Product Details

nCode DesignLife 11.1

Streamlining the CAE Durability Process

nCode DesignLife is an up-front design tool that identifies

critical locations and calculates realistic fatigue lives from
leading finite element (FE) results for both metals and
composites. Users can go beyond performing simplified
stress analysis and avoid under- or over-designing products
by simulating actual loading conditions to avoid costly
design changes.
DesignLife features advanced capabilities for virtual shaker
testing simulation, welds, vibration, crack growth, composites,
and thermo-mechanical fatigue analysis.

Product benefits: Product features:

Reduce reliance on physical tests and avoid costly Advanced technology including multi-axial, welds,
design and tooling changes short-fibre composite, vibration, crack growth,
Perform smarter and quicker physical tests by thermo-mechanical fatigue...
simulating first Intuitive and easy to use software for performing
fatigue analysis from finite element models
Reduce warranty claims by reducing failures
Direct support for leading FEA results data
Reduce cost and weight by assessing more
including ANSYS, Nastran, Abaqus, Altair OptiStruct,
design options
LS-Dyna and others
Improve consistency and quality with standardized Efficiently analyze large finite element models and
analysis processes complete usage schedules using multi-threaded and
Correlate directly with physical test data distributed processing
Highly configurable for the expert user
Single environment for both test and CAE data
Enables standardization of analysis processes
and reporting
Core Functionality for Advanced Fatigue Analysis

nCode DesignLife shares an environment with nCode

GlyphWorks, a graphical test data processing software
providing an unparalleled integration of test and CAE data.
Both DesignLife and GlyphWorks have specific application
to fatigue and durability analysis and can be purchased
separately or together. They can also be accessed through
nCode CDS, a licensing system that provides flexible access
to all of the nCode desktop products.

Virtual Strain Gauge is a uniquely

powerful way of correlating to
measured data.

Core Functionality
Virtual Strain Gauge Python Scripting
Enables correlation between test and finite element Unique capability that enables Python scripting to be
results. Single or rosette gauges may be graphically used to extend existing analysis capabilities rather
positioned and oriented on finite models as a than needing to code fatigue analysis from scratch.
post-processing step. Time histories due to applied Perfect for proprietary methods or research projects.
loads can then be extracted for direct correlation
Signal Processing
with your measured strain data. It also facilitates
nCode GlyphWorks Fundamentals is included for basic
the reconstruction of applied load histories from
data manipulation, analysis and visualization.
measured strain gauge data on a component.
Schedule Create
Crack Growth
Select and build multiple cases that define a duty
Provides a complete fracture mechanics capability
cycle through an intuitive interface. This feature
using industry standard methodologies for specified
makes it easy to create a complete durability
locations on FE model. Built-in growth laws include
schedule.
NASGRO, Forman, Paris, Walker and more. Select from
a provided library of geometries or supply custom Materials Manager
stress intensity factors. Enables materials data to be added, edited and
plotted. A default database with fatigue properties
for many commonly used materials is also provided.

www.ncode.com | info@hbmncode.com 2
 Product Options

Stress-Life (SN) Strain-Life (EN)

The primary application of the Stress-Life method is high- The Strain-Life method is applicable to a wide range of
cycle fatigue (long lives) where nominal stress controls problems including low-cycle fatigue where the local elastic-
the fatigue life. A wide range of methods are provided for plastic strain controls the fatigue life. The standard E-N
defining the SN curves, including the ability to interpolate method uses the Coffin-Manson-Basquin formula, defining
multiple material data curves for factors such as mean the relationship between strain amplitude a and the number
stress or temperature. Further options are also provided to of cycles to failure Nf. Material models can also be defined
account for stress gradients and surface finishes. For ultimate using general look-up curves. This enables the ability to
flexibility, Python scripting enables the definition of custom interpolate multiple material data curves for factors such as
fatigue methods and material models. mean stress or temperature.
Material models Material models
Standard SN Standard EN
SN Mean multi-curve EN Mean multi-curve
SN R-ratio multi-curve EN R-ratio multi-curve
SN Haigh multi-curve EN Temperature multi-curve
SN Temperature multi-curve
Strain combination methods or critical plane analysis
Bastenaire SN
Custom SN using Python scripting Stress-strain tracking for accurate cycle positioning
Stress combination methods or critical plane analysis Back calculation to target life
Back calculation to target life Multiaxial Damage Models
Wang Brown
Multiaxial Assessment
Wang Brown with Mean
Biaxial
3D Multiaxial Mean stress corrections
Auto-correction Morrow
Smith Watson Topper
Mean stress corrections
Interpolate multiple curves
FKM Guidelines
Goodman Plasticity Corrections
Gerber Neuber
Interpolate multiple curves Hoffman-Seeger
Seeger-Heuler
Stress gradient corrections
FKM Guidelines Multiaxial Assessment
User defined Biaxial
3D Multiaxial
Auto-correction

State-of-the-art complement of CAE durability tools.

3 www.ncode.com | info@hbmncode.com
Product Options

Seam Weld
The Seam Weld option enables the fatigue analysis of seam
welded joints, including fillet, overlap and laser welds. The
method is based on the approach developed by Volvo (see SAE
paper 982311) and validated through years of use on vehicle
chassis and body development projects. Stresses can either
be taken directly from FE models (shell or solid elements) or
calculated from grid point forces or displacements at
the weld.
DesignLife provides methods to intelligently identify weld
lines in the FE model, thus simplifying the process of setting
up the fatigue job. General material data for seam welds for
both bending and tension conditions are supplied with the
software. The approach is appropriate for weld toe, root and
Locate critical weld failures throat failures. Thick welds can also be assessed using the
stress integration method outlined in ASME Boiler & Pressure
before you even have a prototype. Vessel Code VIII (Division 2) standard. Corrections are also
available for sheet thickness and mean stress effects. The
BS7608 welding standard is also supported, together with
required material curves.

Spot Weld Adhesive Bonds

The Spot Weld option enables the fatigue analysis of spot Adhesive bonding is increasingly used in the development of
welds in thin sheets. The approach is based on the LBF lightweight vehicle bodies to give improved structural rigidity
method (see SAE paper 950711) and is well-suited to vehicle with good durability. DesignLife uses a fracture mechanics-
structure applications. The spot welds are modeled by stiff based method to assess which joints in the structure are most
beam elements (e.g., NASTRAN CBAR) and the creation of critically loaded. Adhesive bonds are modeled with beam
these welds in this form is supported by many leading FE elements and grid point forces are used to determine line
pre-processors. CWELD and ACM formulations using solid forces and moments at the edge of the glued flange. This
element representation are also supported. DesignLife can enables approximate calculations of the strain energy release
automatically identify all the related model information rate (the equivalent J-integral) to be made at the edge of the
from these welds to make job setup and solution quick and adhesive and, by comparison to the crack growth threshold,
simple. Cross-sectional forces and moments are used to a safety factor (design reserve factor) may also be calculated.
calculate structural stresses around the edge of the weld. Life J-integral values calculated for different geometries and
calculations are made around the spot weld at multiple angle loadings have been shown to provide good correlation for the
increments and the total life reported includes the worst durability of joints, particularly at longer lives, enabling useful
case. Materials data that is provided can be generally applied estimations of joint durability to be made.
to many spot weld cases. Python scripting also enables
modelling of other joining methods such as rivets or bolts.

www.ncode.com | info@hbmncode.com 4
 Product Options

Thermo-Mechanical Fatigue
Components in high temperature operating environments
such as engine pistons, exhaust systems and manifolds can
suffer from complex failure modes. The Thermo-Mechanical
Fatigue (TMF) option provides solvers for high temperature
fatigue and creep by using stress and temperature results
from finite element simulations. Mechanical loads that vary
at a different rate to the temperature variations can also be
combined. Required material data is derived from standard
constant temperature fatigue and creep tests.
Includes high temperature fatigue methods Chaboche and
ChabocheTransient. Creep analysis methods include Larson-
Miller and Chaboche creep.

Gain insight into new material performance and reduce development time.

Short Fibre Composite

The Short Fibre Composite option uses a stress-life approach
for the analysis of anisotropic materials such as glass fibre
filled thermoplastics. The stress tensor for each layer and
section integration point through the thickness is read by
DesignLife from FE results. The material orientation tensor
describing the fibre share at each calculation point and
direction is provided by mapping a manufacturing simulation
to the finite element model. This orientation tensor can be
read from the FE results file or supplied from an ASCII file.
The Short Fibre Composite analysis requires standard
materials data of typically two or more SN curves for
differing fibre orientations. DesignLife uses this data to
calculate an appropriate SN curve for each calculation point
and orientation. DesignLife capabilities such as multiple
variable amplitude loads and duty cycles are also supported
for composites.

5 www.ncode.com | info@hbmncode.com
Product Options

Fatigue and durability analysis provides valuable prediction of

product life in the real usage environment. nCode DesignLife
provides the opportunity to design for fatigue early in the design
cycle by predicting structural performance directly from FE
models - minimizing prototype tests and design costs.

Fast and direct simulations of shaker tests

in the frequency domain.

Vibration Fatigue
The Vibration Fatigue option enables the simulation of vibration
shaker tests driven by random (PSD), swept-sine, sine-dwell or
sine-on-random loading. It provides the capability to predict
fatigue in the frequency domain and it is more realistic and
efficient than time-domain analysis for many applications with
random loading such as wind and wave loads. Finite element
models are solved for frequency response or modal analysis and
the vibration loading is defined in DesignLife. This can include
the effect of temperature, static offset load cases and complete
duty cycles of combined loading.
The perfect add-on product to Vibration Fatigue is Accelerated
Testing for the ability to create a representative PSD or swept-
sine shaker vibration test based on measured data. It enables
the combination of multiple time or frequency domain data sets

Images courtesy of Valeo

into representative test spectra that accelerates the test without
exceeding realistic levels.
Radiator set up in fixture for
bench testing with realistic test
specification (red) overlaid on
Strain Gauge Positioning generic specification (blue & green)

The Strain Gauge Positioning option calculates the optimum

position and number of gauges. The correct positioning of
the gauges then facilitates the reconstruction of applied load
histories from measured strain gauge data on the component.

www.ncode.com | info@hbmncode.com 6
 Product Options

Dang Van
Dang Van is a multi-axial fatigue limit criterion and is a
method of predicting the endurance limit under complex
loading situations. The output from the analysis is expressed
as a safety factor and not a fatigue life. It uses specific
material parameters calculated from tensile and torsion
tests. Manufacturing effects can also be accounted for by
using equivalent plastic strain in the unloaded component.

Safety Factor
Safety Factor enables the calculation of stress based
factors of safety. It uses standard mean stress corrections or
user-specified Haigh diagrams to assess durability. This
method is widely used as a key design criteria for engine
and powertrain components.

Rapidly improve designs by taking advantage of hardware scalability.

Processing Thread Option

DesignLife can parallel process on machines with multiple
processors. Each Processing Thread license allows another
core to be utilized. Since the fatigue calculation at each
model location is effectively independent, the benefit to
adding additional processing threads is very scalable. This
option means spending less time to go directly from raw
inputs to finished results.

Distributed Processing Option

12000 11235
Distributed Processing enables a DesignLife analysis running
10000
in batch mode to be distributed across multiple computers or
nodes of a compute cluster. It uses the MPI standard common
Elapsed Run Time (seconds)

8000 7499
in high performance computing environments so that even
6000 5649 Run Time vs. Threads*
4537
the largest of finite element simulations can be completed
4000 3806
efficiently. This scalability enables you to rapidly solve jobs by
2000
1968
using the combined processors of many machines.
1084
482

0
4 6 8 10 12 24 48 96
Number of Threads
*Actual reduction in run-time depends on specific job

Increase simulation throughput by adding computing resources

7 www.ncode.com | info@hbmncode.com
About HBM-nCode
nCode products are provided by HBM, a world-wide technology and market leader, offering products and services across the
entire measurement spectrum, from virtual to physical. Since 1982, nCode is the leading brand for durability and data analysis
solutions. Its technologies help customers understand product performance, accelerated product development, and improve
design. The power and ease of use of HBM technologies is a direct result of its world-class development process, expertise,
and in-depth experience of a broad range of industries. nCode product development is ISO9001 certified. Product support is
available through HBM-nCode offices in Europe, North America, and Asia.
For more information, visit our website at www.ncode.com or find hbmncode on:
S2983-9.2 en