Crosby Bolt Type Shackles

Capacities 1/3 thru 150 metric tons, grade 6.

Working Load Limit and grade 6 permanently shown on every shackle.
Forged Quenched and Tempered, with alloy bolts.
Hot Dip galvanized or self colored. (85, 120, and 150 metric ton shackles
are all hot dip galvanized bows and the bolts are Dimetcoted and painted red)
Fatigue rated (1/3t - 55t).
Shackles 25t and larger are RFID EQUIPPED.
G-2130 / S-2130 Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F).
Bolt Type Anchor shackles with
thin head bolt - nut with cotter pin. Meets or exceeds all requirements of ASME B30.26.
Meets the performance requirements
of Federal Specification RR-C- Shackles 85 metric tons and larger are individually proof tested to 2.0 times the
271F Type IVA, Grade A, Class working load limit.
3, except for those provisions
required of the contractor. For Type Approval certification in accordance with ABS 2007 Steel Vessel Rules
additional information, see page 452.
1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available
when requested at time of order and may include additional charges
3.1 Certification as standard available for charpy and statistical proof test from 3.25t
up to 25 tons to DNV2.7-1 and EN13889.
Crosby 3.25t through 25t G2130OC anchor shackles are type approved to DNV Certification
Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact
tested to 42 joules (31 ft-lbs.) min. avg. at -20 degree C (-4 degree F). The tests are
conducted by Crosby and 3.1 test certification is available upon request. Refer to page 88
for Crosby COLD TUFF shackles that meet the additional requirements of DNV rules for
certification of lifting applications - Loose Gear.
All other 2130 shackles can meet charpy requirements of 42 joules (31 ft-lbs) avg at -20
degree C (-4 degree F) when requested at time of order.
Look for the Red Pin . . . the mark of genuine Crosby quality.

SEE APPLICATION INFORMATION
On Page 92 of the General Catalog
Para Espaol: www.thecrosbygroup.com

G-2130 / S-2130 Bolt Type Anchor Shackles

Stock Dimensions Tolerance
Nominal Working No. Weight (in.) +/-
Size Load Limit Each
(in.) (t)* G-2130 S-2130 G-2130OC (lbs.) A B C D E F H L M N C A
3/16 1/3 1019464 .06 .38 .25 .88 .19 .60 .56 1.47 .98 1.29 .19 .06 .06
1/4 1/2 1019466 .11 .47 .31 1.13 .25 .78 .61 1.84 1.28 1.56 .25 .06 .06
5/16 3/4 1019468 .22 .53 .38 1.22 .31 .84 .75 2.09 1.47 1.82 .31 .06 .06
3/8 1 1019470 .33 .66 .44 1.44 .38 1.03 .91 2.49 1.78 2.17 .38 .13 .06
7/16 1-1/2 1019471 .49 .75 .50 1.69 .44 1.16 1.06 2.91 2.03 2.51 .44 .13 .06
1/2 2 1019472 1019481 .79 .81 .64 1.88 .50 1.31 1.19 3.28 2.31 2.80 .50 .13 .06
5/8 3-1/4 1019490 1019506 1262013 1.68 1.06 .77 2.38 .63 1.69 1.50 4.19 2.94 3.56 .69 .13 .06
3/4 4-3/4 1019515 1019524 1262022 2.72 1.25 .89 2.81 .75 2.00 1.81 4.97 3.50 4.15 .81 .25 .06
7/8 6-1/2 1019533 1019542 1262031 3.95 1.44 1.02 3.31 .88 2.28 2.09 5.83 4.03 4.82 .97 .25 .06
1 8-1/2 1019551 1019560 1262040 5.66 1.69 1.15 3.75 1.00 2.69 2.38 6.56 4.69 5.39 1.06 .25 .06
1-1/8 9-1/2 1019579 1019588 1262059 8.27 1.81 1.25 4.25 1.13 2.91 2.69 7.47 5.16 5.90 1.25 .25 .06
1-1/4 12 1019597 1019604 1262068 11.71 2.03 1.40 4.69 1.29 3.25 3.00 8.25 5.75 6.69 1.38 .25 .06
1-3/8 13-1/2 1019613 1019622 1262077 15.83 2.25 1.53 5.25 1.42 3.63 3.31 9.16 6.38 7.21 1.50 .25 .13
1-1/2 17 1019631 1019640 1262086 19.00 2.38 1.66 5.75 1.53 3.88 3.63 10.00 6.88 7.73 1.62 .25 .13
SHACKLES

1-3/4 25 1019659 1019668 1262095 33.91 2.88 2.04 7.00 1.84 5.00 4.19 12.34 8.80 9.68 2.25 .25 .13
2 35 1019677 1019686 52.25 3.25 2.30 7.75 2.08 5.75 4.81 13.68 10.15 10.81 2.40 .25 .13
2-1/2 55 1019695 1019702 98.25 4.13 2.80 10.50 2.71 7.25 5.69 17.90 12.75 13.58 3.13 .25 .25
3 85 1019711 154.00 5.00 3.30 13.00 3.12 7.88 6.50 21.50 14.62 15.13 3.62 .25 .25
3-1/2 120 1019739 265.00 5.25 3.76 14.63 3.62 9.00 8.00 24.88 17.02 17.00 4.38 .25 .25
4 150 1019757 338.00 5.50 4.26 14.50 4.00 10.00 9.00 25.68 18.00 17.75 4.56 .25 .25
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading
applications, see page 94. Individually Proof Tested with certification. Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.

Copyright 2016 The Crosby Group LLC All Rights Reserved 79