Pfeiffer

Chemie-Armaturenbau GmbH

High - Performance
Butterfly valve
Series 14b / Series 14c
Application:

Tight-closing, double-eccentric butterfly control valve

especially for the chemical industry where aggressive
medias are used, for example in steam pipelines:

Nominal sizes 3 to 20 as well as DN 80 to DN 500.

Nominal presure ANSI 150 / 300 lbs and PN 10 to 40.
Temperatures -76F to 662F ( -60C to 350C ).

Our newly developed high performance shut-off and control

butterfly valve, which has its own patent and has the following
special features:

Valve body made of

Steel or
Stainless steel

Body style
Wafer-Type or
Lug-Type

Sealing
Type WTD, soft sealing with PTFE V-ring packing,
Fig. 1 - Series 14b Butterfly Valve with Manual Gear Actuator
pre-loaded with belleville washers.
Type MTD, metalic sealing with PTFE V-ring packing,
pre-loaded with belleville washers.
Type WNS, soft sealing with
adjustable stuffing box flange

Further features
Low breakaway torque and low amount of wear due to
the double eccentric bearing design of the shaft.
Long neck versions which allows an easier
installation in pipelines with insulation.
TA-Luft (German clean air act) packing.
A continuous raised face is assured through our
patent protected screwless fastening ring.
Anti blow out valve shaft.
Soft seat rings can be replaced with metal seat rings
on site.
Face-to face acc. to API 609 Class 150.
Face-to face acc. to DIN EN 558-1, series 20, 25, 16.
Face-to face acc. to DIN EN 558-2, series 20 and 16.
Face-to-face dimensions can be changed by using
different fastening rings.
Attachment options acc. to DIN ISO 5211
Fig. 2 - Series 14b Butterfly Valve with Series 31a AT-Actuator

Page 1
 High Performance
Butterfly Valve
Series 14b / 14c

Fig. 3 - Sectional diagram of Series 14 Butterfly Valve

Item Description Item Description Item Description

1 Valve body 11 Bushing 21 Bushing
2 Valve shaft 12 Bushing 22 Spacer bushing
3 Valve disc 13 Body seal 23 Bonnet seal
4 Seat ring 14 Grooved pin 24 O-ring
5 Fastening ring 15 Spacer bushing 25 Intermediate flange
6 Packing box flange 16 Stud bolt 26 Screw
7 Bonnet 17 Nut 27 Primary seal
8 Washer 18 Lower disc 28 Washer
9 V-ring packing 19 Tension spring
10 Belleville spring washer 20 Screw
Table 1 - Parts list

Page 2
 Pfeiffer
Chemie-Armaturenbau GmbH

Versions: The process medium can flow through the valve in both
directions.
Cast valve Series 14b The disc ( 3 ) determines the flow through the free area
Full-mold cast valve Series 14c between disc and seat ( 4 ).
optionally available in the following versions:
Butterfly valve with Hand lever / grid plate. Butterfly valves are sealed between the disc ( 3 ) and the
Butterfly valve with Manual gear actuator. seat ( 4 ).
Butterfly valve with pneumatic rotary actuator.
The shaft ( 2 ) is sealed by a packing ( 9 ).

This is a PTFE-V-ring packing, which by means of the

Special versions: mounted spring washers ( 10 ) located in the top part of the
packing chamber, are maintenance free and under tension.
Nominal size > DN 500 Optionally, the packing can also consist of a PTFE-
Double stuffing box meshwork packing, which is pre-loaded over an adjustable
Primary seal with O-ring stuffing box.
Facing with groove, only series 16 and 25 of DIN EN 1092
Special materials The direction of flow and the pressure difference determine
Low temperature version (> 350C) the breakaway torque to open the butterfly valve.
High temperature version (-196C) The double eccentric bearing design of the shaft causes the
disc on opening and closing to remain in contact with the
seat only over a very small angle of rotation ( Fig. 4 ).

Additional accessories: This reduces wear and increases the service life of the
valve.
The control valves are also available without accessories or in In addition, it reduces the breakaway torque.
combination with the following parts:

Positioner When the process medium flows through the valve in

Limit switch direction A ( Fig. 4 ), the butterfly disc is slightly pressed out
Solenoid valve of the seat. This reduces the pre-loaded pressure and the
Air sets breakaway torque.
Gauge block
When the process medium flows through the valve in
Other special accessories are available on request. direction B, the pre-loaded pressure increasures, with a rise
in the breakaway torque.
This results in a better tightness being achieved.

Principle of operation:
Failure position: depending on the mounting
position of the actuator, there are two failure
positions, which become active, either by
pressure relieving or, failure of air supply:

Butterfly valve with actuator on failure closing

on failure of air supply the butterfly valve closes.
The opening of the valve accures by increasing
air supply against the force of the springs.

Butterfly valve with actuator on failure opening

on failure of air supply, the butterfly valve opens.
The closing of the valve accures by increasing air
supply against the force of the springs.

Note: Before using the butterfly valve in hazard-

ous areas, check whether this is possible ac-
cording to ATEX 94/9/EC.
See operating instructions <BA 14b>.

Page 3
 High Performance
Butterfly Valve
Series 14b / 14c

Dimensions and weights:

Fig. 5 - Butterfly Valve in Lug-Type version

Fig. 6 - Butterfly Valve in Wafer-Type version

Page 4
 Pfeiffer
Chemie-Armaturenbau GmbH

80 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 500 /

DN
3" 4" 6" 8" 10" 12" 14" 16" 20"

API 609*), Class 150

46 52 56 60 68 78 78 102 127
+ PN 10 / 40

Series 25, PN10 / 40

L 49 56 70 71 76 83 102 102 127
+ (Class 150)

Series 16, Class 150/300

64 64 76 89 114 114 127 140 152
+ PN 10 / 40

A 255 278 366 441 468 544 668 676 845,5

B 160 170 225 277 262 300 360 376 465

C 95 108 141 164 206 244 308 300 380,5

a 1,6 2 3 4 5 6 7 8 10

D ( only Wafer-Type ) 142 160 217 272 326 378 438 485 594

Class 150 152,4 190,5 241,3 298,5 362 431,8 476.3 539,8 635

Class 300 168,1 200,2 269,7 330,2 387,4 450,9 514.4 571,5 685,8

PN 10 160 180 240 295 350 400 460 515 620

K
PN 16 160 180 240 295 355 410 470 525 650

PN 25 160 190 250 310 370 430 490 550 660

PN 40 160 190 250 320 385 450 510 585 670

Class 150 4 x 19,1 8 x 19,1 8 x 22,4 8 x 22,4 12 x 25,4 12 x 25,4 12x28.4 16 x 28,4 20 x 31,8

Class 300 8 x 22,4 8 x 22,4 12 x 22,4 12 x 25,4 16 x 28,4 16 x 31,8 20x31.8 16 x 35,1 24 x 35,1
nxP PN 10 8 x 18 8 x 18 8 x 22 8 x 22 12 x 22 12 x 22 16x22 16 x 26 20 x 26
Wafer-
Type PN 16 8 x 18 8 x 18 8 x 22 12 x 22 12 x 26 12 x 26 16x26 16 x 30 20 x 33

PN 25 8 x 18 8 x 22 8 x 26 12 x 26 12 x 30 16 x 30 16x33 16 x 36 20 x 36

PN 40 8 x 18 8 x 22 8 x 26 12 x 30 12 x 33 16 x 33 16x36 16 x 39 20 x 42

Class 150 4 x 5/8" 8 x 5/8" 8 x 3/4" 8 x 3/4" 12 x 7/8" 12 x 1" 12x1" 16 x 11/8" 20 x 11/8"

Class 300 8 x 3/4" 8 x 3/4" 12 x 3/4" 12 x 7/8" 16 x 1" 16 x 11/4" 20x13/16" 20 x 13/8" 24 x 11/4"
nxP PN 10 8 x M16 8 x M16 8 x M20 8 x M20 12 x M20 12 x M20 16x2M0 16 x M24 20 x M24
Lug-
Type PN 16 8 x M16 8 x M16 8 x M20 12 x M20 12 x M24 12 x M24 16xM24 16 x M27 20 x M30

PN 25 8 x M16 8 x M20 8 x M24 12 x M24 12 x M27 16 x M27 16xM30 16 x M33 20 x M33

PN 40 8 x M16 8 x M20 8 x M24 12 x M27 12 x M27 16 x M30 16xM33 16 x M36 20 x M39

E 19 19 22 26 26 31 31 37 43

F 14 14 17 19 19 24 24 30 34

d 18 18 22 26 26 33 39 42 54

SW 14 14 17 19 19 24 24 30 34

DIN ISO Connection F05 F05 F07 F10 F10 F12 F12 F14 F16

Weight ca. kg 7 10 18 28 42 66 100 120 220

Table 2 - Dimensions in mm and weights in kg

*) API 609 corresponds to line 20

Page 5
 High Performance
Butterfly Valve
Series 14b / 14c

Technical Data: Functional diagram with opening angles:

Nominal size 3" to 20" as well as DN 80 to 500
Nominal pressure ANSI Class 150 and 300 as well as PN 10 to 40
Body style Lug-Type or Wafer-Type
soft sealing
Seat ring PTFE - live metal sealing
R-PTFE
loaded
-76F - 410F -76F - 446F -76F - 662F
Temperature range
(-60C - 210C) (-60C - 230C) (-60C - 350C)
direction of
On request as it depends on pressure and temperature
Leakage flow A
for direction of Leakage rate A acc. to Leakage rate VI
flow B DIN EN 12266-1, P12 acc. to DIN EN 1349
Rangeability 50 : 1
Class 150: acc. to API 609 (DIN EN 558-2, Series 20)
ANSI
Face Class 300: acc. to EN 558-2, Series 16
to face acc. to DIN EN 558-1, Series 20
DIN
Special version: acc. to DIN EN 558-1, Series 25, 16
Perm. operating
See pressure-temperature diagram
pressures
Table 3 - technical data

Materials:
Fig. 7 Functional diagram with opening angles
Version ANSI DIN
Cast iron A 351 CF8M / A 216 WCB 1.4408/ 1.0619
Valve
body Full-mold cast
A 240 Gr. 316L / A 516 Gr.70 1.4571/ 1.0570 Characteristic curve:
etc. etc.
Butterfly disc A 351 CF8M 1.4408
A 182 F51 1.4462 /
Shaft
AISI 630 / H1150D 1.4542 / H1150
Fastening ring A479 F316Ti 1.4571
Stuffing box flange A479 F316Ti 1.4571
soft PTFE-live loaded / R-PTFE
Seat ring
metal Nickel
PTFE - V-ring-packing with
Packing
cup springs of 1.8159, Delta Tone coated
Table 4 - Materials

Body version, materials and related

temperature ranges:
Shaft material and seat sealing
AISI 630 / H1150D Fig. 8 - Characteristic curve
Butterfly valve version and
PTFE - soft sealing
body material HT-metal
PTFE - live sealing
R - PTFE
loaded Terms for noise level calculation
-76 bis 410F -76 bis 446F -76 bis 572F
A 351 CF8M
(-60 bis 210C) (-60 bis 230C) (-60 bis 300C)
10 20 30 40 50 60 70 80 90
14 bis 410F 14 bis 446F 14 bis 572F
A 216 WCB
Series 14b (-10 bis 210C) (-10 bis 230C) (-10 bis 300C) FL 0.95 0.95 0.92 0.82 0.74 0.67 0.61 0.57 0.54
Cast iron -76 to 410F -76 bis 446F -76 bis 572F
1.4408 xT 0.75 0.75 0.73 0.57 0.47 0.38 0.31 0.28 0.25
(-60 bis 210C) (-60 bis 230C) (-60 bis 300C)
14 bis 410F 14 bis 446F 14 bis 662F z 0.35 0.30 0.25 0.20 0,17 0.14 0.12 0.11 0.10
1.0619
(-10 bis 210C) (-10 bis 230C) (-10 bis 350C) Table 6 - noise level calculation and terms for control valve sizing
-76 bis 410F -76 bis 446F -76 bis 662F
A 240 Gr.316L z-values for noise level calculation acc. to VDMA 24422 and
(-60 bis 210C) (-60 bis 230C) (-60 bis 350C)
A 516 Gr.70
14 bis 410F 14 bis 446F 14 bis 662F Terms for control valve sizing acc. to DIN EN 60534.
Series 14c (-10 bis 210C) (-10 bis 230C) (-10 bis 350C)
Full-mold cast 14 bis 410F 14 bis 446F 14 bis 662F
S355J2G3
(-10 bis 210C) (-10 bis 230C) (-10 bis 350C)
-76 bis 410F -76 bis 446F -76 bis 662F Correction terms:
1.4571
(-60 bis 210C) (-60 bis 230C) (-60 bis 350C) with gases and vapors LG = 0,
Table 5 - Body version, materials and accociated temperature ranges with liquids LF = 0
( HT - High-temperature version)

Page 6
 Pfeiffer
Chemie-Armaturenbau GmbH

Cv values and related opening angles: kv values and related opening angles:

Opening angle Opening angle

DN DN
10 20 30 40 50 60 70 80 90 10 20 30 40 50 60 70 80 90
3" / 80 5.3 27 53 80 109 138 156 172 176 3" / 80 4.5 23 45 68 93 118 133 147 150
4" / 100 8 42 84 126 174 222 250 275 281 4" / 100 7 36 72 108 149 190 214 235 240
6" / 150 25 123 246 369 508 647 729 803 819 6" / 150 21 105 210 315 434 553 623 686 700
8" / 200 49 243 488 731 1009 1285 1447 1594 1626 8" / 200 42 208 417 625 862 1098 1237 1362 1390
10" / 250 80 399 797 1196 1646 2098 2363 2602 2656 10" / 250 68 341 681 1022 1407 1793 2020 2224 2270
12" / 300 117 586 1172 1759 2423 3088 3478 3829 3908 12" / 300 100 501 1002 1503 2071 2639 2973 3273 3340
16" / 400 214 1071 2141 3212 4425 5638 6352 6994 7137 16" / 400 183 915 1830 2745 3782 4819 5429 5978 6100
20" / 500 338 1688 3377 5065 6978 8892 10018 11030 11255 20" / 500 289 1443 2886 4329 5964 7600 8562 9427 9620
Table 7 - Cv values Table 8 - kv values

Pressure-Temperature diagram:
The area of application is determined by the pressure-temperature diagram. Process data and the process medium can affect the values in
the diagram.

Fig. 9 - Pressure-temperature diagram ( soft sealed ) Fig. 10 - Pressure-temperature diagram ( metal sealed )

Torque and breakaway torques:

soft- Perm. Breakaway torque Mdl metal- Perm. torques Losbrechmoment Mdl in Nm bei
sealed torques in Nm with differential sealed Mdmax. in Nm Differenzdruck p in bar
Butterfly Mdmax. in Nm pressure p in bar Butterfly with shaft in ( Anstrmrichtung A )
Valve with shaft in ( direction of flow B ) Valve AISI 630 /
NS A182 F51 NS A182 F51 AISI 630 0 5 10 15 20 25 30 40
0 5 10 16 H1150D
3" / 80 424 40 43 45 51 3" / 80 424 943 679 32 32 46 56 73 79 103 125
4" / 100 424 48 54 59 67 4" / 100 424 943 679 43 51 73 89 116 126 164 199
6" / 150 770 91 106 114 157 6" / 150 770 1710 1231 60 127 183 222 290 316 410 500
8" / 200 1194 190 219 269 288 8" / 200 1194 2654 1911 82 241 348 422 551 600 779 950
10" / 250 1194 320 364 433 480 10" / 250 1194 2654 1911 189 473 683 857 1224 -
12" / 300 2429 370 467 578 654 12" / 300 2429 5398 3886 357 609 893 1301 -
16" / 400 4905 690 903 1089 1239 16" / 400 4905 10900 7848 523 1024 1638 -
20" / 500 8953 885 1180 1450 1723 20" / 500 8953 19895 14325 2616 3280 3700 -
Table 9 - max. permissible torque and breakaway torque Table 10- max. permissible torque and breakaway torque
( soft sealed ,direction of flow B ) ( metal sealed ,direction of flow A )

The breakaway torques specified are average values which were measured with air at 20C with the corresponding pressure differences.
Operating temperature, process medium and long operating times may affect the permissible torques and breakaway torques considerably.

Page 7
 Pfeiffer
Chemie-Armaturenbau GmbH

Selecting and sizing the butterfly valve: Note: All relevant details regarding the version
ordered, which deviate from the specified
1. Calculate the appropriate kv value. version in this technical description data, can be
taken if required, from the corresponding order
2. Select the nominal size and the kvs value from confirm.
Table 5 resp. 6.

3. Comparing the operation conditions in acc. to the

pressure-temperature diagram.

4. Select a suitable actuator.

Ordering text:

High-Performance butterfly valve Series 14b

Nominal size DN . . . .
Nominal pressure PN . . . .

Valve body material acc. to table 2

Seat seal Metal sealing or soft sealing

Direction of flow A standard direction of flow for

throttling service
B reversed direction of flow for
shut.off service

Manual gear or
Actuator brand name: . . . .
Fail-safe position Valve OPEN or valve CLOSED
Supply air . . . . bar
Operating range Number of springs

Operating pressure . . . . bar

Medium temperature . . . . C or . . . .F
Medium Dry or lubricating

Limit switch brand name: . . . .

Solenoid valve brand name: . . . .
Positioner brand name: . . . .

Others ....

For your special requirements, please contact our technical sales department.

Pfeiffer Chemie-Armaturenbau GmbH

Hooghe Weg 41 47906 Kempen Germany
600414 / PDF= 033

Phone: +49 2152 2005 - 0 Fax: +49 2152 1580

E-Mail: vertrieb@pfeiffer-armaturen.com Internet: www.pfeiffer-armaturen.com

Values subject to change

Issue July 2007 Page 8 Data Sheet TB 14b_EN