Atlantis 250: Owner's Manual

ATLANTIS 250
Owners Manual
Atlantis 250CE.indd 1 30/8/07 4:03:41 PM

Contents
Controls and Indicators...................................................................... 2
LCD display....................................................................................... 3
Warning!............................................................................................... 4
Ni-MH Battery Pack Warning............................................................. 4
Introduction ........................................................................................ 5
Features ........................................................................................... 5
Technical Support and Service . ....................................................... 6
Included in Your Package . ................................................................ 7
Getting Started ................................................................................... 8
Mounting the Cradle ......................................................................... 8
Attaching the Antenna ...................................................................... 8
Attaching the Rechargeable Battery Pack . ...................................... 8
Using the Alkaline Battery Case ....................................................... 9
Attaching the Beltclip ........................................................................ 9
Charging the Battery Pack . ............................................................ 10
Operation .......................................................................................... 11
Turning On the Unit and Setting Squelch ....................................... 11
Selecting a Channel ....................................................................... 12
One-touch Channel 16/9................................................................. 12
Triple Watch ................................................................................... 13
Programming a Channel into Memory ............................................ 14
Deleting a Channel from Memory ................................................... 15
Scanning . ....................................................................................... 15
Transmitting .................................................................................... 16
Lighted Keys and Display ............................................................... 16
Turning and reactivating the Key Beep .......................................... 16
Battery Indicator ............................................................................. 17
Key Lock ......................................................................................... 17
Marine Channels - International....................................................... 18
Optional Parts and Replacement Accessories .............................. 20
Specifications ................................................................................... 21
Troubleshooting ............................................................................... 22
Warranty............................................................................................. 23

Controls and Indicators
1
11
12
13
2
6
14
3 7 15
8 LOC K TRI MEM SCAN 16
9 1/5W 16/9 17
18
4 10 MIC
19
20
1 Antenna
2 Belt Clip
3 Adaptor Jack
4 Battery
5 Battery Release Clip
6 PTT (Push to Talk) Key
7 Triple Watch Button (TRI)
8 Lock Button (LOCK)
9 TX Power Button (1/5W)
10 Microphone
11 Speaker MIC (Optional) Jack
12 Volume/Power Knob (VOL)
13 Squelch Knob (SQ)
14 LCD Display
15 Memory Button (MEM)
16 Scan Button (SCAN)
17 Channel Up Button (s)
18 16/9 Button (16/9)
19 Channel Down Button (t)
20 Speaker
2

LCD Display
A B C
D E
G H
A Transmit Indicator
B TX Power Indicator
C Channel Number Display
D Memory Indicator
E Scan Indicator
F Battery Indicator
G Triple Watch Indicator
H Key Lock Indicator

Warning!
The ATLANTIS 250 is splashproof only when the antenna, rub-
ber caps (adaptor jack and speaker mic jack) and the battery are
properly attached.
Do not operate the transmitter of any radio equipment unless all
the Radio Frequency (RF) connectors are secure and any open
connectors are properly terminated.
Do not operate the transmitter of any radio equipment near
electrical blasting caps or in an explosive atmosphere.
Do not let children operate any transmitter-equipped radio
equipment without proper supervision.
Have your radio equipment serviced by a qualified technician.
Do not operate the transmitter of any radio equipment with the
antenna touching or close to the eyes, face, or exposed body
parts.
Ni-MH Battery Pack Warning

This equipment contains a Ni-MH Battery Pack.
The Ni-MH Battery Pack contained in this equipment may
explode if disposed of in a fire.
Do not short-circuit the Battery Pack.
Do not charge the Ni-MH Battery Pack used in this
equipment with any Adaptor other than the one designed to
charge this Battery Pack. Using another Adaptor may damage
the Battery Pack or cause the Battery Pack to explode.
Ni-MH batteries must be disposed of properly.
The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.

Introduction
The ATLANTIS 250 is a splashproof, portable two-way VHF trans-
ceiver. It is compact, lightweight, rugged and fits easily in your
hand.
This handheld VHF marine radio will give you consistent, outstand-
ing performance in virtually all conditions and situations.
To ensure that you get the most from the ATLANTIS 250s fea-
tures, please read this operating guide carefully before using the
unit.
Features
Splashproof (meets JIS4 splashproof specifications)
Triple Watch Mode
Programmable Memory
One-Touch Channel 16/9
Memory Scan
Table-Top Cradle (can also be wall-mounted)
Rechargeable Ni-MH Battery Pack
Battery Save Operation
Key Lock
Back-Lit Keys and Display
Belt Clip
Wrist Strap
TX Power 1W/5W
Alkaline Battery Case (Alkaline batteries are not included)

Technical Support and Service
Your Uniden dealer can provide you with sales assistance and
information. If your marine radio does not perform properly, follow
the troubleshooting tips in the back of this operating guide.
The radio contains no user-serviceable parts. Unauthorized
adjustment will cause illegal radio operation.
Be sure that a qualified technician services your radio equipment.
Caution: Changes or modifications to this product not expressly

approved by Uniden, or operation of this product in any way
other than as detailed by this Operating Guide, can void your
authority to operate this product.

Included in Your Package
ATLANTIS 250 AC Adaptor Antenna
DC Adaptor Cradle Rechargeable Battery
Beltclip Wrist Strap Mounting Screws
Owner's Manual/ Alkaline Battery Case

Printed Material (attached to the ATLANTIS 250)

Getting Started
Mounting the Cradle

Mount the Cradle to either a counter or wall.
To counter:
Attach the Cradle using the mounting screws and wash-
ers as follows.
To wall:
Apply the Cradle to the wall and insert
the two mounting screws into the larger
holes of the Cradle
Push down the Cradle until it is firmly seated.
When you remove the Cradle from the wall, loosen

the screws and push the Cradle up.
Attaching the Antenna

Apply the antenna to the radio as
shown. Be sure the antenna is firmly seated.
Attaching the Rechargeable Battery Pack

1 Snap the battery release clip out and
remove the alkaline battery case.
Then place the rechargeable battery
pack onto the back of the radio. It will
only fit in one way.
Contacts
2 Snap the battery release clip until it
clicks. Be sure the battery pack fits
tightly against the body.

Using the Alkaline Battery Case
When needed, you can use the battery case with AA Alkaline bat-
teries (not included) instead of the rechargeable battery pack.
To install the batteries:
1 Remove the battery case cover by pulling
the 2 halves apart applying your fingers to
the projections.
2 Install 6 AA Alkaline batteries
(not included) into the battery case.
Be certain to follow the + and - symbols
AA
AA
in the compartment.
AA
AA
AA
AA
3 Replace the battery case cover as follows
until it clicks into place.
Attaching the Beltclip
1 Hold the beltclip in the direction as

illustrated.
2 Apply it to the hanger piece on the back of

the radio. Then slide it up.
3 When you hear a click, the beltclip is firmly

attached.
4 To take the beltclip off the radio, turn it

upside down and slide it up.

Charging the Battery Pack
Your marine radio is powered by a specially designed Ni-MH bat-
tery pack.
Before operating the ATLANTIS 250, charge the Ni-MH battery
pack for 16 hours without interruption with the Adaptor.
1 Place the ATLANTIS 250 in

the Cradle.
Make sure your radio is OFF.
2 Plug one end of the AC adaptor into the wall

outlet and the other end into the Adaptor jack
on the back of the ATLANTIS 250.
3 Charge the battery for 16 hours.
The charger will not overcharge the battery pack. After 16 hours
without interruption, charging is completed.
Be sure to replace the rubber cap after charging in order to
secure the splashproof seal.
The radio will not charge the battery while on and receiving
incoming voice traffic.
When you mount the Cradle on your boat, use the DC adaptor
instead.
The jack is for charging only. If the battery level is low, the radio
needs to be charged before use.
10

Operation
See Controls and Indicators (page 2) for button, knob, and key
positions.
When you turn On your ATLANTIS 250 just after purchasing, it is
automatically tuned to channel 16 frequency for distress, safety,
and calling.
When you press any button (except PTT and LOCK key), a short
tone sounds.
Turning On the Unit and Setting Squelch

1 Before you turn On the unit, turn the squelch SPKR
(SQ) knob fully counterclockwise. MIC
SQ VOL
2 Then, turn On the unit by turning the Volume/

Power (VOL) knob clockwise until you
hear a hissing sound.
3 Turn the SQ knob clockwise, just until the

hissing sound stops. Use the knob to adjust Strong Signals
to the desired squelch level. Think of the Medium Signals
squelch control as a frequency gate which
Weak Signals
controls access to weak or strong signals
depending on its setting. Noise
To listen to a weak or distant station, turn

the knob counterclockwise. If reception is poor, turn it clockwise
to cut out weak transmissions.
If the squelch control is adjusted so that you continually hear a
hissing sound, the unit will not scan properly.
4 To turn Off the unit, turn the VOL knob counterclockwise until it
clicks.
11

Selecting a Channel
1 Turn On your ATLANTIS 250.
[UP ]
2 To select a higher channel,
press the s button.
3 To select a lower channel, [DOWN ]

press the t button.
To change the channel continuously,
press and hold the s or t button for
more than 1 second.
One-touch Channel 16/9

Example: While you are monitoring channel 20, you want to check
channel 16 or channel 9.
1 You are now on channel 20.
2 To monitor channel 16, press the 16/9

button.
3 To monitor channel 9, press the 16/9

button again.
4 To return to channel 20, press the 16/9

button again.
12

Triple Watch
Triple Watch mode monitors channels 16 and 9 for a signal while
you listen to the currently selected channel. The marine radio
checks channel 16 and 9 for activity every 2 seconds.
1 To select Triple Watch mode, press the

TRI button. TRIPLE appears on the dis-
play.
2 To exit from Triple Watch, press the TRI

button. TRIPLE disappears.
While in Triple Watch mode, you can
change the currently selected channel
using the s or t button.
13

Programming a Channel into Memory
Before using the scanning feature, you have to program channels
into memory.
1 Select the channel to enter into memory

by pressing the s or t button.
2 Press the MEM button for two seconds to

store the channel. MEM appears on the
display.
3 Press shortly and successively the MEM

button to move into the memorized channels.
14

Deleting a Channel from Memory
1 Select the channel to delete from
memory by pressing the s or t button.
2 Press the MEM button for two secons.

MEM disappears from the display.
Scanning
1 To begin scanning the programmed
channels, press the SCAN button. SCAN
and TRIPLE appear on the display.
2 To stop scanning, press the SCAN

button once more. SCAN and TRIPLE dis-
appear from the display.
Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 2 second
delay period.
When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press TRI button. TRIPLE disappears from the
display.
15

Transmitting
1 Transmission power can be set to either
5W or 1W.
Press the 1/5W button to make the
change, then the 5W or the 1W indicator
on the display changes accordingly.
2 To transmit, press and hold the PTT (push-

to-talk) key.
TX appears on the display.
3 To return to receive, release the PTT key.

TX disappears from the display.
If the PTT key is pressed for more than 5 minutes, TX starts
blinking and the transmission ends. The TX time out tone will
sound until the PTT key is released.
If the battery indicator drops to the blinking 1-mark level on the
display and the PTT key is pressed, the radio will not transmit
and the TX icon starts blinking. (Refer to the description of the
Battery Indicator on the next page.)
Lighted Keys and Display

To light the display, press any key excluding the PTT key.
If you press any button other than the PTT key while the display
and keypad are illuminated, it remains illuminated for another
5 seconds.
Turning and reactivating the Key Beep

Your radio emits a beep each time one of the buttons (except for
the PTT and LOCK key) is pressed.
To turn off or reactivate the Key beep:

Turn the radio on again while pressing and holding the s or t but-
tons.
16

Battery Indicator
When the unit is On, battery power is always indicated on the
display.
When the battery is fully charged, the battery

indicator appears as follows:
When the battery is nearly discharged, the

battery indicator appears as follows:
When the battery indicator drops to the

blinking 1-mark level on the display, the
radio will receive but will not transmit.
Key Lock
To prevent accidental entries, you can lock the keypad.
1 Press and hold the LOCK button for 2 seconds. A double confir-
mation tone sounds. LOCK appears on the display.
2 To unlock the keypad, press and hold the LOCK button again for
2 seconds. A double confirmation tone sounds. LOCK disap-
pears from the display.
You can also unlock the keypad by turning the radio Off and
then On again.
17

Marine Channels - International
Channel Frequency (MHz) Ship to Ship to Permanent
Traffic Type
Desig Transmit Receive Ship Shore Scan List
01 156.050 160.650 Duplex Yes Yes
02 156.100 160.700 Duplex Yes Yes
03 156.150 160.750 Duplex Yes Yes
04 156.200 160.800 Duplex Yes Yes
05 156.250 160.850 Duplex Yes Yes
06 156.300 156.300 Yes No
07 156.350 160.950 Duplex Yes Yes
08 156.400 156.400 Yes No
09 156.450 156.450 Yes Yes
10 156.500 156.500 Yes Yes
11 156.550 156.550 Yes Yes
12 156.600 156.600 No Yes
13 156.650 156.650 Yes Yes
14 156.700 156.700 Yes Yes
15 156.750 156.750 Yes Yes
16 156.800 156.800 Yes Yes
17 156.850 156.850 Yes Yes
18 156.900 161.500 Duplex Yes Yes
19 156.950 161.550 Duplex No Yes
20 157.000 161.600 Duplex No Yes
21 157.050 161.650 Duplex No Yes
22 157.100 161.700 Duplex No Yes
23 157.150 161.750 Duplex No Yes
24 157.200 161.800 Duplex No Yes
25 157.250 161.850 Duplex No Yes
26 157.300 161.900 Duplex No Yes
27 157.350 161.950 Duplex No Yes
28 157.400 162.000 Duplex No Yes
60 156.025 160.625 Duplex
61 156.075 160.675 Duplex
62 156.125 160.725 Duplex
63 156.175 160.775 Duplex
64 156.225 160.825 Duplex
18

Channel Frequency (MHz) Ship to Ship to Permanent
Traffic Type
Desig Transmit Receive Ship Shore Scan List
65 156.275 160.875 Duplex Yes Yes
66 156.325 160.925 Duplex Yes Yes
67 156.375 156.375 Yes No
68 156.425 156.425 Yes Yes
69 156.475 156.475 Yes Yes
70 RX Only 156.525
71 156.575 156.575 Yes Yes
72 156.625 156.625 Yes No
73 156.675 156.675 Yes Yes
74 156.725 156.725 Yes Yes
75 156.775 156.775 Yes No
76 156.825 156.825 Yes No
77 156.875 156.875 Yes No
78 156.925 161.525 Duplex Yes Yes
79 156.975 161.575 Duplex Yes Yes
80 157.025 161.625 Duplex Yes Yes
81 157.075 161.675 Duplex Yes Yes
82 157.125 161.725 Duplex Yes Yes
83 157.175 161.775 Duplex Yes Yes
84 157.225 161.825 Duplex Yes Yes
85 157.275 161.875 Duplex No Yes
86 157.325 161.925 Duplex No Yes
87 157.375 157.375 No Yes
88 157.425 157.425 Yes No
19

Optional Parts and Replacement Accessories
AC Adaptor Mounting Screws Antenna Wrist Strap
DC Adaptor Ni-MH Battery Cradle
Alkaline Battery Case Beltclip
20

Specifications
General
Freq. Control PLL
Freq. Tol. Transmit 1.5 PPM (at 25qC)
Receive 1.5 PPM (at 25qC)
Oper. Temp. D15qC to +55qC
Antenna Flexible Whip
Microphone Built-in Electret type
Display Liquid Crystal Display
Speaker 80 W, 1 Watt
Power Source Rechargeable Ni-MH Battery Pack
7.2V 1350 mAh
Size (without antenna) 5.8 (H) x 2.7 (W) x 1.68 (D) inch
144 (H) x 67 (W) x 42 (D) mm
Weight (w/battery & antenna) 15.2 oz (430g)
Transmitter
Frequency Range 156~158 MHz
Frequency Stability 10 PPM
Power Output 1.0 W & 5W
Spurious Emissions 0.03 W
Current Drain 700mA (1W), 1300mA (5W)
Receiver
Receiver Type Double Conversion Super
Heterodyne Phase
Locked Loop system for Local Oscillator
Frequency Range 156~163 MHz
Sensitivity (20 dB SINAD) -3 dBV (emf)
Squelch Sensitivity Tight 1V
Audio 6 dB 500 to 2000Hz
Frequency Response
Adjacent Channel 70 dB @ 25 kHz
Selectivity
Audio Output Power 0.4 W @ 10 % THD
Current Drain Squelched 40mA
Max. Audio 160mA
Specifications shown are typical and subject to change without notice.
21

Troubleshooting
Not enough range
Cause: Line of sight blocked
Increase antenna height.
Will not transmit on 5 watt range but will transmit on the 1 watt
range.
Cause: Low voltage
Recharge or replace the batteries.
Will not transmit while charging.

Cause: Low voltage
T
he radio is not designed to transmit while charging.
DC or AC adaptor does not supply enough power for
transmitting.
Battery will not charge.

Cause: Low voltage
Do not to transmit while charging. The adaptor does
not supply enough power for transmitting.
22

Warranty
UNIDEN ATLANTIS 250 MARINE RADIO
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty service.

Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498
Uniden New Zealand Limited
Warranty only available in original country of purchase.
ELEMENT OF WARRANTY:
Uniden warrants to the original retail owner for the duration of this warranty, its Atlantis 250
(herein after referred to as the Product), to be free from defects in materials and craftsmanship
with only the limitations or exclusions set out below.
WARRANTY DURATION:
This warranty to the original retail owner only, shall terminate and be of no further effect ONE
(1) year after the date of original retail sale. This warranty will be deemed invalid if the Product
is;
(A) Damaged or not maintained as reasonable and necessary,
(B) Modified, altered or used as part of any conversion kits, subassemblies, or any configura-
tions not sold by Uniden,
(C) Improperly installed,
(D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or mal-
function covered by this warranty,
(E) Used in conjunction with any equipment or parts or as part of a system not manufactured by
Uniden, or
(F) Where the Serial Number label of the product has been removed or damaged beyond rec-
ognition.
Warranty only valid in the country of original retail/sale.
PARTS COVERED:
This warranty covers for one (1) year, the Product and included accessories.
STATEMENT OF REMEDY:
In the event that the Product does not conform to this warranty at any time while this warranty is
in effect, the warrantor at its discretion, will repair the defect or replace the Product and return it
to you without charge for parts or service. This warranty does not provide for reimbursement or
payment of incidental or consequential damages.
This EXPRESS WARRANTY is in addition to and does not in any way affect your rights under
the TRADE PRACTICES ACT 1974 (Cth) (Australia) or the CONSUMER GUARANTEES ACT
(New Zealand).
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY:

In the event that the Product does not conform to this warranty, the Product should be shipped
or delivered, freight pre-paid, with evidence of original purchase (e.g. a copy of the sales
docket), to the warrantor at:
UNIDEN AUSTRALIA PTY LIMITED UNIDEN NEW ZEALAND LIMITED

SERVICE DIVISION SERVICE DIVISION
345 Princes Highway, Rockdale NSW 2216 150 Harris Road, East Tamaki, Auckland
Fax (02) 9599 3278 Fax (09) 274 4253
www.uniden.com.au www.uniden.co.nz
23

Memo:

Memo:

2007 Uniden Australia Pty Limited, Uniden New Zealand Limited.
Printed in China.
UTZZ01620ZC(0)

Atlantis 250: Owner's Manual

Uploaded by

Copyright:

Available Formats

Atlantis 250: Owner's Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Atlantis 250: Owner's Manual

Uploaded by

Copyright:

Available Formats

ATLANTIS 250

Atlantis 250CE.indd 1 30/8/07 4:03:41 PM

Atlantis 250CE.indd 1 30/8/07 4:03:42 PM

Atlantis 250CE.indd 2 30/8/07 4:03:59 PM

Atlantis 250CE.indd 3 30/8/07 4:04:00 PM

Ni-MH Battery Pack Warning

The exclamation point within an equilateral triangle is intended

Atlantis 250CE.indd 4 30/8/07 4:04:00 PM

Atlantis 250CE.indd 5 30/8/07 4:04:01 PM

Caution: Changes or modifications to this product not expressly

Atlantis 250CE.indd 6 30/8/07 4:04:01 PM

ATLANTIS 250 AC Adaptor Antenna

DC Adaptor Cradle Rechargeable Battery

Beltclip Wrist Strap Mounting Screws

Owner's Manual/ Alkaline Battery Case

Atlantis 250CE.indd 7 30/8/07 4:04:02 PM

Mounting the Cradle

Push down the Cradle until it is firmly seated.

When you remove the Cradle from the wall, loosen

Attaching the Antenna

Attaching the Rechargeable Battery Pack

Atlantis 250CE.indd 8 30/8/07 4:04:04 PM

Attaching the Beltclip

1 Hold the beltclip in the direction as

2 Apply it to the hanger piece on the back of

3 When you hear a click, the beltclip is firmly

4 To take the beltclip off the radio, turn it

Atlantis 250CE.indd 9 30/8/07 4:04:08 PM

1 Place the ATLANTIS 250 in

2 Plug one end of the AC adaptor into the wall

3 Charge the battery for 16 hours.

Atlantis 250CE.indd 10 30/8/07 4:04:09 PM

Turning On the Unit and Setting Squelch

2 Then, turn On the unit by turning the Volume/

3 Turn the SQ knob clockwise, just until the

To listen to a weak or distant station, turn

Atlantis 250CE.indd 11 30/8/07 4:04:11 PM

3 To select a lower channel, [DOWN ]

One-touch Channel 16/9

1 You are now on channel 20.

2 To monitor channel 16, press the 16/9

3 To monitor channel 9, press the 16/9

4 To return to channel 20, press the 16/9

Atlantis 250CE.indd 12 30/8/07 4:04:12 PM

1 To select Triple Watch mode, press the

2 To exit from Triple Watch, press the TRI

Atlantis 250CE.indd 13 30/8/07 4:04:13 PM

1 Select the channel to enter into memory

2 Press the MEM button for two seconds to

3 Press shortly and successively the MEM

Atlantis 250CE.indd 14 30/8/07 4:04:13 PM

2 Press the MEM button for two secons.

2 To stop scanning, press the SCAN

Atlantis 250CE.indd 15 30/8/07 4:04:14 PM

2 To transmit, press and hold the PTT (push-

3 To return to receive, release the PTT key.

Lighted Keys and Display

Turning and reactivating the Key Beep

To turn off or reactivate the Key beep:

Caution: Changes or modifications to this product not expressly