Linux admin question

=============================
1. How do you take a single line of input from the user in a shell script ??

2. Write a regular expression (or sed script) to replace all occurrences of the letter f,
followed by any number of characters, followed by the letter a, followed by one or
more numeric characters, followed by the letter n, and replace whats found with the
string UNIX.

3. Write a program in any language you choose, to reverse a file.

4. on a Sun that shows the SCSI devices?

5. Where is that value controlled?

6. What happens to a child process that dies and has no parent process to wait for it and
whats bad about this?

7. why is this good?

8. What is the difference between UDP and TCP?

9. What is DNS?

10. What does nslookup do?

11. How do you create a swapfile?

12. How would you check the route table on a workstation/server?

13. How do you find which ypmaster you are bound to?

14. How do you fix a problem where a printer will cutoff anything over 1MB?

15. What is the largest file system size in solaris? SunOS?

16. What are the different RAID levels?

^Back to Top

Interview questions for Linux admin

 1. Advantages/disadvantages of script vs compiled program.

2. Name a replacement for PHP/Perl/MySQL/Linux/Apache and show main differences.

3. Why have you choosen such a combination of products?

4. Differences between two last MySQL versions. Which one would you choose and
when/why?

5. Main differences between Apache 1.x and 2.x. Why is 2.x not so popular? Which one
would you choose and when/why?

6. Which Linux distros do you have experience with?

7. Which distro you prefer? Why?

8. Which tool would you use to update Debian / Slackware / RedHat / Mandrake / SuSE ?

9. Youre asked to write an Apache module. What would you do?

10. Which tool do you prefer for Apache log reports?

11. Your portfolio. (even a PHP guest book may work well)

12. What does route command do?

13. Differences between ipchains and iptables.

14. Whats eth0, ppp0, wlan0, ttyS0, etc.

15. What are different directories in / for?

16. Partitioning scheme for new webserver. Why?

^Back to Top

Read more at TechInterviews.com

Unix/Linux programming interview questions

Question 1: What is the major advantage of a hash table? (Asked by Silicon Magic Corp.
people)
Answer: The major advantage of a hash table is its speed. Because the hash function is to take a
range of key values and transform them into index values in such a way that the key values are
distributed randomly across all the indices of a hash table.

Question 2: What are the techniques that you use to handle the collisions in hash tables?
(Asked by Silicon Magic Corp. people)

Answer: We can use two major techniques to handle the collisions. They are open addressing and
separate chaining. In open addressing, data items that hash to a full array cell are placed in
another cell in the array. In separate chaining, each array element consist of a linked list. All data
items hashing to a given array index are inserted in that list.

Question 3: In Unix OS, what is the file server? (Asked by Silicon Magic Corp. people)

Answer: The file server is a machine that shares its disk storage and files with other machines on
the network.

Question 4: What is NFS? What is its job?(Asked by Silicon Magic Corp. people)

Answer: NFS stands for Network File System. NFS enables filesystems physically residing on
one computer system to be used by other computers in the network, appearing to users on the
remote host as just another local disk.

Question 5: What is CVS? List some useful CVS commands.(Asked by Silicon Magic
Corp.people)

Anser: CVS is Concurrent Version System. It is the front end to the RCS revision control system
which extends the notion of revision control from a collection of files in a single directory to a
hierarchical collection of directories consisting of revision controlled files. These directories and
files can be combined together to form a software release.
There are some useful commands that are being used very often. They are

cvs checkout
cvs update
cvs add
cvs remove
cvs commit

^Back to Top

Unix/Linux administration interview questions

What is LILO?
LILO stands for Linux boot loader. It will load the MBR, master boot record, into the memory,
and tell the system which partition and hard drive to boot from.

What is the main advantage of creating links to a file instead of copies of the file?

A: The main advantage is not really that it saves disk space (though it does that too) but, rather,
that a change of permissions on the file is applied to all the link access points. The link will show
permissions of lrwxrwxrwx but that is for the link itself and not the access to the file to which the
link points. Thus if you want to change the permissions for a command, such as su, you only
have to do it on the original. With copies you have to find all of the copies and change
permission on each of the copies.

Write a command to find all of the files which have been accessed within the last 30 days.

find / -type f -atime -30 > December.files

This command will find all the files under root, which is /, with file type is file. -atime -30
will give all the files accessed less than 30 days ago. And the output will put into a file call
December.files.

What is the most graceful way to get to run level single user mode?

A: The most graceful way is to use the command init s.

If you want to shut everything down before going to single user mode then do init 0 first and
from the ok prompt do a boot -s.

What does the following command line produce? Explain each aspect of this line.

$ (date ; ps -ef | awk {print $1} | sort | uniq | wc -l ) >> Activity.log

A: First lets dissect the line: The date gives the date and time as the first command of the line,
this is followed by the a list of all running processes in long form with UIDs listed first, this is
the ps -ef. These are fed into the awk which filters out all but the UIDs; these UIDs are piped into
sort for no discernible reason and then onto uniq (now we see the reason for the sort - uniq only
works on sorted data - if the list is A, B, A, then A, B, A will be the output of uniq, but if its A,
A, B then A, B is the output) which produces only one copy of each UID.

These UIDs are fed into wc -l which counts the lines - in this case the number of distinct UIDs
running processes on the system. Finally the results of these two commands, the date and the wc
-l, are appended to the file "Activity.log". Now to answer the question as to what this command
line produces. This writes the date and time into the file Activity.log together with the number of
distinct users who have processes running on the system at that time. If the file already exists,
then these items are appended to the file, otherwise the file is created.

^Back to Top
Read more at TechInterviews.com

Solaris interview questions

1. List the files in current directory sorted by size ? - ls -l | grep ^- | sort -nr

2. List the hidden files in current directory ? - ls -a1 | grep "^\."

3. Delete blank lines in a file ? - cat sample.txt | grep -v ^$ > new_sample.txt

4. Search for a sample string in particular files ? - grep .Debug. *.confHere grep uses the
string .Debug. to search in all files with extension..conf. under current directory.

5. Display the last newly appending lines of a file during appendingdata to the same
file by some processes ? - tail .f Debug.logHere tail shows the newly appended data into
Debug.log by some processes/user.

6. Display the Disk Usage of file sizes under each directory in currentDirectory ? - du
-k * | sort .nr (or) du .k . | sort -nr

7. Change to a directory, which is having very long name ? - cd CDMA_3X_GEN*Here

original directory name is . .CDMA_3X_GENERATION_DATA..

8. Display the all files recursively with path under current directory ? - find . -depth
-print

9. Set the Display automatically for the current new user ? - export DISPLAY=`eval
who am i | cut -d"(" -f2 | cut -d")" -f1`Here in above command, see single quote, double
quote, grave ascent is used. Observe carefully.

10. Display the processes, which are running under yourusername ? - ps .aef | grep
MaheshvjHere, Maheshvj is the username.

11. List some Hot Keys for bash shell ? - Ctrl+l . Clears the Screen. Ctrl+r . Does a search
in previously given commands in shell. Ctrl+u - Clears the typing before the hotkey.
Ctrl+a . Places cursor at the beginning of the command at shell. Ctrl+e . Places cursor at
the end of the command at shell. Ctrl+d . Kills the shell. Ctrl+z . Places the currently
running process into background.

12. Display the files in the directory by file size ? - ls .ltr | sort .nr .k 5

13. How to save man pages to a file ? - man <command> | col .b > <output-file>Example :
man top | col .b > top_help.txt

14. How to know the date & time for . when script is executed ? - Add the following
script line in shell script.eval echo "Script is executed at `date`" >> timeinfo.infHere,
 .timeinfo.inf. contains date & time details ie., when script is executed and history related
to execution.

15. How do you find out drive statistics ? - iostat -E

16. Display disk usage in Kilobytes ? - du -k

17. Display top ten largest files/directories ? - du -sk * | sort -nr | head

18. How much space is used for users in kilobytes ? - quot -af

19. How to create null file ? - cat /dev/null > filename1

20. Access common commands quicker ? - ps -ef | grep -i $@

21. Display the page size of memory ? - pagesize -a

22. Display Ethernet Address arp table ? - arp -a

23. Display the no.of active established connections to localhost ? - netstat -a | grep EST

24. Display the state of interfaces used for TCP/IP traffice ? - netstat -i

25. Display the parent/child tree of a process ? - ptree <pid> Example: ptree 1267

26. Show the working directory of a process ? - pwdx <pid> Example: pwdx 1267

27. Display the processes current open files ? - pfiles <pid> Example: pfiles 1267

28. Display the inter-process communication facility status ? - ipcs

29. Display the top most process utilizing most CPU ? - top .b 1

30. Alternative for top command ? - prstat -a

Linux interview questions
-------------------------------
* How to check all open ports on linux machine and block unsed ports?
netstat -t
#nmap -v localhost for tcp
#nmap -sU localhost for udp

#netstat -tulp
or
#netstat -tulpn

to verfy the open ports

-------------------------------
* how u use the iptable firewall to restrict ssh,telnet,ftp
For SSH
iptables -A INPUT -s -p tcp --dport <22> -j
REJECT/DROP/DENY

For Telnet
iptables -A INPUT -s -p tcp --dport <23> -j
REJECT/DROP/DENY

For FTP
iptables -A INPUT -s -p tcp --dport <21> -j
REJECT/DROP/DENY

-------------------------------------

* what is the difference between unix and linux

graphics is the main difference

extra more command are in linux
userfriendly then unix

the unix is the platform dependent the linux is platform

independent. we cann't install unix in all machine we
recquired a special machine to install unix, but linux is
not like that it support all machines

filesystem are different

there diff lies in kernel
linux is under gpl and unix proprietary
Difference Between Linux and Unix
1)Linux default shell is /bin/bash, where Unix default shell
is /bin/sh (other shell also supported)
2) Linux Store all their command history,but if the default
shell is /bin/sh in Unix, then Unix not store Command history.
3) Linux support Tab key, but unix not support Tab key
-------------------------------------

Who owns the data dictionary?

The Oracle user SYS owns all base tables and user-
accessible views of the data dictionary. Therefore, no
Oracle user should ever alter (update, delete, or insert)
any rows or schema objects contained in the SYS schema,
because such activity can compromise data integrity. The
security administrator should keep strict control of this
central account.

-------------------------------------
which file contains information about os wether it's 32
bit or 64 bit?

ANS: /proc/cpuinfo
or
$uname -m
or
/usr/bin/file
--------------------------------
what contains information about file and directory creating time or
modification time?

An inode is a data structure on a Unix / Linux file system.

An inode stores basic information about a regular file,
directory, or other file system object. You can use
following two commands to display an inode:

[a] ls command : list directory contents

-----------------------------------
What are RPM?s, what do they offer?

The full form of RPM is Redhat Package Manager.

rpm is a powerful Package Manager, which can be used
to build,install, query, verify, update, and erase
individual software packages. A package consists of an
archive of files and meta-data used to install and erase the
archive files.

[b] stat command : display file or file system status

eg : # stat /etc/passwd
Output:
File: `/etc/group'
Size: 566 Blocks: 16 IO Block: 4096
regular file
Device: fd00h/64768d Inode: 2443679 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: (
0/ root)
Access: 2009-08-12 08:23:31.245032672 +0530
Modify: 2002-01-01 05:54:15.000000000 +0530
Change: 2002-01-01 05:54:15.000000000 +0530
--------------------------------------------------
*how to confirm from client end about nfs server sharing?

with mount and showmount -e server IP

-------------------------------------------------
How do i check which nfs version I am using ?

rpcinfo -p localhost | grep -i nfs

This cmd is used for nfs version

rpm -qa | grep nfs
rpm -qi nfs nfs-utils
yum info nfs nfs-utils

------------------------------------------------
Through ssh whole directory structure from / is shared regardless the user
we have connected with ....... how do i prevent sharing ??

vi /etc/ssh/sshd_config
"in last line enter the folowing entry"
AllowUsers "username"

And

vi /etc/hosts.deny
"in last line enter the folowing entry"
sshd: ALL EXCEPT "DOMAIN-NAME"

its benefitial to use setfacl command for secure your

stuff..
-------------------------------------------------------
* what restrict telnet for root itself but allow for other user

Root can login through telnet session, but by default it is

disabled. You can enable by appending /etc/securetty file
open /etc/securetty using vi

#vi /etc/securetty

pts/0
pts/1

don't remove anything from this /etc/securetty , just

append your entry

vi /etc/pam.d/login

auth required pam_securetty.so== 1st line

should be placed as required.if we change the option as
sufficient instead of required telnet can login as "root".
-----------------------------------------------------------
How to send automated email to a set of people at fixed time ?

1)just create a alias of people and create a command file and

create a crond entry
2)configure sendmail & postfix to configure procmail..
Or configure Q-mail / Squirrel mail & use contab
----------------------------------------------------
how do i check which package has installed some command
suppose ls , mkdir or whatever ???

rpm -qa | grep "pakage name"

rpm -qa | grep

yum install it will show already installed
or not if not then it will install
Pirut same as yum
rpm -qa /usr/bin/ls
gives you from which rpm the "ls" command is installed.
-----------------------------------------------------

What is the difference between Telnet and SSH?

ssh is a secured shell, where telnet is not a secured

one.when you ssh to trasnfer data between a system, the data
will be send in the encrypted form, where the hacker cannot
encode or decode it. While you telnet,the data send between
the system is alphabetical format(ASCII), where every one
can understand. More over as per network security, telnet
and ftp are prohibited. Always, trust SSL based data transfer.

Telnet ->
Its just getting (Telenet) a connection to the server.
Its not more secure. Anybody can use it.
It can be easly hacked.It can be easily read by anybody in
that network

SSH -> secured shocket shell

Its more secure than Telnet .
This has an encrption and decrption of the data /usr/pwd
None can hack this. It is the good way to transfer the data

---------------------------------------------------
What is the difference between home directory and working directory?

home directory is one over which user have complete control

and it is its default working directory when its logs in.
while the working directory is the users current directory
which may or may not be his home directory.
------------------------------------------
How can you see all mounted drives?

with df -hT command and

with the mount command.
#vi /etc/fstab contains perminant mounts
---------------------------------------------

When you install RedHat what is the kernel mode ? What is kernel
compilation / upgrade ?

Kernel mode, also referred to as system mode, is one of the

two distinct modes of operation of the CPU in Linux. The
other is user mode, a non-privileged mode for user programs,
that is, for everything other than the kernel.
When the CPU is in kernel mode, it is assumed to be
executing trusted software, and thus it can execute any
instructions and reference any memory addresses. The kernel
is trusted software, but all other programs are considered
untrusted software. Thus, all user mode software must
request use of the kernel by means of a system call in order
to perform privileged instructions, such as process creation
or input/output.

Kernel compilation is installing a new kernel or adding

custom modules to the same kernel.
Kernel upgradation is upgrading it to a different version
altogether.
------------------------------
what is the difference between fork and thread ? and parent and child
process in fork system call?
fork() system call in UNIX causes creation of a new process
the new process (child process) which is an exact copy of
the calling process(parent process).return value from fork
() is used to distinguish the parent from the child; the
parent receives the child's process id, but the child
receives zero.

A thread is a stream of instructions that can be scheduled

as an independent unit.

A thread is a stream of instructions that can be scheduled

as an independent unit. It is important to understand the
difference between a thread and a process. A process
contains two kinds of information: resources that are
available to the entire process such as program
instructions, global data and working directory, and
schedulable entities, which include program counters and
stacks. A thread is an entity within a process that
consists of the schedulable part of the process.

A fork() duplicates all the threads of a process. The

problem with this is that fork() in a process where threads
work with external resources may corrupt those resources
(e.g., writing duplicate records to a file) because neither
thread may know that the fork() has occurred.

When a new perl thread is created, all the data associated

with the current thread is copied to the new thread, and is
subsequently private to that new thread! This is similar in
feel to what happens when a UNIX process forks, except that
in this case, the data is just copied to a different part
of memory within the same process rather than a real fork
taking place.

A fork() induces a parent-child relationship between two

processes. Thread creation induces a peer relationship
between all the threads of a process.
--------------------------------------------------------
You want to create a compressed backup of the users' home directories.
What utility should you use?

Tar -czf kk.tar.gz /home/username

If we want to extract
the the command is tar -xzf kk.tar.gz
--------------------------------------------------------
What is the difference between an argument and an option/switch?

A linux/unix syntax format is as follows

command option arguement

example: ls -a /boot
here ls command, -a is option,/boot is arguement

option specifies the command how to run

arguement specifies the command on what to run
---------------------------------------------------------
How does the boot process[init levels] work on Linux? How is it different
from Solaris?

When an x86 computer is booted, the processor looks at the

end of the system memory for the BIOS (Basic Input/Output
System) and runs it. The BIOS program is written into
permanent read-only memory and is always available for use.
The BIOS provides the lowest level interface to peripheral
devices and controls the first step of the boot process.

The BIOS tests the system, looks for and checks peripherals,
and then looks for a drive to use to boot the system.
Usually it checks the floppy drive (or CD-ROM drive on many
newer systems) for bootable media, if present, and then it
looks to the hard drive. The order of the drives used for
booting is usually controlled by a particular BIOS setting
on the system. Once Linux is installed on the hard drive of
a system, the BIOS looks for a Master Boot Record (MBR)
starting at the first sector on the first hard drive, loads
its contents into memory, then passes control to it.

This MBR contains instructions on how to load the GRUB (or

LILO) boot-loader, using a pre-selected operating system.
The MBR then loads the boot-loader, which takes over the
process (if the boot-loader is installed in the MBR). In the
default Red Hat Linux configuration, GRUB uses the settings
in the MBR to display boot options in a menu. Once GRUB has
received the correct instructions for the operating system
to start, either from its command line or configuration
file, it finds the necessary boot file and hands off control
of the machine to that operating system.

1. The system BIOS checks the system and launches the first
stage boot loader on the MBR of the primary hard disk.

2. The Frist stage boot loader loads itself into memory and
launches the second stage boot loader from the /boot/
partition.

3. The second stage boot loader loads the kernel into

memory, which in turn loads any necessary modules and
mounts the root
partition read-only.

4. The kernel transfers control of the boot process to the /

sbin/init program.

5. The /sbin/init program loads all services and user-space

tools, and mounts all partitions
listed in /etc/fstab.

6. The user is presented with a login screen for the

freshly booted Linux system.
-------------------------------------------------------------
What are the main differences between RHEL4 & RHEL5?

XEN, YUM and improved SELinux

all the features updated with better options
Better GUI support then RHEL4
YUM over RPM package management
IPTables and SELinux for more secure environment
ext2 & ext3 file system
In RHEL 4 SELinux Block only 13 services, But on RHEL 5
SElinux Block 80 services
-------------------------------------------------------
What text filter can you use to display a binary file in octal numbers?

hexdump file1 > file2

--------------------------------------------------------
tell me some of the Linux HotKeys do you know?

alt+f1 for application menu

ctl+l to clear screen
alt+f2 to open run application window
alt+f3 for find
alt+f4 to close application
alt+f9 to minimise window
Ctrl-Alt-D Show desktop
Crtl-Alt-Backspace Restart XWindows
-------------------------------------------------

What file should you examine to determine the defined runlevels for your
system?

/etc/inittab

id:X:initdefault

where X=runlevel (ex.0 to 6)

0 =system poweroff
1 = single user mode
2 = multiuser mode without network and X window
3 = multiuser mode with network without X window
4 = unused
5 = X11 (multiuser mode with network and X window
6 = reboot
--------------------------------------
What is the name and path of the main system log?

/var/log/messages system log messages can be seen here

/var/log/dmesg Kernel boot log messages can view
There are Three centralized loggin demons
1)syslogd
2)klogd
3)auditd

klogd:- collect log file created by the Kernel

syslogd:- Collect log file created by the system
auditd:- Collect log file created by the SELinux

After collecting the log system store logs on different location

/var/log/dmesg:- Created at boot time, by kernel
/var/log/messages:- standard system error message,
/var/log/secure:- authentication related log
/var/log/maillog:- Mail related log
/var/log/audit/audit.log:-Selinux related log

We can redirect the log by configuring

/etc/sysconfig/syslog
/etc/syslog.conf

-------------------------------------------------
what is the difference between semaphore, mutex & spinlock?

Kernel Locking Techniques

Semaphores in Linux are sleeping locks. Because they cause a
task to sleep on contention, instead of spin, they are used
in situations where the lock-held time may be long.
Conversely, since they have the overhead of putting a task
to sleep and subsequently waking it up, they should not be
used where the lock-held time is short. Since they sleep,
however, they can be used to synchronize user contexts
whereas spinlocks cannot. In other words, it is safe to
block while holding a semaphore.

A "mutex" (or "mutual exclusion lock") is a signal that two

or more asynchronous processes can use to reserve a shared
resource for exclusive use. The first process that obtains
ownership of the "mutex" also obtains ownership of the
shared resource. Other processes must wait for for the first
process to release it's ownership of the "mutex" before they
may attempt to obtain it.

The most common locking primitive in the kernel is the

spinlock. The spinlock is a very simple single-holder lock.
If a process attempts to acquire a spinlock and it is
unavailable, the process will keep trying (spinning) until
it can acquire the lock. This simplicity creates a small and
fast lock.
---------------------------------------------------
What are seven fields in the /etc/passwd file.

1. Username: It is used when user logs in. It should be between 1 and 32 characters
in length.
2. Password: An x character indicates that encrypted password is stored in
/etc/shadow file.
3. User ID (UID): Each user must be assigned a user ID (UID). UID 0 (zero) is
reserved for root and UIDs 1-99 are reserved for other predefined accounts. Further
UID 100-999 are reserved by system for administrative and system
accounts/groups.
4. Group ID (GID): The primary group ID (stored in /etc/group file)
5. User ID Info: The comment field. It allow you to add extra information about the
users such as user's full name, phone number etc. This field use by finger
command.
6. Home directory: The absolute path to the directory the user will be in when they
log in. If this directory does not exists then users directory becomes /
7. Command/shell: The absolute path of a command or shell (/bin/bash). Typically,
this is a shell. Please note that it does not have to be a shell.

------------------------------------------------------

1. Q. How do you list files in a directory?

A. ls - list directory contents
ls -l (-l use a long listing format)

2. Q. How do you list all files in a directory, including the hidden files?
A. ls -a (-a, do not hide entries starting with .)

3. Q. How do you find out all processes that are currently running?
A. ps -f (-f does full-format listing.)

4. Q. How do you find out the processes that are currently running or a
particular user?
A. ps -au Myname (-u by effective user ID (supports names)) (a - all users)

5. Q. How do you kill a process?

A. kill -9 8 (process_id 8) or kill -9 %7 (job number 7)
kill -9 -1 (Kill all processes you can kill.)
killall - kill processes by name most (useful - killall java)
6. Q. What would you use to view contents of the file?
A. less filename
cat filename
pg filename
pr filename
more filename
most useful is command: tail file_name - you can see the end of the log file.

7. Q. What would you use to edit contents of the file?

A. vi screen editor or jedit, nedit or ex line editor

8. Q. What would you use to view contents of a large error log file?
A. tail -10 file_name ( last 10 rows)

9. Q. How do you log in to a remote Unix box?

A. Using telnet server_name or ssh -l ( ssh - OpenSSH SSH client (remote login
program))

10.Q. How do you get help on a UNIX terminal?

A. man command_name
info command_name (more information)

11.Q. How do you list contents of a directory including all of its

subdirectories, providing full details and sorted by modification time?
A. ls -lac
-a all entries
-c by time

12.Q. How do you create a symbolic link to a file (give some reasons of
doing so)?
A. ln /../file1 Link_name
Links create pointers to the actual files, without duplicating the contents of
the files. That is, a link is a way of providing another name to the same file.
There are two types of links to a file:Hard link, Symbolic (or soft) link;

13.Q. What is a filesystem?

A. Sum of all directories called file system.
A file system is the primary means of file storage in UNIX.
File systems are made of inodes and superblocks.

14.Q. How do you get its usage (a filesystem)?

A. By storing and manipulate files.
15.Q. How do you check the sizes of all users home directories (one
command)?
A. du -s
df

The du command summarizes disk usage by directory. It recurses through all

subdirectories and shows disk usage by each subdirectory with a final total at the
end.

More interview questions click here

# Mary has recently gotten married and wants to change her username from
mstone to mknight. Which of the following commands should you run to accomplish
this? Choose one: a. usermod -l mknight mstone b. usermod -l mstone mknight c.
usermod -u mknight mstone d. usermod -u mstone mknight
# After bob leaves the company you issue the command userdel bob. Although his
entry in the /etc/passwd file has been deleted, his home directory is still there. What
command could you have used to make sure that his home directory was also
deleted? Choose one: a. userdel -m bob b. userdel -u bob c. userdel -l bob d. userdel
-r bob

# All groups are defined in the /etc/group file. Each entry contains four fields in the
following order. Choose one: a. groupname, password, GID, member list b. GID,
groupname, password, member list c. groupname, GID, password, member list d.
GID, member list, groupname, password
# You need to create a new group called sales with Bob, Mary and Joe as members.
Which of the following would accomplish this? Choose one: a. Add the following line
to the /etc/group file: sales:44:bob,mary,joe b. Issue the command groupadd sales.
c. Issue the command groupadd -a sales bob,mary,joe d. Add the following line to
the /etc/group file: sales::44:bob,mary,joe
# What command is used to remove the password assigned to a group?
# You changed the GID of the sales group by editing the /etc/group file. All of the
members can change to the group without any problem except for Joe. He cannot
even login to the system. What is the problem? Choose one: a. Joe forgot the
password for the group. b. You need to add Joe to the group again. c. Joe had the
original GID specified as his default group in the /etc/passwd file. d. You need to
delete Joes account and recreate it.
# You need to delete the group dataproject. Which two of the following tasks should
you do first before deleting the group? A. Check the /etc/passwd file to make sure
no one has this group as his default group. B. Change the members of the
dataproject group to another group besides users. C. Make sure that the members
listed in the /etc/group file are given new login names. D. Verify that no file or
directory has this group listed as its owner. Choose one: a. A and C b. A and D c. B
and C d. B and D
# When you look at the /etc/group file you see the group kmem listed. Since it does
not own any files and no one is using it as a default group, can you delete this
group?
# When looking at the /etc/passwd file, you notice that all the password fields
contain x. What does this mean? Choose one: a. That the password is encrypted. b.
That you are using shadow passwords. c. That all passwords are blank. d. That all
passwords have expired.
# In order to improve your systems security you decide to implement shadow
passwords. What command should you use?
# What file contains the default environment variables when using the bash shell?
Choose one: a. ~/.profile b. /bash c. /etc/profile d. ~/bash
# You have created a subdirectory of your home directory containing your scripts.
Since you use the bash shell, what file would you edit to put this directory on your
path? Choose one: a. ~/.profile b. /etc/profile c. /etc/bash d. ~/.bash
# Which of the following interprets your actions when typing at the command line
for the operating system? Choose One a. Utility b. Application c. Shell d. Command
# What can you type at a command line to determine which shell you are using?
# You want to enter a series of commands from the command-line. What would be
the quickest way to do this? Choose One a. Press enter after entering each
command and its arguments b. Put them in a script and execute the script c.
Separate each command with a semi-colon (;) and press enter after the last
command d. Separate each command with a / and press enter after the last
command
# You are entering a long, complex command line and you reach the right side of
your screen before you have finished typing. You want to finish typing the necessary
commands but have the display wrap around to the left. Which of the following key
combinations would achieve this? Choose One a. Esc, /, Enter b. /, Enter c. ctrl-d,
enter d. esc, /, ctrl-d
# After typing in a new command and pressing enter, you receive an error message
indicating incorrect syntax. This error message originated from.. Choose one a. The
shell b. The operating system c. The command d. The kernel
# When typing at the command line, the default editor is the _____________ library.
# You typed the following at the command line ls -al /home/ hadden. What key
strokes would you enter to remove the space between the / and hadden without
having to retype the entire line? Choose one a. Ctrl-B, Del b. Esc-b, Del c. Esc-Del,
Del d. Ctrl-b, Del
# You would like to temporarily change your command line editor to be vi. What
command should you type to change it?
# After experimenting with vi as your command line editor, you decide that you
want to have vi your default editor every time you log in. What would be the
appropriate way to do this? Choose one a. Change the /etc/inputrc file b. Change
the /etc/profile file c. Change the ~/.inputrc file d. Change the ~/.profile file
# You have to type your name and title frequently throughout the day and would
like to decrease the number of key strokes you use to type this. Which one of your
configuration files would you edit to bind this information to one of the function
keys?
# In your present working directory, you have the files maryletter memo1
MyTelephoneandAddressBook What is the fewest number of keys you can type to
open the file MyTelephoneandAddressBook with vi? Choose one a. 6 b. 28 c. 25 d. 4
# A variable that you can name and assign a value to is called a _____________
variable.
# You have installed a new application but when you type in the command to start it
you get the error message Command not found. What do you need to do to fix this
problem? Choose one a. Add the directory containing the application to your path b.
Specify the directorys name whenever you run the application c. Verify that the
execute permission has been applied to the command. d. Give everyone read, write
and execute permission to the applications directory.
# You telnet into several of your servers simultaneously. During the day, you
sometimes get confused as to which telnet session is connected to which server.
Which of the following commands in your .profile file would make it obvious to which
server you are attached? Choose one a. PS1=\h: \w> b. PS1=\s: \W> c.
PS1=\!: \t> d. PS1=\a: \n>
# Which of the following environment variables determines your working directory
at the completion of a successful login? Choose one a. HOME b. BASH_ENV c. PWD
d. BLENDERDIR
# Every time you attempt to delete a file using the rm utility, the operating system
prompts you for confirmation. You know that this is not the customary behavior for
the rm command. What is wrong? Choose one a. rm has been aliased as rm -i b. The
version of rm installed on your system is incorrect. c. This is the normal behavior of
the newest version of rm. d. There is an incorrect link on your system.
# You are running out of space in your home directory. While looking for files to
delete or compress you find a large file called .bash_history and delete it. A few
days later, it is back and as large as before. What do you need to do to ensure that
its size is smaller? Choose one a. Set the HISTFILESIZE variable to a smaller number.
b. Set the HISTSIZE to a smaller number. c. Set the NOHISTFILE variable to true. d.
Set the HISTAPPEND variable to true.
# In order to display the last five commands you have entered using the history
command, you would type ___________.
# In order to display the last five commands you have entered using the fc
command, you would type ___________.
# You previously ran the find command to locate a particular file. You want to run
that command again. What would be the quickest way to do this? Choose one a. fc -l
find fc n b. history -l find history n c. Retype the command d. fc -n find
# Using command substitution, how would you display the value of the present
working directory? Choose one a. echo $(pwd) b. echo pwd c. $pwd d. pwd | echo
# You need to search the entire directory structure to locate a specific file. How
could you do this and still be able to run other commands while the find command
is still searching for your file? Choose one a. find / -name filename & b. find / -name
filename c. bg find / -name filename d. &find / -name filename &
# In order to create a file called DirContents containing the contents of the /etc
directory you would type ____________.
# What would be displayed as the result of issuing the command ps ef? Choose one
a. A listing of the users running processes formatted as a tree. b. A listing of the
stopped processes c. A listing of all the running processes formatted as a tree. d. A
listing of all system processes formatted as a tree.
# What utility can you use to show a dynamic listing of running processes?
__________
# The top utility can be used to change the priority of a running process? Another
utility that can also be used to change priority is ___________?
# What key combination can you press to suspend a running job and place it in the
background?
# You issue the command jobs and receive the following output: [1]- Stopped (tty
output) pine [2]+ Stopped (tty output) MyScript How would you bring the MyScript
process to the foreground? Choose one: a. fg %2 b. ctrl-c c. fg MyScript d. ctrl-z
# You enter the command cat MyFile | sort > DirList & and the operating system
displays [4] 3499 What does this mean? Choose one a. This is job number 4 and the
PID of the sort command is 3499. b. This is job number 4 and the PID of the job is
3499. c. This is job number 3499 and the PID of the cat command is 4. d. This is job
number 4 and the PID of the cat command is 3499.
# You attempt to log out but receive an error message that you cannot. When you
issue the jobs command, you see a process that is running in the background. How
can you fix this so that you can logout? Choose one a. Issue the kill command with
the PID of each running command of the pipeline as an argument. b. Issue the kill
command with the job number as an argument. c. Issue the kill command with the
PID of the last command as an argument. d. Issue the kill command without any
arguments.
# You have been given the job of administering a new server. It houses a database
used by the sales people. This information is changed frequently and is not
duplicated anywhere else. What should you do to ensure that this information is not
lost? Choose one a. Create a backup strategy that includes backing up this
information at least daily. b. Prepare a proposal to purchase a backup server c.
Recommend that the server be made part of a cluster. d. Install an additional hard
drive in the server.
# When planning your backup strategy you need to consider how often you will
perform a backup, how much time the backup takes and what media you will use.
What other factor must you consider when planning your backup strategy? _________
# Many factors are taken into account when planning a backup strategy. The one
most important one is how often does the file ____________.
# Which one of the following factors does not play a role in choosing the type of
backup media to use? Choose one: a. How frequently a file changes b. How long you
need to retain the backup c. How much data needs to be backed up d. How
frequently the backed up data needs to be accessed
# When you only back up one partition, this is called a ______ backup. Choose one a.
Differential b. Full c. Partial d. Copy
# When you back up only the files that have changed since the last backup, this is
called a ______ backup. Choose one a. Partial b. Differential c. Full d. Copy
# The easiest, most basic form of backing up a file is to _____ it to another location.
# When is the most important time to restore a file from your backup? Choose one
a. On a regular scheduled basis to verify that the data is available. b. When the
system crashes. c. When a user inadvertently loses a file. d. When your boss asks to
see how restoring a file works.
# As a system administrator
, you are instructed to backup all the users home directories. Which of the following
commands would accomplish this? Choose one a. tar rf usersbkup home/* b. tar cf
usersbkup home/* c. tar cbf usersbkup home/* d. tar rvf usersbkup home/*
# What is wrong with the following command? tar cvfb / /dev/tape 20 Choose one a.
You cannot use the c option with the b option. b. The correct line should be tar
-cvfb / /dev/tape20. c. The arguments are not in the same order as the
corresponding modifiers. d. The files to be backed up have not been specified.
# You need to view the contents of the tarfile called MyBackup.tar. What command
would you use? __________
# After creating a backup of the users home directories called backup.cpio you are
asked to restore a file called memo.ben. What command should you type?
# You want to create a compressed backup of the users home directories so you
issue the command gzip /home/* backup.gz but it fails. The reason that it failed is
that gzip will only compress one _______ at a time.
# You want to create a compressed backup of the users home directories. What
utility should you use?
# You routinely compress old log files. You now need to examine a log from two
months ago. In order to view its contents without first having to decompress it, use
the _________ utility.
# Which two utilities can you use to set up a job to run at a specified time? Choose
one: a. at and crond b. atrun and crontab c. at and crontab d. atd and crond
# You have written a script called usrs to parse the passwd file and create a list of
usernames. You want to have this run at 5 am tomorrow so you can see the results
when you get to work. Which of the following commands will work? Choose one: a.
at 5:00 wed usrs b. at 5:00 wed -b usrs c. at 5:00 wed -l usrs d. at 5:00 wed -d usrs
# Several of your users have been scheduling large at jobs to run during peak load
times. How can you prevent anyone from scheduling an at job? Choose one: a.
delete the file /etc/at.deny b. create an empty file called /etc/at.deny c. create two
empty files: /etc/at.deny and /etc/at.allow file d. create an empty file called
/etc/at.allow
# How can you determine who has scheduled at jobs? Choose one: a. at -l b. at -q c.
at -d d. atwho
# When defining a cronjob, there are five fields used to specify when the job will
run. What are these fields and what is the correct order? Choose one: a. minute,
hour, day of week, day of month, month b. minute, hour, month, day of month, day
of week c. minute, hour, day of month, month, day of week d. hour, minute, day of
month, month, day of week
# You have entered the following cronjob. When will it run? 15 * * * 1,3,5 myscript
Choose one: a. at 15 minutes after every hour on the 1st, 3rd and 5th of each
month. b. at 1:15 am, 3:15 am, and 5:15 am every day c. at 3:00 pm on the 1st,
3rd, and 5th of each month d. at 15 minutes after every hour every Monday,
Wednesday, and Friday
# As the system administrator you need to review Bobs cronjobs. What command
would you use? Choose one: a. crontab -lu bob b. crontab -u bob c. crontab -l d.
cronq -lu bob
# In order to schedule a cronjob, the first task is to create a text file containing the
jobs to be run along with the time they are to run. Which of the following commands
will run the script MyScript every day at 11:45 pm? Choose one: a. * 23 45 * *
MyScript b. 23 45 * * * MyScript c. 45 23 * * * MyScript d. * * * 23 45 MyScript
# Which daemon must be running in order to have any scheduled jobs run as
scheduled? Choose one: a. crond b. atd c. atrun d. crontab
# You want to ensure that your system is not overloaded with users running
multiple scheduled jobs. A policy has been established that only the system
administrators can create any scheduled jobs. It is your job to implement this policy.
How are you going to do this? Choose one: a. create an empty file called
/etc/cron.deny b. create a file called /etc/cron.allow which contains the names of
those allowed to schedule jobs. c. create a file called /etc/cron.deny containing all
regular usernames. d. create two empty files called /etc/cron.allow and
/etc/cron.deny
# You notice that your server load is exceptionally high during the hours of 10 am to
2 noon. When investigating the cause, you suspect that it may be a cron job
scheduled by one of your users. What command can you use to determine if your
suspicions are correct? Choose one: a. crontab -u b. crond -u c. crontab -l d. crond -l
# One of your users, Bob, has created a script to reindex his database. Now he has
it scheduled to run every day at 10:30 am. What command should you use to delete
this job. Choose one: a. crontab -ru bob b. crontab -u bob c. crontab -du bob d.
crontab -lu bob
# What daemon is responsible for tracking events on your system?
# What is the name and path of the default configuration file used by the syslogd
daemon?
# You have made changes to the /etc/syslog.conf file. Which of the following
commands will cause these changes to be implemented without having to reboot
your computer? Choose one: a. kill SIGHINT `cat /var/run/syslogd.pid` b. kill SIGHUP
`cat /var/run/syslogd.pid` c. kill SIGHUP syslogd d. kill SIGHINT syslogd
# Which of the following lines in your /etc/syslog.conf file will cause all critical
messages to be logged to the file /var/log/critmessages? Choose one: a. *.=crit
/var/log/critmessages b. *crit /var/log/critmessages c. *=crit /var/log/critmessages d.
*.crit /var/log/critmessages
# You wish to have all mail messages except those of type info to the
/var/log/mailmessages file. Which of the following lines in your /etc/syslogd.conf file
would accomplish this? Choose one: a. mail.*;mail!=info /var/log/mailmessages b.
mail.*;mail.=info /var/log/mailmessages c. mail.*;mail.info /var/log/mailmessages d.
mail.*;mail.!=info /var/log/mailmessages
# What is the name and path of the main system log?
# Which log contains information on currently logged in users? Choose one: a.
/var/log/utmp b. /var/log/wtmp c. /var/log/lastlog d. /var/log/messages
# You have been assigned the task of determining if there are any user accounts
defined on your system that have not been used during the last three months.
Which log file should you examine to determine this information? Choose one: a.
/var/log/wtmp b. /var/log/lastlog c. /var/log/utmp d. /var/log/messages
# You have been told to configure a method of rotating log files on your system.
Which of the following factors do you not need to consider? Choose one: a. date and
time of messages b. log size c. frequency of rotation d. amount of available disk
space
# What utility can you use to automate rotation of logs?
# You wish to rotate all your logs weekly except for the /var/log/wtmp log which you
wish to rotate monthly. How could you accomplish this. Choose one: a. Assign a
global option to rotate all logs weekly and a local option to rotate the /var/log/wtmp
log monthly. b. Assign a local option to rotate all logs weekly and a global option to
rotate the /var/log/wtmp log monthly. c. Move the /var/log/wtmp log to a different
directory. Run logrotate against the new location. d. Configure logrotate to not
rotate the /var/log/wtmp log. Rotate it manually every month.
# You have configured logrotate to rotate your logs weekly and keep them for eight
weeks. You are running our of disk space. What should you do? Choose one: a. Quit
using logrotate and manually save old logs to another location. b. Reconfigure
logrotate to only save logs for four weeks. c. Configure logrotate to save old files to
another location. d. Use the prerotate command to run a script to move the older
logs to another location.
# What command can you use to review boot messages?
# What file defines the levels of messages written to system log files?
# What account is created when you install Linux?
# While logged on as a regular user, your boss calls up and wants you to create a
new user account immediately. How can you do this without first having to close
your work, log off and logon as root? Choose one: a. Issue the command rootlog. b.
Issue the command su and type exit when finished. c. Issue the command su and
type logoff when finished. d. Issue the command logon root and type exit when
finished.
# Which file defines all users on your system? Choose one: a. /etc/passwd b.
/etc/users c. /etc/password d. /etc/user.conf
# There are seven fields in the /etc/passwd file. Which of the following lists all the
fields in the correct order? Choose one: a. username, UID, GID, home directory,
command, comment b. username, UID, GID, comment, home directory, command c.
UID, username, GID, home directory, comment, command d. username, UID, group
name, GID, home directory, comment
# Which of the following user names is invalid? Choose one: a. Theresa Hadden b.
thadden c. TheresaH d. T.H.
# In order to prevent a user from logging in, you can add a(n) ________at the
beginning of the password field.
# The beginning user identifier is defined in the _________ file.
# Which field is used to define the users default shell?
# Bob Armstrong, who has a username of boba, calls to tell you he forgot his
password. What command should you use to reset his command?
# Your company has implemented a policy that users passwords must be reset
every ninety days. Since you have over 100 users you created a file with each
username and the new password. How are you going to change the old passwords
to the new ones? Choose one: a. Use the chpasswd command along with the name
of the file containing the new passwords. b. Use the passwd command with the -f
option and the name of the file containing the new passwords. c. Open the
/etc/passwd file in a text editor and manually change each password. d. Use the
passwd command with the -u option.

Top Linux Admin Interview Questions asked in TOP IT industries

Hey Guys, AFRAID of interviews

DONT Worry prepare the following questions before Interview. I have managed to
prepare some questions sets. Practice this and i'm sure you would crack a L1/L2/L3
Linux Administrator Job Easily. All the questions are taken from the top IT brands
interviews.

Linux Admin Interview Questions and Answers, Linux Administration questions,

Linux Networking questions, MYSQL questions, bash, postfix questions, sendmail
questions, ftp server questions

Questions BANK 01

# You attempt to use shadow passwords but are unsuccessful. What

characteristic of the /etc/passwd file may cause this? Choose one:
a. The login command is missing.
b. The username is too long.
c. The password field is blank.
d. The password field is prefaced by an asterick.

# You create a new user account by adding the following line to your
/etc/passwd file. bobm:baddog:501:501:Bob Morris:/home/bobm:/bin/bash
Bob calls you and tells you that he cannot logon. You verify that he is
using the correct username and password. What is the problem? Choose
one:
a. The UID and GID cannot be identical.
b. You cannot have spaces in the line unless they are surrounded with double
quotes.
c. You cannot directly enter the password; rather you have to use the passwd
command to assign a password to the user.
d. The username is too short, it must be at least six characters long.

# Which of the following tasks is not necessary when creating a new user
by editing the /etc/passwd file? Choose one:
a. Create a link from the users home directory to the shell the user will
use.
b. Create the users home directory
c. Use the passwd command to assign a password to the account.
d. Add the user to the specified group.

# You create a new user by adding the following line to the /etc/passwd
file bobm::501:501:Bob Morris:/home/bobm:/bin/bash You then create the
users home directory and use the passwd command to set his password.
However, the user calls you and says that he cannot log on. What is the
problem? Choose one:
a. The user did not change his password.
b. bobm does not have permission to /home/bobm.
c. The user did not type his username in all caps.
d. You cannot leave the password field blank when creating a new user.

# When using useradd to create a new user account, which of the

following tasks is not done automatically. Choose one:
a. Assign a UID.
b. Assign a default shell.
c. Create the users home directory.
d. Define the users home directory.

# You issue the following command useradd -m bobm But the user cannot
logon. What is the problem? Choose one:
a. You need to assign a password to bobms account using the passwd command.
b. You need to create bobms home directory and set the appropriate permissions.
c. You need to edit the /etc/passwd file and assign a shell for bobms account.
d. The username must be at least five characters long.

# You have created special configuration files that you want copied to
each users home directories when creating new user accounts. You copy
the files to /etc/skel. Which of the following commands will make this
happen? Choose one:
a. useradd -m username
b. useradd -mk username
c. useradd -k username
d. useradd -Dk username

# Mary has recently gotten married and wants to change her username
from mstone to mknight. Which of the following commands should you run
to accomplish this? Choose one:
a. usermod -l mknight mstone
b. usermod -l mstone mknight
c. usermod -u mknight mstone
d. usermod -u mstone mknight

# After bob leaves the company you issue the command userdel bob.
Although his entry in the /etc/passwd file has been deleted, his home
directory is still there. What command could you have used to make sure
that his home directory was also deleted? Choose one:
a. userdel -m bob
b. userdel -u bob
c. userdel -l bob
d. userdel -r bob

# All groups are defined in the /etc/group file. Each entry contains four
fields in the following order. Choose one:
a. groupname, password, GID, member list
b. GID, groupname, password, member list
c. groupname, GID, password, member list
d. GID, member list, groupname, password

# You need to create a new group called sales with Bob, Mary and Joe as
members. Which of the following would accomplish this? Choose one:
a. Add the following line to the /etc/group file: sales:44:bob,mary,joe
b. Issue the command groupadd sales.
c. Issue the command groupadd -a sales bob,mary,joe
d. Add the following line to the /etc/group file: sales::44:bob,mary,joe
Linux Admin Interview Questions and Answers
Questions consists of Linux Admin Interview Questions and Answers, Linux
Administration questions, Linux Networking questions, MYSQL questions, bash,
postfix questions, sendmail questions, ftp server questions

Questions BANK 06

# What command can you use to review boot messages?

# What file defines the levels of messages written to system log files?
# What account is created when you install Linux?
# While logged on as a regular user, your boss calls up and wants you to
create a new user account immediately. How can you do this without first
having to close your work, log off and logon as root? Choose one:
a. Issue the command rootlog.
b. Issue the command su and type exit when finished.
c. Issue the command su and type logoff when finished.
d. Issue the command logon root and type exit when finished.
# Which file defines all users on your system? Choose one:
a. /etc/passwd
b. /etc/users
c. /etc/password
d. /etc/user.conf
# There are seven fields in the /etc/passwd file. Which of the following
lists all the fields in the correct order? Choose one:
a. username, UID, GID, home directory, command, comment
b. username, UID, GID, comment, home directory, command
c. UID, username, GID, home directory, comment, command
d. username, UID, group name, GID, home directory, comment
# Which of the following user names is invalid? Choose one:
a. Theresa Hadden
b. thadden
c. TheresaH
d. T.H.
# In order to prevent a user from logging in, you can add a(n) ________at
the beginning of the password field.
# The beginning user identifier is defined in the _________ file.
# Which field is used to define the users default shell?
# Bob Armstrong, who has a username of boba, calls to tell you he forgot
his password. What command should you use to reset his command?
# Your company has implemented a policy that users passwords must be
reset every ninety days. Since you have over 100 users you created a file
with each username and the new password. How are you going to change
the old passwords to the new ones? Choose one:
a. Use the chpasswd command along with the name of the file containing the new
passwords.
b. Use the passwd command with the -f option and the name of the file containing
the new passwords.
c. Open the /etc/passwd file in a text editor and manually change each password.
d. Use the passwd command with the -u option.

Under : Linux Interviews FAQ

+ Top Linux Admin Interview Questions and answers asked in TOP IT industries :
Question Bank 05 By Ashwin 06 March 2010 at 1:00 am and have No
Comments
Linux Admin Interview Questions and Answers
Questions consists of Linux Admin Interview Questions and Answers, Linux
Administration questions, Linux Networking questions, MYSQL questions, bash,
postfix questions, sendmail questions, ftp server questions

Questions BANK 05

# As the system administrator you need to review Bobs cronjobs. What

command would you use? Choose one:
a. crontab -lu bob
b. crontab -u bob
c. crontab -l
d. cronq -lu bob
# In order to schedule a cronjob, the first task is to create a text file
containing the jobs to be run along with the time they are to run. Which of
the following commands will run the script MyScript every day at 11:45
pm? Choose one:
a. * 23 45 * * MyScript
b. 23 45 * * * MyScript
c. 45 23 * * * MyScript
d. * * * 23 45 MyScript
# Which daemon must be running in order to have any scheduled jobs run
as scheduled? Choose one:
a. crond
b. atd
c. atrun
d. crontab
# You want to ensure that your system is not overloaded with users
running multiple scheduled jobs. A policy has been established that only
the system administrators can create any scheduled jobs. It is your job to
implement this policy. How are you going to do this? Choose one:
a. create an empty file called /etc/cron.deny
b. create a file called /etc/cron.allow which contains the names of those allowed to
schedule jobs.
c. create a file called /etc/cron.deny containing all regular usernames.
d. create two empty files called /etc/cron.allow and /etc/cron.deny
# You notice that your server load is exceptionally high during the hours
of 10 am to 2 noon. When investigating the cause, you suspect that it may
be a cron job scheduled by one of your users. What command can you use
to determine if your suspicions are correct? Choose one:
a. crontab -u
b. crond -u
c. crontab -l
d. crond -l
# One of your users, Bob, has created a script to reindex his database.
Now he has it scheduled to run every day at 10:30 am. What command
should you use to delete this job. Choose one:
a. crontab -ru bob
b. crontab -u bob
c. crontab -du bob
d. crontab -lu bob
# What daemon is responsible for tracking events on your system?
# What is the name and path of the default configuration file used by the
syslogd daemon?
# You have made changes to the /etc/syslog.conf file. Which of the
following commands will cause these changes to be implemented without
having to reboot your computer? Choose one:
a. kill SIGHINT `cat /var/run/syslogd.pid`
b. kill SIGHUP `cat /var/run/syslogd.pid`
c. kill SIGHUP syslogd
d. kill SIGHINT syslogd
# Which of the following lines in your /etc/syslog.conf file will cause all
critical messages to be logged to the file /var/log/critmessages? Choose
one:
a. *.=crit /var/log/critmessages
b. *crit /var/log/critmessages
c. *=crit /var/log/critmessages
d. *.crit /var/log/critmessages
# You wish to have all mail messages except those of type info to the
/var/log/mailmessages file. Which of the following lines in your
/etc/syslogd.conf file would accomplish this? Choose one:
a. mail.*;mail!=info /var/log/mailmessages
b. mail.*;mail.=info /var/log/mailmessages
c. mail.*;mail.info /var/log/mailmessages
d. mail.*;mail.!=info /var/log/mailmessages
# What is the name and path of the main system log?
# Which log contains information on currently logged in users? Choose
one:
a. /var/log/utmp
b. /var/log/wtmp
c. /var/log/lastlog
d. /var/log/messages
# You have been assigned the task of determining if there are any user accounts
defined on your system that have not been used during the last three months.
Which log file should you examine to determine this information? Choose one:
a. /var/log/wtmp
b. /var/log/lastlog
c. /var/log/utmp
d. /var/log/messages
# You have been told to configure a method of rotating log files on your
system. Which of the following factors do you not need to consider?
Choose one:
a. date and time of messages
b. log size
c. frequency of rotation
d. amount of available disk space
# What utility can you use to automate rotation of logs?
# You wish to rotate all your logs weekly except for the /var/log/wtmp log
which you wish to rotate monthly. How could you accomplish this. Choose
one:
a. Assign a global option to rotate all logs weekly and a local option to rotate the
/var/log/wtmp log monthly.
b. Assign a local option to rotate all logs weekly and a global option to rotate the
/var/log/wtmp log monthly.
c. Move the /var/log/wtmp log to a different directory. Run logrotate against the new
location.
d. Configure logrotate to not rotate the /var/log/wtmp log. Rotate it manually every
month.
# You have configured logrotate to rotate your logs weekly and keep them
for eight weeks. You are running our of disk space. What should you do?
Choose one:
a. Quit using logrotate and manually save old logs to another location.
b. Reconfigure logrotate to only save logs for four weeks.
c. Configure logrotate to save old files to another location.
d. Use the prerotate command to run a script to move the older logs to another
location.
+ Top Linux Admin Interview Questions and answers asked in TOP IT industries :
Question Bank 04 By Ashwin 05 March 2010 at 6:15 pm and have 4
Comments
Linux Admin Interview Questions and Answers
All Linux Administration questions, Linux Networking questions, MYSQL questions,
bash, postfix questions, sendmail questions, ftp server questions
Questions BANK 04
# You enter the command cat MyFile | sort > DirList & and the operating
system displays [4] 3499 What does this mean? Choose one
a. This is job number 4 and the PID of the sort command is 3499.
b. This is job number 4 and the PID of the job is 3499.
c. This is job number 3499 and the PID of the cat command is 4.
d. This is job number 4 and the PID of the cat command is 3499.
# You attempt to log out but receive an error message that you cannot.
When you issue the jobs command, you see a process that is running in
the background. How can you fix this so that you can logout? Choose one
a. Issue the kill command with the PID of each running command of the pipeline as
an argument.
b. Issue the kill command with the job number as an argument.
c. Issue the kill command with the PID of the last command as an argument.
d. Issue the kill command without any arguments.
# You have been given the job of administering a new server. It houses a
database used by the sales people. This information is changed frequently
and is not duplicated anywhere else. What should you do to ensure that
this information is not lost? Choose one
a. Create a backup strategy that includes backing up this information at least daily.
b. Prepare a proposal to purchase a backup server
c. Recommend that the server be made part of a cluster.
d. Install an additional hard drive in the server.
# When planning your backup strategy you need to consider how often
you will perform a backup, how much time the backup takes and what
media you will use. What other factor must you consider when planning
your backup strategy? _________
# Many factors are taken into account when planning a backup strategy.
The one most important one is how often does the file ____________.
# Which one of the following factors does not play a role in choosing the
type of backup media to use? Choose one:
a. How frequently a file changes
b. How long you need to retain the backup
c. How much data needs to be backed up
d. How frequently the backed up data needs to be accessed
# When you only back up one partition, this is called a ______ backup.
Choose one
a. Differential
b. Full
c. Partial
d. Copy
# When you back up only the files that have changed since the last
backup, this is called a ______ backup. Choose one
a. Partial
b. Differential
c. Full
d. Copy
# The easiest, most basic form of backing up a file is to _____ it to another
location.
# When is the most important time to restore a file from your backup?
Choose one
a. On a regular scheduled basis to verify that the data is available.
b. When the system crashes.
c. When a user inadvertently loses a file.
d. When your boss asks to see how restoring a file works.
# As a system administrator, you are instructed to backup all the users
home directories. Which of the following commands would accomplish
this? Choose one
a. tar rf usersbkup home/*
b. tar cf usersbkup home/*
c. tar cbf usersbkup home/*
d. tar rvf usersbkup home/*
# What is wrong with the following command? tar cvfb / /dev/tape 20
Choose one
a. You cannot use the c option with the b option.
b. The correct line should be tar -cvfb / /dev/tape20.
c. The arguments are not in the same order as the corresponding modifiers.
d. The files to be backed up have not been specified.
# You need to view the contents of the tarfile called MyBackup.tar. What
command would you use? __________
# After creating a backup of the users home directories called
backup.cpio you are asked to restore a file called memo.ben. What
command should you type?
# You want to create a compressed backup of the users home directories
so you issue the command gzip /home/* backup.gz but it fails. The reason
that it failed is that gzip will only compress one _______ at a time.
# You want to create a compressed backup of the users home directories.
What utility should you use?
# You routinely compress old log files. You now need to examine a log
from two months ago. In order to view its contents without first having to
decompress it, use the _________ utility.
+ Top Linux Admin Interview Questions asked in TOP IT industries : Question Bank 3
By Ashwin 05 March 2010 at 3:20 pm and have No Comments
Linux Admin Interview Questions and Answers
Questions consists of Linux Admin Interview Questions and Answers, Linux
Administration questions, Linux Networking questions, MYSQL questions, bash,
postfix questions, sendmail questions, ftp server questions

Questions BANK 03

# When typing at the command line, the default editor is the _____________
library.
# You typed the following at the command line ls -al /home/ hadden. What
key strokes would you enter to remove the space between the / and
hadden without having to retype the entire line? Choose one
a. Ctrl-B, Del
b. Esc-b, Del
c. Esc-Del, Del
d. Ctrl-b, Del
# You would like to temporarily change your command line editor to be vi.
What command should you type to change it?
# After experimenting with vi as your command line editor, you decide
that you want to have vi your default editor every time you log in. What
would be the appropriate way to do this? Choose one
a. Change the /etc/inputrc file
b. Change the /etc/profile file
c. Change the ~/.inputrc file
d. Change the ~/.profile file
# You have to type your name and title frequently throughout the day and
would like to decrease the number of key strokes you use to type this.
Which one of your configuration files would you edit to bind this
information to one of the function keys?
# In your present working directory, you have the files maryletter memo1
MyTelephoneandAddressBook What is the fewest number of keys you can
type to open the file MyTelephoneandAddressBook with vi? Choose one
a. 6
b. 28
c. 25
d. 4
# A variable that you can name and assign a value to is called a
_____________ variable.
# You have installed a new application but when you type in the command to start it
you get the error message Command not found. What do you need to do to fix this
problem? Choose one
a. Add the directory containing the application to your path
b. Specify the directorys name whenever you run the application
c. Verify that the execute permission has been applied to the command.
d. Give everyone read, write and execute permission to the applications directory.
# You telnet into several of your servers simultaneously. During the day,
you sometimes get confused as to which telnet session is connected to
which server. Which of the following commands in your .profile file would
make it obvious to which server you are attached? Choose one
a. PS1=\h: \w>
b. PS1=\s: \W>
c. PS1=\!: \t>
d. PS1=\a: \n>
# Which of the following environment variables determines your working
directory at the completion of a successful login? Choose one
a. HOME
b. BASH_ENV
c. PWD
d. BLENDERDIR
# Every time you attempt to delete a file using the rm utility, the
operating system prompts you for confirmation. You know that this is not
the customary behavior for the rm command. What is wrong? Choose one
a. rm has been aliased as rm -i
b. The version of rm installed on your system is incorrect.
c. This is the normal behavior of the newest version of rm.
d. There is an incorrect link on your system.
# You are running out of space in your home directory. While looking for
files to delete or compress you find a large file called .bash_history and
delete it. A few days later, it is back and as large as before. What do you
need to do to ensure that its size is smaller? Choose one
a. Set the HISTFILESIZE variable to a smaller number.
b. Set the HISTSIZE to a smaller number.
c. Set the NOHISTFILE variable to true.
d. Set the HISTAPPEND variable to true.
# In order to display the last five commands you have entered using the
history command, you would type ___________.
# In order to display the last five commands you have entered using the fc
command, you would type ___________.
# You previously ran the find command to locate a particular file. You want
to run that command again. What would be the quickest way to do this?
Choose one
a. fc -l find fc n
b. history -l find history n
c. Retype the command
d. fc -n find
# Using command substitution, how would you display the value of the
present working directory? Choose one
a. echo $(pwd)
b. echo pwd
c. $pwd
d. pwd | echo
# You need to search the entire directory structure to locate a specific file.
How could you do this and still be able to run other commands while the
find command is still searching for your file? Choose one
a. find / -name filename &
b. find / -name filename
c. bg find / -name filename
d. &find / -name filename &
# In order to create a file called DirContents containing the contents of
the /etc directory you would type ____________.
# What would be displayed as the result of issuing the command ps ef?
Choose one
a. A listing of the users running processes formatted as a tree.
b. A listing of the stopped processes
c. A listing of all the running processes formatted as a tree.
d. A listing of all system processes formatted as a tree.
# What utility can you use to show a dynamic listing of running processes?
__________
# The top utility can be used to change the priority of a running process?
Another utility that can also be used to change priority is ___________?
# What key combination can you press to suspend a running job and place
it in the background?
# You issue the command jobs and receive the following output: [1]-
Stopped (tty output) pine [2]+ Stopped (tty output) MyScript How would
you bring the MyScript process to the foreground? Choose one:
a. fg %2
b. ctrl-c
c. fg MyScript
d. ctrl-z

+ Top Linux Admin Interview Questions asked in TOP IT industries By Ashwin 05

March 2010 at 2:54 pm and have 3 Comments
Hey Guys, AFRAID of interviews
DONT Worry prepare the following questions before Interview. I have managed to
prepare some questions sets. Practice this and i'm sure you would crack a L1/L2/L3
Linux Administrator Job Easily. All the questions are taken from the top IT brands
interviews.
Linux Admin Interview Questions and Answers, Linux Administration questions,
Linux Networking questions, MYSQL questions, bash, postfix questions, sendmail
questions, ftp server questions
Questions BANK 01
# You attempt to use shadow passwords but are unsuccessful. What
characteristic of the /etc/passwd file may cause this? Choose one:
a. The login command is missing.
b. The username is too long.
c. The password field is blank.
d. The password field is prefaced by an asterick.
# You create a new user account by adding the following line to your
/etc/passwd file. bobm:baddog:501:501:Bob Morris:/home/bobm:/bin/bash
Bob calls you and tells you that he cannot logon. You verify that he is
using the correct username and password. What is the problem? Choose
one:
a. The UID and GID cannot be identical.
b. You cannot have spaces in the line unless they are surrounded with double
quotes.
c. You cannot directly enter the password; rather you have to use the passwd
command to assign a password to the user.
d. The username is too short, it must be at least six characters long.
# Which of the following tasks is not necessary when creating a new user
by editing the /etc/passwd file? Choose one:
a. Create a link from the users home directory to the shell the user will
use.
b. Create the users home directory
c. Use the passwd command to assign a password to the account.
d. Add the user to the specified group.
# You create a new user by adding the following line to the /etc/passwd
file bobm::501:501:Bob Morris:/home/bobm:/bin/bash You then create the
users home directory and use the passwd command to set his password.
However, the user calls you and says that he cannot log on. What is the
problem? Choose one:
a. The user did not change his password.
b. bobm does not have permission to /home/bobm.
c. The user did not type his username in all caps.
d. You cannot leave the password field blank when creating a new user.
# When using useradd to create a new user account, which of the
following tasks is not done automatically. Choose one:a. Assign a UID.
b. Assign a default shell.
c. Create the users home directory.
d. Define the users home directory.
# You issue the following command useradd -m bobm But the user cannot
logon. What is the problem? Choose one:
a. You need to assign a password to bobms account using the passwd command.
b. You need to create bobms home directory and set the appropriate permissions.
c. You need to edit the /etc/passwd file and assign a shell for bobms account.
d. The username must be at least five characters long.
# You have created special configuration files that you want copied to
each users home directories when creating new user accounts. You copy
the files to /etc/skel. Which of the following commands will make this
happen? Choose one:
a. useradd -m username
b. useradd -mk username
c. useradd -k username
d. useradd -Dk username
# Mary has recently gotten married and wants to change her username
from mstone to mknight. Which of the following commands should you run
to accomplish this? Choose one:
a. usermod -l mknight mstone
b. usermod -l mstone mknight
c. usermod -u mknight mstone
d. usermod -u mstone mknight
# After bob leaves the company you issue the command userdel bob.
Although his entry in the /etc/passwd file has been deleted, his home
directory is still there. What command could you have used to make sure
that his home directory was also deleted? Choose one:
a. userdel -m bob
b. userdel -u bob
c. userdel -l bob
d. userdel -r bob
# All groups are defined in the /etc/group file. Each entry contains four
fields in the following order. Choose one:
a. groupname, password, GID, member list
b. GID, groupname, password, member list
c. groupname, GID, password, member list
d. GID, member list, groupname, password
# You need to create a new group called sales with Bob, Mary and Joe as
members. Which of the following would accomplish this? Choose one:
a. Add the following line to the /etc/group file: sales:44:bob,mary,joe
b. Issue the command groupadd sales.
c. Issue the command groupadd -a sales bob,mary,joe
d. Add the following line to the /etc/group file: sales::44:bob,mary,joe
Linux admin interview questions
By admin | March 4, 2005

1. How do you take a single line of input from the user in a shell script?

2. Write a script to convert all DOS style backslashes to UNIX style slashes in a
list of files.

3. Write a regular expression (or sed script) to replace all occurrences of the
letter f, followed by any number of characters, followed by the letter a,
followed by one or more numeric characters, followed by the letter n, and
replace whats found with the string UNIX.

4. Write a script to list all the differences between two directories.

5. Write a program in any language you choose, to reverse a file.

6. What are the fields of the password file?

7. What does a plus at the beginning of a line in the password file signify?

8. Using the man pages, find the correct ioctl to send console output to an
arbitrary pty.

9. What is an MX record?

10.What is the prom command on a Sun that shows the SCSI devices?

11.What is the factory default SCSI target for /dev/sd0?

12.Where is that value controlled?

13.What happens to a child process that dies and has no parent process to wait
for it and whats bad about this?

14.Whats wrong with sendmail? What would you fix?

15.What command do you run to check file system consistency?

16.Whats wrong with running shutdown on a network?

17.What can be wrong with setuid scripts?

18.What value does spawn return?

19.Write a script to send mail from three other machines on the network to root
at the machine youre on. Use a here doc, but include in the mail message
the name of the machine the mail is sent from and the disk utilization
statistics on each machine?

20.Why cant root just cd to someones home directory and run a program called
a.out sitting there by typing a.out, and why is this good?

21.What is the difference between UDP and TCP?

22.What is DNS?

23.What does nslookup do?

24.How do you create a swapfile?

25.How would you check the route table on a workstation/server?

26.How do you find which ypmaster you are bound to?

27.How do you fix a problem where a printer will cutoff anything over 1MB?

28.What is the largest file system size in solaris? SunOS?

29.What are the different RAID levels?