SmartPTT Basic Dispatcher User Guide

Version 9.
SmartPTT Basic
Dispatcher User Guide
December 2016
Table of Contents
Table of Contents
1 SmartPTT Dispatcher 4
1.1 SmartPTT Dispatcher Interface 4

1.1.1 Change Layout 6
1.2 Map 7
1.2.1 Raster Map 13
1.2.2 Raster Maps From Database 14
1.2.3 Indoor Tracking 16
1.2.4 Geofences 22
1.2.5 Points of Interest 23
1.2.6 Routes 25
1.2.7 Show Track 28
1.2.8 Animate Track 29
1.2.9 Coverage Map 31
1.3 Event Log 34
1.4 Tools 42
1.4.1 Calls 43
1.4.2 Sound 44
1.4.3 Cross Patches 45
1.4.4 Radio Fleet 48
1.4.5 Channels 67
1.4.6 Subscribers 68
1.4.7 Job Tickets 69
1.4.8 Lone Workers 73
1.4.9 Latest Incoming Calls 73
1.4.10 Notifications 74
1.4.11 System Messages 75
1.4.12 Server Tasks 77
1.4.13 Map Tools 77
Points of Interest 77
SmartPTT Basic 9.1 Dispatcher User Guide

Table of Contents
Geofences 78
Routes 79
Subscriber Location Panel 81
1.5 Settings 81
1.5.1 Database 83
1.5.2 Licenses 84
1.5.3 General Settings 86
1.5.4 Subscribers 88
1.5.5 Control Devices 90
1.5.6 Radioservers 92
1.5.7 Operators 95
1.5.8 Statuses 99
1.5.9 Events and Notifications 102
Emergencies 107
1.5.10 Call Windows 108
1.5.11 Sound 109
1.5.12 Records 119
1.5.13 Positioning Systems 121
1.5.14 Telemetry 123
1.5.15 Categories 130
1.5.16 Dispatchers 134
1.5.17 Telephone Subscribers 139
1.5.18 Telephone Interconnect 142
1.5.19 Job Ticket Statuses 160
1.5.20 Third-Party Equipment 162
1.5.21 Hot Keys 164
1.5.22 Database Auto Backup 169
1.5.23 Rules and Alerts 171
1.5.24 Positioning Rules 180
1.5.25 Lone Worker Rules 187

Table of Contents
1.5.26 Subscriber Custom Properties 196

1.5.27 Custom Consoles 200
1.6 Service 212
1.6.1 Radio Check 213
1.6.2 Voice Notifications 214
1.6.3 Deferred Actions 216
1.6.4 Received Files 220
1.6.5 System Information 221
1.6.6 Export Radio Subscribers 222
1.6.7 Import Radio Subscribers 225
1.6.8 Upload to KML 226
1.6.9 Save Dispatcher Settings 228
1.6.10 Restore Dispatcher Settings 229
1.7 Reports 229
1.7.1 Report Wizard 230
1.7.2 Radio Activity 232
1.7.3 Subscriber Locations 235
1.7.4 Online Subscribers 237
1.7.5 Lone Workers 238
1.7.6 Indoor Tracking 239
1.7.7 Radio Subscribers Movement 241
1.8 User Interface Layout 242
1.8.1 Lock UI Layout 243
1.9 Bridging 244
1.10 Conference Calls 252
1.11 Help 256
1.12 Remote Assistance 257

SmartPTT Dispatcher 4
1 SmartPTT Dispatcher
1.1 SmartPTT Dispatcher Interface
SmartPTT Dispatcher interface can be divided into the following sections:
1. Main Menu which also contains Quick Launch Buttons.
2. Main Area
3. Information Bar
Main Menu
The Main Menu bar contains options and commands which allow you to carry out the majority of the functions
available in the application.
Quick Launch Buttons provide you a quick access to some functionality of the application. Currently, there are 3
such buttons.

The Conference Call button opens the Conference Call window where you can hold conference calls.
For more information about this function see Conference Calls.
The Telephone Subscribers button opens the Telephone Subscribers window which allows you to
make calls to telephone subscribers from SmartPTT Dispatcher.
The Dispatchers button opens the Dispatchers window which allows you to make calls to external
dispatchers from SmartPTT Dispatcher.
There are also other menu items represented by an icon:
The Settings button opens the Settings menu which allows you to configure system parameters, create
special rules, which will help you manage workers, connect external third-party devices and so on.
The Help button opens the Help menu where you can read the help file, learn about the application or
check for updates.
The UI Layout Settings button is very useful as it allows the dispatcher to remember the layout of the
Main Area (the position of opened windows and panels). Thus, next time the dispatcher opens the application, he
or she won't need to open the windows all over again. The dispatcher can simply click the this button and select
the layout he or she used earlier. For more information see User Interface Layout.
The Change Operator button allows you to change the operator. At clicking on this button the dispatch
console is restarted, and you can select another operator in the Authorization window.
Main Area
The Main Area is a central area of the application window and is used for opening functional windows and panels
when operating in the application.

Information Bar
The Information Bar was designed to give the user information about the number of unread messages, the
selected subscriber, the owner of the license and the application version. Here you can also see a special icon
which notifies about the approaching license expiration date.
1.1.1 Change Layout
There is an ability to adjust the layout of the opened panels in the Main Area. In order to do that, click on the tab
of the opened panel, drag it to the location where you would like to place it and release. As soon as you start
dragging the panel, new icons appear on the screen. The icons represent a new location of the panel on the
screen.
The table displays description of the icons.
Icon Description
Appears inside a panel, which means that you can either place the panel in
any of the four positions beside the panel or insert it as a tab inside the
panel.

Icon Description
The four standalone icons can be used to place the panel in any position of
the Main area outside any other panel.
1.2 Map
SmartPTT supports different maps, like Google Map, Open Street Map, vector maps of various formats, raster
maps, polish format maps. Together with many useful tools like showing and animating a track, defining points of
interest, maps provide the dispatcher with a better control over radio subscribers. You can open Call Window by
double-clicking on the radio subscriber displayed on the map, or open Action List by clicking with the right mouse
button.
Polish Format Maps

To open a polish format map, expand the Map menu in the Main Menu bar of SmartPTT Dispatcher and click
Map (Polish format). In the opened window select the map file in a MP format.
Google Map
To open the Google Map, expand the Map menu in the Main Menu bar of SmartPTT Dispatcher and click
Google Map.
Raster Map
To open a raster map, expand the Map menu in the Main Menu bar of SmartPTT Dispatcher and click Raster
map > Open map. In the opened window select the file in a MAP format.
To create a map based on a map image, see the Raster Map section.
INGIT Map
To work with INGIT vector maps in SmartPTT Dispatcher, the GWX ActiveX Control application (version 6.1), the
registration key (HASP) and INGIT vector maps are required.
Note: The GWX ActiveX Control software is designed to build INGIT vector maps into independent applications as
a unit, which provides mapping service as a part of these applications. GWX ActiveX Control is purchased once

and then allows you to use various INGIT vector maps. Each map must be purchased separately. See the
purchase conditions on the INGIT company website (http://www.ingit.ru).
GWX ActiveX Control Installation

Follow these steps to install GWX ActiveX Control:
1. Run purchased disk with maps. Insert your HASP into the USB of PC.
2. Click Proceed with the installation of GWX Active-X Control.
3. Select GWX-6.1 ActiveX Control Installation.
4. In the license agreement window, click I Agree.
5. GWX ActiveX Control offers a wizard that will perform the HASP driver upgrade if necessary.
Note: To upgrade the HASP driver manually, download the latest HASP driver installer from the supplier site
and follow the instructions provided.

6. Continue to follow any remaining on-screen instructions to install the software. Select the installation
folder. It is recommended to use the default installation directory, or create a folder at the root of the other
local drive and name it GWX61.
7. Select the check box that is next to the component that you want to add. Make sure the GWX-6.1
ActiveX Control check box is selected.
8. Once the installation is over, run Register GWX ActiveX Control.
When GWX ActiveX Control is installed and the software components are registered, it is possible to work with the
maps, allowed by licenses embedded in HASP. HASP must be plugged into the USB of your PC.
To open an INGIT map, expand the Map menu in the Main Menu bar of SmartPTT Dispatcher and click INGIT
Map. In the opened window select the map file in a CHART format.
Note: If the map failed to load, restart Register GWX ActiveX Control.

MapInfo Map
To set a MapInfo map for SmartPTT Dispatcher, expand the Map menu in the Main Menu bar and click MapInfo
Map > Map Settings. In the Map Settings window click Add and in the opened window select a map layer a
file in a TAB format. You can add multiple TAB-files and determine the drawing order of the layers using the
arrows on the right. To delete a layer, select the TAB-file and click Delete.
Min. Object Size to Show on Map (pixels) minimum size of the object displayed on the map in pixels.
Affects the detail level of the displayed map.
Scale to Draw Layer : 1 : scale factor for a layer. The layer objects will not appear on the map when you are
zoomed in or out beyond the specified scale.
In the Map Description File field specify the path to the map file. Click Save when you are finished. The file will
be saved in a SPMAP format. To open the map right after you saved it, click Save and Open.

To open a MapInfo map, expand the Map menu in the Main Menu bar and click MapInfo Map > Open Map. In
the opened window select the file in a SPMAP or TTKGP format. You can create a map in the TTKGP format
using the TatukGIS Viewer free version (http://www.tatukgis.com/Products/EditorViewer/Editions/Viewer.aspx).
Open Street Map

To open the online Open Street Map, expand the Map menu in the Main Menu bar and click Open Street map
> Open Online Map.
To open the offline Open Street Map, expand the Map menu in the Main Menu bar and click Open Street Map >
Open Map from File. In the opened window select a map file in an OSM or TILESURL format.
To open the Open Street Map from local server, expand the Map menu in the Main Menu bar and click Open
Street Map > Settings. In the Data Source for OpenStreetMap Online field specify the path to the local
server. If you want to get back to the default address, clear Data Source for OpenStreetMap Online and click
OK.
MapPoint Map
To work with MapPoint maps in SmartPTT Dispatcher, you must first install Microsoft MapPoint on this PC.
Europe or North America version depends on required target coverage area.
Note: All versions of Microsoft MapPoint show a simple outline map of the world when zoomed and scrolled
outside of their target coverage area. National borders and a large number of cities are shown outside the target
coverage area. For the target coverage area, road detail and internal subdivisions such as provinces, parishes,
counties, states are shown.
To open a MapPoint map of Europe or North America, expand the Map menu in the Main Menu bar of SmartPTT
Dispatcher and click MapPoint Maps > MapPoint "Europe" or MapPoint "North America".

To open a MapPoint map file created in Microsoft MapPoint earlier, expand the Map menu in the Main Menu bar
of SmartPTT Dispatcher and click MapPoint Maps > Open MapPoint Map File. In the opened window select
the map file in a PTM or PTT format.
How to Use Maps

To move the map press and hold the left mouse button, and move where necessary. Or use arrow keys to move
(this is applicable to the offline map).
To zoom in scroll the mouse wheel forward. To zoom out scroll the mouse wheel back. You can also use the keys
"+" and "-" to zoom in and zoom out.
Majority of maps allow you to display the object address. To do this, right-click at any place on the mapthe
object address will be shown.
Certain types of maps may have the additional functions such as a context menu. Right-click on the map. At that,
the context menu appears.
Using this menu you can:
1. Search on the map
2. Select elements to be labeled on the map.
3. Change the maps appearance.
4. Select the map's rendering type.
5. Display the object address at any place on the map, where the given menu is opened.

1.2.1 Raster Map
To set raster map settings, expand the Map menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Raster Map > New Map. At that, the configuration window is displayed for creating geographic raster maps
based on an image.
To create a map, select the map image using the browse button .
On the selected map image mark reference points (crossroads, places of interest, etc.) with the help of Google
Earth and calculate their coordinates. Coordinates are calculated in the following way:
Longitude and Latitude = Degree + ((Minute * 60) + Second) / 3600 (this s a conversion from degrees, minutes
and seconds into normal values), where X and Y are corresponding coordinates (in pixels) on the image.

The longitude corresponds to the horizontal coordinate (X) and the latitude corresponds to the vertical coordinate
(Y). The longitude value can range from -180 degrees (the most distant longitude to the west from the Greenwich
Meridian set to 0) to +180 degrees (the most distant longitude to the east from the Greenwich Meridian). In fact -
180 degrees and +180 degrees are the same longitude. The latitude value can range from -90 degrees (the South
Pole) to +90 degrees (the North Pole).
Longitude and Latitude coordinates, already converted into normal values and corresponding to the subscriber's
current locations, are also shown in the subscriber's Call Window.
You need four points. Point selection criteria are:
Point 1 is located as close as possible to the top left image corner.
Point 2 is located as close as possible to the top right image corner.
Point 3 is located as close as possible to the bottom left image corner.
Point 4 is located as close as possible to the bottom right image corner.
After all coordinates are entered, click Finish. In the opened window set the raster map name and click Save.
To edit or check object locations in the created raster map, click Open. Locate the raster map in the window
which is displayed.
Note: The created raster map files and the image map file must be in the same folder.
1.2.2 Raster Maps From Database
SmartPTT Dispatcher allows you to work with large raster offline maps with a size of more than 50005000 pixels.
The functionality is used for displaying SmartPTT system objects located at a long distance from each other. This

is achieved by dividing the original raster image into pieces and storing them in the database.
To create the database for the raster map, send your query to our technical support service and attach the raster
map image in a JPEG format with the list of geographical positions on the map (e.g., in a TXT or MAP format).
Geographical positions are necessary to anchor image points to the geographical coordinates. The list of
geographical positions must contain four points at the corners of the map. In response to your request our
technical support specialist will provide you the database backup of the map in a BAK format.
Note: If the attachment(s) size exceeds the limit of 50 MB, split the file to several small files using the archiver or
file manager, or upload it to the file hosting service. In the latter case include a link to the file in your query
message.
Then restore the database from the received backup. For more information see How to restore from SmartPTT
Dispatcher database backup.
After the database is restored, expand the Map menu in the Main Menu bar and click Raster Map From
Database > Settings. Click Scan Databases in the opened window, and you will see a list of all available maps
stored in the databases of the selected server (see Database Settings, the Database Server Name field).

Name name of the map stored in the database. To change the name of the map, double-click on the name in
the Name field and enter a new name.
Database name of the database.
Show if the check box is selected, the map is available in the Map menu. To open the map, expand the Map
menu and select the required map under Raster Maps From Database.
To remove the map from the list, select the map and click Delete. To save your changes, click Save. If you want
to undo the last changes, click Cancel.
1.2.3 Indoor Tracking
Big organizations with huge premises require constant control over their employees' displacement inside
buildings. For this purpose Indoor Tracking system was implemented. Indoor Tracking system allows getting data
from special beacons and transmitting it to SmartPTT Dispatcher or any other client application using API.
Contact our technical support (http://support.smartptt.com/hc/en-us) for SmartPTT Client API documentation.
Currently, SmartPTT system supports the following technologies and products:
iBeacon technology: with the use of MOTOTRBO radios with the firmware version 2.6 and above and the
beacons that support iBeacon technology,
Blufi option boards (RF800) with special beacons (Connect-RTLS RF800), and

Kilchherr option boards (K-TERM 44) with special beacons (K-TERM 70IC Beacon Transmitter).

Note: The Indoor Tracking feature is available only for MOTOTRBO radios with the firmware version 2.6 and above
or for radios with special option boards (see above). Also, it is necessary to configure special settings in
SmartPTT Radioserver Configurator and SmartPTT Dispatcher. The required settings for SmartPTT Radioserver are
described in the Indoor Tracking section of the SmartPTT Radioserver Configurator help file.
To enable Indoor support for a radio subscriber in SmartPTT Dispatcher, open the Properties window of the radio
subscriber and in the Location tab select Indoor Tracking.
Note: If you use Motorola source (iBeacon technology), the Update Interval field must be selected and specified
together with the Indoor Tracking field for enabling Indoor support for a radio subscriber.
To create a building plan, expand the Map menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Indoor Tracking > New. In the Floor Plan window you can create a plan of the building floor or of a multi-
storey building.

Building Name: A name of the building plan.
To add a floor of a building, click the Add button. To remove a floor of a building, select it from the list and click
Delete. To change the floor order inside the building, use the Up and Down buttons.
Floor: A name or an ordinal number of a floor in a building. To change the name of the floor, click the old name in
the Floor field and type a new value.
File Path: A path to the floor plan file. You can use a floor plan in a DWG format or a raster image. To attach a
plan to the floor, click the button and select the required file.
Note: DWG (DraWinG) is a binary file format used for storing two and three dimensional design data and
metadata. It is the native format for several CAD packages including nanoCAD, AutoCAD, IntelliCAD.
Save: You can save the floor or the building plan changes to a SPLANX (archive) format.
To open a building plan, expand the Map menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Indoor Tracking > Open. To control more than one building at the same time in SmartPTT Dispatcher, you
can open several Indoor Tracking panels.
Building Floor Plan
Save: You can save the building plan changes to a SPLANX file.
Save As: You can save a copy of the building plan with another name.

View Mode (2D or 3D): A mapping of the building plan in a two- or three-dimensional form. This feature is
available only for floor plans in a DWG format.
Add Beacon: You can add a beacon to the building plan. For that, in the Beacon Settings window specify the
beacon number and name in the corresponding fields and click OK. At that, the beacon icon appears instead
of the mouse cursor. Place it on the map where the beacon is located and left click. If you use Motorola source,
specify the number of the beacon in the Beacon Number field in the Major.Minor format, where the Major value is
separated from the Minor value by a dot. Major stands for the group number of the beacons and Minor stands for
the individual number of the beacon in the group. If you use the BluFi or Kilchherr source, specify the Beacon IDs
in the Beacon Number field. If the beacon name is not specified in the Beacon Name field, the value from the
Beacon Number field will be shown as a beacon name on the building plan. To remove the beacon from the plan,
double-click on the beacon and in the opened window click Delete.
Geofences: Allows you to unite the existing beacons to control the radio subscriber's moving about the building.
These geofences are used in Indoor positioning rules.
Routes: Allows you to create routes for radio subscribers. These routes are used in Indoor positioning rules.
Edit Plan: Opens the Floor Plan window that allows you to change the floor name, the floor order inside the
building, or the floor plan file.
Grid Size: The grid size of the building plan. For building plans based on raster images, the Grid Size option is
not available.
Label Size: The size of the radio subscriber and beacon labels displayed on the building plan.
Beacons: Select a color for a beacon label.
Radio Subscribers: Select a color for a radio subscriber label.
Subscribers on Indoor Map: A list of radio subscribers who support the Indoor Tracking feature. Select the
check box, to display the radio subscriber's label on the building plan.
Subscribers' tracks: Here you can record tracks of radio subscribers and watch them in real time, or check old
records. To watch the radio subscriber move about the building, click Add Track. In the opened window specify
the following parameters:
Subscriber: The name or radio ID of the radio subscriber.
Source: The radioserver whose data will be used for building a track. If the drop-down list is empty, check
that Event log is created and activated in SmartPTT Radioserver Configurator.
Color: The color of the future subscriber's track.

Start Date: Start time and date of the track record.
End Date: End time and date of the track record. To watch the radio subscriber moving in real time, select
Update in real time.
Show All: Shows tracks of all the radio subscribers from the Subscribers on Indoor Map list. You can see
details of each track. To open Track details, click :
Clear All: Removes all the track records displayed at the moment.
The following buttons allow user to control the way the building plan is displayed:
Button Description
Zooming up the marked area of the building plan. Click the button, then left-click on the
building plan and mark the necessary area.
Zooming up or zooming out the entire building plan. To zoom in, click the button and
withholding the button pressed move the mouse pointer up. To zoom out move the
mouse pointer down. Also, use the wheel button to change the scale of the building
plan.
Moving the building plan. Click the button and withholding the button pressed relocate the
plan.
Fits the scale of the building plan to the size of the Indoor Tracking Overview Map
panel.
Available only for three-dimensional building plans. Allows changing the angle of the displayed
building plan.

1.2.4 Geofences
Geofences help dispatchers to keep an eye on the radio subscribers. A dispatcher can define the area of the
geofence on his or her own and attach Positioning rules to it.
You can add a geofence in two ways:
1. By drawing a geofence on the map. For more information see Geofences.
2. By specifying coordinates of the geofence. You will learn about it in this article.
To add a geofence by specifying its coordinates, expand the Map menu in the Main Menu bar of SmartPTT
Dispatcher and click Geofences. In the opened window you can add a new geofence or modify settings of the
existing one name, color, and whether it should be displayed on the map:
Name the geofence name.
Color the geofence color on the map.
Show enables the option to display the geofence on the map.
Note: Whether the geofence is displayed on the map or not, the rules set for the geofence are enabled. To assign
a rule to the geofence, go to Positioning Rules.

Add the zone-forming points of the new zone. To do that, click Add in the Geofences window. To edit the zone-
forming points, select the zone and click Edit or double-click the required zone in the list.
In the Geofence Coordinates window type the name of a new zone, specify the color of a new zone and a pair of
longitude and latitude values for a zone-forming point. To edit point coordinates, place the cursor into the required
field and type new value. You can't create a zone with less than 3 longitude and latitude pairs. To delete the
points, click Delete.
To delete a geofence from the list, select the geofence and click Delete.
1.2.5 Points of Interest
Points of interest (POI) identify location of special interest which are shown on the map and can be quickly found
in SmartPTT Dispatcher. A point of interest consists of the point name, location coordinates and the picture.

To add a point of interest, expand the Map menu in the Main Menu bar of SmartPTT Dispatcher and click Points
of Interest.
The Points of Interest window allows you to change the name of the existing point of interest and whether it
should be displayed on the map. To modify the existing point of interest, select it and click Edit or double-click
the required point of interest in the list. To delete the point of interest, select it and click Delete.
To add a new point of interest, click Add.

Name name of the point of interest.
Latitude latitude coordinate of the point of interest.
Longitude longitude coordinate of the point of interest.
Picture the image which represents the point of interest on the map. Maximum image size of the point of
interest is 6464 pixels. Images of the bigger size are be automatically cropped to 6464.
Show on Map enables the option to display the point of interest on the map.
You can also create a point of interest from the Tools menu. For more information see Points of Interest panel.
1.2.6 Routes
The route is a polyline connecting key points of the network coverage area. Subscriber location near the key
points is identified by the specified radius of the route and can be summarized in the Subscriber Location Report.
To specify the route parameters (Color, Radius, Coordinates), expand the Map menu in the Main Menu of
SmartPTT Dispatcher and click Routes. In the opened window you can add a new route or modify settings of the
existing one.

Name the route name.
Color the route color on the map.
Radius the allowed deviation from the route.
Show enables the option to display the route on the map.
To add a new route, click Add. To modify route settings, select a route from the list and click Edit or double-click
the required route in the list.
In the Route Coordinates window specify the route name, the route line color, the acceptable deviation from the
route for the radio subscriber, coordinates of the route points and its properties. Key Point is used for singling out
particular places of the track on the map. You can give a name to each key point to be displayed on the map. The
key points are represented by small white squares on the map. Select Show on Map to display the route on the
map.

To delete the route, select it from the list and click Delete.

The route example:
You can also create a route from the Tools menu. For more information see Routes panel.
1.2.7 Show Track
GPS tracking is very helpful for seeing real-time positions of the radio subscribers you are tracking. In addition,
the Show Track feature allows the dispatcher to see where a radio subscriber was during a particular time period.
Note: By default, GPS coordinates are not saved in the database. If you want to save GPS coordinates, open the
Positioning Systems window in the Settings menu and select Save GPS Locations in Database.

To specify draw parameters of the track, expand the Map menu in the Main Menu of SmartPTT Dispatcher and
click Show track. The Show Track window opens.
Subscriber defines subscriber whose track is to be displayed.
Source defines the source, which database will be used for drawing the track. If Dispatcher is selected, the
data is taken from the local database. Apart from Dispatcher, any available radioserver can be chosen as a data
source. In that case all data is taken from the database of the chosen radioserver.
Color the track color on the map.
Line Thickness thickness of the track line on the map.
Start Date, End Date the time frame of the track.
1.2.8 Animate Track
To animate displayed tracks, expand the Map menu in the Main Menu bar of SmartPTT Dispatcher and click
Animate Track.

The Track Animation window opens.
Run track animation
Stop track animation
Pause
Run track animation slower
Run track animation faster
During track animation you can slow it down or make it faster. The system remembers the last track animation
speed and uses it during next track animation.

Here is an image of a sample track on the map.
To clear the tracks shown on the current map, expand the Map menu in the Main Menu of SmartPTT Dispatcher
and click Clear Shown Tracks.
To clear the shown tracks on all maps, expand the Map menu in the Main Menu of SmartPTT Dispatcher and
click Clear Shown Tracks on All Maps.
1.2.9 Coverage Map
Coverage maps give you information about signal strength (RSSI) of a particular radio in a particular place. To build
a coverage map for a radio subscriber, make sure that he has GPS enabled, and there is GPS data in the
database.
Warning! SmartPTT 9.0 supports the Coverage Map function in systems with MOTOTRBO Network
Interface Service 2.60 or earlier. Support for newer MOTOTRBO Network Interface Service versions is
implemented in SmartPTT 9.1.

To build a coverage map, click Map > Coverage map > Show.
All subscribers: Select this option to build a coverage map for all the subscribers on the list.
Select subscribers: Select this option to build a coverage map for the selected subscribers only.
Select categories: Select this option to build a coverage map for all the subscribers of the selected category.
Source: Defines the source, whose database will be used for drawing the track. If Dispatcher is selected, the data
is taken from the local database. If a radioserver is selected, the data is taken from the database of the chosen
radioserver.
Grid: Defines a radius for checking signal strength. The system of units selected in Settings > Positioning
systems > System of Units will be applied to this field.
Start date / End date: Defines over which period the data will be used for the map.

The example of the coverage map:
The Coverage Map Settings window identifies the colors used for different RSSI ranges in the coverage map.
You can adjust the legend on your own, change colors for different RSSI ranges, add and delete RSSI ranges. To
do it, click Map > Coverage map > RSSI ranges.

To clean the map, select Map > Coverage map > Hide.
1.3 Event Log

The Event Log allows you to see what is going on in the system. The event log displays status and event
messages from SmartPTT system, and other useful information.
To open the event log, click Event Log in the Main Menu bar and then All Events. To tune Event Log settings,
see Event Log.
You can limit the number of displayed data by setting a period of time. To do this, click Events for Period in the
Events menu. The Period dialog is displayed. Specify start and end date for entries displayed in the log.

To display only not read messages in the log, select Unread Messages.
The system event log appears as follows.
Alerts and event initiated in the emergency mode colored red in Event Log.
The event log of SmartPTT Dispatcher contains the following columns:

By default, all the columns are displayed in the log. To hide or show columns in the log, right-click on the menu
with column names and select the necessary columns.
Column Name Description

Shows whether the event is incoming or outgoing. You can tell the direction by the
Direction arrows: the green one stands for the incoming event, and the blue onefor the outgoing
event.
Shows the type of the event. It can be a call, registration, a block command, a
Event Type message, change of a status, an alarm, a telemetry command, a job ticket, enabling or
disabling the lone worker mode and other.
Date/Time Shows the date and time of the event.
Not Read Shows if the message was read or not.
Additional Additional information includes: text messages, titles and description of tasks, initiators
Information and contributors of group calls, and other.
Operator
This column exists in

Shows the operator of the dispatch console who participated in the event.
the event log of the
dispatch console only.
Radioserver Shows the name of the radioserver used in the event.
Dispatcher

Shows the operator of the dispatch console who participated in the event.
radioserver only.
Channel Shows the channel on which the event was registered.
Shows the subscriber who can be a source or target in the event. Here you can also
Subscriber
see all the subscribers who talked in a group call.
Source Shows the event initiator name or ID
Talkgroup Shows the talkgroup which participated in the event.
Status Shows the status of the event ("Message delivered", "Power down", etc.)
Duration Shows how long the event lasted in seconds.
Connection Type Shows the connection type of the event. It can be IP, PBX and DMR.

Column Name Description

Repeater IP

Shows the IP address and port of the repeater which was used.
Destination Shows the radio ID or name of the target radio subscriber or talkgroup.
Record Shows if you can play the record or not.
Lone Worker Shows if the lone worker profile is assigned to a radio subscriber.
Note Contains the text which the dispatcher added to a record.
You can filter the event log by any of these columns. You can also filter the event log by the Not Read column by
clicking There are unread messages: in the Information bar.

Click any column name, so the log sorts its contents according to this column content. You can filter the content
displayed in the log using filters.

To group the log entries, click the column title and drag it to the area labeled as "Move column header here for
grouping".
If you want to have particular columns to be always seen in the log regardless of the scroll position, use the
special element in the column titles. Just drag it after the column you want to be always there.
To listen to audio records of the calls, select the call in the event log and click the Play Selected Records button
Note: To enable recording of calls, go to Settings and select Records. There select Record Calls.

The Play Records window for selected records opens.
After the record playback window opens, selected records are reproduced automatically, starting from the earliest
date.

Player buttons:
Start Playback plays the selected record and all the records of the list without stopping.
Pause Playback pauses playback of the current record. Clicking the Start Playback button resumes
playback of the record from the place of suspension.
Stop Playback stops playback of the current record. Clicking the Start Playback button enables playback
of the record from the beginning.
Return to Previous Record plays the previous record after the current one.
Go to Next Record plays the following record after the current one.
Settings:
Play All Records enables the mode of all records reproduction in turn. Playback is controlled by the
previously described buttons.
Replay enables the mode of replaying the current record or all the records in turn if the Play All Records
mode is activated.
Button opens a subscriber call window. Button opens a window for message sending.
Opening Radioserver Event Log

Depending on SmartPTT system configuration the event log can be saved either on the dispatcher side or the
server side, or both.

To open the event log saved at the radioserver:
1. Open the radioserver Action List and select Show Radioserver Event Log.
2. Select the Start and End Dates to show events of the period. The Radioserver Event Log is displayed
in the same way as the Dispatcher Event Log in a separate tab.
To make subscriber radio activity report based on the radioserver data, in the Main Menu select Reports >
Radio Activity Report. In the opened window specify the period of time, source, channel, grouping and click OK.
1.4 Tools
From the Tools menu you can open all the panels used in SmartPTT Dispatcher.
These are the following panels:
Calls panel displays the ongoing call activity and call history in the radio network.
Sound panel allows you to monitor and adjust the signal volume.
Cross Patches panel allows you to connect talkgroups from different frequency bands or from different
network types dynamically.
Radio Fleet panel displays a list of radio subscribers registered in the system.
Subscribers panel for quick access to the subscribers.
Job Tickets panel from where you can create and supervise job tickets.
Lone Workers panel to show lone workers' status, for example, that a lone worker did not call for a longer
period than expected, etc.
Latest Incoming Calls panel, which gives you information of the recent voice calls made.
Notifications panel to get information about the alarms configured by the dispatcher.
System Messages panel, which displays errors, disconnection of the radioserver, etc.
Server Tasks panel to display server tasks in the background

Map Tools contains all the available map tools of the dispatch console: Points of Interest, Routes,
Geofences, Subscriber Location panels.
Custom onsole panel created by the SmartPTT Dispatcher to manage subscribers, talkgroups or control
stations.
1.4.1 Calls
The Calls panel displays the ongoing call activity and call history in the radio network.
The first time you install SmartPTT, the Calls panel opens automatically. The panel can also be opened or closed
manually. To do this, expand the Tools menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Calls.

A call record in the Calls section contains several elements.
From the Calls panel the dispatcher can do the following:
Answer the ongoing call by clicking anywhere on the call record.
See the ongoing call activity. The call status can be determined by the color of the call record.
See history of all registered calls, time of call and its duration.
Make all types of call by clicking the button with the subscriber name.
Call status is determined by the color of the call record:
1. Light yellow outgoing call attempt, or a call in the queue (in conventional systems).
2. Yellow all outgoing radio calls.
3. Green all incoming radio calls or radio monitoring.
4. Blue none of the parties transmit or receive voice (hang time). The subscriber or the dispatcher can
continue the call by pressing the PTT button within hang time. After the hang time expires, pressing the
PTT button will initiate a new call.
If the Calls section is empty, to make a call to a radio subscriber, select the subscriber under Radio Fleet and
click the PTT button. The corresponding call record will appear in the Calls section and the call will be initiated.
1.4.2 Sound
The Sound panel allows you to monitor and adjust the signal volume.

To open Sound panel, expand the Tools menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Sound.
The button allows you to adjust the speaker volume.
Selected objects: allows you to adjust the volume for selected objects.
Unselected objects: allows you to adjust the volume for unselected objects.
System sounds: allows you to adjust the volume for system sounds.
The button allows you to adjust the microphone volume.
1.4.3 Cross Patches
Cross Patches allow you to connect talkgroups from different frequency bands or from different network types very
quickly. A call made to a cross patch will be heard by all participants of this cross patch. Also, a call made to a
talkgroup included in the cross patch will be heard by all participants of this cross patch (this is true even for a call
made by the dispatcher).
A cross patch is created in the dispatch console and controlled by the dispatcher. When the dispatch console
gets closed, all the cross patches created in this dispatch console will be saved.
To create a cross patch, do the following:
1. Open the Cross Patches panel from the Tools menu (if it's not open).
2. Add a cross patch. To do this, in the Cross Patch panel click on the Add Cross Patch button:

3. In the new Cross Patch window select objects of the future cross patch. To add the selected object to the
cross patch or to remove it from the cross patch, click the corresponding arrows or double-click on the
mouse button. Then click Enable.

The new cross patch will appear in the Cross Patches panel.
In the Cross Patches panel you can do the following:
Filter the list of cross patches to see active cross patches or all cross patches (the Active and All options).
Make a call to all the parties of the cross patch by clicking on the PTT button.

Perform actions from the Action List of the cross patch: enable or disable the cross patch, edit its properties,
mute or unmute it, and delete it from the list. To open the Action List, click :
Enable / Disable turns on/off the cross patch.
Mute / Unmute turns on/off the sound for all parties of the cross patch. If the cross patch is muted, the
dispatcher won't hear any party, but all the cross patch participants will hear the dispatcher. If the cross
patch is unmuted, but one of the participant talkgroups is muted, the dispatcher will hear all the others, but
not this talkgroup.
Note: If the cross patch contains groups from network topologies based on control stations and direct connection,
and you can hear hoarse voice, select DMR Vocoder as a codec in the sound settings in the dispatch console
(Settings > Sound) and in the audio settings of the control station (SmartPTT Radioserver Configurator > Control
stations > Audio):
1.4.4 Radio Fleet
The Radio Fleet panel displays a list of radio subscribers registered in the system.
The first time you install SmartPTT the Radio Fleet panel opens automatically. To open or close the Radio Fleet
panel manually, expand the Tools menu in the Main Menu bar of the SmartPTT Dispatcher window and click
Radio Fleet.

The radio subscriber list consists of the following columns object, status and the PTT button. The Object field
shows the name of the subscriber or radioserver. The Status field displays the current status of the radio
subscriber. The PTT button initiates a call.
To edit the list of subscribers, use the buttons. You can show or hide
talkgroups, show or hide online or offline radio subscribers. Also, you can
filter radio subscribers by the categories. To do that, click Filter by category . To filter radio subscribers
by the channels, click Filter by channel .

The entry field under the buttons allows you to search a radio subscriber by
name or ID.
To filter the radio subscribers by a status, select the required status form the list.
The and allows the dispatcher to add a new radio subscriber or delete the existing subscriber.
Radio subscribers not added in SmartPTT Dispatcher are considered unregistered and displayed in italic in the
Radio Fleet panel. Unregistered subscribers are displayed in the list of subscribers after a radio is turned on and
registration on the radioserver is successfully completed.

GPS coordinates of a radio subscriber are outdated or missing.
GPS coordinates of a radio subscriber are valid. Validity period of GPS coordinates is defined by the
Validity of GPS coordinates parameter in Settings > Positioning Systems.
Note: The icons and are displayed if GPS support is enabled in the Properties window of a radio
subscriber and at least one location update criterion is selected.
Action List
The button opens the Action List including a list of actions which can be applied to a radio subscriber, the
radioserver, a control station or a talkgroup.

The Action List of the radioserver
Show Radioserver Event Log displays the radioserver event log for the specified period of time. For more
information on the event log see Radioserver Event Log.
Configure Call Bridging Table redirects to the routing configuration window.
Main Device shows what audio output device is currently used for the radioserver. You can also change to
another device.
View Properties opens the radioservers's Properties window.
The Action List of a hardware control station

Exit Emergency Mode disables emergency mode.
Note: The Exit Emergency Mode action becomes available after a radio subscriber sends the emergency signal.
Radio Dekey forced interruption of calls on the channel. This option is available only for hardware control
stations and in IP Site Connect network.
Reset Control Station resets the control station. Only hardware control stations can be reset.
Mute or Unmute turns off/on the control station mute mode.
Mute Others leaves sound on only for this control station; other control stations are muted.
Main Device shows what audio output device is currently used for the control station.To change to another
device, select a specific output device or Inherited device, i.e., the device selected for the higher level, in this
case, for the radioserver.
View Properties opens the control stations's Properties window.
The Action List of a virtual control station

Radio Dekey forced interruption of calls on the channel. This option is available only for hardware control
stations and in IP Site Connect network.
Reset Control Station resets the control station. Only hardware control stations can be reset.
Mute or Unmute turns off/on the control station mute mode.
Mute Others leaves sound on only for this control station; other control stations are muted.
Main Device shows what audio output device is currently used for the control station.To change to another,
select a specific output device.
View Properties opens a window there you can specify some information.

The Action List of a talkgroup
Exit Emergency Mode disables emergency mode. The Exit Emergency Mode action becomes available only
after a radio subscriber has sent the emergency signal.
Send Message opens a window for creating and sending messages.
Make Conference Call opens the Conference Call window and starts the conference call.
Call Telephone Subscriber opens the window with the list of registered telephone subscribers.
Mute / Unmute turns on/off mute mode for this group.
Main Device shows what audio output device is currently used for the talkgroup. To change to another device,
select a specific output device.
The Call Window of a talkgroup contains some of the actions available to the talkgroup. The main function of the
Call Window is to give the ability to apply actions to the talkgroup and to view the action log. To open the
window, double-click on the talkgroup.
View Properties opens the Properties window of the talkgroup.
The Action List of a radio subscriber


Exit Emergency Mode disables emergency mode. The Exit Emergency Mode action becomes available after
a radio subscriber sends the emergency signal.
Send Message opens a window for creating and sending messages.
Send Call Alert sends a call alert to the subscriber.
Radio Check sends the radio check command to the subscriber radio.
Monitoring allows you to listen to the radio subscribers without their awareness.
Set Location allows you to define location of a radio unit on the map manually, without GPS data. If GPS
support is enabled in the radio subscriber's Properties window (in the Location tab), the location set manually
has a validity period which is defined in the Positioning Systems settings in the Validity of GPS coordinates
field. If GPS support is not enabled in the radio subscriber's Properties window, the location set manually is
always valid.
Find on Map shows the subscriber on the map. If there are more than one subscriber on the same position on
the map, the subscriber's label will placed above all other labels.
Show Address displays the subscriber address based on the current GPS coordinates. If it is impossible to
define the address, the notification No Coordinates appears. When you reopen Call Window (after it was
closed), previously received information on the address is not displayed.

Remove from Map removes the subscriber from the map.
Find on Indoor Map shows the subscriber on the building map. The Find on Indoor Map action is available
for a radio subscriber if the Indoor Tracking check box is selected in the Properties window of the radio
subscriber.
Block Radio sends the Block Radio command to the subscriber radio.
Unblock Radio sends the Unblock Radio command to the subscriber radio.
Make Conference Call opens the Conference Call window and starts the conference call.
Call Telephone Subscriber opens the window with the list of registered telephone subscribers.
Create Point of Interest creates POI at the current place of the subscriber. If there are no coordinates, the
system uses the latest coordinates received from the radio. If coordinates are absent altogether, nothing happens.
Create Deferred Action opens a window for creation of a deferred action.
Main Device shows what audio output device is currently used for this radio subscriber. To change to another
device, select a specific output device.
View Properties opens the subscriber's Properties window.
Call Window
The Call Window of a radio subscriber contains some of actions available for the radio subscriber. The main
function of the Call Window is to give the ability to apply actions to the subscriber and to view the action log. To
open the window, double-click on the radio subscriber. To customize the appearance and behavior of the Call
Window, to the Call Window settings.

Making a call
The PTT button is located in several places: in the Radio Fleet panel and in the Call Window. Depending on the
call status, the PTT button can be displayed in the following colors:
1. Light yellow outgoing call attempt, or a call in the queue (in conventional systems).
2. Yellow all outgoing radio calls.
4. Green all incoming radio calls or radio monitoring.
5. Blue none of the parties transmit or receive voice (hang time). The subscriber or the dispatcher
can continue the call by pressing the PTT button within hang time. After the hang time expires, pressing
the PTT button will initiate a new call.
To call a radio subscriber in any system,:
1. Select the subscriber from the Online Subscribers list
2. Click PTT next to the subscriber name or press the specified keyboard hot key. At that, the PTT button
changes its color to light yellow, and then to yellow. The caller subscriber will hear your voice.

3. Click PTT again to give the subscriber an opportunity to respond. At that, the color of the PTT button
changes to blue.
4. When the subscriber starts to respond, the color of the PTT button changes to green.
Sending messages
To send a message to a subscriber, click in the Call window of the radio subscriber or click Send
Message in the Action List.

Save Template saves the typed message as a template.
Delete Template deletes a template selected in the list of templates.
Send sends the typed message to the subscriber
Cancel the Text Message window closes and the message is not sent.
You can also send a message using the Type text and press Enter field.
How to change subscriber name using radio

A subscriber can easily change his or her name by using the radio. At that, the new name will appear in the
Subscriber panel.

To do it, you need to send the text message profile%name:<new name> to the Slot ID set in your system.
Before sending:
After sending the message:

The Properties Window

To open the Properties window of the radioserver, control station, talkgroup, radio subscriber, dispatcher or
telephone subscriber, right-click on the corresponding item.
The Properties window of the radioserver
Server Version the version of the radioserver. If the version of SmartPTT Radioserver does not match the
version of SmartPTT Dispatcher, the version number is displayed in red.
Comments text field for additional information.
The Properties window of the hardware control station

The window displays information on the control station, for example, model number, serial number, control station
type, frequency range, firmware version, control station identifier.
You can change the channel of the control station by selecting it from the list or clicking arrow buttons.
The Volume slider allows you to set a volume on the channel. This option also effect on the emergency alert and
subscriber voice at the emergency call.
The Properties window of the virtual control station
The window displays an information about the control station, for example, serial number, firmware version, control
station identifier, type of network configuration.
The Volume slider allows you to set a volume on the channel. It also regulates the volume of the emergency alert.
Note: The adjusted volume level of the selected channel affects the volume of all incoming voice calls (including
emergency calls) on all the audio devices of the given channel.
The Properties window of the talkgroup

Comments text field for additional information.
Click the Telemetry button to select telemetry command for the talkgroup.
The Properties window of the subscriber
The Common tab:
IP IP address of the radio subscriber to identify the subscriber radio. If the IP field is absent, specify CAI and
Radio ID.
MDC ID the identifier used to identify Motorola Data Communication (MDC) messages. You cannot type more
than 4 hexadecimal numbers into this field. It is used in the analog and the mixed modes.
5 Tone ID the radio subscriber identifier. If the radio works on the analog channel and supports the 5 Tone
signaling (SelectV). It must match the 5 Tone Radio ID in the General Settings tab of the radio MOTOTRBO
CPS settings. To be set in the range from 0 to 9 or from A to G.
Note: Several IDs can be used as the radio identifier. If the radio is used on the analog channel only, just 5 Tone
ID or MDC ID must be filled, and the CAI and Radio ID or IP fields must be empty.
Name the subscribers name.
Status the subscribers status.
Select click to upload the radio subscriber's image if there is any. To delete the selected image of the user,
click the cross symbol on the left to Select.
click the button to select the icon of the subscriber.

click the Telemetry button to specify telemetry actions to the radio subscriber.
Lone Worker select the check box to assign the Lone Worker Profile to a radio subscriber. Select from the
list the profile of the lone worker.
Note: You can add lone worker profiles in SmartPTT Dispatcher in the Settings menu under Lone Worker Rules.
The Location tab:
GPS select the check box to see the subscriber on the map. The subscriber radio must support GPS.
Note: To set up GPS for the SmartPTT Radioserver, specify the required settings described in the GPS section of
the SmartPTT Radioserver Configurator help file.
The Update location area allows you to specify the location update criteria:
with time interval, s the time interval in seconds after which the GPS coordinate request will be sent to the
radio subscriber.
Note: You can set the main time interval for receiving GPS coordinates in the subscriber Properties window. The
minimum interval for receiving GPS coordinates is set in SmartPTT Radioserver Configurator (Radio Network
Services > GPS > Minimum location update interval). Therefore, if the interval set in the Properties window
is less than that set in SmartPTT Radioserver Configurator, GPS coordinates will be received at the interval set in
SmartPTT Radioserver Configurator.
with distance interval, m the distance interval in meters or feet after which the GPS coordinate request will be
sent to the radio subscriber.
on GPIO pin status change the GPS coordinate request will be sent to the radio subscriber when the status of
telemetry contacts changed.
on emergency the GPS coordinate request will be sent to the radio subscriber when the radio subscriber
sends an emergency alarm.

Indoor Tracking select the check box to see the subscriber on the building plan by the dispatcher request (the
Find on Indoor Map action) or after the predefined time period (the Update Interval, s field in the Location tab
of the radio subscriber Properties window). The subscriber radio must support Indoor Tracking. If you use
Motorola source (iBeacon technology), the Update Interval field must be selected and specified together with the
Indoor Tracking field for enabling Indoor support for a radio subscriber
Note: To set up Indoor Tracking for SmartPTT Radioserver, specify the required settings described in the Indoor
Tracking section of the SmartPTT Radioserver Configurator help file.
Update Interval, s the time interval in seconds for location data update from special beacons, which are
installed in buildings. The field is mandatory in case of Motorola source (iBeacon technology) use.
The Custom tab contains subscriber's custom properties, which were added by the system administrator. If there
are no any added custom properties, the Custom tab is absent.
1.4.5 Channels
The Channels panel allows you to see all the active control stations available in the system.
You can do the following in this panel:
Make an All Call or a group call depending on the selected type of call.
Mute or unmute the channel. If the channel is muted, the dispatcher won't hear the talkers on the channel.
View information about the current call on the channel: the call state, the called party and the call originator.

Perform other actions from Action List. The actions in Action List may be different. This depends on
whether the channel is physical or virtual. For more information on Action List of control stations see Radio
Fleet in the Help file of SmartPTT Dispatcher.
1.4.6 Subscribers
The Subscribers panel provides convenient interface to perform voice calls, to edit properties of radio subscriber
and to filter the list of radio subscribers by generating a list of control buttons for radio subscribers.
To open the Subscribers panel, click Main Menu > Tools > Subscribers.
You can perform the following actions on the Subscribers panel:
filter the list of radio subscribers by various criteria,
customize the list of radio subscribers,
call to a radio subscriber,
find the necessary radio subscriber in the filtered list by its name or radio ID, using the Search field.
open the radio subscriber Call Window, by right clicking the corresponding control button on the panel, and
open the radio subscriber Actions List, by clicking the button .
The Subscribers panel contains the following filter criteria:
All subscribers: All registered radio subscribers (online and offline).

Online: Online radio subscribers only.
Manual selection: Customized list of radio subscribers.
Categories: Radio subscribers of the specific category, predetermined in the Categories window. If there are no
any added categories, this filter is absent.
The All subscribers, Online, Manual selection, Categories filter criteria show in brackets the number of radio
subscribers in the list, filtered by one of these criteria.
Statuses: Radio subscribers with the selected status. The statuses are predetermined in the Statuses window. If
there are not any added statuses, this filter is absent.
Note: The Statuses criteria is applied to the list of radio subscribers already filtered by one of the following
criteria: All subscribers, Online, Manual selection, or Categories.
To customize the list of radio subscribers, select the Manual selection radio button and drag the necessary
radio subscribers to the panel from the Radio Fleet panel. To delete the radio subscribers from the customized
list, select the radio subscriber and press the Delete button.
To make a call to a radio subscriber, click the radio subscriber button, or select the radio subscriber and press
the PTT button. The PTT settings defined in Control Devices are applied to this panel.
You can distinguish between radio subscribers states on the panel. Different states differ by color of the control
button and the frame around it. The colors are the same as in Custom Consoles.
: the icon on the subscriber button shows that the dispatcher did not answer the radio subscriber call. The
figure next to it shows the number of missed calls.
1.4.7 Job Tickets
The Job Tickets panel allows creating special assignments for radio subscribers or talkgroups and tracking their
performance.
Note: This functionality is supported only by MOTOTRBO SL Series portable radios. When a job ticket is sent to
the radio, which does not support this functionality, it comes as a message, for example, <JTS> Job Ticket ? 1
Create weekly report.
To create a job ticket, expand the Tools menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Job Tickets.

The Job Tickets panel can be divided into three parts:
Filters
Job Ticket List
Status Change Log
The filters arrange the list of job tickets to the operator's taste.
You can hide job tickets from the job list after the particular status is achieved. To do that, deselect the Show
complete job tickets check box.

To create a job ticket, click Add.
Name job ticket name. It is a required field.
Description description of the job ticket. Also required field.
Validity period defines the time period during which a job ticket can be assigned to offline radio subscribers.
After this validity period expires, the job ticket is never sent. If a job ticket is not completed before the validity
period has expired, the job ticket gets the status "Outdated".
Assigned job tickets can be assigned to an individual radio subscriber or to a talkgroup. To do this, simply drag
a subscriber or a talkgroup in this field. To remove the assigned subscribers, select the subscribers from the list
and press DELETE.
After creation, the job ticket will be displayed in the job list with the default status value. When the radio
subscriber changes the job ticket status, the status in the job list will be changed accordingly. If the job ticket is
assigned to a talkgroup, the job ticket table will contain the name of the radio subscriber, who changed the job
ticket status. Job tickets can be assigned to offline subscribers too. As soon as offline subscribers become
online, they get the job tickets (if the validity period has not expired).
To see the history of changes for job ticket statuses, click on the job ticket status. At that, the Status Change
Log table will display the information about status updates.

To cancel the job ticket and delete it from the job list, click Delete. At that, the radio subscriber, to whom the job
ticket was assigned, will receive a text message that the job ticket was canceled (only if Send notification to
subscriber when uncompleted job ticket was deleted by dispatcher is checked in Job Ticket Statuses).
If the job ticket has not been delivered (see Status Delivery) for some reason, or if you want to resend the
existing job ticket to a radio subscriber or a talkgroup, click Resend. In this case, the edit window will open, and
after clicking OK, a job ticket with a unique number will be sent. Use of unique numbers is important for job ticket
resending, because radios ignore job tickets with same titles. Therefore, before resending a job ticket, make sure
automatic numbering is enabled (Settings > Job Ticket Statuses).

To get information about job ticket statuses for a period, when the dispatch console was turned off, click Get
Update Status.
1.4.8 Lone Workers
The Lone Workers panel displays the list of subscribers who are in the Lone Worker mode and their current
status. This was designed for a better supervision over lone workers.
To open the Lone Workers panel, expand the Tools menu in the Main Menu bar of the SmartPTT Dispatcher
window and click Lone Workers. At that, the following window opens.
The Lone Workers panel shows radio subscribers working in the Lone Worker mode marked with specific color.
The color shows if the subscriber meets the requirements set for the lone worker profile the subscriber belongs to:
Light gray the lone worker did not violate the rule.
Yellow rule violation: the event, described by the rule, has occurred. Alert Timer starts.
Red the lone worker did not react in a specified way after Alert Timer expired.
Note: For more information how to set rules for lone workers, please see Lone Worker Rules.
To turn off the Lone Worker mode, click the cross button.
1.4.9 Latest Incoming Calls
The Latest Incoming Calls panel shows the latest subscribers who made a call in the radio network. It also
provides quick access to the call window of the subscribers.

To open the panel, on the Tools menu click Latest Incoming Calls.
To call a subscriber, click it in the panel. This opens the Call Window of the subscriber.
To change the number of subscribers in the panel, change the Notification Panels settings.
1.4.10 Notifications
The Notification window informs the dispatcher that the set of rules were not fulfilled and the alarms were
activated.
The following rules are displayed in the Notifications window:
Rules and Alerts
GPS Rules
Lone Worker Rules

When the specified event happens and one of the rules triggers, the notification window opens up automatically to
display the alarm notification.
The usual notification is composed of the following parts:
Caption
Subscriber name and time
Text of the alarm

1.4.11 System Messages
The System Messages panel shows you messages on events related to the radio network functionality.
Messages inform you about:
the statuses of the connections to the radio networks,
the statuses of the connections to the radio network components,
the statuses of the connection to the server and more.
You can see three types of messages:
error messages for losing a great functionality, for example:
warning messages for losing a minor functionality, for example:
information messages about getting or restoring functionality.
You can configure rules for message appearance in the Events and Notifications menu.
You can learn a source of the event from the message:
Client, i.e. the SmartPTT Dispatcher program,
Server, i.e. the SmartPTT Radioserver program,
Client-Server Connection,
Database, i.e. the SmartPTT Dispatcher database,
Your radio network and its components.
You can also see a time of the event and commentary on it.
You can show the System Messages panel in two ways:

On the Tools menu, click System Messages. The System Messages window appears.
by configuring its automatic showing in the System Messages menu.
To close the System Messages panel click Close .
Examples of warning messages:
This message appears when amount of records in the database exceeds 90% of the maximum size of the
database. It will appear at the start of SmartPTT Dispatcher and will reappear every 30 min until database is
not cleaned up.
In rare cases you can see a message that database in 100% full. It appears only when 0.005% of free space
left in the database.
Examples of error messages:
This message indicates that amount of records in the database reached its maximum. It will appear at the start
of SmartPTT Dispatcher and will reappear every 30 min until database is not cleaned up.

1.4.12 Server Tasks
The Server Tasks window shows the list of commands from the dispatch application the radioserver is processing
at a given moment of time.
For now, only a few commands are displayed in the Server Tasks window, for example, the command to create
the radioserver event log.
1.4.13 Map Tools
Points of Interest
The Points of Interest panel displays all the existing points of interest. You can also create, modify or delete a
point of interest from the panel.
To view points of interest (POI) to be displayed on the map, expand the Tools menu in the Main Menu bar of the
SmartPTT Dispatcher window, click Map Tools and then Points of Interest.
At that, the Points of Interest panel opens.
In the panel window you can do the following:
Create a new POI
View the list of created POIs
Hide or show POIs on the map

To create a new POI:
1. Open a map.
2. Click Create.
3. In the opened window type the name of the POI and upload its picture. Click OK.
4. Place the new POI on the map by clicking the left mouse button.
5. To save the position of the POI click Save in the panel window. To call off the changes, click Cancel.
You can also create the POI from the Map menu. For more information see Maps.
To hide or show the POI on the map, select the check box next to the POI title.
Geofences
The Geofences panel is used to create, modify and display geofence on the map. Geofences help dispatchers
keep an eye on subscribers. A dispatcher can define the area of the geofence on his or her own and attach
special rules to it.
You can add a geofence in two ways:
1. By drawing a geofence on the map. You will learn about it in this article.
2. By specifying coordinates of the geofence. For more information see Geofences.
To open the Geofences panel, expand the Tools menu in the Main Menu bar of the SmartPTT Dispatcher
window, click Map Tools and then Geofences. At that, the following window opens up.
To create a new geofence:

1. Open a map.

Note: Geofence creation with Map Point is not supported.
2. Click Create in the Geofences panel window.
3. In the opened dialog box type the name of the geofence and select the color. Click Create.
4. Draw the geofence on the map with the help of mouse and the keyboard. The geofence must have at least 3
points. To undo the last added point press the ESC key. You can also stop drawing the geofence by double-
clicking on the last point of the zone.
5. Click Save in the Geofences panel window.
6. The record about the new geofence will appear in the Geofences panel.
7. You can activate the geofence in this panel by selecting the check box next to the name of the geofence and
edit it by clicking Edit. You can also change the color of the geofence.
To call off creation of the new geofence, click Cancel. To modify the existing geofence, click Edit.
To assign a rule to the geofence, go to GPS Rules.
Routes
Route is a tool of SmartPTT that significantly extends functionality of the dispatch system, especially for
monitoring and controlling networks of highly mobile subscribers moving along the predefined route (for example,
employees of transportation companies). Its meaning radically differs from the pre-existing concept of a "Route"
as the trajectory of subscribers movement that, from now on, is called "Track".
The route, starting with version 7.1.0 is a polyline connecting key points of the network coverage area. Subscriber
location near the key points is identified by the specified radius of the route and can be summarized in the
Subscriber Locations report.

To open the Routes panel, expand the Tools menu in the Main Menu bar of the SmartPTT Dispatcher window,
click Map Tools and then Routes. At that, the Routes panel opens.
To create a new route:
1. Open the map window and click Create. At that, the New Route window opens.
2. In the field Name type the name of the new route.
3. Set the color of the new route.
4. In the Radius field enter allowed deviation from the route.
5. Click Create.
6. Go to the map window and draw the route.

Route points are created by clicking with the left mouse button on the map area. To create the first route
point, point to the place where the route starts and left-click on it. To create next route points, point to the
appropriate place on the map and left-click on it. Route points connect sequentially drawing a new route on
the map. To undo the last added point, press Esc.

You can stop drawing the route by double-clicking the last point of the route.
7. To save the route, click Save in the Routes panel window. To call off the route, click Cancel. To modify
the existing route, click the Edit button .
Subscriber Location Panel
Subscriber Location panel shows the subscribers inside the selected area on the map.
To select area on the map, press CTRL and click with the left mouse button and draw the area covering
subscribers.
Note: The Subscriber Location panel will be opened automatically if it is hidden at the moment of subscriber
selection.
Opened Subscriber Locations panel.
Click to find the subscriber on the map.
To open the Subscriber Location panel manually, click the Tools menu in the Main Menu bar and then open
Map Tools.
1.5 Settings
The Settings menu allows you to configure system parameters, create special rules, which will help you manage
workers, connect external third-party devices and so on:
Database allows you to manage the system database, i.e., create new database or connect to the existing
database.
Licenses allows you to install licenses.
General Settings allows you to tune the dispatch console, e.g., define the PTT button behavior, enable
automatic system updates, select language, etc.
Subscribers allows you to add, edit and delete radio subscribers.

Control Devices allows you to select and configure control devices to be used in SmartPTT Dispatcher, like
the mouse, touchscreen and other devices.
Radioservers allows you to manage available radioservers, e.g., add new radioservers to be seen in the
dispatcher console, assign profiles to the available radioservers.
Operators allows you to add operators and manage their rights.
Statuses allows you to add statuses for radio subscribers displayed in the Subscribers Management
panel.
Event Log allows you to manage the event log and the system messages.
Call Windows allows you to configure Call Window parameters, e.g., specify the type of event that triggers
the window opening.
Sound Settings allows you to configure sound settings and set up multichannel sound.
Records allows you to enable call recording and set up recording parameters.
Positioning Systems allows you to configure GPS and Indoor settings.
Telemetry allows you to configure telemetry commands to be available.
Categories allows you to create categories.
Dispatchers allows you to add other dispatchers and configure parameters of your own dispatcher console.
Telephone Interconnect allows you to configure telephone settings and Telephone Subscribers allows you
to create a list of telephone subscribers.
Job Ticket Statuses allows you to add statuses for job tickets.
Third-Party Equipment allows you to configure Tipro settings.
Hot Keys allows you to customize keyboard shortcuts for making calls to subscribers.
Database Auto Backup allows you to set the SmartPTT Dispatcher database auto backup.
Rules and Alerts allows you to set up rules based on general events.
Positioning Rules allows you to set up rules based on GPS and Indoor data.
Lone Worker Rules allows you to create and set up rules for lone workers.
Subscriber Custom Properties allows you to add additional properties to be displayed in subscriber
Properties window.
Custom Consoles allows you to create custom consoles with necessary elements.

1.5.1 Database
To connect to the database, expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher
window and click Database. At that, a configuration window for database creation opens.
Before creating a new database, connect to the database server. For this, fill in the Database server name field,
and click Connect. In case of a successful connection, you will see the following message in the Database
section: "Connection is established successfully!". If connection was not established, you will see a message
with the error description at the bottom of the window.

Note: For the database server installed together with the SmartPTT Dispatcher application enter the name using
the format: Name of PC\SQLExpress (for example, MYCOMP\SQLExpress).
Authorization Mode allows you to select authorization mode with the database.
SQL Server Authorization you must have the login and password of the account which has access to the
SQL server.
Windows NT Authorization the user who has logged into the Windows system, must be listed in the SQL
servers list of users to make connection.
To create a new database, click Create Database. In the window that opened enter the name of the new
database and click Save.
Current database allows you to connect to one of the created databases.
Restore Database allows you to restore the current database using automatic backups. You can set up auto
backups of the database in Settings > Database Auto Backup.
To save the changes, click Finish. To apply the changes with the database, restart the dispatch console.
1.5.2 Licenses
To use the SmartPTT application you need to install licenses. There are licenses for basic features which allow
you to run the application and licenses for additional features, like telephone connection support, bridging, SNMP
service, etc.

To install licenses, expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Licenses. The configuration window opens from where you can load license files which define functions
available in the system.
Click Install License the browse window will open. Specify the license files location and click Open.
The license is installed, and the system licensing window displays information on the license type and scope of
functions.
After the license is installed, the Install License button will change to the Restore License button. Clicking the
Restore License button, you return to the previous license. After the Licensing window is closed, the latest
displayed in the window license will be applied.

Note: If the radioserver and the dispatch console are installed on one and the same machine, you can install the
licenses either in SmartPTT Radioserver Configurator or in SmartPTT Dispatcher. If the radioserver and the
dispatcher console are installed on different PCs, you need to install the licenses in both applications.
1.5.3 General Settings
In the General Settings window you can configure the global settings of the SmartPTT Dispatcher application
(e.g., user interface language, automatic update, etc).
To set the settings, expand the Settings menu in the Main Menu bar and select General Settings. At that, the
following window will appear.

Language: Allows you to change the language used in the dispatch console. After selecting a new language,
restart SmartPTT Dispatcher to apply the change.
Windows authentication: It enables Windows authentication within the dispatch console. For that, create the
operator with the name of the Windows user, or the Windows group to which the Windows user is assigned.
Note: In Windows 7, for the domain Windows user only domain Windows groups will be checked. Starting from
Windows 8, for the domain Windows user all Windows groups will be checked (whether domain or local).
If Windows authentication is selected, the dispatch console is opened under the operator's account, whose
name matches the name of the logged in Windows user, or Windows group to which this logged in Windows user
is assigned. At that, the Authorization window will be skipped and the operator's password ignored. In the
dispatch console, the button Change Operator will be unavailable and the user will not be able to change
operator.
If Windows authentication is not selected or the operator's name does not match the name of the logged in
Windows user, or the Windows group, the Authorization window will open, and the user will need to select the
operator and type the password.
Launch the dispatch console on Windows start: Enables automatic launch of SmartPTT Dispatcher on
Windows start with the selected operator. This feature does not work if Windows authentication is selected.
Subscriber ID input method sets the input and display methods used for showing subscriber ID in the radio
subscriber Properties window: IP address or CAI + subscriber ID.
IP Address IP address is entered and displayed in the subscriber's Properties window: .
CAI + Subscriber ID (CAI network ID and a unique radio ID) are entered and displayed in the subscriber's
Properties window: .
Call alert tone duration (s): Sets the duration of the call alert sound in SmartPTT Dispatcher.
Outgoing call tone: This alert tone plays after the PTT button is pressed and the operator is able to transmit on
the channel. This is to prompt the operator to begin speaking.
Ask for confirmation before closing or changing the operator: If selected, you will need to confirm before
closing SmartPTT Dispatcher, or before changing the operator.
To enable automatic update, select the Automatic Update check box. If the check box is selected, the system
will be checking for updates on a regular basis.

In the File path field specify the path to the ClientSetup.exe file, which you download together with SmartPTT
Software Installation Package. If a new SmartPTT version is available, when you launch SmartPTT Dispatcher (or
when you choose Check for Updates from the Help menu), the notification window will appear.
Note: After downloading the new version of the system, it is not necessary to uninstall the previous version.
1.5.4 Subscribers
In the Subscribers window, you can add, edit and delete radio subscribers. The Subscribers window allows you
to perform these actions with one radio subscriber or with several subscribers simultaneously.
To open the Subscribers window, click Settings > Subscribers.

To add one radio subscriber, click Add, specify its properties in the Properties section on the right and click
Save.
To edit one radio subscriber, select this radio subscriber in the Subscribers list, change the required data in the
Properties tab on the right and click Save.
To delete one radio subscriber, select this radio subscriber in the Subscribers list, click Delete and click OK in
the Confirmation window that will open.
To add several radio subscribers, click Multiple adding.

In the Radio ID field of the Properties section, input the range of the radio identifiers that are added or specify
them separated by comma. Specify other properties, common for all radio subscribers, that are added, and click
Save.
To change the properties of several radio subscribers, select the required radio subscribers in the Subscribers
tab, change theirs properties and click Save.
To delete several radio subscribers, select the required radio subscribers in the Subscribers tab, click Delete
and click OK in the Confirmation window that will open.
1.5.5 Control Devices
In the Control Devices window you can select and configure the control device to be used in SmartPTT
Dispatcher. This can be a mouse, touchscreen, keyboard or other external input device.

To define the control device, expand the Settings menu in the Main Menu bar and select Control Devices. At
that, the following window appears.
The window is divided into three group boxes, devoted to a mouse, a touchscreen, and to external devices.
Under Mouse and Touchsreen you can select the action that will be performed at clicking or tapping, and PTT
mode. These settings will be applied to several panels: Radio Fleet, Subscribers, Call Windows, Custom
Consoles, Emergencies. The Calls panel does not support these settingssingle click is applied there.
The External Devices group box allows you to set up the following devices:
keyboard;
external input USB device;

external input device connected via COM port.
To assign PTT to a keyboard button, click on the button next to Keyboard PTT, and press a
keyboard button. At that, the pressed button will appear. To define the PTT mode (i.e., pressing and release),
select Hold, or Single press.
To set up the PTT button on any external input device connected via USB, select Other Input Device and choose
the required device from the list. Then, click on the blue button next to Device PTT Button and press any button
on the device.
External Device COM Port COM port used to connect to the external PTT device.
There are two modes available for the PTT button on external devices: Hold and Single press.
To save changes, click Finish.
1.5.6 Radioservers
To connect the existing radioserver to the dispatcher console, expand the Settings menu in the Main Menu bar
and click Radioservers. The configuration window for setting up and configuring radioservers opens up.

By default, the list of radioservers is empty. Click Add to open the window for adding radioservers.
Name radioserver name displayed in the list of radioservers.
Address, Port radioserver IP address and port number to connect with the dispatcher (the default radioserver
port number is 8888). Make sure that the Address and Port you enter match the Address and Port specified in
SmartPTT Radioserver Configurator.

In this example we use port 8888.
Proxy:port is a proxy server IP address and port number of the connection.
Fields Login and Password must be filled if authentication is enabled on the radioserver side. To enable
authentication on the radioserver side, run SmartPTT Radioserver Configurator, click Radioserver, select
Windows in the Authentication field. Currently, you can select only Windows authentication. If Windows
authentication is selected, you can't connect the dispatcher console and the radioserver without indicating valid
credentials in the Login and Password fields. If the radioserver computer makes part of a domain, indicate the
domain login and password, if not indicate local login and password.
Note: If No is selected in the Authentication field, make sure that the fields Login and Password in the
dispatcher console are empty. Otherwise, the dispatcher console and the radioserver can't connect.
Active if selected, the radioserver is available for connections. You should also remember that you do not have
to remove the radioserver from the list to disable it. It is enough to clear the check box.
Operator list of all active operators created in SmartPTT Dispatcher.

Profile Name enter profile name defined for the dispatcher in SmartPTT Radioserver Configurator. If Profile
Name is not specified, the dispatcher has access to all radios, talkgroups and services provided by the
radioserver. If the profile name is incorrect, the radioserver will be marked red.
Note: Profile management is described in the SmartPTT Radioserver Configurator help file.
After all the fields are completed, click OK. At that, the new radioserver appears in the list of radioservers.
To edit the radioserver settings, select it in the list of radioservers and click Edit. To delete the radioserver, select
it in the list of radioservers and click Delete. To find all the running radioservers in the network, click Search.
1.5.7 Operators
By default, an operator with the name Administrator and no password is created in SmartPTT Dispatcher. The
Administrator has full access to SmartPTT management functions.
The Administrator can add new system operators and customize their access to specific functionality.
To add a new operator, click Settings > Operators in the Main Menu bar. At that, the Operators window will be
displayed.

To add a new operator, click Add. A new window for adding operators opens up.
Name: The operators name. If Windows authentication is selected (Settings > General Settings), make sure
that the new operator's name matches the name of a Windows user or Windows group.

Status: The operators status (Active or "Archived"). Status in the archive is used for registered operators which
are not used any longer, but cannot be removed from the system as the event log contains entries referring to
them.
Rights: A list of permissions which can be selected or cleared for each operator individually. The following rights
can be assigned to the operator:
Right Description
Add/Delete subscriber units allows/denies adding, changing properties and deleting
radio subscriber in the Radio Fleet window and in the
Subscribers panel
Manage unregistered subscriber units shows/hides subscribers which were not added in the
Radio Fleet window or in the Subscribers panel
Make voice calls allows/denies making calls to radio subscriber except
conference calls
Note: This option does not have visual effect in SmartPTT
Dispatcher
Connect with external dispatcher allows/denies the connection of the dispatchers to each
other
Note: Requires preliminary configuration in the each
dispatch program
Make telephone calls allows/denies making call to the telephone subscriber
Change channel on control station allows/denies changing the channel of control station
Block/Unblock radio allows blocking/unblocking subscribers listed in the Radio
Fleet window
Remote monitor allows/denies the remote monitoring of radio subscriber
(remote turning on the microphone of the radio unit)
Note: Permission must be configured on the radio
subscriber unit
Reboot control station allows/denies rebooting the control station

Right Description
Manage subscriber location settings enables/disables configuring regular requests for radio
subscriber location in the Location tab
Request subscriber location allows/denies requesting and deleting current location of
the radio subscriber:
Set Location Find on Map
Show Address Remove from Map
Send text message allows/denies sending text messages to the subscriber
Send telemetry commands allows/denies sending telemetry commands
Manage routes enables/disables managing routes
Manage geofences enables/disables managing geofences
Manage points of interest enables/disables managing points of interest
Manage tracks enables/disables showing, animating, and clearing tracks
Build reports allows/denies managing reports
Edit custom subscriber properties enables/disables configuring additional properties of the
subscriber
Attach radios to selected channel enables/disables displaying subscribers as attached to
the particular slot in Radio Fleet window. This option is
recommended to be set for Capacity Plus systems
Make conference calls enables/disables making conference calls
View radioserver event log enables/disables showing radioserver event log
Create deferred action enables/disables creating deferred actions for subscriber
Manage statuses enables/disables creating, editing and deleting statuses;
Manage rules and alerts allows/denies creating, editing and deleting rules and
alerts
Manage positioning rules allows/denies managing positioning rules
Manage lone worker rules allows/denies managing lone worker rules

Set/Change Password: Sets new operator's password or changes the old one.
To edit an operator, select it in the list of operators and click Edit. The edit window is displayed where you can
change Name, Status and Password parameters.
To delete an operator from the operators list, select it and click Delete.
Note: You cannot delete the Administrator from the system.
To switch operators, click in the Main Menu and after the dispatch console has restarted, select a new
operator.
1.5.8 Statuses
You can create statuses to assign to radio subscribers (for example, Available, On Call, In Place or Busy). Each
radio subscriber can have a status showing their current state. The status is set either by the dispatcher or by the
radio subscribers themselves.

To set up statuses, expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Statuses. At that, the configuration window opens.
To add a new status, click Add in the Active tab. A window for adding a new status opens.

Name status name to be displayed in SmartPTT Dispatcher.
Color status color to be displayed in SmartPTT Dispatcher.
System Message message which triggers status change, that is if a radio subscriber sends this message to
the dispatcher, the subscriber receives the status.
Sound audio file played back if the status is activated.
Click OK, and the new status is added to the list of statuses.
To edit the existing status, select it in the list of active statuses (the Active tab) and click Edit.
To delete the status, select it in the list of active statuses and click Delete. You can delete a status only if it was
never assigned to a subscriber. If the status is currently assigned to a subscriber or used to be assigned, it can't
be deleted. But, it can be moved to an archive. Characteristics of the archive statuses are:
They can't be assigned to radio subscribers.
They can't be used in the alert rule definitions. However, the archive status remains valid as an alert rule
criteria for a particular rule, if it was selected as such before being moved to the archive.
They are displayed in the event log entries.
They can be restored from the archive.

To see the list of archive statuses, open the Archive tab of the Statuses window.
To move the status to the archive, select the status from the active status list, click Delete and click OK in the
opened dialog box to confirm the action.
In order to restore the status from the archive, select the status from the archive list, click Restore and then click
OK in the opened dialog box to confirm the action.
1.5.9 Events and Notifications
The Events and Notifications window provides the following settings:
Event log settings,
Settings for the Emergencies panel,
System message settings.

To open Events and Notifications window on the Settings menu click Events and Notifications. The
Configuration window appears. You can switch between tabs here to configure the event processing in the
system.

Event Log
The following settings are available to you:
Save Events to Log: Select to make records on the event in the SmartPTT Dispatcher database.
Maximum number of records to be shown: Enter the maximum number of the latest events you want
to see in the Event Log.
Event Log Parameters: Configure the deletion of records from the Dispatcher database:
o Do not truncate: Click to add new records to the database until it reaches it maximum space on the
hard drive.
o Records retention period (days): Click to delete records which older that particular number of days.
Enter the number of days in the field next to this option.
Show time with milliseconds: Select to show milliseconds in the Event Log.

Notification Panels
Emergencies: Configure the emergency situation processing:
o Notify dispatcher about emergency: Select to open the Emergencies panel automatically and/or
show the subscriber on the map if Maps are opened.
o Category for Emergencies: Click Browse to select the category (only one) of emergency
situations (see Categories).
o Play Sound File: Click Browse to select the audio file, which should be played at the emergency
situation.
Note: The Emergencies panel appears only when emergency signal is registered. You cannot open it
manually.
Latest incoming calls: Configure the latest calls processing:
o Remember the latest incoming calls: Select to make records about the latest incoming calls (see
Latest Incoming Calls).
o Number of the latest calls: Enter the maximum number of records about the latest incoming calls.

System Messages
Network events: Configure network events processing:
o Errors: Select to show error messages in the System messages panel.
o Warnings: Select to show warning messages in the System messages panel.
o Information Messages: Select to show information messages in the System messages panel.
Note: If you unselect Errors, you will get error messages in separate windows instead of that in the System
messages panel.
Play Sound File: Click Browse to select the audio file, which should be played when system
messages appears.
To save changes and close the window, click Finish. To cancel changes and close the window, click Cancel.

Emergencies
The Emergencies panel appears in SmartPTT Dispatcher when subscriber sends an emergency alarm.
Operator can make the following actions:
Call the talkgroup which is preconfigured in the radio via the MOTOTRBO CPS program. To start the call it
should click PTT.
Mute the emergency alarm by clicking Mute .
Report about the solution found for the situation. When operator clicks Close Emergency , the panel
closes. However, the emergency mode of the radio stops only when subscriber turns it off on the radio.

1.5.10 Call Windows
To configure the parameters of the Call Window, expand the Settings menu in the Main Menu bar of the
SmartPTT Dispatcher window and click Call Windows. At that, the configuration window opens where you can
configure the appearance and functions of the Call Window.
Call Window Closing Timeout (s) sets the time period in seconds at the end of which the Call Window
closes automatically.
Note: If you enter 0 in the field, the Call Window won't close automatically.
Open Call Window for Event Types specifies types of events triggering the Call Window opening
(Registration, Call, Message, Telemetry, Alarm, Status, Block Radio, Job ticket, Radio Check).

Maximum Number of Opened Call Windows allows you to set up the maximum number of call windows
opened automatically.
Show Photo in Call Window select to display the subscriber's photo in the Call Window.
Show Pinned Call Windows on Console Launch if selected, the position of the Call Windows, pinned
before the SmartPTT Dispatcher application closing, will be restored during next launch.
Set Focus to Call Window upon Popup select the check box to focus on the Call Window when it is
opened or have a new activity.
Reset Saved Call Window Positioning click the button to reset the current position of the call windows.
1.5.11 Sound
Warning! For proper operation, make sure that you have a working microphone. If not, you won't be
able to make or answer calls.
To set audio device settings and VoIP parameters, expand the Settings menu in the Main Menu bar of the
SmartPTT Dispatcher window and click Sound Settings. At that, the configuration window opens up.
The Sound Settings window includes:
1. General Settings tab
2. Audio Output Devices tab
3. Other Settings tab

The General Settings tab:
Audio Input parameters:
Device audio device to which the microphone is connected. It is recommended to select the audio input device
explicitly.
Input Line audio mixer line used to connect a microphone.
Noise Reduction allows making dispatcher sound clearer by reducing noises. You can choose several levels
starting from 3 to 18 dB. If voice and noise levels are the same or close, do not enable noise reduction.
Audio Input Test allows checking quality of microphone performance. To test your microphone performance,
click Record and then talk into the microphone. Stop recording by clicking Stop, which appears instead of

Record. To listen to what you have just recorded, click Play. You can also save the recording in MP3 format by
clicking Save.
Audio Output parameters:
Device audio device to which headsets or speakers are connected. To check quality of the audio output device
performance, click Check. At that, you will hear a sound. To stop the sound, click Stop.
VoIP Parameters:
Codec audio stream compression method.
Codec Format audio stream sampling frequency.
VoIP Port audio stream receive port.
Specifications of the codec format 8000 Hz, 20 ms, 64 (86) kbps:
8000 Hz the sampling rate
20 ms the frame size
64 kbps the voice data bit rate
86 kbps a full bit rate (required network bandwidth)

Starting from version 8.3, dispatch console allows you to set up different audio output devices, including multiple
channels, for different subscribers, talkgroups, slots, etc. e. g., you can listen to radio subscribers on the
headset, and the external dispatcher on the speakers. To do that, open the Audio Output Devices tab.

1. Add audio output devices in the first box on the left. These are not real output devices and are used only
in dispatch console. To do that click on Add. A new record will appear on the list. Change its name, if
necessary, by clicking Edit, and then select it.
2. In the list below, select the real devices or device channels which will correspond to the added output
device.

3. In the Objects list select the network object, for which you want to set up the new audio device or
channel. And in the Select Audio Output Device dropdown list select the created output device. Thus,
you assign the audio output device or channel to a network object.

To assign another device to an object, you can do it in its Action List in the Subscriber Panels.
The Objects section contains also the following categories of objects that may use personal audio output:
Selected objects: selected radio objects or radio objects with opened call window, including call windows of
telephone calls, dispatchers calls and conferences. The volume of the selected objects is adjusted on the Sound
panel.
Unselected objects: unselected radio objects with inactive call windows. The volume of the selected objects is
adjusted on the Sound panel.
System sounds: outgoing call tone, play sounds alerts for incoming calls from dispatchers and telephone
subscribers, play sounds when the rule is triggered, record from the event log, sound of the system message, call
alert. The volume of the system sounds is adjusted on the Sound panel.
Alarm: emergency sound and voice of emergency call. The volume of emergency sound cannot be adjusted and
muted. The volume of voice of emergency call can be adjusted in the Properties window of a slot in the Common
tab (it is also possible to mute the volume of a slot and/or talkgroup).
Selected objects, Unselected objects and System sounds always have the Main Device audio output assigned
by default. The Alarm object does not have any audio output device assigned by default.
Note: If the Alarm object does not have any assigned audio output device, in a case of alarm situation sound
of the Alarm object will be played back on the audio device of either the selected objects or unselected
objects (it depends on whether the object which sends the alarm signal is selected or not).
Thus, sound of the radio fleet object can be played back on the following audio devices:

Audio device assigned to Selected objects, if the object is selected.
Audio device assigned to Unselected objects, if the object is unselected.
Personal audio device assigned to the particular radio fleet object.
Parent audio device, i.e. the audio device assigned to a parent object.
Audio device assigned to the Alarm object, if there is an alarm signal (emergency sound, voice of
emergency call).
If the Use the personal audio output only check box is selected, the assigned audio output will be used only
by this object independently of any conditions. The Use the personal audio output only option disables audio
playback of the given object on the audio devices assigned to parent object and Selected objects/Unselected
objects.

To reset all settings of audio output devices, click Clear All.
The Other Settings tab allows the operator to improve receiving and transmitting the sound:
Disable complete sound muting allows/denies muting in SmartPTT Dispatcher. The minimal sound level is
10% (left position of the slider control) and the maximum is 90%. This setting effects only on SmartPTT
Dispatcher and depends on the sound level in your operating system.
Mute Mode provides options for the muted station (setting Mute is active in the action list for the control
station):
In Basic mode all sounds from this control station will be muted,
In Advanced mode muting will not be applied for incoming private calls, dispatcher-initiated calls and dispatcher-
answered calls.

Increase Dispatcher Sound allows/denies amplifying the voice of the dispatcher on subscriber unit. It can be
adjusted by the slider control.
Listen calls of other dispatchers allows muting other dispatchers:
Disable listening calls of other dispatchers activates/deactivates muting other dispatchers,
For all dispatchers mutes voices of all dispatchers connected to radioserver,
Specify dispatcher's location mutes dispatchers who entered the same location name into the text field.
Location is to be one-line text containing up to 50 symbols including unprintable signs.

1.5.12 Records
To set audio record settings, expand the Settings menu in the Main Menu of the SmartPTT Dispatcher window
and click Records. The Audio Record Settings window opens.
Records: Set the parameters of call recording.
o Record calls: Select this option to record all the incoming and outgoing calls.
o Audio records folder: Set the path to the folder with recorded audio files.
o Audio file extension: Select the proper extension of the file. Choose between the MP3, OGG and WAV
extensions

o Fixed sample rate (8 kHz): Select this option to set the record quality of the audio file with a sampling
rate of 8 kHz. This setting allows you to reduce the size of the saved audio file due to no major loss in
sound quality.
o Recording volume of outgoing calls: Increase or decrease the sound volume for recording outgoing
calls.
Audio files search paths: Set paths to additional folders for recorded audio files.
Note: After changing the path to the stored audio files, the previous path is automatically added to the audio files
search path field.
Audio records cleanup settings: Set audio record cleaning parameters.
o Do not delete audio records: Select to keep as much of events in the log as possible in the hard drive.
o Records retention period (days): Select to enter the maximum number of the last days to be logged.

1.5.13 Positioning Systems
To define GPS or Indoor settings, expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher
window and click Positioning Systems. The Positioning Systems window will open.
The Coordinates tab contains the following parameters.
Validity of GPS coordinates: The parameter sets GPS data validity period in minutes. If new GPS coordinates
were not received during this period, the subscriber's label is removed from the map.
Validity of beacon signals: The parameter defines the time period during which the received beacon signal is
relevant. If new beacon signals were not received during this period, the subscriber's label is removed from the
building plan.

Time interval for GPS coordinates update: It sets the default time interval for updating radio's location data.
The value set in this parameter will be applied to all unregistered radio subscribers, and will be displayed in the
Properties window of a radio subscriber in the Location tab.
Accuracy Radius: It sets the maximum coordinate error margin. If the received error value exceeds the value
specified in this field, the coordinate is invalid.
Color of Subscriber with Valid GPS Location: It sets the color which will be used for a radio subscriber's label
with valid GPS locations.
Address Data Provider: It defines the map service (Google or OpenStreetMap), which will determine the object
address on the map corresponding to the subscriber's current GPS-coordinates.
Data Format: It defines the format of location data to display in the subscriber Call window:
Coordinates: It allows you to select the format of GPS coordinates:
Decimal degrees. GPS coordinates are displayed as: lat: 56,47568, long:84,98779.
Degrees, Minutes, Seconds. GPS coordinates are displayed as: lat: 5628'32", long:8459'16".
Universal Transverse Mercator Coordinate System. GPS coordinates are displayed as: 45V 376108 B
6260913 C.
Speed Format: It allows you to select the format of a radio subscriber's speed.
System of Units: It allows you to select the measurement system (Metric or Imperial).
Note: When changing measurement system, the data previously logged won't be recalculated according to the
new measurement system.
Save GPS Locations in Database: It defines if GPS coordinates received from subscribers will be stored in the
database.
Database cleanup settings: It defines the scheme of deleting coordinates from the database.
The Map tab contains the following parameters.
Show Subscribers Information for Map Label: It defines what information will be shown on a map label of a
radio subscriber.
Size of Subscribers Map Label: It sets the size of a subscriber's map label.
Hide subscribers with outdated locations: Select the check box to hide map labels for subscribers with
outdated GPS locations. GPS location becomes outdated if it was not updated during the period set in the
Validity of GPS coordinates field.

Hide offline subscribers: Select the check box to hide a map label when a subscriber goes offline.
1.5.14 Telemetry
To set up actions based on incoming/outgoing telemetry commands, expand the Settings menu in the Main
Menu bar of the SmartPTT Dispatcher window and click Telemetry. At that, a configuration window is displayed.

To add a new telemetry command, click Add. The Telemetry Settings window is displayed.
Description description of the action to be triggered.
Contact select a contact or VIO from the list.
Note: Make sure the selected contact or VIO is mapped to a physical GPIO line in MOTOTRBO CPS.
Direction select direction (incoming or outgoing).
Action action type: impulse, high level, low level, toggle level.
To save the changes click OK the created settings appear in the list of settings.
To edit the existing settings, select the entry in the list of settings and click Edit.
To delete the settings, select the entry in the list of settings and click Delete.
How to Assign Telemetry to the Radio Subscriber

You can select telemetry settings in the subscriber's Properties window.
Note: Only registered subscribers can be assigned to a telemetry command. For not registered subscribers the
Telemetry button will be unavailable.


Click the Telemetry button to open the window for selecting available telemetry commands for the subscriber.
Select the required command to make it available in the Call Window of the radio subscriber and in the custom
consoles. Also, it allows you to set automatic status updates of the GPIO pins. To receive status updates of the
GPIO pins automatically, select the required GPIO pins in the Update GPIO pins' status area and set the update
interval in seconds.
Note: Automatic GPIO pins' status update is applied only for incoming telemetry commands.
Then you can run the telemetry command from the subscriber's Call Window.

To receive the current telemetry status, click . The updated status will be displayed in Call Window of the
radio subscriber.

How to Assign Telemetry to the Talkgroup of Radio Subscribers

You can select telemetry settings in the Properties window of the talkgroup.

Click the Telemetry button and select available telemetry commands for the talkgroup.
Then you can run the telemetry command from the talkgroup's Call Window.

1.5.15 Categories
To create a category structure, expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher
window and click Categories. The configuration window for setting up the category structure opens.

Show "No Category" Folder displays a list of all online subscribers (radio subscribers, talkgroups) in the No
Category folder of the Radio Fleet panel (filter by category), without reference to categories.
To create a new category, click Add in the Categories window.

To edit the existing category name, select it in the list and click Edit. To remove a category, select it in the list
and click Delete.
To move categories inside a parent category, use arrow button on the right. To move the categories between
levels, click on a category, hold the left mouse button and drag it to a new position.
The categories are displayed in the Radio Fleet panel (filter by category is selected).

Click the button next to the category name to apply actions to all the subscribers from the category.
Send Message opens the window for sending messages.
Show on Map displays all subscribers from this category on the map, if it is opened.
Remove from Map removes all subscribers of this category from the map, if it is opened.
View Properties opens the window of properties of the category. Also you can right-click on the category name
in order to open this window.

The Category window consists of three tabs: Common, Subscribers, Talkgroups.
The Common tab:
Name the category name.
Status the general status of all subscribers in the category. If the status of at least one subscriber in the
category is changed, the category's general status becomes undefined.
Update location the group of the general GPS-monitoring settings of all subscribers in the category. The
parameters of the general GPS-monitoring settings can have three possible states:
Checked . Shows that the parameter is set for all subscribers in the category.
Unchecked . Shows that the parameter is not set for all subscribers in the category.
Mixed choice . Shows that the parameter is set for some subscribers in the category.
The parameters of the general GPS-monitoring settings are unavailable, if all subscribers in the category have
GPS disabled in the Properties window (the Locations tab).
The Subscribers tab contains the list of all subscribers in the system. In order to assign a subscriber to the
category, select the appropriate check box in the list of subscribers. Only registered subscribers can be assigned
to a category. Not registered subscribers will be in italics on this list, and you won't be able to select them.
The Talkgroups tab contains the list of all talkgroups in the system. In order to assign a group to the category,
select the appropriate check box in the list of talkgroups.
Note: Radio subscribers and talkgroups can be assigned to a category. However, the actions applied to the
category members will be addressed only to radio subscribers.
1.5.16 Dispatchers
SmartPTT Dispatcher allows you to connect to other dispatchers who use the SmartPTT system. But before
connecting to other dispatchers you must check or do the following:
1. Make sure that the operator has the permission Connect with external dispatchers (Settings >
Operators). If not, the Dispatchers button will be unavailable in the Main Menu, and calls to other
dispatchers will be impossible.

2. Make sure that at least one dispatcher is added to the dispatchers list in Settings > Dispatchers. If the list
is empty, the Dispatchers button will be unavailable in the Main Menu even if the permission
Connect with external dispatchers is selected.
To set up connection to other dispatchers, expand the Settings menu in the Main Menu bar and click
Dispatchers.
VoIP Port UDP port of this dispatcher's PC for voice transmission. The default value is 18501.
Session Port TCP port of this dispatcher's PC for transmission of commands and text messages. The default
value is 18501.
Play Sound Alert for Incoming Call select this check box to play a tone for an incoming call.
Play Sound Alert for Outgoing Call select this check box to play a tone for an outgoing call.

To add a new dispatcher, click Add.
Name the dispatchers name displayed in the list of dispatchers.
Address IP address of the dispatcher's workstation (DNS name can be used).
VoIP Port UDP port for voice transmission.
Session Port TCP port for transmission of commands and text messages.
Select the path to the file of the dispatcher's photo.
Sound for Incoming Call Alert the path to the sound file which will play in the dispatch console when this
dispatcher calls.
To save the changes, click OK. At that, a new dispatcher is added to the list of dispatchers.
To edit dispatcher settings, select it in the list of dispatchers and click Edit.
To remove a dispatcher, select it in the list of dispatchers and click Delete.

To call the dispatcher, open the Dispatchers window by clicking the button . At that, the following window
opens.
On the left you can see available dispatchers with different statuses. These can be:
Offline the dispatcher is not available for communication. This means that the dispatcher has not launched
SmartPTT Dispatcher, or does not have the permission (Connect with external dispatchers).
Online the dispatcher is available for communication.
Ringing calling to the dispatcher to establish voice communication.
Call voice communication is established.
To call a dispatcher, select it from the list, and click Connect. To end the call, click Disconnect (this button
appears as soon as you have started communication).
To add online dispatchers to a conference call, click .
To mute your voice transmission, click . You will still hear the other dispatcher. This button becomes
available when the call is started.
To send a message to the selected dispatcher, enter the text of the message and click .

To answer or decline the incoming call from a dispatcher, click Accept or Decline in the opened window:
If the incoming call is made by the dispatcher not on the list you will see its IP address in the Incoming call
window. You can add the unregistered dispatcher in the Dispatcher window by clicking on the Add button.

1.5.17 Telephone Subscribers
To view the list of registered telephone subscriber, expand the Settings menu in the Main Menu and click
Telephone Subscribers. The list includes all telephone subscribers that support SIP connection. You can
modify and delete existing subscribers, or add new subscribers.

Note: SIP connection can be established also with telephone subscribers not added to the list. To make an
outgoing call, you can use a dial pad.

To add a telephone subscriber to the list of subscribers, click Add. At that, the following window opens.
Subscriber type the name of telephone subscriber.
The SIP Address area allows you to specify the telephone subscriber address.
There are several options to enter the address of the subscriber. First, the outgoing and incoming address fields
can be generated automatically using the default gateway settings. To do that, click Automatic.
Second, you can enter the addresses manually by clicking Full Address (use the following format sip:prefix
number@gateway:port).
Select the Enable SIP Account check box and specify the required SIP account from the list of available to carry
out SIP connection under the set account. For SIP account setup details in SmartPTT Dispatcher see SIP
Accounts.
Sound for Incoming Call Alert the path to the sound file which will play in the dispatch console when this
telephone subscriber calls.
Click OK to save the changes.
As soon as you have added a new telephone subscriber, it appears in the Telephone Subscribers window.
Please remember that the Allow Calls to Telephone Subscribers check box in the Telephone Interconnect
window must be selected.
To edit or delete the telephone subscriber from the list, click the corresponding button.

1.5.18 Telephone Interconnect
SmartPTT Dispatcher has a built-in function to make telephone connections with telephone subscribers. A call
can be initiated both by the dispatcher and the telephone subscriber. Standard VoIP gateways are used to
connect to telephone subscribers. The following connection options are possible:
1. The dispatcher calls the office PBX subscriber and voice is transmitted in full-duplex mode.
2. The office PBX subscriber calls the dispatcher and voice is transmitted in full-duplex mode.
3. SmartPTT Dispatcher connects telephone and radio subscribers.

Connection and subscriber addressing are implemented via SIP protocol. Voice data is transmitted via RTP
protocol.
The connection scheme:
A VoIP gateway is a device which bridge conventional telephone networks and equipment to VoIP telephone
networks.
A Private Branch eXchange (PBX) is a telephone exchange that serves a particular business or office.

The Public Switched Telephone Network (PSTN) is the network of the world's public circuit-switched telephone
networks.
SIP Architecture
Call service management is distributed between different elements of SIP network. The basic functional unit that
implements connection management are User Agents, which are endpoints of a call (that is each of the
participants in a call). The remaining network elements (SIP-servers) are responsible for call routing and can
provide additional services.
1. User Agents
User agents are both the computer that is being used to make a call, and the target computer that is being called.
These make the two endpoints of the communication session. There are two components to a user agent: a client
and a server. When a user agent makes a request (such as initiating a session), it is the User Agent Client
(UAC), and the user agent responding to the request is the User Agent Server (UAS). Even though other devices
that well discuss are optional to various degrees, User Agents must exist for a SIP session to be established.
2. Proxy Server
Proxy servers are computers that are used to forward requests on behalf of other computers. If a SIP server
receives a request from a client, it can forward the request onto another SIP server on the network. While
functioning as a proxy server, the SIP server can provide such functions as network access control, security,
authentication, and authorization.
3. Registrar Server
Registrar servers are used to register the location of a user agent who has logged onto the network. It obtains the
IP address of the user and associates it with their user name on the system. This creates a directory of all those
who are currently logged onto the network, and where they are located. When someone wishes to establish a
session with one of these users, the Registrar servers information is referred to, thereby identifying the IP
addresses of those involved in the session.
4. Redirect Server
The Redirect servers are used by SIP to redirect clients to the user agent they are attempting to contact. If a user
agent makes a request, the Redirect server can respond with the IP address of the user agent being contacted.
This is different from a Proxy server, which forwards the request on your behalf, as the Redirect server essentially
tells you to contact them yourself.

SIP determines the following addressing system: [sip:] id [@ fragment]. ID indicates user name or phone number
of the subscriber. Fragment specifies the host, which can be set to the domain name, the IP-address of the
computer or the address of the VoIP gateway. Caller ID can be presented in different ways, such as
user_name@[domain name], name@[IPaddress], phone_number@[VoIPgateway].
SIP Connection Methods

There are two SIP connection types SIP trunking and using a SIP account.
SIP trunking is used when a user agent (SmartPTT Dispatcher in our case) has a static IP address. This IP
address must be prescribed on SIP server only once, and the client does not require to re-register on the SIP
server. SIP trunking provides security by means of password authentication for incoming and outgoing calls.
If the client IP address changes periodically, use a SIP server account to establish the connection. When the
client turns on, it sends a special package for SIP registration to the server. The package contains authentication
data (SIP account user name, login, password) and the current IP address. Since then server knows where to
route calls addressed to the client. After a period of time the client automatically updates the registration. If its IP
address has changed, SIP server accordingly updates the information on this user.

Telephone Interconnect Configuration

To configure connection parameters with telephone subscribers, expand the Settings menu in the Main Menu
bar of the SmartPTT Dispatcher window and click Telephone Interconnect.
The Telephone Interconnect window includes:
1. General settings
2. Codec settings
3. SIP Trunk Authentication
4. SIP accounts
General Settings
The General Settings tab includes Dispatcher Settings and VoIP Gateway Default Settings sections.

1. Dispatcher Settings
Allow Calls to Telephone Subscribers select the check box to be able to make and receive calls between
SmartPTT Dispatcher and telephone subscribers.
Note: If the check box is not selected, the Telephone Subscribers window is unavailable.
RTP Ports each connection with the telephone subscriber requires two UDP ports (even port numbers are used
by RTP protocol, uneven by RTCP). Thus, the specified ports must be available both for incoming and outgoing
traffic. The default port range is 1870018748.
Warning! If both SmartPTT Dispatcher and SmartPTT Radioserver are installed on one computer, the
port range set in the "RTP Ports" field in SmartPTT Dispatcher must differ from the port range set in the
"RTP ports" field in SmartPTT Radioserver Configurator.
Interface IP address of the local computer, used to receive and transmit commands and voice data. If the
dispatcher's computer has only one IP address, the system can select it automatically; if it has more than one IP
address, the IP address (interface) should be specified expressly. The specified IP must be available from the
VoIP gateway end.
Warning! If several network interfaces are installed on the computer you may have to configure the
routing table using the command "route add ...".
SIP Port UDP or TCP port number to receive and send SIP data packets. The default value is 5060.
Accordingly, the specified port must be available for incoming and outgoing traffic.
Warning! If both SmartPTT Dispatcher and SmartPTT Radioserver are installed on one computer, their
SIP ports must differ. In this example it must be 5061 because 5060 is already taken by the radioserver.
Displayed Telephone Number type the telephone number which allows you to connect to SmartPTT
Dispatcher. This number is also displayed on the screen of the receiving SIP call device (phone or softphone).
Subscriber Name type the name to be displayed on the screen of the receiving SIP call device (phone or
softphone).

2. VoIP Gateway Default Settings

If VoIP Gateway Default Settings are specified, it is enough to set only subscriber phone numbers in the List of
Subscribers tab. Also, these parameters are used to dial the called subscriber number manually (click the Dial
Pad button and the Dial Pad window opens).
Default VoIP Gateway Address the VoIP gateway IP address.
SIP Port a VoIP gateway to receive and send SIP data packets. By default VoIP gateways use the UDP port
5060.
Dial Prefix for Outgoing Calls numeric prefix added to the called subscriber number by SmartPTT Dispatcher.
VoIP gateway uses the prefix to determine where the call came from and what rules it must apply to the call
(block or allow, where the call must be routed).
Dial Prefix for Incoming Calls numeric prefix value in this field must match the same VoIP gateway prefix.
If default VoIP gateway is used, the telephone subscriber's complete SIP address will be as follows:
SIP address = Dial Prefix for Outgoing Calls + Phone Number + @ + Default VoIP Gateway Address + : +
Gateway SIP Port.
Example:
If the following settings are used:
Default VoIP Gateway Address = 192.168.0.243
SIP Port = 5060
Dial Prefix for Outgoing Calls = 12
The telephone subscriber with the phone number 1140 is automatically assigned the following outgoing SIP
address = 121140@192.168.0.243:5060.
Note: If your network uses a firewall, consult a network administrator about the possibility of using SIP protocol
and the required settings. The most common problem is that the media streams (for example, voice) are
transferred over dynamically assigned UDP ports that are generally closed. The firewall must be able to
dynamically open and close ports based on the transferred SIP signaling. Another problem is that the SIP clients
inside the firewall cannot be reached by IP addresses since these most often are private and local to the LAN.
Communication simply does not take place, unless there is specific SIP support in the firewall.
Play Sound Alert for Incoming Call select the check box to enable ringing at the SmartPTT Dispatcher
application when a telephone subscriber calls.

Play Sound Alert for Outgoing Call select the check box to enable ringing at the SmartPTT Dispatcher
application when making a call to a telephone subscriber.
Sound Level allows you to configure the sound level in the dispatch console coming from the telephone
subscriber.
3. VoIP Gateway Configuration

The VoIP gateway administrator must ensure that SIP addresses for incoming calls are appropriately interpreted
and switched to phone numbers.
In the example above the telephone subscriber address is sip:121140@192.168.0.243:5060 and the dial prefix for
outgoing calls is 12. Therefore VoIP gateway rules must discard the incoming prefix 12 from the full address and
connect the dispatcher to the telephone subscriber number, that is 1140.
You should also configure appropriate generation rules for outgoing SIP addresses to call other dispatchers.
For example, if the telephone subscriber with the number 1140 assigned wants to connect to the dispatcher with
the address 192.168.0.105:5060, then generation rules for outgoing SIP addresses on the VoIP gateway must
generate the correct destination address sip:1@192.168.0.105:5060 (the Displayed Telephone Number value
must be set as the SmartPTT Dispatcher identifier) and the sender's correct address
sip:1140@192.168.0.243:5060 (a dial prefix for incoming addresses is not set so the name in the sender's
address is the same as the phone number).
Codec Settings
In the Codec Settings tab you can enable or disable supported audio codecs, as well as change their priorities.
Currently, there are 4 audio codecs: G711A, G711Q, SPEEX G729.

SIP Trunking Authentication

The Telephone Interconnect window contains authentication settings in a separate tab.
Incoming Call Authentication the setting includes parameters required for incoming call authentication. When
an incoming call from a phone/softphone is received, dispatcher asks user name and password corresponding to
Realm in the described setting. Calling subscriber must send back user name and password specified in this
setting. The authentication type is not required if the incoming call is addressed to subscriber using SIP account
for connection. To activate this ability, select the Enabled check box.
Realm parameter used for the incoming telephone calls authentication.
User Name name of the user used for authentication.
Password password used for authentication.
Outgoing Call Authentication the setting includes parameters required for outgoing call authentication.

Realm if not set, SmartPTT Dispatcher responds to any any authentication request with specified user name
and password. If set, SmartPTT Dispatcher responds only to authentication requests that matches the Realm
value.
User Name user name used for authentication.
Password password used for authentication.
SIP Accounts
If SmartPTT Dispatcher IP address varies, there must be a mechanism for determining its current value. In order to
do this, SIP registration can be used, allowing the dispatcher to inform SIP server of its actual IP address.
For example, Client 1 has current IP address 192.168.0.224, Client 2 192.168.0.98. It is necessary to establish
connection between them, while both subscribers are not aware of each other's IP addresses. To do this, create
accounts on SIP server (sip_server.com) for both subscribers user1 (sip: user1@sip_server.com) and user2
(sip: user2@sip_server.com) respectively. SIP server stores current IP addresses relevant to the SIP accounts of
Client 1 and Client 2. Therefore, Client 1 is not required to know current IP address of Client 2 to make a call.
Client 1 refers to the SIP server under its account and requests connection with Client 2 pointing out its SIP
account. The SIP server searches its database for the current IP address of Client 2, returns it to Client 1 or
redirects the call from Client 1 to Client 2.
The SIP Accounts tab in the Telephone Settings window contains dispatcher SIP account parameters. These
accounts are created by the dispatcher on various SIP servers in advance. The parameters are used to establish
connection with other server subscribers.
The Status field displays the account registration status on SIP server. Possible values Registered, Not
registered, Processing, and SIP error messages.

To add a record about a new SIP account, click Add. At that, the following window opens.
Active select this check box to enable account registration on SIP server.
Display Name the name that appears on the subscriber device screen.
Username the account identifier on the SIP server.
SIP server remote SIP server IP address.
Proxy proxy server which can be used for special cases (for example, some providers insist on using proxy to
request SIP server).
Domain parameter for SIP server account authentication.
Login login for SIP server account authentication.
Password password for SIP server account authentication.
Registration Renewal Timer time period (in seconds) between requests for the dispatcher IP address update
on the SIP server.

The following example is focused on setting up connection between SmartPTT Dispatcher (Dispatcher 1) and two
other SIP clients (Linphone, MicroSIP, 3CX, or SmartPTT Dispatcher) (Dispatcher 2, Dispatcher 3). These settings
allow Dispatcher 1, Dispatcher 2, and Dispatcher 3 to interact with one another as 3CX server subscribers.
In order to do this:
1. Create SIP accounts for three SIP clients using the selected VoIP service provider, for example, accounts with
ID = 105, 106, and 107 on the 3CX SIP server.
2. In the SIP Accounts tab, as Dispatcher 1 add records corresponding to the created SIP server accounts with
ID = 105; Dispatcher 2 with ID = 106; Dispatcher 3 with ID = 107.
3. As Dispatcher 1 add records of the two subscribers (Dispatcher 2, Dispatcher 3). Connection with these
subscribers will be established via SIP server accounts.
Add the new subscribers in the Telephone Subscriber window. Fill in the Subscriber field. Click Full Address
(Automatic can also be selected if VoIP Gateway Default Settings allow you to connect to the selected SIP
server) and specify the outgoing and incoming SIP addresses corresponding to the called subscriber. Select the
Dispatcher 1 SIP account in the Enable SIP Account field (see step 2).

Created subscriber entries appear in the Telephone Subscribers window.
4. Complete the same settings for Dispatcher 2 (create account with ID = 106 in the SIP accounts tab; add
subscribers 105 and 107 in the List of Subscribers tab) and Dispatcher 3 (create account with ID = 107 in the
SIP accounts tab; add subscribers 105 and 106 in the List of Subscribers tab).

5. To apply settings, click Finish in the Telephone Settings and in the Telephone Interconnect windows.
How to Call a Telephone Subscriber
To call the telephone subscriber from the dispatch console, click the button :
At that you will see the following window:

To call the telephone subscriber, select it from the list and click Connect. In the Telephone subscribers tab you
can see not only added telephone subscribers, but also unregistered telephone subscribers (their numbers are in
italics), and three latest calls (at the top of the list).
is used for running a conference call with the selected telephone subscriber. For more information about this
function see Conference Calls.

To make a call to a telephone subscriber not on the list, go to the Dial Pad tab. You can dial the telephone
number or enter it in the input field above the dial pad.
If you need to dial an extension to reach a telephone subscriber, do the following:
1. Dial the phone number after which you will need to add the extension. Then, you will see a new tab
Extension Dialing.

2. In this tab, dial * to turn on DTMF mode (not obligatory, depends on the telephone parameters).
3. Dial the extension number and then #.
If the incoming call is made by a telephone subscriber, who is not on the list, you can add the subscriber by
clicking on the Add button, which will appear.

To connect a radio subscriber or a talkgroup to a telephone subscriber, open the Call Window of the radio
subscriber or the talkgroup and click the Call Telephone Subscriber button.
You can also use Action List, where you can select Call Telephone Subscriber. At that the following window
will open.

Select the telephone subscriber from the list and click Connect or double-click on the list item. This list is taken
from the list of telephone subscribers created in the Telephone Subscribers window. If the subscriber is not on
the list, click Dial Pad to enter the telephone number manually.
At clicking Connect, a new window with the call status opens.
There are three statuses:
Ringing
Call
Call Complete
If the connection attempt is failed, status window shows the corresponding error message.
To manage the call process, the dispatcher can use the buttons next to the call status:

- stops the call. Should the radio subscriber make a call right after the telephone call, it is necessary for him
or her to wait for a special tone notifying about the end of the call. If the radio subscriber presses the PTT button
before this tone, an incorrect phone call will be initiated.
- initiates reconnection to the telephone subscriber.
1.5.19 Job Ticket Statuses
Here you can create job ticket statuses and specify their settings. For example, assign a color to a status or add
alert on status change.
To create job ticket statuses, expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher
window and click Job Ticket Statuses. At that, the following window opens.
Enable Automatic Numbering when this option is enabled, a unique number is assigned to each new job
ticket. It is necessary to distinguish job tickets with same names.
Send notification to subscriber when uncompleted job ticket was deleted by dispatcher if this option is
enabled, a radio subscriber receives a message, if an incomplete job ticket was canceled.

Default Status the job ticket status which is displayed when the operator creates a new job ticket. The status
does not change, until the radio subscriber modifies it. You do not need to set this status in the MOTOTRBO CPS
settings. It is used only in SmartPTT Dispatcher, so you can add any value you like.
In the Color field select the color for the default status.
To add a job ticket status, click Add.
Name name of the status.
Color color of the status, which will be used in the job ticket table.
Completion status it is the final status of a job ticket. If a job ticket has such a status and if Remove job
ticket from the list within n seconds after completion is enabled, the job ticket will be hidden from the list.
Note: You can also select the Completion status later in the Job Tickets configuration window.
Sound this setting enables the sound signal which will notify the operator that a job ticket changed its status.
Warning! Added statuses must match the statuses set in MOTOTRBO CPS.
If the statuses of SmartPTT Dispatcher does not correspond to statuses in MOTOTRBO CPS, all settings (color,
sound signal and status completion) won't be applied.

1.5.20 Third-Party Equipment
SmartPTT system supports third-party equipment, for example, Tipro modular console with BeFREE
touchcomputer or without it.
To make the console work with SmartPTT system, take the following steps:
1. For Tipro modular console with BeFREE touchcomputer, install additional applications: ChangeMe Utility,
Tipro OPOS (these are delivered together with Tipro console), Microsoft Point of Service for .NET (POS for
.NET) v1.14 (http://www.microsoft.com/en-us/download/details.aspx?id=42081).
2. For Tipro modular console without touchcomputer, connect Tipro console to the PC with SmartPTT
Dispatcher installed. Install other additional software, such as ChangeMe Utility, Tipro OPOS (these are
delivered together with Tipro console), Microsoft Point of Service for .NET (POS for .NET) v1.14
(http://www.microsoft.com/en-us/download/details.aspx?id=42081).
3. Contact SmartPTT support team (http://support.smartptt.com/hc/en-us/requests/new) for Tipro configuration
file.
4. Apply the received Tipro configuration file using ChangeMe Utility.
5. Configure SmartPTT Dispatcher settings connected to Tipro support.
The SmartPTT Dispatcher configuration includes the following steps:

1. Open SmartPTT Dispatcher.
2. Enable Tipro console. On the Settings menu select Third-Party Equipment and then select Tipro
Console. In the opened window, select Enable.
At that, the version of the main Tipro module appears, and the settings become enabled. If device can't be
found, the settings are disabled.
3. Set up sound settings. You can go to the Sound Settings by clicking on Open General Settings to
change the current sound settings. You can also configure sound settings for the telephone module. This
is necessary only for Tipro modular console with BeFREE touchcomputer.

4. Add hot keys. To do that, open the Hot Keys tab.
In the Subscribers and Actions box select the subscriber, subscriber group, dispatcher or action, to which
you want to assign a Tipro key. Then click on Set and press the required Tipro key. To save changes, click
on Finish. To get back to previous settings, click Cancel.
Reset All removes all assigned hot keys.
1.5.21 Hot Keys
SmartPTT Dispatcher implements the ability to make a call to subscribers (radio subscriber, talkgroups, all call,
telephone subscriber, external dispatcher) by clicking on a predetermined keyboard key, its combination or a
button of the external input device. Also, dispatcher can repeat the last outgoing call or respond to the last
incoming call by pressing the hot keys.

In order to set up hot keys for system subscribers, expand the Settings menu in the Main Menu bar of the
SmartPTT Dispatcher window and click Hot Keys.
The window contains a list of subscribers available for the hot key assignment radio subscribers, talkgroups,
telephone subscribers, external dispatchers, last called and last active subscribers. To assign a hot key to the
subscriber, select the subscriber from the list, then select the hot key type.
Keyboard select the field to assign to the subscriber a keyboard key or a key combination as the PTT button.
Click Select, then press the keyboard key or the key combination.

Not all keyboard keys can be used as hot keys. Here is the keyboard scheme. It shows which keyboard keys can
be used and which cannot.
1. The keyboard keys marked red cannot be used as hot keys separately or in combination.
2. The keyboard keys marked yellow cannot be used as hot keys separately, only in combination with the Ctrl,
Alt or Shift keys. The Shift key can be used only in combination of three keys, for example, Shift+Alt+F.
3. The Esc key can be used only in combination with Shift (Shift+Esc).
4. All other keyboard keys can be used as hot keys either separately or in combination with the Ctrl, Alt or Shift
keys. The Shift key can be used in combination of two or three keys, for example, Shift+Delete,
Shift+Alt+Enter.
Note: Hot keys support two work modes: holding and single press. The active mode is defined in Contol Devices.

External Device select the field to assign to the subscriber a key of the external input device connected via
USB as the PTT button. Select the external device from the list of available, click the Select button, then press
the key of the external device.
External Device COM Port select the field to assign to the subscriber a key of the external PTT pedal
connected via COM port as the PTT button. Select the COM port of the PTT pedal from the list of available.
There is only one mode available for the PTT button on external devices hold to enable.
To remove the previously defined hot key for the subscriber, disable the appropriate check box. To reset the
assigned hot keys for all subscribers, click Reset All.

If a designated keyboard key or button of an external input device is already in use, the message appears in the
window:
A keyboard key or a key of the external input device which is already in use as the PTT button for a current
subscriber cannot be used as a PTT button for the selected subscriber.
Note: The PTT button used for a call to a current subscriber means that you use this button to call any subscriber
of SmartPTT Dispatcher.

Note: If the hot key that you set matches the PTT button for the current subscriber, the hot key settings will be
discarded.
Click Finish to apply the settings. To get back to the previous settings, click Cancel.
1.5.22 Database Auto Backup
Backing up data on a regular basis helps to protect it from being erased in case of the server hardware or software
failure. SmartPTT Dispatcher allows the Administrator to back up the database manually or to set up parameters
for automatic backup.

In order to set up automatic backup parameters, expand the Settings menu in the Main Menu bar of SmartPTT
Dispatcher and click Database Auto Backup.
Allow Database Auto Backup select the check box to enable the ability to create SmartPTT Dispatcher
current database backups in the automatic mode.
Backup Folder full path to the file for saving the database backup.
Backup Settings schedule for creating the current database backup:
Daily every fixed day at the specified time (for example, every day, every third day at 9:00 a.m.).
Weekly every fixed day of the week at the specified time (for example, every Monday, Wednesday and
Friday at 11:00 p.m., or every Monday at 11:00 p.m. and Friday at 11:00 a.m.).
Monthly once a month on the fixed day of the selected month and at the specified time.

Backup Period allows you to set time period when automatic database backup is to be made according to the
selected backup settings.
Note: The number of stored backup files in the same folder is limited to 3. Otherwise, when creating a new copy,
the old files are deleted.
Note: To restore the database from the automatically created backup, see Database.
1.5.23 Rules and Alerts
You can set response rules for the events registered in SmartPTT system. Response rules may include automatic
sending of messages, playing alerts in SmartPTT Dispatcher and on the radio, changing radio subscriber status,
etc.

To set rules, expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher window and click
Rules and Alerts. The configuration window opens up.

To add a new rule, click Add. The window with rule settings opens up.
Name the name of the rule.
Active select this check box to make the rule enabled.
The following table presents conditions that can be used in rules.
Attribute Operation Value

Direction No, Equals Incoming, Outgoing
Event Type No, Equals, Not Equals Registration, Call, Message, Telemetry,
Alarm, Status, Block Radio, Job Ticket,

Lone Worker
Date/Time No, In Interval Time interval
Additional Information No, Equals, Contains Type event additional information, e. g.
text messages, titles and description of
tasks, talkers from a group call.
Not Read No, Equals Read, Not Read
Operator No, Equals, Not Equals Operator from list of operators
Radioserver No, Equals, Contains Radioserver name
Control Station No, Equals, Contains Control station name
Subscriber No, Equals, Not Equals Subscriber from the list of subscribers
Talkgroup No, Equals, Contains Talkgroup name
Status No, Equals, Not Equals Status from the list of statuses
Duration No, Equals, Not Equals, Duration in seconds
Greater, Greater than or Equal,
Less, Less than or Equal, In
Interval
Connection Type No, Equals, Not Equals Connection types used in SmartPTT:
DMR over-the-air connection made via
repeaters and control stations;
PBX telephone connection
IP Dispatcher-Dispatcher connection.
Repeater IP No, Equals, Not Equals Available repeaters' IP addresses
Receiver No, Equals, Not Equals Subscriber from the list of subscribers
Record No, Equals Available audio records
Attribute contains the list of existing events which the system can register.
Operation list of possible system operations for this attribute.
Value values that can be selected for the attribute.

The rule is a combination of an attribute, operation and value. One rule can contain more than one such
combinations.
When the system has registered an event matching the specified rule, the system performs predefined actions:
1. Alerts addressed to the initiator
2. Alerts addressed to the dispatcher
3. Alerts addressed to the radio subscriber
4. Other
Note: If the conditions of the rule include Incoming (Direction), Telemetry (Type) and a selected talkgroup
(Talkgroup), the rule will be triggered regardless of the talkgroup ID where the telemetry command was sent.
The Message Format tab allows you to set the format of the alert massages.
To save the rule, click OK. At that, the created rule appears in the list of rules.
To edit the rule, select it in the list of rules and click Edit. To remove the rule, select it in the list of rules and click
Delete.
Initiator Alert
Open the Initiator Alert tab. In this tab you can set up actions that will be performed if the rule conditions are
fulfilled.
Block Radio if selected, the radio that triggered the rule, will be blocked.
Lone Worker if selected and On is clicked, the lone worker profile will be set to the radio that triggered the rule.
If Off is clicked, the lone worker mode of the radio will be deactivated.

Note: To set up the lone worker profile, see Lone Worker Rules in SmartPTT Dispatcher.
Man Down if selected and On is selected, the Man Down mode will be set to the radio that triggered the rule. If
Off is selected, the Man Down mode of the radio will be deactivated. Performing the rule with this action is
followed with service message recording to the Event Log.
Warning! In the Direction field always select Incoming for proper operating Man Down mode. Never
miss this option or select Outgoing. Otherwise, Dispatcher starts sending service messages endlessly.
In case of happening this situation, please, reconfigure the related rule following these instructions, or
reboot SmartPTT Dispatcher.
Note: Make sure that the radio subscriber unit has the built-in option board which is configured properly for Man
Down mode. To set up the Man Down feature for Motorola generic option board (GOB) or Connect Plus option
board using SmartPTT Man Down Configurator, please, refer to SmartPTT Man Down Configuration Guide. To set
up Man Down feature for other option boards including Tallysman option boards, please, refer to the corresponding
manufacturers documentation. You may always contact SmartPTT Technical Support Center for detailed
information on configuring Man Down feature.
Message a text message is sent to the subscriber who initiated triggering of the rule. You can specify message
format settings in the Message Format tab.
Dispatcher Alert
Open the Dispatcher Alert tab.
Play Sound select .wav audio file to play.
Show on Map if selected, the radio that triggered the rule will be shown on the map.

Alert notification with the event description is displayed in the System Notification window. You can define the
title in the Alert Caption field and the description in the Alert Text field.
Set Subscriber Status the subscriber is assigned the predefined status. It is selected from the Statuses list
(see Statuses).
Subscriber Alert
Open the Subscriber Alert tab.
Send Message a text message is sent to the selected subscribers, talkgroups or categories. You can specify
format settings of text messages in the Message Format tab of the Actions area.
Other
Open the Other tab.

HTTP Request is used for notification of the third party server of the changes occurred in SmartPTT system. It
can render the event initiator radio ID and its status.
The HTTP request includes the following parts:
Note: Make sure that you have specified correct names for parameters 1 and 2. They must correspond to the
parameters' names expected by the third party server.
Note: Under "@Status" SmartPTT system will send the system message corresponding to the newly assigned
status selected in the Dispatcher Alert tab. Status system messages are set in the Statuses settings.
E-mail is used for specifying e-mail address where a message should be sent in case the rules specified earlier
are fulfilled. To do this, the following fields are to be filled:
Radioserver server name which is configured for e-mail sending. The name of the server is selected from the
drop-down list.
E-mail electronic addresses to send messages.
Message text of the message.
SMS if selected, the SMS message is sent to the specified phone number in case the rules specified earlier are
fulfilled. To do this, the following fields are to be filled:
Radioserver server name for SMS messages sending. The name of the server is selected from the drop-down
list.
Phone Numbers telephone numbers to send SMS to. The preferred number format is International Number
Format, i.e. <+><country code><mobile code><phone number>.
Note: See information about SmartPTT Radioserver configuration for sending and receiving e-mails, and SMS
messages in SmartPTT Radioserver Configurator Help under Telephone Interconnect and SMS Gateway.
You can specify format settings of SMS or E-mail messages in the Message Format tab of the Actions area.

Message Format
You can specify message format (text messages, SMS, or E-mail) in the Message Format tab of the Actions
area. These messages are sent to radio subscribers, defined in the message recipient list in the Subscriber
Alert or Other tab.
Note: The format settings for text messages are valid for specific messages, only if Send Message is selected in
the Subscriber Alert tab; for SMS if SMS is selected in the Other tab; for E-mail if E-mail is selected in the
Other tab.
Event Information:
Event Type if selected, the message includes the type of the event, which triggered the rule.
Date/Time if selected, the date and time of the event will be added to the text message. You can set the date
format displayed in the message (date and time, or time only).
Time Zone if selected, the message includes subscriber time zone in Coordinated Universal Time (UTC).
Coordinates if selected, the subscriber's coordinates are displayed in the message. These are the latest
coordinates stored in the database.
Subscriber Information:
Subscriber ID if selected, the ID of the subscriber, who has triggered the rule, will be added to the text
message.
Subscriber Name if selected, the name of the subscriber, who has triggered the rule, will be added to the text
message.

1.5.24 Positioning Rules
You can set response rules for GPS and Indoor events registered in SmartPTT system. GPS events include
receiving or not receiving subscribers GPS coordinates, and Indoor events include receiving or not receiving
positioning data from special beacons. Response rules may include automatic sending of messages, playing
alerts in SmartPTT Dispatcher and on the radio, changing radio subscriber statuses, etc.
To set up a positioning rule, expand the Settings menu in the main menu and click Positioning Rules.

To add a new rule, click Add. In the window that opened specify parameters of the future rule.
Active if the check box is selected, processing of events starts in accordance with the selected criteria. If the
check box is not selected, the rule is unavailable.
Name name of the rule.
There can be two kinds of positioning rules: Indoor and GPS.
Type rule types:
Stop control this rule type checks if a radio subscriber is moving, i.e. the subscriber's coordinates or
Indoor positioning data constantly change with time.

Location data received this rule type checks the appearance of the radio subscriber's coordinates after a
predefined period of time when there were no coordinates.
No location data this rule type checks if there are no radio subscriber coordinates for a period longer than
the specified period of time. Coordinates like "...Lat: 0 Long: 0" are not regarded as valid coordinates, and
they won't be taken into account when applying positioning rules.
Zone/route entry this rule type checks if the radio subscriber has entered the zone or the route, i.e. the
subscriber's previous coordinates were outside the defined zone or route, and the current coordinates are
within this zone or the route.
Zone/route exit this rule type checks if the radio subscriber has left the zone or the route.
Speeding this rule type checks if there was any speeding based on the received GPS data.
Number of subscribers in geofences / on routes this rule type checks the number of radio subscribers
in the selected geofences or on selected routes.
The table lists the criteria used in positioning rules.
Attribute Value
All subscribers Select all subscribers, or some subscribers, or categories, to whom
Select Subscribers / Select the rule will be applied.
Categories
Time period with no motion detected Time interval during which the radio subscriber can stay at one place
(min)
Time period before receiving Period of time after which the subscriber's coordinates are received
location data again (min)
Time period with no location data Period of time during which there are no subscriber's coordinates
received (min)
Geofences and Routes Select geofences or routes to follow in the rule.
If speeding is registered, the rule is executed.
Note. The rule triggers only when over-speed occurs in the area of the
Speeding
selected geofence or on the selected route. Otherwise, the rule is not
triggered.

Attribute Value
Number of subscribers in geofences / The number of radio subscribers in selected geofences or on selected
on routes routes.
Select Area (Geofences/ Routes) Select geofences or routes to follow in the rule.
Select this check box to notify the dispatcher about violation of one of
the criteria every time it happens. If the check box is not selected, the
Notify constantly
actions which follow the violation of the specified criteria will occur
only once.
If the subscriber starts moving, and before that the subscriber stopped
Notify about new location for a time period longer than the specified one, the notification window
will be displayed
If the rule meets selected criteria, the system can perform a series of actions:
1. Actions addressed to the initiator
4. Other
If finished, click OK to save the rule, and the created rule appears in the list of rules.
To edit rule settings, select it in the list of rules and click Edit. To remove the rule, select it in the list of rules and
click Delete.
Initiator Alert

Open the Initiator Alert tab.
Man Down if selected and On is clicked, the Man Down mode will be set to the radio that triggered the rule. If
Off is clicked, the Man Down mode of the radio will be deactivated. Performing the rule with this action is followed
with service message recording to the Event Log.
boards using SmartPTT Man Down Configurator, please, refer to SmartPTT Man Down Configuration Guide. To set
Message a text message is sent to the subscriber who initiated triggering of the rule.

Dispatcher Alert
Play Sound select .wav audio file to play back.
Show on Map location of the subscriber specified in the rule is shown on the map (with an icon).
title in the Alert Caption field and the description in the Alert Text field.
Note: For rules Stop control and No location data the alert text cannot be set it is generated by the system
automatically.
Set Subscriber Status the subscriber is assigned the specified status. It is selected from the list of statuses.
Subscriber Alert

Send Message a text message is sent to the selected subscribers, talkgroups or categories.
Other
Open the Other tab.

are not fulfilled. To do this, the following fields are to be filled:
Radioserver server name for e-mail sending. The name of the server is selected from the drop-down list.
E-mail electronic addresses to send the message.
SMS if selected, the SMS message is sent to the specified phone number in case the rules specified earlier are
not fulfilled. To do this, the following fields are to be filled:
Radioserver server name which is configured for SMS messages sending. The name of the server is selected
from the drop-down list.
Phone Numbers telephone numbers to send SMS. The preferred number format is International Number
Note: See information about SmartPTT Radioserver configuration for sending and receiving e-mails and SMS
1.5.25 Lone Worker Rules
SmartPTT Dispatcher supports the Lone Worker mode for radio subscribers.

When a subscriber is set to the Lone Worker mode, SmartPTT automatically tracks the following conditions:
Absence of calls from the subscriber during specified period of time.
Absence of GPS coordinates from the subscriber during specified period of time.
Immobility of the subscriber during specified period of time.
When one of the specified conditions triggers, SmartPTT Dispatcher executes the actions defined by the settings.
To define special rules or profiles for lone workers, expand the Settings menu in the Main Menu bar of the
SmartPTT Dispatcher window and click Lone Worker Rules. At that, the window for creation and/or editing the
rules for lone workers opens.
Here you can see the list of rules which get executed if the specified conditions are fulfilled. SmartPTT supports
multiple rules, so it is possible to create a lone worker rule for each radio subscriber.

To add a new rule, click Add. To make changes in the existing rule, select it and click Edit. To delete a rule,
select it from the list and click Delete.
Note: The default profile cannot be deleted.
At clicking Add or Edit, the Profile Settings window opens.

In the Profile Settings window you can set up rules for a new profile or edit rules for the existing profile. The
window contains the following fields and sections:
Name name of the profile. It is an obligatory field.
The General tab contains rule conditions to trigger an alert:
No calls specifies the period of time for a subscriber to make a voice call. If the subscriber does not make a call
during the specified time period, the corresponding actions are executed.
No location data received specifies the period of time for a subscriber to send GPS or Indoor data. If the
subscriber radio does not send its GPS or Indoor data during the specified time period, the corresponding actions
are executed.
No change in location data specifies the period of time to check if a subscriber is moving. If the subscriber
GPS data (GPS data accuracy is 5 meters) or Indoor data do not change during the specified time period, the
corresponding actions are executed.
Note: The No change in location data rule condition triggers only if the dispatcher receives radio GPS or Indoor
data. So the No change in location data rule condition must be used together with the No location data
received rule condition.
The Tallysman tab allows you to specify rule conditions related to the Tallysman option board.
Note: Make sure that the radio subscriber unit has the built-in Tallysman option board which is configured
properly. Also make sure that Tallysman feature is enabled in SmartPTT Radioserver Configurator.

No heartbeat messages specifies the period of time to receive radio signals for its presence in the network. If
the radio built-in option board does not send information on the radio presence in the network during the specified
time period, the corresponding actions are executed.
The Subscriber Alert area:
Text Message when the event specified in one of the filters occurs, the text message is sent to the lone
worker.
Audio Message when the event specified in one of the filters occurs, an audio message is sent to the lone
worker. To record the message, click the Record button. To stop recording, click the Stop button. To listen to the
recorded message, click Play. To delete the recorded message, click Delete.
Call Alert when the event described by one of the filters occurs, a Call Alert is sent to the lone worker.

The Actions delay timer defines the time interval after which Actions will be executed after Subscriber Alert.
If the rule meets selected criteria, the system can execute the following actions:
1. Actions addressed to the initiator
4. Other
To save the rule, click OK. At that, the created rule appears in the list of rules.
To edit rule settings, select it in the list of rules and click Edit. To remove the rule, select it in the list of rules and
click Delete.
Initiator Alert
Open the Initiator Alert tab.
Man Down if selected and On is clicked, the Man Down mode will be set to the radio that triggered the rule. If
Off is clicked, the Man Down mode of the radio will be deactivated. Performing the rule with this action is followed
with service message recording to the Event Log.

boards using SmartPTT Man Down Configurator, please, refer to SmartPTT Man Down Configuration Guide. To set
Message a text message is sent to the subscriber who triggered the rule.
Dispatcher Alert
Play Sound select the audio file to play in SmartPTT Dispatcher. The supported audio formats: MP3, OGG,
WAV.
Show on Map subscriber specified in the rule is shown on the map (with an icon).
title in the Alert Caption field. and the description in the Alert Text field. Description of the event can't be set, it
is generated automatically.
Set Subscriber Status the subscriber is assigned the specified status. It is selected from the list of statuses.

Subscriber Alert
Send Message a text message is sent to the selected subscribers, talkgroups or categories.
Other
Open the Other tab.

are not fulfilled. To do this, the following fields are to be filled:
Radioserver server name for e-mail sending. The name of the server is selected from the drop-down list.
E-mail electronic addresses to send the message.
SMS if checked, the SMS message is sent to the specified phone number in case the rules specified earlier are
not fulfilled. To do this, the following fields are to be filled:
Radioserver server name for SMS messages sending. The name of the server is selected from the drop-down
list.
Phone Numbers telephone numbers to send SMS. The preferred number format is International Number
Note: See information about SmartPTT Radioserver configuration for sending and receiving e-mails and SMS

How to assign a Lone Worker Profile to the radio subscriber

To assign the created lone worker profile to a radio subscriber, open the Properties window of the subscriber.
In the opened window select the Lone Worker check box, and in the drop-down list select the created profile.
To remove the profile from the subscriber, clear the Lone Worker check box.
1.5.26 Subscriber Custom Properties
SmartPTT Dispatcher provides the ability to add custom properties of a subscriber, which can be used for giving
additional information about the radio subscriber. Subscriber Custom Properties have the following four types:
1. Text
2. Numeric
3. Date
4. List

To create custom properties expand the Settings menu in the Main Menu bar of the SmartPTT Dispatcher
window and click Subscriber Custom Properties. At that, the Subscriber Custom Properties window opens.
The top list contains subscriber custom property groups.
To add the subscriber custom property group, click Add at the top. To delete the group, click Delete. Arrows on
the right allow moving groups inside the list.
The bottom list contains the properties of the created groups.
Property Name custom name of the property which will be displayed in the Properties window.
Type property type (Text, Numeric, Data or List).
Description text description added by the user when creating a property.
Active select the check box, to have the property displayed in the Properties window.

To add a property into the property group, select the created property group in the top list and then click Add
above the bottom list.
At that, the Subscriber property window opens.
Fill all the fields required. Select the Type and click OK.
Note: If you want to select List in the Type field, before that you need to create the list. Otherwise, the list will be
empty.

To create the list, click the Create/Edit Lists button . At that, the window opens:
In the top box add list names by clicking Add.
Select the created list and add elements of the list. To do it, go to the bottom box and click Add just above it.

To view the active custom properties go to the subscriber Properties window, Custom tab.
1.5.27 Custom Consoles
Custom Console is a tool that provides the dispatcher with custom workplace. Custom consoles are visual
panels containing various elements, e.g. radio subscribers, external dispatchers, talkgroups, in short, everything
the dispatcher need for daily work. Every dispatcher can have his own console with all the radio objects necessary
for his work.

To create and set up a custom console, expand the Settings menu in the Main Menu bar of the SmartPTT
Dispatcher window and click Custom Consoles. At that, the Custom Consoles window opens.

To add a new console, click Add. At that, the console editor will open.
Name: A name of a custom console which will be displayed in the Tools menu.
Wallpaper: Allows you to select an image for the background of the console. The supported formats are BMP,
JPG, PNG.
There are more than a dozen types of visual elements available in Custom Consoles. Description of each element
is given further in this article.
To add an element to the custom console, drag and drop the desired element onto the work space of the console
designer. To remove the element from the work space, select it and press Delete. To erase the last change or
perform the redo function click the Undo or Redo buttons.
You can adjust size, color or location of each element on the custom console. You can also add or remove
different properties. To do this, select the element and use the Misc or the Properties sections on the right of the
console designer work space. To move the element up, down, left, or right, press the arrow keys. To move the
element diagonally, press the Up or Down Arrow key and the Left or Right Arrow key. For example, to move the
element diagonally toward the upper-right corner, press Right Arrow-Up Arrow.

Channel
The Channel element stands for a physical or logical channel. It gives the
following information about the channel:
information about the current call on the channel the call state, the called
party and the call originator;
default target for outgoing calls (it can be either All Call or any particular
talkgroup);
muted or unmuted;
the number of missed incoming calls.
To mute the channel, click . Check the Mute Mode settings before applying
this function.
To open the Actions list which can be applied to an element, click .
To display the channel name as Radioserver name Channel name, select the
Radioserver Name check box in the Misc section. Otherwise, only the
channel name will be displayed.
To view the number of missed incoming calls, select the Missed Calls check
box in the Properties section.
shows the number of calls not answered by the dispatcher. The
red figure stands for the number of private calls not answered by the dispatcher.
The blue one shows the total number of calls not answered by the dispatcher,
including private and group calls. As soon as the dispatcher called back the
talkgroup or the radio subscriber, the counter is set to zero.

By clicking the button, the window with details appears.
Missed (Dispatcher) filters only private calls not answered by the dispatcher.
Missed (All) filters private and group calls not answered by the dispatcher.
All removes all filters and shows all available talkgroups and radio subscribers
and their call statistics.
Clear All sets all counters to zero.
Talkgroup
The Talkgroup element stands for a talkgroup on the channel. You can
make a call to the selected talkgroup by clicking on the element.
To open the Actions list which can be applied to an element, click .
Also, the element displays that the radio subscriber enters emergency
mode (the Emergency icon appears), when the Emergency button is
pressed on the radio. Once the dispatcher solves the problem by clicking
in the Emergencies panel, he clears the emergency state on the
element of the Custom Console. Once the initiator clears the emergency
on the initiator radio, the emergency is considered over.
You can mute the group call by clicking on the Mute icon. The element also
shows the state of the current call.

To display the channel name as Radioserver name Channel name, select
the Radioserver Name check box in the Misc section. Otherwise, only the
channel name will be displayed.
Radio Subscribers
The Subscriber element is used for making private voice calls. There are
two types of the Subscriber element:
The Subscriber element for certain radio subscriberis used to call
The Subscriber elem ent for the radio subscriber selected in advance, when adding the element to
certain radio subscriber
the console.
You can also assign this type of element to different radio subscribers
from the drop-down list. To enable this option, select the Allow
Changes check box in the Properties section, when adding the
element to the console.
The Subscriber element for optional radio subscriberis used to call
the radio subscriber that can be selected using dial pad or list of radio
subscribers on the element.
To open the dial pad, click the button in the bottom left corner of
the element. To select the necessary radio subscriber, enter its Radio
ID in the search field using the dial pad or keyboard.
To open the list of radio subscribers, click the button in the bottom
right corner of the element.
The Subscriber elem ent for

The Subscriber element shows the radio subscriber name or its Radio ID,
optional radio subscriber
if name is not specified.
the icon on the subscriber element shows that the dispatcher did not
answer to the subscriber call. The figure next to it shows the number of
missed calls.

Also, the element displays that:
the radio subscriber enters emergency mode (the Emergency label),
when the Emergency button of the radio is pressed.
the radio subscriber enters the Man Down state (the Man Down
label), when the radio tilt changes. For proper operation of this
functionality configure a rule in SmartPTT Dispatcher with Man
Down selected and On clicked in the Initiator Alert area. For
example, a rule of the Rules and Alerts type with the
following parameters:
Note: Make sure that the radio subscriber unit has the built-in option board
which is configured properly for Man Down mode. To set up the Man Down
feature for Motorola generic option board (GOB) or Connect Plus option
boards using SmartPTT Man Down Configurator, please, refer to SmartPTT
Man Down Configuration Guide. To set up Man Down feature for other option
boards including Tallysman option boards, please, refer to the corresponding
manufacturers documentation. You may always contact SmartPTT

Technical Support Center for detailed information on configuring Man Down
feature.
Note: To disable the rule without SmartPTT Dispatcher restart, click Off for
the Man Down option. If the rule is disabled by clicking to clear the Active
check box, SmartPTT Dispatcher restart is required.
To open the Actions List which can be applied to an element, click .
To open the Call Window of the radio subscriber, right click the element.
Telephone Subscriber
The Telephone Subscriber element is used for making calls to telephone
subscribers. Double-clicking on the element opens the Call Window and
initiates the call.
Note: For proper operation of the element select Allow Calls to
Telephone Subscribers in the General Settings tab of the Telephone
Settings window.
You can assign the element to different telephone subscribers from the
drop-down list. To enable this option, select the Allow Changes check box
in the Properties section.
Note: To set the list of telephone subscribers, go to the Telephone
Subscribers window.

Dispatcher
The Dispatcher element is used for making connection to other
dispatchers. Double-clicking on the element opens the dispatcher's Call
Window and initiates the call.
Note: For proper operation of the element make sure that the operator has
the permission Connect with external dispatchers (Settings >
Operators)
You can assign the element to different dispatchers from the drop-down list.
To enable this option, select the Allow Changes check box in the
Properties section.
Note: The list of dispatchers contains dispatchers added in the Dispatchers
window.
Channel Selector
The Channel Selector element allows the dispatcher to switch from one
channel of the control station to another.
Note: The functionality requires the control station to be connected to the
PC and its channels to be set up via MOTOTRBO CPS and SmartPTT
Radioserver Configurator.
Channel setting in SmartPTT Radioserver Configurator is carried out on the
Channels tab of the control station. Channels listed on this tab must
match the channels set in MOTOTRBO CPS (channel number, zone
number).
To configure this functionality in SmartPTT Dispatcher, add the Channel
Selector element into the console designer work space. One element can
be assigned to one channel. To allow switching between channels, you
should add the required number of elements.

Outgoing Telemetry
The Outgoing Telemetry element is used for sending telemetry commands
to the radio subscriber. You can assign only one telemetry command per
element. Before assigning the telemetry command to the element, add it to
the telemetry list of commands and to the radio subscriber. Apart from
sending commands, you can also check the current status and the time of
the last status update.
Incoming Telemetry
The Incoming Telemetry element is used for receiving the current status of
the selected pin. You can also see the time of the last status update.
Voice Notification
The Voice Notifications element starts or stops the voice notification and
displays how many times the voice notification is reproduced. To configure
voice notifications see the Voice Notification section in SmartPTT
Radioserver Configurator.
Note: To monitor the current status of the voice notification playing, open
the Voice Notifications window (Service > Voice Notifications).
To display the element name as Radioserver name Voice Notification
name, select the Radioserver Name check box in the Misc section.
Otherwise, only the voice notification name will be displayed.

Multiselect
The Multiselect element is used to make a simultaneous call to several
radio objects (talkgroups and radio subscribers) which were added in
advance by dispatcher to the Multiselect list.
To initiate a simultaneous call to the participants of the Multiselect list,
click the Multiselect element in the opened custom console. At that, all
participants will hear the dispatcher, but only the dispatcher will hear the
participant who answers the call.
To add radio objects to the Multiselect list, add the Multiselect element to
the custom console in the console editing mode, open the custom console
from the Tools menu and click the Edit list button on . In the Multiselect
window, that opened, add the required radio objects from the Radio Fleet
list to the Multiselect objects list, and click OK.
Note: You can create more than one Multiselect objects list, by adding the
corresponding number of the Multiselect elements to the custom console.
To edit the Multiselect list, click the Edit list button in the opened
custom console.
Broadcast Call
The Broadcast Call element is used for making group calls or an All Call
within all the channels of the dispatch console simultaneously. Select the
required talkgroup or All Call ID in the Talkgroup ID field of the Properties
section. When such a call is initiated, SmartPTT Dispatcher tries to call all
of the subscribers with the given identifier.
Panel
The Panel element is used for uniting several elements. The panel can have
its own color, size and placement. All inside elements of one panel are
moved together with the panel.

Image
The Image element is used for adding logos and other images to the
custom console. You can select the image file under the Properties
section on the right. The supported formats are BMP, JPG, PNG.
Incoming Events
The Incoming Events informs about incoming messages, call alerts and
missed private calls to SmartPTT Dispatcher from radio subscribers.
Double-click the record in the panel to open the subscriber's Call Window.
TMS
The TMS element is used for sending short text messages to all
subscribers or talkgroups situated in one panel with the TMS element. To
do this, just enter the text of the message or select a template, and send
it. If the TMS element is placed outside a panel, it will send private
messages. To do this, just select the radio subscriber, enter the text of the
message and send the message.
PTT
The PTT element is used for a multiple-user call. If it is located inside the
panel, clicking the PTT element makes a call to all the subscribers located
within this panel. If it is located outside the panel, the PTT element
becomes disabled.

When in work, color of the elements with the assigned subscribers differs depending on the status.
Element Description
Gray the subscriber is offline or outside the network coverage
Gray blue the subscriber is online
Light yellow the operator is trying to make an outgoing call
Yellow all outgoing radio calls
Green all incoming radio calls or the radio is being monitored
Blue none of the parties transmit or receive voice. The subscriber can answer the call by
pressing the PTT button within hang time.
After the hang time expires, the subscriber initiates a new call by pressing the PTT button. The
calling subscriber is the subscriber linked with the PTT button by default.
Blue frame the subscriber is selected
You can open the created custom consoles from the Tools menu. SmartPTT Dispatcher allows opening multiple
custom consoles simultaneously.
1.6 Service
The Service menu allows you to carry out secondary functions, namely:
Radio Check allows you to send the radio check command to radio subscribers.
Voice Notifications allows you to play voice notifications.
Deferred Actions allows you to view and edit deferred actions.
Received Files allows you to view files received by the radioserver via SmartPTT File Transfer.
System Information allows you to check event statistics registered on the radioserver or in the dispatcher
console and other information on the system.
Export Radio Subscribers allows you to save the list of registered radio subscribers in XML or XLS formats.

Import Radio Subscribers allows you to import previously exported list of radio subscribers.
Save Dispatcher Settings allows you to save current settings of the dispatcher console and database to
restore them in the future.
Restore Dispatcher Settings allows you to restore saved settings of the dispatcher console and the
database.
1.6.1 Radio Check
The Radio Check function can be executed on the selected control stations available to the dispatcher. The
result of the Radio Check is displayed in the subscriber Call Window. It can be: "Subscriber is available" or
"Subscriber is unavailable".
To do Radio Check, expand the Service menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Radio Check. At that, the Radio Check window opens.
Specify the IP of the subscriber radio. Select control stations which should be used to check the subscriber
availability and click Send.

Alternatively, Radio Check can be done from the Call Window or the Actions List.
In the Actions List:
1.6.2 Voice Notifications
The main purpose of the voice notification functionality is to warn talkgroups about the fire or other emergency and
to manage evacuation. However, in normal mode voice notification can be used for usual voice announcements.
Warning! You can create voice notifications only in SmartPTT Radioserver Configurator (Radioserver >
Add-on Modules > Voice Notifications). You can run the created voice notifications from SmartPTT
Dispatcher.

To play a voice notification in selected systems, expand the Service menu in the Main Menu bar and click
Voice Notifications. At that, the Voice Notifications window will open.
Radioserver select the radioserver from the list. The list contains only active and running radioservers,
registered in the dispatch console .
Voice Notifications select a voice notification from the list of items created in SmartPTT Radioserver
Configurator.
To play the voice notification, select the radioserver and the voice notification, and click Start. To stop playing,
click Stop.
Note: To play a voice notification, you can use the Voice Notification element, added to the custom console.

Note: When the voice notification is stopped, it does not stop playing immediately, but only after it played on all
selected channels within a single repetition.
Notifications Left specifies the number of remaining voice notification repetitions.
Channels contains a list of channels specified for the selected voice notification. Here you can also see the
current status of the voice notification playing, and the number of completed playbacks. The channel is highlighted
green, when voice notification playing was successfully completed on this channel. When voice notification can't
be played on the channel (for example, hardware or virtual device is not available at the moment), the channel is
highlighted red. While voice notification is played on the channel, the channel is highlighted yellow.
1.6.3 Deferred Actions
Deferred actions allow to deliver an information to the offline subscriber. When subscriber becomes online, it will
immediately receive it.
You can use deferred action for the online subscribers. They will receive them immediately after the creation.
SmartPTT Dispatcher allows you to create, edit, view and delete two types of deferred actions:
voice messages,
text messages.
Note: Operator of SmartPTT Dispatcher should have the right to create deferred actions.
You can create a deferred action in two ways:

Double-click the subscriber in the Radio Fleet window and click Create Deferred Action icon in the
subscriber window.

Click the Action button ( ) next to the subscriber and click Create Deferred Action.

At that, the Create Deferred Action window will be opened:
Radioserver: A list of the active radioservers, to which a subscriber belongs.
Send Audio Message: Select to create a voice message:
click Record and start the recording of the voice message. When you do, the button changes to Stop.
Click it to stop the recording.
click Play to play the recorded message. When you do, the button will change to Stop. Click it to stop the
recording.
If you dislike the voice message, you can rewrite it by recording a new voice message.
Send Text Message: Select to create a text message:
type your text message if the field below.
Note: If you unselect Send Text Message, the text will be kept in the field except it becomes unavailable and will
not be included into action when you will save it.
Save: click to save the action. At this, your message will be transmitted to the radioserver, so the execution of
the deferred action is independent on SmartPTT Dispatcher. You will be notified about the successful creation of
the derferred action or issues that resist its creation.
Cancel: click to cancel the creation of the action or adding changes to it.

View Deferred Actions: Closes the Create Deferred Action window without saving and opens the Deferred
Actions list.
In this list you can view deferred actions which were not executed yet (queued actions). When the deferred action
is executed, it will be removed from the list.
Current Radioserver: Select the radioserver to view actions which it should execute.
Note: If you do not see your radioserver in the list, check if it is active in the Radioservers menu.
Load Action List: Click to show or refresh the list of deferred actions on the selected radiosever.
Edit: Click to change the selected action. At this, Create Deferred Action will be opened again.
Delete: Click to delete the selected action. Be careful with this, because no notifications occur at this action.
1.6.4 Received Files
SmartPTT Dispatcher provides the ability to view files sent from radio stations with the help of a free application
SmartPTT File Transfer.

To view the files received from radio stations, expand the Service menu in the Main Menu bar and click
Received Files. At that, the following window opens.
Current Radioserver allows selecting files from one available radioserver or all available radioservers.
Retrieve File List loads received files for the selected radioserver.
Download opens the window for saving the selected file. You can also open this window by double-clicking on
the selected file.
Delete deletes the selected file from the list.
Close closes the Received Files window.
1.6.5 System Information
The System Information window contains brief information about the usage of the SmartPTT network systems.
To call this window click System Information in the Service menu of the Dispatcher main menu.

1.6.6 Export Radio Subscribers
SmartPTT Dispatcher provides the ability to export subscriber list from one SmartPTT Dispatcher and then to
import it into another. Only registered radio subscribers can be exported.
To export the list of radio subscribers, expand the Service menu in the Main Menu bar and click Export Radio
Subscribers. At that, the following window opens.

In the Format area select the format in which you want to export the subscriber list. To select the file for export,
click . Supported file formats: XLS, XML and CSV. Then click OK. At that, the file with the exported data will
open.
The example of the exported file in XLS format:
The example of the exported file in XML format:
ID automatically generated ID of the radio subscriber.
IP Address radio subscriber IP address.
Network ID network ID which is specified in MOTOTRBO Customer Programming Software (see parameter CAI
Network).
Radio ID unique identifier of the radio unit.
Name radio subscriber name specified in the subscriber's Properties window in SmartPTT Dispatcher.

GPS shows whether the radio supports GPS.
MDC ID radio ID in the analog data channel.
Icon path to the icon selected per subscriber. If a radio subscriber has a default icon, the corresponding field in
the export file is empty.
Show on map shows whether the subscriber's location is visible on the map.
Lone Worker shows whether the subscriber is in the "lone worker" mode.
Select 5 ID shows the 5 Tone identifier of the subscriber.
Indoor Support shows whether the subscriber is visible on the building plan by the dispatcher request or after
the predefined time period.
Indoor Request shows whether the option Update Interval for Indoor Tracking is selected.
Indoor Update Interval the time interval in seconds for location data update from special beacons, which are
installed in buildings.
GPS update with time interval shows whether the GPS Update location with time interval option is
selected.
Time Interval shows the time interval in seconds after which the GPS coordinate request will be sent to the
radio subscriber.
GPS update with distance interval shows whether the GPS Update location with distance interval option
is selected.
Distance Interval shows the distance interval in meters or feet after which the GPS coordinate request will be
sent to the radio subscriber.
GPS on GPIO pin status change shows if the GPS coordinate request will be sent to the radio subscriber
when the status of telemetry contacts changed.
GPS on emergency shows if the GPS coordinate request will be sent to the radio subscriber when the radio
subscriber sends an emergency alarm.
Note: The following properties of the subscriber in exported files may have two possible values: "True" or "False"
in XLS and CSV files; "Yes" or "No" in XML files: GPS, Show on map, Lone Worker, Indoor Support, Indoor
Request, GPS update with time interval, GPS update with distance interval, GPS on GPIO pin status
change, GPS on emergency.

1.6.7 Import Radio Subscribers
SmartPTT Dispatcher provides the ability to import subscribers (in XLS, XML and CSV) from one SmartPTT
Dispatcher to another.
To import the list of radio subscribers, expand the Service menu in the Main Menu bar and click Import Radio
Subscribers. At that, the following window opens.
In the Format area select the format in which you want to import the subscriber list. To select the file for import,
click . Then select the import options.
Add New Records when the check box is selected, at importing, new subscribers (not existing in SmartPTT
Dispatcher) will be added to the list of subscribers.
Update Existing Records when the check box is selected, at importing, the existing data on the subscribers in
SmartPTT Dispatcher is replaced with the data from the imported file.
Note: It is possible to select both import options at a time. At that, new records will be added and the existing
records will be updated.
Click OK to launch import process.
Click Cancel to close the window.
Note: To apply changes after importing, it is important to restart SmartPTT Dispatcher.
The formats of the importing files should match the formats of the exported files.

1.6.8 Upload to KML
SmartPTT Dispatcher supports export of the current subscribers' coordinates in KML format. This format is used
in Google Maps/Google Earth systems.
To save subscriber coordinates in KML file format, expand the Service menu in the Main Menu bar of the
SmartPTT Dispatcher window and click Upload to KML. At that, the following window opens.
The interface of the window depends on where you selected to store the KML file to a local folder or to FTP.
Click Local File to keep the uploaded KML file locally.
KML File specify the destination folder and the name of the KML file with the subscriber coordinates.
You can also set up automatic upload. Simply, select the Auto upload time interval check box and enter the
time interval.
When everything is ready click Export to launch the upload process.
You can also store the uploaded file on FTP. To do that, click FTP at the top of the window.

KML File specifies the destination folder and the name of the KML file with the subscriber coordinates on the
FTP server.
Fill in the Login and Password fields if the FTP server requires authentication.
To exit and save the settings, click Close.
To exit without saving the settings, press ESC.
How to display subscribers' coordinates

To view subscriber coordinates from the FTP file:
1. Open the website http://www.google.com.
2. Click on Maps (the page http://maps.google.com/maps?hl=en&tab=wl is displayed).
3. Enter a direct HTTP link to the file located on the FTP server (for example,
http://myserver/smartptt/Radios_smartptt.k ml) in the Google maps field and click Search Maps.
To view subscriber coordinates from the local file in Google Earth:
1. Start Google Earth.
2. Select Open (from the File/Open menu or press CTRL+O).
3. Specify the path to the local file with the subscriber coordinates in KML format and click Open.
How to configure subscribers' coordinates display with automatic update in

Google Earth
1. Start Google Earth.
2. Select the menu command Add/Network Link.
3. In the Name field specify the place mark name to be displayed in Google Earth.
4. To view the file from the FTP server, enter a direct HTTP link to the file located on the FTP server (for
example, http://myserver/smartptt/Radios_smartptt.k ml).
To view the file from the local disk, click Browse, specify the path to the file with subscriber coordinates in KML
format and click Open.
5. Click the Refresh tab, select the Periodically option and set an update interval.
6. Click : SmartPTT subscribers should now be displayed in Google Earth.
7. To open the added KML file automatically the next time Google Earth is run, you should save the temporary
place mark "Subscribers (SmartPTT)" to My Places list. To do this please select the menu command
File/Save/Save to My Places or press CTRL+SHIFT+S.

1.6.9 Save Dispatcher Settings
Starting from version 8.3 you can save and restore not only the event log database, but also the dispatch console
settings. These includes: opened panels, the application interface language and other settings.
To save current settings or database, open the Service menu and select Save Dispatcher Settings. At that, the
following window opens up:
Objects define what you want to save. You can select both, if needed.
Archive File specify the path to the folder where you need the archive to be saved.
To save the selected objects, click Save. To quit the window without saving, click Cancel.
To restore the saved settings and database, see Restore Dispatcher Settings.

1.6.10 Restore Dispatcher Settings
To restore the saved dispatch console settings or database (see how to save the dispatch console settings here),
open the Service menu and select Restore Dispatcher Settings. At that, the following window will open:
Archive File specify the path to the archive folder.
Objects define what you want to restore. You can select more than one option.
Override Dispatcher GUID if selected, SmartPTT Dispatcher globally unique ID is replaced with the imported
value. After importing, there are two dispatch consoles with identical GUIDs. If check box is not selected,
SmartPTT Dispatcher globally unique ID is left unchanged. After importing, there are two dispatch consoles with
same configuration settings, but different globally unique IDs.
To restore the selected objects, click Restore. To quit the window, click Cancel. To apply the restored settings,
restart the application.
1.7 Reports
The Reports menu presents all the reports available in the system:
Report Wizard allows you to build a report on the basis of the Event log.
Radio Activity Report allows you to view the number of all calls and group calls during a defined time period.
Subscriber Location Report is a special report that displays GPS coordinates of the selected radio
subscribers.
Online Subscribers report gives you a list of registered and non-registered subscribers online.

Lone Workers report gives you the information about events that occur when the radio is in the Lone Worker
mode.
1.7.1 Report Wizard
Report Wizard functionality provides flexible report creation based on the information stored in the SmartPTT
Dispatcher Event Log. Using the Report Wizard it is possible to select the necessary fields for the report,
specify grouping and sorting fields, specify filtering criteria. Reports generated by the Report Wizard are exported
to Microsoft Excel.
To use the Report Wizard, expand the Reports menu in the Main Menu bar of the SmartPTT Dispatcher window
and click Report Wizard. At that, the Report Wizard window opens.
1. In the window that opened select the data source of the future report. You can select between the database
of the dispatch console and the database of the radioserver. To be able to select the radioserver's database,
make sure that the radioserver is up and running.
2. Select fields which you want to include in the report and click Next.
3. Define the structure of the report its grouping and sorting.

Note: If both fields are not specified, the report will be grouped and sorted by default.
When ready, click Next.
4. Filter the report by values. Click Next to continue.
5. Specify the file name of the report. To complete the process, click Finish. The report can be saved in HTML,
MHT, XLS, XLSX, CSV, and TXT formats.

1.7.2 Radio Activity
Radio Activity Report gives information about quantity and duration of All Calls and Group Calls with a breakdown
into hours or days.
To create the report, expand the Reports menu and select Radio Activity Report. The Radio Activity Report
window opens.

Period defines the time frame for the report data.
Source defines the source, which database will be used for the report. If Dispatcher is selected, the data is
taken from the local database. Apart from Dispatcher, any available radioserver can be chosen as a data source.
In that case all data is taken from the database of the chosen radioserver.
Channel allows to build a report for a particular channel of for all control stations.
Group by defines the level of detail, whether you want to see the report information divided into days, hours or
minutes.
The report can be saved in PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT, Image or XPS formats.


1.7.3 Subscriber Locations
SmartPTT Dispatcher allows creating a report on subscriber's locations. The report can be saved in PDF, HTML,
MHT, RTF, XLS, XLSX, CSV, TXT, Image or XPS formats.
To create the report, expand the Reports menu in the Main Menu and click Subscriber Locations. At that, the
Subscriber Locations window will open.
Period defines the time frame of the report.
Source defines the source, whose database will be used for the report. If Dispatcher is selected, the data is
taken from the local database. Apart from Dispatcher, any available radioserver can be chosen as a data source.
In that case the data is taken from the database of the chosen radioserver. To build a report based on the
radioserver database, make sure that Event Log is enabled and connected in SmartPTT Radioserver Configurator.
Subscriber defines subscriber for whom the report is to be generated. The list of subscribers is taken from the
current database. When All is selected, the report will be generated for all subscribers which have GPS
coordinates in the database.
Group by subscribers groups data in the report by radio subscribers.
UTC Time if selected, the report time will be converted to UTC format. If UTC Time is not selected, the local
time of the radioserver PC will be shown in the Subscriber Locations report.

RSSI if selected, the signal strength of the received signal (RSSI) is displayed in the report.
Address allows displaying address information based on the received coordinates. The addresses are received
from one of the two services Google Maps or OpenStreetMap. The service is selected in Settings > Positioning
Systems > Address Data Provider. If the Address check box is not selected, there will be a link Find on Map
instead of the address. You can use the link to see the address.
Route defines the route on the basis of which the Subscriber Locations report is to be generated.
Only Key Point displays only the key points of the route in the report.
Click OK to create the report.
In order to set up the format of Latitude, Longitude, Speed and Precision columns of the Subscriber
Location Report, see Positioning Systems, the GPS tab, in SmartPTT Dispatcher.

Note: The Universal Transverse Mercator Coordinate System format is not applicable to this report. If it is
selected, Latitude and Longitude are displayed in Decimal degrees format.
1.7.4 Online Subscribers
SmartPTT allows exporting online subscribers (registered and not registered) in no time by means of the Online
Subscribers report.
To create the report, expand the Reports menu in the Main Menu bar of the SmartPTT Dispatcher window and
click Online Subscribers. At that, the following window opens.
All select this radio button to include all registered and not registered online subscribers in the report.
From ... to ... select this radio button to limit the number of subscribers in the report.
Click OK. At that, the report opens. The report can be exported to PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT,
Image or XPS formats. The report contains three columns: Radio ID, Channel Type and Name. The Channel
Type column can have three values: MOTOTRBO, Analog, Select 5.

1.7.5 Lone Workers
The Lone Workers report provides information about the radio subscriber events when the radio is in the "lone
worker" mode, for example, registration on the network, the incoming or outgoing calls and messages.
To create the report expand the Reports menu in the Main Menu bar of the SmartPTT Dispatcher window and
select Lone Workers. The Lone Workers window opens.
Subscriber defines the subscriber for whom the report is to be generated. The list of subscribers is taken from
the connected database.
Sort By defines the sorting field for the report events. Sorting parameters: direction, event type, date and time,
additional information, operator, control station, subscriber, group, status, duration, repeater IP address, receiver.
The report can be saved in PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT, Image or XPS formats.

1.7.6 Indoor Tracking
The Indoor Tracking report was designed to provide the dispatcher with consolidated information on subscribers'
movements inside buildings, based on beacon data.
To create the report expand the Reports menu and select Indoor Tracking. At that the following window opens.
Radioserver selects the available radioserver, whose database will be used as a data source.
Beacon selects the particular beacon or all beacons.
Subscriber defines the subscriber for whom the report is to be generated. The list of subscribers is taken from
the connected database.

Define the structure of the report by grouping it by beacons or subscribers.
Then click OK to build the report.
Note: Under the high load conditions of a repeater, the report may contain corrupted beacon IDs. To resolve the
problem, it is recommended:
to increase the number of acknowledgments sent from the beacon to the radio. In order to do that, increase
the values ?
in the Beacon Sign On count and the Beacon Sign Off count fields in the K-Term CPS
settings.
in the Indoor Tracking settings of SmartPTT Radioserver Configurator select the Specify list of allowed
beacons check box and specify beacon IDs which data must be processed by SmartPTT Radioserver.
If you find these suggestion does not resolve your issue, send your query to our technical support service.
Note: N/A is displayed in the Beacons column of the report, if a radio subscriber left the coverage area of a
beacon.

1.7.7 Radio Subscribers Movement
The Radio Subscribers Movement report provides information about the radio subscribers movement on the
basis of received GPS data.
To create a report, on the Reports menu click Radio Subscribers Movement. At that, the following window
opens.
Period: Defines the time frame for the report data.
Select radio subscribers: Select the subscribers whose GPS data will be used to build the report.
Select categories: Select the subscribers categories whose GPS data will be used to build the report.
Source: Defines the source, whose database will be used for building the report for selected radio
subscribers or categories. If Dispatcher is selected, the data is taken from the local database. If a radioserver
is selected, the data is taken from the database of the chosen radioserver.
Minimum stop time interval (min): Used to define the time when the subscriber stops. If the subscriber
stays at the same place longer than the specified time interval, the subscriber is supposed to be parked.
Enable points of interest: Select to use the points of interest when building the report.

Note: When Enable points of interest is selected, in the Radio Subscribers Movement report the
Location field will contain only the name of the point of interest.
Radius (m): Specify the allowed distance deviation from the point of interest.
Note: The Radius field is available only if Enable points of interest is selected.
To build the report, click OK. To cancel this action, click Cancel.
After clicking OK, the report opens automatically. The report can be saved in the PDF, HTML, MHT, RTF, XLS,
XLSX, CSV, TXT, Image or XPS formats.
1.8 User Interface Layout
The UI Layout Settings button in the Main Menu bar contains two features:
Locking the layout of the user interface of the dispatch console (for more information see Lock UI Layout)
Customization of the layout of the user interface of the dispatch console:
When working with SmartPTT Dispatcher the operator opens many different windows. Some of them are used
very often. Usually, at every launch of the application all the windows are closed and the operator needs to

spend considerable time to configure the main area. This is quite inconvenient and time-consuming. In order
to avoid this, the operator can save his/her windows configuration at the end of the work day, prior to the
application shutdown, and restore the configuration the next day. There can be more than one window
configuration and the operator can switch between them. To save the current layout of the application user
interface for future use, select Set UI Layout, and then click Add. Enter the name of the user interface
layout. To restore the selected user interface layout, click Apply. To delete the saved user interface layout,
click Delete.
There are two default window configurations, which can't be deleted:
Calls and Event log. It opens Calls, Radio Fleet, Sound and Event Log.
Calls, Channels and Event log. It opens Calls, Radio Fleet, Sound, Channels and Event Log.
1.8.1 Lock UI Layout
Locking user interface layout feature is available only for Administrator account and allows blocking any dispatch
console layout changes for operators. It allows administrator to do specific console customization and prevent
ordinary dispatchers from opening and closing windows and panels.
In order to fix panel positioning, click and then select Lock UI Layout.
When this mode is enabled, the dispatcher can't do the following actions:
Opening and closing panels. Automatic pop-up panels, such as Notifications and System messages, do
not open either.
Changing panel location (see Changing Layout).
Switching user interface layouts .
Changing the size of the opened panels.
Changing the content of the Radio Fleet panel.
Note: If the Event Log is opened when the user interface layout is locked, all the features designed for the Event
Log management are available to the dispatcher.

1.9 Bridging
SmartPTT Bridging service allows joining multiple network systems into a single radio network. The bridging
service is implemented by SmartPTT Radioserver and provides intelligent means of patching for voice and data
streams between various network systems.
In SmartPTT Basic the bridging service allows you to bridge group calls only.
Radio network configurations supporting bridging:
1. Digital conventional channels. Private calls or data can't be bridged in networks based on control stations.
2. Analog conventional channels. Private calls can't be bridged in networks based on control stations.
How to Configure Bridging in SmartPTT Dispatcher Console

You can configure bridging settings in the call bridging table in SmartPTT Dispatcher. The main idea of the
configuration process is to manage bridging with the help of the so-called "Profiles" and "Route Groups". The
profiles contain information on the bridging rules, which are specified in route groups and further in routes. So,
there are three levels:
1. Routes
2. Route Groups
3. Profiles
Route a basic unit of the bridging process and an integral part of the route group, that is a route cannot be used
separately. It is in the route where you define the source and the destination networks, and other main
characteristics of the route.
Route Group group which unites several routes. It was designed to provide a neat look to profiles. Route groups
can be easily activated and deactivated, which will either make routes inside route groups usable or not usable.
Profile saved template of route groups. Profiles can be created for various business fields, for example, there
can be profiles for general purposes, for carrying out engineering work or for emergency situations, etc.

You can configure bridging settings individually for each radioserver from SmartPTT Dispatcher. To open the call
bridging table, open the Actions List by clicking the button next to the radioserver and select Configure
Call Bridging Table.
At that, the Bridging Configuration window opens.
This is the main window from where you can create routes, route groups and add them to new profiles. The
window also informs about the name of the current radioserver, its current profile, the list of available routes
organized in groups.
Show Details displays details of the route groups. You can also check the details of a particular route group by
clicking a plus sign next to the route group name.

Hide Details displays only route group names and the Active check box.
By default, the bridging table displays only active route groups, which belong to the selected profile. To display all
route groups, select the All option.
The buttons Change Profile, Save, Save As allow you to create a new profile or edit the existing one.
The buttons Add Group, Edit Group, Delete Group allow creating new route groups and attach routes to
groups.

1. Profiles
Profiles are used for quick switching between predefined bridging tables.
To add, modify or delete a profile, click Change Profile in the Bridging Configuration window.
If No Profile is selected, the created groups have no reference to a specific profile. The profile list and buttons for
profile edition are not available in the Bridging Profiles window.
If Select Profile is enabled, the profile list is available for editing and route groups can be assigned to the
selected profile.
In the Bridging Profiles window, click Add to create a new bridging profile. At that, the Enter Profile Name
window opens. Use the Profile Name field to specify the profile name, click OK.
Left-click on the profile name in the Bridging Profiles window and click OK.

In the list of groups, select Active check boxes near the route groups that should apply to the chosen profile.
As you finished editing the profile settings, click Apply to activate the current profile settings. At that, the asterisk
character ("*") appears in front of the profile name.
Click Save to save the profile settings.

To switch the profile, click Change Profile in the Bridging Configuration window, select a profile from the list
and click OK. The Bridging Configuration window displays settings of the selected profile active route groups.
Save As allows you to save a copy of the current profile with a new name.
2. Route Groups
To create a new bridging route group and add routes to it, click Add Group in the Bridging Configuration
window.
In the Route Group window, specify name of the route group, add routes to the group and click OK.

To save the changes in the route groups, click Apply.
Add routes to the group by clicking Add Route in the Route Group window. At that, the window for adding routes
opens up.
This is the window where you create routes. Here you can define the source and the target networks, route
direction (one-way or two-way), the source talkgroup and the target talkgroup. You can also select the Route
Type, which depends on the data type you want to patch.
Here you can find a detailed description how to configure routes of different types.
2.1. Configuring "All" Route Type

If you need to patch all voice and data packets from the source network to the destination network, select All in
the Route Type.
In this case you need to fill in the following fields:
Route Number ordinal number of the route.
Source Control Station select any of the added control stations serving as a source. You can add control
stations of various networks in SmartPTT Radioserver Configurator.
Destination Control Station select any of the added control stations serving as a destination. You can add
control stations of various networks in SmartPTT Radioserver Configurator.
Direction allows you to select either one-way or two-way.

Process Routed Calls if selected the call which is already routed once (by one route) also can be routed
another time by another route. It takes place only when several routes are added.
Warning! Please dont use round routes. They can cycle all routes and lead to unstable system
operation.
2.2. Configuring "Talkgroup" Route Type

In order to patch a group call, select Talkgroup in the Route Type. Specify the source and the destination
networks, and other parameters as if you were configuring the "All" Route Type.
The only difference is that for this route type you need to specify the groups' IDs, that is the source talkgroup ID in
the Source field and the destination talkgroup ID in the Target field. For All Call, use "0" as Source ID or Target
ID.
2.3. Configuring "Subscriber" Route Type
Note: This route type is not supported in SmartPTT Basic, since private calls can't be bridged in control station
networks.
To patch individual calls or text messages, select Subscriber in the Route Type field.
Specify the source and the destination networks, and other parameters as if you were configuring any of the
previous route types.

In the Source field specify the subscriber radio ID from the source network. The Target field will be populated
automatically. In this case, all the subscribers from the destination network (see Destination Control Station)
will be able to call to radio subscriber 123 and v.v.
2.4. Configuring "Dynamic" Route Type
Note: This route type is not supported in SmartPTT Basic, since private calls can't be bridged in control station
networks.
To patch private voice calls or text messages of the subscribers from the Subscriber Groups, select Dynamic in
the Route Type field.
In the Subscriber Group select a group, which was added in Subscriber Group of SmartPTT Radioserver
Configurator.
Once created, the routes will display in the Route Group window. Here is the example of the route group
containing routes of three types (All, Group, Subscriber).
Activating Bridging Service

To activate Bridging Service:
1. Run SmartPTT Radioserver Configurator,
2. Click Bridging,
3. Select Active,
4. Save changes and restart the SmartPTT Radioserver.
1.10 Conference Calls

The Conference Call is a type of call in which the dispatcher can have more than one subscriber of different
types at a time. At that, all the participants of the conference call can hear and talk to each other.
SmartPTT Dispatcher allows the dispatcher to organize conference calls and to connect the following subscriber
types:
Telephone subscribers
Other dispatchers using SmartPTT Dispatcher
Radio subscribers
Talkgroups

Note: To be able to make conference calls, the dispatcher must have the permission Make conference calls.
To organize a conference call, click the Conference Call button in the Main Menu bar of SmartPTT
Dispatcher.
At that, the Conference Call window will appear.
To add a subscriber to the conference call, unfold the the necessary section and double-click on the subscriber,
or use drag-and-drop.
The button turns off the sound of the conference call. At that, the dispatcher's microphone is turned off
automatically. So the operator does not hear the conference call participants, and the participants cannot hear the
dispatcher.
The button turns off the operator's microphone.
Stop: Click the button to end the current conference call. Should the radio subscriber make a call right after the
conference call, it is necessary for him or her to wait for a special tone notifying about the end of the call. If the
radio subscriber presses the PTT button before this tone, an incorrect phone call will be initiated.

Starting from version 8.6 you can hold conference calls with radio and telephone subscribers without enabling
Telephone Interconnect in SmartPTT Radioserver Configurator. For more information on how to do it, see help of
SmartPTT Radioserver Configurator (Telephone Calls).
To finish the ongoing conference call with one of the participants, click the button next to the participant.
There is another way how to organize a conference call.
1. In order to invite an external dispatcher or a telephone subscriber, click the buttons or
respectively. In the windows that opened select a dispatcher or a telephone subscriber, and click

Dispatcher:
Note: Only dispatchers from the Dispatcher List with status Active can be invited into the conference call.

2. Use Actions List to make a conference call. At that, the Conference Call window appears and the call
is initiated.
1.11 Help
The Help menu includes:
Help. Here you can find useful information on the system objects and functionality. You can also open the
SmartPTT Help file any time by pressing F1.
About. It contains information on the application version, license, and the third-party software used in
development process.

Check for Updates.
1.12 Remote Assistance

SmartPTT contains Remote Assistance program which provides the remote access to your computer for
SmartPTT technical support engineer. Using this program he can resolve technical issues on your computer.
To use Remote Assistance program:
1. Run Remote Assistance program from the Start menu.
2. Contact technical support engineer and pass your ID and password to it.
3. When the connection is established, you will see session window on the screen.
4. Chat function can be used for communication with the engineer.
5. To stop the session, click Close .

SmartPTT Basic Dispatcher User Guide

Uploaded by

Copyright:

Available Formats

SmartPTT Basic Dispatcher User Guide

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SmartPTT Basic Dispatcher User Guide

Uploaded by

Copyright:

Available Formats

Version 9.

1.1 SmartPTT Dispatcher Interface 4

SmartPTT Basic 9.1 Dispatcher User Guide

SmartPTT Basic 9.1 Dispatcher User Guide

1.5.26 Subscriber Custom Properties 196

SmartPTT Basic 9.1 Dispatcher User Guide

SmartPTT Dispatcher interface can be divided into the following sections:

1. Main Menu which also contains Quick Launch Buttons.

available in the application.

SmartPTT Basic 9.1 Dispatcher User Guide

For more information about this function see Conference Calls.

make calls to telephone subscribers from SmartPTT Dispatcher.

dispatchers from SmartPTT Dispatcher.

There are also other menu items represented by an icon:

check for updates.

when operating in the application.

SmartPTT Basic 9.1 Dispatcher User Guide

which notifies about the approaching license expiration date.

1.1.1 Change Layout

The table displays description of the icons.

SmartPTT Basic 9.1 Dispatcher User Guide

the Main area outside any other panel.

Polish Format Maps

registration key (HASP) and INGIT vector maps are required.

SmartPTT Basic 9.1 Dispatcher User Guide

purchase conditions on the INGIT company website (http://www.ingit.ru).

GWX ActiveX Control Installation

2. Click Proceed with the installation of GWX Active-X Control.

3. Select GWX-6.1 ActiveX Control Installation.

4. In the license agreement window, click I Agree.

and follow the instructions provided.

SmartPTT Basic 9.1 Dispatcher User Guide

local drive and name it GWX61.

ActiveX Control check box is selected.

8. Once the installation is over, run Register GWX ActiveX Control.

SmartPTT Basic 9.1 Dispatcher User Guide

Affects the detail level of the displayed map.

zoomed in or out beyond the specified scale.

SmartPTT Basic 9.1 Dispatcher User Guide

using the TatukGIS Viewer free version (http://www.tatukgis.com/Products/EditorViewer/Editions/Viewer.aspx).

Open Street Map

> Open Online Map.

Europe or North America version depends on required target coverage area.

counties, states are shown.

SmartPTT Basic 9.1 Dispatcher User Guide

the map file in a PTM or PTT format.

How to Use Maps

(this is applicable to the offline map).

"+" and "-" to zoom in and zoom out.

object address will be shown.

the context menu appears.

Using this menu you can:

1. Search on the map

2. Select elements to be labeled on the map.

3. Change the maps appearance.

4. Select the map's rendering type.

SmartPTT Basic 9.1 Dispatcher User Guide

1.2.1 Raster Map

SmartPTT Basic 9.1 Dispatcher User Guide