ExplodedView and Parts list

5. Exploded Views and Parts List

Contents
5.1 Main Assembly 5-2

5.2 Frame Assembly(ML-2240) 5-5

5.3 Frame Assembly(ML-1640) 5-7

5.4 Fuser Unit 5-9

5.5 Paper Path Unit 5-11

5.6 MP Tray Assembly (Only ML-2240) 5-13

LASER PRINTER The keynote of Product

- Speed
ML-1640 : 16 ppm (A4), 17 ppm( Ltr)
ML-2240 : 22ppm (A4), 23 ppm (Ltr)

- Emulation : GDI

- Processor : 150 Mhz Jupiter4e CPU

- Memory : 8 MB

- Toner cartridge : Initial (0.7K), Sales (1.5K)

- MP tray : Only ML-2240

- Interface : Full Speed USB 2.0

- Machine life : 50K (pages)

5-1
Service Manual Samsung Electronics
 ExplodedView and Parts list

5.1 Main Assembly

24

2-1

2-2
2-4

2-5
2

2-6
0
2-7
2-8

2-9

2-3
2-10
5

5-1
9
4 14

7
12
11

10

8
1
17
21

15-1
15-2
15 16

13
20

6 3-5 3-3

19

3-4 18

3-2

3
3-1

5-2
Service Manual Samsung Electronics
 ExplodedView and Parts list

Main Parts List

*SA : SERVICE AVAILABLE, SNA : SERVICE not AVAILABLE
*Grade : Parts ClassA,B,C,D,E
Drawer# SEC_CODE DESCRIPTION QTY Service Grade Remark
5.1-0 ML-2240 SET
5.1-0 ML-1640 SET
5.1-1 JC96-05123A ELA UNIT-FRAME 1 SA A 2240
5.1-1 JC96-05120A ELA UNIT-FRAME 1 SA A 1640
5.1-2 JC97-03181A MEA-COVER MAIN 1 SA A 1640
5.1-2 JC97-03182E MEA-COVER MAIN 1 SA A 1645
5.1-2-1 JC61-01460D GUIDE-STACKER COVER 1 SNA B 1640
5.1-2-1 JC61-01460E GUIDE-STACKER COVER 1 SNA B 1645
5.1-2-2 JC63-01886A COVER-TOP 1 SA B 1640
5.1-2-2 JC63-01886M COVER-TOP 1 SA B 1645
5.1-2-3 JC63-01887A COVER-MAIN 1 SA B 1640
5.1-2-3 JC63-01887B COVER-MAIN 1 SA B 1645
5.1-2-4 JC63-01888A COVER-JAM 1 SA B 1640
5.1-2-4 JC63-01888B COVER-JAM 1 SA B 1645
5.1-2-5 JC72-01343A PMO-SUB_M_STACKER 2 SA D
5.1-2-6 JC64-00406A KEY-ONLINE 1 SNA D
5.1-2-7 6107-001169 SPRING-CS 1 SA B
5.1-2-8 JC67-00301A LENS-LED 1 SA B
5.1-2-9 JC66-02005A ACTUATOR-JAM 1 SNA B
5.1-2-10 JC61-00049A SPRING ETC-TR(KOR) 1 SNA B
5.1-3 JC97-03183A MEA UNIT-COVER FRONT 1 SA B 1645
5.1-3 JC97-03184A MEA UNIT-COVER FRONT 1 SA B 1640
5.1-3-1 JC63-01883A COVER-FRONT 1 SA B 1640
5.1-3-1 JC63-01883B COVER-FRONT 1 SA B 1645
5.1-3-2 JC63-01885A COVER-CASSETTE 1 SA B 1640
5.1-3-2 JC63-01885B COVER-CASSETTE 1 SA B 1645
5.1-3-3 JC63-01890A COVER-DUMMY CASSETTE 2 SA B 1640
5.1-3-3 JC63-01890B COVER-DUMMY CASSETTE 2 SA B 1645
5.1-3-4 JC63-00628F TRAY-EXTENSION LARGE 1 SA B
5.1-3-5 JC63-00629F TRAY-EXTENSION SMALL 1 SA B
5.1-4 JC96-04065A ELA UNIT-LSU 1 SA A
5.1-5 JC63-01892A COVER-SMPS 1 SA B 1640
5.1-5 JC63-01892B COVER-SMPS 1 SA B 1645
5.1-5-1 JC31-00092A FAN 1 SA A
5.1-6 JC96-05045A CARTRIDGE-TONER 1 SNA B 1640/2240

5-3
Service Manual Samsung Electronics
 ExplodedView and Parts list

Main Parts List

*SA : SERVICE AVAILABLE, SNA : SERVICE not AVAILABLE
*Grade : Parts ClassA,B,C,D,E
Drawer# SEC_CODE DESCRIPTION QTY Service Grade Remark
5.1-7 JC96-05121A ELA HOU-FUSER 1 SA A 1640/110V
5.1-7 JC96-05122B ELA HOU-FUSER 1 SA A ML-1640/XIP
5.1-7 JC96-05124A ELA HOU-FUSER 1 SA A 2240/110V
5.1-7 JC96-05125A ELA HOU-FUSER 1 SA A 2240/220V
5.1-8 JC63-01930A SHIELD-ENGINE 1 SA B
5.1-9 JC39-00936A HARNESS-LSU 1 SA B
5.1-10 JC44-00109A SMPS-V1_VE 1 SA A 1640/110V
5.1-10 JC44-00110A SMPS-V2C_VE 1 SA A 1640/220V
5.1-10 JC44-00086A SMPS-V1 1 SA D 2240/110V
5.1-10 JC44-00087A SMPS-V2C 1 SA D 2240/220V
5.1-11 JC92-02027A PBA-MAIN 1 SA B

5.1-11 JC92-02018A PBA-MAIN 1 SA B

5.1-12 JC39-00937A HARNESS-MOTOR 1 SA B 1640

5.1-12 JC39-00932A HARNESS-MOTOR 1 SA B 2240
5.1-13 JC39-00400A CBF HARNESS-HVPS 1 SA A
5.1-14 JC39-00402A CBF HARNESS-SMPS 1 SA A
5.1-15 JC96-01672A ELA UNIT-TERMINAL TR L 3 SA D
5.1-15-1 JC61-00031A SPRING ETC--HV LARGE 1 SNA A
5.1-15-2 JC70-40912A ICT-SHAFT HV LARGE 1 SA D
5.1-16 JC44-00167A HVPS 1 SA A
5.1-17 JC63-00631A GROUND-P-HVPS 2 SNA A
5.1-18 3903-000042 CBF-POWER CORD 1 SA B 220V
5.1-18 3903-000085 CBF-POWER CORD 1 SA B 110V
5.1-19 3722-002303 JACK-USB 1 SA A
5.1-20 JC97-02239G MEA UNIT-MP TRAY 1 SA A 2240
5.1-21 JC31-00085A FAN-DC 1 SA A

5-4
Service Manual Samsung Electronics
 ExplodedView and Parts list

5.2 Frame Assembly (ML-2240)

6
0

13

15
14
2-3
2-2

16

4
2-4
2-1

10
2-3
2

3
5-7

7
5-6

11

10
5-5

12

1
5-4
5-2

8
5-3

5
5-1

5-5
Service Manual Samsung Electronics
 ExplodedView and Parts list

Frame Parts List(ML-2240)

*SA : SERVICE AVAILABLE, SNA : SERVICE not AVAILABLE
*Grade : Parts ClassA,B,C,D,E
Drawer# SEC_CODE DESCRIPTION QTY Service Grade Remark
5.2-0 JC96-05123A ELA UNIT-FRAME 1 SA A
5.2-1 JC61-02567A FRAME-BASE 1 SA A
5.2-2 JC97-02218A MEA UNIT-PLATE KNOCK_UP 1 SA A
5.2-2-1 JC61-01158A PLATE-M-KNOCK_UP 1 SA A
5.2-2-2 JC66-00720A SHAFT-P-CORE 1 SA A
5.2-2-3 JC72-01004A PMO-IDLE KNOCK UP MP 2 SA A
5.2-2-4 JC74-00011A MPR-PAD KNOCK UP MP 1 SA A
5.2-3 JC61-01258A SPRING ETC-TORSION DEVE_L 1 SA A
5.2-4 JC61-01259A SPRING ETC-TORSION DEVE_R 1 SA A
5.2-5 JC96-05018A ELA UNIT-DRIVE 1 SA A
5.2-5-1 JC61-02619A BRACKET-GEAR 1 SNA D
5.2-5-2 JC61-02577A BRACKET-MOTOR 1 SNA B
5.2-5-3 JC66-01998A GEAR-RDCN A 1 SNA B
5.2-5-4 JC31-00090B MOTOR BLDC 1 SNA A
5.2-5-5 JC66-01999A GEAR-RDCN B 1 SNA B
5.2-5-6 JC66-00806A GEAR-OPC DR 76/38/29 1 SA A
5.2-5-7 6031-000023 WASHER-PLAIN 2 SA A
5.2-6 JC97-02218A MEA UNIT-PLATE KNOCK_UP 1 SA A
5.2-7 JC70-00500C ADJUST-CASSETTE_R 1 SA A
5.2-8 JC70-00499C ADJUST-CASSETTE_L 1 SA A
5.2-9 JG66-40003A GEAR-PINION 1 SA A
5.2-10 JC61-00836A FOOT-FRONT 2 SA A
5.2-11 JC66-00807A GEAR-FUSER DR 63/35 1 SA A
5.2-12 JC66-00808A GEAR-FEED DR 41 1 SA A
5.2-13 JC66-00822A LEVER-M-ACTUATOR_EMPTY 1 SA A
5.2-14 JB61-00076A SPRING ETC-TORSION DOC (CC2-F) 1 SA A
5.2-15 JC63-00622A GROUND-P-OPC 1 SA A
5.2-16 6107-001503 SPRING-CS 2 SA A

5-6
Service Manual Samsung Electronics
 ExplodedView and Parts list

5.3 Frame Assembly(ML-1640)

6
0

15

17
16
2-3

20
2-2

4
2-4

10
2-1
2-3

3
2

7
5-4

13

12

10
5-2
5-3

14

1
5-1

11

8
5

19

5-7
Service Manual Samsung Electronics
 ExplodedView and Parts list

Frame Parts List(ML-1640)

*SA : SERVICE AVAILABLE, SNA : SERVICE not AVAILABLE
*Grade : Parts ClassA,B,C,D,E
Drawer# SEC_CODE DESCRIPTION QTY Service Grade Remark
5.3-0 JC96-05120A ELA UNIT-FRAME 1 SA A
5.3-1 JC61-01152A FRAME-M-BASE 1 SNA A
5.3-2 JC97-02218A MEA UNIT-PLATE KNOCK_UP 1 SA A
5.3-2-1 JC61-01158A PLATE-M-KNOCK_UP 1 SA A
5.3-2-2 JC66-00720A SHAFT-P-CORE 1 SA A
5.3-2-3 JC72-01004A PMO-IDLE KNOCK UP MP 2 SA A
5.3-2-4 JC74-00011A MPR-PAD KNOCK UP MP 1 SA A
5.3-3 JC61-01258A SPRING ETC-TORSION DEVE_L 1 SA A
5.3-4 JC61-01259A SPRING ETC-TORSION DEVE_R 1 SA A
5.3-5 JC96-05116A ELA UNIT-DRIVE 1 SA A
5.3-5-1 JC61-01153A BRACKET-P-GEAR 1 SNA A
5.3-5-2 JC61-01154A BRACKET-P-MOTOR 1 SNA A
5.3-5-3 JC66-00804A GEAR-RDCN 139/83 1 SA A
5.3-5-4 JC31-00112A MOTOR STEP 1 SA A
5.3-6 JC97-02218A MEA UNIT-PLATE KNOCK_UP 1 SA A
5.3-7 JC70-00500C ADJUST-CASSETTE_R 1 SA A
5.3-8 JC70-00499C ADJUST-CASSETTE_L 1 SA A
5.3-9 JG66-40003A GEAR-PINION 1 SA A
5.3-10 JC61-00836A FOOT-FRONT 2 SA A
5.3-11 JC66-00805A GEAR-RDCN 113/83 1 SA A
5.3-12 JC66-00806A GEAR-OPC DR 76/38/29 1 SA A
5.3-13 JC66-00807A GEAR-FUSER DR 63/35 1 SA A
5.3-14 JC66-00808A GEAR-FEED DR 41 1 SA A
5.3-15 JC66-00822A LEVER-M-ACTUATOR_EMPTY 1 SA A
5.3-16 JB61-00076A SPRING ETC-TORSION DOC (CC2-F) 1 SA A
5.3-17 JC63-00622A GROUND-P-OPC 1 SA A
5.3-18 JC61-00025A SPRING ETC-CS-CHARGE APOLLO 2 SNA A
5.3-19 JC67-00110A CAP-M-MOTOR 1 SNA A

5-8
Service Manual Samsung Electronics
 ExplodedView and Parts list

5.4 Fuser Unit

7
28

13
26

9
30

14
3

10
6
32

7
1
4

12
11

23
27

23
5
15
0

17
16

21
18
19
24
25

29

20

31

5-9
Service Manual Samsung Electronics
 ExplodedView and Parts list

Fuser Parts List

*SA : SERVICE AVAILABLE, SNA : SERVICE not AVAILABLE
*Grade : Parts ClassA,B,C,D,E
Drawer# SEC_CODE DESCRIPTION QTY Service Grade Remark
5.4-0 JC96-05121A ELA HOU-FUSER 1 SA A 1640/110V
5.4-0 JC96-05122A ELA HOU-FUSER 1 SA A ML-1640/XSA
5.4-0 JC96-05124A ELA HOU-FUSER 1 SA A 2240/110V
5.4-0 JC96-05125A ELA HOU-FUSER 1 SA A 2240/220V
5.4-1 JC61-01162A FRAME-P-FUSER 1 SNA A
5.4-2 JC63-00615A COVER-M_FUSER 1 SNA D
5.4-3 JC61-01177A HOLDER-M-EXIT R 2 SA A
5.4-4 JC66-00810A GEAR-EXIT_DRV17 1 SA B
5.4-5 JC61-01172A HOLDER-M-EXIT F/DOWN 3 SNA A
5.4-6 6107-001168 SPRING-CS 2 SA D
5.4-7 JC66-10901A BUSH-PRESSURE R 2 SA A
5.4-8 JC61-00595A GUIDE-M-INPUT 1 SNA A
5.4-9 JC66-00600A ROLLER-PRESSURE 1 SA A

5.4-10 JC66-00601B ROLLER-HEAT 1 SA A

5.4-11 JC66-00564A GEAR-FUSER Z37 1 SA D

5.4-12 JC61-00589A BUSH-M-HR L 1 SA A
5.4-13 JC61-00590A BUSH-M-HR R 1 SA A
5.4-14 4713-001202 LAMP-HALOGEN 1 SA A 1640/220V
5.4-14 4713-001203 LAMP-HALOGEN 1 SA A 1640/110V
5.4-14 4713-001211 LAMP-HALOGEN 1 SA A 2240/110V
5.4-14 4713-001212 LAMP-HALOGEN 1 SA D 2240/220V
5.4-15 JC66-00824A ROLLER-M-EXIT MAIN 3 SA D
5.4-16 JC66-00830A ROLLER-M-EXIT FR 3 SA D
5.4-17 6107-001163 SPRING-CS 3 SA D
5.4-18 1404-001451 THERMISTOR-NTC ASSY 1 SA A
5.4-19 4712-001032 THERMOSTAT 1 SA A
5.4-20 JC39-00404A CBF HARNESS-FUSER JOINT 1 SA A
5.4-21 JC39-00403A CBF HARNESS-FUSER(110V) 1 SA A 110V
5.4-21 JC39-00403B CBF HARNESS-FUSER(220V) 1 SA A 220V
5.4-22 JC61-00064A SPRING ETC-CLAW 4 SA A
5.4-23 JC61-02580A GUIDE-CLAW 4 SA A
5.4-24 JC66-00801A GEAR-EXIT_DR38/25 1 SNA D
5.4-25 6031-001051 WASHER-PLAIN 1 SNA A
5.4-26 JC63-00637A COVER-M-FUSER-DUMMY 1 SNA D
5.4-27 JC63-00639A COVER-M-LAMP-L 1 SNA D
5.4-28 JC63-00638A COVER-M-LAMP-R 1 SNA D
5.4-29 6044-000001 RING-CS 1 SNA B
5.4-30 JC66-00826A ROLLER-EXIT F/DOWN 1 SA A
5.4-31 JC67-00085A CAP-M-THERMO 1 SNA A

5-10
Service Manual Samsung Electronics
 ExplodedView and Parts list

5.5 Paper Path Unit

16

0
14

17

25 16
15

12
28 4
5

11-3
11-2
3 2
11-1
11
6

13

1
10

9-2 10

9-1

18
9
29
19 9-3
24 7
21

22

8
20

23

27
25

5-11
Service Manual Samsung Electronics
 ExplodedView and Parts list

Paper Path Parts List

*SA : SERVICE AVAILABLE, SNA : SERVICE not AVAILABLE
*Grade : Parts ClassA,B,C,D,E
Drawer# SEC_CODE DESCRIPTION QTY Service Grade Remark
5.5-0 JC97-03248A MEA UNIT-FRAME PAPER PATH 1 SA B 1640
5.5-0 JC97-03199A MEA UNIT-FRAME PAPER PATH 1 SA B 2240
5.5-1 JC61-01161A GUIDE-M-PAPER PATH 1 SA A
5.5-2 JC66-00814A LEVER-ACTUATOR FEED SENSOR 1 SA A
5.5-3 JB61-00107A SPRING ETC-LEVER SENSOR 1 SA A
5.5-4 JC70-10232A IPR-PLATE SAW 1 SA D
5.5-5 JC63-00625A GROUND-P-VARISTOR 1 SNA A
5.5-6 JC63-00624A GROUND-P-ZENER 1 SA A
5.5-7 JC63-00623A GROUND-P-THV 1 SNA A
5.5-8 JC63-00626A GROUND-P-SAW 1 SNA A
5.5-9 JC97-02217A MEA-UNIT HOLDER PAD 1 SA A
5.5-9-1 JC61-70911A SPRING ETC-EXIT ROLL FD 2 SA A
5.5-9-2 JC69-01568A PAD-FRICTION 1 SNA B
5.5-9-3 JC61-01169A HOLDER-M-PAD 1 SA A
5.5-10 JC66-00815A LEVER-M-KICKER P/U 2 SA D
5.5-11 JC97-02179A MEA UNIT-PICK UP GEAR 1 SA A
5.5-11-1 JC66-00803A GEAR-PICK_UP B 1 SA A
5.5-11-2 JC66-00802A GEAR-PICK_UP A 1 SA A
5.5-11-3 6107-001167 SPRING-CS 1 SA D
5.5-12 JC33-00028B SOLENOID-MP 1 SA A
5.5-13 JC66-00809A GEAR-FEED 35/19 1 SA A
5.5-14 JC61-00588A BUSH-M-TR L 1 SA A
5.5-15 JC72-00102A PMO-BUSHING_TR(L) 1 SA A
5.5-16 JC61-70940A SPRING ETC-TR(12) 2 SA A
5.5-17 JC66-00725A ROLLER-TRANSFER 1 SA A
5.5-18 JC61-00583A HOLDER-PTL 1 SA A
5.5-19 JC70-00307A IPR-P-EARTH TRANSFER 1 SA A
5.5-20 JC66-00829A SHAFT-P-PICK_UP 1 SA B
5.5-21 JC61-01151A HOUSING-M-PICK_U 1 SA A
5.5-22 JC61-01173A HOUSING-M-PICK_UP B 1 SA A
5.5-23 JC73-00211A RUBBER-PICK_UP 1 SA A
5.5-24 JC66-01935A CAM-PICKUP L 1 SA B
5.5-25 JC66-01936A CAM-PICKUP R 1 SA B
5.5-26 JC66-00813A GEAR-TRANSFER 1 SA A
5.5-27 JC61-01281A BRACKET-P-BAR_PICK_UP 1 SNA A
5.5-28 JC39-00482A CBF HARNESS-MICRO SW 1 SA A
5.5-29 JC61-01548A HOLDER-M-CAM 1 SNA A 2240

5-12
Service Manual Samsung Electronics
 ExplodedView and Parts list

5.6 MP Tray Assembly (Only ML-2240)

5-13
Service Manual Samsung Electronics
 ExplodedView and Parts list

MP Tray Parts List

*SA : SERVICE AVAILABLE, SNA : SERVICE not AVAILABLE
*Grade : Parts ClassA,B,C,D,E
Drawer# SEC_CODE DESCRIPTION QTY Service Grade Remark
5.6-0 JC97-02239G MEA UNIT-MP TRAY 1 SA B
5.6-1 JC61-01263F PLATE-MP 1 SA B
5.6-2 JC70-00514E ADJUST-MP L 1 SA B
5.6-3 JC70-00515E ADJUST-MP R 1 SA B
5.6-4 JG66-40003A GEAR-PINION 1 SA B
5.6-5 JC63-00711A SHEET-MP 1 SA B

5-14
Service Manual Samsung Electronics
 System Diagram

6. System Diagram

Block / Connection Diagram_Peacock22 / Robin

LSU
INLET Main
S/W
PICK_UP_CLT

SMPS

C
FUSER_FAN

LD_ENABLE
DAC_OUT
nPMOTOR
nLREADY
LSU_CLK

nHSYNC

LSU_SH
Fuser_On
nP_FEED
24V 24VS1

24VS2
24VS2

24VS1
24VS1

DGND
DGND

DGND
SOL

VDO+

VDO-
N.C

GND

N.C

5VS
5V
Feed_Sensor

DC

nLED_ERROR nLED_ERROR BLDC_DIR

nP_FEED
Fuser_On
FAN_Vcc

DAC_OUT
DGND
nHSYNC

VDO+
LD_ENABLE
nLED_READY BLDC_CLK

VDO-
5VS
24VS2

24VS2
PickUp_Sol
nLREADY
nLED_READY

GND
LSU_CLK

LSU_SH
nPMOTOR
3.3V Reg

N.C
GND

24VS2

24VS1
24VS1

DGND
DGND
nKEY_IN BLDC_READY

N.C
nKEY_IN

5V
DC

nLED_TONER nLED_TONER BLDC_EN

THV nP_EMPTY nP_EMPTY DGND MT
N.C
1.8V Reg BLDC_BREAK
N.C
MHV BIAS_PWM BIAS_PWM DGND
nFUSER_FAN nFUSER_FAN DGND
24VS2

SDRAM
SUP MHV_PWM MHV_PWM
12MHz MAIN_MOTOR

8MB
THV_READ THV_READ Jupiter4e 24VS2
DEV THV_PWM THV_PWM
Robin Only
nTHV_EN nTHV_EN
OPC 5V 5V CY25811 5V
TONER_TX

24VS2 / nNEW_DEV (Robin Only)

nP_EXIT nP_EXIT
3.3V 3.3V nCRU_DET (Peacock22 Only) nTONER_RX
DGND DGND DGND TONER_TX_RX
24VS2 24VS2
24VS2 24VS2 nCRU_DET
Ready/Error Toner

THERMISTOR_IN
24VS1 24VS1 N.C
24VS1 24VS1 GND MICRO S/W
HVPS

DEV_DATA

DCU_DATA
DEV_CLK

DCU_CLK
FAN_Vcc

DGND
3.3V

DGND
VBUS

4
3
2
1
3.3V
DGND
GND
GND

GND

GND

GND

N.C

a4
a3
a2
a1
HYPER_TXD

5V
D+

N.C
D-

HYPER_RXD

b4
b3
b2
b1
24VS1 24VS2 DGND

8
7
6
5
HYPER

USB DEVE Peacock Hardware Team

SMPS_FAN Digital Priting Div.
THERMISTOR CRUM DCU Samsung Electronics
Jan.21.2008

6-1
Service Manual Samsung Electronics
 Reference information

7. Reference Information
This chapter contains the tools list, list of abbreviations used in this manual, and a guide to the
location space required when installing the printer. A definition of tests pages and Wireless
Network information definition is also included.

7.1 Tool for Troubleshooting

The following tools are recommended safe and easy troubleshooting as described in this service manual.

DCU (Diagnostic Control Unit) Cotton Swab

Standard : Test equipment to diagnose the Laser Standard : For general home use, for medical service.
printer supplied by Samsung Electronics.

Cleaning Equipments
Standard : An IPA(Isopropyl Alcohol)dry wipe tissue or
a gentle neutral detergent and lint-free cloth.

DVM (Digital Volt Meter)

Standard : Indicates more than 3 digits.

Vacuum Cleaner

Driver
Standard : "-" type, "+" type (M3 long, M3 short, M2
long, M2 short).

Software (Driver) installation CD ROM

Tweezers
Standard : For general home use, small type.

7-1
Service Manual Samsung Electronics
 Reference information

7.2 Acronyms and Abbreviations(1)

The table below explains the abbreviations and acronyms used in this service manual. Where abbreviations
or acronyms are used in the text please refer to this table.

Abbreviations Explanation

AP Access Point
AC Alternating Current
APC Auto Power Control
ASIC Application Specific Integrated Circuit
ASSY assembly
BIOS Basic Input Output System
BLDC Brush-less Direct Current
CMOS Complementary Metal Oxide Semiconductor
CN connector
CON connector
CPU Central Processing Unit
dB decibel
dbA decibel A
dBM decibel milliwatt
DC direct current
DCU Diagnostic Control Unit
DPI Dot Per Inch
DRAM Dynamic Random Access Memory
DVM Digital Voltmeter
ECP Enhanced Capability Port
EDC Embedded Diagnostic control
EEPROM Electronically Erasable Programmable Read Only Memory
EMI Electro Magnetic Interference
EP electrophotographic
EPP Enhanced Parallel Port
FPOT First Printout Time
F/W firmware
GDI graphics device interface
GND ground
HBP Host Based Printing
HDD Hard Disk Drive
H/H High temperature and high marshy place
HV high voltage
HVPS High Voltage Power Supply
I/F interface
I/O Input and Output
IC integrated circuit
IDE Intelligent Drive electronics or Imbedded Drive Electronics

7-2
Service Manual Samsung Electronics
 Reference information

Acronyms and Abbreviations(2)

Abbreviations Explanation

IEEE Institute of Electrical and Electronics Engineers. Inc

IPA Isopropy Alcohol
IPM Images Per Minute
LAN local area network
lb pound(s)
LBP Laser Beam Printer
LCD Liquid Crystal Display
LED Light Emitting Diode
L/L Low temperature and low marshy place
LSU Laser Scanning Unit
MB megabyte
MHz megahertz
MPF Multi Purpose Feeder
NIC Network Interface Card
N/N Normal temperature and normal marshy place
NVRAM nonvolatile random access memory
OPC Organic Photo Conductor
OPE Operate Panel Equipment
PBA Printed Board Assembly
PCL Printer Command Language , Printer Control Language
PDL Page Discription Language
PPM Page Per Minute
PPS Pulse Per Second
PS Post Script
PTL Pre-Transfer Lamp
PWM Pulse Width Modulation
Q-PID Quick Printer Initiating Device
Q ty quantity
RAM Random Access Memory
ROM Read Only Memory
SCF Second Cassette Feeder
SMPS Switching Mode Power Supply
SPGP Samsung Printer Graphic Processor
SPL Samsung Printer Language
Spool Simultaneous Peripheral Operation Online
SW switch
sync synchronous or synchronization
USB Universal Serial Bus
WECA Wireless Ethernet Compatibility Alliance

7-3
Service Manual Samsung Electronics
 Reference information

7.3 Selecting printer locations

Leave enough room to open the printer trays, covers, and allow for proper ventilation. (see diagram
below)

Provide the proper environment :

- A firm, level surface
- Away from the direct airflow of air conditioners, heaters, or ventilators
- Free of extreme fluctuations of temperature, sunlight, or humidity
- Clean, dry, and free of dust

7-4
Service Manual Samsung Electronics
 Reference information

7.4 Sample Tests Patterns

The sample patterns shown below are the standard test patterns used in the factory.
The life of the toner cartridge, developer cartridge and printing speed are measured with the pattern shown
below (5%). The A4 ISO 19752 standard pattern samples are reproduced reduced to 70% of the actual A4
size.

A4 ISO 19752 Standard Patterns

7-5
Service Manual Samsung Electronics
 Reference information

7.5 Parts Life Cycle Maintenance Table

7.5.1 Parts Life Cycle Maintenance Table

Supplies Life Cycle Condition Panel LED Custmoer - Responding

Panel Manage
Toner Cartridge 1.5K: For Product Toner Low Toner LED : Red LED blinking - 10% Remains
0.7K: For Sale Toner Uninstall Online /Error LED : Red -
Fuser 50,000(page) Thermistor Open Error On line/Error LED : Red Replaced at
(DCU Code : 60) Exhauseted
Low Heat Error On line/Error LED : Red Replaced at
(DCU Code : 62) Exhauseted
Over Heat Error On line/Error LED : Red Replaced at
(DCU Code : 68) Exhauseted
Transer Roller 50,000(page) Exhauseted No Indication Replaced at
Exhauseted
PickUP Roller 50,000(page) Exhauseted No Indication Replaced at
Exhauseted

7.5.2 Toner Cartridge Criterion

1) Supplies Criterion (Toner Cartridge)
1. Cartridge Main Defects
- White Point, Black Point : White or Black point on printing image
- Image contamination : Dirty printing image
- Image Fainted : Entire Image is fainted and vertical white line emerge

- Black Line : Vertical black line emerge on printing image

2) Defect Symptoms

Symptoms Criterion Remarks

White, Black Point Clean Up OPC (10 times), if disappeared, no failure. System Setup ->
- If continuous, failure Maintenance-> Clean Drum
Image contamination Drity printing image or conteminated reverse side
(Toner leakage) - Clean up OPC (10 times) and inside of machine with cloth, if disappeared, no failure.
Image Fainted After shake cartridge right and left 5~6 times, if printing image is not fainted, no failure.
(Toner Exhausted)
Vertical Black Line Vertical thin line emerge, if cartridge is scratched.
- (Customer fault)

7-6
Service Manual Samsung Electronics
 Reference information

7.6 Model Information

7.6.1 Understanding for Model Code

Model code is inscribed and managed by product standard operation.
If understand the standard operation. It will help to comprehend basic and derived model.

Classification Model abbriviation Feature/Properties

DIGIT 1 2 3 4 5 6 7 8 9 10
Example M L - 1 6 4 0

Definition Product Classification Color 1. Speed of Engine 1.New model, 1. Basic : 0 Main feature Space
Product - If same speed models series model description (Basic:Omitt
are released division 2.Series - N : N/W ed)
Code Printer Laser Default = simultaneously higher - Over 3rd grade model divi- - P : PS
Description Class of Beginning Omissoin. model is added +1 at project sion - S : N/W+PS
Product letter of Only color speed code. - Below 4th - B : Bluetooth
Description printer printer - If over 10 models with 2.Valuablet grade - T : 2nd CST
:M Description: C initial Division same speed are brought model division project - M : Mac
L .Engine = E between into, tenth model is in market .PC Bundle Compatible
code added +1. despite of not .Domestic - X : Scanner
over 3rd grade distribution . Beside
2. Domestic Entry Model - VE model, etc. (Entry model abovefeature
Distribution (Valuable model excepted) description,
- C&C : Engine speed is decided product
- Information : The first byproduct conception
number deleted planning group to product
with sales planning
prospect) group
responsed

Description Alphabet - Digit Alphabet

Classification Model abbriviation Feature/Properties

DIGIT 1 2 3 4 5 6 7 8 9 10
Example M L - 2 2 4 0

Definition Product Classification Color 1. Speed of Engine 1.New model, 1. Basic : 0 Main feature Space
Product - If same speed models series model description (Basic:Omitt
are released division 2.Series - N : N/W ed)
Code Printer Laser Default = simultaneously higher - Over 3rd grade model divi- - P : PS
Description Class of Beginning Omissoin. model is added +1 at project sion - S : N/W+PS
Product letter of Only color speed code. - Below 4th - B : Bluetooth
Description printer printer - If over 10 models with 2.Valuablet grade - T : 2nd CST
:M Description: C initial Division same speed are brought model division project - M : Mac
L .Engine = E between into, tenth model is in market .PC Bundle Compatible
code added +1. despite of not .Domestic - X : Scanner
over 3rd grade distribution . Beside
2. Domestic Entry Model - VE model, etc. (Entry model abovefeature
Distribution (Valuable model excepted) description,
- C&C : Engine speed is decided product
- Information : The first byproduct conception
number deleted planning group to product
with sales planning
prospect) group
responsed

Description Alphabet - Digit Alphabet

7-7
Service Manual Samsung Electronics
 Reference information

7.6.2 Understanding Material Code & Name

Material code and name is maintained by standard criteria.
If understand the criteria, it will help to order materials.

1. Two different description ways for material code. ( : Digit, : Letter(Alphabet))

- Type 1 - ex) 2007-007961 R-CHIP
- Type 2 - ex)JB96-01268A ELA UNIT-COVER TOP

Type 1 : Parts managed by entire divisions : Materials used by all samsung products.
Most electrical parts are under the type 1.
Type 2 : Parts managed by a division : Material used by a certain product
Most mechanical parts are under type 2.

2. A/S Only material : Only for A/S, not related to product manufacturing.

3. Ass'y material : More than two materials are assembled. If the material order is out of service, the order can be
processed by Ass'y material order.
Picture and numbers are also described on Service manual.

Ass'y Material and A/S Only material Code are recognizable by product name.
Those are under type 2 and known by material properties and beginning letters of product name.

Classification Material Code Material Name

A/S Only Material **81-******(JB81-00039A) AS-*****(AS-FUSE)
A/S Only Material **75-******(JB75-00068A) MEC-*****(MEC-CHUTE)
A/S Only Material **92-******(JB92-01131A) PBA-*****(PBA MAIN-CONTROLLER)
A/S Only Material **96-******(JB96-01268A) ELA-*****(ELA UNIT-COVER TOP)
A/S Only Material **97-******(JB97-01089A) MEA-*****(MEA UNIT-PULLEY IDLE)

7.6.3 F/W Upgrade Method

If F/W needs Upgrade, F/W file and usbprn file are requested.

Check "Ready" condition with power ON.

1. Paralle cable case

Start Download Rom file with "copy/b b255_706.fls lpt1:" commend on Dos Mode.
Once Download are finished, "Reset Printer" is indicated on LCD window.
Download finished Power ON/OFF.

2. USB cable case (Save attached file at certain directory)

Start Download Rom file "usbprbs b255_706.fls" on Dos Mode and push the enter key.
Once Download are finished, "Reset Printer" is indicated on LCD window.
Download finished Power ON/OFF.

7-8
Service Manual Samsung Electronics