Promine AutoCAD Tips & Tricks Guide V6

PROMINE combines a highly usable AutoCAD integrated interface with powerful, industry-
focused modules in the areas of: Teamwork, Modeling, Engineering and Geology supporting all
aspects of the mining cycle from exploration to operation. Quickly create highly accurate
drawings with ease for: resource estimation, definition, modelling, shaft sinking, drift and raise
modelling, planning, ramp construction/excavation, stope design and sequencing, drill and blast
planning, capturing and processing survey data, material handling, scheduling, backfill design,
optimization, reporting and more.

Promine supports all mining methods such as: Open stope , Room and
pillar, Cut and fill, Block caving, Long hole, Shrinkage stoping and
Alimak Mining.

Find out what PROMINE can do for you or request a demo version at info@promine.com

Phone: 418.877.2769 Email: info@promine.com

Index
1. Select several objects with a common property 26. Insert Hyperlink into Object 51. Use BPOLY to Create Blasting Outlines

2. Customize your workspace 27. Manage Layers Using LAYWALK 52. Adjusting Hatch Transparency

3. Customize your viewports 28. The Oops Command 53. Sort Layers With LAYWALK Command

4. The Align command 29. The Burst Command 54. Time Saving Keyboard Shortcuts

5. Creating Blocks 30. Create a Customized Hide Object Shortcut 55. Divide and Measure Polylines

6. Displaying text in a hatch 31. Change Polyline Thickness 56. Array Command

7. Create angular dimensions larger than 180 32. Using the EXTRIM Command 57. Attribute Extraction

8. Double click actions customization 33. The Boundary Command 58. Revise Work With REVCLOUD

9. Carve a solid with a surface 34. Using Ribbon Shortcut Keys 59. Manipulate 3D Objects with Gizmo Tool

10. Using the Rename command 35. Quick Copy 60. XLINE and RAY Command

11. List Command 36. Organize Tabs and Panels

12. Repair Damaged Files 37. Print and Publish Multiple Layers

13. Using Coordinate Filters 38. Bring up Command line, Quick Calculator and Tool Palette

14. Build and Customize Tool Palettes 39. Bring up Command line, Quick Calculator and Tool Palette

15. Import X, Y Coordinates From Excel 40. The DWGPROPS Command

16. How to Convert or Change Units 41. Dimension & Annotation Settings

17. Draw an Arc With a Specific Length 42. OSNAP Keyboard Shortcuts

18. Insert JPEG into AutoCAD Drawing 43. Exploring Parametric Constraints (part 1)

19. Convert 3D Face to 3D Solid 44. Exploring Parametric Constraints (part 2)

20. Using AutoDESK Content Explorer 45. Exploring Parametric Constraints (part 3)

21. Export AutoCAD DWG to PDF 46. Helpful Drift Planning Commands

22. Add Solid Fill to Closed Objects 47. Generate Curves Using Fillet Command

23. 3D Mirror Command 48. Creating Flat Planes

24. Assign Matching Properties to Different Objects 49. Solid History Command

25. Sort Layers Using Group Filters 50. Hatch Using Tool Palette
1. Select several objects with a common property

Step by step

1. Go into the utility ribbon

2. Go into quick select
3. We will use color in this example
4. Select color
5. Define your operator, in this example =
6. Select the color of the objects you
want to select, in this example yellow
7. To change the color of the selected objects
8. Right click and go into properties
9. Change the color from yellow to blue

View tutorial video

2. Customize your workspace

Step by step

1. Type -toolbar in your AutoCAD command

prompt
2. Type the name of the toolbar you would like to
add to your workspace for example layers
3. Type the position you would like to display the
toolbar, in this example we will use top then
press enter to insert it at the new position, i.e
<0,0> coordinate. You can also use show
which will simply display the toolbar.
4. Note: Once you have a toolbar visible, right
clicking it will give you a dropdown menu
showing other toolbars.

View tutorial video

3. Customize shape viewports

Step by step

1. Go to layout in AutoCAD, any new

layout will have just one viewport
2. Go into paper space in the
bottom of your AutoCAD interface
3. Make one of the viewports smaller
by selecting the bottom right vertex
and dragging it to your desired size
4. Duplicate the viewport by selecting it
and using copy and paste from the clipboard
5. Create a polyline in the shape that
you want your viewport to look
6. Right click your viewport
7. Select viewport clip
8. Select your polyline
9. Your new polyline is now a viewport
10. Change to model space and adjust your view
within the viewport

View tutorial video

5. Creating Blocks

Step by step

1. Create a box with any dimensions

2. Go to create block under the insert tab
3. Choose a name for your block
4. Select your object that you would like to save
as a block
5. Press Enter
6. Specify the basepoint of your block/object for
future insertions
7. To insert a created block into your drawing
8. Go to your insert tab
9. Press insert and the recently saved block
should appear there

View tutorial video

6. Displaying text in a hatch

Step by step

1. In a given hatch, type Wipeout in your

AutoCAD command prompt
2. Draw a frame for your text within the hatch
3. The other option is using textmask
4. Create your text in the hatch
5. Type textmask
6. Select your text
7. The text is now cleared of any hatching
surrounding it

View tutorial video

7. Create angular dimensions larger than 180

Step by step

1. Type dimangular and the following options

should show up select circle, arc, line or
<specify vertex>
2. Press Enter to specify vertex
3. Select the vertex of your two lines
4. Select the ends of your two lines
5. The dimension of the angle should display

View tutorial video

8. Double click actions customization

Step by step

1. Go into the Manage tab

2. Go into the Customization Panel
3. Go into user interface
4. In the customize tab, right
click the double click actions node
5. Press on new double click action
6. Right click doubleclick1 and click rename,
enter your desired name
7. In the properties pane, enter
a description for the double-click action
8. In the command list pane,
drag the command you want
to add to the double click action
in the customizations into the
<file name> pane
9. Click apply

View tutorial video

9. Carve a solid with a surface

Step by step

1. Create a solid, in this example, a box

2. Create the surface you will use to carve the box,
(you can extrude an arc or line to create your
surface) I suggest creating a different layer with a
contrasting color for your surface.
3. Feel free to add more surfaces to cut your solid in
different shapes.
4. Using the Slice command (type it in)
5. At the object selection prompt, select your box or
other solid. Press enter to end your object
selection
6. At the specify starting point of slicing plane prompt,
choose the surface option then select the surface
you want to use for slicing.
7. Select the solid you wish to keep or keep both
sides. In this case we kept the larger portion of the
box
8. Repeat the process for other surfaces if you had
more than one. Then turn off the surface layer to
see your results. Below is the result of our
example. The video also demonstrates a separate
example.
View tutorial video
10. Using the Rename command

Step by step
1. Type rename in your AutoCAD command
prompt
2. Select object type to rename (Block, Dimstyle,
Layer, etc)
3. Enter the old object name
4. Enter the new object name
5. The new object should be renamed as desired

View tutorial video

11. List Command

Step by step
1. Create a line or if you already have an object in
mind then go to step 2
2. Type list in your AutoCAD prompt
3. Press Enter
4. Select your desired object
5. Press Enter

View tutorial video

12. Repair Damaged Files

Step by step
1. Open the file in question
2. Click on the top left red AutoCAD icon
3. Go into Drawing Utilities
4. Press the Audit Tool
5. Type in yes to carry out the auditing and fixing
errors in your drawing

View tutorial video

13. Using Coordinate Filters

Step by step
1. Split your viewports by clicking on the [-] in the top left of your
viewport
2. Go into viewport configuration list and select Two:Vertical
3. Keep your left viewport in top view and change your right
viewport into front view by clicking the S on your viewcube.
4. Use the 3DPOLY command and draw a random 3D polyline in
your left viewport
5. Notice how a straight line is drawn in your right viewport, this is
because the elevations (z-coordinate) are set to 0 in AutoCAD by
default (if you cant see your line in the right viewport, use the
zoom, extent commands to make it show up in the right viewport)
6. To make changes to your z coordinate, type in .xy then select
the x,y coordinate by clicking your mouse at the x,y coordinate
that you wanted or you could type in end to select an endpoint of View tutorial video
the line youve already drawn.
7. AutoCAD will then prompt you for the Z coordinate which you
can type in according to the elevation needed
8. You can repeat the same process for any other coordinate and
you can attach your coordinates to any of the objects in your left
viewport and then modify your Z when prompted.
9. You can also use filters (the .x .y .z commands) individually and
select those coordinates respectively using your cursor.
14. Build and Customize Tool Palettes

Step by step
1. Type TOOLPALETTES into your AutoCAD
command line, this will bring up a full menu of your
tool palettes.
2. To create a new palette right click on the right
side of the tool palette menu and press new
palette
3. To dock your tool palette click on the settings cog
on the left side of your tool palette and press
anchor left or right
4. To add new commands to your tool palette, press
on the palette that you have recently created.
5. Click on the settings cog on the left side of your
tool palette and in the menu that comes up press
on customize commands
6. Drag the commands from the customize View tutorial video
commands menu into your newly made palette.
15. Import X, Y Coordinates From Excel

Step by step
1. In Excel, highlight and Copy the column of X,Y
coordinates to be used to generate the drawing.
2. Open Windows Notepad (Start > All Programs >
Accessories > Notepad).
3. Before pasting the coordinates, type LINE as the
first word in the file (this will launch the Line
command when the script is run), then press
[Enter].
4. Now Paste the column of coordinates into the file
and you should see something like that shown in
the figure.
5. Close and save the .SCR file (remember where
you're saving it).
6. In AutoCAD, launch the SCRIPT command, then
navigate to where you saved your file in the
previous step, then select it and click Open. View tutorial video
AutoCAD will launch the Line command then,
beginning at the first set of coordinates entered, will
draw line segments from one point to the next.
16. How to Convert or Change Units

Step by step
1. Select one of the objects in your drawing
2. Type in the properties command to see the dimensions of your
selected object so you can compare it after the conversion is done
3. De-select any objects by pressing escape, Type in -dwgunits to
access the drawing unit conversion menu
4. Note that in your Command line what is written between the
angular quote brackets is your current unit system.
5. Select the unit system you would like to use, in our example we
are converting from <6> meters to <2> feet.
6. Select scientific or decimal for your Linear display format, in our
example we used decimal
7. Select your Linear display precision, in other words the number of
decimal places to display, we used the default of 4.
8. We will be scaling objects from other drawings upon insertion so
select <yes>
9. Match the units of the inserted objects by selecting <yes> View tutorial video
10. Scale the objects in the current drawing to reflect the change in
units <yes>
11. Include objects in paper space? <yes>
17. Draw an Arc With a Specific Length

Step by step
1. Draw an arc using the arc command
2. Type lengthen in your command prompt
3. Select an object to measure or
[DElta/Percent/Total/DYnamic]
4. In our example we will use Total then input your
arc length
5. This cuts the arc to fit the length we specify
6. Select your arc from the side that you want to
keep
7. Your new arc should be the length specified in
step 4

View tutorial video

18. Insert JPEG into AutoCAD Drawing

Step by step
1. Click the insert tab at the top of your AutoCAD
interface
2. Click attach in the reference ribbon
3. Browse and find your jpg file in your file explorer
4. Click on the file and press open
5. Another window should pop up asking you for
insertion coordinates, scale and angle of rotation, if
you check the specify on screen box it will be a lot
simpler to insert the image but you can also specify
those parameters manually, click ok to insert your
image.

View tutorial video

19. Convert 3D Face to 3D Solid

Step by step
1. Enter CONVTOSURFACE in the command line.
2. Select the face you want to convert.
3. Enter THICKEN in the command line.
4. Select the surface.
5. Enter a thickness value for the selected surface
in the command line.
6. When prompted, choose whether or not to erase
the defining surface.

View tutorial video

20. Using AutoDESK Content Explorer

Step by step
1. Go into your Add-ins ribbon at the top of your
AutoCAD window
2. Click on content explorer (the binocular icon)
3. Click on add watched folder and select the
folder that contains your AutoCAD drawings
4. Type the name of the object/layer/block that you
are searching for in the search bar
5. Right click on the objects to open up more
options such as insert, open drawing, go to file
location and so on.

View tutorial video

21. Export AutoCAD DWG to PDF

Step by step
1. Set up your view in the way you want your
drawing to appear in the pdf by using the view cube
or using the ORBIT command
2. Use the Plot command to bring up the plotting
window
3. Under Printer/plotter select DWG to PDF.pc3
4. In our example we used center the plot which
will make sure your drawing is centered or you can
offset it manually
5. After configuring these settings, press on Add
at the top and select the name you want for this
setup so you dont have to repeat these steps each
time.
6. Press OK
7. Choose a name for your file and then press
save
View tutorial video
22. Add Solid Fill to Closed Objects

Step by step
1. First set the layer that you want to use for your
solid fill. The hatch will go on the current layer.
2. On the Home tab in the Draw panel, click Hatch.
The Hatch Creation tab appears.
3. In the Pattern panel, choose Solid
4. If you have one closed area, you can just click
inside it to pick an internal point. If you want to
select an object, you can click Select in the
Boundaries panel, as you see here. Then press
Enter to end selection.
5. Press Enter to end the HATCH command.

View tutorial video

23. 3D Mirror Command

Step by step
1. Create a line that you would like to use as a mirror
2. Use the 3DMIRROR command
3. Select the object you want to mirror
4. Press Enter
5. Select from the list of options XY, YZ, ZX, 3 Points,
etc
6. Select 2 points on the line and then a third point
corresponding to the third plane
7. Your object should now be mirrored about the plane

View tutorial video

24. Assign Matching Properties to Different Objects

Step by step
1. Use the Matchproperties command
2. Select your source object(s)
3. Type in S and press enter to get into the
settings menu
4. Select the properties you want to match by
checking the respective boxes
5. Press Ok
6. Select your destination object(s)

View tutorial video

25. Sort Layers Using Group Filters

Step by step
1. Open your layer properties manager
2. Right click on All
3. Press New Group Filter or New Properties
Filter depending on how you want your layers
sorted
4. Once youve created the new group, drag the
layers you want to group into that filter
5. Right click the filter to turn the layers on/off or to
lock/unlock them

View tutorial video

26. Insert Hyperlink into Object

Step by step
1. Go into the Insert tab
2. Press hyperlink in the data ribbon
3. Select your object and press enter
4. Select the file or type in the web address you
would like the hyperlink to go to
5. To open the hyper link, right click on your object
and go into the hyperlink menu
6. Press the hyperlink to go to the file or webpage

View tutorial video

27. Manage Layers Using LAYWALK

Step by step
1. Insert layers into your drawing.
2. Use the LAYWALK command to bring up the Layer
walk pop up box.
3. Cycle through the layers one by one to see the
objects contained in each one.
4. Purge any layers you think might need a clean up.

View tutorial video

28. The Oops Command

Step by step
1. Delete an object
2. Make some edits to the drawing after deleting the
object
3. If you still need the deleted object, use the Oops
command to bring it back.

View tutorial video

29. The Burst Command

Step by step
1. Use the BURST command

2. Select the object/block that you want to break down

3. Press Enter

4. Your block/object is now separated into its

components while maintaining its attributes
View tutorial video
30. Create a Customized Hide Object Shortcut

Step by step
1. Type in cui to bring up the customize user interface
window
2. Press the Star icon to create a new command
3. Name your command Hide Objects
4. Type in HIDEOBJECTS in macro
5. Press Apply, then expand keyboard shortcuts and expand
shortcut keys
6. Drag the newly made command from the bottom left
window into shortcut keys
7. Select your newly made command and create a shortcut
key for it
8. Test out your new shortcut to make sure it works as
desired

View tutorial video

31. Change Polyline Thickness

Step by step
1. Draw a polyline to check if it has the desired
thickness
2. If not, type in PLINEWID
3. By trial and error determine which thickness you
would like to use, in the example we use 0.5
4. Your PLINE will remain that thickness throughout
the drawing

View tutorial video

32. Using the EXTRIM Command

Step by step
1. Use the EXTRIM command
2. Select the object you want to use as a border for your
trimming
3. Select the side of the object which you want to
remove
4. If you trimmed the wrong side, undo and select the
other side this time around

View tutorial video

33. The Boundary Command

Step by step
1. Draw overlapping objects, a rectangle and a circle
2. Type in the BOUNDARY command and press enter
3. Select the polyline option
4. Select the pick points option and select an internal
point
5. Press enter, this will create the new region at which
the objects overlap

View tutorial video

34. Using Ribbon Shortcut Keys

Step by step
1. Press Alt + H on your keyboard while in your AutoCAD
window
2. Keyboard shortcuts will appear next to each
command
3. Type in the keyboard shortcuts to execute the desired
command

View tutorial video

35. Quick Copy

Step by step
1. Select your desired object
2. Press the CTRL key and drag the copy of your object
from the grip
3. This will create a copy of the initially selected object

View tutorial video

36. Organize Tabs and Panels

Step by step
1. Right click on any of the tabs at the top of your AutoCAD
interface
2. Enter the show tabs option
3. Select which tab you want to activate or disable
4. If already enabled it will be disabled and vice versa
5. You can repeat the same steps to enable or disable a panel
through the show panel option

View tutorial video

37. Print and Publish Multiple Layers

Step by step
1. Select multiple layouts by holding the shift button and left
clicking on the layouts your want published
2. Right click on one of the layouts after selecting all your
layouts
3. Click on publish selected layouts
4. Configure your settings in the dialog box that pops up
5. Publish the layouts by clicking on publish

View tutorial video

38. Bring up Command line, Quick Calculator and
Tool Palette

Step by step
1. Press CTRL-3 to bring up the tool palette
2. Press CTRL-8 to bring up the quick calculator
3. Press CTRL-9 to bring up the command line

View tutorial video

39. Bring up Command line, Quick Calculator and
Tool Palette

Step by step
1. Press CTRL-6 to bring up the DB Connection Manager
2. Press CTRL-7 to bring up the Markup Set Manager
3. Press CTRL-0 to go into full screen mode
4. Use the same commands as above to revert back

View tutorial video

40. The DWGPROPS Command

Step by step
1. Open your drawing
2. In the command line type DWGPROPS
3. Go into the Statistics tab and check editing time

View tutorial video

41. Dimension & Annotation Settings

Step by step
1. Type DIMSTYLE into your command prompt
2. This will open up a dialog box where you can fully customize and
create new dimension styles
3. Under the Home tab, in the annotations ribbon, if you press on
the arrows under each command you can edit your annotation
settings

View tutorial video

42. OSNAP Keyboard Shortcuts

Step by step
1. Start the PLINE command
2. While in the command press Shift + right click
3. Select the type of Snap you want from the menu
4. That snap is now activated for a single click

View tutorial video

43. Exploring Parametric Constraints (part 1)

Step by step
1. Draw your objects (line, circle)
2. Select your constraint (perpendicular)
3. Select your first line
4. Select your second line
5. The lines are now constrained and will maintain perpendicularity

View tutorial video

44. Exploring Parametric Constraints (part 2)

Step by step
1. Draw your objects (Line, Arc, Circle)
2. Select your Constraint (Horizontal, Vertical, Concentric)
3. For horizontal and vertical constraints, select your line to apply
the constraint
4. For concentric, select your circles or arcs to apply the constraint
5. The lines, arcs or circles are no constrained accordingly

View tutorial video

45. Exploring Parametric Constraints (part 3)

Step by step
1. Click the collinear constraint button under the parametric ribbon
2. Select your first line then select your second line, the two lines
should now be collinear
3. For the symmetric constrain, draw your line of symmetry
4. Click the Symmetric constraint button under the parametric
ribbon
5. Select your first object, select your second object and finally
select your symmetry line, your objects are now symmetric about
that line
6. For the equal constraint
7. Click the equal constraint under the parametric ribbon
8. Select your first line, polyline or circle then select your second9
9. The two objects should now be equal in length or radius
depending on the object selected

View tutorial video

46. Helpful Drift Planning Commands

Step by step
1. Run the BREAK command
2. Select the first point of your break for the center line
3. Select the second point, that line will now be broken at those two
points
4. Run the QDIM command
5. Select the objects you want dimensioned
6. Press enter

7. Select the location of your dimensioning annotations

View tutorial video

47. Generate Curves Using Fillet Command

Step by step
1. Generate a drift center line using the Polyline command. Use
straight segments only and make sure theyre long enough to fit the
needed radius.
2. Once the center line is created, run the command Fillet. You will
have five options, select Radius.
3. Type in the radius the equipment requires (e.g. 15 m), and press
enter.
4. You will be asked to select an option again. For this step, select
Polyline, as thats the object to which the radius will be applied to.
5. Select the polyline which represents the center line.
6. Curves with the selected radius will be created between all the
segments of the polyline.

View tutorial video

48. Creating Flat Planes

Step by step
1. Type Planesurf in your AutoCAD command line
2. Select your first corner
3. Select your second corner

View tutorial video

49. Solid History Command

Step by step
1. Type in SOLIDHIST in your command line
2. Enter 1 for the new value, this will activate the solid history
function
3. Type SHOWHIST in your command line

4. Enter 2 for the new value, this will show a visual display of the
history as you change the solid

View tutorial video

50. Hatch Using Tool Palette

Step by step
1. Press CTRL + 3
2. Navigate to the Hatches tab
3. Drag the hatch into the interior of the object to be hatched
4. This will hatch the desired object
5. If you created a custom hatch you can drag and drop it onto the
tool palette for easy access

View tutorial video

51. Use BPOLY to Create Blasting Outlines

Step by step
1. Type BPOLY in your command line
2. Press enter
3. Select the internal point
4. Press enter
5. A boundary polyline should now be created following the
insides of the region you selected

View tutorial video

52. Adjusting Hatch Transparency

Step by step
1. Select your Hatch
2. Open the Properties Menu
3. Click on transparency and type a number between 0-100
4. Your hatch should now be adjusted according to that value

View tutorial video

53. Sort Layers With LAYWALK Command

Step by step
1. Type LAYWALK in the command line
2. Press Enter
3. Select the layer or layers you want to isolate
4. You should now be able to display the layers you selected
while isolating the rest of the unselected layers

View tutorial video

54. Time Saving Keyboard Shortcuts

Step by step
1. Shift + left mouse button
2. Select the object you want to exclude from your selection
3. Shift + right mouse button
4. Select the type of snap you want to use on your next click
5. Shift + Extend/Trim
6. This will carry out the opposite of the initial command, so if youre
trimming it will extend it to the line you selected initially and vice versa

View tutorial video

55. Divide and Measure Polylines

Step by step
1. Create a Polyline
2. Type in MEASURE or DIVIDE
3. Select your polyline
4. Specify length of segment or Block
5. Click on Block in the command line
6. Type in the name of the block you want to use to split your polyline
7. Type in the length of the segment if using MEASURE
8. Type in the number of segments if using DIVIDE

View tutorial video

56. Array Command

Step by step
1. Draw the object you want to create an array of
2. Type in ARRAY
3. Select polar
4. Adjust the settings in the array toolbox
5. If you want all your arrays to be considered 1 block then use
the associative feature
6. Once done editing your array right click and press on Enter
from the menu

View tutorial video

57. Attribute Extraction

Step by step
1. Type in the ATTEXT command in AutoCAD
2. Setup your ATTEXT template or use the attached template file
3. Select your objects
4. Name your output file
5. Press Ok
6. You should now have your txt output file in the location you chose

View tutorial video

58. Revise Work With REVCLOUD

Step by step
1. Type in REVCLOUD in your command line
2. Select the shape of the cloud you want to use (Arc, rectangle, etc)
3. Draw your cloud around the areas that were changed
4. Adjust the colors of the clouds to reflect the types of changes you
made
5. Send the drawing on to the next stage of the engineering process

View tutorial video

59. Manipulate 3D Objects with Gizmo Tool

Step by step
1. Go into your 3D modeling work space
2. Switch into realistic view or any view other than 2D
wireframe
3. Go into the mesh at the top of your AutoCAD interface
4. In the selection ribbon, select face
5. Select the faces you want to manipulate
6. Move them along the axis (they should turn golden to
indicate you will be moving in that axis only)
7. Move them along the planes (the planes will turn gold to
indicate restriction of movement to that plane)

View tutorial video

50. XLINE and RAY Command

Step by step
1. Type XLINE into your AutoCAD command line
2. Select 2 points you want that XLINE to be drawn through
3. Your XLINE is now extended infinitely through those 2 points,
useful for reference lines in construction drawings
4. Type RAY into your AutoCAD command line
5. Specify the first point at which your RAY is starting
6. Specify the direction of your RAY
7. The RAY now extends infinitely in the direction you specified

View tutorial video