PTB 1
PTB 1
PTB 1
PTB_1
TABLE OF CONTENT:
Concise Report
2 - Input Geometry
2.1 - Principal Span Data of Uniform Spans
2.3 - Effective Width Data of Uniform Spans
2.7 - Support Width and Column Data
12 - Shear Reinforcement
12.1 - Shear Calculation Envelope
14 - Deflections
14.1 - Maximum Span Deflections
14.3 - Maximum Span Deflections
21 - Tendon Heights
23 - Detailed Moments
24 - Detailed Shears
27 - Detailed Stresses
28 - Required Post-Tensioning
29 - Detailed Rebar
35 - Detailed Deflections
35.1 - Detailed Deflections
35.3 - Detailed Deflections
Graphical Reports
PT-Force
PT-Profile
Deflection
Load Cases
Selfweight
Super Imposed Dead
Live
Other
Prestressing
Hyper-Static
Load Combinations
SERVICE_1_Min_LL
SERVICE_1_Max_LL
SERVICE_2_Min_LL
SERVICE_2_Max_LL
STRENGTH_1_Min_LL
STRENGTH_1_Max_LL
INITIAL_MIN_LL
INITIAL_MAX_LL
Cracking_Moment
Envelope
Legend
- Plan
- Elevation
- Live Load
-2000
-1000
0
Moment [kNm]
1000
2000
3000
4000
5000
6000
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
700
600
500 475.0
Tendon Height [mm]
400
300
200
100 75.00
0
Span 1
POSTTENSIONING
PROFILE
Allowable Stresses Top Max Top Min Allowable Stresses Bottom Max Bottom Min
4
3
2 2
1 0
0
-2
-1
-4
-2
Stress [N/mm]
Stress [N/mm]
-3 -6
-4
-8
-5
-10
-6
-7 -12
-8 -14
-9
-16
-10
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
B.8 Deflection
Deflection Diagrams
File: ptb-1
10
Deflection [mm]
15
-19.58
20
-25.56
25
Span 1
DEFLECTION
B.9 Quantities
CONCRETE
Total volume of concrete = 29.44 m3
Area covered = 108.21 m2
MILD STEEL
Total weight of rebar = 872.58 kg
Average rebar usage = 8.06 kg/m2, 29.64 kg/m3
PRESTRESSING MATERIAL
Total weight of tendon = 856.8 kg
Average tendon usage = 7.92 kg/m2, 29.11 kg/m3
2 - INPUT GEOMETRY
NOTE: SELFWEIGHT INCLUSION REQUIRED (SW= SELF WEIGHT Computed from geometry
input and treated as dead loading. Unit selfweight W = 2400.0 Kg/m^3
NOTE: LIVE LOADING is SKIPPED with a skip factor of 1.00
Max
kN-m kN-m kN-m kN-m kN-m kN-m kN kN
1 -908.58 0.00 514.88 0.00 -877.52 0.00 -275.55 258.54
All Tendons
Span Force Total P/A Total WBal
(%DL)
kN MPa
1 6781.78 4.23 61
Envelope of Service 2
Span Left Top Left Left Left Center Center Center Center Right TopRight Top Right Right
Max-T Top Bot Bot Top Max- Top Max- Bot Bot Max-T Max-C Bot Bot
Max-C Max-T Max-C T C Max-T Max-C Max-T Max-C
MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa
1 3.23 ----- ----- -15.39 ----- -9.24 3.77 ----- 2.61 -0.40 ----- -15.30
12 - SHEAR REINFORCEMENT
Note: "Ratio" is calculated using paired shear (V) and moment (M) design values resulting in the lowest
concrete capacity. For ACI and CSA codes, the lowest value of V*d/M is used.
Note: Sections with **** have exceeded the maximum allowable shear stress.
14 - DEFLECTIONS
Note: Deflections are calculated using effective moment of inertia of cracked sections.
15.6 Summary
Tendon Force Ext. Left Start End Ext. Elong. Left Elong Right Anchor Anchor Max
Span Span Right Left Right Stress
ratio
kN mm mm
TENDON_A 118.81 0.00 1 1 0.00 120.80 -0.00 0.67 0.72 0.73
21 - TENDON HEIGHTS
Span Type W F M a b
kN/m kN kN-m m m
1 3 322.597 0.00 1.83
1 3 322.597 16.51 18.34
1 3 -80.649 1.83 9.17
1 3 -80.649 9.17 16.51
1 4 215.52 0.00
1 4 -215.52 18.34
23 - DETAILED MOMENTS
SPAN 1
X/L X SW SDL XL LL Min LL Max PT Secondary
m kN-m kN-m kN-m kN-m kN-m kN-m kN-m
0.00 0.00 -1039.20 -2120.30 0.00 -908.58 0.00 1594.00 1809.00
0.05 0.92 -737.33 -1543.10 0.00 -661.45 0.00 1458.30 1809.00
0.10 1.83 -467.23 -991.90 0.00 -425.42 0.00 1051.40 1809.00
0.15 2.75 -228.90 -466.82 0.00 -200.49 0.00 542.76 1809.00
0.20 3.67 -22.35 -52.20 0.00 -22.83 0.00 101.94 1809.00
0.25 4.59 152.42 279.53 0.00 0.00 119.38 -271.07 1809.00
0.30 5.50 295.42 585.20 0.00 0.00 250.49 -576.26 1809.00
0.35 6.42 406.64 864.79 0.00 0.00 370.49 -813.64 1809.00
0.40 7.34 486.09 1078.70 0.00 0.00 462.41 -983.19 1809.00
0.45 8.25 533.76 1152.10 0.00 0.00 494.19 -1084.90 1809.00
0.50 9.17 549.66 1199.40 0.00 0.00 514.88 -1118.90 1809.00
24 - DETAILED SHEARS
SPAN 1
X/L X SW SDL XL LL Min LL Max PT Secondary
m kN kN kN kN kN kN kN
0.00 0.00 -346.53 -643.68 0.00 0.00 -275.55 0.01 0.00
0.05 0.92 -311.87 -615.25 0.00 0.00 -263.44 295.84 0.00
0.10 1.83 -277.22 -586.82 0.00 0.00 -251.34 591.66 0.00
0.15 2.75 -242.57 -558.40 0.00 0.00 -239.24 517.70 0.00
0.20 3.67 -207.92 -375.97 0.00 0.00 -161.13 443.75 0.00
0.25 4.59 -173.27 -347.54 0.00 0.00 -149.03 369.79 0.00
0.30 5.50 -138.62 -319.12 0.00 0.00 -136.92 295.84 0.00
0.35 6.42 -103.96 -290.69 0.00 0.00 -124.82 221.88 0.00
0.40 7.34 -69.31 -94.26 0.00 0.00 -40.71 147.93 0.00
0.45 8.25 -34.66 -65.83 0.00 0.00 -28.61 73.97 0.00
0.50 9.17 -0.01 -37.41 0.00 0.00 -16.50 0.01 0.00
0.55 10.09 34.64 171.02 0.00 73.60 0.00 -73.94 0.00
0.60 11.00 69.29 199.45 0.00 85.70 0.00 -147.90 0.00
0.65 11.92 103.95 227.87 0.00 97.81 0.00 -221.85 0.00
0.70 12.84 138.60 256.30 0.00 109.91 0.00 -295.81 0.00
0.75 13.76 173.25 284.73 0.00 122.02 0.00 -369.76 0.00
0.80 14.67 207.90 489.15 0.00 210.12 0.00 -443.72 0.00
0.85 15.59 242.55 517.58 0.00 222.23 0.00 -517.67 0.00
0.90 16.51 277.21 546.01 0.00 234.33 0.00 -591.63 0.00
0.95 17.42 311.86 574.44 0.00 246.43 0.00 -295.81 0.00
1.00 18.34 346.51 602.86 0.00 258.54 0.00 0.01 0.00
27 - DETAILED STRESSES
SPAN 1
X/L X SW SW SDL SDL BotXL Top XL LL Top LL Top LL Bot LL Bot PT TopPT Bot
Top Bot Top Bot Max-T Max-C Max-T Max-C
m MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa
0.00 0.00
0.05 0.92 3.23 -5.15 6.76 -10.77 0.00 0.00 2.90 0.00 0.00 -4.62 -10.38 6.19
0.10 1.83 2.05 -3.26 4.35 -6.92 0.00 0.00 1.86 0.00 0.00 -2.97 -8.63 3.32
0.15 2.75 1.00 -1.60 2.05 -3.26 0.00 0.00 0.88 0.00 0.00 -1.40 -6.43 -0.26
0.20 3.67 0.10 -0.16 0.23 -0.36 0.00 0.00 0.10 0.00 0.00 -0.16 -4.52 -3.36
0.25 4.59 -0.67 1.06 -1.23 1.95 0.00 0.00 0.00 -0.52 0.83 0.00 -2.91 -5.99
0.30 5.50 -1.29 2.06 -2.56 4.08 0.00 0.00 0.00 -1.10 1.75 0.00 -1.60 -8.15
0.35 6.42 -1.78 2.84 -3.79 6.04 0.00 0.00 0.00 -1.62 2.59 0.00 -0.58 -9.83
0.40 7.34 -2.13 3.39 -4.73 7.53 0.00 0.00 0.00 -2.03 3.23 0.00 0.13 -11.04
0.45 8.25 -2.34 3.73 -5.05 8.04 0.00 0.00 0.00 -2.17 3.45 0.00 0.55 -11.77
0.50 9.17 -2.41 3.84 -5.26 8.37 0.00 0.00 0.00 -2.26 3.59 0.00 0.68 -12.04
0.55 10.09 -2.34 3.73 -4.97 7.91 0.00 0.00 0.00 -2.13 3.40 0.00 0.51 -11.82
0.60 11.00 -2.13 3.39 -4.22 6.72 0.00 0.00 0.00 -1.81 2.89 0.00 0.03 -11.14
0.65 11.92 -1.78 2.84 -3.36 5.36 0.00 0.00 0.00 -1.44 2.30 0.00 -0.73 -9.98
0.70 12.84 -1.30 2.06 -2.39 3.81 0.00 0.00 0.00 -1.03 1.63 0.00 -1.80 -8.35
0.75 13.76 -0.67 1.06 -1.30 2.07 0.00 0.00 0.00 -0.56 0.89 0.00 -3.16 -6.24
0.80 14.67 0.10 -0.16 0.19 -0.30 0.00 0.00 0.08 0.00 0.00 -0.13 -4.82 -3.66
0.85 15.59 1.00 -1.60 2.21 -3.52 0.00 0.00 0.95 0.00 0.00 -1.51 -6.76 -0.59
0.90 16.51 2.05 -3.26 4.35 -6.92 0.00 0.00 1.87 0.00 0.00 -2.97 -8.96 2.98
0.95 17.42 3.23 -5.15 6.60 -10.51 0.00 0.00 2.83 0.00 0.00 -4.51 -10.72 5.85
1.00 18.34
X/L X Initial Initial Initial Initial Env-1 Env-1 Env-1 Env-1 Env-2 Env-2 Env-2 Env-2
Top Top Bot Bot Top Top Bot Bot Top Top Bot Bot
Max-T Max-C Max-T Max-C Max-T Max-C Max-T Max-C Max-T Max-C Max-T Max-C
m MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa MPa
0.00 0.00
0.05 0.92 ----- -8.70 1.98 ----- ----- -0.38 ----- -9.72 2.52 -0.38 ----- -14.34
0.10 1.83 ----- -7.88 0.55 ----- ----- -2.23 ----- -6.87 ----- -2.23 ----- -9.84
0.15 2.75 ----- -6.39 ----- -1.90 ----- -3.38 ----- -5.12 ----- -3.38 ----- -6.52
0.20 3.67 ----- -5.10 ----- -4.02 ----- -4.20 ----- -3.88 ----- -4.20 ----- -4.04
0.25 4.59 ----- -4.02 ----- -5.83 ----- -4.81 ----- -2.98 ----- -5.33 ----- -2.98
0.30 5.50 ----- -3.13 ----- -7.31 ----- -5.46 ----- -2.00 ----- -6.56 ----- -2.00
0.35 6.42 ----- -2.45 ----- -8.47 ----- -6.16 ----- -0.96 ----- -7.78 1.63 -0.96
0.40 7.34 ----- -1.98 ----- -9.30 ----- -6.72 ----- -0.12 ----- -8.75 3.11 -0.12
0.45 8.25 ----- -1.70 ----- -9.81 ----- -6.83 ----- -0.01 ----- -9.00 3.44 -0.01
0.50 9.17 ----- -1.63 ----- -10.00 ----- -6.99 0.17 ----- ----- -9.24 3.77 -----
0.55 10.09 ----- -1.76 ----- -9.87 ----- -6.80 ----- -0.19 ----- -8.93 3.21 -0.19
0.60 11.00 ----- -2.09 ----- -9.42 ----- -6.32 ----- -1.02 ----- -8.13 1.86 -1.02
0.65 11.92 ----- -2.62 ----- -8.64 ----- -5.88 ----- -1.78 ----- -7.32 0.51 -1.78
0.70 12.84 ----- -3.36 ----- -7.54 ----- -5.48 ----- -2.48 ----- -6.51 ----- -2.48
0.75 13.76 ----- -4.30 ----- -6.11 ----- -5.13 ----- -3.10 ----- -5.69 ----- -3.10
0.80 14.67 ----- -5.44 ----- -4.37 ----- -4.53 ----- -4.11 ----- -4.53 ----- -4.24
0.85 15.59 ----- -6.77 ----- -2.28 ----- -3.55 ----- -5.71 ----- -3.55 ----- -7.22
0.90 16.51 ----- -8.26 0.17 ----- ----- -2.57 ----- -7.20 ----- -2.57 ----- -10.17
0.95 17.42 ----- -9.10 1.58 ----- ----- -0.89 ----- -9.81 1.94 -0.89 ----- -14.32
1.00 18.34
28 - REQUIRED POST-TENSIONING
X/L X PT
m kN
SPAN 1
0.00 0.00 ---
0.05 0.92 6203.41
0.10 1.83 4062.69
0.15 2.75 1111.74
0.20 3.67 0.00
0.25 4.59 1119.96
0.30 5.50 4117.42
0.35 6.42 5849.97
0.40 7.34 6873.76
0.45 8.25 7093.79
0.50 9.17 7310.55
0.55 10.09 7039.61
0.60 11.00 6266.50
0.65 11.92 5299.15
0.70 12.84 3885.43
0.75 13.76 1343.72
0.80 14.67 0.00
0.85 15.59 1384.75
0.90 16.51 4236.24
0.95 17.42 6375.12
1.00 18.34 ---
29 - DETAILED REBAR
SPAN 1
X/L X Analysis Top Analysis Bot Minimum Minimum Selected Top Selected
Top Bot Bot
m mm2 mm2 mm2 mm2 mm2 mm2
0.04 0.75 2642.00 1480.00 2829.00 796.90 2829.00 1480.00
0.05 0.92 1682.00 496.80 2829.00 795.90 2829.00 795.90
0.10 1.83 0.00 0.00 2829.00 0.00 2829.00 0.00
0.15 2.75 0.00 0.00 2829.00 0.00 2829.00 0.00
0.20 3.67 0.00 0.00 0.00 0.00 0.00 0.00
0.25 4.59 0.00 0.00 0.00 0.00 0.00 0.00
0.30 5.50 0.00 0.00 0.00 0.00 0.00 0.00
0.35 6.42 0.00 960.60 0.00 2211.00 0.00 2211.00
0.40 7.34 0.00 2261.00 0.00 2211.00 0.00 2261.00
0.45 8.25 0.00 3551.00 0.00 2211.00 0.00 3551.00
0.50 9.17 0.00 3904.00 0.00 2211.00 0.00 3904.00
0.55 10.09 0.00 3393.00 0.00 2211.00 0.00 3393.00
0.60 11.00 0.00 1013.00 0.00 2211.00 0.00 2211.00
0.65 11.92 0.00 0.00 0.00 2211.00 0.00 2211.00
0.70 12.84 0.00 0.00 0.00 0.00 0.00 0.00
0.75 13.76 0.00 0.00 0.00 0.00 0.00 0.00
0.80 14.67 0.00 0.00 0.00 0.00 0.00 0.00
0.85 15.59 0.00 0.00 2829.00 0.00 2829.00 0.00
0.90 16.51 0.00 0.00 2829.00 0.00 2829.00 0.00
0.95 17.42 712.10 648.10 2829.00 506.80 2829.00 648.10
Note: Reinforcement requirements for Initial condition are included in Service block. Reinforcement requirements for
UBC combination, if selected, are included in Analysis block.
TENDON_A
X/L X Initial Longterm Final
Stress Loss Stress
m MPa MPa MPa
SPAN 1
0.00 0.00 1245.00 110.00 1136.00
0.05 0.92 1252.00 110.60 1141.00
0.10 1.83 1262.00 111.40 1152.00
0.15 2.75 1270.00 112.20 1158.00
0.20 3.67 1277.00 112.80 1165.00
0.25 4.59 1285.00 113.40 1171.00
0.30 5.50 1292.00 113.40 1178.00
0.35 6.42 1299.00 114.20 1186.00
0.40 7.34 1306.00 115.00 1191.00
0.45 8.25 1313.00 115.00 1198.00
0.50 9.17 1320.00 115.70 1205.00
0.55 10.09 1327.00 116.50 1211.00
0.60 11.00 1334.00 117.30 1218.00
0.65 11.92 1341.00 118.00 1223.00
0.70 12.84 1348.00 118.00 1230.00
0.75 13.76 1355.00 118.80 1237.00
0.80 14.67 1362.00 119.60 1242.00
0.85 15.59 1365.00 118.80 1245.00
0.90 16.51 1358.00 118.00 1240.00
0.95 17.42 1350.00 118.00 1232.00
1.00 18.34 1341.00 118.00 1223.00
SPAN 1
X/L X Demand Demand Moment Moment Demand/Cap Demand/Cap
Moment Pos Moment Neg Capacity Pos Capacity Neg acity Pos acity Neg
m kN-m kN-m kN-m kN-m
0.00 0.00 0.00 -2903.25 1846.36 -2983.88 0.00 0.97
0.04 0.75 0.00 -2903.25 2083.54 -2951.24 0.00 0.98
0.05 0.92 0.00 -2603.70 1914.00 -2813.70 0.00 0.93
0.10 1.83 0.00 -1017.75 2097.41 -2338.55 0.00 0.44
0.15 2.75 765.45 0.00 2639.84 -1922.22 0.29 0.00
0.20 3.67 1697.18 0.00 3094.44 -972.44 0.55 0.00
0.25 4.59 2635.95 0.00 3516.01 -621.87 0.75 0.00
0.30 5.50 3505.65 0.00 3870.88 -352.95 0.91 0.00
0.35 6.42 4271.85 0.00 4765.98 -253.00 0.90 0.00
0.40 7.34 4850.25 0.00 4981.46 -103.12 0.97 0.00
0.45 8.25 5079.00 0.00 5475.75 -57.84 0.93 0.00
0.50 9.17 5204.40 0.00 5633.96 -36.54 0.92 0.00
0.55 10.09 5038.95 0.00 5473.79 -48.05 0.92 0.00
0.60 11.00 4603.05 0.00 5045.87 -90.28 0.91 0.00
Note: Capacity is calculated with the rebar and PT required for the design, including user defined base reinforcement
35 - DETAILED DEFLECTIONS
SPAN 1
X/L X SW SW+PT SW+PT+SDL SW+PT+SDL LL XL Sustained Total
+Creep
m mm mm mm mm mm mm mm mm
0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.05 0.9 0.3 -0.2 0.4 1.1 0.1 0.0 1.1 1.2
0.10 1.8 1.0 -0.8 1.2 3.2 0.7 0.0 3.2 3.9
0.15 2.7 1.9 -1.6 2.3 5.9 1.5 0.0 5.9 7.4
0.20 3.6 2.9 -2.6 3.4 8.8 2.4 0.0 8.8 11.2
0.25 4.5 3.9 -3.6 4.5 11.6 3.3 0.0 11.6 15.0
0.30 5.5 4.8 -4.5 5.5 14.3 4.2 0.0 14.3 18.5
0.35 6.4 5.6 -5.3 6.4 16.6 4.9 0.0 16.6 21.5
0.40 7.3 6.2 -6.0 7.0 18.3 5.5 0.0 18.3 23.8
0.45 8.2 6.6 -6.4 7.4 19.3 5.9 0.0 19.3 25.2
0.50 9.1 6.8 -6.5 7.5 19.6 6.0 0.0 19.6 25.6
0.55 10.0 6.6 -6.4 7.3 19.1 5.8 0.0 19.1 24.9
0.60 11.0 6.2 -6.0 6.9 17.9 5.5 0.0 17.9 23.3
0.65 11.9 5.6 -5.3 6.2 16.1 4.9 0.0 16.1 20.9
0.70 12.8 4.8 -4.5 5.3 13.8 4.1 0.0 13.8 18.0
0.75 13.7 3.9 -3.6 4.3 11.2 3.3 0.0 11.2 14.5
0.80 14.6 2.9 -2.6 3.2 8.4 2.4 0.0 8.4 10.8
0.85 15.5 1.9 -1.6 2.2 5.6 1.5 0.0 5.6 7.1
0.90 16.5 1.0 -0.8 1.2 3.0 0.7 0.0 3.0 3.8
0.95 17.4 0.3 -0.2 0.4 1.0 0.1 0.0 1.0 1.1
1.00 18.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
SPAN 1
X/L X SW SW+PT SW+PT+SDL SW+PT+SDL LL XL Sustained Total
+Creep
m mm mm mm mm mm mm mm mm
0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.05 0.9 0.3 -0.2 0.4 1.1 0.1 0.0 1.1 1.2
0.10 1.8 1.0 -0.8 1.2 3.2 0.7 0.0 3.2 3.9
0.15 2.7 1.9 -1.6 2.3 5.9 1.5 0.0 5.9 7.4
0.20 3.6 2.9 -2.6 3.4 8.8 2.4 0.0 8.8 11.2
0.25 4.5 3.9 -3.6 4.5 11.6 3.3 0.0 11.6 15.0
0.30 5.5 4.8 -4.5 5.5 14.3 4.2 0.0 14.3 18.5
0.35 6.4 5.6 -5.3 6.4 16.6 4.9 0.0 16.6 21.5
0.40 7.3 6.2 -6.0 7.0 18.3 5.5 0.0 18.3 23.8
0.45 8.2 6.6 -6.4 7.4 19.3 5.9 0.0 19.3 25.2
0.50 9.1 6.8 -6.5 7.5 19.6 6.0 0.0 19.6 25.6
0.55 10.0 6.6 -6.4 7.3 19.1 5.8 0.0 19.1 24.9
0.60 11.0 6.2 -6.0 6.9 17.9 5.5 0.0 17.9 23.3
0.65 11.9 5.6 -5.3 6.2 16.1 4.9 0.0 16.1 20.9
0.70 12.8 4.8 -4.5 5.3 13.8 4.1 0.0 13.8 18.0
0.75 13.7 3.9 -3.6 4.3 11.2 3.3 0.0 11.2 14.5
0.80 14.6 2.9 -2.6 3.2 8.4 2.4 0.0 8.4 10.8
0.85 15.5 1.9 -1.6 2.2 5.6 1.5 0.0 5.6 7.1
0.90 16.5 1.0 -0.8 1.2 3.0 0.7 0.0 3.0 3.8
0.95 17.4 0.3 -0.2 0.4 1.0 0.1 0.0 1.0 1.1
1.00 18.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
SPAN 1
X/L X LL1 LL2 LL3 LL4 LL5 LL6 LL Max LL Min Creep Creep
Max Min
m mm mm mm mm mm mm mm mm mm mm
0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.05 0.9 0.1 0.0 0.1 0.1 0.1 0.0 0.1 0.0 0.0 0.0
0.10 1.8 0.7 0.0 0.7 0.7 0.7 0.0 0.7 0.0 0.0 0.0
0.15 2.7 1.5 0.0 1.5 1.5 1.5 0.0 1.5 0.0 0.0 0.0
0.20 3.6 2.4 0.0 2.4 2.4 2.4 0.0 2.4 0.0 0.0 0.0
0.25 4.5 3.3 0.0 3.3 3.3 3.3 0.0 3.3 0.0 0.0 0.0
0.30 5.5 4.2 0.0 4.2 4.2 4.2 0.0 4.2 0.0 0.0 0.0
0.35 6.4 4.9 0.0 4.9 4.9 4.9 0.0 4.9 0.0 0.0 0.0
0.40 7.3 5.5 0.0 5.5 5.5 5.5 0.0 5.5 0.0 0.0 0.0
0.45 8.2 5.9 0.0 5.9 5.9 5.9 0.0 5.9 0.0 0.0 0.0
0.50 9.1 6.0 0.0 6.0 6.0 6.0 0.0 6.0 0.0 0.0 0.0
0.55 10.0 5.8 0.0 5.8 5.8 5.8 0.0 5.8 0.0 0.0 0.0
0.60 11.0 5.5 0.0 5.5 5.5 5.5 0.0 5.5 0.0 0.0 0.0
0.65 11.9 4.9 0.0 4.9 4.9 4.9 0.0 4.9 0.0 0.0 0.0
0.70 12.8 4.1 0.0 4.1 4.1 4.1 0.0 4.1 0.0 0.0 0.0
0.75 13.7 3.3 0.0 3.3 3.3 3.3 0.0 3.3 0.0 0.0 0.0
0.80 14.6 2.4 0.0 2.4 2.4 2.4 0.0 2.4 0.0 0.0 0.0
0.85 15.5 1.5 0.0 1.5 1.5 1.5 0.0 1.5 0.0 0.0 0.0
0.90 16.5 0.7 0.0 0.7 0.7 0.7 0.0 0.7 0.0 0.0 0.0
0.95 17.4 0.1 0.0 0.1 0.1 0.1 0.0 0.1 0.0 0.0 0.0
1.00 18.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
SPAN 1
X/L X LL1 LL2 LL3 LL4 LL5 LL6 LL Max LL Min Creep Creep
Max Min
m mm mm mm mm mm mm mm mm mm mm
0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.05 0.9 0.1 0.0 0.1 0.1 0.1 0.0 0.1 0.0 0.0 0.0
0.10 1.8 0.7 0.0 0.7 0.7 0.7 0.0 0.7 0.0 0.0 0.0
0.15 2.7 1.5 0.0 1.5 1.5 1.5 0.0 1.5 0.0 0.0 0.0
0.20 3.6 2.4 0.0 2.4 2.4 2.4 0.0 2.4 0.0 0.0 0.0
0.25 4.5 3.3 0.0 3.3 3.3 3.3 0.0 3.3 0.0 0.0 0.0
0.30 5.5 4.2 0.0 4.2 4.2 4.2 0.0 4.2 0.0 0.0 0.0
0.35 6.4 4.9 0.0 4.9 4.9 4.9 0.0 4.9 0.0 0.0 0.0
0.40 7.3 5.5 0.0 5.5 5.5 5.5 0.0 5.5 0.0 0.0 0.0
0.45 8.2 5.9 0.0 5.9 5.9 5.9 0.0 5.9 0.0 0.0 0.0
0.50 9.1 6.0 0.0 6.0 6.0 6.0 0.0 6.0 0.0 0.0 0.0
0.55 10.0 5.8 0.0 5.8 5.8 5.8 0.0 5.8 0.0 0.0 0.0
0.60 11.0 5.5 0.0 5.5 5.5 5.5 0.0 5.5 0.0 0.0 0.0
0.65 11.9 4.9 0.0 4.9 4.9 4.9 0.0 4.9 0.0 0.0 0.0
0.70 12.8 4.1 0.0 4.1 4.1 4.1 0.0 4.1 0.0 0.0 0.0
0.75 13.7 3.3 0.0 3.3 3.3 3.3 0.0 3.3 0.0 0.0 0.0
0.80 14.6 2.4 0.0 2.4 2.4 2.4 0.0 2.4 0.0 0.0 0.0
0.85 15.5 1.5 0.0 1.5 1.5 1.5 0.0 1.5 0.0 0.0 0.0
0.90 16.5 0.7 0.0 0.7 0.7 0.7 0.0 0.7 0.0 0.0 0.0
0.95 17.4 0.1 0.0 0.1 0.1 0.1 0.0 0.1 0.0 0.0 0.0
1.00 18.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Post-Tensioning Diagrams
File: ptb-1
7311 7032
7000
6346
6000
5000
Post-Tensioning [kN]
4000
3000
2000
1000
0.000
0
Span 1
POSTTENSIONING
REQUIREDANDPROVIDED
700
600
500 475.0
Tendon Height [mm]
400
300
200
100 75.00
0
Span 1
POSTTENSIONING
PROFILE
Deflection Diagrams
File: ptb-1
10
Deflection [mm]
15
-19.58
20
-25.56
25
Span 1
DEFLECTION
1039
-1000
300 277.2
-800
200
-600
100
-400
Moment [kNm]
Shear [kN]
0
-200
0 -100
200 -200
400
-300
-549.7 -346.5
600
Span 1 Span 1
MOMENT SHEAR
2 2
1
Deflection [mm]
3
Stress [N/mm]
-1 4
-2 -2.410
5
-3
-4
6
-5 -5.510 -6.762
7
Span 1 Span 1
STRESS DEFLECTION
400
-1500
300
-1000 200
100
Moment [kNm]
Shear [kN]
-500 0
-100
0 -200
-300
500 -400
-500
1000
-1199 -600 -643.7
-700
Span 1 Span 1
MOMENT SHEAR
8 7.210 8.370 2
6
4
4
2
6
Deflection [mm]
Stress [N/mm]
-2 8
-4 -5.260
10
-6
-8 12
-10
-11.49 -14.04
14
-12
Span 1 Span 1
STRESS DEFLECTION
Live Load Min Live Load Max Live Load Min Live Load Max
-600 150
100
-400
50
Moment [kNm]
Shear [kN]
-200 0
-50
0.000 0.000
0
-100
200 -150
-200
400
-514.9 -250 -275.5
-275.5
-300
Span 1 Span 1
MOMENT SHEAR
2.0
2
2.5
Deflection [mm]
1
0.102 0.000 3.0
Stress [N/mm]
0 0.000
0.102 3.5
-1
4.0
-2 -2.260
4.5
-3 5.0
-4 5.5
-4.930 -5.976
-5 6.0
Span 1 Span 1
STRESS DEFLECTION
-1.0 1.0
-0.8 0.8
-0.6 0.6
-0.4 0.4
-0.2 0.2
Moment [kNm]
Shear [kN]
0.000 0.000
0 0
0.000 0.000
0.2 -0.2
0.4 -0.4
0.6 -0.6
0.8 -0.8
1.0 -1.0
Span 1 Span 1
MOMENT SHEAR
0.102 -0.8
0.10
0.102
0.09 -0.6
0.08
-0.4
0.07
-0.2
Deflection [mm]
Stress [N/mm]
0.06 0.000
0
0.05 0.000
0.2
0.04
0.4
0.03
0.6
0.02
0.01 0.8
0.000
0 1.0
0.000
Span 1 Span 1
STRESS DEFLECTION
400
-500
300
200
0 100
Moment [kNm]
Shear [kN]
0
500 -100
-200
-300
1000
-400
-500
1500 -1594 -591.6
-600
Span 1 Span 1
MOMENT SHEAR
0 -8
Stress [N/mm]
-2 -7
-6
-4
-5
-6
-4
-8 -3
-10 -10.72 -2
-12.04 -1
-12 0.000
0
Span 1 Span 1
STRESS DEFLECTION
1.0
1650
0.8
1700 0.6
0.4
1750
0.2
Moment [kNm]
Shear [kN]
1800 -1809 0.000
0
-1809 0.000
1850 -0.2
-0.4
1900
-0.6
1950 -0.8
-1.0
2000
Span 1 Span 1
MOMENT SHEAR
0 0
-1
-1
-2
-2 -3
-4
Stress [N/mm]
S tre ss [N /m m ]
-3
-5
-4 -6
-7
-5
-8
-6 -9
-10
-7
-11
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_1_Min_LL
+1.00 SW +0.00 LL_Min +1.00 SDL +0.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Moment Drawn on Tension Side
-1000
-800
-600
-400
Moment [kNm]
-200
200
400
600
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_1_Min_LL
+1.00 SW +0.00 LL_Min +1.00 SDL +0.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
3000
2500
2000
1500
1000
Rebar [mm]
500
-500
-1000
-1500
-2000
-2500
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
0 0
-1
-1
-2
-2 -3
-4
Stress [N/mm]
S tre ss [N /m m ]
-3
-5
-4 -6
-7
-5
-8
-6 -9
-10
-7
-11
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_1_Max_LL
+1.00 SW +0.00 LL_Max +1.00 SDL +0.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Moment Drawn on Tension Side
-1000
-800
-600
-400
Moment [kNm]
-200
200
400
600
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_1_Max_LL
+1.00 SW +0.00 LL_Max +1.00 SDL +0.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
3000
2500
2000
1500
1000
Rebar [mm]
500
-500
-1000
-1500
-2000
-2500
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
0 -4
-1 -6
Stress [N/mm]
S tre ss [N /m m ]
-2
-8
-3
-10
-4
-12
-5
-6 -14
-7 -16
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_2_Min_LL
+1.00 SW +1.00 LL_Min +1.00 SDL +1.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Moment Drawn on Tension Side
-1500
-1000
Moment [kNm]
-500
500
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_2_Min_LL
+1.00 SW +1.00 LL_Min +1.00 SDL +1.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
3000
2500
2000
1500
1000
Rebar [mm]
500
-500
-1000
-1500
-2000
-2500
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
-2 0
-3
-2
Stress [N/mm]
S tre ss [N /m m ]
-4
-5 -4
-6
-6
-7
-8
-8
-9 -10
-10
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_2_Max_LL
+1.00 SW +1.00 LL_Max +1.00 SDL +1.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Moment Drawn on Tension Side
-1000
-800
-600
-400
-200
Moment [kNm]
200
400
600
800
1000
1200
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: SERVICE_2_Max_LL
+1.00 SW +1.00 LL_Max +1.00 SDL +1.00 XL +1.00 PT +0.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
3000
2500
2000
1500
1000
Rebar [mm]
500
-500
-1000
-1500
-2000
-2500
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
-2000
-1000
Moment [kNm]
1000
2000
3000
4000
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: STRENGTH_1_Min_LL
+1.50 SW +1.50 LL_Min +1.50 SDL +1.50 XL +0.00 PT +1.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
3000
2500
2000
1500
1000
Rebar [mm]
500
-500
-1000
-1500
-2000
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
-1000
1000
Moment [kNm]
2000
3000
4000
5000
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: STRENGTH_1_Max_LL
+1.50 SW +1.50 LL_Max +1.50 SDL +1.50 XL +0.00 PT +1.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
0
-500
-1000
-1500
Rebar [mm]
-2000
-2500
-3000
-3500
-4000
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
-1 1
0
-2
-1
-3
-2
-4 -3
Stress [N/mm]
Stress [N/mm]
-4
-5
-5
-6
-6
-7 -7
-8
-8
-9
-9
-10
-10 -11
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: INITIAL_MIN_LL
+1.00 SW +0.00 LL_Min +0.00 SDL +0.00 XL +1.15 PT +0.00 HYP +0.00 LAT
Moment Drawn on Tension Side
-800
-600
-400
-200
Moment [kNm]
200
400
600
800
1000
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: INITIAL_MIN_LL
+1.00 SW +0.00 LL_Min +0.00 SDL +0.00 XL +1.15 PT +0.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
0
-100
-200
-300
-400
Rebar [mm]
-500
-600
-700
-800
-900
-1000
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
-1 1
0
-2
-1
-3
-2
-4 -3
Stress [N/mm]
Stress [N/mm]
-4
-5
-5
-6
-6
-7 -7
-8
-8
-9
-9
-10
-10 -11
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: INITIAL_MAX_LL
+1.00 SW +0.00 LL_Max +0.00 SDL +0.00 XL +1.15 PT +0.00 HYP +0.00 LAT
Moment Drawn on Tension Side
-800
-600
-400
-200
Moment [kNm]
200
400
600
800
1000
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: INITIAL_MAX_LL
+1.00 SW +0.00 LL_Max +0.00 SDL +0.00 XL +1.15 PT +0.00 HYP +0.00 LAT
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
0
-100
-200
-300
-400
Rebar [mm]
-500
-600
-700
-800
-900
-1000
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
0.08 0.08
0.06 0.06
0.04 0.04
0.02 0.02
S tr e s [N /m ]
S tr e s [N /m ]
0 0
-0.02 -0.02
-0.04 -0.04
-0.06 -0.06
-0.08 -0.08
-0.10 -0.10
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: Cracking_Moment
-0.08
-0.06
-0.04
-0.02
Moment [kNm]
0.02
0.04
0.06
0.08
0.10
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: Cracking_Moment
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
1.0
0.8
0.6
0.4
0.2
Rebar [mm]
-0.2
-0.4
-0.6
-0.8
-1.0
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
Allowable Stresses Top Max Top Min Allowable Stresses Bottom Max Bottom Min
4
3
2 2
1 0
0
-2
-1
-4
-2
Stress [N/mm]
Stress [N/mm]
-3 -6
-4
-8
-5
-10
-6
-7 -12
-8 -14
-9
-16
-10
SPAN 1 SPAN 1
SERVICECOMBINATIONSTRESSES
(Tensionstresspositive)
Moment Diagrams
Project: "Scon Infrastructure" / Load Case: Envelope
-2000
-1000
0
Moment [kNm]
1000
2000
3000
4000
5000
6000
SPAN 1
DESIGNMOMENT
(Momentisdrawnontensionside)
Rebar Diagrams
Project: "Scon Infrastructure" / Load Case: Cracking_Moment
Rebar Required Top Rebar Required Bottom Rebar Provided Top Rebar Provided Bottom
3000
2000
1000
Rebar [mm]
-1000
-2000
-3000
-4000
SPAN 1
REINFORCEMENT
REQUIREDANDPROVIDED
Legend (2.1):
Span C = Cantilever
Form 1 = Rectangular, 2 = T or Inverted L, 3 = I, 4 = Extended T or L section
Rh Elevation of top surface
TF Top flange
MF Middle flange
BF Bottom flange
Legend (2.7):
The Column Boundary Condition (CBC):
Fixed at both 1
Hinged at near end, fixed at far end 2
Fixed at near end, hinged at far end 3
Fixed at near end, roller with rotational fixity at far end 4
LC Lower Column
UC Upper Column
Legend (3.1):
Class: SW: Selfweight, LL: Live Load, SDL: Superimposed Dead Load, X: Other Loading
Type: U: Uniform, P: Partial Uniform, L: Line Load, M: Applied Moment
C: Concentrated Load, R: Triangle, V: Variable, T: Trapezoidal
Legend (7.1):
Type
1 = reversed parabola
2 = simple parabola with straight portion over support
3 = harped tendon
4 = straight tendon
5 = extended reversed parabola
Legend (7.2):
CGS C1: CGS of left middle point of tendon for type 5 profile
CGS C2: CGS of right middle point of tendon for type 5 profile or middle point of other types
Legend (7.3):
From: Starting span of tendon
To: End span of tendon
Extension: Extension of the tendon after last span into the next span normalized to then span length
Legend (12):
Legend (15.3):
FL: Friction loss
LTL: Long term loss
Legend (22):
TYPE
1 = Uniform 2 = Concentrated
3 = Partial Uniform 4 = Applied Moment