Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Method Statement Flooring

    Uploaded by

    manish
    1. This document outlines the work method statement for tiling works, including materials, equipment, and work procedures. 2. It provides flow charts showing the step-by-step process for installing wall tiles and floor tiles, with checkpoints for quality control. 3. The document describes requirements for delivery, storage, and handling of materials, as well as pre-installation checks and the execution of tiling for both walls and floors.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Method Statement Flooring

    Uploaded by

    manish
    1K views11 pages
    1. This document outlines the work method statement for tiling works, including materials, equipment, and work procedures. 2. It provides flow charts showing the step-by-step process for installing wall tiles and floor tiles, with checkpoints for quality control. 3. The document describes requirements for delivery, storage, and handling of materials, as well as pre-installation checks and the execution of tiling for both walls and floors.

    Original Description:

    METHOD

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document outlines the work method statement for tiling works, including materials, equipment, and work procedures. 2. It provides flow charts showing the step-by-step process for installing wall tiles and floor tiles, with checkpoints for quality control. 3. The document describes requirements for delivery, storage, and handling of materials, as well as pre-installation checks and the execution of tiling for both walls and floors.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    1K views11 pages

    Method Statement Flooring

    Uploaded by

    manish
    1. This document outlines the work method statement for tiling works, including materials, equipment, and work procedures. 2. It provides flow charts showing the step-by-step process for installing wall tiles and floor tiles, with checkpoints for quality control. 3. The document describes requirements for delivery, storage, and handling of materials, as well as pre-installation checks and the execution of tiling for both walls and floors.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 11

    Page:of 6

    Automatic Zoom

    WALL & FLOOR TILING WORKS METHOD STATEMENT


    1
    MATERIALS & EQUIPMENTS
    Type of materials
    1st delivery
    date**
    Type of equipments
    Quantity
    Tiles
    Concrete Mixer
    1
    Cement
    Steel and Wooden Trowel
    2
    Wash fine sand
    Spray Paint
    1
    Course sand
    Level ruler/Spirit Level
    3
    Level pipe
    3
    Cutter
    3
    Hammer
    3
    Seive (for checking)
    1
    2
    WORK METHOD STATEMENT
    The attached Work Method Statement shall include the following :
    2.1
    Flow Chart
    (A)
    WALL
    Remark
    1. Ensure all surfaces are clean
    and free from dust & dirt.
    Start
    SITE CLEARANCE
    Checked by
    QC/SS/COW
    Acceptable
    NOOO
    A
    A

    1. Setting out alignment,


    level, gradient, height and
    positioning of other services.
    1. Provide level pegs to ensure
    correct squareness &
    verticality.
    1. Selected actual ceramic tiles shall
    be fixed.
    2. Ensure tiles are even and
    consistent in colour/design.
    3. Allow for M&E openings.
    4. Tile joints shall be 1-2mm.
    5. Tiles shall be soaked in water
    NO
    before fixing.
    NO
    SETTING OUT
    Checked
    by
    QC/SS/CO
    W
    Acceptable
    FIXING OF WALL TILES
    Checked by
    QC/SS/CO
    W
    Acceptable
    Checked
    by
    QC/SS/CO
    W
    Acceptable
    NO
    NO
    CEMENT RENDERING
    (BACKING) TO WALL
    YES
    YES
    YES
    TILE JOINTS SEALED
    TO NEXT STAGE OF WORK
    Checked by
    QC/SS/CO
    W
    Acceptable
    (B)
    FLOOR
    1. Ensure all surfaces are clean &
    free from dust and dirt.
    1. Provide level pegs to ensure
    correct levels/flow direction
    Cement mortar 1:3 mix.
    1)
    Selected actual non-slip ceremic
    floor tiles shall be laid.
    2)
    Follow the X-Y axis line for
    straightness of tiles alignment.
    3)
    Tile joints shall be 3-4mm
    maximum & joints to be
    consistants for floor tiles.
    NO
    YES
    SITE CLEARING
    CEMENT SCREED TO FLOOR
    SETTING OUT
    Checked by
    QC/SS/CO
    W
    Acceptable
    START
    Checked by
    QC/SS/CO
    W
    Acceptable
    NO
    Checked by
    QC/SS/CO
    W
    Acceptable
    FIXING OF FLOOR TILES
    (by wet method)
    Checked by
    QC/SS/CO
    W
    Acceptable
    A
    NO
    NO
    YES
    YES

    Thanks for rating! Rate 1 more document to earn a free unlock.


    2.2
    OBJECTIVE
    Objective of this work method statement is to describe the sequence of work and coordination of
    supply and installation of tiling work from the initial stage to the final stage and handing over.
    2.3
    Delivery, storage, handling and protection of materials at site.
    2.3.1
    Tiles delivered to site in paper box and on pallet shall be stored in original unopened
    containers with all labels intact and legible at time of use.
    2.3.2
    Cement delivered in paper bag from weighing 50kg per bag.
    2.3.3
    Cement are stored in a covered raised leveled floor to avoid direct contact with weather
    and dampness.
    2.3.4
    Sources of sand are from reputable sandpit fine washed clean sand free from
    impurities.
    2.3.5
    Sand storage area shall be at dry hard ground as backing to avoid direct contact with
    the ground.
    2.4
    Pre-installation requirement
    2.4.1
    To obtain tile sample i.a.w. construction drawings and contracts specification and
    submit to Architect for approval.
    2.4.2
    To ensure all wall and floor surfaces in eveness, verticality and squareness of all
    angles.
    2.4.3
    No tiles shall be laid until the base surface is completely dry, clean and free of loose
    materials to provide a good keyed surface to receive the tiling.
    2.4.4
    Provide sufficient level pegs to control the verticality, thickness and alignment of wall
    and floor screeding.
    2.4.5
    All tiles shall be dampened before fixing.
    2.4.6
    Cement and sand mortar mix 1:3
    2.4.7
    Ensure waterproofing have been completed and ponding tested.
    2.5
    Execution of work
    (A)
    Wall Tiles
    1.6.1
    Brickwall to be clean from all dusts and dirts.
    1.6.2
    Setting out alignment, levels and verticality by using level pegs.
    1.6.3
    Plastering (backing) to brickwall with cement and sand mortar 1:3
    1.6.4
    The backing shall be allow to set and fully cured.
    1.6.5
    Selected ceramic wall tiles shall be used and soaked in water until fully saturated.
    1.6.6
    Fixing of wall tiles shall then be done from lowest level upwards and in a continuous
    manner.
    1.6.7
    Allow openings for all M&E services within the tiled areas.
    1.6.8
    Ensure that all tile joints shall be 1-2mm wide and be consistent throughout.
    1.6.9
    Joints shall be applied with white cement.
    A
    TILE JOINTS SEALED
    COMPLETION

    (B)
    Floor Tiles
    2.5.1
    All floor shall be clean from debris, dusts and dirts.
    2.5.2
    Use string marker to mark the control levels on all four walls (for rooms without wall
    tiles).
    2.5.3
    Provide level pegs to control the levels at 1.2 mm center to center.
    2.5.4
    Cement screed the floor with cement and sand mortar mix 1:3 to 2% fall to floor trap.
    2.5.5
    Allow all cement screed to be fully set and cured.
    2.5.6
    Take the permanent features (such as long wall) to provide the X-Y axis base line and
    marked with string marker.
    2.5.7
    Selected non-slip ceramic floor tiles shall then be laid with cement paste applied on the
    base using wet method of laying.
    2.5.8
    Ensure that the tile joints shall be 3-4mm maximum wide and all joints shall be
    consistent.
    2.5.9
    Ensure fall in wet areas like kitchen and toilets must be towards the floor traps or
    discharge points(2% fall gradient).
    2.5.10
    All gaps shall then be fully filled.
    2.6
    Point of inspection and checking and their frequency:
    2.6.1
    Ensure concrete surfaces clean and free from dust and dirt.
    2.6.2
    Setting out alignment, levels, gradient, verticality will be correct.
    2.6.3
    Tile size, thickness, evenness, squareness shall be checked correctly.
    2.6.4
    Joints are aligned and consistent with skirting and wall tiles.
    2.6.5
    Check squareness, vertically of boxing up.
    2.6.6
    Check tiling around door & window frame / openings.
    2.6.7
    Ensure wall & floor tile joints are in line & consistent in thickness.
    2.6.8
    Ensure door opening drop to be 25 mm.
    2.6.9
    Ensure 2% flow towards floor trap.
    2.6.10
    Ensure dimension coordination at
    a.
    floor trap / floor tile junction
    b.
    wall tile / floor tile junction.
    c.
    Window opening / frame / wall tile junction.
    d.
    Door frame / wall tile junction.
    2.7
    Post installation.
    2.7.1
    Site cleaning.
    2.7.2
    Evenness of tiles and colour.
    2.7.3
    No chipping, cracks or mortar droppings.
    2.7.4
    No hollowness (up to 85 %)
    2.7.5
    Protection of all laid tiles
    3
    Checklist and inspection form.

    Thanks for rating! Rate 1 more document to earn a free unlock.

    Page:of 6

    Automatic Zoom

    WALL & FLOOR TILING WORKS METHOD STATEMENT


    1
    MATERIALS & EQUIPMENTS
    Type of materials
    1st delivery
    date**
    Type of equipments
    Quantity
    Tiles
    Concrete Mixer
    1
    Cement
    Steel and Wooden Trowel
    2
    Wash fine sand
    Spray Paint
    1
    Course sand
    Level ruler/Spirit Level
    3
    Level pipe
    3
    Cutter
    3
    Hammer
    3
    Seive (for checking)
    1
    2
    WORK METHOD STATEMENT
    The attached Work Method Statement shall include the following :
    2.1
    Flow Chart
    (A)
    WALL
    Remark
    1. Ensure all surfaces are clean
    and free from dust & dirt.
    Start
    SITE CLEARANCE
    Checked by
    QC/SS/COW
    Acceptable
    NOOO
    A
    A

    1. Setting out alignment,


    level, gradient, height and
    positioning of other services.
    1. Provide level pegs to ensure
    correct squareness &
    verticality.
    1. Selected actual ceramic tiles shall
    be fixed.
    2. Ensure tiles are even and
    consistent in colour/design.
    3. Allow for M&E openings.
    4. Tile joints shall be 1-2mm.
    5. Tiles shall be soaked in water
    NO
    before fixing.
    NO
    SETTING OUT
    Checked
    by
    QC/SS/CO
    W
    Acceptable
    FIXING OF WALL TILES
    Checked by
    QC/SS/CO
    W
    Acceptable
    Checked
    by
    QC/SS/CO
    W
    Acceptable
    NO
    NO
    CEMENT RENDERING
    (BACKING) TO WALL
    YES
    YES
    YES
    TILE JOINTS SEALED
    TO NEXT STAGE OF WORK
    Checked by
    QC/SS/CO
    W
    Acceptable
    (B)
    FLOOR
    1. Ensure all surfaces are clean &
    free from dust and dirt.
    1. Provide level pegs to ensure
    correct levels/flow direction
    Cement mortar 1:3 mix.
    1)
    Selected actual non-slip ceremic
    floor tiles shall be laid.
    2)
    Follow the X-Y axis line for
    straightness of tiles alignment.
    3)
    Tile joints shall be 3-4mm
    maximum & joints to be
    consistants for floor tiles.
    NO
    YES
    SITE CLEARING
    CEMENT SCREED TO FLOOR
    SETTING OUT
    Checked by
    QC/SS/CO
    W
    Acceptable
    START
    Checked by
    QC/SS/CO
    W
    Acceptable
    NO
    Checked by
    QC/SS/CO
    W
    Acceptable
    FIXING OF FLOOR TILES
    (by wet method)
    Checked by
    QC/SS/CO
    W
    Acceptable
    A
    NO
    NO
    YES
    YES

    Thanks for rating! Rate 1 more document to earn a free unlock.


    2.2
    OBJECTIVE
    Objective of this work method statement is to describe the sequence of work and coordination of
    supply and installation of tiling work from the initial stage to the final stage and handing over.
    2.3
    Delivery, storage, handling and protection of materials at site.
    2.3.1
    Tiles delivered to site in paper box and on pallet shall be stored in original unopened
    containers with all labels intact and legible at time of use.
    2.3.2
    Cement delivered in paper bag from weighing 50kg per bag.
    2.3.3
    Cement are stored in a covered raised leveled floor to avoid direct contact with weather
    and dampness.
    2.3.4
    Sources of sand are from reputable sandpit fine washed clean sand free from
    impurities.
    2.3.5
    Sand storage area shall be at dry hard ground as backing to avoid direct contact with
    the ground.
    2.4
    Pre-installation requirement
    2.4.1
    To obtain tile sample i.a.w. construction drawings and contracts specification and
    submit to Architect for approval.
    2.4.2
    To ensure all wall and floor surfaces in eveness, verticality and squareness of all
    angles.
    2.4.3
    No tiles shall be laid until the base surface is completely dry, clean and free of loose
    materials to provide a good keyed surface to receive the tiling.
    2.4.4
    Provide sufficient level pegs to control the verticality, thickness and alignment of wall
    and floor screeding.
    2.4.5
    All tiles shall be dampened before fixing.
    2.4.6
    Cement and sand mortar mix 1:3
    2.4.7
    Ensure waterproofing have been completed and ponding tested.
    2.5
    Execution of work
    (A)
    Wall Tiles
    1.6.1
    Brickwall to be clean from all dusts and dirts.
    1.6.2
    Setting out alignment, levels and verticality by using level pegs.
    1.6.3
    Plastering (backing) to brickwall with cement and sand mortar 1:3
    1.6.4
    The backing shall be allow to set and fully cured.
    1.6.5
    Selected ceramic wall tiles shall be used and soaked in water until fully saturated.
    1.6.6
    Fixing of wall tiles shall then be done from lowest level upwards and in a continuous
    manner.
    1.6.7
    Allow openings for all M&E services within the tiled areas.
    1.6.8
    Ensure that all tile joints shall be 1-2mm wide and be consistent throughout.
    1.6.9
    Joints shall be applied with white cement.
    A
    TILE JOINTS SEALED
    COMPLETION

    (B)
    Floor Tiles
    2.5.1
    All floor shall be clean from debris, dusts and dirts.
    2.5.2
    Use string marker to mark the control levels on all four walls (for rooms without wall
    tiles).
    2.5.3
    Provide level pegs to control the levels at 1.2 mm center to center.
    2.5.4
    Cement screed the floor with cement and sand mortar mix 1:3 to 2% fall to floor trap.
    2.5.5
    Allow all cement screed to be fully set and cured.
    2.5.6
    Take the permanent features (such as long wall) to provide the X-Y axis base line and
    marked with string marker.
    2.5.7
    Selected non-slip ceramic floor tiles shall then be laid with cement paste applied on the
    base using wet method of laying.
    2.5.8
    Ensure that the tile joints shall be 3-4mm maximum wide and all joints shall be
    consistent.
    2.5.9
    Ensure fall in wet areas like kitchen and toilets must be towards the floor traps or
    discharge points(2% fall gradient).
    2.5.10
    All gaps shall then be fully filled.
    2.6
    Point of inspection and checking and their frequency:
    2.6.1
    Ensure concrete surfaces clean and free from dust and dirt.
    2.6.2
    Setting out alignment, levels, gradient, verticality will be correct.
    2.6.3
    Tile size, thickness, evenness, squareness shall be checked correctly.
    2.6.4
    Joints are aligned and consistent with skirting and wall tiles.
    2.6.5
    Check squareness, vertically of boxing up.
    2.6.6
    Check tiling around door & window frame / openings.
    2.6.7
    Ensure wall & floor tile joints are in line & consistent in thickness.
    2.6.8
    Ensure door opening drop to be 25 mm.
    2.6.9
    Ensure 2% flow towards floor trap.
    2.6.10
    Ensure dimension coordination at
    a.
    floor trap / floor tile junction
    b.
    wall tile / floor tile junction.
    c.
    Window opening / frame / wall tile junction.
    d.
    Door frame / wall tile junction.
    2.7
    Post installation.
    2.7.1
    Site cleaning.
    2.7.2
    Evenness of tiles and colour.
    2.7.3
    No chipping, cracks or mortar droppings.
    2.7.4
    No hollowness (up to 85 %)
    2.7.5
    Protection of all laid tiles
    3
    Checklist and inspection form.

    Thanks for rating! Rate 1 more document to earn a free unlock.

    You might also like