VOLVO PENTA GENSET ENGINE

TAD1641GE
484 kW (658 hp) at 1500 rpm, 565 kW (768 hp) at 1800 rpm, acc. to ISO 3046

The TAD1641GE is a powerful, reliable

and economical Generating Set Diesel
Engine built on the dependable in-line six
design.
Durability & low noise
Designed for easiest, fastest and most
economical installation. Well-balanced to
produce smooth and vibration-free opera-
tion with low noise level.
To maintain a controlled working tem-
perature in cylinders and combustion
chambers, the engine is equipped with
piston cooling. The engine is also fitted
with replaceable cylinder liners and valve
seats/guides to ensure maximum durabil-
ity and service life of the engine.
Low exhaust emission
The state of the art, high-tech injection
and charging system with low internal
losses contributes to excellent combus-
tion and low fuel consumption.
The TAD1641GE complies with EU
Stage 2 exhaust emission regulations.
Easy service & maintenance
Easily accessible service and mainte- Features
nance points contribute to the ease of Fully electronic with Volvo Penta EMS 2
service of the engine. Dual frequency switch (between 1500 rpm and 1800 rpm)
High power density
Technical description Emission compliant
Low noise levels
Engine and block
Gen Pac configuration
Optimized cast iron cylinder block with opti-
mum distribution of forces without the block
being unnecessary heavy.
Wet, replaceable cylinder liners
Piston cooling for low thermal load on pis-
tons and reduced ring temperature Fuel system Electrical system
Tapered connecting rods to reduce risk of Self de-aerating system. When replacing Engine Management System 2 (EMS 2), an
piston cracking filters all fuel stays in the engine. electronically controlled processing system
Crankshaft induction hardened bearing Non-return fuel valve which optimizes engine performance. It also
surfaces and fillets with seven main bear- Electronic unit injectors includes advanced facilities for diagnostics
ings for moderate load on main and big-end Fuel prefilter with water separator and water- and fault tracing
bearings in-fuel indicator / alarm The instruments and controls connect to the
Nitrocarburized transmission gears for heavy Gear driven low-pressure fuel pump engine via the CAN SAE J1939 interface,
duty operation Fine fuel filter with manual feed pump and either through the Control Interface Unit
Keystone top compression rings for long fuel pressure switch (CIU) or the Digital Control Unit (DCU). The
service life Fuel shut-off valve, electrically operated CIU converts the digital CAN bus signal to
Viscous type crankshaft vibration damper an anolog signal, making it possible to con-
Replaceable valve guides and valve seats Cooling system nect a variety of instruments. The DCU is a
Over head camshaft and four valves per Efficient cooling with accurate coolant con- control panel with display, engine control,
cylinder equipped with camshaft damper to trol through a water distribution duct in the monitoring, alarm, parameter setting and di-
reduce noise and vibrations. cylinder block. Reliable sleeve thermostat agnostic functions. The DCU also presents
with minimum pressure drop error codes in clear text.
Lubrication system Belt driven, maintenance-free coolant pump
Full flow oil cooler Sensors for oil pressure, oil temp, boost
with high degree of efficiency pressure, boost temp, coolant temp, fuel
Full flow disposable spin-on oil filters, for
extra high filtration Turbo charger temp, water in fuel, fuel pressure and two
The lubricating oil level can be measured Efficient and reliable turbo charger speed sensors. Crank case pressure, piston
during operation (Standard dipstick only) Extra oil filter for the turbo charger cooling pressure, oil level and air filter pres-
Gear type lubricating oil pump, gear driven sure drop sensors.
by the transmission Alternator 24V / 80A
TAD1641GE
Technical Data Standard equipment Engine Gen Pac
General Engine
Engine designation......................................................................... TAD1641GE Automatic belt tensioner
No. of cylinders and configuration.........................................................in-line 6 Lift eyelets
Method of operation.................................................................................4-stroke Flywheel
Bore, mm (in.).......................................................................................144 (5.67)
Stroke, mm (in.)....................................................................................165 (6.50) Flywheel housing with conn. acc. to SAE 1
Displacement, l (in).................................................................... 16.12 (983.7) Flywheel for 14 flex. plate and flexible coupling
Compression ratio....................................................................................... 16.5:1 Vibration dampers
Dry weight, kg (lb).......................................................................... 1480 (3263) Engine suspension
Dry weight with Gen Pac, kg (lb).................................................1910 (4211) Fixed front suspension
Wet weight, kg (lb)..........................................................................1550 (3417) Lubrication system
Wet weight with Gen Pac, kg (lb)............................................... 2020 (4453) Oil dipstick
Full-flow oil filter of spin-on type
Performance 1500 rpm 1800 rpm By-pass oil filter of spin-on type
with fan, kW (hp) at: Oil cooler, side mounted
Prime Power 430 (585) 485 (660) Low noise oil sump
Max Standby Power 473 (643) 546 (743) Fuel system
Fuel filters of disposable type
Lubrication system 1500 rpm 1800 rpm Electronic unit injectors
Oil consumption, liter/h (US gal/h) at: Pre-filter with water separator
Prime Power 0.10 (0.026) 0.11 (0.029) Intake and exhaust system
Max Standby Power 0.10 (0.026) 0.12 (0.032) Air filter with replaceable paper insert
Oil system capacity incl filters, liter................................................................ 42 Air restriction indicator
Air cooled exhaust manifold
Fuel system 1500 rpm 1800 rpm Connecting flange for exhaust pipe
Specific fuel consumption at: Exhaust flange with v-clamp
Prime Power, g/kWh (lb/hph) Turbo charger, low right side
25 % 216 (0.350) 228 (0.369) Cooling system
50 % 199 (0.322) 204 (0.331) Radiator incl intercooler )
75 % 196 (0.318) 202 (0.328) Belt driven coolant pump
100 % 199 (0.322) 206 (0.334) Fan hub
Max Standby Power, g/kWh (lb/hph) Thrust fan )
25 % 217 (0.351) 233 (0.370) Fan guard
50 % 197 (0.320) 205 (0.332) Belt guard
75 % 196 (0.318) 203 (0.330) Control system
100 % 200 (0.324) 210 (0.340) Engine Management System (EMS) with
CAN-bus interface SAE J1939
Intake and exhaust system 1500 rpm 1800 rpm CIU, Control Interface Unit
Air consumption, m/min (cfm) at: Alternator
Prime Power 35.5 (1254) 44.0 (1554) Alternator 80A / 24V
Max Standby Power 38.0 (1342) 45.8 (1617) Starting system
Max allowable air intake restriction, Starter motor, 7.0kW, 24V
kPa (In wc) 5 (20.1) 5 (20.1) Connection facility for extra starter motor
Heat rejection to exhaust, kW (BTU/min) at: Instruments and senders
Prime Power 326 (18539) 373 (21212) Temp.- and oil pressure for automatic
Max Standby Power 356 (20245) 442 (25136) stop/alarm 103C
Exhaust gas temperature after turbine, Other equipment
C (F) at: Expandable base frame
Prime Power 443 (829) 436 (817) Engine Packing
Max Standby Power 455 (851) 479 (893) Plastic wrapping
Max allowable back-pressure in exhaust line,
1)must be ordered, se order specification
kPa (In wc) 10 (40.2) 10 (40.2)
Exhaust gas flow, m/min (cfm) at: optional equipment or not applicable
Prime power 85.0 (3002) 100.6 (3553) included in standard specification
Max Standby Power 92.0 (3249) 110.4 (3899)

Cooling system 1500 rpm 1800 rpm Dimensions TAD1641GE

Heat rejection radiation from engine,
kW (BTU/min) at: Not for installation
Prime Power 18 (1024) 22 (1251)
Max Standby Power 20 (1137) 24 (1365)
Heat rejection to coolant kW (BTU/min) at:
Prime Power 170 (9668) 212 (12056)
Max Standby Power 184 (10464) 231 (13137)
Fan power consumption, kW (hp) 11 (15) 19 (26)
1881

English 06-2014. 2014 AB Volvo Penta

Note! Not all models, standard equipment and accessories are available in all countries.
All specifications are subject to change without notice. 2386 (DURING TRANSPORT) MAX LENGTH 3090}
1160
The engine illustrated may not be entirely identical to production standard engines.

Power Standards Rating Guidelines

The engine performance corresponds to ISO 3046, BS PRIME POWER rating corresponds to ISO Standard Power for
5514 and DIN 6271. The technical data applies to an engine continuous operation. It is applicable for supplying electrical power
without cooling fan and operating on a fuel with calorific value at variable load for an unlimited number of hours instead of com-
of 42.7 MJ /kg (18360 BTU/lb) and a density of 0.84 kg/liter mercially purchased power. A10 % overload capability for govering
(7.01 lb/US gal), also where this involves a deviation from purpose is available for this rating.
the standards. Power output guaranteed within 0 to +2% att MAXIMUM STANDBY POWER rating corresponds to ISO Stan-
rated ambient conditions at delivery. Ratings are based on dard Fuel Stop Power. It is applicable for supplying standby electri-
ISO 8528. Engine speed governing in accordance with ISO cal power at variable load in areas with well established electrical
3046/IV, class A1 and ISO 8528-5 class G3 networks in the event of normal utility power failure. No overload
Exhaust emissions capability is available for this rating.
The engine complies with EU stage 2 emission legislation 1 hp = 1 kW x 1.36
according to the Non Road Directive EU 97/68/EEC. The Information
engine also complies with TA-luft -50% exhaust emission For more technical data and information, please look in the Gener-
AB Volvo Penta
regulations. ating Set Engines Sales Guide. SE-405 08 Gteborg, Sweden
www.volvopenta.com