SikaFast 5215 - PDS OK PDF

Product Data Sheet
Version Nos.: 05/13
SikaFast-5215 NT
Fast curing, two-part structural adhesive
Technical Product Data
Component A
Component B
SikaFast-5215 NT
SikaFast-5200
Acrylate
White
Black
Grey
Radical polymerisation
1.15kg/l approx.
1.5kg/l approx.
1.19kg/l approx.
Chemical base
Colour (CQP1 001-1)
Colour mixed
Curing mechanism
Density (CQP 006-4)
Density mixed (calculated)
Mixing ratio
by volume
by weight
10 : 1
10 : 1.3
Thixotropic paste
5 - 40C (40 - 105F)
5 min approx.
15 min approx.
90 approx.
50 approx.
10 MPa approx.
200% approx.
250 MPa approx.
10 MPa approx.
60C (F) approx.
-40 - 80C (-40 - 175F)
Consistency
Application temperature
Open time2 (CQP 526-2)
Fixture time2
time to reach 80% of final strength
Shore A hardness (CQP 023-1 / ISO 868)
Shore D hardness (CQP 023-1 / ISO 868)
Tensile strength2 (CQP 036-1 / ISO 37)
Elongation at break2 (CQP 036-1 / ISO 37)
E-Modulus2 (CQP 036-1 / ISO 37)
Tensile Lap-Shear Strength2 (CQP 046-6 / ISO 4587)
Glass transition temperature (CQP 509-1 / ISO 6721-2)
Service temperature
Shelf life3 (CQP 016-1)
1)
CQP = Corporate Quality Procedures
Description
SikaFast-5215 NT is a fast curing,
flexibilised
structural,
two-part
adhesive system, which is based
on Sikas Acrylic Double Performance (ADP) polymer technology.
Uncured SikaFast-5215 NT is a
pasty, non-sagging, hardly inflammable material which allows an
easy and precise application.
SikaFast-5215 NT is manufactured
in
accordance
with
ISO
9001 / 14001 quality assurance
system and the responsible care
program.
Fifteen (15) months
Cartridge 50 ml
2)
23C (73F) / 50% r.h.
3)
Stored at temperature below 25C (77F) and

not exposed to direct sun light
Product Benefits
- Strength development within
minutes after application
- Adhesion to a wide range of
substrates without or with limited
surface preparation
- High strength and impact resistance
- Solvent and acid free
- Lower odour than MMA containing products
- Easy mixing
Areas of Application
SikaFast-5215 NT is a fast curing,
flexibilised structural adhesive
designed to replace mechanical
fixings such as rivets, screws or
welding. It is suitable for high
strength fastening of concealed
joints and exhibits excellent adhesion on different types of substrates including top coats, plastics, glass, wood, etc.
This product is recommended for
professional experienced users
only. Tests with actual substrates
and conditions have to be performed to ensure adhesion and
material compatibility.
SikaFast -5215 NT 1 / 2
Properties
Cure Mechanism
SikaFast-5215 NT cures according
to radical chain polymerisation
when mixed with SikaFast-5200.
Open and fixture time are influenced by mixing ratio deviations as
well as temperature, e.g. as higher
the temperature as shorter the
open- and fixing time and vice
versa.
Chemical Resistance
SikaFast-5215 NT is resistant to
many chemicals. For specific information, contact the Technical
Department of Sika Industry.
Adhesion results
The following table summarises
lap-shear test results obtained with
different standard substrates. These results are indications only. Due
to the diversity of substrates, preliminary tests are mandatory.
Adhesion table (typical values)
Material
FM1
Value
AlMg3
C
10 MPa
Stainless steel C/A
8 MPa
El. galv. steel
C/A
10 MPa
Glass
C/A
9 MPa
ABS
S
8 MPa
PVC
C
10 MPa
PC
C
10 MPa
Table 1: Lap shear samples according to ISO
4587 bond line thickness 1.5 mm
1
Failure mode: Adhesive, Cohesive, Substrate
Method of application
Substrate preparation
Surfaces must be clean, dry and
free from grease, oil and dust.
Remove all loose particles or residues by cleaning it thoroughly. For
best adhesion performance pretreat the bonding area with Sika
Cleaner 205 prior to the bonding
process. Due to the diversity of
materials, preliminary tests with
original substrates are necessary.
Advice on specific applications is
available from the Technical Department of Sika Industry.
Application
SikaFast-5215 NT is applied with a
mixing ratio of 10 : 1 ( 10%) by
volume through a 24 elements
static mixer.
Consider that if applied in large
masses, heat is generated by the
exothermic reaction. To avoid
excessive temperature increase,
bond line thickness is limited to 3
mm, but must measure at least 0.5
mm. The mixed adhesive has an
open time of approx. 5 minutes
and achieves handling strength
(fixture time) in approx. 15
minutes. Optimum temperature for
the bonding process is between
15C and 25C. The approved
temperature range for substrates
and adhesive is between 5C and
40C. The influence of the reactivity by temperature changes has to
be respected.
After the open time has elapsed
the bonded parts must not be
moved against each other anymore. When the fixture time is
reached the parts can be moved if
no additional stress is distributed to
the bond line.
For additional information and
support in evaluation of the appropriate application equipment contact the Sika System Engineering
department of Sika Industry.
Removal
Uncured excess of SikaFast-5215 NT
can be removed easily before
curing with a dry wipe, with Sika
Remover 208 or another suitable
solvent. Once the adhesive is
cured it can only be removed mechanically.
Hands and exposed skin should be
washed immediately using a suitable industrial hand cleaner and
water. Do not use solvents!
Further Information
The Safety Data Sheet is available
on request.
Sika (NZ) Limited

PO Box 19192, Auckland 1746, NZ.
0800 745 269 | www.sika.co.nz
Packaging Information
Dual cartridge
50 ml
Value Bases
All technical data stated in this
Product Data Sheet are based on
laboratory tests. Actual measured
data may vary due to circumstances beyond our control.
Health and Safety Information
For information and advice regarding transportation, handling,
storage and disposal of chemical
products, users shall refer to the
actual Safety Data Sheets containing physical, ecological, toxicological and other safety related data.
Legal Notes
The information, and, in particular, the
recommendations relating to the application and end-use of Sika products,
are given in good faith based on Sika's
current knowledge and experience of
the products when properly stored,
handled and applied under normal
conditions in accordance with Sika's
recommendations. In practice, the
differences in materials, substrates and
actual site conditions are such that no
warranty in respect of merchantability
or of fitness for a particular purpose,
nor any liability arising out of any legal
relationship whatsoever, can be inferred either from this information, or
from any written recommendations, or
from any other advice offered. The user
of the product must test the products
suitability for the intended application
and purpose. Sika reserves the right to
change the properties of its products.
The proprietary rights of third parties
must be observed. All orders are accepted subject to our current terms of
sale and delivery. Users must always
refer to the most recent issue of the
local Product Data Sheet for the product concerned, copies of which will be
supplied on request.

SikaFast 5215 - PDS OK PDF

Uploaded by

Copyright:

Available Formats

SikaFast 5215 - PDS OK PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SikaFast 5215 - PDS OK PDF

Uploaded by

Copyright:

Available Formats

Product Data Sheet

Version Nos.: 05/13

CQP = Corporate Quality Procedures

Fifteen (15) months

23C (73F) / 50% r.h.

Stored at temperature below 25C (77F) and

Sika (NZ) Limited

You might also like