Moc 63 U
Moc 63 U
Moc 63 U
MOC63u Specifications
Max 60 g Standard
Capacity
Min 0.02g (Easy start/Automatic end/Timed end)
0.001g Rapid drying
Minimum readability
0.01/0.1% (Selectable) (Easy start/Automatic end/Timed end)
Measurement modes
UniBloc
niBloc Moisture Analyz
Analyzer
0.15% (2g) Slow drying
Repeatability 0.05% (5g) (Easy start/Automatic end/Timed end)
MOC63u
Drying Heater Straight type halogen heater (Easy start/Automatic end/Timed end)
. Inspection of harvest . Measurement of polluted sludge Weight 4kg Data memory 100
Reliability
Stability Response
Main features
eatures of MOC63u Measurement modes of MOC63u Measurement data
Choose the right measuring mode for your application. With WindowsDirect
Easy operation
-Automatic starting mode- Large pan size Ending modes
. Automatic ending mode For food industry
Temperature
vaporization
Moisture
Automatically ends measurement when
Moisture vaporization
moisture loss over the previous 30 seconds over 30 seconds
becomes smaller than specified percentage. 30sec Measurement data of soft flour Measurement data of milk
16.00 100.00
Automatic ending
90.00
. Timed ending mode 14.00
Temperature
vaporization
Moisture
Automatically ends measurement when the 80.00
Easy-to-operate software
tware 12.00
specified amount of time has elapsed. 70.00
and key layout.
Large sample pan: 95mm
Moisture Content(%)
Moisture Content(%)
10.00
Automatic starting mode 60.00
diameter
diame Set ending time
saves measurementt time. 8.00 50.00
Temperature
vaporization
Moisture
200
Backlight display Long lifetime First dries with the highest temperature for 4.00
30.00
Temperature
vaporization
Moisture
Time (min) Time (min)
in all settings. Gently heats samples that might solidify at
Halog heater promises
Halogen the surface or samples that reduce under
you quick
q and accurate high temperature.
measurement.
meas
Compact design 5min
MOC63u is one of the most . Step drying mode T3 Soft flour Milk
Temperature
vaporization
Moisture
compact instruments in its Allows step-by-step changes in drying T2
class. Width is only 202 (mm). conditions. This feature is useful when T1
measuring samples that contain a large
amount of water. t1 t2 t3
For chemical industry Standard sample
Data management -WindowsDirect-
Measurement data of resin pellet Measurement data of the sodium tartrate dihydrate
The measurement conditions and data can Starting mode
. Automatic starting mode 0.16 18.00
be stored in MOC63u.
Starts measurement immediately after 0.14 16.00
Data IO for printer, RS-232C and USB closing the lid.
14.00
connection for PC are available as It will save time in repeated measurement. 0.12
12.00
Moisture Content(%)
Moisture Content(%)
standard. Send balance data to Excel or 0.10
10.00
other Windows applications. 0.08
8.00
0.06
6.00
0.04
4.00
Easy to remove
Resin pellet Sodium
MOC63u
UniBloc Moisture Analyzer
Main features
eatures of MOC63u Measurement modes of MOC63u Measurement data
Choose the right measuring mode for your application. With WindowsDirect
Easy operation
-Automatic starting mode- Large pan size Ending modes
. Automatic ending mode For food industry
Temperature
vaporization
Moisture
Automatically ends measurement when
Moisture vaporization
moisture loss over the previous 30 seconds over 30 seconds
becomes smaller than specified percentage. 30sec Measurement data of soft flour Measurement data of milk
16.00 100.00
Automatic ending
90.00
. Timed ending mode 14.00
Temperature
vaporization
Moisture
Automatically ends measurement when the 80.00
Easy-to-operate software
tware 12.00
specified amount of time has elapsed. 70.00
and key layout.
Large sample pan: 95mm
Moisture Content(%)
Moisture Content(%)
10.00
Automatic starting mode 60.00
diameter
diame Set ending time
saves measurementt time. 8.00 50.00
Temperature
vaporization
Moisture
200
Backlight display Long lifetime First dries with the highest temperature for 4.00
30.00
Temperature
vaporization
Moisture
Time (min) Time (min)
in all settings. Gently heats samples that might solidify at
Halog heater promises
Halogen the surface or samples that reduce under
you quick
q and accurate high temperature.
measurement.
meas
Compact design 5min
MOC63u is one of the most . Step drying mode T3 Soft flour Milk
Temperature
vaporization
Moisture
compact instruments in its Allows step-by-step changes in drying T2
class. Width is only 202 (mm). conditions. This feature is useful when T1
measuring samples that contain a large
amount of water. t1 t2 t3
For chemical industry Standard sample
Data management -WindowsDirect-
Measurement data of resin pellet Measurement data of the sodium tartrate dihydrate
The measurement conditions and data can Starting mode
. Automatic starting mode 0.16 18.00
be stored in MOC63u.
Starts measurement immediately after 0.14 16.00
Data IO for printer, RS-232C and USB closing the lid.
14.00
connection for PC are available as It will save time in repeated measurement. 0.12
12.00
Moisture Content(%)
Moisture Content(%)
standard. Send balance data to Excel or 0.10
10.00
other Windows applications. 0.08
8.00
0.06
6.00
0.04
4.00
Easy to remove
Resin pellet Sodium
MOC63u
UniBloc Moisture Analyzer
Main features
eatures of MOC63u Measurement modes of MOC63u Measurement data
Choose the right measuring mode for your application. With WindowsDirect
Easy operation
-Automatic starting mode- Large pan size Ending modes
. Automatic ending mode For food industry
Temperature
vaporization
Moisture
Automatically ends measurement when
Moisture vaporization
moisture loss over the previous 30 seconds over 30 seconds
becomes smaller than specified percentage. 30sec Measurement data of soft flour Measurement data of milk
16.00 100.00
Automatic ending
90.00
. Timed ending mode 14.00
Temperature
vaporization
Moisture
Automatically ends measurement when the 80.00
Easy-to-operate software
tware 12.00
specified amount of time has elapsed. 70.00
and key layout.
Large sample pan: 95mm
Moisture Content(%)
Moisture Content(%)
10.00
Automatic starting mode 60.00
diameter
diame Set ending time
saves measurementt time. 8.00 50.00
Temperature
vaporization
Moisture
200
Backlight display Long lifetime First dries with the highest temperature for 4.00
30.00
Temperature
vaporization
Moisture
Time (min) Time (min)
in all settings. Gently heats samples that might solidify at
Halog heater promises
Halogen the surface or samples that reduce under
you quick
q and accurate high temperature.
measurement.
meas
Compact design 5min
MOC63u is one of the most . Step drying mode T3 Soft flour Milk
Temperature
vaporization
Moisture
compact instruments in its Allows step-by-step changes in drying T2
class. Width is only 202 (mm). conditions. This feature is useful when T1
measuring samples that contain a large
amount of water. t1 t2 t3
For chemical industry Standard sample
Data management -WindowsDirect-
Measurement data of resin pellet Measurement data of the sodium tartrate dihydrate
The measurement conditions and data can Starting mode
. Automatic starting mode 0.16 18.00
be stored in MOC63u.
Starts measurement immediately after 0.14 16.00
Data IO for printer, RS-232C and USB closing the lid.
14.00
connection for PC are available as It will save time in repeated measurement. 0.12
12.00
Moisture Content(%)
Moisture Content(%)
standard. Send balance data to Excel or 0.10
10.00
other Windows applications. 0.08
8.00
0.06
6.00
0.04
4.00
Easy to remove
Resin pellet Sodium
MOC63u C054-E067
UniBloc Moisture Analyzer
MOC63u Specifications
Max 60 g Standard
Capacity
Min 0.02g (Easy start/Automatic end/Timed end)
0.001g Rapid drying
Minimum readability
0.01/0.1% (Selectable) (Easy start/Automatic end/Timed end)
Measurement modes
UniBloc
niBloc Moisture Analyz
Analyzer
0.15% (2g) Slow drying
Repeatability 0.05% (5g) (Easy start/Automatic end/Timed end)
MOC63u
Drying Heater Straight type halogen heater (Easy start/Automatic end/Timed end)
. Inspection of harvest . Measurement of polluted sludge Weight 4kg Data memory 100
Reliability
Stability Response
MOC63u Specifications
Max 60 g Standard
Capacity
Min 0.02g (Easy start/Automatic end/Timed end)
0.001g Rapid drying
Minimum readability
0.01/0.1% (Selectable) (Easy start/Automatic end/Timed end)
Measurement modes
UniBloc
niBloc Moisture Analyz
Analyzer
0.15% (2g) Slow drying
Repeatability 0.05% (5g) (Easy start/Automatic end/Timed end)
MOC63u
Drying Heater Straight type halogen heater (Easy start/Automatic end/Timed end)
. Inspection of harvest . Measurement of polluted sludge Weight 4kg Data memory 100
Reliability
Stability Response