Master Key System

Design Guide
Guidance and worksheets for use with ASSA ABLOY Group brands:
ABLOY | LOCKWOOD | MEDECO
 Introduction Table of Contents
To ensure a facility or building has the desired Planning
level of security, it is necessary to have a properly
designed and maintained master key system. ASSA Convenience vs. Security,
ABLOY Australia offers all of the products and Achieving Proper Balance . . . . . . . . . 3
services to help you implement a new master key System Structure . . . . . . . . . . . . 4
system, or expand an existing one.
Levels of Keying . . . . . . . . . . . . . 4
2-Level System . . . . . . . . . . . . . 5
Key System Products 3-Level System . . . . . . . . . . . . . 5
Product solutions include: 4-Level System . . . . . . . . . . . . . 5
Cylinders for various security requirements levels
Cylinders that meet or exceed the Australian Key Symbols
Standard AS 4145.2 2008
Standard Key Symbols . . . . . . . . . . 6
Cylinders that work with electrified stand-alone
2-Level System . . . . . . . . . . . . . 6
and networked access control systems
3-Level System . . . . . . . . . . . . . 6
Grand Master Pie A . . . . . . . . . . . 7
Professional Support
4-Level System . . . . . . . . . . . . . 8
Our team of trained Key and Door Specification
Special Keying Requirements, Larger Systems . . 8
System Specialists will help you design a secure
master key system, develop and implement key
control policies, select the right cylinder for
each doorway, and understand the latest trends
System Expansion
in physical security. As the leader in security Define Expansion Parameters. . . . . . . . 9
and safety solutions, ASSA ABLOY has the know Sample Expansion Specification. . . . . . . 9
how and expertise to assist with any security
requirement for your premises. What You Must Know . . . . . . . . . . . 9
Theoretical Numbers Reduced . . . . . . . 9
Cross Keying . . . . . . . . . . . . . . 10
Design Guides
Master Key System Design Guide: In addition
to the support provided by our team, this design
Step by Step
guide can help you plan and apply a master key Designing Master Key Systems . . . . . 11-12
system. It takes you through the entire process
and includes a glossary of master key system
terms and worksheets to assist in the layout phase. Glossary and Keying Levels
Key Control Guide: To extend the life and value Terms & Definitions . . . . . . . . . 13-16
of a key system, correct key control policies must Levels of Keying . . . . . . . . . . . . . 17
be in place. ASSA ABLOY offers a comprehensive
key control guide that will help you design policies
and procedures for your facility. System Design Worksheet
System Design Worksheet (Level 3) . . . . . 18
Learn More Sample System Design Worksheet (Level 3) . . 19
Contact the Key System Specialist of your local
ASSA ABLOY Australia team to learn more about
our products, services and training programs, and
to get a copy of the Key Control Guide.

For assistance, contact your local ASSA ABLOY Australia team.

2
 Planning

Planning
Careful planning is key to the long-term success and life of a
master key system. Planning starts with understanding the
opposing forces of security and convenience, and creating the
proper balance. From there, its easy to move onto developing
the key system structure.

Maximum Security Maximum Convenience

Maximum Security Maximum Convenience

Minimal
Building
Maximum Security Maximum
Building Personal
Security Convenience
Minimum
Personal
Convenience

Some buildings will be heavily security oriented. Lack of Some buildings will require great personal convenience.
convenience may make it hard to operate the building on This takes away from building security.
a day to day basis

Opposing Forces
The cylinder mechanism and the keying system must Security Convenience
strike the right balance between two archrivalssecurity Keyed to Differ sets Extensive cross keying
and convenience.
Small, unrelated systems One huge,
The type and amount of cross key, the use of keyed alike complicated system
groups and the number of levels of keying all play critical Patented keyways
roles in this delicate balance. They also directly affect the Security cylinders Standard or non-protected keyway
amount of expansion available in the system. Many selective master keys
High security cylinders
Key control No key control

Proper Balance
Balanced Balanced
The simplest keying systems are often the most secure Building Personal
and will last longer than complicated ones. Cross keying Security Convenience
and complicated systems reduce security and expansion
potential. A system designed around personnel will inevitably
have a shorter life than that of a system designed around a
building or structure.

For assistance, contact your local ASSA ABLOY Australia team.

3
 Planning
Planning

System Structure
Begin sketching out a key system schematic using descriptive floor or department masters DO NOT operate these areas.
terms appropriate for the job at hand. Typically these would Group them all under their own MK (or use changes under
be departments, buildings or geographic areas. It is not the grand, etc.).
necessary to account for every change key at this early stage.
The schematic often looks like an organizational chart. Key all similar core areas alike: one key symbol for all electrical
areas; a second one for all pipe chases; a third for all
When planning the system, dont forget the building core. mechanical rooms, etc. This reduces the need to issue
Core areas are generally maintenance areas: stairwells, master keys to maintenance personnel. Once the structure is
mechanical rooms, electrical, phone and HVAC (Heating, determined, the next step is to determine the level of keying.
Ventilation and Air Conditioning) areas. Normally, individual

SYSTEM WIDE

ADMINISTRATION PRODUCTION CORE AREAS

AREAS AREAS AREAS

Levels of Keying EXECUTIVE

First, we must understand the
concept of levels of keying. Think
of it as levels of authority in an
organization. All systems should
have a structure like that of a
corporate organizational chart. SUPERVISORY SUPERVISORY SUPERVISORY

EMPLOYEE EMPLOYEE EMPLOYEE

For assistance, contact your local ASSA ABLOY Australia team.

4
 Planning

Planning
2-Level System
MK
The simplest master key system has two levels of keying
and is considered the lowest level of master keying. The less
powerful keys at the bottom are called change keys. Each one CK
operates only one lock, or one group of keyed alike locks. The
more powerful key at the top is called the master key.
CK
Even the largest, most complicated keying systems for
hospitals and universities can be broken down into pieces
that fit this simple model. CK

3-Level System
GMK
A 3-level system is nothing more
than two or more 2-level systems
tied together under a higher level
key called a grand master key.
MK MK MK

CK CK CK

CK CK CK

CK CK CK

4-Level System GGMK

A 4-level system ties two or more
3-level systems together under a
higher level key called a great grand
master key. GMK GMK
Even though large jobs tend to
require more levels of keying than
small jobs, most systems do not MK MK MK MK
need more than 4 levels of keying.
In a 4-level master key system, it is
especially important to consider the CK CK CK CK
traffic flow throughout the building.
CK CK CK CK

CK CK CK CK

For assistance, contact your local ASSA ABLOY Australia team.

5
 Key Symbols
Standard Key Symbols
A key symbol is an alpha and/or numeric (MK2, CK1, 1-1)
designation that is used to properly identify the correct
key combination for a door or group of doors.
Key Symbols

2-Level System MK
Here are a few rules to consider when designing
a 2-level system:
CK1

Rule #1: Change keys have numbers added to

the letters or numbers of the master key theyre CK2
under. In 2-level systems, it is these numbers
that come last.
CK3

3-Level System GMK

In systems with more than 2 levels, the change
key numbers come last. Here we have a 3-level
system, a grand master key system.
The change key numbers come last and the MK1 MK2 MK3
master keys have 2 letters. The new item here is
the grand master key.
Rule #2: GMKs have only one letter or number. 1-1 2-1 3-1

Rule #3: Masters under the grand must start

with the letters MK. 1-2 2-2 3-2

1-3 2-3 3-3

For assistance, contact your local ASSA ABLOY Australia team.

6
 Key Symbols
Grand Master Pie A
A keying system is like a pie. You can cut it into many pieces,
but the more pieces, the smaller each piece and the more
there is to manage.
The larger you make one piece, the less remaining pie available.

Keep It Simple

Key Symbols
MK15 MK16
MK14 MK1
MK13 MK2
MK1 MK2
MK12 MK3

MK11 MK4

MK10 MK5 MK3 MK4

MK9 MK6
MK8 MK7

Many masters: Top heavy Fewer masters: preferable

system with limited room due to more expansion
for expansion opportunities

The following represents a schematic of a level three (GMK) system.

Your system may vary somewhat from this.

GMK
Grand Master Key

(MKGM) Housekeeping Key

Perimeter Operations Management Service Future Future

MK1 MK2 MK3 MK4 MK5 MK6
Future Future
Entrances Security HR W-Toilets Future GM-(NUMBER)
Plan for 30 CK Plan for 30 CK
1-1 2-1 3-1 to 3-5 4-1 President s
(5-1 TO 5-30) (6-1 TO 6-30)
Office
Storage Lock Shop IT (Change under
M-Toilets the Grand)
1-2 2-2 3-6 to 3-10
4-2

Roof Access Electric Closet Finance

1-3 2-3 3-11to 3-15 Cafeteria
4-3 to 4-6
Offices
Phone Closet
3-14 to 3-30 Cleaner
2-4
4-7 to 4-10

Pipe Chases
2-5
Access Control Override
KD1

For assistance, contact your local ASSA ABLOY Australia team.

7
 Key Symbols
4-Level System GGMK
In a 4-level system (great grand master key
system) the first 4 rules still apply:
I ts a system of more than 2 levels,
so the change key numbers come last GMK1 GMK2
Masters have 2 numbers or letters
Key Symbols

The first number matches the grand

MK1-1 MK1-2 MK2-1 MK2-2
Grands have a single number
The new information here is the great grand.
1-1-01 1-2-01 2-1-01 2-2-01
Rule #5: The symbol for a great grand master
key is GGMK.
1-1-02 1-2-02 2-1-02 2-2-02

1-1-03 1-2-03 2-1-03 2-2-03

Special Keying Requirements Larger Systems

There are many other symbols for special keying requirements. Multi Profile keyways may be used to accommodate larger
Selective Master Keys systems and expansion requirements necessary for future
development. Plan your largest systems wisely from the start;
(ENG) Engineering key with the use of multi profile keyways the bittings are repeated
(CLR) Cleaners on other key sections. Let the manufacturer decide how
to apply keyways to best suit the job at hand based on the
(SEC) Security key
numerical expansion parameters.
Change Keys Under the Great Grand Master Key (GGMK)
GGM1 - The first change key directly under the GGMK
GGM2 - The second change key directly under the GGMK
and so on
Change Keys Under the Grand Master Key (GMK)
GM-1 - The first change key directly under the GMK
GM-2 - The second change key directly under the GMK
and so on

For assistance, contact your local ASSA ABLOY Australia team.

8
 System Expansion
Always consider the expansion when designing master key
systems. A master key system is like a rubber band. When
stretched vertically (more levels of keying) it contracts
horizontally (fewer combinations at each level). When
stretched horizontally (more combinations at each level)
it contracts vertically (fewer levels of keying are available).
Keep this in mind when designing keying systems and
submitting expansion parameters to the manufacturer.
Supply actual numbers for expansion under every master
level key, avoid using percentages.

Define Expansion Parameters What You Must Know

Levels of keying In many cases, expansion is a guess, but it must be the best

System Expansion
Realistic numbers at each level possible guess. Ask questions like these:

All branches of system How many more buildings in this system?

Mixtures of cylinder mechanisms How do future buildings fit into the structure?

Its absolutely critical for the health and longevity of the system What is the maximum number of keyed openings per
to establish realistic expansion parameters. See sample floor/department/areas that are keyed differently?
expansion specification section below and note that actual Where does this job fit into the total final system?
numbers are shown for each level. Are future buildings planned?
Define realistic expansion for the number of masters under How do they fit into the overall system?
each grand, and changes under each master for all parts of
the system. If different cylinder mechanisms will be mixed What is the maximum conceivable number of keyed
on the project, define where each will be used. openings on a floor after maximum partitioning?
Will all cylinder mechanisms be under the same system?

Sample Expansion Specification

Planning should include future building additions or Theoretical Numbers Reduced
partitions, and rekeying individual door or groups of doors The master key systems overall capacity is affected by the
if change keys or master keys are lost or stolen. following factors:
Look as far into the future as possible, but dont go wild. Mechanical factors of cutting the key
Stay realistic, and stay away from percentages.
T
heoretical numbers are first reduced by a
Here is an example of clear expansion parameters. mechanical factor, called the MACS (Maximum
Establish a new grand master key system Adjacent Cut Specification)

Plan 20 changes directly under the grand Use of multiple selective keys

Plan 10 master keys Cross keying

Plan 50 changes each for each master

For assistance, contact your local ASSA ABLOY Australia team.

9
 System Expansion
Cross Keying
Cross keying a cylinder allows additional keys other than its
own key set to operate it. There are two types of cross keying:
X1-1-03
controlled and uncontrolled. See the glossary beginning on Receptionist
page 13 for additional information.
Cross keying is always designated by the letter X: prefix X to 1-1-2 1-1-1
the key symbol, then list each key symbol that is required to
also operate the cylinder. Example: X1-1-01, OB (operated by) Office 1 Office 2
1-1-02,1-1-03,MK1,GMK.
X1-1-03 operated by 1-1-2, 1-1-1, MK1 AND GMK.
Cross keying:
Should be avoided Case #1: Cylinder requires its own change key. The illustration
X1-1-03
Receptionist
depicts part of a small medical building where two doctors
D
oes not fit in a system that has been designed
share a common receptionist. The receptionist gets the
for security
1-1-03 key. Each doctor carries a key that operates only
1-1-2 1-1-1
Normally results in unplanned key interchange one office, but is also cross keyed into the entrance from
the corridor.
System Expansion

Reduces the overall system capabilities Office 1 Office 2

Increases the risk of unauthorized key interchange Determine the X1-1-03

symboloperated
of the change
by 1-1-2,key. Then
1-1-1, MK1prefix the letter
AND GMK.
X (example: X1-1-03). Then list all keys that are to operate in an
Convenience May Reduce Cylinder Security and Hinder operated by phrase. Example: X1-1-03 operated by
System Expansion 1-1-2,1-1-1,MK1 AND GMK. Note that X is a cylinder
1-1-01 1-1-02 1-1-03
Cross keying not only reduces security, it reduces expansion specification only. The keys for cylinder X1-1-03 are
possibilities. Uncontrolled cross keying (between different designated 1-1-03.
1-1
masters or grands) reduces it even more. If one master is lost,
so are all of its changes. If one grand is lost, so are all of its
1-1-04 1-1-05 1-1-06
masters and all of their changes. This can add up to thousands
of combinations lost. Therefore, supplying extra keys is
recommended rather than jeopardizing the integrity of the
master key system by allowing this convenience. 1-1 operated by 1-1-01
1-1-01through 1-1-06, MK1 AND
1-1-02 GMK.
1-1-03
An example of cross keying is when two or more different keys
such as 1-1-01 and 1-1-02 are both required to operate the 1-1
same cylinder. This reduces the cylinders security. When the
cross keying occurs under all the same higher level keys, such
1-1-04 1-1-05 1-1-06
as 1-1-01 and 1-1-02, it is known as controlled cross keying.
When it combines keys under different higher level keys, such
as 1-1-01 and 1-2-01, it is known as uncontrolled cross keying.
In addition to reducing the security of the cylinder, cross keying 1-1 operated by 1-1-01 through 1-1-06, MK1 AND GMK.
usually imposes limits on the flexibility and expansion of the
overall keying system. This is especially true of uncontrolled Case #2: Cylinder does NOT require its own change key. This
cross keying. For these reasons, it is strongly recommended illustration depicts a section of a floor in a dormitory. Each
to allow personnel to carry more than one key. Cross keying students bedroom key operates the hall door lock. There is no
should be discouraged whenever possible. However, when need to construct a key that operates only the hall door.
cross keying is required, it is specified below, and should be
In this case, place an X at both the beginning and end of the
summarized at the beginning of each order.
symbol and a number between them. Example: X1X, X2X,
etc. Again, always include the operated by phrase with a
complete listing of key symbols to operate.

For assistance, contact your local ASSA ABLOY Australia team.

10
 Step by Step
Designing Master Key Systems

Step 1: Meeting Security Objectives - Change key, master key, and grand master key
Level four Great Grand Master Key System
Determine the level of access for each opening requiring
a cylinder. - C
hange key, master key, grand master key, and great
grand master key
Here are the different types of cylinder mechanisms.
With more levels, additional internal components are
Conventional open & restricted keyways
required in the cylinder. This increases the possibility of
- Not contract controlled unauthorized key interchanges
- Key blanks are readily available Separate internal departments in the building(s) into
Patented locking system departments, buildings or geographic areas.
- A
dministrative documents will be required between Perimeter
the lock manufacturer and owner - I ncluding all exterior doors, roof surfaces, gates and
- Key blank distribution restrictions are in place fences, and adjacent buildings
Security (secondary locking mechanisms) Core Areas (Operations)
- Provides resistance against picking and manipulation - S ensitive areas crucial to daily operations, such as plant
engineering, security and mechanical operations
High security (Aust. Standard AS4145.2 2008 SC7 or
greater) Management
- Provides resistance against picking / manipulation - A
reas that are vital for daily business activities,
and drilling including human resources, administration, executive
offices, IT, and accounting
When access control devices are furnished with a key
override feature special consideration should be given Services
regarding its keying. - A
reas that provide employees and visitors with

Step by Step
Stand-alone access control locking devices (at door wiring) services, such as restrooms, medical treatment areas,
housekeeping, food service, retail (unless its a leased
- T
o facilitate multiple users through common doors
outside source)
Integrated locking systems (hardwired into access
Unique Applications
control systems)
- D
oor openings requiring access control hardware
where key override is required, or any other special
Step 2: Planning application
Establish the level of the master key system. The higher the Tenants
level, the less secure.
- Any tenants that are not part of the building
Before determining the level ask these very important
questions: It is recommended to establish a separate system for
those areas requiring security type cylinder mechanisms
Who, if anyone, is authorized to carry the top master key?
Who carries master keys and change keys? Continued on next page
Does every employee receive a key / do they need a
key?
Select the level:
Level two Simple Master Key System
- Change key and master key only
Level three Grand Master Key System

For assistance, contact your local ASSA ABLOY Australia team.

11
 Step by Step
Step 3: Assigning Key Symbols
Who is authorized to cut keys?
Use an alpha and/or numeric designation to properly identify
the correct key combination for a door or group of doors. Here - W
hat form of work order will be used to authorize
are some helpful hints: cutting of keys?
KISS Keep It Simple System - Who will sign the work order?
Lowest level possible - What records will be kept, and where?
Key to the building security objectives NOT to the What type of reports will be required?
convenience of the keyholders - Overdue keys
- D
etermine if the system is to be designed for security - Mis-cut keys
or convenience (see page 1)
- Who receives the reports?
Key alike within master key groups as much as possible
O
nce a key has been cut, what instructions are given
- A
void top heavy systems (example: few change keys to the recipient?
used under numerous masters)
- Key receipt recommended
Avoid cross keying, especially with patented locking
systems and higher Ensure that all transactions are recorded by the key
control authority
ENFORCEMENT FROM THE START!
Step 4: Key Control and Support and back those who are responsible
Key Management for maintaining and servicing the system

Establish key hierarchy, key issuing policies and procedures,

and administrative disciplines. Step 5: Service and Maintenance
What disciplinary action(s) will be put into place Follow proper service schedules and procedures.
for violations? Recommendations include the following:
- Fines or deposits Utilize an in-house or outside locksmith
Step by Step

- Lost keys - Ensure proper training

- Keys not returned - Establish key cutting log
- W
ill there be a key receipt required? Where will that - Establish service request procedures
be kept?
Have service equipment available
What is the role of the key control authority?
- Key kit
- Authorized to purchase
- C
ode cutter that complies with systems depths and
- Responsible for key control administration spacing specifications
- Maintains key control software and all transactions - Locksmithing tools, fixtures and accessories
Provide adequate quantity of keys Establish stock levels and requirements to avoid misuse
- Top master keys - limit the number of these to only a few of multi-section key blanks
- Master keys - also limit the number of these - Additional cylinders ready for emergencies
- Change keys per key set and/or per keyed alike sets - Additional key blanks (of all keyways)
- S pecial purpose keys; Control keys - limit the number
of these
Step 6: Intellectual Property
With whom or where will the key blanks be kept?
Determine who will own the intellectual property or
copyright of the system design & code permutations.

NOTE: See glossary on pages 13-16 for terms and definitions.

12 For assistance, contact your local ASSA ABLOY Australia team.
 Glossary
This glossary relates to ASSA ABLOY Australia key systems CAM
education and should not be considered universal. Cylinder A rotating lever attached to the end of the cylinder plug to activate the
and Keying terminology has evolved over many years and lock mechanism.
while it is generally understood by those conversant with lock
and key hardware, the accompanying glossary may assist to CHANGE KEY
clarify any areas of doubt. See servant key

1. Terms and definitions are to be reprinted in their entirety.

COMBINATE
2. Credit is to be given to Australian Standard AS 4145.1- To set a combination in a lock, cylinder, or key.
2008, (Locksets and hardware for doors and windows.
CONSTRUCTION CYLINDER
Temporary keyed cylinders installed during construction, removed and
ACCESS CONTROL replaced with final keyed cylinders after construction is complete. This
The means by influencing and regulating the flow of persons through system ensures that keys used during construction cannot operate after
a doorway final cylinders are installed.

ALL SECTION KEY BLANK CONSTRUCTION KEYING

The key section that enters all keyways of a Alternative method to a construction cylinder where the keyed cylinders
multiplex system. are supplied with a construction key system when it is removed prior to
building completion by the insertion of the owner key or by the removal
AUTHORIZED KEY CUTTER of a split key plug.
A business or person authorized by the lock cylinder manufacturer or
agent to cut or bit that manufacturers or agents restricted keys. CONSTRUCTION MASTER KEY (CMK)
A key normally used by construction personnel for a temporary
BARREL period during building construction. It may be rendered permanently
See plug inoperative without disassembling the cylinder.

BITTED KEY CONTROLLED CROSS KEYING

Generally means a cut key. A condition in which two or more different keys of the same level of
keying and under the same higher level key(s) operate one cylinder by
BITTING design. Note: This condition could severely limit the security of the cylinder
1. The number(s) that represent(s) the dimensions and the maximum expansion of the system when (1) more than a few of these
of the key. different keys operate a cylinder, or (2) more than a few differently cross
keyed cylinders per system are required.
2. The actual cut(s) or combination of a key.

CREDENTIAL
BITTING LIST

Glossary & Keying Levels

See Change Key
A listing of all the key combinations used within a system. The
combinations are usually arranged in order of the Bottom Pins and
CROSS KEYING
Master Pins.
The process of combinating a cylinder (usually in a master key system)
to two or more different keys which would not normally be expected to
BOW
operate it together. See also controlled cross keying and uncontrolled
The portion of the key that serves as a grip or handle.
cross keying.

BROACH
CUT KEY
A tool used to cut the keyway into a cylinder plug or barrel. A term also
A key that has been bitted or combinated.
used for the keyway shape.

CYLINDER
BUMPING
The assembly incorporating the key-operated mechanism.
One of many methods used to open locks with the use of bump keys
that leave no sign of physical attack.
CYLINDER CORE
See plug

For assistance, contact your local ASSA ABLOY Australia team. 13

 Glossary
DIFFERS INDIVIDUALLY KEYED
The variation between locks of similar design, which allow each lock to be See keyed to differ
operated only by its own key.
KEY
DIRECT KEY CODING The device that is intended to activate the lock mechanism or cylinder.
A code marked on a key or locks which, with no reference to another
series of codes, discloses the key cuts for creating a workable key. KEY BIT
Generally a cut in a key.
DISC
See tumbler KEY BITTING ARRAY (KBA)
A matrix (graphic) display of all possible bittings for change keys and master
DOUBLE-BITTED KEY keys as related to the top master key.
A key having bittings or cuts on two sides to actuate the tumblers of
the lock. KEY BLANK
An uncut key.
DUMMY CYLINDER
A non-functional facsimile of a rim or mortise cylinder used for appearance KEY CABINET
only, usually to conceal a cylinder hole. A cabinet with hooks, Velcro, or other means designed to store keys
systematically.
EFFECTIVE DIFFER
Difference between key mechanisms of similar design, achieved only by KEY CHANGES
the movable detainers, which allows each key mechanism to be operated The number of differs available within a key system.
only by its own key. The number of effective differs is equal to the number
of theoretical after deduction of the undesirables, suppressed by the KEY CODE
manufacturer due to technical constraints. A record of key bitting.

GRAND MASTER KEY (GMK) KEY CONTROL

A key, within a system, that operates all locks in a number of separate 1. Any method or procedure that limits unauthorized acquisition of a key
groups that have their own Master keys. and/or controls distribution of authorized keys.

2. A systematic organization of keys and key records.

GREAT GRAND MASTER KEY (GGMK)
The same as GMK but usually consisting of more than one GMK group,
KEY INTERCHANGE
which are then controlled by one GGMK key.
An undesirable condition, usually in a master key system, whereby a key
unintentionally operates a cylinder or lock.
GUEST KEY
A hotel/ motel rook key that is used by a guest, usually keyed to differ
KEY PROFILE
Glossary & Keying Levels

under a master key group.

The shape of the cross-section of the key that matches the broach.

HIGH SECURITY CYLINDER

KEY SECTION
A cylinder that offers a greater degree of resistance to any two or more
The exact cross sectional configuration of a key blade as viewed from the
of the following: picking, impressioning, key duplication, drilling or other
bow toward the tip.
forms of forcible entry.

KEY SYMBOL
HOUSING CYLINDER
A designation used for a key combination in the standard key coding
The part of a locking device that is designated to hold a core.
system, e.g. GMK, MK, 1-1, etc.

IMPRESSIONING
KEY SYSTEM
A method of determining the key cuts, using a key blank or similar device,
See maison key system, master key system and profile key system.
inserted in the keyway.

KEY SYSTEM SCHEMATIC

INDIRECT KEY CODING
A drawing with blocks utilizing keying symbols, usually illustrating the
A code marked on a key or lock, which requires reference to another series
hierarchy of all keys within a master key system. It indicates the structure
of codes to disclose the key cuts for creating a workable key.
and total expansion of the system.

14 For assistance, contact your local ASSA ABLOY Door Security Solutions team.
 Glossary
KEYED ALIKE (KA) MASTER KEY
Indicates identical key for two or more locks. 1. A key that operates all the master keyed locks or cylinders in a group,
each lock or cylinder usually operated by its own change key.
KEYED DIFFERENT (KD) 2. To combinate a group of locks or cylinders such that each is operated by
Of or pertaining to a group of locks or cylinders, each of which is or is to be its own change key as well as by a master key for the entire group.
combinated differently from the others. They may or may not be part of a
keying system.
MASTER KEY SYSTEM
A system where locks are passed by two levels of keys. The lower level of
KEYED TO DIFFER key (keyed to differ) fits only that lock or those locks keyed alike. The higher
Indicates that a different key is needed to activate each lock. level (master key) fits all locks in the system.

KEYED UNLOCKABLE MASTER KEYED

Indicates that the locking operation is activated without the aid of a key Of or pertaining to a cylinder or group of cylinders that are or are to be
and the unlocking operation is performed by a key. combinated so that all may be operated by their own change key(s) and by
additional key(s) known as master key(s).
KEYWAY
The opening in the plug that is shaped to accept a key blade of MULTI PROFILE KEY SYSTEM
proper configuration. 1. A series of different key sections that may be used to expand a master key
system by repeating bittings on additional key sections. The keys of one
KEYING key section will not enter the keyway of another key section. This type
Any specification for how a cylinder or group of cylinders are or are to be of system always includes another key section that will enter more than
combinated in order to control access. one, or all of the keyways.

2. A keying system that uses such keyways and key sections.

KEYING CONFERENCE
A meeting of the end-user and the keying system supplier at which the
PATTERN KEY
keying and levels of keying, including future expansion, are determined
1. An original key kept on file to use in a key duplicating machine when
and specified.
additional keys are required.

KEYING SCHEDULE 2. Any key that is used in a key duplicating machine to create a
A detailed specification of the keying system listing how all cylinders are to duplicate key.
be keyed and the quantities, markings, and shipping instructions of all keys
and/or cylinders to be provided. PIN TUMBLER
Usually a cylindrical shaped tumbler. Three types are normally used:
KEYWAY bottom pin, master pin and top pin.
1. The opening in a lock or cylinder that is shaped to accept the key bit or
blade of a proper configuration. PLUG / BARREL

Glossary & Keying Levels

The part of a cylinder that contains the keyway, with tumbler chambers
2. The exact cross sectional configuration of a keyway as viewed from the
usually corresponding to those in the cylinder shell.
front. It is not necessarily the same as the key section.

PROFILE KEY SYSTEM

LEVELS OF KEYING
See multi-element profile key system.
The divisions of a master key system into hierarchies of access, as shown on
page 5.
PROJECT KEYING
See construction keying.
LOCK SYSTEM
See key system.
RESTRICTED KEY
A key that can only be obtained though an authorization system.
MAISON KEY SYSTEM
A keying system where a group of different keys will operate a
RESTRICTED PROFILES
common lock.
Key profiles and broaches that are generally used in special keying systems
and are often the subject of registered design.

For assistance, contact your local ASSA ABLOY Australia team. 15

 Glossary
SELECTIVE MASTER KEY SURREPTITIOUS ENTRY
An unassociated master key that can be made to operate any specific The use of entry or bypass techniques that cannot be detected via
lock(s) in the entire system in addition to the regular master key(s) disassembly and detailed inspection of
and/or change key(s) for the cylinder without creating key interchange. lock components, eg. bumping.
Examples include:

- (ENG) Engineering key TAILPIECE

An actuator attached to the rear of the cylinder, parallel to the plug,
- (SEC) Security key typically used on rim, key-in-knob or special application cylinders.

TOP PIN
SERVANT KEY
The upper pins in a pin tumbler cylinder.
The individual key to a lock in a master key system.

TRACEABLE KEY
SERVICE KEY Also referred to as a restricted key. A key that is identifiable as part of a
See servant key. restricted key system. It is marked with a system number, a ranking and an
issue number.
SERVICES KEY
A servant key used to operate a number of locks (e.g. locks for fire TUMBLER
services, building services or emergency services). A component of a lock or cylinder that prevents operation of the lock
mechanism, except with insertion of the correct key. Tumbler may take
SHEAR LINE the form of pins, discs, levers, bars, wafer or detainers.
A location in a cylinder at which specific tumbler surfaces must be
aligned, removing obstruction(s) that prevent the plug from moving.
UNCONTROLLED CROSS KEYING
SHELL / HOUSING A condition in which two or more different change keys under different
The part of the cylinder that surrounds the plug and usually contains higher level keys operate one cylinder: e.g., X1-1-01, OB (operated by)
tumbler chambers corresponding to those in the plug. MK1, 1-1.* Note: This condition severely limits the security of the cylinder and
the maximum expansion of the system, and often leads to key interchange.
SINGLE KEY SECTION
An individual key section which can be used in a multiprofile key system. VISUAL KEY CONTROL (VKC)
A specification that all keys and the visible portion of the front of all lock
SIGNATORY cylinders be stamped with standard keying symbols.
The person (or persons) who controls and manages the key system.
WAFFER
SPOOL PIN See tumbler.
A double ended mushroom pin.
Glossary & Keying Levels

X
SKD Symbol used in hardware schedules to indicate a cross-keyed condition
Abbreviation for single keyed, normally followed by a numerical for a particular cylinder, e.g. X1-1-01, OB (operated by) 1-1-1, 1-1-2,
designation in the standard key coding system, e.g., SKD1, SKD2, etc. It MK1, GMK.
indicates that a cylinder or lock is not master keyed but is part of the
keying system. ZERO BITTED
Of or pertaining to a cylinder which is or is to be combinated to keys cut
to the manufacturers reference number 0 bitting.
STANDARD KEY CODING SYSTEM
An industry standard and uniform method of designating all keys and/or
cylinders in a master key system. The designation automatically indicates
the exact function and keying level of each key and/or cylinder in the
system, usually without further explanation.

16 For assistance, contact your local ASSA ABLOY Australia team.

 Levels of Keying
This chart shows the divisions of a master key system into
hierarchies of access. The standard key coding system has
been expanded to include key symbols for systems of more
than four levels of keying. For security reasons, systems
higher than four levels are not recommended.

Two Level System

Level of Keying Key Name Abbreviation Key Symbol
Level II Master Key MK MK1
Level I Change Key CK 1-1, 1-2, etc.

Three Level System

Level of Keying Key Name Abbreviation Key Symbol
Level III Grand Master Key GMK GMK
Level II Master Key MK MK1, MK2, etc.
Level I Change Key CK 1-1, 1-2, 2-1, 2-2, etc.

Four Level System

Level of Keying Key Name Abbreviation Key Symbol
Level IV Great Grand Master Key GGMK GGMK
Level III Grand Master Key GMK GMK1, GMK2, etc.
Level II Master Key MK MK1, MK2, etc.
Level I Change Key CK 1-1, 1-2, 2-1, 2-2, etc.

Five Level System*

Level of Keying Key Name Abbreviation Key Symbol
Level V Great Great Grand Master Key GGGMK GGGMK
Level IV Great Grand Master Key GGMK GGMK1, GGMK2, etc.

Glossary & Keying Levels

Level III Grand Master Key GMK GMK1, GMK2, etc.
Level II Master Key MK MK1, MK2, etc.
Level I Change Key CK 1-1, 1-2, 2-1, 2-2, etc.

Six Level System*

Level of Keying Key Name Abbreviation Key Symbol
Level VI Great Great Grand Master Key GGGMK GGMK
Level V Great Grand Master Key GGMK GGMK1, GGMK2, etc.
Level IV Grand Master Key GMK GMK1, GMK2, etc.
Level III Master Key MK MK1, MK2, MK3, etc.
Level II Sub-Master Key SMK SMK1, SMK2, etc.
Level I Change Key CK 1-1, 1-2, 2-1, 2-2, etc.
* Shown for example only, this level is not recommended for secured master key systems.

For assistance, contact your local ASSA ABLOY Australia team. 17

 System Design

18
KS.3 System Schematic Worksheet (Level 3)
Job Reference Instructions: Indicate the highest level master key symbol
Grand Master Key
in the top line of each box. Identify the area or department,
Information indicate the total number of key changes, including future Page of
expansion. Do not use letters I, O, or Q in key symbols.
Date By
Area/Dept.

Approved By Selective Control Key Used with IC cores only

Date Master Key CMK Construction Master Keying

Master Master Master Master Master Master

See next page for sample layout.

Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept.

Additional forms available separately.

# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes

Master Master Master Master Master Master

Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept.

# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes Direct

Special Changes directly

under the Top Master Key
Master Master Master Master Master Master
# of Changes

Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept.

System Design Worksheet

# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes

Master Master Master Master Master Master

Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept.

# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes

Single Keyed Changes Special Instructions

SKD SKD SKD
Door# or Area Door# or Area Door# or Area

Change key only, will not be operated by any other key within the system

For assistance, contact your local ASSA ABLOY Australia team.

NOTE: See glossary on pages 13-16 for terms and definitions.
 KS.3 System Schematic Worksheet (Level 3)
Job ReferenceUptown
p n Hospital
H p Instructions: Indicate the highest level master key symbol
Grand Master Key
in the top line of each box. Identify the area or department,
Information New
w Wing
Wng indicate the total number of key changes, including future Page of
expansion. Do not use letters I, O, or Q in key symbols.
GMK 1 1
Area/Dept.
Date 5/12/08
/ / By J. Smith
Approved By M. B
Blogs
g Top
p Selective Control Key Used with IC cores only
Master Key
CMK
x Construction Master Keying
Date 5/14/08 Master Key x
Master Master Master Master Master Master

MK1 MK5
Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept.

Perimeter Services
# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes

NOTE: See glossary on pages 13-16 for terms and definitions.

For assistance, contact your local ASSA ABLOY Australia team.
20 40
Master Master Master Master Master Master

MK2 MK6
Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept.

Core Areas Future

# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes Direct
20 20
Special Changes directly
under the Top Master Key
Master Master Master Master Master Master
# of Changes
MK3 MK7
Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. 6
Management
g Future
# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes

40 40
Master Master Master Master Master Master

MK4 MK8
Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept. Area/Dept.

Patient Service
Patient Services Future
# of Changes # of Changes # of Changes # of Changes # of Changes # of Changes

20 40
Single Keyed Changes Special Instructions
SKD SKD SKD
1 2 3
Door# or Area Door# or Area Door# or Area

Access Contro
Control Drugg Carts Pharmacyy
Change key only, will not be operated by any other key within the system
Sample System

19
System Design
 ASSA ABLOY is the global leader in door opening
solutions, dedicated to satisfying end-user needs
for security, safety and convenience.
ASSA ABLOY is represented in all major regions,
in both mature and emerging markets, with
leading positions in Australia, Europe and
North America.
As the worlds leading lock group, ASSA ABLOY
offers a more complete product range of door
opening solutions than any other company
in the market.

Head Office
ASSA ABLOY Australia Pty Limited
235 Huntingdale Road, Oakleigh
Victoria, 3166 Australia

1300 LOCK UP (1300 562 587)

info.au@assaabloy.com
assaabloy.com.au
ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 20010 MS0923