HW8 Soln PDF

Chem 338
Homework Set #8 solutions

From Atkins:
October 30, 2001
8.1, 8.4, 8.8, 8.12, 8.17, 8.21, 8.24, 8.28, 8.29, 8.31 + 8.30
8.1) Write the proton transfer equlibria for the following acids in aqueous solution and
identify the conjugate acid-base pairs in each one:
a) H2SO4(aq) + H2O(l) H3O+(aq) + HSO4(aq)
Acid
Base
c.a.
c.b
b) HF(aq) + H2O(l) H3O+(aq) + F(aq)
Acid
Base
c.a.
c.b
+
c) C6H5NH3+(aq) + H2O(l) H3O (aq) + C6H5NH2(aq)
Acid
Base
c.a.
c.b
d) H2PO4-(aq) + H2O(l) H3O+(aq) + HPO42(aq)

Acid
Base
c.a.
c.b
e) HCOOH(aq) + H2O(l) H3O+(aq) + HCOO(aq)
Acid
Base
c.a.
c.b
f) NH2NH3+(aq) + H2O(l) H3O+(aq) + NH2NH2(aq)
Acid
Base
c.a.
c.b
8.4) Suppose that something had gone wrong in the Big Bang, and instead of ordinary
hydrogen there was an abundance of deuterium in the universe. There would be
many subtle changes in equilibria, particularly the deuteron transfer equilbria of
-15
heavy atoms and bases. The Kw for heavy water at 25C is 1.35x10 . (a) Write
the chemical equation for the autoprotolysis of D2O. (b) Evaluate pKw for D2O
+
at 25C. (c) Calculate the molar concentrations of D3O and OD in neutral
heavy water at 25C. (d) Evalulate the pD and pOD of neutral heavy water at
25C. (e) Find the relation between pD, pOD, and pKw(D2O).
+
a) D2O(l) + D2O(l) D3O (aq) + OD (aq)

-15
-15
b) given that Kw = 1.35 x 10 , pKw = log(1.35 x 10 ) = 14.87
+
c) Kw = [D3O ][OD ]
Chem 338 Homework #8
[D3O+] = [OD-] = 1.35 10 15 = 3.67 x 10-8 M

d) pD = log[D3O+] = log(3.67 x 10-8) = 7.44 (which = pOD)
+
e) Kw = [D3O ][OD ] and taking the log of both sides:
+
log Kw = log[D3O ] log[OD ]
pKw = pD + pOD = 14.87
8.8) (a) A sample of potassium acetate, KCH3CO2, of mass 8.4 g is used to prepare
250 mL of solution. What is the pH of the solution? (b) What is the pH of a
solution when 3.75 g of ammonium bromide, NH4Br, is used to make 100 mL of
solution? (c) An aqueous solution of volume 1.0 L contains 10.0 g of potassium
bromide. What is the percentage of Br ions that are protonated?
a) 8.4 g of KCH3CO2
1 mole
= 0.08558 moles
59.05 + 39.10
[CH3CO2] = 0.08558 mol/0.25 L = 0.3423 M

+
Acetate ion is the conjugate base of a weak acid (acetic) and K is essentially neutral
(conjugate acid of KOH), so the acetate ion will govern the pH of the solution
through:
CH3CO2(aq) + H2O(l) CH3COOH + OH(aq)
-10
Kb for this equilibrium is found from Table 8.1 under acetic acid to be 5.6 x 10
(or we could get Kb from Ka using the fact that KaKb=Kw)
Kb =
[CH3COOH][OH- ]
[CH3CO2 ]
x2
0.3423 x
x2
-5
if x << 0.34, then K b =

and x = 1.38 x 10 M = [OH ]
0.3423
NOTE: 1.38 x 10-5 really is much less than 0.34 approximation was valid
So, pOH = log[OH ] = 4.86
pH = 14.00 pOH = 9.14
b) 3.75 g of NH4Br
1 mole
= 0.03828 moles
18.04 + 79.91
[NH4+] = 0.03828 mol/0.10 L = 0.3828 M

+
Since NH4 is the conjugate acid of a weak base (NH3) and Br is the conjugate
+
base of a strong acid (HBr), the NH4 ion will govern the pH of the solution
through:
NH4+(aq) + H2O(l) H3O+(aq) + NH3(aq)
The Ka for this acid equilibrium can be found from Table 8.1 under NH3 (or
obtained from Kb as indicated in part a)
K a = 5.6 10
10
[H3O + ][NH3 ]
+
[NH4 ]
x2
=
0.3828 x
x2
+
-5
if x << 0.3828, then K a =
and x = [H3O ] = 1.46 x 10 M
0.3828
NOTE: 1.46 x 10-5 really is much less than 0.38
+
pH = log[H3O ] = 4.83
c) 10.0 g of KBr
Br is the conjugate base of a strong acid (HBr) and hence Kb ~ 0 and the fraction
that is protonated = 0
8.12) Calculate the pH, pOH, and fraction of solute protonated or deprotonated in the
following aqueous solutions: (a) 0.120 M CH3CH(OH)COOH(aq) (lactic acid),
-4
(b) 1.4x10 M CH3CH(OH)COOH(aq), (c) 0.10 M C6H5SO3H(aq)
(benzenesulfonic acid).
a) 0..120 M HLac (Lactic acid)
[ H3O + ][ Lac ]
x2
Ka =
=
0.120 x
[ HLac]
where Ka = 8.4 x 10
-4
If x << 0.12, [ H3O + ] = 0.120K a = 0.010 M

NOTE: this is only about 8% smaller than 0.12, hence the approximation is
borderline (5% is the accepted cutoff point). But well go with it
pH = log[H3O+] = 2.00 (solving the quadratic yields a pH of 2.02)
pOH = 14.0 pH = 12.0
fraction ionized =
0.010
= 0.083
0.120
b) 1.4 x 10-4 M HLac

as in part (a), if x << 1.4 x 10-4 then [ H3O + ] = 1.4 10 4 K a = 3.4 x 10-4 M
NOTE: the approximation is definitely not valid in this case. We have to solve the
quadratic equation.
K a K a 4( 1.4 10 4 )( K a )
[ H3O ] =
= 1.22 10 4 M
2
2
pH = 3.91
pOH = 10.09
fraction ionized =
1.22 10 4
1.4 10
= 0.87
c) 0.10 M C6H5SO3H
Ka = 0.20
Can we use our approximation?
Ka
[ HA]initial
= 1.4, which is >> than 0.05
So back to the quadratic eqn.:

2
K a K a 4( 0.10 )( K a )
[ H3O ] =
= 0.073 M
2
+
pH = 1.14
pOH = 12.86
fraction ionized =
0.073
= 0.73
0.10
8.17) The weak base colloquially known as Tris, and more precisely as
tris(hydroxymethyl)aminomethane, has pKa=8.3 at 20C and is commonly used to
produce a buffer for biochemical applications. At what pH would you expect Tris
to act as a buffer in a solution that has equal molar concentrations of Tris and its
conjugate acid?
The equilibrium is:
Tris + H2O TrisH+ + OH
[OH- ][ TrisH + ]
and K b =
[ Tris ]
or taking log of both sides and rearranging:
[ TrisH + ]
pOH = pK b + log
[ Tris ]
pKb = pKw pKa = 14.00 8.3 = 5.7
+
For the case when [Tris] = [TrisH ], pOH = pKb = 5.7
Thus, pH = 14 pOH = 8.3
8.21) A buffer solution of volume 100 mL consists of 0.10 M CH3COOH(aq) and 0.10
M NaCH3CO2(aq). (a) What is its pH? (b) What is the pH after the addition of
3.3 mmol NaOH to the buffer solution? (c) What is the pH after the addition of
6.0 mmol HNO3 to the initial buffer solution?
For a 100 mL buffer solution that has [HAc]=0.10 M and [NaAc]=0.10 M,
[H3O + ][Ac ]
a) K a =
[HAc]
or likewise, pH = pK a log
pH = 4.75 log
0.10
= 4.75
0.10
for HAc + H2O H3O+ + Ac

[HAc]
[Ac ]
where the pKa of acetic acid = 4.75
b) add 0.033 moles of NaOH

initial moles of HAc : 0.10 M x 0.100 L = 0.01 moles HAc
initial moles of Ac : 0.10 M x 0.100 L = 0.01 moles of Ac
Addition of strong base will shift the equilibrium to the right:
pH = 4.75 log
0.01 0.0033
= 5.05
0.01 + 0.0033
(note that in the log term the volumes cancel out in the molar concentrations so
that we can just use moles)
c) add 0.0060 moles of HNO3
addition of strong acid will shift the equilibrium to the left:
pH = 4.75 log
0.01 + 0.0060
= 4.15
0.01 0.0060
8.24) Calculate the pH of (a) 0.15 M NH4Cl(aq), (b) 0.15 M NaCH3CO2(aq), and
(c) 0.150 M CH3COOH(aq)
NH4+ + H2O H3O+ + NH3
a) for a solution of 0.15 M NH4Cl:

K a = 5.6 10
10
[H3O + ][NH3 ]
[NH4+ ]
x2
=
0.15 x
if x << 0.15, [H3O + ] = 0.15 K a = ( 0.15)( 5.6 10 10 ) = 9.17 10 6 M

(note approximation was valid)
pH = 5.04
b) for a solution of 0.15 M NaCH3CO2:
K b = 5.6 10
10
[CH3COOH][OH- ]
[CH3COO- ]
x2
=
0.15 x
if x << 0.15, [OH ] = 0.15 K b = ( 0.15)( 5.6 10 10 ) = 9.17 10 6 M

(note approximation was valid)
pH = 14.00 + log[OH] = 8.96
c) for a solution of 0.150 M CH3COOH (HAc):

As in part (a), [H3O + ] = 0.150 K a = ( 0.150 )(1.8 10 5 ) = 0.0016 M
pH = 2.78
8.28) Write the expression for the solubility constants of the following compounds:
(a) AgI, (b) Hg2S, (c) Fe(OH)3, (d) Ag2CrO4.
+
+
a) AgI Ag + I ; Ksp = [Ag ][I ]
2+
22+
2b) Hg2S Hg2 + S ; Ksp = [Hg2 ][S ]
c) Fe(OH)3 Fe
3+
+ 3OH ; Ksp = [Fe3+][OH]3
d) Ag2CrO4 2Ag+ + CrO42- ; Ksp = [Ag+]2[CrO42-]
8.29) Use the data in Table 8.4 to estimate the molar solubilities of (a) BaSO4, (b)
Ag2CrO4, (c) Fe(OH)3, (d) Hg2SO4 in water.
a) For the molar solubility of BaSO4:
Ksp = 1.1 x 10
10
= [Ba2+][SO42-]
S = 1.1 10 10 = 1.0 10 5 M
b) Ag2CrO4
9 x 10
12
Ksp = 9 x 1012 (Handbook of Chemistry and Physics)

= [Ag+]2[CrO42] = (x)(2x)2 = 4x3
9 10 12
x=S=
= 1.3 10 4 M
c) Fe(OH)3
Ksp = [Fe3+][OH]3 = 2.0 x 1039 = (x)(3x)3 = 27x4
2.0 10 39
x=S=
27
d) Hg2SO4
= 9.3 10 11 M
Ksp unknown..
8.31) Thermodynamic data can be used to predict the solubilities of compounds that
would be very difficult to measure directly. Calculate the solubility of
mercury(II) chloride in water at 25C from standard Gibbs energies of formation.
HgCl2(s) Hg2+(aq) + 2Cl(aq)
Gro = (164.40) + 2( 131.23) ( 178.6) = 80.54 kJ / mol
Gro = RT ln K
80.54 10 3
Gro
K sp = K = e RT = e (8.31451)(298) = 7.64 10 15
2+
2
2
3
Ksp = [Hg ][Cl ] = (x)(2x) = 4x
7.64 10 15
x=S=
= 1.24 10 5 M
8.30) Use the data in Table 8.4 to estimate the solubility of each sparingly soluble
substance in its respective solution: (a) silver bromide in 1.4x10-3 M NaBr(aq),
-5
(b) magnesium carbonate in 1.1x10 M Na2CO3(aq), (c) lead(II) sulfate in
-5
0.10 M CaSO4(aq), (d) nickel(II) hydroxide in 2.7x10 M NiSO4(aq).
-3
a) AgBr in 1.4 x 10 M NaBr
Ksp = 7.7 x 10
-13
= [Ag+][Br]
3
= (x)(x + 1.4 x 10 )
3
x (1.4 x 10 )
-13
3
-10
x = 7.7 x 10 /1.4 x 10 = 5.5 x 10 M
-5
b) MgCO3 in 1.1 x 10 M Na2CO3
Ksp = 1.0 x 10-5 = [Mg2+][CO32-]
1.0 x 10-5 = (x) (x + 1.1 x 10-5)

-5
-5
2
If x >> 1.1 x 10 , 1.0 x 10 = x
x = 0.003 M (which indeed is much larger than 1.1 x 10-5)

c) PbSO4 in 0.10 M CaSO4
Ksp = 1.6 x 10-8 = [Pb2+][SO42-] (x)(0.10) (assuming x << 0.10)
-7
x = 1.6 x 10 M
-5
d) Ni(OH)2 in 2.7 x 10 M NiSO4
Ksp = 6.5 x 10-18 = [Ni2+][OH]2 = (x + 2.7 x 10-5)(2x)2

if x << 2.7 x 10-5 , 6.5 x 10-18 = (2.7 x 10-5)4x2
x = 2.5 x 10-7 M (which is sufficiently less than 2.7 x 10-5)

HW8 Soln PDF

Uploaded by

Copyright:

Available Formats

HW8 Soln PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HW8 Soln PDF

Uploaded by

Copyright:

Available Formats

Chem 338

Homework Set #8 solutions

October 30, 2001

d) H2PO4-(aq) + H2O(l) H3O+(aq) + HPO42(aq)

at 25C. (c) Calculate the molar concentrations of D3O and OD in neutral

a) D2O(l) + D2O(l) D3O (aq) + OD (aq)

Chem 338 Homework #8

[D3O+] = [OD-] = 1.35 10 15 = 3.67 x 10-8 M

pKw = pD + pOD = 14.87

[CH3CO2] = 0.08558 mol/0.25 L = 0.3423 M

if x << 0.34, then K b =

So, pOH = log[OH ] = 4.86

pH = 14.00 pOH = 9.14

Chem 338 Homework #8

[NH4+] = 0.03828 mol/0.10 L = 0.3828 M

Chem 338 Homework #8

If x << 0.12, [ H3O + ] = 0.120K a = 0.010 M

b) 1.4 x 10-4 M HLac

Can we use our approximation?

= 1.4, which is >> than 0.05

So back to the quadratic eqn.:

Chem 338 Homework #8

Tris + H2O TrisH+ + OH

Thus, pH = 14 pOH = 8.3

for HAc + H2O H3O+ + Ac

where the pKa of acetic acid = 4.75

Chem 338 Homework #8

b) add 0.033 moles of NaOH

a) for a solution of 0.15 M NH4Cl:

if x << 0.15, [H3O + ] = 0.15 K a = ( 0.15)( 5.6 10 10 ) = 9.17 10 6 M

if x << 0.15, [OH ] = 0.15 K b = ( 0.15)( 5.6 10 10 ) = 9.17 10 6 M

Chem 338 Homework #8

c) for a solution of 0.150 M CH3COOH (HAc):

+ 3OH ; Ksp = [Fe3+][OH]3

d) Ag2CrO4 2Ag+ + CrO42- ; Ksp = [Ag+]2[CrO42-]

Ksp = 9 x 1012 (Handbook of Chemistry and Physics)

Chem 338 Homework #8

Ksp = 1.0 x 10-5 = [Mg2+][CO32-]

Chem 338 Homework #8

1.0 x 10-5 = (x) (x + 1.1 x 10-5)

x = 0.003 M (which indeed is much larger than 1.1 x 10-5)

Ksp = 6.5 x 10-18 = [Ni2+][OH]2 = (x + 2.7 x 10-5)(2x)2

You might also like