments, purposes and demands that change with the times.
Mechanical properties 2
Tensile test
6t270 0.02
Si
0.02
Mn
0.20
Yield point or
proof stress
N/mm2
0.020 0.010
100
Remarks:
1When necessary, alloying elements other than those shown in the tale may be added.
2The procedure of mechanical test shall conform to the provision of JIS G 3136.
Tensile
strength
N/mm2
Elongation
Thickness Elongation Test piece
mm
JIS
t16
16<t50
50<t
220
50<t
250
t50
18
22
24
No.1A
No.1A
No.4
Magnetic ux densityT3
Brand name
NSMIP250
Bridge
B1
B2
B3
B5
B25
0.70
1.10
1.25
1.35
1.55
Offshore structure
Remarks:
3B1, B2, B3, B5 and B25 respectively indicate the magnetic flux density at
1 = Oe (79.6 A/m), 2 = Oe (159.2 A/m), 3 = Oe (238.8 A/m),
5 = Oe (398 A/m), 25 = Oe (1990 A/m).
Test specimens will be fabricated, then thermally treated in the same way
as the host material, and then measured.
(Compliant with JIS C 2504-1990 Soft magnetic iron plates)
Medical MRI
is intended-e.g., tank heads, shell plates, bridge beam flanges-should be given in as much detail as possible.
2The fabrication method to be employed and fabrication conditions-e.g., cold forming, hot forming, bending radius and
direction, drawing, welding and cutting-should be clearly described.
Inquiries about plates that have already been delivered should include information about the contract number, specification number, product dimensions and the plate numberheat number.
34
Dumpu truck
Marking
Plates are shipped without bundling and are loaded in bulk.
Example of marking is shown below.
Company Mark
Company Name
Specification
Dimension
Heat No.
Plate No.
Building
TOKYO SKYTREETM
35
Ferrite
Perlite
Nucleus of grain
Growth of grain
Fig. 1 The relationship between the cooling rate of the transformation temperature zone
and metallographic structure as well as the strength level
1200C
Bainite
Martensite
Tensile strength
StrengthMPa
Temperature
Fig. 3 Schematic image of grain size following to the balance of crystal nucleation
and growth
TMCP
Heat treatment
Yield strength
Time
Grain size
Ceq=C+Mn/6+Cr+M+V/5+Ni+Cu/15Wt%
50m
Cooling rate
100C/sec (rate)
10C/sec (rate)
1C/sec (rate)
0.1C/sec (rate)
Metallographic structure
Martensite
Bainite
Strength level
Over 800MPa
800MPa
500MPa
400MPa
Process
Control of casting conditions
TMCP is a technique that, compared to conventional manufacturing processes, has a greatly expanded range of control of
the metallographic structure and enables drastic reduction in
grain size.
TMCP is an abbreviated name of a type of steel manufacturing
technique formed from the initials of Thermo-Mechanical Control
Process. TMCP achieves a new structural control technique not
found in conventional heat treatment methods, by combining
reheating, rolling and cooling. The key technology is found in the
implantation of new grain seeds (nucleus) by means of rolling,
and in the reduction of grain size by means of cooling following
the rolling. By combining the effect of the working in the rolling
process and the effect of the control of the cooling rate in the
transformation temperature range in the cooling process, a
new structural control technique not found in conventional heat
treatment methods was achieved.
The basic way of thinking about reducing the grain size is that
if the inside of the steel (steel plate) can be filled with a greater
quantity of grains, the size of each individual grain can made
small, as shown in Fig. 3. In other words, if a large number of
grains are continuously formed, and furthermore if the growth
of each grain is inhibited, then fine microstructures will be
obtained. The key technology in TMCP is the creation of a
large number of nuclei by means of rolling, and the inhibition of
the growth of the grains by cooling following the rolling.
The metallographic structure control technique of TMCP is
not limited to the reduction of grain size. As shown in Fig. 4,
the necessary characteristics can be acquired by continuously
controlling the metallographic structure in each process,
from the steel making process to the reheating, rolling, and
controlled cooling processes of the steel plates. In addition to
ferrite, TMCP can also control a wide range of high-strength
metallographic structures such as martensite and bainite.
Temperature change
Change of
metallographic structure
Re-heating
Suppression of
grain growth
Plate
Cooling
Rough rolling
Finish rolling
Recrystalezation
Drawing
Strength
36
Transformation
Rapid cooling:
Martensite
Medium cooling:
Bainite
Mild cooling:
Ferrite, Perlite
Over 800N/mm2
600 800N/mm2
500 600N/mm2
37
2. Welding
about 1,100C
Easily damaged
embrittlement area
Welding metal
Fusion line
Unaffected
Melting temperature
(1500C)
>1250C
1100900C
Two-phase zone
(Inter-critically
reheated)
900700C
Temper zone
700400C
400C
room temperature
TS 780N/mm2class
140
100
80
60
40
Softening
BMHAZ WM HAZ BM
Maximum hardness
Hmax
aCeqb
a and b are constants that depend on joint conditions.
Carbon equivalent
Si Mn Ni
Cr Mo V
Ceq
C
6
40
5
4
24
14
100
400
Blow hole
350
300
200
0.4 0.5 0.6
Ceq(%)
0.7
40
20
AC1720C
AC3840C
Cause
250
0.3
60
AC1720C
AC3840C
200 400 600 800 1000 1200 1400
Maximum heating temperature C
Defect
0.2
80
450
150
120
Defect
0.8
Cause
1Excessive hydrogen in the arc atmosphere
2Great quenching ability of the base metal
500
Maximum hardness(Hv98N)
Hardness
(Hv)
140
550
Hardness
(Hv)
120
B. Hardening of HAZ
Non-heat treated
steel plate
Hardening
20
Base material
Measured
points
TS 590N/mm2class
Remarks
Absorbed energyJ/cm2
Fusion zone
Range of heating
temperature (Approx.)
Fusion zone
Structural
type
Absorbed energyJ/cm2
Maximum heating
temperature
HAZ cracking
Excessive PCM:
PCMC
Si Mn Cu Ni Cr Mo V
5B
30 20 20 60 20 15 10
Degradation in
ductility and notch
brittleness of
deposited steel
Degradation in
ductility and notch
brittleness of base
metal HAZ
Linear structure
38
39
Pc =C+Si/30+Mn/20+Cu/20+Ni/60+Mo/15+V/10+5B+K/40000+H60
=PCM+K/40000+H/60
=PCM+t/600+H/60 (in case of y-groove weld cracking test)
Here K: Restraint intensity factor (kgf / mmmm)
t: plate thickness (mm)
H: Diffusible hydrogen content of the weld metal (glycerin method) (cc/100g)
Fig. 10 shows the relationship between the parameters in Pc and
low-temperature cracking behavior. We can see that precise prediction
of low-temperature cracking behavior is made possible by the
Pcformula.
In actual welding, preheating and post-heating are performed to
prevent weld cracking. JIS Z3138Oblique y-groove weld cracking
testis commonly used to determine the temperature for the above.
The preheating temperature, which is determined by this test, and
the PC formula have a good relationship, as shown in Fig. 11, and its
mathematic representation is as follows.
T0 = 1440 Pc-392 (3)
T0: Preheating temperature for prevention of cracking (C)
Generally speaking, the reduction of preheating and post-heating with
consideration for the actual construction period and cost aspects is a
major need of customers. The way to meet this need is to reduce the
PCM of the steel, i.e., the amount of carbon and other alloying elements
added, while satisfying the various characteristics that are required.
At present, the technique used as the means to achieve the above is
TMCP, which makes it possible to achieve high strength with a small
amount of alloying elements. TMCP is applied in a wide variety of fields
in which the reduction of preheating and post-heating is demanded.
Transverse
crack
Underbead crack
Longitudinal crack
Root crack
Longitudinal crack
Sulfur crack
Sulfur band
Crater crack
Longitudinal
crack
Star type
Longitudinal
type
Crater
cracks
Transverse
type
When the material is magnetized, magnetic arc blow is caused in cases of direct current welding,
making it difficult to perform welding. While this is not a problem with ordinary 400 to 490 N/mm2
class steel plates, steel with high nickel content is easily magnetized, and the occurrence of magnetic
arc blow can become marked with 780 and 950 N/mm2 class steel plates and 9% nickel steel.
Countermeasures for the occurrence of magnetic arc blow during welding at the job site are shown
below.
Transverse
crack
Root crack
There are two kinds of weld cracks. One is low-temperature cracks that
occur at a comparatively low temperature and the other is high-temperature cracks that occur during melting and solidification. Low-temperature cracks include underbead cracks, root cracks, and transverse
micro-cracks in the weld metal. Though they rarely occur in low-carbon
steel, they easily do in high-carbon steel, so even low alloy steels call for
special caution. They are caused due to chemical composition (especially the carbon equivalent) in view of material, therefore, weld cracks
are associated with the extent of hardening and the base metal
s heattreatment, resulted from welding. Weld heat input, hydrogen embrittlement, residual stress, and stress concentration also affect weld cracks.
For this reason, it is important to give proper preheating and postheating
treatments, use low-hydrogen electrodes, and consider constraint conditions for welding.
On the other hand, as the carbon content increases, high-temperature cracks tend to occur easily. They typically occur at starting points
of beads and in the crater zone.
Low-temperature cracking is a type of delayed fracture that occurs
when hydrogen diffusing from the weld metal acts on the hardened
zone, to which strong restraint stress is being applied as a result of the
fact that thermal contraction during welding is prevented. Therefore,
the prevention of low-temperature cracking requires comprehensive
consideration of three parameters: weld hardenability of base metal,
intensity of restraint and the amount of diffusible hydrogen. The
weld cracking parameter (Pc) shown below is commonly used to
predict low-temperature cracking.
Arc blow
100
90
80
70
60
50
40
30
20
10
0
Arc blow
0.1
0.2
0.3
0.4
0.5
Pc= C + Si + Mn + Cu + Ni + Mo + V + 5B + t + H
30 20 20 60 15 10 600 60
Fig. 11 Relationship between Pc and preheating temperature
200
Preheating temperatureC
A. Weld Crack
Cross section
crack ratio
150
No cracking
100
50
B. Notch Toughness
Notch toughness can be substantially controlled by proper welding
work. In view of materials, it is adversely affected by carbon-equivalent-dependent weld hardening and embrittlement that are caused by
entry of hydrogen, nitrogen and oxygen. Moreover, some steel plates
including appropriate amounts of V, Al, Ni, etc. improve in toughness
to a considerable extent due to increasingly refined grain.
40
0.2
0.3
0.4
0.5
Pc= C + Si + Mn + Cu + Ni + Mo + V + 5B + t + H
30 20 20 60 15 10 600 60
41
4. Lamellar Tear
In recent years, as steel structures have become larger and more complicated, welded joints with
strict restrictions in terms of structure, function or appearance have been employed in various fields,
and there is an increasing number of cases in which greater tensile stress is applied in the throughthickness -direction.
The neighboring section of the gas-cut surface of a steel plate sometimes becomes harder than the
other sections due to the quenching effect. The greater the carbon equivalent, the greater the hardenability as is the case with high tensile strength steel plates and atmospheric corrosion-resistant steel
plates.See paragraphs concerning welding.
Some examples of NSSMC
s examination results on hardening due to gas cutting are shown below. It
is understood that the hardened section is at most within 3mm from the cut face. Such hardening does
not matter in regular bending or cutting work. The thick steel plates manufactured by our company
have good workability, so the harmful effects caused by gas cutting are minimal and the plates can be
used with peace of mind. If heating is conducted before or after the gas cutting, to soften the plates, the
workability and cutability are further improved.
Fig. 13 The relationship between the reduction of area of the throughthickness direction z and the quantity of S (from WES3008-1999)
80
70
Tensile stress
60
Lamellar tear
50
25mm
Vickers hardnessHv98N
300
Air-cooled or water-cooled
cut face
200
2
Crater:
Cutting oxygen: 0.5 MPa
Acetylene:
0.02 MPa
Cutting speed: 300mm/min
40
100
30
10
11
12
20
10
0
0 2
8 10 12 14 16 18 20 22 24 103
350
Table 3: The reduction of area of the through-thickness direction of the anti-lamellar tear steel according to JISG3199
Class No.
Average
Individual
Z15S
Over 15%
Over 10%
0.010 or less
Z25S
Over 25%
Over 15%
0.008 or less
Z35S
Over 35%
Over 25%
0.006 or less
Quantity of S (%)
Applied by agreement
between the parties
to the transfer.
32mm
Vickers hardnessHv98N
300
250
4
Crater:
Cutting oxygen: 0.8 MPa
Acetylene:
0.04 MPa
Cutting speed: 250mm/min
200
Remarks: The rating refers to The Japan Welding Engineering Society specifications WES3008.
The indication of S by the Class No. is given if S content is specified.
100
42
5 6 7 8 9 10 11 12 13 14 15
Distance from gas-cut facemm
43
100
60
44
Burr
20
Broken-out plane
Burr
10
15
20
ing
oll ion
r
t t
Ho irec
d
Shearing section
Shear plane
ing
ck
End face
cracking
Clearancethickness
a
Cr
40
Orientation of
shear plain
Inward Outward
80
Percent defective
Bending
direction
The bend radius must be greater than the minimum bend radius
of a steel plate. The minimum bend radius is a specific property
determined by the thickness and quality of a steel plate. It can
be said that the smaller the minimum bend radius, the better the
workability of the steel plate. Moreover, the greater the thickness
of the steel plate, the greater the minimum bend radius. Thus,
thick steel plates are more difficult to bend than thin steel plates.
The steel plates produced by Nippon Steel & Sumitomo Metal
are manufactured to be especially easy to form, so our steel
sheets have an outstanding reputation in the industry. Of course,
there is a limit to formability according to the forming method
used. Should your product require severe forming, please consult
your sales representative in advance to ensure the best match of
steel plates for your intended purpose.
Usually, when a plate is bent by 180 in the direction at a right
angle to the rolling directionFig. 17
, the minimum limit of bend
radius is twice the plate thickness for plates of not more than
25mm in thickness, and three times the plate thickness for plates
of 2550mm in thickness. The minimum bend radius has something to do also with width size, and the wider the steel plate, the
more difficult the bending. However, when it comes to steel plates
with width 810 times or more than their thickness, the effect of
width size can be neglected, so it is generally not necessary to
consider this factor.
45
Si
Mn
P
S
Cu
Cr
Ni
Mo
C
0.14
0.34
1.40
0.018
0.013
0.07
0.03
0.02
0.01
Air cooling and water coolingat water temperature of 10Cafter heating for 1 hour
Base metal
Air-cooled
Water-cooled
1000
800
V
0.07
Sol.Al
0.04
160
Absorbed energy vEoJ
Tensile strength
(N/mm2)
600
1000
Yield point
(N/mm2)
Elongation
( )
800
600
400
40
140
120
100
80
60
40
20
20
Base 500
metal
600
700
800
Heating temperatureC
900
Base 500
metal
600
700
800
Heating temperatureC
900
C. Example 3: Results of heating tests on WEL-TEN 590 steel plates32mm plate thickness
Chemical composition%
Treatment
A. Example 1: Results of heating tests on steel plates of YP355 N/mm2 class32mm plate thickness
Si
Mn
P
S
Cu
Nb
C
0.15
0.03
1.34
0.012
0.015
0.07
0.03
Air cooling and water coolingat water temperature of 10Cafter heating for 1 hour
Base metal
Air-cooled
Water-cooled
400
400
300
40
160
140
120
100
80
60
40
30
20
600
700
800
Heating temperatureC
900
20
Base 500
metal
600
700
800
Heating temperatureC
900
Tensile strength
(N/mm2)
160
Absorbed energy vEoJ
500
Base metal
Air-cooled
Water-cooled
700
500
700
40
500
300
20
0
140
120
100
80
60
40
Base metal
Air-cooled
Water-cooled
20
Base 500
metal
600
700
800
Heating temperatureC
Sol.Al
0.02
Base metal
Air-cooled
Water-cooled
900
Yield point
(N/mm2)
180
Base 500
metal
46
Tensile strength
(N/mm2)
500
Elongation
( )
600
Yield point
(N/mm2)
Elongation
()
Chemical composition%
Treatment
Si
Mn
P
S
Cu
Cr
Ni
Mo
C
0.12
0.32
1.25
0.018
0.017
0.07
0.06
0.53
0.12
Air cooling and water coolingat water temperature of 10Cafter heating for 1 hour
900
Base 500
metal
600
700
800
Heating temperatureC
900
47
We will recommend that we have at first you grasp the outbreak situation as a way of thinking of local corrosion end run. Please have you examine the reasonable measures that you matched with the situation, and
reference carry out the factor / measures map which we will show in a list shown below later.
Measures
Factor
Sea water
Water & Salts
Rain
Cover
Rain
Indoor safe
keeping
Water
generation
Distance security
from the shore
Seawater
+ Salt
Wet
Prevention
Factor
exclusion
Concrete pavement
Temperature difference
between steel plates
and air
Sunshine
Humidity
Absorption to gaps
Saltsdeliquescence
Water
Long-term
safekeeping
evasion
Difference of temperature
reduction
A safekeeping place change
Wind
Dew
condensation
Drying up
Drying
Water condition on plate veries on climate, season, surroundings, time and so forth.
48
Prevention of rust
Ventilation
Painting
49
Storage conditionOutdoor
Water pool
200mm
Enlargement
Cross section of microstructure
General corrosion
Move
Steel
Mechanism
Nucleation site of corrosion
Feature
Overall corrosionAfter shot blast
50
51
Strength Level
T.S. N/mm2 Nippon Steel & Sumitomo
JIS
Metal Specifications
330 or over
G 3101 SS300
A283 Gr.B, C
G 3101 SS400
G 3106 SM400A
A572 Gr.42
A633 Gr.A
G 3106 SM400B
A573 Gr.58, 65
G 3106 SM400C
A529 Gr.50, 55
G 3106 SM490A, B, C
A573 Gr.70
G 3106 SM490YA, YB
G 3106 SM520B, C
G 3140 SBHS400
A572 Gr.50, 60
A633 Gr.C, D
WEL-TEN540
400 or over
490 or over
A572 Gr.65
A633 Gr.E
A678 Gr.B
590 or over
WEL-TEN590
G 3106 SM570
G 3140 SBHS500
685 or over
WEL-TEN690
WEL-TEN780
WELTEN950
G 3128 SHY685N, NS
G 3140 SBHS700
A678 Gr.C
A514 Gr.AT
A517 Gr.AT
BS EN
BS EN10025
Gr.S355J0, J2G3
BS EN10025
Gr.S355J2G4
K2G3K2G4
BS EN10025
DIN17100, St601, 2
Gr.E335
DIN17100, St702
BS EN10025
Gr.E360
ISO
ISO R630 Fe33
Fe37A, B, C, D
ISO R630 Fe42A, 44A
ISO R630 Fe42B, 44B
ISO R630 Fe42C, 44C
ISO R630 Fe42D, 44D
52
340
JIS
ASTM
A285 Gr.A
A285 Gr.B
205
380
A285 Gr.C
295
520
A299
Standards
DIN & VDEh
DIN17155HI
DIN17155HII
205
380
225
410
G 3103 SB410
A515 Gr.60
245
450
G 3103 SB450
A515 Gr.65
DIN17155 19Mn6
DIN17155HII
Si Killed
DIN17155HIII
Si Killed
DIN1715517Mn4
265
480
G 3103 SB480
A515 Gr.70
DIN1715519Mn6
BS EN
ISO
BS EN10028
Gr.P275N, H
BS EN10028
Gr.P275N, H
205
380
A516 Gr.55
DIN17155HII
225
410
G 3118 SGV410
A516 Gr.60
DIN17155HIII
ISO 2604/IV P 7
245
450
G 3118 SGV450
A516 Gr.65
DIN1715517Mn4
ISO 2604/IV P 11
265
480
G 3118 SGV480
A516 Gr.70
DIN1715519Mn6
205
380
225
410
G 3115 SPV235
345
480
G 3115 SPV355
DIN1715519Mn6
355
450
345
560
415
550
G 3115 SPV410
DIN17155HII
VDEhW680 TTSt41
DIN17155HII
VDEhW680 TTSt45
BS EN10028
Gr.P275N, H
BS EN10028
Gr.P275N, H
BS EN10028
Gr.P355N, NH
BS EN10028
Gr.P355M, MH
ISO 2604/IV P 5
ISO 2604/IV P 16
Strength LevelN/mm2
Y.P.
T.S.
JIS
G 3103 SB450M
255
450
275
440
275
480
G 3103 SB480M
295
520
315
520
G 3119 SBV1A
G 3119 SBV1B
345
550
G 3119 SBV2
G 3119 SBV3
225, 315
380, 480 G 4109 SCMV1
225, 275
380, 450 G 4109 SCMV2
G 4109 SCMV3
245, 315
410, 520
G 4109 SCMV4
G 4109 SCMV5
G 4109 SCMV6
205, 315
410, 520
Y.P.
T.S.
235
275
295
325
325
400
400
400
440
450
350
JIS
A737 Gr.B, C
A662 Gr.A
A662 Gr.B
A537 Cl.1
A841 Cl.1
480
490
610
670
450
490
450
490
690
G 3126 SLA365
G 3127 SL2N255
G 3127 SL3N255
G 3127 SL3N275
G 3127 SL9N520
A662 Gr.C
A203 Gr.A
A203 Gr.B
A203 Gr.D
A203 Gr.E
A353
A553
A841 Grade G
A844
A533 Type B Cl.1
A533 Type B Cl.2
A533 Type B Cl.3
A543 Type B, C Cl.1
A543 Type B, C Cl.2
A543 Type B, C Cl.3
NTUF 365
NTUF 490
NTUF 570
G 3120 SQV2A
G 3120 SQV2B
ASTM
365
365
490
570
255
275
255
275
520
480, 550
21/4Cr1Mo
550
620
690
725
795
620
345, 430
3Cr1MoV NT
345
480
570
585
690
485
450
355
G 3115 SPV450
570
G 3127 SL7N590
G 3127 SL9N590
450
ISO 2604/IV P 30
Mn1/2Mo1/2Ni
Mn12/Mo3/4Ni
ISO 2604/IV P 33 2/3Cr1/2Mo
DIN17155 13CrMo44 BS EN10028 Gr.13CrMo45 ISO 2604/IV P 32 1Cr1/2Mo
11/4Cr1/2Mo
WSN7380 10CrMo9 10 BS EN10028 Gr.11CrMo910 ISO 2604/IV P 34 21/4Cr1Mo
3CrMo
WSN7380 12CrMo19 5
5Cr1/2Mo
7Cr1/2Mo
9Cr1Mo
490
NTUF 295
NTUF 325
690
G 3126 SLA235A, B
G 3126 SLA325A, B
590
BS EN10028 Gr.16Mo31/4Mo
Remarks
ISO
ISO 2604/IV P 28 1/2 Mo
Mn1/2Mo
Mn1/2Mo3/4Ni
Mn1/2Mo1/2Ni
21/4Cr1Mo QT
21/4Cr1MoV NT
Standards
Nippon Steel & Sumitomo
Metal Specifications
DIN17155 15Mo31/4Mo
WSN5423 16Mo5
Strength LevelN/mm2
500
BS EN
420
A204 Gr.B
A204 Gr.C
A302 Gr.A
A302 Gr.B
A302 Gr.C
A302 Gr.D
A387 Gr.2 Cl.1, 2
A387 Gr.12 Cl.1, 2
A387 Gr.11 Cl.1, 2
A387 Gr.22 Cl.1, 2
A387 Gr.21 Cl.1, 2
A387 Gr.5 Cl.1, 2
570
690
A533 Type A Cl.3
345
550
G 3120 SQV3A
A533 Type C Cl.1
480
620
G 3120 SQV3B
A533 Type C Cl.2
570
690
A533 Type C Cl.3
585, 690
725, 795
A542 Cl.1, 2
515, 415
655, 585
A542 Cl.3, 4a
A612
BS EN10028
Gr.P420M, MH
BS EN10028
Gr.P460N, NH
Standards
DIN & VDEh
WSN5423 16Mo5
ASTM
A204 Gr.A
BS EN
ISO
BS EN10028
Gr.P355NL1, NL2
Remarks
BS EN10028
Gr.P355ML1, ML2
ISO 2604/IV P 16
ISO 2604/IV P 44
BS EN10028
ISO 2604/IV P 45
VDEh W680 X8Ni9 Gr.X8Ni9HT690
X7Ni9
21/4Ni
31/2Ni
31/2Ni
9NiN Type
9NiQT Type
Mn1/2Mo12/Ni
3Ni13/4Cr
1/2Mo
53
Strength LevelN/mm
Y.P.
T.S.
Corresponding
Grade
ASTM
235
400/490
A131
D
E
Y.P.
265
315
355
390
T.S.
400/510
470/590
490/620
530/650
Corresponding
Grade
ASTM
A131
A131
A131
NK
Japan
AB
USA
LR
UK
BV
GL
NV
France Germany Norway
CR
Taiwan
RS
Russia
KR
ROK
CCS
China
NP3600N
NP4100N CP1410
KRP42
NP4600N CP1450
KRP46
NP4900N C36E
P36E
KR36E
CS36E
AB
USA
LR
UK
KAM
AAM
LAM
BAM
GAM
NAM
CAM
165
310/450
A285 Gr.A
APMA
KAS
AAS
LAS
BAS
GAS
NAS
CAS
PAS
KRAS CSAS
185
345/485
A285 Gr.B
APMB
KAK
AAK
LAK
BAK
GAK
NAK
CAK
PAK
KRAK CSAK
205
380/515
A285 Gr.C
APMC
KAN
380/520
APMD
LP360, AR
KBS
ABS
LBS
BBS
GBS
NBS
CBS
PBS
KRBS
205
KBK
ABK
LBK
BBK
GBK
NBK
CBK
PBK
KRBK
225
410/550
A515 Gr.60
KP42
APME
LP410, AR
KBN
245
450/590
A515 Gr.65
KP46
APMF
LP460, AR
LDS
BDS
PDS
265
480/620
A515 Gr.70
KP49
APMG
KDK
ADK
LDK
BDK
GDK
NDK
CDK
PDK
KRDK CSDK
KDN
AND
LDN
BDN
GDN
NDN
CDN
PDN
KRDN CSDN
KEN
AEN
LEN
BEN
GEN
NEN
CEN
PEN
KREN CSEN
CCS
China
Steel Type: Rolled Steel Plate for HullsHigh Tensile Strength Steel
Strength LevelN/mm2
NK
Japan
NK
Japan
AB
USA
LR
UK
BV
GL
NV
CR
RS
KR
France Germany Norway Taiwan Russia ROK
CCS
China
N27A
N27D
N27E
AH32
K32A
L32A
B32A
G32A
N32A
C32A
DH32
K32D
L32D
B32D
G32D
N32D
C32D
EH32
K32E
A32A
A32D
A32DN
A32E
L32E
B32E
G32E
N32E
C32E
AH36
K36A
DH36
K36D
EH36
L36A
B36A
G36A
N36A
C36A
L36D
B36D
G36D
N36D
C36D
K36E
A36A
A36D
A36DN
A36E
L36E
B36E
G36E
N36E
C36E
AH40
K40A
A40A
L40A
N40A
DH40
K40D
A40D
L40D
N40D
EH40
K40E
A40E
L40E
N40E
205
380/520
A516 Gr.55
APK
LLT0360
LP360FG
BP360
NP3601FN
NP4101FN
225
410/550
A516 Gr.60
APL
LP410FG
BP410
NP4601FN
245
450/590
A516 Gr.65
APM
LP460FG
BP460
NP4901FN CP2450
265
480/620
A515 Gr.70
APN
LP490FG
BP510
NP5101FN CP2480
235
410/510
G 3115 SPV235
KPV42
LLT0410
NP4101FN CPV0235
KRPV24
315
490/610
G 3115 SPV315
KPV32
LLT20410
NP4601FN CPV0315
KRPV32
355
520/640
G 3115 SPV355
KPV36
LLT0490
NP4901FN CPV0355
KRPV36
LLT20490
NP5101FN CPV0450
KRPV46
450
570/700
G 3115 SPV450
KPV46
490
610/740
G 3115 SPV490
KPV50
A204 Gr.A
KPA46
APH
BPM430
A204 Gr.B
KPA49
API
BPM510
APJ
1/2Mo
KRPV50
NPM440
KRP46A
KRP49A
0.3Mo
A204 Gr.C
BPMV510
2/3Cr1/2Mo
A387 Gr.2
BPCM450
1Cr1/2Mo
A387 Gr.12
LPCM470
BPCM470
NPCM470
11/4Cr1/2Mo
A387 Gr.11
21/4Cr1Mo
A387 Gr.22
LPCM480
BPCM480
NPCM480
3Cr1Mo
A387 Gr.21
5Cr1/2Mo
A387 Gr.5
CR
Taiwan
RS
Russia
KR
ROK
CCS
China
AB
USA
235
400/510
G 3126
SLA235A, B
KL24A, B ABV
325
440/560
G 3126
SLA325A, B
KL33
365
490/610
G 3126
SLA365
KL37
11/2 21/4Ni
31/2Ni
5Ni
9Ni
ABVH
LR
UK
BV
GL
NV
France Germany Norway
NL23,
24, 24L
KRL24A, B
LTEH32,
FH32
NL43,
44, 44L
KRL33
LTEH36,
FH36
KRL37
BLNA, BLNB
G 3127
SL2N255
KL2N30
11/2Ni BL1N
NLN1N
KRL2N30
G 3127
SL3N255, 275
KL3N32
31/2Ni BL3N
NLN3N
KRL3N32
G 3127
SL5N590
KL5N43
5Ni
BL5N
NLN5N
KRL5N43
G 3127
SL9N520
KL9N53
9Ni
BL9N
NLN9N
KRL9N53
G 3127
SL9N590
KL9N60
KRL9N60
1/2Ni
54
NK
Japan
55
NES540
SUMITEN540
WELTEN540
WELTEN590
SUMITEN590
WELTEN590
SUMITEN590K, 590M
WELTEN590E
WELTEN590RE
WELTEN590RE
WELTEN590H
WELTEN590CF
WELTEN590SCF
WELTEN610
WELTEN610CF
WELTEN610SCF
SUMITEN590F
SUMITEN590W
SUMITEN590LT
SUMITEN610
SUMITEN610F
WELTEN590EX
WELTEN590EXS
WELTEN610
WELTEN610EX
WELTEN610EXS
SUMITEN610W
SUMITEN610LT
WELTEN690
SUMIHARDK340
WELHARD400
WEL-TEN AR360E
SUMIHARDK400
ABREX400
WEL-TEN AR400E
SUMIHARDK450
ABREX450
WELHARD500
WEL-TEN AR500E
SUMIHARDK500
ABREX500
3Corrosion-resistant Steel
Old Nippon Steel
STEN1
STEN2
CR1A400
STEN1
STEN2
NAW400
CR2400
NAW400
NAW490
CR2490
NAW490
CR2/2M590
CORTEN
490A, B, C
CR2M490
CORTEN
490A, B, C
SUMITEN690
WELTEN690
CORTEN570
CR2M590
CORTEN570
SUMITEN690S, 690M
WELTEN690E
CORTEN A
CR4A400
CORTEN A
WELTEN690C
CORTEN B
CR2M490
CORTEN B
WELTEN690REA, B
WELTEN690RE
CORTEN C
CR2M590
CORTEN C
WELTEN690EX
CORTEN O
CR2RH
CORTEN O
SUMITEN730
SUMITEN730S
WELTEN780
WELTEN780A, B
SUMITEN780
WELTEN780
WELTEN780C
SUMITEN780S
WELTEN780C
WELTEN780E
SUMITEN780M, 780S
WELTEN780E
WELTEN780RE
WELTEN780RE
WELTEN780EX
WELTEN780EX
WELTEN780P
SUMITEN780SW
SUMITEN780W
WELTEN950
WELTEN950PE
WELTEN950RE
56
SUMITEN950
SUMITEN950M
WELTEN950
WELTEN950E
WELTEN950RE
MARILOY
S400A, B, C
CR4A400
MARILOY
S400A, B, C
MARILOY
G400A, B, C
CR4B400
MARILOY
G400A, B, C
MARILOY
P490A, B, C
CR4A490
MARILOY
P490A, B, C
MARILOY
S490A, B, C
MARILOY
G490A, B, C
MARILOY
T490A, B, C
MARILOY
S490A, B, C
CR4B490
MARILOY
G490A, B, C
CR4T490
MARILOY
T490A, B, C
NAWTEN
12400A, B, C
NAWTEN
12400A, B, C
NAWTEN
12490A, B, C
NAWTEN
12490A, B, C
NAWTEN12570
NAWTEN12570
NAWTEN
15400A, B, C
NAWTEN
15400A, B, C
NAWTEN
15490A, B, C
NAWTEN
15490A, B, C
NAWTEN15570
NAWTEN15570
NTUF295N
SLT285
NTUF295
NTUF325, 325N
SLT325A, 325B
NTUF325
NTUF365
SLT360
NTUF365
NTUF490
NTUF490
NTUF570
SLT3N440
SLT2N255
SLT3N255
SLT3N275
NTUFCR130
NTUFCR130
NTUFCR196
NTUF570
NTUFCR196
SLT9N520
SLT9N590
BTHT325B, 325C
TDAC325B, 325C
BTHT325B, 325C
BTHT355B, 355C
TDAC355B, 355C
BTHT355B, 355C
BTHT385B, 385C
TDAC385B, 385C
BTHT385B, 385C
BTHT400C
BTHT440B, 440C
SA440B, 440C
BTHT400C
BTHT440B, 440C
BTHT440BSP,
440CSP
BTHT440BSP,
440CSP
BTHT500C
BTHT500C
BTHT630B, 630C
BTHT630B, 630C
HSA700A, 700B
HSA700A, 700B
BTHT700A, 700B
SSS1000
BTHT880B, 880C
BTLYP100
SLY100
BTLYP100
BTLYP225
SLY225
BTLYP225
NSFR400B, 400C
NSFR400B, 400C
NSFR490B, 490C
NSFR490B, 490C
NSMIP1
SSM250
NSMIP250
57